1 // SPDX-License-Identifier: GPL-2.0-only 2 /* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. 3 */ 4 5 /* Qualcomm Technologies, Inc. EMAC PHY Controller driver. 6 */ 7 8 #include <linux/of_mdio.h> 9 #include <linux/phy.h> 10 #include <linux/iopoll.h> 11 #include <linux/acpi.h> 12 #include "emac.h" 13 14 /* EMAC base register offsets */ 15 #define EMAC_MDIO_CTRL 0x001414 16 #define EMAC_PHY_STS 0x001418 17 #define EMAC_MDIO_EX_CTRL 0x001440 18 19 /* EMAC_MDIO_CTRL */ 20 #define MDIO_MODE BIT(30) 21 #define MDIO_PR BIT(29) 22 #define MDIO_AP_EN BIT(28) 23 #define MDIO_BUSY BIT(27) 24 #define MDIO_CLK_SEL_BMSK 0x7000000 25 #define MDIO_CLK_SEL_SHFT 24 26 #define MDIO_START BIT(23) 27 #define SUP_PREAMBLE BIT(22) 28 #define MDIO_RD_NWR BIT(21) 29 #define MDIO_REG_ADDR_BMSK 0x1f0000 30 #define MDIO_REG_ADDR_SHFT 16 31 #define MDIO_DATA_BMSK 0xffff 32 #define MDIO_DATA_SHFT 0 33 34 /* EMAC_PHY_STS */ 35 #define PHY_ADDR_BMSK 0x1f0000 36 #define PHY_ADDR_SHFT 16 37 38 #define MDIO_CLK_25_4 0 39 #define MDIO_CLK_25_28 7 40 41 #define MDIO_WAIT_TIMES 1000 42 #define MDIO_STATUS_DELAY_TIME 1 43 44 static int emac_mdio_read(struct mii_bus *bus, int addr, int regnum) 45 { 46 struct emac_adapter *adpt = bus->priv; 47 u32 reg; 48 49 emac_reg_update32(adpt->base + EMAC_PHY_STS, PHY_ADDR_BMSK, 50 (addr << PHY_ADDR_SHFT)); 51 52 reg = SUP_PREAMBLE | 53 ((MDIO_CLK_25_4 << MDIO_CLK_SEL_SHFT) & MDIO_CLK_SEL_BMSK) | 54 ((regnum << MDIO_REG_ADDR_SHFT) & MDIO_REG_ADDR_BMSK) | 55 MDIO_START | MDIO_RD_NWR; 56 57 writel(reg, adpt->base + EMAC_MDIO_CTRL); 58 59 if (readl_poll_timeout(adpt->base + EMAC_MDIO_CTRL, reg, 60 !(reg & (MDIO_START | MDIO_BUSY)), 61 MDIO_STATUS_DELAY_TIME, MDIO_WAIT_TIMES * 100)) 62 return -EIO; 63 64 return (reg >> MDIO_DATA_SHFT) & MDIO_DATA_BMSK; 65 } 66 67 static int emac_mdio_write(struct mii_bus *bus, int addr, int regnum, u16 val) 68 { 69 struct emac_adapter *adpt = bus->priv; 70 u32 reg; 71 72 emac_reg_update32(adpt->base + EMAC_PHY_STS, PHY_ADDR_BMSK, 73 (addr << PHY_ADDR_SHFT)); 74 75 reg = SUP_PREAMBLE | 76 ((MDIO_CLK_25_4 << MDIO_CLK_SEL_SHFT) & MDIO_CLK_SEL_BMSK) | 77 ((regnum << MDIO_REG_ADDR_SHFT) & MDIO_REG_ADDR_BMSK) | 78 ((val << MDIO_DATA_SHFT) & MDIO_DATA_BMSK) | 79 MDIO_START; 80 81 writel(reg, adpt->base + EMAC_MDIO_CTRL); 82 83 if (readl_poll_timeout(adpt->base + EMAC_MDIO_CTRL, reg, 84 !(reg & (MDIO_START | MDIO_BUSY)), 85 MDIO_STATUS_DELAY_TIME, MDIO_WAIT_TIMES * 100)) 86 return -EIO; 87 88 return 0; 89 } 90 91 /* Configure the MDIO bus and connect the external PHY */ 92 int emac_phy_config(struct platform_device *pdev, struct emac_adapter *adpt) 93 { 94 struct device_node *np = pdev->dev.of_node; 95 struct mii_bus *mii_bus; 96 int ret; 97 98 /* Create the mii_bus object for talking to the MDIO bus */ 99 adpt->mii_bus = mii_bus = devm_mdiobus_alloc(&pdev->dev); 100 if (!mii_bus) 101 return -ENOMEM; 102 103 mii_bus->name = "emac-mdio"; 104 snprintf(mii_bus->id, MII_BUS_ID_SIZE, "%s", pdev->name); 105 mii_bus->read = emac_mdio_read; 106 mii_bus->write = emac_mdio_write; 107 mii_bus->parent = &pdev->dev; 108 mii_bus->priv = adpt; 109 110 if (has_acpi_companion(&pdev->dev)) { 111 u32 phy_addr; 112 113 ret = mdiobus_register(mii_bus); 114 if (ret) { 115 dev_err(&pdev->dev, "could not register mdio bus\n"); 116 return ret; 117 } 118 ret = device_property_read_u32(&pdev->dev, "phy-channel", 119 &phy_addr); 120 if (ret) 121 /* If we can't read a valid phy address, then assume 122 * that there is only one phy on this mdio bus. 123 */ 124 adpt->phydev = phy_find_first(mii_bus); 125 else 126 adpt->phydev = mdiobus_get_phy(mii_bus, phy_addr); 127 128 /* of_phy_find_device() claims a reference to the phydev, 129 * so we do that here manually as well. When the driver 130 * later unloads, it can unilaterally drop the reference 131 * without worrying about ACPI vs DT. 132 */ 133 if (adpt->phydev) 134 get_device(&adpt->phydev->mdio.dev); 135 } else { 136 struct device_node *phy_np; 137 138 ret = of_mdiobus_register(mii_bus, np); 139 if (ret) { 140 dev_err(&pdev->dev, "could not register mdio bus\n"); 141 return ret; 142 } 143 144 phy_np = of_parse_phandle(np, "phy-handle", 0); 145 adpt->phydev = of_phy_find_device(phy_np); 146 of_node_put(phy_np); 147 } 148 149 if (!adpt->phydev) { 150 dev_err(&pdev->dev, "could not find external phy\n"); 151 mdiobus_unregister(mii_bus); 152 return -ENODEV; 153 } 154 155 return 0; 156 } 157