1 /* 2 3 8139too.c: A RealTek RTL-8139 Fast Ethernet driver for Linux. 4 5 Maintained by Jeff Garzik <jgarzik@pobox.com> 6 Copyright 2000-2002 Jeff Garzik 7 8 Much code comes from Donald Becker's rtl8139.c driver, 9 versions 1.13 and older. This driver was originally based 10 on rtl8139.c version 1.07. Header of rtl8139.c version 1.13: 11 12 -----<snip>----- 13 14 Written 1997-2001 by Donald Becker. 15 This software may be used and distributed according to the 16 terms of the GNU General Public License (GPL), incorporated 17 herein by reference. Drivers based on or derived from this 18 code fall under the GPL and must retain the authorship, 19 copyright and license notice. This file is not a complete 20 program and may only be used when the entire operating 21 system is licensed under the GPL. 22 23 This driver is for boards based on the RTL8129 and RTL8139 24 PCI ethernet chips. 25 26 The author may be reached as becker@scyld.com, or C/O Scyld 27 Computing Corporation 410 Severn Ave., Suite 210 Annapolis 28 MD 21403 29 30 Support and updates available at 31 http://www.scyld.com/network/rtl8139.html 32 33 Twister-tuning table provided by Kinston 34 <shangh@realtek.com.tw>. 35 36 -----<snip>----- 37 38 This software may be used and distributed according to the terms 39 of the GNU General Public License, incorporated herein by reference. 40 41 Contributors: 42 43 Donald Becker - he wrote the original driver, kudos to him! 44 (but please don't e-mail him for support, this isn't his driver) 45 46 Tigran Aivazian - bug fixes, skbuff free cleanup 47 48 Martin Mares - suggestions for PCI cleanup 49 50 David S. Miller - PCI DMA and softnet updates 51 52 Ernst Gill - fixes ported from BSD driver 53 54 Daniel Kobras - identified specific locations of 55 posted MMIO write bugginess 56 57 Gerard Sharp - bug fix, testing and feedback 58 59 David Ford - Rx ring wrap fix 60 61 Dan DeMaggio - swapped RTL8139 cards with me, and allowed me 62 to find and fix a crucial bug on older chipsets. 63 64 Donald Becker/Chris Butterworth/Marcus Westergren - 65 Noticed various Rx packet size-related buglets. 66 67 Santiago Garcia Mantinan - testing and feedback 68 69 Jens David - 2.2.x kernel backports 70 71 Martin Dennett - incredibly helpful insight on undocumented 72 features of the 8139 chips 73 74 Jean-Jacques Michel - bug fix 75 76 Tobias Ringström - Rx interrupt status checking suggestion 77 78 Andrew Morton - Clear blocked signals, avoid 79 buffer overrun setting current->comm. 80 81 Kalle Olavi Niemitalo - Wake-on-LAN ioctls 82 83 Robert Kuebel - Save kernel thread from dying on any signal. 84 85 Submitting bug reports: 86 87 "rtl8139-diag -mmmaaavvveefN" output 88 enable RTL8139_DEBUG below, and look at 'dmesg' or kernel log 89 90 */ 91 92 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 93 94 #define DRV_NAME "8139too" 95 #define DRV_VERSION "0.9.28" 96 97 98 #include <linux/module.h> 99 #include <linux/kernel.h> 100 #include <linux/compiler.h> 101 #include <linux/pci.h> 102 #include <linux/init.h> 103 #include <linux/interrupt.h> 104 #include <linux/netdevice.h> 105 #include <linux/etherdevice.h> 106 #include <linux/rtnetlink.h> 107 #include <linux/delay.h> 108 #include <linux/ethtool.h> 109 #include <linux/mii.h> 110 #include <linux/completion.h> 111 #include <linux/crc32.h> 112 #include <linux/io.h> 113 #include <linux/uaccess.h> 114 #include <linux/gfp.h> 115 #include <asm/irq.h> 116 117 #define RTL8139_DRIVER_NAME DRV_NAME " Fast Ethernet driver " DRV_VERSION 118 119 /* Default Message level */ 120 #define RTL8139_DEF_MSG_ENABLE (NETIF_MSG_DRV | \ 121 NETIF_MSG_PROBE | \ 122 NETIF_MSG_LINK) 123 124 125 /* define to 1, 2 or 3 to enable copious debugging info */ 126 #define RTL8139_DEBUG 0 127 128 /* define to 1 to disable lightweight runtime debugging checks */ 129 #undef RTL8139_NDEBUG 130 131 132 #ifdef RTL8139_NDEBUG 133 # define assert(expr) do {} while (0) 134 #else 135 # define assert(expr) \ 136 if (unlikely(!(expr))) { \ 137 pr_err("Assertion failed! %s,%s,%s,line=%d\n", \ 138 #expr, __FILE__, __func__, __LINE__); \ 139 } 140 #endif 141 142 143 /* A few user-configurable values. */ 144 /* media options */ 145 #define MAX_UNITS 8 146 static int media[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; 147 static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; 148 149 /* Whether to use MMIO or PIO. Default to MMIO. */ 150 #ifdef CONFIG_8139TOO_PIO 151 static bool use_io = true; 152 #else 153 static bool use_io = false; 154 #endif 155 156 /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). 157 The RTL chips use a 64 element hash table based on the Ethernet CRC. */ 158 static int multicast_filter_limit = 32; 159 160 /* bitmapped message enable number */ 161 static int debug = -1; 162 163 /* 164 * Receive ring size 165 * Warning: 64K ring has hardware issues and may lock up. 166 */ 167 #if defined(CONFIG_SH_DREAMCAST) 168 #define RX_BUF_IDX 0 /* 8K ring */ 169 #else 170 #define RX_BUF_IDX 2 /* 32K ring */ 171 #endif 172 #define RX_BUF_LEN (8192 << RX_BUF_IDX) 173 #define RX_BUF_PAD 16 174 #define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */ 175 176 #if RX_BUF_LEN == 65536 177 #define RX_BUF_TOT_LEN RX_BUF_LEN 178 #else 179 #define RX_BUF_TOT_LEN (RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD) 180 #endif 181 182 /* Number of Tx descriptor registers. */ 183 #define NUM_TX_DESC 4 184 185 /* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/ 186 #define MAX_ETH_FRAME_SIZE 1536 187 188 /* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */ 189 #define TX_BUF_SIZE MAX_ETH_FRAME_SIZE 190 #define TX_BUF_TOT_LEN (TX_BUF_SIZE * NUM_TX_DESC) 191 192 /* PCI Tuning Parameters 193 Threshold is bytes transferred to chip before transmission starts. */ 194 #define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */ 195 196 /* The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024, 7==end of packet. */ 197 #define RX_FIFO_THRESH 7 /* Rx buffer level before first PCI xfer. */ 198 #define RX_DMA_BURST 7 /* Maximum PCI burst, '6' is 1024 */ 199 #define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */ 200 #define TX_RETRY 8 /* 0-15. retries = 16 + (TX_RETRY * 16) */ 201 202 /* Operational parameters that usually are not changed. */ 203 /* Time in jiffies before concluding the transmitter is hung. */ 204 #define TX_TIMEOUT (6*HZ) 205 206 207 enum { 208 HAS_MII_XCVR = 0x010000, 209 HAS_CHIP_XCVR = 0x020000, 210 HAS_LNK_CHNG = 0x040000, 211 }; 212 213 #define RTL_NUM_STATS 4 /* number of ETHTOOL_GSTATS u64's */ 214 #define RTL_REGS_VER 1 /* version of reg. data in ETHTOOL_GREGS */ 215 #define RTL_MIN_IO_SIZE 0x80 216 #define RTL8139B_IO_SIZE 256 217 218 #define RTL8129_CAPS HAS_MII_XCVR 219 #define RTL8139_CAPS (HAS_CHIP_XCVR|HAS_LNK_CHNG) 220 221 typedef enum { 222 RTL8139 = 0, 223 RTL8129, 224 } board_t; 225 226 227 /* indexed by board_t, above */ 228 static const struct { 229 const char *name; 230 u32 hw_flags; 231 } board_info[] = { 232 { "RealTek RTL8139", RTL8139_CAPS }, 233 { "RealTek RTL8129", RTL8129_CAPS }, 234 }; 235 236 237 static const struct pci_device_id rtl8139_pci_tbl[] = { 238 {0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, 239 {0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, 240 {0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, 241 {0x1500, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, 242 {0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, 243 {0x1186, 0x1300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, 244 {0x1186, 0x1340, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, 245 {0x13d1, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, 246 {0x1259, 0xa117, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, 247 {0x1259, 0xa11e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, 248 {0x14ea, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, 249 {0x14ea, 0xab07, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, 250 {0x11db, 0x1234, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, 251 {0x1432, 0x9130, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, 252 {0x02ac, 0x1012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, 253 {0x018a, 0x0106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, 254 {0x126c, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, 255 {0x1743, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, 256 {0x021b, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, 257 258 #ifdef CONFIG_SH_SECUREEDGE5410 259 /* Bogus 8139 silicon reports 8129 without external PROM :-( */ 260 {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, 261 #endif 262 #ifdef CONFIG_8139TOO_8129 263 {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8129 }, 264 #endif 265 266 /* some crazy cards report invalid vendor ids like 267 * 0x0001 here. The other ids are valid and constant, 268 * so we simply don't match on the main vendor id. 269 */ 270 {PCI_ANY_ID, 0x8139, 0x10ec, 0x8139, 0, 0, RTL8139 }, 271 {PCI_ANY_ID, 0x8139, 0x1186, 0x1300, 0, 0, RTL8139 }, 272 {PCI_ANY_ID, 0x8139, 0x13d1, 0xab06, 0, 0, RTL8139 }, 273 274 {0,} 275 }; 276 MODULE_DEVICE_TABLE (pci, rtl8139_pci_tbl); 277 278 static struct { 279 const char str[ETH_GSTRING_LEN]; 280 } ethtool_stats_keys[] = { 281 { "early_rx" }, 282 { "tx_buf_mapped" }, 283 { "tx_timeouts" }, 284 { "rx_lost_in_ring" }, 285 }; 286 287 /* The rest of these values should never change. */ 288 289 /* Symbolic offsets to registers. */ 290 enum RTL8139_registers { 291 MAC0 = 0, /* Ethernet hardware address. */ 292 MAR0 = 8, /* Multicast filter. */ 293 TxStatus0 = 0x10, /* Transmit status (Four 32bit registers). */ 294 TxAddr0 = 0x20, /* Tx descriptors (also four 32bit). */ 295 RxBuf = 0x30, 296 ChipCmd = 0x37, 297 RxBufPtr = 0x38, 298 RxBufAddr = 0x3A, 299 IntrMask = 0x3C, 300 IntrStatus = 0x3E, 301 TxConfig = 0x40, 302 RxConfig = 0x44, 303 Timer = 0x48, /* A general-purpose counter. */ 304 RxMissed = 0x4C, /* 24 bits valid, write clears. */ 305 Cfg9346 = 0x50, 306 Config0 = 0x51, 307 Config1 = 0x52, 308 TimerInt = 0x54, 309 MediaStatus = 0x58, 310 Config3 = 0x59, 311 Config4 = 0x5A, /* absent on RTL-8139A */ 312 HltClk = 0x5B, 313 MultiIntr = 0x5C, 314 TxSummary = 0x60, 315 BasicModeCtrl = 0x62, 316 BasicModeStatus = 0x64, 317 NWayAdvert = 0x66, 318 NWayLPAR = 0x68, 319 NWayExpansion = 0x6A, 320 /* Undocumented registers, but required for proper operation. */ 321 FIFOTMS = 0x70, /* FIFO Control and test. */ 322 CSCR = 0x74, /* Chip Status and Configuration Register. */ 323 PARA78 = 0x78, 324 FlashReg = 0xD4, /* Communication with Flash ROM, four bytes. */ 325 PARA7c = 0x7c, /* Magic transceiver parameter register. */ 326 Config5 = 0xD8, /* absent on RTL-8139A */ 327 }; 328 329 enum ClearBitMasks { 330 MultiIntrClear = 0xF000, 331 ChipCmdClear = 0xE2, 332 Config1Clear = (1<<7)|(1<<6)|(1<<3)|(1<<2)|(1<<1), 333 }; 334 335 enum ChipCmdBits { 336 CmdReset = 0x10, 337 CmdRxEnb = 0x08, 338 CmdTxEnb = 0x04, 339 RxBufEmpty = 0x01, 340 }; 341 342 /* Interrupt register bits, using my own meaningful names. */ 343 enum IntrStatusBits { 344 PCIErr = 0x8000, 345 PCSTimeout = 0x4000, 346 RxFIFOOver = 0x40, 347 RxUnderrun = 0x20, 348 RxOverflow = 0x10, 349 TxErr = 0x08, 350 TxOK = 0x04, 351 RxErr = 0x02, 352 RxOK = 0x01, 353 354 RxAckBits = RxFIFOOver | RxOverflow | RxOK, 355 }; 356 357 enum TxStatusBits { 358 TxHostOwns = 0x2000, 359 TxUnderrun = 0x4000, 360 TxStatOK = 0x8000, 361 TxOutOfWindow = 0x20000000, 362 TxAborted = 0x40000000, 363 TxCarrierLost = 0x80000000, 364 }; 365 enum RxStatusBits { 366 RxMulticast = 0x8000, 367 RxPhysical = 0x4000, 368 RxBroadcast = 0x2000, 369 RxBadSymbol = 0x0020, 370 RxRunt = 0x0010, 371 RxTooLong = 0x0008, 372 RxCRCErr = 0x0004, 373 RxBadAlign = 0x0002, 374 RxStatusOK = 0x0001, 375 }; 376 377 /* Bits in RxConfig. */ 378 enum rx_mode_bits { 379 AcceptErr = 0x20, 380 AcceptRunt = 0x10, 381 AcceptBroadcast = 0x08, 382 AcceptMulticast = 0x04, 383 AcceptMyPhys = 0x02, 384 AcceptAllPhys = 0x01, 385 }; 386 387 /* Bits in TxConfig. */ 388 enum tx_config_bits { 389 /* Interframe Gap Time. Only TxIFG96 doesn't violate IEEE 802.3 */ 390 TxIFGShift = 24, 391 TxIFG84 = (0 << TxIFGShift), /* 8.4us / 840ns (10 / 100Mbps) */ 392 TxIFG88 = (1 << TxIFGShift), /* 8.8us / 880ns (10 / 100Mbps) */ 393 TxIFG92 = (2 << TxIFGShift), /* 9.2us / 920ns (10 / 100Mbps) */ 394 TxIFG96 = (3 << TxIFGShift), /* 9.6us / 960ns (10 / 100Mbps) */ 395 396 TxLoopBack = (1 << 18) | (1 << 17), /* enable loopback test mode */ 397 TxCRC = (1 << 16), /* DISABLE Tx pkt CRC append */ 398 TxClearAbt = (1 << 0), /* Clear abort (WO) */ 399 TxDMAShift = 8, /* DMA burst value (0-7) is shifted X many bits */ 400 TxRetryShift = 4, /* TXRR value (0-15) is shifted X many bits */ 401 402 TxVersionMask = 0x7C800000, /* mask out version bits 30-26, 23 */ 403 }; 404 405 /* Bits in Config1 */ 406 enum Config1Bits { 407 Cfg1_PM_Enable = 0x01, 408 Cfg1_VPD_Enable = 0x02, 409 Cfg1_PIO = 0x04, 410 Cfg1_MMIO = 0x08, 411 LWAKE = 0x10, /* not on 8139, 8139A */ 412 Cfg1_Driver_Load = 0x20, 413 Cfg1_LED0 = 0x40, 414 Cfg1_LED1 = 0x80, 415 SLEEP = (1 << 1), /* only on 8139, 8139A */ 416 PWRDN = (1 << 0), /* only on 8139, 8139A */ 417 }; 418 419 /* Bits in Config3 */ 420 enum Config3Bits { 421 Cfg3_FBtBEn = (1 << 0), /* 1 = Fast Back to Back */ 422 Cfg3_FuncRegEn = (1 << 1), /* 1 = enable CardBus Function registers */ 423 Cfg3_CLKRUN_En = (1 << 2), /* 1 = enable CLKRUN */ 424 Cfg3_CardB_En = (1 << 3), /* 1 = enable CardBus registers */ 425 Cfg3_LinkUp = (1 << 4), /* 1 = wake up on link up */ 426 Cfg3_Magic = (1 << 5), /* 1 = wake up on Magic Packet (tm) */ 427 Cfg3_PARM_En = (1 << 6), /* 0 = software can set twister parameters */ 428 Cfg3_GNTSel = (1 << 7), /* 1 = delay 1 clock from PCI GNT signal */ 429 }; 430 431 /* Bits in Config4 */ 432 enum Config4Bits { 433 LWPTN = (1 << 2), /* not on 8139, 8139A */ 434 }; 435 436 /* Bits in Config5 */ 437 enum Config5Bits { 438 Cfg5_PME_STS = (1 << 0), /* 1 = PCI reset resets PME_Status */ 439 Cfg5_LANWake = (1 << 1), /* 1 = enable LANWake signal */ 440 Cfg5_LDPS = (1 << 2), /* 0 = save power when link is down */ 441 Cfg5_FIFOAddrPtr= (1 << 3), /* Realtek internal SRAM testing */ 442 Cfg5_UWF = (1 << 4), /* 1 = accept unicast wakeup frame */ 443 Cfg5_MWF = (1 << 5), /* 1 = accept multicast wakeup frame */ 444 Cfg5_BWF = (1 << 6), /* 1 = accept broadcast wakeup frame */ 445 }; 446 447 enum RxConfigBits { 448 /* rx fifo threshold */ 449 RxCfgFIFOShift = 13, 450 RxCfgFIFONone = (7 << RxCfgFIFOShift), 451 452 /* Max DMA burst */ 453 RxCfgDMAShift = 8, 454 RxCfgDMAUnlimited = (7 << RxCfgDMAShift), 455 456 /* rx ring buffer length */ 457 RxCfgRcv8K = 0, 458 RxCfgRcv16K = (1 << 11), 459 RxCfgRcv32K = (1 << 12), 460 RxCfgRcv64K = (1 << 11) | (1 << 12), 461 462 /* Disable packet wrap at end of Rx buffer. (not possible with 64k) */ 463 RxNoWrap = (1 << 7), 464 }; 465 466 /* Twister tuning parameters from RealTek. 467 Completely undocumented, but required to tune bad links on some boards. */ 468 enum CSCRBits { 469 CSCR_LinkOKBit = 0x0400, 470 CSCR_LinkChangeBit = 0x0800, 471 CSCR_LinkStatusBits = 0x0f000, 472 CSCR_LinkDownOffCmd = 0x003c0, 473 CSCR_LinkDownCmd = 0x0f3c0, 474 }; 475 476 enum Cfg9346Bits { 477 Cfg9346_Lock = 0x00, 478 Cfg9346_Unlock = 0xC0, 479 }; 480 481 typedef enum { 482 CH_8139 = 0, 483 CH_8139_K, 484 CH_8139A, 485 CH_8139A_G, 486 CH_8139B, 487 CH_8130, 488 CH_8139C, 489 CH_8100, 490 CH_8100B_8139D, 491 CH_8101, 492 } chip_t; 493 494 enum chip_flags { 495 HasHltClk = (1 << 0), 496 HasLWake = (1 << 1), 497 }; 498 499 #define HW_REVID(b30, b29, b28, b27, b26, b23, b22) \ 500 (b30<<30 | b29<<29 | b28<<28 | b27<<27 | b26<<26 | b23<<23 | b22<<22) 501 #define HW_REVID_MASK HW_REVID(1, 1, 1, 1, 1, 1, 1) 502 503 /* directly indexed by chip_t, above */ 504 static const struct { 505 const char *name; 506 u32 version; /* from RTL8139C/RTL8139D docs */ 507 u32 flags; 508 } rtl_chip_info[] = { 509 { "RTL-8139", 510 HW_REVID(1, 0, 0, 0, 0, 0, 0), 511 HasHltClk, 512 }, 513 514 { "RTL-8139 rev K", 515 HW_REVID(1, 1, 0, 0, 0, 0, 0), 516 HasHltClk, 517 }, 518 519 { "RTL-8139A", 520 HW_REVID(1, 1, 1, 0, 0, 0, 0), 521 HasHltClk, /* XXX undocumented? */ 522 }, 523 524 { "RTL-8139A rev G", 525 HW_REVID(1, 1, 1, 0, 0, 1, 0), 526 HasHltClk, /* XXX undocumented? */ 527 }, 528 529 { "RTL-8139B", 530 HW_REVID(1, 1, 1, 1, 0, 0, 0), 531 HasLWake, 532 }, 533 534 { "RTL-8130", 535 HW_REVID(1, 1, 1, 1, 1, 0, 0), 536 HasLWake, 537 }, 538 539 { "RTL-8139C", 540 HW_REVID(1, 1, 1, 0, 1, 0, 0), 541 HasLWake, 542 }, 543 544 { "RTL-8100", 545 HW_REVID(1, 1, 1, 1, 0, 1, 0), 546 HasLWake, 547 }, 548 549 { "RTL-8100B/8139D", 550 HW_REVID(1, 1, 1, 0, 1, 0, 1), 551 HasHltClk /* XXX undocumented? */ 552 | HasLWake, 553 }, 554 555 { "RTL-8101", 556 HW_REVID(1, 1, 1, 0, 1, 1, 1), 557 HasLWake, 558 }, 559 }; 560 561 struct rtl_extra_stats { 562 unsigned long early_rx; 563 unsigned long tx_buf_mapped; 564 unsigned long tx_timeouts; 565 unsigned long rx_lost_in_ring; 566 }; 567 568 struct rtl8139_stats { 569 u64 packets; 570 u64 bytes; 571 struct u64_stats_sync syncp; 572 }; 573 574 struct rtl8139_private { 575 void __iomem *mmio_addr; 576 int drv_flags; 577 struct pci_dev *pci_dev; 578 u32 msg_enable; 579 struct napi_struct napi; 580 struct net_device *dev; 581 582 unsigned char *rx_ring; 583 unsigned int cur_rx; /* RX buf index of next pkt */ 584 struct rtl8139_stats rx_stats; 585 dma_addr_t rx_ring_dma; 586 587 unsigned int tx_flag; 588 unsigned long cur_tx; 589 unsigned long dirty_tx; 590 struct rtl8139_stats tx_stats; 591 unsigned char *tx_buf[NUM_TX_DESC]; /* Tx bounce buffers */ 592 unsigned char *tx_bufs; /* Tx bounce buffer region. */ 593 dma_addr_t tx_bufs_dma; 594 595 signed char phys[4]; /* MII device addresses. */ 596 597 /* Twister tune state. */ 598 char twistie, twist_row, twist_col; 599 600 unsigned int watchdog_fired : 1; 601 unsigned int default_port : 4; /* Last dev->if_port value. */ 602 unsigned int have_thread : 1; 603 604 spinlock_t lock; 605 spinlock_t rx_lock; 606 607 chip_t chipset; 608 u32 rx_config; 609 struct rtl_extra_stats xstats; 610 611 struct delayed_work thread; 612 613 struct mii_if_info mii; 614 unsigned int regs_len; 615 unsigned long fifo_copy_timeout; 616 }; 617 618 MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>"); 619 MODULE_DESCRIPTION ("RealTek RTL-8139 Fast Ethernet driver"); 620 MODULE_LICENSE("GPL"); 621 MODULE_VERSION(DRV_VERSION); 622 623 module_param(use_io, bool, 0); 624 MODULE_PARM_DESC(use_io, "Force use of I/O access mode. 0=MMIO 1=PIO"); 625 module_param(multicast_filter_limit, int, 0); 626 module_param_array(media, int, NULL, 0); 627 module_param_array(full_duplex, int, NULL, 0); 628 module_param(debug, int, 0); 629 MODULE_PARM_DESC (debug, "8139too bitmapped message enable number"); 630 MODULE_PARM_DESC (multicast_filter_limit, "8139too maximum number of filtered multicast addresses"); 631 MODULE_PARM_DESC (media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps"); 632 MODULE_PARM_DESC (full_duplex, "8139too: Force full duplex for board(s) (1)"); 633 634 static int read_eeprom (void __iomem *ioaddr, int location, int addr_len); 635 static int rtl8139_open (struct net_device *dev); 636 static int mdio_read (struct net_device *dev, int phy_id, int location); 637 static void mdio_write (struct net_device *dev, int phy_id, int location, 638 int val); 639 static void rtl8139_start_thread(struct rtl8139_private *tp); 640 static void rtl8139_tx_timeout (struct net_device *dev); 641 static void rtl8139_init_ring (struct net_device *dev); 642 static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb, 643 struct net_device *dev); 644 #ifdef CONFIG_NET_POLL_CONTROLLER 645 static void rtl8139_poll_controller(struct net_device *dev); 646 #endif 647 static int rtl8139_set_mac_address(struct net_device *dev, void *p); 648 static int rtl8139_poll(struct napi_struct *napi, int budget); 649 static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance); 650 static int rtl8139_close (struct net_device *dev); 651 static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd); 652 static struct rtnl_link_stats64 *rtl8139_get_stats64(struct net_device *dev, 653 struct rtnl_link_stats64 654 *stats); 655 static void rtl8139_set_rx_mode (struct net_device *dev); 656 static void __set_rx_mode (struct net_device *dev); 657 static void rtl8139_hw_start (struct net_device *dev); 658 static void rtl8139_thread (struct work_struct *work); 659 static void rtl8139_tx_timeout_task(struct work_struct *work); 660 static const struct ethtool_ops rtl8139_ethtool_ops; 661 662 /* write MMIO register, with flush */ 663 /* Flush avoids rtl8139 bug w/ posted MMIO writes */ 664 #define RTL_W8_F(reg, val8) do { iowrite8 ((val8), ioaddr + (reg)); ioread8 (ioaddr + (reg)); } while (0) 665 #define RTL_W16_F(reg, val16) do { iowrite16 ((val16), ioaddr + (reg)); ioread16 (ioaddr + (reg)); } while (0) 666 #define RTL_W32_F(reg, val32) do { iowrite32 ((val32), ioaddr + (reg)); ioread32 (ioaddr + (reg)); } while (0) 667 668 /* write MMIO register */ 669 #define RTL_W8(reg, val8) iowrite8 ((val8), ioaddr + (reg)) 670 #define RTL_W16(reg, val16) iowrite16 ((val16), ioaddr + (reg)) 671 #define RTL_W32(reg, val32) iowrite32 ((val32), ioaddr + (reg)) 672 673 /* read MMIO register */ 674 #define RTL_R8(reg) ioread8 (ioaddr + (reg)) 675 #define RTL_R16(reg) ioread16 (ioaddr + (reg)) 676 #define RTL_R32(reg) ioread32 (ioaddr + (reg)) 677 678 679 static const u16 rtl8139_intr_mask = 680 PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver | 681 TxErr | TxOK | RxErr | RxOK; 682 683 static const u16 rtl8139_norx_intr_mask = 684 PCIErr | PCSTimeout | RxUnderrun | 685 TxErr | TxOK | RxErr ; 686 687 #if RX_BUF_IDX == 0 688 static const unsigned int rtl8139_rx_config = 689 RxCfgRcv8K | RxNoWrap | 690 (RX_FIFO_THRESH << RxCfgFIFOShift) | 691 (RX_DMA_BURST << RxCfgDMAShift); 692 #elif RX_BUF_IDX == 1 693 static const unsigned int rtl8139_rx_config = 694 RxCfgRcv16K | RxNoWrap | 695 (RX_FIFO_THRESH << RxCfgFIFOShift) | 696 (RX_DMA_BURST << RxCfgDMAShift); 697 #elif RX_BUF_IDX == 2 698 static const unsigned int rtl8139_rx_config = 699 RxCfgRcv32K | RxNoWrap | 700 (RX_FIFO_THRESH << RxCfgFIFOShift) | 701 (RX_DMA_BURST << RxCfgDMAShift); 702 #elif RX_BUF_IDX == 3 703 static const unsigned int rtl8139_rx_config = 704 RxCfgRcv64K | 705 (RX_FIFO_THRESH << RxCfgFIFOShift) | 706 (RX_DMA_BURST << RxCfgDMAShift); 707 #else 708 #error "Invalid configuration for 8139_RXBUF_IDX" 709 #endif 710 711 static const unsigned int rtl8139_tx_config = 712 TxIFG96 | (TX_DMA_BURST << TxDMAShift) | (TX_RETRY << TxRetryShift); 713 714 static void __rtl8139_cleanup_dev (struct net_device *dev) 715 { 716 struct rtl8139_private *tp = netdev_priv(dev); 717 struct pci_dev *pdev; 718 719 assert (dev != NULL); 720 assert (tp->pci_dev != NULL); 721 pdev = tp->pci_dev; 722 723 if (tp->mmio_addr) 724 pci_iounmap (pdev, tp->mmio_addr); 725 726 /* it's ok to call this even if we have no regions to free */ 727 pci_release_regions (pdev); 728 729 free_netdev(dev); 730 } 731 732 733 static void rtl8139_chip_reset (void __iomem *ioaddr) 734 { 735 int i; 736 737 /* Soft reset the chip. */ 738 RTL_W8 (ChipCmd, CmdReset); 739 740 /* Check that the chip has finished the reset. */ 741 for (i = 1000; i > 0; i--) { 742 barrier(); 743 if ((RTL_R8 (ChipCmd) & CmdReset) == 0) 744 break; 745 udelay (10); 746 } 747 } 748 749 750 static struct net_device *rtl8139_init_board(struct pci_dev *pdev) 751 { 752 struct device *d = &pdev->dev; 753 void __iomem *ioaddr; 754 struct net_device *dev; 755 struct rtl8139_private *tp; 756 u8 tmp8; 757 int rc, disable_dev_on_err = 0; 758 unsigned int i, bar; 759 unsigned long io_len; 760 u32 version; 761 static const struct { 762 unsigned long mask; 763 char *type; 764 } res[] = { 765 { IORESOURCE_IO, "PIO" }, 766 { IORESOURCE_MEM, "MMIO" } 767 }; 768 769 assert (pdev != NULL); 770 771 /* dev and priv zeroed in alloc_etherdev */ 772 dev = alloc_etherdev (sizeof (*tp)); 773 if (dev == NULL) 774 return ERR_PTR(-ENOMEM); 775 776 SET_NETDEV_DEV(dev, &pdev->dev); 777 778 tp = netdev_priv(dev); 779 tp->pci_dev = pdev; 780 781 /* enable device (incl. PCI PM wakeup and hotplug setup) */ 782 rc = pci_enable_device (pdev); 783 if (rc) 784 goto err_out; 785 786 rc = pci_request_regions (pdev, DRV_NAME); 787 if (rc) 788 goto err_out; 789 disable_dev_on_err = 1; 790 791 pci_set_master (pdev); 792 793 u64_stats_init(&tp->rx_stats.syncp); 794 u64_stats_init(&tp->tx_stats.syncp); 795 796 retry: 797 /* PIO bar register comes first. */ 798 bar = !use_io; 799 800 io_len = pci_resource_len(pdev, bar); 801 802 dev_dbg(d, "%s region size = 0x%02lX\n", res[bar].type, io_len); 803 804 if (!(pci_resource_flags(pdev, bar) & res[bar].mask)) { 805 dev_err(d, "region #%d not a %s resource, aborting\n", bar, 806 res[bar].type); 807 rc = -ENODEV; 808 goto err_out; 809 } 810 if (io_len < RTL_MIN_IO_SIZE) { 811 dev_err(d, "Invalid PCI %s region size(s), aborting\n", 812 res[bar].type); 813 rc = -ENODEV; 814 goto err_out; 815 } 816 817 ioaddr = pci_iomap(pdev, bar, 0); 818 if (!ioaddr) { 819 dev_err(d, "cannot map %s\n", res[bar].type); 820 if (!use_io) { 821 use_io = true; 822 goto retry; 823 } 824 rc = -ENODEV; 825 goto err_out; 826 } 827 tp->regs_len = io_len; 828 tp->mmio_addr = ioaddr; 829 830 /* Bring old chips out of low-power mode. */ 831 RTL_W8 (HltClk, 'R'); 832 833 /* check for missing/broken hardware */ 834 if (RTL_R32 (TxConfig) == 0xFFFFFFFF) { 835 dev_err(&pdev->dev, "Chip not responding, ignoring board\n"); 836 rc = -EIO; 837 goto err_out; 838 } 839 840 /* identify chip attached to board */ 841 version = RTL_R32 (TxConfig) & HW_REVID_MASK; 842 for (i = 0; i < ARRAY_SIZE (rtl_chip_info); i++) 843 if (version == rtl_chip_info[i].version) { 844 tp->chipset = i; 845 goto match; 846 } 847 848 /* if unknown chip, assume array element #0, original RTL-8139 in this case */ 849 i = 0; 850 dev_dbg(&pdev->dev, "unknown chip version, assuming RTL-8139\n"); 851 dev_dbg(&pdev->dev, "TxConfig = 0x%x\n", RTL_R32 (TxConfig)); 852 tp->chipset = 0; 853 854 match: 855 pr_debug("chipset id (%d) == index %d, '%s'\n", 856 version, i, rtl_chip_info[i].name); 857 858 if (tp->chipset >= CH_8139B) { 859 u8 new_tmp8 = tmp8 = RTL_R8 (Config1); 860 pr_debug("PCI PM wakeup\n"); 861 if ((rtl_chip_info[tp->chipset].flags & HasLWake) && 862 (tmp8 & LWAKE)) 863 new_tmp8 &= ~LWAKE; 864 new_tmp8 |= Cfg1_PM_Enable; 865 if (new_tmp8 != tmp8) { 866 RTL_W8 (Cfg9346, Cfg9346_Unlock); 867 RTL_W8 (Config1, tmp8); 868 RTL_W8 (Cfg9346, Cfg9346_Lock); 869 } 870 if (rtl_chip_info[tp->chipset].flags & HasLWake) { 871 tmp8 = RTL_R8 (Config4); 872 if (tmp8 & LWPTN) { 873 RTL_W8 (Cfg9346, Cfg9346_Unlock); 874 RTL_W8 (Config4, tmp8 & ~LWPTN); 875 RTL_W8 (Cfg9346, Cfg9346_Lock); 876 } 877 } 878 } else { 879 pr_debug("Old chip wakeup\n"); 880 tmp8 = RTL_R8 (Config1); 881 tmp8 &= ~(SLEEP | PWRDN); 882 RTL_W8 (Config1, tmp8); 883 } 884 885 rtl8139_chip_reset (ioaddr); 886 887 return dev; 888 889 err_out: 890 __rtl8139_cleanup_dev (dev); 891 if (disable_dev_on_err) 892 pci_disable_device (pdev); 893 return ERR_PTR(rc); 894 } 895 896 static int rtl8139_set_features(struct net_device *dev, netdev_features_t features) 897 { 898 struct rtl8139_private *tp = netdev_priv(dev); 899 unsigned long flags; 900 netdev_features_t changed = features ^ dev->features; 901 void __iomem *ioaddr = tp->mmio_addr; 902 903 if (!(changed & (NETIF_F_RXALL))) 904 return 0; 905 906 spin_lock_irqsave(&tp->lock, flags); 907 908 if (changed & NETIF_F_RXALL) { 909 int rx_mode = tp->rx_config; 910 if (features & NETIF_F_RXALL) 911 rx_mode |= (AcceptErr | AcceptRunt); 912 else 913 rx_mode &= ~(AcceptErr | AcceptRunt); 914 tp->rx_config = rtl8139_rx_config | rx_mode; 915 RTL_W32_F(RxConfig, tp->rx_config); 916 } 917 918 spin_unlock_irqrestore(&tp->lock, flags); 919 920 return 0; 921 } 922 923 static const struct net_device_ops rtl8139_netdev_ops = { 924 .ndo_open = rtl8139_open, 925 .ndo_stop = rtl8139_close, 926 .ndo_get_stats64 = rtl8139_get_stats64, 927 .ndo_change_mtu = eth_change_mtu, 928 .ndo_validate_addr = eth_validate_addr, 929 .ndo_set_mac_address = rtl8139_set_mac_address, 930 .ndo_start_xmit = rtl8139_start_xmit, 931 .ndo_set_rx_mode = rtl8139_set_rx_mode, 932 .ndo_do_ioctl = netdev_ioctl, 933 .ndo_tx_timeout = rtl8139_tx_timeout, 934 #ifdef CONFIG_NET_POLL_CONTROLLER 935 .ndo_poll_controller = rtl8139_poll_controller, 936 #endif 937 .ndo_set_features = rtl8139_set_features, 938 }; 939 940 static int rtl8139_init_one(struct pci_dev *pdev, 941 const struct pci_device_id *ent) 942 { 943 struct net_device *dev = NULL; 944 struct rtl8139_private *tp; 945 int i, addr_len, option; 946 void __iomem *ioaddr; 947 static int board_idx = -1; 948 949 assert (pdev != NULL); 950 assert (ent != NULL); 951 952 board_idx++; 953 954 /* when we're built into the kernel, the driver version message 955 * is only printed if at least one 8139 board has been found 956 */ 957 #ifndef MODULE 958 { 959 static int printed_version; 960 if (!printed_version++) 961 pr_info(RTL8139_DRIVER_NAME "\n"); 962 } 963 #endif 964 965 if (pdev->vendor == PCI_VENDOR_ID_REALTEK && 966 pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision >= 0x20) { 967 dev_info(&pdev->dev, 968 "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip, use 8139cp\n", 969 pdev->vendor, pdev->device, pdev->revision); 970 return -ENODEV; 971 } 972 973 if (pdev->vendor == PCI_VENDOR_ID_REALTEK && 974 pdev->device == PCI_DEVICE_ID_REALTEK_8139 && 975 pdev->subsystem_vendor == PCI_VENDOR_ID_ATHEROS && 976 pdev->subsystem_device == PCI_DEVICE_ID_REALTEK_8139) { 977 pr_info("OQO Model 2 detected. Forcing PIO\n"); 978 use_io = 1; 979 } 980 981 dev = rtl8139_init_board (pdev); 982 if (IS_ERR(dev)) 983 return PTR_ERR(dev); 984 985 assert (dev != NULL); 986 tp = netdev_priv(dev); 987 tp->dev = dev; 988 989 ioaddr = tp->mmio_addr; 990 assert (ioaddr != NULL); 991 992 addr_len = read_eeprom (ioaddr, 0, 8) == 0x8129 ? 8 : 6; 993 for (i = 0; i < 3; i++) 994 ((__le16 *) (dev->dev_addr))[i] = 995 cpu_to_le16(read_eeprom (ioaddr, i + 7, addr_len)); 996 997 /* The Rtl8139-specific entries in the device structure. */ 998 dev->netdev_ops = &rtl8139_netdev_ops; 999 dev->ethtool_ops = &rtl8139_ethtool_ops; 1000 dev->watchdog_timeo = TX_TIMEOUT; 1001 netif_napi_add(dev, &tp->napi, rtl8139_poll, 64); 1002 1003 /* note: the hardware is not capable of sg/csum/highdma, however 1004 * through the use of skb_copy_and_csum_dev we enable these 1005 * features 1006 */ 1007 dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA; 1008 dev->vlan_features = dev->features; 1009 1010 dev->hw_features |= NETIF_F_RXALL; 1011 dev->hw_features |= NETIF_F_RXFCS; 1012 1013 /* tp zeroed and aligned in alloc_etherdev */ 1014 tp = netdev_priv(dev); 1015 1016 /* note: tp->chipset set in rtl8139_init_board */ 1017 tp->drv_flags = board_info[ent->driver_data].hw_flags; 1018 tp->mmio_addr = ioaddr; 1019 tp->msg_enable = 1020 (debug < 0 ? RTL8139_DEF_MSG_ENABLE : ((1 << debug) - 1)); 1021 spin_lock_init (&tp->lock); 1022 spin_lock_init (&tp->rx_lock); 1023 INIT_DELAYED_WORK(&tp->thread, rtl8139_thread); 1024 tp->mii.dev = dev; 1025 tp->mii.mdio_read = mdio_read; 1026 tp->mii.mdio_write = mdio_write; 1027 tp->mii.phy_id_mask = 0x3f; 1028 tp->mii.reg_num_mask = 0x1f; 1029 1030 /* dev is fully set up and ready to use now */ 1031 pr_debug("about to register device named %s (%p)...\n", 1032 dev->name, dev); 1033 i = register_netdev (dev); 1034 if (i) goto err_out; 1035 1036 pci_set_drvdata (pdev, dev); 1037 1038 netdev_info(dev, "%s at 0x%p, %pM, IRQ %d\n", 1039 board_info[ent->driver_data].name, 1040 ioaddr, dev->dev_addr, pdev->irq); 1041 1042 netdev_dbg(dev, "Identified 8139 chip type '%s'\n", 1043 rtl_chip_info[tp->chipset].name); 1044 1045 /* Find the connected MII xcvrs. 1046 Doing this in open() would allow detecting external xcvrs later, but 1047 takes too much time. */ 1048 #ifdef CONFIG_8139TOO_8129 1049 if (tp->drv_flags & HAS_MII_XCVR) { 1050 int phy, phy_idx = 0; 1051 for (phy = 0; phy < 32 && phy_idx < sizeof(tp->phys); phy++) { 1052 int mii_status = mdio_read(dev, phy, 1); 1053 if (mii_status != 0xffff && mii_status != 0x0000) { 1054 u16 advertising = mdio_read(dev, phy, 4); 1055 tp->phys[phy_idx++] = phy; 1056 netdev_info(dev, "MII transceiver %d status 0x%04x advertising %04x\n", 1057 phy, mii_status, advertising); 1058 } 1059 } 1060 if (phy_idx == 0) { 1061 netdev_info(dev, "No MII transceivers found! Assuming SYM transceiver\n"); 1062 tp->phys[0] = 32; 1063 } 1064 } else 1065 #endif 1066 tp->phys[0] = 32; 1067 tp->mii.phy_id = tp->phys[0]; 1068 1069 /* The lower four bits are the media type. */ 1070 option = (board_idx >= MAX_UNITS) ? 0 : media[board_idx]; 1071 if (option > 0) { 1072 tp->mii.full_duplex = (option & 0x210) ? 1 : 0; 1073 tp->default_port = option & 0xFF; 1074 if (tp->default_port) 1075 tp->mii.force_media = 1; 1076 } 1077 if (board_idx < MAX_UNITS && full_duplex[board_idx] > 0) 1078 tp->mii.full_duplex = full_duplex[board_idx]; 1079 if (tp->mii.full_duplex) { 1080 netdev_info(dev, "Media type forced to Full Duplex\n"); 1081 /* Changing the MII-advertised media because might prevent 1082 re-connection. */ 1083 tp->mii.force_media = 1; 1084 } 1085 if (tp->default_port) { 1086 netdev_info(dev, " Forcing %dMbps %s-duplex operation\n", 1087 (option & 0x20 ? 100 : 10), 1088 (option & 0x10 ? "full" : "half")); 1089 mdio_write(dev, tp->phys[0], 0, 1090 ((option & 0x20) ? 0x2000 : 0) | /* 100Mbps? */ 1091 ((option & 0x10) ? 0x0100 : 0)); /* Full duplex? */ 1092 } 1093 1094 /* Put the chip into low-power mode. */ 1095 if (rtl_chip_info[tp->chipset].flags & HasHltClk) 1096 RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */ 1097 1098 return 0; 1099 1100 err_out: 1101 __rtl8139_cleanup_dev (dev); 1102 pci_disable_device (pdev); 1103 return i; 1104 } 1105 1106 1107 static void rtl8139_remove_one(struct pci_dev *pdev) 1108 { 1109 struct net_device *dev = pci_get_drvdata (pdev); 1110 struct rtl8139_private *tp = netdev_priv(dev); 1111 1112 assert (dev != NULL); 1113 1114 cancel_delayed_work_sync(&tp->thread); 1115 1116 unregister_netdev (dev); 1117 1118 __rtl8139_cleanup_dev (dev); 1119 pci_disable_device (pdev); 1120 } 1121 1122 1123 /* Serial EEPROM section. */ 1124 1125 /* EEPROM_Ctrl bits. */ 1126 #define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */ 1127 #define EE_CS 0x08 /* EEPROM chip select. */ 1128 #define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */ 1129 #define EE_WRITE_0 0x00 1130 #define EE_WRITE_1 0x02 1131 #define EE_DATA_READ 0x01 /* EEPROM chip data out. */ 1132 #define EE_ENB (0x80 | EE_CS) 1133 1134 /* Delay between EEPROM clock transitions. 1135 No extra delay is needed with 33Mhz PCI, but 66Mhz may change this. 1136 */ 1137 1138 #define eeprom_delay() (void)RTL_R8(Cfg9346) 1139 1140 /* The EEPROM commands include the alway-set leading bit. */ 1141 #define EE_WRITE_CMD (5) 1142 #define EE_READ_CMD (6) 1143 #define EE_ERASE_CMD (7) 1144 1145 static int read_eeprom(void __iomem *ioaddr, int location, int addr_len) 1146 { 1147 int i; 1148 unsigned retval = 0; 1149 int read_cmd = location | (EE_READ_CMD << addr_len); 1150 1151 RTL_W8 (Cfg9346, EE_ENB & ~EE_CS); 1152 RTL_W8 (Cfg9346, EE_ENB); 1153 eeprom_delay (); 1154 1155 /* Shift the read command bits out. */ 1156 for (i = 4 + addr_len; i >= 0; i--) { 1157 int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0; 1158 RTL_W8 (Cfg9346, EE_ENB | dataval); 1159 eeprom_delay (); 1160 RTL_W8 (Cfg9346, EE_ENB | dataval | EE_SHIFT_CLK); 1161 eeprom_delay (); 1162 } 1163 RTL_W8 (Cfg9346, EE_ENB); 1164 eeprom_delay (); 1165 1166 for (i = 16; i > 0; i--) { 1167 RTL_W8 (Cfg9346, EE_ENB | EE_SHIFT_CLK); 1168 eeprom_delay (); 1169 retval = 1170 (retval << 1) | ((RTL_R8 (Cfg9346) & EE_DATA_READ) ? 1 : 1171 0); 1172 RTL_W8 (Cfg9346, EE_ENB); 1173 eeprom_delay (); 1174 } 1175 1176 /* Terminate the EEPROM access. */ 1177 RTL_W8(Cfg9346, 0); 1178 eeprom_delay (); 1179 1180 return retval; 1181 } 1182 1183 /* MII serial management: mostly bogus for now. */ 1184 /* Read and write the MII management registers using software-generated 1185 serial MDIO protocol. 1186 The maximum data clock rate is 2.5 Mhz. The minimum timing is usually 1187 met by back-to-back PCI I/O cycles, but we insert a delay to avoid 1188 "overclocking" issues. */ 1189 #define MDIO_DIR 0x80 1190 #define MDIO_DATA_OUT 0x04 1191 #define MDIO_DATA_IN 0x02 1192 #define MDIO_CLK 0x01 1193 #define MDIO_WRITE0 (MDIO_DIR) 1194 #define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT) 1195 1196 #define mdio_delay() RTL_R8(Config4) 1197 1198 1199 static const char mii_2_8139_map[8] = { 1200 BasicModeCtrl, 1201 BasicModeStatus, 1202 0, 1203 0, 1204 NWayAdvert, 1205 NWayLPAR, 1206 NWayExpansion, 1207 0 1208 }; 1209 1210 1211 #ifdef CONFIG_8139TOO_8129 1212 /* Syncronize the MII management interface by shifting 32 one bits out. */ 1213 static void mdio_sync (void __iomem *ioaddr) 1214 { 1215 int i; 1216 1217 for (i = 32; i >= 0; i--) { 1218 RTL_W8 (Config4, MDIO_WRITE1); 1219 mdio_delay (); 1220 RTL_W8 (Config4, MDIO_WRITE1 | MDIO_CLK); 1221 mdio_delay (); 1222 } 1223 } 1224 #endif 1225 1226 static int mdio_read (struct net_device *dev, int phy_id, int location) 1227 { 1228 struct rtl8139_private *tp = netdev_priv(dev); 1229 int retval = 0; 1230 #ifdef CONFIG_8139TOO_8129 1231 void __iomem *ioaddr = tp->mmio_addr; 1232 int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location; 1233 int i; 1234 #endif 1235 1236 if (phy_id > 31) { /* Really a 8139. Use internal registers. */ 1237 void __iomem *ioaddr = tp->mmio_addr; 1238 return location < 8 && mii_2_8139_map[location] ? 1239 RTL_R16 (mii_2_8139_map[location]) : 0; 1240 } 1241 1242 #ifdef CONFIG_8139TOO_8129 1243 mdio_sync (ioaddr); 1244 /* Shift the read command bits out. */ 1245 for (i = 15; i >= 0; i--) { 1246 int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0; 1247 1248 RTL_W8 (Config4, MDIO_DIR | dataval); 1249 mdio_delay (); 1250 RTL_W8 (Config4, MDIO_DIR | dataval | MDIO_CLK); 1251 mdio_delay (); 1252 } 1253 1254 /* Read the two transition, 16 data, and wire-idle bits. */ 1255 for (i = 19; i > 0; i--) { 1256 RTL_W8 (Config4, 0); 1257 mdio_delay (); 1258 retval = (retval << 1) | ((RTL_R8 (Config4) & MDIO_DATA_IN) ? 1 : 0); 1259 RTL_W8 (Config4, MDIO_CLK); 1260 mdio_delay (); 1261 } 1262 #endif 1263 1264 return (retval >> 1) & 0xffff; 1265 } 1266 1267 1268 static void mdio_write (struct net_device *dev, int phy_id, int location, 1269 int value) 1270 { 1271 struct rtl8139_private *tp = netdev_priv(dev); 1272 #ifdef CONFIG_8139TOO_8129 1273 void __iomem *ioaddr = tp->mmio_addr; 1274 int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) | value; 1275 int i; 1276 #endif 1277 1278 if (phy_id > 31) { /* Really a 8139. Use internal registers. */ 1279 void __iomem *ioaddr = tp->mmio_addr; 1280 if (location == 0) { 1281 RTL_W8 (Cfg9346, Cfg9346_Unlock); 1282 RTL_W16 (BasicModeCtrl, value); 1283 RTL_W8 (Cfg9346, Cfg9346_Lock); 1284 } else if (location < 8 && mii_2_8139_map[location]) 1285 RTL_W16 (mii_2_8139_map[location], value); 1286 return; 1287 } 1288 1289 #ifdef CONFIG_8139TOO_8129 1290 mdio_sync (ioaddr); 1291 1292 /* Shift the command bits out. */ 1293 for (i = 31; i >= 0; i--) { 1294 int dataval = 1295 (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; 1296 RTL_W8 (Config4, dataval); 1297 mdio_delay (); 1298 RTL_W8 (Config4, dataval | MDIO_CLK); 1299 mdio_delay (); 1300 } 1301 /* Clear out extra bits. */ 1302 for (i = 2; i > 0; i--) { 1303 RTL_W8 (Config4, 0); 1304 mdio_delay (); 1305 RTL_W8 (Config4, MDIO_CLK); 1306 mdio_delay (); 1307 } 1308 #endif 1309 } 1310 1311 1312 static int rtl8139_open (struct net_device *dev) 1313 { 1314 struct rtl8139_private *tp = netdev_priv(dev); 1315 void __iomem *ioaddr = tp->mmio_addr; 1316 const int irq = tp->pci_dev->irq; 1317 int retval; 1318 1319 retval = request_irq(irq, rtl8139_interrupt, IRQF_SHARED, dev->name, dev); 1320 if (retval) 1321 return retval; 1322 1323 tp->tx_bufs = dma_alloc_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN, 1324 &tp->tx_bufs_dma, GFP_KERNEL); 1325 tp->rx_ring = dma_alloc_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN, 1326 &tp->rx_ring_dma, GFP_KERNEL); 1327 if (tp->tx_bufs == NULL || tp->rx_ring == NULL) { 1328 free_irq(irq, dev); 1329 1330 if (tp->tx_bufs) 1331 dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN, 1332 tp->tx_bufs, tp->tx_bufs_dma); 1333 if (tp->rx_ring) 1334 dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN, 1335 tp->rx_ring, tp->rx_ring_dma); 1336 1337 return -ENOMEM; 1338 1339 } 1340 1341 napi_enable(&tp->napi); 1342 1343 tp->mii.full_duplex = tp->mii.force_media; 1344 tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000; 1345 1346 rtl8139_init_ring (dev); 1347 rtl8139_hw_start (dev); 1348 netif_start_queue (dev); 1349 1350 netif_dbg(tp, ifup, dev, 1351 "%s() ioaddr %#llx IRQ %d GP Pins %02x %s-duplex\n", 1352 __func__, 1353 (unsigned long long)pci_resource_start (tp->pci_dev, 1), 1354 irq, RTL_R8 (MediaStatus), 1355 tp->mii.full_duplex ? "full" : "half"); 1356 1357 rtl8139_start_thread(tp); 1358 1359 return 0; 1360 } 1361 1362 1363 static void rtl_check_media (struct net_device *dev, unsigned int init_media) 1364 { 1365 struct rtl8139_private *tp = netdev_priv(dev); 1366 1367 if (tp->phys[0] >= 0) { 1368 mii_check_media(&tp->mii, netif_msg_link(tp), init_media); 1369 } 1370 } 1371 1372 /* Start the hardware at open or resume. */ 1373 static void rtl8139_hw_start (struct net_device *dev) 1374 { 1375 struct rtl8139_private *tp = netdev_priv(dev); 1376 void __iomem *ioaddr = tp->mmio_addr; 1377 u32 i; 1378 u8 tmp; 1379 1380 /* Bring old chips out of low-power mode. */ 1381 if (rtl_chip_info[tp->chipset].flags & HasHltClk) 1382 RTL_W8 (HltClk, 'R'); 1383 1384 rtl8139_chip_reset (ioaddr); 1385 1386 /* unlock Config[01234] and BMCR register writes */ 1387 RTL_W8_F (Cfg9346, Cfg9346_Unlock); 1388 /* Restore our idea of the MAC address. */ 1389 RTL_W32_F (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0))); 1390 RTL_W32_F (MAC0 + 4, le16_to_cpu (*(__le16 *) (dev->dev_addr + 4))); 1391 1392 tp->cur_rx = 0; 1393 1394 /* init Rx ring buffer DMA address */ 1395 RTL_W32_F (RxBuf, tp->rx_ring_dma); 1396 1397 /* Must enable Tx/Rx before setting transfer thresholds! */ 1398 RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb); 1399 1400 tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys; 1401 RTL_W32 (RxConfig, tp->rx_config); 1402 RTL_W32 (TxConfig, rtl8139_tx_config); 1403 1404 rtl_check_media (dev, 1); 1405 1406 if (tp->chipset >= CH_8139B) { 1407 /* Disable magic packet scanning, which is enabled 1408 * when PM is enabled in Config1. It can be reenabled 1409 * via ETHTOOL_SWOL if desired. */ 1410 RTL_W8 (Config3, RTL_R8 (Config3) & ~Cfg3_Magic); 1411 } 1412 1413 netdev_dbg(dev, "init buffer addresses\n"); 1414 1415 /* Lock Config[01234] and BMCR register writes */ 1416 RTL_W8 (Cfg9346, Cfg9346_Lock); 1417 1418 /* init Tx buffer DMA addresses */ 1419 for (i = 0; i < NUM_TX_DESC; i++) 1420 RTL_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs)); 1421 1422 RTL_W32 (RxMissed, 0); 1423 1424 rtl8139_set_rx_mode (dev); 1425 1426 /* no early-rx interrupts */ 1427 RTL_W16 (MultiIntr, RTL_R16 (MultiIntr) & MultiIntrClear); 1428 1429 /* make sure RxTx has started */ 1430 tmp = RTL_R8 (ChipCmd); 1431 if ((!(tmp & CmdRxEnb)) || (!(tmp & CmdTxEnb))) 1432 RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb); 1433 1434 /* Enable all known interrupts by setting the interrupt mask. */ 1435 RTL_W16 (IntrMask, rtl8139_intr_mask); 1436 } 1437 1438 1439 /* Initialize the Rx and Tx rings, along with various 'dev' bits. */ 1440 static void rtl8139_init_ring (struct net_device *dev) 1441 { 1442 struct rtl8139_private *tp = netdev_priv(dev); 1443 int i; 1444 1445 tp->cur_rx = 0; 1446 tp->cur_tx = 0; 1447 tp->dirty_tx = 0; 1448 1449 for (i = 0; i < NUM_TX_DESC; i++) 1450 tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE]; 1451 } 1452 1453 1454 /* This must be global for CONFIG_8139TOO_TUNE_TWISTER case */ 1455 static int next_tick = 3 * HZ; 1456 1457 #ifndef CONFIG_8139TOO_TUNE_TWISTER 1458 static inline void rtl8139_tune_twister (struct net_device *dev, 1459 struct rtl8139_private *tp) {} 1460 #else 1461 enum TwisterParamVals { 1462 PARA78_default = 0x78fa8388, 1463 PARA7c_default = 0xcb38de43, /* param[0][3] */ 1464 PARA7c_xxx = 0xcb38de43, 1465 }; 1466 1467 static const unsigned long param[4][4] = { 1468 {0xcb39de43, 0xcb39ce43, 0xfb38de03, 0xcb38de43}, 1469 {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83}, 1470 {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83}, 1471 {0xbb39de43, 0xbb39ce43, 0xbb39ce83, 0xbb39ce83} 1472 }; 1473 1474 static void rtl8139_tune_twister (struct net_device *dev, 1475 struct rtl8139_private *tp) 1476 { 1477 int linkcase; 1478 void __iomem *ioaddr = tp->mmio_addr; 1479 1480 /* This is a complicated state machine to configure the "twister" for 1481 impedance/echos based on the cable length. 1482 All of this is magic and undocumented. 1483 */ 1484 switch (tp->twistie) { 1485 case 1: 1486 if (RTL_R16 (CSCR) & CSCR_LinkOKBit) { 1487 /* We have link beat, let us tune the twister. */ 1488 RTL_W16 (CSCR, CSCR_LinkDownOffCmd); 1489 tp->twistie = 2; /* Change to state 2. */ 1490 next_tick = HZ / 10; 1491 } else { 1492 /* Just put in some reasonable defaults for when beat returns. */ 1493 RTL_W16 (CSCR, CSCR_LinkDownCmd); 1494 RTL_W32 (FIFOTMS, 0x20); /* Turn on cable test mode. */ 1495 RTL_W32 (PARA78, PARA78_default); 1496 RTL_W32 (PARA7c, PARA7c_default); 1497 tp->twistie = 0; /* Bail from future actions. */ 1498 } 1499 break; 1500 case 2: 1501 /* Read how long it took to hear the echo. */ 1502 linkcase = RTL_R16 (CSCR) & CSCR_LinkStatusBits; 1503 if (linkcase == 0x7000) 1504 tp->twist_row = 3; 1505 else if (linkcase == 0x3000) 1506 tp->twist_row = 2; 1507 else if (linkcase == 0x1000) 1508 tp->twist_row = 1; 1509 else 1510 tp->twist_row = 0; 1511 tp->twist_col = 0; 1512 tp->twistie = 3; /* Change to state 2. */ 1513 next_tick = HZ / 10; 1514 break; 1515 case 3: 1516 /* Put out four tuning parameters, one per 100msec. */ 1517 if (tp->twist_col == 0) 1518 RTL_W16 (FIFOTMS, 0); 1519 RTL_W32 (PARA7c, param[(int) tp->twist_row] 1520 [(int) tp->twist_col]); 1521 next_tick = HZ / 10; 1522 if (++tp->twist_col >= 4) { 1523 /* For short cables we are done. 1524 For long cables (row == 3) check for mistune. */ 1525 tp->twistie = 1526 (tp->twist_row == 3) ? 4 : 0; 1527 } 1528 break; 1529 case 4: 1530 /* Special case for long cables: check for mistune. */ 1531 if ((RTL_R16 (CSCR) & 1532 CSCR_LinkStatusBits) == 0x7000) { 1533 tp->twistie = 0; 1534 break; 1535 } else { 1536 RTL_W32 (PARA7c, 0xfb38de03); 1537 tp->twistie = 5; 1538 next_tick = HZ / 10; 1539 } 1540 break; 1541 case 5: 1542 /* Retune for shorter cable (column 2). */ 1543 RTL_W32 (FIFOTMS, 0x20); 1544 RTL_W32 (PARA78, PARA78_default); 1545 RTL_W32 (PARA7c, PARA7c_default); 1546 RTL_W32 (FIFOTMS, 0x00); 1547 tp->twist_row = 2; 1548 tp->twist_col = 0; 1549 tp->twistie = 3; 1550 next_tick = HZ / 10; 1551 break; 1552 1553 default: 1554 /* do nothing */ 1555 break; 1556 } 1557 } 1558 #endif /* CONFIG_8139TOO_TUNE_TWISTER */ 1559 1560 static inline void rtl8139_thread_iter (struct net_device *dev, 1561 struct rtl8139_private *tp, 1562 void __iomem *ioaddr) 1563 { 1564 int mii_lpa; 1565 1566 mii_lpa = mdio_read (dev, tp->phys[0], MII_LPA); 1567 1568 if (!tp->mii.force_media && mii_lpa != 0xffff) { 1569 int duplex = ((mii_lpa & LPA_100FULL) || 1570 (mii_lpa & 0x01C0) == 0x0040); 1571 if (tp->mii.full_duplex != duplex) { 1572 tp->mii.full_duplex = duplex; 1573 1574 if (mii_lpa) { 1575 netdev_info(dev, "Setting %s-duplex based on MII #%d link partner ability of %04x\n", 1576 tp->mii.full_duplex ? "full" : "half", 1577 tp->phys[0], mii_lpa); 1578 } else { 1579 netdev_info(dev, "media is unconnected, link down, or incompatible connection\n"); 1580 } 1581 #if 0 1582 RTL_W8 (Cfg9346, Cfg9346_Unlock); 1583 RTL_W8 (Config1, tp->mii.full_duplex ? 0x60 : 0x20); 1584 RTL_W8 (Cfg9346, Cfg9346_Lock); 1585 #endif 1586 } 1587 } 1588 1589 next_tick = HZ * 60; 1590 1591 rtl8139_tune_twister (dev, tp); 1592 1593 netdev_dbg(dev, "Media selection tick, Link partner %04x\n", 1594 RTL_R16(NWayLPAR)); 1595 netdev_dbg(dev, "Other registers are IntMask %04x IntStatus %04x\n", 1596 RTL_R16(IntrMask), RTL_R16(IntrStatus)); 1597 netdev_dbg(dev, "Chip config %02x %02x\n", 1598 RTL_R8(Config0), RTL_R8(Config1)); 1599 } 1600 1601 static void rtl8139_thread (struct work_struct *work) 1602 { 1603 struct rtl8139_private *tp = 1604 container_of(work, struct rtl8139_private, thread.work); 1605 struct net_device *dev = tp->mii.dev; 1606 unsigned long thr_delay = next_tick; 1607 1608 rtnl_lock(); 1609 1610 if (!netif_running(dev)) 1611 goto out_unlock; 1612 1613 if (tp->watchdog_fired) { 1614 tp->watchdog_fired = 0; 1615 rtl8139_tx_timeout_task(work); 1616 } else 1617 rtl8139_thread_iter(dev, tp, tp->mmio_addr); 1618 1619 if (tp->have_thread) 1620 schedule_delayed_work(&tp->thread, thr_delay); 1621 out_unlock: 1622 rtnl_unlock (); 1623 } 1624 1625 static void rtl8139_start_thread(struct rtl8139_private *tp) 1626 { 1627 tp->twistie = 0; 1628 if (tp->chipset == CH_8139_K) 1629 tp->twistie = 1; 1630 else if (tp->drv_flags & HAS_LNK_CHNG) 1631 return; 1632 1633 tp->have_thread = 1; 1634 tp->watchdog_fired = 0; 1635 1636 schedule_delayed_work(&tp->thread, next_tick); 1637 } 1638 1639 static inline void rtl8139_tx_clear (struct rtl8139_private *tp) 1640 { 1641 tp->cur_tx = 0; 1642 tp->dirty_tx = 0; 1643 1644 /* XXX account for unsent Tx packets in tp->stats.tx_dropped */ 1645 } 1646 1647 static void rtl8139_tx_timeout_task (struct work_struct *work) 1648 { 1649 struct rtl8139_private *tp = 1650 container_of(work, struct rtl8139_private, thread.work); 1651 struct net_device *dev = tp->mii.dev; 1652 void __iomem *ioaddr = tp->mmio_addr; 1653 int i; 1654 u8 tmp8; 1655 1656 netdev_dbg(dev, "Transmit timeout, status %02x %04x %04x media %02x\n", 1657 RTL_R8(ChipCmd), RTL_R16(IntrStatus), 1658 RTL_R16(IntrMask), RTL_R8(MediaStatus)); 1659 /* Emit info to figure out what went wrong. */ 1660 netdev_dbg(dev, "Tx queue start entry %ld dirty entry %ld\n", 1661 tp->cur_tx, tp->dirty_tx); 1662 for (i = 0; i < NUM_TX_DESC; i++) 1663 netdev_dbg(dev, "Tx descriptor %d is %08x%s\n", 1664 i, RTL_R32(TxStatus0 + (i * 4)), 1665 i == tp->dirty_tx % NUM_TX_DESC ? 1666 " (queue head)" : ""); 1667 1668 tp->xstats.tx_timeouts++; 1669 1670 /* disable Tx ASAP, if not already */ 1671 tmp8 = RTL_R8 (ChipCmd); 1672 if (tmp8 & CmdTxEnb) 1673 RTL_W8 (ChipCmd, CmdRxEnb); 1674 1675 spin_lock_bh(&tp->rx_lock); 1676 /* Disable interrupts by clearing the interrupt mask. */ 1677 RTL_W16 (IntrMask, 0x0000); 1678 1679 /* Stop a shared interrupt from scavenging while we are. */ 1680 spin_lock_irq(&tp->lock); 1681 rtl8139_tx_clear (tp); 1682 spin_unlock_irq(&tp->lock); 1683 1684 /* ...and finally, reset everything */ 1685 if (netif_running(dev)) { 1686 rtl8139_hw_start (dev); 1687 netif_wake_queue (dev); 1688 } 1689 spin_unlock_bh(&tp->rx_lock); 1690 } 1691 1692 static void rtl8139_tx_timeout (struct net_device *dev) 1693 { 1694 struct rtl8139_private *tp = netdev_priv(dev); 1695 1696 tp->watchdog_fired = 1; 1697 if (!tp->have_thread) { 1698 INIT_DELAYED_WORK(&tp->thread, rtl8139_thread); 1699 schedule_delayed_work(&tp->thread, next_tick); 1700 } 1701 } 1702 1703 static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb, 1704 struct net_device *dev) 1705 { 1706 struct rtl8139_private *tp = netdev_priv(dev); 1707 void __iomem *ioaddr = tp->mmio_addr; 1708 unsigned int entry; 1709 unsigned int len = skb->len; 1710 unsigned long flags; 1711 1712 /* Calculate the next Tx descriptor entry. */ 1713 entry = tp->cur_tx % NUM_TX_DESC; 1714 1715 /* Note: the chip doesn't have auto-pad! */ 1716 if (likely(len < TX_BUF_SIZE)) { 1717 if (len < ETH_ZLEN) 1718 memset(tp->tx_buf[entry], 0, ETH_ZLEN); 1719 skb_copy_and_csum_dev(skb, tp->tx_buf[entry]); 1720 dev_kfree_skb_any(skb); 1721 } else { 1722 dev_kfree_skb_any(skb); 1723 dev->stats.tx_dropped++; 1724 return NETDEV_TX_OK; 1725 } 1726 1727 spin_lock_irqsave(&tp->lock, flags); 1728 /* 1729 * Writing to TxStatus triggers a DMA transfer of the data 1730 * copied to tp->tx_buf[entry] above. Use a memory barrier 1731 * to make sure that the device sees the updated data. 1732 */ 1733 wmb(); 1734 RTL_W32_F (TxStatus0 + (entry * sizeof (u32)), 1735 tp->tx_flag | max(len, (unsigned int)ETH_ZLEN)); 1736 1737 tp->cur_tx++; 1738 1739 if ((tp->cur_tx - NUM_TX_DESC) == tp->dirty_tx) 1740 netif_stop_queue (dev); 1741 spin_unlock_irqrestore(&tp->lock, flags); 1742 1743 netif_dbg(tp, tx_queued, dev, "Queued Tx packet size %u to slot %d\n", 1744 len, entry); 1745 1746 return NETDEV_TX_OK; 1747 } 1748 1749 1750 static void rtl8139_tx_interrupt (struct net_device *dev, 1751 struct rtl8139_private *tp, 1752 void __iomem *ioaddr) 1753 { 1754 unsigned long dirty_tx, tx_left; 1755 1756 assert (dev != NULL); 1757 assert (ioaddr != NULL); 1758 1759 dirty_tx = tp->dirty_tx; 1760 tx_left = tp->cur_tx - dirty_tx; 1761 while (tx_left > 0) { 1762 int entry = dirty_tx % NUM_TX_DESC; 1763 int txstatus; 1764 1765 txstatus = RTL_R32 (TxStatus0 + (entry * sizeof (u32))); 1766 1767 if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted))) 1768 break; /* It still hasn't been Txed */ 1769 1770 /* Note: TxCarrierLost is always asserted at 100mbps. */ 1771 if (txstatus & (TxOutOfWindow | TxAborted)) { 1772 /* There was an major error, log it. */ 1773 netif_dbg(tp, tx_err, dev, "Transmit error, Tx status %08x\n", 1774 txstatus); 1775 dev->stats.tx_errors++; 1776 if (txstatus & TxAborted) { 1777 dev->stats.tx_aborted_errors++; 1778 RTL_W32 (TxConfig, TxClearAbt); 1779 RTL_W16 (IntrStatus, TxErr); 1780 wmb(); 1781 } 1782 if (txstatus & TxCarrierLost) 1783 dev->stats.tx_carrier_errors++; 1784 if (txstatus & TxOutOfWindow) 1785 dev->stats.tx_window_errors++; 1786 } else { 1787 if (txstatus & TxUnderrun) { 1788 /* Add 64 to the Tx FIFO threshold. */ 1789 if (tp->tx_flag < 0x00300000) 1790 tp->tx_flag += 0x00020000; 1791 dev->stats.tx_fifo_errors++; 1792 } 1793 dev->stats.collisions += (txstatus >> 24) & 15; 1794 u64_stats_update_begin(&tp->tx_stats.syncp); 1795 tp->tx_stats.packets++; 1796 tp->tx_stats.bytes += txstatus & 0x7ff; 1797 u64_stats_update_end(&tp->tx_stats.syncp); 1798 } 1799 1800 dirty_tx++; 1801 tx_left--; 1802 } 1803 1804 #ifndef RTL8139_NDEBUG 1805 if (tp->cur_tx - dirty_tx > NUM_TX_DESC) { 1806 netdev_err(dev, "Out-of-sync dirty pointer, %ld vs. %ld\n", 1807 dirty_tx, tp->cur_tx); 1808 dirty_tx += NUM_TX_DESC; 1809 } 1810 #endif /* RTL8139_NDEBUG */ 1811 1812 /* only wake the queue if we did work, and the queue is stopped */ 1813 if (tp->dirty_tx != dirty_tx) { 1814 tp->dirty_tx = dirty_tx; 1815 mb(); 1816 netif_wake_queue (dev); 1817 } 1818 } 1819 1820 1821 /* TODO: clean this up! Rx reset need not be this intensive */ 1822 static void rtl8139_rx_err (u32 rx_status, struct net_device *dev, 1823 struct rtl8139_private *tp, void __iomem *ioaddr) 1824 { 1825 u8 tmp8; 1826 #ifdef CONFIG_8139_OLD_RX_RESET 1827 int tmp_work; 1828 #endif 1829 1830 netif_dbg(tp, rx_err, dev, "Ethernet frame had errors, status %08x\n", 1831 rx_status); 1832 dev->stats.rx_errors++; 1833 if (!(rx_status & RxStatusOK)) { 1834 if (rx_status & RxTooLong) { 1835 netdev_dbg(dev, "Oversized Ethernet frame, status %04x!\n", 1836 rx_status); 1837 /* A.C.: The chip hangs here. */ 1838 } 1839 if (rx_status & (RxBadSymbol | RxBadAlign)) 1840 dev->stats.rx_frame_errors++; 1841 if (rx_status & (RxRunt | RxTooLong)) 1842 dev->stats.rx_length_errors++; 1843 if (rx_status & RxCRCErr) 1844 dev->stats.rx_crc_errors++; 1845 } else { 1846 tp->xstats.rx_lost_in_ring++; 1847 } 1848 1849 #ifndef CONFIG_8139_OLD_RX_RESET 1850 tmp8 = RTL_R8 (ChipCmd); 1851 RTL_W8 (ChipCmd, tmp8 & ~CmdRxEnb); 1852 RTL_W8 (ChipCmd, tmp8); 1853 RTL_W32 (RxConfig, tp->rx_config); 1854 tp->cur_rx = 0; 1855 #else 1856 /* Reset the receiver, based on RealTek recommendation. (Bug?) */ 1857 1858 /* disable receive */ 1859 RTL_W8_F (ChipCmd, CmdTxEnb); 1860 tmp_work = 200; 1861 while (--tmp_work > 0) { 1862 udelay(1); 1863 tmp8 = RTL_R8 (ChipCmd); 1864 if (!(tmp8 & CmdRxEnb)) 1865 break; 1866 } 1867 if (tmp_work <= 0) 1868 netdev_warn(dev, "rx stop wait too long\n"); 1869 /* restart receive */ 1870 tmp_work = 200; 1871 while (--tmp_work > 0) { 1872 RTL_W8_F (ChipCmd, CmdRxEnb | CmdTxEnb); 1873 udelay(1); 1874 tmp8 = RTL_R8 (ChipCmd); 1875 if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb)) 1876 break; 1877 } 1878 if (tmp_work <= 0) 1879 netdev_warn(dev, "tx/rx enable wait too long\n"); 1880 1881 /* and reinitialize all rx related registers */ 1882 RTL_W8_F (Cfg9346, Cfg9346_Unlock); 1883 /* Must enable Tx/Rx before setting transfer thresholds! */ 1884 RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb); 1885 1886 tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys; 1887 RTL_W32 (RxConfig, tp->rx_config); 1888 tp->cur_rx = 0; 1889 1890 netdev_dbg(dev, "init buffer addresses\n"); 1891 1892 /* Lock Config[01234] and BMCR register writes */ 1893 RTL_W8 (Cfg9346, Cfg9346_Lock); 1894 1895 /* init Rx ring buffer DMA address */ 1896 RTL_W32_F (RxBuf, tp->rx_ring_dma); 1897 1898 /* A.C.: Reset the multicast list. */ 1899 __set_rx_mode (dev); 1900 #endif 1901 } 1902 1903 #if RX_BUF_IDX == 3 1904 static inline void wrap_copy(struct sk_buff *skb, const unsigned char *ring, 1905 u32 offset, unsigned int size) 1906 { 1907 u32 left = RX_BUF_LEN - offset; 1908 1909 if (size > left) { 1910 skb_copy_to_linear_data(skb, ring + offset, left); 1911 skb_copy_to_linear_data_offset(skb, left, ring, size - left); 1912 } else 1913 skb_copy_to_linear_data(skb, ring + offset, size); 1914 } 1915 #endif 1916 1917 static void rtl8139_isr_ack(struct rtl8139_private *tp) 1918 { 1919 void __iomem *ioaddr = tp->mmio_addr; 1920 u16 status; 1921 1922 status = RTL_R16 (IntrStatus) & RxAckBits; 1923 1924 /* Clear out errors and receive interrupts */ 1925 if (likely(status != 0)) { 1926 if (unlikely(status & (RxFIFOOver | RxOverflow))) { 1927 tp->dev->stats.rx_errors++; 1928 if (status & RxFIFOOver) 1929 tp->dev->stats.rx_fifo_errors++; 1930 } 1931 RTL_W16_F (IntrStatus, RxAckBits); 1932 } 1933 } 1934 1935 static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp, 1936 int budget) 1937 { 1938 void __iomem *ioaddr = tp->mmio_addr; 1939 int received = 0; 1940 unsigned char *rx_ring = tp->rx_ring; 1941 unsigned int cur_rx = tp->cur_rx; 1942 unsigned int rx_size = 0; 1943 1944 netdev_dbg(dev, "In %s(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n", 1945 __func__, (u16)cur_rx, 1946 RTL_R16(RxBufAddr), RTL_R16(RxBufPtr), RTL_R8(ChipCmd)); 1947 1948 while (netif_running(dev) && received < budget && 1949 (RTL_R8 (ChipCmd) & RxBufEmpty) == 0) { 1950 u32 ring_offset = cur_rx % RX_BUF_LEN; 1951 u32 rx_status; 1952 unsigned int pkt_size; 1953 struct sk_buff *skb; 1954 1955 rmb(); 1956 1957 /* read size+status of next frame from DMA ring buffer */ 1958 rx_status = le32_to_cpu (*(__le32 *) (rx_ring + ring_offset)); 1959 rx_size = rx_status >> 16; 1960 if (likely(!(dev->features & NETIF_F_RXFCS))) 1961 pkt_size = rx_size - 4; 1962 else 1963 pkt_size = rx_size; 1964 1965 netif_dbg(tp, rx_status, dev, "%s() status %04x, size %04x, cur %04x\n", 1966 __func__, rx_status, rx_size, cur_rx); 1967 #if RTL8139_DEBUG > 2 1968 print_hex_dump(KERN_DEBUG, "Frame contents: ", 1969 DUMP_PREFIX_OFFSET, 16, 1, 1970 &rx_ring[ring_offset], 70, true); 1971 #endif 1972 1973 /* Packet copy from FIFO still in progress. 1974 * Theoretically, this should never happen 1975 * since EarlyRx is disabled. 1976 */ 1977 if (unlikely(rx_size == 0xfff0)) { 1978 if (!tp->fifo_copy_timeout) 1979 tp->fifo_copy_timeout = jiffies + 2; 1980 else if (time_after(jiffies, tp->fifo_copy_timeout)) { 1981 netdev_dbg(dev, "hung FIFO. Reset\n"); 1982 rx_size = 0; 1983 goto no_early_rx; 1984 } 1985 netif_dbg(tp, intr, dev, "fifo copy in progress\n"); 1986 tp->xstats.early_rx++; 1987 break; 1988 } 1989 1990 no_early_rx: 1991 tp->fifo_copy_timeout = 0; 1992 1993 /* If Rx err or invalid rx_size/rx_status received 1994 * (which happens if we get lost in the ring), 1995 * Rx process gets reset, so we abort any further 1996 * Rx processing. 1997 */ 1998 if (unlikely((rx_size > (MAX_ETH_FRAME_SIZE+4)) || 1999 (rx_size < 8) || 2000 (!(rx_status & RxStatusOK)))) { 2001 if ((dev->features & NETIF_F_RXALL) && 2002 (rx_size <= (MAX_ETH_FRAME_SIZE + 4)) && 2003 (rx_size >= 8) && 2004 (!(rx_status & RxStatusOK))) { 2005 /* Length is at least mostly OK, but pkt has 2006 * error. I'm hoping we can handle some of these 2007 * errors without resetting the chip. --Ben 2008 */ 2009 dev->stats.rx_errors++; 2010 if (rx_status & RxCRCErr) { 2011 dev->stats.rx_crc_errors++; 2012 goto keep_pkt; 2013 } 2014 if (rx_status & RxRunt) { 2015 dev->stats.rx_length_errors++; 2016 goto keep_pkt; 2017 } 2018 } 2019 rtl8139_rx_err (rx_status, dev, tp, ioaddr); 2020 received = -1; 2021 goto out; 2022 } 2023 2024 keep_pkt: 2025 /* Malloc up new buffer, compatible with net-2e. */ 2026 /* Omit the four octet CRC from the length. */ 2027 2028 skb = netdev_alloc_skb_ip_align(dev, pkt_size); 2029 if (likely(skb)) { 2030 #if RX_BUF_IDX == 3 2031 wrap_copy(skb, rx_ring, ring_offset+4, pkt_size); 2032 #else 2033 skb_copy_to_linear_data (skb, &rx_ring[ring_offset + 4], pkt_size); 2034 #endif 2035 skb_put (skb, pkt_size); 2036 2037 skb->protocol = eth_type_trans (skb, dev); 2038 2039 u64_stats_update_begin(&tp->rx_stats.syncp); 2040 tp->rx_stats.packets++; 2041 tp->rx_stats.bytes += pkt_size; 2042 u64_stats_update_end(&tp->rx_stats.syncp); 2043 2044 netif_receive_skb (skb); 2045 } else { 2046 dev->stats.rx_dropped++; 2047 } 2048 received++; 2049 2050 cur_rx = (cur_rx + rx_size + 4 + 3) & ~3; 2051 RTL_W16 (RxBufPtr, (u16) (cur_rx - 16)); 2052 2053 rtl8139_isr_ack(tp); 2054 } 2055 2056 if (unlikely(!received || rx_size == 0xfff0)) 2057 rtl8139_isr_ack(tp); 2058 2059 netdev_dbg(dev, "Done %s(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n", 2060 __func__, cur_rx, 2061 RTL_R16(RxBufAddr), RTL_R16(RxBufPtr), RTL_R8(ChipCmd)); 2062 2063 tp->cur_rx = cur_rx; 2064 2065 /* 2066 * The receive buffer should be mostly empty. 2067 * Tell NAPI to reenable the Rx irq. 2068 */ 2069 if (tp->fifo_copy_timeout) 2070 received = budget; 2071 2072 out: 2073 return received; 2074 } 2075 2076 2077 static void rtl8139_weird_interrupt (struct net_device *dev, 2078 struct rtl8139_private *tp, 2079 void __iomem *ioaddr, 2080 int status, int link_changed) 2081 { 2082 netdev_dbg(dev, "Abnormal interrupt, status %08x\n", status); 2083 2084 assert (dev != NULL); 2085 assert (tp != NULL); 2086 assert (ioaddr != NULL); 2087 2088 /* Update the error count. */ 2089 dev->stats.rx_missed_errors += RTL_R32 (RxMissed); 2090 RTL_W32 (RxMissed, 0); 2091 2092 if ((status & RxUnderrun) && link_changed && 2093 (tp->drv_flags & HAS_LNK_CHNG)) { 2094 rtl_check_media(dev, 0); 2095 status &= ~RxUnderrun; 2096 } 2097 2098 if (status & (RxUnderrun | RxErr)) 2099 dev->stats.rx_errors++; 2100 2101 if (status & PCSTimeout) 2102 dev->stats.rx_length_errors++; 2103 if (status & RxUnderrun) 2104 dev->stats.rx_fifo_errors++; 2105 if (status & PCIErr) { 2106 u16 pci_cmd_status; 2107 pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status); 2108 pci_write_config_word (tp->pci_dev, PCI_STATUS, pci_cmd_status); 2109 2110 netdev_err(dev, "PCI Bus error %04x\n", pci_cmd_status); 2111 } 2112 } 2113 2114 static int rtl8139_poll(struct napi_struct *napi, int budget) 2115 { 2116 struct rtl8139_private *tp = container_of(napi, struct rtl8139_private, napi); 2117 struct net_device *dev = tp->dev; 2118 void __iomem *ioaddr = tp->mmio_addr; 2119 int work_done; 2120 2121 spin_lock(&tp->rx_lock); 2122 work_done = 0; 2123 if (likely(RTL_R16(IntrStatus) & RxAckBits)) 2124 work_done += rtl8139_rx(dev, tp, budget); 2125 2126 if (work_done < budget) { 2127 unsigned long flags; 2128 /* 2129 * Order is important since data can get interrupted 2130 * again when we think we are done. 2131 */ 2132 spin_lock_irqsave(&tp->lock, flags); 2133 __napi_complete(napi); 2134 RTL_W16_F(IntrMask, rtl8139_intr_mask); 2135 spin_unlock_irqrestore(&tp->lock, flags); 2136 } 2137 spin_unlock(&tp->rx_lock); 2138 2139 return work_done; 2140 } 2141 2142 /* The interrupt handler does all of the Rx thread work and cleans up 2143 after the Tx thread. */ 2144 static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance) 2145 { 2146 struct net_device *dev = (struct net_device *) dev_instance; 2147 struct rtl8139_private *tp = netdev_priv(dev); 2148 void __iomem *ioaddr = tp->mmio_addr; 2149 u16 status, ackstat; 2150 int link_changed = 0; /* avoid bogus "uninit" warning */ 2151 int handled = 0; 2152 2153 spin_lock (&tp->lock); 2154 status = RTL_R16 (IntrStatus); 2155 2156 /* shared irq? */ 2157 if (unlikely((status & rtl8139_intr_mask) == 0)) 2158 goto out; 2159 2160 handled = 1; 2161 2162 /* h/w no longer present (hotplug?) or major error, bail */ 2163 if (unlikely(status == 0xFFFF)) 2164 goto out; 2165 2166 /* close possible race's with dev_close */ 2167 if (unlikely(!netif_running(dev))) { 2168 RTL_W16 (IntrMask, 0); 2169 goto out; 2170 } 2171 2172 /* Acknowledge all of the current interrupt sources ASAP, but 2173 an first get an additional status bit from CSCR. */ 2174 if (unlikely(status & RxUnderrun)) 2175 link_changed = RTL_R16 (CSCR) & CSCR_LinkChangeBit; 2176 2177 ackstat = status & ~(RxAckBits | TxErr); 2178 if (ackstat) 2179 RTL_W16 (IntrStatus, ackstat); 2180 2181 /* Receive packets are processed by poll routine. 2182 If not running start it now. */ 2183 if (status & RxAckBits){ 2184 if (napi_schedule_prep(&tp->napi)) { 2185 RTL_W16_F (IntrMask, rtl8139_norx_intr_mask); 2186 __napi_schedule(&tp->napi); 2187 } 2188 } 2189 2190 /* Check uncommon events with one test. */ 2191 if (unlikely(status & (PCIErr | PCSTimeout | RxUnderrun | RxErr))) 2192 rtl8139_weird_interrupt (dev, tp, ioaddr, 2193 status, link_changed); 2194 2195 if (status & (TxOK | TxErr)) { 2196 rtl8139_tx_interrupt (dev, tp, ioaddr); 2197 if (status & TxErr) 2198 RTL_W16 (IntrStatus, TxErr); 2199 } 2200 out: 2201 spin_unlock (&tp->lock); 2202 2203 netdev_dbg(dev, "exiting interrupt, intr_status=%#4.4x\n", 2204 RTL_R16(IntrStatus)); 2205 return IRQ_RETVAL(handled); 2206 } 2207 2208 #ifdef CONFIG_NET_POLL_CONTROLLER 2209 /* 2210 * Polling receive - used by netconsole and other diagnostic tools 2211 * to allow network i/o with interrupts disabled. 2212 */ 2213 static void rtl8139_poll_controller(struct net_device *dev) 2214 { 2215 struct rtl8139_private *tp = netdev_priv(dev); 2216 const int irq = tp->pci_dev->irq; 2217 2218 disable_irq(irq); 2219 rtl8139_interrupt(irq, dev); 2220 enable_irq(irq); 2221 } 2222 #endif 2223 2224 static int rtl8139_set_mac_address(struct net_device *dev, void *p) 2225 { 2226 struct rtl8139_private *tp = netdev_priv(dev); 2227 void __iomem *ioaddr = tp->mmio_addr; 2228 struct sockaddr *addr = p; 2229 2230 if (!is_valid_ether_addr(addr->sa_data)) 2231 return -EADDRNOTAVAIL; 2232 2233 memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); 2234 2235 spin_lock_irq(&tp->lock); 2236 2237 RTL_W8_F(Cfg9346, Cfg9346_Unlock); 2238 RTL_W32_F(MAC0 + 0, cpu_to_le32 (*(u32 *) (dev->dev_addr + 0))); 2239 RTL_W32_F(MAC0 + 4, cpu_to_le32 (*(u32 *) (dev->dev_addr + 4))); 2240 RTL_W8_F(Cfg9346, Cfg9346_Lock); 2241 2242 spin_unlock_irq(&tp->lock); 2243 2244 return 0; 2245 } 2246 2247 static int rtl8139_close (struct net_device *dev) 2248 { 2249 struct rtl8139_private *tp = netdev_priv(dev); 2250 void __iomem *ioaddr = tp->mmio_addr; 2251 unsigned long flags; 2252 2253 netif_stop_queue(dev); 2254 napi_disable(&tp->napi); 2255 2256 netif_dbg(tp, ifdown, dev, "Shutting down ethercard, status was 0x%04x\n", 2257 RTL_R16(IntrStatus)); 2258 2259 spin_lock_irqsave (&tp->lock, flags); 2260 2261 /* Stop the chip's Tx and Rx DMA processes. */ 2262 RTL_W8 (ChipCmd, 0); 2263 2264 /* Disable interrupts by clearing the interrupt mask. */ 2265 RTL_W16 (IntrMask, 0); 2266 2267 /* Update the error counts. */ 2268 dev->stats.rx_missed_errors += RTL_R32 (RxMissed); 2269 RTL_W32 (RxMissed, 0); 2270 2271 spin_unlock_irqrestore (&tp->lock, flags); 2272 2273 free_irq(tp->pci_dev->irq, dev); 2274 2275 rtl8139_tx_clear (tp); 2276 2277 dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN, 2278 tp->rx_ring, tp->rx_ring_dma); 2279 dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN, 2280 tp->tx_bufs, tp->tx_bufs_dma); 2281 tp->rx_ring = NULL; 2282 tp->tx_bufs = NULL; 2283 2284 /* Green! Put the chip in low-power mode. */ 2285 RTL_W8 (Cfg9346, Cfg9346_Unlock); 2286 2287 if (rtl_chip_info[tp->chipset].flags & HasHltClk) 2288 RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */ 2289 2290 return 0; 2291 } 2292 2293 2294 /* Get the ethtool Wake-on-LAN settings. Assumes that wol points to 2295 kernel memory, *wol has been initialized as {ETHTOOL_GWOL}, and 2296 other threads or interrupts aren't messing with the 8139. */ 2297 static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) 2298 { 2299 struct rtl8139_private *tp = netdev_priv(dev); 2300 void __iomem *ioaddr = tp->mmio_addr; 2301 2302 spin_lock_irq(&tp->lock); 2303 if (rtl_chip_info[tp->chipset].flags & HasLWake) { 2304 u8 cfg3 = RTL_R8 (Config3); 2305 u8 cfg5 = RTL_R8 (Config5); 2306 2307 wol->supported = WAKE_PHY | WAKE_MAGIC 2308 | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST; 2309 2310 wol->wolopts = 0; 2311 if (cfg3 & Cfg3_LinkUp) 2312 wol->wolopts |= WAKE_PHY; 2313 if (cfg3 & Cfg3_Magic) 2314 wol->wolopts |= WAKE_MAGIC; 2315 /* (KON)FIXME: See how netdev_set_wol() handles the 2316 following constants. */ 2317 if (cfg5 & Cfg5_UWF) 2318 wol->wolopts |= WAKE_UCAST; 2319 if (cfg5 & Cfg5_MWF) 2320 wol->wolopts |= WAKE_MCAST; 2321 if (cfg5 & Cfg5_BWF) 2322 wol->wolopts |= WAKE_BCAST; 2323 } 2324 spin_unlock_irq(&tp->lock); 2325 } 2326 2327 2328 /* Set the ethtool Wake-on-LAN settings. Return 0 or -errno. Assumes 2329 that wol points to kernel memory and other threads or interrupts 2330 aren't messing with the 8139. */ 2331 static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) 2332 { 2333 struct rtl8139_private *tp = netdev_priv(dev); 2334 void __iomem *ioaddr = tp->mmio_addr; 2335 u32 support; 2336 u8 cfg3, cfg5; 2337 2338 support = ((rtl_chip_info[tp->chipset].flags & HasLWake) 2339 ? (WAKE_PHY | WAKE_MAGIC 2340 | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST) 2341 : 0); 2342 if (wol->wolopts & ~support) 2343 return -EINVAL; 2344 2345 spin_lock_irq(&tp->lock); 2346 cfg3 = RTL_R8 (Config3) & ~(Cfg3_LinkUp | Cfg3_Magic); 2347 if (wol->wolopts & WAKE_PHY) 2348 cfg3 |= Cfg3_LinkUp; 2349 if (wol->wolopts & WAKE_MAGIC) 2350 cfg3 |= Cfg3_Magic; 2351 RTL_W8 (Cfg9346, Cfg9346_Unlock); 2352 RTL_W8 (Config3, cfg3); 2353 RTL_W8 (Cfg9346, Cfg9346_Lock); 2354 2355 cfg5 = RTL_R8 (Config5) & ~(Cfg5_UWF | Cfg5_MWF | Cfg5_BWF); 2356 /* (KON)FIXME: These are untested. We may have to set the 2357 CRC0, Wakeup0 and LSBCRC0 registers too, but I have no 2358 documentation. */ 2359 if (wol->wolopts & WAKE_UCAST) 2360 cfg5 |= Cfg5_UWF; 2361 if (wol->wolopts & WAKE_MCAST) 2362 cfg5 |= Cfg5_MWF; 2363 if (wol->wolopts & WAKE_BCAST) 2364 cfg5 |= Cfg5_BWF; 2365 RTL_W8 (Config5, cfg5); /* need not unlock via Cfg9346 */ 2366 spin_unlock_irq(&tp->lock); 2367 2368 return 0; 2369 } 2370 2371 static void rtl8139_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) 2372 { 2373 struct rtl8139_private *tp = netdev_priv(dev); 2374 strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); 2375 strlcpy(info->version, DRV_VERSION, sizeof(info->version)); 2376 strlcpy(info->bus_info, pci_name(tp->pci_dev), sizeof(info->bus_info)); 2377 info->regdump_len = tp->regs_len; 2378 } 2379 2380 static int rtl8139_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) 2381 { 2382 struct rtl8139_private *tp = netdev_priv(dev); 2383 spin_lock_irq(&tp->lock); 2384 mii_ethtool_gset(&tp->mii, cmd); 2385 spin_unlock_irq(&tp->lock); 2386 return 0; 2387 } 2388 2389 static int rtl8139_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) 2390 { 2391 struct rtl8139_private *tp = netdev_priv(dev); 2392 int rc; 2393 spin_lock_irq(&tp->lock); 2394 rc = mii_ethtool_sset(&tp->mii, cmd); 2395 spin_unlock_irq(&tp->lock); 2396 return rc; 2397 } 2398 2399 static int rtl8139_nway_reset(struct net_device *dev) 2400 { 2401 struct rtl8139_private *tp = netdev_priv(dev); 2402 return mii_nway_restart(&tp->mii); 2403 } 2404 2405 static u32 rtl8139_get_link(struct net_device *dev) 2406 { 2407 struct rtl8139_private *tp = netdev_priv(dev); 2408 return mii_link_ok(&tp->mii); 2409 } 2410 2411 static u32 rtl8139_get_msglevel(struct net_device *dev) 2412 { 2413 struct rtl8139_private *tp = netdev_priv(dev); 2414 return tp->msg_enable; 2415 } 2416 2417 static void rtl8139_set_msglevel(struct net_device *dev, u32 datum) 2418 { 2419 struct rtl8139_private *tp = netdev_priv(dev); 2420 tp->msg_enable = datum; 2421 } 2422 2423 static int rtl8139_get_regs_len(struct net_device *dev) 2424 { 2425 struct rtl8139_private *tp; 2426 /* TODO: we are too slack to do reg dumping for pio, for now */ 2427 if (use_io) 2428 return 0; 2429 tp = netdev_priv(dev); 2430 return tp->regs_len; 2431 } 2432 2433 static void rtl8139_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf) 2434 { 2435 struct rtl8139_private *tp; 2436 2437 /* TODO: we are too slack to do reg dumping for pio, for now */ 2438 if (use_io) 2439 return; 2440 tp = netdev_priv(dev); 2441 2442 regs->version = RTL_REGS_VER; 2443 2444 spin_lock_irq(&tp->lock); 2445 memcpy_fromio(regbuf, tp->mmio_addr, regs->len); 2446 spin_unlock_irq(&tp->lock); 2447 } 2448 2449 static int rtl8139_get_sset_count(struct net_device *dev, int sset) 2450 { 2451 switch (sset) { 2452 case ETH_SS_STATS: 2453 return RTL_NUM_STATS; 2454 default: 2455 return -EOPNOTSUPP; 2456 } 2457 } 2458 2459 static void rtl8139_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data) 2460 { 2461 struct rtl8139_private *tp = netdev_priv(dev); 2462 2463 data[0] = tp->xstats.early_rx; 2464 data[1] = tp->xstats.tx_buf_mapped; 2465 data[2] = tp->xstats.tx_timeouts; 2466 data[3] = tp->xstats.rx_lost_in_ring; 2467 } 2468 2469 static void rtl8139_get_strings(struct net_device *dev, u32 stringset, u8 *data) 2470 { 2471 memcpy(data, ethtool_stats_keys, sizeof(ethtool_stats_keys)); 2472 } 2473 2474 static const struct ethtool_ops rtl8139_ethtool_ops = { 2475 .get_drvinfo = rtl8139_get_drvinfo, 2476 .get_settings = rtl8139_get_settings, 2477 .set_settings = rtl8139_set_settings, 2478 .get_regs_len = rtl8139_get_regs_len, 2479 .get_regs = rtl8139_get_regs, 2480 .nway_reset = rtl8139_nway_reset, 2481 .get_link = rtl8139_get_link, 2482 .get_msglevel = rtl8139_get_msglevel, 2483 .set_msglevel = rtl8139_set_msglevel, 2484 .get_wol = rtl8139_get_wol, 2485 .set_wol = rtl8139_set_wol, 2486 .get_strings = rtl8139_get_strings, 2487 .get_sset_count = rtl8139_get_sset_count, 2488 .get_ethtool_stats = rtl8139_get_ethtool_stats, 2489 }; 2490 2491 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) 2492 { 2493 struct rtl8139_private *tp = netdev_priv(dev); 2494 int rc; 2495 2496 if (!netif_running(dev)) 2497 return -EINVAL; 2498 2499 spin_lock_irq(&tp->lock); 2500 rc = generic_mii_ioctl(&tp->mii, if_mii(rq), cmd, NULL); 2501 spin_unlock_irq(&tp->lock); 2502 2503 return rc; 2504 } 2505 2506 2507 static struct rtnl_link_stats64 * 2508 rtl8139_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats) 2509 { 2510 struct rtl8139_private *tp = netdev_priv(dev); 2511 void __iomem *ioaddr = tp->mmio_addr; 2512 unsigned long flags; 2513 unsigned int start; 2514 2515 if (netif_running(dev)) { 2516 spin_lock_irqsave (&tp->lock, flags); 2517 dev->stats.rx_missed_errors += RTL_R32 (RxMissed); 2518 RTL_W32 (RxMissed, 0); 2519 spin_unlock_irqrestore (&tp->lock, flags); 2520 } 2521 2522 netdev_stats_to_stats64(stats, &dev->stats); 2523 2524 do { 2525 start = u64_stats_fetch_begin_irq(&tp->rx_stats.syncp); 2526 stats->rx_packets = tp->rx_stats.packets; 2527 stats->rx_bytes = tp->rx_stats.bytes; 2528 } while (u64_stats_fetch_retry_irq(&tp->rx_stats.syncp, start)); 2529 2530 do { 2531 start = u64_stats_fetch_begin_irq(&tp->tx_stats.syncp); 2532 stats->tx_packets = tp->tx_stats.packets; 2533 stats->tx_bytes = tp->tx_stats.bytes; 2534 } while (u64_stats_fetch_retry_irq(&tp->tx_stats.syncp, start)); 2535 2536 return stats; 2537 } 2538 2539 /* Set or clear the multicast filter for this adaptor. 2540 This routine is not state sensitive and need not be SMP locked. */ 2541 2542 static void __set_rx_mode (struct net_device *dev) 2543 { 2544 struct rtl8139_private *tp = netdev_priv(dev); 2545 void __iomem *ioaddr = tp->mmio_addr; 2546 u32 mc_filter[2]; /* Multicast hash filter */ 2547 int rx_mode; 2548 u32 tmp; 2549 2550 netdev_dbg(dev, "rtl8139_set_rx_mode(%04x) done -- Rx config %08x\n", 2551 dev->flags, RTL_R32(RxConfig)); 2552 2553 /* Note: do not reorder, GCC is clever about common statements. */ 2554 if (dev->flags & IFF_PROMISC) { 2555 rx_mode = 2556 AcceptBroadcast | AcceptMulticast | AcceptMyPhys | 2557 AcceptAllPhys; 2558 mc_filter[1] = mc_filter[0] = 0xffffffff; 2559 } else if ((netdev_mc_count(dev) > multicast_filter_limit) || 2560 (dev->flags & IFF_ALLMULTI)) { 2561 /* Too many to filter perfectly -- accept all multicasts. */ 2562 rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; 2563 mc_filter[1] = mc_filter[0] = 0xffffffff; 2564 } else { 2565 struct netdev_hw_addr *ha; 2566 rx_mode = AcceptBroadcast | AcceptMyPhys; 2567 mc_filter[1] = mc_filter[0] = 0; 2568 netdev_for_each_mc_addr(ha, dev) { 2569 int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26; 2570 2571 mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); 2572 rx_mode |= AcceptMulticast; 2573 } 2574 } 2575 2576 if (dev->features & NETIF_F_RXALL) 2577 rx_mode |= (AcceptErr | AcceptRunt); 2578 2579 /* We can safely update without stopping the chip. */ 2580 tmp = rtl8139_rx_config | rx_mode; 2581 if (tp->rx_config != tmp) { 2582 RTL_W32_F (RxConfig, tmp); 2583 tp->rx_config = tmp; 2584 } 2585 RTL_W32_F (MAR0 + 0, mc_filter[0]); 2586 RTL_W32_F (MAR0 + 4, mc_filter[1]); 2587 } 2588 2589 static void rtl8139_set_rx_mode (struct net_device *dev) 2590 { 2591 unsigned long flags; 2592 struct rtl8139_private *tp = netdev_priv(dev); 2593 2594 spin_lock_irqsave (&tp->lock, flags); 2595 __set_rx_mode(dev); 2596 spin_unlock_irqrestore (&tp->lock, flags); 2597 } 2598 2599 #ifdef CONFIG_PM 2600 2601 static int rtl8139_suspend (struct pci_dev *pdev, pm_message_t state) 2602 { 2603 struct net_device *dev = pci_get_drvdata (pdev); 2604 struct rtl8139_private *tp = netdev_priv(dev); 2605 void __iomem *ioaddr = tp->mmio_addr; 2606 unsigned long flags; 2607 2608 pci_save_state (pdev); 2609 2610 if (!netif_running (dev)) 2611 return 0; 2612 2613 netif_device_detach (dev); 2614 2615 spin_lock_irqsave (&tp->lock, flags); 2616 2617 /* Disable interrupts, stop Tx and Rx. */ 2618 RTL_W16 (IntrMask, 0); 2619 RTL_W8 (ChipCmd, 0); 2620 2621 /* Update the error counts. */ 2622 dev->stats.rx_missed_errors += RTL_R32 (RxMissed); 2623 RTL_W32 (RxMissed, 0); 2624 2625 spin_unlock_irqrestore (&tp->lock, flags); 2626 2627 pci_set_power_state (pdev, PCI_D3hot); 2628 2629 return 0; 2630 } 2631 2632 2633 static int rtl8139_resume (struct pci_dev *pdev) 2634 { 2635 struct net_device *dev = pci_get_drvdata (pdev); 2636 2637 pci_restore_state (pdev); 2638 if (!netif_running (dev)) 2639 return 0; 2640 pci_set_power_state (pdev, PCI_D0); 2641 rtl8139_init_ring (dev); 2642 rtl8139_hw_start (dev); 2643 netif_device_attach (dev); 2644 return 0; 2645 } 2646 2647 #endif /* CONFIG_PM */ 2648 2649 2650 static struct pci_driver rtl8139_pci_driver = { 2651 .name = DRV_NAME, 2652 .id_table = rtl8139_pci_tbl, 2653 .probe = rtl8139_init_one, 2654 .remove = rtl8139_remove_one, 2655 #ifdef CONFIG_PM 2656 .suspend = rtl8139_suspend, 2657 .resume = rtl8139_resume, 2658 #endif /* CONFIG_PM */ 2659 }; 2660 2661 2662 static int __init rtl8139_init_module (void) 2663 { 2664 /* when we're a module, we always print a version message, 2665 * even if no 8139 board is found. 2666 */ 2667 #ifdef MODULE 2668 pr_info(RTL8139_DRIVER_NAME "\n"); 2669 #endif 2670 2671 return pci_register_driver(&rtl8139_pci_driver); 2672 } 2673 2674 2675 static void __exit rtl8139_cleanup_module (void) 2676 { 2677 pci_unregister_driver (&rtl8139_pci_driver); 2678 } 2679 2680 2681 module_init(rtl8139_init_module); 2682 module_exit(rtl8139_cleanup_module); 2683