1 // SPDX-License-Identifier: GPL-2.0 2 /* Copyright(c) 2013 - 2018 Intel Corporation. */ 3 4 #include <linux/prefetch.h> 5 #include <linux/bpf_trace.h> 6 #include <net/xdp.h> 7 #include "i40e.h" 8 #include "i40e_trace.h" 9 #include "i40e_prototype.h" 10 #include "i40e_txrx_common.h" 11 #include "i40e_xsk.h" 12 13 #define I40E_TXD_CMD (I40E_TX_DESC_CMD_EOP | I40E_TX_DESC_CMD_RS) 14 /** 15 * i40e_fdir - Generate a Flow Director descriptor based on fdata 16 * @tx_ring: Tx ring to send buffer on 17 * @fdata: Flow director filter data 18 * @add: Indicate if we are adding a rule or deleting one 19 * 20 **/ 21 static void i40e_fdir(struct i40e_ring *tx_ring, 22 struct i40e_fdir_filter *fdata, bool add) 23 { 24 struct i40e_filter_program_desc *fdir_desc; 25 struct i40e_pf *pf = tx_ring->vsi->back; 26 u32 flex_ptype, dtype_cmd; 27 u16 i; 28 29 /* grab the next descriptor */ 30 i = tx_ring->next_to_use; 31 fdir_desc = I40E_TX_FDIRDESC(tx_ring, i); 32 33 i++; 34 tx_ring->next_to_use = (i < tx_ring->count) ? i : 0; 35 36 flex_ptype = I40E_TXD_FLTR_QW0_QINDEX_MASK & 37 (fdata->q_index << I40E_TXD_FLTR_QW0_QINDEX_SHIFT); 38 39 flex_ptype |= I40E_TXD_FLTR_QW0_FLEXOFF_MASK & 40 (fdata->flex_off << I40E_TXD_FLTR_QW0_FLEXOFF_SHIFT); 41 42 flex_ptype |= I40E_TXD_FLTR_QW0_PCTYPE_MASK & 43 (fdata->pctype << I40E_TXD_FLTR_QW0_PCTYPE_SHIFT); 44 45 flex_ptype |= I40E_TXD_FLTR_QW0_PCTYPE_MASK & 46 (fdata->flex_offset << I40E_TXD_FLTR_QW0_FLEXOFF_SHIFT); 47 48 /* Use LAN VSI Id if not programmed by user */ 49 flex_ptype |= I40E_TXD_FLTR_QW0_DEST_VSI_MASK & 50 ((u32)(fdata->dest_vsi ? : pf->vsi[pf->lan_vsi]->id) << 51 I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT); 52 53 dtype_cmd = I40E_TX_DESC_DTYPE_FILTER_PROG; 54 55 dtype_cmd |= add ? 56 I40E_FILTER_PROGRAM_DESC_PCMD_ADD_UPDATE << 57 I40E_TXD_FLTR_QW1_PCMD_SHIFT : 58 I40E_FILTER_PROGRAM_DESC_PCMD_REMOVE << 59 I40E_TXD_FLTR_QW1_PCMD_SHIFT; 60 61 dtype_cmd |= I40E_TXD_FLTR_QW1_DEST_MASK & 62 (fdata->dest_ctl << I40E_TXD_FLTR_QW1_DEST_SHIFT); 63 64 dtype_cmd |= I40E_TXD_FLTR_QW1_FD_STATUS_MASK & 65 (fdata->fd_status << I40E_TXD_FLTR_QW1_FD_STATUS_SHIFT); 66 67 if (fdata->cnt_index) { 68 dtype_cmd |= I40E_TXD_FLTR_QW1_CNT_ENA_MASK; 69 dtype_cmd |= I40E_TXD_FLTR_QW1_CNTINDEX_MASK & 70 ((u32)fdata->cnt_index << 71 I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT); 72 } 73 74 fdir_desc->qindex_flex_ptype_vsi = cpu_to_le32(flex_ptype); 75 fdir_desc->rsvd = cpu_to_le32(0); 76 fdir_desc->dtype_cmd_cntindex = cpu_to_le32(dtype_cmd); 77 fdir_desc->fd_id = cpu_to_le32(fdata->fd_id); 78 } 79 80 #define I40E_FD_CLEAN_DELAY 10 81 /** 82 * i40e_program_fdir_filter - Program a Flow Director filter 83 * @fdir_data: Packet data that will be filter parameters 84 * @raw_packet: the pre-allocated packet buffer for FDir 85 * @pf: The PF pointer 86 * @add: True for add/update, False for remove 87 **/ 88 static int i40e_program_fdir_filter(struct i40e_fdir_filter *fdir_data, 89 u8 *raw_packet, struct i40e_pf *pf, 90 bool add) 91 { 92 struct i40e_tx_buffer *tx_buf, *first; 93 struct i40e_tx_desc *tx_desc; 94 struct i40e_ring *tx_ring; 95 struct i40e_vsi *vsi; 96 struct device *dev; 97 dma_addr_t dma; 98 u32 td_cmd = 0; 99 u16 i; 100 101 /* find existing FDIR VSI */ 102 vsi = i40e_find_vsi_by_type(pf, I40E_VSI_FDIR); 103 if (!vsi) 104 return -ENOENT; 105 106 tx_ring = vsi->tx_rings[0]; 107 dev = tx_ring->dev; 108 109 /* we need two descriptors to add/del a filter and we can wait */ 110 for (i = I40E_FD_CLEAN_DELAY; I40E_DESC_UNUSED(tx_ring) < 2; i--) { 111 if (!i) 112 return -EAGAIN; 113 msleep_interruptible(1); 114 } 115 116 dma = dma_map_single(dev, raw_packet, 117 I40E_FDIR_MAX_RAW_PACKET_SIZE, DMA_TO_DEVICE); 118 if (dma_mapping_error(dev, dma)) 119 goto dma_fail; 120 121 /* grab the next descriptor */ 122 i = tx_ring->next_to_use; 123 first = &tx_ring->tx_bi[i]; 124 i40e_fdir(tx_ring, fdir_data, add); 125 126 /* Now program a dummy descriptor */ 127 i = tx_ring->next_to_use; 128 tx_desc = I40E_TX_DESC(tx_ring, i); 129 tx_buf = &tx_ring->tx_bi[i]; 130 131 tx_ring->next_to_use = ((i + 1) < tx_ring->count) ? i + 1 : 0; 132 133 memset(tx_buf, 0, sizeof(struct i40e_tx_buffer)); 134 135 /* record length, and DMA address */ 136 dma_unmap_len_set(tx_buf, len, I40E_FDIR_MAX_RAW_PACKET_SIZE); 137 dma_unmap_addr_set(tx_buf, dma, dma); 138 139 tx_desc->buffer_addr = cpu_to_le64(dma); 140 td_cmd = I40E_TXD_CMD | I40E_TX_DESC_CMD_DUMMY; 141 142 tx_buf->tx_flags = I40E_TX_FLAGS_FD_SB; 143 tx_buf->raw_buf = (void *)raw_packet; 144 145 tx_desc->cmd_type_offset_bsz = 146 build_ctob(td_cmd, 0, I40E_FDIR_MAX_RAW_PACKET_SIZE, 0); 147 148 /* Force memory writes to complete before letting h/w 149 * know there are new descriptors to fetch. 150 */ 151 wmb(); 152 153 /* Mark the data descriptor to be watched */ 154 first->next_to_watch = tx_desc; 155 156 writel(tx_ring->next_to_use, tx_ring->tail); 157 return 0; 158 159 dma_fail: 160 return -1; 161 } 162 163 #define IP_HEADER_OFFSET 14 164 #define I40E_UDPIP_DUMMY_PACKET_LEN 42 165 /** 166 * i40e_add_del_fdir_udpv4 - Add/Remove UDPv4 filters 167 * @vsi: pointer to the targeted VSI 168 * @fd_data: the flow director data required for the FDir descriptor 169 * @add: true adds a filter, false removes it 170 * 171 * Returns 0 if the filters were successfully added or removed 172 **/ 173 static int i40e_add_del_fdir_udpv4(struct i40e_vsi *vsi, 174 struct i40e_fdir_filter *fd_data, 175 bool add) 176 { 177 struct i40e_pf *pf = vsi->back; 178 struct udphdr *udp; 179 struct iphdr *ip; 180 u8 *raw_packet; 181 int ret; 182 static char packet[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x08, 0, 183 0x45, 0, 0, 0x1c, 0, 0, 0x40, 0, 0x40, 0x11, 0, 0, 0, 0, 0, 0, 184 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; 185 186 raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL); 187 if (!raw_packet) 188 return -ENOMEM; 189 memcpy(raw_packet, packet, I40E_UDPIP_DUMMY_PACKET_LEN); 190 191 ip = (struct iphdr *)(raw_packet + IP_HEADER_OFFSET); 192 udp = (struct udphdr *)(raw_packet + IP_HEADER_OFFSET 193 + sizeof(struct iphdr)); 194 195 ip->daddr = fd_data->dst_ip; 196 udp->dest = fd_data->dst_port; 197 ip->saddr = fd_data->src_ip; 198 udp->source = fd_data->src_port; 199 200 if (fd_data->flex_filter) { 201 u8 *payload = raw_packet + I40E_UDPIP_DUMMY_PACKET_LEN; 202 __be16 pattern = fd_data->flex_word; 203 u16 off = fd_data->flex_offset; 204 205 *((__force __be16 *)(payload + off)) = pattern; 206 } 207 208 fd_data->pctype = I40E_FILTER_PCTYPE_NONF_IPV4_UDP; 209 ret = i40e_program_fdir_filter(fd_data, raw_packet, pf, add); 210 if (ret) { 211 dev_info(&pf->pdev->dev, 212 "PCTYPE:%d, Filter command send failed for fd_id:%d (ret = %d)\n", 213 fd_data->pctype, fd_data->fd_id, ret); 214 /* Free the packet buffer since it wasn't added to the ring */ 215 kfree(raw_packet); 216 return -EOPNOTSUPP; 217 } else if (I40E_DEBUG_FD & pf->hw.debug_mask) { 218 if (add) 219 dev_info(&pf->pdev->dev, 220 "Filter OK for PCTYPE %d loc = %d\n", 221 fd_data->pctype, fd_data->fd_id); 222 else 223 dev_info(&pf->pdev->dev, 224 "Filter deleted for PCTYPE %d loc = %d\n", 225 fd_data->pctype, fd_data->fd_id); 226 } 227 228 if (add) 229 pf->fd_udp4_filter_cnt++; 230 else 231 pf->fd_udp4_filter_cnt--; 232 233 return 0; 234 } 235 236 #define I40E_TCPIP_DUMMY_PACKET_LEN 54 237 /** 238 * i40e_add_del_fdir_tcpv4 - Add/Remove TCPv4 filters 239 * @vsi: pointer to the targeted VSI 240 * @fd_data: the flow director data required for the FDir descriptor 241 * @add: true adds a filter, false removes it 242 * 243 * Returns 0 if the filters were successfully added or removed 244 **/ 245 static int i40e_add_del_fdir_tcpv4(struct i40e_vsi *vsi, 246 struct i40e_fdir_filter *fd_data, 247 bool add) 248 { 249 struct i40e_pf *pf = vsi->back; 250 struct tcphdr *tcp; 251 struct iphdr *ip; 252 u8 *raw_packet; 253 int ret; 254 /* Dummy packet */ 255 static char packet[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x08, 0, 256 0x45, 0, 0, 0x28, 0, 0, 0x40, 0, 0x40, 0x6, 0, 0, 0, 0, 0, 0, 257 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x80, 0x11, 258 0x0, 0x72, 0, 0, 0, 0}; 259 260 raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL); 261 if (!raw_packet) 262 return -ENOMEM; 263 memcpy(raw_packet, packet, I40E_TCPIP_DUMMY_PACKET_LEN); 264 265 ip = (struct iphdr *)(raw_packet + IP_HEADER_OFFSET); 266 tcp = (struct tcphdr *)(raw_packet + IP_HEADER_OFFSET 267 + sizeof(struct iphdr)); 268 269 ip->daddr = fd_data->dst_ip; 270 tcp->dest = fd_data->dst_port; 271 ip->saddr = fd_data->src_ip; 272 tcp->source = fd_data->src_port; 273 274 if (fd_data->flex_filter) { 275 u8 *payload = raw_packet + I40E_TCPIP_DUMMY_PACKET_LEN; 276 __be16 pattern = fd_data->flex_word; 277 u16 off = fd_data->flex_offset; 278 279 *((__force __be16 *)(payload + off)) = pattern; 280 } 281 282 fd_data->pctype = I40E_FILTER_PCTYPE_NONF_IPV4_TCP; 283 ret = i40e_program_fdir_filter(fd_data, raw_packet, pf, add); 284 if (ret) { 285 dev_info(&pf->pdev->dev, 286 "PCTYPE:%d, Filter command send failed for fd_id:%d (ret = %d)\n", 287 fd_data->pctype, fd_data->fd_id, ret); 288 /* Free the packet buffer since it wasn't added to the ring */ 289 kfree(raw_packet); 290 return -EOPNOTSUPP; 291 } else if (I40E_DEBUG_FD & pf->hw.debug_mask) { 292 if (add) 293 dev_info(&pf->pdev->dev, "Filter OK for PCTYPE %d loc = %d)\n", 294 fd_data->pctype, fd_data->fd_id); 295 else 296 dev_info(&pf->pdev->dev, 297 "Filter deleted for PCTYPE %d loc = %d\n", 298 fd_data->pctype, fd_data->fd_id); 299 } 300 301 if (add) { 302 pf->fd_tcp4_filter_cnt++; 303 if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) && 304 I40E_DEBUG_FD & pf->hw.debug_mask) 305 dev_info(&pf->pdev->dev, "Forcing ATR off, sideband rules for TCP/IPv4 flow being applied\n"); 306 set_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state); 307 } else { 308 pf->fd_tcp4_filter_cnt--; 309 } 310 311 return 0; 312 } 313 314 #define I40E_SCTPIP_DUMMY_PACKET_LEN 46 315 /** 316 * i40e_add_del_fdir_sctpv4 - Add/Remove SCTPv4 Flow Director filters for 317 * a specific flow spec 318 * @vsi: pointer to the targeted VSI 319 * @fd_data: the flow director data required for the FDir descriptor 320 * @add: true adds a filter, false removes it 321 * 322 * Returns 0 if the filters were successfully added or removed 323 **/ 324 static int i40e_add_del_fdir_sctpv4(struct i40e_vsi *vsi, 325 struct i40e_fdir_filter *fd_data, 326 bool add) 327 { 328 struct i40e_pf *pf = vsi->back; 329 struct sctphdr *sctp; 330 struct iphdr *ip; 331 u8 *raw_packet; 332 int ret; 333 /* Dummy packet */ 334 static char packet[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x08, 0, 335 0x45, 0, 0, 0x20, 0, 0, 0x40, 0, 0x40, 0x84, 0, 0, 0, 0, 0, 0, 336 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; 337 338 raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL); 339 if (!raw_packet) 340 return -ENOMEM; 341 memcpy(raw_packet, packet, I40E_SCTPIP_DUMMY_PACKET_LEN); 342 343 ip = (struct iphdr *)(raw_packet + IP_HEADER_OFFSET); 344 sctp = (struct sctphdr *)(raw_packet + IP_HEADER_OFFSET 345 + sizeof(struct iphdr)); 346 347 ip->daddr = fd_data->dst_ip; 348 sctp->dest = fd_data->dst_port; 349 ip->saddr = fd_data->src_ip; 350 sctp->source = fd_data->src_port; 351 352 if (fd_data->flex_filter) { 353 u8 *payload = raw_packet + I40E_SCTPIP_DUMMY_PACKET_LEN; 354 __be16 pattern = fd_data->flex_word; 355 u16 off = fd_data->flex_offset; 356 357 *((__force __be16 *)(payload + off)) = pattern; 358 } 359 360 fd_data->pctype = I40E_FILTER_PCTYPE_NONF_IPV4_SCTP; 361 ret = i40e_program_fdir_filter(fd_data, raw_packet, pf, add); 362 if (ret) { 363 dev_info(&pf->pdev->dev, 364 "PCTYPE:%d, Filter command send failed for fd_id:%d (ret = %d)\n", 365 fd_data->pctype, fd_data->fd_id, ret); 366 /* Free the packet buffer since it wasn't added to the ring */ 367 kfree(raw_packet); 368 return -EOPNOTSUPP; 369 } else if (I40E_DEBUG_FD & pf->hw.debug_mask) { 370 if (add) 371 dev_info(&pf->pdev->dev, 372 "Filter OK for PCTYPE %d loc = %d\n", 373 fd_data->pctype, fd_data->fd_id); 374 else 375 dev_info(&pf->pdev->dev, 376 "Filter deleted for PCTYPE %d loc = %d\n", 377 fd_data->pctype, fd_data->fd_id); 378 } 379 380 if (add) 381 pf->fd_sctp4_filter_cnt++; 382 else 383 pf->fd_sctp4_filter_cnt--; 384 385 return 0; 386 } 387 388 #define I40E_IP_DUMMY_PACKET_LEN 34 389 /** 390 * i40e_add_del_fdir_ipv4 - Add/Remove IPv4 Flow Director filters for 391 * a specific flow spec 392 * @vsi: pointer to the targeted VSI 393 * @fd_data: the flow director data required for the FDir descriptor 394 * @add: true adds a filter, false removes it 395 * 396 * Returns 0 if the filters were successfully added or removed 397 **/ 398 static int i40e_add_del_fdir_ipv4(struct i40e_vsi *vsi, 399 struct i40e_fdir_filter *fd_data, 400 bool add) 401 { 402 struct i40e_pf *pf = vsi->back; 403 struct iphdr *ip; 404 u8 *raw_packet; 405 int ret; 406 int i; 407 static char packet[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x08, 0, 408 0x45, 0, 0, 0x14, 0, 0, 0x40, 0, 0x40, 0x10, 0, 0, 0, 0, 0, 0, 409 0, 0, 0, 0}; 410 411 for (i = I40E_FILTER_PCTYPE_NONF_IPV4_OTHER; 412 i <= I40E_FILTER_PCTYPE_FRAG_IPV4; i++) { 413 raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL); 414 if (!raw_packet) 415 return -ENOMEM; 416 memcpy(raw_packet, packet, I40E_IP_DUMMY_PACKET_LEN); 417 ip = (struct iphdr *)(raw_packet + IP_HEADER_OFFSET); 418 419 ip->saddr = fd_data->src_ip; 420 ip->daddr = fd_data->dst_ip; 421 ip->protocol = 0; 422 423 if (fd_data->flex_filter) { 424 u8 *payload = raw_packet + I40E_IP_DUMMY_PACKET_LEN; 425 __be16 pattern = fd_data->flex_word; 426 u16 off = fd_data->flex_offset; 427 428 *((__force __be16 *)(payload + off)) = pattern; 429 } 430 431 fd_data->pctype = i; 432 ret = i40e_program_fdir_filter(fd_data, raw_packet, pf, add); 433 if (ret) { 434 dev_info(&pf->pdev->dev, 435 "PCTYPE:%d, Filter command send failed for fd_id:%d (ret = %d)\n", 436 fd_data->pctype, fd_data->fd_id, ret); 437 /* The packet buffer wasn't added to the ring so we 438 * need to free it now. 439 */ 440 kfree(raw_packet); 441 return -EOPNOTSUPP; 442 } else if (I40E_DEBUG_FD & pf->hw.debug_mask) { 443 if (add) 444 dev_info(&pf->pdev->dev, 445 "Filter OK for PCTYPE %d loc = %d\n", 446 fd_data->pctype, fd_data->fd_id); 447 else 448 dev_info(&pf->pdev->dev, 449 "Filter deleted for PCTYPE %d loc = %d\n", 450 fd_data->pctype, fd_data->fd_id); 451 } 452 } 453 454 if (add) 455 pf->fd_ip4_filter_cnt++; 456 else 457 pf->fd_ip4_filter_cnt--; 458 459 return 0; 460 } 461 462 /** 463 * i40e_add_del_fdir - Build raw packets to add/del fdir filter 464 * @vsi: pointer to the targeted VSI 465 * @input: filter to add or delete 466 * @add: true adds a filter, false removes it 467 * 468 **/ 469 int i40e_add_del_fdir(struct i40e_vsi *vsi, 470 struct i40e_fdir_filter *input, bool add) 471 { 472 struct i40e_pf *pf = vsi->back; 473 int ret; 474 475 switch (input->flow_type & ~FLOW_EXT) { 476 case TCP_V4_FLOW: 477 ret = i40e_add_del_fdir_tcpv4(vsi, input, add); 478 break; 479 case UDP_V4_FLOW: 480 ret = i40e_add_del_fdir_udpv4(vsi, input, add); 481 break; 482 case SCTP_V4_FLOW: 483 ret = i40e_add_del_fdir_sctpv4(vsi, input, add); 484 break; 485 case IP_USER_FLOW: 486 switch (input->ip4_proto) { 487 case IPPROTO_TCP: 488 ret = i40e_add_del_fdir_tcpv4(vsi, input, add); 489 break; 490 case IPPROTO_UDP: 491 ret = i40e_add_del_fdir_udpv4(vsi, input, add); 492 break; 493 case IPPROTO_SCTP: 494 ret = i40e_add_del_fdir_sctpv4(vsi, input, add); 495 break; 496 case IPPROTO_IP: 497 ret = i40e_add_del_fdir_ipv4(vsi, input, add); 498 break; 499 default: 500 /* We cannot support masking based on protocol */ 501 dev_info(&pf->pdev->dev, "Unsupported IPv4 protocol 0x%02x\n", 502 input->ip4_proto); 503 return -EINVAL; 504 } 505 break; 506 default: 507 dev_info(&pf->pdev->dev, "Unsupported flow type 0x%02x\n", 508 input->flow_type); 509 return -EINVAL; 510 } 511 512 /* The buffer allocated here will be normally be freed by 513 * i40e_clean_fdir_tx_irq() as it reclaims resources after transmit 514 * completion. In the event of an error adding the buffer to the FDIR 515 * ring, it will immediately be freed. It may also be freed by 516 * i40e_clean_tx_ring() when closing the VSI. 517 */ 518 return ret; 519 } 520 521 /** 522 * i40e_fd_handle_status - check the Programming Status for FD 523 * @rx_ring: the Rx ring for this descriptor 524 * @rx_desc: the Rx descriptor for programming Status, not a packet descriptor. 525 * @prog_id: the id originally used for programming 526 * 527 * This is used to verify if the FD programming or invalidation 528 * requested by SW to the HW is successful or not and take actions accordingly. 529 **/ 530 void i40e_fd_handle_status(struct i40e_ring *rx_ring, 531 union i40e_rx_desc *rx_desc, u8 prog_id) 532 { 533 struct i40e_pf *pf = rx_ring->vsi->back; 534 struct pci_dev *pdev = pf->pdev; 535 u32 fcnt_prog, fcnt_avail; 536 u32 error; 537 u64 qw; 538 539 qw = le64_to_cpu(rx_desc->wb.qword1.status_error_len); 540 error = (qw & I40E_RX_PROG_STATUS_DESC_QW1_ERROR_MASK) >> 541 I40E_RX_PROG_STATUS_DESC_QW1_ERROR_SHIFT; 542 543 if (error == BIT(I40E_RX_PROG_STATUS_DESC_FD_TBL_FULL_SHIFT)) { 544 pf->fd_inv = le32_to_cpu(rx_desc->wb.qword0.hi_dword.fd_id); 545 if ((rx_desc->wb.qword0.hi_dword.fd_id != 0) || 546 (I40E_DEBUG_FD & pf->hw.debug_mask)) 547 dev_warn(&pdev->dev, "ntuple filter loc = %d, could not be added\n", 548 pf->fd_inv); 549 550 /* Check if the programming error is for ATR. 551 * If so, auto disable ATR and set a state for 552 * flush in progress. Next time we come here if flush is in 553 * progress do nothing, once flush is complete the state will 554 * be cleared. 555 */ 556 if (test_bit(__I40E_FD_FLUSH_REQUESTED, pf->state)) 557 return; 558 559 pf->fd_add_err++; 560 /* store the current atr filter count */ 561 pf->fd_atr_cnt = i40e_get_current_atr_cnt(pf); 562 563 if ((rx_desc->wb.qword0.hi_dword.fd_id == 0) && 564 test_bit(__I40E_FD_SB_AUTO_DISABLED, pf->state)) { 565 /* These set_bit() calls aren't atomic with the 566 * test_bit() here, but worse case we potentially 567 * disable ATR and queue a flush right after SB 568 * support is re-enabled. That shouldn't cause an 569 * issue in practice 570 */ 571 set_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state); 572 set_bit(__I40E_FD_FLUSH_REQUESTED, pf->state); 573 } 574 575 /* filter programming failed most likely due to table full */ 576 fcnt_prog = i40e_get_global_fd_count(pf); 577 fcnt_avail = pf->fdir_pf_filter_count; 578 /* If ATR is running fcnt_prog can quickly change, 579 * if we are very close to full, it makes sense to disable 580 * FD ATR/SB and then re-enable it when there is room. 581 */ 582 if (fcnt_prog >= (fcnt_avail - I40E_FDIR_BUFFER_FULL_MARGIN)) { 583 if ((pf->flags & I40E_FLAG_FD_SB_ENABLED) && 584 !test_and_set_bit(__I40E_FD_SB_AUTO_DISABLED, 585 pf->state)) 586 if (I40E_DEBUG_FD & pf->hw.debug_mask) 587 dev_warn(&pdev->dev, "FD filter space full, new ntuple rules will not be added\n"); 588 } 589 } else if (error == BIT(I40E_RX_PROG_STATUS_DESC_NO_FD_ENTRY_SHIFT)) { 590 if (I40E_DEBUG_FD & pf->hw.debug_mask) 591 dev_info(&pdev->dev, "ntuple filter fd_id = %d, could not be removed\n", 592 rx_desc->wb.qword0.hi_dword.fd_id); 593 } 594 } 595 596 /** 597 * i40e_unmap_and_free_tx_resource - Release a Tx buffer 598 * @ring: the ring that owns the buffer 599 * @tx_buffer: the buffer to free 600 **/ 601 static void i40e_unmap_and_free_tx_resource(struct i40e_ring *ring, 602 struct i40e_tx_buffer *tx_buffer) 603 { 604 if (tx_buffer->skb) { 605 if (tx_buffer->tx_flags & I40E_TX_FLAGS_FD_SB) 606 kfree(tx_buffer->raw_buf); 607 else if (ring_is_xdp(ring)) 608 xdp_return_frame(tx_buffer->xdpf); 609 else 610 dev_kfree_skb_any(tx_buffer->skb); 611 if (dma_unmap_len(tx_buffer, len)) 612 dma_unmap_single(ring->dev, 613 dma_unmap_addr(tx_buffer, dma), 614 dma_unmap_len(tx_buffer, len), 615 DMA_TO_DEVICE); 616 } else if (dma_unmap_len(tx_buffer, len)) { 617 dma_unmap_page(ring->dev, 618 dma_unmap_addr(tx_buffer, dma), 619 dma_unmap_len(tx_buffer, len), 620 DMA_TO_DEVICE); 621 } 622 623 tx_buffer->next_to_watch = NULL; 624 tx_buffer->skb = NULL; 625 dma_unmap_len_set(tx_buffer, len, 0); 626 /* tx_buffer must be completely set up in the transmit path */ 627 } 628 629 /** 630 * i40e_clean_tx_ring - Free any empty Tx buffers 631 * @tx_ring: ring to be cleaned 632 **/ 633 void i40e_clean_tx_ring(struct i40e_ring *tx_ring) 634 { 635 unsigned long bi_size; 636 u16 i; 637 638 if (ring_is_xdp(tx_ring) && tx_ring->xsk_umem) { 639 i40e_xsk_clean_tx_ring(tx_ring); 640 } else { 641 /* ring already cleared, nothing to do */ 642 if (!tx_ring->tx_bi) 643 return; 644 645 /* Free all the Tx ring sk_buffs */ 646 for (i = 0; i < tx_ring->count; i++) 647 i40e_unmap_and_free_tx_resource(tx_ring, 648 &tx_ring->tx_bi[i]); 649 } 650 651 bi_size = sizeof(struct i40e_tx_buffer) * tx_ring->count; 652 memset(tx_ring->tx_bi, 0, bi_size); 653 654 /* Zero out the descriptor ring */ 655 memset(tx_ring->desc, 0, tx_ring->size); 656 657 tx_ring->next_to_use = 0; 658 tx_ring->next_to_clean = 0; 659 660 if (!tx_ring->netdev) 661 return; 662 663 /* cleanup Tx queue statistics */ 664 netdev_tx_reset_queue(txring_txq(tx_ring)); 665 } 666 667 /** 668 * i40e_free_tx_resources - Free Tx resources per queue 669 * @tx_ring: Tx descriptor ring for a specific queue 670 * 671 * Free all transmit software resources 672 **/ 673 void i40e_free_tx_resources(struct i40e_ring *tx_ring) 674 { 675 i40e_clean_tx_ring(tx_ring); 676 kfree(tx_ring->tx_bi); 677 tx_ring->tx_bi = NULL; 678 679 if (tx_ring->desc) { 680 dma_free_coherent(tx_ring->dev, tx_ring->size, 681 tx_ring->desc, tx_ring->dma); 682 tx_ring->desc = NULL; 683 } 684 } 685 686 /** 687 * i40e_get_tx_pending - how many tx descriptors not processed 688 * @ring: the ring of descriptors 689 * @in_sw: use SW variables 690 * 691 * Since there is no access to the ring head register 692 * in XL710, we need to use our local copies 693 **/ 694 u32 i40e_get_tx_pending(struct i40e_ring *ring, bool in_sw) 695 { 696 u32 head, tail; 697 698 if (!in_sw) { 699 head = i40e_get_head(ring); 700 tail = readl(ring->tail); 701 } else { 702 head = ring->next_to_clean; 703 tail = ring->next_to_use; 704 } 705 706 if (head != tail) 707 return (head < tail) ? 708 tail - head : (tail + ring->count - head); 709 710 return 0; 711 } 712 713 /** 714 * i40e_detect_recover_hung - Function to detect and recover hung_queues 715 * @vsi: pointer to vsi struct with tx queues 716 * 717 * VSI has netdev and netdev has TX queues. This function is to check each of 718 * those TX queues if they are hung, trigger recovery by issuing SW interrupt. 719 **/ 720 void i40e_detect_recover_hung(struct i40e_vsi *vsi) 721 { 722 struct i40e_ring *tx_ring = NULL; 723 struct net_device *netdev; 724 unsigned int i; 725 int packets; 726 727 if (!vsi) 728 return; 729 730 if (test_bit(__I40E_VSI_DOWN, vsi->state)) 731 return; 732 733 netdev = vsi->netdev; 734 if (!netdev) 735 return; 736 737 if (!netif_carrier_ok(netdev)) 738 return; 739 740 for (i = 0; i < vsi->num_queue_pairs; i++) { 741 tx_ring = vsi->tx_rings[i]; 742 if (tx_ring && tx_ring->desc) { 743 /* If packet counter has not changed the queue is 744 * likely stalled, so force an interrupt for this 745 * queue. 746 * 747 * prev_pkt_ctr would be negative if there was no 748 * pending work. 749 */ 750 packets = tx_ring->stats.packets & INT_MAX; 751 if (tx_ring->tx_stats.prev_pkt_ctr == packets) { 752 i40e_force_wb(vsi, tx_ring->q_vector); 753 continue; 754 } 755 756 /* Memory barrier between read of packet count and call 757 * to i40e_get_tx_pending() 758 */ 759 smp_rmb(); 760 tx_ring->tx_stats.prev_pkt_ctr = 761 i40e_get_tx_pending(tx_ring, true) ? packets : -1; 762 } 763 } 764 } 765 766 /** 767 * i40e_clean_tx_irq - Reclaim resources after transmit completes 768 * @vsi: the VSI we care about 769 * @tx_ring: Tx ring to clean 770 * @napi_budget: Used to determine if we are in netpoll 771 * 772 * Returns true if there's any budget left (e.g. the clean is finished) 773 **/ 774 static bool i40e_clean_tx_irq(struct i40e_vsi *vsi, 775 struct i40e_ring *tx_ring, int napi_budget) 776 { 777 int i = tx_ring->next_to_clean; 778 struct i40e_tx_buffer *tx_buf; 779 struct i40e_tx_desc *tx_head; 780 struct i40e_tx_desc *tx_desc; 781 unsigned int total_bytes = 0, total_packets = 0; 782 unsigned int budget = vsi->work_limit; 783 784 tx_buf = &tx_ring->tx_bi[i]; 785 tx_desc = I40E_TX_DESC(tx_ring, i); 786 i -= tx_ring->count; 787 788 tx_head = I40E_TX_DESC(tx_ring, i40e_get_head(tx_ring)); 789 790 do { 791 struct i40e_tx_desc *eop_desc = tx_buf->next_to_watch; 792 793 /* if next_to_watch is not set then there is no work pending */ 794 if (!eop_desc) 795 break; 796 797 /* prevent any other reads prior to eop_desc */ 798 smp_rmb(); 799 800 i40e_trace(clean_tx_irq, tx_ring, tx_desc, tx_buf); 801 /* we have caught up to head, no work left to do */ 802 if (tx_head == tx_desc) 803 break; 804 805 /* clear next_to_watch to prevent false hangs */ 806 tx_buf->next_to_watch = NULL; 807 808 /* update the statistics for this packet */ 809 total_bytes += tx_buf->bytecount; 810 total_packets += tx_buf->gso_segs; 811 812 /* free the skb/XDP data */ 813 if (ring_is_xdp(tx_ring)) 814 xdp_return_frame(tx_buf->xdpf); 815 else 816 napi_consume_skb(tx_buf->skb, napi_budget); 817 818 /* unmap skb header data */ 819 dma_unmap_single(tx_ring->dev, 820 dma_unmap_addr(tx_buf, dma), 821 dma_unmap_len(tx_buf, len), 822 DMA_TO_DEVICE); 823 824 /* clear tx_buffer data */ 825 tx_buf->skb = NULL; 826 dma_unmap_len_set(tx_buf, len, 0); 827 828 /* unmap remaining buffers */ 829 while (tx_desc != eop_desc) { 830 i40e_trace(clean_tx_irq_unmap, 831 tx_ring, tx_desc, tx_buf); 832 833 tx_buf++; 834 tx_desc++; 835 i++; 836 if (unlikely(!i)) { 837 i -= tx_ring->count; 838 tx_buf = tx_ring->tx_bi; 839 tx_desc = I40E_TX_DESC(tx_ring, 0); 840 } 841 842 /* unmap any remaining paged data */ 843 if (dma_unmap_len(tx_buf, len)) { 844 dma_unmap_page(tx_ring->dev, 845 dma_unmap_addr(tx_buf, dma), 846 dma_unmap_len(tx_buf, len), 847 DMA_TO_DEVICE); 848 dma_unmap_len_set(tx_buf, len, 0); 849 } 850 } 851 852 /* move us one more past the eop_desc for start of next pkt */ 853 tx_buf++; 854 tx_desc++; 855 i++; 856 if (unlikely(!i)) { 857 i -= tx_ring->count; 858 tx_buf = tx_ring->tx_bi; 859 tx_desc = I40E_TX_DESC(tx_ring, 0); 860 } 861 862 prefetch(tx_desc); 863 864 /* update budget accounting */ 865 budget--; 866 } while (likely(budget)); 867 868 i += tx_ring->count; 869 tx_ring->next_to_clean = i; 870 i40e_update_tx_stats(tx_ring, total_packets, total_bytes); 871 i40e_arm_wb(tx_ring, vsi, budget); 872 873 if (ring_is_xdp(tx_ring)) 874 return !!budget; 875 876 /* notify netdev of completed buffers */ 877 netdev_tx_completed_queue(txring_txq(tx_ring), 878 total_packets, total_bytes); 879 880 #define TX_WAKE_THRESHOLD ((s16)(DESC_NEEDED * 2)) 881 if (unlikely(total_packets && netif_carrier_ok(tx_ring->netdev) && 882 (I40E_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD))) { 883 /* Make sure that anybody stopping the queue after this 884 * sees the new next_to_clean. 885 */ 886 smp_mb(); 887 if (__netif_subqueue_stopped(tx_ring->netdev, 888 tx_ring->queue_index) && 889 !test_bit(__I40E_VSI_DOWN, vsi->state)) { 890 netif_wake_subqueue(tx_ring->netdev, 891 tx_ring->queue_index); 892 ++tx_ring->tx_stats.restart_queue; 893 } 894 } 895 896 return !!budget; 897 } 898 899 /** 900 * i40e_enable_wb_on_itr - Arm hardware to do a wb, interrupts are not enabled 901 * @vsi: the VSI we care about 902 * @q_vector: the vector on which to enable writeback 903 * 904 **/ 905 static void i40e_enable_wb_on_itr(struct i40e_vsi *vsi, 906 struct i40e_q_vector *q_vector) 907 { 908 u16 flags = q_vector->tx.ring[0].flags; 909 u32 val; 910 911 if (!(flags & I40E_TXR_FLAGS_WB_ON_ITR)) 912 return; 913 914 if (q_vector->arm_wb_state) 915 return; 916 917 if (vsi->back->flags & I40E_FLAG_MSIX_ENABLED) { 918 val = I40E_PFINT_DYN_CTLN_WB_ON_ITR_MASK | 919 I40E_PFINT_DYN_CTLN_ITR_INDX_MASK; /* set noitr */ 920 921 wr32(&vsi->back->hw, 922 I40E_PFINT_DYN_CTLN(q_vector->reg_idx), 923 val); 924 } else { 925 val = I40E_PFINT_DYN_CTL0_WB_ON_ITR_MASK | 926 I40E_PFINT_DYN_CTL0_ITR_INDX_MASK; /* set noitr */ 927 928 wr32(&vsi->back->hw, I40E_PFINT_DYN_CTL0, val); 929 } 930 q_vector->arm_wb_state = true; 931 } 932 933 /** 934 * i40e_force_wb - Issue SW Interrupt so HW does a wb 935 * @vsi: the VSI we care about 936 * @q_vector: the vector on which to force writeback 937 * 938 **/ 939 void i40e_force_wb(struct i40e_vsi *vsi, struct i40e_q_vector *q_vector) 940 { 941 if (vsi->back->flags & I40E_FLAG_MSIX_ENABLED) { 942 u32 val = I40E_PFINT_DYN_CTLN_INTENA_MASK | 943 I40E_PFINT_DYN_CTLN_ITR_INDX_MASK | /* set noitr */ 944 I40E_PFINT_DYN_CTLN_SWINT_TRIG_MASK | 945 I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_MASK; 946 /* allow 00 to be written to the index */ 947 948 wr32(&vsi->back->hw, 949 I40E_PFINT_DYN_CTLN(q_vector->reg_idx), val); 950 } else { 951 u32 val = I40E_PFINT_DYN_CTL0_INTENA_MASK | 952 I40E_PFINT_DYN_CTL0_ITR_INDX_MASK | /* set noitr */ 953 I40E_PFINT_DYN_CTL0_SWINT_TRIG_MASK | 954 I40E_PFINT_DYN_CTL0_SW_ITR_INDX_ENA_MASK; 955 /* allow 00 to be written to the index */ 956 957 wr32(&vsi->back->hw, I40E_PFINT_DYN_CTL0, val); 958 } 959 } 960 961 static inline bool i40e_container_is_rx(struct i40e_q_vector *q_vector, 962 struct i40e_ring_container *rc) 963 { 964 return &q_vector->rx == rc; 965 } 966 967 static inline unsigned int i40e_itr_divisor(struct i40e_q_vector *q_vector) 968 { 969 unsigned int divisor; 970 971 switch (q_vector->vsi->back->hw.phy.link_info.link_speed) { 972 case I40E_LINK_SPEED_40GB: 973 divisor = I40E_ITR_ADAPTIVE_MIN_INC * 1024; 974 break; 975 case I40E_LINK_SPEED_25GB: 976 case I40E_LINK_SPEED_20GB: 977 divisor = I40E_ITR_ADAPTIVE_MIN_INC * 512; 978 break; 979 default: 980 case I40E_LINK_SPEED_10GB: 981 divisor = I40E_ITR_ADAPTIVE_MIN_INC * 256; 982 break; 983 case I40E_LINK_SPEED_1GB: 984 case I40E_LINK_SPEED_100MB: 985 divisor = I40E_ITR_ADAPTIVE_MIN_INC * 32; 986 break; 987 } 988 989 return divisor; 990 } 991 992 /** 993 * i40e_update_itr - update the dynamic ITR value based on statistics 994 * @q_vector: structure containing interrupt and ring information 995 * @rc: structure containing ring performance data 996 * 997 * Stores a new ITR value based on packets and byte 998 * counts during the last interrupt. The advantage of per interrupt 999 * computation is faster updates and more accurate ITR for the current 1000 * traffic pattern. Constants in this function were computed 1001 * based on theoretical maximum wire speed and thresholds were set based 1002 * on testing data as well as attempting to minimize response time 1003 * while increasing bulk throughput. 1004 **/ 1005 static void i40e_update_itr(struct i40e_q_vector *q_vector, 1006 struct i40e_ring_container *rc) 1007 { 1008 unsigned int avg_wire_size, packets, bytes, itr; 1009 unsigned long next_update = jiffies; 1010 1011 /* If we don't have any rings just leave ourselves set for maximum 1012 * possible latency so we take ourselves out of the equation. 1013 */ 1014 if (!rc->ring || !ITR_IS_DYNAMIC(rc->ring->itr_setting)) 1015 return; 1016 1017 /* For Rx we want to push the delay up and default to low latency. 1018 * for Tx we want to pull the delay down and default to high latency. 1019 */ 1020 itr = i40e_container_is_rx(q_vector, rc) ? 1021 I40E_ITR_ADAPTIVE_MIN_USECS | I40E_ITR_ADAPTIVE_LATENCY : 1022 I40E_ITR_ADAPTIVE_MAX_USECS | I40E_ITR_ADAPTIVE_LATENCY; 1023 1024 /* If we didn't update within up to 1 - 2 jiffies we can assume 1025 * that either packets are coming in so slow there hasn't been 1026 * any work, or that there is so much work that NAPI is dealing 1027 * with interrupt moderation and we don't need to do anything. 1028 */ 1029 if (time_after(next_update, rc->next_update)) 1030 goto clear_counts; 1031 1032 /* If itr_countdown is set it means we programmed an ITR within 1033 * the last 4 interrupt cycles. This has a side effect of us 1034 * potentially firing an early interrupt. In order to work around 1035 * this we need to throw out any data received for a few 1036 * interrupts following the update. 1037 */ 1038 if (q_vector->itr_countdown) { 1039 itr = rc->target_itr; 1040 goto clear_counts; 1041 } 1042 1043 packets = rc->total_packets; 1044 bytes = rc->total_bytes; 1045 1046 if (i40e_container_is_rx(q_vector, rc)) { 1047 /* If Rx there are 1 to 4 packets and bytes are less than 1048 * 9000 assume insufficient data to use bulk rate limiting 1049 * approach unless Tx is already in bulk rate limiting. We 1050 * are likely latency driven. 1051 */ 1052 if (packets && packets < 4 && bytes < 9000 && 1053 (q_vector->tx.target_itr & I40E_ITR_ADAPTIVE_LATENCY)) { 1054 itr = I40E_ITR_ADAPTIVE_LATENCY; 1055 goto adjust_by_size; 1056 } 1057 } else if (packets < 4) { 1058 /* If we have Tx and Rx ITR maxed and Tx ITR is running in 1059 * bulk mode and we are receiving 4 or fewer packets just 1060 * reset the ITR_ADAPTIVE_LATENCY bit for latency mode so 1061 * that the Rx can relax. 1062 */ 1063 if (rc->target_itr == I40E_ITR_ADAPTIVE_MAX_USECS && 1064 (q_vector->rx.target_itr & I40E_ITR_MASK) == 1065 I40E_ITR_ADAPTIVE_MAX_USECS) 1066 goto clear_counts; 1067 } else if (packets > 32) { 1068 /* If we have processed over 32 packets in a single interrupt 1069 * for Tx assume we need to switch over to "bulk" mode. 1070 */ 1071 rc->target_itr &= ~I40E_ITR_ADAPTIVE_LATENCY; 1072 } 1073 1074 /* We have no packets to actually measure against. This means 1075 * either one of the other queues on this vector is active or 1076 * we are a Tx queue doing TSO with too high of an interrupt rate. 1077 * 1078 * Between 4 and 56 we can assume that our current interrupt delay 1079 * is only slightly too low. As such we should increase it by a small 1080 * fixed amount. 1081 */ 1082 if (packets < 56) { 1083 itr = rc->target_itr + I40E_ITR_ADAPTIVE_MIN_INC; 1084 if ((itr & I40E_ITR_MASK) > I40E_ITR_ADAPTIVE_MAX_USECS) { 1085 itr &= I40E_ITR_ADAPTIVE_LATENCY; 1086 itr += I40E_ITR_ADAPTIVE_MAX_USECS; 1087 } 1088 goto clear_counts; 1089 } 1090 1091 if (packets <= 256) { 1092 itr = min(q_vector->tx.current_itr, q_vector->rx.current_itr); 1093 itr &= I40E_ITR_MASK; 1094 1095 /* Between 56 and 112 is our "goldilocks" zone where we are 1096 * working out "just right". Just report that our current 1097 * ITR is good for us. 1098 */ 1099 if (packets <= 112) 1100 goto clear_counts; 1101 1102 /* If packet count is 128 or greater we are likely looking 1103 * at a slight overrun of the delay we want. Try halving 1104 * our delay to see if that will cut the number of packets 1105 * in half per interrupt. 1106 */ 1107 itr /= 2; 1108 itr &= I40E_ITR_MASK; 1109 if (itr < I40E_ITR_ADAPTIVE_MIN_USECS) 1110 itr = I40E_ITR_ADAPTIVE_MIN_USECS; 1111 1112 goto clear_counts; 1113 } 1114 1115 /* The paths below assume we are dealing with a bulk ITR since 1116 * number of packets is greater than 256. We are just going to have 1117 * to compute a value and try to bring the count under control, 1118 * though for smaller packet sizes there isn't much we can do as 1119 * NAPI polling will likely be kicking in sooner rather than later. 1120 */ 1121 itr = I40E_ITR_ADAPTIVE_BULK; 1122 1123 adjust_by_size: 1124 /* If packet counts are 256 or greater we can assume we have a gross 1125 * overestimation of what the rate should be. Instead of trying to fine 1126 * tune it just use the formula below to try and dial in an exact value 1127 * give the current packet size of the frame. 1128 */ 1129 avg_wire_size = bytes / packets; 1130 1131 /* The following is a crude approximation of: 1132 * wmem_default / (size + overhead) = desired_pkts_per_int 1133 * rate / bits_per_byte / (size + ethernet overhead) = pkt_rate 1134 * (desired_pkt_rate / pkt_rate) * usecs_per_sec = ITR value 1135 * 1136 * Assuming wmem_default is 212992 and overhead is 640 bytes per 1137 * packet, (256 skb, 64 headroom, 320 shared info), we can reduce the 1138 * formula down to 1139 * 1140 * (170 * (size + 24)) / (size + 640) = ITR 1141 * 1142 * We first do some math on the packet size and then finally bitshift 1143 * by 8 after rounding up. We also have to account for PCIe link speed 1144 * difference as ITR scales based on this. 1145 */ 1146 if (avg_wire_size <= 60) { 1147 /* Start at 250k ints/sec */ 1148 avg_wire_size = 4096; 1149 } else if (avg_wire_size <= 380) { 1150 /* 250K ints/sec to 60K ints/sec */ 1151 avg_wire_size *= 40; 1152 avg_wire_size += 1696; 1153 } else if (avg_wire_size <= 1084) { 1154 /* 60K ints/sec to 36K ints/sec */ 1155 avg_wire_size *= 15; 1156 avg_wire_size += 11452; 1157 } else if (avg_wire_size <= 1980) { 1158 /* 36K ints/sec to 30K ints/sec */ 1159 avg_wire_size *= 5; 1160 avg_wire_size += 22420; 1161 } else { 1162 /* plateau at a limit of 30K ints/sec */ 1163 avg_wire_size = 32256; 1164 } 1165 1166 /* If we are in low latency mode halve our delay which doubles the 1167 * rate to somewhere between 100K to 16K ints/sec 1168 */ 1169 if (itr & I40E_ITR_ADAPTIVE_LATENCY) 1170 avg_wire_size /= 2; 1171 1172 /* Resultant value is 256 times larger than it needs to be. This 1173 * gives us room to adjust the value as needed to either increase 1174 * or decrease the value based on link speeds of 10G, 2.5G, 1G, etc. 1175 * 1176 * Use addition as we have already recorded the new latency flag 1177 * for the ITR value. 1178 */ 1179 itr += DIV_ROUND_UP(avg_wire_size, i40e_itr_divisor(q_vector)) * 1180 I40E_ITR_ADAPTIVE_MIN_INC; 1181 1182 if ((itr & I40E_ITR_MASK) > I40E_ITR_ADAPTIVE_MAX_USECS) { 1183 itr &= I40E_ITR_ADAPTIVE_LATENCY; 1184 itr += I40E_ITR_ADAPTIVE_MAX_USECS; 1185 } 1186 1187 clear_counts: 1188 /* write back value */ 1189 rc->target_itr = itr; 1190 1191 /* next update should occur within next jiffy */ 1192 rc->next_update = next_update + 1; 1193 1194 rc->total_bytes = 0; 1195 rc->total_packets = 0; 1196 } 1197 1198 /** 1199 * i40e_reuse_rx_page - page flip buffer and store it back on the ring 1200 * @rx_ring: rx descriptor ring to store buffers on 1201 * @old_buff: donor buffer to have page reused 1202 * 1203 * Synchronizes page for reuse by the adapter 1204 **/ 1205 static void i40e_reuse_rx_page(struct i40e_ring *rx_ring, 1206 struct i40e_rx_buffer *old_buff) 1207 { 1208 struct i40e_rx_buffer *new_buff; 1209 u16 nta = rx_ring->next_to_alloc; 1210 1211 new_buff = &rx_ring->rx_bi[nta]; 1212 1213 /* update, and store next to alloc */ 1214 nta++; 1215 rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0; 1216 1217 /* transfer page from old buffer to new buffer */ 1218 new_buff->dma = old_buff->dma; 1219 new_buff->page = old_buff->page; 1220 new_buff->page_offset = old_buff->page_offset; 1221 new_buff->pagecnt_bias = old_buff->pagecnt_bias; 1222 1223 rx_ring->rx_stats.page_reuse_count++; 1224 1225 /* clear contents of buffer_info */ 1226 old_buff->page = NULL; 1227 } 1228 1229 /** 1230 * i40e_rx_is_programming_status - check for programming status descriptor 1231 * @qw: qword representing status_error_len in CPU ordering 1232 * 1233 * The value of in the descriptor length field indicate if this 1234 * is a programming status descriptor for flow director or FCoE 1235 * by the value of I40E_RX_PROG_STATUS_DESC_LENGTH, otherwise 1236 * it is a packet descriptor. 1237 **/ 1238 static inline bool i40e_rx_is_programming_status(u64 qw) 1239 { 1240 /* The Rx filter programming status and SPH bit occupy the same 1241 * spot in the descriptor. Since we don't support packet split we 1242 * can just reuse the bit as an indication that this is a 1243 * programming status descriptor. 1244 */ 1245 return qw & I40E_RXD_QW1_LENGTH_SPH_MASK; 1246 } 1247 1248 /** 1249 * i40e_clean_programming_status - try clean the programming status descriptor 1250 * @rx_ring: the rx ring that has this descriptor 1251 * @rx_desc: the rx descriptor written back by HW 1252 * @qw: qword representing status_error_len in CPU ordering 1253 * 1254 * Flow director should handle FD_FILTER_STATUS to check its filter programming 1255 * status being successful or not and take actions accordingly. FCoE should 1256 * handle its context/filter programming/invalidation status and take actions. 1257 * 1258 * Returns an i40e_rx_buffer to reuse if the cleanup occurred, otherwise NULL. 1259 **/ 1260 struct i40e_rx_buffer *i40e_clean_programming_status( 1261 struct i40e_ring *rx_ring, 1262 union i40e_rx_desc *rx_desc, 1263 u64 qw) 1264 { 1265 struct i40e_rx_buffer *rx_buffer; 1266 u32 ntc; 1267 u8 id; 1268 1269 if (!i40e_rx_is_programming_status(qw)) 1270 return NULL; 1271 1272 ntc = rx_ring->next_to_clean; 1273 1274 /* fetch, update, and store next to clean */ 1275 rx_buffer = &rx_ring->rx_bi[ntc++]; 1276 ntc = (ntc < rx_ring->count) ? ntc : 0; 1277 rx_ring->next_to_clean = ntc; 1278 1279 prefetch(I40E_RX_DESC(rx_ring, ntc)); 1280 1281 id = (qw & I40E_RX_PROG_STATUS_DESC_QW1_PROGID_MASK) >> 1282 I40E_RX_PROG_STATUS_DESC_QW1_PROGID_SHIFT; 1283 1284 if (id == I40E_RX_PROG_STATUS_DESC_FD_FILTER_STATUS) 1285 i40e_fd_handle_status(rx_ring, rx_desc, id); 1286 1287 return rx_buffer; 1288 } 1289 1290 /** 1291 * i40e_setup_tx_descriptors - Allocate the Tx descriptors 1292 * @tx_ring: the tx ring to set up 1293 * 1294 * Return 0 on success, negative on error 1295 **/ 1296 int i40e_setup_tx_descriptors(struct i40e_ring *tx_ring) 1297 { 1298 struct device *dev = tx_ring->dev; 1299 int bi_size; 1300 1301 if (!dev) 1302 return -ENOMEM; 1303 1304 /* warn if we are about to overwrite the pointer */ 1305 WARN_ON(tx_ring->tx_bi); 1306 bi_size = sizeof(struct i40e_tx_buffer) * tx_ring->count; 1307 tx_ring->tx_bi = kzalloc(bi_size, GFP_KERNEL); 1308 if (!tx_ring->tx_bi) 1309 goto err; 1310 1311 u64_stats_init(&tx_ring->syncp); 1312 1313 /* round up to nearest 4K */ 1314 tx_ring->size = tx_ring->count * sizeof(struct i40e_tx_desc); 1315 /* add u32 for head writeback, align after this takes care of 1316 * guaranteeing this is at least one cache line in size 1317 */ 1318 tx_ring->size += sizeof(u32); 1319 tx_ring->size = ALIGN(tx_ring->size, 4096); 1320 tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size, 1321 &tx_ring->dma, GFP_KERNEL); 1322 if (!tx_ring->desc) { 1323 dev_info(dev, "Unable to allocate memory for the Tx descriptor ring, size=%d\n", 1324 tx_ring->size); 1325 goto err; 1326 } 1327 1328 tx_ring->next_to_use = 0; 1329 tx_ring->next_to_clean = 0; 1330 tx_ring->tx_stats.prev_pkt_ctr = -1; 1331 return 0; 1332 1333 err: 1334 kfree(tx_ring->tx_bi); 1335 tx_ring->tx_bi = NULL; 1336 return -ENOMEM; 1337 } 1338 1339 /** 1340 * i40e_clean_rx_ring - Free Rx buffers 1341 * @rx_ring: ring to be cleaned 1342 **/ 1343 void i40e_clean_rx_ring(struct i40e_ring *rx_ring) 1344 { 1345 unsigned long bi_size; 1346 u16 i; 1347 1348 /* ring already cleared, nothing to do */ 1349 if (!rx_ring->rx_bi) 1350 return; 1351 1352 if (rx_ring->skb) { 1353 dev_kfree_skb(rx_ring->skb); 1354 rx_ring->skb = NULL; 1355 } 1356 1357 if (rx_ring->xsk_umem) { 1358 i40e_xsk_clean_rx_ring(rx_ring); 1359 goto skip_free; 1360 } 1361 1362 /* Free all the Rx ring sk_buffs */ 1363 for (i = 0; i < rx_ring->count; i++) { 1364 struct i40e_rx_buffer *rx_bi = &rx_ring->rx_bi[i]; 1365 1366 if (!rx_bi->page) 1367 continue; 1368 1369 /* Invalidate cache lines that may have been written to by 1370 * device so that we avoid corrupting memory. 1371 */ 1372 dma_sync_single_range_for_cpu(rx_ring->dev, 1373 rx_bi->dma, 1374 rx_bi->page_offset, 1375 rx_ring->rx_buf_len, 1376 DMA_FROM_DEVICE); 1377 1378 /* free resources associated with mapping */ 1379 dma_unmap_page_attrs(rx_ring->dev, rx_bi->dma, 1380 i40e_rx_pg_size(rx_ring), 1381 DMA_FROM_DEVICE, 1382 I40E_RX_DMA_ATTR); 1383 1384 __page_frag_cache_drain(rx_bi->page, rx_bi->pagecnt_bias); 1385 1386 rx_bi->page = NULL; 1387 rx_bi->page_offset = 0; 1388 } 1389 1390 skip_free: 1391 bi_size = sizeof(struct i40e_rx_buffer) * rx_ring->count; 1392 memset(rx_ring->rx_bi, 0, bi_size); 1393 1394 /* Zero out the descriptor ring */ 1395 memset(rx_ring->desc, 0, rx_ring->size); 1396 1397 rx_ring->next_to_alloc = 0; 1398 rx_ring->next_to_clean = 0; 1399 rx_ring->next_to_use = 0; 1400 } 1401 1402 /** 1403 * i40e_free_rx_resources - Free Rx resources 1404 * @rx_ring: ring to clean the resources from 1405 * 1406 * Free all receive software resources 1407 **/ 1408 void i40e_free_rx_resources(struct i40e_ring *rx_ring) 1409 { 1410 i40e_clean_rx_ring(rx_ring); 1411 if (rx_ring->vsi->type == I40E_VSI_MAIN) 1412 xdp_rxq_info_unreg(&rx_ring->xdp_rxq); 1413 rx_ring->xdp_prog = NULL; 1414 kfree(rx_ring->rx_bi); 1415 rx_ring->rx_bi = NULL; 1416 1417 if (rx_ring->desc) { 1418 dma_free_coherent(rx_ring->dev, rx_ring->size, 1419 rx_ring->desc, rx_ring->dma); 1420 rx_ring->desc = NULL; 1421 } 1422 } 1423 1424 /** 1425 * i40e_setup_rx_descriptors - Allocate Rx descriptors 1426 * @rx_ring: Rx descriptor ring (for a specific queue) to setup 1427 * 1428 * Returns 0 on success, negative on failure 1429 **/ 1430 int i40e_setup_rx_descriptors(struct i40e_ring *rx_ring) 1431 { 1432 struct device *dev = rx_ring->dev; 1433 int err = -ENOMEM; 1434 int bi_size; 1435 1436 /* warn if we are about to overwrite the pointer */ 1437 WARN_ON(rx_ring->rx_bi); 1438 bi_size = sizeof(struct i40e_rx_buffer) * rx_ring->count; 1439 rx_ring->rx_bi = kzalloc(bi_size, GFP_KERNEL); 1440 if (!rx_ring->rx_bi) 1441 goto err; 1442 1443 u64_stats_init(&rx_ring->syncp); 1444 1445 /* Round up to nearest 4K */ 1446 rx_ring->size = rx_ring->count * sizeof(union i40e_32byte_rx_desc); 1447 rx_ring->size = ALIGN(rx_ring->size, 4096); 1448 rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size, 1449 &rx_ring->dma, GFP_KERNEL); 1450 1451 if (!rx_ring->desc) { 1452 dev_info(dev, "Unable to allocate memory for the Rx descriptor ring, size=%d\n", 1453 rx_ring->size); 1454 goto err; 1455 } 1456 1457 rx_ring->next_to_alloc = 0; 1458 rx_ring->next_to_clean = 0; 1459 rx_ring->next_to_use = 0; 1460 1461 /* XDP RX-queue info only needed for RX rings exposed to XDP */ 1462 if (rx_ring->vsi->type == I40E_VSI_MAIN) { 1463 err = xdp_rxq_info_reg(&rx_ring->xdp_rxq, rx_ring->netdev, 1464 rx_ring->queue_index); 1465 if (err < 0) 1466 goto err; 1467 } 1468 1469 rx_ring->xdp_prog = rx_ring->vsi->xdp_prog; 1470 1471 return 0; 1472 err: 1473 kfree(rx_ring->rx_bi); 1474 rx_ring->rx_bi = NULL; 1475 return err; 1476 } 1477 1478 /** 1479 * i40e_release_rx_desc - Store the new tail and head values 1480 * @rx_ring: ring to bump 1481 * @val: new head index 1482 **/ 1483 void i40e_release_rx_desc(struct i40e_ring *rx_ring, u32 val) 1484 { 1485 rx_ring->next_to_use = val; 1486 1487 /* update next to alloc since we have filled the ring */ 1488 rx_ring->next_to_alloc = val; 1489 1490 /* Force memory writes to complete before letting h/w 1491 * know there are new descriptors to fetch. (Only 1492 * applicable for weak-ordered memory model archs, 1493 * such as IA-64). 1494 */ 1495 wmb(); 1496 writel(val, rx_ring->tail); 1497 } 1498 1499 /** 1500 * i40e_rx_offset - Return expected offset into page to access data 1501 * @rx_ring: Ring we are requesting offset of 1502 * 1503 * Returns the offset value for ring into the data buffer. 1504 */ 1505 static inline unsigned int i40e_rx_offset(struct i40e_ring *rx_ring) 1506 { 1507 return ring_uses_build_skb(rx_ring) ? I40E_SKB_PAD : 0; 1508 } 1509 1510 /** 1511 * i40e_alloc_mapped_page - recycle or make a new page 1512 * @rx_ring: ring to use 1513 * @bi: rx_buffer struct to modify 1514 * 1515 * Returns true if the page was successfully allocated or 1516 * reused. 1517 **/ 1518 static bool i40e_alloc_mapped_page(struct i40e_ring *rx_ring, 1519 struct i40e_rx_buffer *bi) 1520 { 1521 struct page *page = bi->page; 1522 dma_addr_t dma; 1523 1524 /* since we are recycling buffers we should seldom need to alloc */ 1525 if (likely(page)) { 1526 rx_ring->rx_stats.page_reuse_count++; 1527 return true; 1528 } 1529 1530 /* alloc new page for storage */ 1531 page = dev_alloc_pages(i40e_rx_pg_order(rx_ring)); 1532 if (unlikely(!page)) { 1533 rx_ring->rx_stats.alloc_page_failed++; 1534 return false; 1535 } 1536 1537 /* map page for use */ 1538 dma = dma_map_page_attrs(rx_ring->dev, page, 0, 1539 i40e_rx_pg_size(rx_ring), 1540 DMA_FROM_DEVICE, 1541 I40E_RX_DMA_ATTR); 1542 1543 /* if mapping failed free memory back to system since 1544 * there isn't much point in holding memory we can't use 1545 */ 1546 if (dma_mapping_error(rx_ring->dev, dma)) { 1547 __free_pages(page, i40e_rx_pg_order(rx_ring)); 1548 rx_ring->rx_stats.alloc_page_failed++; 1549 return false; 1550 } 1551 1552 bi->dma = dma; 1553 bi->page = page; 1554 bi->page_offset = i40e_rx_offset(rx_ring); 1555 page_ref_add(page, USHRT_MAX - 1); 1556 bi->pagecnt_bias = USHRT_MAX; 1557 1558 return true; 1559 } 1560 1561 /** 1562 * i40e_alloc_rx_buffers - Replace used receive buffers 1563 * @rx_ring: ring to place buffers on 1564 * @cleaned_count: number of buffers to replace 1565 * 1566 * Returns false if all allocations were successful, true if any fail 1567 **/ 1568 bool i40e_alloc_rx_buffers(struct i40e_ring *rx_ring, u16 cleaned_count) 1569 { 1570 u16 ntu = rx_ring->next_to_use; 1571 union i40e_rx_desc *rx_desc; 1572 struct i40e_rx_buffer *bi; 1573 1574 /* do nothing if no valid netdev defined */ 1575 if (!rx_ring->netdev || !cleaned_count) 1576 return false; 1577 1578 rx_desc = I40E_RX_DESC(rx_ring, ntu); 1579 bi = &rx_ring->rx_bi[ntu]; 1580 1581 do { 1582 if (!i40e_alloc_mapped_page(rx_ring, bi)) 1583 goto no_buffers; 1584 1585 /* sync the buffer for use by the device */ 1586 dma_sync_single_range_for_device(rx_ring->dev, bi->dma, 1587 bi->page_offset, 1588 rx_ring->rx_buf_len, 1589 DMA_FROM_DEVICE); 1590 1591 /* Refresh the desc even if buffer_addrs didn't change 1592 * because each write-back erases this info. 1593 */ 1594 rx_desc->read.pkt_addr = cpu_to_le64(bi->dma + bi->page_offset); 1595 1596 rx_desc++; 1597 bi++; 1598 ntu++; 1599 if (unlikely(ntu == rx_ring->count)) { 1600 rx_desc = I40E_RX_DESC(rx_ring, 0); 1601 bi = rx_ring->rx_bi; 1602 ntu = 0; 1603 } 1604 1605 /* clear the status bits for the next_to_use descriptor */ 1606 rx_desc->wb.qword1.status_error_len = 0; 1607 1608 cleaned_count--; 1609 } while (cleaned_count); 1610 1611 if (rx_ring->next_to_use != ntu) 1612 i40e_release_rx_desc(rx_ring, ntu); 1613 1614 return false; 1615 1616 no_buffers: 1617 if (rx_ring->next_to_use != ntu) 1618 i40e_release_rx_desc(rx_ring, ntu); 1619 1620 /* make sure to come back via polling to try again after 1621 * allocation failure 1622 */ 1623 return true; 1624 } 1625 1626 /** 1627 * i40e_rx_checksum - Indicate in skb if hw indicated a good cksum 1628 * @vsi: the VSI we care about 1629 * @skb: skb currently being received and modified 1630 * @rx_desc: the receive descriptor 1631 **/ 1632 static inline void i40e_rx_checksum(struct i40e_vsi *vsi, 1633 struct sk_buff *skb, 1634 union i40e_rx_desc *rx_desc) 1635 { 1636 struct i40e_rx_ptype_decoded decoded; 1637 u32 rx_error, rx_status; 1638 bool ipv4, ipv6; 1639 u8 ptype; 1640 u64 qword; 1641 1642 qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len); 1643 ptype = (qword & I40E_RXD_QW1_PTYPE_MASK) >> I40E_RXD_QW1_PTYPE_SHIFT; 1644 rx_error = (qword & I40E_RXD_QW1_ERROR_MASK) >> 1645 I40E_RXD_QW1_ERROR_SHIFT; 1646 rx_status = (qword & I40E_RXD_QW1_STATUS_MASK) >> 1647 I40E_RXD_QW1_STATUS_SHIFT; 1648 decoded = decode_rx_desc_ptype(ptype); 1649 1650 skb->ip_summed = CHECKSUM_NONE; 1651 1652 skb_checksum_none_assert(skb); 1653 1654 /* Rx csum enabled and ip headers found? */ 1655 if (!(vsi->netdev->features & NETIF_F_RXCSUM)) 1656 return; 1657 1658 /* did the hardware decode the packet and checksum? */ 1659 if (!(rx_status & BIT(I40E_RX_DESC_STATUS_L3L4P_SHIFT))) 1660 return; 1661 1662 /* both known and outer_ip must be set for the below code to work */ 1663 if (!(decoded.known && decoded.outer_ip)) 1664 return; 1665 1666 ipv4 = (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP) && 1667 (decoded.outer_ip_ver == I40E_RX_PTYPE_OUTER_IPV4); 1668 ipv6 = (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP) && 1669 (decoded.outer_ip_ver == I40E_RX_PTYPE_OUTER_IPV6); 1670 1671 if (ipv4 && 1672 (rx_error & (BIT(I40E_RX_DESC_ERROR_IPE_SHIFT) | 1673 BIT(I40E_RX_DESC_ERROR_EIPE_SHIFT)))) 1674 goto checksum_fail; 1675 1676 /* likely incorrect csum if alternate IP extension headers found */ 1677 if (ipv6 && 1678 rx_status & BIT(I40E_RX_DESC_STATUS_IPV6EXADD_SHIFT)) 1679 /* don't increment checksum err here, non-fatal err */ 1680 return; 1681 1682 /* there was some L4 error, count error and punt packet to the stack */ 1683 if (rx_error & BIT(I40E_RX_DESC_ERROR_L4E_SHIFT)) 1684 goto checksum_fail; 1685 1686 /* handle packets that were not able to be checksummed due 1687 * to arrival speed, in this case the stack can compute 1688 * the csum. 1689 */ 1690 if (rx_error & BIT(I40E_RX_DESC_ERROR_PPRS_SHIFT)) 1691 return; 1692 1693 /* If there is an outer header present that might contain a checksum 1694 * we need to bump the checksum level by 1 to reflect the fact that 1695 * we are indicating we validated the inner checksum. 1696 */ 1697 if (decoded.tunnel_type >= I40E_RX_PTYPE_TUNNEL_IP_GRENAT) 1698 skb->csum_level = 1; 1699 1700 /* Only report checksum unnecessary for TCP, UDP, or SCTP */ 1701 switch (decoded.inner_prot) { 1702 case I40E_RX_PTYPE_INNER_PROT_TCP: 1703 case I40E_RX_PTYPE_INNER_PROT_UDP: 1704 case I40E_RX_PTYPE_INNER_PROT_SCTP: 1705 skb->ip_summed = CHECKSUM_UNNECESSARY; 1706 /* fall though */ 1707 default: 1708 break; 1709 } 1710 1711 return; 1712 1713 checksum_fail: 1714 vsi->back->hw_csum_rx_error++; 1715 } 1716 1717 /** 1718 * i40e_ptype_to_htype - get a hash type 1719 * @ptype: the ptype value from the descriptor 1720 * 1721 * Returns a hash type to be used by skb_set_hash 1722 **/ 1723 static inline int i40e_ptype_to_htype(u8 ptype) 1724 { 1725 struct i40e_rx_ptype_decoded decoded = decode_rx_desc_ptype(ptype); 1726 1727 if (!decoded.known) 1728 return PKT_HASH_TYPE_NONE; 1729 1730 if (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP && 1731 decoded.payload_layer == I40E_RX_PTYPE_PAYLOAD_LAYER_PAY4) 1732 return PKT_HASH_TYPE_L4; 1733 else if (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP && 1734 decoded.payload_layer == I40E_RX_PTYPE_PAYLOAD_LAYER_PAY3) 1735 return PKT_HASH_TYPE_L3; 1736 else 1737 return PKT_HASH_TYPE_L2; 1738 } 1739 1740 /** 1741 * i40e_rx_hash - set the hash value in the skb 1742 * @ring: descriptor ring 1743 * @rx_desc: specific descriptor 1744 * @skb: skb currently being received and modified 1745 * @rx_ptype: Rx packet type 1746 **/ 1747 static inline void i40e_rx_hash(struct i40e_ring *ring, 1748 union i40e_rx_desc *rx_desc, 1749 struct sk_buff *skb, 1750 u8 rx_ptype) 1751 { 1752 u32 hash; 1753 const __le64 rss_mask = 1754 cpu_to_le64((u64)I40E_RX_DESC_FLTSTAT_RSS_HASH << 1755 I40E_RX_DESC_STATUS_FLTSTAT_SHIFT); 1756 1757 if (!(ring->netdev->features & NETIF_F_RXHASH)) 1758 return; 1759 1760 if ((rx_desc->wb.qword1.status_error_len & rss_mask) == rss_mask) { 1761 hash = le32_to_cpu(rx_desc->wb.qword0.hi_dword.rss); 1762 skb_set_hash(skb, hash, i40e_ptype_to_htype(rx_ptype)); 1763 } 1764 } 1765 1766 /** 1767 * i40e_process_skb_fields - Populate skb header fields from Rx descriptor 1768 * @rx_ring: rx descriptor ring packet is being transacted on 1769 * @rx_desc: pointer to the EOP Rx descriptor 1770 * @skb: pointer to current skb being populated 1771 * @rx_ptype: the packet type decoded by hardware 1772 * 1773 * This function checks the ring, descriptor, and packet information in 1774 * order to populate the hash, checksum, VLAN, protocol, and 1775 * other fields within the skb. 1776 **/ 1777 void i40e_process_skb_fields(struct i40e_ring *rx_ring, 1778 union i40e_rx_desc *rx_desc, struct sk_buff *skb) 1779 { 1780 u64 qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len); 1781 u32 rx_status = (qword & I40E_RXD_QW1_STATUS_MASK) >> 1782 I40E_RXD_QW1_STATUS_SHIFT; 1783 u32 tsynvalid = rx_status & I40E_RXD_QW1_STATUS_TSYNVALID_MASK; 1784 u32 tsyn = (rx_status & I40E_RXD_QW1_STATUS_TSYNINDX_MASK) >> 1785 I40E_RXD_QW1_STATUS_TSYNINDX_SHIFT; 1786 u8 rx_ptype = (qword & I40E_RXD_QW1_PTYPE_MASK) >> 1787 I40E_RXD_QW1_PTYPE_SHIFT; 1788 1789 if (unlikely(tsynvalid)) 1790 i40e_ptp_rx_hwtstamp(rx_ring->vsi->back, skb, tsyn); 1791 1792 i40e_rx_hash(rx_ring, rx_desc, skb, rx_ptype); 1793 1794 i40e_rx_checksum(rx_ring->vsi, skb, rx_desc); 1795 1796 skb_record_rx_queue(skb, rx_ring->queue_index); 1797 1798 if (qword & BIT(I40E_RX_DESC_STATUS_L2TAG1P_SHIFT)) { 1799 u16 vlan_tag = rx_desc->wb.qword0.lo_dword.l2tag1; 1800 1801 __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), 1802 le16_to_cpu(vlan_tag)); 1803 } 1804 1805 /* modifies the skb - consumes the enet header */ 1806 skb->protocol = eth_type_trans(skb, rx_ring->netdev); 1807 } 1808 1809 /** 1810 * i40e_cleanup_headers - Correct empty headers 1811 * @rx_ring: rx descriptor ring packet is being transacted on 1812 * @skb: pointer to current skb being fixed 1813 * @rx_desc: pointer to the EOP Rx descriptor 1814 * 1815 * Also address the case where we are pulling data in on pages only 1816 * and as such no data is present in the skb header. 1817 * 1818 * In addition if skb is not at least 60 bytes we need to pad it so that 1819 * it is large enough to qualify as a valid Ethernet frame. 1820 * 1821 * Returns true if an error was encountered and skb was freed. 1822 **/ 1823 static bool i40e_cleanup_headers(struct i40e_ring *rx_ring, struct sk_buff *skb, 1824 union i40e_rx_desc *rx_desc) 1825 1826 { 1827 /* XDP packets use error pointer so abort at this point */ 1828 if (IS_ERR(skb)) 1829 return true; 1830 1831 /* ERR_MASK will only have valid bits if EOP set, and 1832 * what we are doing here is actually checking 1833 * I40E_RX_DESC_ERROR_RXE_SHIFT, since it is the zeroth bit in 1834 * the error field 1835 */ 1836 if (unlikely(i40e_test_staterr(rx_desc, 1837 BIT(I40E_RXD_QW1_ERROR_SHIFT)))) { 1838 dev_kfree_skb_any(skb); 1839 return true; 1840 } 1841 1842 /* if eth_skb_pad returns an error the skb was freed */ 1843 if (eth_skb_pad(skb)) 1844 return true; 1845 1846 return false; 1847 } 1848 1849 /** 1850 * i40e_page_is_reusable - check if any reuse is possible 1851 * @page: page struct to check 1852 * 1853 * A page is not reusable if it was allocated under low memory 1854 * conditions, or it's not in the same NUMA node as this CPU. 1855 */ 1856 static inline bool i40e_page_is_reusable(struct page *page) 1857 { 1858 return (page_to_nid(page) == numa_mem_id()) && 1859 !page_is_pfmemalloc(page); 1860 } 1861 1862 /** 1863 * i40e_can_reuse_rx_page - Determine if this page can be reused by 1864 * the adapter for another receive 1865 * 1866 * @rx_buffer: buffer containing the page 1867 * 1868 * If page is reusable, rx_buffer->page_offset is adjusted to point to 1869 * an unused region in the page. 1870 * 1871 * For small pages, @truesize will be a constant value, half the size 1872 * of the memory at page. We'll attempt to alternate between high and 1873 * low halves of the page, with one half ready for use by the hardware 1874 * and the other half being consumed by the stack. We use the page 1875 * ref count to determine whether the stack has finished consuming the 1876 * portion of this page that was passed up with a previous packet. If 1877 * the page ref count is >1, we'll assume the "other" half page is 1878 * still busy, and this page cannot be reused. 1879 * 1880 * For larger pages, @truesize will be the actual space used by the 1881 * received packet (adjusted upward to an even multiple of the cache 1882 * line size). This will advance through the page by the amount 1883 * actually consumed by the received packets while there is still 1884 * space for a buffer. Each region of larger pages will be used at 1885 * most once, after which the page will not be reused. 1886 * 1887 * In either case, if the page is reusable its refcount is increased. 1888 **/ 1889 static bool i40e_can_reuse_rx_page(struct i40e_rx_buffer *rx_buffer) 1890 { 1891 unsigned int pagecnt_bias = rx_buffer->pagecnt_bias; 1892 struct page *page = rx_buffer->page; 1893 1894 /* Is any reuse possible? */ 1895 if (unlikely(!i40e_page_is_reusable(page))) 1896 return false; 1897 1898 #if (PAGE_SIZE < 8192) 1899 /* if we are only owner of page we can reuse it */ 1900 if (unlikely((page_count(page) - pagecnt_bias) > 1)) 1901 return false; 1902 #else 1903 #define I40E_LAST_OFFSET \ 1904 (SKB_WITH_OVERHEAD(PAGE_SIZE) - I40E_RXBUFFER_2048) 1905 if (rx_buffer->page_offset > I40E_LAST_OFFSET) 1906 return false; 1907 #endif 1908 1909 /* If we have drained the page fragment pool we need to update 1910 * the pagecnt_bias and page count so that we fully restock the 1911 * number of references the driver holds. 1912 */ 1913 if (unlikely(pagecnt_bias == 1)) { 1914 page_ref_add(page, USHRT_MAX - 1); 1915 rx_buffer->pagecnt_bias = USHRT_MAX; 1916 } 1917 1918 return true; 1919 } 1920 1921 /** 1922 * i40e_add_rx_frag - Add contents of Rx buffer to sk_buff 1923 * @rx_ring: rx descriptor ring to transact packets on 1924 * @rx_buffer: buffer containing page to add 1925 * @skb: sk_buff to place the data into 1926 * @size: packet length from rx_desc 1927 * 1928 * This function will add the data contained in rx_buffer->page to the skb. 1929 * It will just attach the page as a frag to the skb. 1930 * 1931 * The function will then update the page offset. 1932 **/ 1933 static void i40e_add_rx_frag(struct i40e_ring *rx_ring, 1934 struct i40e_rx_buffer *rx_buffer, 1935 struct sk_buff *skb, 1936 unsigned int size) 1937 { 1938 #if (PAGE_SIZE < 8192) 1939 unsigned int truesize = i40e_rx_pg_size(rx_ring) / 2; 1940 #else 1941 unsigned int truesize = SKB_DATA_ALIGN(size + i40e_rx_offset(rx_ring)); 1942 #endif 1943 1944 skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, rx_buffer->page, 1945 rx_buffer->page_offset, size, truesize); 1946 1947 /* page is being used so we must update the page offset */ 1948 #if (PAGE_SIZE < 8192) 1949 rx_buffer->page_offset ^= truesize; 1950 #else 1951 rx_buffer->page_offset += truesize; 1952 #endif 1953 } 1954 1955 /** 1956 * i40e_get_rx_buffer - Fetch Rx buffer and synchronize data for use 1957 * @rx_ring: rx descriptor ring to transact packets on 1958 * @size: size of buffer to add to skb 1959 * 1960 * This function will pull an Rx buffer from the ring and synchronize it 1961 * for use by the CPU. 1962 */ 1963 static struct i40e_rx_buffer *i40e_get_rx_buffer(struct i40e_ring *rx_ring, 1964 const unsigned int size) 1965 { 1966 struct i40e_rx_buffer *rx_buffer; 1967 1968 rx_buffer = &rx_ring->rx_bi[rx_ring->next_to_clean]; 1969 prefetchw(rx_buffer->page); 1970 1971 /* we are reusing so sync this buffer for CPU use */ 1972 dma_sync_single_range_for_cpu(rx_ring->dev, 1973 rx_buffer->dma, 1974 rx_buffer->page_offset, 1975 size, 1976 DMA_FROM_DEVICE); 1977 1978 /* We have pulled a buffer for use, so decrement pagecnt_bias */ 1979 rx_buffer->pagecnt_bias--; 1980 1981 return rx_buffer; 1982 } 1983 1984 /** 1985 * i40e_construct_skb - Allocate skb and populate it 1986 * @rx_ring: rx descriptor ring to transact packets on 1987 * @rx_buffer: rx buffer to pull data from 1988 * @xdp: xdp_buff pointing to the data 1989 * 1990 * This function allocates an skb. It then populates it with the page 1991 * data from the current receive descriptor, taking care to set up the 1992 * skb correctly. 1993 */ 1994 static struct sk_buff *i40e_construct_skb(struct i40e_ring *rx_ring, 1995 struct i40e_rx_buffer *rx_buffer, 1996 struct xdp_buff *xdp) 1997 { 1998 unsigned int size = xdp->data_end - xdp->data; 1999 #if (PAGE_SIZE < 8192) 2000 unsigned int truesize = i40e_rx_pg_size(rx_ring) / 2; 2001 #else 2002 unsigned int truesize = SKB_DATA_ALIGN(size); 2003 #endif 2004 unsigned int headlen; 2005 struct sk_buff *skb; 2006 2007 /* prefetch first cache line of first page */ 2008 prefetch(xdp->data); 2009 #if L1_CACHE_BYTES < 128 2010 prefetch(xdp->data + L1_CACHE_BYTES); 2011 #endif 2012 /* Note, we get here by enabling legacy-rx via: 2013 * 2014 * ethtool --set-priv-flags <dev> legacy-rx on 2015 * 2016 * In this mode, we currently get 0 extra XDP headroom as 2017 * opposed to having legacy-rx off, where we process XDP 2018 * packets going to stack via i40e_build_skb(). The latter 2019 * provides us currently with 192 bytes of headroom. 2020 * 2021 * For i40e_construct_skb() mode it means that the 2022 * xdp->data_meta will always point to xdp->data, since 2023 * the helper cannot expand the head. Should this ever 2024 * change in future for legacy-rx mode on, then lets also 2025 * add xdp->data_meta handling here. 2026 */ 2027 2028 /* allocate a skb to store the frags */ 2029 skb = __napi_alloc_skb(&rx_ring->q_vector->napi, 2030 I40E_RX_HDR_SIZE, 2031 GFP_ATOMIC | __GFP_NOWARN); 2032 if (unlikely(!skb)) 2033 return NULL; 2034 2035 /* Determine available headroom for copy */ 2036 headlen = size; 2037 if (headlen > I40E_RX_HDR_SIZE) 2038 headlen = eth_get_headlen(skb->dev, xdp->data, 2039 I40E_RX_HDR_SIZE); 2040 2041 /* align pull length to size of long to optimize memcpy performance */ 2042 memcpy(__skb_put(skb, headlen), xdp->data, 2043 ALIGN(headlen, sizeof(long))); 2044 2045 /* update all of the pointers */ 2046 size -= headlen; 2047 if (size) { 2048 skb_add_rx_frag(skb, 0, rx_buffer->page, 2049 rx_buffer->page_offset + headlen, 2050 size, truesize); 2051 2052 /* buffer is used by skb, update page_offset */ 2053 #if (PAGE_SIZE < 8192) 2054 rx_buffer->page_offset ^= truesize; 2055 #else 2056 rx_buffer->page_offset += truesize; 2057 #endif 2058 } else { 2059 /* buffer is unused, reset bias back to rx_buffer */ 2060 rx_buffer->pagecnt_bias++; 2061 } 2062 2063 return skb; 2064 } 2065 2066 /** 2067 * i40e_build_skb - Build skb around an existing buffer 2068 * @rx_ring: Rx descriptor ring to transact packets on 2069 * @rx_buffer: Rx buffer to pull data from 2070 * @xdp: xdp_buff pointing to the data 2071 * 2072 * This function builds an skb around an existing Rx buffer, taking care 2073 * to set up the skb correctly and avoid any memcpy overhead. 2074 */ 2075 static struct sk_buff *i40e_build_skb(struct i40e_ring *rx_ring, 2076 struct i40e_rx_buffer *rx_buffer, 2077 struct xdp_buff *xdp) 2078 { 2079 unsigned int metasize = xdp->data - xdp->data_meta; 2080 #if (PAGE_SIZE < 8192) 2081 unsigned int truesize = i40e_rx_pg_size(rx_ring) / 2; 2082 #else 2083 unsigned int truesize = SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) + 2084 SKB_DATA_ALIGN(xdp->data_end - 2085 xdp->data_hard_start); 2086 #endif 2087 struct sk_buff *skb; 2088 2089 /* Prefetch first cache line of first page. If xdp->data_meta 2090 * is unused, this points exactly as xdp->data, otherwise we 2091 * likely have a consumer accessing first few bytes of meta 2092 * data, and then actual data. 2093 */ 2094 prefetch(xdp->data_meta); 2095 #if L1_CACHE_BYTES < 128 2096 prefetch(xdp->data_meta + L1_CACHE_BYTES); 2097 #endif 2098 /* build an skb around the page buffer */ 2099 skb = build_skb(xdp->data_hard_start, truesize); 2100 if (unlikely(!skb)) 2101 return NULL; 2102 2103 /* update pointers within the skb to store the data */ 2104 skb_reserve(skb, xdp->data - xdp->data_hard_start); 2105 __skb_put(skb, xdp->data_end - xdp->data); 2106 if (metasize) 2107 skb_metadata_set(skb, metasize); 2108 2109 /* buffer is used by skb, update page_offset */ 2110 #if (PAGE_SIZE < 8192) 2111 rx_buffer->page_offset ^= truesize; 2112 #else 2113 rx_buffer->page_offset += truesize; 2114 #endif 2115 2116 return skb; 2117 } 2118 2119 /** 2120 * i40e_put_rx_buffer - Clean up used buffer and either recycle or free 2121 * @rx_ring: rx descriptor ring to transact packets on 2122 * @rx_buffer: rx buffer to pull data from 2123 * 2124 * This function will clean up the contents of the rx_buffer. It will 2125 * either recycle the buffer or unmap it and free the associated resources. 2126 */ 2127 static void i40e_put_rx_buffer(struct i40e_ring *rx_ring, 2128 struct i40e_rx_buffer *rx_buffer) 2129 { 2130 if (i40e_can_reuse_rx_page(rx_buffer)) { 2131 /* hand second half of page back to the ring */ 2132 i40e_reuse_rx_page(rx_ring, rx_buffer); 2133 } else { 2134 /* we are not reusing the buffer so unmap it */ 2135 dma_unmap_page_attrs(rx_ring->dev, rx_buffer->dma, 2136 i40e_rx_pg_size(rx_ring), 2137 DMA_FROM_DEVICE, I40E_RX_DMA_ATTR); 2138 __page_frag_cache_drain(rx_buffer->page, 2139 rx_buffer->pagecnt_bias); 2140 /* clear contents of buffer_info */ 2141 rx_buffer->page = NULL; 2142 } 2143 } 2144 2145 /** 2146 * i40e_is_non_eop - process handling of non-EOP buffers 2147 * @rx_ring: Rx ring being processed 2148 * @rx_desc: Rx descriptor for current buffer 2149 * @skb: Current socket buffer containing buffer in progress 2150 * 2151 * This function updates next to clean. If the buffer is an EOP buffer 2152 * this function exits returning false, otherwise it will place the 2153 * sk_buff in the next buffer to be chained and return true indicating 2154 * that this is in fact a non-EOP buffer. 2155 **/ 2156 static bool i40e_is_non_eop(struct i40e_ring *rx_ring, 2157 union i40e_rx_desc *rx_desc, 2158 struct sk_buff *skb) 2159 { 2160 u32 ntc = rx_ring->next_to_clean + 1; 2161 2162 /* fetch, update, and store next to clean */ 2163 ntc = (ntc < rx_ring->count) ? ntc : 0; 2164 rx_ring->next_to_clean = ntc; 2165 2166 prefetch(I40E_RX_DESC(rx_ring, ntc)); 2167 2168 /* if we are the last buffer then there is nothing else to do */ 2169 #define I40E_RXD_EOF BIT(I40E_RX_DESC_STATUS_EOF_SHIFT) 2170 if (likely(i40e_test_staterr(rx_desc, I40E_RXD_EOF))) 2171 return false; 2172 2173 rx_ring->rx_stats.non_eop_descs++; 2174 2175 return true; 2176 } 2177 2178 static int i40e_xmit_xdp_ring(struct xdp_frame *xdpf, 2179 struct i40e_ring *xdp_ring); 2180 2181 int i40e_xmit_xdp_tx_ring(struct xdp_buff *xdp, struct i40e_ring *xdp_ring) 2182 { 2183 struct xdp_frame *xdpf = convert_to_xdp_frame(xdp); 2184 2185 if (unlikely(!xdpf)) 2186 return I40E_XDP_CONSUMED; 2187 2188 return i40e_xmit_xdp_ring(xdpf, xdp_ring); 2189 } 2190 2191 /** 2192 * i40e_run_xdp - run an XDP program 2193 * @rx_ring: Rx ring being processed 2194 * @xdp: XDP buffer containing the frame 2195 **/ 2196 static struct sk_buff *i40e_run_xdp(struct i40e_ring *rx_ring, 2197 struct xdp_buff *xdp) 2198 { 2199 int err, result = I40E_XDP_PASS; 2200 struct i40e_ring *xdp_ring; 2201 struct bpf_prog *xdp_prog; 2202 u32 act; 2203 2204 rcu_read_lock(); 2205 xdp_prog = READ_ONCE(rx_ring->xdp_prog); 2206 2207 if (!xdp_prog) 2208 goto xdp_out; 2209 2210 prefetchw(xdp->data_hard_start); /* xdp_frame write */ 2211 2212 act = bpf_prog_run_xdp(xdp_prog, xdp); 2213 switch (act) { 2214 case XDP_PASS: 2215 break; 2216 case XDP_TX: 2217 xdp_ring = rx_ring->vsi->xdp_rings[rx_ring->queue_index]; 2218 result = i40e_xmit_xdp_tx_ring(xdp, xdp_ring); 2219 break; 2220 case XDP_REDIRECT: 2221 err = xdp_do_redirect(rx_ring->netdev, xdp, xdp_prog); 2222 result = !err ? I40E_XDP_REDIR : I40E_XDP_CONSUMED; 2223 break; 2224 default: 2225 bpf_warn_invalid_xdp_action(act); 2226 /* fall through */ 2227 case XDP_ABORTED: 2228 trace_xdp_exception(rx_ring->netdev, xdp_prog, act); 2229 /* fall through -- handle aborts by dropping packet */ 2230 case XDP_DROP: 2231 result = I40E_XDP_CONSUMED; 2232 break; 2233 } 2234 xdp_out: 2235 rcu_read_unlock(); 2236 return ERR_PTR(-result); 2237 } 2238 2239 /** 2240 * i40e_rx_buffer_flip - adjusted rx_buffer to point to an unused region 2241 * @rx_ring: Rx ring 2242 * @rx_buffer: Rx buffer to adjust 2243 * @size: Size of adjustment 2244 **/ 2245 static void i40e_rx_buffer_flip(struct i40e_ring *rx_ring, 2246 struct i40e_rx_buffer *rx_buffer, 2247 unsigned int size) 2248 { 2249 #if (PAGE_SIZE < 8192) 2250 unsigned int truesize = i40e_rx_pg_size(rx_ring) / 2; 2251 2252 rx_buffer->page_offset ^= truesize; 2253 #else 2254 unsigned int truesize = SKB_DATA_ALIGN(i40e_rx_offset(rx_ring) + size); 2255 2256 rx_buffer->page_offset += truesize; 2257 #endif 2258 } 2259 2260 /** 2261 * i40e_xdp_ring_update_tail - Updates the XDP Tx ring tail register 2262 * @xdp_ring: XDP Tx ring 2263 * 2264 * This function updates the XDP Tx ring tail register. 2265 **/ 2266 void i40e_xdp_ring_update_tail(struct i40e_ring *xdp_ring) 2267 { 2268 /* Force memory writes to complete before letting h/w 2269 * know there are new descriptors to fetch. 2270 */ 2271 wmb(); 2272 writel_relaxed(xdp_ring->next_to_use, xdp_ring->tail); 2273 } 2274 2275 /** 2276 * i40e_update_rx_stats - Update Rx ring statistics 2277 * @rx_ring: rx descriptor ring 2278 * @total_rx_bytes: number of bytes received 2279 * @total_rx_packets: number of packets received 2280 * 2281 * This function updates the Rx ring statistics. 2282 **/ 2283 void i40e_update_rx_stats(struct i40e_ring *rx_ring, 2284 unsigned int total_rx_bytes, 2285 unsigned int total_rx_packets) 2286 { 2287 u64_stats_update_begin(&rx_ring->syncp); 2288 rx_ring->stats.packets += total_rx_packets; 2289 rx_ring->stats.bytes += total_rx_bytes; 2290 u64_stats_update_end(&rx_ring->syncp); 2291 rx_ring->q_vector->rx.total_packets += total_rx_packets; 2292 rx_ring->q_vector->rx.total_bytes += total_rx_bytes; 2293 } 2294 2295 /** 2296 * i40e_finalize_xdp_rx - Bump XDP Tx tail and/or flush redirect map 2297 * @rx_ring: Rx ring 2298 * @xdp_res: Result of the receive batch 2299 * 2300 * This function bumps XDP Tx tail and/or flush redirect map, and 2301 * should be called when a batch of packets has been processed in the 2302 * napi loop. 2303 **/ 2304 void i40e_finalize_xdp_rx(struct i40e_ring *rx_ring, unsigned int xdp_res) 2305 { 2306 if (xdp_res & I40E_XDP_REDIR) 2307 xdp_do_flush_map(); 2308 2309 if (xdp_res & I40E_XDP_TX) { 2310 struct i40e_ring *xdp_ring = 2311 rx_ring->vsi->xdp_rings[rx_ring->queue_index]; 2312 2313 i40e_xdp_ring_update_tail(xdp_ring); 2314 } 2315 } 2316 2317 /** 2318 * i40e_clean_rx_irq - Clean completed descriptors from Rx ring - bounce buf 2319 * @rx_ring: rx descriptor ring to transact packets on 2320 * @budget: Total limit on number of packets to process 2321 * 2322 * This function provides a "bounce buffer" approach to Rx interrupt 2323 * processing. The advantage to this is that on systems that have 2324 * expensive overhead for IOMMU access this provides a means of avoiding 2325 * it by maintaining the mapping of the page to the system. 2326 * 2327 * Returns amount of work completed 2328 **/ 2329 static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget) 2330 { 2331 unsigned int total_rx_bytes = 0, total_rx_packets = 0; 2332 struct sk_buff *skb = rx_ring->skb; 2333 u16 cleaned_count = I40E_DESC_UNUSED(rx_ring); 2334 unsigned int xdp_xmit = 0; 2335 bool failure = false; 2336 struct xdp_buff xdp; 2337 2338 xdp.rxq = &rx_ring->xdp_rxq; 2339 2340 while (likely(total_rx_packets < (unsigned int)budget)) { 2341 struct i40e_rx_buffer *rx_buffer; 2342 union i40e_rx_desc *rx_desc; 2343 unsigned int size; 2344 u64 qword; 2345 2346 /* return some buffers to hardware, one at a time is too slow */ 2347 if (cleaned_count >= I40E_RX_BUFFER_WRITE) { 2348 failure = failure || 2349 i40e_alloc_rx_buffers(rx_ring, cleaned_count); 2350 cleaned_count = 0; 2351 } 2352 2353 rx_desc = I40E_RX_DESC(rx_ring, rx_ring->next_to_clean); 2354 2355 /* status_error_len will always be zero for unused descriptors 2356 * because it's cleared in cleanup, and overlaps with hdr_addr 2357 * which is always zero because packet split isn't used, if the 2358 * hardware wrote DD then the length will be non-zero 2359 */ 2360 qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len); 2361 2362 /* This memory barrier is needed to keep us from reading 2363 * any other fields out of the rx_desc until we have 2364 * verified the descriptor has been written back. 2365 */ 2366 dma_rmb(); 2367 2368 rx_buffer = i40e_clean_programming_status(rx_ring, rx_desc, 2369 qword); 2370 if (unlikely(rx_buffer)) { 2371 i40e_reuse_rx_page(rx_ring, rx_buffer); 2372 cleaned_count++; 2373 continue; 2374 } 2375 2376 size = (qword & I40E_RXD_QW1_LENGTH_PBUF_MASK) >> 2377 I40E_RXD_QW1_LENGTH_PBUF_SHIFT; 2378 if (!size) 2379 break; 2380 2381 i40e_trace(clean_rx_irq, rx_ring, rx_desc, skb); 2382 rx_buffer = i40e_get_rx_buffer(rx_ring, size); 2383 2384 /* retrieve a buffer from the ring */ 2385 if (!skb) { 2386 xdp.data = page_address(rx_buffer->page) + 2387 rx_buffer->page_offset; 2388 xdp.data_meta = xdp.data; 2389 xdp.data_hard_start = xdp.data - 2390 i40e_rx_offset(rx_ring); 2391 xdp.data_end = xdp.data + size; 2392 2393 skb = i40e_run_xdp(rx_ring, &xdp); 2394 } 2395 2396 if (IS_ERR(skb)) { 2397 unsigned int xdp_res = -PTR_ERR(skb); 2398 2399 if (xdp_res & (I40E_XDP_TX | I40E_XDP_REDIR)) { 2400 xdp_xmit |= xdp_res; 2401 i40e_rx_buffer_flip(rx_ring, rx_buffer, size); 2402 } else { 2403 rx_buffer->pagecnt_bias++; 2404 } 2405 total_rx_bytes += size; 2406 total_rx_packets++; 2407 } else if (skb) { 2408 i40e_add_rx_frag(rx_ring, rx_buffer, skb, size); 2409 } else if (ring_uses_build_skb(rx_ring)) { 2410 skb = i40e_build_skb(rx_ring, rx_buffer, &xdp); 2411 } else { 2412 skb = i40e_construct_skb(rx_ring, rx_buffer, &xdp); 2413 } 2414 2415 /* exit if we failed to retrieve a buffer */ 2416 if (!skb) { 2417 rx_ring->rx_stats.alloc_buff_failed++; 2418 rx_buffer->pagecnt_bias++; 2419 break; 2420 } 2421 2422 i40e_put_rx_buffer(rx_ring, rx_buffer); 2423 cleaned_count++; 2424 2425 if (i40e_is_non_eop(rx_ring, rx_desc, skb)) 2426 continue; 2427 2428 if (i40e_cleanup_headers(rx_ring, skb, rx_desc)) { 2429 skb = NULL; 2430 continue; 2431 } 2432 2433 /* probably a little skewed due to removing CRC */ 2434 total_rx_bytes += skb->len; 2435 2436 /* populate checksum, VLAN, and protocol */ 2437 i40e_process_skb_fields(rx_ring, rx_desc, skb); 2438 2439 i40e_trace(clean_rx_irq_rx, rx_ring, rx_desc, skb); 2440 napi_gro_receive(&rx_ring->q_vector->napi, skb); 2441 skb = NULL; 2442 2443 /* update budget accounting */ 2444 total_rx_packets++; 2445 } 2446 2447 i40e_finalize_xdp_rx(rx_ring, xdp_xmit); 2448 rx_ring->skb = skb; 2449 2450 i40e_update_rx_stats(rx_ring, total_rx_bytes, total_rx_packets); 2451 2452 /* guarantee a trip back through this routine if there was a failure */ 2453 return failure ? budget : (int)total_rx_packets; 2454 } 2455 2456 static inline u32 i40e_buildreg_itr(const int type, u16 itr) 2457 { 2458 u32 val; 2459 2460 /* We don't bother with setting the CLEARPBA bit as the data sheet 2461 * points out doing so is "meaningless since it was already 2462 * auto-cleared". The auto-clearing happens when the interrupt is 2463 * asserted. 2464 * 2465 * Hardware errata 28 for also indicates that writing to a 2466 * xxINT_DYN_CTLx CSR with INTENA_MSK (bit 31) set to 0 will clear 2467 * an event in the PBA anyway so we need to rely on the automask 2468 * to hold pending events for us until the interrupt is re-enabled 2469 * 2470 * The itr value is reported in microseconds, and the register 2471 * value is recorded in 2 microsecond units. For this reason we 2472 * only need to shift by the interval shift - 1 instead of the 2473 * full value. 2474 */ 2475 itr &= I40E_ITR_MASK; 2476 2477 val = I40E_PFINT_DYN_CTLN_INTENA_MASK | 2478 (type << I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT) | 2479 (itr << (I40E_PFINT_DYN_CTLN_INTERVAL_SHIFT - 1)); 2480 2481 return val; 2482 } 2483 2484 /* a small macro to shorten up some long lines */ 2485 #define INTREG I40E_PFINT_DYN_CTLN 2486 2487 /* The act of updating the ITR will cause it to immediately trigger. In order 2488 * to prevent this from throwing off adaptive update statistics we defer the 2489 * update so that it can only happen so often. So after either Tx or Rx are 2490 * updated we make the adaptive scheme wait until either the ITR completely 2491 * expires via the next_update expiration or we have been through at least 2492 * 3 interrupts. 2493 */ 2494 #define ITR_COUNTDOWN_START 3 2495 2496 /** 2497 * i40e_update_enable_itr - Update itr and re-enable MSIX interrupt 2498 * @vsi: the VSI we care about 2499 * @q_vector: q_vector for which itr is being updated and interrupt enabled 2500 * 2501 **/ 2502 static inline void i40e_update_enable_itr(struct i40e_vsi *vsi, 2503 struct i40e_q_vector *q_vector) 2504 { 2505 struct i40e_hw *hw = &vsi->back->hw; 2506 u32 intval; 2507 2508 /* If we don't have MSIX, then we only need to re-enable icr0 */ 2509 if (!(vsi->back->flags & I40E_FLAG_MSIX_ENABLED)) { 2510 i40e_irq_dynamic_enable_icr0(vsi->back); 2511 return; 2512 } 2513 2514 /* These will do nothing if dynamic updates are not enabled */ 2515 i40e_update_itr(q_vector, &q_vector->tx); 2516 i40e_update_itr(q_vector, &q_vector->rx); 2517 2518 /* This block of logic allows us to get away with only updating 2519 * one ITR value with each interrupt. The idea is to perform a 2520 * pseudo-lazy update with the following criteria. 2521 * 2522 * 1. Rx is given higher priority than Tx if both are in same state 2523 * 2. If we must reduce an ITR that is given highest priority. 2524 * 3. We then give priority to increasing ITR based on amount. 2525 */ 2526 if (q_vector->rx.target_itr < q_vector->rx.current_itr) { 2527 /* Rx ITR needs to be reduced, this is highest priority */ 2528 intval = i40e_buildreg_itr(I40E_RX_ITR, 2529 q_vector->rx.target_itr); 2530 q_vector->rx.current_itr = q_vector->rx.target_itr; 2531 q_vector->itr_countdown = ITR_COUNTDOWN_START; 2532 } else if ((q_vector->tx.target_itr < q_vector->tx.current_itr) || 2533 ((q_vector->rx.target_itr - q_vector->rx.current_itr) < 2534 (q_vector->tx.target_itr - q_vector->tx.current_itr))) { 2535 /* Tx ITR needs to be reduced, this is second priority 2536 * Tx ITR needs to be increased more than Rx, fourth priority 2537 */ 2538 intval = i40e_buildreg_itr(I40E_TX_ITR, 2539 q_vector->tx.target_itr); 2540 q_vector->tx.current_itr = q_vector->tx.target_itr; 2541 q_vector->itr_countdown = ITR_COUNTDOWN_START; 2542 } else if (q_vector->rx.current_itr != q_vector->rx.target_itr) { 2543 /* Rx ITR needs to be increased, third priority */ 2544 intval = i40e_buildreg_itr(I40E_RX_ITR, 2545 q_vector->rx.target_itr); 2546 q_vector->rx.current_itr = q_vector->rx.target_itr; 2547 q_vector->itr_countdown = ITR_COUNTDOWN_START; 2548 } else { 2549 /* No ITR update, lowest priority */ 2550 intval = i40e_buildreg_itr(I40E_ITR_NONE, 0); 2551 if (q_vector->itr_countdown) 2552 q_vector->itr_countdown--; 2553 } 2554 2555 if (!test_bit(__I40E_VSI_DOWN, vsi->state)) 2556 wr32(hw, INTREG(q_vector->reg_idx), intval); 2557 } 2558 2559 /** 2560 * i40e_napi_poll - NAPI polling Rx/Tx cleanup routine 2561 * @napi: napi struct with our devices info in it 2562 * @budget: amount of work driver is allowed to do this pass, in packets 2563 * 2564 * This function will clean all queues associated with a q_vector. 2565 * 2566 * Returns the amount of work done 2567 **/ 2568 int i40e_napi_poll(struct napi_struct *napi, int budget) 2569 { 2570 struct i40e_q_vector *q_vector = 2571 container_of(napi, struct i40e_q_vector, napi); 2572 struct i40e_vsi *vsi = q_vector->vsi; 2573 struct i40e_ring *ring; 2574 bool clean_complete = true; 2575 bool arm_wb = false; 2576 int budget_per_ring; 2577 int work_done = 0; 2578 2579 if (test_bit(__I40E_VSI_DOWN, vsi->state)) { 2580 napi_complete(napi); 2581 return 0; 2582 } 2583 2584 /* Since the actual Tx work is minimal, we can give the Tx a larger 2585 * budget and be more aggressive about cleaning up the Tx descriptors. 2586 */ 2587 i40e_for_each_ring(ring, q_vector->tx) { 2588 bool wd = ring->xsk_umem ? 2589 i40e_clean_xdp_tx_irq(vsi, ring, budget) : 2590 i40e_clean_tx_irq(vsi, ring, budget); 2591 2592 if (!wd) { 2593 clean_complete = false; 2594 continue; 2595 } 2596 arm_wb |= ring->arm_wb; 2597 ring->arm_wb = false; 2598 } 2599 2600 /* Handle case where we are called by netpoll with a budget of 0 */ 2601 if (budget <= 0) 2602 goto tx_only; 2603 2604 /* We attempt to distribute budget to each Rx queue fairly, but don't 2605 * allow the budget to go below 1 because that would exit polling early. 2606 */ 2607 budget_per_ring = max(budget/q_vector->num_ringpairs, 1); 2608 2609 i40e_for_each_ring(ring, q_vector->rx) { 2610 int cleaned = ring->xsk_umem ? 2611 i40e_clean_rx_irq_zc(ring, budget_per_ring) : 2612 i40e_clean_rx_irq(ring, budget_per_ring); 2613 2614 work_done += cleaned; 2615 /* if we clean as many as budgeted, we must not be done */ 2616 if (cleaned >= budget_per_ring) 2617 clean_complete = false; 2618 } 2619 2620 /* If work not completed, return budget and polling will return */ 2621 if (!clean_complete) { 2622 int cpu_id = smp_processor_id(); 2623 2624 /* It is possible that the interrupt affinity has changed but, 2625 * if the cpu is pegged at 100%, polling will never exit while 2626 * traffic continues and the interrupt will be stuck on this 2627 * cpu. We check to make sure affinity is correct before we 2628 * continue to poll, otherwise we must stop polling so the 2629 * interrupt can move to the correct cpu. 2630 */ 2631 if (!cpumask_test_cpu(cpu_id, &q_vector->affinity_mask)) { 2632 /* Tell napi that we are done polling */ 2633 napi_complete_done(napi, work_done); 2634 2635 /* Force an interrupt */ 2636 i40e_force_wb(vsi, q_vector); 2637 2638 /* Return budget-1 so that polling stops */ 2639 return budget - 1; 2640 } 2641 tx_only: 2642 if (arm_wb) { 2643 q_vector->tx.ring[0].tx_stats.tx_force_wb++; 2644 i40e_enable_wb_on_itr(vsi, q_vector); 2645 } 2646 return budget; 2647 } 2648 2649 if (vsi->back->flags & I40E_TXR_FLAGS_WB_ON_ITR) 2650 q_vector->arm_wb_state = false; 2651 2652 /* Exit the polling mode, but don't re-enable interrupts if stack might 2653 * poll us due to busy-polling 2654 */ 2655 if (likely(napi_complete_done(napi, work_done))) 2656 i40e_update_enable_itr(vsi, q_vector); 2657 2658 return min(work_done, budget - 1); 2659 } 2660 2661 /** 2662 * i40e_atr - Add a Flow Director ATR filter 2663 * @tx_ring: ring to add programming descriptor to 2664 * @skb: send buffer 2665 * @tx_flags: send tx flags 2666 **/ 2667 static void i40e_atr(struct i40e_ring *tx_ring, struct sk_buff *skb, 2668 u32 tx_flags) 2669 { 2670 struct i40e_filter_program_desc *fdir_desc; 2671 struct i40e_pf *pf = tx_ring->vsi->back; 2672 union { 2673 unsigned char *network; 2674 struct iphdr *ipv4; 2675 struct ipv6hdr *ipv6; 2676 } hdr; 2677 struct tcphdr *th; 2678 unsigned int hlen; 2679 u32 flex_ptype, dtype_cmd; 2680 int l4_proto; 2681 u16 i; 2682 2683 /* make sure ATR is enabled */ 2684 if (!(pf->flags & I40E_FLAG_FD_ATR_ENABLED)) 2685 return; 2686 2687 if (test_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state)) 2688 return; 2689 2690 /* if sampling is disabled do nothing */ 2691 if (!tx_ring->atr_sample_rate) 2692 return; 2693 2694 /* Currently only IPv4/IPv6 with TCP is supported */ 2695 if (!(tx_flags & (I40E_TX_FLAGS_IPV4 | I40E_TX_FLAGS_IPV6))) 2696 return; 2697 2698 /* snag network header to get L4 type and address */ 2699 hdr.network = (tx_flags & I40E_TX_FLAGS_UDP_TUNNEL) ? 2700 skb_inner_network_header(skb) : skb_network_header(skb); 2701 2702 /* Note: tx_flags gets modified to reflect inner protocols in 2703 * tx_enable_csum function if encap is enabled. 2704 */ 2705 if (tx_flags & I40E_TX_FLAGS_IPV4) { 2706 /* access ihl as u8 to avoid unaligned access on ia64 */ 2707 hlen = (hdr.network[0] & 0x0F) << 2; 2708 l4_proto = hdr.ipv4->protocol; 2709 } else { 2710 /* find the start of the innermost ipv6 header */ 2711 unsigned int inner_hlen = hdr.network - skb->data; 2712 unsigned int h_offset = inner_hlen; 2713 2714 /* this function updates h_offset to the end of the header */ 2715 l4_proto = 2716 ipv6_find_hdr(skb, &h_offset, IPPROTO_TCP, NULL, NULL); 2717 /* hlen will contain our best estimate of the tcp header */ 2718 hlen = h_offset - inner_hlen; 2719 } 2720 2721 if (l4_proto != IPPROTO_TCP) 2722 return; 2723 2724 th = (struct tcphdr *)(hdr.network + hlen); 2725 2726 /* Due to lack of space, no more new filters can be programmed */ 2727 if (th->syn && test_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state)) 2728 return; 2729 if (pf->flags & I40E_FLAG_HW_ATR_EVICT_ENABLED) { 2730 /* HW ATR eviction will take care of removing filters on FIN 2731 * and RST packets. 2732 */ 2733 if (th->fin || th->rst) 2734 return; 2735 } 2736 2737 tx_ring->atr_count++; 2738 2739 /* sample on all syn/fin/rst packets or once every atr sample rate */ 2740 if (!th->fin && 2741 !th->syn && 2742 !th->rst && 2743 (tx_ring->atr_count < tx_ring->atr_sample_rate)) 2744 return; 2745 2746 tx_ring->atr_count = 0; 2747 2748 /* grab the next descriptor */ 2749 i = tx_ring->next_to_use; 2750 fdir_desc = I40E_TX_FDIRDESC(tx_ring, i); 2751 2752 i++; 2753 tx_ring->next_to_use = (i < tx_ring->count) ? i : 0; 2754 2755 flex_ptype = (tx_ring->queue_index << I40E_TXD_FLTR_QW0_QINDEX_SHIFT) & 2756 I40E_TXD_FLTR_QW0_QINDEX_MASK; 2757 flex_ptype |= (tx_flags & I40E_TX_FLAGS_IPV4) ? 2758 (I40E_FILTER_PCTYPE_NONF_IPV4_TCP << 2759 I40E_TXD_FLTR_QW0_PCTYPE_SHIFT) : 2760 (I40E_FILTER_PCTYPE_NONF_IPV6_TCP << 2761 I40E_TXD_FLTR_QW0_PCTYPE_SHIFT); 2762 2763 flex_ptype |= tx_ring->vsi->id << I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT; 2764 2765 dtype_cmd = I40E_TX_DESC_DTYPE_FILTER_PROG; 2766 2767 dtype_cmd |= (th->fin || th->rst) ? 2768 (I40E_FILTER_PROGRAM_DESC_PCMD_REMOVE << 2769 I40E_TXD_FLTR_QW1_PCMD_SHIFT) : 2770 (I40E_FILTER_PROGRAM_DESC_PCMD_ADD_UPDATE << 2771 I40E_TXD_FLTR_QW1_PCMD_SHIFT); 2772 2773 dtype_cmd |= I40E_FILTER_PROGRAM_DESC_DEST_DIRECT_PACKET_QINDEX << 2774 I40E_TXD_FLTR_QW1_DEST_SHIFT; 2775 2776 dtype_cmd |= I40E_FILTER_PROGRAM_DESC_FD_STATUS_FD_ID << 2777 I40E_TXD_FLTR_QW1_FD_STATUS_SHIFT; 2778 2779 dtype_cmd |= I40E_TXD_FLTR_QW1_CNT_ENA_MASK; 2780 if (!(tx_flags & I40E_TX_FLAGS_UDP_TUNNEL)) 2781 dtype_cmd |= 2782 ((u32)I40E_FD_ATR_STAT_IDX(pf->hw.pf_id) << 2783 I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT) & 2784 I40E_TXD_FLTR_QW1_CNTINDEX_MASK; 2785 else 2786 dtype_cmd |= 2787 ((u32)I40E_FD_ATR_TUNNEL_STAT_IDX(pf->hw.pf_id) << 2788 I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT) & 2789 I40E_TXD_FLTR_QW1_CNTINDEX_MASK; 2790 2791 if (pf->flags & I40E_FLAG_HW_ATR_EVICT_ENABLED) 2792 dtype_cmd |= I40E_TXD_FLTR_QW1_ATR_MASK; 2793 2794 fdir_desc->qindex_flex_ptype_vsi = cpu_to_le32(flex_ptype); 2795 fdir_desc->rsvd = cpu_to_le32(0); 2796 fdir_desc->dtype_cmd_cntindex = cpu_to_le32(dtype_cmd); 2797 fdir_desc->fd_id = cpu_to_le32(0); 2798 } 2799 2800 /** 2801 * i40e_tx_prepare_vlan_flags - prepare generic TX VLAN tagging flags for HW 2802 * @skb: send buffer 2803 * @tx_ring: ring to send buffer on 2804 * @flags: the tx flags to be set 2805 * 2806 * Checks the skb and set up correspondingly several generic transmit flags 2807 * related to VLAN tagging for the HW, such as VLAN, DCB, etc. 2808 * 2809 * Returns error code indicate the frame should be dropped upon error and the 2810 * otherwise returns 0 to indicate the flags has been set properly. 2811 **/ 2812 static inline int i40e_tx_prepare_vlan_flags(struct sk_buff *skb, 2813 struct i40e_ring *tx_ring, 2814 u32 *flags) 2815 { 2816 __be16 protocol = skb->protocol; 2817 u32 tx_flags = 0; 2818 2819 if (protocol == htons(ETH_P_8021Q) && 2820 !(tx_ring->netdev->features & NETIF_F_HW_VLAN_CTAG_TX)) { 2821 /* When HW VLAN acceleration is turned off by the user the 2822 * stack sets the protocol to 8021q so that the driver 2823 * can take any steps required to support the SW only 2824 * VLAN handling. In our case the driver doesn't need 2825 * to take any further steps so just set the protocol 2826 * to the encapsulated ethertype. 2827 */ 2828 skb->protocol = vlan_get_protocol(skb); 2829 goto out; 2830 } 2831 2832 /* if we have a HW VLAN tag being added, default to the HW one */ 2833 if (skb_vlan_tag_present(skb)) { 2834 tx_flags |= skb_vlan_tag_get(skb) << I40E_TX_FLAGS_VLAN_SHIFT; 2835 tx_flags |= I40E_TX_FLAGS_HW_VLAN; 2836 /* else if it is a SW VLAN, check the next protocol and store the tag */ 2837 } else if (protocol == htons(ETH_P_8021Q)) { 2838 struct vlan_hdr *vhdr, _vhdr; 2839 2840 vhdr = skb_header_pointer(skb, ETH_HLEN, sizeof(_vhdr), &_vhdr); 2841 if (!vhdr) 2842 return -EINVAL; 2843 2844 protocol = vhdr->h_vlan_encapsulated_proto; 2845 tx_flags |= ntohs(vhdr->h_vlan_TCI) << I40E_TX_FLAGS_VLAN_SHIFT; 2846 tx_flags |= I40E_TX_FLAGS_SW_VLAN; 2847 } 2848 2849 if (!(tx_ring->vsi->back->flags & I40E_FLAG_DCB_ENABLED)) 2850 goto out; 2851 2852 /* Insert 802.1p priority into VLAN header */ 2853 if ((tx_flags & (I40E_TX_FLAGS_HW_VLAN | I40E_TX_FLAGS_SW_VLAN)) || 2854 (skb->priority != TC_PRIO_CONTROL)) { 2855 tx_flags &= ~I40E_TX_FLAGS_VLAN_PRIO_MASK; 2856 tx_flags |= (skb->priority & 0x7) << 2857 I40E_TX_FLAGS_VLAN_PRIO_SHIFT; 2858 if (tx_flags & I40E_TX_FLAGS_SW_VLAN) { 2859 struct vlan_ethhdr *vhdr; 2860 int rc; 2861 2862 rc = skb_cow_head(skb, 0); 2863 if (rc < 0) 2864 return rc; 2865 vhdr = (struct vlan_ethhdr *)skb->data; 2866 vhdr->h_vlan_TCI = htons(tx_flags >> 2867 I40E_TX_FLAGS_VLAN_SHIFT); 2868 } else { 2869 tx_flags |= I40E_TX_FLAGS_HW_VLAN; 2870 } 2871 } 2872 2873 out: 2874 *flags = tx_flags; 2875 return 0; 2876 } 2877 2878 /** 2879 * i40e_tso - set up the tso context descriptor 2880 * @first: pointer to first Tx buffer for xmit 2881 * @hdr_len: ptr to the size of the packet header 2882 * @cd_type_cmd_tso_mss: Quad Word 1 2883 * 2884 * Returns 0 if no TSO can happen, 1 if tso is going, or error 2885 **/ 2886 static int i40e_tso(struct i40e_tx_buffer *first, u8 *hdr_len, 2887 u64 *cd_type_cmd_tso_mss) 2888 { 2889 struct sk_buff *skb = first->skb; 2890 u64 cd_cmd, cd_tso_len, cd_mss; 2891 union { 2892 struct iphdr *v4; 2893 struct ipv6hdr *v6; 2894 unsigned char *hdr; 2895 } ip; 2896 union { 2897 struct tcphdr *tcp; 2898 struct udphdr *udp; 2899 unsigned char *hdr; 2900 } l4; 2901 u32 paylen, l4_offset; 2902 u16 gso_segs, gso_size; 2903 int err; 2904 2905 if (skb->ip_summed != CHECKSUM_PARTIAL) 2906 return 0; 2907 2908 if (!skb_is_gso(skb)) 2909 return 0; 2910 2911 err = skb_cow_head(skb, 0); 2912 if (err < 0) 2913 return err; 2914 2915 ip.hdr = skb_network_header(skb); 2916 l4.hdr = skb_transport_header(skb); 2917 2918 /* initialize outer IP header fields */ 2919 if (ip.v4->version == 4) { 2920 ip.v4->tot_len = 0; 2921 ip.v4->check = 0; 2922 } else { 2923 ip.v6->payload_len = 0; 2924 } 2925 2926 if (skb_shinfo(skb)->gso_type & (SKB_GSO_GRE | 2927 SKB_GSO_GRE_CSUM | 2928 SKB_GSO_IPXIP4 | 2929 SKB_GSO_IPXIP6 | 2930 SKB_GSO_UDP_TUNNEL | 2931 SKB_GSO_UDP_TUNNEL_CSUM)) { 2932 if (!(skb_shinfo(skb)->gso_type & SKB_GSO_PARTIAL) && 2933 (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL_CSUM)) { 2934 l4.udp->len = 0; 2935 2936 /* determine offset of outer transport header */ 2937 l4_offset = l4.hdr - skb->data; 2938 2939 /* remove payload length from outer checksum */ 2940 paylen = skb->len - l4_offset; 2941 csum_replace_by_diff(&l4.udp->check, 2942 (__force __wsum)htonl(paylen)); 2943 } 2944 2945 /* reset pointers to inner headers */ 2946 ip.hdr = skb_inner_network_header(skb); 2947 l4.hdr = skb_inner_transport_header(skb); 2948 2949 /* initialize inner IP header fields */ 2950 if (ip.v4->version == 4) { 2951 ip.v4->tot_len = 0; 2952 ip.v4->check = 0; 2953 } else { 2954 ip.v6->payload_len = 0; 2955 } 2956 } 2957 2958 /* determine offset of inner transport header */ 2959 l4_offset = l4.hdr - skb->data; 2960 2961 /* remove payload length from inner checksum */ 2962 paylen = skb->len - l4_offset; 2963 csum_replace_by_diff(&l4.tcp->check, (__force __wsum)htonl(paylen)); 2964 2965 /* compute length of segmentation header */ 2966 *hdr_len = (l4.tcp->doff * 4) + l4_offset; 2967 2968 /* pull values out of skb_shinfo */ 2969 gso_size = skb_shinfo(skb)->gso_size; 2970 gso_segs = skb_shinfo(skb)->gso_segs; 2971 2972 /* update GSO size and bytecount with header size */ 2973 first->gso_segs = gso_segs; 2974 first->bytecount += (first->gso_segs - 1) * *hdr_len; 2975 2976 /* find the field values */ 2977 cd_cmd = I40E_TX_CTX_DESC_TSO; 2978 cd_tso_len = skb->len - *hdr_len; 2979 cd_mss = gso_size; 2980 *cd_type_cmd_tso_mss |= (cd_cmd << I40E_TXD_CTX_QW1_CMD_SHIFT) | 2981 (cd_tso_len << I40E_TXD_CTX_QW1_TSO_LEN_SHIFT) | 2982 (cd_mss << I40E_TXD_CTX_QW1_MSS_SHIFT); 2983 return 1; 2984 } 2985 2986 /** 2987 * i40e_tsyn - set up the tsyn context descriptor 2988 * @tx_ring: ptr to the ring to send 2989 * @skb: ptr to the skb we're sending 2990 * @tx_flags: the collected send information 2991 * @cd_type_cmd_tso_mss: Quad Word 1 2992 * 2993 * Returns 0 if no Tx timestamp can happen and 1 if the timestamp will happen 2994 **/ 2995 static int i40e_tsyn(struct i40e_ring *tx_ring, struct sk_buff *skb, 2996 u32 tx_flags, u64 *cd_type_cmd_tso_mss) 2997 { 2998 struct i40e_pf *pf; 2999 3000 if (likely(!(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP))) 3001 return 0; 3002 3003 /* Tx timestamps cannot be sampled when doing TSO */ 3004 if (tx_flags & I40E_TX_FLAGS_TSO) 3005 return 0; 3006 3007 /* only timestamp the outbound packet if the user has requested it and 3008 * we are not already transmitting a packet to be timestamped 3009 */ 3010 pf = i40e_netdev_to_pf(tx_ring->netdev); 3011 if (!(pf->flags & I40E_FLAG_PTP)) 3012 return 0; 3013 3014 if (pf->ptp_tx && 3015 !test_and_set_bit_lock(__I40E_PTP_TX_IN_PROGRESS, pf->state)) { 3016 skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; 3017 pf->ptp_tx_start = jiffies; 3018 pf->ptp_tx_skb = skb_get(skb); 3019 } else { 3020 pf->tx_hwtstamp_skipped++; 3021 return 0; 3022 } 3023 3024 *cd_type_cmd_tso_mss |= (u64)I40E_TX_CTX_DESC_TSYN << 3025 I40E_TXD_CTX_QW1_CMD_SHIFT; 3026 3027 return 1; 3028 } 3029 3030 /** 3031 * i40e_tx_enable_csum - Enable Tx checksum offloads 3032 * @skb: send buffer 3033 * @tx_flags: pointer to Tx flags currently set 3034 * @td_cmd: Tx descriptor command bits to set 3035 * @td_offset: Tx descriptor header offsets to set 3036 * @tx_ring: Tx descriptor ring 3037 * @cd_tunneling: ptr to context desc bits 3038 **/ 3039 static int i40e_tx_enable_csum(struct sk_buff *skb, u32 *tx_flags, 3040 u32 *td_cmd, u32 *td_offset, 3041 struct i40e_ring *tx_ring, 3042 u32 *cd_tunneling) 3043 { 3044 union { 3045 struct iphdr *v4; 3046 struct ipv6hdr *v6; 3047 unsigned char *hdr; 3048 } ip; 3049 union { 3050 struct tcphdr *tcp; 3051 struct udphdr *udp; 3052 unsigned char *hdr; 3053 } l4; 3054 unsigned char *exthdr; 3055 u32 offset, cmd = 0; 3056 __be16 frag_off; 3057 u8 l4_proto = 0; 3058 3059 if (skb->ip_summed != CHECKSUM_PARTIAL) 3060 return 0; 3061 3062 ip.hdr = skb_network_header(skb); 3063 l4.hdr = skb_transport_header(skb); 3064 3065 /* compute outer L2 header size */ 3066 offset = ((ip.hdr - skb->data) / 2) << I40E_TX_DESC_LENGTH_MACLEN_SHIFT; 3067 3068 if (skb->encapsulation) { 3069 u32 tunnel = 0; 3070 /* define outer network header type */ 3071 if (*tx_flags & I40E_TX_FLAGS_IPV4) { 3072 tunnel |= (*tx_flags & I40E_TX_FLAGS_TSO) ? 3073 I40E_TX_CTX_EXT_IP_IPV4 : 3074 I40E_TX_CTX_EXT_IP_IPV4_NO_CSUM; 3075 3076 l4_proto = ip.v4->protocol; 3077 } else if (*tx_flags & I40E_TX_FLAGS_IPV6) { 3078 tunnel |= I40E_TX_CTX_EXT_IP_IPV6; 3079 3080 exthdr = ip.hdr + sizeof(*ip.v6); 3081 l4_proto = ip.v6->nexthdr; 3082 if (l4.hdr != exthdr) 3083 ipv6_skip_exthdr(skb, exthdr - skb->data, 3084 &l4_proto, &frag_off); 3085 } 3086 3087 /* define outer transport */ 3088 switch (l4_proto) { 3089 case IPPROTO_UDP: 3090 tunnel |= I40E_TXD_CTX_UDP_TUNNELING; 3091 *tx_flags |= I40E_TX_FLAGS_UDP_TUNNEL; 3092 break; 3093 case IPPROTO_GRE: 3094 tunnel |= I40E_TXD_CTX_GRE_TUNNELING; 3095 *tx_flags |= I40E_TX_FLAGS_UDP_TUNNEL; 3096 break; 3097 case IPPROTO_IPIP: 3098 case IPPROTO_IPV6: 3099 *tx_flags |= I40E_TX_FLAGS_UDP_TUNNEL; 3100 l4.hdr = skb_inner_network_header(skb); 3101 break; 3102 default: 3103 if (*tx_flags & I40E_TX_FLAGS_TSO) 3104 return -1; 3105 3106 skb_checksum_help(skb); 3107 return 0; 3108 } 3109 3110 /* compute outer L3 header size */ 3111 tunnel |= ((l4.hdr - ip.hdr) / 4) << 3112 I40E_TXD_CTX_QW0_EXT_IPLEN_SHIFT; 3113 3114 /* switch IP header pointer from outer to inner header */ 3115 ip.hdr = skb_inner_network_header(skb); 3116 3117 /* compute tunnel header size */ 3118 tunnel |= ((ip.hdr - l4.hdr) / 2) << 3119 I40E_TXD_CTX_QW0_NATLEN_SHIFT; 3120 3121 /* indicate if we need to offload outer UDP header */ 3122 if ((*tx_flags & I40E_TX_FLAGS_TSO) && 3123 !(skb_shinfo(skb)->gso_type & SKB_GSO_PARTIAL) && 3124 (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL_CSUM)) 3125 tunnel |= I40E_TXD_CTX_QW0_L4T_CS_MASK; 3126 3127 /* record tunnel offload values */ 3128 *cd_tunneling |= tunnel; 3129 3130 /* switch L4 header pointer from outer to inner */ 3131 l4.hdr = skb_inner_transport_header(skb); 3132 l4_proto = 0; 3133 3134 /* reset type as we transition from outer to inner headers */ 3135 *tx_flags &= ~(I40E_TX_FLAGS_IPV4 | I40E_TX_FLAGS_IPV6); 3136 if (ip.v4->version == 4) 3137 *tx_flags |= I40E_TX_FLAGS_IPV4; 3138 if (ip.v6->version == 6) 3139 *tx_flags |= I40E_TX_FLAGS_IPV6; 3140 } 3141 3142 /* Enable IP checksum offloads */ 3143 if (*tx_flags & I40E_TX_FLAGS_IPV4) { 3144 l4_proto = ip.v4->protocol; 3145 /* the stack computes the IP header already, the only time we 3146 * need the hardware to recompute it is in the case of TSO. 3147 */ 3148 cmd |= (*tx_flags & I40E_TX_FLAGS_TSO) ? 3149 I40E_TX_DESC_CMD_IIPT_IPV4_CSUM : 3150 I40E_TX_DESC_CMD_IIPT_IPV4; 3151 } else if (*tx_flags & I40E_TX_FLAGS_IPV6) { 3152 cmd |= I40E_TX_DESC_CMD_IIPT_IPV6; 3153 3154 exthdr = ip.hdr + sizeof(*ip.v6); 3155 l4_proto = ip.v6->nexthdr; 3156 if (l4.hdr != exthdr) 3157 ipv6_skip_exthdr(skb, exthdr - skb->data, 3158 &l4_proto, &frag_off); 3159 } 3160 3161 /* compute inner L3 header size */ 3162 offset |= ((l4.hdr - ip.hdr) / 4) << I40E_TX_DESC_LENGTH_IPLEN_SHIFT; 3163 3164 /* Enable L4 checksum offloads */ 3165 switch (l4_proto) { 3166 case IPPROTO_TCP: 3167 /* enable checksum offloads */ 3168 cmd |= I40E_TX_DESC_CMD_L4T_EOFT_TCP; 3169 offset |= l4.tcp->doff << I40E_TX_DESC_LENGTH_L4_FC_LEN_SHIFT; 3170 break; 3171 case IPPROTO_SCTP: 3172 /* enable SCTP checksum offload */ 3173 cmd |= I40E_TX_DESC_CMD_L4T_EOFT_SCTP; 3174 offset |= (sizeof(struct sctphdr) >> 2) << 3175 I40E_TX_DESC_LENGTH_L4_FC_LEN_SHIFT; 3176 break; 3177 case IPPROTO_UDP: 3178 /* enable UDP checksum offload */ 3179 cmd |= I40E_TX_DESC_CMD_L4T_EOFT_UDP; 3180 offset |= (sizeof(struct udphdr) >> 2) << 3181 I40E_TX_DESC_LENGTH_L4_FC_LEN_SHIFT; 3182 break; 3183 default: 3184 if (*tx_flags & I40E_TX_FLAGS_TSO) 3185 return -1; 3186 skb_checksum_help(skb); 3187 return 0; 3188 } 3189 3190 *td_cmd |= cmd; 3191 *td_offset |= offset; 3192 3193 return 1; 3194 } 3195 3196 /** 3197 * i40e_create_tx_ctx Build the Tx context descriptor 3198 * @tx_ring: ring to create the descriptor on 3199 * @cd_type_cmd_tso_mss: Quad Word 1 3200 * @cd_tunneling: Quad Word 0 - bits 0-31 3201 * @cd_l2tag2: Quad Word 0 - bits 32-63 3202 **/ 3203 static void i40e_create_tx_ctx(struct i40e_ring *tx_ring, 3204 const u64 cd_type_cmd_tso_mss, 3205 const u32 cd_tunneling, const u32 cd_l2tag2) 3206 { 3207 struct i40e_tx_context_desc *context_desc; 3208 int i = tx_ring->next_to_use; 3209 3210 if ((cd_type_cmd_tso_mss == I40E_TX_DESC_DTYPE_CONTEXT) && 3211 !cd_tunneling && !cd_l2tag2) 3212 return; 3213 3214 /* grab the next descriptor */ 3215 context_desc = I40E_TX_CTXTDESC(tx_ring, i); 3216 3217 i++; 3218 tx_ring->next_to_use = (i < tx_ring->count) ? i : 0; 3219 3220 /* cpu_to_le32 and assign to struct fields */ 3221 context_desc->tunneling_params = cpu_to_le32(cd_tunneling); 3222 context_desc->l2tag2 = cpu_to_le16(cd_l2tag2); 3223 context_desc->rsvd = cpu_to_le16(0); 3224 context_desc->type_cmd_tso_mss = cpu_to_le64(cd_type_cmd_tso_mss); 3225 } 3226 3227 /** 3228 * __i40e_maybe_stop_tx - 2nd level check for tx stop conditions 3229 * @tx_ring: the ring to be checked 3230 * @size: the size buffer we want to assure is available 3231 * 3232 * Returns -EBUSY if a stop is needed, else 0 3233 **/ 3234 int __i40e_maybe_stop_tx(struct i40e_ring *tx_ring, int size) 3235 { 3236 netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index); 3237 /* Memory barrier before checking head and tail */ 3238 smp_mb(); 3239 3240 /* Check again in a case another CPU has just made room available. */ 3241 if (likely(I40E_DESC_UNUSED(tx_ring) < size)) 3242 return -EBUSY; 3243 3244 /* A reprieve! - use start_queue because it doesn't call schedule */ 3245 netif_start_subqueue(tx_ring->netdev, tx_ring->queue_index); 3246 ++tx_ring->tx_stats.restart_queue; 3247 return 0; 3248 } 3249 3250 /** 3251 * __i40e_chk_linearize - Check if there are more than 8 buffers per packet 3252 * @skb: send buffer 3253 * 3254 * Note: Our HW can't DMA more than 8 buffers to build a packet on the wire 3255 * and so we need to figure out the cases where we need to linearize the skb. 3256 * 3257 * For TSO we need to count the TSO header and segment payload separately. 3258 * As such we need to check cases where we have 7 fragments or more as we 3259 * can potentially require 9 DMA transactions, 1 for the TSO header, 1 for 3260 * the segment payload in the first descriptor, and another 7 for the 3261 * fragments. 3262 **/ 3263 bool __i40e_chk_linearize(struct sk_buff *skb) 3264 { 3265 const skb_frag_t *frag, *stale; 3266 int nr_frags, sum; 3267 3268 /* no need to check if number of frags is less than 7 */ 3269 nr_frags = skb_shinfo(skb)->nr_frags; 3270 if (nr_frags < (I40E_MAX_BUFFER_TXD - 1)) 3271 return false; 3272 3273 /* We need to walk through the list and validate that each group 3274 * of 6 fragments totals at least gso_size. 3275 */ 3276 nr_frags -= I40E_MAX_BUFFER_TXD - 2; 3277 frag = &skb_shinfo(skb)->frags[0]; 3278 3279 /* Initialize size to the negative value of gso_size minus 1. We 3280 * use this as the worst case scenerio in which the frag ahead 3281 * of us only provides one byte which is why we are limited to 6 3282 * descriptors for a single transmit as the header and previous 3283 * fragment are already consuming 2 descriptors. 3284 */ 3285 sum = 1 - skb_shinfo(skb)->gso_size; 3286 3287 /* Add size of frags 0 through 4 to create our initial sum */ 3288 sum += skb_frag_size(frag++); 3289 sum += skb_frag_size(frag++); 3290 sum += skb_frag_size(frag++); 3291 sum += skb_frag_size(frag++); 3292 sum += skb_frag_size(frag++); 3293 3294 /* Walk through fragments adding latest fragment, testing it, and 3295 * then removing stale fragments from the sum. 3296 */ 3297 for (stale = &skb_shinfo(skb)->frags[0];; stale++) { 3298 int stale_size = skb_frag_size(stale); 3299 3300 sum += skb_frag_size(frag++); 3301 3302 /* The stale fragment may present us with a smaller 3303 * descriptor than the actual fragment size. To account 3304 * for that we need to remove all the data on the front and 3305 * figure out what the remainder would be in the last 3306 * descriptor associated with the fragment. 3307 */ 3308 if (stale_size > I40E_MAX_DATA_PER_TXD) { 3309 int align_pad = -(skb_frag_off(stale)) & 3310 (I40E_MAX_READ_REQ_SIZE - 1); 3311 3312 sum -= align_pad; 3313 stale_size -= align_pad; 3314 3315 do { 3316 sum -= I40E_MAX_DATA_PER_TXD_ALIGNED; 3317 stale_size -= I40E_MAX_DATA_PER_TXD_ALIGNED; 3318 } while (stale_size > I40E_MAX_DATA_PER_TXD); 3319 } 3320 3321 /* if sum is negative we failed to make sufficient progress */ 3322 if (sum < 0) 3323 return true; 3324 3325 if (!nr_frags--) 3326 break; 3327 3328 sum -= stale_size; 3329 } 3330 3331 return false; 3332 } 3333 3334 /** 3335 * i40e_tx_map - Build the Tx descriptor 3336 * @tx_ring: ring to send buffer on 3337 * @skb: send buffer 3338 * @first: first buffer info buffer to use 3339 * @tx_flags: collected send information 3340 * @hdr_len: size of the packet header 3341 * @td_cmd: the command field in the descriptor 3342 * @td_offset: offset for checksum or crc 3343 * 3344 * Returns 0 on success, -1 on failure to DMA 3345 **/ 3346 static inline int i40e_tx_map(struct i40e_ring *tx_ring, struct sk_buff *skb, 3347 struct i40e_tx_buffer *first, u32 tx_flags, 3348 const u8 hdr_len, u32 td_cmd, u32 td_offset) 3349 { 3350 unsigned int data_len = skb->data_len; 3351 unsigned int size = skb_headlen(skb); 3352 skb_frag_t *frag; 3353 struct i40e_tx_buffer *tx_bi; 3354 struct i40e_tx_desc *tx_desc; 3355 u16 i = tx_ring->next_to_use; 3356 u32 td_tag = 0; 3357 dma_addr_t dma; 3358 u16 desc_count = 1; 3359 3360 if (tx_flags & I40E_TX_FLAGS_HW_VLAN) { 3361 td_cmd |= I40E_TX_DESC_CMD_IL2TAG1; 3362 td_tag = (tx_flags & I40E_TX_FLAGS_VLAN_MASK) >> 3363 I40E_TX_FLAGS_VLAN_SHIFT; 3364 } 3365 3366 first->tx_flags = tx_flags; 3367 3368 dma = dma_map_single(tx_ring->dev, skb->data, size, DMA_TO_DEVICE); 3369 3370 tx_desc = I40E_TX_DESC(tx_ring, i); 3371 tx_bi = first; 3372 3373 for (frag = &skb_shinfo(skb)->frags[0];; frag++) { 3374 unsigned int max_data = I40E_MAX_DATA_PER_TXD_ALIGNED; 3375 3376 if (dma_mapping_error(tx_ring->dev, dma)) 3377 goto dma_error; 3378 3379 /* record length, and DMA address */ 3380 dma_unmap_len_set(tx_bi, len, size); 3381 dma_unmap_addr_set(tx_bi, dma, dma); 3382 3383 /* align size to end of page */ 3384 max_data += -dma & (I40E_MAX_READ_REQ_SIZE - 1); 3385 tx_desc->buffer_addr = cpu_to_le64(dma); 3386 3387 while (unlikely(size > I40E_MAX_DATA_PER_TXD)) { 3388 tx_desc->cmd_type_offset_bsz = 3389 build_ctob(td_cmd, td_offset, 3390 max_data, td_tag); 3391 3392 tx_desc++; 3393 i++; 3394 desc_count++; 3395 3396 if (i == tx_ring->count) { 3397 tx_desc = I40E_TX_DESC(tx_ring, 0); 3398 i = 0; 3399 } 3400 3401 dma += max_data; 3402 size -= max_data; 3403 3404 max_data = I40E_MAX_DATA_PER_TXD_ALIGNED; 3405 tx_desc->buffer_addr = cpu_to_le64(dma); 3406 } 3407 3408 if (likely(!data_len)) 3409 break; 3410 3411 tx_desc->cmd_type_offset_bsz = build_ctob(td_cmd, td_offset, 3412 size, td_tag); 3413 3414 tx_desc++; 3415 i++; 3416 desc_count++; 3417 3418 if (i == tx_ring->count) { 3419 tx_desc = I40E_TX_DESC(tx_ring, 0); 3420 i = 0; 3421 } 3422 3423 size = skb_frag_size(frag); 3424 data_len -= size; 3425 3426 dma = skb_frag_dma_map(tx_ring->dev, frag, 0, size, 3427 DMA_TO_DEVICE); 3428 3429 tx_bi = &tx_ring->tx_bi[i]; 3430 } 3431 3432 netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount); 3433 3434 i++; 3435 if (i == tx_ring->count) 3436 i = 0; 3437 3438 tx_ring->next_to_use = i; 3439 3440 i40e_maybe_stop_tx(tx_ring, DESC_NEEDED); 3441 3442 /* write last descriptor with EOP bit */ 3443 td_cmd |= I40E_TX_DESC_CMD_EOP; 3444 3445 /* We OR these values together to check both against 4 (WB_STRIDE) 3446 * below. This is safe since we don't re-use desc_count afterwards. 3447 */ 3448 desc_count |= ++tx_ring->packet_stride; 3449 3450 if (desc_count >= WB_STRIDE) { 3451 /* write last descriptor with RS bit set */ 3452 td_cmd |= I40E_TX_DESC_CMD_RS; 3453 tx_ring->packet_stride = 0; 3454 } 3455 3456 tx_desc->cmd_type_offset_bsz = 3457 build_ctob(td_cmd, td_offset, size, td_tag); 3458 3459 skb_tx_timestamp(skb); 3460 3461 /* Force memory writes to complete before letting h/w know there 3462 * are new descriptors to fetch. 3463 * 3464 * We also use this memory barrier to make certain all of the 3465 * status bits have been updated before next_to_watch is written. 3466 */ 3467 wmb(); 3468 3469 /* set next_to_watch value indicating a packet is present */ 3470 first->next_to_watch = tx_desc; 3471 3472 /* notify HW of packet */ 3473 if (netif_xmit_stopped(txring_txq(tx_ring)) || !netdev_xmit_more()) { 3474 writel(i, tx_ring->tail); 3475 } 3476 3477 return 0; 3478 3479 dma_error: 3480 dev_info(tx_ring->dev, "TX DMA map failed\n"); 3481 3482 /* clear dma mappings for failed tx_bi map */ 3483 for (;;) { 3484 tx_bi = &tx_ring->tx_bi[i]; 3485 i40e_unmap_and_free_tx_resource(tx_ring, tx_bi); 3486 if (tx_bi == first) 3487 break; 3488 if (i == 0) 3489 i = tx_ring->count; 3490 i--; 3491 } 3492 3493 tx_ring->next_to_use = i; 3494 3495 return -1; 3496 } 3497 3498 /** 3499 * i40e_xmit_xdp_ring - transmits an XDP buffer to an XDP Tx ring 3500 * @xdp: data to transmit 3501 * @xdp_ring: XDP Tx ring 3502 **/ 3503 static int i40e_xmit_xdp_ring(struct xdp_frame *xdpf, 3504 struct i40e_ring *xdp_ring) 3505 { 3506 u16 i = xdp_ring->next_to_use; 3507 struct i40e_tx_buffer *tx_bi; 3508 struct i40e_tx_desc *tx_desc; 3509 void *data = xdpf->data; 3510 u32 size = xdpf->len; 3511 dma_addr_t dma; 3512 3513 if (!unlikely(I40E_DESC_UNUSED(xdp_ring))) { 3514 xdp_ring->tx_stats.tx_busy++; 3515 return I40E_XDP_CONSUMED; 3516 } 3517 dma = dma_map_single(xdp_ring->dev, data, size, DMA_TO_DEVICE); 3518 if (dma_mapping_error(xdp_ring->dev, dma)) 3519 return I40E_XDP_CONSUMED; 3520 3521 tx_bi = &xdp_ring->tx_bi[i]; 3522 tx_bi->bytecount = size; 3523 tx_bi->gso_segs = 1; 3524 tx_bi->xdpf = xdpf; 3525 3526 /* record length, and DMA address */ 3527 dma_unmap_len_set(tx_bi, len, size); 3528 dma_unmap_addr_set(tx_bi, dma, dma); 3529 3530 tx_desc = I40E_TX_DESC(xdp_ring, i); 3531 tx_desc->buffer_addr = cpu_to_le64(dma); 3532 tx_desc->cmd_type_offset_bsz = build_ctob(I40E_TX_DESC_CMD_ICRC 3533 | I40E_TXD_CMD, 3534 0, size, 0); 3535 3536 /* Make certain all of the status bits have been updated 3537 * before next_to_watch is written. 3538 */ 3539 smp_wmb(); 3540 3541 i++; 3542 if (i == xdp_ring->count) 3543 i = 0; 3544 3545 tx_bi->next_to_watch = tx_desc; 3546 xdp_ring->next_to_use = i; 3547 3548 return I40E_XDP_TX; 3549 } 3550 3551 /** 3552 * i40e_xmit_frame_ring - Sends buffer on Tx ring 3553 * @skb: send buffer 3554 * @tx_ring: ring to send buffer on 3555 * 3556 * Returns NETDEV_TX_OK if sent, else an error code 3557 **/ 3558 static netdev_tx_t i40e_xmit_frame_ring(struct sk_buff *skb, 3559 struct i40e_ring *tx_ring) 3560 { 3561 u64 cd_type_cmd_tso_mss = I40E_TX_DESC_DTYPE_CONTEXT; 3562 u32 cd_tunneling = 0, cd_l2tag2 = 0; 3563 struct i40e_tx_buffer *first; 3564 u32 td_offset = 0; 3565 u32 tx_flags = 0; 3566 __be16 protocol; 3567 u32 td_cmd = 0; 3568 u8 hdr_len = 0; 3569 int tso, count; 3570 int tsyn; 3571 3572 /* prefetch the data, we'll need it later */ 3573 prefetch(skb->data); 3574 3575 i40e_trace(xmit_frame_ring, skb, tx_ring); 3576 3577 count = i40e_xmit_descriptor_count(skb); 3578 if (i40e_chk_linearize(skb, count)) { 3579 if (__skb_linearize(skb)) { 3580 dev_kfree_skb_any(skb); 3581 return NETDEV_TX_OK; 3582 } 3583 count = i40e_txd_use_count(skb->len); 3584 tx_ring->tx_stats.tx_linearize++; 3585 } 3586 3587 /* need: 1 descriptor per page * PAGE_SIZE/I40E_MAX_DATA_PER_TXD, 3588 * + 1 desc for skb_head_len/I40E_MAX_DATA_PER_TXD, 3589 * + 4 desc gap to avoid the cache line where head is, 3590 * + 1 desc for context descriptor, 3591 * otherwise try next time 3592 */ 3593 if (i40e_maybe_stop_tx(tx_ring, count + 4 + 1)) { 3594 tx_ring->tx_stats.tx_busy++; 3595 return NETDEV_TX_BUSY; 3596 } 3597 3598 /* record the location of the first descriptor for this packet */ 3599 first = &tx_ring->tx_bi[tx_ring->next_to_use]; 3600 first->skb = skb; 3601 first->bytecount = skb->len; 3602 first->gso_segs = 1; 3603 3604 /* prepare the xmit flags */ 3605 if (i40e_tx_prepare_vlan_flags(skb, tx_ring, &tx_flags)) 3606 goto out_drop; 3607 3608 /* obtain protocol of skb */ 3609 protocol = vlan_get_protocol(skb); 3610 3611 /* setup IPv4/IPv6 offloads */ 3612 if (protocol == htons(ETH_P_IP)) 3613 tx_flags |= I40E_TX_FLAGS_IPV4; 3614 else if (protocol == htons(ETH_P_IPV6)) 3615 tx_flags |= I40E_TX_FLAGS_IPV6; 3616 3617 tso = i40e_tso(first, &hdr_len, &cd_type_cmd_tso_mss); 3618 3619 if (tso < 0) 3620 goto out_drop; 3621 else if (tso) 3622 tx_flags |= I40E_TX_FLAGS_TSO; 3623 3624 /* Always offload the checksum, since it's in the data descriptor */ 3625 tso = i40e_tx_enable_csum(skb, &tx_flags, &td_cmd, &td_offset, 3626 tx_ring, &cd_tunneling); 3627 if (tso < 0) 3628 goto out_drop; 3629 3630 tsyn = i40e_tsyn(tx_ring, skb, tx_flags, &cd_type_cmd_tso_mss); 3631 3632 if (tsyn) 3633 tx_flags |= I40E_TX_FLAGS_TSYN; 3634 3635 /* always enable CRC insertion offload */ 3636 td_cmd |= I40E_TX_DESC_CMD_ICRC; 3637 3638 i40e_create_tx_ctx(tx_ring, cd_type_cmd_tso_mss, 3639 cd_tunneling, cd_l2tag2); 3640 3641 /* Add Flow Director ATR if it's enabled. 3642 * 3643 * NOTE: this must always be directly before the data descriptor. 3644 */ 3645 i40e_atr(tx_ring, skb, tx_flags); 3646 3647 if (i40e_tx_map(tx_ring, skb, first, tx_flags, hdr_len, 3648 td_cmd, td_offset)) 3649 goto cleanup_tx_tstamp; 3650 3651 return NETDEV_TX_OK; 3652 3653 out_drop: 3654 i40e_trace(xmit_frame_ring_drop, first->skb, tx_ring); 3655 dev_kfree_skb_any(first->skb); 3656 first->skb = NULL; 3657 cleanup_tx_tstamp: 3658 if (unlikely(tx_flags & I40E_TX_FLAGS_TSYN)) { 3659 struct i40e_pf *pf = i40e_netdev_to_pf(tx_ring->netdev); 3660 3661 dev_kfree_skb_any(pf->ptp_tx_skb); 3662 pf->ptp_tx_skb = NULL; 3663 clear_bit_unlock(__I40E_PTP_TX_IN_PROGRESS, pf->state); 3664 } 3665 3666 return NETDEV_TX_OK; 3667 } 3668 3669 /** 3670 * i40e_lan_xmit_frame - Selects the correct VSI and Tx queue to send buffer 3671 * @skb: send buffer 3672 * @netdev: network interface device structure 3673 * 3674 * Returns NETDEV_TX_OK if sent, else an error code 3675 **/ 3676 netdev_tx_t i40e_lan_xmit_frame(struct sk_buff *skb, struct net_device *netdev) 3677 { 3678 struct i40e_netdev_priv *np = netdev_priv(netdev); 3679 struct i40e_vsi *vsi = np->vsi; 3680 struct i40e_ring *tx_ring = vsi->tx_rings[skb->queue_mapping]; 3681 3682 /* hardware can't handle really short frames, hardware padding works 3683 * beyond this point 3684 */ 3685 if (skb_put_padto(skb, I40E_MIN_TX_LEN)) 3686 return NETDEV_TX_OK; 3687 3688 return i40e_xmit_frame_ring(skb, tx_ring); 3689 } 3690 3691 /** 3692 * i40e_xdp_xmit - Implements ndo_xdp_xmit 3693 * @dev: netdev 3694 * @xdp: XDP buffer 3695 * 3696 * Returns number of frames successfully sent. Frames that fail are 3697 * free'ed via XDP return API. 3698 * 3699 * For error cases, a negative errno code is returned and no-frames 3700 * are transmitted (caller must handle freeing frames). 3701 **/ 3702 int i40e_xdp_xmit(struct net_device *dev, int n, struct xdp_frame **frames, 3703 u32 flags) 3704 { 3705 struct i40e_netdev_priv *np = netdev_priv(dev); 3706 unsigned int queue_index = smp_processor_id(); 3707 struct i40e_vsi *vsi = np->vsi; 3708 struct i40e_pf *pf = vsi->back; 3709 struct i40e_ring *xdp_ring; 3710 int drops = 0; 3711 int i; 3712 3713 if (test_bit(__I40E_VSI_DOWN, vsi->state)) 3714 return -ENETDOWN; 3715 3716 if (!i40e_enabled_xdp_vsi(vsi) || queue_index >= vsi->num_queue_pairs || 3717 test_bit(__I40E_CONFIG_BUSY, pf->state)) 3718 return -ENXIO; 3719 3720 if (unlikely(flags & ~XDP_XMIT_FLAGS_MASK)) 3721 return -EINVAL; 3722 3723 xdp_ring = vsi->xdp_rings[queue_index]; 3724 3725 for (i = 0; i < n; i++) { 3726 struct xdp_frame *xdpf = frames[i]; 3727 int err; 3728 3729 err = i40e_xmit_xdp_ring(xdpf, xdp_ring); 3730 if (err != I40E_XDP_TX) { 3731 xdp_return_frame_rx_napi(xdpf); 3732 drops++; 3733 } 3734 } 3735 3736 if (unlikely(flags & XDP_XMIT_FLUSH)) 3737 i40e_xdp_ring_update_tail(xdp_ring); 3738 3739 return n - drops; 3740 } 3741