1# SPDX-License-Identifier: GPL-2.0-only
2#
3# QLogic network device configuration
4#
5
6config NET_VENDOR_QLOGIC
7	bool "QLogic devices"
8	default y
9	depends on PCI
10	help
11	  If you have a network (Ethernet) card belonging to this class, say Y.
12
13	  Note that the answer to this question doesn't directly affect the
14	  kernel: saying N will just cause the configurator to skip all
15	  the questions about QLogic cards. If you say Y, you will be asked for
16	  your specific card in the following questions.
17
18if NET_VENDOR_QLOGIC
19
20config QLA3XXX
21	tristate "QLogic QLA3XXX Network Driver Support"
22	depends on PCI
23	help
24	  This driver supports QLogic ISP3XXX gigabit Ethernet cards.
25
26	  To compile this driver as a module, choose M here: the module
27	  will be called qla3xxx.
28
29config QLCNIC
30	tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
31	depends on PCI
32	select FW_LOADER
33	help
34	  This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
35	  devices.
36
37config QLCNIC_SRIOV
38	bool "QLOGIC QLCNIC 83XX family SR-IOV Support"
39	depends on QLCNIC && PCI_IOV
40	default y
41	help
42	  This configuration parameter enables Single Root Input Output
43	  Virtualization support for QLE83XX Converged Ethernet devices.
44	  This allows for virtual function acceleration in virtualized
45	  environments.
46
47config QLCNIC_DCB
48	bool "QLOGIC QLCNIC 82XX and 83XX family DCB Support"
49	depends on QLCNIC && DCB
50	default y
51	help
52	  This configuration parameter enables DCB support in QLE83XX
53	  and QLE82XX Converged Ethernet devices. This allows for DCB
54	  get operations support through rtNetlink interface. Only CEE
55	  mode of DCB is supported. PG and PFC values are related only
56	  to Tx.
57
58config QLCNIC_HWMON
59	bool "QLOGIC QLCNIC 82XX and 83XX family HWMON support"
60	depends on QLCNIC && HWMON && !(QLCNIC=y && HWMON=m)
61	default y
62	help
63	  This configuration parameter can be used to read the
64	  board temperature in Converged Ethernet devices
65	  supported by qlcnic.
66
67	  This data is available via the hwmon sysfs interface.
68
69config NETXEN_NIC
70	tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
71	depends on PCI
72	select FW_LOADER
73	help
74	  This enables the support for NetXen's Gigabit Ethernet card.
75
76config QED
77	tristate "QLogic QED 25/40/100Gb core driver"
78	depends on PCI
79	select ZLIB_INFLATE
80	select CRC8
81	select CRC32
82	select NET_DEVLINK
83	help
84	  This enables the support for Marvell FastLinQ adapters family.
85
86config QED_LL2
87	bool
88
89config QED_SRIOV
90	bool "QLogic QED 25/40/100Gb SR-IOV support"
91	depends on QED && PCI_IOV
92	default y
93	help
94	  This configuration parameter enables Single Root Input Output
95	  Virtualization support for QED devices.
96	  This allows for virtual function acceleration in virtualized
97	  environments.
98
99config QEDE
100	tristate "QLogic QED 25/40/100Gb Ethernet NIC"
101	depends on QED
102	imply PTP_1588_CLOCK
103	help
104	  This enables the support for Marvell FastLinQ adapters family,
105	  ethernet driver.
106
107config QED_RDMA
108	bool
109
110config QED_ISCSI
111	bool
112
113config QED_NVMETCP
114	bool
115
116config QED_FCOE
117	bool
118
119config QED_OOO
120	bool
121
122endif # NET_VENDOR_QLOGIC
123