1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Marvell device configuration
4#
5
6config NET_VENDOR_MARVELL
7	bool "Marvell devices"
8	default y
9	depends on PCI || CPU_PXA168 || MV64X60 || PPC32 || PLAT_ORION || INET || COMPILE_TEST
10	help
11	  If you have a network (Ethernet) card belonging to this class, say Y.
12
13	  Note that the answer to this question doesn't directly affect the
14	  kernel: saying N will just cause the configurator to skip all
15	  the questions about Marvell devices. If you say Y, you will be
16	  asked for your specific card in the following questions.
17
18if NET_VENDOR_MARVELL
19
20config MV643XX_ETH
21	tristate "Marvell Discovery (643XX) and Orion ethernet support"
22	depends on MV64X60 || PPC32 || PLAT_ORION || COMPILE_TEST
23	depends on INET
24	select PHYLIB
25	select MVMDIO
26	help
27	  This driver supports the gigabit ethernet MACs in the
28	  Marvell Discovery PPC/MIPS chipset family (MV643XX) and
29	  in the Marvell Orion ARM SoC family.
30
31	  Some boards that use the Discovery chipset are the Momenco
32	  Ocelot C and Jaguar ATX and Pegasos II.
33
34config MVMDIO
35	tristate "Marvell MDIO interface support"
36	depends on HAS_IOMEM
37	select PHYLIB
38	help
39	  This driver supports the MDIO interface found in the network
40	  interface units of the Marvell EBU SoCs (Kirkwood, Orion5x,
41	  Dove, Armada 370 and Armada XP).
42
43	  This driver is used by the MV643XX_ETH and MVNETA drivers.
44
45config MVNETA_BM_ENABLE
46	tristate "Marvell Armada 38x/XP network interface BM support"
47	depends on MVNETA
48	depends on !64BIT
49	help
50	  This driver supports auxiliary block of the network
51	  interface units in the Marvell ARMADA XP and ARMADA 38x SoC
52	  family, which is called buffer manager.
53
54	  This driver, when enabled, strictly cooperates with mvneta
55	  driver and is common for all network ports of the devices,
56	  even for Armada 370 SoC, which doesn't support hardware
57	  buffer management.
58
59config MVNETA
60	tristate "Marvell Armada 370/38x/XP/37xx network interface support"
61	depends on ARCH_MVEBU || COMPILE_TEST
62	select MVMDIO
63	select PHYLINK
64	select PAGE_POOL
65	help
66	  This driver supports the network interface units in the
67	  Marvell ARMADA XP, ARMADA 370, ARMADA 38x and
68	  ARMADA 37xx SoC family.
69
70	  Note that this driver is distinct from the mv643xx_eth
71	  driver, which should be used for the older Marvell SoCs
72	  (Dove, Orion, Discovery, Kirkwood).
73
74config MVNETA_BM
75	tristate
76	depends on !64BIT
77	default y if MVNETA=y && MVNETA_BM_ENABLE!=n
78	default MVNETA_BM_ENABLE
79	select HWBM
80	select GENERIC_ALLOCATOR
81	help
82	  MVNETA_BM must not be 'm' if MVNETA=y, so this symbol ensures
83	  that all dependencies are met.
84
85config MVPP2
86	tristate "Marvell Armada 375/7K/8K network interface support"
87	depends on ARCH_MVEBU || COMPILE_TEST
88	select MVMDIO
89	select PHYLINK
90	select PAGE_POOL
91	help
92	  This driver supports the network interface units in the
93	  Marvell ARMADA 375, 7K and 8K SoCs.
94
95config MVPP2_PTP
96	bool "Marvell Armada 8K Enable PTP support"
97	depends on (PTP_1588_CLOCK = y && MVPP2 = y) || \
98		   (PTP_1588_CLOCK && MVPP2 = m)
99
100config PXA168_ETH
101	tristate "Marvell pxa168 ethernet support"
102	depends on HAS_IOMEM
103	depends on CPU_PXA168 || ARCH_BERLIN || COMPILE_TEST
104	select PHYLIB
105	help
106	  This driver supports the pxa168 Ethernet ports.
107
108	  To compile this driver as a module, choose M here. The module
109	  will be called pxa168_eth.
110
111config SKGE
112	tristate "Marvell Yukon Gigabit Ethernet support"
113	depends on PCI
114	select CRC32
115	help
116	  This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
117	  and related Gigabit Ethernet adapters. It is a new smaller driver
118	  with better performance and more complete ethtool support.
119
120	  It does not support the link failover and network management
121	  features that "portable" vendor supplied sk98lin driver does.
122
123	  This driver supports adapters based on the original Yukon chipset:
124	  Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
125	  Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
126
127	  It does not support the newer Yukon2 chipset: a separate driver,
128	  sky2, is provided for these adapters.
129
130	  To compile this driver as a module, choose M here: the module
131	  will be called skge.  This is recommended.
132
133config SKGE_DEBUG
134	bool "Debugging interface"
135	depends on SKGE && DEBUG_FS
136	help
137	  This option adds the ability to dump driver state for debugging.
138	  The file /sys/kernel/debug/skge/ethX displays the state of the internal
139	  transmit and receive rings.
140
141	  If unsure, say N.
142
143config SKGE_GENESIS
144	bool "Support for older SysKonnect Genesis boards"
145	depends on SKGE
146	help
147	 This enables support for the older and uncommon SysKonnect Genesis
148	 chips, which support MII via an external transceiver, instead of
149	 an internal one. Disabling this option will save some memory
150	 by making code smaller. If unsure say Y.
151
152config SKY2
153	tristate "Marvell Yukon 2 support"
154	depends on PCI
155	select CRC32
156	help
157	  This driver supports Gigabit Ethernet adapters based on the
158	  Marvell Yukon 2 chipset:
159	  Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
160	  88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
161
162	  There is companion driver for the older Marvell Yukon and
163	  SysKonnect Genesis based adapters: skge.
164
165	  To compile this driver as a module, choose M here: the module
166	  will be called sky2.  This is recommended.
167
168config SKY2_DEBUG
169	bool "Debugging interface"
170	depends on SKY2 && DEBUG_FS
171	help
172	  This option adds the ability to dump driver state for debugging.
173	  The file /sys/kernel/debug/sky2/ethX displays the state of the internal
174	  transmit and receive rings.
175
176	  If unsure, say N.
177
178
179source "drivers/net/ethernet/marvell/octeontx2/Kconfig"
180source "drivers/net/ethernet/marvell/prestera/Kconfig"
181
182endif # NET_VENDOR_MARVELL
183