xref: /openbmc/linux/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c (revision 5ef12cb4a3a78ffb331c03a795a15eea4ae35155)
1 /*******************************************************************************
2 
3   Intel 10 Gigabit PCI Express Linux driver
4   Copyright(c) 1999 - 2015 Intel Corporation.
5 
6   This program is free software; you can redistribute it and/or modify it
7   under the terms and conditions of the GNU General Public License,
8   version 2, as published by the Free Software Foundation.
9 
10   This program is distributed in the hope it will be useful, but WITHOUT
11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13   more details.
14 
15   You should have received a copy of the GNU General Public License along with
16   this program; if not, write to the Free Software Foundation, Inc.,
17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18 
19   The full GNU General Public License is included in this distribution in
20   the file called "COPYING".
21 
22   Contact Information:
23   Linux NICS <linux.nics@intel.com>
24   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
25   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
26 
27 *******************************************************************************/
28 
29 #include <linux/types.h>
30 #include <linux/module.h>
31 #include <linux/pci.h>
32 #include <linux/netdevice.h>
33 #include <linux/vmalloc.h>
34 #include <linux/string.h>
35 #include <linux/in.h>
36 #include <linux/ip.h>
37 #include <linux/tcp.h>
38 #include <linux/ipv6.h>
39 #include <linux/if_bridge.h>
40 #ifdef NETIF_F_HW_VLAN_CTAG_TX
41 #include <linux/if_vlan.h>
42 #endif
43 
44 #include "ixgbe.h"
45 #include "ixgbe_type.h"
46 #include "ixgbe_sriov.h"
47 
48 #ifdef CONFIG_PCI_IOV
49 static inline void ixgbe_alloc_vf_macvlans(struct ixgbe_adapter *adapter,
50 					   unsigned int num_vfs)
51 {
52 	struct ixgbe_hw *hw = &adapter->hw;
53 	struct vf_macvlans *mv_list;
54 	int num_vf_macvlans, i;
55 
56 	num_vf_macvlans = hw->mac.num_rar_entries -
57 			  (IXGBE_MAX_PF_MACVLANS + 1 + num_vfs);
58 	if (!num_vf_macvlans)
59 		return;
60 
61 	mv_list = kcalloc(num_vf_macvlans, sizeof(struct vf_macvlans),
62 			  GFP_KERNEL);
63 	if (mv_list) {
64 		/* Initialize list of VF macvlans */
65 		INIT_LIST_HEAD(&adapter->vf_mvs.l);
66 		for (i = 0; i < num_vf_macvlans; i++) {
67 			mv_list[i].vf = -1;
68 			mv_list[i].free = true;
69 			list_add(&mv_list[i].l, &adapter->vf_mvs.l);
70 		}
71 		adapter->mv_list = mv_list;
72 	}
73 }
74 
75 static int __ixgbe_enable_sriov(struct ixgbe_adapter *adapter,
76 				unsigned int num_vfs)
77 {
78 	struct ixgbe_hw *hw = &adapter->hw;
79 	int i;
80 
81 	/* Enable VMDq flag so device will be set in VM mode */
82 	adapter->flags |= IXGBE_FLAG_SRIOV_ENABLED |
83 			  IXGBE_FLAG_VMDQ_ENABLED;
84 
85 	/* Allocate memory for per VF control structures */
86 	adapter->vfinfo = kcalloc(num_vfs, sizeof(struct vf_data_storage),
87 				  GFP_KERNEL);
88 	if (!adapter->vfinfo)
89 		return -ENOMEM;
90 
91 	adapter->num_vfs = num_vfs;
92 
93 	ixgbe_alloc_vf_macvlans(adapter, num_vfs);
94 	adapter->ring_feature[RING_F_VMDQ].offset = num_vfs;
95 
96 	/* Initialize default switching mode VEB */
97 	IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN);
98 	adapter->bridge_mode = BRIDGE_MODE_VEB;
99 
100 	/* limit trafffic classes based on VFs enabled */
101 	if ((adapter->hw.mac.type == ixgbe_mac_82599EB) && (num_vfs < 16)) {
102 		adapter->dcb_cfg.num_tcs.pg_tcs = MAX_TRAFFIC_CLASS;
103 		adapter->dcb_cfg.num_tcs.pfc_tcs = MAX_TRAFFIC_CLASS;
104 	} else if (num_vfs < 32) {
105 		adapter->dcb_cfg.num_tcs.pg_tcs = 4;
106 		adapter->dcb_cfg.num_tcs.pfc_tcs = 4;
107 	} else {
108 		adapter->dcb_cfg.num_tcs.pg_tcs = 1;
109 		adapter->dcb_cfg.num_tcs.pfc_tcs = 1;
110 	}
111 
112 	/* Disable RSC when in SR-IOV mode */
113 	adapter->flags2 &= ~(IXGBE_FLAG2_RSC_CAPABLE |
114 			     IXGBE_FLAG2_RSC_ENABLED);
115 
116 	for (i = 0; i < num_vfs; i++) {
117 		/* enable spoof checking for all VFs */
118 		adapter->vfinfo[i].spoofchk_enabled = true;
119 
120 		/* We support VF RSS querying only for 82599 and x540
121 		 * devices at the moment. These devices share RSS
122 		 * indirection table and RSS hash key with PF therefore
123 		 * we want to disable the querying by default.
124 		 */
125 		adapter->vfinfo[i].rss_query_enabled = 0;
126 
127 		/* Untrust all VFs */
128 		adapter->vfinfo[i].trusted = false;
129 
130 		/* set the default xcast mode */
131 		adapter->vfinfo[i].xcast_mode = IXGBEVF_XCAST_MODE_NONE;
132 	}
133 
134 	e_info(probe, "SR-IOV enabled with %d VFs\n", num_vfs);
135 	return 0;
136 }
137 
138 /**
139  * ixgbe_get_vfs - Find and take references to all vf devices
140  * @adapter: Pointer to adapter struct
141  */
142 static void ixgbe_get_vfs(struct ixgbe_adapter *adapter)
143 {
144 	struct pci_dev *pdev = adapter->pdev;
145 	u16 vendor = pdev->vendor;
146 	struct pci_dev *vfdev;
147 	int vf = 0;
148 	u16 vf_id;
149 	int pos;
150 
151 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV);
152 	if (!pos)
153 		return;
154 	pci_read_config_word(pdev, pos + PCI_SRIOV_VF_DID, &vf_id);
155 
156 	vfdev = pci_get_device(vendor, vf_id, NULL);
157 	for (; vfdev; vfdev = pci_get_device(vendor, vf_id, vfdev)) {
158 		if (!vfdev->is_virtfn)
159 			continue;
160 		if (vfdev->physfn != pdev)
161 			continue;
162 		if (vf >= adapter->num_vfs)
163 			continue;
164 		pci_dev_get(vfdev);
165 		adapter->vfinfo[vf].vfdev = vfdev;
166 		++vf;
167 	}
168 }
169 
170 /* Note this function is called when the user wants to enable SR-IOV
171  * VFs using the now deprecated module parameter
172  */
173 void ixgbe_enable_sriov(struct ixgbe_adapter *adapter, unsigned int max_vfs)
174 {
175 	int pre_existing_vfs = 0;
176 	unsigned int num_vfs;
177 
178 	pre_existing_vfs = pci_num_vf(adapter->pdev);
179 	if (!pre_existing_vfs && !max_vfs)
180 		return;
181 
182 	/* If there are pre-existing VFs then we have to force
183 	 * use of that many - over ride any module parameter value.
184 	 * This may result from the user unloading the PF driver
185 	 * while VFs were assigned to guest VMs or because the VFs
186 	 * have been created via the new PCI SR-IOV sysfs interface.
187 	 */
188 	if (pre_existing_vfs) {
189 		num_vfs = pre_existing_vfs;
190 		dev_warn(&adapter->pdev->dev,
191 			 "Virtual Functions already enabled for this device - Please reload all VF drivers to avoid spoofed packet errors\n");
192 	} else {
193 		int err;
194 		/*
195 		 * The 82599 supports up to 64 VFs per physical function
196 		 * but this implementation limits allocation to 63 so that
197 		 * basic networking resources are still available to the
198 		 * physical function.  If the user requests greater than
199 		 * 63 VFs then it is an error - reset to default of zero.
200 		 */
201 		num_vfs = min_t(unsigned int, max_vfs, IXGBE_MAX_VFS_DRV_LIMIT);
202 
203 		err = pci_enable_sriov(adapter->pdev, num_vfs);
204 		if (err) {
205 			e_err(probe, "Failed to enable PCI sriov: %d\n", err);
206 			return;
207 		}
208 	}
209 
210 	if (!__ixgbe_enable_sriov(adapter, num_vfs)) {
211 		ixgbe_get_vfs(adapter);
212 		return;
213 	}
214 
215 	/* If we have gotten to this point then there is no memory available
216 	 * to manage the VF devices - print message and bail.
217 	 */
218 	e_err(probe, "Unable to allocate memory for VF Data Storage - "
219 	      "SRIOV disabled\n");
220 	ixgbe_disable_sriov(adapter);
221 }
222 
223 #endif /* #ifdef CONFIG_PCI_IOV */
224 int ixgbe_disable_sriov(struct ixgbe_adapter *adapter)
225 {
226 	unsigned int num_vfs = adapter->num_vfs, vf;
227 	int rss;
228 
229 	/* set num VFs to 0 to prevent access to vfinfo */
230 	adapter->num_vfs = 0;
231 
232 	/* put the reference to all of the vf devices */
233 	for (vf = 0; vf < num_vfs; ++vf) {
234 		struct pci_dev *vfdev = adapter->vfinfo[vf].vfdev;
235 
236 		if (!vfdev)
237 			continue;
238 		adapter->vfinfo[vf].vfdev = NULL;
239 		pci_dev_put(vfdev);
240 	}
241 
242 	/* free VF control structures */
243 	kfree(adapter->vfinfo);
244 	adapter->vfinfo = NULL;
245 
246 	/* free macvlan list */
247 	kfree(adapter->mv_list);
248 	adapter->mv_list = NULL;
249 
250 	/* if SR-IOV is already disabled then there is nothing to do */
251 	if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED))
252 		return 0;
253 
254 #ifdef CONFIG_PCI_IOV
255 	/*
256 	 * If our VFs are assigned we cannot shut down SR-IOV
257 	 * without causing issues, so just leave the hardware
258 	 * available but disabled
259 	 */
260 	if (pci_vfs_assigned(adapter->pdev)) {
261 		e_dev_warn("Unloading driver while VFs are assigned - VFs will not be deallocated\n");
262 		return -EPERM;
263 	}
264 	/* disable iov and allow time for transactions to clear */
265 	pci_disable_sriov(adapter->pdev);
266 #endif
267 
268 	/* Disable VMDq flag so device will be set in VM mode */
269 	if (adapter->ring_feature[RING_F_VMDQ].limit == 1) {
270 		adapter->flags &= ~IXGBE_FLAG_VMDQ_ENABLED;
271 		adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED;
272 		rss = min_t(int, ixgbe_max_rss_indices(adapter),
273 			    num_online_cpus());
274 	} else {
275 		rss = min_t(int, IXGBE_MAX_L2A_QUEUES, num_online_cpus());
276 	}
277 
278 	adapter->ring_feature[RING_F_VMDQ].offset = 0;
279 	adapter->ring_feature[RING_F_RSS].limit = rss;
280 
281 	/* take a breather then clean up driver data */
282 	msleep(100);
283 	return 0;
284 }
285 
286 static int ixgbe_pci_sriov_enable(struct pci_dev *dev, int num_vfs)
287 {
288 #ifdef CONFIG_PCI_IOV
289 	struct ixgbe_adapter *adapter = pci_get_drvdata(dev);
290 	int pre_existing_vfs = pci_num_vf(dev);
291 	int err = 0, num_rx_pools, i, limit;
292 	u8 num_tc;
293 
294 	if (pre_existing_vfs && pre_existing_vfs != num_vfs)
295 		err = ixgbe_disable_sriov(adapter);
296 	else if (pre_existing_vfs && pre_existing_vfs == num_vfs)
297 		return num_vfs;
298 
299 	if (err)
300 		return err;
301 
302 	/* While the SR-IOV capability structure reports total VFs to be 64,
303 	 * we limit the actual number allocated as below based on two factors.
304 	 *    Num_TCs	MAX_VFs
305 	 *	1	  63
306 	 *	<=4	  31
307 	 *	>4	  15
308 	 * First, we reserve some transmit/receive resources for the PF.
309 	 * Second, VMDQ also uses the same pools that SR-IOV does. We need to
310 	 * account for this, so that we don't accidentally allocate more VFs
311 	 * than we have available pools. The PCI bus driver already checks for
312 	 * other values out of range.
313 	 */
314 	num_tc = adapter->hw_tcs;
315 	num_rx_pools = adapter->num_rx_pools;
316 	limit = (num_tc > 4) ? IXGBE_MAX_VFS_8TC :
317 		(num_tc > 1) ? IXGBE_MAX_VFS_4TC : IXGBE_MAX_VFS_1TC;
318 
319 	if (num_vfs > (limit - num_rx_pools)) {
320 		e_dev_err("Currently configured with %d TCs, and %d offloaded macvlans. Creating more than %d VFs is not allowed\n",
321 			  num_tc, num_rx_pools - 1, limit - num_rx_pools);
322 		return -EPERM;
323 	}
324 
325 	err = __ixgbe_enable_sriov(adapter, num_vfs);
326 	if (err)
327 		return  err;
328 
329 	for (i = 0; i < num_vfs; i++)
330 		ixgbe_vf_configuration(dev, (i | 0x10000000));
331 
332 	/* reset before enabling SRIOV to avoid mailbox issues */
333 	ixgbe_sriov_reinit(adapter);
334 
335 	err = pci_enable_sriov(dev, num_vfs);
336 	if (err) {
337 		e_dev_warn("Failed to enable PCI sriov: %d\n", err);
338 		return err;
339 	}
340 	ixgbe_get_vfs(adapter);
341 
342 	return num_vfs;
343 #else
344 	return 0;
345 #endif
346 }
347 
348 static int ixgbe_pci_sriov_disable(struct pci_dev *dev)
349 {
350 	struct ixgbe_adapter *adapter = pci_get_drvdata(dev);
351 	int err;
352 #ifdef CONFIG_PCI_IOV
353 	u32 current_flags = adapter->flags;
354 	int prev_num_vf = pci_num_vf(dev);
355 #endif
356 
357 	err = ixgbe_disable_sriov(adapter);
358 
359 	/* Only reinit if no error and state changed */
360 #ifdef CONFIG_PCI_IOV
361 	if (!err && (current_flags != adapter->flags ||
362 		     prev_num_vf != pci_num_vf(dev)))
363 		ixgbe_sriov_reinit(adapter);
364 #endif
365 
366 	return err;
367 }
368 
369 int ixgbe_pci_sriov_configure(struct pci_dev *dev, int num_vfs)
370 {
371 	if (num_vfs == 0)
372 		return ixgbe_pci_sriov_disable(dev);
373 	else
374 		return ixgbe_pci_sriov_enable(dev, num_vfs);
375 }
376 
377 static int ixgbe_set_vf_multicasts(struct ixgbe_adapter *adapter,
378 				   u32 *msgbuf, u32 vf)
379 {
380 	int entries = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK)
381 		       >> IXGBE_VT_MSGINFO_SHIFT;
382 	u16 *hash_list = (u16 *)&msgbuf[1];
383 	struct vf_data_storage *vfinfo = &adapter->vfinfo[vf];
384 	struct ixgbe_hw *hw = &adapter->hw;
385 	int i;
386 	u32 vector_bit;
387 	u32 vector_reg;
388 	u32 mta_reg;
389 	u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf));
390 
391 	/* only so many hash values supported */
392 	entries = min(entries, IXGBE_MAX_VF_MC_ENTRIES);
393 
394 	/*
395 	 * salt away the number of multi cast addresses assigned
396 	 * to this VF for later use to restore when the PF multi cast
397 	 * list changes
398 	 */
399 	vfinfo->num_vf_mc_hashes = entries;
400 
401 	/*
402 	 * VFs are limited to using the MTA hash table for their multicast
403 	 * addresses
404 	 */
405 	for (i = 0; i < entries; i++) {
406 		vfinfo->vf_mc_hashes[i] = hash_list[i];
407 	}
408 
409 	for (i = 0; i < vfinfo->num_vf_mc_hashes; i++) {
410 		vector_reg = (vfinfo->vf_mc_hashes[i] >> 5) & 0x7F;
411 		vector_bit = vfinfo->vf_mc_hashes[i] & 0x1F;
412 		mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg));
413 		mta_reg |= BIT(vector_bit);
414 		IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg);
415 	}
416 	vmolr |= IXGBE_VMOLR_ROMPE;
417 	IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr);
418 
419 	return 0;
420 }
421 
422 #ifdef CONFIG_PCI_IOV
423 void ixgbe_restore_vf_multicasts(struct ixgbe_adapter *adapter)
424 {
425 	struct ixgbe_hw *hw = &adapter->hw;
426 	struct vf_data_storage *vfinfo;
427 	int i, j;
428 	u32 vector_bit;
429 	u32 vector_reg;
430 	u32 mta_reg;
431 
432 	for (i = 0; i < adapter->num_vfs; i++) {
433 		u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(i));
434 		vfinfo = &adapter->vfinfo[i];
435 		for (j = 0; j < vfinfo->num_vf_mc_hashes; j++) {
436 			hw->addr_ctrl.mta_in_use++;
437 			vector_reg = (vfinfo->vf_mc_hashes[j] >> 5) & 0x7F;
438 			vector_bit = vfinfo->vf_mc_hashes[j] & 0x1F;
439 			mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg));
440 			mta_reg |= BIT(vector_bit);
441 			IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg);
442 		}
443 
444 		if (vfinfo->num_vf_mc_hashes)
445 			vmolr |= IXGBE_VMOLR_ROMPE;
446 		else
447 			vmolr &= ~IXGBE_VMOLR_ROMPE;
448 		IXGBE_WRITE_REG(hw, IXGBE_VMOLR(i), vmolr);
449 	}
450 
451 	/* Restore any VF macvlans */
452 	ixgbe_full_sync_mac_table(adapter);
453 }
454 #endif
455 
456 static int ixgbe_set_vf_vlan(struct ixgbe_adapter *adapter, int add, int vid,
457 			     u32 vf)
458 {
459 	struct ixgbe_hw *hw = &adapter->hw;
460 	int err;
461 
462 	/* If VLAN overlaps with one the PF is currently monitoring make
463 	 * sure that we are able to allocate a VLVF entry.  This may be
464 	 * redundant but it guarantees PF will maintain visibility to
465 	 * the VLAN.
466 	 */
467 	if (add && test_bit(vid, adapter->active_vlans)) {
468 		err = hw->mac.ops.set_vfta(hw, vid, VMDQ_P(0), true, false);
469 		if (err)
470 			return err;
471 	}
472 
473 	err = hw->mac.ops.set_vfta(hw, vid, vf, !!add, false);
474 
475 	if (add && !err)
476 		return err;
477 
478 	/* If we failed to add the VF VLAN or we are removing the VF VLAN
479 	 * we may need to drop the PF pool bit in order to allow us to free
480 	 * up the VLVF resources.
481 	 */
482 	if (test_bit(vid, adapter->active_vlans) ||
483 	    (adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC))
484 		ixgbe_update_pf_promisc_vlvf(adapter, vid);
485 
486 	return err;
487 }
488 
489 static s32 ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf)
490 {
491 	struct ixgbe_hw *hw = &adapter->hw;
492 	int max_frame = msgbuf[1];
493 	u32 max_frs;
494 
495 	/*
496 	 * For 82599EB we have to keep all PFs and VFs operating with
497 	 * the same max_frame value in order to avoid sending an oversize
498 	 * frame to a VF.  In order to guarantee this is handled correctly
499 	 * for all cases we have several special exceptions to take into
500 	 * account before we can enable the VF for receive
501 	 */
502 	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
503 		struct net_device *dev = adapter->netdev;
504 		int pf_max_frame = dev->mtu + ETH_HLEN;
505 		u32 reg_offset, vf_shift, vfre;
506 		s32 err = 0;
507 
508 #ifdef CONFIG_FCOE
509 		if (dev->features & NETIF_F_FCOE_MTU)
510 			pf_max_frame = max_t(int, pf_max_frame,
511 					     IXGBE_FCOE_JUMBO_FRAME_SIZE);
512 
513 #endif /* CONFIG_FCOE */
514 		switch (adapter->vfinfo[vf].vf_api) {
515 		case ixgbe_mbox_api_11:
516 		case ixgbe_mbox_api_12:
517 		case ixgbe_mbox_api_13:
518 			/* Version 1.1 supports jumbo frames on VFs if PF has
519 			 * jumbo frames enabled which means legacy VFs are
520 			 * disabled
521 			 */
522 			if (pf_max_frame > ETH_FRAME_LEN)
523 				break;
524 			/* fall through */
525 		default:
526 			/* If the PF or VF are running w/ jumbo frames enabled
527 			 * we need to shut down the VF Rx path as we cannot
528 			 * support jumbo frames on legacy VFs
529 			 */
530 			if ((pf_max_frame > ETH_FRAME_LEN) ||
531 			    (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)))
532 				err = -EINVAL;
533 			break;
534 		}
535 
536 		/* determine VF receive enable location */
537 		vf_shift = vf % 32;
538 		reg_offset = vf / 32;
539 
540 		/* enable or disable receive depending on error */
541 		vfre = IXGBE_READ_REG(hw, IXGBE_VFRE(reg_offset));
542 		if (err)
543 			vfre &= ~BIT(vf_shift);
544 		else
545 			vfre |= BIT(vf_shift);
546 		IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), vfre);
547 
548 		if (err) {
549 			e_err(drv, "VF max_frame %d out of range\n", max_frame);
550 			return err;
551 		}
552 	}
553 
554 	/* MTU < 68 is an error and causes problems on some kernels */
555 	if (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE) {
556 		e_err(drv, "VF max_frame %d out of range\n", max_frame);
557 		return -EINVAL;
558 	}
559 
560 	/* pull current max frame size from hardware */
561 	max_frs = IXGBE_READ_REG(hw, IXGBE_MAXFRS);
562 	max_frs &= IXGBE_MHADD_MFS_MASK;
563 	max_frs >>= IXGBE_MHADD_MFS_SHIFT;
564 
565 	if (max_frs < max_frame) {
566 		max_frs = max_frame << IXGBE_MHADD_MFS_SHIFT;
567 		IXGBE_WRITE_REG(hw, IXGBE_MAXFRS, max_frs);
568 	}
569 
570 	e_info(hw, "VF requests change max MTU to %d\n", max_frame);
571 
572 	return 0;
573 }
574 
575 static void ixgbe_set_vmolr(struct ixgbe_hw *hw, u32 vf, bool aupe)
576 {
577 	u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf));
578 	vmolr |= IXGBE_VMOLR_BAM;
579 	if (aupe)
580 		vmolr |= IXGBE_VMOLR_AUPE;
581 	else
582 		vmolr &= ~IXGBE_VMOLR_AUPE;
583 	IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr);
584 }
585 
586 static void ixgbe_clear_vmvir(struct ixgbe_adapter *adapter, u32 vf)
587 {
588 	struct ixgbe_hw *hw = &adapter->hw;
589 
590 	IXGBE_WRITE_REG(hw, IXGBE_VMVIR(vf), 0);
591 }
592 
593 static void ixgbe_clear_vf_vlans(struct ixgbe_adapter *adapter, u32 vf)
594 {
595 	struct ixgbe_hw *hw = &adapter->hw;
596 	u32 vlvfb_mask, pool_mask, i;
597 
598 	/* create mask for VF and other pools */
599 	pool_mask = ~BIT(VMDQ_P(0) % 32);
600 	vlvfb_mask = BIT(vf % 32);
601 
602 	/* post increment loop, covers VLVF_ENTRIES - 1 to 0 */
603 	for (i = IXGBE_VLVF_ENTRIES; i--;) {
604 		u32 bits[2], vlvfb, vid, vfta, vlvf;
605 		u32 word = i * 2 + vf / 32;
606 		u32 mask;
607 
608 		vlvfb = IXGBE_READ_REG(hw, IXGBE_VLVFB(word));
609 
610 		/* if our bit isn't set we can skip it */
611 		if (!(vlvfb & vlvfb_mask))
612 			continue;
613 
614 		/* clear our bit from vlvfb */
615 		vlvfb ^= vlvfb_mask;
616 
617 		/* create 64b mask to chedk to see if we should clear VLVF */
618 		bits[word % 2] = vlvfb;
619 		bits[~word % 2] = IXGBE_READ_REG(hw, IXGBE_VLVFB(word ^ 1));
620 
621 		/* if other pools are present, just remove ourselves */
622 		if (bits[(VMDQ_P(0) / 32) ^ 1] ||
623 		    (bits[VMDQ_P(0) / 32] & pool_mask))
624 			goto update_vlvfb;
625 
626 		/* if PF is present, leave VFTA */
627 		if (bits[0] || bits[1])
628 			goto update_vlvf;
629 
630 		/* if we cannot determine VLAN just remove ourselves */
631 		vlvf = IXGBE_READ_REG(hw, IXGBE_VLVF(i));
632 		if (!vlvf)
633 			goto update_vlvfb;
634 
635 		vid = vlvf & VLAN_VID_MASK;
636 		mask = BIT(vid % 32);
637 
638 		/* clear bit from VFTA */
639 		vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(vid / 32));
640 		if (vfta & mask)
641 			IXGBE_WRITE_REG(hw, IXGBE_VFTA(vid / 32), vfta ^ mask);
642 update_vlvf:
643 		/* clear POOL selection enable */
644 		IXGBE_WRITE_REG(hw, IXGBE_VLVF(i), 0);
645 
646 		if (!(adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC))
647 			vlvfb = 0;
648 update_vlvfb:
649 		/* clear pool bits */
650 		IXGBE_WRITE_REG(hw, IXGBE_VLVFB(word), vlvfb);
651 	}
652 }
653 
654 static int ixgbe_set_vf_macvlan(struct ixgbe_adapter *adapter,
655 				int vf, int index, unsigned char *mac_addr)
656 {
657 	struct vf_macvlans *entry;
658 	struct list_head *pos;
659 	int retval = 0;
660 
661 	if (index <= 1) {
662 		list_for_each(pos, &adapter->vf_mvs.l) {
663 			entry = list_entry(pos, struct vf_macvlans, l);
664 			if (entry->vf == vf) {
665 				entry->vf = -1;
666 				entry->free = true;
667 				entry->is_macvlan = false;
668 				ixgbe_del_mac_filter(adapter,
669 						     entry->vf_macvlan, vf);
670 			}
671 		}
672 	}
673 
674 	/*
675 	 * If index was zero then we were asked to clear the uc list
676 	 * for the VF.  We're done.
677 	 */
678 	if (!index)
679 		return 0;
680 
681 	entry = NULL;
682 
683 	list_for_each(pos, &adapter->vf_mvs.l) {
684 		entry = list_entry(pos, struct vf_macvlans, l);
685 		if (entry->free)
686 			break;
687 	}
688 
689 	/*
690 	 * If we traversed the entire list and didn't find a free entry
691 	 * then we're out of space on the RAR table.  Also entry may
692 	 * be NULL because the original memory allocation for the list
693 	 * failed, which is not fatal but does mean we can't support
694 	 * VF requests for MACVLAN because we couldn't allocate
695 	 * memory for the list management required.
696 	 */
697 	if (!entry || !entry->free)
698 		return -ENOSPC;
699 
700 	retval = ixgbe_add_mac_filter(adapter, mac_addr, vf);
701 	if (retval < 0)
702 		return retval;
703 
704 	entry->free = false;
705 	entry->is_macvlan = true;
706 	entry->vf = vf;
707 	memcpy(entry->vf_macvlan, mac_addr, ETH_ALEN);
708 
709 	return 0;
710 }
711 
712 static inline void ixgbe_vf_reset_event(struct ixgbe_adapter *adapter, u32 vf)
713 {
714 	struct ixgbe_hw *hw = &adapter->hw;
715 	struct vf_data_storage *vfinfo = &adapter->vfinfo[vf];
716 	u8 num_tcs = adapter->hw_tcs;
717 
718 	/* remove VLAN filters beloning to this VF */
719 	ixgbe_clear_vf_vlans(adapter, vf);
720 
721 	/* add back PF assigned VLAN or VLAN 0 */
722 	ixgbe_set_vf_vlan(adapter, true, vfinfo->pf_vlan, vf);
723 
724 	/* reset offloads to defaults */
725 	ixgbe_set_vmolr(hw, vf, !vfinfo->pf_vlan);
726 
727 	/* set outgoing tags for VFs */
728 	if (!vfinfo->pf_vlan && !vfinfo->pf_qos && !num_tcs) {
729 		ixgbe_clear_vmvir(adapter, vf);
730 	} else {
731 		if (vfinfo->pf_qos || !num_tcs)
732 			ixgbe_set_vmvir(adapter, vfinfo->pf_vlan,
733 					vfinfo->pf_qos, vf);
734 		else
735 			ixgbe_set_vmvir(adapter, vfinfo->pf_vlan,
736 					adapter->default_up, vf);
737 
738 		if (vfinfo->spoofchk_enabled)
739 			hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf);
740 	}
741 
742 	/* reset multicast table array for vf */
743 	adapter->vfinfo[vf].num_vf_mc_hashes = 0;
744 
745 	/* Flush and reset the mta with the new values */
746 	ixgbe_set_rx_mode(adapter->netdev);
747 
748 	ixgbe_del_mac_filter(adapter, adapter->vfinfo[vf].vf_mac_addresses, vf);
749 	ixgbe_set_vf_macvlan(adapter, vf, 0, NULL);
750 
751 	/* reset VF api back to unknown */
752 	adapter->vfinfo[vf].vf_api = ixgbe_mbox_api_10;
753 }
754 
755 static int ixgbe_set_vf_mac(struct ixgbe_adapter *adapter,
756 			    int vf, unsigned char *mac_addr)
757 {
758 	s32 retval;
759 
760 	ixgbe_del_mac_filter(adapter, adapter->vfinfo[vf].vf_mac_addresses, vf);
761 	retval = ixgbe_add_mac_filter(adapter, mac_addr, vf);
762 	if (retval >= 0)
763 		memcpy(adapter->vfinfo[vf].vf_mac_addresses, mac_addr,
764 		       ETH_ALEN);
765 	else
766 		memset(adapter->vfinfo[vf].vf_mac_addresses, 0, ETH_ALEN);
767 
768 	return retval;
769 }
770 
771 int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask)
772 {
773 	struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
774 	unsigned int vfn = (event_mask & 0x3f);
775 
776 	bool enable = ((event_mask & 0x10000000U) != 0);
777 
778 	if (enable)
779 		eth_zero_addr(adapter->vfinfo[vfn].vf_mac_addresses);
780 
781 	return 0;
782 }
783 
784 static inline void ixgbe_write_qde(struct ixgbe_adapter *adapter, u32 vf,
785 				   u32 qde)
786 {
787 	struct ixgbe_hw *hw = &adapter->hw;
788 	struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
789 	u32 q_per_pool = __ALIGN_MASK(1, ~vmdq->mask);
790 	int i;
791 
792 	for (i = vf * q_per_pool; i < ((vf + 1) * q_per_pool); i++) {
793 		u32 reg;
794 
795 		/* flush previous write */
796 		IXGBE_WRITE_FLUSH(hw);
797 
798 		/* indicate to hardware that we want to set drop enable */
799 		reg = IXGBE_QDE_WRITE | qde;
800 		reg |= i <<  IXGBE_QDE_IDX_SHIFT;
801 		IXGBE_WRITE_REG(hw, IXGBE_QDE, reg);
802 	}
803 }
804 
805 static int ixgbe_vf_reset_msg(struct ixgbe_adapter *adapter, u32 vf)
806 {
807 	struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
808 	struct ixgbe_hw *hw = &adapter->hw;
809 	unsigned char *vf_mac = adapter->vfinfo[vf].vf_mac_addresses;
810 	u32 reg, reg_offset, vf_shift;
811 	u32 msgbuf[4] = {0, 0, 0, 0};
812 	u8 *addr = (u8 *)(&msgbuf[1]);
813 	u32 q_per_pool = __ALIGN_MASK(1, ~vmdq->mask);
814 	int i;
815 
816 	e_info(probe, "VF Reset msg received from vf %d\n", vf);
817 
818 	/* reset the filters for the device */
819 	ixgbe_vf_reset_event(adapter, vf);
820 
821 	/* set vf mac address */
822 	if (!is_zero_ether_addr(vf_mac))
823 		ixgbe_set_vf_mac(adapter, vf, vf_mac);
824 
825 	vf_shift = vf % 32;
826 	reg_offset = vf / 32;
827 
828 	/* enable transmit for vf */
829 	reg = IXGBE_READ_REG(hw, IXGBE_VFTE(reg_offset));
830 	reg |= BIT(vf_shift);
831 	IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset), reg);
832 
833 	/* force drop enable for all VF Rx queues */
834 	reg = IXGBE_QDE_ENABLE;
835 	if (adapter->vfinfo[vf].pf_vlan)
836 		reg |= IXGBE_QDE_HIDE_VLAN;
837 
838 	ixgbe_write_qde(adapter, vf, reg);
839 
840 	/* enable receive for vf */
841 	reg = IXGBE_READ_REG(hw, IXGBE_VFRE(reg_offset));
842 	reg |= BIT(vf_shift);
843 	/*
844 	 * The 82599 cannot support a mix of jumbo and non-jumbo PF/VFs.
845 	 * For more info take a look at ixgbe_set_vf_lpe
846 	 */
847 	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
848 		struct net_device *dev = adapter->netdev;
849 		int pf_max_frame = dev->mtu + ETH_HLEN;
850 
851 #ifdef CONFIG_FCOE
852 		if (dev->features & NETIF_F_FCOE_MTU)
853 			pf_max_frame = max_t(int, pf_max_frame,
854 					     IXGBE_FCOE_JUMBO_FRAME_SIZE);
855 
856 #endif /* CONFIG_FCOE */
857 		if (pf_max_frame > ETH_FRAME_LEN)
858 			reg &= ~BIT(vf_shift);
859 	}
860 	IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), reg);
861 
862 	/* enable VF mailbox for further messages */
863 	adapter->vfinfo[vf].clear_to_send = true;
864 
865 	/* Enable counting of spoofed packets in the SSVPC register */
866 	reg = IXGBE_READ_REG(hw, IXGBE_VMECM(reg_offset));
867 	reg |= BIT(vf_shift);
868 	IXGBE_WRITE_REG(hw, IXGBE_VMECM(reg_offset), reg);
869 
870 	/*
871 	 * Reset the VFs TDWBAL and TDWBAH registers
872 	 * which are not cleared by an FLR
873 	 */
874 	for (i = 0; i < q_per_pool; i++) {
875 		IXGBE_WRITE_REG(hw, IXGBE_PVFTDWBAHn(q_per_pool, vf, i), 0);
876 		IXGBE_WRITE_REG(hw, IXGBE_PVFTDWBALn(q_per_pool, vf, i), 0);
877 	}
878 
879 	/* reply to reset with ack and vf mac address */
880 	msgbuf[0] = IXGBE_VF_RESET;
881 	if (!is_zero_ether_addr(vf_mac)) {
882 		msgbuf[0] |= IXGBE_VT_MSGTYPE_ACK;
883 		memcpy(addr, vf_mac, ETH_ALEN);
884 	} else {
885 		msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
886 		dev_warn(&adapter->pdev->dev,
887 			 "VF %d has no MAC address assigned, you may have to assign one manually\n",
888 			 vf);
889 	}
890 
891 	/*
892 	 * Piggyback the multicast filter type so VF can compute the
893 	 * correct vectors
894 	 */
895 	msgbuf[3] = hw->mac.mc_filter_type;
896 	ixgbe_write_mbx(hw, msgbuf, IXGBE_VF_PERMADDR_MSG_LEN, vf);
897 
898 	return 0;
899 }
900 
901 static int ixgbe_set_vf_mac_addr(struct ixgbe_adapter *adapter,
902 				 u32 *msgbuf, u32 vf)
903 {
904 	u8 *new_mac = ((u8 *)(&msgbuf[1]));
905 
906 	if (!is_valid_ether_addr(new_mac)) {
907 		e_warn(drv, "VF %d attempted to set invalid mac\n", vf);
908 		return -1;
909 	}
910 
911 	if (adapter->vfinfo[vf].pf_set_mac && !adapter->vfinfo[vf].trusted &&
912 	    !ether_addr_equal(adapter->vfinfo[vf].vf_mac_addresses, new_mac)) {
913 		e_warn(drv,
914 		       "VF %d attempted to override administratively set MAC address\n"
915 		       "Reload the VF driver to resume operations\n",
916 		       vf);
917 		return -1;
918 	}
919 
920 	return ixgbe_set_vf_mac(adapter, vf, new_mac) < 0;
921 }
922 
923 static int ixgbe_set_vf_vlan_msg(struct ixgbe_adapter *adapter,
924 				 u32 *msgbuf, u32 vf)
925 {
926 	u32 add = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) >> IXGBE_VT_MSGINFO_SHIFT;
927 	u32 vid = (msgbuf[1] & IXGBE_VLVF_VLANID_MASK);
928 	u8 tcs = adapter->hw_tcs;
929 
930 	if (adapter->vfinfo[vf].pf_vlan || tcs) {
931 		e_warn(drv,
932 		       "VF %d attempted to override administratively set VLAN configuration\n"
933 		       "Reload the VF driver to resume operations\n",
934 		       vf);
935 		return -1;
936 	}
937 
938 	/* VLAN 0 is a special case, don't allow it to be removed */
939 	if (!vid && !add)
940 		return 0;
941 
942 	return ixgbe_set_vf_vlan(adapter, add, vid, vf);
943 }
944 
945 static int ixgbe_set_vf_macvlan_msg(struct ixgbe_adapter *adapter,
946 				    u32 *msgbuf, u32 vf)
947 {
948 	u8 *new_mac = ((u8 *)(&msgbuf[1]));
949 	int index = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) >>
950 		    IXGBE_VT_MSGINFO_SHIFT;
951 	int err;
952 
953 	if (adapter->vfinfo[vf].pf_set_mac && !adapter->vfinfo[vf].trusted &&
954 	    index > 0) {
955 		e_warn(drv,
956 		       "VF %d requested MACVLAN filter but is administratively denied\n",
957 		       vf);
958 		return -1;
959 	}
960 
961 	/* An non-zero index indicates the VF is setting a filter */
962 	if (index) {
963 		if (!is_valid_ether_addr(new_mac)) {
964 			e_warn(drv, "VF %d attempted to set invalid mac\n", vf);
965 			return -1;
966 		}
967 
968 		/*
969 		 * If the VF is allowed to set MAC filters then turn off
970 		 * anti-spoofing to avoid false positives.
971 		 */
972 		if (adapter->vfinfo[vf].spoofchk_enabled) {
973 			struct ixgbe_hw *hw = &adapter->hw;
974 
975 			hw->mac.ops.set_mac_anti_spoofing(hw, false, vf);
976 			hw->mac.ops.set_vlan_anti_spoofing(hw, false, vf);
977 		}
978 	}
979 
980 	err = ixgbe_set_vf_macvlan(adapter, vf, index, new_mac);
981 	if (err == -ENOSPC)
982 		e_warn(drv,
983 		       "VF %d has requested a MACVLAN filter but there is no space for it\n",
984 		       vf);
985 
986 	return err < 0;
987 }
988 
989 static int ixgbe_negotiate_vf_api(struct ixgbe_adapter *adapter,
990 				  u32 *msgbuf, u32 vf)
991 {
992 	int api = msgbuf[1];
993 
994 	switch (api) {
995 	case ixgbe_mbox_api_10:
996 	case ixgbe_mbox_api_11:
997 	case ixgbe_mbox_api_12:
998 	case ixgbe_mbox_api_13:
999 		adapter->vfinfo[vf].vf_api = api;
1000 		return 0;
1001 	default:
1002 		break;
1003 	}
1004 
1005 	e_info(drv, "VF %d requested invalid api version %u\n", vf, api);
1006 
1007 	return -1;
1008 }
1009 
1010 static int ixgbe_get_vf_queues(struct ixgbe_adapter *adapter,
1011 			       u32 *msgbuf, u32 vf)
1012 {
1013 	struct net_device *dev = adapter->netdev;
1014 	struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
1015 	unsigned int default_tc = 0;
1016 	u8 num_tcs = adapter->hw_tcs;
1017 
1018 	/* verify the PF is supporting the correct APIs */
1019 	switch (adapter->vfinfo[vf].vf_api) {
1020 	case ixgbe_mbox_api_20:
1021 	case ixgbe_mbox_api_11:
1022 	case ixgbe_mbox_api_12:
1023 	case ixgbe_mbox_api_13:
1024 		break;
1025 	default:
1026 		return -1;
1027 	}
1028 
1029 	/* only allow 1 Tx queue for bandwidth limiting */
1030 	msgbuf[IXGBE_VF_TX_QUEUES] = __ALIGN_MASK(1, ~vmdq->mask);
1031 	msgbuf[IXGBE_VF_RX_QUEUES] = __ALIGN_MASK(1, ~vmdq->mask);
1032 
1033 	/* if TCs > 1 determine which TC belongs to default user priority */
1034 	if (num_tcs > 1)
1035 		default_tc = netdev_get_prio_tc_map(dev, adapter->default_up);
1036 
1037 	/* notify VF of need for VLAN tag stripping, and correct queue */
1038 	if (num_tcs)
1039 		msgbuf[IXGBE_VF_TRANS_VLAN] = num_tcs;
1040 	else if (adapter->vfinfo[vf].pf_vlan || adapter->vfinfo[vf].pf_qos)
1041 		msgbuf[IXGBE_VF_TRANS_VLAN] = 1;
1042 	else
1043 		msgbuf[IXGBE_VF_TRANS_VLAN] = 0;
1044 
1045 	/* notify VF of default queue */
1046 	msgbuf[IXGBE_VF_DEF_QUEUE] = default_tc;
1047 
1048 	return 0;
1049 }
1050 
1051 static int ixgbe_get_vf_reta(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf)
1052 {
1053 	u32 i, j;
1054 	u32 *out_buf = &msgbuf[1];
1055 	const u8 *reta = adapter->rss_indir_tbl;
1056 	u32 reta_size = ixgbe_rss_indir_tbl_entries(adapter);
1057 
1058 	/* Check if operation is permitted */
1059 	if (!adapter->vfinfo[vf].rss_query_enabled)
1060 		return -EPERM;
1061 
1062 	/* verify the PF is supporting the correct API */
1063 	switch (adapter->vfinfo[vf].vf_api) {
1064 	case ixgbe_mbox_api_13:
1065 	case ixgbe_mbox_api_12:
1066 		break;
1067 	default:
1068 		return -EOPNOTSUPP;
1069 	}
1070 
1071 	/* This mailbox command is supported (required) only for 82599 and x540
1072 	 * VFs which support up to 4 RSS queues. Therefore we will compress the
1073 	 * RETA by saving only 2 bits from each entry. This way we will be able
1074 	 * to transfer the whole RETA in a single mailbox operation.
1075 	 */
1076 	for (i = 0; i < reta_size / 16; i++) {
1077 		out_buf[i] = 0;
1078 		for (j = 0; j < 16; j++)
1079 			out_buf[i] |= (u32)(reta[16 * i + j] & 0x3) << (2 * j);
1080 	}
1081 
1082 	return 0;
1083 }
1084 
1085 static int ixgbe_get_vf_rss_key(struct ixgbe_adapter *adapter,
1086 				u32 *msgbuf, u32 vf)
1087 {
1088 	u32 *rss_key = &msgbuf[1];
1089 
1090 	/* Check if the operation is permitted */
1091 	if (!adapter->vfinfo[vf].rss_query_enabled)
1092 		return -EPERM;
1093 
1094 	/* verify the PF is supporting the correct API */
1095 	switch (adapter->vfinfo[vf].vf_api) {
1096 	case ixgbe_mbox_api_13:
1097 	case ixgbe_mbox_api_12:
1098 		break;
1099 	default:
1100 		return -EOPNOTSUPP;
1101 	}
1102 
1103 	memcpy(rss_key, adapter->rss_key, IXGBE_RSS_KEY_SIZE);
1104 
1105 	return 0;
1106 }
1107 
1108 static int ixgbe_update_vf_xcast_mode(struct ixgbe_adapter *adapter,
1109 				      u32 *msgbuf, u32 vf)
1110 {
1111 	struct ixgbe_hw *hw = &adapter->hw;
1112 	int xcast_mode = msgbuf[1];
1113 	u32 vmolr, fctrl, disable, enable;
1114 
1115 	/* verify the PF is supporting the correct APIs */
1116 	switch (adapter->vfinfo[vf].vf_api) {
1117 	case ixgbe_mbox_api_12:
1118 		/* promisc introduced in 1.3 version */
1119 		if (xcast_mode == IXGBEVF_XCAST_MODE_PROMISC)
1120 			return -EOPNOTSUPP;
1121 		/* Fall threw */
1122 	case ixgbe_mbox_api_13:
1123 		break;
1124 	default:
1125 		return -EOPNOTSUPP;
1126 	}
1127 
1128 	if (xcast_mode > IXGBEVF_XCAST_MODE_MULTI &&
1129 	    !adapter->vfinfo[vf].trusted) {
1130 		xcast_mode = IXGBEVF_XCAST_MODE_MULTI;
1131 	}
1132 
1133 	if (adapter->vfinfo[vf].xcast_mode == xcast_mode)
1134 		goto out;
1135 
1136 	switch (xcast_mode) {
1137 	case IXGBEVF_XCAST_MODE_NONE:
1138 		disable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE |
1139 			  IXGBE_VMOLR_MPE | IXGBE_VMOLR_UPE | IXGBE_VMOLR_VPE;
1140 		enable = 0;
1141 		break;
1142 	case IXGBEVF_XCAST_MODE_MULTI:
1143 		disable = IXGBE_VMOLR_MPE | IXGBE_VMOLR_UPE | IXGBE_VMOLR_VPE;
1144 		enable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE;
1145 		break;
1146 	case IXGBEVF_XCAST_MODE_ALLMULTI:
1147 		disable = IXGBE_VMOLR_UPE | IXGBE_VMOLR_VPE;
1148 		enable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE | IXGBE_VMOLR_MPE;
1149 		break;
1150 	case IXGBEVF_XCAST_MODE_PROMISC:
1151 		if (hw->mac.type <= ixgbe_mac_82599EB)
1152 			return -EOPNOTSUPP;
1153 
1154 		fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
1155 		if (!(fctrl & IXGBE_FCTRL_UPE)) {
1156 			/* VF promisc requires PF in promisc */
1157 			e_warn(drv,
1158 			       "Enabling VF promisc requires PF in promisc\n");
1159 			return -EPERM;
1160 		}
1161 
1162 		disable = 0;
1163 		enable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE |
1164 			 IXGBE_VMOLR_MPE | IXGBE_VMOLR_UPE | IXGBE_VMOLR_VPE;
1165 		break;
1166 	default:
1167 		return -EOPNOTSUPP;
1168 	}
1169 
1170 	vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf));
1171 	vmolr &= ~disable;
1172 	vmolr |= enable;
1173 	IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr);
1174 
1175 	adapter->vfinfo[vf].xcast_mode = xcast_mode;
1176 
1177 out:
1178 	msgbuf[1] = xcast_mode;
1179 
1180 	return 0;
1181 }
1182 
1183 static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
1184 {
1185 	u32 mbx_size = IXGBE_VFMAILBOX_SIZE;
1186 	u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
1187 	struct ixgbe_hw *hw = &adapter->hw;
1188 	s32 retval;
1189 
1190 	retval = ixgbe_read_mbx(hw, msgbuf, mbx_size, vf);
1191 
1192 	if (retval) {
1193 		pr_err("Error receiving message from VF\n");
1194 		return retval;
1195 	}
1196 
1197 	/* this is a message we already processed, do nothing */
1198 	if (msgbuf[0] & (IXGBE_VT_MSGTYPE_ACK | IXGBE_VT_MSGTYPE_NACK))
1199 		return 0;
1200 
1201 	/* flush the ack before we write any messages back */
1202 	IXGBE_WRITE_FLUSH(hw);
1203 
1204 	if (msgbuf[0] == IXGBE_VF_RESET)
1205 		return ixgbe_vf_reset_msg(adapter, vf);
1206 
1207 	/*
1208 	 * until the vf completes a virtual function reset it should not be
1209 	 * allowed to start any configuration.
1210 	 */
1211 	if (!adapter->vfinfo[vf].clear_to_send) {
1212 		msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
1213 		ixgbe_write_mbx(hw, msgbuf, 1, vf);
1214 		return 0;
1215 	}
1216 
1217 	switch ((msgbuf[0] & 0xFFFF)) {
1218 	case IXGBE_VF_SET_MAC_ADDR:
1219 		retval = ixgbe_set_vf_mac_addr(adapter, msgbuf, vf);
1220 		break;
1221 	case IXGBE_VF_SET_MULTICAST:
1222 		retval = ixgbe_set_vf_multicasts(adapter, msgbuf, vf);
1223 		break;
1224 	case IXGBE_VF_SET_VLAN:
1225 		retval = ixgbe_set_vf_vlan_msg(adapter, msgbuf, vf);
1226 		break;
1227 	case IXGBE_VF_SET_LPE:
1228 		retval = ixgbe_set_vf_lpe(adapter, msgbuf, vf);
1229 		break;
1230 	case IXGBE_VF_SET_MACVLAN:
1231 		retval = ixgbe_set_vf_macvlan_msg(adapter, msgbuf, vf);
1232 		break;
1233 	case IXGBE_VF_API_NEGOTIATE:
1234 		retval = ixgbe_negotiate_vf_api(adapter, msgbuf, vf);
1235 		break;
1236 	case IXGBE_VF_GET_QUEUES:
1237 		retval = ixgbe_get_vf_queues(adapter, msgbuf, vf);
1238 		break;
1239 	case IXGBE_VF_GET_RETA:
1240 		retval = ixgbe_get_vf_reta(adapter, msgbuf, vf);
1241 		break;
1242 	case IXGBE_VF_GET_RSS_KEY:
1243 		retval = ixgbe_get_vf_rss_key(adapter, msgbuf, vf);
1244 		break;
1245 	case IXGBE_VF_UPDATE_XCAST_MODE:
1246 		retval = ixgbe_update_vf_xcast_mode(adapter, msgbuf, vf);
1247 		break;
1248 	default:
1249 		e_err(drv, "Unhandled Msg %8.8x\n", msgbuf[0]);
1250 		retval = IXGBE_ERR_MBX;
1251 		break;
1252 	}
1253 
1254 	/* notify the VF of the results of what it sent us */
1255 	if (retval)
1256 		msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
1257 	else
1258 		msgbuf[0] |= IXGBE_VT_MSGTYPE_ACK;
1259 
1260 	msgbuf[0] |= IXGBE_VT_MSGTYPE_CTS;
1261 
1262 	ixgbe_write_mbx(hw, msgbuf, mbx_size, vf);
1263 
1264 	return retval;
1265 }
1266 
1267 static void ixgbe_rcv_ack_from_vf(struct ixgbe_adapter *adapter, u32 vf)
1268 {
1269 	struct ixgbe_hw *hw = &adapter->hw;
1270 	u32 msg = IXGBE_VT_MSGTYPE_NACK;
1271 
1272 	/* if device isn't clear to send it shouldn't be reading either */
1273 	if (!adapter->vfinfo[vf].clear_to_send)
1274 		ixgbe_write_mbx(hw, &msg, 1, vf);
1275 }
1276 
1277 void ixgbe_msg_task(struct ixgbe_adapter *adapter)
1278 {
1279 	struct ixgbe_hw *hw = &adapter->hw;
1280 	u32 vf;
1281 
1282 	for (vf = 0; vf < adapter->num_vfs; vf++) {
1283 		/* process any reset requests */
1284 		if (!ixgbe_check_for_rst(hw, vf))
1285 			ixgbe_vf_reset_event(adapter, vf);
1286 
1287 		/* process any messages pending */
1288 		if (!ixgbe_check_for_msg(hw, vf))
1289 			ixgbe_rcv_msg_from_vf(adapter, vf);
1290 
1291 		/* process any acks */
1292 		if (!ixgbe_check_for_ack(hw, vf))
1293 			ixgbe_rcv_ack_from_vf(adapter, vf);
1294 	}
1295 }
1296 
1297 void ixgbe_disable_tx_rx(struct ixgbe_adapter *adapter)
1298 {
1299 	struct ixgbe_hw *hw = &adapter->hw;
1300 
1301 	/* disable transmit and receive for all vfs */
1302 	IXGBE_WRITE_REG(hw, IXGBE_VFTE(0), 0);
1303 	IXGBE_WRITE_REG(hw, IXGBE_VFTE(1), 0);
1304 
1305 	IXGBE_WRITE_REG(hw, IXGBE_VFRE(0), 0);
1306 	IXGBE_WRITE_REG(hw, IXGBE_VFRE(1), 0);
1307 }
1308 
1309 static inline void ixgbe_ping_vf(struct ixgbe_adapter *adapter, int vf)
1310 {
1311 	struct ixgbe_hw *hw = &adapter->hw;
1312 	u32 ping;
1313 
1314 	ping = IXGBE_PF_CONTROL_MSG;
1315 	if (adapter->vfinfo[vf].clear_to_send)
1316 		ping |= IXGBE_VT_MSGTYPE_CTS;
1317 	ixgbe_write_mbx(hw, &ping, 1, vf);
1318 }
1319 
1320 void ixgbe_ping_all_vfs(struct ixgbe_adapter *adapter)
1321 {
1322 	struct ixgbe_hw *hw = &adapter->hw;
1323 	u32 ping;
1324 	int i;
1325 
1326 	for (i = 0 ; i < adapter->num_vfs; i++) {
1327 		ping = IXGBE_PF_CONTROL_MSG;
1328 		if (adapter->vfinfo[i].clear_to_send)
1329 			ping |= IXGBE_VT_MSGTYPE_CTS;
1330 		ixgbe_write_mbx(hw, &ping, 1, i);
1331 	}
1332 }
1333 
1334 int ixgbe_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
1335 {
1336 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
1337 	s32 retval;
1338 
1339 	if (vf >= adapter->num_vfs)
1340 		return -EINVAL;
1341 
1342 	if (is_valid_ether_addr(mac)) {
1343 		dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n",
1344 			 mac, vf);
1345 		dev_info(&adapter->pdev->dev, "Reload the VF driver to make this change effective.");
1346 
1347 		retval = ixgbe_set_vf_mac(adapter, vf, mac);
1348 		if (retval >= 0) {
1349 			adapter->vfinfo[vf].pf_set_mac = true;
1350 
1351 			if (test_bit(__IXGBE_DOWN, &adapter->state)) {
1352 				dev_warn(&adapter->pdev->dev, "The VF MAC address has been set, but the PF device is not up.\n");
1353 				dev_warn(&adapter->pdev->dev, "Bring the PF device up before attempting to use the VF device.\n");
1354 			}
1355 		} else {
1356 			dev_warn(&adapter->pdev->dev, "The VF MAC address was NOT set due to invalid or duplicate MAC address.\n");
1357 		}
1358 	} else if (is_zero_ether_addr(mac)) {
1359 		unsigned char *vf_mac_addr =
1360 					   adapter->vfinfo[vf].vf_mac_addresses;
1361 
1362 		/* nothing to do */
1363 		if (is_zero_ether_addr(vf_mac_addr))
1364 			return 0;
1365 
1366 		dev_info(&adapter->pdev->dev, "removing MAC on VF %d\n", vf);
1367 
1368 		retval = ixgbe_del_mac_filter(adapter, vf_mac_addr, vf);
1369 		if (retval >= 0) {
1370 			adapter->vfinfo[vf].pf_set_mac = false;
1371 			memcpy(vf_mac_addr, mac, ETH_ALEN);
1372 		} else {
1373 			dev_warn(&adapter->pdev->dev, "Could NOT remove the VF MAC address.\n");
1374 		}
1375 	} else {
1376 		retval = -EINVAL;
1377 	}
1378 
1379 	return retval;
1380 }
1381 
1382 static int ixgbe_enable_port_vlan(struct ixgbe_adapter *adapter, int vf,
1383 				  u16 vlan, u8 qos)
1384 {
1385 	struct ixgbe_hw *hw = &adapter->hw;
1386 	int err;
1387 
1388 	err = ixgbe_set_vf_vlan(adapter, true, vlan, vf);
1389 	if (err)
1390 		goto out;
1391 
1392 	/* Revoke tagless access via VLAN 0 */
1393 	ixgbe_set_vf_vlan(adapter, false, 0, vf);
1394 
1395 	ixgbe_set_vmvir(adapter, vlan, qos, vf);
1396 	ixgbe_set_vmolr(hw, vf, false);
1397 
1398 	/* enable hide vlan on X550 */
1399 	if (hw->mac.type >= ixgbe_mac_X550)
1400 		ixgbe_write_qde(adapter, vf, IXGBE_QDE_ENABLE |
1401 				IXGBE_QDE_HIDE_VLAN);
1402 
1403 	adapter->vfinfo[vf].pf_vlan = vlan;
1404 	adapter->vfinfo[vf].pf_qos = qos;
1405 	dev_info(&adapter->pdev->dev,
1406 		 "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf);
1407 	if (test_bit(__IXGBE_DOWN, &adapter->state)) {
1408 		dev_warn(&adapter->pdev->dev,
1409 			 "The VF VLAN has been set, but the PF device is not up.\n");
1410 		dev_warn(&adapter->pdev->dev,
1411 			 "Bring the PF device up before attempting to use the VF device.\n");
1412 	}
1413 
1414 out:
1415 	return err;
1416 }
1417 
1418 static int ixgbe_disable_port_vlan(struct ixgbe_adapter *adapter, int vf)
1419 {
1420 	struct ixgbe_hw *hw = &adapter->hw;
1421 	int err;
1422 
1423 	err = ixgbe_set_vf_vlan(adapter, false,
1424 				adapter->vfinfo[vf].pf_vlan, vf);
1425 	/* Restore tagless access via VLAN 0 */
1426 	ixgbe_set_vf_vlan(adapter, true, 0, vf);
1427 	ixgbe_clear_vmvir(adapter, vf);
1428 	ixgbe_set_vmolr(hw, vf, true);
1429 
1430 	/* disable hide VLAN on X550 */
1431 	if (hw->mac.type >= ixgbe_mac_X550)
1432 		ixgbe_write_qde(adapter, vf, IXGBE_QDE_ENABLE);
1433 
1434 	adapter->vfinfo[vf].pf_vlan = 0;
1435 	adapter->vfinfo[vf].pf_qos = 0;
1436 
1437 	return err;
1438 }
1439 
1440 int ixgbe_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan,
1441 			  u8 qos, __be16 vlan_proto)
1442 {
1443 	int err = 0;
1444 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
1445 
1446 	if ((vf >= adapter->num_vfs) || (vlan > 4095) || (qos > 7))
1447 		return -EINVAL;
1448 	if (vlan_proto != htons(ETH_P_8021Q))
1449 		return -EPROTONOSUPPORT;
1450 	if (vlan || qos) {
1451 		/* Check if there is already a port VLAN set, if so
1452 		 * we have to delete the old one first before we
1453 		 * can set the new one.  The usage model had
1454 		 * previously assumed the user would delete the
1455 		 * old port VLAN before setting a new one but this
1456 		 * is not necessarily the case.
1457 		 */
1458 		if (adapter->vfinfo[vf].pf_vlan)
1459 			err = ixgbe_disable_port_vlan(adapter, vf);
1460 		if (err)
1461 			goto out;
1462 		err = ixgbe_enable_port_vlan(adapter, vf, vlan, qos);
1463 	} else {
1464 		err = ixgbe_disable_port_vlan(adapter, vf);
1465 	}
1466 
1467 out:
1468 	return err;
1469 }
1470 
1471 int ixgbe_link_mbps(struct ixgbe_adapter *adapter)
1472 {
1473 	switch (adapter->link_speed) {
1474 	case IXGBE_LINK_SPEED_100_FULL:
1475 		return 100;
1476 	case IXGBE_LINK_SPEED_1GB_FULL:
1477 		return 1000;
1478 	case IXGBE_LINK_SPEED_10GB_FULL:
1479 		return 10000;
1480 	default:
1481 		return 0;
1482 	}
1483 }
1484 
1485 static void ixgbe_set_vf_rate_limit(struct ixgbe_adapter *adapter, int vf)
1486 {
1487 	struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
1488 	struct ixgbe_hw *hw = &adapter->hw;
1489 	u32 bcnrc_val = 0;
1490 	u16 queue, queues_per_pool;
1491 	u16 tx_rate = adapter->vfinfo[vf].tx_rate;
1492 
1493 	if (tx_rate) {
1494 		/* start with base link speed value */
1495 		bcnrc_val = adapter->vf_rate_link_speed;
1496 
1497 		/* Calculate the rate factor values to set */
1498 		bcnrc_val <<= IXGBE_RTTBCNRC_RF_INT_SHIFT;
1499 		bcnrc_val /= tx_rate;
1500 
1501 		/* clear everything but the rate factor */
1502 		bcnrc_val &= IXGBE_RTTBCNRC_RF_INT_MASK |
1503 			     IXGBE_RTTBCNRC_RF_DEC_MASK;
1504 
1505 		/* enable the rate scheduler */
1506 		bcnrc_val |= IXGBE_RTTBCNRC_RS_ENA;
1507 	}
1508 
1509 	/*
1510 	 * Set global transmit compensation time to the MMW_SIZE in RTTBCNRM
1511 	 * register. Typically MMW_SIZE=0x014 if 9728-byte jumbo is supported
1512 	 * and 0x004 otherwise.
1513 	 */
1514 	switch (hw->mac.type) {
1515 	case ixgbe_mac_82599EB:
1516 		IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRM, 0x4);
1517 		break;
1518 	case ixgbe_mac_X540:
1519 		IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRM, 0x14);
1520 		break;
1521 	default:
1522 		break;
1523 	}
1524 
1525 	/* determine how many queues per pool based on VMDq mask */
1526 	queues_per_pool = __ALIGN_MASK(1, ~vmdq->mask);
1527 
1528 	/* write value for all Tx queues belonging to VF */
1529 	for (queue = 0; queue < queues_per_pool; queue++) {
1530 		unsigned int reg_idx = (vf * queues_per_pool) + queue;
1531 
1532 		IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, reg_idx);
1533 		IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, bcnrc_val);
1534 	}
1535 }
1536 
1537 void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter)
1538 {
1539 	int i;
1540 
1541 	/* VF Tx rate limit was not set */
1542 	if (!adapter->vf_rate_link_speed)
1543 		return;
1544 
1545 	if (ixgbe_link_mbps(adapter) != adapter->vf_rate_link_speed) {
1546 		adapter->vf_rate_link_speed = 0;
1547 		dev_info(&adapter->pdev->dev,
1548 			 "Link speed has been changed. VF Transmit rate is disabled\n");
1549 	}
1550 
1551 	for (i = 0; i < adapter->num_vfs; i++) {
1552 		if (!adapter->vf_rate_link_speed)
1553 			adapter->vfinfo[i].tx_rate = 0;
1554 
1555 		ixgbe_set_vf_rate_limit(adapter, i);
1556 	}
1557 }
1558 
1559 int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int min_tx_rate,
1560 			int max_tx_rate)
1561 {
1562 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
1563 	int link_speed;
1564 
1565 	/* verify VF is active */
1566 	if (vf >= adapter->num_vfs)
1567 		return -EINVAL;
1568 
1569 	/* verify link is up */
1570 	if (!adapter->link_up)
1571 		return -EINVAL;
1572 
1573 	/* verify we are linked at 10Gbps */
1574 	link_speed = ixgbe_link_mbps(adapter);
1575 	if (link_speed != 10000)
1576 		return -EINVAL;
1577 
1578 	if (min_tx_rate)
1579 		return -EINVAL;
1580 
1581 	/* rate limit cannot be less than 10Mbs or greater than link speed */
1582 	if (max_tx_rate && ((max_tx_rate <= 10) || (max_tx_rate > link_speed)))
1583 		return -EINVAL;
1584 
1585 	/* store values */
1586 	adapter->vf_rate_link_speed = link_speed;
1587 	adapter->vfinfo[vf].tx_rate = max_tx_rate;
1588 
1589 	/* update hardware configuration */
1590 	ixgbe_set_vf_rate_limit(adapter, vf);
1591 
1592 	return 0;
1593 }
1594 
1595 int ixgbe_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, bool setting)
1596 {
1597 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
1598 	struct ixgbe_hw *hw = &adapter->hw;
1599 
1600 	if (vf >= adapter->num_vfs)
1601 		return -EINVAL;
1602 
1603 	adapter->vfinfo[vf].spoofchk_enabled = setting;
1604 
1605 	/* configure MAC spoofing */
1606 	hw->mac.ops.set_mac_anti_spoofing(hw, setting, vf);
1607 
1608 	/* configure VLAN spoofing */
1609 	hw->mac.ops.set_vlan_anti_spoofing(hw, setting, vf);
1610 
1611 	/* Ensure LLDP and FC is set for Ethertype Antispoofing if we will be
1612 	 * calling set_ethertype_anti_spoofing for each VF in loop below
1613 	 */
1614 	if (hw->mac.ops.set_ethertype_anti_spoofing) {
1615 		IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_LLDP),
1616 				(IXGBE_ETQF_FILTER_EN    |
1617 				 IXGBE_ETQF_TX_ANTISPOOF |
1618 				 IXGBE_ETH_P_LLDP));
1619 
1620 		IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_FC),
1621 				(IXGBE_ETQF_FILTER_EN |
1622 				 IXGBE_ETQF_TX_ANTISPOOF |
1623 				 ETH_P_PAUSE));
1624 
1625 		hw->mac.ops.set_ethertype_anti_spoofing(hw, setting, vf);
1626 	}
1627 
1628 	return 0;
1629 }
1630 
1631 int ixgbe_ndo_set_vf_rss_query_en(struct net_device *netdev, int vf,
1632 				  bool setting)
1633 {
1634 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
1635 
1636 	/* This operation is currently supported only for 82599 and x540
1637 	 * devices.
1638 	 */
1639 	if (adapter->hw.mac.type < ixgbe_mac_82599EB ||
1640 	    adapter->hw.mac.type >= ixgbe_mac_X550)
1641 		return -EOPNOTSUPP;
1642 
1643 	if (vf >= adapter->num_vfs)
1644 		return -EINVAL;
1645 
1646 	adapter->vfinfo[vf].rss_query_enabled = setting;
1647 
1648 	return 0;
1649 }
1650 
1651 int ixgbe_ndo_set_vf_trust(struct net_device *netdev, int vf, bool setting)
1652 {
1653 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
1654 
1655 	if (vf >= adapter->num_vfs)
1656 		return -EINVAL;
1657 
1658 	/* nothing to do */
1659 	if (adapter->vfinfo[vf].trusted == setting)
1660 		return 0;
1661 
1662 	adapter->vfinfo[vf].trusted = setting;
1663 
1664 	/* reset VF to reconfigure features */
1665 	adapter->vfinfo[vf].clear_to_send = false;
1666 	ixgbe_ping_vf(adapter, vf);
1667 
1668 	e_info(drv, "VF %u is %strusted\n", vf, setting ? "" : "not ");
1669 
1670 	return 0;
1671 }
1672 
1673 int ixgbe_ndo_get_vf_config(struct net_device *netdev,
1674 			    int vf, struct ifla_vf_info *ivi)
1675 {
1676 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
1677 	if (vf >= adapter->num_vfs)
1678 		return -EINVAL;
1679 	ivi->vf = vf;
1680 	memcpy(&ivi->mac, adapter->vfinfo[vf].vf_mac_addresses, ETH_ALEN);
1681 	ivi->max_tx_rate = adapter->vfinfo[vf].tx_rate;
1682 	ivi->min_tx_rate = 0;
1683 	ivi->vlan = adapter->vfinfo[vf].pf_vlan;
1684 	ivi->qos = adapter->vfinfo[vf].pf_qos;
1685 	ivi->spoofchk = adapter->vfinfo[vf].spoofchk_enabled;
1686 	ivi->rss_query_en = adapter->vfinfo[vf].rss_query_enabled;
1687 	ivi->trusted = adapter->vfinfo[vf].trusted;
1688 	return 0;
1689 }
1690