1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Marvell device configuration
4#
5
6config NET_VENDOR_MARVELL
7	bool "Marvell devices"
8	default y
9	depends on PCI || CPU_PXA168 || MV64X60 || PPC32 || PLAT_ORION || INET || COMPILE_TEST
10	help
11	  If you have a network (Ethernet) card belonging to this class, say Y.
12
13	  Note that the answer to this question doesn't directly affect the
14	  kernel: saying N will just cause the configurator to skip all
15	  the questions about Marvell devices. If you say Y, you will be
16	  asked for your specific card in the following questions.
17
18if NET_VENDOR_MARVELL
19
20config MV643XX_ETH
21	tristate "Marvell Discovery (643XX) and Orion ethernet support"
22	depends on MV64X60 || PPC32 || PLAT_ORION || COMPILE_TEST
23	depends on INET
24	select PHYLIB
25	select MVMDIO
26	help
27	  This driver supports the gigabit ethernet MACs in the
28	  Marvell Discovery PPC/MIPS chipset family (MV643XX) and
29	  in the Marvell Orion ARM SoC family.
30
31	  Some boards that use the Discovery chipset are the Momenco
32	  Ocelot C and Jaguar ATX and Pegasos II.
33
34config MVMDIO
35	tristate "Marvell MDIO interface support"
36	depends on HAS_IOMEM
37	select PHYLIB
38	help
39	  This driver supports the MDIO interface found in the network
40	  interface units of the Marvell EBU SoCs (Kirkwood, Orion5x,
41	  Dove, Armada 370 and Armada XP).
42
43	  This driver is used by the MV643XX_ETH and MVNETA drivers.
44
45config MVNETA_BM_ENABLE
46	tristate "Marvell Armada 38x/XP network interface BM support"
47	depends on MVNETA
48	depends on !64BIT
49	help
50	  This driver supports auxiliary block of the network
51	  interface units in the Marvell ARMADA XP and ARMADA 38x SoC
52	  family, which is called buffer manager.
53
54	  This driver, when enabled, strictly cooperates with mvneta
55	  driver and is common for all network ports of the devices,
56	  even for Armada 370 SoC, which doesn't support hardware
57	  buffer management.
58
59config MVNETA
60	tristate "Marvell Armada 370/38x/XP/37xx network interface support"
61	depends on ARCH_MVEBU || COMPILE_TEST
62	select MVMDIO
63	select PHYLINK
64	select PAGE_POOL
65	help
66	  This driver supports the network interface units in the
67	  Marvell ARMADA XP, ARMADA 370, ARMADA 38x and
68	  ARMADA 37xx SoC family.
69
70	  Note that this driver is distinct from the mv643xx_eth
71	  driver, which should be used for the older Marvell SoCs
72	  (Dove, Orion, Discovery, Kirkwood).
73
74config MVNETA_BM
75	tristate
76	depends on !64BIT
77	default y if MVNETA=y && MVNETA_BM_ENABLE!=n
78	default MVNETA_BM_ENABLE
79	select HWBM
80	select GENERIC_ALLOCATOR
81	help
82	  MVNETA_BM must not be 'm' if MVNETA=y, so this symbol ensures
83	  that all dependencies are met.
84
85config MVPP2
86	tristate "Marvell Armada 375/7K/8K network interface support"
87	depends on ARCH_MVEBU || COMPILE_TEST
88	select MVMDIO
89	select PHYLINK
90	help
91	  This driver supports the network interface units in the
92	  Marvell ARMADA 375, 7K and 8K SoCs.
93
94config PXA168_ETH
95	tristate "Marvell pxa168 ethernet support"
96	depends on HAS_IOMEM
97	depends on CPU_PXA168 || ARCH_BERLIN || COMPILE_TEST
98	select PHYLIB
99	help
100	  This driver supports the pxa168 Ethernet ports.
101
102	  To compile this driver as a module, choose M here. The module
103	  will be called pxa168_eth.
104
105config SKGE
106	tristate "Marvell Yukon Gigabit Ethernet support"
107	depends on PCI
108	select CRC32
109	help
110	  This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
111	  and related Gigabit Ethernet adapters. It is a new smaller driver
112	  with better performance and more complete ethtool support.
113
114	  It does not support the link failover and network management
115	  features that "portable" vendor supplied sk98lin driver does.
116
117	  This driver supports adapters based on the original Yukon chipset:
118	  Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
119	  Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
120
121	  It does not support the newer Yukon2 chipset: a separate driver,
122	  sky2, is provided for these adapters.
123
124	  To compile this driver as a module, choose M here: the module
125	  will be called skge.  This is recommended.
126
127config SKGE_DEBUG
128	bool "Debugging interface"
129	depends on SKGE && DEBUG_FS
130	help
131	  This option adds the ability to dump driver state for debugging.
132	  The file /sys/kernel/debug/skge/ethX displays the state of the internal
133	  transmit and receive rings.
134
135	  If unsure, say N.
136
137config SKGE_GENESIS
138	bool "Support for older SysKonnect Genesis boards"
139	depends on SKGE
140	help
141	 This enables support for the older and uncommon SysKonnect Genesis
142	 chips, which support MII via an external transceiver, instead of
143	 an internal one. Disabling this option will save some memory
144	 by making code smaller. If unsure say Y.
145
146config SKY2
147	tristate "Marvell Yukon 2 support"
148	depends on PCI
149	select CRC32
150	help
151	  This driver supports Gigabit Ethernet adapters based on the
152	  Marvell Yukon 2 chipset:
153	  Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
154	  88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
155
156	  There is companion driver for the older Marvell Yukon and
157	  SysKonnect Genesis based adapters: skge.
158
159	  To compile this driver as a module, choose M here: the module
160	  will be called sky2.  This is recommended.
161
162config SKY2_DEBUG
163	bool "Debugging interface"
164	depends on SKY2 && DEBUG_FS
165	help
166	  This option adds the ability to dump driver state for debugging.
167	  The file /sys/kernel/debug/sky2/ethX displays the state of the internal
168	  transmit and receive rings.
169
170	  If unsure, say N.
171
172
173source "drivers/net/ethernet/marvell/octeontx2/Kconfig"
174
175endif # NET_VENDOR_MARVELL
176