1#
2# Marvell device configuration
3#
4
5config NET_VENDOR_MARVELL
6	bool "Marvell devices"
7	default y
8	depends on PCI || CPU_PXA168 || MV64X60 || PPC32 || PLAT_ORION || INET
9	---help---
10	  If you have a network (Ethernet) card belonging to this class, say Y
11	  and read the Ethernet-HOWTO, available from
12	  <http://www.tldp.org/docs.html#howto>.
13
14	  Note that the answer to this question doesn't directly affect the
15	  kernel: saying N will just cause the configurator to skip all
16	  the questions about Marvell devices. If you say Y, you will be
17	  asked for your specific card in the following questions.
18
19if NET_VENDOR_MARVELL
20
21config MV643XX_ETH
22	tristate "Marvell Discovery (643XX) and Orion ethernet support"
23	depends on (MV64X60 || PPC32 || PLAT_ORION) && INET
24	select INET_LRO
25	select PHYLIB
26	---help---
27	  This driver supports the gigabit ethernet MACs in the
28	  Marvell Discovery PPC/MIPS chipset family (MV643XX) and
29	  in the Marvell Orion ARM SoC family.
30
31	  Some boards that use the Discovery chipset are the Momenco
32	  Ocelot C and Jaguar ATX and Pegasos II.
33
34config PXA168_ETH
35	tristate "Marvell pxa168 ethernet support"
36	depends on CPU_PXA168
37	select PHYLIB
38	---help---
39	  This driver supports the pxa168 Ethernet ports.
40
41	  To compile this driver as a module, choose M here. The module
42	  will be called pxa168_eth.
43
44config SKGE
45	tristate "Marvell Yukon Gigabit Ethernet support"
46	depends on PCI
47	select CRC32
48	---help---
49	  This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
50	  and related Gigabit Ethernet adapters. It is a new smaller driver
51	  with better performance and more complete ethtool support.
52
53	  It does not support the link failover and network management
54	  features that "portable" vendor supplied sk98lin driver does.
55
56	  This driver supports adapters based on the original Yukon chipset:
57	  Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
58	  Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
59
60	  It does not support the newer Yukon2 chipset: a separate driver,
61	  sky2, is provided for these adapters.
62
63	  To compile this driver as a module, choose M here: the module
64	  will be called skge.  This is recommended.
65
66config SKGE_DEBUG
67	bool "Debugging interface"
68	depends on SKGE && DEBUG_FS
69	---help---
70	  This option adds the ability to dump driver state for debugging.
71	  The file /sys/kernel/debug/skge/ethX displays the state of the internal
72	  transmit and receive rings.
73
74	  If unsure, say N.
75
76config SKGE_GENESIS
77	bool "Support for older SysKonnect Genesis boards"
78	depends on SKGE
79	---help---
80	 This enables support for the older and uncommon SysKonnect Genesis
81	 chips, which support MII via an external transceiver, instead of
82	 an internal one. Disabling this option will save some memory
83	 by making code smaller. If unsure say Y.
84
85config SKY2
86	tristate "Marvell Yukon 2 support"
87	depends on PCI
88	select CRC32
89	---help---
90	  This driver supports Gigabit Ethernet adapters based on the
91	  Marvell Yukon 2 chipset:
92	  Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
93	  88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
94
95	  There is companion driver for the older Marvell Yukon and
96	  SysKonnect Genesis based adapters: skge.
97
98	  To compile this driver as a module, choose M here: the module
99	  will be called sky2.  This is recommended.
100
101config SKY2_DEBUG
102	bool "Debugging interface"
103	depends on SKY2 && DEBUG_FS
104	---help---
105	  This option adds the ability to dump driver state for debugging.
106	  The file /sys/kernel/debug/sky2/ethX displays the state of the internal
107	  transmit and receive rings.
108
109	  If unsure, say N.
110
111endif # NET_VENDOR_MARVELL
112