1# 2# Marvell device configuration 3# 4 5config NET_VENDOR_MARVELL 6 bool "Marvell devices" 7 default y 8 depends on PCI || CPU_PXA168 || MV64X60 || PPC32 || PLAT_ORION || INET || COMPILE_TEST 9 ---help--- 10 If you have a network (Ethernet) card belonging to this class, say Y. 11 12 Note that the answer to this question doesn't directly affect the 13 kernel: saying N will just cause the configurator to skip all 14 the questions about Marvell devices. If you say Y, you will be 15 asked for your specific card in the following questions. 16 17if NET_VENDOR_MARVELL 18 19config MV643XX_ETH 20 tristate "Marvell Discovery (643XX) and Orion ethernet support" 21 depends on (MV64X60 || PPC32 || PLAT_ORION || COMPILE_TEST) && INET 22 depends on HAS_DMA 23 select PHYLIB 24 select MVMDIO 25 ---help--- 26 This driver supports the gigabit ethernet MACs in the 27 Marvell Discovery PPC/MIPS chipset family (MV643XX) and 28 in the Marvell Orion ARM SoC family. 29 30 Some boards that use the Discovery chipset are the Momenco 31 Ocelot C and Jaguar ATX and Pegasos II. 32 33config MVMDIO 34 tristate "Marvell MDIO interface support" 35 depends on HAS_IOMEM 36 select PHYLIB 37 ---help--- 38 This driver supports the MDIO interface found in the network 39 interface units of the Marvell EBU SoCs (Kirkwood, Orion5x, 40 Dove, Armada 370 and Armada XP). 41 42 This driver is used by the MV643XX_ETH and MVNETA drivers. 43 44config MVNETA_BM_ENABLE 45 tristate "Marvell Armada 38x/XP network interface BM support" 46 depends on MVNETA 47 depends on !64BIT 48 ---help--- 49 This driver supports auxiliary block of the network 50 interface units in the Marvell ARMADA XP and ARMADA 38x SoC 51 family, which is called buffer manager. 52 53 This driver, when enabled, strictly cooperates with mvneta 54 driver and is common for all network ports of the devices, 55 even for Armada 370 SoC, which doesn't support hardware 56 buffer management. 57 58config MVNETA 59 tristate "Marvell Armada 370/38x/XP/37xx network interface support" 60 depends on ARCH_MVEBU || COMPILE_TEST 61 depends on HAS_DMA 62 select MVMDIO 63 select FIXED_PHY 64 ---help--- 65 This driver supports the network interface units in the 66 Marvell ARMADA XP, ARMADA 370, ARMADA 38x and 67 ARMADA 37xx SoC family. 68 69 Note that this driver is distinct from the mv643xx_eth 70 driver, which should be used for the older Marvell SoCs 71 (Dove, Orion, Discovery, Kirkwood). 72 73config MVNETA_BM 74 tristate 75 depends on !64BIT 76 default y if MVNETA=y && MVNETA_BM_ENABLE!=n 77 default MVNETA_BM_ENABLE 78 select HWBM 79 select GENERIC_ALLOCATOR 80 help 81 MVNETA_BM must not be 'm' if MVNETA=y, so this symbol ensures 82 that all dependencies are met. 83 84config MVPP2 85 tristate "Marvell Armada 375 network interface support" 86 depends on ARCH_MVEBU || COMPILE_TEST 87 depends on HAS_DMA 88 select MVMDIO 89 ---help--- 90 This driver supports the network interface units in the 91 Marvell ARMADA 375 SoC. 92 93config PXA168_ETH 94 tristate "Marvell pxa168 ethernet support" 95 depends on HAS_IOMEM && HAS_DMA 96 depends on CPU_PXA168 || ARCH_BERLIN || COMPILE_TEST 97 select PHYLIB 98 ---help--- 99 This driver supports the pxa168 Ethernet ports. 100 101 To compile this driver as a module, choose M here. The module 102 will be called pxa168_eth. 103 104config SKGE 105 tristate "Marvell Yukon Gigabit Ethernet support" 106 depends on PCI 107 select CRC32 108 ---help--- 109 This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx 110 and related Gigabit Ethernet adapters. It is a new smaller driver 111 with better performance and more complete ethtool support. 112 113 It does not support the link failover and network management 114 features that "portable" vendor supplied sk98lin driver does. 115 116 This driver supports adapters based on the original Yukon chipset: 117 Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T, 118 Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872. 119 120 It does not support the newer Yukon2 chipset: a separate driver, 121 sky2, is provided for these adapters. 122 123 To compile this driver as a module, choose M here: the module 124 will be called skge. This is recommended. 125 126config SKGE_DEBUG 127 bool "Debugging interface" 128 depends on SKGE && DEBUG_FS 129 ---help--- 130 This option adds the ability to dump driver state for debugging. 131 The file /sys/kernel/debug/skge/ethX displays the state of the internal 132 transmit and receive rings. 133 134 If unsure, say N. 135 136config SKGE_GENESIS 137 bool "Support for older SysKonnect Genesis boards" 138 depends on SKGE 139 ---help--- 140 This enables support for the older and uncommon SysKonnect Genesis 141 chips, which support MII via an external transceiver, instead of 142 an internal one. Disabling this option will save some memory 143 by making code smaller. If unsure say Y. 144 145config SKY2 146 tristate "Marvell Yukon 2 support" 147 depends on PCI 148 select CRC32 149 ---help--- 150 This driver supports Gigabit Ethernet adapters based on the 151 Marvell Yukon 2 chipset: 152 Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/ 153 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21 154 155 There is companion driver for the older Marvell Yukon and 156 SysKonnect Genesis based adapters: skge. 157 158 To compile this driver as a module, choose M here: the module 159 will be called sky2. This is recommended. 160 161config SKY2_DEBUG 162 bool "Debugging interface" 163 depends on SKY2 && DEBUG_FS 164 ---help--- 165 This option adds the ability to dump driver state for debugging. 166 The file /sys/kernel/debug/sky2/ethX displays the state of the internal 167 transmit and receive rings. 168 169 If unsure, say N. 170 171endif # NET_VENDOR_MARVELL 172