1 // SPDX-License-Identifier: GPL-2.0+ 2 /* Microchip Sparx5 Switch driver 3 * 4 * Copyright (c) 2021 Microchip Technology Inc. and its subsidiaries. 5 */ 6 7 #include <linux/module.h> 8 #include <linux/phy/phy.h> 9 10 #include "sparx5_main_regs.h" 11 #include "sparx5_main.h" 12 #include "sparx5_port.h" 13 14 #define SPX5_ETYPE_TAG_C 0x8100 15 #define SPX5_ETYPE_TAG_S 0x88a8 16 17 #define SPX5_WAIT_US 1000 18 #define SPX5_WAIT_MAX_US 2000 19 20 enum port_error { 21 SPX5_PERR_SPEED, 22 SPX5_PERR_IFTYPE, 23 }; 24 25 #define PAUSE_DISCARD 0xC 26 #define ETH_MAXLEN (ETH_DATA_LEN + ETH_HLEN + ETH_FCS_LEN) 27 28 static void decode_sgmii_word(u16 lp_abil, struct sparx5_port_status *status) 29 { 30 status->an_complete = true; 31 if (!(lp_abil & LPA_SGMII_LINK)) { 32 status->link = false; 33 return; 34 } 35 36 switch (lp_abil & LPA_SGMII_SPD_MASK) { 37 case LPA_SGMII_10: 38 status->speed = SPEED_10; 39 break; 40 case LPA_SGMII_100: 41 status->speed = SPEED_100; 42 break; 43 case LPA_SGMII_1000: 44 status->speed = SPEED_1000; 45 break; 46 default: 47 status->link = false; 48 return; 49 } 50 if (lp_abil & LPA_SGMII_FULL_DUPLEX) 51 status->duplex = DUPLEX_FULL; 52 else 53 status->duplex = DUPLEX_HALF; 54 } 55 56 static void decode_cl37_word(u16 lp_abil, uint16_t ld_abil, struct sparx5_port_status *status) 57 { 58 status->link = !(lp_abil & ADVERTISE_RFAULT) && status->link; 59 status->an_complete = true; 60 status->duplex = (ADVERTISE_1000XFULL & lp_abil) ? 61 DUPLEX_FULL : DUPLEX_UNKNOWN; // 1G HDX not supported 62 63 if ((ld_abil & ADVERTISE_1000XPAUSE) && 64 (lp_abil & ADVERTISE_1000XPAUSE)) { 65 status->pause = MLO_PAUSE_RX | MLO_PAUSE_TX; 66 } else if ((ld_abil & ADVERTISE_1000XPSE_ASYM) && 67 (lp_abil & ADVERTISE_1000XPSE_ASYM)) { 68 status->pause |= (lp_abil & ADVERTISE_1000XPAUSE) ? 69 MLO_PAUSE_TX : 0; 70 status->pause |= (ld_abil & ADVERTISE_1000XPAUSE) ? 71 MLO_PAUSE_RX : 0; 72 } else { 73 status->pause = MLO_PAUSE_NONE; 74 } 75 } 76 77 static int sparx5_get_dev2g5_status(struct sparx5 *sparx5, 78 struct sparx5_port *port, 79 struct sparx5_port_status *status) 80 { 81 u32 portno = port->portno; 82 u16 lp_adv, ld_adv; 83 u32 value; 84 85 /* Get PCS Link down sticky */ 86 value = spx5_rd(sparx5, DEV2G5_PCS1G_STICKY(portno)); 87 status->link_down = DEV2G5_PCS1G_STICKY_LINK_DOWN_STICKY_GET(value); 88 if (status->link_down) /* Clear the sticky */ 89 spx5_wr(value, sparx5, DEV2G5_PCS1G_STICKY(portno)); 90 91 /* Get both current Link and Sync status */ 92 value = spx5_rd(sparx5, DEV2G5_PCS1G_LINK_STATUS(portno)); 93 status->link = DEV2G5_PCS1G_LINK_STATUS_LINK_STATUS_GET(value) && 94 DEV2G5_PCS1G_LINK_STATUS_SYNC_STATUS_GET(value); 95 96 if (port->conf.portmode == PHY_INTERFACE_MODE_1000BASEX) 97 status->speed = SPEED_1000; 98 else if (port->conf.portmode == PHY_INTERFACE_MODE_2500BASEX) 99 status->speed = SPEED_2500; 100 101 status->duplex = DUPLEX_FULL; 102 103 /* Get PCS ANEG status register */ 104 value = spx5_rd(sparx5, DEV2G5_PCS1G_ANEG_STATUS(portno)); 105 106 /* Aneg complete provides more information */ 107 if (DEV2G5_PCS1G_ANEG_STATUS_ANEG_COMPLETE_GET(value)) { 108 lp_adv = DEV2G5_PCS1G_ANEG_STATUS_LP_ADV_ABILITY_GET(value); 109 if (port->conf.portmode == PHY_INTERFACE_MODE_SGMII) { 110 decode_sgmii_word(lp_adv, status); 111 } else { 112 value = spx5_rd(sparx5, DEV2G5_PCS1G_ANEG_CFG(portno)); 113 ld_adv = DEV2G5_PCS1G_ANEG_CFG_ADV_ABILITY_GET(value); 114 decode_cl37_word(lp_adv, ld_adv, status); 115 } 116 } 117 return 0; 118 } 119 120 static int sparx5_get_sfi_status(struct sparx5 *sparx5, 121 struct sparx5_port *port, 122 struct sparx5_port_status *status) 123 { 124 bool high_speed_dev = sparx5_is_baser(port->conf.portmode); 125 u32 portno = port->portno; 126 u32 value, dev, tinst; 127 void __iomem *inst; 128 129 if (!high_speed_dev) { 130 netdev_err(port->ndev, "error: low speed and SFI mode\n"); 131 return -EINVAL; 132 } 133 134 dev = sparx5_to_high_dev(portno); 135 tinst = sparx5_port_dev_index(portno); 136 inst = spx5_inst_get(sparx5, dev, tinst); 137 138 value = spx5_inst_rd(inst, DEV10G_MAC_TX_MONITOR_STICKY(0)); 139 if (value != DEV10G_MAC_TX_MONITOR_STICKY_IDLE_STATE_STICKY) { 140 /* The link is or has been down. Clear the sticky bit */ 141 status->link_down = 1; 142 spx5_inst_wr(0xffffffff, inst, DEV10G_MAC_TX_MONITOR_STICKY(0)); 143 value = spx5_inst_rd(inst, DEV10G_MAC_TX_MONITOR_STICKY(0)); 144 } 145 status->link = (value == DEV10G_MAC_TX_MONITOR_STICKY_IDLE_STATE_STICKY); 146 status->duplex = DUPLEX_FULL; 147 if (port->conf.portmode == PHY_INTERFACE_MODE_5GBASER) 148 status->speed = SPEED_5000; 149 else if (port->conf.portmode == PHY_INTERFACE_MODE_10GBASER) 150 status->speed = SPEED_10000; 151 else 152 status->speed = SPEED_25000; 153 154 return 0; 155 } 156 157 /* Get link status of 1000Base-X/in-band and SFI ports. 158 */ 159 int sparx5_get_port_status(struct sparx5 *sparx5, 160 struct sparx5_port *port, 161 struct sparx5_port_status *status) 162 { 163 memset(status, 0, sizeof(*status)); 164 status->speed = port->conf.speed; 165 if (port->conf.power_down) { 166 status->link = false; 167 return 0; 168 } 169 switch (port->conf.portmode) { 170 case PHY_INTERFACE_MODE_SGMII: 171 case PHY_INTERFACE_MODE_QSGMII: 172 case PHY_INTERFACE_MODE_1000BASEX: 173 case PHY_INTERFACE_MODE_2500BASEX: 174 return sparx5_get_dev2g5_status(sparx5, port, status); 175 case PHY_INTERFACE_MODE_5GBASER: 176 case PHY_INTERFACE_MODE_10GBASER: 177 case PHY_INTERFACE_MODE_25GBASER: 178 return sparx5_get_sfi_status(sparx5, port, status); 179 case PHY_INTERFACE_MODE_NA: 180 return 0; 181 default: 182 netdev_err(port->ndev, "Status not supported"); 183 return -ENODEV; 184 } 185 return 0; 186 } 187 188 static int sparx5_port_error(struct sparx5_port *port, 189 struct sparx5_port_config *conf, 190 enum port_error errtype) 191 { 192 switch (errtype) { 193 case SPX5_PERR_SPEED: 194 netdev_err(port->ndev, 195 "Interface does not support speed: %u: for %s\n", 196 conf->speed, phy_modes(conf->portmode)); 197 break; 198 case SPX5_PERR_IFTYPE: 199 netdev_err(port->ndev, 200 "Switch port does not support interface type: %s\n", 201 phy_modes(conf->portmode)); 202 break; 203 default: 204 netdev_err(port->ndev, 205 "Interface configuration error\n"); 206 } 207 208 return -EINVAL; 209 } 210 211 static int sparx5_port_verify_speed(struct sparx5 *sparx5, 212 struct sparx5_port *port, 213 struct sparx5_port_config *conf) 214 { 215 if ((sparx5_port_is_2g5(port->portno) && 216 conf->speed > SPEED_2500) || 217 (sparx5_port_is_5g(port->portno) && 218 conf->speed > SPEED_5000) || 219 (sparx5_port_is_10g(port->portno) && 220 conf->speed > SPEED_10000)) 221 return sparx5_port_error(port, conf, SPX5_PERR_SPEED); 222 223 switch (conf->portmode) { 224 case PHY_INTERFACE_MODE_NA: 225 return -EINVAL; 226 case PHY_INTERFACE_MODE_1000BASEX: 227 if (conf->speed != SPEED_1000 || 228 sparx5_port_is_2g5(port->portno)) 229 return sparx5_port_error(port, conf, SPX5_PERR_SPEED); 230 if (sparx5_port_is_2g5(port->portno)) 231 return sparx5_port_error(port, conf, SPX5_PERR_IFTYPE); 232 break; 233 case PHY_INTERFACE_MODE_2500BASEX: 234 if (conf->speed != SPEED_2500 || 235 sparx5_port_is_2g5(port->portno)) 236 return sparx5_port_error(port, conf, SPX5_PERR_SPEED); 237 break; 238 case PHY_INTERFACE_MODE_QSGMII: 239 if (port->portno > 47) 240 return sparx5_port_error(port, conf, SPX5_PERR_IFTYPE); 241 fallthrough; 242 case PHY_INTERFACE_MODE_SGMII: 243 if (conf->speed != SPEED_1000 && 244 conf->speed != SPEED_100 && 245 conf->speed != SPEED_10 && 246 conf->speed != SPEED_2500) 247 return sparx5_port_error(port, conf, SPX5_PERR_SPEED); 248 break; 249 case PHY_INTERFACE_MODE_5GBASER: 250 case PHY_INTERFACE_MODE_10GBASER: 251 case PHY_INTERFACE_MODE_25GBASER: 252 if ((conf->speed != SPEED_5000 && 253 conf->speed != SPEED_10000 && 254 conf->speed != SPEED_25000)) 255 return sparx5_port_error(port, conf, SPX5_PERR_SPEED); 256 break; 257 default: 258 return sparx5_port_error(port, conf, SPX5_PERR_IFTYPE); 259 } 260 return 0; 261 } 262 263 static bool sparx5_dev_change(struct sparx5 *sparx5, 264 struct sparx5_port *port, 265 struct sparx5_port_config *conf) 266 { 267 return sparx5_is_baser(port->conf.portmode) ^ 268 sparx5_is_baser(conf->portmode); 269 } 270 271 static int sparx5_port_flush_poll(struct sparx5 *sparx5, u32 portno) 272 { 273 u32 value, resource, prio, delay_cnt = 0; 274 bool poll_src = true; 275 char *mem = ""; 276 277 /* Resource == 0: Memory tracked per source (SRC-MEM) 278 * Resource == 1: Frame references tracked per source (SRC-REF) 279 * Resource == 2: Memory tracked per destination (DST-MEM) 280 * Resource == 3: Frame references tracked per destination. (DST-REF) 281 */ 282 while (1) { 283 bool empty = true; 284 285 for (resource = 0; resource < (poll_src ? 2 : 1); resource++) { 286 u32 base; 287 288 base = (resource == 0 ? 2048 : 0) + SPX5_PRIOS * portno; 289 for (prio = 0; prio < SPX5_PRIOS; prio++) { 290 value = spx5_rd(sparx5, 291 QRES_RES_STAT(base + prio)); 292 if (value) { 293 mem = resource == 0 ? 294 "DST-MEM" : "SRC-MEM"; 295 empty = false; 296 } 297 } 298 } 299 300 if (empty) 301 break; 302 303 if (delay_cnt++ == 2000) { 304 dev_err(sparx5->dev, 305 "Flush timeout port %u. %s queue not empty\n", 306 portno, mem); 307 return -EINVAL; 308 } 309 310 usleep_range(SPX5_WAIT_US, SPX5_WAIT_MAX_US); 311 } 312 return 0; 313 } 314 315 static int sparx5_port_disable(struct sparx5 *sparx5, struct sparx5_port *port, bool high_spd_dev) 316 { 317 u32 tinst = high_spd_dev ? 318 sparx5_port_dev_index(port->portno) : port->portno; 319 u32 dev = high_spd_dev ? 320 sparx5_to_high_dev(port->portno) : TARGET_DEV2G5; 321 void __iomem *devinst = spx5_inst_get(sparx5, dev, tinst); 322 u32 spd = port->conf.speed; 323 u32 spd_prm; 324 int err; 325 326 if (high_spd_dev) { 327 /* 1: Reset the PCS Rx clock domain */ 328 spx5_inst_rmw(DEV10G_DEV_RST_CTRL_PCS_RX_RST, 329 DEV10G_DEV_RST_CTRL_PCS_RX_RST, 330 devinst, 331 DEV10G_DEV_RST_CTRL(0)); 332 333 /* 2: Disable MAC frame reception */ 334 spx5_inst_rmw(0, 335 DEV10G_MAC_ENA_CFG_RX_ENA, 336 devinst, 337 DEV10G_MAC_ENA_CFG(0)); 338 } else { 339 /* 1: Reset the PCS Rx clock domain */ 340 spx5_inst_rmw(DEV2G5_DEV_RST_CTRL_PCS_RX_RST, 341 DEV2G5_DEV_RST_CTRL_PCS_RX_RST, 342 devinst, 343 DEV2G5_DEV_RST_CTRL(0)); 344 /* 2: Disable MAC frame reception */ 345 spx5_inst_rmw(0, 346 DEV2G5_MAC_ENA_CFG_RX_ENA, 347 devinst, 348 DEV2G5_MAC_ENA_CFG(0)); 349 } 350 /* 3: Disable traffic being sent to or from switch port->portno */ 351 spx5_rmw(0, 352 QFWD_SWITCH_PORT_MODE_PORT_ENA, 353 sparx5, 354 QFWD_SWITCH_PORT_MODE(port->portno)); 355 356 /* 4: Disable dequeuing from the egress queues */ 357 spx5_rmw(HSCH_PORT_MODE_DEQUEUE_DIS, 358 HSCH_PORT_MODE_DEQUEUE_DIS, 359 sparx5, 360 HSCH_PORT_MODE(port->portno)); 361 362 /* 5: Disable Flowcontrol */ 363 spx5_rmw(QSYS_PAUSE_CFG_PAUSE_STOP_SET(0xFFF - 1), 364 QSYS_PAUSE_CFG_PAUSE_STOP, 365 sparx5, 366 QSYS_PAUSE_CFG(port->portno)); 367 368 spd_prm = spd == SPEED_10 ? 1000 : spd == SPEED_100 ? 100 : 10; 369 /* 6: Wait while the last frame is exiting the queues */ 370 usleep_range(8 * spd_prm, 10 * spd_prm); 371 372 /* 7: Flush the queues accociated with the port->portno */ 373 spx5_rmw(HSCH_FLUSH_CTRL_FLUSH_PORT_SET(port->portno) | 374 HSCH_FLUSH_CTRL_FLUSH_DST_SET(1) | 375 HSCH_FLUSH_CTRL_FLUSH_SRC_SET(1) | 376 HSCH_FLUSH_CTRL_FLUSH_ENA_SET(1), 377 HSCH_FLUSH_CTRL_FLUSH_PORT | 378 HSCH_FLUSH_CTRL_FLUSH_DST | 379 HSCH_FLUSH_CTRL_FLUSH_SRC | 380 HSCH_FLUSH_CTRL_FLUSH_ENA, 381 sparx5, 382 HSCH_FLUSH_CTRL); 383 384 /* 8: Enable dequeuing from the egress queues */ 385 spx5_rmw(0, 386 HSCH_PORT_MODE_DEQUEUE_DIS, 387 sparx5, 388 HSCH_PORT_MODE(port->portno)); 389 390 /* 9: Wait until flushing is complete */ 391 err = sparx5_port_flush_poll(sparx5, port->portno); 392 if (err) 393 return err; 394 395 /* 10: Reset the MAC clock domain */ 396 if (high_spd_dev) { 397 spx5_inst_rmw(DEV10G_DEV_RST_CTRL_PCS_TX_RST_SET(1) | 398 DEV10G_DEV_RST_CTRL_MAC_RX_RST_SET(1) | 399 DEV10G_DEV_RST_CTRL_MAC_TX_RST_SET(1), 400 DEV10G_DEV_RST_CTRL_PCS_TX_RST | 401 DEV10G_DEV_RST_CTRL_MAC_RX_RST | 402 DEV10G_DEV_RST_CTRL_MAC_TX_RST, 403 devinst, 404 DEV10G_DEV_RST_CTRL(0)); 405 406 } else { 407 spx5_inst_rmw(DEV2G5_DEV_RST_CTRL_SPEED_SEL_SET(3) | 408 DEV2G5_DEV_RST_CTRL_PCS_TX_RST_SET(1) | 409 DEV2G5_DEV_RST_CTRL_PCS_RX_RST_SET(1) | 410 DEV2G5_DEV_RST_CTRL_MAC_TX_RST_SET(1) | 411 DEV2G5_DEV_RST_CTRL_MAC_RX_RST_SET(1), 412 DEV2G5_DEV_RST_CTRL_SPEED_SEL | 413 DEV2G5_DEV_RST_CTRL_PCS_TX_RST | 414 DEV2G5_DEV_RST_CTRL_PCS_RX_RST | 415 DEV2G5_DEV_RST_CTRL_MAC_TX_RST | 416 DEV2G5_DEV_RST_CTRL_MAC_RX_RST, 417 devinst, 418 DEV2G5_DEV_RST_CTRL(0)); 419 } 420 /* 11: Clear flushing */ 421 spx5_rmw(HSCH_FLUSH_CTRL_FLUSH_PORT_SET(port->portno) | 422 HSCH_FLUSH_CTRL_FLUSH_ENA_SET(0), 423 HSCH_FLUSH_CTRL_FLUSH_PORT | 424 HSCH_FLUSH_CTRL_FLUSH_ENA, 425 sparx5, 426 HSCH_FLUSH_CTRL); 427 428 if (high_spd_dev) { 429 u32 pcs = sparx5_to_pcs_dev(port->portno); 430 void __iomem *pcsinst = spx5_inst_get(sparx5, pcs, tinst); 431 432 /* 12: Disable 5G/10G/25 BaseR PCS */ 433 spx5_inst_rmw(PCS10G_BR_PCS_CFG_PCS_ENA_SET(0), 434 PCS10G_BR_PCS_CFG_PCS_ENA, 435 pcsinst, 436 PCS10G_BR_PCS_CFG(0)); 437 438 if (sparx5_port_is_25g(port->portno)) 439 /* Disable 25G PCS */ 440 spx5_rmw(DEV25G_PCS25G_CFG_PCS25G_ENA_SET(0), 441 DEV25G_PCS25G_CFG_PCS25G_ENA, 442 sparx5, 443 DEV25G_PCS25G_CFG(tinst)); 444 } else { 445 /* 12: Disable 1G PCS */ 446 spx5_rmw(DEV2G5_PCS1G_CFG_PCS_ENA_SET(0), 447 DEV2G5_PCS1G_CFG_PCS_ENA, 448 sparx5, 449 DEV2G5_PCS1G_CFG(port->portno)); 450 } 451 452 /* The port is now flushed and disabled */ 453 return 0; 454 } 455 456 static int sparx5_port_fifo_sz(struct sparx5 *sparx5, 457 u32 portno, u32 speed) 458 { 459 u32 sys_clk = sparx5_clk_period(sparx5->coreclock); 460 const u32 taxi_dist[SPX5_PORTS_ALL] = { 461 6, 8, 10, 6, 8, 10, 6, 8, 10, 6, 8, 10, 462 4, 4, 4, 4, 463 11, 12, 13, 14, 15, 16, 17, 18, 464 11, 12, 13, 14, 15, 16, 17, 18, 465 11, 12, 13, 14, 15, 16, 17, 18, 466 11, 12, 13, 14, 15, 16, 17, 18, 467 4, 6, 8, 4, 6, 8, 6, 8, 468 2, 2, 2, 2, 2, 2, 2, 4, 2 469 }; 470 u32 mac_per = 6400, tmp1, tmp2, tmp3; 471 u32 fifo_width = 16; 472 u32 mac_width = 8; 473 u32 addition = 0; 474 475 switch (speed) { 476 case SPEED_25000: 477 return 0; 478 case SPEED_10000: 479 mac_per = 6400; 480 mac_width = 8; 481 addition = 1; 482 break; 483 case SPEED_5000: 484 mac_per = 12800; 485 mac_width = 8; 486 addition = 0; 487 break; 488 case SPEED_2500: 489 mac_per = 3200; 490 mac_width = 1; 491 addition = 0; 492 break; 493 case SPEED_1000: 494 mac_per = 8000; 495 mac_width = 1; 496 addition = 0; 497 break; 498 case SPEED_100: 499 case SPEED_10: 500 return 1; 501 default: 502 break; 503 } 504 505 tmp1 = 1000 * mac_width / fifo_width; 506 tmp2 = 3000 + ((12000 + 2 * taxi_dist[portno] * 1000) 507 * sys_clk / mac_per); 508 tmp3 = tmp1 * tmp2 / 1000; 509 return (tmp3 + 2000 + 999) / 1000 + addition; 510 } 511 512 /* Configure port muxing: 513 * QSGMII: 4x2G5 devices 514 */ 515 static int sparx5_port_mux_set(struct sparx5 *sparx5, 516 struct sparx5_port *port, 517 struct sparx5_port_config *conf) 518 { 519 u32 portno = port->portno; 520 u32 inst; 521 522 if (port->conf.portmode == conf->portmode) 523 return 0; /* Nothing to do */ 524 525 switch (conf->portmode) { 526 case PHY_INTERFACE_MODE_QSGMII: /* QSGMII: 4x2G5 devices. Mode Q' */ 527 inst = (portno - portno % 4) / 4; 528 spx5_rmw(BIT(inst), 529 BIT(inst), 530 sparx5, 531 PORT_CONF_QSGMII_ENA); 532 533 if ((portno / 4 % 2) == 0) { 534 /* Affects d0-d3,d8-d11..d40-d43 */ 535 spx5_rmw(PORT_CONF_USGMII_CFG_BYPASS_SCRAM_SET(1) | 536 PORT_CONF_USGMII_CFG_BYPASS_DESCRAM_SET(1) | 537 PORT_CONF_USGMII_CFG_QUAD_MODE_SET(1), 538 PORT_CONF_USGMII_CFG_BYPASS_SCRAM | 539 PORT_CONF_USGMII_CFG_BYPASS_DESCRAM | 540 PORT_CONF_USGMII_CFG_QUAD_MODE, 541 sparx5, 542 PORT_CONF_USGMII_CFG((portno / 8))); 543 } 544 break; 545 default: 546 break; 547 } 548 return 0; 549 } 550 551 static int sparx5_port_max_tags_set(struct sparx5 *sparx5, 552 struct sparx5_port *port) 553 { 554 enum sparx5_port_max_tags max_tags = port->max_vlan_tags; 555 int tag_ct = max_tags == SPX5_PORT_MAX_TAGS_ONE ? 1 : 556 max_tags == SPX5_PORT_MAX_TAGS_TWO ? 2 : 0; 557 bool dtag = max_tags == SPX5_PORT_MAX_TAGS_TWO; 558 enum sparx5_vlan_port_type vlan_type = port->vlan_type; 559 bool dotag = max_tags != SPX5_PORT_MAX_TAGS_NONE; 560 u32 dev = sparx5_to_high_dev(port->portno); 561 u32 tinst = sparx5_port_dev_index(port->portno); 562 void __iomem *inst = spx5_inst_get(sparx5, dev, tinst); 563 u32 etype; 564 565 etype = (vlan_type == SPX5_VLAN_PORT_TYPE_S_CUSTOM ? 566 port->custom_etype : 567 vlan_type == SPX5_VLAN_PORT_TYPE_C ? 568 SPX5_ETYPE_TAG_C : SPX5_ETYPE_TAG_S); 569 570 spx5_wr(DEV2G5_MAC_TAGS_CFG_TAG_ID_SET(etype) | 571 DEV2G5_MAC_TAGS_CFG_PB_ENA_SET(dtag) | 572 DEV2G5_MAC_TAGS_CFG_VLAN_AWR_ENA_SET(dotag) | 573 DEV2G5_MAC_TAGS_CFG_VLAN_LEN_AWR_ENA_SET(dotag), 574 sparx5, 575 DEV2G5_MAC_TAGS_CFG(port->portno)); 576 577 if (sparx5_port_is_2g5(port->portno)) 578 return 0; 579 580 spx5_inst_rmw(DEV10G_MAC_TAGS_CFG_TAG_ID_SET(etype) | 581 DEV10G_MAC_TAGS_CFG_TAG_ENA_SET(dotag), 582 DEV10G_MAC_TAGS_CFG_TAG_ID | 583 DEV10G_MAC_TAGS_CFG_TAG_ENA, 584 inst, 585 DEV10G_MAC_TAGS_CFG(0, 0)); 586 587 spx5_inst_rmw(DEV10G_MAC_NUM_TAGS_CFG_NUM_TAGS_SET(tag_ct), 588 DEV10G_MAC_NUM_TAGS_CFG_NUM_TAGS, 589 inst, 590 DEV10G_MAC_NUM_TAGS_CFG(0)); 591 592 spx5_inst_rmw(DEV10G_MAC_MAXLEN_CFG_MAX_LEN_TAG_CHK_SET(dotag), 593 DEV10G_MAC_MAXLEN_CFG_MAX_LEN_TAG_CHK, 594 inst, 595 DEV10G_MAC_MAXLEN_CFG(0)); 596 return 0; 597 } 598 599 int sparx5_port_fwd_urg(struct sparx5 *sparx5, u32 speed) 600 { 601 u32 clk_period_ps = 1600; /* 625Mhz for now */ 602 u32 urg = 672000; 603 604 switch (speed) { 605 case SPEED_10: 606 case SPEED_100: 607 case SPEED_1000: 608 urg = 672000; 609 break; 610 case SPEED_2500: 611 urg = 270000; 612 break; 613 case SPEED_5000: 614 urg = 135000; 615 break; 616 case SPEED_10000: 617 urg = 67200; 618 break; 619 case SPEED_25000: 620 urg = 27000; 621 break; 622 } 623 return urg / clk_period_ps - 1; 624 } 625 626 static u16 sparx5_wm_enc(u16 value) 627 { 628 if (value >= 2048) 629 return 2048 + value / 16; 630 631 return value; 632 } 633 634 static int sparx5_port_fc_setup(struct sparx5 *sparx5, 635 struct sparx5_port *port, 636 struct sparx5_port_config *conf) 637 { 638 bool fc_obey = conf->pause & MLO_PAUSE_RX ? 1 : 0; 639 u32 pause_stop = 0xFFF - 1; /* FC gen disabled */ 640 641 if (conf->pause & MLO_PAUSE_TX) 642 pause_stop = sparx5_wm_enc(4 * (ETH_MAXLEN / 643 SPX5_BUFFER_CELL_SZ)); 644 645 /* Set HDX flowcontrol */ 646 spx5_rmw(DSM_MAC_CFG_HDX_BACKPREASSURE_SET(conf->duplex == DUPLEX_HALF), 647 DSM_MAC_CFG_HDX_BACKPREASSURE, 648 sparx5, 649 DSM_MAC_CFG(port->portno)); 650 651 /* Obey flowcontrol */ 652 spx5_rmw(DSM_RX_PAUSE_CFG_RX_PAUSE_EN_SET(fc_obey), 653 DSM_RX_PAUSE_CFG_RX_PAUSE_EN, 654 sparx5, 655 DSM_RX_PAUSE_CFG(port->portno)); 656 657 /* Disable forward pressure */ 658 spx5_rmw(QSYS_FWD_PRESSURE_FWD_PRESSURE_DIS_SET(fc_obey), 659 QSYS_FWD_PRESSURE_FWD_PRESSURE_DIS, 660 sparx5, 661 QSYS_FWD_PRESSURE(port->portno)); 662 663 /* Generate pause frames */ 664 spx5_rmw(QSYS_PAUSE_CFG_PAUSE_STOP_SET(pause_stop), 665 QSYS_PAUSE_CFG_PAUSE_STOP, 666 sparx5, 667 QSYS_PAUSE_CFG(port->portno)); 668 669 return 0; 670 } 671 672 static u16 sparx5_get_aneg_word(struct sparx5_port_config *conf) 673 { 674 if (conf->portmode == PHY_INTERFACE_MODE_1000BASEX) /* cl-37 aneg */ 675 return (conf->pause_adv | ADVERTISE_LPACK | ADVERTISE_1000XFULL); 676 else 677 return 1; /* Enable SGMII Aneg */ 678 } 679 680 int sparx5_serdes_set(struct sparx5 *sparx5, 681 struct sparx5_port *port, 682 struct sparx5_port_config *conf) 683 { 684 int portmode, err, speed = conf->speed; 685 686 if (conf->portmode == PHY_INTERFACE_MODE_QSGMII && 687 ((port->portno % 4) != 0)) { 688 return 0; 689 } 690 if (sparx5_is_baser(conf->portmode)) { 691 if (conf->portmode == PHY_INTERFACE_MODE_25GBASER) 692 speed = SPEED_25000; 693 else if (conf->portmode == PHY_INTERFACE_MODE_10GBASER) 694 speed = SPEED_10000; 695 else 696 speed = SPEED_5000; 697 } 698 699 err = phy_set_media(port->serdes, conf->media); 700 if (err) 701 return err; 702 if (speed > 0) { 703 err = phy_set_speed(port->serdes, speed); 704 if (err) 705 return err; 706 } 707 if (conf->serdes_reset) { 708 err = phy_reset(port->serdes); 709 if (err) 710 return err; 711 } 712 713 /* Configure SerDes with port parameters 714 * For BaseR, the serdes driver supports 10GGBASE-R and speed 5G/10G/25G 715 */ 716 portmode = conf->portmode; 717 if (sparx5_is_baser(conf->portmode)) 718 portmode = PHY_INTERFACE_MODE_10GBASER; 719 err = phy_set_mode_ext(port->serdes, PHY_MODE_ETHERNET, portmode); 720 if (err) 721 return err; 722 conf->serdes_reset = false; 723 return err; 724 } 725 726 static int sparx5_port_pcs_low_set(struct sparx5 *sparx5, 727 struct sparx5_port *port, 728 struct sparx5_port_config *conf) 729 { 730 bool sgmii = false, inband_aneg = false; 731 int err; 732 733 if (port->conf.inband) { 734 if (conf->portmode == PHY_INTERFACE_MODE_SGMII || 735 conf->portmode == PHY_INTERFACE_MODE_QSGMII) 736 inband_aneg = true; /* Cisco-SGMII in-band-aneg */ 737 else if (conf->portmode == PHY_INTERFACE_MODE_1000BASEX && 738 conf->autoneg) 739 inband_aneg = true; /* Clause-37 in-band-aneg */ 740 741 err = sparx5_serdes_set(sparx5, port, conf); 742 if (err) 743 return -EINVAL; 744 } else { 745 sgmii = true; /* Phy is connected to the MAC */ 746 } 747 748 /* Choose SGMII or 1000BaseX/2500BaseX PCS mode */ 749 spx5_rmw(DEV2G5_PCS1G_MODE_CFG_SGMII_MODE_ENA_SET(sgmii), 750 DEV2G5_PCS1G_MODE_CFG_SGMII_MODE_ENA, 751 sparx5, 752 DEV2G5_PCS1G_MODE_CFG(port->portno)); 753 754 /* Enable PCS */ 755 spx5_wr(DEV2G5_PCS1G_CFG_PCS_ENA_SET(1), 756 sparx5, 757 DEV2G5_PCS1G_CFG(port->portno)); 758 759 if (inband_aneg) { 760 u16 abil = sparx5_get_aneg_word(conf); 761 762 /* Enable in-band aneg */ 763 spx5_wr(DEV2G5_PCS1G_ANEG_CFG_ADV_ABILITY_SET(abil) | 764 DEV2G5_PCS1G_ANEG_CFG_SW_RESOLVE_ENA_SET(1) | 765 DEV2G5_PCS1G_ANEG_CFG_ANEG_ENA_SET(1) | 766 DEV2G5_PCS1G_ANEG_CFG_ANEG_RESTART_ONE_SHOT_SET(1), 767 sparx5, 768 DEV2G5_PCS1G_ANEG_CFG(port->portno)); 769 } else { 770 spx5_wr(0, sparx5, DEV2G5_PCS1G_ANEG_CFG(port->portno)); 771 } 772 773 /* Take PCS out of reset */ 774 spx5_rmw(DEV2G5_DEV_RST_CTRL_SPEED_SEL_SET(2) | 775 DEV2G5_DEV_RST_CTRL_PCS_TX_RST_SET(0) | 776 DEV2G5_DEV_RST_CTRL_PCS_RX_RST_SET(0), 777 DEV2G5_DEV_RST_CTRL_SPEED_SEL | 778 DEV2G5_DEV_RST_CTRL_PCS_TX_RST | 779 DEV2G5_DEV_RST_CTRL_PCS_RX_RST, 780 sparx5, 781 DEV2G5_DEV_RST_CTRL(port->portno)); 782 783 return 0; 784 } 785 786 static int sparx5_port_pcs_high_set(struct sparx5 *sparx5, 787 struct sparx5_port *port, 788 struct sparx5_port_config *conf) 789 { 790 u32 clk_spd = conf->portmode == PHY_INTERFACE_MODE_5GBASER ? 1 : 0; 791 u32 pix = sparx5_port_dev_index(port->portno); 792 u32 dev = sparx5_to_high_dev(port->portno); 793 u32 pcs = sparx5_to_pcs_dev(port->portno); 794 void __iomem *devinst; 795 void __iomem *pcsinst; 796 int err; 797 798 devinst = spx5_inst_get(sparx5, dev, pix); 799 pcsinst = spx5_inst_get(sparx5, pcs, pix); 800 801 /* SFI : No in-band-aneg. Speeds 5G/10G/25G */ 802 err = sparx5_serdes_set(sparx5, port, conf); 803 if (err) 804 return -EINVAL; 805 if (conf->portmode == PHY_INTERFACE_MODE_25GBASER) { 806 /* Enable PCS for 25G device, speed 25G */ 807 spx5_rmw(DEV25G_PCS25G_CFG_PCS25G_ENA_SET(1), 808 DEV25G_PCS25G_CFG_PCS25G_ENA, 809 sparx5, 810 DEV25G_PCS25G_CFG(pix)); 811 } else { 812 /* Enable PCS for 5G/10G/25G devices, speed 5G/10G */ 813 spx5_inst_rmw(PCS10G_BR_PCS_CFG_PCS_ENA_SET(1), 814 PCS10G_BR_PCS_CFG_PCS_ENA, 815 pcsinst, 816 PCS10G_BR_PCS_CFG(0)); 817 } 818 819 /* Enable 5G/10G/25G MAC module */ 820 spx5_inst_wr(DEV10G_MAC_ENA_CFG_RX_ENA_SET(1) | 821 DEV10G_MAC_ENA_CFG_TX_ENA_SET(1), 822 devinst, 823 DEV10G_MAC_ENA_CFG(0)); 824 825 /* Take the device out of reset */ 826 spx5_inst_rmw(DEV10G_DEV_RST_CTRL_PCS_RX_RST_SET(0) | 827 DEV10G_DEV_RST_CTRL_PCS_TX_RST_SET(0) | 828 DEV10G_DEV_RST_CTRL_MAC_RX_RST_SET(0) | 829 DEV10G_DEV_RST_CTRL_MAC_TX_RST_SET(0) | 830 DEV10G_DEV_RST_CTRL_SPEED_SEL_SET(clk_spd), 831 DEV10G_DEV_RST_CTRL_PCS_RX_RST | 832 DEV10G_DEV_RST_CTRL_PCS_TX_RST | 833 DEV10G_DEV_RST_CTRL_MAC_RX_RST | 834 DEV10G_DEV_RST_CTRL_MAC_TX_RST | 835 DEV10G_DEV_RST_CTRL_SPEED_SEL, 836 devinst, 837 DEV10G_DEV_RST_CTRL(0)); 838 839 return 0; 840 } 841 842 /* Switch between 1G/2500 and 5G/10G/25G devices */ 843 static void sparx5_dev_switch(struct sparx5 *sparx5, int port, bool hsd) 844 { 845 int bt_indx = BIT(sparx5_port_dev_index(port)); 846 847 if (sparx5_port_is_5g(port)) { 848 spx5_rmw(hsd ? 0 : bt_indx, 849 bt_indx, 850 sparx5, 851 PORT_CONF_DEV5G_MODES); 852 } else if (sparx5_port_is_10g(port)) { 853 spx5_rmw(hsd ? 0 : bt_indx, 854 bt_indx, 855 sparx5, 856 PORT_CONF_DEV10G_MODES); 857 } else if (sparx5_port_is_25g(port)) { 858 spx5_rmw(hsd ? 0 : bt_indx, 859 bt_indx, 860 sparx5, 861 PORT_CONF_DEV25G_MODES); 862 } 863 } 864 865 /* Configure speed/duplex dependent registers */ 866 static int sparx5_port_config_low_set(struct sparx5 *sparx5, 867 struct sparx5_port *port, 868 struct sparx5_port_config *conf) 869 { 870 u32 clk_spd, gig_mode, tx_gap, hdx_gap_1, hdx_gap_2; 871 bool fdx = conf->duplex == DUPLEX_FULL; 872 int spd = conf->speed; 873 874 clk_spd = spd == SPEED_10 ? 0 : spd == SPEED_100 ? 1 : 2; 875 gig_mode = spd == SPEED_1000 || spd == SPEED_2500; 876 tx_gap = spd == SPEED_1000 ? 4 : fdx ? 6 : 5; 877 hdx_gap_1 = spd == SPEED_1000 ? 0 : spd == SPEED_100 ? 1 : 2; 878 hdx_gap_2 = spd == SPEED_1000 ? 0 : spd == SPEED_100 ? 4 : 1; 879 880 /* GIG/FDX mode */ 881 spx5_rmw(DEV2G5_MAC_MODE_CFG_GIGA_MODE_ENA_SET(gig_mode) | 882 DEV2G5_MAC_MODE_CFG_FDX_ENA_SET(fdx), 883 DEV2G5_MAC_MODE_CFG_GIGA_MODE_ENA | 884 DEV2G5_MAC_MODE_CFG_FDX_ENA, 885 sparx5, 886 DEV2G5_MAC_MODE_CFG(port->portno)); 887 888 /* Set MAC IFG Gaps */ 889 spx5_wr(DEV2G5_MAC_IFG_CFG_TX_IFG_SET(tx_gap) | 890 DEV2G5_MAC_IFG_CFG_RX_IFG1_SET(hdx_gap_1) | 891 DEV2G5_MAC_IFG_CFG_RX_IFG2_SET(hdx_gap_2), 892 sparx5, 893 DEV2G5_MAC_IFG_CFG(port->portno)); 894 895 /* Disabling frame aging when in HDX (due to HDX issue) */ 896 spx5_rmw(HSCH_PORT_MODE_AGE_DIS_SET(fdx == 0), 897 HSCH_PORT_MODE_AGE_DIS, 898 sparx5, 899 HSCH_PORT_MODE(port->portno)); 900 901 /* Enable MAC module */ 902 spx5_wr(DEV2G5_MAC_ENA_CFG_RX_ENA | 903 DEV2G5_MAC_ENA_CFG_TX_ENA, 904 sparx5, 905 DEV2G5_MAC_ENA_CFG(port->portno)); 906 907 /* Select speed and take MAC out of reset */ 908 spx5_rmw(DEV2G5_DEV_RST_CTRL_SPEED_SEL_SET(clk_spd) | 909 DEV2G5_DEV_RST_CTRL_MAC_TX_RST_SET(0) | 910 DEV2G5_DEV_RST_CTRL_MAC_RX_RST_SET(0), 911 DEV2G5_DEV_RST_CTRL_SPEED_SEL | 912 DEV2G5_DEV_RST_CTRL_MAC_TX_RST | 913 DEV2G5_DEV_RST_CTRL_MAC_RX_RST, 914 sparx5, 915 DEV2G5_DEV_RST_CTRL(port->portno)); 916 917 return 0; 918 } 919 920 int sparx5_port_pcs_set(struct sparx5 *sparx5, 921 struct sparx5_port *port, 922 struct sparx5_port_config *conf) 923 924 { 925 bool high_speed_dev = sparx5_is_baser(conf->portmode); 926 int err; 927 928 if (sparx5_dev_change(sparx5, port, conf)) { 929 /* switch device */ 930 sparx5_dev_switch(sparx5, port->portno, high_speed_dev); 931 932 /* Disable the not-in-use device */ 933 err = sparx5_port_disable(sparx5, port, !high_speed_dev); 934 if (err) 935 return err; 936 } 937 /* Disable the port before re-configuring */ 938 err = sparx5_port_disable(sparx5, port, high_speed_dev); 939 if (err) 940 return -EINVAL; 941 942 if (high_speed_dev) 943 err = sparx5_port_pcs_high_set(sparx5, port, conf); 944 else 945 err = sparx5_port_pcs_low_set(sparx5, port, conf); 946 947 if (err) 948 return -EINVAL; 949 950 if (port->conf.inband) { 951 /* Enable/disable 1G counters in ASM */ 952 spx5_rmw(ASM_PORT_CFG_CSC_STAT_DIS_SET(high_speed_dev), 953 ASM_PORT_CFG_CSC_STAT_DIS, 954 sparx5, 955 ASM_PORT_CFG(port->portno)); 956 957 /* Enable/disable 1G counters in DSM */ 958 spx5_rmw(DSM_BUF_CFG_CSC_STAT_DIS_SET(high_speed_dev), 959 DSM_BUF_CFG_CSC_STAT_DIS, 960 sparx5, 961 DSM_BUF_CFG(port->portno)); 962 } 963 964 port->conf = *conf; 965 966 return 0; 967 } 968 969 int sparx5_port_config(struct sparx5 *sparx5, 970 struct sparx5_port *port, 971 struct sparx5_port_config *conf) 972 { 973 bool high_speed_dev = sparx5_is_baser(conf->portmode); 974 int err, urgency, stop_wm; 975 976 err = sparx5_port_verify_speed(sparx5, port, conf); 977 if (err) 978 return err; 979 980 /* high speed device is already configured */ 981 if (!high_speed_dev) 982 sparx5_port_config_low_set(sparx5, port, conf); 983 984 /* Configure flow control */ 985 err = sparx5_port_fc_setup(sparx5, port, conf); 986 if (err) 987 return err; 988 989 /* Set the DSM stop watermark */ 990 stop_wm = sparx5_port_fifo_sz(sparx5, port->portno, conf->speed); 991 spx5_rmw(DSM_DEV_TX_STOP_WM_CFG_DEV_TX_STOP_WM_SET(stop_wm), 992 DSM_DEV_TX_STOP_WM_CFG_DEV_TX_STOP_WM, 993 sparx5, 994 DSM_DEV_TX_STOP_WM_CFG(port->portno)); 995 996 /* Enable port in queue system */ 997 urgency = sparx5_port_fwd_urg(sparx5, conf->speed); 998 spx5_rmw(QFWD_SWITCH_PORT_MODE_PORT_ENA_SET(1) | 999 QFWD_SWITCH_PORT_MODE_FWD_URGENCY_SET(urgency), 1000 QFWD_SWITCH_PORT_MODE_PORT_ENA | 1001 QFWD_SWITCH_PORT_MODE_FWD_URGENCY, 1002 sparx5, 1003 QFWD_SWITCH_PORT_MODE(port->portno)); 1004 1005 /* Save the new values */ 1006 port->conf = *conf; 1007 1008 return 0; 1009 } 1010 1011 /* Initialize port config to default */ 1012 int sparx5_port_init(struct sparx5 *sparx5, 1013 struct sparx5_port *port, 1014 struct sparx5_port_config *conf) 1015 { 1016 u32 pause_start = sparx5_wm_enc(6 * (ETH_MAXLEN / SPX5_BUFFER_CELL_SZ)); 1017 u32 atop = sparx5_wm_enc(20 * (ETH_MAXLEN / SPX5_BUFFER_CELL_SZ)); 1018 u32 devhigh = sparx5_to_high_dev(port->portno); 1019 u32 pix = sparx5_port_dev_index(port->portno); 1020 u32 pcs = sparx5_to_pcs_dev(port->portno); 1021 bool sd_pol = port->signd_active_high; 1022 bool sd_sel = !port->signd_internal; 1023 bool sd_ena = port->signd_enable; 1024 u32 pause_stop = 0xFFF - 1; /* FC generate disabled */ 1025 void __iomem *devinst; 1026 void __iomem *pcsinst; 1027 int err; 1028 1029 devinst = spx5_inst_get(sparx5, devhigh, pix); 1030 pcsinst = spx5_inst_get(sparx5, pcs, pix); 1031 1032 /* Set the mux port mode */ 1033 err = sparx5_port_mux_set(sparx5, port, conf); 1034 if (err) 1035 return err; 1036 1037 /* Configure MAC vlan awareness */ 1038 err = sparx5_port_max_tags_set(sparx5, port); 1039 if (err) 1040 return err; 1041 1042 /* Set Max Length */ 1043 spx5_rmw(DEV2G5_MAC_MAXLEN_CFG_MAX_LEN_SET(ETH_MAXLEN), 1044 DEV2G5_MAC_MAXLEN_CFG_MAX_LEN, 1045 sparx5, 1046 DEV2G5_MAC_MAXLEN_CFG(port->portno)); 1047 1048 /* 1G/2G5: Signal Detect configuration */ 1049 spx5_wr(DEV2G5_PCS1G_SD_CFG_SD_POL_SET(sd_pol) | 1050 DEV2G5_PCS1G_SD_CFG_SD_SEL_SET(sd_sel) | 1051 DEV2G5_PCS1G_SD_CFG_SD_ENA_SET(sd_ena), 1052 sparx5, 1053 DEV2G5_PCS1G_SD_CFG(port->portno)); 1054 1055 /* Set Pause WM hysteresis */ 1056 spx5_rmw(QSYS_PAUSE_CFG_PAUSE_START_SET(pause_start) | 1057 QSYS_PAUSE_CFG_PAUSE_STOP_SET(pause_stop) | 1058 QSYS_PAUSE_CFG_PAUSE_ENA_SET(1), 1059 QSYS_PAUSE_CFG_PAUSE_START | 1060 QSYS_PAUSE_CFG_PAUSE_STOP | 1061 QSYS_PAUSE_CFG_PAUSE_ENA, 1062 sparx5, 1063 QSYS_PAUSE_CFG(port->portno)); 1064 1065 /* Port ATOP. Frames are tail dropped when this WM is hit */ 1066 spx5_wr(QSYS_ATOP_ATOP_SET(atop), 1067 sparx5, 1068 QSYS_ATOP(port->portno)); 1069 1070 /* Discard pause frame 01-80-C2-00-00-01 */ 1071 spx5_wr(PAUSE_DISCARD, sparx5, ANA_CL_CAPTURE_BPDU_CFG(port->portno)); 1072 1073 if (conf->portmode == PHY_INTERFACE_MODE_QSGMII || 1074 conf->portmode == PHY_INTERFACE_MODE_SGMII) { 1075 err = sparx5_serdes_set(sparx5, port, conf); 1076 if (err) 1077 return err; 1078 1079 if (!sparx5_port_is_2g5(port->portno)) 1080 /* Enable shadow device */ 1081 spx5_rmw(DSM_DEV_TX_STOP_WM_CFG_DEV10G_SHADOW_ENA_SET(1), 1082 DSM_DEV_TX_STOP_WM_CFG_DEV10G_SHADOW_ENA, 1083 sparx5, 1084 DSM_DEV_TX_STOP_WM_CFG(port->portno)); 1085 1086 sparx5_dev_switch(sparx5, port->portno, false); 1087 } 1088 if (conf->portmode == PHY_INTERFACE_MODE_QSGMII) { 1089 // All ports must be PCS enabled in QSGMII mode 1090 spx5_rmw(DEV2G5_DEV_RST_CTRL_PCS_TX_RST_SET(0), 1091 DEV2G5_DEV_RST_CTRL_PCS_TX_RST, 1092 sparx5, 1093 DEV2G5_DEV_RST_CTRL(port->portno)); 1094 } 1095 /* Default IFGs for 1G */ 1096 spx5_wr(DEV2G5_MAC_IFG_CFG_TX_IFG_SET(6) | 1097 DEV2G5_MAC_IFG_CFG_RX_IFG1_SET(0) | 1098 DEV2G5_MAC_IFG_CFG_RX_IFG2_SET(0), 1099 sparx5, 1100 DEV2G5_MAC_IFG_CFG(port->portno)); 1101 1102 if (sparx5_port_is_2g5(port->portno)) 1103 return 0; /* Low speed device only - return */ 1104 1105 /* Now setup the high speed device */ 1106 if (conf->portmode == PHY_INTERFACE_MODE_NA) 1107 conf->portmode = PHY_INTERFACE_MODE_10GBASER; 1108 1109 if (sparx5_is_baser(conf->portmode)) 1110 sparx5_dev_switch(sparx5, port->portno, true); 1111 1112 /* Set Max Length */ 1113 spx5_inst_rmw(DEV10G_MAC_MAXLEN_CFG_MAX_LEN_SET(ETH_MAXLEN), 1114 DEV10G_MAC_MAXLEN_CFG_MAX_LEN, 1115 devinst, 1116 DEV10G_MAC_ENA_CFG(0)); 1117 1118 /* Handle Signal Detect in 10G PCS */ 1119 spx5_inst_wr(PCS10G_BR_PCS_SD_CFG_SD_POL_SET(sd_pol) | 1120 PCS10G_BR_PCS_SD_CFG_SD_SEL_SET(sd_sel) | 1121 PCS10G_BR_PCS_SD_CFG_SD_ENA_SET(sd_ena), 1122 pcsinst, 1123 PCS10G_BR_PCS_SD_CFG(0)); 1124 1125 if (sparx5_port_is_25g(port->portno)) { 1126 /* Handle Signal Detect in 25G PCS */ 1127 spx5_wr(DEV25G_PCS25G_SD_CFG_SD_POL_SET(sd_pol) | 1128 DEV25G_PCS25G_SD_CFG_SD_SEL_SET(sd_sel) | 1129 DEV25G_PCS25G_SD_CFG_SD_ENA_SET(sd_ena), 1130 sparx5, 1131 DEV25G_PCS25G_SD_CFG(pix)); 1132 } 1133 1134 return 0; 1135 } 1136 1137 void sparx5_port_enable(struct sparx5_port *port, bool enable) 1138 { 1139 struct sparx5 *sparx5 = port->sparx5; 1140 1141 /* Enable port for frame transfer? */ 1142 spx5_rmw(QFWD_SWITCH_PORT_MODE_PORT_ENA_SET(enable), 1143 QFWD_SWITCH_PORT_MODE_PORT_ENA, 1144 sparx5, 1145 QFWD_SWITCH_PORT_MODE(port->portno)); 1146 } 1147