1#
2# Marvell device configuration
3#
4
5config NET_VENDOR_MARVELL
6	bool "Marvell devices"
7	default y
8	depends on PCI || CPU_PXA168 || MV64X60 || PPC32 || PLAT_ORION || INET
9	---help---
10	  If you have a network (Ethernet) card belonging to this class, say Y
11	  and read the Ethernet-HOWTO, available from
12	  <http://www.tldp.org/docs.html#howto>.
13
14	  Note that the answer to this question doesn't directly affect the
15	  kernel: saying N will just cause the configurator to skip all
16	  the questions about Marvell devices. If you say Y, you will be
17	  asked for your specific card in the following questions.
18
19if NET_VENDOR_MARVELL
20
21config MV643XX_ETH
22	tristate "Marvell Discovery (643XX) and Orion ethernet support"
23	depends on (MV64X60 || PPC32 || PLAT_ORION) && INET
24	select PHYLIB
25	select MVMDIO
26	---help---
27	  This driver supports the gigabit ethernet MACs in the
28	  Marvell Discovery PPC/MIPS chipset family (MV643XX) and
29	  in the Marvell Orion ARM SoC family.
30
31	  Some boards that use the Discovery chipset are the Momenco
32	  Ocelot C and Jaguar ATX and Pegasos II.
33
34config MVMDIO
35	tristate "Marvell MDIO interface support"
36	select PHYLIB
37	---help---
38	  This driver supports the MDIO interface found in the network
39	  interface units of the Marvell EBU SoCs (Kirkwood, Orion5x,
40	  Dove, Armada 370 and Armada XP).
41
42	  This driver is used by the MV643XX_ETH and MVNETA drivers.
43
44config MVNETA
45	tristate "Marvell Armada 370/XP network interface support"
46	depends on MACH_ARMADA_370_XP
47	select MVMDIO
48	---help---
49	  This driver supports the network interface units in the
50	  Marvell ARMADA XP and ARMADA 370 SoC family.
51
52	  Note that this driver is distinct from the mv643xx_eth
53	  driver, which should be used for the older Marvell SoCs
54	  (Dove, Orion, Discovery, Kirkwood).
55
56config PXA168_ETH
57	tristate "Marvell pxa168 ethernet support"
58	depends on CPU_PXA168
59	select PHYLIB
60	---help---
61	  This driver supports the pxa168 Ethernet ports.
62
63	  To compile this driver as a module, choose M here. The module
64	  will be called pxa168_eth.
65
66config SKGE
67	tristate "Marvell Yukon Gigabit Ethernet support"
68	depends on PCI
69	select CRC32
70	---help---
71	  This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
72	  and related Gigabit Ethernet adapters. It is a new smaller driver
73	  with better performance and more complete ethtool support.
74
75	  It does not support the link failover and network management
76	  features that "portable" vendor supplied sk98lin driver does.
77
78	  This driver supports adapters based on the original Yukon chipset:
79	  Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
80	  Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
81
82	  It does not support the newer Yukon2 chipset: a separate driver,
83	  sky2, is provided for these adapters.
84
85	  To compile this driver as a module, choose M here: the module
86	  will be called skge.  This is recommended.
87
88config SKGE_DEBUG
89	bool "Debugging interface"
90	depends on SKGE && DEBUG_FS
91	---help---
92	  This option adds the ability to dump driver state for debugging.
93	  The file /sys/kernel/debug/skge/ethX displays the state of the internal
94	  transmit and receive rings.
95
96	  If unsure, say N.
97
98config SKGE_GENESIS
99	bool "Support for older SysKonnect Genesis boards"
100	depends on SKGE
101	---help---
102	 This enables support for the older and uncommon SysKonnect Genesis
103	 chips, which support MII via an external transceiver, instead of
104	 an internal one. Disabling this option will save some memory
105	 by making code smaller. If unsure say Y.
106
107config SKY2
108	tristate "Marvell Yukon 2 support"
109	depends on PCI
110	select CRC32
111	---help---
112	  This driver supports Gigabit Ethernet adapters based on the
113	  Marvell Yukon 2 chipset:
114	  Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
115	  88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
116
117	  There is companion driver for the older Marvell Yukon and
118	  SysKonnect Genesis based adapters: skge.
119
120	  To compile this driver as a module, choose M here: the module
121	  will be called sky2.  This is recommended.
122
123config SKY2_DEBUG
124	bool "Debugging interface"
125	depends on SKY2 && DEBUG_FS
126	---help---
127	  This option adds the ability to dump driver state for debugging.
128	  The file /sys/kernel/debug/sky2/ethX displays the state of the internal
129	  transmit and receive rings.
130
131	  If unsure, say N.
132
133endif # NET_VENDOR_MARVELL
134