1 // SPDX-License-Identifier: GPL-2.0 2 /* Copyright(c) 1999 - 2018 Intel Corporation. */ 3 4 #include "ixgbe_x540.h" 5 #include "ixgbe_type.h" 6 #include "ixgbe_common.h" 7 #include "ixgbe_phy.h" 8 9 static s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *, ixgbe_link_speed); 10 static s32 ixgbe_setup_fc_x550em(struct ixgbe_hw *); 11 static void ixgbe_fc_autoneg_fiber_x550em_a(struct ixgbe_hw *); 12 static void ixgbe_fc_autoneg_backplane_x550em_a(struct ixgbe_hw *); 13 static s32 ixgbe_setup_fc_backplane_x550em_a(struct ixgbe_hw *); 14 15 static s32 ixgbe_get_invariants_X550_x(struct ixgbe_hw *hw) 16 { 17 struct ixgbe_mac_info *mac = &hw->mac; 18 struct ixgbe_phy_info *phy = &hw->phy; 19 struct ixgbe_link_info *link = &hw->link; 20 21 /* Start with X540 invariants, since so simular */ 22 ixgbe_get_invariants_X540(hw); 23 24 if (mac->ops.get_media_type(hw) != ixgbe_media_type_copper) 25 phy->ops.set_phy_power = NULL; 26 27 link->addr = IXGBE_CS4227; 28 29 return 0; 30 } 31 32 static s32 ixgbe_get_invariants_X550_x_fw(struct ixgbe_hw *hw) 33 { 34 struct ixgbe_phy_info *phy = &hw->phy; 35 36 /* Start with X540 invariants, since so similar */ 37 ixgbe_get_invariants_X540(hw); 38 39 phy->ops.set_phy_power = NULL; 40 41 return 0; 42 } 43 44 static s32 ixgbe_get_invariants_X550_a(struct ixgbe_hw *hw) 45 { 46 struct ixgbe_mac_info *mac = &hw->mac; 47 struct ixgbe_phy_info *phy = &hw->phy; 48 49 /* Start with X540 invariants, since so simular */ 50 ixgbe_get_invariants_X540(hw); 51 52 if (mac->ops.get_media_type(hw) != ixgbe_media_type_copper) 53 phy->ops.set_phy_power = NULL; 54 55 return 0; 56 } 57 58 static s32 ixgbe_get_invariants_X550_a_fw(struct ixgbe_hw *hw) 59 { 60 struct ixgbe_phy_info *phy = &hw->phy; 61 62 /* Start with X540 invariants, since so similar */ 63 ixgbe_get_invariants_X540(hw); 64 65 phy->ops.set_phy_power = NULL; 66 67 return 0; 68 } 69 70 /** ixgbe_setup_mux_ctl - Setup ESDP register for I2C mux control 71 * @hw: pointer to hardware structure 72 **/ 73 static void ixgbe_setup_mux_ctl(struct ixgbe_hw *hw) 74 { 75 u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); 76 77 if (hw->bus.lan_id) { 78 esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1); 79 esdp |= IXGBE_ESDP_SDP1_DIR; 80 } 81 esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR); 82 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); 83 IXGBE_WRITE_FLUSH(hw); 84 } 85 86 /** 87 * ixgbe_read_cs4227 - Read CS4227 register 88 * @hw: pointer to hardware structure 89 * @reg: register number to write 90 * @value: pointer to receive value read 91 * 92 * Returns status code 93 */ 94 static s32 ixgbe_read_cs4227(struct ixgbe_hw *hw, u16 reg, u16 *value) 95 { 96 return hw->link.ops.read_link_unlocked(hw, hw->link.addr, reg, value); 97 } 98 99 /** 100 * ixgbe_write_cs4227 - Write CS4227 register 101 * @hw: pointer to hardware structure 102 * @reg: register number to write 103 * @value: value to write to register 104 * 105 * Returns status code 106 */ 107 static s32 ixgbe_write_cs4227(struct ixgbe_hw *hw, u16 reg, u16 value) 108 { 109 return hw->link.ops.write_link_unlocked(hw, hw->link.addr, reg, value); 110 } 111 112 /** 113 * ixgbe_read_pe - Read register from port expander 114 * @hw: pointer to hardware structure 115 * @reg: register number to read 116 * @value: pointer to receive read value 117 * 118 * Returns status code 119 */ 120 static s32 ixgbe_read_pe(struct ixgbe_hw *hw, u8 reg, u8 *value) 121 { 122 s32 status; 123 124 status = ixgbe_read_i2c_byte_generic_unlocked(hw, reg, IXGBE_PE, value); 125 if (status) 126 hw_err(hw, "port expander access failed with %d\n", status); 127 return status; 128 } 129 130 /** 131 * ixgbe_write_pe - Write register to port expander 132 * @hw: pointer to hardware structure 133 * @reg: register number to write 134 * @value: value to write 135 * 136 * Returns status code 137 */ 138 static s32 ixgbe_write_pe(struct ixgbe_hw *hw, u8 reg, u8 value) 139 { 140 s32 status; 141 142 status = ixgbe_write_i2c_byte_generic_unlocked(hw, reg, IXGBE_PE, 143 value); 144 if (status) 145 hw_err(hw, "port expander access failed with %d\n", status); 146 return status; 147 } 148 149 /** 150 * ixgbe_reset_cs4227 - Reset CS4227 using port expander 151 * @hw: pointer to hardware structure 152 * 153 * This function assumes that the caller has acquired the proper semaphore. 154 * Returns error code 155 */ 156 static s32 ixgbe_reset_cs4227(struct ixgbe_hw *hw) 157 { 158 s32 status; 159 u32 retry; 160 u16 value; 161 u8 reg; 162 163 /* Trigger hard reset. */ 164 status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®); 165 if (status) 166 return status; 167 reg |= IXGBE_PE_BIT1; 168 status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg); 169 if (status) 170 return status; 171 172 status = ixgbe_read_pe(hw, IXGBE_PE_CONFIG, ®); 173 if (status) 174 return status; 175 reg &= ~IXGBE_PE_BIT1; 176 status = ixgbe_write_pe(hw, IXGBE_PE_CONFIG, reg); 177 if (status) 178 return status; 179 180 status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®); 181 if (status) 182 return status; 183 reg &= ~IXGBE_PE_BIT1; 184 status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg); 185 if (status) 186 return status; 187 188 usleep_range(IXGBE_CS4227_RESET_HOLD, IXGBE_CS4227_RESET_HOLD + 100); 189 190 status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®); 191 if (status) 192 return status; 193 reg |= IXGBE_PE_BIT1; 194 status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg); 195 if (status) 196 return status; 197 198 /* Wait for the reset to complete. */ 199 msleep(IXGBE_CS4227_RESET_DELAY); 200 for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) { 201 status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EFUSE_STATUS, 202 &value); 203 if (!status && value == IXGBE_CS4227_EEPROM_LOAD_OK) 204 break; 205 msleep(IXGBE_CS4227_CHECK_DELAY); 206 } 207 if (retry == IXGBE_CS4227_RETRIES) { 208 hw_err(hw, "CS4227 reset did not complete\n"); 209 return IXGBE_ERR_PHY; 210 } 211 212 status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EEPROM_STATUS, &value); 213 if (status || !(value & IXGBE_CS4227_EEPROM_LOAD_OK)) { 214 hw_err(hw, "CS4227 EEPROM did not load successfully\n"); 215 return IXGBE_ERR_PHY; 216 } 217 218 return 0; 219 } 220 221 /** 222 * ixgbe_check_cs4227 - Check CS4227 and reset as needed 223 * @hw: pointer to hardware structure 224 */ 225 static void ixgbe_check_cs4227(struct ixgbe_hw *hw) 226 { 227 u32 swfw_mask = hw->phy.phy_semaphore_mask; 228 s32 status; 229 u16 value; 230 u8 retry; 231 232 for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) { 233 status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); 234 if (status) { 235 hw_err(hw, "semaphore failed with %d\n", status); 236 msleep(IXGBE_CS4227_CHECK_DELAY); 237 continue; 238 } 239 240 /* Get status of reset flow. */ 241 status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value); 242 if (!status && value == IXGBE_CS4227_RESET_COMPLETE) 243 goto out; 244 245 if (status || value != IXGBE_CS4227_RESET_PENDING) 246 break; 247 248 /* Reset is pending. Wait and check again. */ 249 hw->mac.ops.release_swfw_sync(hw, swfw_mask); 250 msleep(IXGBE_CS4227_CHECK_DELAY); 251 } 252 /* If still pending, assume other instance failed. */ 253 if (retry == IXGBE_CS4227_RETRIES) { 254 status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); 255 if (status) { 256 hw_err(hw, "semaphore failed with %d\n", status); 257 return; 258 } 259 } 260 261 /* Reset the CS4227. */ 262 status = ixgbe_reset_cs4227(hw); 263 if (status) { 264 hw_err(hw, "CS4227 reset failed: %d", status); 265 goto out; 266 } 267 268 /* Reset takes so long, temporarily release semaphore in case the 269 * other driver instance is waiting for the reset indication. 270 */ 271 ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH, 272 IXGBE_CS4227_RESET_PENDING); 273 hw->mac.ops.release_swfw_sync(hw, swfw_mask); 274 usleep_range(10000, 12000); 275 status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); 276 if (status) { 277 hw_err(hw, "semaphore failed with %d", status); 278 return; 279 } 280 281 /* Record completion for next time. */ 282 status = ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH, 283 IXGBE_CS4227_RESET_COMPLETE); 284 285 out: 286 hw->mac.ops.release_swfw_sync(hw, swfw_mask); 287 msleep(hw->eeprom.semaphore_delay); 288 } 289 290 /** ixgbe_identify_phy_x550em - Get PHY type based on device id 291 * @hw: pointer to hardware structure 292 * 293 * Returns error code 294 */ 295 static s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw) 296 { 297 switch (hw->device_id) { 298 case IXGBE_DEV_ID_X550EM_A_SFP: 299 if (hw->bus.lan_id) 300 hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM; 301 else 302 hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM; 303 return ixgbe_identify_module_generic(hw); 304 case IXGBE_DEV_ID_X550EM_X_SFP: 305 /* set up for CS4227 usage */ 306 hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; 307 ixgbe_setup_mux_ctl(hw); 308 ixgbe_check_cs4227(hw); 309 fallthrough; 310 case IXGBE_DEV_ID_X550EM_A_SFP_N: 311 return ixgbe_identify_module_generic(hw); 312 case IXGBE_DEV_ID_X550EM_X_KX4: 313 hw->phy.type = ixgbe_phy_x550em_kx4; 314 break; 315 case IXGBE_DEV_ID_X550EM_X_XFI: 316 hw->phy.type = ixgbe_phy_x550em_xfi; 317 break; 318 case IXGBE_DEV_ID_X550EM_X_KR: 319 case IXGBE_DEV_ID_X550EM_A_KR: 320 case IXGBE_DEV_ID_X550EM_A_KR_L: 321 hw->phy.type = ixgbe_phy_x550em_kr; 322 break; 323 case IXGBE_DEV_ID_X550EM_A_10G_T: 324 if (hw->bus.lan_id) 325 hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM; 326 else 327 hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM; 328 fallthrough; 329 case IXGBE_DEV_ID_X550EM_X_10G_T: 330 return ixgbe_identify_phy_generic(hw); 331 case IXGBE_DEV_ID_X550EM_X_1G_T: 332 hw->phy.type = ixgbe_phy_ext_1g_t; 333 break; 334 case IXGBE_DEV_ID_X550EM_A_1G_T: 335 case IXGBE_DEV_ID_X550EM_A_1G_T_L: 336 hw->phy.type = ixgbe_phy_fw; 337 hw->phy.ops.read_reg = NULL; 338 hw->phy.ops.write_reg = NULL; 339 if (hw->bus.lan_id) 340 hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY1_SM; 341 else 342 hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY0_SM; 343 break; 344 default: 345 break; 346 } 347 return 0; 348 } 349 350 static s32 ixgbe_read_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr, 351 u32 device_type, u16 *phy_data) 352 { 353 return IXGBE_NOT_IMPLEMENTED; 354 } 355 356 static s32 ixgbe_write_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr, 357 u32 device_type, u16 phy_data) 358 { 359 return IXGBE_NOT_IMPLEMENTED; 360 } 361 362 /** 363 * ixgbe_read_i2c_combined_generic - Perform I2C read combined operation 364 * @hw: pointer to the hardware structure 365 * @addr: I2C bus address to read from 366 * @reg: I2C device register to read from 367 * @val: pointer to location to receive read value 368 * 369 * Returns an error code on error. 370 **/ 371 static s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr, 372 u16 reg, u16 *val) 373 { 374 return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, true); 375 } 376 377 /** 378 * ixgbe_read_i2c_combined_generic_unlocked - Do I2C read combined operation 379 * @hw: pointer to the hardware structure 380 * @addr: I2C bus address to read from 381 * @reg: I2C device register to read from 382 * @val: pointer to location to receive read value 383 * 384 * Returns an error code on error. 385 **/ 386 static s32 387 ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr, 388 u16 reg, u16 *val) 389 { 390 return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, false); 391 } 392 393 /** 394 * ixgbe_write_i2c_combined_generic - Perform I2C write combined operation 395 * @hw: pointer to the hardware structure 396 * @addr: I2C bus address to write to 397 * @reg: I2C device register to write to 398 * @val: value to write 399 * 400 * Returns an error code on error. 401 **/ 402 static s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw, 403 u8 addr, u16 reg, u16 val) 404 { 405 return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, true); 406 } 407 408 /** 409 * ixgbe_write_i2c_combined_generic_unlocked - Do I2C write combined operation 410 * @hw: pointer to the hardware structure 411 * @addr: I2C bus address to write to 412 * @reg: I2C device register to write to 413 * @val: value to write 414 * 415 * Returns an error code on error. 416 **/ 417 static s32 418 ixgbe_write_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, 419 u8 addr, u16 reg, u16 val) 420 { 421 return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, false); 422 } 423 424 /** 425 * ixgbe_fw_phy_activity - Perform an activity on a PHY 426 * @hw: pointer to hardware structure 427 * @activity: activity to perform 428 * @data: Pointer to 4 32-bit words of data 429 */ 430 s32 ixgbe_fw_phy_activity(struct ixgbe_hw *hw, u16 activity, 431 u32 (*data)[FW_PHY_ACT_DATA_COUNT]) 432 { 433 union { 434 struct ixgbe_hic_phy_activity_req cmd; 435 struct ixgbe_hic_phy_activity_resp rsp; 436 } hic; 437 u16 retries = FW_PHY_ACT_RETRIES; 438 s32 rc; 439 u32 i; 440 441 do { 442 memset(&hic, 0, sizeof(hic)); 443 hic.cmd.hdr.cmd = FW_PHY_ACT_REQ_CMD; 444 hic.cmd.hdr.buf_len = FW_PHY_ACT_REQ_LEN; 445 hic.cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; 446 hic.cmd.port_number = hw->bus.lan_id; 447 hic.cmd.activity_id = cpu_to_le16(activity); 448 for (i = 0; i < ARRAY_SIZE(hic.cmd.data); ++i) 449 hic.cmd.data[i] = cpu_to_be32((*data)[i]); 450 451 rc = ixgbe_host_interface_command(hw, &hic.cmd, sizeof(hic.cmd), 452 IXGBE_HI_COMMAND_TIMEOUT, 453 true); 454 if (rc) 455 return rc; 456 if (hic.rsp.hdr.cmd_or_resp.ret_status == 457 FW_CEM_RESP_STATUS_SUCCESS) { 458 for (i = 0; i < FW_PHY_ACT_DATA_COUNT; ++i) 459 (*data)[i] = be32_to_cpu(hic.rsp.data[i]); 460 return 0; 461 } 462 usleep_range(20, 30); 463 --retries; 464 } while (retries > 0); 465 466 return IXGBE_ERR_HOST_INTERFACE_COMMAND; 467 } 468 469 static const struct { 470 u16 fw_speed; 471 ixgbe_link_speed phy_speed; 472 } ixgbe_fw_map[] = { 473 { FW_PHY_ACT_LINK_SPEED_10, IXGBE_LINK_SPEED_10_FULL }, 474 { FW_PHY_ACT_LINK_SPEED_100, IXGBE_LINK_SPEED_100_FULL }, 475 { FW_PHY_ACT_LINK_SPEED_1G, IXGBE_LINK_SPEED_1GB_FULL }, 476 { FW_PHY_ACT_LINK_SPEED_2_5G, IXGBE_LINK_SPEED_2_5GB_FULL }, 477 { FW_PHY_ACT_LINK_SPEED_5G, IXGBE_LINK_SPEED_5GB_FULL }, 478 { FW_PHY_ACT_LINK_SPEED_10G, IXGBE_LINK_SPEED_10GB_FULL }, 479 }; 480 481 /** 482 * ixgbe_get_phy_id_fw - Get the phy ID via firmware command 483 * @hw: pointer to hardware structure 484 * 485 * Returns error code 486 */ 487 static s32 ixgbe_get_phy_id_fw(struct ixgbe_hw *hw) 488 { 489 u32 info[FW_PHY_ACT_DATA_COUNT] = { 0 }; 490 u16 phy_speeds; 491 u16 phy_id_lo; 492 s32 rc; 493 u16 i; 494 495 if (hw->phy.id) 496 return 0; 497 498 rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_PHY_INFO, &info); 499 if (rc) 500 return rc; 501 502 hw->phy.speeds_supported = 0; 503 phy_speeds = info[0] & FW_PHY_INFO_SPEED_MASK; 504 for (i = 0; i < ARRAY_SIZE(ixgbe_fw_map); ++i) { 505 if (phy_speeds & ixgbe_fw_map[i].fw_speed) 506 hw->phy.speeds_supported |= ixgbe_fw_map[i].phy_speed; 507 } 508 509 hw->phy.id = info[0] & FW_PHY_INFO_ID_HI_MASK; 510 phy_id_lo = info[1] & FW_PHY_INFO_ID_LO_MASK; 511 hw->phy.id |= phy_id_lo & IXGBE_PHY_REVISION_MASK; 512 hw->phy.revision = phy_id_lo & ~IXGBE_PHY_REVISION_MASK; 513 if (!hw->phy.id || hw->phy.id == IXGBE_PHY_REVISION_MASK) 514 return IXGBE_ERR_PHY_ADDR_INVALID; 515 516 hw->phy.autoneg_advertised = hw->phy.speeds_supported; 517 hw->phy.eee_speeds_supported = IXGBE_LINK_SPEED_100_FULL | 518 IXGBE_LINK_SPEED_1GB_FULL; 519 hw->phy.eee_speeds_advertised = hw->phy.eee_speeds_supported; 520 return 0; 521 } 522 523 /** 524 * ixgbe_identify_phy_fw - Get PHY type based on firmware command 525 * @hw: pointer to hardware structure 526 * 527 * Returns error code 528 */ 529 static s32 ixgbe_identify_phy_fw(struct ixgbe_hw *hw) 530 { 531 if (hw->bus.lan_id) 532 hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM; 533 else 534 hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM; 535 536 hw->phy.type = ixgbe_phy_fw; 537 hw->phy.ops.read_reg = NULL; 538 hw->phy.ops.write_reg = NULL; 539 return ixgbe_get_phy_id_fw(hw); 540 } 541 542 /** 543 * ixgbe_shutdown_fw_phy - Shutdown a firmware-controlled PHY 544 * @hw: pointer to hardware structure 545 * 546 * Returns error code 547 */ 548 static s32 ixgbe_shutdown_fw_phy(struct ixgbe_hw *hw) 549 { 550 u32 setup[FW_PHY_ACT_DATA_COUNT] = { 0 }; 551 552 setup[0] = FW_PHY_ACT_FORCE_LINK_DOWN_OFF; 553 return ixgbe_fw_phy_activity(hw, FW_PHY_ACT_FORCE_LINK_DOWN, &setup); 554 } 555 556 /** 557 * ixgbe_setup_fw_link - Setup firmware-controlled PHYs 558 * @hw: pointer to hardware structure 559 */ 560 static s32 ixgbe_setup_fw_link(struct ixgbe_hw *hw) 561 { 562 u32 setup[FW_PHY_ACT_DATA_COUNT] = { 0 }; 563 s32 rc; 564 u16 i; 565 566 if (hw->phy.reset_disable || ixgbe_check_reset_blocked(hw)) 567 return 0; 568 569 if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) { 570 hw_err(hw, "rx_pause not valid in strict IEEE mode\n"); 571 return IXGBE_ERR_INVALID_LINK_SETTINGS; 572 } 573 574 switch (hw->fc.requested_mode) { 575 case ixgbe_fc_full: 576 setup[0] |= FW_PHY_ACT_SETUP_LINK_PAUSE_RXTX << 577 FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT; 578 break; 579 case ixgbe_fc_rx_pause: 580 setup[0] |= FW_PHY_ACT_SETUP_LINK_PAUSE_RX << 581 FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT; 582 break; 583 case ixgbe_fc_tx_pause: 584 setup[0] |= FW_PHY_ACT_SETUP_LINK_PAUSE_TX << 585 FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT; 586 break; 587 default: 588 break; 589 } 590 591 for (i = 0; i < ARRAY_SIZE(ixgbe_fw_map); ++i) { 592 if (hw->phy.autoneg_advertised & ixgbe_fw_map[i].phy_speed) 593 setup[0] |= ixgbe_fw_map[i].fw_speed; 594 } 595 setup[0] |= FW_PHY_ACT_SETUP_LINK_HP | FW_PHY_ACT_SETUP_LINK_AN; 596 597 if (hw->phy.eee_speeds_advertised) 598 setup[0] |= FW_PHY_ACT_SETUP_LINK_EEE; 599 600 rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_SETUP_LINK, &setup); 601 if (rc) 602 return rc; 603 if (setup[0] == FW_PHY_ACT_SETUP_LINK_RSP_DOWN) 604 return IXGBE_ERR_OVERTEMP; 605 return 0; 606 } 607 608 /** 609 * ixgbe_fc_autoneg_fw - Set up flow control for FW-controlled PHYs 610 * @hw: pointer to hardware structure 611 * 612 * Called at init time to set up flow control. 613 */ 614 static s32 ixgbe_fc_autoneg_fw(struct ixgbe_hw *hw) 615 { 616 if (hw->fc.requested_mode == ixgbe_fc_default) 617 hw->fc.requested_mode = ixgbe_fc_full; 618 619 return ixgbe_setup_fw_link(hw); 620 } 621 622 /** ixgbe_init_eeprom_params_X550 - Initialize EEPROM params 623 * @hw: pointer to hardware structure 624 * 625 * Initializes the EEPROM parameters ixgbe_eeprom_info within the 626 * ixgbe_hw struct in order to set up EEPROM access. 627 **/ 628 static s32 ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw) 629 { 630 struct ixgbe_eeprom_info *eeprom = &hw->eeprom; 631 u32 eec; 632 u16 eeprom_size; 633 634 if (eeprom->type == ixgbe_eeprom_uninitialized) { 635 eeprom->semaphore_delay = 10; 636 eeprom->type = ixgbe_flash; 637 638 eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw)); 639 eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >> 640 IXGBE_EEC_SIZE_SHIFT); 641 eeprom->word_size = BIT(eeprom_size + 642 IXGBE_EEPROM_WORD_SIZE_SHIFT); 643 644 hw_dbg(hw, "Eeprom params: type = %d, size = %d\n", 645 eeprom->type, eeprom->word_size); 646 } 647 648 return 0; 649 } 650 651 /** 652 * ixgbe_iosf_wait - Wait for IOSF command completion 653 * @hw: pointer to hardware structure 654 * @ctrl: pointer to location to receive final IOSF control value 655 * 656 * Return: failing status on timeout 657 * 658 * Note: ctrl can be NULL if the IOSF control register value is not needed 659 */ 660 static s32 ixgbe_iosf_wait(struct ixgbe_hw *hw, u32 *ctrl) 661 { 662 u32 i, command; 663 664 /* Check every 10 usec to see if the address cycle completed. 665 * The SB IOSF BUSY bit will clear when the operation is 666 * complete. 667 */ 668 for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { 669 command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL); 670 if (!(command & IXGBE_SB_IOSF_CTRL_BUSY)) 671 break; 672 udelay(10); 673 } 674 if (ctrl) 675 *ctrl = command; 676 if (i == IXGBE_MDIO_COMMAND_TIMEOUT) { 677 hw_dbg(hw, "IOSF wait timed out\n"); 678 return IXGBE_ERR_PHY; 679 } 680 681 return 0; 682 } 683 684 /** ixgbe_read_iosf_sb_reg_x550 - Writes a value to specified register of the 685 * IOSF device 686 * @hw: pointer to hardware structure 687 * @reg_addr: 32 bit PHY register to write 688 * @device_type: 3 bit device type 689 * @phy_data: Pointer to read data from the register 690 **/ 691 static s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr, 692 u32 device_type, u32 *data) 693 { 694 u32 gssr = IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_PHY0_SM; 695 u32 command, error; 696 s32 ret; 697 698 ret = hw->mac.ops.acquire_swfw_sync(hw, gssr); 699 if (ret) 700 return ret; 701 702 ret = ixgbe_iosf_wait(hw, NULL); 703 if (ret) 704 goto out; 705 706 command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) | 707 (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT)); 708 709 /* Write IOSF control register */ 710 IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command); 711 712 ret = ixgbe_iosf_wait(hw, &command); 713 714 if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) { 715 error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >> 716 IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT; 717 hw_dbg(hw, "Failed to read, error %x\n", error); 718 return IXGBE_ERR_PHY; 719 } 720 721 if (!ret) 722 *data = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA); 723 724 out: 725 hw->mac.ops.release_swfw_sync(hw, gssr); 726 return ret; 727 } 728 729 /** 730 * ixgbe_get_phy_token - Get the token for shared PHY access 731 * @hw: Pointer to hardware structure 732 */ 733 static s32 ixgbe_get_phy_token(struct ixgbe_hw *hw) 734 { 735 struct ixgbe_hic_phy_token_req token_cmd; 736 s32 status; 737 738 token_cmd.hdr.cmd = FW_PHY_TOKEN_REQ_CMD; 739 token_cmd.hdr.buf_len = FW_PHY_TOKEN_REQ_LEN; 740 token_cmd.hdr.cmd_or_resp.cmd_resv = 0; 741 token_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; 742 token_cmd.port_number = hw->bus.lan_id; 743 token_cmd.command_type = FW_PHY_TOKEN_REQ; 744 token_cmd.pad = 0; 745 status = ixgbe_host_interface_command(hw, &token_cmd, sizeof(token_cmd), 746 IXGBE_HI_COMMAND_TIMEOUT, 747 true); 748 if (status) 749 return status; 750 if (token_cmd.hdr.cmd_or_resp.ret_status == FW_PHY_TOKEN_OK) 751 return 0; 752 if (token_cmd.hdr.cmd_or_resp.ret_status != FW_PHY_TOKEN_RETRY) 753 return IXGBE_ERR_FW_RESP_INVALID; 754 755 return IXGBE_ERR_TOKEN_RETRY; 756 } 757 758 /** 759 * ixgbe_put_phy_token - Put the token for shared PHY access 760 * @hw: Pointer to hardware structure 761 */ 762 static s32 ixgbe_put_phy_token(struct ixgbe_hw *hw) 763 { 764 struct ixgbe_hic_phy_token_req token_cmd; 765 s32 status; 766 767 token_cmd.hdr.cmd = FW_PHY_TOKEN_REQ_CMD; 768 token_cmd.hdr.buf_len = FW_PHY_TOKEN_REQ_LEN; 769 token_cmd.hdr.cmd_or_resp.cmd_resv = 0; 770 token_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; 771 token_cmd.port_number = hw->bus.lan_id; 772 token_cmd.command_type = FW_PHY_TOKEN_REL; 773 token_cmd.pad = 0; 774 status = ixgbe_host_interface_command(hw, &token_cmd, sizeof(token_cmd), 775 IXGBE_HI_COMMAND_TIMEOUT, 776 true); 777 if (status) 778 return status; 779 if (token_cmd.hdr.cmd_or_resp.ret_status == FW_PHY_TOKEN_OK) 780 return 0; 781 return IXGBE_ERR_FW_RESP_INVALID; 782 } 783 784 /** 785 * ixgbe_write_iosf_sb_reg_x550a - Write to IOSF PHY register 786 * @hw: pointer to hardware structure 787 * @reg_addr: 32 bit PHY register to write 788 * @device_type: 3 bit device type 789 * @data: Data to write to the register 790 **/ 791 static s32 ixgbe_write_iosf_sb_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, 792 __always_unused u32 device_type, 793 u32 data) 794 { 795 struct ixgbe_hic_internal_phy_req write_cmd; 796 797 memset(&write_cmd, 0, sizeof(write_cmd)); 798 write_cmd.hdr.cmd = FW_INT_PHY_REQ_CMD; 799 write_cmd.hdr.buf_len = FW_INT_PHY_REQ_LEN; 800 write_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; 801 write_cmd.port_number = hw->bus.lan_id; 802 write_cmd.command_type = FW_INT_PHY_REQ_WRITE; 803 write_cmd.address = cpu_to_be16(reg_addr); 804 write_cmd.write_data = cpu_to_be32(data); 805 806 return ixgbe_host_interface_command(hw, &write_cmd, sizeof(write_cmd), 807 IXGBE_HI_COMMAND_TIMEOUT, false); 808 } 809 810 /** 811 * ixgbe_read_iosf_sb_reg_x550a - Read from IOSF PHY register 812 * @hw: pointer to hardware structure 813 * @reg_addr: 32 bit PHY register to write 814 * @device_type: 3 bit device type 815 * @data: Pointer to read data from the register 816 **/ 817 static s32 ixgbe_read_iosf_sb_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, 818 __always_unused u32 device_type, 819 u32 *data) 820 { 821 union { 822 struct ixgbe_hic_internal_phy_req cmd; 823 struct ixgbe_hic_internal_phy_resp rsp; 824 } hic; 825 s32 status; 826 827 memset(&hic, 0, sizeof(hic)); 828 hic.cmd.hdr.cmd = FW_INT_PHY_REQ_CMD; 829 hic.cmd.hdr.buf_len = FW_INT_PHY_REQ_LEN; 830 hic.cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; 831 hic.cmd.port_number = hw->bus.lan_id; 832 hic.cmd.command_type = FW_INT_PHY_REQ_READ; 833 hic.cmd.address = cpu_to_be16(reg_addr); 834 835 status = ixgbe_host_interface_command(hw, &hic.cmd, sizeof(hic.cmd), 836 IXGBE_HI_COMMAND_TIMEOUT, true); 837 838 /* Extract the register value from the response. */ 839 *data = be32_to_cpu(hic.rsp.read_data); 840 841 return status; 842 } 843 844 /** ixgbe_read_ee_hostif_buffer_X550- Read EEPROM word(s) using hostif 845 * @hw: pointer to hardware structure 846 * @offset: offset of word in the EEPROM to read 847 * @words: number of words 848 * @data: word(s) read from the EEPROM 849 * 850 * Reads a 16 bit word(s) from the EEPROM using the hostif. 851 **/ 852 static s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw, 853 u16 offset, u16 words, u16 *data) 854 { 855 const u32 mask = IXGBE_GSSR_SW_MNG_SM | IXGBE_GSSR_EEP_SM; 856 struct ixgbe_hic_read_shadow_ram buffer; 857 u32 current_word = 0; 858 u16 words_to_read; 859 s32 status; 860 u32 i; 861 862 /* Take semaphore for the entire operation. */ 863 status = hw->mac.ops.acquire_swfw_sync(hw, mask); 864 if (status) { 865 hw_dbg(hw, "EEPROM read buffer - semaphore failed\n"); 866 return status; 867 } 868 869 while (words) { 870 if (words > FW_MAX_READ_BUFFER_SIZE / 2) 871 words_to_read = FW_MAX_READ_BUFFER_SIZE / 2; 872 else 873 words_to_read = words; 874 875 buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD; 876 buffer.hdr.req.buf_lenh = 0; 877 buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN; 878 buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM; 879 880 /* convert offset from words to bytes */ 881 buffer.address = (__force u32)cpu_to_be32((offset + 882 current_word) * 2); 883 buffer.length = (__force u16)cpu_to_be16(words_to_read * 2); 884 buffer.pad2 = 0; 885 buffer.pad3 = 0; 886 887 status = ixgbe_hic_unlocked(hw, (u32 *)&buffer, sizeof(buffer), 888 IXGBE_HI_COMMAND_TIMEOUT); 889 if (status) { 890 hw_dbg(hw, "Host interface command failed\n"); 891 goto out; 892 } 893 894 for (i = 0; i < words_to_read; i++) { 895 u32 reg = IXGBE_FLEX_MNG + (FW_NVM_DATA_OFFSET << 2) + 896 2 * i; 897 u32 value = IXGBE_READ_REG(hw, reg); 898 899 data[current_word] = (u16)(value & 0xffff); 900 current_word++; 901 i++; 902 if (i < words_to_read) { 903 value >>= 16; 904 data[current_word] = (u16)(value & 0xffff); 905 current_word++; 906 } 907 } 908 words -= words_to_read; 909 } 910 911 out: 912 hw->mac.ops.release_swfw_sync(hw, mask); 913 return status; 914 } 915 916 /** ixgbe_checksum_ptr_x550 - Checksum one pointer region 917 * @hw: pointer to hardware structure 918 * @ptr: pointer offset in eeprom 919 * @size: size of section pointed by ptr, if 0 first word will be used as size 920 * @csum: address of checksum to update 921 * 922 * Returns error status for any failure 923 **/ 924 static s32 ixgbe_checksum_ptr_x550(struct ixgbe_hw *hw, u16 ptr, 925 u16 size, u16 *csum, u16 *buffer, 926 u32 buffer_size) 927 { 928 u16 buf[256]; 929 s32 status; 930 u16 length, bufsz, i, start; 931 u16 *local_buffer; 932 933 bufsz = ARRAY_SIZE(buf); 934 935 /* Read a chunk at the pointer location */ 936 if (!buffer) { 937 status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr, bufsz, buf); 938 if (status) { 939 hw_dbg(hw, "Failed to read EEPROM image\n"); 940 return status; 941 } 942 local_buffer = buf; 943 } else { 944 if (buffer_size < ptr) 945 return IXGBE_ERR_PARAM; 946 local_buffer = &buffer[ptr]; 947 } 948 949 if (size) { 950 start = 0; 951 length = size; 952 } else { 953 start = 1; 954 length = local_buffer[0]; 955 956 /* Skip pointer section if length is invalid. */ 957 if (length == 0xFFFF || length == 0 || 958 (ptr + length) >= hw->eeprom.word_size) 959 return 0; 960 } 961 962 if (buffer && ((u32)start + (u32)length > buffer_size)) 963 return IXGBE_ERR_PARAM; 964 965 for (i = start; length; i++, length--) { 966 if (i == bufsz && !buffer) { 967 ptr += bufsz; 968 i = 0; 969 if (length < bufsz) 970 bufsz = length; 971 972 /* Read a chunk at the pointer location */ 973 status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr, 974 bufsz, buf); 975 if (status) { 976 hw_dbg(hw, "Failed to read EEPROM image\n"); 977 return status; 978 } 979 } 980 *csum += local_buffer[i]; 981 } 982 return 0; 983 } 984 985 /** ixgbe_calc_checksum_X550 - Calculates and returns the checksum 986 * @hw: pointer to hardware structure 987 * @buffer: pointer to buffer containing calculated checksum 988 * @buffer_size: size of buffer 989 * 990 * Returns a negative error code on error, or the 16-bit checksum 991 **/ 992 static s32 ixgbe_calc_checksum_X550(struct ixgbe_hw *hw, u16 *buffer, 993 u32 buffer_size) 994 { 995 u16 eeprom_ptrs[IXGBE_EEPROM_LAST_WORD + 1]; 996 u16 *local_buffer; 997 s32 status; 998 u16 checksum = 0; 999 u16 pointer, i, size; 1000 1001 hw->eeprom.ops.init_params(hw); 1002 1003 if (!buffer) { 1004 /* Read pointer area */ 1005 status = ixgbe_read_ee_hostif_buffer_X550(hw, 0, 1006 IXGBE_EEPROM_LAST_WORD + 1, 1007 eeprom_ptrs); 1008 if (status) { 1009 hw_dbg(hw, "Failed to read EEPROM image\n"); 1010 return status; 1011 } 1012 local_buffer = eeprom_ptrs; 1013 } else { 1014 if (buffer_size < IXGBE_EEPROM_LAST_WORD) 1015 return IXGBE_ERR_PARAM; 1016 local_buffer = buffer; 1017 } 1018 1019 /* For X550 hardware include 0x0-0x41 in the checksum, skip the 1020 * checksum word itself 1021 */ 1022 for (i = 0; i <= IXGBE_EEPROM_LAST_WORD; i++) 1023 if (i != IXGBE_EEPROM_CHECKSUM) 1024 checksum += local_buffer[i]; 1025 1026 /* Include all data from pointers 0x3, 0x6-0xE. This excludes the 1027 * FW, PHY module, and PCIe Expansion/Option ROM pointers. 1028 */ 1029 for (i = IXGBE_PCIE_ANALOG_PTR_X550; i < IXGBE_FW_PTR; i++) { 1030 if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR) 1031 continue; 1032 1033 pointer = local_buffer[i]; 1034 1035 /* Skip pointer section if the pointer is invalid. */ 1036 if (pointer == 0xFFFF || pointer == 0 || 1037 pointer >= hw->eeprom.word_size) 1038 continue; 1039 1040 switch (i) { 1041 case IXGBE_PCIE_GENERAL_PTR: 1042 size = IXGBE_IXGBE_PCIE_GENERAL_SIZE; 1043 break; 1044 case IXGBE_PCIE_CONFIG0_PTR: 1045 case IXGBE_PCIE_CONFIG1_PTR: 1046 size = IXGBE_PCIE_CONFIG_SIZE; 1047 break; 1048 default: 1049 size = 0; 1050 break; 1051 } 1052 1053 status = ixgbe_checksum_ptr_x550(hw, pointer, size, &checksum, 1054 buffer, buffer_size); 1055 if (status) 1056 return status; 1057 } 1058 1059 checksum = (u16)IXGBE_EEPROM_SUM - checksum; 1060 1061 return (s32)checksum; 1062 } 1063 1064 /** ixgbe_calc_eeprom_checksum_X550 - Calculates and returns the checksum 1065 * @hw: pointer to hardware structure 1066 * 1067 * Returns a negative error code on error, or the 16-bit checksum 1068 **/ 1069 static s32 ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw) 1070 { 1071 return ixgbe_calc_checksum_X550(hw, NULL, 0); 1072 } 1073 1074 /** ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command 1075 * @hw: pointer to hardware structure 1076 * @offset: offset of word in the EEPROM to read 1077 * @data: word read from the EEPROM 1078 * 1079 * Reads a 16 bit word from the EEPROM using the hostif. 1080 **/ 1081 static s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 *data) 1082 { 1083 const u32 mask = IXGBE_GSSR_SW_MNG_SM | IXGBE_GSSR_EEP_SM; 1084 struct ixgbe_hic_read_shadow_ram buffer; 1085 s32 status; 1086 1087 buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD; 1088 buffer.hdr.req.buf_lenh = 0; 1089 buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN; 1090 buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM; 1091 1092 /* convert offset from words to bytes */ 1093 buffer.address = (__force u32)cpu_to_be32(offset * 2); 1094 /* one word */ 1095 buffer.length = (__force u16)cpu_to_be16(sizeof(u16)); 1096 1097 status = hw->mac.ops.acquire_swfw_sync(hw, mask); 1098 if (status) 1099 return status; 1100 1101 status = ixgbe_hic_unlocked(hw, (u32 *)&buffer, sizeof(buffer), 1102 IXGBE_HI_COMMAND_TIMEOUT); 1103 if (!status) { 1104 *data = (u16)IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, 1105 FW_NVM_DATA_OFFSET); 1106 } 1107 1108 hw->mac.ops.release_swfw_sync(hw, mask); 1109 return status; 1110 } 1111 1112 /** ixgbe_validate_eeprom_checksum_X550 - Validate EEPROM checksum 1113 * @hw: pointer to hardware structure 1114 * @checksum_val: calculated checksum 1115 * 1116 * Performs checksum calculation and validates the EEPROM checksum. If the 1117 * caller does not need checksum_val, the value can be NULL. 1118 **/ 1119 static s32 ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw, 1120 u16 *checksum_val) 1121 { 1122 s32 status; 1123 u16 checksum; 1124 u16 read_checksum = 0; 1125 1126 /* Read the first word from the EEPROM. If this times out or fails, do 1127 * not continue or we could be in for a very long wait while every 1128 * EEPROM read fails 1129 */ 1130 status = hw->eeprom.ops.read(hw, 0, &checksum); 1131 if (status) { 1132 hw_dbg(hw, "EEPROM read failed\n"); 1133 return status; 1134 } 1135 1136 status = hw->eeprom.ops.calc_checksum(hw); 1137 if (status < 0) 1138 return status; 1139 1140 checksum = (u16)(status & 0xffff); 1141 1142 status = ixgbe_read_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM, 1143 &read_checksum); 1144 if (status) 1145 return status; 1146 1147 /* Verify read checksum from EEPROM is the same as 1148 * calculated checksum 1149 */ 1150 if (read_checksum != checksum) { 1151 status = IXGBE_ERR_EEPROM_CHECKSUM; 1152 hw_dbg(hw, "Invalid EEPROM checksum"); 1153 } 1154 1155 /* If the user cares, return the calculated checksum */ 1156 if (checksum_val) 1157 *checksum_val = checksum; 1158 1159 return status; 1160 } 1161 1162 /** ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif 1163 * @hw: pointer to hardware structure 1164 * @offset: offset of word in the EEPROM to write 1165 * @data: word write to the EEPROM 1166 * 1167 * Write a 16 bit word to the EEPROM using the hostif. 1168 **/ 1169 static s32 ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset, 1170 u16 data) 1171 { 1172 s32 status; 1173 struct ixgbe_hic_write_shadow_ram buffer; 1174 1175 buffer.hdr.req.cmd = FW_WRITE_SHADOW_RAM_CMD; 1176 buffer.hdr.req.buf_lenh = 0; 1177 buffer.hdr.req.buf_lenl = FW_WRITE_SHADOW_RAM_LEN; 1178 buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM; 1179 1180 /* one word */ 1181 buffer.length = cpu_to_be16(sizeof(u16)); 1182 buffer.data = data; 1183 buffer.address = cpu_to_be32(offset * 2); 1184 1185 status = ixgbe_host_interface_command(hw, &buffer, sizeof(buffer), 1186 IXGBE_HI_COMMAND_TIMEOUT, false); 1187 return status; 1188 } 1189 1190 /** ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif 1191 * @hw: pointer to hardware structure 1192 * @offset: offset of word in the EEPROM to write 1193 * @data: word write to the EEPROM 1194 * 1195 * Write a 16 bit word to the EEPROM using the hostif. 1196 **/ 1197 static s32 ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 data) 1198 { 1199 s32 status = 0; 1200 1201 if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) { 1202 status = ixgbe_write_ee_hostif_data_X550(hw, offset, data); 1203 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); 1204 } else { 1205 hw_dbg(hw, "write ee hostif failed to get semaphore"); 1206 status = IXGBE_ERR_SWFW_SYNC; 1207 } 1208 1209 return status; 1210 } 1211 1212 /** ixgbe_update_flash_X550 - Instruct HW to copy EEPROM to Flash device 1213 * @hw: pointer to hardware structure 1214 * 1215 * Issue a shadow RAM dump to FW to copy EEPROM from shadow RAM to the flash. 1216 **/ 1217 static s32 ixgbe_update_flash_X550(struct ixgbe_hw *hw) 1218 { 1219 s32 status = 0; 1220 union ixgbe_hic_hdr2 buffer; 1221 1222 buffer.req.cmd = FW_SHADOW_RAM_DUMP_CMD; 1223 buffer.req.buf_lenh = 0; 1224 buffer.req.buf_lenl = FW_SHADOW_RAM_DUMP_LEN; 1225 buffer.req.checksum = FW_DEFAULT_CHECKSUM; 1226 1227 status = ixgbe_host_interface_command(hw, &buffer, sizeof(buffer), 1228 IXGBE_HI_COMMAND_TIMEOUT, false); 1229 return status; 1230 } 1231 1232 /** 1233 * ixgbe_get_bus_info_X550em - Set PCI bus info 1234 * @hw: pointer to hardware structure 1235 * 1236 * Sets bus link width and speed to unknown because X550em is 1237 * not a PCI device. 1238 **/ 1239 static s32 ixgbe_get_bus_info_X550em(struct ixgbe_hw *hw) 1240 { 1241 hw->bus.type = ixgbe_bus_type_internal; 1242 hw->bus.width = ixgbe_bus_width_unknown; 1243 hw->bus.speed = ixgbe_bus_speed_unknown; 1244 1245 hw->mac.ops.set_lan_id(hw); 1246 1247 return 0; 1248 } 1249 1250 /** 1251 * ixgbe_fw_recovery_mode_X550 - Check FW NVM recovery mode 1252 * @hw: pointer t hardware structure 1253 * 1254 * Returns true if in FW NVM recovery mode. 1255 */ 1256 static bool ixgbe_fw_recovery_mode_X550(struct ixgbe_hw *hw) 1257 { 1258 u32 fwsm; 1259 1260 fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM(hw)); 1261 return !!(fwsm & IXGBE_FWSM_FW_NVM_RECOVERY_MODE); 1262 } 1263 1264 /** ixgbe_disable_rx_x550 - Disable RX unit 1265 * 1266 * Enables the Rx DMA unit for x550 1267 **/ 1268 static void ixgbe_disable_rx_x550(struct ixgbe_hw *hw) 1269 { 1270 u32 rxctrl, pfdtxgswc; 1271 s32 status; 1272 struct ixgbe_hic_disable_rxen fw_cmd; 1273 1274 rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); 1275 if (rxctrl & IXGBE_RXCTRL_RXEN) { 1276 pfdtxgswc = IXGBE_READ_REG(hw, IXGBE_PFDTXGSWC); 1277 if (pfdtxgswc & IXGBE_PFDTXGSWC_VT_LBEN) { 1278 pfdtxgswc &= ~IXGBE_PFDTXGSWC_VT_LBEN; 1279 IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, pfdtxgswc); 1280 hw->mac.set_lben = true; 1281 } else { 1282 hw->mac.set_lben = false; 1283 } 1284 1285 fw_cmd.hdr.cmd = FW_DISABLE_RXEN_CMD; 1286 fw_cmd.hdr.buf_len = FW_DISABLE_RXEN_LEN; 1287 fw_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; 1288 fw_cmd.port_number = hw->bus.lan_id; 1289 1290 status = ixgbe_host_interface_command(hw, &fw_cmd, 1291 sizeof(struct ixgbe_hic_disable_rxen), 1292 IXGBE_HI_COMMAND_TIMEOUT, true); 1293 1294 /* If we fail - disable RX using register write */ 1295 if (status) { 1296 rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); 1297 if (rxctrl & IXGBE_RXCTRL_RXEN) { 1298 rxctrl &= ~IXGBE_RXCTRL_RXEN; 1299 IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl); 1300 } 1301 } 1302 } 1303 } 1304 1305 /** ixgbe_update_eeprom_checksum_X550 - Updates the EEPROM checksum and flash 1306 * @hw: pointer to hardware structure 1307 * 1308 * After writing EEPROM to shadow RAM using EEWR register, software calculates 1309 * checksum and updates the EEPROM and instructs the hardware to update 1310 * the flash. 1311 **/ 1312 static s32 ixgbe_update_eeprom_checksum_X550(struct ixgbe_hw *hw) 1313 { 1314 s32 status; 1315 u16 checksum = 0; 1316 1317 /* Read the first word from the EEPROM. If this times out or fails, do 1318 * not continue or we could be in for a very long wait while every 1319 * EEPROM read fails 1320 */ 1321 status = ixgbe_read_ee_hostif_X550(hw, 0, &checksum); 1322 if (status) { 1323 hw_dbg(hw, "EEPROM read failed\n"); 1324 return status; 1325 } 1326 1327 status = ixgbe_calc_eeprom_checksum_X550(hw); 1328 if (status < 0) 1329 return status; 1330 1331 checksum = (u16)(status & 0xffff); 1332 1333 status = ixgbe_write_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM, 1334 checksum); 1335 if (status) 1336 return status; 1337 1338 status = ixgbe_update_flash_X550(hw); 1339 1340 return status; 1341 } 1342 1343 /** ixgbe_write_ee_hostif_buffer_X550 - Write EEPROM word(s) using hostif 1344 * @hw: pointer to hardware structure 1345 * @offset: offset of word in the EEPROM to write 1346 * @words: number of words 1347 * @data: word(s) write to the EEPROM 1348 * 1349 * 1350 * Write a 16 bit word(s) to the EEPROM using the hostif. 1351 **/ 1352 static s32 ixgbe_write_ee_hostif_buffer_X550(struct ixgbe_hw *hw, 1353 u16 offset, u16 words, 1354 u16 *data) 1355 { 1356 s32 status = 0; 1357 u32 i = 0; 1358 1359 /* Take semaphore for the entire operation. */ 1360 status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM); 1361 if (status) { 1362 hw_dbg(hw, "EEPROM write buffer - semaphore failed\n"); 1363 return status; 1364 } 1365 1366 for (i = 0; i < words; i++) { 1367 status = ixgbe_write_ee_hostif_data_X550(hw, offset + i, 1368 data[i]); 1369 if (status) { 1370 hw_dbg(hw, "Eeprom buffered write failed\n"); 1371 break; 1372 } 1373 } 1374 1375 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); 1376 1377 return status; 1378 } 1379 1380 /** ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register of the 1381 * IOSF device 1382 * 1383 * @hw: pointer to hardware structure 1384 * @reg_addr: 32 bit PHY register to write 1385 * @device_type: 3 bit device type 1386 * @data: Data to write to the register 1387 **/ 1388 static s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr, 1389 u32 device_type, u32 data) 1390 { 1391 u32 gssr = IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_PHY0_SM; 1392 u32 command, error; 1393 s32 ret; 1394 1395 ret = hw->mac.ops.acquire_swfw_sync(hw, gssr); 1396 if (ret) 1397 return ret; 1398 1399 ret = ixgbe_iosf_wait(hw, NULL); 1400 if (ret) 1401 goto out; 1402 1403 command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) | 1404 (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT)); 1405 1406 /* Write IOSF control register */ 1407 IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command); 1408 1409 /* Write IOSF data register */ 1410 IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA, data); 1411 1412 ret = ixgbe_iosf_wait(hw, &command); 1413 1414 if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) { 1415 error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >> 1416 IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT; 1417 hw_dbg(hw, "Failed to write, error %x\n", error); 1418 return IXGBE_ERR_PHY; 1419 } 1420 1421 out: 1422 hw->mac.ops.release_swfw_sync(hw, gssr); 1423 return ret; 1424 } 1425 1426 /** 1427 * ixgbe_setup_ixfi_x550em_x - MAC specific iXFI configuration 1428 * @hw: pointer to hardware structure 1429 * 1430 * iXfI configuration needed for ixgbe_mac_X550EM_x devices. 1431 **/ 1432 static s32 ixgbe_setup_ixfi_x550em_x(struct ixgbe_hw *hw) 1433 { 1434 s32 status; 1435 u32 reg_val; 1436 1437 /* Disable training protocol FSM. */ 1438 status = ixgbe_read_iosf_sb_reg_x550(hw, 1439 IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), 1440 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); 1441 if (status) 1442 return status; 1443 1444 reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_CONV_WO_PROTOCOL; 1445 status = ixgbe_write_iosf_sb_reg_x550(hw, 1446 IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), 1447 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); 1448 if (status) 1449 return status; 1450 1451 /* Disable Flex from training TXFFE. */ 1452 status = ixgbe_read_iosf_sb_reg_x550(hw, 1453 IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id), 1454 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); 1455 if (status) 1456 return status; 1457 1458 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN; 1459 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN; 1460 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN; 1461 status = ixgbe_write_iosf_sb_reg_x550(hw, 1462 IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id), 1463 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); 1464 if (status) 1465 return status; 1466 1467 status = ixgbe_read_iosf_sb_reg_x550(hw, 1468 IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id), 1469 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); 1470 if (status) 1471 return status; 1472 1473 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN; 1474 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN; 1475 reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN; 1476 status = ixgbe_write_iosf_sb_reg_x550(hw, 1477 IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id), 1478 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); 1479 if (status) 1480 return status; 1481 1482 /* Enable override for coefficients. */ 1483 status = ixgbe_read_iosf_sb_reg_x550(hw, 1484 IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id), 1485 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); 1486 if (status) 1487 return status; 1488 1489 reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_OVRRD_EN; 1490 reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN; 1491 reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CPLUS1_OVRRD_EN; 1492 reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CMINUS1_OVRRD_EN; 1493 status = ixgbe_write_iosf_sb_reg_x550(hw, 1494 IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id), 1495 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); 1496 return status; 1497 } 1498 1499 /** 1500 * ixgbe_restart_an_internal_phy_x550em - restart autonegotiation for the 1501 * internal PHY 1502 * @hw: pointer to hardware structure 1503 **/ 1504 static s32 ixgbe_restart_an_internal_phy_x550em(struct ixgbe_hw *hw) 1505 { 1506 s32 status; 1507 u32 link_ctrl; 1508 1509 /* Restart auto-negotiation. */ 1510 status = hw->mac.ops.read_iosf_sb_reg(hw, 1511 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), 1512 IXGBE_SB_IOSF_TARGET_KR_PHY, &link_ctrl); 1513 1514 if (status) { 1515 hw_dbg(hw, "Auto-negotiation did not complete\n"); 1516 return status; 1517 } 1518 1519 link_ctrl |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART; 1520 status = hw->mac.ops.write_iosf_sb_reg(hw, 1521 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), 1522 IXGBE_SB_IOSF_TARGET_KR_PHY, link_ctrl); 1523 1524 if (hw->mac.type == ixgbe_mac_x550em_a) { 1525 u32 flx_mask_st20; 1526 1527 /* Indicate to FW that AN restart has been asserted */ 1528 status = hw->mac.ops.read_iosf_sb_reg(hw, 1529 IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), 1530 IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_mask_st20); 1531 1532 if (status) { 1533 hw_dbg(hw, "Auto-negotiation did not complete\n"); 1534 return status; 1535 } 1536 1537 flx_mask_st20 |= IXGBE_KRM_PMD_FLX_MASK_ST20_FW_AN_RESTART; 1538 status = hw->mac.ops.write_iosf_sb_reg(hw, 1539 IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), 1540 IXGBE_SB_IOSF_TARGET_KR_PHY, flx_mask_st20); 1541 } 1542 1543 return status; 1544 } 1545 1546 /** ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode. 1547 * @hw: pointer to hardware structure 1548 * @speed: the link speed to force 1549 * 1550 * Configures the integrated KR PHY to use iXFI mode. Used to connect an 1551 * internal and external PHY at a specific speed, without autonegotiation. 1552 **/ 1553 static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed) 1554 { 1555 struct ixgbe_mac_info *mac = &hw->mac; 1556 s32 status; 1557 u32 reg_val; 1558 1559 /* iXFI is only supported with X552 */ 1560 if (mac->type != ixgbe_mac_X550EM_x) 1561 return IXGBE_ERR_LINK_SETUP; 1562 1563 /* Disable AN and force speed to 10G Serial. */ 1564 status = ixgbe_read_iosf_sb_reg_x550(hw, 1565 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), 1566 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); 1567 if (status) 1568 return status; 1569 1570 reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; 1571 reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK; 1572 1573 /* Select forced link speed for internal PHY. */ 1574 switch (*speed) { 1575 case IXGBE_LINK_SPEED_10GB_FULL: 1576 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G; 1577 break; 1578 case IXGBE_LINK_SPEED_1GB_FULL: 1579 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G; 1580 break; 1581 default: 1582 /* Other link speeds are not supported by internal KR PHY. */ 1583 return IXGBE_ERR_LINK_SETUP; 1584 } 1585 1586 status = ixgbe_write_iosf_sb_reg_x550(hw, 1587 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), 1588 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); 1589 if (status) 1590 return status; 1591 1592 /* Additional configuration needed for x550em_x */ 1593 if (hw->mac.type == ixgbe_mac_X550EM_x) { 1594 status = ixgbe_setup_ixfi_x550em_x(hw); 1595 if (status) 1596 return status; 1597 } 1598 1599 /* Toggle port SW reset by AN reset. */ 1600 status = ixgbe_restart_an_internal_phy_x550em(hw); 1601 1602 return status; 1603 } 1604 1605 /** 1606 * ixgbe_supported_sfp_modules_X550em - Check if SFP module type is supported 1607 * @hw: pointer to hardware structure 1608 * @linear: true if SFP module is linear 1609 */ 1610 static s32 ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw *hw, bool *linear) 1611 { 1612 switch (hw->phy.sfp_type) { 1613 case ixgbe_sfp_type_not_present: 1614 return IXGBE_ERR_SFP_NOT_PRESENT; 1615 case ixgbe_sfp_type_da_cu_core0: 1616 case ixgbe_sfp_type_da_cu_core1: 1617 *linear = true; 1618 break; 1619 case ixgbe_sfp_type_srlr_core0: 1620 case ixgbe_sfp_type_srlr_core1: 1621 case ixgbe_sfp_type_da_act_lmt_core0: 1622 case ixgbe_sfp_type_da_act_lmt_core1: 1623 case ixgbe_sfp_type_1g_sx_core0: 1624 case ixgbe_sfp_type_1g_sx_core1: 1625 case ixgbe_sfp_type_1g_lx_core0: 1626 case ixgbe_sfp_type_1g_lx_core1: 1627 *linear = false; 1628 break; 1629 case ixgbe_sfp_type_unknown: 1630 case ixgbe_sfp_type_1g_cu_core0: 1631 case ixgbe_sfp_type_1g_cu_core1: 1632 default: 1633 return IXGBE_ERR_SFP_NOT_SUPPORTED; 1634 } 1635 1636 return 0; 1637 } 1638 1639 /** 1640 * ixgbe_setup_mac_link_sfp_x550em - Configure the KR PHY for SFP. 1641 * @hw: pointer to hardware structure 1642 * @speed: the link speed to force 1643 * @autoneg_wait_to_complete: unused 1644 * 1645 * Configures the extern PHY and the integrated KR PHY for SFP support. 1646 */ 1647 static s32 1648 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw, 1649 ixgbe_link_speed speed, 1650 __always_unused bool autoneg_wait_to_complete) 1651 { 1652 s32 status; 1653 u16 reg_slice, reg_val; 1654 bool setup_linear = false; 1655 1656 /* Check if SFP module is supported and linear */ 1657 status = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear); 1658 1659 /* If no SFP module present, then return success. Return success since 1660 * there is no reason to configure CS4227 and SFP not present error is 1661 * not accepted in the setup MAC link flow. 1662 */ 1663 if (status == IXGBE_ERR_SFP_NOT_PRESENT) 1664 return 0; 1665 1666 if (status) 1667 return status; 1668 1669 /* Configure internal PHY for KR/KX. */ 1670 ixgbe_setup_kr_speed_x550em(hw, speed); 1671 1672 /* Configure CS4227 LINE side to proper mode. */ 1673 reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + (hw->bus.lan_id << 12); 1674 if (setup_linear) 1675 reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1; 1676 else 1677 reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1; 1678 1679 status = hw->link.ops.write_link(hw, hw->link.addr, reg_slice, 1680 reg_val); 1681 1682 return status; 1683 } 1684 1685 /** 1686 * ixgbe_setup_sfi_x550a - Configure the internal PHY for native SFI mode 1687 * @hw: pointer to hardware structure 1688 * @speed: the link speed to force 1689 * 1690 * Configures the integrated PHY for native SFI mode. Used to connect the 1691 * internal PHY directly to an SFP cage, without autonegotiation. 1692 **/ 1693 static s32 ixgbe_setup_sfi_x550a(struct ixgbe_hw *hw, ixgbe_link_speed *speed) 1694 { 1695 struct ixgbe_mac_info *mac = &hw->mac; 1696 s32 status; 1697 u32 reg_val; 1698 1699 /* Disable all AN and force speed to 10G Serial. */ 1700 status = mac->ops.read_iosf_sb_reg(hw, 1701 IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), 1702 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); 1703 if (status) 1704 return status; 1705 1706 reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN; 1707 reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN; 1708 reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN; 1709 reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK; 1710 1711 /* Select forced link speed for internal PHY. */ 1712 switch (*speed) { 1713 case IXGBE_LINK_SPEED_10GB_FULL: 1714 reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_10G; 1715 break; 1716 case IXGBE_LINK_SPEED_1GB_FULL: 1717 reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_1G; 1718 break; 1719 default: 1720 /* Other link speeds are not supported by internal PHY. */ 1721 return IXGBE_ERR_LINK_SETUP; 1722 } 1723 1724 status = mac->ops.write_iosf_sb_reg(hw, 1725 IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), 1726 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); 1727 1728 /* Toggle port SW reset by AN reset. */ 1729 status = ixgbe_restart_an_internal_phy_x550em(hw); 1730 1731 return status; 1732 } 1733 1734 /** 1735 * ixgbe_setup_mac_link_sfp_n - Setup internal PHY for native SFP 1736 * @hw: pointer to hardware structure 1737 * @speed: link speed 1738 * @autoneg_wait_to_complete: unused 1739 * 1740 * Configure the integrated PHY for native SFP support. 1741 */ 1742 static s32 1743 ixgbe_setup_mac_link_sfp_n(struct ixgbe_hw *hw, ixgbe_link_speed speed, 1744 __always_unused bool autoneg_wait_to_complete) 1745 { 1746 bool setup_linear = false; 1747 u32 reg_phy_int; 1748 s32 ret_val; 1749 1750 /* Check if SFP module is supported and linear */ 1751 ret_val = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear); 1752 1753 /* If no SFP module present, then return success. Return success since 1754 * SFP not present error is not excepted in the setup MAC link flow. 1755 */ 1756 if (ret_val == IXGBE_ERR_SFP_NOT_PRESENT) 1757 return 0; 1758 1759 if (ret_val) 1760 return ret_val; 1761 1762 /* Configure internal PHY for native SFI based on module type */ 1763 ret_val = hw->mac.ops.read_iosf_sb_reg(hw, 1764 IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), 1765 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_phy_int); 1766 if (ret_val) 1767 return ret_val; 1768 1769 reg_phy_int &= IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_DA; 1770 if (!setup_linear) 1771 reg_phy_int |= IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_SR; 1772 1773 ret_val = hw->mac.ops.write_iosf_sb_reg(hw, 1774 IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), 1775 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_phy_int); 1776 if (ret_val) 1777 return ret_val; 1778 1779 /* Setup SFI internal link. */ 1780 return ixgbe_setup_sfi_x550a(hw, &speed); 1781 } 1782 1783 /** 1784 * ixgbe_setup_mac_link_sfp_x550a - Setup internal PHY for SFP 1785 * @hw: pointer to hardware structure 1786 * @speed: link speed 1787 * @autoneg_wait_to_complete: unused 1788 * 1789 * Configure the integrated PHY for SFP support. 1790 */ 1791 static s32 1792 ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw, ixgbe_link_speed speed, 1793 __always_unused bool autoneg_wait_to_complete) 1794 { 1795 u32 reg_slice, slice_offset; 1796 bool setup_linear = false; 1797 u16 reg_phy_ext; 1798 s32 ret_val; 1799 1800 /* Check if SFP module is supported and linear */ 1801 ret_val = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear); 1802 1803 /* If no SFP module present, then return success. Return success since 1804 * SFP not present error is not excepted in the setup MAC link flow. 1805 */ 1806 if (ret_val == IXGBE_ERR_SFP_NOT_PRESENT) 1807 return 0; 1808 1809 if (ret_val) 1810 return ret_val; 1811 1812 /* Configure internal PHY for KR/KX. */ 1813 ixgbe_setup_kr_speed_x550em(hw, speed); 1814 1815 if (hw->phy.mdio.prtad == MDIO_PRTAD_NONE) 1816 return IXGBE_ERR_PHY_ADDR_INVALID; 1817 1818 /* Get external PHY SKU id */ 1819 ret_val = hw->phy.ops.read_reg(hw, IXGBE_CS4227_EFUSE_PDF_SKU, 1820 IXGBE_MDIO_ZERO_DEV_TYPE, ®_phy_ext); 1821 if (ret_val) 1822 return ret_val; 1823 1824 /* When configuring quad port CS4223, the MAC instance is part 1825 * of the slice offset. 1826 */ 1827 if (reg_phy_ext == IXGBE_CS4223_SKU_ID) 1828 slice_offset = (hw->bus.lan_id + 1829 (hw->bus.instance_id << 1)) << 12; 1830 else 1831 slice_offset = hw->bus.lan_id << 12; 1832 1833 /* Configure CS4227/CS4223 LINE side to proper mode. */ 1834 reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + slice_offset; 1835 1836 ret_val = hw->phy.ops.read_reg(hw, reg_slice, 1837 IXGBE_MDIO_ZERO_DEV_TYPE, ®_phy_ext); 1838 if (ret_val) 1839 return ret_val; 1840 1841 reg_phy_ext &= ~((IXGBE_CS4227_EDC_MODE_CX1 << 1) | 1842 (IXGBE_CS4227_EDC_MODE_SR << 1)); 1843 1844 if (setup_linear) 1845 reg_phy_ext |= (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 1; 1846 else 1847 reg_phy_ext |= (IXGBE_CS4227_EDC_MODE_SR << 1) | 1; 1848 1849 ret_val = hw->phy.ops.write_reg(hw, reg_slice, 1850 IXGBE_MDIO_ZERO_DEV_TYPE, reg_phy_ext); 1851 if (ret_val) 1852 return ret_val; 1853 1854 /* Flush previous write with a read */ 1855 return hw->phy.ops.read_reg(hw, reg_slice, 1856 IXGBE_MDIO_ZERO_DEV_TYPE, ®_phy_ext); 1857 } 1858 1859 /** 1860 * ixgbe_setup_mac_link_t_X550em - Sets the auto advertised link speed 1861 * @hw: pointer to hardware structure 1862 * @speed: new link speed 1863 * @autoneg_wait: true when waiting for completion is needed 1864 * 1865 * Setup internal/external PHY link speed based on link speed, then set 1866 * external PHY auto advertised link speed. 1867 * 1868 * Returns error status for any failure 1869 **/ 1870 static s32 ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw, 1871 ixgbe_link_speed speed, 1872 bool autoneg_wait) 1873 { 1874 s32 status; 1875 ixgbe_link_speed force_speed; 1876 1877 /* Setup internal/external PHY link speed to iXFI (10G), unless 1878 * only 1G is auto advertised then setup KX link. 1879 */ 1880 if (speed & IXGBE_LINK_SPEED_10GB_FULL) 1881 force_speed = IXGBE_LINK_SPEED_10GB_FULL; 1882 else 1883 force_speed = IXGBE_LINK_SPEED_1GB_FULL; 1884 1885 /* If X552 and internal link mode is XFI, then setup XFI internal link. 1886 */ 1887 if (hw->mac.type == ixgbe_mac_X550EM_x && 1888 !(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) { 1889 status = ixgbe_setup_ixfi_x550em(hw, &force_speed); 1890 1891 if (status) 1892 return status; 1893 } 1894 1895 return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait); 1896 } 1897 1898 /** ixgbe_check_link_t_X550em - Determine link and speed status 1899 * @hw: pointer to hardware structure 1900 * @speed: pointer to link speed 1901 * @link_up: true when link is up 1902 * @link_up_wait_to_complete: bool used to wait for link up or not 1903 * 1904 * Check that both the MAC and X557 external PHY have link. 1905 **/ 1906 static s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw, 1907 ixgbe_link_speed *speed, 1908 bool *link_up, 1909 bool link_up_wait_to_complete) 1910 { 1911 u32 status; 1912 u16 i, autoneg_status; 1913 1914 if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper) 1915 return IXGBE_ERR_CONFIG; 1916 1917 status = ixgbe_check_mac_link_generic(hw, speed, link_up, 1918 link_up_wait_to_complete); 1919 1920 /* If check link fails or MAC link is not up, then return */ 1921 if (status || !(*link_up)) 1922 return status; 1923 1924 /* MAC link is up, so check external PHY link. 1925 * Link status is latching low, and can only be used to detect link 1926 * drop, and not the current status of the link without performing 1927 * back-to-back reads. 1928 */ 1929 for (i = 0; i < 2; i++) { 1930 status = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN, 1931 &autoneg_status); 1932 1933 if (status) 1934 return status; 1935 } 1936 1937 /* If external PHY link is not up, then indicate link not up */ 1938 if (!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS)) 1939 *link_up = false; 1940 1941 return 0; 1942 } 1943 1944 /** 1945 * ixgbe_setup_sgmii - Set up link for sgmii 1946 * @hw: pointer to hardware structure 1947 * @speed: unused 1948 * @autoneg_wait_to_complete: unused 1949 */ 1950 static s32 1951 ixgbe_setup_sgmii(struct ixgbe_hw *hw, __always_unused ixgbe_link_speed speed, 1952 __always_unused bool autoneg_wait_to_complete) 1953 { 1954 struct ixgbe_mac_info *mac = &hw->mac; 1955 u32 lval, sval, flx_val; 1956 s32 rc; 1957 1958 rc = mac->ops.read_iosf_sb_reg(hw, 1959 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), 1960 IXGBE_SB_IOSF_TARGET_KR_PHY, &lval); 1961 if (rc) 1962 return rc; 1963 1964 lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; 1965 lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK; 1966 lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_SGMII_EN; 1967 lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CLAUSE_37_EN; 1968 lval |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G; 1969 rc = mac->ops.write_iosf_sb_reg(hw, 1970 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), 1971 IXGBE_SB_IOSF_TARGET_KR_PHY, lval); 1972 if (rc) 1973 return rc; 1974 1975 rc = mac->ops.read_iosf_sb_reg(hw, 1976 IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id), 1977 IXGBE_SB_IOSF_TARGET_KR_PHY, &sval); 1978 if (rc) 1979 return rc; 1980 1981 sval |= IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_10_D; 1982 sval |= IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_100_D; 1983 rc = mac->ops.write_iosf_sb_reg(hw, 1984 IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id), 1985 IXGBE_SB_IOSF_TARGET_KR_PHY, sval); 1986 if (rc) 1987 return rc; 1988 1989 rc = mac->ops.read_iosf_sb_reg(hw, 1990 IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), 1991 IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_val); 1992 if (rc) 1993 return rc; 1994 1995 rc = mac->ops.read_iosf_sb_reg(hw, 1996 IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), 1997 IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_val); 1998 if (rc) 1999 return rc; 2000 2001 flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK; 2002 flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_1G; 2003 flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN; 2004 flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN; 2005 flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN; 2006 2007 rc = mac->ops.write_iosf_sb_reg(hw, 2008 IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), 2009 IXGBE_SB_IOSF_TARGET_KR_PHY, flx_val); 2010 if (rc) 2011 return rc; 2012 2013 rc = ixgbe_restart_an_internal_phy_x550em(hw); 2014 return rc; 2015 } 2016 2017 /** 2018 * ixgbe_setup_sgmii_fw - Set up link for sgmii with firmware-controlled PHYs 2019 * @hw: pointer to hardware structure 2020 * @speed: the link speed to force 2021 * @autoneg_wait: true when waiting for completion is needed 2022 */ 2023 static s32 ixgbe_setup_sgmii_fw(struct ixgbe_hw *hw, ixgbe_link_speed speed, 2024 bool autoneg_wait) 2025 { 2026 struct ixgbe_mac_info *mac = &hw->mac; 2027 u32 lval, sval, flx_val; 2028 s32 rc; 2029 2030 rc = mac->ops.read_iosf_sb_reg(hw, 2031 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), 2032 IXGBE_SB_IOSF_TARGET_KR_PHY, &lval); 2033 if (rc) 2034 return rc; 2035 2036 lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; 2037 lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK; 2038 lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_SGMII_EN; 2039 lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CLAUSE_37_EN; 2040 lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G; 2041 rc = mac->ops.write_iosf_sb_reg(hw, 2042 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), 2043 IXGBE_SB_IOSF_TARGET_KR_PHY, lval); 2044 if (rc) 2045 return rc; 2046 2047 rc = mac->ops.read_iosf_sb_reg(hw, 2048 IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id), 2049 IXGBE_SB_IOSF_TARGET_KR_PHY, &sval); 2050 if (rc) 2051 return rc; 2052 2053 sval &= ~IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_10_D; 2054 sval &= ~IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_100_D; 2055 rc = mac->ops.write_iosf_sb_reg(hw, 2056 IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id), 2057 IXGBE_SB_IOSF_TARGET_KR_PHY, sval); 2058 if (rc) 2059 return rc; 2060 2061 rc = mac->ops.write_iosf_sb_reg(hw, 2062 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), 2063 IXGBE_SB_IOSF_TARGET_KR_PHY, lval); 2064 if (rc) 2065 return rc; 2066 2067 rc = mac->ops.read_iosf_sb_reg(hw, 2068 IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), 2069 IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_val); 2070 if (rc) 2071 return rc; 2072 2073 flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK; 2074 flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_AN; 2075 flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN; 2076 flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN; 2077 flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN; 2078 2079 rc = mac->ops.write_iosf_sb_reg(hw, 2080 IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), 2081 IXGBE_SB_IOSF_TARGET_KR_PHY, flx_val); 2082 if (rc) 2083 return rc; 2084 2085 ixgbe_restart_an_internal_phy_x550em(hw); 2086 2087 return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait); 2088 } 2089 2090 /** 2091 * ixgbe_fc_autoneg_sgmii_x550em_a - Enable flow control IEEE clause 37 2092 * @hw: pointer to hardware structure 2093 * 2094 * Enable flow control according to IEEE clause 37. 2095 */ 2096 static void ixgbe_fc_autoneg_sgmii_x550em_a(struct ixgbe_hw *hw) 2097 { 2098 s32 status = IXGBE_ERR_FC_NOT_NEGOTIATED; 2099 u32 info[FW_PHY_ACT_DATA_COUNT] = { 0 }; 2100 ixgbe_link_speed speed; 2101 bool link_up; 2102 2103 /* AN should have completed when the cable was plugged in. 2104 * Look for reasons to bail out. Bail out if: 2105 * - FC autoneg is disabled, or if 2106 * - link is not up. 2107 */ 2108 if (hw->fc.disable_fc_autoneg) 2109 goto out; 2110 2111 hw->mac.ops.check_link(hw, &speed, &link_up, false); 2112 if (!link_up) 2113 goto out; 2114 2115 /* Check if auto-negotiation has completed */ 2116 status = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_LINK_INFO, &info); 2117 if (status || !(info[0] & FW_PHY_ACT_GET_LINK_INFO_AN_COMPLETE)) { 2118 status = IXGBE_ERR_FC_NOT_NEGOTIATED; 2119 goto out; 2120 } 2121 2122 /* Negotiate the flow control */ 2123 status = ixgbe_negotiate_fc(hw, info[0], info[0], 2124 FW_PHY_ACT_GET_LINK_INFO_FC_RX, 2125 FW_PHY_ACT_GET_LINK_INFO_FC_TX, 2126 FW_PHY_ACT_GET_LINK_INFO_LP_FC_RX, 2127 FW_PHY_ACT_GET_LINK_INFO_LP_FC_TX); 2128 2129 out: 2130 if (!status) { 2131 hw->fc.fc_was_autonegged = true; 2132 } else { 2133 hw->fc.fc_was_autonegged = false; 2134 hw->fc.current_mode = hw->fc.requested_mode; 2135 } 2136 } 2137 2138 /** ixgbe_init_mac_link_ops_X550em_a - Init mac link function pointers 2139 * @hw: pointer to hardware structure 2140 **/ 2141 static void ixgbe_init_mac_link_ops_X550em_a(struct ixgbe_hw *hw) 2142 { 2143 struct ixgbe_mac_info *mac = &hw->mac; 2144 2145 switch (mac->ops.get_media_type(hw)) { 2146 case ixgbe_media_type_fiber: 2147 mac->ops.setup_fc = NULL; 2148 mac->ops.fc_autoneg = ixgbe_fc_autoneg_fiber_x550em_a; 2149 break; 2150 case ixgbe_media_type_copper: 2151 if (hw->device_id != IXGBE_DEV_ID_X550EM_A_1G_T && 2152 hw->device_id != IXGBE_DEV_ID_X550EM_A_1G_T_L) { 2153 mac->ops.setup_link = ixgbe_setup_mac_link_t_X550em; 2154 break; 2155 } 2156 mac->ops.fc_autoneg = ixgbe_fc_autoneg_sgmii_x550em_a; 2157 mac->ops.setup_fc = ixgbe_fc_autoneg_fw; 2158 mac->ops.setup_link = ixgbe_setup_sgmii_fw; 2159 mac->ops.check_link = ixgbe_check_mac_link_generic; 2160 break; 2161 case ixgbe_media_type_backplane: 2162 mac->ops.fc_autoneg = ixgbe_fc_autoneg_backplane_x550em_a; 2163 mac->ops.setup_fc = ixgbe_setup_fc_backplane_x550em_a; 2164 break; 2165 default: 2166 break; 2167 } 2168 } 2169 2170 /** ixgbe_init_mac_link_ops_X550em - init mac link function pointers 2171 * @hw: pointer to hardware structure 2172 **/ 2173 static void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw) 2174 { 2175 struct ixgbe_mac_info *mac = &hw->mac; 2176 2177 mac->ops.setup_fc = ixgbe_setup_fc_x550em; 2178 2179 switch (mac->ops.get_media_type(hw)) { 2180 case ixgbe_media_type_fiber: 2181 /* CS4227 does not support autoneg, so disable the laser control 2182 * functions for SFP+ fiber 2183 */ 2184 mac->ops.disable_tx_laser = NULL; 2185 mac->ops.enable_tx_laser = NULL; 2186 mac->ops.flap_tx_laser = NULL; 2187 mac->ops.setup_link = ixgbe_setup_mac_link_multispeed_fiber; 2188 switch (hw->device_id) { 2189 case IXGBE_DEV_ID_X550EM_A_SFP_N: 2190 mac->ops.setup_mac_link = ixgbe_setup_mac_link_sfp_n; 2191 break; 2192 case IXGBE_DEV_ID_X550EM_A_SFP: 2193 mac->ops.setup_mac_link = 2194 ixgbe_setup_mac_link_sfp_x550a; 2195 break; 2196 default: 2197 mac->ops.setup_mac_link = 2198 ixgbe_setup_mac_link_sfp_x550em; 2199 break; 2200 } 2201 mac->ops.set_rate_select_speed = 2202 ixgbe_set_soft_rate_select_speed; 2203 break; 2204 case ixgbe_media_type_copper: 2205 if (hw->device_id == IXGBE_DEV_ID_X550EM_X_1G_T) 2206 break; 2207 mac->ops.setup_link = ixgbe_setup_mac_link_t_X550em; 2208 mac->ops.setup_fc = ixgbe_setup_fc_generic; 2209 mac->ops.check_link = ixgbe_check_link_t_X550em; 2210 break; 2211 case ixgbe_media_type_backplane: 2212 if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII || 2213 hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII_L) 2214 mac->ops.setup_link = ixgbe_setup_sgmii; 2215 break; 2216 default: 2217 break; 2218 } 2219 2220 /* Additional modification for X550em_a devices */ 2221 if (hw->mac.type == ixgbe_mac_x550em_a) 2222 ixgbe_init_mac_link_ops_X550em_a(hw); 2223 } 2224 2225 /** ixgbe_setup_sfp_modules_X550em - Setup SFP module 2226 * @hw: pointer to hardware structure 2227 */ 2228 static s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw) 2229 { 2230 s32 status; 2231 bool linear; 2232 2233 /* Check if SFP module is supported */ 2234 status = ixgbe_supported_sfp_modules_X550em(hw, &linear); 2235 if (status) 2236 return status; 2237 2238 ixgbe_init_mac_link_ops_X550em(hw); 2239 hw->phy.ops.reset = NULL; 2240 2241 return 0; 2242 } 2243 2244 /** ixgbe_get_link_capabilities_x550em - Determines link capabilities 2245 * @hw: pointer to hardware structure 2246 * @speed: pointer to link speed 2247 * @autoneg: true when autoneg or autotry is enabled 2248 **/ 2249 static s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw, 2250 ixgbe_link_speed *speed, 2251 bool *autoneg) 2252 { 2253 if (hw->phy.type == ixgbe_phy_fw) { 2254 *autoneg = true; 2255 *speed = hw->phy.speeds_supported; 2256 return 0; 2257 } 2258 2259 /* SFP */ 2260 if (hw->phy.media_type == ixgbe_media_type_fiber) { 2261 /* CS4227 SFP must not enable auto-negotiation */ 2262 *autoneg = false; 2263 2264 if (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || 2265 hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1 || 2266 hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 || 2267 hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1) { 2268 *speed = IXGBE_LINK_SPEED_1GB_FULL; 2269 return 0; 2270 } 2271 2272 /* Link capabilities are based on SFP */ 2273 if (hw->phy.multispeed_fiber) 2274 *speed = IXGBE_LINK_SPEED_10GB_FULL | 2275 IXGBE_LINK_SPEED_1GB_FULL; 2276 else 2277 *speed = IXGBE_LINK_SPEED_10GB_FULL; 2278 } else { 2279 switch (hw->phy.type) { 2280 case ixgbe_phy_x550em_kx4: 2281 *speed = IXGBE_LINK_SPEED_1GB_FULL | 2282 IXGBE_LINK_SPEED_2_5GB_FULL | 2283 IXGBE_LINK_SPEED_10GB_FULL; 2284 break; 2285 case ixgbe_phy_x550em_xfi: 2286 *speed = IXGBE_LINK_SPEED_1GB_FULL | 2287 IXGBE_LINK_SPEED_10GB_FULL; 2288 break; 2289 case ixgbe_phy_ext_1g_t: 2290 case ixgbe_phy_sgmii: 2291 *speed = IXGBE_LINK_SPEED_1GB_FULL; 2292 break; 2293 case ixgbe_phy_x550em_kr: 2294 if (hw->mac.type == ixgbe_mac_x550em_a) { 2295 /* check different backplane modes */ 2296 if (hw->phy.nw_mng_if_sel & 2297 IXGBE_NW_MNG_IF_SEL_PHY_SPEED_2_5G) { 2298 *speed = IXGBE_LINK_SPEED_2_5GB_FULL; 2299 break; 2300 } else if (hw->device_id == 2301 IXGBE_DEV_ID_X550EM_A_KR_L) { 2302 *speed = IXGBE_LINK_SPEED_1GB_FULL; 2303 break; 2304 } 2305 } 2306 fallthrough; 2307 default: 2308 *speed = IXGBE_LINK_SPEED_10GB_FULL | 2309 IXGBE_LINK_SPEED_1GB_FULL; 2310 break; 2311 } 2312 *autoneg = true; 2313 } 2314 return 0; 2315 } 2316 2317 /** 2318 * ixgbe_get_lasi_ext_t_x550em - Determime external Base T PHY interrupt cause 2319 * @hw: pointer to hardware structure 2320 * @lsc: pointer to boolean flag which indicates whether external Base T 2321 * PHY interrupt is lsc 2322 * 2323 * Determime if external Base T PHY interrupt cause is high temperature 2324 * failure alarm or link status change. 2325 * 2326 * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature 2327 * failure alarm, else return PHY access status. 2328 **/ 2329 static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc) 2330 { 2331 u32 status; 2332 u16 reg; 2333 2334 *lsc = false; 2335 2336 /* Vendor alarm triggered */ 2337 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG, 2338 MDIO_MMD_VEND1, 2339 ®); 2340 2341 if (status || !(reg & IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN)) 2342 return status; 2343 2344 /* Vendor Auto-Neg alarm triggered or Global alarm 1 triggered */ 2345 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_FLAG, 2346 MDIO_MMD_VEND1, 2347 ®); 2348 2349 if (status || !(reg & (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN | 2350 IXGBE_MDIO_GLOBAL_ALARM_1_INT))) 2351 return status; 2352 2353 /* Global alarm triggered */ 2354 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_ALARM_1, 2355 MDIO_MMD_VEND1, 2356 ®); 2357 2358 if (status) 2359 return status; 2360 2361 /* If high temperature failure, then return over temp error and exit */ 2362 if (reg & IXGBE_MDIO_GLOBAL_ALM_1_HI_TMP_FAIL) { 2363 /* power down the PHY in case the PHY FW didn't already */ 2364 ixgbe_set_copper_phy_power(hw, false); 2365 return IXGBE_ERR_OVERTEMP; 2366 } 2367 if (reg & IXGBE_MDIO_GLOBAL_ALM_1_DEV_FAULT) { 2368 /* device fault alarm triggered */ 2369 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_FAULT_MSG, 2370 MDIO_MMD_VEND1, 2371 ®); 2372 if (status) 2373 return status; 2374 2375 /* if device fault was due to high temp alarm handle and exit */ 2376 if (reg == IXGBE_MDIO_GLOBAL_FAULT_MSG_HI_TMP) { 2377 /* power down the PHY in case the PHY FW didn't */ 2378 ixgbe_set_copper_phy_power(hw, false); 2379 return IXGBE_ERR_OVERTEMP; 2380 } 2381 } 2382 2383 /* Vendor alarm 2 triggered */ 2384 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG, 2385 MDIO_MMD_AN, ®); 2386 2387 if (status || !(reg & IXGBE_MDIO_GLOBAL_STD_ALM2_INT)) 2388 return status; 2389 2390 /* link connect/disconnect event occurred */ 2391 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM2, 2392 MDIO_MMD_AN, ®); 2393 2394 if (status) 2395 return status; 2396 2397 /* Indicate LSC */ 2398 if (reg & IXGBE_MDIO_AUTO_NEG_VEN_LSC) 2399 *lsc = true; 2400 2401 return 0; 2402 } 2403 2404 /** 2405 * ixgbe_enable_lasi_ext_t_x550em - Enable external Base T PHY interrupts 2406 * @hw: pointer to hardware structure 2407 * 2408 * Enable link status change and temperature failure alarm for the external 2409 * Base T PHY 2410 * 2411 * Returns PHY access status 2412 **/ 2413 static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw) 2414 { 2415 u32 status; 2416 u16 reg; 2417 bool lsc; 2418 2419 /* Clear interrupt flags */ 2420 status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc); 2421 2422 /* Enable link status change alarm */ 2423 2424 /* Enable the LASI interrupts on X552 devices to receive notifications 2425 * of the link configurations of the external PHY and correspondingly 2426 * support the configuration of the internal iXFI link, since iXFI does 2427 * not support auto-negotiation. This is not required for X553 devices 2428 * having KR support, which performs auto-negotiations and which is used 2429 * as the internal link to the external PHY. Hence adding a check here 2430 * to avoid enabling LASI interrupts for X553 devices. 2431 */ 2432 if (hw->mac.type != ixgbe_mac_x550em_a) { 2433 status = hw->phy.ops.read_reg(hw, 2434 IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK, 2435 MDIO_MMD_AN, ®); 2436 if (status) 2437 return status; 2438 2439 reg |= IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN; 2440 2441 status = hw->phy.ops.write_reg(hw, 2442 IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK, 2443 MDIO_MMD_AN, reg); 2444 if (status) 2445 return status; 2446 } 2447 2448 /* Enable high temperature failure and global fault alarms */ 2449 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK, 2450 MDIO_MMD_VEND1, 2451 ®); 2452 if (status) 2453 return status; 2454 2455 reg |= (IXGBE_MDIO_GLOBAL_INT_HI_TEMP_EN | 2456 IXGBE_MDIO_GLOBAL_INT_DEV_FAULT_EN); 2457 2458 status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK, 2459 MDIO_MMD_VEND1, 2460 reg); 2461 if (status) 2462 return status; 2463 2464 /* Enable vendor Auto-Neg alarm and Global Interrupt Mask 1 alarm */ 2465 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK, 2466 MDIO_MMD_VEND1, 2467 ®); 2468 if (status) 2469 return status; 2470 2471 reg |= (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN | 2472 IXGBE_MDIO_GLOBAL_ALARM_1_INT); 2473 2474 status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK, 2475 MDIO_MMD_VEND1, 2476 reg); 2477 if (status) 2478 return status; 2479 2480 /* Enable chip-wide vendor alarm */ 2481 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK, 2482 MDIO_MMD_VEND1, 2483 ®); 2484 if (status) 2485 return status; 2486 2487 reg |= IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN; 2488 2489 status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK, 2490 MDIO_MMD_VEND1, 2491 reg); 2492 2493 return status; 2494 } 2495 2496 /** 2497 * ixgbe_handle_lasi_ext_t_x550em - Handle external Base T PHY interrupt 2498 * @hw: pointer to hardware structure 2499 * 2500 * Handle external Base T PHY interrupt. If high temperature 2501 * failure alarm then return error, else if link status change 2502 * then setup internal/external PHY link 2503 * 2504 * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature 2505 * failure alarm, else return PHY access status. 2506 **/ 2507 static s32 ixgbe_handle_lasi_ext_t_x550em(struct ixgbe_hw *hw) 2508 { 2509 struct ixgbe_phy_info *phy = &hw->phy; 2510 bool lsc; 2511 u32 status; 2512 2513 status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc); 2514 if (status) 2515 return status; 2516 2517 if (lsc && phy->ops.setup_internal_link) 2518 return phy->ops.setup_internal_link(hw); 2519 2520 return 0; 2521 } 2522 2523 /** 2524 * ixgbe_setup_kr_speed_x550em - Configure the KR PHY for link speed. 2525 * @hw: pointer to hardware structure 2526 * @speed: link speed 2527 * 2528 * Configures the integrated KR PHY. 2529 **/ 2530 static s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *hw, 2531 ixgbe_link_speed speed) 2532 { 2533 s32 status; 2534 u32 reg_val; 2535 2536 status = hw->mac.ops.read_iosf_sb_reg(hw, 2537 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), 2538 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); 2539 if (status) 2540 return status; 2541 2542 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; 2543 reg_val &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR | 2544 IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX); 2545 2546 /* Advertise 10G support. */ 2547 if (speed & IXGBE_LINK_SPEED_10GB_FULL) 2548 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR; 2549 2550 /* Advertise 1G support. */ 2551 if (speed & IXGBE_LINK_SPEED_1GB_FULL) 2552 reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX; 2553 2554 status = hw->mac.ops.write_iosf_sb_reg(hw, 2555 IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), 2556 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); 2557 2558 if (hw->mac.type == ixgbe_mac_x550em_a) { 2559 /* Set lane mode to KR auto negotiation */ 2560 status = hw->mac.ops.read_iosf_sb_reg(hw, 2561 IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), 2562 IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); 2563 2564 if (status) 2565 return status; 2566 2567 reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK; 2568 reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_AN; 2569 reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN; 2570 reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN; 2571 reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN; 2572 2573 status = hw->mac.ops.write_iosf_sb_reg(hw, 2574 IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), 2575 IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); 2576 } 2577 2578 return ixgbe_restart_an_internal_phy_x550em(hw); 2579 } 2580 2581 /** 2582 * ixgbe_setup_kr_x550em - Configure the KR PHY 2583 * @hw: pointer to hardware structure 2584 **/ 2585 static s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw) 2586 { 2587 /* leave link alone for 2.5G */ 2588 if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_2_5GB_FULL) 2589 return 0; 2590 2591 if (ixgbe_check_reset_blocked(hw)) 2592 return 0; 2593 2594 return ixgbe_setup_kr_speed_x550em(hw, hw->phy.autoneg_advertised); 2595 } 2596 2597 /** ixgbe_ext_phy_t_x550em_get_link - Get ext phy link status 2598 * @hw: address of hardware structure 2599 * @link_up: address of boolean to indicate link status 2600 * 2601 * Returns error code if unable to get link status. 2602 **/ 2603 static s32 ixgbe_ext_phy_t_x550em_get_link(struct ixgbe_hw *hw, bool *link_up) 2604 { 2605 u32 ret; 2606 u16 autoneg_status; 2607 2608 *link_up = false; 2609 2610 /* read this twice back to back to indicate current status */ 2611 ret = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN, 2612 &autoneg_status); 2613 if (ret) 2614 return ret; 2615 2616 ret = hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN, 2617 &autoneg_status); 2618 if (ret) 2619 return ret; 2620 2621 *link_up = !!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS); 2622 2623 return 0; 2624 } 2625 2626 /** ixgbe_setup_internal_phy_t_x550em - Configure KR PHY to X557 link 2627 * @hw: point to hardware structure 2628 * 2629 * Configures the link between the integrated KR PHY and the external X557 PHY 2630 * The driver will call this function when it gets a link status change 2631 * interrupt from the X557 PHY. This function configures the link speed 2632 * between the PHYs to match the link speed of the BASE-T link. 2633 * 2634 * A return of a non-zero value indicates an error, and the base driver should 2635 * not report link up. 2636 **/ 2637 static s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw) 2638 { 2639 ixgbe_link_speed force_speed; 2640 bool link_up; 2641 u32 status; 2642 u16 speed; 2643 2644 if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper) 2645 return IXGBE_ERR_CONFIG; 2646 2647 if (!(hw->mac.type == ixgbe_mac_X550EM_x && 2648 !(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE))) { 2649 speed = IXGBE_LINK_SPEED_10GB_FULL | 2650 IXGBE_LINK_SPEED_1GB_FULL; 2651 return ixgbe_setup_kr_speed_x550em(hw, speed); 2652 } 2653 2654 /* If link is not up, then there is no setup necessary so return */ 2655 status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); 2656 if (status) 2657 return status; 2658 2659 if (!link_up) 2660 return 0; 2661 2662 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT, 2663 MDIO_MMD_AN, 2664 &speed); 2665 if (status) 2666 return status; 2667 2668 /* If link is not still up, then no setup is necessary so return */ 2669 status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); 2670 if (status) 2671 return status; 2672 2673 if (!link_up) 2674 return 0; 2675 2676 /* clear everything but the speed and duplex bits */ 2677 speed &= IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK; 2678 2679 switch (speed) { 2680 case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL: 2681 force_speed = IXGBE_LINK_SPEED_10GB_FULL; 2682 break; 2683 case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL: 2684 force_speed = IXGBE_LINK_SPEED_1GB_FULL; 2685 break; 2686 default: 2687 /* Internal PHY does not support anything else */ 2688 return IXGBE_ERR_INVALID_LINK_SETTINGS; 2689 } 2690 2691 return ixgbe_setup_ixfi_x550em(hw, &force_speed); 2692 } 2693 2694 /** ixgbe_reset_phy_t_X550em - Performs X557 PHY reset and enables LASI 2695 * @hw: pointer to hardware structure 2696 **/ 2697 static s32 ixgbe_reset_phy_t_X550em(struct ixgbe_hw *hw) 2698 { 2699 s32 status; 2700 2701 status = ixgbe_reset_phy_generic(hw); 2702 2703 if (status) 2704 return status; 2705 2706 /* Configure Link Status Alarm and Temperature Threshold interrupts */ 2707 return ixgbe_enable_lasi_ext_t_x550em(hw); 2708 } 2709 2710 /** 2711 * ixgbe_led_on_t_x550em - Turns on the software controllable LEDs. 2712 * @hw: pointer to hardware structure 2713 * @led_idx: led number to turn on 2714 **/ 2715 static s32 ixgbe_led_on_t_x550em(struct ixgbe_hw *hw, u32 led_idx) 2716 { 2717 u16 phy_data; 2718 2719 if (led_idx >= IXGBE_X557_MAX_LED_INDEX) 2720 return IXGBE_ERR_PARAM; 2721 2722 /* To turn on the LED, set mode to ON. */ 2723 hw->phy.ops.read_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx, 2724 MDIO_MMD_VEND1, &phy_data); 2725 phy_data |= IXGBE_X557_LED_MANUAL_SET_MASK; 2726 hw->phy.ops.write_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx, 2727 MDIO_MMD_VEND1, phy_data); 2728 2729 return 0; 2730 } 2731 2732 /** 2733 * ixgbe_led_off_t_x550em - Turns off the software controllable LEDs. 2734 * @hw: pointer to hardware structure 2735 * @led_idx: led number to turn off 2736 **/ 2737 static s32 ixgbe_led_off_t_x550em(struct ixgbe_hw *hw, u32 led_idx) 2738 { 2739 u16 phy_data; 2740 2741 if (led_idx >= IXGBE_X557_MAX_LED_INDEX) 2742 return IXGBE_ERR_PARAM; 2743 2744 /* To turn on the LED, set mode to ON. */ 2745 hw->phy.ops.read_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx, 2746 MDIO_MMD_VEND1, &phy_data); 2747 phy_data &= ~IXGBE_X557_LED_MANUAL_SET_MASK; 2748 hw->phy.ops.write_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx, 2749 MDIO_MMD_VEND1, phy_data); 2750 2751 return 0; 2752 } 2753 2754 /** 2755 * ixgbe_set_fw_drv_ver_x550 - Sends driver version to firmware 2756 * @hw: pointer to the HW structure 2757 * @maj: driver version major number 2758 * @min: driver version minor number 2759 * @build: driver version build number 2760 * @sub: driver version sub build number 2761 * @len: length of driver_ver string 2762 * @driver_ver: driver string 2763 * 2764 * Sends driver version number to firmware through the manageability 2765 * block. On success return 0 2766 * else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring 2767 * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails. 2768 **/ 2769 static s32 ixgbe_set_fw_drv_ver_x550(struct ixgbe_hw *hw, u8 maj, u8 min, 2770 u8 build, u8 sub, u16 len, 2771 const char *driver_ver) 2772 { 2773 struct ixgbe_hic_drv_info2 fw_cmd; 2774 s32 ret_val; 2775 int i; 2776 2777 if (!len || !driver_ver || (len > sizeof(fw_cmd.driver_string))) 2778 return IXGBE_ERR_INVALID_ARGUMENT; 2779 2780 fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO; 2781 fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN + len; 2782 fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED; 2783 fw_cmd.port_num = (u8)hw->bus.func; 2784 fw_cmd.ver_maj = maj; 2785 fw_cmd.ver_min = min; 2786 fw_cmd.ver_build = build; 2787 fw_cmd.ver_sub = sub; 2788 fw_cmd.hdr.checksum = 0; 2789 memcpy(fw_cmd.driver_string, driver_ver, len); 2790 fw_cmd.hdr.checksum = ixgbe_calculate_checksum((u8 *)&fw_cmd, 2791 (FW_CEM_HDR_LEN + fw_cmd.hdr.buf_len)); 2792 2793 for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) { 2794 ret_val = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd, 2795 sizeof(fw_cmd), 2796 IXGBE_HI_COMMAND_TIMEOUT, 2797 true); 2798 if (ret_val) 2799 continue; 2800 2801 if (fw_cmd.hdr.cmd_or_resp.ret_status != 2802 FW_CEM_RESP_STATUS_SUCCESS) 2803 return IXGBE_ERR_HOST_INTERFACE_COMMAND; 2804 return 0; 2805 } 2806 2807 return ret_val; 2808 } 2809 2810 /** ixgbe_get_lcd_x550em - Determine lowest common denominator 2811 * @hw: pointer to hardware structure 2812 * @lcd_speed: pointer to lowest common link speed 2813 * 2814 * Determine lowest common link speed with link partner. 2815 **/ 2816 static s32 ixgbe_get_lcd_t_x550em(struct ixgbe_hw *hw, 2817 ixgbe_link_speed *lcd_speed) 2818 { 2819 u16 an_lp_status; 2820 s32 status; 2821 u16 word = hw->eeprom.ctrl_word_3; 2822 2823 *lcd_speed = IXGBE_LINK_SPEED_UNKNOWN; 2824 2825 status = hw->phy.ops.read_reg(hw, IXGBE_AUTO_NEG_LP_STATUS, 2826 MDIO_MMD_AN, 2827 &an_lp_status); 2828 if (status) 2829 return status; 2830 2831 /* If link partner advertised 1G, return 1G */ 2832 if (an_lp_status & IXGBE_AUTO_NEG_LP_1000BASE_CAP) { 2833 *lcd_speed = IXGBE_LINK_SPEED_1GB_FULL; 2834 return status; 2835 } 2836 2837 /* If 10G disabled for LPLU via NVM D10GMP, then return no valid LCD */ 2838 if ((hw->bus.lan_id && (word & NVM_INIT_CTRL_3_D10GMP_PORT1)) || 2839 (word & NVM_INIT_CTRL_3_D10GMP_PORT0)) 2840 return status; 2841 2842 /* Link partner not capable of lower speeds, return 10G */ 2843 *lcd_speed = IXGBE_LINK_SPEED_10GB_FULL; 2844 return status; 2845 } 2846 2847 /** 2848 * ixgbe_setup_fc_x550em - Set up flow control 2849 * @hw: pointer to hardware structure 2850 */ 2851 static s32 ixgbe_setup_fc_x550em(struct ixgbe_hw *hw) 2852 { 2853 bool pause, asm_dir; 2854 u32 reg_val; 2855 s32 rc = 0; 2856 2857 /* Validate the requested mode */ 2858 if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) { 2859 hw_err(hw, "ixgbe_fc_rx_pause not valid in strict IEEE mode\n"); 2860 return IXGBE_ERR_INVALID_LINK_SETTINGS; 2861 } 2862 2863 /* 10gig parts do not have a word in the EEPROM to determine the 2864 * default flow control setting, so we explicitly set it to full. 2865 */ 2866 if (hw->fc.requested_mode == ixgbe_fc_default) 2867 hw->fc.requested_mode = ixgbe_fc_full; 2868 2869 /* Determine PAUSE and ASM_DIR bits. */ 2870 switch (hw->fc.requested_mode) { 2871 case ixgbe_fc_none: 2872 pause = false; 2873 asm_dir = false; 2874 break; 2875 case ixgbe_fc_tx_pause: 2876 pause = false; 2877 asm_dir = true; 2878 break; 2879 case ixgbe_fc_rx_pause: 2880 /* Rx Flow control is enabled and Tx Flow control is 2881 * disabled by software override. Since there really 2882 * isn't a way to advertise that we are capable of RX 2883 * Pause ONLY, we will advertise that we support both 2884 * symmetric and asymmetric Rx PAUSE, as such we fall 2885 * through to the fc_full statement. Later, we will 2886 * disable the adapter's ability to send PAUSE frames. 2887 */ 2888 fallthrough; 2889 case ixgbe_fc_full: 2890 pause = true; 2891 asm_dir = true; 2892 break; 2893 default: 2894 hw_err(hw, "Flow control param set incorrectly\n"); 2895 return IXGBE_ERR_CONFIG; 2896 } 2897 2898 switch (hw->device_id) { 2899 case IXGBE_DEV_ID_X550EM_X_KR: 2900 case IXGBE_DEV_ID_X550EM_A_KR: 2901 case IXGBE_DEV_ID_X550EM_A_KR_L: 2902 rc = hw->mac.ops.read_iosf_sb_reg(hw, 2903 IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), 2904 IXGBE_SB_IOSF_TARGET_KR_PHY, 2905 ®_val); 2906 if (rc) 2907 return rc; 2908 2909 reg_val &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE | 2910 IXGBE_KRM_AN_CNTL_1_ASM_PAUSE); 2911 if (pause) 2912 reg_val |= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE; 2913 if (asm_dir) 2914 reg_val |= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE; 2915 rc = hw->mac.ops.write_iosf_sb_reg(hw, 2916 IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), 2917 IXGBE_SB_IOSF_TARGET_KR_PHY, 2918 reg_val); 2919 2920 /* This device does not fully support AN. */ 2921 hw->fc.disable_fc_autoneg = true; 2922 break; 2923 case IXGBE_DEV_ID_X550EM_X_XFI: 2924 hw->fc.disable_fc_autoneg = true; 2925 break; 2926 default: 2927 break; 2928 } 2929 return rc; 2930 } 2931 2932 /** 2933 * ixgbe_fc_autoneg_backplane_x550em_a - Enable flow control IEEE clause 37 2934 * @hw: pointer to hardware structure 2935 **/ 2936 static void ixgbe_fc_autoneg_backplane_x550em_a(struct ixgbe_hw *hw) 2937 { 2938 u32 link_s1, lp_an_page_low, an_cntl_1; 2939 s32 status = IXGBE_ERR_FC_NOT_NEGOTIATED; 2940 ixgbe_link_speed speed; 2941 bool link_up; 2942 2943 /* AN should have completed when the cable was plugged in. 2944 * Look for reasons to bail out. Bail out if: 2945 * - FC autoneg is disabled, or if 2946 * - link is not up. 2947 */ 2948 if (hw->fc.disable_fc_autoneg) { 2949 hw_err(hw, "Flow control autoneg is disabled"); 2950 goto out; 2951 } 2952 2953 hw->mac.ops.check_link(hw, &speed, &link_up, false); 2954 if (!link_up) { 2955 hw_err(hw, "The link is down"); 2956 goto out; 2957 } 2958 2959 /* Check at auto-negotiation has completed */ 2960 status = hw->mac.ops.read_iosf_sb_reg(hw, 2961 IXGBE_KRM_LINK_S1(hw->bus.lan_id), 2962 IXGBE_SB_IOSF_TARGET_KR_PHY, &link_s1); 2963 2964 if (status || (link_s1 & IXGBE_KRM_LINK_S1_MAC_AN_COMPLETE) == 0) { 2965 hw_dbg(hw, "Auto-Negotiation did not complete\n"); 2966 status = IXGBE_ERR_FC_NOT_NEGOTIATED; 2967 goto out; 2968 } 2969 2970 /* Read the 10g AN autoc and LP ability registers and resolve 2971 * local flow control settings accordingly 2972 */ 2973 status = hw->mac.ops.read_iosf_sb_reg(hw, 2974 IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), 2975 IXGBE_SB_IOSF_TARGET_KR_PHY, &an_cntl_1); 2976 2977 if (status) { 2978 hw_dbg(hw, "Auto-Negotiation did not complete\n"); 2979 goto out; 2980 } 2981 2982 status = hw->mac.ops.read_iosf_sb_reg(hw, 2983 IXGBE_KRM_LP_BASE_PAGE_HIGH(hw->bus.lan_id), 2984 IXGBE_SB_IOSF_TARGET_KR_PHY, &lp_an_page_low); 2985 2986 if (status) { 2987 hw_dbg(hw, "Auto-Negotiation did not complete\n"); 2988 goto out; 2989 } 2990 2991 status = ixgbe_negotiate_fc(hw, an_cntl_1, lp_an_page_low, 2992 IXGBE_KRM_AN_CNTL_1_SYM_PAUSE, 2993 IXGBE_KRM_AN_CNTL_1_ASM_PAUSE, 2994 IXGBE_KRM_LP_BASE_PAGE_HIGH_SYM_PAUSE, 2995 IXGBE_KRM_LP_BASE_PAGE_HIGH_ASM_PAUSE); 2996 2997 out: 2998 if (!status) { 2999 hw->fc.fc_was_autonegged = true; 3000 } else { 3001 hw->fc.fc_was_autonegged = false; 3002 hw->fc.current_mode = hw->fc.requested_mode; 3003 } 3004 } 3005 3006 /** 3007 * ixgbe_fc_autoneg_fiber_x550em_a - passthrough FC settings 3008 * @hw: pointer to hardware structure 3009 **/ 3010 static void ixgbe_fc_autoneg_fiber_x550em_a(struct ixgbe_hw *hw) 3011 { 3012 hw->fc.fc_was_autonegged = false; 3013 hw->fc.current_mode = hw->fc.requested_mode; 3014 } 3015 3016 /** ixgbe_enter_lplu_x550em - Transition to low power states 3017 * @hw: pointer to hardware structure 3018 * 3019 * Configures Low Power Link Up on transition to low power states 3020 * (from D0 to non-D0). Link is required to enter LPLU so avoid resetting 3021 * the X557 PHY immediately prior to entering LPLU. 3022 **/ 3023 static s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw) 3024 { 3025 u16 an_10g_cntl_reg, autoneg_reg, speed; 3026 s32 status; 3027 ixgbe_link_speed lcd_speed; 3028 u32 save_autoneg; 3029 bool link_up; 3030 3031 /* If blocked by MNG FW, then don't restart AN */ 3032 if (ixgbe_check_reset_blocked(hw)) 3033 return 0; 3034 3035 status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); 3036 if (status) 3037 return status; 3038 3039 status = hw->eeprom.ops.read(hw, NVM_INIT_CTRL_3, 3040 &hw->eeprom.ctrl_word_3); 3041 if (status) 3042 return status; 3043 3044 /* If link is down, LPLU disabled in NVM, WoL disabled, or 3045 * manageability disabled, then force link down by entering 3046 * low power mode. 3047 */ 3048 if (!link_up || !(hw->eeprom.ctrl_word_3 & NVM_INIT_CTRL_3_LPLU) || 3049 !(hw->wol_enabled || ixgbe_mng_present(hw))) 3050 return ixgbe_set_copper_phy_power(hw, false); 3051 3052 /* Determine LCD */ 3053 status = ixgbe_get_lcd_t_x550em(hw, &lcd_speed); 3054 if (status) 3055 return status; 3056 3057 /* If no valid LCD link speed, then force link down and exit. */ 3058 if (lcd_speed == IXGBE_LINK_SPEED_UNKNOWN) 3059 return ixgbe_set_copper_phy_power(hw, false); 3060 3061 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT, 3062 MDIO_MMD_AN, 3063 &speed); 3064 if (status) 3065 return status; 3066 3067 /* If no link now, speed is invalid so take link down */ 3068 status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); 3069 if (status) 3070 return ixgbe_set_copper_phy_power(hw, false); 3071 3072 /* clear everything but the speed bits */ 3073 speed &= IXGBE_MDIO_AUTO_NEG_VEN_STAT_SPEED_MASK; 3074 3075 /* If current speed is already LCD, then exit. */ 3076 if (((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB) && 3077 (lcd_speed == IXGBE_LINK_SPEED_1GB_FULL)) || 3078 ((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB) && 3079 (lcd_speed == IXGBE_LINK_SPEED_10GB_FULL))) 3080 return status; 3081 3082 /* Clear AN completed indication */ 3083 status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM, 3084 MDIO_MMD_AN, 3085 &autoneg_reg); 3086 if (status) 3087 return status; 3088 3089 status = hw->phy.ops.read_reg(hw, MDIO_AN_10GBT_CTRL, 3090 MDIO_MMD_AN, 3091 &an_10g_cntl_reg); 3092 if (status) 3093 return status; 3094 3095 status = hw->phy.ops.read_reg(hw, 3096 IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG, 3097 MDIO_MMD_AN, 3098 &autoneg_reg); 3099 if (status) 3100 return status; 3101 3102 save_autoneg = hw->phy.autoneg_advertised; 3103 3104 /* Setup link at least common link speed */ 3105 status = hw->mac.ops.setup_link(hw, lcd_speed, false); 3106 3107 /* restore autoneg from before setting lplu speed */ 3108 hw->phy.autoneg_advertised = save_autoneg; 3109 3110 return status; 3111 } 3112 3113 /** 3114 * ixgbe_reset_phy_fw - Reset firmware-controlled PHYs 3115 * @hw: pointer to hardware structure 3116 */ 3117 static s32 ixgbe_reset_phy_fw(struct ixgbe_hw *hw) 3118 { 3119 u32 store[FW_PHY_ACT_DATA_COUNT] = { 0 }; 3120 s32 rc; 3121 3122 if (hw->phy.reset_disable || ixgbe_check_reset_blocked(hw)) 3123 return 0; 3124 3125 rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_PHY_SW_RESET, &store); 3126 if (rc) 3127 return rc; 3128 memset(store, 0, sizeof(store)); 3129 3130 rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_INIT_PHY, &store); 3131 if (rc) 3132 return rc; 3133 3134 return ixgbe_setup_fw_link(hw); 3135 } 3136 3137 /** 3138 * ixgbe_check_overtemp_fw - Check firmware-controlled PHYs for overtemp 3139 * @hw: pointer to hardware structure 3140 */ 3141 static s32 ixgbe_check_overtemp_fw(struct ixgbe_hw *hw) 3142 { 3143 u32 store[FW_PHY_ACT_DATA_COUNT] = { 0 }; 3144 s32 rc; 3145 3146 rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_LINK_INFO, &store); 3147 if (rc) 3148 return rc; 3149 3150 if (store[0] & FW_PHY_ACT_GET_LINK_INFO_TEMP) { 3151 ixgbe_shutdown_fw_phy(hw); 3152 return IXGBE_ERR_OVERTEMP; 3153 } 3154 return 0; 3155 } 3156 3157 /** 3158 * ixgbe_read_mng_if_sel_x550em - Read NW_MNG_IF_SEL register 3159 * @hw: pointer to hardware structure 3160 * 3161 * Read NW_MNG_IF_SEL register and save field values. 3162 */ 3163 static void ixgbe_read_mng_if_sel_x550em(struct ixgbe_hw *hw) 3164 { 3165 /* Save NW management interface connected on board. This is used 3166 * to determine internal PHY mode. 3167 */ 3168 hw->phy.nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL); 3169 3170 /* If X552 (X550EM_a) and MDIO is connected to external PHY, then set 3171 * PHY address. This register field was has only been used for X552. 3172 */ 3173 if (hw->mac.type == ixgbe_mac_x550em_a && 3174 hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_MDIO_ACT) { 3175 hw->phy.mdio.prtad = (hw->phy.nw_mng_if_sel & 3176 IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD) >> 3177 IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT; 3178 } 3179 } 3180 3181 /** ixgbe_init_phy_ops_X550em - PHY/SFP specific init 3182 * @hw: pointer to hardware structure 3183 * 3184 * Initialize any function pointers that were not able to be 3185 * set during init_shared_code because the PHY/SFP type was 3186 * not known. Perform the SFP init if necessary. 3187 **/ 3188 static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) 3189 { 3190 struct ixgbe_phy_info *phy = &hw->phy; 3191 s32 ret_val; 3192 3193 hw->mac.ops.set_lan_id(hw); 3194 3195 ixgbe_read_mng_if_sel_x550em(hw); 3196 3197 if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) { 3198 phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; 3199 ixgbe_setup_mux_ctl(hw); 3200 } 3201 3202 /* Identify the PHY or SFP module */ 3203 ret_val = phy->ops.identify(hw); 3204 if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED || 3205 ret_val == IXGBE_ERR_PHY_ADDR_INVALID) 3206 return ret_val; 3207 3208 /* Setup function pointers based on detected hardware */ 3209 ixgbe_init_mac_link_ops_X550em(hw); 3210 if (phy->sfp_type != ixgbe_sfp_type_unknown) 3211 phy->ops.reset = NULL; 3212 3213 /* Set functions pointers based on phy type */ 3214 switch (hw->phy.type) { 3215 case ixgbe_phy_x550em_kx4: 3216 phy->ops.setup_link = NULL; 3217 phy->ops.read_reg = ixgbe_read_phy_reg_x550em; 3218 phy->ops.write_reg = ixgbe_write_phy_reg_x550em; 3219 break; 3220 case ixgbe_phy_x550em_kr: 3221 phy->ops.setup_link = ixgbe_setup_kr_x550em; 3222 phy->ops.read_reg = ixgbe_read_phy_reg_x550em; 3223 phy->ops.write_reg = ixgbe_write_phy_reg_x550em; 3224 break; 3225 case ixgbe_phy_x550em_xfi: 3226 /* link is managed by HW */ 3227 phy->ops.setup_link = NULL; 3228 phy->ops.read_reg = ixgbe_read_phy_reg_x550em; 3229 phy->ops.write_reg = ixgbe_write_phy_reg_x550em; 3230 break; 3231 case ixgbe_phy_x550em_ext_t: 3232 /* Save NW management interface connected on board. This is used 3233 * to determine internal PHY mode 3234 */ 3235 phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL); 3236 3237 /* If internal link mode is XFI, then setup iXFI internal link, 3238 * else setup KR now. 3239 */ 3240 phy->ops.setup_internal_link = 3241 ixgbe_setup_internal_phy_t_x550em; 3242 3243 /* setup SW LPLU only for first revision */ 3244 if (hw->mac.type == ixgbe_mac_X550EM_x && 3245 !(IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0)) & 3246 IXGBE_FUSES0_REV_MASK)) 3247 phy->ops.enter_lplu = ixgbe_enter_lplu_t_x550em; 3248 3249 phy->ops.handle_lasi = ixgbe_handle_lasi_ext_t_x550em; 3250 phy->ops.reset = ixgbe_reset_phy_t_X550em; 3251 break; 3252 case ixgbe_phy_sgmii: 3253 phy->ops.setup_link = NULL; 3254 break; 3255 case ixgbe_phy_fw: 3256 phy->ops.setup_link = ixgbe_setup_fw_link; 3257 phy->ops.reset = ixgbe_reset_phy_fw; 3258 break; 3259 case ixgbe_phy_ext_1g_t: 3260 phy->ops.setup_link = NULL; 3261 phy->ops.read_reg = NULL; 3262 phy->ops.write_reg = NULL; 3263 phy->ops.reset = NULL; 3264 break; 3265 default: 3266 break; 3267 } 3268 3269 return ret_val; 3270 } 3271 3272 /** ixgbe_get_media_type_X550em - Get media type 3273 * @hw: pointer to hardware structure 3274 * 3275 * Returns the media type (fiber, copper, backplane) 3276 * 3277 */ 3278 static enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw) 3279 { 3280 enum ixgbe_media_type media_type; 3281 3282 /* Detect if there is a copper PHY attached. */ 3283 switch (hw->device_id) { 3284 case IXGBE_DEV_ID_X550EM_A_SGMII: 3285 case IXGBE_DEV_ID_X550EM_A_SGMII_L: 3286 hw->phy.type = ixgbe_phy_sgmii; 3287 fallthrough; 3288 case IXGBE_DEV_ID_X550EM_X_KR: 3289 case IXGBE_DEV_ID_X550EM_X_KX4: 3290 case IXGBE_DEV_ID_X550EM_X_XFI: 3291 case IXGBE_DEV_ID_X550EM_A_KR: 3292 case IXGBE_DEV_ID_X550EM_A_KR_L: 3293 media_type = ixgbe_media_type_backplane; 3294 break; 3295 case IXGBE_DEV_ID_X550EM_X_SFP: 3296 case IXGBE_DEV_ID_X550EM_A_SFP: 3297 case IXGBE_DEV_ID_X550EM_A_SFP_N: 3298 media_type = ixgbe_media_type_fiber; 3299 break; 3300 case IXGBE_DEV_ID_X550EM_X_1G_T: 3301 case IXGBE_DEV_ID_X550EM_X_10G_T: 3302 case IXGBE_DEV_ID_X550EM_A_10G_T: 3303 case IXGBE_DEV_ID_X550EM_A_1G_T: 3304 case IXGBE_DEV_ID_X550EM_A_1G_T_L: 3305 media_type = ixgbe_media_type_copper; 3306 break; 3307 default: 3308 media_type = ixgbe_media_type_unknown; 3309 break; 3310 } 3311 return media_type; 3312 } 3313 3314 /** ixgbe_init_ext_t_x550em - Start (unstall) the external Base T PHY. 3315 ** @hw: pointer to hardware structure 3316 **/ 3317 static s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw) 3318 { 3319 s32 status; 3320 u16 reg; 3321 3322 status = hw->phy.ops.read_reg(hw, 3323 IXGBE_MDIO_TX_VENDOR_ALARMS_3, 3324 MDIO_MMD_PMAPMD, 3325 ®); 3326 if (status) 3327 return status; 3328 3329 /* If PHY FW reset completed bit is set then this is the first 3330 * SW instance after a power on so the PHY FW must be un-stalled. 3331 */ 3332 if (reg & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) { 3333 status = hw->phy.ops.read_reg(hw, 3334 IXGBE_MDIO_GLOBAL_RES_PR_10, 3335 MDIO_MMD_VEND1, 3336 ®); 3337 if (status) 3338 return status; 3339 3340 reg &= ~IXGBE_MDIO_POWER_UP_STALL; 3341 3342 status = hw->phy.ops.write_reg(hw, 3343 IXGBE_MDIO_GLOBAL_RES_PR_10, 3344 MDIO_MMD_VEND1, 3345 reg); 3346 if (status) 3347 return status; 3348 } 3349 3350 return status; 3351 } 3352 3353 /** 3354 * ixgbe_set_mdio_speed - Set MDIO clock speed 3355 * @hw: pointer to hardware structure 3356 */ 3357 static void ixgbe_set_mdio_speed(struct ixgbe_hw *hw) 3358 { 3359 u32 hlreg0; 3360 3361 switch (hw->device_id) { 3362 case IXGBE_DEV_ID_X550EM_X_10G_T: 3363 case IXGBE_DEV_ID_X550EM_A_SGMII: 3364 case IXGBE_DEV_ID_X550EM_A_SGMII_L: 3365 case IXGBE_DEV_ID_X550EM_A_10G_T: 3366 case IXGBE_DEV_ID_X550EM_A_SFP: 3367 /* Config MDIO clock speed before the first MDIO PHY access */ 3368 hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); 3369 hlreg0 &= ~IXGBE_HLREG0_MDCSPD; 3370 IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); 3371 break; 3372 case IXGBE_DEV_ID_X550EM_A_1G_T: 3373 case IXGBE_DEV_ID_X550EM_A_1G_T_L: 3374 /* Select fast MDIO clock speed for these devices */ 3375 hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); 3376 hlreg0 |= IXGBE_HLREG0_MDCSPD; 3377 IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); 3378 break; 3379 default: 3380 break; 3381 } 3382 } 3383 3384 /** ixgbe_reset_hw_X550em - Perform hardware reset 3385 ** @hw: pointer to hardware structure 3386 ** 3387 ** Resets the hardware by resetting the transmit and receive units, masks 3388 ** and clears all interrupts, perform a PHY reset, and perform a link (MAC) 3389 ** reset. 3390 **/ 3391 static s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw) 3392 { 3393 ixgbe_link_speed link_speed; 3394 s32 status; 3395 u32 ctrl = 0; 3396 u32 i; 3397 bool link_up = false; 3398 u32 swfw_mask = hw->phy.phy_semaphore_mask; 3399 3400 /* Call adapter stop to disable Tx/Rx and clear interrupts */ 3401 status = hw->mac.ops.stop_adapter(hw); 3402 if (status) 3403 return status; 3404 3405 /* flush pending Tx transactions */ 3406 ixgbe_clear_tx_pending(hw); 3407 3408 /* set MDIO speed before talking to the PHY in case it's the 1st time */ 3409 ixgbe_set_mdio_speed(hw); 3410 3411 /* PHY ops must be identified and initialized prior to reset */ 3412 status = hw->phy.ops.init(hw); 3413 if (status == IXGBE_ERR_SFP_NOT_SUPPORTED || 3414 status == IXGBE_ERR_PHY_ADDR_INVALID) 3415 return status; 3416 3417 /* start the external PHY */ 3418 if (hw->phy.type == ixgbe_phy_x550em_ext_t) { 3419 status = ixgbe_init_ext_t_x550em(hw); 3420 if (status) 3421 return status; 3422 } 3423 3424 /* Setup SFP module if there is one present. */ 3425 if (hw->phy.sfp_setup_needed) { 3426 status = hw->mac.ops.setup_sfp(hw); 3427 hw->phy.sfp_setup_needed = false; 3428 } 3429 3430 if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) 3431 return status; 3432 3433 /* Reset PHY */ 3434 if (!hw->phy.reset_disable && hw->phy.ops.reset) 3435 hw->phy.ops.reset(hw); 3436 3437 mac_reset_top: 3438 /* Issue global reset to the MAC. Needs to be SW reset if link is up. 3439 * If link reset is used when link is up, it might reset the PHY when 3440 * mng is using it. If link is down or the flag to force full link 3441 * reset is set, then perform link reset. 3442 */ 3443 ctrl = IXGBE_CTRL_LNK_RST; 3444 3445 if (!hw->force_full_reset) { 3446 hw->mac.ops.check_link(hw, &link_speed, &link_up, false); 3447 if (link_up) 3448 ctrl = IXGBE_CTRL_RST; 3449 } 3450 3451 status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); 3452 if (status) { 3453 hw_dbg(hw, "semaphore failed with %d", status); 3454 return IXGBE_ERR_SWFW_SYNC; 3455 } 3456 3457 ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL); 3458 IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); 3459 IXGBE_WRITE_FLUSH(hw); 3460 hw->mac.ops.release_swfw_sync(hw, swfw_mask); 3461 usleep_range(1000, 1200); 3462 3463 /* Poll for reset bit to self-clear meaning reset is complete */ 3464 for (i = 0; i < 10; i++) { 3465 ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); 3466 if (!(ctrl & IXGBE_CTRL_RST_MASK)) 3467 break; 3468 udelay(1); 3469 } 3470 3471 if (ctrl & IXGBE_CTRL_RST_MASK) { 3472 status = IXGBE_ERR_RESET_FAILED; 3473 hw_dbg(hw, "Reset polling failed to complete.\n"); 3474 } 3475 3476 msleep(50); 3477 3478 /* Double resets are required for recovery from certain error 3479 * clear the multicast table. Also reset num_rar_entries to 128, 3480 * since we modify this value when programming the SAN MAC address. 3481 */ 3482 if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { 3483 hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; 3484 goto mac_reset_top; 3485 } 3486 3487 /* Store the permanent mac address */ 3488 hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); 3489 3490 /* Store MAC address from RAR0, clear receive address registers, and 3491 * clear the multicast table. Also reset num_rar_entries to 128, 3492 * since we modify this value when programming the SAN MAC address. 3493 */ 3494 hw->mac.num_rar_entries = 128; 3495 hw->mac.ops.init_rx_addrs(hw); 3496 3497 ixgbe_set_mdio_speed(hw); 3498 3499 if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP) 3500 ixgbe_setup_mux_ctl(hw); 3501 3502 return status; 3503 } 3504 3505 /** ixgbe_set_ethertype_anti_spoofing_X550 - Enable/Disable Ethertype 3506 * anti-spoofing 3507 * @hw: pointer to hardware structure 3508 * @enable: enable or disable switch for Ethertype anti-spoofing 3509 * @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing 3510 **/ 3511 static void ixgbe_set_ethertype_anti_spoofing_X550(struct ixgbe_hw *hw, 3512 bool enable, int vf) 3513 { 3514 int vf_target_reg = vf >> 3; 3515 int vf_target_shift = vf % 8 + IXGBE_SPOOF_ETHERTYPEAS_SHIFT; 3516 u32 pfvfspoof; 3517 3518 pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg)); 3519 if (enable) 3520 pfvfspoof |= BIT(vf_target_shift); 3521 else 3522 pfvfspoof &= ~BIT(vf_target_shift); 3523 3524 IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof); 3525 } 3526 3527 /** ixgbe_set_source_address_pruning_X550 - Enable/Disbale src address pruning 3528 * @hw: pointer to hardware structure 3529 * @enable: enable or disable source address pruning 3530 * @pool: Rx pool to set source address pruning for 3531 **/ 3532 static void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw, 3533 bool enable, 3534 unsigned int pool) 3535 { 3536 u64 pfflp; 3537 3538 /* max rx pool is 63 */ 3539 if (pool > 63) 3540 return; 3541 3542 pfflp = (u64)IXGBE_READ_REG(hw, IXGBE_PFFLPL); 3543 pfflp |= (u64)IXGBE_READ_REG(hw, IXGBE_PFFLPH) << 32; 3544 3545 if (enable) 3546 pfflp |= (1ULL << pool); 3547 else 3548 pfflp &= ~(1ULL << pool); 3549 3550 IXGBE_WRITE_REG(hw, IXGBE_PFFLPL, (u32)pfflp); 3551 IXGBE_WRITE_REG(hw, IXGBE_PFFLPH, (u32)(pfflp >> 32)); 3552 } 3553 3554 /** 3555 * ixgbe_setup_fc_backplane_x550em_a - Set up flow control 3556 * @hw: pointer to hardware structure 3557 * 3558 * Called at init time to set up flow control. 3559 **/ 3560 static s32 ixgbe_setup_fc_backplane_x550em_a(struct ixgbe_hw *hw) 3561 { 3562 s32 status = 0; 3563 u32 an_cntl = 0; 3564 3565 /* Validate the requested mode */ 3566 if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) { 3567 hw_err(hw, "ixgbe_fc_rx_pause not valid in strict IEEE mode\n"); 3568 return IXGBE_ERR_INVALID_LINK_SETTINGS; 3569 } 3570 3571 if (hw->fc.requested_mode == ixgbe_fc_default) 3572 hw->fc.requested_mode = ixgbe_fc_full; 3573 3574 /* Set up the 1G and 10G flow control advertisement registers so the 3575 * HW will be able to do FC autoneg once the cable is plugged in. If 3576 * we link at 10G, the 1G advertisement is harmless and vice versa. 3577 */ 3578 status = hw->mac.ops.read_iosf_sb_reg(hw, 3579 IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), 3580 IXGBE_SB_IOSF_TARGET_KR_PHY, &an_cntl); 3581 3582 if (status) { 3583 hw_dbg(hw, "Auto-Negotiation did not complete\n"); 3584 return status; 3585 } 3586 3587 /* The possible values of fc.requested_mode are: 3588 * 0: Flow control is completely disabled 3589 * 1: Rx flow control is enabled (we can receive pause frames, 3590 * but not send pause frames). 3591 * 2: Tx flow control is enabled (we can send pause frames but 3592 * we do not support receiving pause frames). 3593 * 3: Both Rx and Tx flow control (symmetric) are enabled. 3594 * other: Invalid. 3595 */ 3596 switch (hw->fc.requested_mode) { 3597 case ixgbe_fc_none: 3598 /* Flow control completely disabled by software override. */ 3599 an_cntl &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE | 3600 IXGBE_KRM_AN_CNTL_1_ASM_PAUSE); 3601 break; 3602 case ixgbe_fc_tx_pause: 3603 /* Tx Flow control is enabled, and Rx Flow control is 3604 * disabled by software override. 3605 */ 3606 an_cntl |= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE; 3607 an_cntl &= ~IXGBE_KRM_AN_CNTL_1_SYM_PAUSE; 3608 break; 3609 case ixgbe_fc_rx_pause: 3610 /* Rx Flow control is enabled and Tx Flow control is 3611 * disabled by software override. Since there really 3612 * isn't a way to advertise that we are capable of RX 3613 * Pause ONLY, we will advertise that we support both 3614 * symmetric and asymmetric Rx PAUSE, as such we fall 3615 * through to the fc_full statement. Later, we will 3616 * disable the adapter's ability to send PAUSE frames. 3617 */ 3618 case ixgbe_fc_full: 3619 /* Flow control (both Rx and Tx) is enabled by SW override. */ 3620 an_cntl |= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE | 3621 IXGBE_KRM_AN_CNTL_1_ASM_PAUSE; 3622 break; 3623 default: 3624 hw_err(hw, "Flow control param set incorrectly\n"); 3625 return IXGBE_ERR_CONFIG; 3626 } 3627 3628 status = hw->mac.ops.write_iosf_sb_reg(hw, 3629 IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), 3630 IXGBE_SB_IOSF_TARGET_KR_PHY, an_cntl); 3631 3632 /* Restart auto-negotiation. */ 3633 status = ixgbe_restart_an_internal_phy_x550em(hw); 3634 3635 return status; 3636 } 3637 3638 /** 3639 * ixgbe_set_mux - Set mux for port 1 access with CS4227 3640 * @hw: pointer to hardware structure 3641 * @state: set mux if 1, clear if 0 3642 */ 3643 static void ixgbe_set_mux(struct ixgbe_hw *hw, u8 state) 3644 { 3645 u32 esdp; 3646 3647 if (!hw->bus.lan_id) 3648 return; 3649 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); 3650 if (state) 3651 esdp |= IXGBE_ESDP_SDP1; 3652 else 3653 esdp &= ~IXGBE_ESDP_SDP1; 3654 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); 3655 IXGBE_WRITE_FLUSH(hw); 3656 } 3657 3658 /** 3659 * ixgbe_acquire_swfw_sync_X550em - Acquire SWFW semaphore 3660 * @hw: pointer to hardware structure 3661 * @mask: Mask to specify which semaphore to acquire 3662 * 3663 * Acquires the SWFW semaphore and sets the I2C MUX 3664 */ 3665 static s32 ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask) 3666 { 3667 s32 status; 3668 3669 status = ixgbe_acquire_swfw_sync_X540(hw, mask); 3670 if (status) 3671 return status; 3672 3673 if (mask & IXGBE_GSSR_I2C_MASK) 3674 ixgbe_set_mux(hw, 1); 3675 3676 return 0; 3677 } 3678 3679 /** 3680 * ixgbe_release_swfw_sync_X550em - Release SWFW semaphore 3681 * @hw: pointer to hardware structure 3682 * @mask: Mask to specify which semaphore to release 3683 * 3684 * Releases the SWFW semaphore and sets the I2C MUX 3685 */ 3686 static void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask) 3687 { 3688 if (mask & IXGBE_GSSR_I2C_MASK) 3689 ixgbe_set_mux(hw, 0); 3690 3691 ixgbe_release_swfw_sync_X540(hw, mask); 3692 } 3693 3694 /** 3695 * ixgbe_acquire_swfw_sync_x550em_a - Acquire SWFW semaphore 3696 * @hw: pointer to hardware structure 3697 * @mask: Mask to specify which semaphore to acquire 3698 * 3699 * Acquires the SWFW semaphore and get the shared PHY token as needed 3700 */ 3701 static s32 ixgbe_acquire_swfw_sync_x550em_a(struct ixgbe_hw *hw, u32 mask) 3702 { 3703 u32 hmask = mask & ~IXGBE_GSSR_TOKEN_SM; 3704 int retries = FW_PHY_TOKEN_RETRIES; 3705 s32 status; 3706 3707 while (--retries) { 3708 status = 0; 3709 if (hmask) 3710 status = ixgbe_acquire_swfw_sync_X540(hw, hmask); 3711 if (status) 3712 return status; 3713 if (!(mask & IXGBE_GSSR_TOKEN_SM)) 3714 return 0; 3715 3716 status = ixgbe_get_phy_token(hw); 3717 if (!status) 3718 return 0; 3719 if (hmask) 3720 ixgbe_release_swfw_sync_X540(hw, hmask); 3721 if (status != IXGBE_ERR_TOKEN_RETRY) 3722 return status; 3723 msleep(FW_PHY_TOKEN_DELAY); 3724 } 3725 3726 return status; 3727 } 3728 3729 /** 3730 * ixgbe_release_swfw_sync_x550em_a - Release SWFW semaphore 3731 * @hw: pointer to hardware structure 3732 * @mask: Mask to specify which semaphore to release 3733 * 3734 * Release the SWFW semaphore and puts the shared PHY token as needed 3735 */ 3736 static void ixgbe_release_swfw_sync_x550em_a(struct ixgbe_hw *hw, u32 mask) 3737 { 3738 u32 hmask = mask & ~IXGBE_GSSR_TOKEN_SM; 3739 3740 if (mask & IXGBE_GSSR_TOKEN_SM) 3741 ixgbe_put_phy_token(hw); 3742 3743 if (hmask) 3744 ixgbe_release_swfw_sync_X540(hw, hmask); 3745 } 3746 3747 /** 3748 * ixgbe_read_phy_reg_x550a - Reads specified PHY register 3749 * @hw: pointer to hardware structure 3750 * @reg_addr: 32 bit address of PHY register to read 3751 * @device_type: 5 bit device type 3752 * @phy_data: Pointer to read data from PHY register 3753 * 3754 * Reads a value from a specified PHY register using the SWFW lock and PHY 3755 * Token. The PHY Token is needed since the MDIO is shared between to MAC 3756 * instances. 3757 */ 3758 static s32 ixgbe_read_phy_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, 3759 u32 device_type, u16 *phy_data) 3760 { 3761 u32 mask = hw->phy.phy_semaphore_mask | IXGBE_GSSR_TOKEN_SM; 3762 s32 status; 3763 3764 if (hw->mac.ops.acquire_swfw_sync(hw, mask)) 3765 return IXGBE_ERR_SWFW_SYNC; 3766 3767 status = hw->phy.ops.read_reg_mdi(hw, reg_addr, device_type, phy_data); 3768 3769 hw->mac.ops.release_swfw_sync(hw, mask); 3770 3771 return status; 3772 } 3773 3774 /** 3775 * ixgbe_write_phy_reg_x550a - Writes specified PHY register 3776 * @hw: pointer to hardware structure 3777 * @reg_addr: 32 bit PHY register to write 3778 * @device_type: 5 bit device type 3779 * @phy_data: Data to write to the PHY register 3780 * 3781 * Writes a value to specified PHY register using the SWFW lock and PHY Token. 3782 * The PHY Token is needed since the MDIO is shared between to MAC instances. 3783 */ 3784 static s32 ixgbe_write_phy_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, 3785 u32 device_type, u16 phy_data) 3786 { 3787 u32 mask = hw->phy.phy_semaphore_mask | IXGBE_GSSR_TOKEN_SM; 3788 s32 status; 3789 3790 if (hw->mac.ops.acquire_swfw_sync(hw, mask)) 3791 return IXGBE_ERR_SWFW_SYNC; 3792 3793 status = ixgbe_write_phy_reg_mdi(hw, reg_addr, device_type, phy_data); 3794 hw->mac.ops.release_swfw_sync(hw, mask); 3795 3796 return status; 3797 } 3798 3799 #define X550_COMMON_MAC \ 3800 .init_hw = &ixgbe_init_hw_generic, \ 3801 .start_hw = &ixgbe_start_hw_X540, \ 3802 .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic, \ 3803 .enable_rx_dma = &ixgbe_enable_rx_dma_generic, \ 3804 .get_mac_addr = &ixgbe_get_mac_addr_generic, \ 3805 .get_device_caps = &ixgbe_get_device_caps_generic, \ 3806 .stop_adapter = &ixgbe_stop_adapter_generic, \ 3807 .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie, \ 3808 .read_analog_reg8 = NULL, \ 3809 .write_analog_reg8 = NULL, \ 3810 .set_rxpba = &ixgbe_set_rxpba_generic, \ 3811 .check_link = &ixgbe_check_mac_link_generic, \ 3812 .blink_led_start = &ixgbe_blink_led_start_X540, \ 3813 .blink_led_stop = &ixgbe_blink_led_stop_X540, \ 3814 .set_rar = &ixgbe_set_rar_generic, \ 3815 .clear_rar = &ixgbe_clear_rar_generic, \ 3816 .set_vmdq = &ixgbe_set_vmdq_generic, \ 3817 .set_vmdq_san_mac = &ixgbe_set_vmdq_san_mac_generic, \ 3818 .clear_vmdq = &ixgbe_clear_vmdq_generic, \ 3819 .init_rx_addrs = &ixgbe_init_rx_addrs_generic, \ 3820 .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic, \ 3821 .enable_mc = &ixgbe_enable_mc_generic, \ 3822 .disable_mc = &ixgbe_disable_mc_generic, \ 3823 .clear_vfta = &ixgbe_clear_vfta_generic, \ 3824 .set_vfta = &ixgbe_set_vfta_generic, \ 3825 .fc_enable = &ixgbe_fc_enable_generic, \ 3826 .set_fw_drv_ver = &ixgbe_set_fw_drv_ver_x550, \ 3827 .init_uta_tables = &ixgbe_init_uta_tables_generic, \ 3828 .set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing, \ 3829 .set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing, \ 3830 .set_source_address_pruning = \ 3831 &ixgbe_set_source_address_pruning_X550, \ 3832 .set_ethertype_anti_spoofing = \ 3833 &ixgbe_set_ethertype_anti_spoofing_X550, \ 3834 .disable_rx_buff = &ixgbe_disable_rx_buff_generic, \ 3835 .enable_rx_buff = &ixgbe_enable_rx_buff_generic, \ 3836 .get_thermal_sensor_data = NULL, \ 3837 .init_thermal_sensor_thresh = NULL, \ 3838 .fw_recovery_mode = &ixgbe_fw_recovery_mode_X550, \ 3839 .enable_rx = &ixgbe_enable_rx_generic, \ 3840 .disable_rx = &ixgbe_disable_rx_x550, \ 3841 3842 static const struct ixgbe_mac_operations mac_ops_X550 = { 3843 X550_COMMON_MAC 3844 .led_on = ixgbe_led_on_generic, 3845 .led_off = ixgbe_led_off_generic, 3846 .init_led_link_act = ixgbe_init_led_link_act_generic, 3847 .reset_hw = &ixgbe_reset_hw_X540, 3848 .get_media_type = &ixgbe_get_media_type_X540, 3849 .get_san_mac_addr = &ixgbe_get_san_mac_addr_generic, 3850 .get_wwn_prefix = &ixgbe_get_wwn_prefix_generic, 3851 .setup_link = &ixgbe_setup_mac_link_X540, 3852 .get_link_capabilities = &ixgbe_get_copper_link_capabilities_generic, 3853 .get_bus_info = &ixgbe_get_bus_info_generic, 3854 .setup_sfp = NULL, 3855 .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X540, 3856 .release_swfw_sync = &ixgbe_release_swfw_sync_X540, 3857 .init_swfw_sync = &ixgbe_init_swfw_sync_X540, 3858 .prot_autoc_read = prot_autoc_read_generic, 3859 .prot_autoc_write = prot_autoc_write_generic, 3860 .setup_fc = ixgbe_setup_fc_generic, 3861 .fc_autoneg = ixgbe_fc_autoneg, 3862 }; 3863 3864 static const struct ixgbe_mac_operations mac_ops_X550EM_x = { 3865 X550_COMMON_MAC 3866 .led_on = ixgbe_led_on_t_x550em, 3867 .led_off = ixgbe_led_off_t_x550em, 3868 .init_led_link_act = ixgbe_init_led_link_act_generic, 3869 .reset_hw = &ixgbe_reset_hw_X550em, 3870 .get_media_type = &ixgbe_get_media_type_X550em, 3871 .get_san_mac_addr = NULL, 3872 .get_wwn_prefix = NULL, 3873 .setup_link = &ixgbe_setup_mac_link_X540, 3874 .get_link_capabilities = &ixgbe_get_link_capabilities_X550em, 3875 .get_bus_info = &ixgbe_get_bus_info_X550em, 3876 .setup_sfp = ixgbe_setup_sfp_modules_X550em, 3877 .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X550em, 3878 .release_swfw_sync = &ixgbe_release_swfw_sync_X550em, 3879 .init_swfw_sync = &ixgbe_init_swfw_sync_X540, 3880 .setup_fc = NULL, /* defined later */ 3881 .fc_autoneg = ixgbe_fc_autoneg, 3882 .read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550, 3883 .write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550, 3884 }; 3885 3886 static const struct ixgbe_mac_operations mac_ops_X550EM_x_fw = { 3887 X550_COMMON_MAC 3888 .led_on = NULL, 3889 .led_off = NULL, 3890 .init_led_link_act = NULL, 3891 .reset_hw = &ixgbe_reset_hw_X550em, 3892 .get_media_type = &ixgbe_get_media_type_X550em, 3893 .get_san_mac_addr = NULL, 3894 .get_wwn_prefix = NULL, 3895 .setup_link = &ixgbe_setup_mac_link_X540, 3896 .get_link_capabilities = &ixgbe_get_link_capabilities_X550em, 3897 .get_bus_info = &ixgbe_get_bus_info_X550em, 3898 .setup_sfp = ixgbe_setup_sfp_modules_X550em, 3899 .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X550em, 3900 .release_swfw_sync = &ixgbe_release_swfw_sync_X550em, 3901 .init_swfw_sync = &ixgbe_init_swfw_sync_X540, 3902 .setup_fc = NULL, 3903 .fc_autoneg = ixgbe_fc_autoneg, 3904 .read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550, 3905 .write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550, 3906 }; 3907 3908 static const struct ixgbe_mac_operations mac_ops_x550em_a = { 3909 X550_COMMON_MAC 3910 .led_on = ixgbe_led_on_t_x550em, 3911 .led_off = ixgbe_led_off_t_x550em, 3912 .init_led_link_act = ixgbe_init_led_link_act_generic, 3913 .reset_hw = ixgbe_reset_hw_X550em, 3914 .get_media_type = ixgbe_get_media_type_X550em, 3915 .get_san_mac_addr = NULL, 3916 .get_wwn_prefix = NULL, 3917 .setup_link = &ixgbe_setup_mac_link_X540, 3918 .get_link_capabilities = ixgbe_get_link_capabilities_X550em, 3919 .get_bus_info = ixgbe_get_bus_info_X550em, 3920 .setup_sfp = ixgbe_setup_sfp_modules_X550em, 3921 .acquire_swfw_sync = ixgbe_acquire_swfw_sync_x550em_a, 3922 .release_swfw_sync = ixgbe_release_swfw_sync_x550em_a, 3923 .setup_fc = ixgbe_setup_fc_x550em, 3924 .fc_autoneg = ixgbe_fc_autoneg, 3925 .read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550a, 3926 .write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550a, 3927 }; 3928 3929 static const struct ixgbe_mac_operations mac_ops_x550em_a_fw = { 3930 X550_COMMON_MAC 3931 .led_on = ixgbe_led_on_generic, 3932 .led_off = ixgbe_led_off_generic, 3933 .init_led_link_act = ixgbe_init_led_link_act_generic, 3934 .reset_hw = ixgbe_reset_hw_X550em, 3935 .get_media_type = ixgbe_get_media_type_X550em, 3936 .get_san_mac_addr = NULL, 3937 .get_wwn_prefix = NULL, 3938 .setup_link = NULL, /* defined later */ 3939 .get_link_capabilities = ixgbe_get_link_capabilities_X550em, 3940 .get_bus_info = ixgbe_get_bus_info_X550em, 3941 .setup_sfp = ixgbe_setup_sfp_modules_X550em, 3942 .acquire_swfw_sync = ixgbe_acquire_swfw_sync_x550em_a, 3943 .release_swfw_sync = ixgbe_release_swfw_sync_x550em_a, 3944 .setup_fc = ixgbe_setup_fc_x550em, 3945 .fc_autoneg = ixgbe_fc_autoneg, 3946 .read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550a, 3947 .write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550a, 3948 }; 3949 3950 #define X550_COMMON_EEP \ 3951 .read = &ixgbe_read_ee_hostif_X550, \ 3952 .read_buffer = &ixgbe_read_ee_hostif_buffer_X550, \ 3953 .write = &ixgbe_write_ee_hostif_X550, \ 3954 .write_buffer = &ixgbe_write_ee_hostif_buffer_X550, \ 3955 .validate_checksum = &ixgbe_validate_eeprom_checksum_X550, \ 3956 .update_checksum = &ixgbe_update_eeprom_checksum_X550, \ 3957 .calc_checksum = &ixgbe_calc_eeprom_checksum_X550, \ 3958 3959 static const struct ixgbe_eeprom_operations eeprom_ops_X550 = { 3960 X550_COMMON_EEP 3961 .init_params = &ixgbe_init_eeprom_params_X550, 3962 }; 3963 3964 static const struct ixgbe_eeprom_operations eeprom_ops_X550EM_x = { 3965 X550_COMMON_EEP 3966 .init_params = &ixgbe_init_eeprom_params_X540, 3967 }; 3968 3969 #define X550_COMMON_PHY \ 3970 .identify_sfp = &ixgbe_identify_module_generic, \ 3971 .reset = NULL, \ 3972 .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, \ 3973 .read_i2c_byte = &ixgbe_read_i2c_byte_generic, \ 3974 .write_i2c_byte = &ixgbe_write_i2c_byte_generic, \ 3975 .read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_generic, \ 3976 .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic, \ 3977 .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic, \ 3978 .setup_link = &ixgbe_setup_phy_link_generic, \ 3979 .set_phy_power = NULL, 3980 3981 static const struct ixgbe_phy_operations phy_ops_X550 = { 3982 X550_COMMON_PHY 3983 .check_overtemp = &ixgbe_tn_check_overtemp, 3984 .init = NULL, 3985 .identify = &ixgbe_identify_phy_generic, 3986 .read_reg = &ixgbe_read_phy_reg_generic, 3987 .write_reg = &ixgbe_write_phy_reg_generic, 3988 }; 3989 3990 static const struct ixgbe_phy_operations phy_ops_X550EM_x = { 3991 X550_COMMON_PHY 3992 .check_overtemp = &ixgbe_tn_check_overtemp, 3993 .init = &ixgbe_init_phy_ops_X550em, 3994 .identify = &ixgbe_identify_phy_x550em, 3995 .read_reg = &ixgbe_read_phy_reg_generic, 3996 .write_reg = &ixgbe_write_phy_reg_generic, 3997 }; 3998 3999 static const struct ixgbe_phy_operations phy_ops_x550em_x_fw = { 4000 X550_COMMON_PHY 4001 .check_overtemp = NULL, 4002 .init = ixgbe_init_phy_ops_X550em, 4003 .identify = ixgbe_identify_phy_x550em, 4004 .read_reg = NULL, 4005 .write_reg = NULL, 4006 .read_reg_mdi = NULL, 4007 .write_reg_mdi = NULL, 4008 }; 4009 4010 static const struct ixgbe_phy_operations phy_ops_x550em_a = { 4011 X550_COMMON_PHY 4012 .check_overtemp = &ixgbe_tn_check_overtemp, 4013 .init = &ixgbe_init_phy_ops_X550em, 4014 .identify = &ixgbe_identify_phy_x550em, 4015 .read_reg = &ixgbe_read_phy_reg_x550a, 4016 .write_reg = &ixgbe_write_phy_reg_x550a, 4017 .read_reg_mdi = &ixgbe_read_phy_reg_mdi, 4018 .write_reg_mdi = &ixgbe_write_phy_reg_mdi, 4019 }; 4020 4021 static const struct ixgbe_phy_operations phy_ops_x550em_a_fw = { 4022 X550_COMMON_PHY 4023 .check_overtemp = ixgbe_check_overtemp_fw, 4024 .init = ixgbe_init_phy_ops_X550em, 4025 .identify = ixgbe_identify_phy_fw, 4026 .read_reg = NULL, 4027 .write_reg = NULL, 4028 .read_reg_mdi = NULL, 4029 .write_reg_mdi = NULL, 4030 }; 4031 4032 static const struct ixgbe_link_operations link_ops_x550em_x = { 4033 .read_link = &ixgbe_read_i2c_combined_generic, 4034 .read_link_unlocked = &ixgbe_read_i2c_combined_generic_unlocked, 4035 .write_link = &ixgbe_write_i2c_combined_generic, 4036 .write_link_unlocked = &ixgbe_write_i2c_combined_generic_unlocked, 4037 }; 4038 4039 static const u32 ixgbe_mvals_X550[IXGBE_MVALS_IDX_LIMIT] = { 4040 IXGBE_MVALS_INIT(X550) 4041 }; 4042 4043 static const u32 ixgbe_mvals_X550EM_x[IXGBE_MVALS_IDX_LIMIT] = { 4044 IXGBE_MVALS_INIT(X550EM_x) 4045 }; 4046 4047 static const u32 ixgbe_mvals_x550em_a[IXGBE_MVALS_IDX_LIMIT] = { 4048 IXGBE_MVALS_INIT(X550EM_a) 4049 }; 4050 4051 const struct ixgbe_info ixgbe_X550_info = { 4052 .mac = ixgbe_mac_X550, 4053 .get_invariants = &ixgbe_get_invariants_X540, 4054 .mac_ops = &mac_ops_X550, 4055 .eeprom_ops = &eeprom_ops_X550, 4056 .phy_ops = &phy_ops_X550, 4057 .mbx_ops = &mbx_ops_generic, 4058 .mvals = ixgbe_mvals_X550, 4059 }; 4060 4061 const struct ixgbe_info ixgbe_X550EM_x_info = { 4062 .mac = ixgbe_mac_X550EM_x, 4063 .get_invariants = &ixgbe_get_invariants_X550_x, 4064 .mac_ops = &mac_ops_X550EM_x, 4065 .eeprom_ops = &eeprom_ops_X550EM_x, 4066 .phy_ops = &phy_ops_X550EM_x, 4067 .mbx_ops = &mbx_ops_generic, 4068 .mvals = ixgbe_mvals_X550EM_x, 4069 .link_ops = &link_ops_x550em_x, 4070 }; 4071 4072 const struct ixgbe_info ixgbe_x550em_x_fw_info = { 4073 .mac = ixgbe_mac_X550EM_x, 4074 .get_invariants = ixgbe_get_invariants_X550_x_fw, 4075 .mac_ops = &mac_ops_X550EM_x_fw, 4076 .eeprom_ops = &eeprom_ops_X550EM_x, 4077 .phy_ops = &phy_ops_x550em_x_fw, 4078 .mbx_ops = &mbx_ops_generic, 4079 .mvals = ixgbe_mvals_X550EM_x, 4080 }; 4081 4082 const struct ixgbe_info ixgbe_x550em_a_info = { 4083 .mac = ixgbe_mac_x550em_a, 4084 .get_invariants = &ixgbe_get_invariants_X550_a, 4085 .mac_ops = &mac_ops_x550em_a, 4086 .eeprom_ops = &eeprom_ops_X550EM_x, 4087 .phy_ops = &phy_ops_x550em_a, 4088 .mbx_ops = &mbx_ops_generic, 4089 .mvals = ixgbe_mvals_x550em_a, 4090 }; 4091 4092 const struct ixgbe_info ixgbe_x550em_a_fw_info = { 4093 .mac = ixgbe_mac_x550em_a, 4094 .get_invariants = ixgbe_get_invariants_X550_a_fw, 4095 .mac_ops = &mac_ops_x550em_a_fw, 4096 .eeprom_ops = &eeprom_ops_X550EM_x, 4097 .phy_ops = &phy_ops_x550em_a_fw, 4098 .mbx_ops = &mbx_ops_generic, 4099 .mvals = ixgbe_mvals_x550em_a, 4100 }; 4101