1 /******************************************************************************* 2 3 Intel 10 Gigabit PCI Express Linux driver 4 Copyright(c) 1999 - 2016 Intel Corporation. 5 6 This program is free software; you can redistribute it and/or modify it 7 under the terms and conditions of the GNU General Public License, 8 version 2, as published by the Free Software Foundation. 9 10 This program is distributed in the hope it will be useful, but WITHOUT 11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 13 more details. 14 15 You should have received a copy of the GNU General Public License along with 16 this program; if not, write to the Free Software Foundation, Inc., 17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 18 19 The full GNU General Public License is included in this distribution in 20 the file called "COPYING". 21 22 Contact Information: 23 Linux NICS <linux.nics@intel.com> 24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> 25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 26 27 *******************************************************************************/ 28 29 #include <linux/pci.h> 30 #include <linux/delay.h> 31 #include <linux/sched.h> 32 33 #include "ixgbe.h" 34 #include "ixgbe_phy.h" 35 36 #define IXGBE_82598_MAX_TX_QUEUES 32 37 #define IXGBE_82598_MAX_RX_QUEUES 64 38 #define IXGBE_82598_RAR_ENTRIES 16 39 #define IXGBE_82598_MC_TBL_SIZE 128 40 #define IXGBE_82598_VFT_TBL_SIZE 128 41 #define IXGBE_82598_RX_PB_SIZE 512 42 43 static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, 44 ixgbe_link_speed speed, 45 bool autoneg_wait_to_complete); 46 static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, 47 u8 *eeprom_data); 48 49 /** 50 * ixgbe_set_pcie_completion_timeout - set pci-e completion timeout 51 * @hw: pointer to the HW structure 52 * 53 * The defaults for 82598 should be in the range of 50us to 50ms, 54 * however the hardware default for these parts is 500us to 1ms which is less 55 * than the 10ms recommended by the pci-e spec. To address this we need to 56 * increase the value to either 10ms to 250ms for capability version 1 config, 57 * or 16ms to 55ms for version 2. 58 **/ 59 static void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw) 60 { 61 u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR); 62 u16 pcie_devctl2; 63 64 if (ixgbe_removed(hw->hw_addr)) 65 return; 66 67 /* only take action if timeout value is defaulted to 0 */ 68 if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK) 69 goto out; 70 71 /* 72 * if capababilities version is type 1 we can write the 73 * timeout of 10ms to 250ms through the GCR register 74 */ 75 if (!(gcr & IXGBE_GCR_CAP_VER2)) { 76 gcr |= IXGBE_GCR_CMPL_TMOUT_10ms; 77 goto out; 78 } 79 80 /* 81 * for version 2 capabilities we need to write the config space 82 * directly in order to set the completion timeout value for 83 * 16ms to 55ms 84 */ 85 pcie_devctl2 = ixgbe_read_pci_cfg_word(hw, IXGBE_PCI_DEVICE_CONTROL2); 86 pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms; 87 ixgbe_write_pci_cfg_word(hw, IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2); 88 out: 89 /* disable completion timeout resend */ 90 gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND; 91 IXGBE_WRITE_REG(hw, IXGBE_GCR, gcr); 92 } 93 94 static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw) 95 { 96 struct ixgbe_mac_info *mac = &hw->mac; 97 98 /* Call PHY identify routine to get the phy type */ 99 ixgbe_identify_phy_generic(hw); 100 101 mac->mcft_size = IXGBE_82598_MC_TBL_SIZE; 102 mac->vft_size = IXGBE_82598_VFT_TBL_SIZE; 103 mac->num_rar_entries = IXGBE_82598_RAR_ENTRIES; 104 mac->rx_pb_size = IXGBE_82598_RX_PB_SIZE; 105 mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES; 106 mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES; 107 mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw); 108 109 return 0; 110 } 111 112 /** 113 * ixgbe_init_phy_ops_82598 - PHY/SFP specific init 114 * @hw: pointer to hardware structure 115 * 116 * Initialize any function pointers that were not able to be 117 * set during get_invariants because the PHY/SFP type was 118 * not known. Perform the SFP init if necessary. 119 * 120 **/ 121 static s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw) 122 { 123 struct ixgbe_mac_info *mac = &hw->mac; 124 struct ixgbe_phy_info *phy = &hw->phy; 125 s32 ret_val; 126 u16 list_offset, data_offset; 127 128 /* Identify the PHY */ 129 phy->ops.identify(hw); 130 131 /* Overwrite the link function pointers if copper PHY */ 132 if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) { 133 mac->ops.setup_link = &ixgbe_setup_copper_link_82598; 134 mac->ops.get_link_capabilities = 135 &ixgbe_get_copper_link_capabilities_generic; 136 } 137 138 switch (hw->phy.type) { 139 case ixgbe_phy_tn: 140 phy->ops.setup_link = &ixgbe_setup_phy_link_tnx; 141 phy->ops.check_link = &ixgbe_check_phy_link_tnx; 142 phy->ops.get_firmware_version = 143 &ixgbe_get_phy_firmware_version_tnx; 144 break; 145 case ixgbe_phy_nl: 146 phy->ops.reset = &ixgbe_reset_phy_nl; 147 148 /* Call SFP+ identify routine to get the SFP+ module type */ 149 ret_val = phy->ops.identify_sfp(hw); 150 if (ret_val) 151 return ret_val; 152 if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) 153 return IXGBE_ERR_SFP_NOT_SUPPORTED; 154 155 /* Check to see if SFP+ module is supported */ 156 ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, 157 &list_offset, 158 &data_offset); 159 if (ret_val) 160 return IXGBE_ERR_SFP_NOT_SUPPORTED; 161 break; 162 default: 163 break; 164 } 165 166 return 0; 167 } 168 169 /** 170 * ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx 171 * @hw: pointer to hardware structure 172 * 173 * Starts the hardware using the generic start_hw function. 174 * Disables relaxed ordering for archs other than SPARC 175 * Then set pcie completion timeout 176 * 177 **/ 178 static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw) 179 { 180 #ifndef CONFIG_SPARC 181 u32 regval; 182 u32 i; 183 #endif 184 s32 ret_val; 185 186 ret_val = ixgbe_start_hw_generic(hw); 187 188 #ifndef CONFIG_SPARC 189 /* Disable relaxed ordering */ 190 for (i = 0; ((i < hw->mac.max_tx_queues) && 191 (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { 192 regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i)); 193 regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN; 194 IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval); 195 } 196 197 for (i = 0; ((i < hw->mac.max_rx_queues) && 198 (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { 199 regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); 200 regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN | 201 IXGBE_DCA_RXCTRL_HEAD_WRO_EN); 202 IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval); 203 } 204 #endif 205 if (ret_val) 206 return ret_val; 207 208 /* set the completion timeout for interface */ 209 ixgbe_set_pcie_completion_timeout(hw); 210 211 return 0; 212 } 213 214 /** 215 * ixgbe_get_link_capabilities_82598 - Determines link capabilities 216 * @hw: pointer to hardware structure 217 * @speed: pointer to link speed 218 * @autoneg: boolean auto-negotiation value 219 * 220 * Determines the link capabilities by reading the AUTOC register. 221 **/ 222 static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw, 223 ixgbe_link_speed *speed, 224 bool *autoneg) 225 { 226 u32 autoc = 0; 227 228 /* 229 * Determine link capabilities based on the stored value of AUTOC, 230 * which represents EEPROM defaults. If AUTOC value has not been 231 * stored, use the current register value. 232 */ 233 if (hw->mac.orig_link_settings_stored) 234 autoc = hw->mac.orig_autoc; 235 else 236 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); 237 238 switch (autoc & IXGBE_AUTOC_LMS_MASK) { 239 case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: 240 *speed = IXGBE_LINK_SPEED_1GB_FULL; 241 *autoneg = false; 242 break; 243 244 case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: 245 *speed = IXGBE_LINK_SPEED_10GB_FULL; 246 *autoneg = false; 247 break; 248 249 case IXGBE_AUTOC_LMS_1G_AN: 250 *speed = IXGBE_LINK_SPEED_1GB_FULL; 251 *autoneg = true; 252 break; 253 254 case IXGBE_AUTOC_LMS_KX4_AN: 255 case IXGBE_AUTOC_LMS_KX4_AN_1G_AN: 256 *speed = IXGBE_LINK_SPEED_UNKNOWN; 257 if (autoc & IXGBE_AUTOC_KX4_SUPP) 258 *speed |= IXGBE_LINK_SPEED_10GB_FULL; 259 if (autoc & IXGBE_AUTOC_KX_SUPP) 260 *speed |= IXGBE_LINK_SPEED_1GB_FULL; 261 *autoneg = true; 262 break; 263 264 default: 265 return IXGBE_ERR_LINK_SETUP; 266 } 267 268 return 0; 269 } 270 271 /** 272 * ixgbe_get_media_type_82598 - Determines media type 273 * @hw: pointer to hardware structure 274 * 275 * Returns the media type (fiber, copper, backplane) 276 **/ 277 static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw) 278 { 279 /* Detect if there is a copper PHY attached. */ 280 switch (hw->phy.type) { 281 case ixgbe_phy_cu_unknown: 282 case ixgbe_phy_tn: 283 return ixgbe_media_type_copper; 284 285 default: 286 break; 287 } 288 289 /* Media type for I82598 is based on device ID */ 290 switch (hw->device_id) { 291 case IXGBE_DEV_ID_82598: 292 case IXGBE_DEV_ID_82598_BX: 293 /* Default device ID is mezzanine card KX/KX4 */ 294 return ixgbe_media_type_backplane; 295 296 case IXGBE_DEV_ID_82598AF_DUAL_PORT: 297 case IXGBE_DEV_ID_82598AF_SINGLE_PORT: 298 case IXGBE_DEV_ID_82598_DA_DUAL_PORT: 299 case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM: 300 case IXGBE_DEV_ID_82598EB_XF_LR: 301 case IXGBE_DEV_ID_82598EB_SFP_LOM: 302 return ixgbe_media_type_fiber; 303 304 case IXGBE_DEV_ID_82598EB_CX4: 305 case IXGBE_DEV_ID_82598_CX4_DUAL_PORT: 306 return ixgbe_media_type_cx4; 307 308 case IXGBE_DEV_ID_82598AT: 309 case IXGBE_DEV_ID_82598AT2: 310 return ixgbe_media_type_copper; 311 312 default: 313 return ixgbe_media_type_unknown; 314 } 315 } 316 317 /** 318 * ixgbe_fc_enable_82598 - Enable flow control 319 * @hw: pointer to hardware structure 320 * 321 * Enable flow control according to the current settings. 322 **/ 323 static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw) 324 { 325 u32 fctrl_reg; 326 u32 rmcs_reg; 327 u32 reg; 328 u32 fcrtl, fcrth; 329 u32 link_speed = 0; 330 int i; 331 bool link_up; 332 333 /* Validate the water mark configuration */ 334 if (!hw->fc.pause_time) 335 return IXGBE_ERR_INVALID_LINK_SETTINGS; 336 337 /* Low water mark of zero causes XOFF floods */ 338 for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { 339 if ((hw->fc.current_mode & ixgbe_fc_tx_pause) && 340 hw->fc.high_water[i]) { 341 if (!hw->fc.low_water[i] || 342 hw->fc.low_water[i] >= hw->fc.high_water[i]) { 343 hw_dbg(hw, "Invalid water mark configuration\n"); 344 return IXGBE_ERR_INVALID_LINK_SETTINGS; 345 } 346 } 347 } 348 349 /* 350 * On 82598 having Rx FC on causes resets while doing 1G 351 * so if it's on turn it off once we know link_speed. For 352 * more details see 82598 Specification update. 353 */ 354 hw->mac.ops.check_link(hw, &link_speed, &link_up, false); 355 if (link_up && link_speed == IXGBE_LINK_SPEED_1GB_FULL) { 356 switch (hw->fc.requested_mode) { 357 case ixgbe_fc_full: 358 hw->fc.requested_mode = ixgbe_fc_tx_pause; 359 break; 360 case ixgbe_fc_rx_pause: 361 hw->fc.requested_mode = ixgbe_fc_none; 362 break; 363 default: 364 /* no change */ 365 break; 366 } 367 } 368 369 /* Negotiate the fc mode to use */ 370 ixgbe_fc_autoneg(hw); 371 372 /* Disable any previous flow control settings */ 373 fctrl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL); 374 fctrl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE); 375 376 rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS); 377 rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X); 378 379 /* 380 * The possible values of fc.current_mode are: 381 * 0: Flow control is completely disabled 382 * 1: Rx flow control is enabled (we can receive pause frames, 383 * but not send pause frames). 384 * 2: Tx flow control is enabled (we can send pause frames but 385 * we do not support receiving pause frames). 386 * 3: Both Rx and Tx flow control (symmetric) are enabled. 387 * other: Invalid. 388 */ 389 switch (hw->fc.current_mode) { 390 case ixgbe_fc_none: 391 /* 392 * Flow control is disabled by software override or autoneg. 393 * The code below will actually disable it in the HW. 394 */ 395 break; 396 case ixgbe_fc_rx_pause: 397 /* 398 * Rx Flow control is enabled and Tx Flow control is 399 * disabled by software override. Since there really 400 * isn't a way to advertise that we are capable of RX 401 * Pause ONLY, we will advertise that we support both 402 * symmetric and asymmetric Rx PAUSE. Later, we will 403 * disable the adapter's ability to send PAUSE frames. 404 */ 405 fctrl_reg |= IXGBE_FCTRL_RFCE; 406 break; 407 case ixgbe_fc_tx_pause: 408 /* 409 * Tx Flow control is enabled, and Rx Flow control is 410 * disabled by software override. 411 */ 412 rmcs_reg |= IXGBE_RMCS_TFCE_802_3X; 413 break; 414 case ixgbe_fc_full: 415 /* Flow control (both Rx and Tx) is enabled by SW override. */ 416 fctrl_reg |= IXGBE_FCTRL_RFCE; 417 rmcs_reg |= IXGBE_RMCS_TFCE_802_3X; 418 break; 419 default: 420 hw_dbg(hw, "Flow control param set incorrectly\n"); 421 return IXGBE_ERR_CONFIG; 422 } 423 424 /* Set 802.3x based flow control settings. */ 425 fctrl_reg |= IXGBE_FCTRL_DPF; 426 IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl_reg); 427 IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg); 428 429 /* Set up and enable Rx high/low water mark thresholds, enable XON. */ 430 for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { 431 if ((hw->fc.current_mode & ixgbe_fc_tx_pause) && 432 hw->fc.high_water[i]) { 433 fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE; 434 fcrth = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN; 435 IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), fcrtl); 436 IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), fcrth); 437 } else { 438 IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), 0); 439 IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), 0); 440 } 441 442 } 443 444 /* Configure pause time (2 TCs per register) */ 445 reg = hw->fc.pause_time * 0x00010001; 446 for (i = 0; i < (MAX_TRAFFIC_CLASS / 2); i++) 447 IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg); 448 449 /* Configure flow control refresh threshold value */ 450 IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2); 451 452 return 0; 453 } 454 455 /** 456 * ixgbe_start_mac_link_82598 - Configures MAC link settings 457 * @hw: pointer to hardware structure 458 * 459 * Configures link settings based on values in the ixgbe_hw struct. 460 * Restarts the link. Performs autonegotiation if needed. 461 **/ 462 static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw, 463 bool autoneg_wait_to_complete) 464 { 465 u32 autoc_reg; 466 u32 links_reg; 467 u32 i; 468 s32 status = 0; 469 470 /* Restart link */ 471 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); 472 autoc_reg |= IXGBE_AUTOC_AN_RESTART; 473 IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); 474 475 /* Only poll for autoneg to complete if specified to do so */ 476 if (autoneg_wait_to_complete) { 477 if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) == 478 IXGBE_AUTOC_LMS_KX4_AN || 479 (autoc_reg & IXGBE_AUTOC_LMS_MASK) == 480 IXGBE_AUTOC_LMS_KX4_AN_1G_AN) { 481 links_reg = 0; /* Just in case Autoneg time = 0 */ 482 for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { 483 links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); 484 if (links_reg & IXGBE_LINKS_KX_AN_COMP) 485 break; 486 msleep(100); 487 } 488 if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { 489 status = IXGBE_ERR_AUTONEG_NOT_COMPLETE; 490 hw_dbg(hw, "Autonegotiation did not complete.\n"); 491 } 492 } 493 } 494 495 /* Add delay to filter out noises during initial link setup */ 496 msleep(50); 497 498 return status; 499 } 500 501 /** 502 * ixgbe_validate_link_ready - Function looks for phy link 503 * @hw: pointer to hardware structure 504 * 505 * Function indicates success when phy link is available. If phy is not ready 506 * within 5 seconds of MAC indicating link, the function returns error. 507 **/ 508 static s32 ixgbe_validate_link_ready(struct ixgbe_hw *hw) 509 { 510 u32 timeout; 511 u16 an_reg; 512 513 if (hw->device_id != IXGBE_DEV_ID_82598AT2) 514 return 0; 515 516 for (timeout = 0; 517 timeout < IXGBE_VALIDATE_LINK_READY_TIMEOUT; timeout++) { 518 hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN, &an_reg); 519 520 if ((an_reg & MDIO_AN_STAT1_COMPLETE) && 521 (an_reg & MDIO_STAT1_LSTATUS)) 522 break; 523 524 msleep(100); 525 } 526 527 if (timeout == IXGBE_VALIDATE_LINK_READY_TIMEOUT) { 528 hw_dbg(hw, "Link was indicated but link is down\n"); 529 return IXGBE_ERR_LINK_SETUP; 530 } 531 532 return 0; 533 } 534 535 /** 536 * ixgbe_check_mac_link_82598 - Get link/speed status 537 * @hw: pointer to hardware structure 538 * @speed: pointer to link speed 539 * @link_up: true is link is up, false otherwise 540 * @link_up_wait_to_complete: bool used to wait for link up or not 541 * 542 * Reads the links register to determine if link is up and the current speed 543 **/ 544 static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, 545 ixgbe_link_speed *speed, bool *link_up, 546 bool link_up_wait_to_complete) 547 { 548 u32 links_reg; 549 u32 i; 550 u16 link_reg, adapt_comp_reg; 551 552 /* 553 * SERDES PHY requires us to read link status from register 0xC79F. 554 * Bit 0 set indicates link is up/ready; clear indicates link down. 555 * 0xC00C is read to check that the XAUI lanes are active. Bit 0 556 * clear indicates active; set indicates inactive. 557 */ 558 if (hw->phy.type == ixgbe_phy_nl) { 559 hw->phy.ops.read_reg(hw, 0xC79F, MDIO_MMD_PMAPMD, &link_reg); 560 hw->phy.ops.read_reg(hw, 0xC79F, MDIO_MMD_PMAPMD, &link_reg); 561 hw->phy.ops.read_reg(hw, 0xC00C, MDIO_MMD_PMAPMD, 562 &adapt_comp_reg); 563 if (link_up_wait_to_complete) { 564 for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { 565 if ((link_reg & 1) && 566 ((adapt_comp_reg & 1) == 0)) { 567 *link_up = true; 568 break; 569 } else { 570 *link_up = false; 571 } 572 msleep(100); 573 hw->phy.ops.read_reg(hw, 0xC79F, 574 MDIO_MMD_PMAPMD, 575 &link_reg); 576 hw->phy.ops.read_reg(hw, 0xC00C, 577 MDIO_MMD_PMAPMD, 578 &adapt_comp_reg); 579 } 580 } else { 581 if ((link_reg & 1) && ((adapt_comp_reg & 1) == 0)) 582 *link_up = true; 583 else 584 *link_up = false; 585 } 586 587 if (!*link_up) 588 return 0; 589 } 590 591 links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); 592 if (link_up_wait_to_complete) { 593 for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { 594 if (links_reg & IXGBE_LINKS_UP) { 595 *link_up = true; 596 break; 597 } else { 598 *link_up = false; 599 } 600 msleep(100); 601 links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); 602 } 603 } else { 604 if (links_reg & IXGBE_LINKS_UP) 605 *link_up = true; 606 else 607 *link_up = false; 608 } 609 610 if (links_reg & IXGBE_LINKS_SPEED) 611 *speed = IXGBE_LINK_SPEED_10GB_FULL; 612 else 613 *speed = IXGBE_LINK_SPEED_1GB_FULL; 614 615 if ((hw->device_id == IXGBE_DEV_ID_82598AT2) && *link_up && 616 (ixgbe_validate_link_ready(hw) != 0)) 617 *link_up = false; 618 619 return 0; 620 } 621 622 /** 623 * ixgbe_setup_mac_link_82598 - Set MAC link speed 624 * @hw: pointer to hardware structure 625 * @speed: new link speed 626 * @autoneg_wait_to_complete: true when waiting for completion is needed 627 * 628 * Set the link speed in the AUTOC register and restarts link. 629 **/ 630 static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw, 631 ixgbe_link_speed speed, 632 bool autoneg_wait_to_complete) 633 { 634 bool autoneg = false; 635 ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; 636 u32 curr_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); 637 u32 autoc = curr_autoc; 638 u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK; 639 640 /* Check to see if speed passed in is supported. */ 641 ixgbe_get_link_capabilities_82598(hw, &link_capabilities, &autoneg); 642 speed &= link_capabilities; 643 644 if (speed == IXGBE_LINK_SPEED_UNKNOWN) 645 return IXGBE_ERR_LINK_SETUP; 646 647 /* Set KX4/KX support according to speed requested */ 648 else if (link_mode == IXGBE_AUTOC_LMS_KX4_AN || 649 link_mode == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) { 650 autoc &= ~IXGBE_AUTOC_KX4_KX_SUPP_MASK; 651 if (speed & IXGBE_LINK_SPEED_10GB_FULL) 652 autoc |= IXGBE_AUTOC_KX4_SUPP; 653 if (speed & IXGBE_LINK_SPEED_1GB_FULL) 654 autoc |= IXGBE_AUTOC_KX_SUPP; 655 if (autoc != curr_autoc) 656 IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); 657 } 658 659 /* Setup and restart the link based on the new values in 660 * ixgbe_hw This will write the AUTOC register based on the new 661 * stored values 662 */ 663 return ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete); 664 } 665 666 667 /** 668 * ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field 669 * @hw: pointer to hardware structure 670 * @speed: new link speed 671 * @autoneg_wait_to_complete: true if waiting is needed to complete 672 * 673 * Sets the link speed in the AUTOC register in the MAC and restarts link. 674 **/ 675 static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, 676 ixgbe_link_speed speed, 677 bool autoneg_wait_to_complete) 678 { 679 s32 status; 680 681 /* Setup the PHY according to input speed */ 682 status = hw->phy.ops.setup_link_speed(hw, speed, 683 autoneg_wait_to_complete); 684 /* Set up MAC */ 685 ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete); 686 687 return status; 688 } 689 690 /** 691 * ixgbe_reset_hw_82598 - Performs hardware reset 692 * @hw: pointer to hardware structure 693 * 694 * Resets the hardware by resetting the transmit and receive units, masks and 695 * clears all interrupts, performing a PHY reset, and performing a link (MAC) 696 * reset. 697 **/ 698 static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw) 699 { 700 s32 status; 701 s32 phy_status = 0; 702 u32 ctrl; 703 u32 gheccr; 704 u32 i; 705 u32 autoc; 706 u8 analog_val; 707 708 /* Call adapter stop to disable tx/rx and clear interrupts */ 709 status = hw->mac.ops.stop_adapter(hw); 710 if (status) 711 return status; 712 713 /* 714 * Power up the Atlas Tx lanes if they are currently powered down. 715 * Atlas Tx lanes are powered down for MAC loopback tests, but 716 * they are not automatically restored on reset. 717 */ 718 hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val); 719 if (analog_val & IXGBE_ATLAS_PDN_TX_REG_EN) { 720 /* Enable Tx Atlas so packets can be transmitted again */ 721 hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, 722 &analog_val); 723 analog_val &= ~IXGBE_ATLAS_PDN_TX_REG_EN; 724 hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, 725 analog_val); 726 727 hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, 728 &analog_val); 729 analog_val &= ~IXGBE_ATLAS_PDN_TX_10G_QL_ALL; 730 hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, 731 analog_val); 732 733 hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, 734 &analog_val); 735 analog_val &= ~IXGBE_ATLAS_PDN_TX_1G_QL_ALL; 736 hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, 737 analog_val); 738 739 hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, 740 &analog_val); 741 analog_val &= ~IXGBE_ATLAS_PDN_TX_AN_QL_ALL; 742 hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, 743 analog_val); 744 } 745 746 /* Reset PHY */ 747 if (hw->phy.reset_disable == false) { 748 /* PHY ops must be identified and initialized prior to reset */ 749 750 /* Init PHY and function pointers, perform SFP setup */ 751 phy_status = hw->phy.ops.init(hw); 752 if (phy_status == IXGBE_ERR_SFP_NOT_SUPPORTED) 753 return phy_status; 754 if (phy_status == IXGBE_ERR_SFP_NOT_PRESENT) 755 goto mac_reset_top; 756 757 hw->phy.ops.reset(hw); 758 } 759 760 mac_reset_top: 761 /* 762 * Issue global reset to the MAC. This needs to be a SW reset. 763 * If link reset is used, it might reset the MAC when mng is using it 764 */ 765 ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL) | IXGBE_CTRL_RST; 766 IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); 767 IXGBE_WRITE_FLUSH(hw); 768 usleep_range(1000, 1200); 769 770 /* Poll for reset bit to self-clear indicating reset is complete */ 771 for (i = 0; i < 10; i++) { 772 ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); 773 if (!(ctrl & IXGBE_CTRL_RST)) 774 break; 775 udelay(1); 776 } 777 if (ctrl & IXGBE_CTRL_RST) { 778 status = IXGBE_ERR_RESET_FAILED; 779 hw_dbg(hw, "Reset polling failed to complete.\n"); 780 } 781 782 msleep(50); 783 784 /* 785 * Double resets are required for recovery from certain error 786 * conditions. Between resets, it is necessary to stall to allow time 787 * for any pending HW events to complete. 788 */ 789 if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { 790 hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; 791 goto mac_reset_top; 792 } 793 794 gheccr = IXGBE_READ_REG(hw, IXGBE_GHECCR); 795 gheccr &= ~(BIT(21) | BIT(18) | BIT(9) | BIT(6)); 796 IXGBE_WRITE_REG(hw, IXGBE_GHECCR, gheccr); 797 798 /* 799 * Store the original AUTOC value if it has not been 800 * stored off yet. Otherwise restore the stored original 801 * AUTOC value since the reset operation sets back to deaults. 802 */ 803 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); 804 if (hw->mac.orig_link_settings_stored == false) { 805 hw->mac.orig_autoc = autoc; 806 hw->mac.orig_link_settings_stored = true; 807 } else if (autoc != hw->mac.orig_autoc) { 808 IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc); 809 } 810 811 /* Store the permanent mac address */ 812 hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); 813 814 /* 815 * Store MAC address from RAR0, clear receive address registers, and 816 * clear the multicast table 817 */ 818 hw->mac.ops.init_rx_addrs(hw); 819 820 if (phy_status) 821 status = phy_status; 822 823 return status; 824 } 825 826 /** 827 * ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address 828 * @hw: pointer to hardware struct 829 * @rar: receive address register index to associate with a VMDq index 830 * @vmdq: VMDq set index 831 **/ 832 static s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) 833 { 834 u32 rar_high; 835 u32 rar_entries = hw->mac.num_rar_entries; 836 837 /* Make sure we are using a valid rar index range */ 838 if (rar >= rar_entries) { 839 hw_dbg(hw, "RAR index %d is out of range.\n", rar); 840 return IXGBE_ERR_INVALID_ARGUMENT; 841 } 842 843 rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar)); 844 rar_high &= ~IXGBE_RAH_VIND_MASK; 845 rar_high |= ((vmdq << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK); 846 IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high); 847 return 0; 848 } 849 850 /** 851 * ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address 852 * @hw: pointer to hardware struct 853 * @rar: receive address register index to associate with a VMDq index 854 * @vmdq: VMDq clear index (not used in 82598, but elsewhere) 855 **/ 856 static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) 857 { 858 u32 rar_high; 859 u32 rar_entries = hw->mac.num_rar_entries; 860 861 862 /* Make sure we are using a valid rar index range */ 863 if (rar >= rar_entries) { 864 hw_dbg(hw, "RAR index %d is out of range.\n", rar); 865 return IXGBE_ERR_INVALID_ARGUMENT; 866 } 867 868 rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar)); 869 if (rar_high & IXGBE_RAH_VIND_MASK) { 870 rar_high &= ~IXGBE_RAH_VIND_MASK; 871 IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high); 872 } 873 874 return 0; 875 } 876 877 /** 878 * ixgbe_set_vfta_82598 - Set VLAN filter table 879 * @hw: pointer to hardware structure 880 * @vlan: VLAN id to write to VLAN filter 881 * @vind: VMDq output index that maps queue to VLAN id in VFTA 882 * @vlan_on: boolean flag to turn on/off VLAN in VFTA 883 * @vlvf_bypass: boolean flag - unused 884 * 885 * Turn on/off specified VLAN in the VLAN filter table. 886 **/ 887 static s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind, 888 bool vlan_on, bool vlvf_bypass) 889 { 890 u32 regindex; 891 u32 bitindex; 892 u32 bits; 893 u32 vftabyte; 894 895 if (vlan > 4095) 896 return IXGBE_ERR_PARAM; 897 898 /* Determine 32-bit word position in array */ 899 regindex = (vlan >> 5) & 0x7F; /* upper seven bits */ 900 901 /* Determine the location of the (VMD) queue index */ 902 vftabyte = ((vlan >> 3) & 0x03); /* bits (4:3) indicating byte array */ 903 bitindex = (vlan & 0x7) << 2; /* lower 3 bits indicate nibble */ 904 905 /* Set the nibble for VMD queue index */ 906 bits = IXGBE_READ_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex)); 907 bits &= (~(0x0F << bitindex)); 908 bits |= (vind << bitindex); 909 IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex), bits); 910 911 /* Determine the location of the bit for this VLAN id */ 912 bitindex = vlan & 0x1F; /* lower five bits */ 913 914 bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex)); 915 if (vlan_on) 916 /* Turn on this VLAN id */ 917 bits |= BIT(bitindex); 918 else 919 /* Turn off this VLAN id */ 920 bits &= ~BIT(bitindex); 921 IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits); 922 923 return 0; 924 } 925 926 /** 927 * ixgbe_clear_vfta_82598 - Clear VLAN filter table 928 * @hw: pointer to hardware structure 929 * 930 * Clears the VLAN filer table, and the VMDq index associated with the filter 931 **/ 932 static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw) 933 { 934 u32 offset; 935 u32 vlanbyte; 936 937 for (offset = 0; offset < hw->mac.vft_size; offset++) 938 IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0); 939 940 for (vlanbyte = 0; vlanbyte < 4; vlanbyte++) 941 for (offset = 0; offset < hw->mac.vft_size; offset++) 942 IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset), 943 0); 944 945 return 0; 946 } 947 948 /** 949 * ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register 950 * @hw: pointer to hardware structure 951 * @reg: analog register to read 952 * @val: read value 953 * 954 * Performs read operation to Atlas analog register specified. 955 **/ 956 static s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val) 957 { 958 u32 atlas_ctl; 959 960 IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, 961 IXGBE_ATLASCTL_WRITE_CMD | (reg << 8)); 962 IXGBE_WRITE_FLUSH(hw); 963 udelay(10); 964 atlas_ctl = IXGBE_READ_REG(hw, IXGBE_ATLASCTL); 965 *val = (u8)atlas_ctl; 966 967 return 0; 968 } 969 970 /** 971 * ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register 972 * @hw: pointer to hardware structure 973 * @reg: atlas register to write 974 * @val: value to write 975 * 976 * Performs write operation to Atlas analog register specified. 977 **/ 978 static s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val) 979 { 980 u32 atlas_ctl; 981 982 atlas_ctl = (reg << 8) | val; 983 IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, atlas_ctl); 984 IXGBE_WRITE_FLUSH(hw); 985 udelay(10); 986 987 return 0; 988 } 989 990 /** 991 * ixgbe_read_i2c_phy_82598 - Reads 8 bit word over I2C interface. 992 * @hw: pointer to hardware structure 993 * @dev_addr: address to read from 994 * @byte_offset: byte offset to read from dev_addr 995 * @eeprom_data: value read 996 * 997 * Performs 8 byte read operation to SFP module's data over I2C interface. 998 **/ 999 static s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr, 1000 u8 byte_offset, u8 *eeprom_data) 1001 { 1002 s32 status = 0; 1003 u16 sfp_addr = 0; 1004 u16 sfp_data = 0; 1005 u16 sfp_stat = 0; 1006 u16 gssr; 1007 u32 i; 1008 1009 if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) 1010 gssr = IXGBE_GSSR_PHY1_SM; 1011 else 1012 gssr = IXGBE_GSSR_PHY0_SM; 1013 1014 if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0) 1015 return IXGBE_ERR_SWFW_SYNC; 1016 1017 if (hw->phy.type == ixgbe_phy_nl) { 1018 /* 1019 * phy SDA/SCL registers are at addresses 0xC30A to 1020 * 0xC30D. These registers are used to talk to the SFP+ 1021 * module's EEPROM through the SDA/SCL (I2C) interface. 1022 */ 1023 sfp_addr = (dev_addr << 8) + byte_offset; 1024 sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK); 1025 hw->phy.ops.write_reg_mdi(hw, 1026 IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR, 1027 MDIO_MMD_PMAPMD, 1028 sfp_addr); 1029 1030 /* Poll status */ 1031 for (i = 0; i < 100; i++) { 1032 hw->phy.ops.read_reg_mdi(hw, 1033 IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT, 1034 MDIO_MMD_PMAPMD, 1035 &sfp_stat); 1036 sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK; 1037 if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS) 1038 break; 1039 usleep_range(10000, 20000); 1040 } 1041 1042 if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_PASS) { 1043 hw_dbg(hw, "EEPROM read did not pass.\n"); 1044 status = IXGBE_ERR_SFP_NOT_PRESENT; 1045 goto out; 1046 } 1047 1048 /* Read data */ 1049 hw->phy.ops.read_reg_mdi(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA, 1050 MDIO_MMD_PMAPMD, &sfp_data); 1051 1052 *eeprom_data = (u8)(sfp_data >> 8); 1053 } else { 1054 status = IXGBE_ERR_PHY; 1055 } 1056 1057 out: 1058 hw->mac.ops.release_swfw_sync(hw, gssr); 1059 return status; 1060 } 1061 1062 /** 1063 * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface. 1064 * @hw: pointer to hardware structure 1065 * @byte_offset: EEPROM byte offset to read 1066 * @eeprom_data: value read 1067 * 1068 * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. 1069 **/ 1070 static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, 1071 u8 *eeprom_data) 1072 { 1073 return ixgbe_read_i2c_phy_82598(hw, IXGBE_I2C_EEPROM_DEV_ADDR, 1074 byte_offset, eeprom_data); 1075 } 1076 1077 /** 1078 * ixgbe_read_i2c_sff8472_82598 - Reads 8 bit word over I2C interface. 1079 * @hw: pointer to hardware structure 1080 * @byte_offset: byte offset at address 0xA2 1081 * @eeprom_data: value read 1082 * 1083 * Performs 8 byte read operation to SFP module's SFF-8472 data over I2C 1084 **/ 1085 static s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset, 1086 u8 *sff8472_data) 1087 { 1088 return ixgbe_read_i2c_phy_82598(hw, IXGBE_I2C_EEPROM_DEV_ADDR2, 1089 byte_offset, sff8472_data); 1090 } 1091 1092 /** 1093 * ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple 1094 * port devices. 1095 * @hw: pointer to the HW structure 1096 * 1097 * Calls common function and corrects issue with some single port devices 1098 * that enable LAN1 but not LAN0. 1099 **/ 1100 static void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw) 1101 { 1102 struct ixgbe_bus_info *bus = &hw->bus; 1103 u16 pci_gen = 0; 1104 u16 pci_ctrl2 = 0; 1105 1106 ixgbe_set_lan_id_multi_port_pcie(hw); 1107 1108 /* check if LAN0 is disabled */ 1109 hw->eeprom.ops.read(hw, IXGBE_PCIE_GENERAL_PTR, &pci_gen); 1110 if ((pci_gen != 0) && (pci_gen != 0xFFFF)) { 1111 1112 hw->eeprom.ops.read(hw, pci_gen + IXGBE_PCIE_CTRL2, &pci_ctrl2); 1113 1114 /* if LAN0 is completely disabled force function to 0 */ 1115 if ((pci_ctrl2 & IXGBE_PCIE_CTRL2_LAN_DISABLE) && 1116 !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DISABLE_SELECT) && 1117 !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DUMMY_ENABLE)) { 1118 1119 bus->func = 0; 1120 } 1121 } 1122 } 1123 1124 /** 1125 * ixgbe_set_rxpba_82598 - Initialize RX packet buffer 1126 * @hw: pointer to hardware structure 1127 * @num_pb: number of packet buffers to allocate 1128 * @headroom: reserve n KB of headroom 1129 * @strategy: packet buffer allocation strategy 1130 **/ 1131 static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb, 1132 u32 headroom, int strategy) 1133 { 1134 u32 rxpktsize = IXGBE_RXPBSIZE_64KB; 1135 u8 i = 0; 1136 1137 if (!num_pb) 1138 return; 1139 1140 /* Setup Rx packet buffer sizes */ 1141 switch (strategy) { 1142 case PBA_STRATEGY_WEIGHTED: 1143 /* Setup the first four at 80KB */ 1144 rxpktsize = IXGBE_RXPBSIZE_80KB; 1145 for (; i < 4; i++) 1146 IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); 1147 /* Setup the last four at 48KB...don't re-init i */ 1148 rxpktsize = IXGBE_RXPBSIZE_48KB; 1149 /* Fall Through */ 1150 case PBA_STRATEGY_EQUAL: 1151 default: 1152 /* Divide the remaining Rx packet buffer evenly among the TCs */ 1153 for (; i < IXGBE_MAX_PACKET_BUFFERS; i++) 1154 IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); 1155 break; 1156 } 1157 1158 /* Setup Tx packet buffer sizes */ 1159 for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++) 1160 IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), IXGBE_TXPBSIZE_40KB); 1161 } 1162 1163 static const struct ixgbe_mac_operations mac_ops_82598 = { 1164 .init_hw = &ixgbe_init_hw_generic, 1165 .reset_hw = &ixgbe_reset_hw_82598, 1166 .start_hw = &ixgbe_start_hw_82598, 1167 .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic, 1168 .get_media_type = &ixgbe_get_media_type_82598, 1169 .enable_rx_dma = &ixgbe_enable_rx_dma_generic, 1170 .get_mac_addr = &ixgbe_get_mac_addr_generic, 1171 .stop_adapter = &ixgbe_stop_adapter_generic, 1172 .get_bus_info = &ixgbe_get_bus_info_generic, 1173 .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie_82598, 1174 .read_analog_reg8 = &ixgbe_read_analog_reg8_82598, 1175 .write_analog_reg8 = &ixgbe_write_analog_reg8_82598, 1176 .setup_link = &ixgbe_setup_mac_link_82598, 1177 .set_rxpba = &ixgbe_set_rxpba_82598, 1178 .check_link = &ixgbe_check_mac_link_82598, 1179 .get_link_capabilities = &ixgbe_get_link_capabilities_82598, 1180 .led_on = &ixgbe_led_on_generic, 1181 .led_off = &ixgbe_led_off_generic, 1182 .blink_led_start = &ixgbe_blink_led_start_generic, 1183 .blink_led_stop = &ixgbe_blink_led_stop_generic, 1184 .set_rar = &ixgbe_set_rar_generic, 1185 .clear_rar = &ixgbe_clear_rar_generic, 1186 .set_vmdq = &ixgbe_set_vmdq_82598, 1187 .clear_vmdq = &ixgbe_clear_vmdq_82598, 1188 .init_rx_addrs = &ixgbe_init_rx_addrs_generic, 1189 .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic, 1190 .enable_mc = &ixgbe_enable_mc_generic, 1191 .disable_mc = &ixgbe_disable_mc_generic, 1192 .clear_vfta = &ixgbe_clear_vfta_82598, 1193 .set_vfta = &ixgbe_set_vfta_82598, 1194 .fc_enable = &ixgbe_fc_enable_82598, 1195 .setup_fc = ixgbe_setup_fc_generic, 1196 .set_fw_drv_ver = NULL, 1197 .acquire_swfw_sync = &ixgbe_acquire_swfw_sync, 1198 .release_swfw_sync = &ixgbe_release_swfw_sync, 1199 .init_swfw_sync = NULL, 1200 .get_thermal_sensor_data = NULL, 1201 .init_thermal_sensor_thresh = NULL, 1202 .prot_autoc_read = &prot_autoc_read_generic, 1203 .prot_autoc_write = &prot_autoc_write_generic, 1204 .enable_rx = &ixgbe_enable_rx_generic, 1205 .disable_rx = &ixgbe_disable_rx_generic, 1206 }; 1207 1208 static const struct ixgbe_eeprom_operations eeprom_ops_82598 = { 1209 .init_params = &ixgbe_init_eeprom_params_generic, 1210 .read = &ixgbe_read_eerd_generic, 1211 .write = &ixgbe_write_eeprom_generic, 1212 .write_buffer = &ixgbe_write_eeprom_buffer_bit_bang_generic, 1213 .read_buffer = &ixgbe_read_eerd_buffer_generic, 1214 .calc_checksum = &ixgbe_calc_eeprom_checksum_generic, 1215 .validate_checksum = &ixgbe_validate_eeprom_checksum_generic, 1216 .update_checksum = &ixgbe_update_eeprom_checksum_generic, 1217 }; 1218 1219 static const struct ixgbe_phy_operations phy_ops_82598 = { 1220 .identify = &ixgbe_identify_phy_generic, 1221 .identify_sfp = &ixgbe_identify_module_generic, 1222 .init = &ixgbe_init_phy_ops_82598, 1223 .reset = &ixgbe_reset_phy_generic, 1224 .read_reg = &ixgbe_read_phy_reg_generic, 1225 .write_reg = &ixgbe_write_phy_reg_generic, 1226 .read_reg_mdi = &ixgbe_read_phy_reg_mdi, 1227 .write_reg_mdi = &ixgbe_write_phy_reg_mdi, 1228 .setup_link = &ixgbe_setup_phy_link_generic, 1229 .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, 1230 .read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_82598, 1231 .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_82598, 1232 .check_overtemp = &ixgbe_tn_check_overtemp, 1233 }; 1234 1235 const struct ixgbe_info ixgbe_82598_info = { 1236 .mac = ixgbe_mac_82598EB, 1237 .get_invariants = &ixgbe_get_invariants_82598, 1238 .mac_ops = &mac_ops_82598, 1239 .eeprom_ops = &eeprom_ops_82598, 1240 .phy_ops = &phy_ops_82598, 1241 .mvals = ixgbe_mvals_8259X, 1242 }; 1243