1 /************************************************************************ 2 * s2io.c: A Linux PCI-X Ethernet driver for Neterion 10GbE Server NIC 3 * Copyright(c) 2002-2010 Exar Corp. 4 * 5 * This software may be used and distributed according to the terms of 6 * the GNU General Public License (GPL), incorporated herein by reference. 7 * Drivers based on or derived from this code fall under the GPL and must 8 * retain the authorship, copyright and license notice. This file is not 9 * a complete program and may only be used when the entire operating 10 * system is licensed under the GPL. 11 * See the file COPYING in this distribution for more information. 12 * 13 * Credits: 14 * Jeff Garzik : For pointing out the improper error condition 15 * check in the s2io_xmit routine and also some 16 * issues in the Tx watch dog function. Also for 17 * patiently answering all those innumerable 18 * questions regaring the 2.6 porting issues. 19 * Stephen Hemminger : Providing proper 2.6 porting mechanism for some 20 * macros available only in 2.6 Kernel. 21 * Francois Romieu : For pointing out all code part that were 22 * deprecated and also styling related comments. 23 * Grant Grundler : For helping me get rid of some Architecture 24 * dependent code. 25 * Christopher Hellwig : Some more 2.6 specific issues in the driver. 26 * 27 * The module loadable parameters that are supported by the driver and a brief 28 * explanation of all the variables. 29 * 30 * rx_ring_num : This can be used to program the number of receive rings used 31 * in the driver. 32 * rx_ring_sz: This defines the number of receive blocks each ring can have. 33 * This is also an array of size 8. 34 * rx_ring_mode: This defines the operation mode of all 8 rings. The valid 35 * values are 1, 2. 36 * tx_fifo_num: This defines the number of Tx FIFOs thats used int the driver. 37 * tx_fifo_len: This too is an array of 8. Each element defines the number of 38 * Tx descriptors that can be associated with each corresponding FIFO. 39 * intr_type: This defines the type of interrupt. The values can be 0(INTA), 40 * 2(MSI_X). Default value is '2(MSI_X)' 41 * lro_max_pkts: This parameter defines maximum number of packets can be 42 * aggregated as a single large packet 43 * napi: This parameter used to enable/disable NAPI (polling Rx) 44 * Possible values '1' for enable and '0' for disable. Default is '1' 45 * vlan_tag_strip: This can be used to enable or disable vlan stripping. 46 * Possible values '1' for enable , '0' for disable. 47 * Default is '2' - which means disable in promisc mode 48 * and enable in non-promiscuous mode. 49 * multiq: This parameter used to enable/disable MULTIQUEUE support. 50 * Possible values '1' for enable and '0' for disable. Default is '0' 51 ************************************************************************/ 52 53 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 54 55 #include <linux/module.h> 56 #include <linux/types.h> 57 #include <linux/errno.h> 58 #include <linux/ioport.h> 59 #include <linux/pci.h> 60 #include <linux/dma-mapping.h> 61 #include <linux/kernel.h> 62 #include <linux/netdevice.h> 63 #include <linux/etherdevice.h> 64 #include <linux/mdio.h> 65 #include <linux/skbuff.h> 66 #include <linux/init.h> 67 #include <linux/delay.h> 68 #include <linux/stddef.h> 69 #include <linux/ioctl.h> 70 #include <linux/timex.h> 71 #include <linux/ethtool.h> 72 #include <linux/workqueue.h> 73 #include <linux/if_vlan.h> 74 #include <linux/ip.h> 75 #include <linux/tcp.h> 76 #include <linux/uaccess.h> 77 #include <linux/io.h> 78 #include <linux/io-64-nonatomic-lo-hi.h> 79 #include <linux/slab.h> 80 #include <linux/prefetch.h> 81 #include <net/tcp.h> 82 #include <net/checksum.h> 83 84 #include <asm/div64.h> 85 #include <asm/irq.h> 86 87 /* local include */ 88 #include "s2io.h" 89 #include "s2io-regs.h" 90 91 #define DRV_VERSION "2.0.26.28" 92 93 /* S2io Driver name & version. */ 94 static const char s2io_driver_name[] = "Neterion"; 95 static const char s2io_driver_version[] = DRV_VERSION; 96 97 static const int rxd_size[2] = {32, 48}; 98 static const int rxd_count[2] = {127, 85}; 99 100 static inline int RXD_IS_UP2DT(struct RxD_t *rxdp) 101 { 102 int ret; 103 104 ret = ((!(rxdp->Control_1 & RXD_OWN_XENA)) && 105 (GET_RXD_MARKER(rxdp->Control_2) != THE_RXD_MARK)); 106 107 return ret; 108 } 109 110 /* 111 * Cards with following subsystem_id have a link state indication 112 * problem, 600B, 600C, 600D, 640B, 640C and 640D. 113 * macro below identifies these cards given the subsystem_id. 114 */ 115 #define CARDS_WITH_FAULTY_LINK_INDICATORS(dev_type, subid) \ 116 (dev_type == XFRAME_I_DEVICE) ? \ 117 ((((subid >= 0x600B) && (subid <= 0x600D)) || \ 118 ((subid >= 0x640B) && (subid <= 0x640D))) ? 1 : 0) : 0 119 120 #define LINK_IS_UP(val64) (!(val64 & (ADAPTER_STATUS_RMAC_REMOTE_FAULT | \ 121 ADAPTER_STATUS_RMAC_LOCAL_FAULT))) 122 123 static inline int is_s2io_card_up(const struct s2io_nic *sp) 124 { 125 return test_bit(__S2IO_STATE_CARD_UP, &sp->state); 126 } 127 128 /* Ethtool related variables and Macros. */ 129 static const char s2io_gstrings[][ETH_GSTRING_LEN] = { 130 "Register test\t(offline)", 131 "Eeprom test\t(offline)", 132 "Link test\t(online)", 133 "RLDRAM test\t(offline)", 134 "BIST Test\t(offline)" 135 }; 136 137 static const char ethtool_xena_stats_keys[][ETH_GSTRING_LEN] = { 138 {"tmac_frms"}, 139 {"tmac_data_octets"}, 140 {"tmac_drop_frms"}, 141 {"tmac_mcst_frms"}, 142 {"tmac_bcst_frms"}, 143 {"tmac_pause_ctrl_frms"}, 144 {"tmac_ttl_octets"}, 145 {"tmac_ucst_frms"}, 146 {"tmac_nucst_frms"}, 147 {"tmac_any_err_frms"}, 148 {"tmac_ttl_less_fb_octets"}, 149 {"tmac_vld_ip_octets"}, 150 {"tmac_vld_ip"}, 151 {"tmac_drop_ip"}, 152 {"tmac_icmp"}, 153 {"tmac_rst_tcp"}, 154 {"tmac_tcp"}, 155 {"tmac_udp"}, 156 {"rmac_vld_frms"}, 157 {"rmac_data_octets"}, 158 {"rmac_fcs_err_frms"}, 159 {"rmac_drop_frms"}, 160 {"rmac_vld_mcst_frms"}, 161 {"rmac_vld_bcst_frms"}, 162 {"rmac_in_rng_len_err_frms"}, 163 {"rmac_out_rng_len_err_frms"}, 164 {"rmac_long_frms"}, 165 {"rmac_pause_ctrl_frms"}, 166 {"rmac_unsup_ctrl_frms"}, 167 {"rmac_ttl_octets"}, 168 {"rmac_accepted_ucst_frms"}, 169 {"rmac_accepted_nucst_frms"}, 170 {"rmac_discarded_frms"}, 171 {"rmac_drop_events"}, 172 {"rmac_ttl_less_fb_octets"}, 173 {"rmac_ttl_frms"}, 174 {"rmac_usized_frms"}, 175 {"rmac_osized_frms"}, 176 {"rmac_frag_frms"}, 177 {"rmac_jabber_frms"}, 178 {"rmac_ttl_64_frms"}, 179 {"rmac_ttl_65_127_frms"}, 180 {"rmac_ttl_128_255_frms"}, 181 {"rmac_ttl_256_511_frms"}, 182 {"rmac_ttl_512_1023_frms"}, 183 {"rmac_ttl_1024_1518_frms"}, 184 {"rmac_ip"}, 185 {"rmac_ip_octets"}, 186 {"rmac_hdr_err_ip"}, 187 {"rmac_drop_ip"}, 188 {"rmac_icmp"}, 189 {"rmac_tcp"}, 190 {"rmac_udp"}, 191 {"rmac_err_drp_udp"}, 192 {"rmac_xgmii_err_sym"}, 193 {"rmac_frms_q0"}, 194 {"rmac_frms_q1"}, 195 {"rmac_frms_q2"}, 196 {"rmac_frms_q3"}, 197 {"rmac_frms_q4"}, 198 {"rmac_frms_q5"}, 199 {"rmac_frms_q6"}, 200 {"rmac_frms_q7"}, 201 {"rmac_full_q0"}, 202 {"rmac_full_q1"}, 203 {"rmac_full_q2"}, 204 {"rmac_full_q3"}, 205 {"rmac_full_q4"}, 206 {"rmac_full_q5"}, 207 {"rmac_full_q6"}, 208 {"rmac_full_q7"}, 209 {"rmac_pause_cnt"}, 210 {"rmac_xgmii_data_err_cnt"}, 211 {"rmac_xgmii_ctrl_err_cnt"}, 212 {"rmac_accepted_ip"}, 213 {"rmac_err_tcp"}, 214 {"rd_req_cnt"}, 215 {"new_rd_req_cnt"}, 216 {"new_rd_req_rtry_cnt"}, 217 {"rd_rtry_cnt"}, 218 {"wr_rtry_rd_ack_cnt"}, 219 {"wr_req_cnt"}, 220 {"new_wr_req_cnt"}, 221 {"new_wr_req_rtry_cnt"}, 222 {"wr_rtry_cnt"}, 223 {"wr_disc_cnt"}, 224 {"rd_rtry_wr_ack_cnt"}, 225 {"txp_wr_cnt"}, 226 {"txd_rd_cnt"}, 227 {"txd_wr_cnt"}, 228 {"rxd_rd_cnt"}, 229 {"rxd_wr_cnt"}, 230 {"txf_rd_cnt"}, 231 {"rxf_wr_cnt"} 232 }; 233 234 static const char ethtool_enhanced_stats_keys[][ETH_GSTRING_LEN] = { 235 {"rmac_ttl_1519_4095_frms"}, 236 {"rmac_ttl_4096_8191_frms"}, 237 {"rmac_ttl_8192_max_frms"}, 238 {"rmac_ttl_gt_max_frms"}, 239 {"rmac_osized_alt_frms"}, 240 {"rmac_jabber_alt_frms"}, 241 {"rmac_gt_max_alt_frms"}, 242 {"rmac_vlan_frms"}, 243 {"rmac_len_discard"}, 244 {"rmac_fcs_discard"}, 245 {"rmac_pf_discard"}, 246 {"rmac_da_discard"}, 247 {"rmac_red_discard"}, 248 {"rmac_rts_discard"}, 249 {"rmac_ingm_full_discard"}, 250 {"link_fault_cnt"} 251 }; 252 253 static const char ethtool_driver_stats_keys[][ETH_GSTRING_LEN] = { 254 {"\n DRIVER STATISTICS"}, 255 {"single_bit_ecc_errs"}, 256 {"double_bit_ecc_errs"}, 257 {"parity_err_cnt"}, 258 {"serious_err_cnt"}, 259 {"soft_reset_cnt"}, 260 {"fifo_full_cnt"}, 261 {"ring_0_full_cnt"}, 262 {"ring_1_full_cnt"}, 263 {"ring_2_full_cnt"}, 264 {"ring_3_full_cnt"}, 265 {"ring_4_full_cnt"}, 266 {"ring_5_full_cnt"}, 267 {"ring_6_full_cnt"}, 268 {"ring_7_full_cnt"}, 269 {"alarm_transceiver_temp_high"}, 270 {"alarm_transceiver_temp_low"}, 271 {"alarm_laser_bias_current_high"}, 272 {"alarm_laser_bias_current_low"}, 273 {"alarm_laser_output_power_high"}, 274 {"alarm_laser_output_power_low"}, 275 {"warn_transceiver_temp_high"}, 276 {"warn_transceiver_temp_low"}, 277 {"warn_laser_bias_current_high"}, 278 {"warn_laser_bias_current_low"}, 279 {"warn_laser_output_power_high"}, 280 {"warn_laser_output_power_low"}, 281 {"lro_aggregated_pkts"}, 282 {"lro_flush_both_count"}, 283 {"lro_out_of_sequence_pkts"}, 284 {"lro_flush_due_to_max_pkts"}, 285 {"lro_avg_aggr_pkts"}, 286 {"mem_alloc_fail_cnt"}, 287 {"pci_map_fail_cnt"}, 288 {"watchdog_timer_cnt"}, 289 {"mem_allocated"}, 290 {"mem_freed"}, 291 {"link_up_cnt"}, 292 {"link_down_cnt"}, 293 {"link_up_time"}, 294 {"link_down_time"}, 295 {"tx_tcode_buf_abort_cnt"}, 296 {"tx_tcode_desc_abort_cnt"}, 297 {"tx_tcode_parity_err_cnt"}, 298 {"tx_tcode_link_loss_cnt"}, 299 {"tx_tcode_list_proc_err_cnt"}, 300 {"rx_tcode_parity_err_cnt"}, 301 {"rx_tcode_abort_cnt"}, 302 {"rx_tcode_parity_abort_cnt"}, 303 {"rx_tcode_rda_fail_cnt"}, 304 {"rx_tcode_unkn_prot_cnt"}, 305 {"rx_tcode_fcs_err_cnt"}, 306 {"rx_tcode_buf_size_err_cnt"}, 307 {"rx_tcode_rxd_corrupt_cnt"}, 308 {"rx_tcode_unkn_err_cnt"}, 309 {"tda_err_cnt"}, 310 {"pfc_err_cnt"}, 311 {"pcc_err_cnt"}, 312 {"tti_err_cnt"}, 313 {"tpa_err_cnt"}, 314 {"sm_err_cnt"}, 315 {"lso_err_cnt"}, 316 {"mac_tmac_err_cnt"}, 317 {"mac_rmac_err_cnt"}, 318 {"xgxs_txgxs_err_cnt"}, 319 {"xgxs_rxgxs_err_cnt"}, 320 {"rc_err_cnt"}, 321 {"prc_pcix_err_cnt"}, 322 {"rpa_err_cnt"}, 323 {"rda_err_cnt"}, 324 {"rti_err_cnt"}, 325 {"mc_err_cnt"} 326 }; 327 328 #define S2IO_XENA_STAT_LEN ARRAY_SIZE(ethtool_xena_stats_keys) 329 #define S2IO_ENHANCED_STAT_LEN ARRAY_SIZE(ethtool_enhanced_stats_keys) 330 #define S2IO_DRIVER_STAT_LEN ARRAY_SIZE(ethtool_driver_stats_keys) 331 332 #define XFRAME_I_STAT_LEN (S2IO_XENA_STAT_LEN + S2IO_DRIVER_STAT_LEN) 333 #define XFRAME_II_STAT_LEN (XFRAME_I_STAT_LEN + S2IO_ENHANCED_STAT_LEN) 334 335 #define XFRAME_I_STAT_STRINGS_LEN (XFRAME_I_STAT_LEN * ETH_GSTRING_LEN) 336 #define XFRAME_II_STAT_STRINGS_LEN (XFRAME_II_STAT_LEN * ETH_GSTRING_LEN) 337 338 #define S2IO_TEST_LEN ARRAY_SIZE(s2io_gstrings) 339 #define S2IO_STRINGS_LEN (S2IO_TEST_LEN * ETH_GSTRING_LEN) 340 341 /* copy mac addr to def_mac_addr array */ 342 static void do_s2io_copy_mac_addr(struct s2io_nic *sp, int offset, u64 mac_addr) 343 { 344 sp->def_mac_addr[offset].mac_addr[5] = (u8) (mac_addr); 345 sp->def_mac_addr[offset].mac_addr[4] = (u8) (mac_addr >> 8); 346 sp->def_mac_addr[offset].mac_addr[3] = (u8) (mac_addr >> 16); 347 sp->def_mac_addr[offset].mac_addr[2] = (u8) (mac_addr >> 24); 348 sp->def_mac_addr[offset].mac_addr[1] = (u8) (mac_addr >> 32); 349 sp->def_mac_addr[offset].mac_addr[0] = (u8) (mac_addr >> 40); 350 } 351 352 /* 353 * Constants to be programmed into the Xena's registers, to configure 354 * the XAUI. 355 */ 356 357 #define END_SIGN 0x0 358 static const u64 herc_act_dtx_cfg[] = { 359 /* Set address */ 360 0x8000051536750000ULL, 0x80000515367500E0ULL, 361 /* Write data */ 362 0x8000051536750004ULL, 0x80000515367500E4ULL, 363 /* Set address */ 364 0x80010515003F0000ULL, 0x80010515003F00E0ULL, 365 /* Write data */ 366 0x80010515003F0004ULL, 0x80010515003F00E4ULL, 367 /* Set address */ 368 0x801205150D440000ULL, 0x801205150D4400E0ULL, 369 /* Write data */ 370 0x801205150D440004ULL, 0x801205150D4400E4ULL, 371 /* Set address */ 372 0x80020515F2100000ULL, 0x80020515F21000E0ULL, 373 /* Write data */ 374 0x80020515F2100004ULL, 0x80020515F21000E4ULL, 375 /* Done */ 376 END_SIGN 377 }; 378 379 static const u64 xena_dtx_cfg[] = { 380 /* Set address */ 381 0x8000051500000000ULL, 0x80000515000000E0ULL, 382 /* Write data */ 383 0x80000515D9350004ULL, 0x80000515D93500E4ULL, 384 /* Set address */ 385 0x8001051500000000ULL, 0x80010515000000E0ULL, 386 /* Write data */ 387 0x80010515001E0004ULL, 0x80010515001E00E4ULL, 388 /* Set address */ 389 0x8002051500000000ULL, 0x80020515000000E0ULL, 390 /* Write data */ 391 0x80020515F2100004ULL, 0x80020515F21000E4ULL, 392 END_SIGN 393 }; 394 395 /* 396 * Constants for Fixing the MacAddress problem seen mostly on 397 * Alpha machines. 398 */ 399 static const u64 fix_mac[] = { 400 0x0060000000000000ULL, 0x0060600000000000ULL, 401 0x0040600000000000ULL, 0x0000600000000000ULL, 402 0x0020600000000000ULL, 0x0060600000000000ULL, 403 0x0020600000000000ULL, 0x0060600000000000ULL, 404 0x0020600000000000ULL, 0x0060600000000000ULL, 405 0x0020600000000000ULL, 0x0060600000000000ULL, 406 0x0020600000000000ULL, 0x0060600000000000ULL, 407 0x0020600000000000ULL, 0x0060600000000000ULL, 408 0x0020600000000000ULL, 0x0060600000000000ULL, 409 0x0020600000000000ULL, 0x0060600000000000ULL, 410 0x0020600000000000ULL, 0x0060600000000000ULL, 411 0x0020600000000000ULL, 0x0060600000000000ULL, 412 0x0020600000000000ULL, 0x0000600000000000ULL, 413 0x0040600000000000ULL, 0x0060600000000000ULL, 414 END_SIGN 415 }; 416 417 MODULE_LICENSE("GPL"); 418 MODULE_VERSION(DRV_VERSION); 419 420 421 /* Module Loadable parameters. */ 422 S2IO_PARM_INT(tx_fifo_num, FIFO_DEFAULT_NUM); 423 S2IO_PARM_INT(rx_ring_num, 1); 424 S2IO_PARM_INT(multiq, 0); 425 S2IO_PARM_INT(rx_ring_mode, 1); 426 S2IO_PARM_INT(use_continuous_tx_intrs, 1); 427 S2IO_PARM_INT(rmac_pause_time, 0x100); 428 S2IO_PARM_INT(mc_pause_threshold_q0q3, 187); 429 S2IO_PARM_INT(mc_pause_threshold_q4q7, 187); 430 S2IO_PARM_INT(shared_splits, 0); 431 S2IO_PARM_INT(tmac_util_period, 5); 432 S2IO_PARM_INT(rmac_util_period, 5); 433 S2IO_PARM_INT(l3l4hdr_size, 128); 434 /* 0 is no steering, 1 is Priority steering, 2 is Default steering */ 435 S2IO_PARM_INT(tx_steering_type, TX_DEFAULT_STEERING); 436 /* Frequency of Rx desc syncs expressed as power of 2 */ 437 S2IO_PARM_INT(rxsync_frequency, 3); 438 /* Interrupt type. Values can be 0(INTA), 2(MSI_X) */ 439 S2IO_PARM_INT(intr_type, 2); 440 /* Large receive offload feature */ 441 442 /* Max pkts to be aggregated by LRO at one time. If not specified, 443 * aggregation happens until we hit max IP pkt size(64K) 444 */ 445 S2IO_PARM_INT(lro_max_pkts, 0xFFFF); 446 S2IO_PARM_INT(indicate_max_pkts, 0); 447 448 S2IO_PARM_INT(napi, 1); 449 S2IO_PARM_INT(vlan_tag_strip, NO_STRIP_IN_PROMISC); 450 451 static unsigned int tx_fifo_len[MAX_TX_FIFOS] = 452 {DEFAULT_FIFO_0_LEN, [1 ...(MAX_TX_FIFOS - 1)] = DEFAULT_FIFO_1_7_LEN}; 453 static unsigned int rx_ring_sz[MAX_RX_RINGS] = 454 {[0 ...(MAX_RX_RINGS - 1)] = SMALL_BLK_CNT}; 455 static unsigned int rts_frm_len[MAX_RX_RINGS] = 456 {[0 ...(MAX_RX_RINGS - 1)] = 0 }; 457 458 module_param_array(tx_fifo_len, uint, NULL, 0); 459 module_param_array(rx_ring_sz, uint, NULL, 0); 460 module_param_array(rts_frm_len, uint, NULL, 0); 461 462 /* 463 * S2IO device table. 464 * This table lists all the devices that this driver supports. 465 */ 466 static const struct pci_device_id s2io_tbl[] = { 467 {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_WIN, 468 PCI_ANY_ID, PCI_ANY_ID}, 469 {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_UNI, 470 PCI_ANY_ID, PCI_ANY_ID}, 471 {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_WIN, 472 PCI_ANY_ID, PCI_ANY_ID}, 473 {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_UNI, 474 PCI_ANY_ID, PCI_ANY_ID}, 475 {0,} 476 }; 477 478 MODULE_DEVICE_TABLE(pci, s2io_tbl); 479 480 static const struct pci_error_handlers s2io_err_handler = { 481 .error_detected = s2io_io_error_detected, 482 .slot_reset = s2io_io_slot_reset, 483 .resume = s2io_io_resume, 484 }; 485 486 static struct pci_driver s2io_driver = { 487 .name = "S2IO", 488 .id_table = s2io_tbl, 489 .probe = s2io_init_nic, 490 .remove = s2io_rem_nic, 491 .err_handler = &s2io_err_handler, 492 }; 493 494 /* A simplifier macro used both by init and free shared_mem Fns(). */ 495 #define TXD_MEM_PAGE_CNT(len, per_each) DIV_ROUND_UP(len, per_each) 496 497 /* netqueue manipulation helper functions */ 498 static inline void s2io_stop_all_tx_queue(struct s2io_nic *sp) 499 { 500 if (!sp->config.multiq) { 501 int i; 502 503 for (i = 0; i < sp->config.tx_fifo_num; i++) 504 sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_STOP; 505 } 506 netif_tx_stop_all_queues(sp->dev); 507 } 508 509 static inline void s2io_stop_tx_queue(struct s2io_nic *sp, int fifo_no) 510 { 511 if (!sp->config.multiq) 512 sp->mac_control.fifos[fifo_no].queue_state = 513 FIFO_QUEUE_STOP; 514 515 netif_tx_stop_all_queues(sp->dev); 516 } 517 518 static inline void s2io_start_all_tx_queue(struct s2io_nic *sp) 519 { 520 if (!sp->config.multiq) { 521 int i; 522 523 for (i = 0; i < sp->config.tx_fifo_num; i++) 524 sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START; 525 } 526 netif_tx_start_all_queues(sp->dev); 527 } 528 529 static inline void s2io_wake_all_tx_queue(struct s2io_nic *sp) 530 { 531 if (!sp->config.multiq) { 532 int i; 533 534 for (i = 0; i < sp->config.tx_fifo_num; i++) 535 sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START; 536 } 537 netif_tx_wake_all_queues(sp->dev); 538 } 539 540 static inline void s2io_wake_tx_queue( 541 struct fifo_info *fifo, int cnt, u8 multiq) 542 { 543 544 if (multiq) { 545 if (cnt && __netif_subqueue_stopped(fifo->dev, fifo->fifo_no)) 546 netif_wake_subqueue(fifo->dev, fifo->fifo_no); 547 } else if (cnt && (fifo->queue_state == FIFO_QUEUE_STOP)) { 548 if (netif_queue_stopped(fifo->dev)) { 549 fifo->queue_state = FIFO_QUEUE_START; 550 netif_wake_queue(fifo->dev); 551 } 552 } 553 } 554 555 /** 556 * init_shared_mem - Allocation and Initialization of Memory 557 * @nic: Device private variable. 558 * Description: The function allocates all the memory areas shared 559 * between the NIC and the driver. This includes Tx descriptors, 560 * Rx descriptors and the statistics block. 561 */ 562 563 static int init_shared_mem(struct s2io_nic *nic) 564 { 565 u32 size; 566 void *tmp_v_addr, *tmp_v_addr_next; 567 dma_addr_t tmp_p_addr, tmp_p_addr_next; 568 struct RxD_block *pre_rxd_blk = NULL; 569 int i, j, blk_cnt; 570 int lst_size, lst_per_page; 571 struct net_device *dev = nic->dev; 572 unsigned long tmp; 573 struct buffAdd *ba; 574 struct config_param *config = &nic->config; 575 struct mac_info *mac_control = &nic->mac_control; 576 unsigned long long mem_allocated = 0; 577 578 /* Allocation and initialization of TXDLs in FIFOs */ 579 size = 0; 580 for (i = 0; i < config->tx_fifo_num; i++) { 581 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i]; 582 583 size += tx_cfg->fifo_len; 584 } 585 if (size > MAX_AVAILABLE_TXDS) { 586 DBG_PRINT(ERR_DBG, 587 "Too many TxDs requested: %d, max supported: %d\n", 588 size, MAX_AVAILABLE_TXDS); 589 return -EINVAL; 590 } 591 592 size = 0; 593 for (i = 0; i < config->tx_fifo_num; i++) { 594 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i]; 595 596 size = tx_cfg->fifo_len; 597 /* 598 * Legal values are from 2 to 8192 599 */ 600 if (size < 2) { 601 DBG_PRINT(ERR_DBG, "Fifo %d: Invalid length (%d) - " 602 "Valid lengths are 2 through 8192\n", 603 i, size); 604 return -EINVAL; 605 } 606 } 607 608 lst_size = (sizeof(struct TxD) * config->max_txds); 609 lst_per_page = PAGE_SIZE / lst_size; 610 611 for (i = 0; i < config->tx_fifo_num; i++) { 612 struct fifo_info *fifo = &mac_control->fifos[i]; 613 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i]; 614 int fifo_len = tx_cfg->fifo_len; 615 int list_holder_size = fifo_len * sizeof(struct list_info_hold); 616 617 fifo->list_info = kzalloc(list_holder_size, GFP_KERNEL); 618 if (!fifo->list_info) { 619 DBG_PRINT(INFO_DBG, "Malloc failed for list_info\n"); 620 return -ENOMEM; 621 } 622 mem_allocated += list_holder_size; 623 } 624 for (i = 0; i < config->tx_fifo_num; i++) { 625 int page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len, 626 lst_per_page); 627 struct fifo_info *fifo = &mac_control->fifos[i]; 628 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i]; 629 630 fifo->tx_curr_put_info.offset = 0; 631 fifo->tx_curr_put_info.fifo_len = tx_cfg->fifo_len - 1; 632 fifo->tx_curr_get_info.offset = 0; 633 fifo->tx_curr_get_info.fifo_len = tx_cfg->fifo_len - 1; 634 fifo->fifo_no = i; 635 fifo->nic = nic; 636 fifo->max_txds = MAX_SKB_FRAGS + 2; 637 fifo->dev = dev; 638 639 for (j = 0; j < page_num; j++) { 640 int k = 0; 641 dma_addr_t tmp_p; 642 void *tmp_v; 643 tmp_v = pci_alloc_consistent(nic->pdev, 644 PAGE_SIZE, &tmp_p); 645 if (!tmp_v) { 646 DBG_PRINT(INFO_DBG, 647 "pci_alloc_consistent failed for TxDL\n"); 648 return -ENOMEM; 649 } 650 /* If we got a zero DMA address(can happen on 651 * certain platforms like PPC), reallocate. 652 * Store virtual address of page we don't want, 653 * to be freed later. 654 */ 655 if (!tmp_p) { 656 mac_control->zerodma_virt_addr = tmp_v; 657 DBG_PRINT(INIT_DBG, 658 "%s: Zero DMA address for TxDL. " 659 "Virtual address %p\n", 660 dev->name, tmp_v); 661 tmp_v = pci_alloc_consistent(nic->pdev, 662 PAGE_SIZE, &tmp_p); 663 if (!tmp_v) { 664 DBG_PRINT(INFO_DBG, 665 "pci_alloc_consistent failed for TxDL\n"); 666 return -ENOMEM; 667 } 668 mem_allocated += PAGE_SIZE; 669 } 670 while (k < lst_per_page) { 671 int l = (j * lst_per_page) + k; 672 if (l == tx_cfg->fifo_len) 673 break; 674 fifo->list_info[l].list_virt_addr = 675 tmp_v + (k * lst_size); 676 fifo->list_info[l].list_phy_addr = 677 tmp_p + (k * lst_size); 678 k++; 679 } 680 } 681 } 682 683 for (i = 0; i < config->tx_fifo_num; i++) { 684 struct fifo_info *fifo = &mac_control->fifos[i]; 685 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i]; 686 687 size = tx_cfg->fifo_len; 688 fifo->ufo_in_band_v = kcalloc(size, sizeof(u64), GFP_KERNEL); 689 if (!fifo->ufo_in_band_v) 690 return -ENOMEM; 691 mem_allocated += (size * sizeof(u64)); 692 } 693 694 /* Allocation and initialization of RXDs in Rings */ 695 size = 0; 696 for (i = 0; i < config->rx_ring_num; i++) { 697 struct rx_ring_config *rx_cfg = &config->rx_cfg[i]; 698 struct ring_info *ring = &mac_control->rings[i]; 699 700 if (rx_cfg->num_rxd % (rxd_count[nic->rxd_mode] + 1)) { 701 DBG_PRINT(ERR_DBG, "%s: Ring%d RxD count is not a " 702 "multiple of RxDs per Block\n", 703 dev->name, i); 704 return FAILURE; 705 } 706 size += rx_cfg->num_rxd; 707 ring->block_count = rx_cfg->num_rxd / 708 (rxd_count[nic->rxd_mode] + 1); 709 ring->pkt_cnt = rx_cfg->num_rxd - ring->block_count; 710 } 711 if (nic->rxd_mode == RXD_MODE_1) 712 size = (size * (sizeof(struct RxD1))); 713 else 714 size = (size * (sizeof(struct RxD3))); 715 716 for (i = 0; i < config->rx_ring_num; i++) { 717 struct rx_ring_config *rx_cfg = &config->rx_cfg[i]; 718 struct ring_info *ring = &mac_control->rings[i]; 719 720 ring->rx_curr_get_info.block_index = 0; 721 ring->rx_curr_get_info.offset = 0; 722 ring->rx_curr_get_info.ring_len = rx_cfg->num_rxd - 1; 723 ring->rx_curr_put_info.block_index = 0; 724 ring->rx_curr_put_info.offset = 0; 725 ring->rx_curr_put_info.ring_len = rx_cfg->num_rxd - 1; 726 ring->nic = nic; 727 ring->ring_no = i; 728 729 blk_cnt = rx_cfg->num_rxd / (rxd_count[nic->rxd_mode] + 1); 730 /* Allocating all the Rx blocks */ 731 for (j = 0; j < blk_cnt; j++) { 732 struct rx_block_info *rx_blocks; 733 int l; 734 735 rx_blocks = &ring->rx_blocks[j]; 736 size = SIZE_OF_BLOCK; /* size is always page size */ 737 tmp_v_addr = pci_alloc_consistent(nic->pdev, size, 738 &tmp_p_addr); 739 if (tmp_v_addr == NULL) { 740 /* 741 * In case of failure, free_shared_mem() 742 * is called, which should free any 743 * memory that was alloced till the 744 * failure happened. 745 */ 746 rx_blocks->block_virt_addr = tmp_v_addr; 747 return -ENOMEM; 748 } 749 mem_allocated += size; 750 memset(tmp_v_addr, 0, size); 751 752 size = sizeof(struct rxd_info) * 753 rxd_count[nic->rxd_mode]; 754 rx_blocks->block_virt_addr = tmp_v_addr; 755 rx_blocks->block_dma_addr = tmp_p_addr; 756 rx_blocks->rxds = kmalloc(size, GFP_KERNEL); 757 if (!rx_blocks->rxds) 758 return -ENOMEM; 759 mem_allocated += size; 760 for (l = 0; l < rxd_count[nic->rxd_mode]; l++) { 761 rx_blocks->rxds[l].virt_addr = 762 rx_blocks->block_virt_addr + 763 (rxd_size[nic->rxd_mode] * l); 764 rx_blocks->rxds[l].dma_addr = 765 rx_blocks->block_dma_addr + 766 (rxd_size[nic->rxd_mode] * l); 767 } 768 } 769 /* Interlinking all Rx Blocks */ 770 for (j = 0; j < blk_cnt; j++) { 771 int next = (j + 1) % blk_cnt; 772 tmp_v_addr = ring->rx_blocks[j].block_virt_addr; 773 tmp_v_addr_next = ring->rx_blocks[next].block_virt_addr; 774 tmp_p_addr = ring->rx_blocks[j].block_dma_addr; 775 tmp_p_addr_next = ring->rx_blocks[next].block_dma_addr; 776 777 pre_rxd_blk = tmp_v_addr; 778 pre_rxd_blk->reserved_2_pNext_RxD_block = 779 (unsigned long)tmp_v_addr_next; 780 pre_rxd_blk->pNext_RxD_Blk_physical = 781 (u64)tmp_p_addr_next; 782 } 783 } 784 if (nic->rxd_mode == RXD_MODE_3B) { 785 /* 786 * Allocation of Storages for buffer addresses in 2BUFF mode 787 * and the buffers as well. 788 */ 789 for (i = 0; i < config->rx_ring_num; i++) { 790 struct rx_ring_config *rx_cfg = &config->rx_cfg[i]; 791 struct ring_info *ring = &mac_control->rings[i]; 792 793 blk_cnt = rx_cfg->num_rxd / 794 (rxd_count[nic->rxd_mode] + 1); 795 size = sizeof(struct buffAdd *) * blk_cnt; 796 ring->ba = kmalloc(size, GFP_KERNEL); 797 if (!ring->ba) 798 return -ENOMEM; 799 mem_allocated += size; 800 for (j = 0; j < blk_cnt; j++) { 801 int k = 0; 802 803 size = sizeof(struct buffAdd) * 804 (rxd_count[nic->rxd_mode] + 1); 805 ring->ba[j] = kmalloc(size, GFP_KERNEL); 806 if (!ring->ba[j]) 807 return -ENOMEM; 808 mem_allocated += size; 809 while (k != rxd_count[nic->rxd_mode]) { 810 ba = &ring->ba[j][k]; 811 size = BUF0_LEN + ALIGN_SIZE; 812 ba->ba_0_org = kmalloc(size, GFP_KERNEL); 813 if (!ba->ba_0_org) 814 return -ENOMEM; 815 mem_allocated += size; 816 tmp = (unsigned long)ba->ba_0_org; 817 tmp += ALIGN_SIZE; 818 tmp &= ~((unsigned long)ALIGN_SIZE); 819 ba->ba_0 = (void *)tmp; 820 821 size = BUF1_LEN + ALIGN_SIZE; 822 ba->ba_1_org = kmalloc(size, GFP_KERNEL); 823 if (!ba->ba_1_org) 824 return -ENOMEM; 825 mem_allocated += size; 826 tmp = (unsigned long)ba->ba_1_org; 827 tmp += ALIGN_SIZE; 828 tmp &= ~((unsigned long)ALIGN_SIZE); 829 ba->ba_1 = (void *)tmp; 830 k++; 831 } 832 } 833 } 834 } 835 836 /* Allocation and initialization of Statistics block */ 837 size = sizeof(struct stat_block); 838 mac_control->stats_mem = 839 pci_alloc_consistent(nic->pdev, size, 840 &mac_control->stats_mem_phy); 841 842 if (!mac_control->stats_mem) { 843 /* 844 * In case of failure, free_shared_mem() is called, which 845 * should free any memory that was alloced till the 846 * failure happened. 847 */ 848 return -ENOMEM; 849 } 850 mem_allocated += size; 851 mac_control->stats_mem_sz = size; 852 853 tmp_v_addr = mac_control->stats_mem; 854 mac_control->stats_info = tmp_v_addr; 855 memset(tmp_v_addr, 0, size); 856 DBG_PRINT(INIT_DBG, "%s: Ring Mem PHY: 0x%llx\n", 857 dev_name(&nic->pdev->dev), (unsigned long long)tmp_p_addr); 858 mac_control->stats_info->sw_stat.mem_allocated += mem_allocated; 859 return SUCCESS; 860 } 861 862 /** 863 * free_shared_mem - Free the allocated Memory 864 * @nic: Device private variable. 865 * Description: This function is to free all memory locations allocated by 866 * the init_shared_mem() function and return it to the kernel. 867 */ 868 869 static void free_shared_mem(struct s2io_nic *nic) 870 { 871 int i, j, blk_cnt, size; 872 void *tmp_v_addr; 873 dma_addr_t tmp_p_addr; 874 int lst_size, lst_per_page; 875 struct net_device *dev; 876 int page_num = 0; 877 struct config_param *config; 878 struct mac_info *mac_control; 879 struct stat_block *stats; 880 struct swStat *swstats; 881 882 if (!nic) 883 return; 884 885 dev = nic->dev; 886 887 config = &nic->config; 888 mac_control = &nic->mac_control; 889 stats = mac_control->stats_info; 890 swstats = &stats->sw_stat; 891 892 lst_size = sizeof(struct TxD) * config->max_txds; 893 lst_per_page = PAGE_SIZE / lst_size; 894 895 for (i = 0; i < config->tx_fifo_num; i++) { 896 struct fifo_info *fifo = &mac_control->fifos[i]; 897 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i]; 898 899 page_num = TXD_MEM_PAGE_CNT(tx_cfg->fifo_len, lst_per_page); 900 for (j = 0; j < page_num; j++) { 901 int mem_blks = (j * lst_per_page); 902 struct list_info_hold *fli; 903 904 if (!fifo->list_info) 905 return; 906 907 fli = &fifo->list_info[mem_blks]; 908 if (!fli->list_virt_addr) 909 break; 910 pci_free_consistent(nic->pdev, PAGE_SIZE, 911 fli->list_virt_addr, 912 fli->list_phy_addr); 913 swstats->mem_freed += PAGE_SIZE; 914 } 915 /* If we got a zero DMA address during allocation, 916 * free the page now 917 */ 918 if (mac_control->zerodma_virt_addr) { 919 pci_free_consistent(nic->pdev, PAGE_SIZE, 920 mac_control->zerodma_virt_addr, 921 (dma_addr_t)0); 922 DBG_PRINT(INIT_DBG, 923 "%s: Freeing TxDL with zero DMA address. " 924 "Virtual address %p\n", 925 dev->name, mac_control->zerodma_virt_addr); 926 swstats->mem_freed += PAGE_SIZE; 927 } 928 kfree(fifo->list_info); 929 swstats->mem_freed += tx_cfg->fifo_len * 930 sizeof(struct list_info_hold); 931 } 932 933 size = SIZE_OF_BLOCK; 934 for (i = 0; i < config->rx_ring_num; i++) { 935 struct ring_info *ring = &mac_control->rings[i]; 936 937 blk_cnt = ring->block_count; 938 for (j = 0; j < blk_cnt; j++) { 939 tmp_v_addr = ring->rx_blocks[j].block_virt_addr; 940 tmp_p_addr = ring->rx_blocks[j].block_dma_addr; 941 if (tmp_v_addr == NULL) 942 break; 943 pci_free_consistent(nic->pdev, size, 944 tmp_v_addr, tmp_p_addr); 945 swstats->mem_freed += size; 946 kfree(ring->rx_blocks[j].rxds); 947 swstats->mem_freed += sizeof(struct rxd_info) * 948 rxd_count[nic->rxd_mode]; 949 } 950 } 951 952 if (nic->rxd_mode == RXD_MODE_3B) { 953 /* Freeing buffer storage addresses in 2BUFF mode. */ 954 for (i = 0; i < config->rx_ring_num; i++) { 955 struct rx_ring_config *rx_cfg = &config->rx_cfg[i]; 956 struct ring_info *ring = &mac_control->rings[i]; 957 958 blk_cnt = rx_cfg->num_rxd / 959 (rxd_count[nic->rxd_mode] + 1); 960 for (j = 0; j < blk_cnt; j++) { 961 int k = 0; 962 if (!ring->ba[j]) 963 continue; 964 while (k != rxd_count[nic->rxd_mode]) { 965 struct buffAdd *ba = &ring->ba[j][k]; 966 kfree(ba->ba_0_org); 967 swstats->mem_freed += 968 BUF0_LEN + ALIGN_SIZE; 969 kfree(ba->ba_1_org); 970 swstats->mem_freed += 971 BUF1_LEN + ALIGN_SIZE; 972 k++; 973 } 974 kfree(ring->ba[j]); 975 swstats->mem_freed += sizeof(struct buffAdd) * 976 (rxd_count[nic->rxd_mode] + 1); 977 } 978 kfree(ring->ba); 979 swstats->mem_freed += sizeof(struct buffAdd *) * 980 blk_cnt; 981 } 982 } 983 984 for (i = 0; i < nic->config.tx_fifo_num; i++) { 985 struct fifo_info *fifo = &mac_control->fifos[i]; 986 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i]; 987 988 if (fifo->ufo_in_band_v) { 989 swstats->mem_freed += tx_cfg->fifo_len * 990 sizeof(u64); 991 kfree(fifo->ufo_in_band_v); 992 } 993 } 994 995 if (mac_control->stats_mem) { 996 swstats->mem_freed += mac_control->stats_mem_sz; 997 pci_free_consistent(nic->pdev, 998 mac_control->stats_mem_sz, 999 mac_control->stats_mem, 1000 mac_control->stats_mem_phy); 1001 } 1002 } 1003 1004 /** 1005 * s2io_verify_pci_mode - 1006 */ 1007 1008 static int s2io_verify_pci_mode(struct s2io_nic *nic) 1009 { 1010 struct XENA_dev_config __iomem *bar0 = nic->bar0; 1011 register u64 val64 = 0; 1012 int mode; 1013 1014 val64 = readq(&bar0->pci_mode); 1015 mode = (u8)GET_PCI_MODE(val64); 1016 1017 if (val64 & PCI_MODE_UNKNOWN_MODE) 1018 return -1; /* Unknown PCI mode */ 1019 return mode; 1020 } 1021 1022 #define NEC_VENID 0x1033 1023 #define NEC_DEVID 0x0125 1024 static int s2io_on_nec_bridge(struct pci_dev *s2io_pdev) 1025 { 1026 struct pci_dev *tdev = NULL; 1027 for_each_pci_dev(tdev) { 1028 if (tdev->vendor == NEC_VENID && tdev->device == NEC_DEVID) { 1029 if (tdev->bus == s2io_pdev->bus->parent) { 1030 pci_dev_put(tdev); 1031 return 1; 1032 } 1033 } 1034 } 1035 return 0; 1036 } 1037 1038 static int bus_speed[8] = {33, 133, 133, 200, 266, 133, 200, 266}; 1039 /** 1040 * s2io_print_pci_mode - 1041 */ 1042 static int s2io_print_pci_mode(struct s2io_nic *nic) 1043 { 1044 struct XENA_dev_config __iomem *bar0 = nic->bar0; 1045 register u64 val64 = 0; 1046 int mode; 1047 struct config_param *config = &nic->config; 1048 const char *pcimode; 1049 1050 val64 = readq(&bar0->pci_mode); 1051 mode = (u8)GET_PCI_MODE(val64); 1052 1053 if (val64 & PCI_MODE_UNKNOWN_MODE) 1054 return -1; /* Unknown PCI mode */ 1055 1056 config->bus_speed = bus_speed[mode]; 1057 1058 if (s2io_on_nec_bridge(nic->pdev)) { 1059 DBG_PRINT(ERR_DBG, "%s: Device is on PCI-E bus\n", 1060 nic->dev->name); 1061 return mode; 1062 } 1063 1064 switch (mode) { 1065 case PCI_MODE_PCI_33: 1066 pcimode = "33MHz PCI bus"; 1067 break; 1068 case PCI_MODE_PCI_66: 1069 pcimode = "66MHz PCI bus"; 1070 break; 1071 case PCI_MODE_PCIX_M1_66: 1072 pcimode = "66MHz PCIX(M1) bus"; 1073 break; 1074 case PCI_MODE_PCIX_M1_100: 1075 pcimode = "100MHz PCIX(M1) bus"; 1076 break; 1077 case PCI_MODE_PCIX_M1_133: 1078 pcimode = "133MHz PCIX(M1) bus"; 1079 break; 1080 case PCI_MODE_PCIX_M2_66: 1081 pcimode = "133MHz PCIX(M2) bus"; 1082 break; 1083 case PCI_MODE_PCIX_M2_100: 1084 pcimode = "200MHz PCIX(M2) bus"; 1085 break; 1086 case PCI_MODE_PCIX_M2_133: 1087 pcimode = "266MHz PCIX(M2) bus"; 1088 break; 1089 default: 1090 pcimode = "unsupported bus!"; 1091 mode = -1; 1092 } 1093 1094 DBG_PRINT(ERR_DBG, "%s: Device is on %d bit %s\n", 1095 nic->dev->name, val64 & PCI_MODE_32_BITS ? 32 : 64, pcimode); 1096 1097 return mode; 1098 } 1099 1100 /** 1101 * init_tti - Initialization transmit traffic interrupt scheme 1102 * @nic: device private variable 1103 * @link: link status (UP/DOWN) used to enable/disable continuous 1104 * transmit interrupts 1105 * Description: The function configures transmit traffic interrupts 1106 * Return Value: SUCCESS on success and 1107 * '-1' on failure 1108 */ 1109 1110 static int init_tti(struct s2io_nic *nic, int link) 1111 { 1112 struct XENA_dev_config __iomem *bar0 = nic->bar0; 1113 register u64 val64 = 0; 1114 int i; 1115 struct config_param *config = &nic->config; 1116 1117 for (i = 0; i < config->tx_fifo_num; i++) { 1118 /* 1119 * TTI Initialization. Default Tx timer gets us about 1120 * 250 interrupts per sec. Continuous interrupts are enabled 1121 * by default. 1122 */ 1123 if (nic->device_type == XFRAME_II_DEVICE) { 1124 int count = (nic->config.bus_speed * 125)/2; 1125 val64 = TTI_DATA1_MEM_TX_TIMER_VAL(count); 1126 } else 1127 val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078); 1128 1129 val64 |= TTI_DATA1_MEM_TX_URNG_A(0xA) | 1130 TTI_DATA1_MEM_TX_URNG_B(0x10) | 1131 TTI_DATA1_MEM_TX_URNG_C(0x30) | 1132 TTI_DATA1_MEM_TX_TIMER_AC_EN; 1133 if (i == 0) 1134 if (use_continuous_tx_intrs && (link == LINK_UP)) 1135 val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN; 1136 writeq(val64, &bar0->tti_data1_mem); 1137 1138 if (nic->config.intr_type == MSI_X) { 1139 val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) | 1140 TTI_DATA2_MEM_TX_UFC_B(0x100) | 1141 TTI_DATA2_MEM_TX_UFC_C(0x200) | 1142 TTI_DATA2_MEM_TX_UFC_D(0x300); 1143 } else { 1144 if ((nic->config.tx_steering_type == 1145 TX_DEFAULT_STEERING) && 1146 (config->tx_fifo_num > 1) && 1147 (i >= nic->udp_fifo_idx) && 1148 (i < (nic->udp_fifo_idx + 1149 nic->total_udp_fifos))) 1150 val64 = TTI_DATA2_MEM_TX_UFC_A(0x50) | 1151 TTI_DATA2_MEM_TX_UFC_B(0x80) | 1152 TTI_DATA2_MEM_TX_UFC_C(0x100) | 1153 TTI_DATA2_MEM_TX_UFC_D(0x120); 1154 else 1155 val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) | 1156 TTI_DATA2_MEM_TX_UFC_B(0x20) | 1157 TTI_DATA2_MEM_TX_UFC_C(0x40) | 1158 TTI_DATA2_MEM_TX_UFC_D(0x80); 1159 } 1160 1161 writeq(val64, &bar0->tti_data2_mem); 1162 1163 val64 = TTI_CMD_MEM_WE | 1164 TTI_CMD_MEM_STROBE_NEW_CMD | 1165 TTI_CMD_MEM_OFFSET(i); 1166 writeq(val64, &bar0->tti_command_mem); 1167 1168 if (wait_for_cmd_complete(&bar0->tti_command_mem, 1169 TTI_CMD_MEM_STROBE_NEW_CMD, 1170 S2IO_BIT_RESET) != SUCCESS) 1171 return FAILURE; 1172 } 1173 1174 return SUCCESS; 1175 } 1176 1177 /** 1178 * init_nic - Initialization of hardware 1179 * @nic: device private variable 1180 * Description: The function sequentially configures every block 1181 * of the H/W from their reset values. 1182 * Return Value: SUCCESS on success and 1183 * '-1' on failure (endian settings incorrect). 1184 */ 1185 1186 static int init_nic(struct s2io_nic *nic) 1187 { 1188 struct XENA_dev_config __iomem *bar0 = nic->bar0; 1189 struct net_device *dev = nic->dev; 1190 register u64 val64 = 0; 1191 void __iomem *add; 1192 u32 time; 1193 int i, j; 1194 int dtx_cnt = 0; 1195 unsigned long long mem_share; 1196 int mem_size; 1197 struct config_param *config = &nic->config; 1198 struct mac_info *mac_control = &nic->mac_control; 1199 1200 /* to set the swapper controle on the card */ 1201 if (s2io_set_swapper(nic)) { 1202 DBG_PRINT(ERR_DBG, "ERROR: Setting Swapper failed\n"); 1203 return -EIO; 1204 } 1205 1206 /* 1207 * Herc requires EOI to be removed from reset before XGXS, so.. 1208 */ 1209 if (nic->device_type & XFRAME_II_DEVICE) { 1210 val64 = 0xA500000000ULL; 1211 writeq(val64, &bar0->sw_reset); 1212 msleep(500); 1213 val64 = readq(&bar0->sw_reset); 1214 } 1215 1216 /* Remove XGXS from reset state */ 1217 val64 = 0; 1218 writeq(val64, &bar0->sw_reset); 1219 msleep(500); 1220 val64 = readq(&bar0->sw_reset); 1221 1222 /* Ensure that it's safe to access registers by checking 1223 * RIC_RUNNING bit is reset. Check is valid only for XframeII. 1224 */ 1225 if (nic->device_type == XFRAME_II_DEVICE) { 1226 for (i = 0; i < 50; i++) { 1227 val64 = readq(&bar0->adapter_status); 1228 if (!(val64 & ADAPTER_STATUS_RIC_RUNNING)) 1229 break; 1230 msleep(10); 1231 } 1232 if (i == 50) 1233 return -ENODEV; 1234 } 1235 1236 /* Enable Receiving broadcasts */ 1237 add = &bar0->mac_cfg; 1238 val64 = readq(&bar0->mac_cfg); 1239 val64 |= MAC_RMAC_BCAST_ENABLE; 1240 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key); 1241 writel((u32)val64, add); 1242 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key); 1243 writel((u32) (val64 >> 32), (add + 4)); 1244 1245 /* Read registers in all blocks */ 1246 val64 = readq(&bar0->mac_int_mask); 1247 val64 = readq(&bar0->mc_int_mask); 1248 val64 = readq(&bar0->xgxs_int_mask); 1249 1250 /* Set MTU */ 1251 val64 = dev->mtu; 1252 writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len); 1253 1254 if (nic->device_type & XFRAME_II_DEVICE) { 1255 while (herc_act_dtx_cfg[dtx_cnt] != END_SIGN) { 1256 SPECIAL_REG_WRITE(herc_act_dtx_cfg[dtx_cnt], 1257 &bar0->dtx_control, UF); 1258 if (dtx_cnt & 0x1) 1259 msleep(1); /* Necessary!! */ 1260 dtx_cnt++; 1261 } 1262 } else { 1263 while (xena_dtx_cfg[dtx_cnt] != END_SIGN) { 1264 SPECIAL_REG_WRITE(xena_dtx_cfg[dtx_cnt], 1265 &bar0->dtx_control, UF); 1266 val64 = readq(&bar0->dtx_control); 1267 dtx_cnt++; 1268 } 1269 } 1270 1271 /* Tx DMA Initialization */ 1272 val64 = 0; 1273 writeq(val64, &bar0->tx_fifo_partition_0); 1274 writeq(val64, &bar0->tx_fifo_partition_1); 1275 writeq(val64, &bar0->tx_fifo_partition_2); 1276 writeq(val64, &bar0->tx_fifo_partition_3); 1277 1278 for (i = 0, j = 0; i < config->tx_fifo_num; i++) { 1279 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i]; 1280 1281 val64 |= vBIT(tx_cfg->fifo_len - 1, ((j * 32) + 19), 13) | 1282 vBIT(tx_cfg->fifo_priority, ((j * 32) + 5), 3); 1283 1284 if (i == (config->tx_fifo_num - 1)) { 1285 if (i % 2 == 0) 1286 i++; 1287 } 1288 1289 switch (i) { 1290 case 1: 1291 writeq(val64, &bar0->tx_fifo_partition_0); 1292 val64 = 0; 1293 j = 0; 1294 break; 1295 case 3: 1296 writeq(val64, &bar0->tx_fifo_partition_1); 1297 val64 = 0; 1298 j = 0; 1299 break; 1300 case 5: 1301 writeq(val64, &bar0->tx_fifo_partition_2); 1302 val64 = 0; 1303 j = 0; 1304 break; 1305 case 7: 1306 writeq(val64, &bar0->tx_fifo_partition_3); 1307 val64 = 0; 1308 j = 0; 1309 break; 1310 default: 1311 j++; 1312 break; 1313 } 1314 } 1315 1316 /* 1317 * Disable 4 PCCs for Xena1, 2 and 3 as per H/W bug 1318 * SXE-008 TRANSMIT DMA ARBITRATION ISSUE. 1319 */ 1320 if ((nic->device_type == XFRAME_I_DEVICE) && (nic->pdev->revision < 4)) 1321 writeq(PCC_ENABLE_FOUR, &bar0->pcc_enable); 1322 1323 val64 = readq(&bar0->tx_fifo_partition_0); 1324 DBG_PRINT(INIT_DBG, "Fifo partition at: 0x%p is: 0x%llx\n", 1325 &bar0->tx_fifo_partition_0, (unsigned long long)val64); 1326 1327 /* 1328 * Initialization of Tx_PA_CONFIG register to ignore packet 1329 * integrity checking. 1330 */ 1331 val64 = readq(&bar0->tx_pa_cfg); 1332 val64 |= TX_PA_CFG_IGNORE_FRM_ERR | 1333 TX_PA_CFG_IGNORE_SNAP_OUI | 1334 TX_PA_CFG_IGNORE_LLC_CTRL | 1335 TX_PA_CFG_IGNORE_L2_ERR; 1336 writeq(val64, &bar0->tx_pa_cfg); 1337 1338 /* Rx DMA initialization. */ 1339 val64 = 0; 1340 for (i = 0; i < config->rx_ring_num; i++) { 1341 struct rx_ring_config *rx_cfg = &config->rx_cfg[i]; 1342 1343 val64 |= vBIT(rx_cfg->ring_priority, (5 + (i * 8)), 3); 1344 } 1345 writeq(val64, &bar0->rx_queue_priority); 1346 1347 /* 1348 * Allocating equal share of memory to all the 1349 * configured Rings. 1350 */ 1351 val64 = 0; 1352 if (nic->device_type & XFRAME_II_DEVICE) 1353 mem_size = 32; 1354 else 1355 mem_size = 64; 1356 1357 for (i = 0; i < config->rx_ring_num; i++) { 1358 switch (i) { 1359 case 0: 1360 mem_share = (mem_size / config->rx_ring_num + 1361 mem_size % config->rx_ring_num); 1362 val64 |= RX_QUEUE_CFG_Q0_SZ(mem_share); 1363 continue; 1364 case 1: 1365 mem_share = (mem_size / config->rx_ring_num); 1366 val64 |= RX_QUEUE_CFG_Q1_SZ(mem_share); 1367 continue; 1368 case 2: 1369 mem_share = (mem_size / config->rx_ring_num); 1370 val64 |= RX_QUEUE_CFG_Q2_SZ(mem_share); 1371 continue; 1372 case 3: 1373 mem_share = (mem_size / config->rx_ring_num); 1374 val64 |= RX_QUEUE_CFG_Q3_SZ(mem_share); 1375 continue; 1376 case 4: 1377 mem_share = (mem_size / config->rx_ring_num); 1378 val64 |= RX_QUEUE_CFG_Q4_SZ(mem_share); 1379 continue; 1380 case 5: 1381 mem_share = (mem_size / config->rx_ring_num); 1382 val64 |= RX_QUEUE_CFG_Q5_SZ(mem_share); 1383 continue; 1384 case 6: 1385 mem_share = (mem_size / config->rx_ring_num); 1386 val64 |= RX_QUEUE_CFG_Q6_SZ(mem_share); 1387 continue; 1388 case 7: 1389 mem_share = (mem_size / config->rx_ring_num); 1390 val64 |= RX_QUEUE_CFG_Q7_SZ(mem_share); 1391 continue; 1392 } 1393 } 1394 writeq(val64, &bar0->rx_queue_cfg); 1395 1396 /* 1397 * Filling Tx round robin registers 1398 * as per the number of FIFOs for equal scheduling priority 1399 */ 1400 switch (config->tx_fifo_num) { 1401 case 1: 1402 val64 = 0x0; 1403 writeq(val64, &bar0->tx_w_round_robin_0); 1404 writeq(val64, &bar0->tx_w_round_robin_1); 1405 writeq(val64, &bar0->tx_w_round_robin_2); 1406 writeq(val64, &bar0->tx_w_round_robin_3); 1407 writeq(val64, &bar0->tx_w_round_robin_4); 1408 break; 1409 case 2: 1410 val64 = 0x0001000100010001ULL; 1411 writeq(val64, &bar0->tx_w_round_robin_0); 1412 writeq(val64, &bar0->tx_w_round_robin_1); 1413 writeq(val64, &bar0->tx_w_round_robin_2); 1414 writeq(val64, &bar0->tx_w_round_robin_3); 1415 val64 = 0x0001000100000000ULL; 1416 writeq(val64, &bar0->tx_w_round_robin_4); 1417 break; 1418 case 3: 1419 val64 = 0x0001020001020001ULL; 1420 writeq(val64, &bar0->tx_w_round_robin_0); 1421 val64 = 0x0200010200010200ULL; 1422 writeq(val64, &bar0->tx_w_round_robin_1); 1423 val64 = 0x0102000102000102ULL; 1424 writeq(val64, &bar0->tx_w_round_robin_2); 1425 val64 = 0x0001020001020001ULL; 1426 writeq(val64, &bar0->tx_w_round_robin_3); 1427 val64 = 0x0200010200000000ULL; 1428 writeq(val64, &bar0->tx_w_round_robin_4); 1429 break; 1430 case 4: 1431 val64 = 0x0001020300010203ULL; 1432 writeq(val64, &bar0->tx_w_round_robin_0); 1433 writeq(val64, &bar0->tx_w_round_robin_1); 1434 writeq(val64, &bar0->tx_w_round_robin_2); 1435 writeq(val64, &bar0->tx_w_round_robin_3); 1436 val64 = 0x0001020300000000ULL; 1437 writeq(val64, &bar0->tx_w_round_robin_4); 1438 break; 1439 case 5: 1440 val64 = 0x0001020304000102ULL; 1441 writeq(val64, &bar0->tx_w_round_robin_0); 1442 val64 = 0x0304000102030400ULL; 1443 writeq(val64, &bar0->tx_w_round_robin_1); 1444 val64 = 0x0102030400010203ULL; 1445 writeq(val64, &bar0->tx_w_round_robin_2); 1446 val64 = 0x0400010203040001ULL; 1447 writeq(val64, &bar0->tx_w_round_robin_3); 1448 val64 = 0x0203040000000000ULL; 1449 writeq(val64, &bar0->tx_w_round_robin_4); 1450 break; 1451 case 6: 1452 val64 = 0x0001020304050001ULL; 1453 writeq(val64, &bar0->tx_w_round_robin_0); 1454 val64 = 0x0203040500010203ULL; 1455 writeq(val64, &bar0->tx_w_round_robin_1); 1456 val64 = 0x0405000102030405ULL; 1457 writeq(val64, &bar0->tx_w_round_robin_2); 1458 val64 = 0x0001020304050001ULL; 1459 writeq(val64, &bar0->tx_w_round_robin_3); 1460 val64 = 0x0203040500000000ULL; 1461 writeq(val64, &bar0->tx_w_round_robin_4); 1462 break; 1463 case 7: 1464 val64 = 0x0001020304050600ULL; 1465 writeq(val64, &bar0->tx_w_round_robin_0); 1466 val64 = 0x0102030405060001ULL; 1467 writeq(val64, &bar0->tx_w_round_robin_1); 1468 val64 = 0x0203040506000102ULL; 1469 writeq(val64, &bar0->tx_w_round_robin_2); 1470 val64 = 0x0304050600010203ULL; 1471 writeq(val64, &bar0->tx_w_round_robin_3); 1472 val64 = 0x0405060000000000ULL; 1473 writeq(val64, &bar0->tx_w_round_robin_4); 1474 break; 1475 case 8: 1476 val64 = 0x0001020304050607ULL; 1477 writeq(val64, &bar0->tx_w_round_robin_0); 1478 writeq(val64, &bar0->tx_w_round_robin_1); 1479 writeq(val64, &bar0->tx_w_round_robin_2); 1480 writeq(val64, &bar0->tx_w_round_robin_3); 1481 val64 = 0x0001020300000000ULL; 1482 writeq(val64, &bar0->tx_w_round_robin_4); 1483 break; 1484 } 1485 1486 /* Enable all configured Tx FIFO partitions */ 1487 val64 = readq(&bar0->tx_fifo_partition_0); 1488 val64 |= (TX_FIFO_PARTITION_EN); 1489 writeq(val64, &bar0->tx_fifo_partition_0); 1490 1491 /* Filling the Rx round robin registers as per the 1492 * number of Rings and steering based on QoS with 1493 * equal priority. 1494 */ 1495 switch (config->rx_ring_num) { 1496 case 1: 1497 val64 = 0x0; 1498 writeq(val64, &bar0->rx_w_round_robin_0); 1499 writeq(val64, &bar0->rx_w_round_robin_1); 1500 writeq(val64, &bar0->rx_w_round_robin_2); 1501 writeq(val64, &bar0->rx_w_round_robin_3); 1502 writeq(val64, &bar0->rx_w_round_robin_4); 1503 1504 val64 = 0x8080808080808080ULL; 1505 writeq(val64, &bar0->rts_qos_steering); 1506 break; 1507 case 2: 1508 val64 = 0x0001000100010001ULL; 1509 writeq(val64, &bar0->rx_w_round_robin_0); 1510 writeq(val64, &bar0->rx_w_round_robin_1); 1511 writeq(val64, &bar0->rx_w_round_robin_2); 1512 writeq(val64, &bar0->rx_w_round_robin_3); 1513 val64 = 0x0001000100000000ULL; 1514 writeq(val64, &bar0->rx_w_round_robin_4); 1515 1516 val64 = 0x8080808040404040ULL; 1517 writeq(val64, &bar0->rts_qos_steering); 1518 break; 1519 case 3: 1520 val64 = 0x0001020001020001ULL; 1521 writeq(val64, &bar0->rx_w_round_robin_0); 1522 val64 = 0x0200010200010200ULL; 1523 writeq(val64, &bar0->rx_w_round_robin_1); 1524 val64 = 0x0102000102000102ULL; 1525 writeq(val64, &bar0->rx_w_round_robin_2); 1526 val64 = 0x0001020001020001ULL; 1527 writeq(val64, &bar0->rx_w_round_robin_3); 1528 val64 = 0x0200010200000000ULL; 1529 writeq(val64, &bar0->rx_w_round_robin_4); 1530 1531 val64 = 0x8080804040402020ULL; 1532 writeq(val64, &bar0->rts_qos_steering); 1533 break; 1534 case 4: 1535 val64 = 0x0001020300010203ULL; 1536 writeq(val64, &bar0->rx_w_round_robin_0); 1537 writeq(val64, &bar0->rx_w_round_robin_1); 1538 writeq(val64, &bar0->rx_w_round_robin_2); 1539 writeq(val64, &bar0->rx_w_round_robin_3); 1540 val64 = 0x0001020300000000ULL; 1541 writeq(val64, &bar0->rx_w_round_robin_4); 1542 1543 val64 = 0x8080404020201010ULL; 1544 writeq(val64, &bar0->rts_qos_steering); 1545 break; 1546 case 5: 1547 val64 = 0x0001020304000102ULL; 1548 writeq(val64, &bar0->rx_w_round_robin_0); 1549 val64 = 0x0304000102030400ULL; 1550 writeq(val64, &bar0->rx_w_round_robin_1); 1551 val64 = 0x0102030400010203ULL; 1552 writeq(val64, &bar0->rx_w_round_robin_2); 1553 val64 = 0x0400010203040001ULL; 1554 writeq(val64, &bar0->rx_w_round_robin_3); 1555 val64 = 0x0203040000000000ULL; 1556 writeq(val64, &bar0->rx_w_round_robin_4); 1557 1558 val64 = 0x8080404020201008ULL; 1559 writeq(val64, &bar0->rts_qos_steering); 1560 break; 1561 case 6: 1562 val64 = 0x0001020304050001ULL; 1563 writeq(val64, &bar0->rx_w_round_robin_0); 1564 val64 = 0x0203040500010203ULL; 1565 writeq(val64, &bar0->rx_w_round_robin_1); 1566 val64 = 0x0405000102030405ULL; 1567 writeq(val64, &bar0->rx_w_round_robin_2); 1568 val64 = 0x0001020304050001ULL; 1569 writeq(val64, &bar0->rx_w_round_robin_3); 1570 val64 = 0x0203040500000000ULL; 1571 writeq(val64, &bar0->rx_w_round_robin_4); 1572 1573 val64 = 0x8080404020100804ULL; 1574 writeq(val64, &bar0->rts_qos_steering); 1575 break; 1576 case 7: 1577 val64 = 0x0001020304050600ULL; 1578 writeq(val64, &bar0->rx_w_round_robin_0); 1579 val64 = 0x0102030405060001ULL; 1580 writeq(val64, &bar0->rx_w_round_robin_1); 1581 val64 = 0x0203040506000102ULL; 1582 writeq(val64, &bar0->rx_w_round_robin_2); 1583 val64 = 0x0304050600010203ULL; 1584 writeq(val64, &bar0->rx_w_round_robin_3); 1585 val64 = 0x0405060000000000ULL; 1586 writeq(val64, &bar0->rx_w_round_robin_4); 1587 1588 val64 = 0x8080402010080402ULL; 1589 writeq(val64, &bar0->rts_qos_steering); 1590 break; 1591 case 8: 1592 val64 = 0x0001020304050607ULL; 1593 writeq(val64, &bar0->rx_w_round_robin_0); 1594 writeq(val64, &bar0->rx_w_round_robin_1); 1595 writeq(val64, &bar0->rx_w_round_robin_2); 1596 writeq(val64, &bar0->rx_w_round_robin_3); 1597 val64 = 0x0001020300000000ULL; 1598 writeq(val64, &bar0->rx_w_round_robin_4); 1599 1600 val64 = 0x8040201008040201ULL; 1601 writeq(val64, &bar0->rts_qos_steering); 1602 break; 1603 } 1604 1605 /* UDP Fix */ 1606 val64 = 0; 1607 for (i = 0; i < 8; i++) 1608 writeq(val64, &bar0->rts_frm_len_n[i]); 1609 1610 /* Set the default rts frame length for the rings configured */ 1611 val64 = MAC_RTS_FRM_LEN_SET(dev->mtu+22); 1612 for (i = 0 ; i < config->rx_ring_num ; i++) 1613 writeq(val64, &bar0->rts_frm_len_n[i]); 1614 1615 /* Set the frame length for the configured rings 1616 * desired by the user 1617 */ 1618 for (i = 0; i < config->rx_ring_num; i++) { 1619 /* If rts_frm_len[i] == 0 then it is assumed that user not 1620 * specified frame length steering. 1621 * If the user provides the frame length then program 1622 * the rts_frm_len register for those values or else 1623 * leave it as it is. 1624 */ 1625 if (rts_frm_len[i] != 0) { 1626 writeq(MAC_RTS_FRM_LEN_SET(rts_frm_len[i]), 1627 &bar0->rts_frm_len_n[i]); 1628 } 1629 } 1630 1631 /* Disable differentiated services steering logic */ 1632 for (i = 0; i < 64; i++) { 1633 if (rts_ds_steer(nic, i, 0) == FAILURE) { 1634 DBG_PRINT(ERR_DBG, 1635 "%s: rts_ds_steer failed on codepoint %d\n", 1636 dev->name, i); 1637 return -ENODEV; 1638 } 1639 } 1640 1641 /* Program statistics memory */ 1642 writeq(mac_control->stats_mem_phy, &bar0->stat_addr); 1643 1644 if (nic->device_type == XFRAME_II_DEVICE) { 1645 val64 = STAT_BC(0x320); 1646 writeq(val64, &bar0->stat_byte_cnt); 1647 } 1648 1649 /* 1650 * Initializing the sampling rate for the device to calculate the 1651 * bandwidth utilization. 1652 */ 1653 val64 = MAC_TX_LINK_UTIL_VAL(tmac_util_period) | 1654 MAC_RX_LINK_UTIL_VAL(rmac_util_period); 1655 writeq(val64, &bar0->mac_link_util); 1656 1657 /* 1658 * Initializing the Transmit and Receive Traffic Interrupt 1659 * Scheme. 1660 */ 1661 1662 /* Initialize TTI */ 1663 if (SUCCESS != init_tti(nic, nic->last_link_state)) 1664 return -ENODEV; 1665 1666 /* RTI Initialization */ 1667 if (nic->device_type == XFRAME_II_DEVICE) { 1668 /* 1669 * Programmed to generate Apprx 500 Intrs per 1670 * second 1671 */ 1672 int count = (nic->config.bus_speed * 125)/4; 1673 val64 = RTI_DATA1_MEM_RX_TIMER_VAL(count); 1674 } else 1675 val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF); 1676 val64 |= RTI_DATA1_MEM_RX_URNG_A(0xA) | 1677 RTI_DATA1_MEM_RX_URNG_B(0x10) | 1678 RTI_DATA1_MEM_RX_URNG_C(0x30) | 1679 RTI_DATA1_MEM_RX_TIMER_AC_EN; 1680 1681 writeq(val64, &bar0->rti_data1_mem); 1682 1683 val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) | 1684 RTI_DATA2_MEM_RX_UFC_B(0x2) ; 1685 if (nic->config.intr_type == MSI_X) 1686 val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x20) | 1687 RTI_DATA2_MEM_RX_UFC_D(0x40)); 1688 else 1689 val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x40) | 1690 RTI_DATA2_MEM_RX_UFC_D(0x80)); 1691 writeq(val64, &bar0->rti_data2_mem); 1692 1693 for (i = 0; i < config->rx_ring_num; i++) { 1694 val64 = RTI_CMD_MEM_WE | 1695 RTI_CMD_MEM_STROBE_NEW_CMD | 1696 RTI_CMD_MEM_OFFSET(i); 1697 writeq(val64, &bar0->rti_command_mem); 1698 1699 /* 1700 * Once the operation completes, the Strobe bit of the 1701 * command register will be reset. We poll for this 1702 * particular condition. We wait for a maximum of 500ms 1703 * for the operation to complete, if it's not complete 1704 * by then we return error. 1705 */ 1706 time = 0; 1707 while (true) { 1708 val64 = readq(&bar0->rti_command_mem); 1709 if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD)) 1710 break; 1711 1712 if (time > 10) { 1713 DBG_PRINT(ERR_DBG, "%s: RTI init failed\n", 1714 dev->name); 1715 return -ENODEV; 1716 } 1717 time++; 1718 msleep(50); 1719 } 1720 } 1721 1722 /* 1723 * Initializing proper values as Pause threshold into all 1724 * the 8 Queues on Rx side. 1725 */ 1726 writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q0q3); 1727 writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q4q7); 1728 1729 /* Disable RMAC PAD STRIPPING */ 1730 add = &bar0->mac_cfg; 1731 val64 = readq(&bar0->mac_cfg); 1732 val64 &= ~(MAC_CFG_RMAC_STRIP_PAD); 1733 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key); 1734 writel((u32) (val64), add); 1735 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key); 1736 writel((u32) (val64 >> 32), (add + 4)); 1737 val64 = readq(&bar0->mac_cfg); 1738 1739 /* Enable FCS stripping by adapter */ 1740 add = &bar0->mac_cfg; 1741 val64 = readq(&bar0->mac_cfg); 1742 val64 |= MAC_CFG_RMAC_STRIP_FCS; 1743 if (nic->device_type == XFRAME_II_DEVICE) 1744 writeq(val64, &bar0->mac_cfg); 1745 else { 1746 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key); 1747 writel((u32) (val64), add); 1748 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key); 1749 writel((u32) (val64 >> 32), (add + 4)); 1750 } 1751 1752 /* 1753 * Set the time value to be inserted in the pause frame 1754 * generated by xena. 1755 */ 1756 val64 = readq(&bar0->rmac_pause_cfg); 1757 val64 &= ~(RMAC_PAUSE_HG_PTIME(0xffff)); 1758 val64 |= RMAC_PAUSE_HG_PTIME(nic->mac_control.rmac_pause_time); 1759 writeq(val64, &bar0->rmac_pause_cfg); 1760 1761 /* 1762 * Set the Threshold Limit for Generating the pause frame 1763 * If the amount of data in any Queue exceeds ratio of 1764 * (mac_control.mc_pause_threshold_q0q3 or q4q7)/256 1765 * pause frame is generated 1766 */ 1767 val64 = 0; 1768 for (i = 0; i < 4; i++) { 1769 val64 |= (((u64)0xFF00 | 1770 nic->mac_control.mc_pause_threshold_q0q3) 1771 << (i * 2 * 8)); 1772 } 1773 writeq(val64, &bar0->mc_pause_thresh_q0q3); 1774 1775 val64 = 0; 1776 for (i = 0; i < 4; i++) { 1777 val64 |= (((u64)0xFF00 | 1778 nic->mac_control.mc_pause_threshold_q4q7) 1779 << (i * 2 * 8)); 1780 } 1781 writeq(val64, &bar0->mc_pause_thresh_q4q7); 1782 1783 /* 1784 * TxDMA will stop Read request if the number of read split has 1785 * exceeded the limit pointed by shared_splits 1786 */ 1787 val64 = readq(&bar0->pic_control); 1788 val64 |= PIC_CNTL_SHARED_SPLITS(shared_splits); 1789 writeq(val64, &bar0->pic_control); 1790 1791 if (nic->config.bus_speed == 266) { 1792 writeq(TXREQTO_VAL(0x7f) | TXREQTO_EN, &bar0->txreqtimeout); 1793 writeq(0x0, &bar0->read_retry_delay); 1794 writeq(0x0, &bar0->write_retry_delay); 1795 } 1796 1797 /* 1798 * Programming the Herc to split every write transaction 1799 * that does not start on an ADB to reduce disconnects. 1800 */ 1801 if (nic->device_type == XFRAME_II_DEVICE) { 1802 val64 = FAULT_BEHAVIOUR | EXT_REQ_EN | 1803 MISC_LINK_STABILITY_PRD(3); 1804 writeq(val64, &bar0->misc_control); 1805 val64 = readq(&bar0->pic_control2); 1806 val64 &= ~(s2BIT(13)|s2BIT(14)|s2BIT(15)); 1807 writeq(val64, &bar0->pic_control2); 1808 } 1809 if (strstr(nic->product_name, "CX4")) { 1810 val64 = TMAC_AVG_IPG(0x17); 1811 writeq(val64, &bar0->tmac_avg_ipg); 1812 } 1813 1814 return SUCCESS; 1815 } 1816 #define LINK_UP_DOWN_INTERRUPT 1 1817 #define MAC_RMAC_ERR_TIMER 2 1818 1819 static int s2io_link_fault_indication(struct s2io_nic *nic) 1820 { 1821 if (nic->device_type == XFRAME_II_DEVICE) 1822 return LINK_UP_DOWN_INTERRUPT; 1823 else 1824 return MAC_RMAC_ERR_TIMER; 1825 } 1826 1827 /** 1828 * do_s2io_write_bits - update alarm bits in alarm register 1829 * @value: alarm bits 1830 * @flag: interrupt status 1831 * @addr: address value 1832 * Description: update alarm bits in alarm register 1833 * Return Value: 1834 * NONE. 1835 */ 1836 static void do_s2io_write_bits(u64 value, int flag, void __iomem *addr) 1837 { 1838 u64 temp64; 1839 1840 temp64 = readq(addr); 1841 1842 if (flag == ENABLE_INTRS) 1843 temp64 &= ~((u64)value); 1844 else 1845 temp64 |= ((u64)value); 1846 writeq(temp64, addr); 1847 } 1848 1849 static void en_dis_err_alarms(struct s2io_nic *nic, u16 mask, int flag) 1850 { 1851 struct XENA_dev_config __iomem *bar0 = nic->bar0; 1852 register u64 gen_int_mask = 0; 1853 u64 interruptible; 1854 1855 writeq(DISABLE_ALL_INTRS, &bar0->general_int_mask); 1856 if (mask & TX_DMA_INTR) { 1857 gen_int_mask |= TXDMA_INT_M; 1858 1859 do_s2io_write_bits(TXDMA_TDA_INT | TXDMA_PFC_INT | 1860 TXDMA_PCC_INT | TXDMA_TTI_INT | 1861 TXDMA_LSO_INT | TXDMA_TPA_INT | 1862 TXDMA_SM_INT, flag, &bar0->txdma_int_mask); 1863 1864 do_s2io_write_bits(PFC_ECC_DB_ERR | PFC_SM_ERR_ALARM | 1865 PFC_MISC_0_ERR | PFC_MISC_1_ERR | 1866 PFC_PCIX_ERR | PFC_ECC_SG_ERR, flag, 1867 &bar0->pfc_err_mask); 1868 1869 do_s2io_write_bits(TDA_Fn_ECC_DB_ERR | TDA_SM0_ERR_ALARM | 1870 TDA_SM1_ERR_ALARM | TDA_Fn_ECC_SG_ERR | 1871 TDA_PCIX_ERR, flag, &bar0->tda_err_mask); 1872 1873 do_s2io_write_bits(PCC_FB_ECC_DB_ERR | PCC_TXB_ECC_DB_ERR | 1874 PCC_SM_ERR_ALARM | PCC_WR_ERR_ALARM | 1875 PCC_N_SERR | PCC_6_COF_OV_ERR | 1876 PCC_7_COF_OV_ERR | PCC_6_LSO_OV_ERR | 1877 PCC_7_LSO_OV_ERR | PCC_FB_ECC_SG_ERR | 1878 PCC_TXB_ECC_SG_ERR, 1879 flag, &bar0->pcc_err_mask); 1880 1881 do_s2io_write_bits(TTI_SM_ERR_ALARM | TTI_ECC_SG_ERR | 1882 TTI_ECC_DB_ERR, flag, &bar0->tti_err_mask); 1883 1884 do_s2io_write_bits(LSO6_ABORT | LSO7_ABORT | 1885 LSO6_SM_ERR_ALARM | LSO7_SM_ERR_ALARM | 1886 LSO6_SEND_OFLOW | LSO7_SEND_OFLOW, 1887 flag, &bar0->lso_err_mask); 1888 1889 do_s2io_write_bits(TPA_SM_ERR_ALARM | TPA_TX_FRM_DROP, 1890 flag, &bar0->tpa_err_mask); 1891 1892 do_s2io_write_bits(SM_SM_ERR_ALARM, flag, &bar0->sm_err_mask); 1893 } 1894 1895 if (mask & TX_MAC_INTR) { 1896 gen_int_mask |= TXMAC_INT_M; 1897 do_s2io_write_bits(MAC_INT_STATUS_TMAC_INT, flag, 1898 &bar0->mac_int_mask); 1899 do_s2io_write_bits(TMAC_TX_BUF_OVRN | TMAC_TX_SM_ERR | 1900 TMAC_ECC_SG_ERR | TMAC_ECC_DB_ERR | 1901 TMAC_DESC_ECC_SG_ERR | TMAC_DESC_ECC_DB_ERR, 1902 flag, &bar0->mac_tmac_err_mask); 1903 } 1904 1905 if (mask & TX_XGXS_INTR) { 1906 gen_int_mask |= TXXGXS_INT_M; 1907 do_s2io_write_bits(XGXS_INT_STATUS_TXGXS, flag, 1908 &bar0->xgxs_int_mask); 1909 do_s2io_write_bits(TXGXS_ESTORE_UFLOW | TXGXS_TX_SM_ERR | 1910 TXGXS_ECC_SG_ERR | TXGXS_ECC_DB_ERR, 1911 flag, &bar0->xgxs_txgxs_err_mask); 1912 } 1913 1914 if (mask & RX_DMA_INTR) { 1915 gen_int_mask |= RXDMA_INT_M; 1916 do_s2io_write_bits(RXDMA_INT_RC_INT_M | RXDMA_INT_RPA_INT_M | 1917 RXDMA_INT_RDA_INT_M | RXDMA_INT_RTI_INT_M, 1918 flag, &bar0->rxdma_int_mask); 1919 do_s2io_write_bits(RC_PRCn_ECC_DB_ERR | RC_FTC_ECC_DB_ERR | 1920 RC_PRCn_SM_ERR_ALARM | RC_FTC_SM_ERR_ALARM | 1921 RC_PRCn_ECC_SG_ERR | RC_FTC_ECC_SG_ERR | 1922 RC_RDA_FAIL_WR_Rn, flag, &bar0->rc_err_mask); 1923 do_s2io_write_bits(PRC_PCI_AB_RD_Rn | PRC_PCI_AB_WR_Rn | 1924 PRC_PCI_AB_F_WR_Rn | PRC_PCI_DP_RD_Rn | 1925 PRC_PCI_DP_WR_Rn | PRC_PCI_DP_F_WR_Rn, flag, 1926 &bar0->prc_pcix_err_mask); 1927 do_s2io_write_bits(RPA_SM_ERR_ALARM | RPA_CREDIT_ERR | 1928 RPA_ECC_SG_ERR | RPA_ECC_DB_ERR, flag, 1929 &bar0->rpa_err_mask); 1930 do_s2io_write_bits(RDA_RXDn_ECC_DB_ERR | RDA_FRM_ECC_DB_N_AERR | 1931 RDA_SM1_ERR_ALARM | RDA_SM0_ERR_ALARM | 1932 RDA_RXD_ECC_DB_SERR | RDA_RXDn_ECC_SG_ERR | 1933 RDA_FRM_ECC_SG_ERR | 1934 RDA_MISC_ERR|RDA_PCIX_ERR, 1935 flag, &bar0->rda_err_mask); 1936 do_s2io_write_bits(RTI_SM_ERR_ALARM | 1937 RTI_ECC_SG_ERR | RTI_ECC_DB_ERR, 1938 flag, &bar0->rti_err_mask); 1939 } 1940 1941 if (mask & RX_MAC_INTR) { 1942 gen_int_mask |= RXMAC_INT_M; 1943 do_s2io_write_bits(MAC_INT_STATUS_RMAC_INT, flag, 1944 &bar0->mac_int_mask); 1945 interruptible = (RMAC_RX_BUFF_OVRN | RMAC_RX_SM_ERR | 1946 RMAC_UNUSED_INT | RMAC_SINGLE_ECC_ERR | 1947 RMAC_DOUBLE_ECC_ERR); 1948 if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) 1949 interruptible |= RMAC_LINK_STATE_CHANGE_INT; 1950 do_s2io_write_bits(interruptible, 1951 flag, &bar0->mac_rmac_err_mask); 1952 } 1953 1954 if (mask & RX_XGXS_INTR) { 1955 gen_int_mask |= RXXGXS_INT_M; 1956 do_s2io_write_bits(XGXS_INT_STATUS_RXGXS, flag, 1957 &bar0->xgxs_int_mask); 1958 do_s2io_write_bits(RXGXS_ESTORE_OFLOW | RXGXS_RX_SM_ERR, flag, 1959 &bar0->xgxs_rxgxs_err_mask); 1960 } 1961 1962 if (mask & MC_INTR) { 1963 gen_int_mask |= MC_INT_M; 1964 do_s2io_write_bits(MC_INT_MASK_MC_INT, 1965 flag, &bar0->mc_int_mask); 1966 do_s2io_write_bits(MC_ERR_REG_SM_ERR | MC_ERR_REG_ECC_ALL_SNG | 1967 MC_ERR_REG_ECC_ALL_DBL | PLL_LOCK_N, flag, 1968 &bar0->mc_err_mask); 1969 } 1970 nic->general_int_mask = gen_int_mask; 1971 1972 /* Remove this line when alarm interrupts are enabled */ 1973 nic->general_int_mask = 0; 1974 } 1975 1976 /** 1977 * en_dis_able_nic_intrs - Enable or Disable the interrupts 1978 * @nic: device private variable, 1979 * @mask: A mask indicating which Intr block must be modified and, 1980 * @flag: A flag indicating whether to enable or disable the Intrs. 1981 * Description: This function will either disable or enable the interrupts 1982 * depending on the flag argument. The mask argument can be used to 1983 * enable/disable any Intr block. 1984 * Return Value: NONE. 1985 */ 1986 1987 static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) 1988 { 1989 struct XENA_dev_config __iomem *bar0 = nic->bar0; 1990 register u64 temp64 = 0, intr_mask = 0; 1991 1992 intr_mask = nic->general_int_mask; 1993 1994 /* Top level interrupt classification */ 1995 /* PIC Interrupts */ 1996 if (mask & TX_PIC_INTR) { 1997 /* Enable PIC Intrs in the general intr mask register */ 1998 intr_mask |= TXPIC_INT_M; 1999 if (flag == ENABLE_INTRS) { 2000 /* 2001 * If Hercules adapter enable GPIO otherwise 2002 * disable all PCIX, Flash, MDIO, IIC and GPIO 2003 * interrupts for now. 2004 * TODO 2005 */ 2006 if (s2io_link_fault_indication(nic) == 2007 LINK_UP_DOWN_INTERRUPT) { 2008 do_s2io_write_bits(PIC_INT_GPIO, flag, 2009 &bar0->pic_int_mask); 2010 do_s2io_write_bits(GPIO_INT_MASK_LINK_UP, flag, 2011 &bar0->gpio_int_mask); 2012 } else 2013 writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask); 2014 } else if (flag == DISABLE_INTRS) { 2015 /* 2016 * Disable PIC Intrs in the general 2017 * intr mask register 2018 */ 2019 writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask); 2020 } 2021 } 2022 2023 /* Tx traffic interrupts */ 2024 if (mask & TX_TRAFFIC_INTR) { 2025 intr_mask |= TXTRAFFIC_INT_M; 2026 if (flag == ENABLE_INTRS) { 2027 /* 2028 * Enable all the Tx side interrupts 2029 * writing 0 Enables all 64 TX interrupt levels 2030 */ 2031 writeq(0x0, &bar0->tx_traffic_mask); 2032 } else if (flag == DISABLE_INTRS) { 2033 /* 2034 * Disable Tx Traffic Intrs in the general intr mask 2035 * register. 2036 */ 2037 writeq(DISABLE_ALL_INTRS, &bar0->tx_traffic_mask); 2038 } 2039 } 2040 2041 /* Rx traffic interrupts */ 2042 if (mask & RX_TRAFFIC_INTR) { 2043 intr_mask |= RXTRAFFIC_INT_M; 2044 if (flag == ENABLE_INTRS) { 2045 /* writing 0 Enables all 8 RX interrupt levels */ 2046 writeq(0x0, &bar0->rx_traffic_mask); 2047 } else if (flag == DISABLE_INTRS) { 2048 /* 2049 * Disable Rx Traffic Intrs in the general intr mask 2050 * register. 2051 */ 2052 writeq(DISABLE_ALL_INTRS, &bar0->rx_traffic_mask); 2053 } 2054 } 2055 2056 temp64 = readq(&bar0->general_int_mask); 2057 if (flag == ENABLE_INTRS) 2058 temp64 &= ~((u64)intr_mask); 2059 else 2060 temp64 = DISABLE_ALL_INTRS; 2061 writeq(temp64, &bar0->general_int_mask); 2062 2063 nic->general_int_mask = readq(&bar0->general_int_mask); 2064 } 2065 2066 /** 2067 * verify_pcc_quiescent- Checks for PCC quiescent state 2068 * Return: 1 If PCC is quiescence 2069 * 0 If PCC is not quiescence 2070 */ 2071 static int verify_pcc_quiescent(struct s2io_nic *sp, int flag) 2072 { 2073 int ret = 0, herc; 2074 struct XENA_dev_config __iomem *bar0 = sp->bar0; 2075 u64 val64 = readq(&bar0->adapter_status); 2076 2077 herc = (sp->device_type == XFRAME_II_DEVICE); 2078 2079 if (flag == false) { 2080 if ((!herc && (sp->pdev->revision >= 4)) || herc) { 2081 if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE)) 2082 ret = 1; 2083 } else { 2084 if (!(val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE)) 2085 ret = 1; 2086 } 2087 } else { 2088 if ((!herc && (sp->pdev->revision >= 4)) || herc) { 2089 if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) == 2090 ADAPTER_STATUS_RMAC_PCC_IDLE)) 2091 ret = 1; 2092 } else { 2093 if (((val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) == 2094 ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE)) 2095 ret = 1; 2096 } 2097 } 2098 2099 return ret; 2100 } 2101 /** 2102 * verify_xena_quiescence - Checks whether the H/W is ready 2103 * Description: Returns whether the H/W is ready to go or not. Depending 2104 * on whether adapter enable bit was written or not the comparison 2105 * differs and the calling function passes the input argument flag to 2106 * indicate this. 2107 * Return: 1 If xena is quiescence 2108 * 0 If Xena is not quiescence 2109 */ 2110 2111 static int verify_xena_quiescence(struct s2io_nic *sp) 2112 { 2113 int mode; 2114 struct XENA_dev_config __iomem *bar0 = sp->bar0; 2115 u64 val64 = readq(&bar0->adapter_status); 2116 mode = s2io_verify_pci_mode(sp); 2117 2118 if (!(val64 & ADAPTER_STATUS_TDMA_READY)) { 2119 DBG_PRINT(ERR_DBG, "TDMA is not ready!\n"); 2120 return 0; 2121 } 2122 if (!(val64 & ADAPTER_STATUS_RDMA_READY)) { 2123 DBG_PRINT(ERR_DBG, "RDMA is not ready!\n"); 2124 return 0; 2125 } 2126 if (!(val64 & ADAPTER_STATUS_PFC_READY)) { 2127 DBG_PRINT(ERR_DBG, "PFC is not ready!\n"); 2128 return 0; 2129 } 2130 if (!(val64 & ADAPTER_STATUS_TMAC_BUF_EMPTY)) { 2131 DBG_PRINT(ERR_DBG, "TMAC BUF is not empty!\n"); 2132 return 0; 2133 } 2134 if (!(val64 & ADAPTER_STATUS_PIC_QUIESCENT)) { 2135 DBG_PRINT(ERR_DBG, "PIC is not QUIESCENT!\n"); 2136 return 0; 2137 } 2138 if (!(val64 & ADAPTER_STATUS_MC_DRAM_READY)) { 2139 DBG_PRINT(ERR_DBG, "MC_DRAM is not ready!\n"); 2140 return 0; 2141 } 2142 if (!(val64 & ADAPTER_STATUS_MC_QUEUES_READY)) { 2143 DBG_PRINT(ERR_DBG, "MC_QUEUES is not ready!\n"); 2144 return 0; 2145 } 2146 if (!(val64 & ADAPTER_STATUS_M_PLL_LOCK)) { 2147 DBG_PRINT(ERR_DBG, "M_PLL is not locked!\n"); 2148 return 0; 2149 } 2150 2151 /* 2152 * In PCI 33 mode, the P_PLL is not used, and therefore, 2153 * the the P_PLL_LOCK bit in the adapter_status register will 2154 * not be asserted. 2155 */ 2156 if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) && 2157 sp->device_type == XFRAME_II_DEVICE && 2158 mode != PCI_MODE_PCI_33) { 2159 DBG_PRINT(ERR_DBG, "P_PLL is not locked!\n"); 2160 return 0; 2161 } 2162 if (!((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == 2163 ADAPTER_STATUS_RC_PRC_QUIESCENT)) { 2164 DBG_PRINT(ERR_DBG, "RC_PRC is not QUIESCENT!\n"); 2165 return 0; 2166 } 2167 return 1; 2168 } 2169 2170 /** 2171 * fix_mac_address - Fix for Mac addr problem on Alpha platforms 2172 * @sp: Pointer to device specifc structure 2173 * Description : 2174 * New procedure to clear mac address reading problems on Alpha platforms 2175 * 2176 */ 2177 2178 static void fix_mac_address(struct s2io_nic *sp) 2179 { 2180 struct XENA_dev_config __iomem *bar0 = sp->bar0; 2181 int i = 0; 2182 2183 while (fix_mac[i] != END_SIGN) { 2184 writeq(fix_mac[i++], &bar0->gpio_control); 2185 udelay(10); 2186 (void) readq(&bar0->gpio_control); 2187 } 2188 } 2189 2190 /** 2191 * start_nic - Turns the device on 2192 * @nic : device private variable. 2193 * Description: 2194 * This function actually turns the device on. Before this function is 2195 * called,all Registers are configured from their reset states 2196 * and shared memory is allocated but the NIC is still quiescent. On 2197 * calling this function, the device interrupts are cleared and the NIC is 2198 * literally switched on by writing into the adapter control register. 2199 * Return Value: 2200 * SUCCESS on success and -1 on failure. 2201 */ 2202 2203 static int start_nic(struct s2io_nic *nic) 2204 { 2205 struct XENA_dev_config __iomem *bar0 = nic->bar0; 2206 struct net_device *dev = nic->dev; 2207 register u64 val64 = 0; 2208 u16 subid, i; 2209 struct config_param *config = &nic->config; 2210 struct mac_info *mac_control = &nic->mac_control; 2211 2212 /* PRC Initialization and configuration */ 2213 for (i = 0; i < config->rx_ring_num; i++) { 2214 struct ring_info *ring = &mac_control->rings[i]; 2215 2216 writeq((u64)ring->rx_blocks[0].block_dma_addr, 2217 &bar0->prc_rxd0_n[i]); 2218 2219 val64 = readq(&bar0->prc_ctrl_n[i]); 2220 if (nic->rxd_mode == RXD_MODE_1) 2221 val64 |= PRC_CTRL_RC_ENABLED; 2222 else 2223 val64 |= PRC_CTRL_RC_ENABLED | PRC_CTRL_RING_MODE_3; 2224 if (nic->device_type == XFRAME_II_DEVICE) 2225 val64 |= PRC_CTRL_GROUP_READS; 2226 val64 &= ~PRC_CTRL_RXD_BACKOFF_INTERVAL(0xFFFFFF); 2227 val64 |= PRC_CTRL_RXD_BACKOFF_INTERVAL(0x1000); 2228 writeq(val64, &bar0->prc_ctrl_n[i]); 2229 } 2230 2231 if (nic->rxd_mode == RXD_MODE_3B) { 2232 /* Enabling 2 buffer mode by writing into Rx_pa_cfg reg. */ 2233 val64 = readq(&bar0->rx_pa_cfg); 2234 val64 |= RX_PA_CFG_IGNORE_L2_ERR; 2235 writeq(val64, &bar0->rx_pa_cfg); 2236 } 2237 2238 if (vlan_tag_strip == 0) { 2239 val64 = readq(&bar0->rx_pa_cfg); 2240 val64 &= ~RX_PA_CFG_STRIP_VLAN_TAG; 2241 writeq(val64, &bar0->rx_pa_cfg); 2242 nic->vlan_strip_flag = 0; 2243 } 2244 2245 /* 2246 * Enabling MC-RLDRAM. After enabling the device, we timeout 2247 * for around 100ms, which is approximately the time required 2248 * for the device to be ready for operation. 2249 */ 2250 val64 = readq(&bar0->mc_rldram_mrs); 2251 val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE | MC_RLDRAM_MRS_ENABLE; 2252 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF); 2253 val64 = readq(&bar0->mc_rldram_mrs); 2254 2255 msleep(100); /* Delay by around 100 ms. */ 2256 2257 /* Enabling ECC Protection. */ 2258 val64 = readq(&bar0->adapter_control); 2259 val64 &= ~ADAPTER_ECC_EN; 2260 writeq(val64, &bar0->adapter_control); 2261 2262 /* 2263 * Verify if the device is ready to be enabled, if so enable 2264 * it. 2265 */ 2266 val64 = readq(&bar0->adapter_status); 2267 if (!verify_xena_quiescence(nic)) { 2268 DBG_PRINT(ERR_DBG, "%s: device is not ready, " 2269 "Adapter status reads: 0x%llx\n", 2270 dev->name, (unsigned long long)val64); 2271 return FAILURE; 2272 } 2273 2274 /* 2275 * With some switches, link might be already up at this point. 2276 * Because of this weird behavior, when we enable laser, 2277 * we may not get link. We need to handle this. We cannot 2278 * figure out which switch is misbehaving. So we are forced to 2279 * make a global change. 2280 */ 2281 2282 /* Enabling Laser. */ 2283 val64 = readq(&bar0->adapter_control); 2284 val64 |= ADAPTER_EOI_TX_ON; 2285 writeq(val64, &bar0->adapter_control); 2286 2287 if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) { 2288 /* 2289 * Dont see link state interrupts initially on some switches, 2290 * so directly scheduling the link state task here. 2291 */ 2292 schedule_work(&nic->set_link_task); 2293 } 2294 /* SXE-002: Initialize link and activity LED */ 2295 subid = nic->pdev->subsystem_device; 2296 if (((subid & 0xFF) >= 0x07) && 2297 (nic->device_type == XFRAME_I_DEVICE)) { 2298 val64 = readq(&bar0->gpio_control); 2299 val64 |= 0x0000800000000000ULL; 2300 writeq(val64, &bar0->gpio_control); 2301 val64 = 0x0411040400000000ULL; 2302 writeq(val64, (void __iomem *)bar0 + 0x2700); 2303 } 2304 2305 return SUCCESS; 2306 } 2307 /** 2308 * s2io_txdl_getskb - Get the skb from txdl, unmap and return skb 2309 */ 2310 static struct sk_buff *s2io_txdl_getskb(struct fifo_info *fifo_data, 2311 struct TxD *txdlp, int get_off) 2312 { 2313 struct s2io_nic *nic = fifo_data->nic; 2314 struct sk_buff *skb; 2315 struct TxD *txds; 2316 u16 j, frg_cnt; 2317 2318 txds = txdlp; 2319 if (txds->Host_Control == (u64)(long)fifo_data->ufo_in_band_v) { 2320 pci_unmap_single(nic->pdev, (dma_addr_t)txds->Buffer_Pointer, 2321 sizeof(u64), PCI_DMA_TODEVICE); 2322 txds++; 2323 } 2324 2325 skb = (struct sk_buff *)((unsigned long)txds->Host_Control); 2326 if (!skb) { 2327 memset(txdlp, 0, (sizeof(struct TxD) * fifo_data->max_txds)); 2328 return NULL; 2329 } 2330 pci_unmap_single(nic->pdev, (dma_addr_t)txds->Buffer_Pointer, 2331 skb_headlen(skb), PCI_DMA_TODEVICE); 2332 frg_cnt = skb_shinfo(skb)->nr_frags; 2333 if (frg_cnt) { 2334 txds++; 2335 for (j = 0; j < frg_cnt; j++, txds++) { 2336 const skb_frag_t *frag = &skb_shinfo(skb)->frags[j]; 2337 if (!txds->Buffer_Pointer) 2338 break; 2339 pci_unmap_page(nic->pdev, 2340 (dma_addr_t)txds->Buffer_Pointer, 2341 skb_frag_size(frag), PCI_DMA_TODEVICE); 2342 } 2343 } 2344 memset(txdlp, 0, (sizeof(struct TxD) * fifo_data->max_txds)); 2345 return skb; 2346 } 2347 2348 /** 2349 * free_tx_buffers - Free all queued Tx buffers 2350 * @nic : device private variable. 2351 * Description: 2352 * Free all queued Tx buffers. 2353 * Return Value: void 2354 */ 2355 2356 static void free_tx_buffers(struct s2io_nic *nic) 2357 { 2358 struct net_device *dev = nic->dev; 2359 struct sk_buff *skb; 2360 struct TxD *txdp; 2361 int i, j; 2362 int cnt = 0; 2363 struct config_param *config = &nic->config; 2364 struct mac_info *mac_control = &nic->mac_control; 2365 struct stat_block *stats = mac_control->stats_info; 2366 struct swStat *swstats = &stats->sw_stat; 2367 2368 for (i = 0; i < config->tx_fifo_num; i++) { 2369 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i]; 2370 struct fifo_info *fifo = &mac_control->fifos[i]; 2371 unsigned long flags; 2372 2373 spin_lock_irqsave(&fifo->tx_lock, flags); 2374 for (j = 0; j < tx_cfg->fifo_len; j++) { 2375 txdp = fifo->list_info[j].list_virt_addr; 2376 skb = s2io_txdl_getskb(&mac_control->fifos[i], txdp, j); 2377 if (skb) { 2378 swstats->mem_freed += skb->truesize; 2379 dev_kfree_skb(skb); 2380 cnt++; 2381 } 2382 } 2383 DBG_PRINT(INTR_DBG, 2384 "%s: forcibly freeing %d skbs on FIFO%d\n", 2385 dev->name, cnt, i); 2386 fifo->tx_curr_get_info.offset = 0; 2387 fifo->tx_curr_put_info.offset = 0; 2388 spin_unlock_irqrestore(&fifo->tx_lock, flags); 2389 } 2390 } 2391 2392 /** 2393 * stop_nic - To stop the nic 2394 * @nic ; device private variable. 2395 * Description: 2396 * This function does exactly the opposite of what the start_nic() 2397 * function does. This function is called to stop the device. 2398 * Return Value: 2399 * void. 2400 */ 2401 2402 static void stop_nic(struct s2io_nic *nic) 2403 { 2404 struct XENA_dev_config __iomem *bar0 = nic->bar0; 2405 register u64 val64 = 0; 2406 u16 interruptible; 2407 2408 /* Disable all interrupts */ 2409 en_dis_err_alarms(nic, ENA_ALL_INTRS, DISABLE_INTRS); 2410 interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR; 2411 interruptible |= TX_PIC_INTR; 2412 en_dis_able_nic_intrs(nic, interruptible, DISABLE_INTRS); 2413 2414 /* Clearing Adapter_En bit of ADAPTER_CONTROL Register */ 2415 val64 = readq(&bar0->adapter_control); 2416 val64 &= ~(ADAPTER_CNTL_EN); 2417 writeq(val64, &bar0->adapter_control); 2418 } 2419 2420 /** 2421 * fill_rx_buffers - Allocates the Rx side skbs 2422 * @ring_info: per ring structure 2423 * @from_card_up: If this is true, we will map the buffer to get 2424 * the dma address for buf0 and buf1 to give it to the card. 2425 * Else we will sync the already mapped buffer to give it to the card. 2426 * Description: 2427 * The function allocates Rx side skbs and puts the physical 2428 * address of these buffers into the RxD buffer pointers, so that the NIC 2429 * can DMA the received frame into these locations. 2430 * The NIC supports 3 receive modes, viz 2431 * 1. single buffer, 2432 * 2. three buffer and 2433 * 3. Five buffer modes. 2434 * Each mode defines how many fragments the received frame will be split 2435 * up into by the NIC. The frame is split into L3 header, L4 Header, 2436 * L4 payload in three buffer mode and in 5 buffer mode, L4 payload itself 2437 * is split into 3 fragments. As of now only single buffer mode is 2438 * supported. 2439 * Return Value: 2440 * SUCCESS on success or an appropriate -ve value on failure. 2441 */ 2442 static int fill_rx_buffers(struct s2io_nic *nic, struct ring_info *ring, 2443 int from_card_up) 2444 { 2445 struct sk_buff *skb; 2446 struct RxD_t *rxdp; 2447 int off, size, block_no, block_no1; 2448 u32 alloc_tab = 0; 2449 u32 alloc_cnt; 2450 u64 tmp; 2451 struct buffAdd *ba; 2452 struct RxD_t *first_rxdp = NULL; 2453 u64 Buffer0_ptr = 0, Buffer1_ptr = 0; 2454 struct RxD1 *rxdp1; 2455 struct RxD3 *rxdp3; 2456 struct swStat *swstats = &ring->nic->mac_control.stats_info->sw_stat; 2457 2458 alloc_cnt = ring->pkt_cnt - ring->rx_bufs_left; 2459 2460 block_no1 = ring->rx_curr_get_info.block_index; 2461 while (alloc_tab < alloc_cnt) { 2462 block_no = ring->rx_curr_put_info.block_index; 2463 2464 off = ring->rx_curr_put_info.offset; 2465 2466 rxdp = ring->rx_blocks[block_no].rxds[off].virt_addr; 2467 2468 if ((block_no == block_no1) && 2469 (off == ring->rx_curr_get_info.offset) && 2470 (rxdp->Host_Control)) { 2471 DBG_PRINT(INTR_DBG, "%s: Get and Put info equated\n", 2472 ring->dev->name); 2473 goto end; 2474 } 2475 if (off && (off == ring->rxd_count)) { 2476 ring->rx_curr_put_info.block_index++; 2477 if (ring->rx_curr_put_info.block_index == 2478 ring->block_count) 2479 ring->rx_curr_put_info.block_index = 0; 2480 block_no = ring->rx_curr_put_info.block_index; 2481 off = 0; 2482 ring->rx_curr_put_info.offset = off; 2483 rxdp = ring->rx_blocks[block_no].block_virt_addr; 2484 DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n", 2485 ring->dev->name, rxdp); 2486 2487 } 2488 2489 if ((rxdp->Control_1 & RXD_OWN_XENA) && 2490 ((ring->rxd_mode == RXD_MODE_3B) && 2491 (rxdp->Control_2 & s2BIT(0)))) { 2492 ring->rx_curr_put_info.offset = off; 2493 goto end; 2494 } 2495 /* calculate size of skb based on ring mode */ 2496 size = ring->mtu + 2497 HEADER_ETHERNET_II_802_3_SIZE + 2498 HEADER_802_2_SIZE + HEADER_SNAP_SIZE; 2499 if (ring->rxd_mode == RXD_MODE_1) 2500 size += NET_IP_ALIGN; 2501 else 2502 size = ring->mtu + ALIGN_SIZE + BUF0_LEN + 4; 2503 2504 /* allocate skb */ 2505 skb = netdev_alloc_skb(nic->dev, size); 2506 if (!skb) { 2507 DBG_PRINT(INFO_DBG, "%s: Could not allocate skb\n", 2508 ring->dev->name); 2509 if (first_rxdp) { 2510 dma_wmb(); 2511 first_rxdp->Control_1 |= RXD_OWN_XENA; 2512 } 2513 swstats->mem_alloc_fail_cnt++; 2514 2515 return -ENOMEM ; 2516 } 2517 swstats->mem_allocated += skb->truesize; 2518 2519 if (ring->rxd_mode == RXD_MODE_1) { 2520 /* 1 buffer mode - normal operation mode */ 2521 rxdp1 = (struct RxD1 *)rxdp; 2522 memset(rxdp, 0, sizeof(struct RxD1)); 2523 skb_reserve(skb, NET_IP_ALIGN); 2524 rxdp1->Buffer0_ptr = 2525 pci_map_single(ring->pdev, skb->data, 2526 size - NET_IP_ALIGN, 2527 PCI_DMA_FROMDEVICE); 2528 if (pci_dma_mapping_error(nic->pdev, 2529 rxdp1->Buffer0_ptr)) 2530 goto pci_map_failed; 2531 2532 rxdp->Control_2 = 2533 SET_BUFFER0_SIZE_1(size - NET_IP_ALIGN); 2534 rxdp->Host_Control = (unsigned long)skb; 2535 } else if (ring->rxd_mode == RXD_MODE_3B) { 2536 /* 2537 * 2 buffer mode - 2538 * 2 buffer mode provides 128 2539 * byte aligned receive buffers. 2540 */ 2541 2542 rxdp3 = (struct RxD3 *)rxdp; 2543 /* save buffer pointers to avoid frequent dma mapping */ 2544 Buffer0_ptr = rxdp3->Buffer0_ptr; 2545 Buffer1_ptr = rxdp3->Buffer1_ptr; 2546 memset(rxdp, 0, sizeof(struct RxD3)); 2547 /* restore the buffer pointers for dma sync*/ 2548 rxdp3->Buffer0_ptr = Buffer0_ptr; 2549 rxdp3->Buffer1_ptr = Buffer1_ptr; 2550 2551 ba = &ring->ba[block_no][off]; 2552 skb_reserve(skb, BUF0_LEN); 2553 tmp = (u64)(unsigned long)skb->data; 2554 tmp += ALIGN_SIZE; 2555 tmp &= ~ALIGN_SIZE; 2556 skb->data = (void *) (unsigned long)tmp; 2557 skb_reset_tail_pointer(skb); 2558 2559 if (from_card_up) { 2560 rxdp3->Buffer0_ptr = 2561 pci_map_single(ring->pdev, ba->ba_0, 2562 BUF0_LEN, 2563 PCI_DMA_FROMDEVICE); 2564 if (pci_dma_mapping_error(nic->pdev, 2565 rxdp3->Buffer0_ptr)) 2566 goto pci_map_failed; 2567 } else 2568 pci_dma_sync_single_for_device(ring->pdev, 2569 (dma_addr_t)rxdp3->Buffer0_ptr, 2570 BUF0_LEN, 2571 PCI_DMA_FROMDEVICE); 2572 2573 rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN); 2574 if (ring->rxd_mode == RXD_MODE_3B) { 2575 /* Two buffer mode */ 2576 2577 /* 2578 * Buffer2 will have L3/L4 header plus 2579 * L4 payload 2580 */ 2581 rxdp3->Buffer2_ptr = pci_map_single(ring->pdev, 2582 skb->data, 2583 ring->mtu + 4, 2584 PCI_DMA_FROMDEVICE); 2585 2586 if (pci_dma_mapping_error(nic->pdev, 2587 rxdp3->Buffer2_ptr)) 2588 goto pci_map_failed; 2589 2590 if (from_card_up) { 2591 rxdp3->Buffer1_ptr = 2592 pci_map_single(ring->pdev, 2593 ba->ba_1, 2594 BUF1_LEN, 2595 PCI_DMA_FROMDEVICE); 2596 2597 if (pci_dma_mapping_error(nic->pdev, 2598 rxdp3->Buffer1_ptr)) { 2599 pci_unmap_single(ring->pdev, 2600 (dma_addr_t)(unsigned long) 2601 skb->data, 2602 ring->mtu + 4, 2603 PCI_DMA_FROMDEVICE); 2604 goto pci_map_failed; 2605 } 2606 } 2607 rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1); 2608 rxdp->Control_2 |= SET_BUFFER2_SIZE_3 2609 (ring->mtu + 4); 2610 } 2611 rxdp->Control_2 |= s2BIT(0); 2612 rxdp->Host_Control = (unsigned long) (skb); 2613 } 2614 if (alloc_tab & ((1 << rxsync_frequency) - 1)) 2615 rxdp->Control_1 |= RXD_OWN_XENA; 2616 off++; 2617 if (off == (ring->rxd_count + 1)) 2618 off = 0; 2619 ring->rx_curr_put_info.offset = off; 2620 2621 rxdp->Control_2 |= SET_RXD_MARKER; 2622 if (!(alloc_tab & ((1 << rxsync_frequency) - 1))) { 2623 if (first_rxdp) { 2624 dma_wmb(); 2625 first_rxdp->Control_1 |= RXD_OWN_XENA; 2626 } 2627 first_rxdp = rxdp; 2628 } 2629 ring->rx_bufs_left += 1; 2630 alloc_tab++; 2631 } 2632 2633 end: 2634 /* Transfer ownership of first descriptor to adapter just before 2635 * exiting. Before that, use memory barrier so that ownership 2636 * and other fields are seen by adapter correctly. 2637 */ 2638 if (first_rxdp) { 2639 dma_wmb(); 2640 first_rxdp->Control_1 |= RXD_OWN_XENA; 2641 } 2642 2643 return SUCCESS; 2644 2645 pci_map_failed: 2646 swstats->pci_map_fail_cnt++; 2647 swstats->mem_freed += skb->truesize; 2648 dev_kfree_skb_irq(skb); 2649 return -ENOMEM; 2650 } 2651 2652 static void free_rxd_blk(struct s2io_nic *sp, int ring_no, int blk) 2653 { 2654 struct net_device *dev = sp->dev; 2655 int j; 2656 struct sk_buff *skb; 2657 struct RxD_t *rxdp; 2658 struct RxD1 *rxdp1; 2659 struct RxD3 *rxdp3; 2660 struct mac_info *mac_control = &sp->mac_control; 2661 struct stat_block *stats = mac_control->stats_info; 2662 struct swStat *swstats = &stats->sw_stat; 2663 2664 for (j = 0 ; j < rxd_count[sp->rxd_mode]; j++) { 2665 rxdp = mac_control->rings[ring_no]. 2666 rx_blocks[blk].rxds[j].virt_addr; 2667 skb = (struct sk_buff *)((unsigned long)rxdp->Host_Control); 2668 if (!skb) 2669 continue; 2670 if (sp->rxd_mode == RXD_MODE_1) { 2671 rxdp1 = (struct RxD1 *)rxdp; 2672 pci_unmap_single(sp->pdev, 2673 (dma_addr_t)rxdp1->Buffer0_ptr, 2674 dev->mtu + 2675 HEADER_ETHERNET_II_802_3_SIZE + 2676 HEADER_802_2_SIZE + HEADER_SNAP_SIZE, 2677 PCI_DMA_FROMDEVICE); 2678 memset(rxdp, 0, sizeof(struct RxD1)); 2679 } else if (sp->rxd_mode == RXD_MODE_3B) { 2680 rxdp3 = (struct RxD3 *)rxdp; 2681 pci_unmap_single(sp->pdev, 2682 (dma_addr_t)rxdp3->Buffer0_ptr, 2683 BUF0_LEN, 2684 PCI_DMA_FROMDEVICE); 2685 pci_unmap_single(sp->pdev, 2686 (dma_addr_t)rxdp3->Buffer1_ptr, 2687 BUF1_LEN, 2688 PCI_DMA_FROMDEVICE); 2689 pci_unmap_single(sp->pdev, 2690 (dma_addr_t)rxdp3->Buffer2_ptr, 2691 dev->mtu + 4, 2692 PCI_DMA_FROMDEVICE); 2693 memset(rxdp, 0, sizeof(struct RxD3)); 2694 } 2695 swstats->mem_freed += skb->truesize; 2696 dev_kfree_skb(skb); 2697 mac_control->rings[ring_no].rx_bufs_left -= 1; 2698 } 2699 } 2700 2701 /** 2702 * free_rx_buffers - Frees all Rx buffers 2703 * @sp: device private variable. 2704 * Description: 2705 * This function will free all Rx buffers allocated by host. 2706 * Return Value: 2707 * NONE. 2708 */ 2709 2710 static void free_rx_buffers(struct s2io_nic *sp) 2711 { 2712 struct net_device *dev = sp->dev; 2713 int i, blk = 0, buf_cnt = 0; 2714 struct config_param *config = &sp->config; 2715 struct mac_info *mac_control = &sp->mac_control; 2716 2717 for (i = 0; i < config->rx_ring_num; i++) { 2718 struct ring_info *ring = &mac_control->rings[i]; 2719 2720 for (blk = 0; blk < rx_ring_sz[i]; blk++) 2721 free_rxd_blk(sp, i, blk); 2722 2723 ring->rx_curr_put_info.block_index = 0; 2724 ring->rx_curr_get_info.block_index = 0; 2725 ring->rx_curr_put_info.offset = 0; 2726 ring->rx_curr_get_info.offset = 0; 2727 ring->rx_bufs_left = 0; 2728 DBG_PRINT(INIT_DBG, "%s: Freed 0x%x Rx Buffers on ring%d\n", 2729 dev->name, buf_cnt, i); 2730 } 2731 } 2732 2733 static int s2io_chk_rx_buffers(struct s2io_nic *nic, struct ring_info *ring) 2734 { 2735 if (fill_rx_buffers(nic, ring, 0) == -ENOMEM) { 2736 DBG_PRINT(INFO_DBG, "%s: Out of memory in Rx Intr!!\n", 2737 ring->dev->name); 2738 } 2739 return 0; 2740 } 2741 2742 /** 2743 * s2io_poll - Rx interrupt handler for NAPI support 2744 * @napi : pointer to the napi structure. 2745 * @budget : The number of packets that were budgeted to be processed 2746 * during one pass through the 'Poll" function. 2747 * Description: 2748 * Comes into picture only if NAPI support has been incorporated. It does 2749 * the same thing that rx_intr_handler does, but not in a interrupt context 2750 * also It will process only a given number of packets. 2751 * Return value: 2752 * 0 on success and 1 if there are No Rx packets to be processed. 2753 */ 2754 2755 static int s2io_poll_msix(struct napi_struct *napi, int budget) 2756 { 2757 struct ring_info *ring = container_of(napi, struct ring_info, napi); 2758 struct net_device *dev = ring->dev; 2759 int pkts_processed = 0; 2760 u8 __iomem *addr = NULL; 2761 u8 val8 = 0; 2762 struct s2io_nic *nic = netdev_priv(dev); 2763 struct XENA_dev_config __iomem *bar0 = nic->bar0; 2764 int budget_org = budget; 2765 2766 if (unlikely(!is_s2io_card_up(nic))) 2767 return 0; 2768 2769 pkts_processed = rx_intr_handler(ring, budget); 2770 s2io_chk_rx_buffers(nic, ring); 2771 2772 if (pkts_processed < budget_org) { 2773 napi_complete_done(napi, pkts_processed); 2774 /*Re Enable MSI-Rx Vector*/ 2775 addr = (u8 __iomem *)&bar0->xmsi_mask_reg; 2776 addr += 7 - ring->ring_no; 2777 val8 = (ring->ring_no == 0) ? 0x3f : 0xbf; 2778 writeb(val8, addr); 2779 val8 = readb(addr); 2780 } 2781 return pkts_processed; 2782 } 2783 2784 static int s2io_poll_inta(struct napi_struct *napi, int budget) 2785 { 2786 struct s2io_nic *nic = container_of(napi, struct s2io_nic, napi); 2787 int pkts_processed = 0; 2788 int ring_pkts_processed, i; 2789 struct XENA_dev_config __iomem *bar0 = nic->bar0; 2790 int budget_org = budget; 2791 struct config_param *config = &nic->config; 2792 struct mac_info *mac_control = &nic->mac_control; 2793 2794 if (unlikely(!is_s2io_card_up(nic))) 2795 return 0; 2796 2797 for (i = 0; i < config->rx_ring_num; i++) { 2798 struct ring_info *ring = &mac_control->rings[i]; 2799 ring_pkts_processed = rx_intr_handler(ring, budget); 2800 s2io_chk_rx_buffers(nic, ring); 2801 pkts_processed += ring_pkts_processed; 2802 budget -= ring_pkts_processed; 2803 if (budget <= 0) 2804 break; 2805 } 2806 if (pkts_processed < budget_org) { 2807 napi_complete_done(napi, pkts_processed); 2808 /* Re enable the Rx interrupts for the ring */ 2809 writeq(0, &bar0->rx_traffic_mask); 2810 readl(&bar0->rx_traffic_mask); 2811 } 2812 return pkts_processed; 2813 } 2814 2815 #ifdef CONFIG_NET_POLL_CONTROLLER 2816 /** 2817 * s2io_netpoll - netpoll event handler entry point 2818 * @dev : pointer to the device structure. 2819 * Description: 2820 * This function will be called by upper layer to check for events on the 2821 * interface in situations where interrupts are disabled. It is used for 2822 * specific in-kernel networking tasks, such as remote consoles and kernel 2823 * debugging over the network (example netdump in RedHat). 2824 */ 2825 static void s2io_netpoll(struct net_device *dev) 2826 { 2827 struct s2io_nic *nic = netdev_priv(dev); 2828 const int irq = nic->pdev->irq; 2829 struct XENA_dev_config __iomem *bar0 = nic->bar0; 2830 u64 val64 = 0xFFFFFFFFFFFFFFFFULL; 2831 int i; 2832 struct config_param *config = &nic->config; 2833 struct mac_info *mac_control = &nic->mac_control; 2834 2835 if (pci_channel_offline(nic->pdev)) 2836 return; 2837 2838 disable_irq(irq); 2839 2840 writeq(val64, &bar0->rx_traffic_int); 2841 writeq(val64, &bar0->tx_traffic_int); 2842 2843 /* we need to free up the transmitted skbufs or else netpoll will 2844 * run out of skbs and will fail and eventually netpoll application such 2845 * as netdump will fail. 2846 */ 2847 for (i = 0; i < config->tx_fifo_num; i++) 2848 tx_intr_handler(&mac_control->fifos[i]); 2849 2850 /* check for received packet and indicate up to network */ 2851 for (i = 0; i < config->rx_ring_num; i++) { 2852 struct ring_info *ring = &mac_control->rings[i]; 2853 2854 rx_intr_handler(ring, 0); 2855 } 2856 2857 for (i = 0; i < config->rx_ring_num; i++) { 2858 struct ring_info *ring = &mac_control->rings[i]; 2859 2860 if (fill_rx_buffers(nic, ring, 0) == -ENOMEM) { 2861 DBG_PRINT(INFO_DBG, 2862 "%s: Out of memory in Rx Netpoll!!\n", 2863 dev->name); 2864 break; 2865 } 2866 } 2867 enable_irq(irq); 2868 } 2869 #endif 2870 2871 /** 2872 * rx_intr_handler - Rx interrupt handler 2873 * @ring_info: per ring structure. 2874 * @budget: budget for napi processing. 2875 * Description: 2876 * If the interrupt is because of a received frame or if the 2877 * receive ring contains fresh as yet un-processed frames,this function is 2878 * called. It picks out the RxD at which place the last Rx processing had 2879 * stopped and sends the skb to the OSM's Rx handler and then increments 2880 * the offset. 2881 * Return Value: 2882 * No. of napi packets processed. 2883 */ 2884 static int rx_intr_handler(struct ring_info *ring_data, int budget) 2885 { 2886 int get_block, put_block; 2887 struct rx_curr_get_info get_info, put_info; 2888 struct RxD_t *rxdp; 2889 struct sk_buff *skb; 2890 int pkt_cnt = 0, napi_pkts = 0; 2891 int i; 2892 struct RxD1 *rxdp1; 2893 struct RxD3 *rxdp3; 2894 2895 if (budget <= 0) 2896 return napi_pkts; 2897 2898 get_info = ring_data->rx_curr_get_info; 2899 get_block = get_info.block_index; 2900 memcpy(&put_info, &ring_data->rx_curr_put_info, sizeof(put_info)); 2901 put_block = put_info.block_index; 2902 rxdp = ring_data->rx_blocks[get_block].rxds[get_info.offset].virt_addr; 2903 2904 while (RXD_IS_UP2DT(rxdp)) { 2905 /* 2906 * If your are next to put index then it's 2907 * FIFO full condition 2908 */ 2909 if ((get_block == put_block) && 2910 (get_info.offset + 1) == put_info.offset) { 2911 DBG_PRINT(INTR_DBG, "%s: Ring Full\n", 2912 ring_data->dev->name); 2913 break; 2914 } 2915 skb = (struct sk_buff *)((unsigned long)rxdp->Host_Control); 2916 if (skb == NULL) { 2917 DBG_PRINT(ERR_DBG, "%s: NULL skb in Rx Intr\n", 2918 ring_data->dev->name); 2919 return 0; 2920 } 2921 if (ring_data->rxd_mode == RXD_MODE_1) { 2922 rxdp1 = (struct RxD1 *)rxdp; 2923 pci_unmap_single(ring_data->pdev, (dma_addr_t) 2924 rxdp1->Buffer0_ptr, 2925 ring_data->mtu + 2926 HEADER_ETHERNET_II_802_3_SIZE + 2927 HEADER_802_2_SIZE + 2928 HEADER_SNAP_SIZE, 2929 PCI_DMA_FROMDEVICE); 2930 } else if (ring_data->rxd_mode == RXD_MODE_3B) { 2931 rxdp3 = (struct RxD3 *)rxdp; 2932 pci_dma_sync_single_for_cpu(ring_data->pdev, 2933 (dma_addr_t)rxdp3->Buffer0_ptr, 2934 BUF0_LEN, 2935 PCI_DMA_FROMDEVICE); 2936 pci_unmap_single(ring_data->pdev, 2937 (dma_addr_t)rxdp3->Buffer2_ptr, 2938 ring_data->mtu + 4, 2939 PCI_DMA_FROMDEVICE); 2940 } 2941 prefetch(skb->data); 2942 rx_osm_handler(ring_data, rxdp); 2943 get_info.offset++; 2944 ring_data->rx_curr_get_info.offset = get_info.offset; 2945 rxdp = ring_data->rx_blocks[get_block]. 2946 rxds[get_info.offset].virt_addr; 2947 if (get_info.offset == rxd_count[ring_data->rxd_mode]) { 2948 get_info.offset = 0; 2949 ring_data->rx_curr_get_info.offset = get_info.offset; 2950 get_block++; 2951 if (get_block == ring_data->block_count) 2952 get_block = 0; 2953 ring_data->rx_curr_get_info.block_index = get_block; 2954 rxdp = ring_data->rx_blocks[get_block].block_virt_addr; 2955 } 2956 2957 if (ring_data->nic->config.napi) { 2958 budget--; 2959 napi_pkts++; 2960 if (!budget) 2961 break; 2962 } 2963 pkt_cnt++; 2964 if ((indicate_max_pkts) && (pkt_cnt > indicate_max_pkts)) 2965 break; 2966 } 2967 if (ring_data->lro) { 2968 /* Clear all LRO sessions before exiting */ 2969 for (i = 0; i < MAX_LRO_SESSIONS; i++) { 2970 struct lro *lro = &ring_data->lro0_n[i]; 2971 if (lro->in_use) { 2972 update_L3L4_header(ring_data->nic, lro); 2973 queue_rx_frame(lro->parent, lro->vlan_tag); 2974 clear_lro_session(lro); 2975 } 2976 } 2977 } 2978 return napi_pkts; 2979 } 2980 2981 /** 2982 * tx_intr_handler - Transmit interrupt handler 2983 * @nic : device private variable 2984 * Description: 2985 * If an interrupt was raised to indicate DMA complete of the 2986 * Tx packet, this function is called. It identifies the last TxD 2987 * whose buffer was freed and frees all skbs whose data have already 2988 * DMA'ed into the NICs internal memory. 2989 * Return Value: 2990 * NONE 2991 */ 2992 2993 static void tx_intr_handler(struct fifo_info *fifo_data) 2994 { 2995 struct s2io_nic *nic = fifo_data->nic; 2996 struct tx_curr_get_info get_info, put_info; 2997 struct sk_buff *skb = NULL; 2998 struct TxD *txdlp; 2999 int pkt_cnt = 0; 3000 unsigned long flags = 0; 3001 u8 err_mask; 3002 struct stat_block *stats = nic->mac_control.stats_info; 3003 struct swStat *swstats = &stats->sw_stat; 3004 3005 if (!spin_trylock_irqsave(&fifo_data->tx_lock, flags)) 3006 return; 3007 3008 get_info = fifo_data->tx_curr_get_info; 3009 memcpy(&put_info, &fifo_data->tx_curr_put_info, sizeof(put_info)); 3010 txdlp = fifo_data->list_info[get_info.offset].list_virt_addr; 3011 while ((!(txdlp->Control_1 & TXD_LIST_OWN_XENA)) && 3012 (get_info.offset != put_info.offset) && 3013 (txdlp->Host_Control)) { 3014 /* Check for TxD errors */ 3015 if (txdlp->Control_1 & TXD_T_CODE) { 3016 unsigned long long err; 3017 err = txdlp->Control_1 & TXD_T_CODE; 3018 if (err & 0x1) { 3019 swstats->parity_err_cnt++; 3020 } 3021 3022 /* update t_code statistics */ 3023 err_mask = err >> 48; 3024 switch (err_mask) { 3025 case 2: 3026 swstats->tx_buf_abort_cnt++; 3027 break; 3028 3029 case 3: 3030 swstats->tx_desc_abort_cnt++; 3031 break; 3032 3033 case 7: 3034 swstats->tx_parity_err_cnt++; 3035 break; 3036 3037 case 10: 3038 swstats->tx_link_loss_cnt++; 3039 break; 3040 3041 case 15: 3042 swstats->tx_list_proc_err_cnt++; 3043 break; 3044 } 3045 } 3046 3047 skb = s2io_txdl_getskb(fifo_data, txdlp, get_info.offset); 3048 if (skb == NULL) { 3049 spin_unlock_irqrestore(&fifo_data->tx_lock, flags); 3050 DBG_PRINT(ERR_DBG, "%s: NULL skb in Tx Free Intr\n", 3051 __func__); 3052 return; 3053 } 3054 pkt_cnt++; 3055 3056 /* Updating the statistics block */ 3057 swstats->mem_freed += skb->truesize; 3058 dev_kfree_skb_irq(skb); 3059 3060 get_info.offset++; 3061 if (get_info.offset == get_info.fifo_len + 1) 3062 get_info.offset = 0; 3063 txdlp = fifo_data->list_info[get_info.offset].list_virt_addr; 3064 fifo_data->tx_curr_get_info.offset = get_info.offset; 3065 } 3066 3067 s2io_wake_tx_queue(fifo_data, pkt_cnt, nic->config.multiq); 3068 3069 spin_unlock_irqrestore(&fifo_data->tx_lock, flags); 3070 } 3071 3072 /** 3073 * s2io_mdio_write - Function to write in to MDIO registers 3074 * @mmd_type : MMD type value (PMA/PMD/WIS/PCS/PHYXS) 3075 * @addr : address value 3076 * @value : data value 3077 * @dev : pointer to net_device structure 3078 * Description: 3079 * This function is used to write values to the MDIO registers 3080 * NONE 3081 */ 3082 static void s2io_mdio_write(u32 mmd_type, u64 addr, u16 value, 3083 struct net_device *dev) 3084 { 3085 u64 val64; 3086 struct s2io_nic *sp = netdev_priv(dev); 3087 struct XENA_dev_config __iomem *bar0 = sp->bar0; 3088 3089 /* address transaction */ 3090 val64 = MDIO_MMD_INDX_ADDR(addr) | 3091 MDIO_MMD_DEV_ADDR(mmd_type) | 3092 MDIO_MMS_PRT_ADDR(0x0); 3093 writeq(val64, &bar0->mdio_control); 3094 val64 = val64 | MDIO_CTRL_START_TRANS(0xE); 3095 writeq(val64, &bar0->mdio_control); 3096 udelay(100); 3097 3098 /* Data transaction */ 3099 val64 = MDIO_MMD_INDX_ADDR(addr) | 3100 MDIO_MMD_DEV_ADDR(mmd_type) | 3101 MDIO_MMS_PRT_ADDR(0x0) | 3102 MDIO_MDIO_DATA(value) | 3103 MDIO_OP(MDIO_OP_WRITE_TRANS); 3104 writeq(val64, &bar0->mdio_control); 3105 val64 = val64 | MDIO_CTRL_START_TRANS(0xE); 3106 writeq(val64, &bar0->mdio_control); 3107 udelay(100); 3108 3109 val64 = MDIO_MMD_INDX_ADDR(addr) | 3110 MDIO_MMD_DEV_ADDR(mmd_type) | 3111 MDIO_MMS_PRT_ADDR(0x0) | 3112 MDIO_OP(MDIO_OP_READ_TRANS); 3113 writeq(val64, &bar0->mdio_control); 3114 val64 = val64 | MDIO_CTRL_START_TRANS(0xE); 3115 writeq(val64, &bar0->mdio_control); 3116 udelay(100); 3117 } 3118 3119 /** 3120 * s2io_mdio_read - Function to write in to MDIO registers 3121 * @mmd_type : MMD type value (PMA/PMD/WIS/PCS/PHYXS) 3122 * @addr : address value 3123 * @dev : pointer to net_device structure 3124 * Description: 3125 * This function is used to read values to the MDIO registers 3126 * NONE 3127 */ 3128 static u64 s2io_mdio_read(u32 mmd_type, u64 addr, struct net_device *dev) 3129 { 3130 u64 val64 = 0x0; 3131 u64 rval64 = 0x0; 3132 struct s2io_nic *sp = netdev_priv(dev); 3133 struct XENA_dev_config __iomem *bar0 = sp->bar0; 3134 3135 /* address transaction */ 3136 val64 = val64 | (MDIO_MMD_INDX_ADDR(addr) 3137 | MDIO_MMD_DEV_ADDR(mmd_type) 3138 | MDIO_MMS_PRT_ADDR(0x0)); 3139 writeq(val64, &bar0->mdio_control); 3140 val64 = val64 | MDIO_CTRL_START_TRANS(0xE); 3141 writeq(val64, &bar0->mdio_control); 3142 udelay(100); 3143 3144 /* Data transaction */ 3145 val64 = MDIO_MMD_INDX_ADDR(addr) | 3146 MDIO_MMD_DEV_ADDR(mmd_type) | 3147 MDIO_MMS_PRT_ADDR(0x0) | 3148 MDIO_OP(MDIO_OP_READ_TRANS); 3149 writeq(val64, &bar0->mdio_control); 3150 val64 = val64 | MDIO_CTRL_START_TRANS(0xE); 3151 writeq(val64, &bar0->mdio_control); 3152 udelay(100); 3153 3154 /* Read the value from regs */ 3155 rval64 = readq(&bar0->mdio_control); 3156 rval64 = rval64 & 0xFFFF0000; 3157 rval64 = rval64 >> 16; 3158 return rval64; 3159 } 3160 3161 /** 3162 * s2io_chk_xpak_counter - Function to check the status of the xpak counters 3163 * @counter : counter value to be updated 3164 * @flag : flag to indicate the status 3165 * @type : counter type 3166 * Description: 3167 * This function is to check the status of the xpak counters value 3168 * NONE 3169 */ 3170 3171 static void s2io_chk_xpak_counter(u64 *counter, u64 * regs_stat, u32 index, 3172 u16 flag, u16 type) 3173 { 3174 u64 mask = 0x3; 3175 u64 val64; 3176 int i; 3177 for (i = 0; i < index; i++) 3178 mask = mask << 0x2; 3179 3180 if (flag > 0) { 3181 *counter = *counter + 1; 3182 val64 = *regs_stat & mask; 3183 val64 = val64 >> (index * 0x2); 3184 val64 = val64 + 1; 3185 if (val64 == 3) { 3186 switch (type) { 3187 case 1: 3188 DBG_PRINT(ERR_DBG, 3189 "Take Xframe NIC out of service.\n"); 3190 DBG_PRINT(ERR_DBG, 3191 "Excessive temperatures may result in premature transceiver failure.\n"); 3192 break; 3193 case 2: 3194 DBG_PRINT(ERR_DBG, 3195 "Take Xframe NIC out of service.\n"); 3196 DBG_PRINT(ERR_DBG, 3197 "Excessive bias currents may indicate imminent laser diode failure.\n"); 3198 break; 3199 case 3: 3200 DBG_PRINT(ERR_DBG, 3201 "Take Xframe NIC out of service.\n"); 3202 DBG_PRINT(ERR_DBG, 3203 "Excessive laser output power may saturate far-end receiver.\n"); 3204 break; 3205 default: 3206 DBG_PRINT(ERR_DBG, 3207 "Incorrect XPAK Alarm type\n"); 3208 } 3209 val64 = 0x0; 3210 } 3211 val64 = val64 << (index * 0x2); 3212 *regs_stat = (*regs_stat & (~mask)) | (val64); 3213 3214 } else { 3215 *regs_stat = *regs_stat & (~mask); 3216 } 3217 } 3218 3219 /** 3220 * s2io_updt_xpak_counter - Function to update the xpak counters 3221 * @dev : pointer to net_device struct 3222 * Description: 3223 * This function is to upate the status of the xpak counters value 3224 * NONE 3225 */ 3226 static void s2io_updt_xpak_counter(struct net_device *dev) 3227 { 3228 u16 flag = 0x0; 3229 u16 type = 0x0; 3230 u16 val16 = 0x0; 3231 u64 val64 = 0x0; 3232 u64 addr = 0x0; 3233 3234 struct s2io_nic *sp = netdev_priv(dev); 3235 struct stat_block *stats = sp->mac_control.stats_info; 3236 struct xpakStat *xstats = &stats->xpak_stat; 3237 3238 /* Check the communication with the MDIO slave */ 3239 addr = MDIO_CTRL1; 3240 val64 = 0x0; 3241 val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev); 3242 if ((val64 == 0xFFFF) || (val64 == 0x0000)) { 3243 DBG_PRINT(ERR_DBG, 3244 "ERR: MDIO slave access failed - Returned %llx\n", 3245 (unsigned long long)val64); 3246 return; 3247 } 3248 3249 /* Check for the expected value of control reg 1 */ 3250 if (val64 != MDIO_CTRL1_SPEED10G) { 3251 DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - " 3252 "Returned: %llx- Expected: 0x%x\n", 3253 (unsigned long long)val64, MDIO_CTRL1_SPEED10G); 3254 return; 3255 } 3256 3257 /* Loading the DOM register to MDIO register */ 3258 addr = 0xA100; 3259 s2io_mdio_write(MDIO_MMD_PMAPMD, addr, val16, dev); 3260 val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev); 3261 3262 /* Reading the Alarm flags */ 3263 addr = 0xA070; 3264 val64 = 0x0; 3265 val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev); 3266 3267 flag = CHECKBIT(val64, 0x7); 3268 type = 1; 3269 s2io_chk_xpak_counter(&xstats->alarm_transceiver_temp_high, 3270 &xstats->xpak_regs_stat, 3271 0x0, flag, type); 3272 3273 if (CHECKBIT(val64, 0x6)) 3274 xstats->alarm_transceiver_temp_low++; 3275 3276 flag = CHECKBIT(val64, 0x3); 3277 type = 2; 3278 s2io_chk_xpak_counter(&xstats->alarm_laser_bias_current_high, 3279 &xstats->xpak_regs_stat, 3280 0x2, flag, type); 3281 3282 if (CHECKBIT(val64, 0x2)) 3283 xstats->alarm_laser_bias_current_low++; 3284 3285 flag = CHECKBIT(val64, 0x1); 3286 type = 3; 3287 s2io_chk_xpak_counter(&xstats->alarm_laser_output_power_high, 3288 &xstats->xpak_regs_stat, 3289 0x4, flag, type); 3290 3291 if (CHECKBIT(val64, 0x0)) 3292 xstats->alarm_laser_output_power_low++; 3293 3294 /* Reading the Warning flags */ 3295 addr = 0xA074; 3296 val64 = 0x0; 3297 val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev); 3298 3299 if (CHECKBIT(val64, 0x7)) 3300 xstats->warn_transceiver_temp_high++; 3301 3302 if (CHECKBIT(val64, 0x6)) 3303 xstats->warn_transceiver_temp_low++; 3304 3305 if (CHECKBIT(val64, 0x3)) 3306 xstats->warn_laser_bias_current_high++; 3307 3308 if (CHECKBIT(val64, 0x2)) 3309 xstats->warn_laser_bias_current_low++; 3310 3311 if (CHECKBIT(val64, 0x1)) 3312 xstats->warn_laser_output_power_high++; 3313 3314 if (CHECKBIT(val64, 0x0)) 3315 xstats->warn_laser_output_power_low++; 3316 } 3317 3318 /** 3319 * wait_for_cmd_complete - waits for a command to complete. 3320 * @sp : private member of the device structure, which is a pointer to the 3321 * s2io_nic structure. 3322 * Description: Function that waits for a command to Write into RMAC 3323 * ADDR DATA registers to be completed and returns either success or 3324 * error depending on whether the command was complete or not. 3325 * Return value: 3326 * SUCCESS on success and FAILURE on failure. 3327 */ 3328 3329 static int wait_for_cmd_complete(void __iomem *addr, u64 busy_bit, 3330 int bit_state) 3331 { 3332 int ret = FAILURE, cnt = 0, delay = 1; 3333 u64 val64; 3334 3335 if ((bit_state != S2IO_BIT_RESET) && (bit_state != S2IO_BIT_SET)) 3336 return FAILURE; 3337 3338 do { 3339 val64 = readq(addr); 3340 if (bit_state == S2IO_BIT_RESET) { 3341 if (!(val64 & busy_bit)) { 3342 ret = SUCCESS; 3343 break; 3344 } 3345 } else { 3346 if (val64 & busy_bit) { 3347 ret = SUCCESS; 3348 break; 3349 } 3350 } 3351 3352 if (in_interrupt()) 3353 mdelay(delay); 3354 else 3355 msleep(delay); 3356 3357 if (++cnt >= 10) 3358 delay = 50; 3359 } while (cnt < 20); 3360 return ret; 3361 } 3362 /** 3363 * check_pci_device_id - Checks if the device id is supported 3364 * @id : device id 3365 * Description: Function to check if the pci device id is supported by driver. 3366 * Return value: Actual device id if supported else PCI_ANY_ID 3367 */ 3368 static u16 check_pci_device_id(u16 id) 3369 { 3370 switch (id) { 3371 case PCI_DEVICE_ID_HERC_WIN: 3372 case PCI_DEVICE_ID_HERC_UNI: 3373 return XFRAME_II_DEVICE; 3374 case PCI_DEVICE_ID_S2IO_UNI: 3375 case PCI_DEVICE_ID_S2IO_WIN: 3376 return XFRAME_I_DEVICE; 3377 default: 3378 return PCI_ANY_ID; 3379 } 3380 } 3381 3382 /** 3383 * s2io_reset - Resets the card. 3384 * @sp : private member of the device structure. 3385 * Description: Function to Reset the card. This function then also 3386 * restores the previously saved PCI configuration space registers as 3387 * the card reset also resets the configuration space. 3388 * Return value: 3389 * void. 3390 */ 3391 3392 static void s2io_reset(struct s2io_nic *sp) 3393 { 3394 struct XENA_dev_config __iomem *bar0 = sp->bar0; 3395 u64 val64; 3396 u16 subid, pci_cmd; 3397 int i; 3398 u16 val16; 3399 unsigned long long up_cnt, down_cnt, up_time, down_time, reset_cnt; 3400 unsigned long long mem_alloc_cnt, mem_free_cnt, watchdog_cnt; 3401 struct stat_block *stats; 3402 struct swStat *swstats; 3403 3404 DBG_PRINT(INIT_DBG, "%s: Resetting XFrame card %s\n", 3405 __func__, pci_name(sp->pdev)); 3406 3407 /* Back up the PCI-X CMD reg, dont want to lose MMRBC, OST settings */ 3408 pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd)); 3409 3410 val64 = SW_RESET_ALL; 3411 writeq(val64, &bar0->sw_reset); 3412 if (strstr(sp->product_name, "CX4")) 3413 msleep(750); 3414 msleep(250); 3415 for (i = 0; i < S2IO_MAX_PCI_CONFIG_SPACE_REINIT; i++) { 3416 3417 /* Restore the PCI state saved during initialization. */ 3418 pci_restore_state(sp->pdev); 3419 pci_save_state(sp->pdev); 3420 pci_read_config_word(sp->pdev, 0x2, &val16); 3421 if (check_pci_device_id(val16) != (u16)PCI_ANY_ID) 3422 break; 3423 msleep(200); 3424 } 3425 3426 if (check_pci_device_id(val16) == (u16)PCI_ANY_ID) 3427 DBG_PRINT(ERR_DBG, "%s SW_Reset failed!\n", __func__); 3428 3429 pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, pci_cmd); 3430 3431 s2io_init_pci(sp); 3432 3433 /* Set swapper to enable I/O register access */ 3434 s2io_set_swapper(sp); 3435 3436 /* restore mac_addr entries */ 3437 do_s2io_restore_unicast_mc(sp); 3438 3439 /* Restore the MSIX table entries from local variables */ 3440 restore_xmsi_data(sp); 3441 3442 /* Clear certain PCI/PCI-X fields after reset */ 3443 if (sp->device_type == XFRAME_II_DEVICE) { 3444 /* Clear "detected parity error" bit */ 3445 pci_write_config_word(sp->pdev, PCI_STATUS, 0x8000); 3446 3447 /* Clearing PCIX Ecc status register */ 3448 pci_write_config_dword(sp->pdev, 0x68, 0x7C); 3449 3450 /* Clearing PCI_STATUS error reflected here */ 3451 writeq(s2BIT(62), &bar0->txpic_int_reg); 3452 } 3453 3454 /* Reset device statistics maintained by OS */ 3455 memset(&sp->stats, 0, sizeof(struct net_device_stats)); 3456 3457 stats = sp->mac_control.stats_info; 3458 swstats = &stats->sw_stat; 3459 3460 /* save link up/down time/cnt, reset/memory/watchdog cnt */ 3461 up_cnt = swstats->link_up_cnt; 3462 down_cnt = swstats->link_down_cnt; 3463 up_time = swstats->link_up_time; 3464 down_time = swstats->link_down_time; 3465 reset_cnt = swstats->soft_reset_cnt; 3466 mem_alloc_cnt = swstats->mem_allocated; 3467 mem_free_cnt = swstats->mem_freed; 3468 watchdog_cnt = swstats->watchdog_timer_cnt; 3469 3470 memset(stats, 0, sizeof(struct stat_block)); 3471 3472 /* restore link up/down time/cnt, reset/memory/watchdog cnt */ 3473 swstats->link_up_cnt = up_cnt; 3474 swstats->link_down_cnt = down_cnt; 3475 swstats->link_up_time = up_time; 3476 swstats->link_down_time = down_time; 3477 swstats->soft_reset_cnt = reset_cnt; 3478 swstats->mem_allocated = mem_alloc_cnt; 3479 swstats->mem_freed = mem_free_cnt; 3480 swstats->watchdog_timer_cnt = watchdog_cnt; 3481 3482 /* SXE-002: Configure link and activity LED to turn it off */ 3483 subid = sp->pdev->subsystem_device; 3484 if (((subid & 0xFF) >= 0x07) && 3485 (sp->device_type == XFRAME_I_DEVICE)) { 3486 val64 = readq(&bar0->gpio_control); 3487 val64 |= 0x0000800000000000ULL; 3488 writeq(val64, &bar0->gpio_control); 3489 val64 = 0x0411040400000000ULL; 3490 writeq(val64, (void __iomem *)bar0 + 0x2700); 3491 } 3492 3493 /* 3494 * Clear spurious ECC interrupts that would have occurred on 3495 * XFRAME II cards after reset. 3496 */ 3497 if (sp->device_type == XFRAME_II_DEVICE) { 3498 val64 = readq(&bar0->pcc_err_reg); 3499 writeq(val64, &bar0->pcc_err_reg); 3500 } 3501 3502 sp->device_enabled_once = false; 3503 } 3504 3505 /** 3506 * s2io_set_swapper - to set the swapper controle on the card 3507 * @sp : private member of the device structure, 3508 * pointer to the s2io_nic structure. 3509 * Description: Function to set the swapper control on the card 3510 * correctly depending on the 'endianness' of the system. 3511 * Return value: 3512 * SUCCESS on success and FAILURE on failure. 3513 */ 3514 3515 static int s2io_set_swapper(struct s2io_nic *sp) 3516 { 3517 struct net_device *dev = sp->dev; 3518 struct XENA_dev_config __iomem *bar0 = sp->bar0; 3519 u64 val64, valt, valr; 3520 3521 /* 3522 * Set proper endian settings and verify the same by reading 3523 * the PIF Feed-back register. 3524 */ 3525 3526 val64 = readq(&bar0->pif_rd_swapper_fb); 3527 if (val64 != 0x0123456789ABCDEFULL) { 3528 int i = 0; 3529 static const u64 value[] = { 3530 0xC30000C3C30000C3ULL, /* FE=1, SE=1 */ 3531 0x8100008181000081ULL, /* FE=1, SE=0 */ 3532 0x4200004242000042ULL, /* FE=0, SE=1 */ 3533 0 /* FE=0, SE=0 */ 3534 }; 3535 3536 while (i < 4) { 3537 writeq(value[i], &bar0->swapper_ctrl); 3538 val64 = readq(&bar0->pif_rd_swapper_fb); 3539 if (val64 == 0x0123456789ABCDEFULL) 3540 break; 3541 i++; 3542 } 3543 if (i == 4) { 3544 DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, " 3545 "feedback read %llx\n", 3546 dev->name, (unsigned long long)val64); 3547 return FAILURE; 3548 } 3549 valr = value[i]; 3550 } else { 3551 valr = readq(&bar0->swapper_ctrl); 3552 } 3553 3554 valt = 0x0123456789ABCDEFULL; 3555 writeq(valt, &bar0->xmsi_address); 3556 val64 = readq(&bar0->xmsi_address); 3557 3558 if (val64 != valt) { 3559 int i = 0; 3560 static const u64 value[] = { 3561 0x00C3C30000C3C300ULL, /* FE=1, SE=1 */ 3562 0x0081810000818100ULL, /* FE=1, SE=0 */ 3563 0x0042420000424200ULL, /* FE=0, SE=1 */ 3564 0 /* FE=0, SE=0 */ 3565 }; 3566 3567 while (i < 4) { 3568 writeq((value[i] | valr), &bar0->swapper_ctrl); 3569 writeq(valt, &bar0->xmsi_address); 3570 val64 = readq(&bar0->xmsi_address); 3571 if (val64 == valt) 3572 break; 3573 i++; 3574 } 3575 if (i == 4) { 3576 unsigned long long x = val64; 3577 DBG_PRINT(ERR_DBG, 3578 "Write failed, Xmsi_addr reads:0x%llx\n", x); 3579 return FAILURE; 3580 } 3581 } 3582 val64 = readq(&bar0->swapper_ctrl); 3583 val64 &= 0xFFFF000000000000ULL; 3584 3585 #ifdef __BIG_ENDIAN 3586 /* 3587 * The device by default set to a big endian format, so a 3588 * big endian driver need not set anything. 3589 */ 3590 val64 |= (SWAPPER_CTRL_TXP_FE | 3591 SWAPPER_CTRL_TXP_SE | 3592 SWAPPER_CTRL_TXD_R_FE | 3593 SWAPPER_CTRL_TXD_W_FE | 3594 SWAPPER_CTRL_TXF_R_FE | 3595 SWAPPER_CTRL_RXD_R_FE | 3596 SWAPPER_CTRL_RXD_W_FE | 3597 SWAPPER_CTRL_RXF_W_FE | 3598 SWAPPER_CTRL_XMSI_FE | 3599 SWAPPER_CTRL_STATS_FE | 3600 SWAPPER_CTRL_STATS_SE); 3601 if (sp->config.intr_type == INTA) 3602 val64 |= SWAPPER_CTRL_XMSI_SE; 3603 writeq(val64, &bar0->swapper_ctrl); 3604 #else 3605 /* 3606 * Initially we enable all bits to make it accessible by the 3607 * driver, then we selectively enable only those bits that 3608 * we want to set. 3609 */ 3610 val64 |= (SWAPPER_CTRL_TXP_FE | 3611 SWAPPER_CTRL_TXP_SE | 3612 SWAPPER_CTRL_TXD_R_FE | 3613 SWAPPER_CTRL_TXD_R_SE | 3614 SWAPPER_CTRL_TXD_W_FE | 3615 SWAPPER_CTRL_TXD_W_SE | 3616 SWAPPER_CTRL_TXF_R_FE | 3617 SWAPPER_CTRL_RXD_R_FE | 3618 SWAPPER_CTRL_RXD_R_SE | 3619 SWAPPER_CTRL_RXD_W_FE | 3620 SWAPPER_CTRL_RXD_W_SE | 3621 SWAPPER_CTRL_RXF_W_FE | 3622 SWAPPER_CTRL_XMSI_FE | 3623 SWAPPER_CTRL_STATS_FE | 3624 SWAPPER_CTRL_STATS_SE); 3625 if (sp->config.intr_type == INTA) 3626 val64 |= SWAPPER_CTRL_XMSI_SE; 3627 writeq(val64, &bar0->swapper_ctrl); 3628 #endif 3629 val64 = readq(&bar0->swapper_ctrl); 3630 3631 /* 3632 * Verifying if endian settings are accurate by reading a 3633 * feedback register. 3634 */ 3635 val64 = readq(&bar0->pif_rd_swapper_fb); 3636 if (val64 != 0x0123456789ABCDEFULL) { 3637 /* Endian settings are incorrect, calls for another dekko. */ 3638 DBG_PRINT(ERR_DBG, 3639 "%s: Endian settings are wrong, feedback read %llx\n", 3640 dev->name, (unsigned long long)val64); 3641 return FAILURE; 3642 } 3643 3644 return SUCCESS; 3645 } 3646 3647 static int wait_for_msix_trans(struct s2io_nic *nic, int i) 3648 { 3649 struct XENA_dev_config __iomem *bar0 = nic->bar0; 3650 u64 val64; 3651 int ret = 0, cnt = 0; 3652 3653 do { 3654 val64 = readq(&bar0->xmsi_access); 3655 if (!(val64 & s2BIT(15))) 3656 break; 3657 mdelay(1); 3658 cnt++; 3659 } while (cnt < 5); 3660 if (cnt == 5) { 3661 DBG_PRINT(ERR_DBG, "XMSI # %d Access failed\n", i); 3662 ret = 1; 3663 } 3664 3665 return ret; 3666 } 3667 3668 static void restore_xmsi_data(struct s2io_nic *nic) 3669 { 3670 struct XENA_dev_config __iomem *bar0 = nic->bar0; 3671 u64 val64; 3672 int i, msix_index; 3673 3674 if (nic->device_type == XFRAME_I_DEVICE) 3675 return; 3676 3677 for (i = 0; i < MAX_REQUESTED_MSI_X; i++) { 3678 msix_index = (i) ? ((i-1) * 8 + 1) : 0; 3679 writeq(nic->msix_info[i].addr, &bar0->xmsi_address); 3680 writeq(nic->msix_info[i].data, &bar0->xmsi_data); 3681 val64 = (s2BIT(7) | s2BIT(15) | vBIT(msix_index, 26, 6)); 3682 writeq(val64, &bar0->xmsi_access); 3683 if (wait_for_msix_trans(nic, msix_index)) 3684 DBG_PRINT(ERR_DBG, "%s: index: %d failed\n", 3685 __func__, msix_index); 3686 } 3687 } 3688 3689 static void store_xmsi_data(struct s2io_nic *nic) 3690 { 3691 struct XENA_dev_config __iomem *bar0 = nic->bar0; 3692 u64 val64, addr, data; 3693 int i, msix_index; 3694 3695 if (nic->device_type == XFRAME_I_DEVICE) 3696 return; 3697 3698 /* Store and display */ 3699 for (i = 0; i < MAX_REQUESTED_MSI_X; i++) { 3700 msix_index = (i) ? ((i-1) * 8 + 1) : 0; 3701 val64 = (s2BIT(15) | vBIT(msix_index, 26, 6)); 3702 writeq(val64, &bar0->xmsi_access); 3703 if (wait_for_msix_trans(nic, msix_index)) { 3704 DBG_PRINT(ERR_DBG, "%s: index: %d failed\n", 3705 __func__, msix_index); 3706 continue; 3707 } 3708 addr = readq(&bar0->xmsi_address); 3709 data = readq(&bar0->xmsi_data); 3710 if (addr && data) { 3711 nic->msix_info[i].addr = addr; 3712 nic->msix_info[i].data = data; 3713 } 3714 } 3715 } 3716 3717 static int s2io_enable_msi_x(struct s2io_nic *nic) 3718 { 3719 struct XENA_dev_config __iomem *bar0 = nic->bar0; 3720 u64 rx_mat; 3721 u16 msi_control; /* Temp variable */ 3722 int ret, i, j, msix_indx = 1; 3723 int size; 3724 struct stat_block *stats = nic->mac_control.stats_info; 3725 struct swStat *swstats = &stats->sw_stat; 3726 3727 size = nic->num_entries * sizeof(struct msix_entry); 3728 nic->entries = kzalloc(size, GFP_KERNEL); 3729 if (!nic->entries) { 3730 DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", 3731 __func__); 3732 swstats->mem_alloc_fail_cnt++; 3733 return -ENOMEM; 3734 } 3735 swstats->mem_allocated += size; 3736 3737 size = nic->num_entries * sizeof(struct s2io_msix_entry); 3738 nic->s2io_entries = kzalloc(size, GFP_KERNEL); 3739 if (!nic->s2io_entries) { 3740 DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", 3741 __func__); 3742 swstats->mem_alloc_fail_cnt++; 3743 kfree(nic->entries); 3744 swstats->mem_freed 3745 += (nic->num_entries * sizeof(struct msix_entry)); 3746 return -ENOMEM; 3747 } 3748 swstats->mem_allocated += size; 3749 3750 nic->entries[0].entry = 0; 3751 nic->s2io_entries[0].entry = 0; 3752 nic->s2io_entries[0].in_use = MSIX_FLG; 3753 nic->s2io_entries[0].type = MSIX_ALARM_TYPE; 3754 nic->s2io_entries[0].arg = &nic->mac_control.fifos; 3755 3756 for (i = 1; i < nic->num_entries; i++) { 3757 nic->entries[i].entry = ((i - 1) * 8) + 1; 3758 nic->s2io_entries[i].entry = ((i - 1) * 8) + 1; 3759 nic->s2io_entries[i].arg = NULL; 3760 nic->s2io_entries[i].in_use = 0; 3761 } 3762 3763 rx_mat = readq(&bar0->rx_mat); 3764 for (j = 0; j < nic->config.rx_ring_num; j++) { 3765 rx_mat |= RX_MAT_SET(j, msix_indx); 3766 nic->s2io_entries[j+1].arg = &nic->mac_control.rings[j]; 3767 nic->s2io_entries[j+1].type = MSIX_RING_TYPE; 3768 nic->s2io_entries[j+1].in_use = MSIX_FLG; 3769 msix_indx += 8; 3770 } 3771 writeq(rx_mat, &bar0->rx_mat); 3772 readq(&bar0->rx_mat); 3773 3774 ret = pci_enable_msix_range(nic->pdev, nic->entries, 3775 nic->num_entries, nic->num_entries); 3776 /* We fail init if error or we get less vectors than min required */ 3777 if (ret < 0) { 3778 DBG_PRINT(ERR_DBG, "Enabling MSI-X failed\n"); 3779 kfree(nic->entries); 3780 swstats->mem_freed += nic->num_entries * 3781 sizeof(struct msix_entry); 3782 kfree(nic->s2io_entries); 3783 swstats->mem_freed += nic->num_entries * 3784 sizeof(struct s2io_msix_entry); 3785 nic->entries = NULL; 3786 nic->s2io_entries = NULL; 3787 return -ENOMEM; 3788 } 3789 3790 /* 3791 * To enable MSI-X, MSI also needs to be enabled, due to a bug 3792 * in the herc NIC. (Temp change, needs to be removed later) 3793 */ 3794 pci_read_config_word(nic->pdev, 0x42, &msi_control); 3795 msi_control |= 0x1; /* Enable MSI */ 3796 pci_write_config_word(nic->pdev, 0x42, msi_control); 3797 3798 return 0; 3799 } 3800 3801 /* Handle software interrupt used during MSI(X) test */ 3802 static irqreturn_t s2io_test_intr(int irq, void *dev_id) 3803 { 3804 struct s2io_nic *sp = dev_id; 3805 3806 sp->msi_detected = 1; 3807 wake_up(&sp->msi_wait); 3808 3809 return IRQ_HANDLED; 3810 } 3811 3812 /* Test interrupt path by forcing a a software IRQ */ 3813 static int s2io_test_msi(struct s2io_nic *sp) 3814 { 3815 struct pci_dev *pdev = sp->pdev; 3816 struct XENA_dev_config __iomem *bar0 = sp->bar0; 3817 int err; 3818 u64 val64, saved64; 3819 3820 err = request_irq(sp->entries[1].vector, s2io_test_intr, 0, 3821 sp->name, sp); 3822 if (err) { 3823 DBG_PRINT(ERR_DBG, "%s: PCI %s: cannot assign irq %d\n", 3824 sp->dev->name, pci_name(pdev), pdev->irq); 3825 return err; 3826 } 3827 3828 init_waitqueue_head(&sp->msi_wait); 3829 sp->msi_detected = 0; 3830 3831 saved64 = val64 = readq(&bar0->scheduled_int_ctrl); 3832 val64 |= SCHED_INT_CTRL_ONE_SHOT; 3833 val64 |= SCHED_INT_CTRL_TIMER_EN; 3834 val64 |= SCHED_INT_CTRL_INT2MSI(1); 3835 writeq(val64, &bar0->scheduled_int_ctrl); 3836 3837 wait_event_timeout(sp->msi_wait, sp->msi_detected, HZ/10); 3838 3839 if (!sp->msi_detected) { 3840 /* MSI(X) test failed, go back to INTx mode */ 3841 DBG_PRINT(ERR_DBG, "%s: PCI %s: No interrupt was generated " 3842 "using MSI(X) during test\n", 3843 sp->dev->name, pci_name(pdev)); 3844 3845 err = -EOPNOTSUPP; 3846 } 3847 3848 free_irq(sp->entries[1].vector, sp); 3849 3850 writeq(saved64, &bar0->scheduled_int_ctrl); 3851 3852 return err; 3853 } 3854 3855 static void remove_msix_isr(struct s2io_nic *sp) 3856 { 3857 int i; 3858 u16 msi_control; 3859 3860 for (i = 0; i < sp->num_entries; i++) { 3861 if (sp->s2io_entries[i].in_use == MSIX_REGISTERED_SUCCESS) { 3862 int vector = sp->entries[i].vector; 3863 void *arg = sp->s2io_entries[i].arg; 3864 free_irq(vector, arg); 3865 } 3866 } 3867 3868 kfree(sp->entries); 3869 kfree(sp->s2io_entries); 3870 sp->entries = NULL; 3871 sp->s2io_entries = NULL; 3872 3873 pci_read_config_word(sp->pdev, 0x42, &msi_control); 3874 msi_control &= 0xFFFE; /* Disable MSI */ 3875 pci_write_config_word(sp->pdev, 0x42, msi_control); 3876 3877 pci_disable_msix(sp->pdev); 3878 } 3879 3880 static void remove_inta_isr(struct s2io_nic *sp) 3881 { 3882 free_irq(sp->pdev->irq, sp->dev); 3883 } 3884 3885 /* ********************************************************* * 3886 * Functions defined below concern the OS part of the driver * 3887 * ********************************************************* */ 3888 3889 /** 3890 * s2io_open - open entry point of the driver 3891 * @dev : pointer to the device structure. 3892 * Description: 3893 * This function is the open entry point of the driver. It mainly calls a 3894 * function to allocate Rx buffers and inserts them into the buffer 3895 * descriptors and then enables the Rx part of the NIC. 3896 * Return value: 3897 * 0 on success and an appropriate (-)ve integer as defined in errno.h 3898 * file on failure. 3899 */ 3900 3901 static int s2io_open(struct net_device *dev) 3902 { 3903 struct s2io_nic *sp = netdev_priv(dev); 3904 struct swStat *swstats = &sp->mac_control.stats_info->sw_stat; 3905 int err = 0; 3906 3907 /* 3908 * Make sure you have link off by default every time 3909 * Nic is initialized 3910 */ 3911 netif_carrier_off(dev); 3912 sp->last_link_state = 0; 3913 3914 /* Initialize H/W and enable interrupts */ 3915 err = s2io_card_up(sp); 3916 if (err) { 3917 DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n", 3918 dev->name); 3919 goto hw_init_failed; 3920 } 3921 3922 if (do_s2io_prog_unicast(dev, dev->dev_addr) == FAILURE) { 3923 DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n"); 3924 s2io_card_down(sp); 3925 err = -ENODEV; 3926 goto hw_init_failed; 3927 } 3928 s2io_start_all_tx_queue(sp); 3929 return 0; 3930 3931 hw_init_failed: 3932 if (sp->config.intr_type == MSI_X) { 3933 if (sp->entries) { 3934 kfree(sp->entries); 3935 swstats->mem_freed += sp->num_entries * 3936 sizeof(struct msix_entry); 3937 } 3938 if (sp->s2io_entries) { 3939 kfree(sp->s2io_entries); 3940 swstats->mem_freed += sp->num_entries * 3941 sizeof(struct s2io_msix_entry); 3942 } 3943 } 3944 return err; 3945 } 3946 3947 /** 3948 * s2io_close -close entry point of the driver 3949 * @dev : device pointer. 3950 * Description: 3951 * This is the stop entry point of the driver. It needs to undo exactly 3952 * whatever was done by the open entry point,thus it's usually referred to 3953 * as the close function.Among other things this function mainly stops the 3954 * Rx side of the NIC and frees all the Rx buffers in the Rx rings. 3955 * Return value: 3956 * 0 on success and an appropriate (-)ve integer as defined in errno.h 3957 * file on failure. 3958 */ 3959 3960 static int s2io_close(struct net_device *dev) 3961 { 3962 struct s2io_nic *sp = netdev_priv(dev); 3963 struct config_param *config = &sp->config; 3964 u64 tmp64; 3965 int offset; 3966 3967 /* Return if the device is already closed * 3968 * Can happen when s2io_card_up failed in change_mtu * 3969 */ 3970 if (!is_s2io_card_up(sp)) 3971 return 0; 3972 3973 s2io_stop_all_tx_queue(sp); 3974 /* delete all populated mac entries */ 3975 for (offset = 1; offset < config->max_mc_addr; offset++) { 3976 tmp64 = do_s2io_read_unicast_mc(sp, offset); 3977 if (tmp64 != S2IO_DISABLE_MAC_ENTRY) 3978 do_s2io_delete_unicast_mc(sp, tmp64); 3979 } 3980 3981 s2io_card_down(sp); 3982 3983 return 0; 3984 } 3985 3986 /** 3987 * s2io_xmit - Tx entry point of te driver 3988 * @skb : the socket buffer containing the Tx data. 3989 * @dev : device pointer. 3990 * Description : 3991 * This function is the Tx entry point of the driver. S2IO NIC supports 3992 * certain protocol assist features on Tx side, namely CSO, S/G, LSO. 3993 * NOTE: when device can't queue the pkt,just the trans_start variable will 3994 * not be upadted. 3995 * Return value: 3996 * 0 on success & 1 on failure. 3997 */ 3998 3999 static netdev_tx_t s2io_xmit(struct sk_buff *skb, struct net_device *dev) 4000 { 4001 struct s2io_nic *sp = netdev_priv(dev); 4002 u16 frg_cnt, frg_len, i, queue, queue_len, put_off, get_off; 4003 register u64 val64; 4004 struct TxD *txdp; 4005 struct TxFIFO_element __iomem *tx_fifo; 4006 unsigned long flags = 0; 4007 u16 vlan_tag = 0; 4008 struct fifo_info *fifo = NULL; 4009 int offload_type; 4010 int enable_per_list_interrupt = 0; 4011 struct config_param *config = &sp->config; 4012 struct mac_info *mac_control = &sp->mac_control; 4013 struct stat_block *stats = mac_control->stats_info; 4014 struct swStat *swstats = &stats->sw_stat; 4015 4016 DBG_PRINT(TX_DBG, "%s: In Neterion Tx routine\n", dev->name); 4017 4018 if (unlikely(skb->len <= 0)) { 4019 DBG_PRINT(TX_DBG, "%s: Buffer has no data..\n", dev->name); 4020 dev_kfree_skb_any(skb); 4021 return NETDEV_TX_OK; 4022 } 4023 4024 if (!is_s2io_card_up(sp)) { 4025 DBG_PRINT(TX_DBG, "%s: Card going down for reset\n", 4026 dev->name); 4027 dev_kfree_skb_any(skb); 4028 return NETDEV_TX_OK; 4029 } 4030 4031 queue = 0; 4032 if (skb_vlan_tag_present(skb)) 4033 vlan_tag = skb_vlan_tag_get(skb); 4034 if (sp->config.tx_steering_type == TX_DEFAULT_STEERING) { 4035 if (skb->protocol == htons(ETH_P_IP)) { 4036 struct iphdr *ip; 4037 struct tcphdr *th; 4038 ip = ip_hdr(skb); 4039 4040 if (!ip_is_fragment(ip)) { 4041 th = (struct tcphdr *)(((unsigned char *)ip) + 4042 ip->ihl*4); 4043 4044 if (ip->protocol == IPPROTO_TCP) { 4045 queue_len = sp->total_tcp_fifos; 4046 queue = (ntohs(th->source) + 4047 ntohs(th->dest)) & 4048 sp->fifo_selector[queue_len - 1]; 4049 if (queue >= queue_len) 4050 queue = queue_len - 1; 4051 } else if (ip->protocol == IPPROTO_UDP) { 4052 queue_len = sp->total_udp_fifos; 4053 queue = (ntohs(th->source) + 4054 ntohs(th->dest)) & 4055 sp->fifo_selector[queue_len - 1]; 4056 if (queue >= queue_len) 4057 queue = queue_len - 1; 4058 queue += sp->udp_fifo_idx; 4059 if (skb->len > 1024) 4060 enable_per_list_interrupt = 1; 4061 } 4062 } 4063 } 4064 } else if (sp->config.tx_steering_type == TX_PRIORITY_STEERING) 4065 /* get fifo number based on skb->priority value */ 4066 queue = config->fifo_mapping 4067 [skb->priority & (MAX_TX_FIFOS - 1)]; 4068 fifo = &mac_control->fifos[queue]; 4069 4070 spin_lock_irqsave(&fifo->tx_lock, flags); 4071 4072 if (sp->config.multiq) { 4073 if (__netif_subqueue_stopped(dev, fifo->fifo_no)) { 4074 spin_unlock_irqrestore(&fifo->tx_lock, flags); 4075 return NETDEV_TX_BUSY; 4076 } 4077 } else if (unlikely(fifo->queue_state == FIFO_QUEUE_STOP)) { 4078 if (netif_queue_stopped(dev)) { 4079 spin_unlock_irqrestore(&fifo->tx_lock, flags); 4080 return NETDEV_TX_BUSY; 4081 } 4082 } 4083 4084 put_off = (u16)fifo->tx_curr_put_info.offset; 4085 get_off = (u16)fifo->tx_curr_get_info.offset; 4086 txdp = fifo->list_info[put_off].list_virt_addr; 4087 4088 queue_len = fifo->tx_curr_put_info.fifo_len + 1; 4089 /* Avoid "put" pointer going beyond "get" pointer */ 4090 if (txdp->Host_Control || 4091 ((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) { 4092 DBG_PRINT(TX_DBG, "Error in xmit, No free TXDs.\n"); 4093 s2io_stop_tx_queue(sp, fifo->fifo_no); 4094 dev_kfree_skb_any(skb); 4095 spin_unlock_irqrestore(&fifo->tx_lock, flags); 4096 return NETDEV_TX_OK; 4097 } 4098 4099 offload_type = s2io_offload_type(skb); 4100 if (offload_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) { 4101 txdp->Control_1 |= TXD_TCP_LSO_EN; 4102 txdp->Control_1 |= TXD_TCP_LSO_MSS(s2io_tcp_mss(skb)); 4103 } 4104 if (skb->ip_summed == CHECKSUM_PARTIAL) { 4105 txdp->Control_2 |= (TXD_TX_CKO_IPV4_EN | 4106 TXD_TX_CKO_TCP_EN | 4107 TXD_TX_CKO_UDP_EN); 4108 } 4109 txdp->Control_1 |= TXD_GATHER_CODE_FIRST; 4110 txdp->Control_1 |= TXD_LIST_OWN_XENA; 4111 txdp->Control_2 |= TXD_INT_NUMBER(fifo->fifo_no); 4112 if (enable_per_list_interrupt) 4113 if (put_off & (queue_len >> 5)) 4114 txdp->Control_2 |= TXD_INT_TYPE_PER_LIST; 4115 if (vlan_tag) { 4116 txdp->Control_2 |= TXD_VLAN_ENABLE; 4117 txdp->Control_2 |= TXD_VLAN_TAG(vlan_tag); 4118 } 4119 4120 frg_len = skb_headlen(skb); 4121 txdp->Buffer_Pointer = pci_map_single(sp->pdev, skb->data, 4122 frg_len, PCI_DMA_TODEVICE); 4123 if (pci_dma_mapping_error(sp->pdev, txdp->Buffer_Pointer)) 4124 goto pci_map_failed; 4125 4126 txdp->Host_Control = (unsigned long)skb; 4127 txdp->Control_1 |= TXD_BUFFER0_SIZE(frg_len); 4128 4129 frg_cnt = skb_shinfo(skb)->nr_frags; 4130 /* For fragmented SKB. */ 4131 for (i = 0; i < frg_cnt; i++) { 4132 const skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; 4133 /* A '0' length fragment will be ignored */ 4134 if (!skb_frag_size(frag)) 4135 continue; 4136 txdp++; 4137 txdp->Buffer_Pointer = (u64)skb_frag_dma_map(&sp->pdev->dev, 4138 frag, 0, 4139 skb_frag_size(frag), 4140 DMA_TO_DEVICE); 4141 txdp->Control_1 = TXD_BUFFER0_SIZE(skb_frag_size(frag)); 4142 } 4143 txdp->Control_1 |= TXD_GATHER_CODE_LAST; 4144 4145 tx_fifo = mac_control->tx_FIFO_start[queue]; 4146 val64 = fifo->list_info[put_off].list_phy_addr; 4147 writeq(val64, &tx_fifo->TxDL_Pointer); 4148 4149 val64 = (TX_FIFO_LAST_TXD_NUM(frg_cnt) | TX_FIFO_FIRST_LIST | 4150 TX_FIFO_LAST_LIST); 4151 if (offload_type) 4152 val64 |= TX_FIFO_SPECIAL_FUNC; 4153 4154 writeq(val64, &tx_fifo->List_Control); 4155 4156 mmiowb(); 4157 4158 put_off++; 4159 if (put_off == fifo->tx_curr_put_info.fifo_len + 1) 4160 put_off = 0; 4161 fifo->tx_curr_put_info.offset = put_off; 4162 4163 /* Avoid "put" pointer going beyond "get" pointer */ 4164 if (((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) { 4165 swstats->fifo_full_cnt++; 4166 DBG_PRINT(TX_DBG, 4167 "No free TxDs for xmit, Put: 0x%x Get:0x%x\n", 4168 put_off, get_off); 4169 s2io_stop_tx_queue(sp, fifo->fifo_no); 4170 } 4171 swstats->mem_allocated += skb->truesize; 4172 spin_unlock_irqrestore(&fifo->tx_lock, flags); 4173 4174 if (sp->config.intr_type == MSI_X) 4175 tx_intr_handler(fifo); 4176 4177 return NETDEV_TX_OK; 4178 4179 pci_map_failed: 4180 swstats->pci_map_fail_cnt++; 4181 s2io_stop_tx_queue(sp, fifo->fifo_no); 4182 swstats->mem_freed += skb->truesize; 4183 dev_kfree_skb_any(skb); 4184 spin_unlock_irqrestore(&fifo->tx_lock, flags); 4185 return NETDEV_TX_OK; 4186 } 4187 4188 static void 4189 s2io_alarm_handle(struct timer_list *t) 4190 { 4191 struct s2io_nic *sp = from_timer(sp, t, alarm_timer); 4192 struct net_device *dev = sp->dev; 4193 4194 s2io_handle_errors(dev); 4195 mod_timer(&sp->alarm_timer, jiffies + HZ / 2); 4196 } 4197 4198 static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id) 4199 { 4200 struct ring_info *ring = (struct ring_info *)dev_id; 4201 struct s2io_nic *sp = ring->nic; 4202 struct XENA_dev_config __iomem *bar0 = sp->bar0; 4203 4204 if (unlikely(!is_s2io_card_up(sp))) 4205 return IRQ_HANDLED; 4206 4207 if (sp->config.napi) { 4208 u8 __iomem *addr = NULL; 4209 u8 val8 = 0; 4210 4211 addr = (u8 __iomem *)&bar0->xmsi_mask_reg; 4212 addr += (7 - ring->ring_no); 4213 val8 = (ring->ring_no == 0) ? 0x7f : 0xff; 4214 writeb(val8, addr); 4215 val8 = readb(addr); 4216 napi_schedule(&ring->napi); 4217 } else { 4218 rx_intr_handler(ring, 0); 4219 s2io_chk_rx_buffers(sp, ring); 4220 } 4221 4222 return IRQ_HANDLED; 4223 } 4224 4225 static irqreturn_t s2io_msix_fifo_handle(int irq, void *dev_id) 4226 { 4227 int i; 4228 struct fifo_info *fifos = (struct fifo_info *)dev_id; 4229 struct s2io_nic *sp = fifos->nic; 4230 struct XENA_dev_config __iomem *bar0 = sp->bar0; 4231 struct config_param *config = &sp->config; 4232 u64 reason; 4233 4234 if (unlikely(!is_s2io_card_up(sp))) 4235 return IRQ_NONE; 4236 4237 reason = readq(&bar0->general_int_status); 4238 if (unlikely(reason == S2IO_MINUS_ONE)) 4239 /* Nothing much can be done. Get out */ 4240 return IRQ_HANDLED; 4241 4242 if (reason & (GEN_INTR_TXPIC | GEN_INTR_TXTRAFFIC)) { 4243 writeq(S2IO_MINUS_ONE, &bar0->general_int_mask); 4244 4245 if (reason & GEN_INTR_TXPIC) 4246 s2io_txpic_intr_handle(sp); 4247 4248 if (reason & GEN_INTR_TXTRAFFIC) 4249 writeq(S2IO_MINUS_ONE, &bar0->tx_traffic_int); 4250 4251 for (i = 0; i < config->tx_fifo_num; i++) 4252 tx_intr_handler(&fifos[i]); 4253 4254 writeq(sp->general_int_mask, &bar0->general_int_mask); 4255 readl(&bar0->general_int_status); 4256 return IRQ_HANDLED; 4257 } 4258 /* The interrupt was not raised by us */ 4259 return IRQ_NONE; 4260 } 4261 4262 static void s2io_txpic_intr_handle(struct s2io_nic *sp) 4263 { 4264 struct XENA_dev_config __iomem *bar0 = sp->bar0; 4265 u64 val64; 4266 4267 val64 = readq(&bar0->pic_int_status); 4268 if (val64 & PIC_INT_GPIO) { 4269 val64 = readq(&bar0->gpio_int_reg); 4270 if ((val64 & GPIO_INT_REG_LINK_DOWN) && 4271 (val64 & GPIO_INT_REG_LINK_UP)) { 4272 /* 4273 * This is unstable state so clear both up/down 4274 * interrupt and adapter to re-evaluate the link state. 4275 */ 4276 val64 |= GPIO_INT_REG_LINK_DOWN; 4277 val64 |= GPIO_INT_REG_LINK_UP; 4278 writeq(val64, &bar0->gpio_int_reg); 4279 val64 = readq(&bar0->gpio_int_mask); 4280 val64 &= ~(GPIO_INT_MASK_LINK_UP | 4281 GPIO_INT_MASK_LINK_DOWN); 4282 writeq(val64, &bar0->gpio_int_mask); 4283 } else if (val64 & GPIO_INT_REG_LINK_UP) { 4284 val64 = readq(&bar0->adapter_status); 4285 /* Enable Adapter */ 4286 val64 = readq(&bar0->adapter_control); 4287 val64 |= ADAPTER_CNTL_EN; 4288 writeq(val64, &bar0->adapter_control); 4289 val64 |= ADAPTER_LED_ON; 4290 writeq(val64, &bar0->adapter_control); 4291 if (!sp->device_enabled_once) 4292 sp->device_enabled_once = 1; 4293 4294 s2io_link(sp, LINK_UP); 4295 /* 4296 * unmask link down interrupt and mask link-up 4297 * intr 4298 */ 4299 val64 = readq(&bar0->gpio_int_mask); 4300 val64 &= ~GPIO_INT_MASK_LINK_DOWN; 4301 val64 |= GPIO_INT_MASK_LINK_UP; 4302 writeq(val64, &bar0->gpio_int_mask); 4303 4304 } else if (val64 & GPIO_INT_REG_LINK_DOWN) { 4305 val64 = readq(&bar0->adapter_status); 4306 s2io_link(sp, LINK_DOWN); 4307 /* Link is down so unmaks link up interrupt */ 4308 val64 = readq(&bar0->gpio_int_mask); 4309 val64 &= ~GPIO_INT_MASK_LINK_UP; 4310 val64 |= GPIO_INT_MASK_LINK_DOWN; 4311 writeq(val64, &bar0->gpio_int_mask); 4312 4313 /* turn off LED */ 4314 val64 = readq(&bar0->adapter_control); 4315 val64 = val64 & (~ADAPTER_LED_ON); 4316 writeq(val64, &bar0->adapter_control); 4317 } 4318 } 4319 val64 = readq(&bar0->gpio_int_mask); 4320 } 4321 4322 /** 4323 * do_s2io_chk_alarm_bit - Check for alarm and incrment the counter 4324 * @value: alarm bits 4325 * @addr: address value 4326 * @cnt: counter variable 4327 * Description: Check for alarm and increment the counter 4328 * Return Value: 4329 * 1 - if alarm bit set 4330 * 0 - if alarm bit is not set 4331 */ 4332 static int do_s2io_chk_alarm_bit(u64 value, void __iomem *addr, 4333 unsigned long long *cnt) 4334 { 4335 u64 val64; 4336 val64 = readq(addr); 4337 if (val64 & value) { 4338 writeq(val64, addr); 4339 (*cnt)++; 4340 return 1; 4341 } 4342 return 0; 4343 4344 } 4345 4346 /** 4347 * s2io_handle_errors - Xframe error indication handler 4348 * @nic: device private variable 4349 * Description: Handle alarms such as loss of link, single or 4350 * double ECC errors, critical and serious errors. 4351 * Return Value: 4352 * NONE 4353 */ 4354 static void s2io_handle_errors(void *dev_id) 4355 { 4356 struct net_device *dev = (struct net_device *)dev_id; 4357 struct s2io_nic *sp = netdev_priv(dev); 4358 struct XENA_dev_config __iomem *bar0 = sp->bar0; 4359 u64 temp64 = 0, val64 = 0; 4360 int i = 0; 4361 4362 struct swStat *sw_stat = &sp->mac_control.stats_info->sw_stat; 4363 struct xpakStat *stats = &sp->mac_control.stats_info->xpak_stat; 4364 4365 if (!is_s2io_card_up(sp)) 4366 return; 4367 4368 if (pci_channel_offline(sp->pdev)) 4369 return; 4370 4371 memset(&sw_stat->ring_full_cnt, 0, 4372 sizeof(sw_stat->ring_full_cnt)); 4373 4374 /* Handling the XPAK counters update */ 4375 if (stats->xpak_timer_count < 72000) { 4376 /* waiting for an hour */ 4377 stats->xpak_timer_count++; 4378 } else { 4379 s2io_updt_xpak_counter(dev); 4380 /* reset the count to zero */ 4381 stats->xpak_timer_count = 0; 4382 } 4383 4384 /* Handling link status change error Intr */ 4385 if (s2io_link_fault_indication(sp) == MAC_RMAC_ERR_TIMER) { 4386 val64 = readq(&bar0->mac_rmac_err_reg); 4387 writeq(val64, &bar0->mac_rmac_err_reg); 4388 if (val64 & RMAC_LINK_STATE_CHANGE_INT) 4389 schedule_work(&sp->set_link_task); 4390 } 4391 4392 /* In case of a serious error, the device will be Reset. */ 4393 if (do_s2io_chk_alarm_bit(SERR_SOURCE_ANY, &bar0->serr_source, 4394 &sw_stat->serious_err_cnt)) 4395 goto reset; 4396 4397 /* Check for data parity error */ 4398 if (do_s2io_chk_alarm_bit(GPIO_INT_REG_DP_ERR_INT, &bar0->gpio_int_reg, 4399 &sw_stat->parity_err_cnt)) 4400 goto reset; 4401 4402 /* Check for ring full counter */ 4403 if (sp->device_type == XFRAME_II_DEVICE) { 4404 val64 = readq(&bar0->ring_bump_counter1); 4405 for (i = 0; i < 4; i++) { 4406 temp64 = (val64 & vBIT(0xFFFF, (i*16), 16)); 4407 temp64 >>= 64 - ((i+1)*16); 4408 sw_stat->ring_full_cnt[i] += temp64; 4409 } 4410 4411 val64 = readq(&bar0->ring_bump_counter2); 4412 for (i = 0; i < 4; i++) { 4413 temp64 = (val64 & vBIT(0xFFFF, (i*16), 16)); 4414 temp64 >>= 64 - ((i+1)*16); 4415 sw_stat->ring_full_cnt[i+4] += temp64; 4416 } 4417 } 4418 4419 val64 = readq(&bar0->txdma_int_status); 4420 /*check for pfc_err*/ 4421 if (val64 & TXDMA_PFC_INT) { 4422 if (do_s2io_chk_alarm_bit(PFC_ECC_DB_ERR | PFC_SM_ERR_ALARM | 4423 PFC_MISC_0_ERR | PFC_MISC_1_ERR | 4424 PFC_PCIX_ERR, 4425 &bar0->pfc_err_reg, 4426 &sw_stat->pfc_err_cnt)) 4427 goto reset; 4428 do_s2io_chk_alarm_bit(PFC_ECC_SG_ERR, 4429 &bar0->pfc_err_reg, 4430 &sw_stat->pfc_err_cnt); 4431 } 4432 4433 /*check for tda_err*/ 4434 if (val64 & TXDMA_TDA_INT) { 4435 if (do_s2io_chk_alarm_bit(TDA_Fn_ECC_DB_ERR | 4436 TDA_SM0_ERR_ALARM | 4437 TDA_SM1_ERR_ALARM, 4438 &bar0->tda_err_reg, 4439 &sw_stat->tda_err_cnt)) 4440 goto reset; 4441 do_s2io_chk_alarm_bit(TDA_Fn_ECC_SG_ERR | TDA_PCIX_ERR, 4442 &bar0->tda_err_reg, 4443 &sw_stat->tda_err_cnt); 4444 } 4445 /*check for pcc_err*/ 4446 if (val64 & TXDMA_PCC_INT) { 4447 if (do_s2io_chk_alarm_bit(PCC_SM_ERR_ALARM | PCC_WR_ERR_ALARM | 4448 PCC_N_SERR | PCC_6_COF_OV_ERR | 4449 PCC_7_COF_OV_ERR | PCC_6_LSO_OV_ERR | 4450 PCC_7_LSO_OV_ERR | PCC_FB_ECC_DB_ERR | 4451 PCC_TXB_ECC_DB_ERR, 4452 &bar0->pcc_err_reg, 4453 &sw_stat->pcc_err_cnt)) 4454 goto reset; 4455 do_s2io_chk_alarm_bit(PCC_FB_ECC_SG_ERR | PCC_TXB_ECC_SG_ERR, 4456 &bar0->pcc_err_reg, 4457 &sw_stat->pcc_err_cnt); 4458 } 4459 4460 /*check for tti_err*/ 4461 if (val64 & TXDMA_TTI_INT) { 4462 if (do_s2io_chk_alarm_bit(TTI_SM_ERR_ALARM, 4463 &bar0->tti_err_reg, 4464 &sw_stat->tti_err_cnt)) 4465 goto reset; 4466 do_s2io_chk_alarm_bit(TTI_ECC_SG_ERR | TTI_ECC_DB_ERR, 4467 &bar0->tti_err_reg, 4468 &sw_stat->tti_err_cnt); 4469 } 4470 4471 /*check for lso_err*/ 4472 if (val64 & TXDMA_LSO_INT) { 4473 if (do_s2io_chk_alarm_bit(LSO6_ABORT | LSO7_ABORT | 4474 LSO6_SM_ERR_ALARM | LSO7_SM_ERR_ALARM, 4475 &bar0->lso_err_reg, 4476 &sw_stat->lso_err_cnt)) 4477 goto reset; 4478 do_s2io_chk_alarm_bit(LSO6_SEND_OFLOW | LSO7_SEND_OFLOW, 4479 &bar0->lso_err_reg, 4480 &sw_stat->lso_err_cnt); 4481 } 4482 4483 /*check for tpa_err*/ 4484 if (val64 & TXDMA_TPA_INT) { 4485 if (do_s2io_chk_alarm_bit(TPA_SM_ERR_ALARM, 4486 &bar0->tpa_err_reg, 4487 &sw_stat->tpa_err_cnt)) 4488 goto reset; 4489 do_s2io_chk_alarm_bit(TPA_TX_FRM_DROP, 4490 &bar0->tpa_err_reg, 4491 &sw_stat->tpa_err_cnt); 4492 } 4493 4494 /*check for sm_err*/ 4495 if (val64 & TXDMA_SM_INT) { 4496 if (do_s2io_chk_alarm_bit(SM_SM_ERR_ALARM, 4497 &bar0->sm_err_reg, 4498 &sw_stat->sm_err_cnt)) 4499 goto reset; 4500 } 4501 4502 val64 = readq(&bar0->mac_int_status); 4503 if (val64 & MAC_INT_STATUS_TMAC_INT) { 4504 if (do_s2io_chk_alarm_bit(TMAC_TX_BUF_OVRN | TMAC_TX_SM_ERR, 4505 &bar0->mac_tmac_err_reg, 4506 &sw_stat->mac_tmac_err_cnt)) 4507 goto reset; 4508 do_s2io_chk_alarm_bit(TMAC_ECC_SG_ERR | TMAC_ECC_DB_ERR | 4509 TMAC_DESC_ECC_SG_ERR | 4510 TMAC_DESC_ECC_DB_ERR, 4511 &bar0->mac_tmac_err_reg, 4512 &sw_stat->mac_tmac_err_cnt); 4513 } 4514 4515 val64 = readq(&bar0->xgxs_int_status); 4516 if (val64 & XGXS_INT_STATUS_TXGXS) { 4517 if (do_s2io_chk_alarm_bit(TXGXS_ESTORE_UFLOW | TXGXS_TX_SM_ERR, 4518 &bar0->xgxs_txgxs_err_reg, 4519 &sw_stat->xgxs_txgxs_err_cnt)) 4520 goto reset; 4521 do_s2io_chk_alarm_bit(TXGXS_ECC_SG_ERR | TXGXS_ECC_DB_ERR, 4522 &bar0->xgxs_txgxs_err_reg, 4523 &sw_stat->xgxs_txgxs_err_cnt); 4524 } 4525 4526 val64 = readq(&bar0->rxdma_int_status); 4527 if (val64 & RXDMA_INT_RC_INT_M) { 4528 if (do_s2io_chk_alarm_bit(RC_PRCn_ECC_DB_ERR | 4529 RC_FTC_ECC_DB_ERR | 4530 RC_PRCn_SM_ERR_ALARM | 4531 RC_FTC_SM_ERR_ALARM, 4532 &bar0->rc_err_reg, 4533 &sw_stat->rc_err_cnt)) 4534 goto reset; 4535 do_s2io_chk_alarm_bit(RC_PRCn_ECC_SG_ERR | 4536 RC_FTC_ECC_SG_ERR | 4537 RC_RDA_FAIL_WR_Rn, &bar0->rc_err_reg, 4538 &sw_stat->rc_err_cnt); 4539 if (do_s2io_chk_alarm_bit(PRC_PCI_AB_RD_Rn | 4540 PRC_PCI_AB_WR_Rn | 4541 PRC_PCI_AB_F_WR_Rn, 4542 &bar0->prc_pcix_err_reg, 4543 &sw_stat->prc_pcix_err_cnt)) 4544 goto reset; 4545 do_s2io_chk_alarm_bit(PRC_PCI_DP_RD_Rn | 4546 PRC_PCI_DP_WR_Rn | 4547 PRC_PCI_DP_F_WR_Rn, 4548 &bar0->prc_pcix_err_reg, 4549 &sw_stat->prc_pcix_err_cnt); 4550 } 4551 4552 if (val64 & RXDMA_INT_RPA_INT_M) { 4553 if (do_s2io_chk_alarm_bit(RPA_SM_ERR_ALARM | RPA_CREDIT_ERR, 4554 &bar0->rpa_err_reg, 4555 &sw_stat->rpa_err_cnt)) 4556 goto reset; 4557 do_s2io_chk_alarm_bit(RPA_ECC_SG_ERR | RPA_ECC_DB_ERR, 4558 &bar0->rpa_err_reg, 4559 &sw_stat->rpa_err_cnt); 4560 } 4561 4562 if (val64 & RXDMA_INT_RDA_INT_M) { 4563 if (do_s2io_chk_alarm_bit(RDA_RXDn_ECC_DB_ERR | 4564 RDA_FRM_ECC_DB_N_AERR | 4565 RDA_SM1_ERR_ALARM | 4566 RDA_SM0_ERR_ALARM | 4567 RDA_RXD_ECC_DB_SERR, 4568 &bar0->rda_err_reg, 4569 &sw_stat->rda_err_cnt)) 4570 goto reset; 4571 do_s2io_chk_alarm_bit(RDA_RXDn_ECC_SG_ERR | 4572 RDA_FRM_ECC_SG_ERR | 4573 RDA_MISC_ERR | 4574 RDA_PCIX_ERR, 4575 &bar0->rda_err_reg, 4576 &sw_stat->rda_err_cnt); 4577 } 4578 4579 if (val64 & RXDMA_INT_RTI_INT_M) { 4580 if (do_s2io_chk_alarm_bit(RTI_SM_ERR_ALARM, 4581 &bar0->rti_err_reg, 4582 &sw_stat->rti_err_cnt)) 4583 goto reset; 4584 do_s2io_chk_alarm_bit(RTI_ECC_SG_ERR | RTI_ECC_DB_ERR, 4585 &bar0->rti_err_reg, 4586 &sw_stat->rti_err_cnt); 4587 } 4588 4589 val64 = readq(&bar0->mac_int_status); 4590 if (val64 & MAC_INT_STATUS_RMAC_INT) { 4591 if (do_s2io_chk_alarm_bit(RMAC_RX_BUFF_OVRN | RMAC_RX_SM_ERR, 4592 &bar0->mac_rmac_err_reg, 4593 &sw_stat->mac_rmac_err_cnt)) 4594 goto reset; 4595 do_s2io_chk_alarm_bit(RMAC_UNUSED_INT | 4596 RMAC_SINGLE_ECC_ERR | 4597 RMAC_DOUBLE_ECC_ERR, 4598 &bar0->mac_rmac_err_reg, 4599 &sw_stat->mac_rmac_err_cnt); 4600 } 4601 4602 val64 = readq(&bar0->xgxs_int_status); 4603 if (val64 & XGXS_INT_STATUS_RXGXS) { 4604 if (do_s2io_chk_alarm_bit(RXGXS_ESTORE_OFLOW | RXGXS_RX_SM_ERR, 4605 &bar0->xgxs_rxgxs_err_reg, 4606 &sw_stat->xgxs_rxgxs_err_cnt)) 4607 goto reset; 4608 } 4609 4610 val64 = readq(&bar0->mc_int_status); 4611 if (val64 & MC_INT_STATUS_MC_INT) { 4612 if (do_s2io_chk_alarm_bit(MC_ERR_REG_SM_ERR, 4613 &bar0->mc_err_reg, 4614 &sw_stat->mc_err_cnt)) 4615 goto reset; 4616 4617 /* Handling Ecc errors */ 4618 if (val64 & (MC_ERR_REG_ECC_ALL_SNG | MC_ERR_REG_ECC_ALL_DBL)) { 4619 writeq(val64, &bar0->mc_err_reg); 4620 if (val64 & MC_ERR_REG_ECC_ALL_DBL) { 4621 sw_stat->double_ecc_errs++; 4622 if (sp->device_type != XFRAME_II_DEVICE) { 4623 /* 4624 * Reset XframeI only if critical error 4625 */ 4626 if (val64 & 4627 (MC_ERR_REG_MIRI_ECC_DB_ERR_0 | 4628 MC_ERR_REG_MIRI_ECC_DB_ERR_1)) 4629 goto reset; 4630 } 4631 } else 4632 sw_stat->single_ecc_errs++; 4633 } 4634 } 4635 return; 4636 4637 reset: 4638 s2io_stop_all_tx_queue(sp); 4639 schedule_work(&sp->rst_timer_task); 4640 sw_stat->soft_reset_cnt++; 4641 } 4642 4643 /** 4644 * s2io_isr - ISR handler of the device . 4645 * @irq: the irq of the device. 4646 * @dev_id: a void pointer to the dev structure of the NIC. 4647 * Description: This function is the ISR handler of the device. It 4648 * identifies the reason for the interrupt and calls the relevant 4649 * service routines. As a contongency measure, this ISR allocates the 4650 * recv buffers, if their numbers are below the panic value which is 4651 * presently set to 25% of the original number of rcv buffers allocated. 4652 * Return value: 4653 * IRQ_HANDLED: will be returned if IRQ was handled by this routine 4654 * IRQ_NONE: will be returned if interrupt is not from our device 4655 */ 4656 static irqreturn_t s2io_isr(int irq, void *dev_id) 4657 { 4658 struct net_device *dev = (struct net_device *)dev_id; 4659 struct s2io_nic *sp = netdev_priv(dev); 4660 struct XENA_dev_config __iomem *bar0 = sp->bar0; 4661 int i; 4662 u64 reason = 0; 4663 struct mac_info *mac_control; 4664 struct config_param *config; 4665 4666 /* Pretend we handled any irq's from a disconnected card */ 4667 if (pci_channel_offline(sp->pdev)) 4668 return IRQ_NONE; 4669 4670 if (!is_s2io_card_up(sp)) 4671 return IRQ_NONE; 4672 4673 config = &sp->config; 4674 mac_control = &sp->mac_control; 4675 4676 /* 4677 * Identify the cause for interrupt and call the appropriate 4678 * interrupt handler. Causes for the interrupt could be; 4679 * 1. Rx of packet. 4680 * 2. Tx complete. 4681 * 3. Link down. 4682 */ 4683 reason = readq(&bar0->general_int_status); 4684 4685 if (unlikely(reason == S2IO_MINUS_ONE)) 4686 return IRQ_HANDLED; /* Nothing much can be done. Get out */ 4687 4688 if (reason & 4689 (GEN_INTR_RXTRAFFIC | GEN_INTR_TXTRAFFIC | GEN_INTR_TXPIC)) { 4690 writeq(S2IO_MINUS_ONE, &bar0->general_int_mask); 4691 4692 if (config->napi) { 4693 if (reason & GEN_INTR_RXTRAFFIC) { 4694 napi_schedule(&sp->napi); 4695 writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_mask); 4696 writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int); 4697 readl(&bar0->rx_traffic_int); 4698 } 4699 } else { 4700 /* 4701 * rx_traffic_int reg is an R1 register, writing all 1's 4702 * will ensure that the actual interrupt causing bit 4703 * get's cleared and hence a read can be avoided. 4704 */ 4705 if (reason & GEN_INTR_RXTRAFFIC) 4706 writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int); 4707 4708 for (i = 0; i < config->rx_ring_num; i++) { 4709 struct ring_info *ring = &mac_control->rings[i]; 4710 4711 rx_intr_handler(ring, 0); 4712 } 4713 } 4714 4715 /* 4716 * tx_traffic_int reg is an R1 register, writing all 1's 4717 * will ensure that the actual interrupt causing bit get's 4718 * cleared and hence a read can be avoided. 4719 */ 4720 if (reason & GEN_INTR_TXTRAFFIC) 4721 writeq(S2IO_MINUS_ONE, &bar0->tx_traffic_int); 4722 4723 for (i = 0; i < config->tx_fifo_num; i++) 4724 tx_intr_handler(&mac_control->fifos[i]); 4725 4726 if (reason & GEN_INTR_TXPIC) 4727 s2io_txpic_intr_handle(sp); 4728 4729 /* 4730 * Reallocate the buffers from the interrupt handler itself. 4731 */ 4732 if (!config->napi) { 4733 for (i = 0; i < config->rx_ring_num; i++) { 4734 struct ring_info *ring = &mac_control->rings[i]; 4735 4736 s2io_chk_rx_buffers(sp, ring); 4737 } 4738 } 4739 writeq(sp->general_int_mask, &bar0->general_int_mask); 4740 readl(&bar0->general_int_status); 4741 4742 return IRQ_HANDLED; 4743 4744 } else if (!reason) { 4745 /* The interrupt was not raised by us */ 4746 return IRQ_NONE; 4747 } 4748 4749 return IRQ_HANDLED; 4750 } 4751 4752 /** 4753 * s2io_updt_stats - 4754 */ 4755 static void s2io_updt_stats(struct s2io_nic *sp) 4756 { 4757 struct XENA_dev_config __iomem *bar0 = sp->bar0; 4758 u64 val64; 4759 int cnt = 0; 4760 4761 if (is_s2io_card_up(sp)) { 4762 /* Apprx 30us on a 133 MHz bus */ 4763 val64 = SET_UPDT_CLICKS(10) | 4764 STAT_CFG_ONE_SHOT_EN | STAT_CFG_STAT_EN; 4765 writeq(val64, &bar0->stat_cfg); 4766 do { 4767 udelay(100); 4768 val64 = readq(&bar0->stat_cfg); 4769 if (!(val64 & s2BIT(0))) 4770 break; 4771 cnt++; 4772 if (cnt == 5) 4773 break; /* Updt failed */ 4774 } while (1); 4775 } 4776 } 4777 4778 /** 4779 * s2io_get_stats - Updates the device statistics structure. 4780 * @dev : pointer to the device structure. 4781 * Description: 4782 * This function updates the device statistics structure in the s2io_nic 4783 * structure and returns a pointer to the same. 4784 * Return value: 4785 * pointer to the updated net_device_stats structure. 4786 */ 4787 static struct net_device_stats *s2io_get_stats(struct net_device *dev) 4788 { 4789 struct s2io_nic *sp = netdev_priv(dev); 4790 struct mac_info *mac_control = &sp->mac_control; 4791 struct stat_block *stats = mac_control->stats_info; 4792 u64 delta; 4793 4794 /* Configure Stats for immediate updt */ 4795 s2io_updt_stats(sp); 4796 4797 /* A device reset will cause the on-adapter statistics to be zero'ed. 4798 * This can be done while running by changing the MTU. To prevent the 4799 * system from having the stats zero'ed, the driver keeps a copy of the 4800 * last update to the system (which is also zero'ed on reset). This 4801 * enables the driver to accurately know the delta between the last 4802 * update and the current update. 4803 */ 4804 delta = ((u64) le32_to_cpu(stats->rmac_vld_frms_oflow) << 32 | 4805 le32_to_cpu(stats->rmac_vld_frms)) - sp->stats.rx_packets; 4806 sp->stats.rx_packets += delta; 4807 dev->stats.rx_packets += delta; 4808 4809 delta = ((u64) le32_to_cpu(stats->tmac_frms_oflow) << 32 | 4810 le32_to_cpu(stats->tmac_frms)) - sp->stats.tx_packets; 4811 sp->stats.tx_packets += delta; 4812 dev->stats.tx_packets += delta; 4813 4814 delta = ((u64) le32_to_cpu(stats->rmac_data_octets_oflow) << 32 | 4815 le32_to_cpu(stats->rmac_data_octets)) - sp->stats.rx_bytes; 4816 sp->stats.rx_bytes += delta; 4817 dev->stats.rx_bytes += delta; 4818 4819 delta = ((u64) le32_to_cpu(stats->tmac_data_octets_oflow) << 32 | 4820 le32_to_cpu(stats->tmac_data_octets)) - sp->stats.tx_bytes; 4821 sp->stats.tx_bytes += delta; 4822 dev->stats.tx_bytes += delta; 4823 4824 delta = le64_to_cpu(stats->rmac_drop_frms) - sp->stats.rx_errors; 4825 sp->stats.rx_errors += delta; 4826 dev->stats.rx_errors += delta; 4827 4828 delta = ((u64) le32_to_cpu(stats->tmac_any_err_frms_oflow) << 32 | 4829 le32_to_cpu(stats->tmac_any_err_frms)) - sp->stats.tx_errors; 4830 sp->stats.tx_errors += delta; 4831 dev->stats.tx_errors += delta; 4832 4833 delta = le64_to_cpu(stats->rmac_drop_frms) - sp->stats.rx_dropped; 4834 sp->stats.rx_dropped += delta; 4835 dev->stats.rx_dropped += delta; 4836 4837 delta = le64_to_cpu(stats->tmac_drop_frms) - sp->stats.tx_dropped; 4838 sp->stats.tx_dropped += delta; 4839 dev->stats.tx_dropped += delta; 4840 4841 /* The adapter MAC interprets pause frames as multicast packets, but 4842 * does not pass them up. This erroneously increases the multicast 4843 * packet count and needs to be deducted when the multicast frame count 4844 * is queried. 4845 */ 4846 delta = (u64) le32_to_cpu(stats->rmac_vld_mcst_frms_oflow) << 32 | 4847 le32_to_cpu(stats->rmac_vld_mcst_frms); 4848 delta -= le64_to_cpu(stats->rmac_pause_ctrl_frms); 4849 delta -= sp->stats.multicast; 4850 sp->stats.multicast += delta; 4851 dev->stats.multicast += delta; 4852 4853 delta = ((u64) le32_to_cpu(stats->rmac_usized_frms_oflow) << 32 | 4854 le32_to_cpu(stats->rmac_usized_frms)) + 4855 le64_to_cpu(stats->rmac_long_frms) - sp->stats.rx_length_errors; 4856 sp->stats.rx_length_errors += delta; 4857 dev->stats.rx_length_errors += delta; 4858 4859 delta = le64_to_cpu(stats->rmac_fcs_err_frms) - sp->stats.rx_crc_errors; 4860 sp->stats.rx_crc_errors += delta; 4861 dev->stats.rx_crc_errors += delta; 4862 4863 return &dev->stats; 4864 } 4865 4866 /** 4867 * s2io_set_multicast - entry point for multicast address enable/disable. 4868 * @dev : pointer to the device structure 4869 * Description: 4870 * This function is a driver entry point which gets called by the kernel 4871 * whenever multicast addresses must be enabled/disabled. This also gets 4872 * called to set/reset promiscuous mode. Depending on the deivce flag, we 4873 * determine, if multicast address must be enabled or if promiscuous mode 4874 * is to be disabled etc. 4875 * Return value: 4876 * void. 4877 */ 4878 4879 static void s2io_set_multicast(struct net_device *dev) 4880 { 4881 int i, j, prev_cnt; 4882 struct netdev_hw_addr *ha; 4883 struct s2io_nic *sp = netdev_priv(dev); 4884 struct XENA_dev_config __iomem *bar0 = sp->bar0; 4885 u64 val64 = 0, multi_mac = 0x010203040506ULL, mask = 4886 0xfeffffffffffULL; 4887 u64 dis_addr = S2IO_DISABLE_MAC_ENTRY, mac_addr = 0; 4888 void __iomem *add; 4889 struct config_param *config = &sp->config; 4890 4891 if ((dev->flags & IFF_ALLMULTI) && (!sp->m_cast_flg)) { 4892 /* Enable all Multicast addresses */ 4893 writeq(RMAC_ADDR_DATA0_MEM_ADDR(multi_mac), 4894 &bar0->rmac_addr_data0_mem); 4895 writeq(RMAC_ADDR_DATA1_MEM_MASK(mask), 4896 &bar0->rmac_addr_data1_mem); 4897 val64 = RMAC_ADDR_CMD_MEM_WE | 4898 RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD | 4899 RMAC_ADDR_CMD_MEM_OFFSET(config->max_mc_addr - 1); 4900 writeq(val64, &bar0->rmac_addr_cmd_mem); 4901 /* Wait till command completes */ 4902 wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem, 4903 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING, 4904 S2IO_BIT_RESET); 4905 4906 sp->m_cast_flg = 1; 4907 sp->all_multi_pos = config->max_mc_addr - 1; 4908 } else if ((dev->flags & IFF_ALLMULTI) && (sp->m_cast_flg)) { 4909 /* Disable all Multicast addresses */ 4910 writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr), 4911 &bar0->rmac_addr_data0_mem); 4912 writeq(RMAC_ADDR_DATA1_MEM_MASK(0x0), 4913 &bar0->rmac_addr_data1_mem); 4914 val64 = RMAC_ADDR_CMD_MEM_WE | 4915 RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD | 4916 RMAC_ADDR_CMD_MEM_OFFSET(sp->all_multi_pos); 4917 writeq(val64, &bar0->rmac_addr_cmd_mem); 4918 /* Wait till command completes */ 4919 wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem, 4920 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING, 4921 S2IO_BIT_RESET); 4922 4923 sp->m_cast_flg = 0; 4924 sp->all_multi_pos = 0; 4925 } 4926 4927 if ((dev->flags & IFF_PROMISC) && (!sp->promisc_flg)) { 4928 /* Put the NIC into promiscuous mode */ 4929 add = &bar0->mac_cfg; 4930 val64 = readq(&bar0->mac_cfg); 4931 val64 |= MAC_CFG_RMAC_PROM_ENABLE; 4932 4933 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key); 4934 writel((u32)val64, add); 4935 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key); 4936 writel((u32) (val64 >> 32), (add + 4)); 4937 4938 if (vlan_tag_strip != 1) { 4939 val64 = readq(&bar0->rx_pa_cfg); 4940 val64 &= ~RX_PA_CFG_STRIP_VLAN_TAG; 4941 writeq(val64, &bar0->rx_pa_cfg); 4942 sp->vlan_strip_flag = 0; 4943 } 4944 4945 val64 = readq(&bar0->mac_cfg); 4946 sp->promisc_flg = 1; 4947 DBG_PRINT(INFO_DBG, "%s: entered promiscuous mode\n", 4948 dev->name); 4949 } else if (!(dev->flags & IFF_PROMISC) && (sp->promisc_flg)) { 4950 /* Remove the NIC from promiscuous mode */ 4951 add = &bar0->mac_cfg; 4952 val64 = readq(&bar0->mac_cfg); 4953 val64 &= ~MAC_CFG_RMAC_PROM_ENABLE; 4954 4955 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key); 4956 writel((u32)val64, add); 4957 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key); 4958 writel((u32) (val64 >> 32), (add + 4)); 4959 4960 if (vlan_tag_strip != 0) { 4961 val64 = readq(&bar0->rx_pa_cfg); 4962 val64 |= RX_PA_CFG_STRIP_VLAN_TAG; 4963 writeq(val64, &bar0->rx_pa_cfg); 4964 sp->vlan_strip_flag = 1; 4965 } 4966 4967 val64 = readq(&bar0->mac_cfg); 4968 sp->promisc_flg = 0; 4969 DBG_PRINT(INFO_DBG, "%s: left promiscuous mode\n", dev->name); 4970 } 4971 4972 /* Update individual M_CAST address list */ 4973 if ((!sp->m_cast_flg) && netdev_mc_count(dev)) { 4974 if (netdev_mc_count(dev) > 4975 (config->max_mc_addr - config->max_mac_addr)) { 4976 DBG_PRINT(ERR_DBG, 4977 "%s: No more Rx filters can be added - " 4978 "please enable ALL_MULTI instead\n", 4979 dev->name); 4980 return; 4981 } 4982 4983 prev_cnt = sp->mc_addr_count; 4984 sp->mc_addr_count = netdev_mc_count(dev); 4985 4986 /* Clear out the previous list of Mc in the H/W. */ 4987 for (i = 0; i < prev_cnt; i++) { 4988 writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr), 4989 &bar0->rmac_addr_data0_mem); 4990 writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL), 4991 &bar0->rmac_addr_data1_mem); 4992 val64 = RMAC_ADDR_CMD_MEM_WE | 4993 RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD | 4994 RMAC_ADDR_CMD_MEM_OFFSET 4995 (config->mc_start_offset + i); 4996 writeq(val64, &bar0->rmac_addr_cmd_mem); 4997 4998 /* Wait for command completes */ 4999 if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem, 5000 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING, 5001 S2IO_BIT_RESET)) { 5002 DBG_PRINT(ERR_DBG, 5003 "%s: Adding Multicasts failed\n", 5004 dev->name); 5005 return; 5006 } 5007 } 5008 5009 /* Create the new Rx filter list and update the same in H/W. */ 5010 i = 0; 5011 netdev_for_each_mc_addr(ha, dev) { 5012 mac_addr = 0; 5013 for (j = 0; j < ETH_ALEN; j++) { 5014 mac_addr |= ha->addr[j]; 5015 mac_addr <<= 8; 5016 } 5017 mac_addr >>= 8; 5018 writeq(RMAC_ADDR_DATA0_MEM_ADDR(mac_addr), 5019 &bar0->rmac_addr_data0_mem); 5020 writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL), 5021 &bar0->rmac_addr_data1_mem); 5022 val64 = RMAC_ADDR_CMD_MEM_WE | 5023 RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD | 5024 RMAC_ADDR_CMD_MEM_OFFSET 5025 (i + config->mc_start_offset); 5026 writeq(val64, &bar0->rmac_addr_cmd_mem); 5027 5028 /* Wait for command completes */ 5029 if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem, 5030 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING, 5031 S2IO_BIT_RESET)) { 5032 DBG_PRINT(ERR_DBG, 5033 "%s: Adding Multicasts failed\n", 5034 dev->name); 5035 return; 5036 } 5037 i++; 5038 } 5039 } 5040 } 5041 5042 /* read from CAM unicast & multicast addresses and store it in 5043 * def_mac_addr structure 5044 */ 5045 static void do_s2io_store_unicast_mc(struct s2io_nic *sp) 5046 { 5047 int offset; 5048 u64 mac_addr = 0x0; 5049 struct config_param *config = &sp->config; 5050 5051 /* store unicast & multicast mac addresses */ 5052 for (offset = 0; offset < config->max_mc_addr; offset++) { 5053 mac_addr = do_s2io_read_unicast_mc(sp, offset); 5054 /* if read fails disable the entry */ 5055 if (mac_addr == FAILURE) 5056 mac_addr = S2IO_DISABLE_MAC_ENTRY; 5057 do_s2io_copy_mac_addr(sp, offset, mac_addr); 5058 } 5059 } 5060 5061 /* restore unicast & multicast MAC to CAM from def_mac_addr structure */ 5062 static void do_s2io_restore_unicast_mc(struct s2io_nic *sp) 5063 { 5064 int offset; 5065 struct config_param *config = &sp->config; 5066 /* restore unicast mac address */ 5067 for (offset = 0; offset < config->max_mac_addr; offset++) 5068 do_s2io_prog_unicast(sp->dev, 5069 sp->def_mac_addr[offset].mac_addr); 5070 5071 /* restore multicast mac address */ 5072 for (offset = config->mc_start_offset; 5073 offset < config->max_mc_addr; offset++) 5074 do_s2io_add_mc(sp, sp->def_mac_addr[offset].mac_addr); 5075 } 5076 5077 /* add a multicast MAC address to CAM */ 5078 static int do_s2io_add_mc(struct s2io_nic *sp, u8 *addr) 5079 { 5080 int i; 5081 u64 mac_addr = 0; 5082 struct config_param *config = &sp->config; 5083 5084 for (i = 0; i < ETH_ALEN; i++) { 5085 mac_addr <<= 8; 5086 mac_addr |= addr[i]; 5087 } 5088 if ((0ULL == mac_addr) || (mac_addr == S2IO_DISABLE_MAC_ENTRY)) 5089 return SUCCESS; 5090 5091 /* check if the multicast mac already preset in CAM */ 5092 for (i = config->mc_start_offset; i < config->max_mc_addr; i++) { 5093 u64 tmp64; 5094 tmp64 = do_s2io_read_unicast_mc(sp, i); 5095 if (tmp64 == S2IO_DISABLE_MAC_ENTRY) /* CAM entry is empty */ 5096 break; 5097 5098 if (tmp64 == mac_addr) 5099 return SUCCESS; 5100 } 5101 if (i == config->max_mc_addr) { 5102 DBG_PRINT(ERR_DBG, 5103 "CAM full no space left for multicast MAC\n"); 5104 return FAILURE; 5105 } 5106 /* Update the internal structure with this new mac address */ 5107 do_s2io_copy_mac_addr(sp, i, mac_addr); 5108 5109 return do_s2io_add_mac(sp, mac_addr, i); 5110 } 5111 5112 /* add MAC address to CAM */ 5113 static int do_s2io_add_mac(struct s2io_nic *sp, u64 addr, int off) 5114 { 5115 u64 val64; 5116 struct XENA_dev_config __iomem *bar0 = sp->bar0; 5117 5118 writeq(RMAC_ADDR_DATA0_MEM_ADDR(addr), 5119 &bar0->rmac_addr_data0_mem); 5120 5121 val64 = RMAC_ADDR_CMD_MEM_WE | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD | 5122 RMAC_ADDR_CMD_MEM_OFFSET(off); 5123 writeq(val64, &bar0->rmac_addr_cmd_mem); 5124 5125 /* Wait till command completes */ 5126 if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem, 5127 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING, 5128 S2IO_BIT_RESET)) { 5129 DBG_PRINT(INFO_DBG, "do_s2io_add_mac failed\n"); 5130 return FAILURE; 5131 } 5132 return SUCCESS; 5133 } 5134 /* deletes a specified unicast/multicast mac entry from CAM */ 5135 static int do_s2io_delete_unicast_mc(struct s2io_nic *sp, u64 addr) 5136 { 5137 int offset; 5138 u64 dis_addr = S2IO_DISABLE_MAC_ENTRY, tmp64; 5139 struct config_param *config = &sp->config; 5140 5141 for (offset = 1; 5142 offset < config->max_mc_addr; offset++) { 5143 tmp64 = do_s2io_read_unicast_mc(sp, offset); 5144 if (tmp64 == addr) { 5145 /* disable the entry by writing 0xffffffffffffULL */ 5146 if (do_s2io_add_mac(sp, dis_addr, offset) == FAILURE) 5147 return FAILURE; 5148 /* store the new mac list from CAM */ 5149 do_s2io_store_unicast_mc(sp); 5150 return SUCCESS; 5151 } 5152 } 5153 DBG_PRINT(ERR_DBG, "MAC address 0x%llx not found in CAM\n", 5154 (unsigned long long)addr); 5155 return FAILURE; 5156 } 5157 5158 /* read mac entries from CAM */ 5159 static u64 do_s2io_read_unicast_mc(struct s2io_nic *sp, int offset) 5160 { 5161 u64 tmp64 = 0xffffffffffff0000ULL, val64; 5162 struct XENA_dev_config __iomem *bar0 = sp->bar0; 5163 5164 /* read mac addr */ 5165 val64 = RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD | 5166 RMAC_ADDR_CMD_MEM_OFFSET(offset); 5167 writeq(val64, &bar0->rmac_addr_cmd_mem); 5168 5169 /* Wait till command completes */ 5170 if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem, 5171 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING, 5172 S2IO_BIT_RESET)) { 5173 DBG_PRINT(INFO_DBG, "do_s2io_read_unicast_mc failed\n"); 5174 return FAILURE; 5175 } 5176 tmp64 = readq(&bar0->rmac_addr_data0_mem); 5177 5178 return tmp64 >> 16; 5179 } 5180 5181 /** 5182 * s2io_set_mac_addr - driver entry point 5183 */ 5184 5185 static int s2io_set_mac_addr(struct net_device *dev, void *p) 5186 { 5187 struct sockaddr *addr = p; 5188 5189 if (!is_valid_ether_addr(addr->sa_data)) 5190 return -EADDRNOTAVAIL; 5191 5192 memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); 5193 5194 /* store the MAC address in CAM */ 5195 return do_s2io_prog_unicast(dev, dev->dev_addr); 5196 } 5197 /** 5198 * do_s2io_prog_unicast - Programs the Xframe mac address 5199 * @dev : pointer to the device structure. 5200 * @addr: a uchar pointer to the new mac address which is to be set. 5201 * Description : This procedure will program the Xframe to receive 5202 * frames with new Mac Address 5203 * Return value: SUCCESS on success and an appropriate (-)ve integer 5204 * as defined in errno.h file on failure. 5205 */ 5206 5207 static int do_s2io_prog_unicast(struct net_device *dev, u8 *addr) 5208 { 5209 struct s2io_nic *sp = netdev_priv(dev); 5210 register u64 mac_addr = 0, perm_addr = 0; 5211 int i; 5212 u64 tmp64; 5213 struct config_param *config = &sp->config; 5214 5215 /* 5216 * Set the new MAC address as the new unicast filter and reflect this 5217 * change on the device address registered with the OS. It will be 5218 * at offset 0. 5219 */ 5220 for (i = 0; i < ETH_ALEN; i++) { 5221 mac_addr <<= 8; 5222 mac_addr |= addr[i]; 5223 perm_addr <<= 8; 5224 perm_addr |= sp->def_mac_addr[0].mac_addr[i]; 5225 } 5226 5227 /* check if the dev_addr is different than perm_addr */ 5228 if (mac_addr == perm_addr) 5229 return SUCCESS; 5230 5231 /* check if the mac already preset in CAM */ 5232 for (i = 1; i < config->max_mac_addr; i++) { 5233 tmp64 = do_s2io_read_unicast_mc(sp, i); 5234 if (tmp64 == S2IO_DISABLE_MAC_ENTRY) /* CAM entry is empty */ 5235 break; 5236 5237 if (tmp64 == mac_addr) { 5238 DBG_PRINT(INFO_DBG, 5239 "MAC addr:0x%llx already present in CAM\n", 5240 (unsigned long long)mac_addr); 5241 return SUCCESS; 5242 } 5243 } 5244 if (i == config->max_mac_addr) { 5245 DBG_PRINT(ERR_DBG, "CAM full no space left for Unicast MAC\n"); 5246 return FAILURE; 5247 } 5248 /* Update the internal structure with this new mac address */ 5249 do_s2io_copy_mac_addr(sp, i, mac_addr); 5250 5251 return do_s2io_add_mac(sp, mac_addr, i); 5252 } 5253 5254 /** 5255 * s2io_ethtool_set_link_ksettings - Sets different link parameters. 5256 * @sp : private member of the device structure, which is a pointer to the 5257 * s2io_nic structure. 5258 * @cmd: pointer to the structure with parameters given by ethtool to set 5259 * link information. 5260 * Description: 5261 * The function sets different link parameters provided by the user onto 5262 * the NIC. 5263 * Return value: 5264 * 0 on success. 5265 */ 5266 5267 static int 5268 s2io_ethtool_set_link_ksettings(struct net_device *dev, 5269 const struct ethtool_link_ksettings *cmd) 5270 { 5271 struct s2io_nic *sp = netdev_priv(dev); 5272 if ((cmd->base.autoneg == AUTONEG_ENABLE) || 5273 (cmd->base.speed != SPEED_10000) || 5274 (cmd->base.duplex != DUPLEX_FULL)) 5275 return -EINVAL; 5276 else { 5277 s2io_close(sp->dev); 5278 s2io_open(sp->dev); 5279 } 5280 5281 return 0; 5282 } 5283 5284 /** 5285 * s2io_ethtol_get_link_ksettings - Return link specific information. 5286 * @sp : private member of the device structure, pointer to the 5287 * s2io_nic structure. 5288 * @cmd : pointer to the structure with parameters given by ethtool 5289 * to return link information. 5290 * Description: 5291 * Returns link specific information like speed, duplex etc.. to ethtool. 5292 * Return value : 5293 * return 0 on success. 5294 */ 5295 5296 static int 5297 s2io_ethtool_get_link_ksettings(struct net_device *dev, 5298 struct ethtool_link_ksettings *cmd) 5299 { 5300 struct s2io_nic *sp = netdev_priv(dev); 5301 5302 ethtool_link_ksettings_zero_link_mode(cmd, supported); 5303 ethtool_link_ksettings_add_link_mode(cmd, supported, 10000baseT_Full); 5304 ethtool_link_ksettings_add_link_mode(cmd, supported, FIBRE); 5305 5306 ethtool_link_ksettings_zero_link_mode(cmd, advertising); 5307 ethtool_link_ksettings_add_link_mode(cmd, advertising, 10000baseT_Full); 5308 ethtool_link_ksettings_add_link_mode(cmd, advertising, FIBRE); 5309 5310 cmd->base.port = PORT_FIBRE; 5311 5312 if (netif_carrier_ok(sp->dev)) { 5313 cmd->base.speed = SPEED_10000; 5314 cmd->base.duplex = DUPLEX_FULL; 5315 } else { 5316 cmd->base.speed = SPEED_UNKNOWN; 5317 cmd->base.duplex = DUPLEX_UNKNOWN; 5318 } 5319 5320 cmd->base.autoneg = AUTONEG_DISABLE; 5321 return 0; 5322 } 5323 5324 /** 5325 * s2io_ethtool_gdrvinfo - Returns driver specific information. 5326 * @sp : private member of the device structure, which is a pointer to the 5327 * s2io_nic structure. 5328 * @info : pointer to the structure with parameters given by ethtool to 5329 * return driver information. 5330 * Description: 5331 * Returns driver specefic information like name, version etc.. to ethtool. 5332 * Return value: 5333 * void 5334 */ 5335 5336 static void s2io_ethtool_gdrvinfo(struct net_device *dev, 5337 struct ethtool_drvinfo *info) 5338 { 5339 struct s2io_nic *sp = netdev_priv(dev); 5340 5341 strlcpy(info->driver, s2io_driver_name, sizeof(info->driver)); 5342 strlcpy(info->version, s2io_driver_version, sizeof(info->version)); 5343 strlcpy(info->bus_info, pci_name(sp->pdev), sizeof(info->bus_info)); 5344 } 5345 5346 /** 5347 * s2io_ethtool_gregs - dumps the entire space of Xfame into the buffer. 5348 * @sp: private member of the device structure, which is a pointer to the 5349 * s2io_nic structure. 5350 * @regs : pointer to the structure with parameters given by ethtool for 5351 * dumping the registers. 5352 * @reg_space: The input argument into which all the registers are dumped. 5353 * Description: 5354 * Dumps the entire register space of xFrame NIC into the user given 5355 * buffer area. 5356 * Return value : 5357 * void . 5358 */ 5359 5360 static void s2io_ethtool_gregs(struct net_device *dev, 5361 struct ethtool_regs *regs, void *space) 5362 { 5363 int i; 5364 u64 reg; 5365 u8 *reg_space = (u8 *)space; 5366 struct s2io_nic *sp = netdev_priv(dev); 5367 5368 regs->len = XENA_REG_SPACE; 5369 regs->version = sp->pdev->subsystem_device; 5370 5371 for (i = 0; i < regs->len; i += 8) { 5372 reg = readq(sp->bar0 + i); 5373 memcpy((reg_space + i), ®, 8); 5374 } 5375 } 5376 5377 /* 5378 * s2io_set_led - control NIC led 5379 */ 5380 static void s2io_set_led(struct s2io_nic *sp, bool on) 5381 { 5382 struct XENA_dev_config __iomem *bar0 = sp->bar0; 5383 u16 subid = sp->pdev->subsystem_device; 5384 u64 val64; 5385 5386 if ((sp->device_type == XFRAME_II_DEVICE) || 5387 ((subid & 0xFF) >= 0x07)) { 5388 val64 = readq(&bar0->gpio_control); 5389 if (on) 5390 val64 |= GPIO_CTRL_GPIO_0; 5391 else 5392 val64 &= ~GPIO_CTRL_GPIO_0; 5393 5394 writeq(val64, &bar0->gpio_control); 5395 } else { 5396 val64 = readq(&bar0->adapter_control); 5397 if (on) 5398 val64 |= ADAPTER_LED_ON; 5399 else 5400 val64 &= ~ADAPTER_LED_ON; 5401 5402 writeq(val64, &bar0->adapter_control); 5403 } 5404 5405 } 5406 5407 /** 5408 * s2io_ethtool_set_led - To physically identify the nic on the system. 5409 * @dev : network device 5410 * @state: led setting 5411 * 5412 * Description: Used to physically identify the NIC on the system. 5413 * The Link LED will blink for a time specified by the user for 5414 * identification. 5415 * NOTE: The Link has to be Up to be able to blink the LED. Hence 5416 * identification is possible only if it's link is up. 5417 */ 5418 5419 static int s2io_ethtool_set_led(struct net_device *dev, 5420 enum ethtool_phys_id_state state) 5421 { 5422 struct s2io_nic *sp = netdev_priv(dev); 5423 struct XENA_dev_config __iomem *bar0 = sp->bar0; 5424 u16 subid = sp->pdev->subsystem_device; 5425 5426 if ((sp->device_type == XFRAME_I_DEVICE) && ((subid & 0xFF) < 0x07)) { 5427 u64 val64 = readq(&bar0->adapter_control); 5428 if (!(val64 & ADAPTER_CNTL_EN)) { 5429 pr_err("Adapter Link down, cannot blink LED\n"); 5430 return -EAGAIN; 5431 } 5432 } 5433 5434 switch (state) { 5435 case ETHTOOL_ID_ACTIVE: 5436 sp->adapt_ctrl_org = readq(&bar0->gpio_control); 5437 return 1; /* cycle on/off once per second */ 5438 5439 case ETHTOOL_ID_ON: 5440 s2io_set_led(sp, true); 5441 break; 5442 5443 case ETHTOOL_ID_OFF: 5444 s2io_set_led(sp, false); 5445 break; 5446 5447 case ETHTOOL_ID_INACTIVE: 5448 if (CARDS_WITH_FAULTY_LINK_INDICATORS(sp->device_type, subid)) 5449 writeq(sp->adapt_ctrl_org, &bar0->gpio_control); 5450 } 5451 5452 return 0; 5453 } 5454 5455 static void s2io_ethtool_gringparam(struct net_device *dev, 5456 struct ethtool_ringparam *ering) 5457 { 5458 struct s2io_nic *sp = netdev_priv(dev); 5459 int i, tx_desc_count = 0, rx_desc_count = 0; 5460 5461 if (sp->rxd_mode == RXD_MODE_1) { 5462 ering->rx_max_pending = MAX_RX_DESC_1; 5463 ering->rx_jumbo_max_pending = MAX_RX_DESC_1; 5464 } else { 5465 ering->rx_max_pending = MAX_RX_DESC_2; 5466 ering->rx_jumbo_max_pending = MAX_RX_DESC_2; 5467 } 5468 5469 ering->tx_max_pending = MAX_TX_DESC; 5470 5471 for (i = 0; i < sp->config.rx_ring_num; i++) 5472 rx_desc_count += sp->config.rx_cfg[i].num_rxd; 5473 ering->rx_pending = rx_desc_count; 5474 ering->rx_jumbo_pending = rx_desc_count; 5475 5476 for (i = 0; i < sp->config.tx_fifo_num; i++) 5477 tx_desc_count += sp->config.tx_cfg[i].fifo_len; 5478 ering->tx_pending = tx_desc_count; 5479 DBG_PRINT(INFO_DBG, "max txds: %d\n", sp->config.max_txds); 5480 } 5481 5482 /** 5483 * s2io_ethtool_getpause_data -Pause frame frame generation and reception. 5484 * @sp : private member of the device structure, which is a pointer to the 5485 * s2io_nic structure. 5486 * @ep : pointer to the structure with pause parameters given by ethtool. 5487 * Description: 5488 * Returns the Pause frame generation and reception capability of the NIC. 5489 * Return value: 5490 * void 5491 */ 5492 static void s2io_ethtool_getpause_data(struct net_device *dev, 5493 struct ethtool_pauseparam *ep) 5494 { 5495 u64 val64; 5496 struct s2io_nic *sp = netdev_priv(dev); 5497 struct XENA_dev_config __iomem *bar0 = sp->bar0; 5498 5499 val64 = readq(&bar0->rmac_pause_cfg); 5500 if (val64 & RMAC_PAUSE_GEN_ENABLE) 5501 ep->tx_pause = true; 5502 if (val64 & RMAC_PAUSE_RX_ENABLE) 5503 ep->rx_pause = true; 5504 ep->autoneg = false; 5505 } 5506 5507 /** 5508 * s2io_ethtool_setpause_data - set/reset pause frame generation. 5509 * @sp : private member of the device structure, which is a pointer to the 5510 * s2io_nic structure. 5511 * @ep : pointer to the structure with pause parameters given by ethtool. 5512 * Description: 5513 * It can be used to set or reset Pause frame generation or reception 5514 * support of the NIC. 5515 * Return value: 5516 * int, returns 0 on Success 5517 */ 5518 5519 static int s2io_ethtool_setpause_data(struct net_device *dev, 5520 struct ethtool_pauseparam *ep) 5521 { 5522 u64 val64; 5523 struct s2io_nic *sp = netdev_priv(dev); 5524 struct XENA_dev_config __iomem *bar0 = sp->bar0; 5525 5526 val64 = readq(&bar0->rmac_pause_cfg); 5527 if (ep->tx_pause) 5528 val64 |= RMAC_PAUSE_GEN_ENABLE; 5529 else 5530 val64 &= ~RMAC_PAUSE_GEN_ENABLE; 5531 if (ep->rx_pause) 5532 val64 |= RMAC_PAUSE_RX_ENABLE; 5533 else 5534 val64 &= ~RMAC_PAUSE_RX_ENABLE; 5535 writeq(val64, &bar0->rmac_pause_cfg); 5536 return 0; 5537 } 5538 5539 /** 5540 * read_eeprom - reads 4 bytes of data from user given offset. 5541 * @sp : private member of the device structure, which is a pointer to the 5542 * s2io_nic structure. 5543 * @off : offset at which the data must be written 5544 * @data : Its an output parameter where the data read at the given 5545 * offset is stored. 5546 * Description: 5547 * Will read 4 bytes of data from the user given offset and return the 5548 * read data. 5549 * NOTE: Will allow to read only part of the EEPROM visible through the 5550 * I2C bus. 5551 * Return value: 5552 * -1 on failure and 0 on success. 5553 */ 5554 5555 #define S2IO_DEV_ID 5 5556 static int read_eeprom(struct s2io_nic *sp, int off, u64 *data) 5557 { 5558 int ret = -1; 5559 u32 exit_cnt = 0; 5560 u64 val64; 5561 struct XENA_dev_config __iomem *bar0 = sp->bar0; 5562 5563 if (sp->device_type == XFRAME_I_DEVICE) { 5564 val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | 5565 I2C_CONTROL_ADDR(off) | 5566 I2C_CONTROL_BYTE_CNT(0x3) | 5567 I2C_CONTROL_READ | 5568 I2C_CONTROL_CNTL_START; 5569 SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF); 5570 5571 while (exit_cnt < 5) { 5572 val64 = readq(&bar0->i2c_control); 5573 if (I2C_CONTROL_CNTL_END(val64)) { 5574 *data = I2C_CONTROL_GET_DATA(val64); 5575 ret = 0; 5576 break; 5577 } 5578 msleep(50); 5579 exit_cnt++; 5580 } 5581 } 5582 5583 if (sp->device_type == XFRAME_II_DEVICE) { 5584 val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 | 5585 SPI_CONTROL_BYTECNT(0x3) | 5586 SPI_CONTROL_CMD(0x3) | SPI_CONTROL_ADDR(off); 5587 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF); 5588 val64 |= SPI_CONTROL_REQ; 5589 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF); 5590 while (exit_cnt < 5) { 5591 val64 = readq(&bar0->spi_control); 5592 if (val64 & SPI_CONTROL_NACK) { 5593 ret = 1; 5594 break; 5595 } else if (val64 & SPI_CONTROL_DONE) { 5596 *data = readq(&bar0->spi_data); 5597 *data &= 0xffffff; 5598 ret = 0; 5599 break; 5600 } 5601 msleep(50); 5602 exit_cnt++; 5603 } 5604 } 5605 return ret; 5606 } 5607 5608 /** 5609 * write_eeprom - actually writes the relevant part of the data value. 5610 * @sp : private member of the device structure, which is a pointer to the 5611 * s2io_nic structure. 5612 * @off : offset at which the data must be written 5613 * @data : The data that is to be written 5614 * @cnt : Number of bytes of the data that are actually to be written into 5615 * the Eeprom. (max of 3) 5616 * Description: 5617 * Actually writes the relevant part of the data value into the Eeprom 5618 * through the I2C bus. 5619 * Return value: 5620 * 0 on success, -1 on failure. 5621 */ 5622 5623 static int write_eeprom(struct s2io_nic *sp, int off, u64 data, int cnt) 5624 { 5625 int exit_cnt = 0, ret = -1; 5626 u64 val64; 5627 struct XENA_dev_config __iomem *bar0 = sp->bar0; 5628 5629 if (sp->device_type == XFRAME_I_DEVICE) { 5630 val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | 5631 I2C_CONTROL_ADDR(off) | 5632 I2C_CONTROL_BYTE_CNT(cnt) | 5633 I2C_CONTROL_SET_DATA((u32)data) | 5634 I2C_CONTROL_CNTL_START; 5635 SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF); 5636 5637 while (exit_cnt < 5) { 5638 val64 = readq(&bar0->i2c_control); 5639 if (I2C_CONTROL_CNTL_END(val64)) { 5640 if (!(val64 & I2C_CONTROL_NACK)) 5641 ret = 0; 5642 break; 5643 } 5644 msleep(50); 5645 exit_cnt++; 5646 } 5647 } 5648 5649 if (sp->device_type == XFRAME_II_DEVICE) { 5650 int write_cnt = (cnt == 8) ? 0 : cnt; 5651 writeq(SPI_DATA_WRITE(data, (cnt << 3)), &bar0->spi_data); 5652 5653 val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 | 5654 SPI_CONTROL_BYTECNT(write_cnt) | 5655 SPI_CONTROL_CMD(0x2) | SPI_CONTROL_ADDR(off); 5656 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF); 5657 val64 |= SPI_CONTROL_REQ; 5658 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF); 5659 while (exit_cnt < 5) { 5660 val64 = readq(&bar0->spi_control); 5661 if (val64 & SPI_CONTROL_NACK) { 5662 ret = 1; 5663 break; 5664 } else if (val64 & SPI_CONTROL_DONE) { 5665 ret = 0; 5666 break; 5667 } 5668 msleep(50); 5669 exit_cnt++; 5670 } 5671 } 5672 return ret; 5673 } 5674 static void s2io_vpd_read(struct s2io_nic *nic) 5675 { 5676 u8 *vpd_data; 5677 u8 data; 5678 int i = 0, cnt, len, fail = 0; 5679 int vpd_addr = 0x80; 5680 struct swStat *swstats = &nic->mac_control.stats_info->sw_stat; 5681 5682 if (nic->device_type == XFRAME_II_DEVICE) { 5683 strcpy(nic->product_name, "Xframe II 10GbE network adapter"); 5684 vpd_addr = 0x80; 5685 } else { 5686 strcpy(nic->product_name, "Xframe I 10GbE network adapter"); 5687 vpd_addr = 0x50; 5688 } 5689 strcpy(nic->serial_num, "NOT AVAILABLE"); 5690 5691 vpd_data = kmalloc(256, GFP_KERNEL); 5692 if (!vpd_data) { 5693 swstats->mem_alloc_fail_cnt++; 5694 return; 5695 } 5696 swstats->mem_allocated += 256; 5697 5698 for (i = 0; i < 256; i += 4) { 5699 pci_write_config_byte(nic->pdev, (vpd_addr + 2), i); 5700 pci_read_config_byte(nic->pdev, (vpd_addr + 2), &data); 5701 pci_write_config_byte(nic->pdev, (vpd_addr + 3), 0); 5702 for (cnt = 0; cnt < 5; cnt++) { 5703 msleep(2); 5704 pci_read_config_byte(nic->pdev, (vpd_addr + 3), &data); 5705 if (data == 0x80) 5706 break; 5707 } 5708 if (cnt >= 5) { 5709 DBG_PRINT(ERR_DBG, "Read of VPD data failed\n"); 5710 fail = 1; 5711 break; 5712 } 5713 pci_read_config_dword(nic->pdev, (vpd_addr + 4), 5714 (u32 *)&vpd_data[i]); 5715 } 5716 5717 if (!fail) { 5718 /* read serial number of adapter */ 5719 for (cnt = 0; cnt < 252; cnt++) { 5720 if ((vpd_data[cnt] == 'S') && 5721 (vpd_data[cnt+1] == 'N')) { 5722 len = vpd_data[cnt+2]; 5723 if (len < min(VPD_STRING_LEN, 256-cnt-2)) { 5724 memcpy(nic->serial_num, 5725 &vpd_data[cnt + 3], 5726 len); 5727 memset(nic->serial_num+len, 5728 0, 5729 VPD_STRING_LEN-len); 5730 break; 5731 } 5732 } 5733 } 5734 } 5735 5736 if ((!fail) && (vpd_data[1] < VPD_STRING_LEN)) { 5737 len = vpd_data[1]; 5738 memcpy(nic->product_name, &vpd_data[3], len); 5739 nic->product_name[len] = 0; 5740 } 5741 kfree(vpd_data); 5742 swstats->mem_freed += 256; 5743 } 5744 5745 /** 5746 * s2io_ethtool_geeprom - reads the value stored in the Eeprom. 5747 * @sp : private member of the device structure, which is a pointer to the 5748 * s2io_nic structure. 5749 * @eeprom : pointer to the user level structure provided by ethtool, 5750 * containing all relevant information. 5751 * @data_buf : user defined value to be written into Eeprom. 5752 * Description: Reads the values stored in the Eeprom at given offset 5753 * for a given length. Stores these values int the input argument data 5754 * buffer 'data_buf' and returns these to the caller (ethtool.) 5755 * Return value: 5756 * int 0 on success 5757 */ 5758 5759 static int s2io_ethtool_geeprom(struct net_device *dev, 5760 struct ethtool_eeprom *eeprom, u8 * data_buf) 5761 { 5762 u32 i, valid; 5763 u64 data; 5764 struct s2io_nic *sp = netdev_priv(dev); 5765 5766 eeprom->magic = sp->pdev->vendor | (sp->pdev->device << 16); 5767 5768 if ((eeprom->offset + eeprom->len) > (XENA_EEPROM_SPACE)) 5769 eeprom->len = XENA_EEPROM_SPACE - eeprom->offset; 5770 5771 for (i = 0; i < eeprom->len; i += 4) { 5772 if (read_eeprom(sp, (eeprom->offset + i), &data)) { 5773 DBG_PRINT(ERR_DBG, "Read of EEPROM failed\n"); 5774 return -EFAULT; 5775 } 5776 valid = INV(data); 5777 memcpy((data_buf + i), &valid, 4); 5778 } 5779 return 0; 5780 } 5781 5782 /** 5783 * s2io_ethtool_seeprom - tries to write the user provided value in Eeprom 5784 * @sp : private member of the device structure, which is a pointer to the 5785 * s2io_nic structure. 5786 * @eeprom : pointer to the user level structure provided by ethtool, 5787 * containing all relevant information. 5788 * @data_buf ; user defined value to be written into Eeprom. 5789 * Description: 5790 * Tries to write the user provided value in the Eeprom, at the offset 5791 * given by the user. 5792 * Return value: 5793 * 0 on success, -EFAULT on failure. 5794 */ 5795 5796 static int s2io_ethtool_seeprom(struct net_device *dev, 5797 struct ethtool_eeprom *eeprom, 5798 u8 *data_buf) 5799 { 5800 int len = eeprom->len, cnt = 0; 5801 u64 valid = 0, data; 5802 struct s2io_nic *sp = netdev_priv(dev); 5803 5804 if (eeprom->magic != (sp->pdev->vendor | (sp->pdev->device << 16))) { 5805 DBG_PRINT(ERR_DBG, 5806 "ETHTOOL_WRITE_EEPROM Err: " 5807 "Magic value is wrong, it is 0x%x should be 0x%x\n", 5808 (sp->pdev->vendor | (sp->pdev->device << 16)), 5809 eeprom->magic); 5810 return -EFAULT; 5811 } 5812 5813 while (len) { 5814 data = (u32)data_buf[cnt] & 0x000000FF; 5815 if (data) 5816 valid = (u32)(data << 24); 5817 else 5818 valid = data; 5819 5820 if (write_eeprom(sp, (eeprom->offset + cnt), valid, 0)) { 5821 DBG_PRINT(ERR_DBG, 5822 "ETHTOOL_WRITE_EEPROM Err: " 5823 "Cannot write into the specified offset\n"); 5824 return -EFAULT; 5825 } 5826 cnt++; 5827 len--; 5828 } 5829 5830 return 0; 5831 } 5832 5833 /** 5834 * s2io_register_test - reads and writes into all clock domains. 5835 * @sp : private member of the device structure, which is a pointer to the 5836 * s2io_nic structure. 5837 * @data : variable that returns the result of each of the test conducted b 5838 * by the driver. 5839 * Description: 5840 * Read and write into all clock domains. The NIC has 3 clock domains, 5841 * see that registers in all the three regions are accessible. 5842 * Return value: 5843 * 0 on success. 5844 */ 5845 5846 static int s2io_register_test(struct s2io_nic *sp, uint64_t *data) 5847 { 5848 struct XENA_dev_config __iomem *bar0 = sp->bar0; 5849 u64 val64 = 0, exp_val; 5850 int fail = 0; 5851 5852 val64 = readq(&bar0->pif_rd_swapper_fb); 5853 if (val64 != 0x123456789abcdefULL) { 5854 fail = 1; 5855 DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 1); 5856 } 5857 5858 val64 = readq(&bar0->rmac_pause_cfg); 5859 if (val64 != 0xc000ffff00000000ULL) { 5860 fail = 1; 5861 DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 2); 5862 } 5863 5864 val64 = readq(&bar0->rx_queue_cfg); 5865 if (sp->device_type == XFRAME_II_DEVICE) 5866 exp_val = 0x0404040404040404ULL; 5867 else 5868 exp_val = 0x0808080808080808ULL; 5869 if (val64 != exp_val) { 5870 fail = 1; 5871 DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 3); 5872 } 5873 5874 val64 = readq(&bar0->xgxs_efifo_cfg); 5875 if (val64 != 0x000000001923141EULL) { 5876 fail = 1; 5877 DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 4); 5878 } 5879 5880 val64 = 0x5A5A5A5A5A5A5A5AULL; 5881 writeq(val64, &bar0->xmsi_data); 5882 val64 = readq(&bar0->xmsi_data); 5883 if (val64 != 0x5A5A5A5A5A5A5A5AULL) { 5884 fail = 1; 5885 DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 1); 5886 } 5887 5888 val64 = 0xA5A5A5A5A5A5A5A5ULL; 5889 writeq(val64, &bar0->xmsi_data); 5890 val64 = readq(&bar0->xmsi_data); 5891 if (val64 != 0xA5A5A5A5A5A5A5A5ULL) { 5892 fail = 1; 5893 DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 2); 5894 } 5895 5896 *data = fail; 5897 return fail; 5898 } 5899 5900 /** 5901 * s2io_eeprom_test - to verify that EEprom in the xena can be programmed. 5902 * @sp : private member of the device structure, which is a pointer to the 5903 * s2io_nic structure. 5904 * @data:variable that returns the result of each of the test conducted by 5905 * the driver. 5906 * Description: 5907 * Verify that EEPROM in the xena can be programmed using I2C_CONTROL 5908 * register. 5909 * Return value: 5910 * 0 on success. 5911 */ 5912 5913 static int s2io_eeprom_test(struct s2io_nic *sp, uint64_t *data) 5914 { 5915 int fail = 0; 5916 u64 ret_data, org_4F0, org_7F0; 5917 u8 saved_4F0 = 0, saved_7F0 = 0; 5918 struct net_device *dev = sp->dev; 5919 5920 /* Test Write Error at offset 0 */ 5921 /* Note that SPI interface allows write access to all areas 5922 * of EEPROM. Hence doing all negative testing only for Xframe I. 5923 */ 5924 if (sp->device_type == XFRAME_I_DEVICE) 5925 if (!write_eeprom(sp, 0, 0, 3)) 5926 fail = 1; 5927 5928 /* Save current values at offsets 0x4F0 and 0x7F0 */ 5929 if (!read_eeprom(sp, 0x4F0, &org_4F0)) 5930 saved_4F0 = 1; 5931 if (!read_eeprom(sp, 0x7F0, &org_7F0)) 5932 saved_7F0 = 1; 5933 5934 /* Test Write at offset 4f0 */ 5935 if (write_eeprom(sp, 0x4F0, 0x012345, 3)) 5936 fail = 1; 5937 if (read_eeprom(sp, 0x4F0, &ret_data)) 5938 fail = 1; 5939 5940 if (ret_data != 0x012345) { 5941 DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. " 5942 "Data written %llx Data read %llx\n", 5943 dev->name, (unsigned long long)0x12345, 5944 (unsigned long long)ret_data); 5945 fail = 1; 5946 } 5947 5948 /* Reset the EEPROM data go FFFF */ 5949 write_eeprom(sp, 0x4F0, 0xFFFFFF, 3); 5950 5951 /* Test Write Request Error at offset 0x7c */ 5952 if (sp->device_type == XFRAME_I_DEVICE) 5953 if (!write_eeprom(sp, 0x07C, 0, 3)) 5954 fail = 1; 5955 5956 /* Test Write Request at offset 0x7f0 */ 5957 if (write_eeprom(sp, 0x7F0, 0x012345, 3)) 5958 fail = 1; 5959 if (read_eeprom(sp, 0x7F0, &ret_data)) 5960 fail = 1; 5961 5962 if (ret_data != 0x012345) { 5963 DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. " 5964 "Data written %llx Data read %llx\n", 5965 dev->name, (unsigned long long)0x12345, 5966 (unsigned long long)ret_data); 5967 fail = 1; 5968 } 5969 5970 /* Reset the EEPROM data go FFFF */ 5971 write_eeprom(sp, 0x7F0, 0xFFFFFF, 3); 5972 5973 if (sp->device_type == XFRAME_I_DEVICE) { 5974 /* Test Write Error at offset 0x80 */ 5975 if (!write_eeprom(sp, 0x080, 0, 3)) 5976 fail = 1; 5977 5978 /* Test Write Error at offset 0xfc */ 5979 if (!write_eeprom(sp, 0x0FC, 0, 3)) 5980 fail = 1; 5981 5982 /* Test Write Error at offset 0x100 */ 5983 if (!write_eeprom(sp, 0x100, 0, 3)) 5984 fail = 1; 5985 5986 /* Test Write Error at offset 4ec */ 5987 if (!write_eeprom(sp, 0x4EC, 0, 3)) 5988 fail = 1; 5989 } 5990 5991 /* Restore values at offsets 0x4F0 and 0x7F0 */ 5992 if (saved_4F0) 5993 write_eeprom(sp, 0x4F0, org_4F0, 3); 5994 if (saved_7F0) 5995 write_eeprom(sp, 0x7F0, org_7F0, 3); 5996 5997 *data = fail; 5998 return fail; 5999 } 6000 6001 /** 6002 * s2io_bist_test - invokes the MemBist test of the card . 6003 * @sp : private member of the device structure, which is a pointer to the 6004 * s2io_nic structure. 6005 * @data:variable that returns the result of each of the test conducted by 6006 * the driver. 6007 * Description: 6008 * This invokes the MemBist test of the card. We give around 6009 * 2 secs time for the Test to complete. If it's still not complete 6010 * within this peiod, we consider that the test failed. 6011 * Return value: 6012 * 0 on success and -1 on failure. 6013 */ 6014 6015 static int s2io_bist_test(struct s2io_nic *sp, uint64_t *data) 6016 { 6017 u8 bist = 0; 6018 int cnt = 0, ret = -1; 6019 6020 pci_read_config_byte(sp->pdev, PCI_BIST, &bist); 6021 bist |= PCI_BIST_START; 6022 pci_write_config_word(sp->pdev, PCI_BIST, bist); 6023 6024 while (cnt < 20) { 6025 pci_read_config_byte(sp->pdev, PCI_BIST, &bist); 6026 if (!(bist & PCI_BIST_START)) { 6027 *data = (bist & PCI_BIST_CODE_MASK); 6028 ret = 0; 6029 break; 6030 } 6031 msleep(100); 6032 cnt++; 6033 } 6034 6035 return ret; 6036 } 6037 6038 /** 6039 * s2io_link_test - verifies the link state of the nic 6040 * @sp ; private member of the device structure, which is a pointer to the 6041 * s2io_nic structure. 6042 * @data: variable that returns the result of each of the test conducted by 6043 * the driver. 6044 * Description: 6045 * The function verifies the link state of the NIC and updates the input 6046 * argument 'data' appropriately. 6047 * Return value: 6048 * 0 on success. 6049 */ 6050 6051 static int s2io_link_test(struct s2io_nic *sp, uint64_t *data) 6052 { 6053 struct XENA_dev_config __iomem *bar0 = sp->bar0; 6054 u64 val64; 6055 6056 val64 = readq(&bar0->adapter_status); 6057 if (!(LINK_IS_UP(val64))) 6058 *data = 1; 6059 else 6060 *data = 0; 6061 6062 return *data; 6063 } 6064 6065 /** 6066 * s2io_rldram_test - offline test for access to the RldRam chip on the NIC 6067 * @sp: private member of the device structure, which is a pointer to the 6068 * s2io_nic structure. 6069 * @data: variable that returns the result of each of the test 6070 * conducted by the driver. 6071 * Description: 6072 * This is one of the offline test that tests the read and write 6073 * access to the RldRam chip on the NIC. 6074 * Return value: 6075 * 0 on success. 6076 */ 6077 6078 static int s2io_rldram_test(struct s2io_nic *sp, uint64_t *data) 6079 { 6080 struct XENA_dev_config __iomem *bar0 = sp->bar0; 6081 u64 val64; 6082 int cnt, iteration = 0, test_fail = 0; 6083 6084 val64 = readq(&bar0->adapter_control); 6085 val64 &= ~ADAPTER_ECC_EN; 6086 writeq(val64, &bar0->adapter_control); 6087 6088 val64 = readq(&bar0->mc_rldram_test_ctrl); 6089 val64 |= MC_RLDRAM_TEST_MODE; 6090 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF); 6091 6092 val64 = readq(&bar0->mc_rldram_mrs); 6093 val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE; 6094 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF); 6095 6096 val64 |= MC_RLDRAM_MRS_ENABLE; 6097 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF); 6098 6099 while (iteration < 2) { 6100 val64 = 0x55555555aaaa0000ULL; 6101 if (iteration == 1) 6102 val64 ^= 0xFFFFFFFFFFFF0000ULL; 6103 writeq(val64, &bar0->mc_rldram_test_d0); 6104 6105 val64 = 0xaaaa5a5555550000ULL; 6106 if (iteration == 1) 6107 val64 ^= 0xFFFFFFFFFFFF0000ULL; 6108 writeq(val64, &bar0->mc_rldram_test_d1); 6109 6110 val64 = 0x55aaaaaaaa5a0000ULL; 6111 if (iteration == 1) 6112 val64 ^= 0xFFFFFFFFFFFF0000ULL; 6113 writeq(val64, &bar0->mc_rldram_test_d2); 6114 6115 val64 = (u64) (0x0000003ffffe0100ULL); 6116 writeq(val64, &bar0->mc_rldram_test_add); 6117 6118 val64 = MC_RLDRAM_TEST_MODE | 6119 MC_RLDRAM_TEST_WRITE | 6120 MC_RLDRAM_TEST_GO; 6121 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF); 6122 6123 for (cnt = 0; cnt < 5; cnt++) { 6124 val64 = readq(&bar0->mc_rldram_test_ctrl); 6125 if (val64 & MC_RLDRAM_TEST_DONE) 6126 break; 6127 msleep(200); 6128 } 6129 6130 if (cnt == 5) 6131 break; 6132 6133 val64 = MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_GO; 6134 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF); 6135 6136 for (cnt = 0; cnt < 5; cnt++) { 6137 val64 = readq(&bar0->mc_rldram_test_ctrl); 6138 if (val64 & MC_RLDRAM_TEST_DONE) 6139 break; 6140 msleep(500); 6141 } 6142 6143 if (cnt == 5) 6144 break; 6145 6146 val64 = readq(&bar0->mc_rldram_test_ctrl); 6147 if (!(val64 & MC_RLDRAM_TEST_PASS)) 6148 test_fail = 1; 6149 6150 iteration++; 6151 } 6152 6153 *data = test_fail; 6154 6155 /* Bring the adapter out of test mode */ 6156 SPECIAL_REG_WRITE(0, &bar0->mc_rldram_test_ctrl, LF); 6157 6158 return test_fail; 6159 } 6160 6161 /** 6162 * s2io_ethtool_test - conducts 6 tsets to determine the health of card. 6163 * @sp : private member of the device structure, which is a pointer to the 6164 * s2io_nic structure. 6165 * @ethtest : pointer to a ethtool command specific structure that will be 6166 * returned to the user. 6167 * @data : variable that returns the result of each of the test 6168 * conducted by the driver. 6169 * Description: 6170 * This function conducts 6 tests ( 4 offline and 2 online) to determine 6171 * the health of the card. 6172 * Return value: 6173 * void 6174 */ 6175 6176 static void s2io_ethtool_test(struct net_device *dev, 6177 struct ethtool_test *ethtest, 6178 uint64_t *data) 6179 { 6180 struct s2io_nic *sp = netdev_priv(dev); 6181 int orig_state = netif_running(sp->dev); 6182 6183 if (ethtest->flags == ETH_TEST_FL_OFFLINE) { 6184 /* Offline Tests. */ 6185 if (orig_state) 6186 s2io_close(sp->dev); 6187 6188 if (s2io_register_test(sp, &data[0])) 6189 ethtest->flags |= ETH_TEST_FL_FAILED; 6190 6191 s2io_reset(sp); 6192 6193 if (s2io_rldram_test(sp, &data[3])) 6194 ethtest->flags |= ETH_TEST_FL_FAILED; 6195 6196 s2io_reset(sp); 6197 6198 if (s2io_eeprom_test(sp, &data[1])) 6199 ethtest->flags |= ETH_TEST_FL_FAILED; 6200 6201 if (s2io_bist_test(sp, &data[4])) 6202 ethtest->flags |= ETH_TEST_FL_FAILED; 6203 6204 if (orig_state) 6205 s2io_open(sp->dev); 6206 6207 data[2] = 0; 6208 } else { 6209 /* Online Tests. */ 6210 if (!orig_state) { 6211 DBG_PRINT(ERR_DBG, "%s: is not up, cannot run test\n", 6212 dev->name); 6213 data[0] = -1; 6214 data[1] = -1; 6215 data[2] = -1; 6216 data[3] = -1; 6217 data[4] = -1; 6218 } 6219 6220 if (s2io_link_test(sp, &data[2])) 6221 ethtest->flags |= ETH_TEST_FL_FAILED; 6222 6223 data[0] = 0; 6224 data[1] = 0; 6225 data[3] = 0; 6226 data[4] = 0; 6227 } 6228 } 6229 6230 static void s2io_get_ethtool_stats(struct net_device *dev, 6231 struct ethtool_stats *estats, 6232 u64 *tmp_stats) 6233 { 6234 int i = 0, k; 6235 struct s2io_nic *sp = netdev_priv(dev); 6236 struct stat_block *stats = sp->mac_control.stats_info; 6237 struct swStat *swstats = &stats->sw_stat; 6238 struct xpakStat *xstats = &stats->xpak_stat; 6239 6240 s2io_updt_stats(sp); 6241 tmp_stats[i++] = 6242 (u64)le32_to_cpu(stats->tmac_frms_oflow) << 32 | 6243 le32_to_cpu(stats->tmac_frms); 6244 tmp_stats[i++] = 6245 (u64)le32_to_cpu(stats->tmac_data_octets_oflow) << 32 | 6246 le32_to_cpu(stats->tmac_data_octets); 6247 tmp_stats[i++] = le64_to_cpu(stats->tmac_drop_frms); 6248 tmp_stats[i++] = 6249 (u64)le32_to_cpu(stats->tmac_mcst_frms_oflow) << 32 | 6250 le32_to_cpu(stats->tmac_mcst_frms); 6251 tmp_stats[i++] = 6252 (u64)le32_to_cpu(stats->tmac_bcst_frms_oflow) << 32 | 6253 le32_to_cpu(stats->tmac_bcst_frms); 6254 tmp_stats[i++] = le64_to_cpu(stats->tmac_pause_ctrl_frms); 6255 tmp_stats[i++] = 6256 (u64)le32_to_cpu(stats->tmac_ttl_octets_oflow) << 32 | 6257 le32_to_cpu(stats->tmac_ttl_octets); 6258 tmp_stats[i++] = 6259 (u64)le32_to_cpu(stats->tmac_ucst_frms_oflow) << 32 | 6260 le32_to_cpu(stats->tmac_ucst_frms); 6261 tmp_stats[i++] = 6262 (u64)le32_to_cpu(stats->tmac_nucst_frms_oflow) << 32 | 6263 le32_to_cpu(stats->tmac_nucst_frms); 6264 tmp_stats[i++] = 6265 (u64)le32_to_cpu(stats->tmac_any_err_frms_oflow) << 32 | 6266 le32_to_cpu(stats->tmac_any_err_frms); 6267 tmp_stats[i++] = le64_to_cpu(stats->tmac_ttl_less_fb_octets); 6268 tmp_stats[i++] = le64_to_cpu(stats->tmac_vld_ip_octets); 6269 tmp_stats[i++] = 6270 (u64)le32_to_cpu(stats->tmac_vld_ip_oflow) << 32 | 6271 le32_to_cpu(stats->tmac_vld_ip); 6272 tmp_stats[i++] = 6273 (u64)le32_to_cpu(stats->tmac_drop_ip_oflow) << 32 | 6274 le32_to_cpu(stats->tmac_drop_ip); 6275 tmp_stats[i++] = 6276 (u64)le32_to_cpu(stats->tmac_icmp_oflow) << 32 | 6277 le32_to_cpu(stats->tmac_icmp); 6278 tmp_stats[i++] = 6279 (u64)le32_to_cpu(stats->tmac_rst_tcp_oflow) << 32 | 6280 le32_to_cpu(stats->tmac_rst_tcp); 6281 tmp_stats[i++] = le64_to_cpu(stats->tmac_tcp); 6282 tmp_stats[i++] = (u64)le32_to_cpu(stats->tmac_udp_oflow) << 32 | 6283 le32_to_cpu(stats->tmac_udp); 6284 tmp_stats[i++] = 6285 (u64)le32_to_cpu(stats->rmac_vld_frms_oflow) << 32 | 6286 le32_to_cpu(stats->rmac_vld_frms); 6287 tmp_stats[i++] = 6288 (u64)le32_to_cpu(stats->rmac_data_octets_oflow) << 32 | 6289 le32_to_cpu(stats->rmac_data_octets); 6290 tmp_stats[i++] = le64_to_cpu(stats->rmac_fcs_err_frms); 6291 tmp_stats[i++] = le64_to_cpu(stats->rmac_drop_frms); 6292 tmp_stats[i++] = 6293 (u64)le32_to_cpu(stats->rmac_vld_mcst_frms_oflow) << 32 | 6294 le32_to_cpu(stats->rmac_vld_mcst_frms); 6295 tmp_stats[i++] = 6296 (u64)le32_to_cpu(stats->rmac_vld_bcst_frms_oflow) << 32 | 6297 le32_to_cpu(stats->rmac_vld_bcst_frms); 6298 tmp_stats[i++] = le32_to_cpu(stats->rmac_in_rng_len_err_frms); 6299 tmp_stats[i++] = le32_to_cpu(stats->rmac_out_rng_len_err_frms); 6300 tmp_stats[i++] = le64_to_cpu(stats->rmac_long_frms); 6301 tmp_stats[i++] = le64_to_cpu(stats->rmac_pause_ctrl_frms); 6302 tmp_stats[i++] = le64_to_cpu(stats->rmac_unsup_ctrl_frms); 6303 tmp_stats[i++] = 6304 (u64)le32_to_cpu(stats->rmac_ttl_octets_oflow) << 32 | 6305 le32_to_cpu(stats->rmac_ttl_octets); 6306 tmp_stats[i++] = 6307 (u64)le32_to_cpu(stats->rmac_accepted_ucst_frms_oflow) << 32 6308 | le32_to_cpu(stats->rmac_accepted_ucst_frms); 6309 tmp_stats[i++] = 6310 (u64)le32_to_cpu(stats->rmac_accepted_nucst_frms_oflow) 6311 << 32 | le32_to_cpu(stats->rmac_accepted_nucst_frms); 6312 tmp_stats[i++] = 6313 (u64)le32_to_cpu(stats->rmac_discarded_frms_oflow) << 32 | 6314 le32_to_cpu(stats->rmac_discarded_frms); 6315 tmp_stats[i++] = 6316 (u64)le32_to_cpu(stats->rmac_drop_events_oflow) 6317 << 32 | le32_to_cpu(stats->rmac_drop_events); 6318 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_less_fb_octets); 6319 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_frms); 6320 tmp_stats[i++] = 6321 (u64)le32_to_cpu(stats->rmac_usized_frms_oflow) << 32 | 6322 le32_to_cpu(stats->rmac_usized_frms); 6323 tmp_stats[i++] = 6324 (u64)le32_to_cpu(stats->rmac_osized_frms_oflow) << 32 | 6325 le32_to_cpu(stats->rmac_osized_frms); 6326 tmp_stats[i++] = 6327 (u64)le32_to_cpu(stats->rmac_frag_frms_oflow) << 32 | 6328 le32_to_cpu(stats->rmac_frag_frms); 6329 tmp_stats[i++] = 6330 (u64)le32_to_cpu(stats->rmac_jabber_frms_oflow) << 32 | 6331 le32_to_cpu(stats->rmac_jabber_frms); 6332 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_64_frms); 6333 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_65_127_frms); 6334 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_128_255_frms); 6335 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_256_511_frms); 6336 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_512_1023_frms); 6337 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_1024_1518_frms); 6338 tmp_stats[i++] = 6339 (u64)le32_to_cpu(stats->rmac_ip_oflow) << 32 | 6340 le32_to_cpu(stats->rmac_ip); 6341 tmp_stats[i++] = le64_to_cpu(stats->rmac_ip_octets); 6342 tmp_stats[i++] = le32_to_cpu(stats->rmac_hdr_err_ip); 6343 tmp_stats[i++] = 6344 (u64)le32_to_cpu(stats->rmac_drop_ip_oflow) << 32 | 6345 le32_to_cpu(stats->rmac_drop_ip); 6346 tmp_stats[i++] = 6347 (u64)le32_to_cpu(stats->rmac_icmp_oflow) << 32 | 6348 le32_to_cpu(stats->rmac_icmp); 6349 tmp_stats[i++] = le64_to_cpu(stats->rmac_tcp); 6350 tmp_stats[i++] = 6351 (u64)le32_to_cpu(stats->rmac_udp_oflow) << 32 | 6352 le32_to_cpu(stats->rmac_udp); 6353 tmp_stats[i++] = 6354 (u64)le32_to_cpu(stats->rmac_err_drp_udp_oflow) << 32 | 6355 le32_to_cpu(stats->rmac_err_drp_udp); 6356 tmp_stats[i++] = le64_to_cpu(stats->rmac_xgmii_err_sym); 6357 tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q0); 6358 tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q1); 6359 tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q2); 6360 tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q3); 6361 tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q4); 6362 tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q5); 6363 tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q6); 6364 tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q7); 6365 tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q0); 6366 tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q1); 6367 tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q2); 6368 tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q3); 6369 tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q4); 6370 tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q5); 6371 tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q6); 6372 tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q7); 6373 tmp_stats[i++] = 6374 (u64)le32_to_cpu(stats->rmac_pause_cnt_oflow) << 32 | 6375 le32_to_cpu(stats->rmac_pause_cnt); 6376 tmp_stats[i++] = le64_to_cpu(stats->rmac_xgmii_data_err_cnt); 6377 tmp_stats[i++] = le64_to_cpu(stats->rmac_xgmii_ctrl_err_cnt); 6378 tmp_stats[i++] = 6379 (u64)le32_to_cpu(stats->rmac_accepted_ip_oflow) << 32 | 6380 le32_to_cpu(stats->rmac_accepted_ip); 6381 tmp_stats[i++] = le32_to_cpu(stats->rmac_err_tcp); 6382 tmp_stats[i++] = le32_to_cpu(stats->rd_req_cnt); 6383 tmp_stats[i++] = le32_to_cpu(stats->new_rd_req_cnt); 6384 tmp_stats[i++] = le32_to_cpu(stats->new_rd_req_rtry_cnt); 6385 tmp_stats[i++] = le32_to_cpu(stats->rd_rtry_cnt); 6386 tmp_stats[i++] = le32_to_cpu(stats->wr_rtry_rd_ack_cnt); 6387 tmp_stats[i++] = le32_to_cpu(stats->wr_req_cnt); 6388 tmp_stats[i++] = le32_to_cpu(stats->new_wr_req_cnt); 6389 tmp_stats[i++] = le32_to_cpu(stats->new_wr_req_rtry_cnt); 6390 tmp_stats[i++] = le32_to_cpu(stats->wr_rtry_cnt); 6391 tmp_stats[i++] = le32_to_cpu(stats->wr_disc_cnt); 6392 tmp_stats[i++] = le32_to_cpu(stats->rd_rtry_wr_ack_cnt); 6393 tmp_stats[i++] = le32_to_cpu(stats->txp_wr_cnt); 6394 tmp_stats[i++] = le32_to_cpu(stats->txd_rd_cnt); 6395 tmp_stats[i++] = le32_to_cpu(stats->txd_wr_cnt); 6396 tmp_stats[i++] = le32_to_cpu(stats->rxd_rd_cnt); 6397 tmp_stats[i++] = le32_to_cpu(stats->rxd_wr_cnt); 6398 tmp_stats[i++] = le32_to_cpu(stats->txf_rd_cnt); 6399 tmp_stats[i++] = le32_to_cpu(stats->rxf_wr_cnt); 6400 6401 /* Enhanced statistics exist only for Hercules */ 6402 if (sp->device_type == XFRAME_II_DEVICE) { 6403 tmp_stats[i++] = 6404 le64_to_cpu(stats->rmac_ttl_1519_4095_frms); 6405 tmp_stats[i++] = 6406 le64_to_cpu(stats->rmac_ttl_4096_8191_frms); 6407 tmp_stats[i++] = 6408 le64_to_cpu(stats->rmac_ttl_8192_max_frms); 6409 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_gt_max_frms); 6410 tmp_stats[i++] = le64_to_cpu(stats->rmac_osized_alt_frms); 6411 tmp_stats[i++] = le64_to_cpu(stats->rmac_jabber_alt_frms); 6412 tmp_stats[i++] = le64_to_cpu(stats->rmac_gt_max_alt_frms); 6413 tmp_stats[i++] = le64_to_cpu(stats->rmac_vlan_frms); 6414 tmp_stats[i++] = le32_to_cpu(stats->rmac_len_discard); 6415 tmp_stats[i++] = le32_to_cpu(stats->rmac_fcs_discard); 6416 tmp_stats[i++] = le32_to_cpu(stats->rmac_pf_discard); 6417 tmp_stats[i++] = le32_to_cpu(stats->rmac_da_discard); 6418 tmp_stats[i++] = le32_to_cpu(stats->rmac_red_discard); 6419 tmp_stats[i++] = le32_to_cpu(stats->rmac_rts_discard); 6420 tmp_stats[i++] = le32_to_cpu(stats->rmac_ingm_full_discard); 6421 tmp_stats[i++] = le32_to_cpu(stats->link_fault_cnt); 6422 } 6423 6424 tmp_stats[i++] = 0; 6425 tmp_stats[i++] = swstats->single_ecc_errs; 6426 tmp_stats[i++] = swstats->double_ecc_errs; 6427 tmp_stats[i++] = swstats->parity_err_cnt; 6428 tmp_stats[i++] = swstats->serious_err_cnt; 6429 tmp_stats[i++] = swstats->soft_reset_cnt; 6430 tmp_stats[i++] = swstats->fifo_full_cnt; 6431 for (k = 0; k < MAX_RX_RINGS; k++) 6432 tmp_stats[i++] = swstats->ring_full_cnt[k]; 6433 tmp_stats[i++] = xstats->alarm_transceiver_temp_high; 6434 tmp_stats[i++] = xstats->alarm_transceiver_temp_low; 6435 tmp_stats[i++] = xstats->alarm_laser_bias_current_high; 6436 tmp_stats[i++] = xstats->alarm_laser_bias_current_low; 6437 tmp_stats[i++] = xstats->alarm_laser_output_power_high; 6438 tmp_stats[i++] = xstats->alarm_laser_output_power_low; 6439 tmp_stats[i++] = xstats->warn_transceiver_temp_high; 6440 tmp_stats[i++] = xstats->warn_transceiver_temp_low; 6441 tmp_stats[i++] = xstats->warn_laser_bias_current_high; 6442 tmp_stats[i++] = xstats->warn_laser_bias_current_low; 6443 tmp_stats[i++] = xstats->warn_laser_output_power_high; 6444 tmp_stats[i++] = xstats->warn_laser_output_power_low; 6445 tmp_stats[i++] = swstats->clubbed_frms_cnt; 6446 tmp_stats[i++] = swstats->sending_both; 6447 tmp_stats[i++] = swstats->outof_sequence_pkts; 6448 tmp_stats[i++] = swstats->flush_max_pkts; 6449 if (swstats->num_aggregations) { 6450 u64 tmp = swstats->sum_avg_pkts_aggregated; 6451 int count = 0; 6452 /* 6453 * Since 64-bit divide does not work on all platforms, 6454 * do repeated subtraction. 6455 */ 6456 while (tmp >= swstats->num_aggregations) { 6457 tmp -= swstats->num_aggregations; 6458 count++; 6459 } 6460 tmp_stats[i++] = count; 6461 } else 6462 tmp_stats[i++] = 0; 6463 tmp_stats[i++] = swstats->mem_alloc_fail_cnt; 6464 tmp_stats[i++] = swstats->pci_map_fail_cnt; 6465 tmp_stats[i++] = swstats->watchdog_timer_cnt; 6466 tmp_stats[i++] = swstats->mem_allocated; 6467 tmp_stats[i++] = swstats->mem_freed; 6468 tmp_stats[i++] = swstats->link_up_cnt; 6469 tmp_stats[i++] = swstats->link_down_cnt; 6470 tmp_stats[i++] = swstats->link_up_time; 6471 tmp_stats[i++] = swstats->link_down_time; 6472 6473 tmp_stats[i++] = swstats->tx_buf_abort_cnt; 6474 tmp_stats[i++] = swstats->tx_desc_abort_cnt; 6475 tmp_stats[i++] = swstats->tx_parity_err_cnt; 6476 tmp_stats[i++] = swstats->tx_link_loss_cnt; 6477 tmp_stats[i++] = swstats->tx_list_proc_err_cnt; 6478 6479 tmp_stats[i++] = swstats->rx_parity_err_cnt; 6480 tmp_stats[i++] = swstats->rx_abort_cnt; 6481 tmp_stats[i++] = swstats->rx_parity_abort_cnt; 6482 tmp_stats[i++] = swstats->rx_rda_fail_cnt; 6483 tmp_stats[i++] = swstats->rx_unkn_prot_cnt; 6484 tmp_stats[i++] = swstats->rx_fcs_err_cnt; 6485 tmp_stats[i++] = swstats->rx_buf_size_err_cnt; 6486 tmp_stats[i++] = swstats->rx_rxd_corrupt_cnt; 6487 tmp_stats[i++] = swstats->rx_unkn_err_cnt; 6488 tmp_stats[i++] = swstats->tda_err_cnt; 6489 tmp_stats[i++] = swstats->pfc_err_cnt; 6490 tmp_stats[i++] = swstats->pcc_err_cnt; 6491 tmp_stats[i++] = swstats->tti_err_cnt; 6492 tmp_stats[i++] = swstats->tpa_err_cnt; 6493 tmp_stats[i++] = swstats->sm_err_cnt; 6494 tmp_stats[i++] = swstats->lso_err_cnt; 6495 tmp_stats[i++] = swstats->mac_tmac_err_cnt; 6496 tmp_stats[i++] = swstats->mac_rmac_err_cnt; 6497 tmp_stats[i++] = swstats->xgxs_txgxs_err_cnt; 6498 tmp_stats[i++] = swstats->xgxs_rxgxs_err_cnt; 6499 tmp_stats[i++] = swstats->rc_err_cnt; 6500 tmp_stats[i++] = swstats->prc_pcix_err_cnt; 6501 tmp_stats[i++] = swstats->rpa_err_cnt; 6502 tmp_stats[i++] = swstats->rda_err_cnt; 6503 tmp_stats[i++] = swstats->rti_err_cnt; 6504 tmp_stats[i++] = swstats->mc_err_cnt; 6505 } 6506 6507 static int s2io_ethtool_get_regs_len(struct net_device *dev) 6508 { 6509 return XENA_REG_SPACE; 6510 } 6511 6512 6513 static int s2io_get_eeprom_len(struct net_device *dev) 6514 { 6515 return XENA_EEPROM_SPACE; 6516 } 6517 6518 static int s2io_get_sset_count(struct net_device *dev, int sset) 6519 { 6520 struct s2io_nic *sp = netdev_priv(dev); 6521 6522 switch (sset) { 6523 case ETH_SS_TEST: 6524 return S2IO_TEST_LEN; 6525 case ETH_SS_STATS: 6526 switch (sp->device_type) { 6527 case XFRAME_I_DEVICE: 6528 return XFRAME_I_STAT_LEN; 6529 case XFRAME_II_DEVICE: 6530 return XFRAME_II_STAT_LEN; 6531 default: 6532 return 0; 6533 } 6534 default: 6535 return -EOPNOTSUPP; 6536 } 6537 } 6538 6539 static void s2io_ethtool_get_strings(struct net_device *dev, 6540 u32 stringset, u8 *data) 6541 { 6542 int stat_size = 0; 6543 struct s2io_nic *sp = netdev_priv(dev); 6544 6545 switch (stringset) { 6546 case ETH_SS_TEST: 6547 memcpy(data, s2io_gstrings, S2IO_STRINGS_LEN); 6548 break; 6549 case ETH_SS_STATS: 6550 stat_size = sizeof(ethtool_xena_stats_keys); 6551 memcpy(data, ðtool_xena_stats_keys, stat_size); 6552 if (sp->device_type == XFRAME_II_DEVICE) { 6553 memcpy(data + stat_size, 6554 ðtool_enhanced_stats_keys, 6555 sizeof(ethtool_enhanced_stats_keys)); 6556 stat_size += sizeof(ethtool_enhanced_stats_keys); 6557 } 6558 6559 memcpy(data + stat_size, ðtool_driver_stats_keys, 6560 sizeof(ethtool_driver_stats_keys)); 6561 } 6562 } 6563 6564 static int s2io_set_features(struct net_device *dev, netdev_features_t features) 6565 { 6566 struct s2io_nic *sp = netdev_priv(dev); 6567 netdev_features_t changed = (features ^ dev->features) & NETIF_F_LRO; 6568 6569 if (changed && netif_running(dev)) { 6570 int rc; 6571 6572 s2io_stop_all_tx_queue(sp); 6573 s2io_card_down(sp); 6574 dev->features = features; 6575 rc = s2io_card_up(sp); 6576 if (rc) 6577 s2io_reset(sp); 6578 else 6579 s2io_start_all_tx_queue(sp); 6580 6581 return rc ? rc : 1; 6582 } 6583 6584 return 0; 6585 } 6586 6587 static const struct ethtool_ops netdev_ethtool_ops = { 6588 .get_drvinfo = s2io_ethtool_gdrvinfo, 6589 .get_regs_len = s2io_ethtool_get_regs_len, 6590 .get_regs = s2io_ethtool_gregs, 6591 .get_link = ethtool_op_get_link, 6592 .get_eeprom_len = s2io_get_eeprom_len, 6593 .get_eeprom = s2io_ethtool_geeprom, 6594 .set_eeprom = s2io_ethtool_seeprom, 6595 .get_ringparam = s2io_ethtool_gringparam, 6596 .get_pauseparam = s2io_ethtool_getpause_data, 6597 .set_pauseparam = s2io_ethtool_setpause_data, 6598 .self_test = s2io_ethtool_test, 6599 .get_strings = s2io_ethtool_get_strings, 6600 .set_phys_id = s2io_ethtool_set_led, 6601 .get_ethtool_stats = s2io_get_ethtool_stats, 6602 .get_sset_count = s2io_get_sset_count, 6603 .get_link_ksettings = s2io_ethtool_get_link_ksettings, 6604 .set_link_ksettings = s2io_ethtool_set_link_ksettings, 6605 }; 6606 6607 /** 6608 * s2io_ioctl - Entry point for the Ioctl 6609 * @dev : Device pointer. 6610 * @ifr : An IOCTL specefic structure, that can contain a pointer to 6611 * a proprietary structure used to pass information to the driver. 6612 * @cmd : This is used to distinguish between the different commands that 6613 * can be passed to the IOCTL functions. 6614 * Description: 6615 * Currently there are no special functionality supported in IOCTL, hence 6616 * function always return EOPNOTSUPPORTED 6617 */ 6618 6619 static int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) 6620 { 6621 return -EOPNOTSUPP; 6622 } 6623 6624 /** 6625 * s2io_change_mtu - entry point to change MTU size for the device. 6626 * @dev : device pointer. 6627 * @new_mtu : the new MTU size for the device. 6628 * Description: A driver entry point to change MTU size for the device. 6629 * Before changing the MTU the device must be stopped. 6630 * Return value: 6631 * 0 on success and an appropriate (-)ve integer as defined in errno.h 6632 * file on failure. 6633 */ 6634 6635 static int s2io_change_mtu(struct net_device *dev, int new_mtu) 6636 { 6637 struct s2io_nic *sp = netdev_priv(dev); 6638 int ret = 0; 6639 6640 dev->mtu = new_mtu; 6641 if (netif_running(dev)) { 6642 s2io_stop_all_tx_queue(sp); 6643 s2io_card_down(sp); 6644 ret = s2io_card_up(sp); 6645 if (ret) { 6646 DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", 6647 __func__); 6648 return ret; 6649 } 6650 s2io_wake_all_tx_queue(sp); 6651 } else { /* Device is down */ 6652 struct XENA_dev_config __iomem *bar0 = sp->bar0; 6653 u64 val64 = new_mtu; 6654 6655 writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len); 6656 } 6657 6658 return ret; 6659 } 6660 6661 /** 6662 * s2io_set_link - Set the LInk status 6663 * @data: long pointer to device private structue 6664 * Description: Sets the link status for the adapter 6665 */ 6666 6667 static void s2io_set_link(struct work_struct *work) 6668 { 6669 struct s2io_nic *nic = container_of(work, struct s2io_nic, 6670 set_link_task); 6671 struct net_device *dev = nic->dev; 6672 struct XENA_dev_config __iomem *bar0 = nic->bar0; 6673 register u64 val64; 6674 u16 subid; 6675 6676 rtnl_lock(); 6677 6678 if (!netif_running(dev)) 6679 goto out_unlock; 6680 6681 if (test_and_set_bit(__S2IO_STATE_LINK_TASK, &(nic->state))) { 6682 /* The card is being reset, no point doing anything */ 6683 goto out_unlock; 6684 } 6685 6686 subid = nic->pdev->subsystem_device; 6687 if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) { 6688 /* 6689 * Allow a small delay for the NICs self initiated 6690 * cleanup to complete. 6691 */ 6692 msleep(100); 6693 } 6694 6695 val64 = readq(&bar0->adapter_status); 6696 if (LINK_IS_UP(val64)) { 6697 if (!(readq(&bar0->adapter_control) & ADAPTER_CNTL_EN)) { 6698 if (verify_xena_quiescence(nic)) { 6699 val64 = readq(&bar0->adapter_control); 6700 val64 |= ADAPTER_CNTL_EN; 6701 writeq(val64, &bar0->adapter_control); 6702 if (CARDS_WITH_FAULTY_LINK_INDICATORS( 6703 nic->device_type, subid)) { 6704 val64 = readq(&bar0->gpio_control); 6705 val64 |= GPIO_CTRL_GPIO_0; 6706 writeq(val64, &bar0->gpio_control); 6707 val64 = readq(&bar0->gpio_control); 6708 } else { 6709 val64 |= ADAPTER_LED_ON; 6710 writeq(val64, &bar0->adapter_control); 6711 } 6712 nic->device_enabled_once = true; 6713 } else { 6714 DBG_PRINT(ERR_DBG, 6715 "%s: Error: device is not Quiescent\n", 6716 dev->name); 6717 s2io_stop_all_tx_queue(nic); 6718 } 6719 } 6720 val64 = readq(&bar0->adapter_control); 6721 val64 |= ADAPTER_LED_ON; 6722 writeq(val64, &bar0->adapter_control); 6723 s2io_link(nic, LINK_UP); 6724 } else { 6725 if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type, 6726 subid)) { 6727 val64 = readq(&bar0->gpio_control); 6728 val64 &= ~GPIO_CTRL_GPIO_0; 6729 writeq(val64, &bar0->gpio_control); 6730 val64 = readq(&bar0->gpio_control); 6731 } 6732 /* turn off LED */ 6733 val64 = readq(&bar0->adapter_control); 6734 val64 = val64 & (~ADAPTER_LED_ON); 6735 writeq(val64, &bar0->adapter_control); 6736 s2io_link(nic, LINK_DOWN); 6737 } 6738 clear_bit(__S2IO_STATE_LINK_TASK, &(nic->state)); 6739 6740 out_unlock: 6741 rtnl_unlock(); 6742 } 6743 6744 static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp, 6745 struct buffAdd *ba, 6746 struct sk_buff **skb, u64 *temp0, u64 *temp1, 6747 u64 *temp2, int size) 6748 { 6749 struct net_device *dev = sp->dev; 6750 struct swStat *stats = &sp->mac_control.stats_info->sw_stat; 6751 6752 if ((sp->rxd_mode == RXD_MODE_1) && (rxdp->Host_Control == 0)) { 6753 struct RxD1 *rxdp1 = (struct RxD1 *)rxdp; 6754 /* allocate skb */ 6755 if (*skb) { 6756 DBG_PRINT(INFO_DBG, "SKB is not NULL\n"); 6757 /* 6758 * As Rx frame are not going to be processed, 6759 * using same mapped address for the Rxd 6760 * buffer pointer 6761 */ 6762 rxdp1->Buffer0_ptr = *temp0; 6763 } else { 6764 *skb = netdev_alloc_skb(dev, size); 6765 if (!(*skb)) { 6766 DBG_PRINT(INFO_DBG, 6767 "%s: Out of memory to allocate %s\n", 6768 dev->name, "1 buf mode SKBs"); 6769 stats->mem_alloc_fail_cnt++; 6770 return -ENOMEM ; 6771 } 6772 stats->mem_allocated += (*skb)->truesize; 6773 /* storing the mapped addr in a temp variable 6774 * such it will be used for next rxd whose 6775 * Host Control is NULL 6776 */ 6777 rxdp1->Buffer0_ptr = *temp0 = 6778 pci_map_single(sp->pdev, (*skb)->data, 6779 size - NET_IP_ALIGN, 6780 PCI_DMA_FROMDEVICE); 6781 if (pci_dma_mapping_error(sp->pdev, rxdp1->Buffer0_ptr)) 6782 goto memalloc_failed; 6783 rxdp->Host_Control = (unsigned long) (*skb); 6784 } 6785 } else if ((sp->rxd_mode == RXD_MODE_3B) && (rxdp->Host_Control == 0)) { 6786 struct RxD3 *rxdp3 = (struct RxD3 *)rxdp; 6787 /* Two buffer Mode */ 6788 if (*skb) { 6789 rxdp3->Buffer2_ptr = *temp2; 6790 rxdp3->Buffer0_ptr = *temp0; 6791 rxdp3->Buffer1_ptr = *temp1; 6792 } else { 6793 *skb = netdev_alloc_skb(dev, size); 6794 if (!(*skb)) { 6795 DBG_PRINT(INFO_DBG, 6796 "%s: Out of memory to allocate %s\n", 6797 dev->name, 6798 "2 buf mode SKBs"); 6799 stats->mem_alloc_fail_cnt++; 6800 return -ENOMEM; 6801 } 6802 stats->mem_allocated += (*skb)->truesize; 6803 rxdp3->Buffer2_ptr = *temp2 = 6804 pci_map_single(sp->pdev, (*skb)->data, 6805 dev->mtu + 4, 6806 PCI_DMA_FROMDEVICE); 6807 if (pci_dma_mapping_error(sp->pdev, rxdp3->Buffer2_ptr)) 6808 goto memalloc_failed; 6809 rxdp3->Buffer0_ptr = *temp0 = 6810 pci_map_single(sp->pdev, ba->ba_0, BUF0_LEN, 6811 PCI_DMA_FROMDEVICE); 6812 if (pci_dma_mapping_error(sp->pdev, 6813 rxdp3->Buffer0_ptr)) { 6814 pci_unmap_single(sp->pdev, 6815 (dma_addr_t)rxdp3->Buffer2_ptr, 6816 dev->mtu + 4, 6817 PCI_DMA_FROMDEVICE); 6818 goto memalloc_failed; 6819 } 6820 rxdp->Host_Control = (unsigned long) (*skb); 6821 6822 /* Buffer-1 will be dummy buffer not used */ 6823 rxdp3->Buffer1_ptr = *temp1 = 6824 pci_map_single(sp->pdev, ba->ba_1, BUF1_LEN, 6825 PCI_DMA_FROMDEVICE); 6826 if (pci_dma_mapping_error(sp->pdev, 6827 rxdp3->Buffer1_ptr)) { 6828 pci_unmap_single(sp->pdev, 6829 (dma_addr_t)rxdp3->Buffer0_ptr, 6830 BUF0_LEN, PCI_DMA_FROMDEVICE); 6831 pci_unmap_single(sp->pdev, 6832 (dma_addr_t)rxdp3->Buffer2_ptr, 6833 dev->mtu + 4, 6834 PCI_DMA_FROMDEVICE); 6835 goto memalloc_failed; 6836 } 6837 } 6838 } 6839 return 0; 6840 6841 memalloc_failed: 6842 stats->pci_map_fail_cnt++; 6843 stats->mem_freed += (*skb)->truesize; 6844 dev_kfree_skb(*skb); 6845 return -ENOMEM; 6846 } 6847 6848 static void set_rxd_buffer_size(struct s2io_nic *sp, struct RxD_t *rxdp, 6849 int size) 6850 { 6851 struct net_device *dev = sp->dev; 6852 if (sp->rxd_mode == RXD_MODE_1) { 6853 rxdp->Control_2 = SET_BUFFER0_SIZE_1(size - NET_IP_ALIGN); 6854 } else if (sp->rxd_mode == RXD_MODE_3B) { 6855 rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN); 6856 rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1); 6857 rxdp->Control_2 |= SET_BUFFER2_SIZE_3(dev->mtu + 4); 6858 } 6859 } 6860 6861 static int rxd_owner_bit_reset(struct s2io_nic *sp) 6862 { 6863 int i, j, k, blk_cnt = 0, size; 6864 struct config_param *config = &sp->config; 6865 struct mac_info *mac_control = &sp->mac_control; 6866 struct net_device *dev = sp->dev; 6867 struct RxD_t *rxdp = NULL; 6868 struct sk_buff *skb = NULL; 6869 struct buffAdd *ba = NULL; 6870 u64 temp0_64 = 0, temp1_64 = 0, temp2_64 = 0; 6871 6872 /* Calculate the size based on ring mode */ 6873 size = dev->mtu + HEADER_ETHERNET_II_802_3_SIZE + 6874 HEADER_802_2_SIZE + HEADER_SNAP_SIZE; 6875 if (sp->rxd_mode == RXD_MODE_1) 6876 size += NET_IP_ALIGN; 6877 else if (sp->rxd_mode == RXD_MODE_3B) 6878 size = dev->mtu + ALIGN_SIZE + BUF0_LEN + 4; 6879 6880 for (i = 0; i < config->rx_ring_num; i++) { 6881 struct rx_ring_config *rx_cfg = &config->rx_cfg[i]; 6882 struct ring_info *ring = &mac_control->rings[i]; 6883 6884 blk_cnt = rx_cfg->num_rxd / (rxd_count[sp->rxd_mode] + 1); 6885 6886 for (j = 0; j < blk_cnt; j++) { 6887 for (k = 0; k < rxd_count[sp->rxd_mode]; k++) { 6888 rxdp = ring->rx_blocks[j].rxds[k].virt_addr; 6889 if (sp->rxd_mode == RXD_MODE_3B) 6890 ba = &ring->ba[j][k]; 6891 if (set_rxd_buffer_pointer(sp, rxdp, ba, &skb, 6892 &temp0_64, 6893 &temp1_64, 6894 &temp2_64, 6895 size) == -ENOMEM) { 6896 return 0; 6897 } 6898 6899 set_rxd_buffer_size(sp, rxdp, size); 6900 dma_wmb(); 6901 /* flip the Ownership bit to Hardware */ 6902 rxdp->Control_1 |= RXD_OWN_XENA; 6903 } 6904 } 6905 } 6906 return 0; 6907 6908 } 6909 6910 static int s2io_add_isr(struct s2io_nic *sp) 6911 { 6912 int ret = 0; 6913 struct net_device *dev = sp->dev; 6914 int err = 0; 6915 6916 if (sp->config.intr_type == MSI_X) 6917 ret = s2io_enable_msi_x(sp); 6918 if (ret) { 6919 DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name); 6920 sp->config.intr_type = INTA; 6921 } 6922 6923 /* 6924 * Store the values of the MSIX table in 6925 * the struct s2io_nic structure 6926 */ 6927 store_xmsi_data(sp); 6928 6929 /* After proper initialization of H/W, register ISR */ 6930 if (sp->config.intr_type == MSI_X) { 6931 int i, msix_rx_cnt = 0; 6932 6933 for (i = 0; i < sp->num_entries; i++) { 6934 if (sp->s2io_entries[i].in_use == MSIX_FLG) { 6935 if (sp->s2io_entries[i].type == 6936 MSIX_RING_TYPE) { 6937 snprintf(sp->desc[i], 6938 sizeof(sp->desc[i]), 6939 "%s:MSI-X-%d-RX", 6940 dev->name, i); 6941 err = request_irq(sp->entries[i].vector, 6942 s2io_msix_ring_handle, 6943 0, 6944 sp->desc[i], 6945 sp->s2io_entries[i].arg); 6946 } else if (sp->s2io_entries[i].type == 6947 MSIX_ALARM_TYPE) { 6948 snprintf(sp->desc[i], 6949 sizeof(sp->desc[i]), 6950 "%s:MSI-X-%d-TX", 6951 dev->name, i); 6952 err = request_irq(sp->entries[i].vector, 6953 s2io_msix_fifo_handle, 6954 0, 6955 sp->desc[i], 6956 sp->s2io_entries[i].arg); 6957 6958 } 6959 /* if either data or addr is zero print it. */ 6960 if (!(sp->msix_info[i].addr && 6961 sp->msix_info[i].data)) { 6962 DBG_PRINT(ERR_DBG, 6963 "%s @Addr:0x%llx Data:0x%llx\n", 6964 sp->desc[i], 6965 (unsigned long long) 6966 sp->msix_info[i].addr, 6967 (unsigned long long) 6968 ntohl(sp->msix_info[i].data)); 6969 } else 6970 msix_rx_cnt++; 6971 if (err) { 6972 remove_msix_isr(sp); 6973 6974 DBG_PRINT(ERR_DBG, 6975 "%s:MSI-X-%d registration " 6976 "failed\n", dev->name, i); 6977 6978 DBG_PRINT(ERR_DBG, 6979 "%s: Defaulting to INTA\n", 6980 dev->name); 6981 sp->config.intr_type = INTA; 6982 break; 6983 } 6984 sp->s2io_entries[i].in_use = 6985 MSIX_REGISTERED_SUCCESS; 6986 } 6987 } 6988 if (!err) { 6989 pr_info("MSI-X-RX %d entries enabled\n", --msix_rx_cnt); 6990 DBG_PRINT(INFO_DBG, 6991 "MSI-X-TX entries enabled through alarm vector\n"); 6992 } 6993 } 6994 if (sp->config.intr_type == INTA) { 6995 err = request_irq(sp->pdev->irq, s2io_isr, IRQF_SHARED, 6996 sp->name, dev); 6997 if (err) { 6998 DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n", 6999 dev->name); 7000 return -1; 7001 } 7002 } 7003 return 0; 7004 } 7005 7006 static void s2io_rem_isr(struct s2io_nic *sp) 7007 { 7008 if (sp->config.intr_type == MSI_X) 7009 remove_msix_isr(sp); 7010 else 7011 remove_inta_isr(sp); 7012 } 7013 7014 static void do_s2io_card_down(struct s2io_nic *sp, int do_io) 7015 { 7016 int cnt = 0; 7017 struct XENA_dev_config __iomem *bar0 = sp->bar0; 7018 register u64 val64 = 0; 7019 struct config_param *config; 7020 config = &sp->config; 7021 7022 if (!is_s2io_card_up(sp)) 7023 return; 7024 7025 del_timer_sync(&sp->alarm_timer); 7026 /* If s2io_set_link task is executing, wait till it completes. */ 7027 while (test_and_set_bit(__S2IO_STATE_LINK_TASK, &(sp->state))) 7028 msleep(50); 7029 clear_bit(__S2IO_STATE_CARD_UP, &sp->state); 7030 7031 /* Disable napi */ 7032 if (sp->config.napi) { 7033 int off = 0; 7034 if (config->intr_type == MSI_X) { 7035 for (; off < sp->config.rx_ring_num; off++) 7036 napi_disable(&sp->mac_control.rings[off].napi); 7037 } 7038 else 7039 napi_disable(&sp->napi); 7040 } 7041 7042 /* disable Tx and Rx traffic on the NIC */ 7043 if (do_io) 7044 stop_nic(sp); 7045 7046 s2io_rem_isr(sp); 7047 7048 /* stop the tx queue, indicate link down */ 7049 s2io_link(sp, LINK_DOWN); 7050 7051 /* Check if the device is Quiescent and then Reset the NIC */ 7052 while (do_io) { 7053 /* As per the HW requirement we need to replenish the 7054 * receive buffer to avoid the ring bump. Since there is 7055 * no intention of processing the Rx frame at this pointwe are 7056 * just setting the ownership bit of rxd in Each Rx 7057 * ring to HW and set the appropriate buffer size 7058 * based on the ring mode 7059 */ 7060 rxd_owner_bit_reset(sp); 7061 7062 val64 = readq(&bar0->adapter_status); 7063 if (verify_xena_quiescence(sp)) { 7064 if (verify_pcc_quiescent(sp, sp->device_enabled_once)) 7065 break; 7066 } 7067 7068 msleep(50); 7069 cnt++; 7070 if (cnt == 10) { 7071 DBG_PRINT(ERR_DBG, "Device not Quiescent - " 7072 "adapter status reads 0x%llx\n", 7073 (unsigned long long)val64); 7074 break; 7075 } 7076 } 7077 if (do_io) 7078 s2io_reset(sp); 7079 7080 /* Free all Tx buffers */ 7081 free_tx_buffers(sp); 7082 7083 /* Free all Rx buffers */ 7084 free_rx_buffers(sp); 7085 7086 clear_bit(__S2IO_STATE_LINK_TASK, &(sp->state)); 7087 } 7088 7089 static void s2io_card_down(struct s2io_nic *sp) 7090 { 7091 do_s2io_card_down(sp, 1); 7092 } 7093 7094 static int s2io_card_up(struct s2io_nic *sp) 7095 { 7096 int i, ret = 0; 7097 struct config_param *config; 7098 struct mac_info *mac_control; 7099 struct net_device *dev = sp->dev; 7100 u16 interruptible; 7101 7102 /* Initialize the H/W I/O registers */ 7103 ret = init_nic(sp); 7104 if (ret != 0) { 7105 DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n", 7106 dev->name); 7107 if (ret != -EIO) 7108 s2io_reset(sp); 7109 return ret; 7110 } 7111 7112 /* 7113 * Initializing the Rx buffers. For now we are considering only 1 7114 * Rx ring and initializing buffers into 30 Rx blocks 7115 */ 7116 config = &sp->config; 7117 mac_control = &sp->mac_control; 7118 7119 for (i = 0; i < config->rx_ring_num; i++) { 7120 struct ring_info *ring = &mac_control->rings[i]; 7121 7122 ring->mtu = dev->mtu; 7123 ring->lro = !!(dev->features & NETIF_F_LRO); 7124 ret = fill_rx_buffers(sp, ring, 1); 7125 if (ret) { 7126 DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n", 7127 dev->name); 7128 s2io_reset(sp); 7129 free_rx_buffers(sp); 7130 return -ENOMEM; 7131 } 7132 DBG_PRINT(INFO_DBG, "Buf in ring:%d is %d:\n", i, 7133 ring->rx_bufs_left); 7134 } 7135 7136 /* Initialise napi */ 7137 if (config->napi) { 7138 if (config->intr_type == MSI_X) { 7139 for (i = 0; i < sp->config.rx_ring_num; i++) 7140 napi_enable(&sp->mac_control.rings[i].napi); 7141 } else { 7142 napi_enable(&sp->napi); 7143 } 7144 } 7145 7146 /* Maintain the state prior to the open */ 7147 if (sp->promisc_flg) 7148 sp->promisc_flg = 0; 7149 if (sp->m_cast_flg) { 7150 sp->m_cast_flg = 0; 7151 sp->all_multi_pos = 0; 7152 } 7153 7154 /* Setting its receive mode */ 7155 s2io_set_multicast(dev); 7156 7157 if (dev->features & NETIF_F_LRO) { 7158 /* Initialize max aggregatable pkts per session based on MTU */ 7159 sp->lro_max_aggr_per_sess = ((1<<16) - 1) / dev->mtu; 7160 /* Check if we can use (if specified) user provided value */ 7161 if (lro_max_pkts < sp->lro_max_aggr_per_sess) 7162 sp->lro_max_aggr_per_sess = lro_max_pkts; 7163 } 7164 7165 /* Enable Rx Traffic and interrupts on the NIC */ 7166 if (start_nic(sp)) { 7167 DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name); 7168 s2io_reset(sp); 7169 free_rx_buffers(sp); 7170 return -ENODEV; 7171 } 7172 7173 /* Add interrupt service routine */ 7174 if (s2io_add_isr(sp) != 0) { 7175 if (sp->config.intr_type == MSI_X) 7176 s2io_rem_isr(sp); 7177 s2io_reset(sp); 7178 free_rx_buffers(sp); 7179 return -ENODEV; 7180 } 7181 7182 timer_setup(&sp->alarm_timer, s2io_alarm_handle, 0); 7183 mod_timer(&sp->alarm_timer, jiffies + HZ / 2); 7184 7185 set_bit(__S2IO_STATE_CARD_UP, &sp->state); 7186 7187 /* Enable select interrupts */ 7188 en_dis_err_alarms(sp, ENA_ALL_INTRS, ENABLE_INTRS); 7189 if (sp->config.intr_type != INTA) { 7190 interruptible = TX_TRAFFIC_INTR | TX_PIC_INTR; 7191 en_dis_able_nic_intrs(sp, interruptible, ENABLE_INTRS); 7192 } else { 7193 interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR; 7194 interruptible |= TX_PIC_INTR; 7195 en_dis_able_nic_intrs(sp, interruptible, ENABLE_INTRS); 7196 } 7197 7198 return 0; 7199 } 7200 7201 /** 7202 * s2io_restart_nic - Resets the NIC. 7203 * @data : long pointer to the device private structure 7204 * Description: 7205 * This function is scheduled to be run by the s2io_tx_watchdog 7206 * function after 0.5 secs to reset the NIC. The idea is to reduce 7207 * the run time of the watch dog routine which is run holding a 7208 * spin lock. 7209 */ 7210 7211 static void s2io_restart_nic(struct work_struct *work) 7212 { 7213 struct s2io_nic *sp = container_of(work, struct s2io_nic, rst_timer_task); 7214 struct net_device *dev = sp->dev; 7215 7216 rtnl_lock(); 7217 7218 if (!netif_running(dev)) 7219 goto out_unlock; 7220 7221 s2io_card_down(sp); 7222 if (s2io_card_up(sp)) { 7223 DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", dev->name); 7224 } 7225 s2io_wake_all_tx_queue(sp); 7226 DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n", dev->name); 7227 out_unlock: 7228 rtnl_unlock(); 7229 } 7230 7231 /** 7232 * s2io_tx_watchdog - Watchdog for transmit side. 7233 * @dev : Pointer to net device structure 7234 * Description: 7235 * This function is triggered if the Tx Queue is stopped 7236 * for a pre-defined amount of time when the Interface is still up. 7237 * If the Interface is jammed in such a situation, the hardware is 7238 * reset (by s2io_close) and restarted again (by s2io_open) to 7239 * overcome any problem that might have been caused in the hardware. 7240 * Return value: 7241 * void 7242 */ 7243 7244 static void s2io_tx_watchdog(struct net_device *dev) 7245 { 7246 struct s2io_nic *sp = netdev_priv(dev); 7247 struct swStat *swstats = &sp->mac_control.stats_info->sw_stat; 7248 7249 if (netif_carrier_ok(dev)) { 7250 swstats->watchdog_timer_cnt++; 7251 schedule_work(&sp->rst_timer_task); 7252 swstats->soft_reset_cnt++; 7253 } 7254 } 7255 7256 /** 7257 * rx_osm_handler - To perform some OS related operations on SKB. 7258 * @sp: private member of the device structure,pointer to s2io_nic structure. 7259 * @skb : the socket buffer pointer. 7260 * @len : length of the packet 7261 * @cksum : FCS checksum of the frame. 7262 * @ring_no : the ring from which this RxD was extracted. 7263 * Description: 7264 * This function is called by the Rx interrupt serivce routine to perform 7265 * some OS related operations on the SKB before passing it to the upper 7266 * layers. It mainly checks if the checksum is OK, if so adds it to the 7267 * SKBs cksum variable, increments the Rx packet count and passes the SKB 7268 * to the upper layer. If the checksum is wrong, it increments the Rx 7269 * packet error count, frees the SKB and returns error. 7270 * Return value: 7271 * SUCCESS on success and -1 on failure. 7272 */ 7273 static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp) 7274 { 7275 struct s2io_nic *sp = ring_data->nic; 7276 struct net_device *dev = ring_data->dev; 7277 struct sk_buff *skb = (struct sk_buff *) 7278 ((unsigned long)rxdp->Host_Control); 7279 int ring_no = ring_data->ring_no; 7280 u16 l3_csum, l4_csum; 7281 unsigned long long err = rxdp->Control_1 & RXD_T_CODE; 7282 struct lro *uninitialized_var(lro); 7283 u8 err_mask; 7284 struct swStat *swstats = &sp->mac_control.stats_info->sw_stat; 7285 7286 skb->dev = dev; 7287 7288 if (err) { 7289 /* Check for parity error */ 7290 if (err & 0x1) 7291 swstats->parity_err_cnt++; 7292 7293 err_mask = err >> 48; 7294 switch (err_mask) { 7295 case 1: 7296 swstats->rx_parity_err_cnt++; 7297 break; 7298 7299 case 2: 7300 swstats->rx_abort_cnt++; 7301 break; 7302 7303 case 3: 7304 swstats->rx_parity_abort_cnt++; 7305 break; 7306 7307 case 4: 7308 swstats->rx_rda_fail_cnt++; 7309 break; 7310 7311 case 5: 7312 swstats->rx_unkn_prot_cnt++; 7313 break; 7314 7315 case 6: 7316 swstats->rx_fcs_err_cnt++; 7317 break; 7318 7319 case 7: 7320 swstats->rx_buf_size_err_cnt++; 7321 break; 7322 7323 case 8: 7324 swstats->rx_rxd_corrupt_cnt++; 7325 break; 7326 7327 case 15: 7328 swstats->rx_unkn_err_cnt++; 7329 break; 7330 } 7331 /* 7332 * Drop the packet if bad transfer code. Exception being 7333 * 0x5, which could be due to unsupported IPv6 extension header. 7334 * In this case, we let stack handle the packet. 7335 * Note that in this case, since checksum will be incorrect, 7336 * stack will validate the same. 7337 */ 7338 if (err_mask != 0x5) { 7339 DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%x\n", 7340 dev->name, err_mask); 7341 dev->stats.rx_crc_errors++; 7342 swstats->mem_freed 7343 += skb->truesize; 7344 dev_kfree_skb(skb); 7345 ring_data->rx_bufs_left -= 1; 7346 rxdp->Host_Control = 0; 7347 return 0; 7348 } 7349 } 7350 7351 rxdp->Host_Control = 0; 7352 if (sp->rxd_mode == RXD_MODE_1) { 7353 int len = RXD_GET_BUFFER0_SIZE_1(rxdp->Control_2); 7354 7355 skb_put(skb, len); 7356 } else if (sp->rxd_mode == RXD_MODE_3B) { 7357 int get_block = ring_data->rx_curr_get_info.block_index; 7358 int get_off = ring_data->rx_curr_get_info.offset; 7359 int buf0_len = RXD_GET_BUFFER0_SIZE_3(rxdp->Control_2); 7360 int buf2_len = RXD_GET_BUFFER2_SIZE_3(rxdp->Control_2); 7361 unsigned char *buff = skb_push(skb, buf0_len); 7362 7363 struct buffAdd *ba = &ring_data->ba[get_block][get_off]; 7364 memcpy(buff, ba->ba_0, buf0_len); 7365 skb_put(skb, buf2_len); 7366 } 7367 7368 if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) && 7369 ((!ring_data->lro) || 7370 (!(rxdp->Control_1 & RXD_FRAME_IP_FRAG))) && 7371 (dev->features & NETIF_F_RXCSUM)) { 7372 l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1); 7373 l4_csum = RXD_GET_L4_CKSUM(rxdp->Control_1); 7374 if ((l3_csum == L3_CKSUM_OK) && (l4_csum == L4_CKSUM_OK)) { 7375 /* 7376 * NIC verifies if the Checksum of the received 7377 * frame is Ok or not and accordingly returns 7378 * a flag in the RxD. 7379 */ 7380 skb->ip_summed = CHECKSUM_UNNECESSARY; 7381 if (ring_data->lro) { 7382 u32 tcp_len = 0; 7383 u8 *tcp; 7384 int ret = 0; 7385 7386 ret = s2io_club_tcp_session(ring_data, 7387 skb->data, &tcp, 7388 &tcp_len, &lro, 7389 rxdp, sp); 7390 switch (ret) { 7391 case 3: /* Begin anew */ 7392 lro->parent = skb; 7393 goto aggregate; 7394 case 1: /* Aggregate */ 7395 lro_append_pkt(sp, lro, skb, tcp_len); 7396 goto aggregate; 7397 case 4: /* Flush session */ 7398 lro_append_pkt(sp, lro, skb, tcp_len); 7399 queue_rx_frame(lro->parent, 7400 lro->vlan_tag); 7401 clear_lro_session(lro); 7402 swstats->flush_max_pkts++; 7403 goto aggregate; 7404 case 2: /* Flush both */ 7405 lro->parent->data_len = lro->frags_len; 7406 swstats->sending_both++; 7407 queue_rx_frame(lro->parent, 7408 lro->vlan_tag); 7409 clear_lro_session(lro); 7410 goto send_up; 7411 case 0: /* sessions exceeded */ 7412 case -1: /* non-TCP or not L2 aggregatable */ 7413 case 5: /* 7414 * First pkt in session not 7415 * L3/L4 aggregatable 7416 */ 7417 break; 7418 default: 7419 DBG_PRINT(ERR_DBG, 7420 "%s: Samadhana!!\n", 7421 __func__); 7422 BUG(); 7423 } 7424 } 7425 } else { 7426 /* 7427 * Packet with erroneous checksum, let the 7428 * upper layers deal with it. 7429 */ 7430 skb_checksum_none_assert(skb); 7431 } 7432 } else 7433 skb_checksum_none_assert(skb); 7434 7435 swstats->mem_freed += skb->truesize; 7436 send_up: 7437 skb_record_rx_queue(skb, ring_no); 7438 queue_rx_frame(skb, RXD_GET_VLAN_TAG(rxdp->Control_2)); 7439 aggregate: 7440 sp->mac_control.rings[ring_no].rx_bufs_left -= 1; 7441 return SUCCESS; 7442 } 7443 7444 /** 7445 * s2io_link - stops/starts the Tx queue. 7446 * @sp : private member of the device structure, which is a pointer to the 7447 * s2io_nic structure. 7448 * @link : inidicates whether link is UP/DOWN. 7449 * Description: 7450 * This function stops/starts the Tx queue depending on whether the link 7451 * status of the NIC is is down or up. This is called by the Alarm 7452 * interrupt handler whenever a link change interrupt comes up. 7453 * Return value: 7454 * void. 7455 */ 7456 7457 static void s2io_link(struct s2io_nic *sp, int link) 7458 { 7459 struct net_device *dev = sp->dev; 7460 struct swStat *swstats = &sp->mac_control.stats_info->sw_stat; 7461 7462 if (link != sp->last_link_state) { 7463 init_tti(sp, link); 7464 if (link == LINK_DOWN) { 7465 DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name); 7466 s2io_stop_all_tx_queue(sp); 7467 netif_carrier_off(dev); 7468 if (swstats->link_up_cnt) 7469 swstats->link_up_time = 7470 jiffies - sp->start_time; 7471 swstats->link_down_cnt++; 7472 } else { 7473 DBG_PRINT(ERR_DBG, "%s: Link Up\n", dev->name); 7474 if (swstats->link_down_cnt) 7475 swstats->link_down_time = 7476 jiffies - sp->start_time; 7477 swstats->link_up_cnt++; 7478 netif_carrier_on(dev); 7479 s2io_wake_all_tx_queue(sp); 7480 } 7481 } 7482 sp->last_link_state = link; 7483 sp->start_time = jiffies; 7484 } 7485 7486 /** 7487 * s2io_init_pci -Initialization of PCI and PCI-X configuration registers . 7488 * @sp : private member of the device structure, which is a pointer to the 7489 * s2io_nic structure. 7490 * Description: 7491 * This function initializes a few of the PCI and PCI-X configuration registers 7492 * with recommended values. 7493 * Return value: 7494 * void 7495 */ 7496 7497 static void s2io_init_pci(struct s2io_nic *sp) 7498 { 7499 u16 pci_cmd = 0, pcix_cmd = 0; 7500 7501 /* Enable Data Parity Error Recovery in PCI-X command register. */ 7502 pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, 7503 &(pcix_cmd)); 7504 pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, 7505 (pcix_cmd | 1)); 7506 pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, 7507 &(pcix_cmd)); 7508 7509 /* Set the PErr Response bit in PCI command register. */ 7510 pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd); 7511 pci_write_config_word(sp->pdev, PCI_COMMAND, 7512 (pci_cmd | PCI_COMMAND_PARITY)); 7513 pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd); 7514 } 7515 7516 static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type, 7517 u8 *dev_multiq) 7518 { 7519 int i; 7520 7521 if ((tx_fifo_num > MAX_TX_FIFOS) || (tx_fifo_num < 1)) { 7522 DBG_PRINT(ERR_DBG, "Requested number of tx fifos " 7523 "(%d) not supported\n", tx_fifo_num); 7524 7525 if (tx_fifo_num < 1) 7526 tx_fifo_num = 1; 7527 else 7528 tx_fifo_num = MAX_TX_FIFOS; 7529 7530 DBG_PRINT(ERR_DBG, "Default to %d tx fifos\n", tx_fifo_num); 7531 } 7532 7533 if (multiq) 7534 *dev_multiq = multiq; 7535 7536 if (tx_steering_type && (1 == tx_fifo_num)) { 7537 if (tx_steering_type != TX_DEFAULT_STEERING) 7538 DBG_PRINT(ERR_DBG, 7539 "Tx steering is not supported with " 7540 "one fifo. Disabling Tx steering.\n"); 7541 tx_steering_type = NO_STEERING; 7542 } 7543 7544 if ((tx_steering_type < NO_STEERING) || 7545 (tx_steering_type > TX_DEFAULT_STEERING)) { 7546 DBG_PRINT(ERR_DBG, 7547 "Requested transmit steering not supported\n"); 7548 DBG_PRINT(ERR_DBG, "Disabling transmit steering\n"); 7549 tx_steering_type = NO_STEERING; 7550 } 7551 7552 if (rx_ring_num > MAX_RX_RINGS) { 7553 DBG_PRINT(ERR_DBG, 7554 "Requested number of rx rings not supported\n"); 7555 DBG_PRINT(ERR_DBG, "Default to %d rx rings\n", 7556 MAX_RX_RINGS); 7557 rx_ring_num = MAX_RX_RINGS; 7558 } 7559 7560 if ((*dev_intr_type != INTA) && (*dev_intr_type != MSI_X)) { 7561 DBG_PRINT(ERR_DBG, "Wrong intr_type requested. " 7562 "Defaulting to INTA\n"); 7563 *dev_intr_type = INTA; 7564 } 7565 7566 if ((*dev_intr_type == MSI_X) && 7567 ((pdev->device != PCI_DEVICE_ID_HERC_WIN) && 7568 (pdev->device != PCI_DEVICE_ID_HERC_UNI))) { 7569 DBG_PRINT(ERR_DBG, "Xframe I does not support MSI_X. " 7570 "Defaulting to INTA\n"); 7571 *dev_intr_type = INTA; 7572 } 7573 7574 if ((rx_ring_mode != 1) && (rx_ring_mode != 2)) { 7575 DBG_PRINT(ERR_DBG, "Requested ring mode not supported\n"); 7576 DBG_PRINT(ERR_DBG, "Defaulting to 1-buffer mode\n"); 7577 rx_ring_mode = 1; 7578 } 7579 7580 for (i = 0; i < MAX_RX_RINGS; i++) 7581 if (rx_ring_sz[i] > MAX_RX_BLOCKS_PER_RING) { 7582 DBG_PRINT(ERR_DBG, "Requested rx ring size not " 7583 "supported\nDefaulting to %d\n", 7584 MAX_RX_BLOCKS_PER_RING); 7585 rx_ring_sz[i] = MAX_RX_BLOCKS_PER_RING; 7586 } 7587 7588 return SUCCESS; 7589 } 7590 7591 /** 7592 * rts_ds_steer - Receive traffic steering based on IPv4 or IPv6 TOS 7593 * or Traffic class respectively. 7594 * @nic: device private variable 7595 * Description: The function configures the receive steering to 7596 * desired receive ring. 7597 * Return Value: SUCCESS on success and 7598 * '-1' on failure (endian settings incorrect). 7599 */ 7600 static int rts_ds_steer(struct s2io_nic *nic, u8 ds_codepoint, u8 ring) 7601 { 7602 struct XENA_dev_config __iomem *bar0 = nic->bar0; 7603 register u64 val64 = 0; 7604 7605 if (ds_codepoint > 63) 7606 return FAILURE; 7607 7608 val64 = RTS_DS_MEM_DATA(ring); 7609 writeq(val64, &bar0->rts_ds_mem_data); 7610 7611 val64 = RTS_DS_MEM_CTRL_WE | 7612 RTS_DS_MEM_CTRL_STROBE_NEW_CMD | 7613 RTS_DS_MEM_CTRL_OFFSET(ds_codepoint); 7614 7615 writeq(val64, &bar0->rts_ds_mem_ctrl); 7616 7617 return wait_for_cmd_complete(&bar0->rts_ds_mem_ctrl, 7618 RTS_DS_MEM_CTRL_STROBE_CMD_BEING_EXECUTED, 7619 S2IO_BIT_RESET); 7620 } 7621 7622 static const struct net_device_ops s2io_netdev_ops = { 7623 .ndo_open = s2io_open, 7624 .ndo_stop = s2io_close, 7625 .ndo_get_stats = s2io_get_stats, 7626 .ndo_start_xmit = s2io_xmit, 7627 .ndo_validate_addr = eth_validate_addr, 7628 .ndo_set_rx_mode = s2io_set_multicast, 7629 .ndo_do_ioctl = s2io_ioctl, 7630 .ndo_set_mac_address = s2io_set_mac_addr, 7631 .ndo_change_mtu = s2io_change_mtu, 7632 .ndo_set_features = s2io_set_features, 7633 .ndo_tx_timeout = s2io_tx_watchdog, 7634 #ifdef CONFIG_NET_POLL_CONTROLLER 7635 .ndo_poll_controller = s2io_netpoll, 7636 #endif 7637 }; 7638 7639 /** 7640 * s2io_init_nic - Initialization of the adapter . 7641 * @pdev : structure containing the PCI related information of the device. 7642 * @pre: List of PCI devices supported by the driver listed in s2io_tbl. 7643 * Description: 7644 * The function initializes an adapter identified by the pci_dec structure. 7645 * All OS related initialization including memory and device structure and 7646 * initlaization of the device private variable is done. Also the swapper 7647 * control register is initialized to enable read and write into the I/O 7648 * registers of the device. 7649 * Return value: 7650 * returns 0 on success and negative on failure. 7651 */ 7652 7653 static int 7654 s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) 7655 { 7656 struct s2io_nic *sp; 7657 struct net_device *dev; 7658 int i, j, ret; 7659 int dma_flag = false; 7660 u32 mac_up, mac_down; 7661 u64 val64 = 0, tmp64 = 0; 7662 struct XENA_dev_config __iomem *bar0 = NULL; 7663 u16 subid; 7664 struct config_param *config; 7665 struct mac_info *mac_control; 7666 int mode; 7667 u8 dev_intr_type = intr_type; 7668 u8 dev_multiq = 0; 7669 7670 ret = s2io_verify_parm(pdev, &dev_intr_type, &dev_multiq); 7671 if (ret) 7672 return ret; 7673 7674 ret = pci_enable_device(pdev); 7675 if (ret) { 7676 DBG_PRINT(ERR_DBG, 7677 "%s: pci_enable_device failed\n", __func__); 7678 return ret; 7679 } 7680 7681 if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { 7682 DBG_PRINT(INIT_DBG, "%s: Using 64bit DMA\n", __func__); 7683 dma_flag = true; 7684 if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) { 7685 DBG_PRINT(ERR_DBG, 7686 "Unable to obtain 64bit DMA " 7687 "for consistent allocations\n"); 7688 pci_disable_device(pdev); 7689 return -ENOMEM; 7690 } 7691 } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { 7692 DBG_PRINT(INIT_DBG, "%s: Using 32bit DMA\n", __func__); 7693 } else { 7694 pci_disable_device(pdev); 7695 return -ENOMEM; 7696 } 7697 ret = pci_request_regions(pdev, s2io_driver_name); 7698 if (ret) { 7699 DBG_PRINT(ERR_DBG, "%s: Request Regions failed - %x\n", 7700 __func__, ret); 7701 pci_disable_device(pdev); 7702 return -ENODEV; 7703 } 7704 if (dev_multiq) 7705 dev = alloc_etherdev_mq(sizeof(struct s2io_nic), tx_fifo_num); 7706 else 7707 dev = alloc_etherdev(sizeof(struct s2io_nic)); 7708 if (dev == NULL) { 7709 pci_disable_device(pdev); 7710 pci_release_regions(pdev); 7711 return -ENODEV; 7712 } 7713 7714 pci_set_master(pdev); 7715 pci_set_drvdata(pdev, dev); 7716 SET_NETDEV_DEV(dev, &pdev->dev); 7717 7718 /* Private member variable initialized to s2io NIC structure */ 7719 sp = netdev_priv(dev); 7720 sp->dev = dev; 7721 sp->pdev = pdev; 7722 sp->high_dma_flag = dma_flag; 7723 sp->device_enabled_once = false; 7724 if (rx_ring_mode == 1) 7725 sp->rxd_mode = RXD_MODE_1; 7726 if (rx_ring_mode == 2) 7727 sp->rxd_mode = RXD_MODE_3B; 7728 7729 sp->config.intr_type = dev_intr_type; 7730 7731 if ((pdev->device == PCI_DEVICE_ID_HERC_WIN) || 7732 (pdev->device == PCI_DEVICE_ID_HERC_UNI)) 7733 sp->device_type = XFRAME_II_DEVICE; 7734 else 7735 sp->device_type = XFRAME_I_DEVICE; 7736 7737 7738 /* Initialize some PCI/PCI-X fields of the NIC. */ 7739 s2io_init_pci(sp); 7740 7741 /* 7742 * Setting the device configuration parameters. 7743 * Most of these parameters can be specified by the user during 7744 * module insertion as they are module loadable parameters. If 7745 * these parameters are not not specified during load time, they 7746 * are initialized with default values. 7747 */ 7748 config = &sp->config; 7749 mac_control = &sp->mac_control; 7750 7751 config->napi = napi; 7752 config->tx_steering_type = tx_steering_type; 7753 7754 /* Tx side parameters. */ 7755 if (config->tx_steering_type == TX_PRIORITY_STEERING) 7756 config->tx_fifo_num = MAX_TX_FIFOS; 7757 else 7758 config->tx_fifo_num = tx_fifo_num; 7759 7760 /* Initialize the fifos used for tx steering */ 7761 if (config->tx_fifo_num < 5) { 7762 if (config->tx_fifo_num == 1) 7763 sp->total_tcp_fifos = 1; 7764 else 7765 sp->total_tcp_fifos = config->tx_fifo_num - 1; 7766 sp->udp_fifo_idx = config->tx_fifo_num - 1; 7767 sp->total_udp_fifos = 1; 7768 sp->other_fifo_idx = sp->total_tcp_fifos - 1; 7769 } else { 7770 sp->total_tcp_fifos = (tx_fifo_num - FIFO_UDP_MAX_NUM - 7771 FIFO_OTHER_MAX_NUM); 7772 sp->udp_fifo_idx = sp->total_tcp_fifos; 7773 sp->total_udp_fifos = FIFO_UDP_MAX_NUM; 7774 sp->other_fifo_idx = sp->udp_fifo_idx + FIFO_UDP_MAX_NUM; 7775 } 7776 7777 config->multiq = dev_multiq; 7778 for (i = 0; i < config->tx_fifo_num; i++) { 7779 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i]; 7780 7781 tx_cfg->fifo_len = tx_fifo_len[i]; 7782 tx_cfg->fifo_priority = i; 7783 } 7784 7785 /* mapping the QoS priority to the configured fifos */ 7786 for (i = 0; i < MAX_TX_FIFOS; i++) 7787 config->fifo_mapping[i] = fifo_map[config->tx_fifo_num - 1][i]; 7788 7789 /* map the hashing selector table to the configured fifos */ 7790 for (i = 0; i < config->tx_fifo_num; i++) 7791 sp->fifo_selector[i] = fifo_selector[i]; 7792 7793 7794 config->tx_intr_type = TXD_INT_TYPE_UTILZ; 7795 for (i = 0; i < config->tx_fifo_num; i++) { 7796 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i]; 7797 7798 tx_cfg->f_no_snoop = (NO_SNOOP_TXD | NO_SNOOP_TXD_BUFFER); 7799 if (tx_cfg->fifo_len < 65) { 7800 config->tx_intr_type = TXD_INT_TYPE_PER_LIST; 7801 break; 7802 } 7803 } 7804 /* + 2 because one Txd for skb->data and one Txd for UFO */ 7805 config->max_txds = MAX_SKB_FRAGS + 2; 7806 7807 /* Rx side parameters. */ 7808 config->rx_ring_num = rx_ring_num; 7809 for (i = 0; i < config->rx_ring_num; i++) { 7810 struct rx_ring_config *rx_cfg = &config->rx_cfg[i]; 7811 struct ring_info *ring = &mac_control->rings[i]; 7812 7813 rx_cfg->num_rxd = rx_ring_sz[i] * (rxd_count[sp->rxd_mode] + 1); 7814 rx_cfg->ring_priority = i; 7815 ring->rx_bufs_left = 0; 7816 ring->rxd_mode = sp->rxd_mode; 7817 ring->rxd_count = rxd_count[sp->rxd_mode]; 7818 ring->pdev = sp->pdev; 7819 ring->dev = sp->dev; 7820 } 7821 7822 for (i = 0; i < rx_ring_num; i++) { 7823 struct rx_ring_config *rx_cfg = &config->rx_cfg[i]; 7824 7825 rx_cfg->ring_org = RING_ORG_BUFF1; 7826 rx_cfg->f_no_snoop = (NO_SNOOP_RXD | NO_SNOOP_RXD_BUFFER); 7827 } 7828 7829 /* Setting Mac Control parameters */ 7830 mac_control->rmac_pause_time = rmac_pause_time; 7831 mac_control->mc_pause_threshold_q0q3 = mc_pause_threshold_q0q3; 7832 mac_control->mc_pause_threshold_q4q7 = mc_pause_threshold_q4q7; 7833 7834 7835 /* initialize the shared memory used by the NIC and the host */ 7836 if (init_shared_mem(sp)) { 7837 DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", dev->name); 7838 ret = -ENOMEM; 7839 goto mem_alloc_failed; 7840 } 7841 7842 sp->bar0 = pci_ioremap_bar(pdev, 0); 7843 if (!sp->bar0) { 7844 DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem1\n", 7845 dev->name); 7846 ret = -ENOMEM; 7847 goto bar0_remap_failed; 7848 } 7849 7850 sp->bar1 = pci_ioremap_bar(pdev, 2); 7851 if (!sp->bar1) { 7852 DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem2\n", 7853 dev->name); 7854 ret = -ENOMEM; 7855 goto bar1_remap_failed; 7856 } 7857 7858 /* Initializing the BAR1 address as the start of the FIFO pointer. */ 7859 for (j = 0; j < MAX_TX_FIFOS; j++) { 7860 mac_control->tx_FIFO_start[j] = sp->bar1 + (j * 0x00020000); 7861 } 7862 7863 /* Driver entry points */ 7864 dev->netdev_ops = &s2io_netdev_ops; 7865 dev->ethtool_ops = &netdev_ethtool_ops; 7866 dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | 7867 NETIF_F_TSO | NETIF_F_TSO6 | 7868 NETIF_F_RXCSUM | NETIF_F_LRO; 7869 dev->features |= dev->hw_features | 7870 NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX; 7871 if (sp->high_dma_flag == true) 7872 dev->features |= NETIF_F_HIGHDMA; 7873 dev->watchdog_timeo = WATCH_DOG_TIMEOUT; 7874 INIT_WORK(&sp->rst_timer_task, s2io_restart_nic); 7875 INIT_WORK(&sp->set_link_task, s2io_set_link); 7876 7877 pci_save_state(sp->pdev); 7878 7879 /* Setting swapper control on the NIC, for proper reset operation */ 7880 if (s2io_set_swapper(sp)) { 7881 DBG_PRINT(ERR_DBG, "%s: swapper settings are wrong\n", 7882 dev->name); 7883 ret = -EAGAIN; 7884 goto set_swap_failed; 7885 } 7886 7887 /* Verify if the Herc works on the slot its placed into */ 7888 if (sp->device_type & XFRAME_II_DEVICE) { 7889 mode = s2io_verify_pci_mode(sp); 7890 if (mode < 0) { 7891 DBG_PRINT(ERR_DBG, "%s: Unsupported PCI bus mode\n", 7892 __func__); 7893 ret = -EBADSLT; 7894 goto set_swap_failed; 7895 } 7896 } 7897 7898 if (sp->config.intr_type == MSI_X) { 7899 sp->num_entries = config->rx_ring_num + 1; 7900 ret = s2io_enable_msi_x(sp); 7901 7902 if (!ret) { 7903 ret = s2io_test_msi(sp); 7904 /* rollback MSI-X, will re-enable during add_isr() */ 7905 remove_msix_isr(sp); 7906 } 7907 if (ret) { 7908 7909 DBG_PRINT(ERR_DBG, 7910 "MSI-X requested but failed to enable\n"); 7911 sp->config.intr_type = INTA; 7912 } 7913 } 7914 7915 if (config->intr_type == MSI_X) { 7916 for (i = 0; i < config->rx_ring_num ; i++) { 7917 struct ring_info *ring = &mac_control->rings[i]; 7918 7919 netif_napi_add(dev, &ring->napi, s2io_poll_msix, 64); 7920 } 7921 } else { 7922 netif_napi_add(dev, &sp->napi, s2io_poll_inta, 64); 7923 } 7924 7925 /* Not needed for Herc */ 7926 if (sp->device_type & XFRAME_I_DEVICE) { 7927 /* 7928 * Fix for all "FFs" MAC address problems observed on 7929 * Alpha platforms 7930 */ 7931 fix_mac_address(sp); 7932 s2io_reset(sp); 7933 } 7934 7935 /* 7936 * MAC address initialization. 7937 * For now only one mac address will be read and used. 7938 */ 7939 bar0 = sp->bar0; 7940 val64 = RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD | 7941 RMAC_ADDR_CMD_MEM_OFFSET(0 + S2IO_MAC_ADDR_START_OFFSET); 7942 writeq(val64, &bar0->rmac_addr_cmd_mem); 7943 wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem, 7944 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING, 7945 S2IO_BIT_RESET); 7946 tmp64 = readq(&bar0->rmac_addr_data0_mem); 7947 mac_down = (u32)tmp64; 7948 mac_up = (u32) (tmp64 >> 32); 7949 7950 sp->def_mac_addr[0].mac_addr[3] = (u8) (mac_up); 7951 sp->def_mac_addr[0].mac_addr[2] = (u8) (mac_up >> 8); 7952 sp->def_mac_addr[0].mac_addr[1] = (u8) (mac_up >> 16); 7953 sp->def_mac_addr[0].mac_addr[0] = (u8) (mac_up >> 24); 7954 sp->def_mac_addr[0].mac_addr[5] = (u8) (mac_down >> 16); 7955 sp->def_mac_addr[0].mac_addr[4] = (u8) (mac_down >> 24); 7956 7957 /* Set the factory defined MAC address initially */ 7958 dev->addr_len = ETH_ALEN; 7959 memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN); 7960 7961 /* initialize number of multicast & unicast MAC entries variables */ 7962 if (sp->device_type == XFRAME_I_DEVICE) { 7963 config->max_mc_addr = S2IO_XENA_MAX_MC_ADDRESSES; 7964 config->max_mac_addr = S2IO_XENA_MAX_MAC_ADDRESSES; 7965 config->mc_start_offset = S2IO_XENA_MC_ADDR_START_OFFSET; 7966 } else if (sp->device_type == XFRAME_II_DEVICE) { 7967 config->max_mc_addr = S2IO_HERC_MAX_MC_ADDRESSES; 7968 config->max_mac_addr = S2IO_HERC_MAX_MAC_ADDRESSES; 7969 config->mc_start_offset = S2IO_HERC_MC_ADDR_START_OFFSET; 7970 } 7971 7972 /* MTU range: 46 - 9600 */ 7973 dev->min_mtu = MIN_MTU; 7974 dev->max_mtu = S2IO_JUMBO_SIZE; 7975 7976 /* store mac addresses from CAM to s2io_nic structure */ 7977 do_s2io_store_unicast_mc(sp); 7978 7979 /* Configure MSIX vector for number of rings configured plus one */ 7980 if ((sp->device_type == XFRAME_II_DEVICE) && 7981 (config->intr_type == MSI_X)) 7982 sp->num_entries = config->rx_ring_num + 1; 7983 7984 /* Store the values of the MSIX table in the s2io_nic structure */ 7985 store_xmsi_data(sp); 7986 /* reset Nic and bring it to known state */ 7987 s2io_reset(sp); 7988 7989 /* 7990 * Initialize link state flags 7991 * and the card state parameter 7992 */ 7993 sp->state = 0; 7994 7995 /* Initialize spinlocks */ 7996 for (i = 0; i < sp->config.tx_fifo_num; i++) { 7997 struct fifo_info *fifo = &mac_control->fifos[i]; 7998 7999 spin_lock_init(&fifo->tx_lock); 8000 } 8001 8002 /* 8003 * SXE-002: Configure link and activity LED to init state 8004 * on driver load. 8005 */ 8006 subid = sp->pdev->subsystem_device; 8007 if ((subid & 0xFF) >= 0x07) { 8008 val64 = readq(&bar0->gpio_control); 8009 val64 |= 0x0000800000000000ULL; 8010 writeq(val64, &bar0->gpio_control); 8011 val64 = 0x0411040400000000ULL; 8012 writeq(val64, (void __iomem *)bar0 + 0x2700); 8013 val64 = readq(&bar0->gpio_control); 8014 } 8015 8016 sp->rx_csum = 1; /* Rx chksum verify enabled by default */ 8017 8018 if (register_netdev(dev)) { 8019 DBG_PRINT(ERR_DBG, "Device registration failed\n"); 8020 ret = -ENODEV; 8021 goto register_failed; 8022 } 8023 s2io_vpd_read(sp); 8024 DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2010 Exar Corp.\n"); 8025 DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n", dev->name, 8026 sp->product_name, pdev->revision); 8027 DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name, 8028 s2io_driver_version); 8029 DBG_PRINT(ERR_DBG, "%s: MAC Address: %pM\n", dev->name, dev->dev_addr); 8030 DBG_PRINT(ERR_DBG, "Serial number: %s\n", sp->serial_num); 8031 if (sp->device_type & XFRAME_II_DEVICE) { 8032 mode = s2io_print_pci_mode(sp); 8033 if (mode < 0) { 8034 ret = -EBADSLT; 8035 unregister_netdev(dev); 8036 goto set_swap_failed; 8037 } 8038 } 8039 switch (sp->rxd_mode) { 8040 case RXD_MODE_1: 8041 DBG_PRINT(ERR_DBG, "%s: 1-Buffer receive mode enabled\n", 8042 dev->name); 8043 break; 8044 case RXD_MODE_3B: 8045 DBG_PRINT(ERR_DBG, "%s: 2-Buffer receive mode enabled\n", 8046 dev->name); 8047 break; 8048 } 8049 8050 switch (sp->config.napi) { 8051 case 0: 8052 DBG_PRINT(ERR_DBG, "%s: NAPI disabled\n", dev->name); 8053 break; 8054 case 1: 8055 DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name); 8056 break; 8057 } 8058 8059 DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name, 8060 sp->config.tx_fifo_num); 8061 8062 DBG_PRINT(ERR_DBG, "%s: Using %d Rx ring(s)\n", dev->name, 8063 sp->config.rx_ring_num); 8064 8065 switch (sp->config.intr_type) { 8066 case INTA: 8067 DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name); 8068 break; 8069 case MSI_X: 8070 DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI-X\n", dev->name); 8071 break; 8072 } 8073 if (sp->config.multiq) { 8074 for (i = 0; i < sp->config.tx_fifo_num; i++) { 8075 struct fifo_info *fifo = &mac_control->fifos[i]; 8076 8077 fifo->multiq = config->multiq; 8078 } 8079 DBG_PRINT(ERR_DBG, "%s: Multiqueue support enabled\n", 8080 dev->name); 8081 } else 8082 DBG_PRINT(ERR_DBG, "%s: Multiqueue support disabled\n", 8083 dev->name); 8084 8085 switch (sp->config.tx_steering_type) { 8086 case NO_STEERING: 8087 DBG_PRINT(ERR_DBG, "%s: No steering enabled for transmit\n", 8088 dev->name); 8089 break; 8090 case TX_PRIORITY_STEERING: 8091 DBG_PRINT(ERR_DBG, 8092 "%s: Priority steering enabled for transmit\n", 8093 dev->name); 8094 break; 8095 case TX_DEFAULT_STEERING: 8096 DBG_PRINT(ERR_DBG, 8097 "%s: Default steering enabled for transmit\n", 8098 dev->name); 8099 } 8100 8101 DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n", 8102 dev->name); 8103 /* Initialize device name */ 8104 snprintf(sp->name, sizeof(sp->name), "%s Neterion %s", dev->name, 8105 sp->product_name); 8106 8107 if (vlan_tag_strip) 8108 sp->vlan_strip_flag = 1; 8109 else 8110 sp->vlan_strip_flag = 0; 8111 8112 /* 8113 * Make Link state as off at this point, when the Link change 8114 * interrupt comes the state will be automatically changed to 8115 * the right state. 8116 */ 8117 netif_carrier_off(dev); 8118 8119 return 0; 8120 8121 register_failed: 8122 set_swap_failed: 8123 iounmap(sp->bar1); 8124 bar1_remap_failed: 8125 iounmap(sp->bar0); 8126 bar0_remap_failed: 8127 mem_alloc_failed: 8128 free_shared_mem(sp); 8129 pci_disable_device(pdev); 8130 pci_release_regions(pdev); 8131 free_netdev(dev); 8132 8133 return ret; 8134 } 8135 8136 /** 8137 * s2io_rem_nic - Free the PCI device 8138 * @pdev: structure containing the PCI related information of the device. 8139 * Description: This function is called by the Pci subsystem to release a 8140 * PCI device and free up all resource held up by the device. This could 8141 * be in response to a Hot plug event or when the driver is to be removed 8142 * from memory. 8143 */ 8144 8145 static void s2io_rem_nic(struct pci_dev *pdev) 8146 { 8147 struct net_device *dev = pci_get_drvdata(pdev); 8148 struct s2io_nic *sp; 8149 8150 if (dev == NULL) { 8151 DBG_PRINT(ERR_DBG, "Driver Data is NULL!!\n"); 8152 return; 8153 } 8154 8155 sp = netdev_priv(dev); 8156 8157 cancel_work_sync(&sp->rst_timer_task); 8158 cancel_work_sync(&sp->set_link_task); 8159 8160 unregister_netdev(dev); 8161 8162 free_shared_mem(sp); 8163 iounmap(sp->bar0); 8164 iounmap(sp->bar1); 8165 pci_release_regions(pdev); 8166 free_netdev(dev); 8167 pci_disable_device(pdev); 8168 } 8169 8170 module_pci_driver(s2io_driver); 8171 8172 static int check_L2_lro_capable(u8 *buffer, struct iphdr **ip, 8173 struct tcphdr **tcp, struct RxD_t *rxdp, 8174 struct s2io_nic *sp) 8175 { 8176 int ip_off; 8177 u8 l2_type = (u8)((rxdp->Control_1 >> 37) & 0x7), ip_len; 8178 8179 if (!(rxdp->Control_1 & RXD_FRAME_PROTO_TCP)) { 8180 DBG_PRINT(INIT_DBG, 8181 "%s: Non-TCP frames not supported for LRO\n", 8182 __func__); 8183 return -1; 8184 } 8185 8186 /* Checking for DIX type or DIX type with VLAN */ 8187 if ((l2_type == 0) || (l2_type == 4)) { 8188 ip_off = HEADER_ETHERNET_II_802_3_SIZE; 8189 /* 8190 * If vlan stripping is disabled and the frame is VLAN tagged, 8191 * shift the offset by the VLAN header size bytes. 8192 */ 8193 if ((!sp->vlan_strip_flag) && 8194 (rxdp->Control_1 & RXD_FRAME_VLAN_TAG)) 8195 ip_off += HEADER_VLAN_SIZE; 8196 } else { 8197 /* LLC, SNAP etc are considered non-mergeable */ 8198 return -1; 8199 } 8200 8201 *ip = (struct iphdr *)(buffer + ip_off); 8202 ip_len = (u8)((*ip)->ihl); 8203 ip_len <<= 2; 8204 *tcp = (struct tcphdr *)((unsigned long)*ip + ip_len); 8205 8206 return 0; 8207 } 8208 8209 static int check_for_socket_match(struct lro *lro, struct iphdr *ip, 8210 struct tcphdr *tcp) 8211 { 8212 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__); 8213 if ((lro->iph->saddr != ip->saddr) || 8214 (lro->iph->daddr != ip->daddr) || 8215 (lro->tcph->source != tcp->source) || 8216 (lro->tcph->dest != tcp->dest)) 8217 return -1; 8218 return 0; 8219 } 8220 8221 static inline int get_l4_pyld_length(struct iphdr *ip, struct tcphdr *tcp) 8222 { 8223 return ntohs(ip->tot_len) - (ip->ihl << 2) - (tcp->doff << 2); 8224 } 8225 8226 static void initiate_new_session(struct lro *lro, u8 *l2h, 8227 struct iphdr *ip, struct tcphdr *tcp, 8228 u32 tcp_pyld_len, u16 vlan_tag) 8229 { 8230 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__); 8231 lro->l2h = l2h; 8232 lro->iph = ip; 8233 lro->tcph = tcp; 8234 lro->tcp_next_seq = tcp_pyld_len + ntohl(tcp->seq); 8235 lro->tcp_ack = tcp->ack_seq; 8236 lro->sg_num = 1; 8237 lro->total_len = ntohs(ip->tot_len); 8238 lro->frags_len = 0; 8239 lro->vlan_tag = vlan_tag; 8240 /* 8241 * Check if we saw TCP timestamp. 8242 * Other consistency checks have already been done. 8243 */ 8244 if (tcp->doff == 8) { 8245 __be32 *ptr; 8246 ptr = (__be32 *)(tcp+1); 8247 lro->saw_ts = 1; 8248 lro->cur_tsval = ntohl(*(ptr+1)); 8249 lro->cur_tsecr = *(ptr+2); 8250 } 8251 lro->in_use = 1; 8252 } 8253 8254 static void update_L3L4_header(struct s2io_nic *sp, struct lro *lro) 8255 { 8256 struct iphdr *ip = lro->iph; 8257 struct tcphdr *tcp = lro->tcph; 8258 struct swStat *swstats = &sp->mac_control.stats_info->sw_stat; 8259 8260 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__); 8261 8262 /* Update L3 header */ 8263 csum_replace2(&ip->check, ip->tot_len, htons(lro->total_len)); 8264 ip->tot_len = htons(lro->total_len); 8265 8266 /* Update L4 header */ 8267 tcp->ack_seq = lro->tcp_ack; 8268 tcp->window = lro->window; 8269 8270 /* Update tsecr field if this session has timestamps enabled */ 8271 if (lro->saw_ts) { 8272 __be32 *ptr = (__be32 *)(tcp + 1); 8273 *(ptr+2) = lro->cur_tsecr; 8274 } 8275 8276 /* Update counters required for calculation of 8277 * average no. of packets aggregated. 8278 */ 8279 swstats->sum_avg_pkts_aggregated += lro->sg_num; 8280 swstats->num_aggregations++; 8281 } 8282 8283 static void aggregate_new_rx(struct lro *lro, struct iphdr *ip, 8284 struct tcphdr *tcp, u32 l4_pyld) 8285 { 8286 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__); 8287 lro->total_len += l4_pyld; 8288 lro->frags_len += l4_pyld; 8289 lro->tcp_next_seq += l4_pyld; 8290 lro->sg_num++; 8291 8292 /* Update ack seq no. and window ad(from this pkt) in LRO object */ 8293 lro->tcp_ack = tcp->ack_seq; 8294 lro->window = tcp->window; 8295 8296 if (lro->saw_ts) { 8297 __be32 *ptr; 8298 /* Update tsecr and tsval from this packet */ 8299 ptr = (__be32 *)(tcp+1); 8300 lro->cur_tsval = ntohl(*(ptr+1)); 8301 lro->cur_tsecr = *(ptr + 2); 8302 } 8303 } 8304 8305 static int verify_l3_l4_lro_capable(struct lro *l_lro, struct iphdr *ip, 8306 struct tcphdr *tcp, u32 tcp_pyld_len) 8307 { 8308 u8 *ptr; 8309 8310 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__); 8311 8312 if (!tcp_pyld_len) { 8313 /* Runt frame or a pure ack */ 8314 return -1; 8315 } 8316 8317 if (ip->ihl != 5) /* IP has options */ 8318 return -1; 8319 8320 /* If we see CE codepoint in IP header, packet is not mergeable */ 8321 if (INET_ECN_is_ce(ipv4_get_dsfield(ip))) 8322 return -1; 8323 8324 /* If we see ECE or CWR flags in TCP header, packet is not mergeable */ 8325 if (tcp->urg || tcp->psh || tcp->rst || 8326 tcp->syn || tcp->fin || 8327 tcp->ece || tcp->cwr || !tcp->ack) { 8328 /* 8329 * Currently recognize only the ack control word and 8330 * any other control field being set would result in 8331 * flushing the LRO session 8332 */ 8333 return -1; 8334 } 8335 8336 /* 8337 * Allow only one TCP timestamp option. Don't aggregate if 8338 * any other options are detected. 8339 */ 8340 if (tcp->doff != 5 && tcp->doff != 8) 8341 return -1; 8342 8343 if (tcp->doff == 8) { 8344 ptr = (u8 *)(tcp + 1); 8345 while (*ptr == TCPOPT_NOP) 8346 ptr++; 8347 if (*ptr != TCPOPT_TIMESTAMP || *(ptr+1) != TCPOLEN_TIMESTAMP) 8348 return -1; 8349 8350 /* Ensure timestamp value increases monotonically */ 8351 if (l_lro) 8352 if (l_lro->cur_tsval > ntohl(*((__be32 *)(ptr+2)))) 8353 return -1; 8354 8355 /* timestamp echo reply should be non-zero */ 8356 if (*((__be32 *)(ptr+6)) == 0) 8357 return -1; 8358 } 8359 8360 return 0; 8361 } 8362 8363 static int s2io_club_tcp_session(struct ring_info *ring_data, u8 *buffer, 8364 u8 **tcp, u32 *tcp_len, struct lro **lro, 8365 struct RxD_t *rxdp, struct s2io_nic *sp) 8366 { 8367 struct iphdr *ip; 8368 struct tcphdr *tcph; 8369 int ret = 0, i; 8370 u16 vlan_tag = 0; 8371 struct swStat *swstats = &sp->mac_control.stats_info->sw_stat; 8372 8373 ret = check_L2_lro_capable(buffer, &ip, (struct tcphdr **)tcp, 8374 rxdp, sp); 8375 if (ret) 8376 return ret; 8377 8378 DBG_PRINT(INFO_DBG, "IP Saddr: %x Daddr: %x\n", ip->saddr, ip->daddr); 8379 8380 vlan_tag = RXD_GET_VLAN_TAG(rxdp->Control_2); 8381 tcph = (struct tcphdr *)*tcp; 8382 *tcp_len = get_l4_pyld_length(ip, tcph); 8383 for (i = 0; i < MAX_LRO_SESSIONS; i++) { 8384 struct lro *l_lro = &ring_data->lro0_n[i]; 8385 if (l_lro->in_use) { 8386 if (check_for_socket_match(l_lro, ip, tcph)) 8387 continue; 8388 /* Sock pair matched */ 8389 *lro = l_lro; 8390 8391 if ((*lro)->tcp_next_seq != ntohl(tcph->seq)) { 8392 DBG_PRINT(INFO_DBG, "%s: Out of sequence. " 8393 "expected 0x%x, actual 0x%x\n", 8394 __func__, 8395 (*lro)->tcp_next_seq, 8396 ntohl(tcph->seq)); 8397 8398 swstats->outof_sequence_pkts++; 8399 ret = 2; 8400 break; 8401 } 8402 8403 if (!verify_l3_l4_lro_capable(l_lro, ip, tcph, 8404 *tcp_len)) 8405 ret = 1; /* Aggregate */ 8406 else 8407 ret = 2; /* Flush both */ 8408 break; 8409 } 8410 } 8411 8412 if (ret == 0) { 8413 /* Before searching for available LRO objects, 8414 * check if the pkt is L3/L4 aggregatable. If not 8415 * don't create new LRO session. Just send this 8416 * packet up. 8417 */ 8418 if (verify_l3_l4_lro_capable(NULL, ip, tcph, *tcp_len)) 8419 return 5; 8420 8421 for (i = 0; i < MAX_LRO_SESSIONS; i++) { 8422 struct lro *l_lro = &ring_data->lro0_n[i]; 8423 if (!(l_lro->in_use)) { 8424 *lro = l_lro; 8425 ret = 3; /* Begin anew */ 8426 break; 8427 } 8428 } 8429 } 8430 8431 if (ret == 0) { /* sessions exceeded */ 8432 DBG_PRINT(INFO_DBG, "%s: All LRO sessions already in use\n", 8433 __func__); 8434 *lro = NULL; 8435 return ret; 8436 } 8437 8438 switch (ret) { 8439 case 3: 8440 initiate_new_session(*lro, buffer, ip, tcph, *tcp_len, 8441 vlan_tag); 8442 break; 8443 case 2: 8444 update_L3L4_header(sp, *lro); 8445 break; 8446 case 1: 8447 aggregate_new_rx(*lro, ip, tcph, *tcp_len); 8448 if ((*lro)->sg_num == sp->lro_max_aggr_per_sess) { 8449 update_L3L4_header(sp, *lro); 8450 ret = 4; /* Flush the LRO */ 8451 } 8452 break; 8453 default: 8454 DBG_PRINT(ERR_DBG, "%s: Don't know, can't say!!\n", __func__); 8455 break; 8456 } 8457 8458 return ret; 8459 } 8460 8461 static void clear_lro_session(struct lro *lro) 8462 { 8463 static u16 lro_struct_size = sizeof(struct lro); 8464 8465 memset(lro, 0, lro_struct_size); 8466 } 8467 8468 static void queue_rx_frame(struct sk_buff *skb, u16 vlan_tag) 8469 { 8470 struct net_device *dev = skb->dev; 8471 struct s2io_nic *sp = netdev_priv(dev); 8472 8473 skb->protocol = eth_type_trans(skb, dev); 8474 if (vlan_tag && sp->vlan_strip_flag) 8475 __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag); 8476 if (sp->config.napi) 8477 netif_receive_skb(skb); 8478 else 8479 netif_rx(skb); 8480 } 8481 8482 static void lro_append_pkt(struct s2io_nic *sp, struct lro *lro, 8483 struct sk_buff *skb, u32 tcp_len) 8484 { 8485 struct sk_buff *first = lro->parent; 8486 struct swStat *swstats = &sp->mac_control.stats_info->sw_stat; 8487 8488 first->len += tcp_len; 8489 first->data_len = lro->frags_len; 8490 skb_pull(skb, (skb->len - tcp_len)); 8491 if (skb_shinfo(first)->frag_list) 8492 lro->last_frag->next = skb; 8493 else 8494 skb_shinfo(first)->frag_list = skb; 8495 first->truesize += skb->truesize; 8496 lro->last_frag = skb; 8497 swstats->clubbed_frms_cnt++; 8498 } 8499 8500 /** 8501 * s2io_io_error_detected - called when PCI error is detected 8502 * @pdev: Pointer to PCI device 8503 * @state: The current pci connection state 8504 * 8505 * This function is called after a PCI bus error affecting 8506 * this device has been detected. 8507 */ 8508 static pci_ers_result_t s2io_io_error_detected(struct pci_dev *pdev, 8509 pci_channel_state_t state) 8510 { 8511 struct net_device *netdev = pci_get_drvdata(pdev); 8512 struct s2io_nic *sp = netdev_priv(netdev); 8513 8514 netif_device_detach(netdev); 8515 8516 if (state == pci_channel_io_perm_failure) 8517 return PCI_ERS_RESULT_DISCONNECT; 8518 8519 if (netif_running(netdev)) { 8520 /* Bring down the card, while avoiding PCI I/O */ 8521 do_s2io_card_down(sp, 0); 8522 } 8523 pci_disable_device(pdev); 8524 8525 return PCI_ERS_RESULT_NEED_RESET; 8526 } 8527 8528 /** 8529 * s2io_io_slot_reset - called after the pci bus has been reset. 8530 * @pdev: Pointer to PCI device 8531 * 8532 * Restart the card from scratch, as if from a cold-boot. 8533 * At this point, the card has exprienced a hard reset, 8534 * followed by fixups by BIOS, and has its config space 8535 * set up identically to what it was at cold boot. 8536 */ 8537 static pci_ers_result_t s2io_io_slot_reset(struct pci_dev *pdev) 8538 { 8539 struct net_device *netdev = pci_get_drvdata(pdev); 8540 struct s2io_nic *sp = netdev_priv(netdev); 8541 8542 if (pci_enable_device(pdev)) { 8543 pr_err("Cannot re-enable PCI device after reset.\n"); 8544 return PCI_ERS_RESULT_DISCONNECT; 8545 } 8546 8547 pci_set_master(pdev); 8548 s2io_reset(sp); 8549 8550 return PCI_ERS_RESULT_RECOVERED; 8551 } 8552 8553 /** 8554 * s2io_io_resume - called when traffic can start flowing again. 8555 * @pdev: Pointer to PCI device 8556 * 8557 * This callback is called when the error recovery driver tells 8558 * us that its OK to resume normal operation. 8559 */ 8560 static void s2io_io_resume(struct pci_dev *pdev) 8561 { 8562 struct net_device *netdev = pci_get_drvdata(pdev); 8563 struct s2io_nic *sp = netdev_priv(netdev); 8564 8565 if (netif_running(netdev)) { 8566 if (s2io_card_up(sp)) { 8567 pr_err("Can't bring device back up after reset.\n"); 8568 return; 8569 } 8570 8571 if (s2io_set_mac_addr(netdev, netdev->dev_addr) == FAILURE) { 8572 s2io_card_down(sp); 8573 pr_err("Can't restore mac addr after reset.\n"); 8574 return; 8575 } 8576 } 8577 8578 netif_device_attach(netdev); 8579 netif_tx_wake_all_queues(netdev); 8580 } 8581