1 // SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause 2 3 /* MDIO support for Mellanox Gigabit Ethernet driver 4 * 5 * Copyright (C) 2020-2021 NVIDIA CORPORATION & AFFILIATES 6 */ 7 8 #include <linux/acpi.h> 9 #include <linux/bitfield.h> 10 #include <linux/delay.h> 11 #include <linux/device.h> 12 #include <linux/err.h> 13 #include <linux/io.h> 14 #include <linux/iopoll.h> 15 #include <linux/ioport.h> 16 #include <linux/irqreturn.h> 17 #include <linux/jiffies.h> 18 #include <linux/module.h> 19 #include <linux/mod_devicetable.h> 20 #include <linux/phy.h> 21 #include <linux/platform_device.h> 22 #include <linux/property.h> 23 24 #include "mlxbf_gige.h" 25 #include "mlxbf_gige_regs.h" 26 27 #define MLXBF_GIGE_MDIO_GW_OFFSET 0x0 28 #define MLXBF_GIGE_MDIO_CFG_OFFSET 0x4 29 30 #define MLXBF_GIGE_MDIO_FREQ_REFERENCE 156250000ULL 31 #define MLXBF_GIGE_MDIO_COREPLL_CONST 16384ULL 32 #define MLXBF_GIGE_MDC_CLK_NS 400 33 #define MLXBF_GIGE_MDIO_PLL_I1CLK_REG1 0x4 34 #define MLXBF_GIGE_MDIO_PLL_I1CLK_REG2 0x8 35 #define MLXBF_GIGE_MDIO_CORE_F_SHIFT 0 36 #define MLXBF_GIGE_MDIO_CORE_F_MASK GENMASK(25, 0) 37 #define MLXBF_GIGE_MDIO_CORE_R_SHIFT 26 38 #define MLXBF_GIGE_MDIO_CORE_R_MASK GENMASK(31, 26) 39 #define MLXBF_GIGE_MDIO_CORE_OD_SHIFT 0 40 #define MLXBF_GIGE_MDIO_CORE_OD_MASK GENMASK(3, 0) 41 42 /* Support clause 22 */ 43 #define MLXBF_GIGE_MDIO_CL22_ST1 0x1 44 #define MLXBF_GIGE_MDIO_CL22_WRITE 0x1 45 #define MLXBF_GIGE_MDIO_CL22_READ 0x2 46 47 /* Busy bit is set by software and cleared by hardware */ 48 #define MLXBF_GIGE_MDIO_SET_BUSY 0x1 49 50 /* MDIO GW register bits */ 51 #define MLXBF_GIGE_MDIO_GW_AD_MASK GENMASK(15, 0) 52 #define MLXBF_GIGE_MDIO_GW_DEVAD_MASK GENMASK(20, 16) 53 #define MLXBF_GIGE_MDIO_GW_PARTAD_MASK GENMASK(25, 21) 54 #define MLXBF_GIGE_MDIO_GW_OPCODE_MASK GENMASK(27, 26) 55 #define MLXBF_GIGE_MDIO_GW_ST1_MASK GENMASK(28, 28) 56 #define MLXBF_GIGE_MDIO_GW_BUSY_MASK GENMASK(30, 30) 57 58 /* MDIO config register bits */ 59 #define MLXBF_GIGE_MDIO_CFG_MDIO_MODE_MASK GENMASK(1, 0) 60 #define MLXBF_GIGE_MDIO_CFG_MDIO3_3_MASK GENMASK(2, 2) 61 #define MLXBF_GIGE_MDIO_CFG_MDIO_FULL_DRIVE_MASK GENMASK(4, 4) 62 #define MLXBF_GIGE_MDIO_CFG_MDC_PERIOD_MASK GENMASK(15, 8) 63 #define MLXBF_GIGE_MDIO_CFG_MDIO_IN_SAMP_MASK GENMASK(23, 16) 64 #define MLXBF_GIGE_MDIO_CFG_MDIO_OUT_SAMP_MASK GENMASK(31, 24) 65 66 #define MLXBF_GIGE_MDIO_CFG_VAL (FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDIO_MODE_MASK, 1) | \ 67 FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDIO3_3_MASK, 1) | \ 68 FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDIO_FULL_DRIVE_MASK, 1) | \ 69 FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDIO_IN_SAMP_MASK, 6) | \ 70 FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDIO_OUT_SAMP_MASK, 13)) 71 72 #define MLXBF_GIGE_BF2_COREPLL_ADDR 0x02800c30 73 #define MLXBF_GIGE_BF2_COREPLL_SIZE 0x0000000c 74 75 static struct resource corepll_params[] = { 76 [MLXBF_GIGE_VERSION_BF2] = { 77 .start = MLXBF_GIGE_BF2_COREPLL_ADDR, 78 .end = MLXBF_GIGE_BF2_COREPLL_ADDR + MLXBF_GIGE_BF2_COREPLL_SIZE - 1, 79 .name = "COREPLL_RES" 80 }, 81 }; 82 83 /* Returns core clock i1clk in Hz */ 84 static u64 calculate_i1clk(struct mlxbf_gige *priv) 85 { 86 u8 core_od, core_r; 87 u64 freq_output; 88 u32 reg1, reg2; 89 u32 core_f; 90 91 reg1 = readl(priv->clk_io + MLXBF_GIGE_MDIO_PLL_I1CLK_REG1); 92 reg2 = readl(priv->clk_io + MLXBF_GIGE_MDIO_PLL_I1CLK_REG2); 93 94 core_f = (reg1 & MLXBF_GIGE_MDIO_CORE_F_MASK) >> 95 MLXBF_GIGE_MDIO_CORE_F_SHIFT; 96 core_r = (reg1 & MLXBF_GIGE_MDIO_CORE_R_MASK) >> 97 MLXBF_GIGE_MDIO_CORE_R_SHIFT; 98 core_od = (reg2 & MLXBF_GIGE_MDIO_CORE_OD_MASK) >> 99 MLXBF_GIGE_MDIO_CORE_OD_SHIFT; 100 101 /* Compute PLL output frequency as follow: 102 * 103 * CORE_F / 16384 104 * freq_output = freq_reference * ---------------------------- 105 * (CORE_R + 1) * (CORE_OD + 1) 106 */ 107 freq_output = div_u64((MLXBF_GIGE_MDIO_FREQ_REFERENCE * core_f), 108 MLXBF_GIGE_MDIO_COREPLL_CONST); 109 freq_output = div_u64(freq_output, (core_r + 1) * (core_od + 1)); 110 111 return freq_output; 112 } 113 114 /* Formula for encoding the MDIO period. The encoded value is 115 * passed to the MDIO config register. 116 * 117 * mdc_clk = 2*(val + 1)*(core clock in sec) 118 * 119 * i1clk is in Hz: 120 * 400 ns = 2*(val + 1)*(1/i1clk) 121 * 122 * val = (((400/10^9) / (1/i1clk) / 2) - 1) 123 * val = (400/2 * i1clk)/10^9 - 1 124 */ 125 static u8 mdio_period_map(struct mlxbf_gige *priv) 126 { 127 u8 mdio_period; 128 u64 i1clk; 129 130 i1clk = calculate_i1clk(priv); 131 132 mdio_period = div_u64((MLXBF_GIGE_MDC_CLK_NS >> 1) * i1clk, 1000000000) - 1; 133 134 return mdio_period; 135 } 136 137 static u32 mlxbf_gige_mdio_create_cmd(u16 data, int phy_add, 138 int phy_reg, u32 opcode) 139 { 140 u32 gw_reg = 0; 141 142 gw_reg |= FIELD_PREP(MLXBF_GIGE_MDIO_GW_AD_MASK, data); 143 gw_reg |= FIELD_PREP(MLXBF_GIGE_MDIO_GW_DEVAD_MASK, phy_reg); 144 gw_reg |= FIELD_PREP(MLXBF_GIGE_MDIO_GW_PARTAD_MASK, phy_add); 145 gw_reg |= FIELD_PREP(MLXBF_GIGE_MDIO_GW_OPCODE_MASK, opcode); 146 gw_reg |= FIELD_PREP(MLXBF_GIGE_MDIO_GW_ST1_MASK, 147 MLXBF_GIGE_MDIO_CL22_ST1); 148 gw_reg |= FIELD_PREP(MLXBF_GIGE_MDIO_GW_BUSY_MASK, 149 MLXBF_GIGE_MDIO_SET_BUSY); 150 151 return gw_reg; 152 } 153 154 static int mlxbf_gige_mdio_read(struct mii_bus *bus, int phy_add, int phy_reg) 155 { 156 struct mlxbf_gige *priv = bus->priv; 157 u32 cmd; 158 int ret; 159 u32 val; 160 161 if (phy_reg & MII_ADDR_C45) 162 return -EOPNOTSUPP; 163 164 /* Send mdio read request */ 165 cmd = mlxbf_gige_mdio_create_cmd(0, phy_add, phy_reg, MLXBF_GIGE_MDIO_CL22_READ); 166 167 writel(cmd, priv->mdio_io + MLXBF_GIGE_MDIO_GW_OFFSET); 168 169 ret = readl_poll_timeout_atomic(priv->mdio_io + MLXBF_GIGE_MDIO_GW_OFFSET, 170 val, !(val & MLXBF_GIGE_MDIO_GW_BUSY_MASK), 100, 1000000); 171 172 if (ret) { 173 writel(0, priv->mdio_io + MLXBF_GIGE_MDIO_GW_OFFSET); 174 return ret; 175 } 176 177 ret = readl(priv->mdio_io + MLXBF_GIGE_MDIO_GW_OFFSET); 178 /* Only return ad bits of the gw register */ 179 ret &= MLXBF_GIGE_MDIO_GW_AD_MASK; 180 181 return ret; 182 } 183 184 static int mlxbf_gige_mdio_write(struct mii_bus *bus, int phy_add, 185 int phy_reg, u16 val) 186 { 187 struct mlxbf_gige *priv = bus->priv; 188 u32 temp; 189 u32 cmd; 190 int ret; 191 192 if (phy_reg & MII_ADDR_C45) 193 return -EOPNOTSUPP; 194 195 /* Send mdio write request */ 196 cmd = mlxbf_gige_mdio_create_cmd(val, phy_add, phy_reg, 197 MLXBF_GIGE_MDIO_CL22_WRITE); 198 writel(cmd, priv->mdio_io + MLXBF_GIGE_MDIO_GW_OFFSET); 199 200 /* If the poll timed out, drop the request */ 201 ret = readl_poll_timeout_atomic(priv->mdio_io + MLXBF_GIGE_MDIO_GW_OFFSET, 202 temp, !(temp & MLXBF_GIGE_MDIO_GW_BUSY_MASK), 100, 1000000); 203 204 return ret; 205 } 206 207 static void mlxbf_gige_mdio_cfg(struct mlxbf_gige *priv) 208 { 209 u8 mdio_period; 210 u32 val; 211 212 mdio_period = mdio_period_map(priv); 213 214 val = MLXBF_GIGE_MDIO_CFG_VAL; 215 val |= FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDC_PERIOD_MASK, mdio_period); 216 writel(val, priv->mdio_io + MLXBF_GIGE_MDIO_CFG_OFFSET); 217 } 218 219 int mlxbf_gige_mdio_probe(struct platform_device *pdev, struct mlxbf_gige *priv) 220 { 221 struct device *dev = &pdev->dev; 222 struct resource *res; 223 int ret; 224 225 priv->mdio_io = devm_platform_ioremap_resource(pdev, MLXBF_GIGE_RES_MDIO9); 226 if (IS_ERR(priv->mdio_io)) 227 return PTR_ERR(priv->mdio_io); 228 229 /* clk resource shared with other drivers so cannot use 230 * devm_platform_ioremap_resource 231 */ 232 res = platform_get_resource(pdev, IORESOURCE_MEM, MLXBF_GIGE_RES_CLK); 233 if (!res) { 234 /* For backward compatibility with older ACPI tables, also keep 235 * CLK resource internal to the driver. 236 */ 237 res = &corepll_params[MLXBF_GIGE_VERSION_BF2]; 238 } 239 240 priv->clk_io = devm_ioremap(dev, res->start, resource_size(res)); 241 if (IS_ERR(priv->clk_io)) 242 return PTR_ERR(priv->clk_io); 243 244 mlxbf_gige_mdio_cfg(priv); 245 246 priv->mdiobus = devm_mdiobus_alloc(dev); 247 if (!priv->mdiobus) { 248 dev_err(dev, "Failed to alloc MDIO bus\n"); 249 return -ENOMEM; 250 } 251 252 priv->mdiobus->name = "mlxbf-mdio"; 253 priv->mdiobus->read = mlxbf_gige_mdio_read; 254 priv->mdiobus->write = mlxbf_gige_mdio_write; 255 priv->mdiobus->parent = dev; 256 priv->mdiobus->priv = priv; 257 snprintf(priv->mdiobus->id, MII_BUS_ID_SIZE, "%s", 258 dev_name(dev)); 259 260 ret = mdiobus_register(priv->mdiobus); 261 if (ret) 262 dev_err(dev, "Failed to register MDIO bus\n"); 263 264 return ret; 265 } 266 267 void mlxbf_gige_mdio_remove(struct mlxbf_gige *priv) 268 { 269 mdiobus_unregister(priv->mdiobus); 270 } 271