1# 2# Marvell device configuration 3# 4 5config NET_VENDOR_MARVELL 6 bool "Marvell devices" 7 default y 8 depends on PCI || CPU_PXA168 || MV64X60 || PPC32 || PLAT_ORION || INET 9 ---help--- 10 If you have a network (Ethernet) card belonging to this class, say Y 11 and read the Ethernet-HOWTO, available from 12 <http://www.tldp.org/docs.html#howto>. 13 14 Note that the answer to this question doesn't directly affect the 15 kernel: saying N will just cause the configurator to skip all 16 the questions about Marvell devices. If you say Y, you will be 17 asked for your specific card in the following questions. 18 19if NET_VENDOR_MARVELL 20 21config MV643XX_ETH 22 tristate "Marvell Discovery (643XX) and Orion ethernet support" 23 depends on (MV64X60 || PPC32 || PLAT_ORION) && INET 24 select PHYLIB 25 select MVMDIO 26 ---help--- 27 This driver supports the gigabit ethernet MACs in the 28 Marvell Discovery PPC/MIPS chipset family (MV643XX) and 29 in the Marvell Orion ARM SoC family. 30 31 Some boards that use the Discovery chipset are the Momenco 32 Ocelot C and Jaguar ATX and Pegasos II. 33 34config MVMDIO 35 tristate "Marvell MDIO interface support" 36 depends on HAS_IOMEM 37 select PHYLIB 38 ---help--- 39 This driver supports the MDIO interface found in the network 40 interface units of the Marvell EBU SoCs (Kirkwood, Orion5x, 41 Dove, Armada 370 and Armada XP). 42 43 This driver is used by the MV643XX_ETH and MVNETA drivers. 44 45config MVNETA 46 tristate "Marvell Armada 370/38x/XP network interface support" 47 depends on PLAT_ORION 48 select MVMDIO 49 ---help--- 50 This driver supports the network interface units in the 51 Marvell ARMADA XP, ARMADA 370 and ARMADA 38x SoC family. 52 53 Note that this driver is distinct from the mv643xx_eth 54 driver, which should be used for the older Marvell SoCs 55 (Dove, Orion, Discovery, Kirkwood). 56 57config PXA168_ETH 58 tristate "Marvell pxa168 ethernet support" 59 depends on CPU_PXA168 60 select PHYLIB 61 ---help--- 62 This driver supports the pxa168 Ethernet ports. 63 64 To compile this driver as a module, choose M here. The module 65 will be called pxa168_eth. 66 67config SKGE 68 tristate "Marvell Yukon Gigabit Ethernet support" 69 depends on PCI 70 select CRC32 71 ---help--- 72 This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx 73 and related Gigabit Ethernet adapters. It is a new smaller driver 74 with better performance and more complete ethtool support. 75 76 It does not support the link failover and network management 77 features that "portable" vendor supplied sk98lin driver does. 78 79 This driver supports adapters based on the original Yukon chipset: 80 Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T, 81 Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872. 82 83 It does not support the newer Yukon2 chipset: a separate driver, 84 sky2, is provided for these adapters. 85 86 To compile this driver as a module, choose M here: the module 87 will be called skge. This is recommended. 88 89config SKGE_DEBUG 90 bool "Debugging interface" 91 depends on SKGE && DEBUG_FS 92 ---help--- 93 This option adds the ability to dump driver state for debugging. 94 The file /sys/kernel/debug/skge/ethX displays the state of the internal 95 transmit and receive rings. 96 97 If unsure, say N. 98 99config SKGE_GENESIS 100 bool "Support for older SysKonnect Genesis boards" 101 depends on SKGE 102 ---help--- 103 This enables support for the older and uncommon SysKonnect Genesis 104 chips, which support MII via an external transceiver, instead of 105 an internal one. Disabling this option will save some memory 106 by making code smaller. If unsure say Y. 107 108config SKY2 109 tristate "Marvell Yukon 2 support" 110 depends on PCI 111 select CRC32 112 ---help--- 113 This driver supports Gigabit Ethernet adapters based on the 114 Marvell Yukon 2 chipset: 115 Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/ 116 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21 117 118 There is companion driver for the older Marvell Yukon and 119 SysKonnect Genesis based adapters: skge. 120 121 To compile this driver as a module, choose M here: the module 122 will be called sky2. This is recommended. 123 124config SKY2_DEBUG 125 bool "Debugging interface" 126 depends on SKY2 && DEBUG_FS 127 ---help--- 128 This option adds the ability to dump driver state for debugging. 129 The file /sys/kernel/debug/sky2/ethX displays the state of the internal 130 transmit and receive rings. 131 132 If unsure, say N. 133 134endif # NET_VENDOR_MARVELL 135