1 /*******************************************************************************
2 
3   Intel 82599 Virtual Function driver
4   Copyright(c) 1999 - 2012 Intel Corporation.
5 
6   This program is free software; you can redistribute it and/or modify it
7   under the terms and conditions of the GNU General Public License,
8   version 2, as published by the Free Software Foundation.
9 
10   This program is distributed in the hope it will be useful, but WITHOUT
11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13   more details.
14 
15   You should have received a copy of the GNU General Public License along with
16   this program; if not, write to the Free Software Foundation, Inc.,
17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18 
19   The full GNU General Public License is included in this distribution in
20   the file called "COPYING".
21 
22   Contact Information:
23   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
24   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 
26 *******************************************************************************/
27 
28 #include "vf.h"
29 #include "ixgbevf.h"
30 
31 /**
32  *  ixgbevf_start_hw_vf - Prepare hardware for Tx/Rx
33  *  @hw: pointer to hardware structure
34  *
35  *  Starts the hardware by filling the bus info structure and media type, clears
36  *  all on chip counters, initializes receive address registers, multicast
37  *  table, VLAN filter table, calls routine to set up link and flow control
38  *  settings, and leaves transmit and receive units disabled and uninitialized
39  **/
40 static s32 ixgbevf_start_hw_vf(struct ixgbe_hw *hw)
41 {
42 	/* Clear adapter stopped flag */
43 	hw->adapter_stopped = false;
44 
45 	return 0;
46 }
47 
48 /**
49  *  ixgbevf_init_hw_vf - virtual function hardware initialization
50  *  @hw: pointer to hardware structure
51  *
52  *  Initialize the hardware by resetting the hardware and then starting
53  *  the hardware
54  **/
55 static s32 ixgbevf_init_hw_vf(struct ixgbe_hw *hw)
56 {
57 	s32 status = hw->mac.ops.start_hw(hw);
58 
59 	hw->mac.ops.get_mac_addr(hw, hw->mac.addr);
60 
61 	return status;
62 }
63 
64 /**
65  *  ixgbevf_reset_hw_vf - Performs hardware reset
66  *  @hw: pointer to hardware structure
67  *
68  *  Resets the hardware by reseting the transmit and receive units, masks and
69  *  clears all interrupts.
70  **/
71 static s32 ixgbevf_reset_hw_vf(struct ixgbe_hw *hw)
72 {
73 	struct ixgbe_mbx_info *mbx = &hw->mbx;
74 	u32 timeout = IXGBE_VF_INIT_TIMEOUT;
75 	s32 ret_val = IXGBE_ERR_INVALID_MAC_ADDR;
76 	u32 msgbuf[IXGBE_VF_PERMADDR_MSG_LEN];
77 	u8 *addr = (u8 *)(&msgbuf[1]);
78 
79 	/* Call adapter stop to disable tx/rx and clear interrupts */
80 	hw->mac.ops.stop_adapter(hw);
81 
82 	/* reset the api version */
83 	hw->api_version = ixgbe_mbox_api_10;
84 
85 	IXGBE_WRITE_REG(hw, IXGBE_VFCTRL, IXGBE_CTRL_RST);
86 	IXGBE_WRITE_FLUSH(hw);
87 
88 	/* we cannot reset while the RSTI / RSTD bits are asserted */
89 	while (!mbx->ops.check_for_rst(hw) && timeout) {
90 		timeout--;
91 		udelay(5);
92 	}
93 
94 	if (!timeout)
95 		return IXGBE_ERR_RESET_FAILED;
96 
97 	/* mailbox timeout can now become active */
98 	mbx->timeout = IXGBE_VF_MBX_INIT_TIMEOUT;
99 
100 	msgbuf[0] = IXGBE_VF_RESET;
101 	mbx->ops.write_posted(hw, msgbuf, 1);
102 
103 	mdelay(10);
104 
105 	/* set our "perm_addr" based on info provided by PF */
106 	/* also set up the mc_filter_type which is piggy backed
107 	 * on the mac address in word 3 */
108 	ret_val = mbx->ops.read_posted(hw, msgbuf, IXGBE_VF_PERMADDR_MSG_LEN);
109 	if (ret_val)
110 		return ret_val;
111 
112 	/* New versions of the PF may NACK the reset return message
113 	 * to indicate that no MAC address has yet been assigned for
114 	 * the VF.
115 	 */
116 	if (msgbuf[0] != (IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK) &&
117 	    msgbuf[0] != (IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_NACK))
118 		return IXGBE_ERR_INVALID_MAC_ADDR;
119 
120 	memcpy(hw->mac.perm_addr, addr, ETH_ALEN);
121 	hw->mac.mc_filter_type = msgbuf[IXGBE_VF_MC_TYPE_WORD];
122 
123 	return 0;
124 }
125 
126 /**
127  *  ixgbevf_stop_hw_vf - Generic stop Tx/Rx units
128  *  @hw: pointer to hardware structure
129  *
130  *  Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
131  *  disables transmit and receive units. The adapter_stopped flag is used by
132  *  the shared code and drivers to determine if the adapter is in a stopped
133  *  state and should not touch the hardware.
134  **/
135 static s32 ixgbevf_stop_hw_vf(struct ixgbe_hw *hw)
136 {
137 	u32 number_of_queues;
138 	u32 reg_val;
139 	u16 i;
140 
141 	/*
142 	 * Set the adapter_stopped flag so other driver functions stop touching
143 	 * the hardware
144 	 */
145 	hw->adapter_stopped = true;
146 
147 	/* Disable the receive unit by stopped each queue */
148 	number_of_queues = hw->mac.max_rx_queues;
149 	for (i = 0; i < number_of_queues; i++) {
150 		reg_val = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(i));
151 		if (reg_val & IXGBE_RXDCTL_ENABLE) {
152 			reg_val &= ~IXGBE_RXDCTL_ENABLE;
153 			IXGBE_WRITE_REG(hw, IXGBE_VFRXDCTL(i), reg_val);
154 		}
155 	}
156 
157 	IXGBE_WRITE_FLUSH(hw);
158 
159 	/* Clear interrupt mask to stop from interrupts being generated */
160 	IXGBE_WRITE_REG(hw, IXGBE_VTEIMC, IXGBE_VF_IRQ_CLEAR_MASK);
161 
162 	/* Clear any pending interrupts */
163 	IXGBE_READ_REG(hw, IXGBE_VTEICR);
164 
165 	/* Disable the transmit unit.  Each queue must be disabled. */
166 	number_of_queues = hw->mac.max_tx_queues;
167 	for (i = 0; i < number_of_queues; i++) {
168 		reg_val = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(i));
169 		if (reg_val & IXGBE_TXDCTL_ENABLE) {
170 			reg_val &= ~IXGBE_TXDCTL_ENABLE;
171 			IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(i), reg_val);
172 		}
173 	}
174 
175 	return 0;
176 }
177 
178 /**
179  *  ixgbevf_mta_vector - Determines bit-vector in multicast table to set
180  *  @hw: pointer to hardware structure
181  *  @mc_addr: the multicast address
182  *
183  *  Extracts the 12 bits, from a multicast address, to determine which
184  *  bit-vector to set in the multicast table. The hardware uses 12 bits, from
185  *  incoming rx multicast addresses, to determine the bit-vector to check in
186  *  the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
187  *  by the MO field of the MCSTCTRL. The MO field is set during initialization
188  *  to mc_filter_type.
189  **/
190 static s32 ixgbevf_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
191 {
192 	u32 vector = 0;
193 
194 	switch (hw->mac.mc_filter_type) {
195 	case 0:   /* use bits [47:36] of the address */
196 		vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
197 		break;
198 	case 1:   /* use bits [46:35] of the address */
199 		vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
200 		break;
201 	case 2:   /* use bits [45:34] of the address */
202 		vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
203 		break;
204 	case 3:   /* use bits [43:32] of the address */
205 		vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
206 		break;
207 	default:  /* Invalid mc_filter_type */
208 		break;
209 	}
210 
211 	/* vector can only be 12-bits or boundary will be exceeded */
212 	vector &= 0xFFF;
213 	return vector;
214 }
215 
216 /**
217  *  ixgbevf_get_mac_addr_vf - Read device MAC address
218  *  @hw: pointer to the HW structure
219  *  @mac_addr: pointer to storage for retrieved MAC address
220  **/
221 static s32 ixgbevf_get_mac_addr_vf(struct ixgbe_hw *hw, u8 *mac_addr)
222 {
223 	memcpy(mac_addr, hw->mac.perm_addr, ETH_ALEN);
224 
225 	return 0;
226 }
227 
228 static s32 ixgbevf_set_uc_addr_vf(struct ixgbe_hw *hw, u32 index, u8 *addr)
229 {
230 	struct ixgbe_mbx_info *mbx = &hw->mbx;
231 	u32 msgbuf[3];
232 	u8 *msg_addr = (u8 *)(&msgbuf[1]);
233 	s32 ret_val;
234 
235 	memset(msgbuf, 0, sizeof(msgbuf));
236 	/*
237 	 * If index is one then this is the start of a new list and needs
238 	 * indication to the PF so it can do it's own list management.
239 	 * If it is zero then that tells the PF to just clear all of
240 	 * this VF's macvlans and there is no new list.
241 	 */
242 	msgbuf[0] |= index << IXGBE_VT_MSGINFO_SHIFT;
243 	msgbuf[0] |= IXGBE_VF_SET_MACVLAN;
244 	if (addr)
245 		memcpy(msg_addr, addr, ETH_ALEN);
246 	ret_val = mbx->ops.write_posted(hw, msgbuf, 3);
247 
248 	if (!ret_val)
249 		ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
250 
251 	msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
252 
253 	if (!ret_val)
254 		if (msgbuf[0] ==
255 		    (IXGBE_VF_SET_MACVLAN | IXGBE_VT_MSGTYPE_NACK))
256 			ret_val = -ENOMEM;
257 
258 	return ret_val;
259 }
260 
261 /**
262  *  ixgbevf_set_rar_vf - set device MAC address
263  *  @hw: pointer to hardware structure
264  *  @index: Receive address register to write
265  *  @addr: Address to put into receive address register
266  *  @vmdq: Unused in this implementation
267  **/
268 static s32 ixgbevf_set_rar_vf(struct ixgbe_hw *hw, u32 index, u8 *addr,
269 			      u32 vmdq)
270 {
271 	struct ixgbe_mbx_info *mbx = &hw->mbx;
272 	u32 msgbuf[3];
273 	u8 *msg_addr = (u8 *)(&msgbuf[1]);
274 	s32 ret_val;
275 
276 	memset(msgbuf, 0, sizeof(msgbuf));
277 	msgbuf[0] = IXGBE_VF_SET_MAC_ADDR;
278 	memcpy(msg_addr, addr, ETH_ALEN);
279 	ret_val = mbx->ops.write_posted(hw, msgbuf, 3);
280 
281 	if (!ret_val)
282 		ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
283 
284 	msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
285 
286 	/* if nacked the address was rejected, use "perm_addr" */
287 	if (!ret_val &&
288 	    (msgbuf[0] == (IXGBE_VF_SET_MAC_ADDR | IXGBE_VT_MSGTYPE_NACK)))
289 		ixgbevf_get_mac_addr_vf(hw, hw->mac.addr);
290 
291 	return ret_val;
292 }
293 
294 static void ixgbevf_write_msg_read_ack(struct ixgbe_hw *hw,
295 					u32 *msg, u16 size)
296 {
297 	struct ixgbe_mbx_info *mbx = &hw->mbx;
298 	u32 retmsg[IXGBE_VFMAILBOX_SIZE];
299 	s32 retval = mbx->ops.write_posted(hw, msg, size);
300 
301 	if (!retval)
302 		mbx->ops.read_posted(hw, retmsg, size);
303 }
304 
305 /**
306  *  ixgbevf_update_mc_addr_list_vf - Update Multicast addresses
307  *  @hw: pointer to the HW structure
308  *  @netdev: pointer to net device structure
309  *
310  *  Updates the Multicast Table Array.
311  **/
312 static s32 ixgbevf_update_mc_addr_list_vf(struct ixgbe_hw *hw,
313 					  struct net_device *netdev)
314 {
315 	struct netdev_hw_addr *ha;
316 	u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
317 	u16 *vector_list = (u16 *)&msgbuf[1];
318 	u32 cnt, i;
319 
320 	/* Each entry in the list uses 1 16 bit word.  We have 30
321 	 * 16 bit words available in our HW msg buffer (minus 1 for the
322 	 * msg type).  That's 30 hash values if we pack 'em right.  If
323 	 * there are more than 30 MC addresses to add then punt the
324 	 * extras for now and then add code to handle more than 30 later.
325 	 * It would be unusual for a server to request that many multi-cast
326 	 * addresses except for in large enterprise network environments.
327 	 */
328 
329 	cnt = netdev_mc_count(netdev);
330 	if (cnt > 30)
331 		cnt = 30;
332 	msgbuf[0] = IXGBE_VF_SET_MULTICAST;
333 	msgbuf[0] |= cnt << IXGBE_VT_MSGINFO_SHIFT;
334 
335 	i = 0;
336 	netdev_for_each_mc_addr(ha, netdev) {
337 		if (i == cnt)
338 			break;
339 		if (is_link_local_ether_addr(ha->addr))
340 			continue;
341 
342 		vector_list[i++] = ixgbevf_mta_vector(hw, ha->addr);
343 	}
344 
345 	ixgbevf_write_msg_read_ack(hw, msgbuf, IXGBE_VFMAILBOX_SIZE);
346 
347 	return 0;
348 }
349 
350 /**
351  *  ixgbevf_set_vfta_vf - Set/Unset vlan filter table address
352  *  @hw: pointer to the HW structure
353  *  @vlan: 12 bit VLAN ID
354  *  @vind: unused by VF drivers
355  *  @vlan_on: if true then set bit, else clear bit
356  **/
357 static s32 ixgbevf_set_vfta_vf(struct ixgbe_hw *hw, u32 vlan, u32 vind,
358 			       bool vlan_on)
359 {
360 	struct ixgbe_mbx_info *mbx = &hw->mbx;
361 	u32 msgbuf[2];
362 	s32 err;
363 
364 	msgbuf[0] = IXGBE_VF_SET_VLAN;
365 	msgbuf[1] = vlan;
366 	/* Setting the 8 bit field MSG INFO to TRUE indicates "add" */
367 	msgbuf[0] |= vlan_on << IXGBE_VT_MSGINFO_SHIFT;
368 
369 	err = mbx->ops.write_posted(hw, msgbuf, 2);
370 	if (err)
371 		goto mbx_err;
372 
373 	err = mbx->ops.read_posted(hw, msgbuf, 2);
374 	if (err)
375 		goto mbx_err;
376 
377 	/* remove extra bits from the message */
378 	msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
379 	msgbuf[0] &= ~(0xFF << IXGBE_VT_MSGINFO_SHIFT);
380 
381 	if (msgbuf[0] != (IXGBE_VF_SET_VLAN | IXGBE_VT_MSGTYPE_ACK))
382 		err = IXGBE_ERR_INVALID_ARGUMENT;
383 
384 mbx_err:
385 	return err;
386 }
387 
388 /**
389  *  ixgbevf_setup_mac_link_vf - Setup MAC link settings
390  *  @hw: pointer to hardware structure
391  *  @speed: Unused in this implementation
392  *  @autoneg: Unused in this implementation
393  *  @autoneg_wait_to_complete: Unused in this implementation
394  *
395  *  Do nothing and return success.  VF drivers are not allowed to change
396  *  global settings.  Maintained for driver compatibility.
397  **/
398 static s32 ixgbevf_setup_mac_link_vf(struct ixgbe_hw *hw,
399 				     ixgbe_link_speed speed, bool autoneg,
400 				     bool autoneg_wait_to_complete)
401 {
402 	return 0;
403 }
404 
405 /**
406  *  ixgbevf_check_mac_link_vf - Get link/speed status
407  *  @hw: pointer to hardware structure
408  *  @speed: pointer to link speed
409  *  @link_up: true is link is up, false otherwise
410  *  @autoneg_wait_to_complete: true when waiting for completion is needed
411  *
412  *  Reads the links register to determine if link is up and the current speed
413  **/
414 static s32 ixgbevf_check_mac_link_vf(struct ixgbe_hw *hw,
415 				     ixgbe_link_speed *speed,
416 				     bool *link_up,
417 				     bool autoneg_wait_to_complete)
418 {
419 	struct ixgbe_mbx_info *mbx = &hw->mbx;
420 	struct ixgbe_mac_info *mac = &hw->mac;
421 	s32 ret_val = 0;
422 	u32 links_reg;
423 	u32 in_msg = 0;
424 
425 	/* If we were hit with a reset drop the link */
426 	if (!mbx->ops.check_for_rst(hw) || !mbx->timeout)
427 		mac->get_link_status = true;
428 
429 	if (!mac->get_link_status)
430 		goto out;
431 
432 	/* if link status is down no point in checking to see if pf is up */
433 	links_reg = IXGBE_READ_REG(hw, IXGBE_VFLINKS);
434 	if (!(links_reg & IXGBE_LINKS_UP))
435 		goto out;
436 
437 	switch (links_reg & IXGBE_LINKS_SPEED_82599) {
438 	case IXGBE_LINKS_SPEED_10G_82599:
439 		*speed = IXGBE_LINK_SPEED_10GB_FULL;
440 		break;
441 	case IXGBE_LINKS_SPEED_1G_82599:
442 		*speed = IXGBE_LINK_SPEED_1GB_FULL;
443 		break;
444 	case IXGBE_LINKS_SPEED_100_82599:
445 		*speed = IXGBE_LINK_SPEED_100_FULL;
446 		break;
447 	}
448 
449 	/* if the read failed it could just be a mailbox collision, best wait
450 	 * until we are called again and don't report an error */
451 	if (mbx->ops.read(hw, &in_msg, 1))
452 		goto out;
453 
454 	if (!(in_msg & IXGBE_VT_MSGTYPE_CTS)) {
455 		/* msg is not CTS and is NACK we must have lost CTS status */
456 		if (in_msg & IXGBE_VT_MSGTYPE_NACK)
457 			ret_val = -1;
458 		goto out;
459 	}
460 
461 	/* the pf is talking, if we timed out in the past we reinit */
462 	if (!mbx->timeout) {
463 		ret_val = -1;
464 		goto out;
465 	}
466 
467 	/* if we passed all the tests above then the link is up and we no
468 	 * longer need to check for link */
469 	mac->get_link_status = false;
470 
471 out:
472 	*link_up = !mac->get_link_status;
473 	return ret_val;
474 }
475 
476 /**
477  *  ixgbevf_rlpml_set_vf - Set the maximum receive packet length
478  *  @hw: pointer to the HW structure
479  *  @max_size: value to assign to max frame size
480  **/
481 void ixgbevf_rlpml_set_vf(struct ixgbe_hw *hw, u16 max_size)
482 {
483 	u32 msgbuf[2];
484 
485 	msgbuf[0] = IXGBE_VF_SET_LPE;
486 	msgbuf[1] = max_size;
487 	ixgbevf_write_msg_read_ack(hw, msgbuf, 2);
488 }
489 
490 /**
491  *  ixgbevf_negotiate_api_version - Negotiate supported API version
492  *  @hw: pointer to the HW structure
493  *  @api: integer containing requested API version
494  **/
495 int ixgbevf_negotiate_api_version(struct ixgbe_hw *hw, int api)
496 {
497 	int err;
498 	u32 msg[3];
499 
500 	/* Negotiate the mailbox API version */
501 	msg[0] = IXGBE_VF_API_NEGOTIATE;
502 	msg[1] = api;
503 	msg[2] = 0;
504 	err = hw->mbx.ops.write_posted(hw, msg, 3);
505 
506 	if (!err)
507 		err = hw->mbx.ops.read_posted(hw, msg, 3);
508 
509 	if (!err) {
510 		msg[0] &= ~IXGBE_VT_MSGTYPE_CTS;
511 
512 		/* Store value and return 0 on success */
513 		if (msg[0] == (IXGBE_VF_API_NEGOTIATE | IXGBE_VT_MSGTYPE_ACK)) {
514 			hw->api_version = api;
515 			return 0;
516 		}
517 
518 		err = IXGBE_ERR_INVALID_ARGUMENT;
519 	}
520 
521 	return err;
522 }
523 
524 int ixgbevf_get_queues(struct ixgbe_hw *hw, unsigned int *num_tcs,
525 		       unsigned int *default_tc)
526 {
527 	int err;
528 	u32 msg[5];
529 
530 	/* do nothing if API doesn't support ixgbevf_get_queues */
531 	switch (hw->api_version) {
532 	case ixgbe_mbox_api_11:
533 		break;
534 	default:
535 		return 0;
536 	}
537 
538 	/* Fetch queue configuration from the PF */
539 	msg[0] = IXGBE_VF_GET_QUEUE;
540 	msg[1] = msg[2] = msg[3] = msg[4] = 0;
541 	err = hw->mbx.ops.write_posted(hw, msg, 5);
542 
543 	if (!err)
544 		err = hw->mbx.ops.read_posted(hw, msg, 5);
545 
546 	if (!err) {
547 		msg[0] &= ~IXGBE_VT_MSGTYPE_CTS;
548 
549 		/*
550 		 * if we we didn't get an ACK there must have been
551 		 * some sort of mailbox error so we should treat it
552 		 * as such
553 		 */
554 		if (msg[0] != (IXGBE_VF_GET_QUEUE | IXGBE_VT_MSGTYPE_ACK))
555 			return IXGBE_ERR_MBX;
556 
557 		/* record and validate values from message */
558 		hw->mac.max_tx_queues = msg[IXGBE_VF_TX_QUEUES];
559 		if (hw->mac.max_tx_queues == 0 ||
560 		    hw->mac.max_tx_queues > IXGBE_VF_MAX_TX_QUEUES)
561 			hw->mac.max_tx_queues = IXGBE_VF_MAX_TX_QUEUES;
562 
563 		hw->mac.max_rx_queues = msg[IXGBE_VF_RX_QUEUES];
564 		if (hw->mac.max_rx_queues == 0 ||
565 		    hw->mac.max_rx_queues > IXGBE_VF_MAX_RX_QUEUES)
566 			hw->mac.max_rx_queues = IXGBE_VF_MAX_RX_QUEUES;
567 
568 		*num_tcs = msg[IXGBE_VF_TRANS_VLAN];
569 		/* in case of unknown state assume we cannot tag frames */
570 		if (*num_tcs > hw->mac.max_rx_queues)
571 			*num_tcs = 1;
572 
573 		*default_tc = msg[IXGBE_VF_DEF_QUEUE];
574 		/* default to queue 0 on out-of-bounds queue number */
575 		if (*default_tc >= hw->mac.max_tx_queues)
576 			*default_tc = 0;
577 	}
578 
579 	return err;
580 }
581 
582 static const struct ixgbe_mac_operations ixgbevf_mac_ops = {
583 	.init_hw             = ixgbevf_init_hw_vf,
584 	.reset_hw            = ixgbevf_reset_hw_vf,
585 	.start_hw            = ixgbevf_start_hw_vf,
586 	.get_mac_addr        = ixgbevf_get_mac_addr_vf,
587 	.stop_adapter        = ixgbevf_stop_hw_vf,
588 	.setup_link          = ixgbevf_setup_mac_link_vf,
589 	.check_link          = ixgbevf_check_mac_link_vf,
590 	.set_rar             = ixgbevf_set_rar_vf,
591 	.update_mc_addr_list = ixgbevf_update_mc_addr_list_vf,
592 	.set_uc_addr         = ixgbevf_set_uc_addr_vf,
593 	.set_vfta            = ixgbevf_set_vfta_vf,
594 };
595 
596 const struct ixgbevf_info ixgbevf_82599_vf_info = {
597 	.mac = ixgbe_mac_82599_vf,
598 	.mac_ops = &ixgbevf_mac_ops,
599 };
600 
601 const struct ixgbevf_info ixgbevf_X540_vf_info = {
602 	.mac = ixgbe_mac_X540_vf,
603 	.mac_ops = &ixgbevf_mac_ops,
604 };
605