1 /*
2  * Copyright (c) 2007 Mellanox Technologies. All rights reserved.
3  *
4  * This software is available to you under a choice of one of two
5  * licenses.  You may choose to be licensed under the terms of the GNU
6  * General Public License (GPL) Version 2, available from the file
7  * COPYING in the main directory of this source tree, or the
8  * OpenIB.org BSD license below:
9  *
10  *     Redistribution and use in source and binary forms, with or
11  *     without modification, are permitted provided that the following
12  *     conditions are met:
13  *
14  *      - Redistributions of source code must retain the above
15  *        copyright notice, this list of conditions and the following
16  *        disclaimer.
17  *
18  *      - Redistributions in binary form must reproduce the above
19  *        copyright notice, this list of conditions and the following
20  *        disclaimer in the documentation and/or other materials
21  *        provided with the distribution.
22  *
23  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
24  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
25  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
26  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
27  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
28  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
29  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
30  * SOFTWARE.
31  *
32  */
33 
34 #include <linux/cpumask.h>
35 #include <linux/module.h>
36 #include <linux/delay.h>
37 #include <linux/netdevice.h>
38 #include <linux/slab.h>
39 
40 #include <linux/mlx4/driver.h>
41 #include <linux/mlx4/device.h>
42 #include <linux/mlx4/cmd.h>
43 
44 #include "mlx4_en.h"
45 
46 MODULE_AUTHOR("Liran Liss, Yevgeny Petrilin");
47 MODULE_DESCRIPTION("Mellanox ConnectX HCA Ethernet driver");
48 MODULE_LICENSE("Dual BSD/GPL");
49 MODULE_VERSION(DRV_VERSION " ("DRV_RELDATE")");
50 
51 static const char mlx4_en_version[] =
52 	DRV_NAME ": Mellanox ConnectX HCA Ethernet driver v"
53 	DRV_VERSION " (" DRV_RELDATE ")\n";
54 
55 #define MLX4_EN_PARM_INT(X, def_val, desc) \
56 	static unsigned int X = def_val;\
57 	module_param(X , uint, 0444); \
58 	MODULE_PARM_DESC(X, desc);
59 
60 
61 /*
62  * Device scope module parameters
63  */
64 
65 /* Enable RSS UDP traffic */
66 MLX4_EN_PARM_INT(udp_rss, 1,
67 		 "Enable RSS for incomming UDP traffic or disabled (0)");
68 
69 /* Priority pausing */
70 MLX4_EN_PARM_INT(pfctx, 0, "Priority based Flow Control policy on TX[7:0]."
71 			   " Per priority bit mask");
72 MLX4_EN_PARM_INT(pfcrx, 0, "Priority based Flow Control policy on RX[7:0]."
73 			   " Per priority bit mask");
74 
75 int en_print(const char *level, const struct mlx4_en_priv *priv,
76 	     const char *format, ...)
77 {
78 	va_list args;
79 	struct va_format vaf;
80 	int i;
81 
82 	va_start(args, format);
83 
84 	vaf.fmt = format;
85 	vaf.va = &args;
86 	if (priv->registered)
87 		i = printk("%s%s: %s: %pV",
88 			   level, DRV_NAME, priv->dev->name, &vaf);
89 	else
90 		i = printk("%s%s: %s: Port %d: %pV",
91 			   level, DRV_NAME, dev_name(&priv->mdev->pdev->dev),
92 			   priv->port, &vaf);
93 	va_end(args);
94 
95 	return i;
96 }
97 
98 static int mlx4_en_get_profile(struct mlx4_en_dev *mdev)
99 {
100 	struct mlx4_en_profile *params = &mdev->profile;
101 	int i;
102 
103 	params->udp_rss = udp_rss;
104 	if (params->udp_rss && !(mdev->dev->caps.flags
105 					& MLX4_DEV_CAP_FLAG_UDP_RSS)) {
106 		mlx4_warn(mdev, "UDP RSS is not supported on this device.\n");
107 		params->udp_rss = 0;
108 	}
109 	for (i = 1; i <= MLX4_MAX_PORTS; i++) {
110 		params->prof[i].rx_pause = 1;
111 		params->prof[i].rx_ppp = pfcrx;
112 		params->prof[i].tx_pause = 1;
113 		params->prof[i].tx_ppp = pfctx;
114 		params->prof[i].tx_ring_size = MLX4_EN_DEF_TX_RING_SIZE;
115 		params->prof[i].rx_ring_size = MLX4_EN_DEF_RX_RING_SIZE;
116 		params->prof[i].tx_ring_num = MLX4_EN_NUM_TX_RINGS +
117 			(!!pfcrx) * MLX4_EN_NUM_PPP_RINGS;
118 		params->prof[i].rss_rings = 0;
119 	}
120 
121 	return 0;
122 }
123 
124 static void *mlx4_en_get_netdev(struct mlx4_dev *dev, void *ctx, u8 port)
125 {
126 	struct mlx4_en_dev *endev = ctx;
127 
128 	return endev->pndev[port];
129 }
130 
131 static void mlx4_en_event(struct mlx4_dev *dev, void *endev_ptr,
132 			  enum mlx4_dev_event event, int port)
133 {
134 	struct mlx4_en_dev *mdev = (struct mlx4_en_dev *) endev_ptr;
135 	struct mlx4_en_priv *priv;
136 
137 	if (!mdev->pndev[port])
138 		return;
139 
140 	priv = netdev_priv(mdev->pndev[port]);
141 	switch (event) {
142 	case MLX4_DEV_EVENT_PORT_UP:
143 	case MLX4_DEV_EVENT_PORT_DOWN:
144 		/* To prevent races, we poll the link state in a separate
145 		  task rather than changing it here */
146 		priv->link_state = event;
147 		queue_work(mdev->workqueue, &priv->linkstate_task);
148 		break;
149 
150 	case MLX4_DEV_EVENT_CATASTROPHIC_ERROR:
151 		mlx4_err(mdev, "Internal error detected, restarting device\n");
152 		break;
153 
154 	default:
155 		mlx4_warn(mdev, "Unhandled event: %d\n", event);
156 	}
157 }
158 
159 static void mlx4_en_remove(struct mlx4_dev *dev, void *endev_ptr)
160 {
161 	struct mlx4_en_dev *mdev = endev_ptr;
162 	int i;
163 
164 	mutex_lock(&mdev->state_lock);
165 	mdev->device_up = false;
166 	mutex_unlock(&mdev->state_lock);
167 
168 	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH)
169 		if (mdev->pndev[i])
170 			mlx4_en_destroy_netdev(mdev->pndev[i]);
171 
172 	flush_workqueue(mdev->workqueue);
173 	destroy_workqueue(mdev->workqueue);
174 	mlx4_mr_free(dev, &mdev->mr);
175 	iounmap(mdev->uar_map);
176 	mlx4_uar_free(dev, &mdev->priv_uar);
177 	mlx4_pd_free(dev, mdev->priv_pdn);
178 	kfree(mdev);
179 }
180 
181 static void *mlx4_en_add(struct mlx4_dev *dev)
182 {
183 	struct mlx4_en_dev *mdev;
184 	int i;
185 	int err;
186 
187 	printk_once(KERN_INFO "%s", mlx4_en_version);
188 
189 	mdev = kzalloc(sizeof *mdev, GFP_KERNEL);
190 	if (!mdev) {
191 		dev_err(&dev->pdev->dev, "Device struct alloc failed, "
192 			"aborting.\n");
193 		err = -ENOMEM;
194 		goto err_free_res;
195 	}
196 
197 	if (mlx4_pd_alloc(dev, &mdev->priv_pdn))
198 		goto err_free_dev;
199 
200 	if (mlx4_uar_alloc(dev, &mdev->priv_uar))
201 		goto err_pd;
202 
203 	mdev->uar_map = ioremap((phys_addr_t) mdev->priv_uar.pfn << PAGE_SHIFT,
204 				PAGE_SIZE);
205 	if (!mdev->uar_map)
206 		goto err_uar;
207 	spin_lock_init(&mdev->uar_lock);
208 
209 	mdev->dev = dev;
210 	mdev->dma_device = &(dev->pdev->dev);
211 	mdev->pdev = dev->pdev;
212 	mdev->device_up = false;
213 
214 	mdev->LSO_support = !!(dev->caps.flags & (1 << 15));
215 	if (!mdev->LSO_support)
216 		mlx4_warn(mdev, "LSO not supported, please upgrade to later "
217 				"FW version to enable LSO\n");
218 
219 	if (mlx4_mr_alloc(mdev->dev, mdev->priv_pdn, 0, ~0ull,
220 			 MLX4_PERM_LOCAL_WRITE |  MLX4_PERM_LOCAL_READ,
221 			 0, 0, &mdev->mr)) {
222 		mlx4_err(mdev, "Failed allocating memory region\n");
223 		goto err_map;
224 	}
225 	if (mlx4_mr_enable(mdev->dev, &mdev->mr)) {
226 		mlx4_err(mdev, "Failed enabling memory region\n");
227 		goto err_mr;
228 	}
229 
230 	/* Build device profile according to supplied module parameters */
231 	err = mlx4_en_get_profile(mdev);
232 	if (err) {
233 		mlx4_err(mdev, "Bad module parameters, aborting.\n");
234 		goto err_mr;
235 	}
236 
237 	/* Configure which ports to start according to module parameters */
238 	mdev->port_cnt = 0;
239 	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH)
240 		mdev->port_cnt++;
241 
242 	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) {
243 		if (!dev->caps.comp_pool) {
244 			mdev->profile.prof[i].rx_ring_num =
245 				rounddown_pow_of_two(max_t(int, MIN_RX_RINGS,
246 							   min_t(int,
247 								 dev->caps.num_comp_vectors,
248 								 MAX_RX_RINGS)));
249 		} else {
250 			mdev->profile.prof[i].rx_ring_num = rounddown_pow_of_two(
251 				min_t(int, dev->caps.comp_pool/
252 				      dev->caps.num_ports - 1 , MAX_MSIX_P_PORT - 1));
253 		}
254 	}
255 
256 	/* Create our own workqueue for reset/multicast tasks
257 	 * Note: we cannot use the shared workqueue because of deadlocks caused
258 	 *       by the rtnl lock */
259 	mdev->workqueue = create_singlethread_workqueue("mlx4_en");
260 	if (!mdev->workqueue) {
261 		err = -ENOMEM;
262 		goto err_mr;
263 	}
264 
265 	/* At this stage all non-port specific tasks are complete:
266 	 * mark the card state as up */
267 	mutex_init(&mdev->state_lock);
268 	mdev->device_up = true;
269 
270 	/* Setup ports */
271 
272 	/* Create a netdev for each port */
273 	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) {
274 		mlx4_info(mdev, "Activating port:%d\n", i);
275 		if (mlx4_en_init_netdev(mdev, i, &mdev->profile.prof[i]))
276 			mdev->pndev[i] = NULL;
277 	}
278 	return mdev;
279 
280 err_mr:
281 	mlx4_mr_free(dev, &mdev->mr);
282 err_map:
283 	if (!mdev->uar_map)
284 		iounmap(mdev->uar_map);
285 err_uar:
286 	mlx4_uar_free(dev, &mdev->priv_uar);
287 err_pd:
288 	mlx4_pd_free(dev, mdev->priv_pdn);
289 err_free_dev:
290 	kfree(mdev);
291 err_free_res:
292 	return NULL;
293 }
294 
295 static struct mlx4_interface mlx4_en_interface = {
296 	.add		= mlx4_en_add,
297 	.remove		= mlx4_en_remove,
298 	.event		= mlx4_en_event,
299 	.get_dev	= mlx4_en_get_netdev,
300 	.protocol	= MLX4_PROT_ETH,
301 };
302 
303 static int __init mlx4_en_init(void)
304 {
305 	return mlx4_register_interface(&mlx4_en_interface);
306 }
307 
308 static void __exit mlx4_en_cleanup(void)
309 {
310 	mlx4_unregister_interface(&mlx4_en_interface);
311 }
312 
313 module_init(mlx4_en_init);
314 module_exit(mlx4_en_cleanup);
315 
316