1 // SPDX-License-Identifier: GPL-2.0 2 /* Copyright(c) 2013 - 2018 Intel Corporation. */ 3 4 #include <linux/prefetch.h> 5 #include <linux/bpf_trace.h> 6 #include <net/xdp.h> 7 #include "i40e.h" 8 #include "i40e_trace.h" 9 #include "i40e_prototype.h" 10 #include "i40e_txrx_common.h" 11 #include "i40e_xsk.h" 12 13 #define I40E_TXD_CMD (I40E_TX_DESC_CMD_EOP | I40E_TX_DESC_CMD_RS) 14 /** 15 * i40e_fdir - Generate a Flow Director descriptor based on fdata 16 * @tx_ring: Tx ring to send buffer on 17 * @fdata: Flow director filter data 18 * @add: Indicate if we are adding a rule or deleting one 19 * 20 **/ 21 static void i40e_fdir(struct i40e_ring *tx_ring, 22 struct i40e_fdir_filter *fdata, bool add) 23 { 24 struct i40e_filter_program_desc *fdir_desc; 25 struct i40e_pf *pf = tx_ring->vsi->back; 26 u32 flex_ptype, dtype_cmd; 27 u16 i; 28 29 /* grab the next descriptor */ 30 i = tx_ring->next_to_use; 31 fdir_desc = I40E_TX_FDIRDESC(tx_ring, i); 32 33 i++; 34 tx_ring->next_to_use = (i < tx_ring->count) ? i : 0; 35 36 flex_ptype = I40E_TXD_FLTR_QW0_QINDEX_MASK & 37 (fdata->q_index << I40E_TXD_FLTR_QW0_QINDEX_SHIFT); 38 39 flex_ptype |= I40E_TXD_FLTR_QW0_FLEXOFF_MASK & 40 (fdata->flex_off << I40E_TXD_FLTR_QW0_FLEXOFF_SHIFT); 41 42 flex_ptype |= I40E_TXD_FLTR_QW0_PCTYPE_MASK & 43 (fdata->pctype << I40E_TXD_FLTR_QW0_PCTYPE_SHIFT); 44 45 flex_ptype |= I40E_TXD_FLTR_QW0_PCTYPE_MASK & 46 (fdata->flex_offset << I40E_TXD_FLTR_QW0_FLEXOFF_SHIFT); 47 48 /* Use LAN VSI Id if not programmed by user */ 49 flex_ptype |= I40E_TXD_FLTR_QW0_DEST_VSI_MASK & 50 ((u32)(fdata->dest_vsi ? : pf->vsi[pf->lan_vsi]->id) << 51 I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT); 52 53 dtype_cmd = I40E_TX_DESC_DTYPE_FILTER_PROG; 54 55 dtype_cmd |= add ? 56 I40E_FILTER_PROGRAM_DESC_PCMD_ADD_UPDATE << 57 I40E_TXD_FLTR_QW1_PCMD_SHIFT : 58 I40E_FILTER_PROGRAM_DESC_PCMD_REMOVE << 59 I40E_TXD_FLTR_QW1_PCMD_SHIFT; 60 61 dtype_cmd |= I40E_TXD_FLTR_QW1_DEST_MASK & 62 (fdata->dest_ctl << I40E_TXD_FLTR_QW1_DEST_SHIFT); 63 64 dtype_cmd |= I40E_TXD_FLTR_QW1_FD_STATUS_MASK & 65 (fdata->fd_status << I40E_TXD_FLTR_QW1_FD_STATUS_SHIFT); 66 67 if (fdata->cnt_index) { 68 dtype_cmd |= I40E_TXD_FLTR_QW1_CNT_ENA_MASK; 69 dtype_cmd |= I40E_TXD_FLTR_QW1_CNTINDEX_MASK & 70 ((u32)fdata->cnt_index << 71 I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT); 72 } 73 74 fdir_desc->qindex_flex_ptype_vsi = cpu_to_le32(flex_ptype); 75 fdir_desc->rsvd = cpu_to_le32(0); 76 fdir_desc->dtype_cmd_cntindex = cpu_to_le32(dtype_cmd); 77 fdir_desc->fd_id = cpu_to_le32(fdata->fd_id); 78 } 79 80 #define I40E_FD_CLEAN_DELAY 10 81 /** 82 * i40e_program_fdir_filter - Program a Flow Director filter 83 * @fdir_data: Packet data that will be filter parameters 84 * @raw_packet: the pre-allocated packet buffer for FDir 85 * @pf: The PF pointer 86 * @add: True for add/update, False for remove 87 **/ 88 static int i40e_program_fdir_filter(struct i40e_fdir_filter *fdir_data, 89 u8 *raw_packet, struct i40e_pf *pf, 90 bool add) 91 { 92 struct i40e_tx_buffer *tx_buf, *first; 93 struct i40e_tx_desc *tx_desc; 94 struct i40e_ring *tx_ring; 95 struct i40e_vsi *vsi; 96 struct device *dev; 97 dma_addr_t dma; 98 u32 td_cmd = 0; 99 u16 i; 100 101 /* find existing FDIR VSI */ 102 vsi = i40e_find_vsi_by_type(pf, I40E_VSI_FDIR); 103 if (!vsi) 104 return -ENOENT; 105 106 tx_ring = vsi->tx_rings[0]; 107 dev = tx_ring->dev; 108 109 /* we need two descriptors to add/del a filter and we can wait */ 110 for (i = I40E_FD_CLEAN_DELAY; I40E_DESC_UNUSED(tx_ring) < 2; i--) { 111 if (!i) 112 return -EAGAIN; 113 msleep_interruptible(1); 114 } 115 116 dma = dma_map_single(dev, raw_packet, 117 I40E_FDIR_MAX_RAW_PACKET_SIZE, DMA_TO_DEVICE); 118 if (dma_mapping_error(dev, dma)) 119 goto dma_fail; 120 121 /* grab the next descriptor */ 122 i = tx_ring->next_to_use; 123 first = &tx_ring->tx_bi[i]; 124 i40e_fdir(tx_ring, fdir_data, add); 125 126 /* Now program a dummy descriptor */ 127 i = tx_ring->next_to_use; 128 tx_desc = I40E_TX_DESC(tx_ring, i); 129 tx_buf = &tx_ring->tx_bi[i]; 130 131 tx_ring->next_to_use = ((i + 1) < tx_ring->count) ? i + 1 : 0; 132 133 memset(tx_buf, 0, sizeof(struct i40e_tx_buffer)); 134 135 /* record length, and DMA address */ 136 dma_unmap_len_set(tx_buf, len, I40E_FDIR_MAX_RAW_PACKET_SIZE); 137 dma_unmap_addr_set(tx_buf, dma, dma); 138 139 tx_desc->buffer_addr = cpu_to_le64(dma); 140 td_cmd = I40E_TXD_CMD | I40E_TX_DESC_CMD_DUMMY; 141 142 tx_buf->tx_flags = I40E_TX_FLAGS_FD_SB; 143 tx_buf->raw_buf = (void *)raw_packet; 144 145 tx_desc->cmd_type_offset_bsz = 146 build_ctob(td_cmd, 0, I40E_FDIR_MAX_RAW_PACKET_SIZE, 0); 147 148 /* Force memory writes to complete before letting h/w 149 * know there are new descriptors to fetch. 150 */ 151 wmb(); 152 153 /* Mark the data descriptor to be watched */ 154 first->next_to_watch = tx_desc; 155 156 writel(tx_ring->next_to_use, tx_ring->tail); 157 return 0; 158 159 dma_fail: 160 return -1; 161 } 162 163 #define IP_HEADER_OFFSET 14 164 #define I40E_UDPIP_DUMMY_PACKET_LEN 42 165 /** 166 * i40e_add_del_fdir_udpv4 - Add/Remove UDPv4 filters 167 * @vsi: pointer to the targeted VSI 168 * @fd_data: the flow director data required for the FDir descriptor 169 * @add: true adds a filter, false removes it 170 * 171 * Returns 0 if the filters were successfully added or removed 172 **/ 173 static int i40e_add_del_fdir_udpv4(struct i40e_vsi *vsi, 174 struct i40e_fdir_filter *fd_data, 175 bool add) 176 { 177 struct i40e_pf *pf = vsi->back; 178 struct udphdr *udp; 179 struct iphdr *ip; 180 u8 *raw_packet; 181 int ret; 182 static char packet[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x08, 0, 183 0x45, 0, 0, 0x1c, 0, 0, 0x40, 0, 0x40, 0x11, 0, 0, 0, 0, 0, 0, 184 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; 185 186 raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL); 187 if (!raw_packet) 188 return -ENOMEM; 189 memcpy(raw_packet, packet, I40E_UDPIP_DUMMY_PACKET_LEN); 190 191 ip = (struct iphdr *)(raw_packet + IP_HEADER_OFFSET); 192 udp = (struct udphdr *)(raw_packet + IP_HEADER_OFFSET 193 + sizeof(struct iphdr)); 194 195 ip->daddr = fd_data->dst_ip; 196 udp->dest = fd_data->dst_port; 197 ip->saddr = fd_data->src_ip; 198 udp->source = fd_data->src_port; 199 200 if (fd_data->flex_filter) { 201 u8 *payload = raw_packet + I40E_UDPIP_DUMMY_PACKET_LEN; 202 __be16 pattern = fd_data->flex_word; 203 u16 off = fd_data->flex_offset; 204 205 *((__force __be16 *)(payload + off)) = pattern; 206 } 207 208 fd_data->pctype = I40E_FILTER_PCTYPE_NONF_IPV4_UDP; 209 ret = i40e_program_fdir_filter(fd_data, raw_packet, pf, add); 210 if (ret) { 211 dev_info(&pf->pdev->dev, 212 "PCTYPE:%d, Filter command send failed for fd_id:%d (ret = %d)\n", 213 fd_data->pctype, fd_data->fd_id, ret); 214 /* Free the packet buffer since it wasn't added to the ring */ 215 kfree(raw_packet); 216 return -EOPNOTSUPP; 217 } else if (I40E_DEBUG_FD & pf->hw.debug_mask) { 218 if (add) 219 dev_info(&pf->pdev->dev, 220 "Filter OK for PCTYPE %d loc = %d\n", 221 fd_data->pctype, fd_data->fd_id); 222 else 223 dev_info(&pf->pdev->dev, 224 "Filter deleted for PCTYPE %d loc = %d\n", 225 fd_data->pctype, fd_data->fd_id); 226 } 227 228 if (add) 229 pf->fd_udp4_filter_cnt++; 230 else 231 pf->fd_udp4_filter_cnt--; 232 233 return 0; 234 } 235 236 #define I40E_TCPIP_DUMMY_PACKET_LEN 54 237 /** 238 * i40e_add_del_fdir_tcpv4 - Add/Remove TCPv4 filters 239 * @vsi: pointer to the targeted VSI 240 * @fd_data: the flow director data required for the FDir descriptor 241 * @add: true adds a filter, false removes it 242 * 243 * Returns 0 if the filters were successfully added or removed 244 **/ 245 static int i40e_add_del_fdir_tcpv4(struct i40e_vsi *vsi, 246 struct i40e_fdir_filter *fd_data, 247 bool add) 248 { 249 struct i40e_pf *pf = vsi->back; 250 struct tcphdr *tcp; 251 struct iphdr *ip; 252 u8 *raw_packet; 253 int ret; 254 /* Dummy packet */ 255 static char packet[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x08, 0, 256 0x45, 0, 0, 0x28, 0, 0, 0x40, 0, 0x40, 0x6, 0, 0, 0, 0, 0, 0, 257 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x80, 0x11, 258 0x0, 0x72, 0, 0, 0, 0}; 259 260 raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL); 261 if (!raw_packet) 262 return -ENOMEM; 263 memcpy(raw_packet, packet, I40E_TCPIP_DUMMY_PACKET_LEN); 264 265 ip = (struct iphdr *)(raw_packet + IP_HEADER_OFFSET); 266 tcp = (struct tcphdr *)(raw_packet + IP_HEADER_OFFSET 267 + sizeof(struct iphdr)); 268 269 ip->daddr = fd_data->dst_ip; 270 tcp->dest = fd_data->dst_port; 271 ip->saddr = fd_data->src_ip; 272 tcp->source = fd_data->src_port; 273 274 if (fd_data->flex_filter) { 275 u8 *payload = raw_packet + I40E_TCPIP_DUMMY_PACKET_LEN; 276 __be16 pattern = fd_data->flex_word; 277 u16 off = fd_data->flex_offset; 278 279 *((__force __be16 *)(payload + off)) = pattern; 280 } 281 282 fd_data->pctype = I40E_FILTER_PCTYPE_NONF_IPV4_TCP; 283 ret = i40e_program_fdir_filter(fd_data, raw_packet, pf, add); 284 if (ret) { 285 dev_info(&pf->pdev->dev, 286 "PCTYPE:%d, Filter command send failed for fd_id:%d (ret = %d)\n", 287 fd_data->pctype, fd_data->fd_id, ret); 288 /* Free the packet buffer since it wasn't added to the ring */ 289 kfree(raw_packet); 290 return -EOPNOTSUPP; 291 } else if (I40E_DEBUG_FD & pf->hw.debug_mask) { 292 if (add) 293 dev_info(&pf->pdev->dev, "Filter OK for PCTYPE %d loc = %d)\n", 294 fd_data->pctype, fd_data->fd_id); 295 else 296 dev_info(&pf->pdev->dev, 297 "Filter deleted for PCTYPE %d loc = %d\n", 298 fd_data->pctype, fd_data->fd_id); 299 } 300 301 if (add) { 302 pf->fd_tcp4_filter_cnt++; 303 if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) && 304 I40E_DEBUG_FD & pf->hw.debug_mask) 305 dev_info(&pf->pdev->dev, "Forcing ATR off, sideband rules for TCP/IPv4 flow being applied\n"); 306 set_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state); 307 } else { 308 pf->fd_tcp4_filter_cnt--; 309 } 310 311 return 0; 312 } 313 314 #define I40E_SCTPIP_DUMMY_PACKET_LEN 46 315 /** 316 * i40e_add_del_fdir_sctpv4 - Add/Remove SCTPv4 Flow Director filters for 317 * a specific flow spec 318 * @vsi: pointer to the targeted VSI 319 * @fd_data: the flow director data required for the FDir descriptor 320 * @add: true adds a filter, false removes it 321 * 322 * Returns 0 if the filters were successfully added or removed 323 **/ 324 static int i40e_add_del_fdir_sctpv4(struct i40e_vsi *vsi, 325 struct i40e_fdir_filter *fd_data, 326 bool add) 327 { 328 struct i40e_pf *pf = vsi->back; 329 struct sctphdr *sctp; 330 struct iphdr *ip; 331 u8 *raw_packet; 332 int ret; 333 /* Dummy packet */ 334 static char packet[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x08, 0, 335 0x45, 0, 0, 0x20, 0, 0, 0x40, 0, 0x40, 0x84, 0, 0, 0, 0, 0, 0, 336 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; 337 338 raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL); 339 if (!raw_packet) 340 return -ENOMEM; 341 memcpy(raw_packet, packet, I40E_SCTPIP_DUMMY_PACKET_LEN); 342 343 ip = (struct iphdr *)(raw_packet + IP_HEADER_OFFSET); 344 sctp = (struct sctphdr *)(raw_packet + IP_HEADER_OFFSET 345 + sizeof(struct iphdr)); 346 347 ip->daddr = fd_data->dst_ip; 348 sctp->dest = fd_data->dst_port; 349 ip->saddr = fd_data->src_ip; 350 sctp->source = fd_data->src_port; 351 352 if (fd_data->flex_filter) { 353 u8 *payload = raw_packet + I40E_SCTPIP_DUMMY_PACKET_LEN; 354 __be16 pattern = fd_data->flex_word; 355 u16 off = fd_data->flex_offset; 356 357 *((__force __be16 *)(payload + off)) = pattern; 358 } 359 360 fd_data->pctype = I40E_FILTER_PCTYPE_NONF_IPV4_SCTP; 361 ret = i40e_program_fdir_filter(fd_data, raw_packet, pf, add); 362 if (ret) { 363 dev_info(&pf->pdev->dev, 364 "PCTYPE:%d, Filter command send failed for fd_id:%d (ret = %d)\n", 365 fd_data->pctype, fd_data->fd_id, ret); 366 /* Free the packet buffer since it wasn't added to the ring */ 367 kfree(raw_packet); 368 return -EOPNOTSUPP; 369 } else if (I40E_DEBUG_FD & pf->hw.debug_mask) { 370 if (add) 371 dev_info(&pf->pdev->dev, 372 "Filter OK for PCTYPE %d loc = %d\n", 373 fd_data->pctype, fd_data->fd_id); 374 else 375 dev_info(&pf->pdev->dev, 376 "Filter deleted for PCTYPE %d loc = %d\n", 377 fd_data->pctype, fd_data->fd_id); 378 } 379 380 if (add) 381 pf->fd_sctp4_filter_cnt++; 382 else 383 pf->fd_sctp4_filter_cnt--; 384 385 return 0; 386 } 387 388 #define I40E_IP_DUMMY_PACKET_LEN 34 389 /** 390 * i40e_add_del_fdir_ipv4 - Add/Remove IPv4 Flow Director filters for 391 * a specific flow spec 392 * @vsi: pointer to the targeted VSI 393 * @fd_data: the flow director data required for the FDir descriptor 394 * @add: true adds a filter, false removes it 395 * 396 * Returns 0 if the filters were successfully added or removed 397 **/ 398 static int i40e_add_del_fdir_ipv4(struct i40e_vsi *vsi, 399 struct i40e_fdir_filter *fd_data, 400 bool add) 401 { 402 struct i40e_pf *pf = vsi->back; 403 struct iphdr *ip; 404 u8 *raw_packet; 405 int ret; 406 int i; 407 static char packet[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x08, 0, 408 0x45, 0, 0, 0x14, 0, 0, 0x40, 0, 0x40, 0x10, 0, 0, 0, 0, 0, 0, 409 0, 0, 0, 0}; 410 411 for (i = I40E_FILTER_PCTYPE_NONF_IPV4_OTHER; 412 i <= I40E_FILTER_PCTYPE_FRAG_IPV4; i++) { 413 raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL); 414 if (!raw_packet) 415 return -ENOMEM; 416 memcpy(raw_packet, packet, I40E_IP_DUMMY_PACKET_LEN); 417 ip = (struct iphdr *)(raw_packet + IP_HEADER_OFFSET); 418 419 ip->saddr = fd_data->src_ip; 420 ip->daddr = fd_data->dst_ip; 421 ip->protocol = 0; 422 423 if (fd_data->flex_filter) { 424 u8 *payload = raw_packet + I40E_IP_DUMMY_PACKET_LEN; 425 __be16 pattern = fd_data->flex_word; 426 u16 off = fd_data->flex_offset; 427 428 *((__force __be16 *)(payload + off)) = pattern; 429 } 430 431 fd_data->pctype = i; 432 ret = i40e_program_fdir_filter(fd_data, raw_packet, pf, add); 433 if (ret) { 434 dev_info(&pf->pdev->dev, 435 "PCTYPE:%d, Filter command send failed for fd_id:%d (ret = %d)\n", 436 fd_data->pctype, fd_data->fd_id, ret); 437 /* The packet buffer wasn't added to the ring so we 438 * need to free it now. 439 */ 440 kfree(raw_packet); 441 return -EOPNOTSUPP; 442 } else if (I40E_DEBUG_FD & pf->hw.debug_mask) { 443 if (add) 444 dev_info(&pf->pdev->dev, 445 "Filter OK for PCTYPE %d loc = %d\n", 446 fd_data->pctype, fd_data->fd_id); 447 else 448 dev_info(&pf->pdev->dev, 449 "Filter deleted for PCTYPE %d loc = %d\n", 450 fd_data->pctype, fd_data->fd_id); 451 } 452 } 453 454 if (add) 455 pf->fd_ip4_filter_cnt++; 456 else 457 pf->fd_ip4_filter_cnt--; 458 459 return 0; 460 } 461 462 /** 463 * i40e_add_del_fdir - Build raw packets to add/del fdir filter 464 * @vsi: pointer to the targeted VSI 465 * @input: filter to add or delete 466 * @add: true adds a filter, false removes it 467 * 468 **/ 469 int i40e_add_del_fdir(struct i40e_vsi *vsi, 470 struct i40e_fdir_filter *input, bool add) 471 { 472 struct i40e_pf *pf = vsi->back; 473 int ret; 474 475 switch (input->flow_type & ~FLOW_EXT) { 476 case TCP_V4_FLOW: 477 ret = i40e_add_del_fdir_tcpv4(vsi, input, add); 478 break; 479 case UDP_V4_FLOW: 480 ret = i40e_add_del_fdir_udpv4(vsi, input, add); 481 break; 482 case SCTP_V4_FLOW: 483 ret = i40e_add_del_fdir_sctpv4(vsi, input, add); 484 break; 485 case IP_USER_FLOW: 486 switch (input->ip4_proto) { 487 case IPPROTO_TCP: 488 ret = i40e_add_del_fdir_tcpv4(vsi, input, add); 489 break; 490 case IPPROTO_UDP: 491 ret = i40e_add_del_fdir_udpv4(vsi, input, add); 492 break; 493 case IPPROTO_SCTP: 494 ret = i40e_add_del_fdir_sctpv4(vsi, input, add); 495 break; 496 case IPPROTO_IP: 497 ret = i40e_add_del_fdir_ipv4(vsi, input, add); 498 break; 499 default: 500 /* We cannot support masking based on protocol */ 501 dev_info(&pf->pdev->dev, "Unsupported IPv4 protocol 0x%02x\n", 502 input->ip4_proto); 503 return -EINVAL; 504 } 505 break; 506 default: 507 dev_info(&pf->pdev->dev, "Unsupported flow type 0x%02x\n", 508 input->flow_type); 509 return -EINVAL; 510 } 511 512 /* The buffer allocated here will be normally be freed by 513 * i40e_clean_fdir_tx_irq() as it reclaims resources after transmit 514 * completion. In the event of an error adding the buffer to the FDIR 515 * ring, it will immediately be freed. It may also be freed by 516 * i40e_clean_tx_ring() when closing the VSI. 517 */ 518 return ret; 519 } 520 521 /** 522 * i40e_fd_handle_status - check the Programming Status for FD 523 * @rx_ring: the Rx ring for this descriptor 524 * @rx_desc: the Rx descriptor for programming Status, not a packet descriptor. 525 * @prog_id: the id originally used for programming 526 * 527 * This is used to verify if the FD programming or invalidation 528 * requested by SW to the HW is successful or not and take actions accordingly. 529 **/ 530 void i40e_fd_handle_status(struct i40e_ring *rx_ring, 531 union i40e_rx_desc *rx_desc, u8 prog_id) 532 { 533 struct i40e_pf *pf = rx_ring->vsi->back; 534 struct pci_dev *pdev = pf->pdev; 535 u32 fcnt_prog, fcnt_avail; 536 u32 error; 537 u64 qw; 538 539 qw = le64_to_cpu(rx_desc->wb.qword1.status_error_len); 540 error = (qw & I40E_RX_PROG_STATUS_DESC_QW1_ERROR_MASK) >> 541 I40E_RX_PROG_STATUS_DESC_QW1_ERROR_SHIFT; 542 543 if (error == BIT(I40E_RX_PROG_STATUS_DESC_FD_TBL_FULL_SHIFT)) { 544 pf->fd_inv = le32_to_cpu(rx_desc->wb.qword0.hi_dword.fd_id); 545 if ((rx_desc->wb.qword0.hi_dword.fd_id != 0) || 546 (I40E_DEBUG_FD & pf->hw.debug_mask)) 547 dev_warn(&pdev->dev, "ntuple filter loc = %d, could not be added\n", 548 pf->fd_inv); 549 550 /* Check if the programming error is for ATR. 551 * If so, auto disable ATR and set a state for 552 * flush in progress. Next time we come here if flush is in 553 * progress do nothing, once flush is complete the state will 554 * be cleared. 555 */ 556 if (test_bit(__I40E_FD_FLUSH_REQUESTED, pf->state)) 557 return; 558 559 pf->fd_add_err++; 560 /* store the current atr filter count */ 561 pf->fd_atr_cnt = i40e_get_current_atr_cnt(pf); 562 563 if ((rx_desc->wb.qword0.hi_dword.fd_id == 0) && 564 test_bit(__I40E_FD_SB_AUTO_DISABLED, pf->state)) { 565 /* These set_bit() calls aren't atomic with the 566 * test_bit() here, but worse case we potentially 567 * disable ATR and queue a flush right after SB 568 * support is re-enabled. That shouldn't cause an 569 * issue in practice 570 */ 571 set_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state); 572 set_bit(__I40E_FD_FLUSH_REQUESTED, pf->state); 573 } 574 575 /* filter programming failed most likely due to table full */ 576 fcnt_prog = i40e_get_global_fd_count(pf); 577 fcnt_avail = pf->fdir_pf_filter_count; 578 /* If ATR is running fcnt_prog can quickly change, 579 * if we are very close to full, it makes sense to disable 580 * FD ATR/SB and then re-enable it when there is room. 581 */ 582 if (fcnt_prog >= (fcnt_avail - I40E_FDIR_BUFFER_FULL_MARGIN)) { 583 if ((pf->flags & I40E_FLAG_FD_SB_ENABLED) && 584 !test_and_set_bit(__I40E_FD_SB_AUTO_DISABLED, 585 pf->state)) 586 if (I40E_DEBUG_FD & pf->hw.debug_mask) 587 dev_warn(&pdev->dev, "FD filter space full, new ntuple rules will not be added\n"); 588 } 589 } else if (error == BIT(I40E_RX_PROG_STATUS_DESC_NO_FD_ENTRY_SHIFT)) { 590 if (I40E_DEBUG_FD & pf->hw.debug_mask) 591 dev_info(&pdev->dev, "ntuple filter fd_id = %d, could not be removed\n", 592 rx_desc->wb.qword0.hi_dword.fd_id); 593 } 594 } 595 596 /** 597 * i40e_unmap_and_free_tx_resource - Release a Tx buffer 598 * @ring: the ring that owns the buffer 599 * @tx_buffer: the buffer to free 600 **/ 601 static void i40e_unmap_and_free_tx_resource(struct i40e_ring *ring, 602 struct i40e_tx_buffer *tx_buffer) 603 { 604 if (tx_buffer->skb) { 605 if (tx_buffer->tx_flags & I40E_TX_FLAGS_FD_SB) 606 kfree(tx_buffer->raw_buf); 607 else if (ring_is_xdp(ring)) 608 xdp_return_frame(tx_buffer->xdpf); 609 else 610 dev_kfree_skb_any(tx_buffer->skb); 611 if (dma_unmap_len(tx_buffer, len)) 612 dma_unmap_single(ring->dev, 613 dma_unmap_addr(tx_buffer, dma), 614 dma_unmap_len(tx_buffer, len), 615 DMA_TO_DEVICE); 616 } else if (dma_unmap_len(tx_buffer, len)) { 617 dma_unmap_page(ring->dev, 618 dma_unmap_addr(tx_buffer, dma), 619 dma_unmap_len(tx_buffer, len), 620 DMA_TO_DEVICE); 621 } 622 623 tx_buffer->next_to_watch = NULL; 624 tx_buffer->skb = NULL; 625 dma_unmap_len_set(tx_buffer, len, 0); 626 /* tx_buffer must be completely set up in the transmit path */ 627 } 628 629 /** 630 * i40e_clean_tx_ring - Free any empty Tx buffers 631 * @tx_ring: ring to be cleaned 632 **/ 633 void i40e_clean_tx_ring(struct i40e_ring *tx_ring) 634 { 635 unsigned long bi_size; 636 u16 i; 637 638 if (ring_is_xdp(tx_ring) && tx_ring->xsk_umem) { 639 i40e_xsk_clean_tx_ring(tx_ring); 640 } else { 641 /* ring already cleared, nothing to do */ 642 if (!tx_ring->tx_bi) 643 return; 644 645 /* Free all the Tx ring sk_buffs */ 646 for (i = 0; i < tx_ring->count; i++) 647 i40e_unmap_and_free_tx_resource(tx_ring, 648 &tx_ring->tx_bi[i]); 649 } 650 651 bi_size = sizeof(struct i40e_tx_buffer) * tx_ring->count; 652 memset(tx_ring->tx_bi, 0, bi_size); 653 654 /* Zero out the descriptor ring */ 655 memset(tx_ring->desc, 0, tx_ring->size); 656 657 tx_ring->next_to_use = 0; 658 tx_ring->next_to_clean = 0; 659 660 if (!tx_ring->netdev) 661 return; 662 663 /* cleanup Tx queue statistics */ 664 netdev_tx_reset_queue(txring_txq(tx_ring)); 665 } 666 667 /** 668 * i40e_free_tx_resources - Free Tx resources per queue 669 * @tx_ring: Tx descriptor ring for a specific queue 670 * 671 * Free all transmit software resources 672 **/ 673 void i40e_free_tx_resources(struct i40e_ring *tx_ring) 674 { 675 i40e_clean_tx_ring(tx_ring); 676 kfree(tx_ring->tx_bi); 677 tx_ring->tx_bi = NULL; 678 679 if (tx_ring->desc) { 680 dma_free_coherent(tx_ring->dev, tx_ring->size, 681 tx_ring->desc, tx_ring->dma); 682 tx_ring->desc = NULL; 683 } 684 } 685 686 /** 687 * i40e_get_tx_pending - how many tx descriptors not processed 688 * @ring: the ring of descriptors 689 * @in_sw: use SW variables 690 * 691 * Since there is no access to the ring head register 692 * in XL710, we need to use our local copies 693 **/ 694 u32 i40e_get_tx_pending(struct i40e_ring *ring, bool in_sw) 695 { 696 u32 head, tail; 697 698 if (!in_sw) { 699 head = i40e_get_head(ring); 700 tail = readl(ring->tail); 701 } else { 702 head = ring->next_to_clean; 703 tail = ring->next_to_use; 704 } 705 706 if (head != tail) 707 return (head < tail) ? 708 tail - head : (tail + ring->count - head); 709 710 return 0; 711 } 712 713 /** 714 * i40e_detect_recover_hung - Function to detect and recover hung_queues 715 * @vsi: pointer to vsi struct with tx queues 716 * 717 * VSI has netdev and netdev has TX queues. This function is to check each of 718 * those TX queues if they are hung, trigger recovery by issuing SW interrupt. 719 **/ 720 void i40e_detect_recover_hung(struct i40e_vsi *vsi) 721 { 722 struct i40e_ring *tx_ring = NULL; 723 struct net_device *netdev; 724 unsigned int i; 725 int packets; 726 727 if (!vsi) 728 return; 729 730 if (test_bit(__I40E_VSI_DOWN, vsi->state)) 731 return; 732 733 netdev = vsi->netdev; 734 if (!netdev) 735 return; 736 737 if (!netif_carrier_ok(netdev)) 738 return; 739 740 for (i = 0; i < vsi->num_queue_pairs; i++) { 741 tx_ring = vsi->tx_rings[i]; 742 if (tx_ring && tx_ring->desc) { 743 /* If packet counter has not changed the queue is 744 * likely stalled, so force an interrupt for this 745 * queue. 746 * 747 * prev_pkt_ctr would be negative if there was no 748 * pending work. 749 */ 750 packets = tx_ring->stats.packets & INT_MAX; 751 if (tx_ring->tx_stats.prev_pkt_ctr == packets) { 752 i40e_force_wb(vsi, tx_ring->q_vector); 753 continue; 754 } 755 756 /* Memory barrier between read of packet count and call 757 * to i40e_get_tx_pending() 758 */ 759 smp_rmb(); 760 tx_ring->tx_stats.prev_pkt_ctr = 761 i40e_get_tx_pending(tx_ring, true) ? packets : -1; 762 } 763 } 764 } 765 766 /** 767 * i40e_clean_tx_irq - Reclaim resources after transmit completes 768 * @vsi: the VSI we care about 769 * @tx_ring: Tx ring to clean 770 * @napi_budget: Used to determine if we are in netpoll 771 * 772 * Returns true if there's any budget left (e.g. the clean is finished) 773 **/ 774 static bool i40e_clean_tx_irq(struct i40e_vsi *vsi, 775 struct i40e_ring *tx_ring, int napi_budget) 776 { 777 u16 i = tx_ring->next_to_clean; 778 struct i40e_tx_buffer *tx_buf; 779 struct i40e_tx_desc *tx_head; 780 struct i40e_tx_desc *tx_desc; 781 unsigned int total_bytes = 0, total_packets = 0; 782 unsigned int budget = vsi->work_limit; 783 784 tx_buf = &tx_ring->tx_bi[i]; 785 tx_desc = I40E_TX_DESC(tx_ring, i); 786 i -= tx_ring->count; 787 788 tx_head = I40E_TX_DESC(tx_ring, i40e_get_head(tx_ring)); 789 790 do { 791 struct i40e_tx_desc *eop_desc = tx_buf->next_to_watch; 792 793 /* if next_to_watch is not set then there is no work pending */ 794 if (!eop_desc) 795 break; 796 797 /* prevent any other reads prior to eop_desc */ 798 smp_rmb(); 799 800 i40e_trace(clean_tx_irq, tx_ring, tx_desc, tx_buf); 801 /* we have caught up to head, no work left to do */ 802 if (tx_head == tx_desc) 803 break; 804 805 /* clear next_to_watch to prevent false hangs */ 806 tx_buf->next_to_watch = NULL; 807 808 /* update the statistics for this packet */ 809 total_bytes += tx_buf->bytecount; 810 total_packets += tx_buf->gso_segs; 811 812 /* free the skb/XDP data */ 813 if (ring_is_xdp(tx_ring)) 814 xdp_return_frame(tx_buf->xdpf); 815 else 816 napi_consume_skb(tx_buf->skb, napi_budget); 817 818 /* unmap skb header data */ 819 dma_unmap_single(tx_ring->dev, 820 dma_unmap_addr(tx_buf, dma), 821 dma_unmap_len(tx_buf, len), 822 DMA_TO_DEVICE); 823 824 /* clear tx_buffer data */ 825 tx_buf->skb = NULL; 826 dma_unmap_len_set(tx_buf, len, 0); 827 828 /* unmap remaining buffers */ 829 while (tx_desc != eop_desc) { 830 i40e_trace(clean_tx_irq_unmap, 831 tx_ring, tx_desc, tx_buf); 832 833 tx_buf++; 834 tx_desc++; 835 i++; 836 if (unlikely(!i)) { 837 i -= tx_ring->count; 838 tx_buf = tx_ring->tx_bi; 839 tx_desc = I40E_TX_DESC(tx_ring, 0); 840 } 841 842 /* unmap any remaining paged data */ 843 if (dma_unmap_len(tx_buf, len)) { 844 dma_unmap_page(tx_ring->dev, 845 dma_unmap_addr(tx_buf, dma), 846 dma_unmap_len(tx_buf, len), 847 DMA_TO_DEVICE); 848 dma_unmap_len_set(tx_buf, len, 0); 849 } 850 } 851 852 /* move us one more past the eop_desc for start of next pkt */ 853 tx_buf++; 854 tx_desc++; 855 i++; 856 if (unlikely(!i)) { 857 i -= tx_ring->count; 858 tx_buf = tx_ring->tx_bi; 859 tx_desc = I40E_TX_DESC(tx_ring, 0); 860 } 861 862 prefetch(tx_desc); 863 864 /* update budget accounting */ 865 budget--; 866 } while (likely(budget)); 867 868 i += tx_ring->count; 869 tx_ring->next_to_clean = i; 870 i40e_update_tx_stats(tx_ring, total_packets, total_bytes); 871 i40e_arm_wb(tx_ring, vsi, budget); 872 873 if (ring_is_xdp(tx_ring)) 874 return !!budget; 875 876 /* notify netdev of completed buffers */ 877 netdev_tx_completed_queue(txring_txq(tx_ring), 878 total_packets, total_bytes); 879 880 #define TX_WAKE_THRESHOLD ((s16)(DESC_NEEDED * 2)) 881 if (unlikely(total_packets && netif_carrier_ok(tx_ring->netdev) && 882 (I40E_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD))) { 883 /* Make sure that anybody stopping the queue after this 884 * sees the new next_to_clean. 885 */ 886 smp_mb(); 887 if (__netif_subqueue_stopped(tx_ring->netdev, 888 tx_ring->queue_index) && 889 !test_bit(__I40E_VSI_DOWN, vsi->state)) { 890 netif_wake_subqueue(tx_ring->netdev, 891 tx_ring->queue_index); 892 ++tx_ring->tx_stats.restart_queue; 893 } 894 } 895 896 return !!budget; 897 } 898 899 /** 900 * i40e_enable_wb_on_itr - Arm hardware to do a wb, interrupts are not enabled 901 * @vsi: the VSI we care about 902 * @q_vector: the vector on which to enable writeback 903 * 904 **/ 905 static void i40e_enable_wb_on_itr(struct i40e_vsi *vsi, 906 struct i40e_q_vector *q_vector) 907 { 908 u16 flags = q_vector->tx.ring[0].flags; 909 u32 val; 910 911 if (!(flags & I40E_TXR_FLAGS_WB_ON_ITR)) 912 return; 913 914 if (q_vector->arm_wb_state) 915 return; 916 917 if (vsi->back->flags & I40E_FLAG_MSIX_ENABLED) { 918 val = I40E_PFINT_DYN_CTLN_WB_ON_ITR_MASK | 919 I40E_PFINT_DYN_CTLN_ITR_INDX_MASK; /* set noitr */ 920 921 wr32(&vsi->back->hw, 922 I40E_PFINT_DYN_CTLN(q_vector->reg_idx), 923 val); 924 } else { 925 val = I40E_PFINT_DYN_CTL0_WB_ON_ITR_MASK | 926 I40E_PFINT_DYN_CTL0_ITR_INDX_MASK; /* set noitr */ 927 928 wr32(&vsi->back->hw, I40E_PFINT_DYN_CTL0, val); 929 } 930 q_vector->arm_wb_state = true; 931 } 932 933 /** 934 * i40e_force_wb - Issue SW Interrupt so HW does a wb 935 * @vsi: the VSI we care about 936 * @q_vector: the vector on which to force writeback 937 * 938 **/ 939 void i40e_force_wb(struct i40e_vsi *vsi, struct i40e_q_vector *q_vector) 940 { 941 if (vsi->back->flags & I40E_FLAG_MSIX_ENABLED) { 942 u32 val = I40E_PFINT_DYN_CTLN_INTENA_MASK | 943 I40E_PFINT_DYN_CTLN_ITR_INDX_MASK | /* set noitr */ 944 I40E_PFINT_DYN_CTLN_SWINT_TRIG_MASK | 945 I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_MASK; 946 /* allow 00 to be written to the index */ 947 948 wr32(&vsi->back->hw, 949 I40E_PFINT_DYN_CTLN(q_vector->reg_idx), val); 950 } else { 951 u32 val = I40E_PFINT_DYN_CTL0_INTENA_MASK | 952 I40E_PFINT_DYN_CTL0_ITR_INDX_MASK | /* set noitr */ 953 I40E_PFINT_DYN_CTL0_SWINT_TRIG_MASK | 954 I40E_PFINT_DYN_CTL0_SW_ITR_INDX_ENA_MASK; 955 /* allow 00 to be written to the index */ 956 957 wr32(&vsi->back->hw, I40E_PFINT_DYN_CTL0, val); 958 } 959 } 960 961 static inline bool i40e_container_is_rx(struct i40e_q_vector *q_vector, 962 struct i40e_ring_container *rc) 963 { 964 return &q_vector->rx == rc; 965 } 966 967 static inline unsigned int i40e_itr_divisor(struct i40e_q_vector *q_vector) 968 { 969 unsigned int divisor; 970 971 switch (q_vector->vsi->back->hw.phy.link_info.link_speed) { 972 case I40E_LINK_SPEED_40GB: 973 divisor = I40E_ITR_ADAPTIVE_MIN_INC * 1024; 974 break; 975 case I40E_LINK_SPEED_25GB: 976 case I40E_LINK_SPEED_20GB: 977 divisor = I40E_ITR_ADAPTIVE_MIN_INC * 512; 978 break; 979 default: 980 case I40E_LINK_SPEED_10GB: 981 divisor = I40E_ITR_ADAPTIVE_MIN_INC * 256; 982 break; 983 case I40E_LINK_SPEED_1GB: 984 case I40E_LINK_SPEED_100MB: 985 divisor = I40E_ITR_ADAPTIVE_MIN_INC * 32; 986 break; 987 } 988 989 return divisor; 990 } 991 992 /** 993 * i40e_update_itr - update the dynamic ITR value based on statistics 994 * @q_vector: structure containing interrupt and ring information 995 * @rc: structure containing ring performance data 996 * 997 * Stores a new ITR value based on packets and byte 998 * counts during the last interrupt. The advantage of per interrupt 999 * computation is faster updates and more accurate ITR for the current 1000 * traffic pattern. Constants in this function were computed 1001 * based on theoretical maximum wire speed and thresholds were set based 1002 * on testing data as well as attempting to minimize response time 1003 * while increasing bulk throughput. 1004 **/ 1005 static void i40e_update_itr(struct i40e_q_vector *q_vector, 1006 struct i40e_ring_container *rc) 1007 { 1008 unsigned int avg_wire_size, packets, bytes, itr; 1009 unsigned long next_update = jiffies; 1010 1011 /* If we don't have any rings just leave ourselves set for maximum 1012 * possible latency so we take ourselves out of the equation. 1013 */ 1014 if (!rc->ring || !ITR_IS_DYNAMIC(rc->ring->itr_setting)) 1015 return; 1016 1017 /* For Rx we want to push the delay up and default to low latency. 1018 * for Tx we want to pull the delay down and default to high latency. 1019 */ 1020 itr = i40e_container_is_rx(q_vector, rc) ? 1021 I40E_ITR_ADAPTIVE_MIN_USECS | I40E_ITR_ADAPTIVE_LATENCY : 1022 I40E_ITR_ADAPTIVE_MAX_USECS | I40E_ITR_ADAPTIVE_LATENCY; 1023 1024 /* If we didn't update within up to 1 - 2 jiffies we can assume 1025 * that either packets are coming in so slow there hasn't been 1026 * any work, or that there is so much work that NAPI is dealing 1027 * with interrupt moderation and we don't need to do anything. 1028 */ 1029 if (time_after(next_update, rc->next_update)) 1030 goto clear_counts; 1031 1032 /* If itr_countdown is set it means we programmed an ITR within 1033 * the last 4 interrupt cycles. This has a side effect of us 1034 * potentially firing an early interrupt. In order to work around 1035 * this we need to throw out any data received for a few 1036 * interrupts following the update. 1037 */ 1038 if (q_vector->itr_countdown) { 1039 itr = rc->target_itr; 1040 goto clear_counts; 1041 } 1042 1043 packets = rc->total_packets; 1044 bytes = rc->total_bytes; 1045 1046 if (i40e_container_is_rx(q_vector, rc)) { 1047 /* If Rx there are 1 to 4 packets and bytes are less than 1048 * 9000 assume insufficient data to use bulk rate limiting 1049 * approach unless Tx is already in bulk rate limiting. We 1050 * are likely latency driven. 1051 */ 1052 if (packets && packets < 4 && bytes < 9000 && 1053 (q_vector->tx.target_itr & I40E_ITR_ADAPTIVE_LATENCY)) { 1054 itr = I40E_ITR_ADAPTIVE_LATENCY; 1055 goto adjust_by_size; 1056 } 1057 } else if (packets < 4) { 1058 /* If we have Tx and Rx ITR maxed and Tx ITR is running in 1059 * bulk mode and we are receiving 4 or fewer packets just 1060 * reset the ITR_ADAPTIVE_LATENCY bit for latency mode so 1061 * that the Rx can relax. 1062 */ 1063 if (rc->target_itr == I40E_ITR_ADAPTIVE_MAX_USECS && 1064 (q_vector->rx.target_itr & I40E_ITR_MASK) == 1065 I40E_ITR_ADAPTIVE_MAX_USECS) 1066 goto clear_counts; 1067 } else if (packets > 32) { 1068 /* If we have processed over 32 packets in a single interrupt 1069 * for Tx assume we need to switch over to "bulk" mode. 1070 */ 1071 rc->target_itr &= ~I40E_ITR_ADAPTIVE_LATENCY; 1072 } 1073 1074 /* We have no packets to actually measure against. This means 1075 * either one of the other queues on this vector is active or 1076 * we are a Tx queue doing TSO with too high of an interrupt rate. 1077 * 1078 * Between 4 and 56 we can assume that our current interrupt delay 1079 * is only slightly too low. As such we should increase it by a small 1080 * fixed amount. 1081 */ 1082 if (packets < 56) { 1083 itr = rc->target_itr + I40E_ITR_ADAPTIVE_MIN_INC; 1084 if ((itr & I40E_ITR_MASK) > I40E_ITR_ADAPTIVE_MAX_USECS) { 1085 itr &= I40E_ITR_ADAPTIVE_LATENCY; 1086 itr += I40E_ITR_ADAPTIVE_MAX_USECS; 1087 } 1088 goto clear_counts; 1089 } 1090 1091 if (packets <= 256) { 1092 itr = min(q_vector->tx.current_itr, q_vector->rx.current_itr); 1093 itr &= I40E_ITR_MASK; 1094 1095 /* Between 56 and 112 is our "goldilocks" zone where we are 1096 * working out "just right". Just report that our current 1097 * ITR is good for us. 1098 */ 1099 if (packets <= 112) 1100 goto clear_counts; 1101 1102 /* If packet count is 128 or greater we are likely looking 1103 * at a slight overrun of the delay we want. Try halving 1104 * our delay to see if that will cut the number of packets 1105 * in half per interrupt. 1106 */ 1107 itr /= 2; 1108 itr &= I40E_ITR_MASK; 1109 if (itr < I40E_ITR_ADAPTIVE_MIN_USECS) 1110 itr = I40E_ITR_ADAPTIVE_MIN_USECS; 1111 1112 goto clear_counts; 1113 } 1114 1115 /* The paths below assume we are dealing with a bulk ITR since 1116 * number of packets is greater than 256. We are just going to have 1117 * to compute a value and try to bring the count under control, 1118 * though for smaller packet sizes there isn't much we can do as 1119 * NAPI polling will likely be kicking in sooner rather than later. 1120 */ 1121 itr = I40E_ITR_ADAPTIVE_BULK; 1122 1123 adjust_by_size: 1124 /* If packet counts are 256 or greater we can assume we have a gross 1125 * overestimation of what the rate should be. Instead of trying to fine 1126 * tune it just use the formula below to try and dial in an exact value 1127 * give the current packet size of the frame. 1128 */ 1129 avg_wire_size = bytes / packets; 1130 1131 /* The following is a crude approximation of: 1132 * wmem_default / (size + overhead) = desired_pkts_per_int 1133 * rate / bits_per_byte / (size + ethernet overhead) = pkt_rate 1134 * (desired_pkt_rate / pkt_rate) * usecs_per_sec = ITR value 1135 * 1136 * Assuming wmem_default is 212992 and overhead is 640 bytes per 1137 * packet, (256 skb, 64 headroom, 320 shared info), we can reduce the 1138 * formula down to 1139 * 1140 * (170 * (size + 24)) / (size + 640) = ITR 1141 * 1142 * We first do some math on the packet size and then finally bitshift 1143 * by 8 after rounding up. We also have to account for PCIe link speed 1144 * difference as ITR scales based on this. 1145 */ 1146 if (avg_wire_size <= 60) { 1147 /* Start at 250k ints/sec */ 1148 avg_wire_size = 4096; 1149 } else if (avg_wire_size <= 380) { 1150 /* 250K ints/sec to 60K ints/sec */ 1151 avg_wire_size *= 40; 1152 avg_wire_size += 1696; 1153 } else if (avg_wire_size <= 1084) { 1154 /* 60K ints/sec to 36K ints/sec */ 1155 avg_wire_size *= 15; 1156 avg_wire_size += 11452; 1157 } else if (avg_wire_size <= 1980) { 1158 /* 36K ints/sec to 30K ints/sec */ 1159 avg_wire_size *= 5; 1160 avg_wire_size += 22420; 1161 } else { 1162 /* plateau at a limit of 30K ints/sec */ 1163 avg_wire_size = 32256; 1164 } 1165 1166 /* If we are in low latency mode halve our delay which doubles the 1167 * rate to somewhere between 100K to 16K ints/sec 1168 */ 1169 if (itr & I40E_ITR_ADAPTIVE_LATENCY) 1170 avg_wire_size /= 2; 1171 1172 /* Resultant value is 256 times larger than it needs to be. This 1173 * gives us room to adjust the value as needed to either increase 1174 * or decrease the value based on link speeds of 10G, 2.5G, 1G, etc. 1175 * 1176 * Use addition as we have already recorded the new latency flag 1177 * for the ITR value. 1178 */ 1179 itr += DIV_ROUND_UP(avg_wire_size, i40e_itr_divisor(q_vector)) * 1180 I40E_ITR_ADAPTIVE_MIN_INC; 1181 1182 if ((itr & I40E_ITR_MASK) > I40E_ITR_ADAPTIVE_MAX_USECS) { 1183 itr &= I40E_ITR_ADAPTIVE_LATENCY; 1184 itr += I40E_ITR_ADAPTIVE_MAX_USECS; 1185 } 1186 1187 clear_counts: 1188 /* write back value */ 1189 rc->target_itr = itr; 1190 1191 /* next update should occur within next jiffy */ 1192 rc->next_update = next_update + 1; 1193 1194 rc->total_bytes = 0; 1195 rc->total_packets = 0; 1196 } 1197 1198 /** 1199 * i40e_reuse_rx_page - page flip buffer and store it back on the ring 1200 * @rx_ring: rx descriptor ring to store buffers on 1201 * @old_buff: donor buffer to have page reused 1202 * 1203 * Synchronizes page for reuse by the adapter 1204 **/ 1205 static void i40e_reuse_rx_page(struct i40e_ring *rx_ring, 1206 struct i40e_rx_buffer *old_buff) 1207 { 1208 struct i40e_rx_buffer *new_buff; 1209 u16 nta = rx_ring->next_to_alloc; 1210 1211 new_buff = &rx_ring->rx_bi[nta]; 1212 1213 /* update, and store next to alloc */ 1214 nta++; 1215 rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0; 1216 1217 /* transfer page from old buffer to new buffer */ 1218 new_buff->dma = old_buff->dma; 1219 new_buff->page = old_buff->page; 1220 new_buff->page_offset = old_buff->page_offset; 1221 new_buff->pagecnt_bias = old_buff->pagecnt_bias; 1222 1223 rx_ring->rx_stats.page_reuse_count++; 1224 1225 /* clear contents of buffer_info */ 1226 old_buff->page = NULL; 1227 } 1228 1229 /** 1230 * i40e_rx_is_programming_status - check for programming status descriptor 1231 * @qw: qword representing status_error_len in CPU ordering 1232 * 1233 * The value of in the descriptor length field indicate if this 1234 * is a programming status descriptor for flow director or FCoE 1235 * by the value of I40E_RX_PROG_STATUS_DESC_LENGTH, otherwise 1236 * it is a packet descriptor. 1237 **/ 1238 static inline bool i40e_rx_is_programming_status(u64 qw) 1239 { 1240 /* The Rx filter programming status and SPH bit occupy the same 1241 * spot in the descriptor. Since we don't support packet split we 1242 * can just reuse the bit as an indication that this is a 1243 * programming status descriptor. 1244 */ 1245 return qw & I40E_RXD_QW1_LENGTH_SPH_MASK; 1246 } 1247 1248 /** 1249 * i40e_clean_programming_status - try clean the programming status descriptor 1250 * @rx_ring: the rx ring that has this descriptor 1251 * @rx_desc: the rx descriptor written back by HW 1252 * @qw: qword representing status_error_len in CPU ordering 1253 * 1254 * Flow director should handle FD_FILTER_STATUS to check its filter programming 1255 * status being successful or not and take actions accordingly. FCoE should 1256 * handle its context/filter programming/invalidation status and take actions. 1257 * 1258 * Returns an i40e_rx_buffer to reuse if the cleanup occurred, otherwise NULL. 1259 **/ 1260 struct i40e_rx_buffer *i40e_clean_programming_status( 1261 struct i40e_ring *rx_ring, 1262 union i40e_rx_desc *rx_desc, 1263 u64 qw) 1264 { 1265 struct i40e_rx_buffer *rx_buffer; 1266 u32 ntc; 1267 u8 id; 1268 1269 if (!i40e_rx_is_programming_status(qw)) 1270 return NULL; 1271 1272 ntc = rx_ring->next_to_clean; 1273 1274 /* fetch, update, and store next to clean */ 1275 rx_buffer = &rx_ring->rx_bi[ntc++]; 1276 ntc = (ntc < rx_ring->count) ? ntc : 0; 1277 rx_ring->next_to_clean = ntc; 1278 1279 prefetch(I40E_RX_DESC(rx_ring, ntc)); 1280 1281 id = (qw & I40E_RX_PROG_STATUS_DESC_QW1_PROGID_MASK) >> 1282 I40E_RX_PROG_STATUS_DESC_QW1_PROGID_SHIFT; 1283 1284 if (id == I40E_RX_PROG_STATUS_DESC_FD_FILTER_STATUS) 1285 i40e_fd_handle_status(rx_ring, rx_desc, id); 1286 1287 return rx_buffer; 1288 } 1289 1290 /** 1291 * i40e_setup_tx_descriptors - Allocate the Tx descriptors 1292 * @tx_ring: the tx ring to set up 1293 * 1294 * Return 0 on success, negative on error 1295 **/ 1296 int i40e_setup_tx_descriptors(struct i40e_ring *tx_ring) 1297 { 1298 struct device *dev = tx_ring->dev; 1299 int bi_size; 1300 1301 if (!dev) 1302 return -ENOMEM; 1303 1304 /* warn if we are about to overwrite the pointer */ 1305 WARN_ON(tx_ring->tx_bi); 1306 bi_size = sizeof(struct i40e_tx_buffer) * tx_ring->count; 1307 tx_ring->tx_bi = kzalloc(bi_size, GFP_KERNEL); 1308 if (!tx_ring->tx_bi) 1309 goto err; 1310 1311 u64_stats_init(&tx_ring->syncp); 1312 1313 /* round up to nearest 4K */ 1314 tx_ring->size = tx_ring->count * sizeof(struct i40e_tx_desc); 1315 /* add u32 for head writeback, align after this takes care of 1316 * guaranteeing this is at least one cache line in size 1317 */ 1318 tx_ring->size += sizeof(u32); 1319 tx_ring->size = ALIGN(tx_ring->size, 4096); 1320 tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size, 1321 &tx_ring->dma, GFP_KERNEL); 1322 if (!tx_ring->desc) { 1323 dev_info(dev, "Unable to allocate memory for the Tx descriptor ring, size=%d\n", 1324 tx_ring->size); 1325 goto err; 1326 } 1327 1328 tx_ring->next_to_use = 0; 1329 tx_ring->next_to_clean = 0; 1330 tx_ring->tx_stats.prev_pkt_ctr = -1; 1331 return 0; 1332 1333 err: 1334 kfree(tx_ring->tx_bi); 1335 tx_ring->tx_bi = NULL; 1336 return -ENOMEM; 1337 } 1338 1339 /** 1340 * i40e_clean_rx_ring - Free Rx buffers 1341 * @rx_ring: ring to be cleaned 1342 **/ 1343 void i40e_clean_rx_ring(struct i40e_ring *rx_ring) 1344 { 1345 unsigned long bi_size; 1346 u16 i; 1347 1348 /* ring already cleared, nothing to do */ 1349 if (!rx_ring->rx_bi) 1350 return; 1351 1352 if (rx_ring->skb) { 1353 dev_kfree_skb(rx_ring->skb); 1354 rx_ring->skb = NULL; 1355 } 1356 1357 if (rx_ring->xsk_umem) { 1358 i40e_xsk_clean_rx_ring(rx_ring); 1359 goto skip_free; 1360 } 1361 1362 /* Free all the Rx ring sk_buffs */ 1363 for (i = 0; i < rx_ring->count; i++) { 1364 struct i40e_rx_buffer *rx_bi = &rx_ring->rx_bi[i]; 1365 1366 if (!rx_bi->page) 1367 continue; 1368 1369 /* Invalidate cache lines that may have been written to by 1370 * device so that we avoid corrupting memory. 1371 */ 1372 dma_sync_single_range_for_cpu(rx_ring->dev, 1373 rx_bi->dma, 1374 rx_bi->page_offset, 1375 rx_ring->rx_buf_len, 1376 DMA_FROM_DEVICE); 1377 1378 /* free resources associated with mapping */ 1379 dma_unmap_page_attrs(rx_ring->dev, rx_bi->dma, 1380 i40e_rx_pg_size(rx_ring), 1381 DMA_FROM_DEVICE, 1382 I40E_RX_DMA_ATTR); 1383 1384 __page_frag_cache_drain(rx_bi->page, rx_bi->pagecnt_bias); 1385 1386 rx_bi->page = NULL; 1387 rx_bi->page_offset = 0; 1388 } 1389 1390 skip_free: 1391 bi_size = sizeof(struct i40e_rx_buffer) * rx_ring->count; 1392 memset(rx_ring->rx_bi, 0, bi_size); 1393 1394 /* Zero out the descriptor ring */ 1395 memset(rx_ring->desc, 0, rx_ring->size); 1396 1397 rx_ring->next_to_alloc = 0; 1398 rx_ring->next_to_clean = 0; 1399 rx_ring->next_to_use = 0; 1400 } 1401 1402 /** 1403 * i40e_free_rx_resources - Free Rx resources 1404 * @rx_ring: ring to clean the resources from 1405 * 1406 * Free all receive software resources 1407 **/ 1408 void i40e_free_rx_resources(struct i40e_ring *rx_ring) 1409 { 1410 i40e_clean_rx_ring(rx_ring); 1411 if (rx_ring->vsi->type == I40E_VSI_MAIN) 1412 xdp_rxq_info_unreg(&rx_ring->xdp_rxq); 1413 rx_ring->xdp_prog = NULL; 1414 kfree(rx_ring->rx_bi); 1415 rx_ring->rx_bi = NULL; 1416 1417 if (rx_ring->desc) { 1418 dma_free_coherent(rx_ring->dev, rx_ring->size, 1419 rx_ring->desc, rx_ring->dma); 1420 rx_ring->desc = NULL; 1421 } 1422 } 1423 1424 /** 1425 * i40e_setup_rx_descriptors - Allocate Rx descriptors 1426 * @rx_ring: Rx descriptor ring (for a specific queue) to setup 1427 * 1428 * Returns 0 on success, negative on failure 1429 **/ 1430 int i40e_setup_rx_descriptors(struct i40e_ring *rx_ring) 1431 { 1432 struct device *dev = rx_ring->dev; 1433 int err = -ENOMEM; 1434 int bi_size; 1435 1436 /* warn if we are about to overwrite the pointer */ 1437 WARN_ON(rx_ring->rx_bi); 1438 bi_size = sizeof(struct i40e_rx_buffer) * rx_ring->count; 1439 rx_ring->rx_bi = kzalloc(bi_size, GFP_KERNEL); 1440 if (!rx_ring->rx_bi) 1441 goto err; 1442 1443 u64_stats_init(&rx_ring->syncp); 1444 1445 /* Round up to nearest 4K */ 1446 rx_ring->size = rx_ring->count * sizeof(union i40e_32byte_rx_desc); 1447 rx_ring->size = ALIGN(rx_ring->size, 4096); 1448 rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size, 1449 &rx_ring->dma, GFP_KERNEL); 1450 1451 if (!rx_ring->desc) { 1452 dev_info(dev, "Unable to allocate memory for the Rx descriptor ring, size=%d\n", 1453 rx_ring->size); 1454 goto err; 1455 } 1456 1457 rx_ring->next_to_alloc = 0; 1458 rx_ring->next_to_clean = 0; 1459 rx_ring->next_to_use = 0; 1460 1461 /* XDP RX-queue info only needed for RX rings exposed to XDP */ 1462 if (rx_ring->vsi->type == I40E_VSI_MAIN) { 1463 err = xdp_rxq_info_reg(&rx_ring->xdp_rxq, rx_ring->netdev, 1464 rx_ring->queue_index); 1465 if (err < 0) 1466 goto err; 1467 } 1468 1469 rx_ring->xdp_prog = rx_ring->vsi->xdp_prog; 1470 1471 return 0; 1472 err: 1473 kfree(rx_ring->rx_bi); 1474 rx_ring->rx_bi = NULL; 1475 return err; 1476 } 1477 1478 /** 1479 * i40e_release_rx_desc - Store the new tail and head values 1480 * @rx_ring: ring to bump 1481 * @val: new head index 1482 **/ 1483 void i40e_release_rx_desc(struct i40e_ring *rx_ring, u32 val) 1484 { 1485 rx_ring->next_to_use = val; 1486 1487 /* update next to alloc since we have filled the ring */ 1488 rx_ring->next_to_alloc = val; 1489 1490 /* Force memory writes to complete before letting h/w 1491 * know there are new descriptors to fetch. (Only 1492 * applicable for weak-ordered memory model archs, 1493 * such as IA-64). 1494 */ 1495 wmb(); 1496 writel(val, rx_ring->tail); 1497 } 1498 1499 /** 1500 * i40e_rx_offset - Return expected offset into page to access data 1501 * @rx_ring: Ring we are requesting offset of 1502 * 1503 * Returns the offset value for ring into the data buffer. 1504 */ 1505 static inline unsigned int i40e_rx_offset(struct i40e_ring *rx_ring) 1506 { 1507 return ring_uses_build_skb(rx_ring) ? I40E_SKB_PAD : 0; 1508 } 1509 1510 /** 1511 * i40e_alloc_mapped_page - recycle or make a new page 1512 * @rx_ring: ring to use 1513 * @bi: rx_buffer struct to modify 1514 * 1515 * Returns true if the page was successfully allocated or 1516 * reused. 1517 **/ 1518 static bool i40e_alloc_mapped_page(struct i40e_ring *rx_ring, 1519 struct i40e_rx_buffer *bi) 1520 { 1521 struct page *page = bi->page; 1522 dma_addr_t dma; 1523 1524 /* since we are recycling buffers we should seldom need to alloc */ 1525 if (likely(page)) { 1526 rx_ring->rx_stats.page_reuse_count++; 1527 return true; 1528 } 1529 1530 /* alloc new page for storage */ 1531 page = dev_alloc_pages(i40e_rx_pg_order(rx_ring)); 1532 if (unlikely(!page)) { 1533 rx_ring->rx_stats.alloc_page_failed++; 1534 return false; 1535 } 1536 1537 /* map page for use */ 1538 dma = dma_map_page_attrs(rx_ring->dev, page, 0, 1539 i40e_rx_pg_size(rx_ring), 1540 DMA_FROM_DEVICE, 1541 I40E_RX_DMA_ATTR); 1542 1543 /* if mapping failed free memory back to system since 1544 * there isn't much point in holding memory we can't use 1545 */ 1546 if (dma_mapping_error(rx_ring->dev, dma)) { 1547 __free_pages(page, i40e_rx_pg_order(rx_ring)); 1548 rx_ring->rx_stats.alloc_page_failed++; 1549 return false; 1550 } 1551 1552 bi->dma = dma; 1553 bi->page = page; 1554 bi->page_offset = i40e_rx_offset(rx_ring); 1555 page_ref_add(page, USHRT_MAX - 1); 1556 bi->pagecnt_bias = USHRT_MAX; 1557 1558 return true; 1559 } 1560 1561 /** 1562 * i40e_receive_skb - Send a completed packet up the stack 1563 * @rx_ring: rx ring in play 1564 * @skb: packet to send up 1565 * @vlan_tag: vlan tag for packet 1566 **/ 1567 void i40e_receive_skb(struct i40e_ring *rx_ring, 1568 struct sk_buff *skb, u16 vlan_tag) 1569 { 1570 struct i40e_q_vector *q_vector = rx_ring->q_vector; 1571 1572 if ((rx_ring->netdev->features & NETIF_F_HW_VLAN_CTAG_RX) && 1573 (vlan_tag & VLAN_VID_MASK)) 1574 __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag); 1575 1576 napi_gro_receive(&q_vector->napi, skb); 1577 } 1578 1579 /** 1580 * i40e_alloc_rx_buffers - Replace used receive buffers 1581 * @rx_ring: ring to place buffers on 1582 * @cleaned_count: number of buffers to replace 1583 * 1584 * Returns false if all allocations were successful, true if any fail 1585 **/ 1586 bool i40e_alloc_rx_buffers(struct i40e_ring *rx_ring, u16 cleaned_count) 1587 { 1588 u16 ntu = rx_ring->next_to_use; 1589 union i40e_rx_desc *rx_desc; 1590 struct i40e_rx_buffer *bi; 1591 1592 /* do nothing if no valid netdev defined */ 1593 if (!rx_ring->netdev || !cleaned_count) 1594 return false; 1595 1596 rx_desc = I40E_RX_DESC(rx_ring, ntu); 1597 bi = &rx_ring->rx_bi[ntu]; 1598 1599 do { 1600 if (!i40e_alloc_mapped_page(rx_ring, bi)) 1601 goto no_buffers; 1602 1603 /* sync the buffer for use by the device */ 1604 dma_sync_single_range_for_device(rx_ring->dev, bi->dma, 1605 bi->page_offset, 1606 rx_ring->rx_buf_len, 1607 DMA_FROM_DEVICE); 1608 1609 /* Refresh the desc even if buffer_addrs didn't change 1610 * because each write-back erases this info. 1611 */ 1612 rx_desc->read.pkt_addr = cpu_to_le64(bi->dma + bi->page_offset); 1613 1614 rx_desc++; 1615 bi++; 1616 ntu++; 1617 if (unlikely(ntu == rx_ring->count)) { 1618 rx_desc = I40E_RX_DESC(rx_ring, 0); 1619 bi = rx_ring->rx_bi; 1620 ntu = 0; 1621 } 1622 1623 /* clear the status bits for the next_to_use descriptor */ 1624 rx_desc->wb.qword1.status_error_len = 0; 1625 1626 cleaned_count--; 1627 } while (cleaned_count); 1628 1629 if (rx_ring->next_to_use != ntu) 1630 i40e_release_rx_desc(rx_ring, ntu); 1631 1632 return false; 1633 1634 no_buffers: 1635 if (rx_ring->next_to_use != ntu) 1636 i40e_release_rx_desc(rx_ring, ntu); 1637 1638 /* make sure to come back via polling to try again after 1639 * allocation failure 1640 */ 1641 return true; 1642 } 1643 1644 /** 1645 * i40e_rx_checksum - Indicate in skb if hw indicated a good cksum 1646 * @vsi: the VSI we care about 1647 * @skb: skb currently being received and modified 1648 * @rx_desc: the receive descriptor 1649 **/ 1650 static inline void i40e_rx_checksum(struct i40e_vsi *vsi, 1651 struct sk_buff *skb, 1652 union i40e_rx_desc *rx_desc) 1653 { 1654 struct i40e_rx_ptype_decoded decoded; 1655 u32 rx_error, rx_status; 1656 bool ipv4, ipv6; 1657 u8 ptype; 1658 u64 qword; 1659 1660 qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len); 1661 ptype = (qword & I40E_RXD_QW1_PTYPE_MASK) >> I40E_RXD_QW1_PTYPE_SHIFT; 1662 rx_error = (qword & I40E_RXD_QW1_ERROR_MASK) >> 1663 I40E_RXD_QW1_ERROR_SHIFT; 1664 rx_status = (qword & I40E_RXD_QW1_STATUS_MASK) >> 1665 I40E_RXD_QW1_STATUS_SHIFT; 1666 decoded = decode_rx_desc_ptype(ptype); 1667 1668 skb->ip_summed = CHECKSUM_NONE; 1669 1670 skb_checksum_none_assert(skb); 1671 1672 /* Rx csum enabled and ip headers found? */ 1673 if (!(vsi->netdev->features & NETIF_F_RXCSUM)) 1674 return; 1675 1676 /* did the hardware decode the packet and checksum? */ 1677 if (!(rx_status & BIT(I40E_RX_DESC_STATUS_L3L4P_SHIFT))) 1678 return; 1679 1680 /* both known and outer_ip must be set for the below code to work */ 1681 if (!(decoded.known && decoded.outer_ip)) 1682 return; 1683 1684 ipv4 = (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP) && 1685 (decoded.outer_ip_ver == I40E_RX_PTYPE_OUTER_IPV4); 1686 ipv6 = (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP) && 1687 (decoded.outer_ip_ver == I40E_RX_PTYPE_OUTER_IPV6); 1688 1689 if (ipv4 && 1690 (rx_error & (BIT(I40E_RX_DESC_ERROR_IPE_SHIFT) | 1691 BIT(I40E_RX_DESC_ERROR_EIPE_SHIFT)))) 1692 goto checksum_fail; 1693 1694 /* likely incorrect csum if alternate IP extension headers found */ 1695 if (ipv6 && 1696 rx_status & BIT(I40E_RX_DESC_STATUS_IPV6EXADD_SHIFT)) 1697 /* don't increment checksum err here, non-fatal err */ 1698 return; 1699 1700 /* there was some L4 error, count error and punt packet to the stack */ 1701 if (rx_error & BIT(I40E_RX_DESC_ERROR_L4E_SHIFT)) 1702 goto checksum_fail; 1703 1704 /* handle packets that were not able to be checksummed due 1705 * to arrival speed, in this case the stack can compute 1706 * the csum. 1707 */ 1708 if (rx_error & BIT(I40E_RX_DESC_ERROR_PPRS_SHIFT)) 1709 return; 1710 1711 /* If there is an outer header present that might contain a checksum 1712 * we need to bump the checksum level by 1 to reflect the fact that 1713 * we are indicating we validated the inner checksum. 1714 */ 1715 if (decoded.tunnel_type >= I40E_RX_PTYPE_TUNNEL_IP_GRENAT) 1716 skb->csum_level = 1; 1717 1718 /* Only report checksum unnecessary for TCP, UDP, or SCTP */ 1719 switch (decoded.inner_prot) { 1720 case I40E_RX_PTYPE_INNER_PROT_TCP: 1721 case I40E_RX_PTYPE_INNER_PROT_UDP: 1722 case I40E_RX_PTYPE_INNER_PROT_SCTP: 1723 skb->ip_summed = CHECKSUM_UNNECESSARY; 1724 /* fall though */ 1725 default: 1726 break; 1727 } 1728 1729 return; 1730 1731 checksum_fail: 1732 vsi->back->hw_csum_rx_error++; 1733 } 1734 1735 /** 1736 * i40e_ptype_to_htype - get a hash type 1737 * @ptype: the ptype value from the descriptor 1738 * 1739 * Returns a hash type to be used by skb_set_hash 1740 **/ 1741 static inline int i40e_ptype_to_htype(u8 ptype) 1742 { 1743 struct i40e_rx_ptype_decoded decoded = decode_rx_desc_ptype(ptype); 1744 1745 if (!decoded.known) 1746 return PKT_HASH_TYPE_NONE; 1747 1748 if (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP && 1749 decoded.payload_layer == I40E_RX_PTYPE_PAYLOAD_LAYER_PAY4) 1750 return PKT_HASH_TYPE_L4; 1751 else if (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP && 1752 decoded.payload_layer == I40E_RX_PTYPE_PAYLOAD_LAYER_PAY3) 1753 return PKT_HASH_TYPE_L3; 1754 else 1755 return PKT_HASH_TYPE_L2; 1756 } 1757 1758 /** 1759 * i40e_rx_hash - set the hash value in the skb 1760 * @ring: descriptor ring 1761 * @rx_desc: specific descriptor 1762 * @skb: skb currently being received and modified 1763 * @rx_ptype: Rx packet type 1764 **/ 1765 static inline void i40e_rx_hash(struct i40e_ring *ring, 1766 union i40e_rx_desc *rx_desc, 1767 struct sk_buff *skb, 1768 u8 rx_ptype) 1769 { 1770 u32 hash; 1771 const __le64 rss_mask = 1772 cpu_to_le64((u64)I40E_RX_DESC_FLTSTAT_RSS_HASH << 1773 I40E_RX_DESC_STATUS_FLTSTAT_SHIFT); 1774 1775 if (!(ring->netdev->features & NETIF_F_RXHASH)) 1776 return; 1777 1778 if ((rx_desc->wb.qword1.status_error_len & rss_mask) == rss_mask) { 1779 hash = le32_to_cpu(rx_desc->wb.qword0.hi_dword.rss); 1780 skb_set_hash(skb, hash, i40e_ptype_to_htype(rx_ptype)); 1781 } 1782 } 1783 1784 /** 1785 * i40e_process_skb_fields - Populate skb header fields from Rx descriptor 1786 * @rx_ring: rx descriptor ring packet is being transacted on 1787 * @rx_desc: pointer to the EOP Rx descriptor 1788 * @skb: pointer to current skb being populated 1789 * @rx_ptype: the packet type decoded by hardware 1790 * 1791 * This function checks the ring, descriptor, and packet information in 1792 * order to populate the hash, checksum, VLAN, protocol, and 1793 * other fields within the skb. 1794 **/ 1795 void i40e_process_skb_fields(struct i40e_ring *rx_ring, 1796 union i40e_rx_desc *rx_desc, struct sk_buff *skb, 1797 u8 rx_ptype) 1798 { 1799 u64 qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len); 1800 u32 rx_status = (qword & I40E_RXD_QW1_STATUS_MASK) >> 1801 I40E_RXD_QW1_STATUS_SHIFT; 1802 u32 tsynvalid = rx_status & I40E_RXD_QW1_STATUS_TSYNVALID_MASK; 1803 u32 tsyn = (rx_status & I40E_RXD_QW1_STATUS_TSYNINDX_MASK) >> 1804 I40E_RXD_QW1_STATUS_TSYNINDX_SHIFT; 1805 1806 if (unlikely(tsynvalid)) 1807 i40e_ptp_rx_hwtstamp(rx_ring->vsi->back, skb, tsyn); 1808 1809 i40e_rx_hash(rx_ring, rx_desc, skb, rx_ptype); 1810 1811 i40e_rx_checksum(rx_ring->vsi, skb, rx_desc); 1812 1813 skb_record_rx_queue(skb, rx_ring->queue_index); 1814 1815 /* modifies the skb - consumes the enet header */ 1816 skb->protocol = eth_type_trans(skb, rx_ring->netdev); 1817 } 1818 1819 /** 1820 * i40e_cleanup_headers - Correct empty headers 1821 * @rx_ring: rx descriptor ring packet is being transacted on 1822 * @skb: pointer to current skb being fixed 1823 * @rx_desc: pointer to the EOP Rx descriptor 1824 * 1825 * Also address the case where we are pulling data in on pages only 1826 * and as such no data is present in the skb header. 1827 * 1828 * In addition if skb is not at least 60 bytes we need to pad it so that 1829 * it is large enough to qualify as a valid Ethernet frame. 1830 * 1831 * Returns true if an error was encountered and skb was freed. 1832 **/ 1833 static bool i40e_cleanup_headers(struct i40e_ring *rx_ring, struct sk_buff *skb, 1834 union i40e_rx_desc *rx_desc) 1835 1836 { 1837 /* XDP packets use error pointer so abort at this point */ 1838 if (IS_ERR(skb)) 1839 return true; 1840 1841 /* ERR_MASK will only have valid bits if EOP set, and 1842 * what we are doing here is actually checking 1843 * I40E_RX_DESC_ERROR_RXE_SHIFT, since it is the zeroth bit in 1844 * the error field 1845 */ 1846 if (unlikely(i40e_test_staterr(rx_desc, 1847 BIT(I40E_RXD_QW1_ERROR_SHIFT)))) { 1848 dev_kfree_skb_any(skb); 1849 return true; 1850 } 1851 1852 /* if eth_skb_pad returns an error the skb was freed */ 1853 if (eth_skb_pad(skb)) 1854 return true; 1855 1856 return false; 1857 } 1858 1859 /** 1860 * i40e_page_is_reusable - check if any reuse is possible 1861 * @page: page struct to check 1862 * 1863 * A page is not reusable if it was allocated under low memory 1864 * conditions, or it's not in the same NUMA node as this CPU. 1865 */ 1866 static inline bool i40e_page_is_reusable(struct page *page) 1867 { 1868 return (page_to_nid(page) == numa_mem_id()) && 1869 !page_is_pfmemalloc(page); 1870 } 1871 1872 /** 1873 * i40e_can_reuse_rx_page - Determine if this page can be reused by 1874 * the adapter for another receive 1875 * 1876 * @rx_buffer: buffer containing the page 1877 * 1878 * If page is reusable, rx_buffer->page_offset is adjusted to point to 1879 * an unused region in the page. 1880 * 1881 * For small pages, @truesize will be a constant value, half the size 1882 * of the memory at page. We'll attempt to alternate between high and 1883 * low halves of the page, with one half ready for use by the hardware 1884 * and the other half being consumed by the stack. We use the page 1885 * ref count to determine whether the stack has finished consuming the 1886 * portion of this page that was passed up with a previous packet. If 1887 * the page ref count is >1, we'll assume the "other" half page is 1888 * still busy, and this page cannot be reused. 1889 * 1890 * For larger pages, @truesize will be the actual space used by the 1891 * received packet (adjusted upward to an even multiple of the cache 1892 * line size). This will advance through the page by the amount 1893 * actually consumed by the received packets while there is still 1894 * space for a buffer. Each region of larger pages will be used at 1895 * most once, after which the page will not be reused. 1896 * 1897 * In either case, if the page is reusable its refcount is increased. 1898 **/ 1899 static bool i40e_can_reuse_rx_page(struct i40e_rx_buffer *rx_buffer) 1900 { 1901 unsigned int pagecnt_bias = rx_buffer->pagecnt_bias; 1902 struct page *page = rx_buffer->page; 1903 1904 /* Is any reuse possible? */ 1905 if (unlikely(!i40e_page_is_reusable(page))) 1906 return false; 1907 1908 #if (PAGE_SIZE < 8192) 1909 /* if we are only owner of page we can reuse it */ 1910 if (unlikely((page_count(page) - pagecnt_bias) > 1)) 1911 return false; 1912 #else 1913 #define I40E_LAST_OFFSET \ 1914 (SKB_WITH_OVERHEAD(PAGE_SIZE) - I40E_RXBUFFER_2048) 1915 if (rx_buffer->page_offset > I40E_LAST_OFFSET) 1916 return false; 1917 #endif 1918 1919 /* If we have drained the page fragment pool we need to update 1920 * the pagecnt_bias and page count so that we fully restock the 1921 * number of references the driver holds. 1922 */ 1923 if (unlikely(pagecnt_bias == 1)) { 1924 page_ref_add(page, USHRT_MAX - 1); 1925 rx_buffer->pagecnt_bias = USHRT_MAX; 1926 } 1927 1928 return true; 1929 } 1930 1931 /** 1932 * i40e_add_rx_frag - Add contents of Rx buffer to sk_buff 1933 * @rx_ring: rx descriptor ring to transact packets on 1934 * @rx_buffer: buffer containing page to add 1935 * @skb: sk_buff to place the data into 1936 * @size: packet length from rx_desc 1937 * 1938 * This function will add the data contained in rx_buffer->page to the skb. 1939 * It will just attach the page as a frag to the skb. 1940 * 1941 * The function will then update the page offset. 1942 **/ 1943 static void i40e_add_rx_frag(struct i40e_ring *rx_ring, 1944 struct i40e_rx_buffer *rx_buffer, 1945 struct sk_buff *skb, 1946 unsigned int size) 1947 { 1948 #if (PAGE_SIZE < 8192) 1949 unsigned int truesize = i40e_rx_pg_size(rx_ring) / 2; 1950 #else 1951 unsigned int truesize = SKB_DATA_ALIGN(size + i40e_rx_offset(rx_ring)); 1952 #endif 1953 1954 skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, rx_buffer->page, 1955 rx_buffer->page_offset, size, truesize); 1956 1957 /* page is being used so we must update the page offset */ 1958 #if (PAGE_SIZE < 8192) 1959 rx_buffer->page_offset ^= truesize; 1960 #else 1961 rx_buffer->page_offset += truesize; 1962 #endif 1963 } 1964 1965 /** 1966 * i40e_get_rx_buffer - Fetch Rx buffer and synchronize data for use 1967 * @rx_ring: rx descriptor ring to transact packets on 1968 * @size: size of buffer to add to skb 1969 * 1970 * This function will pull an Rx buffer from the ring and synchronize it 1971 * for use by the CPU. 1972 */ 1973 static struct i40e_rx_buffer *i40e_get_rx_buffer(struct i40e_ring *rx_ring, 1974 const unsigned int size) 1975 { 1976 struct i40e_rx_buffer *rx_buffer; 1977 1978 rx_buffer = &rx_ring->rx_bi[rx_ring->next_to_clean]; 1979 prefetchw(rx_buffer->page); 1980 1981 /* we are reusing so sync this buffer for CPU use */ 1982 dma_sync_single_range_for_cpu(rx_ring->dev, 1983 rx_buffer->dma, 1984 rx_buffer->page_offset, 1985 size, 1986 DMA_FROM_DEVICE); 1987 1988 /* We have pulled a buffer for use, so decrement pagecnt_bias */ 1989 rx_buffer->pagecnt_bias--; 1990 1991 return rx_buffer; 1992 } 1993 1994 /** 1995 * i40e_construct_skb - Allocate skb and populate it 1996 * @rx_ring: rx descriptor ring to transact packets on 1997 * @rx_buffer: rx buffer to pull data from 1998 * @xdp: xdp_buff pointing to the data 1999 * 2000 * This function allocates an skb. It then populates it with the page 2001 * data from the current receive descriptor, taking care to set up the 2002 * skb correctly. 2003 */ 2004 static struct sk_buff *i40e_construct_skb(struct i40e_ring *rx_ring, 2005 struct i40e_rx_buffer *rx_buffer, 2006 struct xdp_buff *xdp) 2007 { 2008 unsigned int size = xdp->data_end - xdp->data; 2009 #if (PAGE_SIZE < 8192) 2010 unsigned int truesize = i40e_rx_pg_size(rx_ring) / 2; 2011 #else 2012 unsigned int truesize = SKB_DATA_ALIGN(size); 2013 #endif 2014 unsigned int headlen; 2015 struct sk_buff *skb; 2016 2017 /* prefetch first cache line of first page */ 2018 prefetch(xdp->data); 2019 #if L1_CACHE_BYTES < 128 2020 prefetch(xdp->data + L1_CACHE_BYTES); 2021 #endif 2022 /* Note, we get here by enabling legacy-rx via: 2023 * 2024 * ethtool --set-priv-flags <dev> legacy-rx on 2025 * 2026 * In this mode, we currently get 0 extra XDP headroom as 2027 * opposed to having legacy-rx off, where we process XDP 2028 * packets going to stack via i40e_build_skb(). The latter 2029 * provides us currently with 192 bytes of headroom. 2030 * 2031 * For i40e_construct_skb() mode it means that the 2032 * xdp->data_meta will always point to xdp->data, since 2033 * the helper cannot expand the head. Should this ever 2034 * change in future for legacy-rx mode on, then lets also 2035 * add xdp->data_meta handling here. 2036 */ 2037 2038 /* allocate a skb to store the frags */ 2039 skb = __napi_alloc_skb(&rx_ring->q_vector->napi, 2040 I40E_RX_HDR_SIZE, 2041 GFP_ATOMIC | __GFP_NOWARN); 2042 if (unlikely(!skb)) 2043 return NULL; 2044 2045 /* Determine available headroom for copy */ 2046 headlen = size; 2047 if (headlen > I40E_RX_HDR_SIZE) 2048 headlen = eth_get_headlen(xdp->data, I40E_RX_HDR_SIZE); 2049 2050 /* align pull length to size of long to optimize memcpy performance */ 2051 memcpy(__skb_put(skb, headlen), xdp->data, 2052 ALIGN(headlen, sizeof(long))); 2053 2054 /* update all of the pointers */ 2055 size -= headlen; 2056 if (size) { 2057 skb_add_rx_frag(skb, 0, rx_buffer->page, 2058 rx_buffer->page_offset + headlen, 2059 size, truesize); 2060 2061 /* buffer is used by skb, update page_offset */ 2062 #if (PAGE_SIZE < 8192) 2063 rx_buffer->page_offset ^= truesize; 2064 #else 2065 rx_buffer->page_offset += truesize; 2066 #endif 2067 } else { 2068 /* buffer is unused, reset bias back to rx_buffer */ 2069 rx_buffer->pagecnt_bias++; 2070 } 2071 2072 return skb; 2073 } 2074 2075 /** 2076 * i40e_build_skb - Build skb around an existing buffer 2077 * @rx_ring: Rx descriptor ring to transact packets on 2078 * @rx_buffer: Rx buffer to pull data from 2079 * @xdp: xdp_buff pointing to the data 2080 * 2081 * This function builds an skb around an existing Rx buffer, taking care 2082 * to set up the skb correctly and avoid any memcpy overhead. 2083 */ 2084 static struct sk_buff *i40e_build_skb(struct i40e_ring *rx_ring, 2085 struct i40e_rx_buffer *rx_buffer, 2086 struct xdp_buff *xdp) 2087 { 2088 unsigned int metasize = xdp->data - xdp->data_meta; 2089 #if (PAGE_SIZE < 8192) 2090 unsigned int truesize = i40e_rx_pg_size(rx_ring) / 2; 2091 #else 2092 unsigned int truesize = SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) + 2093 SKB_DATA_ALIGN(xdp->data_end - 2094 xdp->data_hard_start); 2095 #endif 2096 struct sk_buff *skb; 2097 2098 /* Prefetch first cache line of first page. If xdp->data_meta 2099 * is unused, this points exactly as xdp->data, otherwise we 2100 * likely have a consumer accessing first few bytes of meta 2101 * data, and then actual data. 2102 */ 2103 prefetch(xdp->data_meta); 2104 #if L1_CACHE_BYTES < 128 2105 prefetch(xdp->data_meta + L1_CACHE_BYTES); 2106 #endif 2107 /* build an skb around the page buffer */ 2108 skb = build_skb(xdp->data_hard_start, truesize); 2109 if (unlikely(!skb)) 2110 return NULL; 2111 2112 /* update pointers within the skb to store the data */ 2113 skb_reserve(skb, xdp->data - xdp->data_hard_start); 2114 __skb_put(skb, xdp->data_end - xdp->data); 2115 if (metasize) 2116 skb_metadata_set(skb, metasize); 2117 2118 /* buffer is used by skb, update page_offset */ 2119 #if (PAGE_SIZE < 8192) 2120 rx_buffer->page_offset ^= truesize; 2121 #else 2122 rx_buffer->page_offset += truesize; 2123 #endif 2124 2125 return skb; 2126 } 2127 2128 /** 2129 * i40e_put_rx_buffer - Clean up used buffer and either recycle or free 2130 * @rx_ring: rx descriptor ring to transact packets on 2131 * @rx_buffer: rx buffer to pull data from 2132 * 2133 * This function will clean up the contents of the rx_buffer. It will 2134 * either recycle the buffer or unmap it and free the associated resources. 2135 */ 2136 static void i40e_put_rx_buffer(struct i40e_ring *rx_ring, 2137 struct i40e_rx_buffer *rx_buffer) 2138 { 2139 if (i40e_can_reuse_rx_page(rx_buffer)) { 2140 /* hand second half of page back to the ring */ 2141 i40e_reuse_rx_page(rx_ring, rx_buffer); 2142 } else { 2143 /* we are not reusing the buffer so unmap it */ 2144 dma_unmap_page_attrs(rx_ring->dev, rx_buffer->dma, 2145 i40e_rx_pg_size(rx_ring), 2146 DMA_FROM_DEVICE, I40E_RX_DMA_ATTR); 2147 __page_frag_cache_drain(rx_buffer->page, 2148 rx_buffer->pagecnt_bias); 2149 /* clear contents of buffer_info */ 2150 rx_buffer->page = NULL; 2151 } 2152 } 2153 2154 /** 2155 * i40e_is_non_eop - process handling of non-EOP buffers 2156 * @rx_ring: Rx ring being processed 2157 * @rx_desc: Rx descriptor for current buffer 2158 * @skb: Current socket buffer containing buffer in progress 2159 * 2160 * This function updates next to clean. If the buffer is an EOP buffer 2161 * this function exits returning false, otherwise it will place the 2162 * sk_buff in the next buffer to be chained and return true indicating 2163 * that this is in fact a non-EOP buffer. 2164 **/ 2165 static bool i40e_is_non_eop(struct i40e_ring *rx_ring, 2166 union i40e_rx_desc *rx_desc, 2167 struct sk_buff *skb) 2168 { 2169 u32 ntc = rx_ring->next_to_clean + 1; 2170 2171 /* fetch, update, and store next to clean */ 2172 ntc = (ntc < rx_ring->count) ? ntc : 0; 2173 rx_ring->next_to_clean = ntc; 2174 2175 prefetch(I40E_RX_DESC(rx_ring, ntc)); 2176 2177 /* if we are the last buffer then there is nothing else to do */ 2178 #define I40E_RXD_EOF BIT(I40E_RX_DESC_STATUS_EOF_SHIFT) 2179 if (likely(i40e_test_staterr(rx_desc, I40E_RXD_EOF))) 2180 return false; 2181 2182 rx_ring->rx_stats.non_eop_descs++; 2183 2184 return true; 2185 } 2186 2187 static int i40e_xmit_xdp_ring(struct xdp_frame *xdpf, 2188 struct i40e_ring *xdp_ring); 2189 2190 int i40e_xmit_xdp_tx_ring(struct xdp_buff *xdp, struct i40e_ring *xdp_ring) 2191 { 2192 struct xdp_frame *xdpf = convert_to_xdp_frame(xdp); 2193 2194 if (unlikely(!xdpf)) 2195 return I40E_XDP_CONSUMED; 2196 2197 return i40e_xmit_xdp_ring(xdpf, xdp_ring); 2198 } 2199 2200 /** 2201 * i40e_run_xdp - run an XDP program 2202 * @rx_ring: Rx ring being processed 2203 * @xdp: XDP buffer containing the frame 2204 **/ 2205 static struct sk_buff *i40e_run_xdp(struct i40e_ring *rx_ring, 2206 struct xdp_buff *xdp) 2207 { 2208 int err, result = I40E_XDP_PASS; 2209 struct i40e_ring *xdp_ring; 2210 struct bpf_prog *xdp_prog; 2211 u32 act; 2212 2213 rcu_read_lock(); 2214 xdp_prog = READ_ONCE(rx_ring->xdp_prog); 2215 2216 if (!xdp_prog) 2217 goto xdp_out; 2218 2219 prefetchw(xdp->data_hard_start); /* xdp_frame write */ 2220 2221 act = bpf_prog_run_xdp(xdp_prog, xdp); 2222 switch (act) { 2223 case XDP_PASS: 2224 break; 2225 case XDP_TX: 2226 xdp_ring = rx_ring->vsi->xdp_rings[rx_ring->queue_index]; 2227 result = i40e_xmit_xdp_tx_ring(xdp, xdp_ring); 2228 break; 2229 case XDP_REDIRECT: 2230 err = xdp_do_redirect(rx_ring->netdev, xdp, xdp_prog); 2231 result = !err ? I40E_XDP_REDIR : I40E_XDP_CONSUMED; 2232 break; 2233 default: 2234 bpf_warn_invalid_xdp_action(act); 2235 /* fall through */ 2236 case XDP_ABORTED: 2237 trace_xdp_exception(rx_ring->netdev, xdp_prog, act); 2238 /* fall through -- handle aborts by dropping packet */ 2239 case XDP_DROP: 2240 result = I40E_XDP_CONSUMED; 2241 break; 2242 } 2243 xdp_out: 2244 rcu_read_unlock(); 2245 return ERR_PTR(-result); 2246 } 2247 2248 /** 2249 * i40e_rx_buffer_flip - adjusted rx_buffer to point to an unused region 2250 * @rx_ring: Rx ring 2251 * @rx_buffer: Rx buffer to adjust 2252 * @size: Size of adjustment 2253 **/ 2254 static void i40e_rx_buffer_flip(struct i40e_ring *rx_ring, 2255 struct i40e_rx_buffer *rx_buffer, 2256 unsigned int size) 2257 { 2258 #if (PAGE_SIZE < 8192) 2259 unsigned int truesize = i40e_rx_pg_size(rx_ring) / 2; 2260 2261 rx_buffer->page_offset ^= truesize; 2262 #else 2263 unsigned int truesize = SKB_DATA_ALIGN(i40e_rx_offset(rx_ring) + size); 2264 2265 rx_buffer->page_offset += truesize; 2266 #endif 2267 } 2268 2269 /** 2270 * i40e_xdp_ring_update_tail - Updates the XDP Tx ring tail register 2271 * @xdp_ring: XDP Tx ring 2272 * 2273 * This function updates the XDP Tx ring tail register. 2274 **/ 2275 void i40e_xdp_ring_update_tail(struct i40e_ring *xdp_ring) 2276 { 2277 /* Force memory writes to complete before letting h/w 2278 * know there are new descriptors to fetch. 2279 */ 2280 wmb(); 2281 writel_relaxed(xdp_ring->next_to_use, xdp_ring->tail); 2282 } 2283 2284 /** 2285 * i40e_update_rx_stats - Update Rx ring statistics 2286 * @rx_ring: rx descriptor ring 2287 * @total_rx_bytes: number of bytes received 2288 * @total_rx_packets: number of packets received 2289 * 2290 * This function updates the Rx ring statistics. 2291 **/ 2292 void i40e_update_rx_stats(struct i40e_ring *rx_ring, 2293 unsigned int total_rx_bytes, 2294 unsigned int total_rx_packets) 2295 { 2296 u64_stats_update_begin(&rx_ring->syncp); 2297 rx_ring->stats.packets += total_rx_packets; 2298 rx_ring->stats.bytes += total_rx_bytes; 2299 u64_stats_update_end(&rx_ring->syncp); 2300 rx_ring->q_vector->rx.total_packets += total_rx_packets; 2301 rx_ring->q_vector->rx.total_bytes += total_rx_bytes; 2302 } 2303 2304 /** 2305 * i40e_finalize_xdp_rx - Bump XDP Tx tail and/or flush redirect map 2306 * @rx_ring: Rx ring 2307 * @xdp_res: Result of the receive batch 2308 * 2309 * This function bumps XDP Tx tail and/or flush redirect map, and 2310 * should be called when a batch of packets has been processed in the 2311 * napi loop. 2312 **/ 2313 void i40e_finalize_xdp_rx(struct i40e_ring *rx_ring, unsigned int xdp_res) 2314 { 2315 if (xdp_res & I40E_XDP_REDIR) 2316 xdp_do_flush_map(); 2317 2318 if (xdp_res & I40E_XDP_TX) { 2319 struct i40e_ring *xdp_ring = 2320 rx_ring->vsi->xdp_rings[rx_ring->queue_index]; 2321 2322 i40e_xdp_ring_update_tail(xdp_ring); 2323 } 2324 } 2325 2326 /** 2327 * i40e_clean_rx_irq - Clean completed descriptors from Rx ring - bounce buf 2328 * @rx_ring: rx descriptor ring to transact packets on 2329 * @budget: Total limit on number of packets to process 2330 * 2331 * This function provides a "bounce buffer" approach to Rx interrupt 2332 * processing. The advantage to this is that on systems that have 2333 * expensive overhead for IOMMU access this provides a means of avoiding 2334 * it by maintaining the mapping of the page to the system. 2335 * 2336 * Returns amount of work completed 2337 **/ 2338 static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget) 2339 { 2340 unsigned int total_rx_bytes = 0, total_rx_packets = 0; 2341 struct sk_buff *skb = rx_ring->skb; 2342 u16 cleaned_count = I40E_DESC_UNUSED(rx_ring); 2343 unsigned int xdp_xmit = 0; 2344 bool failure = false; 2345 struct xdp_buff xdp; 2346 2347 xdp.rxq = &rx_ring->xdp_rxq; 2348 2349 while (likely(total_rx_packets < (unsigned int)budget)) { 2350 struct i40e_rx_buffer *rx_buffer; 2351 union i40e_rx_desc *rx_desc; 2352 unsigned int size; 2353 u16 vlan_tag; 2354 u8 rx_ptype; 2355 u64 qword; 2356 2357 /* return some buffers to hardware, one at a time is too slow */ 2358 if (cleaned_count >= I40E_RX_BUFFER_WRITE) { 2359 failure = failure || 2360 i40e_alloc_rx_buffers(rx_ring, cleaned_count); 2361 cleaned_count = 0; 2362 } 2363 2364 rx_desc = I40E_RX_DESC(rx_ring, rx_ring->next_to_clean); 2365 2366 /* status_error_len will always be zero for unused descriptors 2367 * because it's cleared in cleanup, and overlaps with hdr_addr 2368 * which is always zero because packet split isn't used, if the 2369 * hardware wrote DD then the length will be non-zero 2370 */ 2371 qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len); 2372 2373 /* This memory barrier is needed to keep us from reading 2374 * any other fields out of the rx_desc until we have 2375 * verified the descriptor has been written back. 2376 */ 2377 dma_rmb(); 2378 2379 rx_buffer = i40e_clean_programming_status(rx_ring, rx_desc, 2380 qword); 2381 if (unlikely(rx_buffer)) { 2382 i40e_reuse_rx_page(rx_ring, rx_buffer); 2383 cleaned_count++; 2384 continue; 2385 } 2386 2387 size = (qword & I40E_RXD_QW1_LENGTH_PBUF_MASK) >> 2388 I40E_RXD_QW1_LENGTH_PBUF_SHIFT; 2389 if (!size) 2390 break; 2391 2392 i40e_trace(clean_rx_irq, rx_ring, rx_desc, skb); 2393 rx_buffer = i40e_get_rx_buffer(rx_ring, size); 2394 2395 /* retrieve a buffer from the ring */ 2396 if (!skb) { 2397 xdp.data = page_address(rx_buffer->page) + 2398 rx_buffer->page_offset; 2399 xdp.data_meta = xdp.data; 2400 xdp.data_hard_start = xdp.data - 2401 i40e_rx_offset(rx_ring); 2402 xdp.data_end = xdp.data + size; 2403 2404 skb = i40e_run_xdp(rx_ring, &xdp); 2405 } 2406 2407 if (IS_ERR(skb)) { 2408 unsigned int xdp_res = -PTR_ERR(skb); 2409 2410 if (xdp_res & (I40E_XDP_TX | I40E_XDP_REDIR)) { 2411 xdp_xmit |= xdp_res; 2412 i40e_rx_buffer_flip(rx_ring, rx_buffer, size); 2413 } else { 2414 rx_buffer->pagecnt_bias++; 2415 } 2416 total_rx_bytes += size; 2417 total_rx_packets++; 2418 } else if (skb) { 2419 i40e_add_rx_frag(rx_ring, rx_buffer, skb, size); 2420 } else if (ring_uses_build_skb(rx_ring)) { 2421 skb = i40e_build_skb(rx_ring, rx_buffer, &xdp); 2422 } else { 2423 skb = i40e_construct_skb(rx_ring, rx_buffer, &xdp); 2424 } 2425 2426 /* exit if we failed to retrieve a buffer */ 2427 if (!skb) { 2428 rx_ring->rx_stats.alloc_buff_failed++; 2429 rx_buffer->pagecnt_bias++; 2430 break; 2431 } 2432 2433 i40e_put_rx_buffer(rx_ring, rx_buffer); 2434 cleaned_count++; 2435 2436 if (i40e_is_non_eop(rx_ring, rx_desc, skb)) 2437 continue; 2438 2439 if (i40e_cleanup_headers(rx_ring, skb, rx_desc)) { 2440 skb = NULL; 2441 continue; 2442 } 2443 2444 /* probably a little skewed due to removing CRC */ 2445 total_rx_bytes += skb->len; 2446 2447 qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len); 2448 rx_ptype = (qword & I40E_RXD_QW1_PTYPE_MASK) >> 2449 I40E_RXD_QW1_PTYPE_SHIFT; 2450 2451 /* populate checksum, VLAN, and protocol */ 2452 i40e_process_skb_fields(rx_ring, rx_desc, skb, rx_ptype); 2453 2454 vlan_tag = (qword & BIT(I40E_RX_DESC_STATUS_L2TAG1P_SHIFT)) ? 2455 le16_to_cpu(rx_desc->wb.qword0.lo_dword.l2tag1) : 0; 2456 2457 i40e_trace(clean_rx_irq_rx, rx_ring, rx_desc, skb); 2458 i40e_receive_skb(rx_ring, skb, vlan_tag); 2459 skb = NULL; 2460 2461 /* update budget accounting */ 2462 total_rx_packets++; 2463 } 2464 2465 i40e_finalize_xdp_rx(rx_ring, xdp_xmit); 2466 rx_ring->skb = skb; 2467 2468 i40e_update_rx_stats(rx_ring, total_rx_bytes, total_rx_packets); 2469 2470 /* guarantee a trip back through this routine if there was a failure */ 2471 return failure ? budget : (int)total_rx_packets; 2472 } 2473 2474 static inline u32 i40e_buildreg_itr(const int type, u16 itr) 2475 { 2476 u32 val; 2477 2478 /* We don't bother with setting the CLEARPBA bit as the data sheet 2479 * points out doing so is "meaningless since it was already 2480 * auto-cleared". The auto-clearing happens when the interrupt is 2481 * asserted. 2482 * 2483 * Hardware errata 28 for also indicates that writing to a 2484 * xxINT_DYN_CTLx CSR with INTENA_MSK (bit 31) set to 0 will clear 2485 * an event in the PBA anyway so we need to rely on the automask 2486 * to hold pending events for us until the interrupt is re-enabled 2487 * 2488 * The itr value is reported in microseconds, and the register 2489 * value is recorded in 2 microsecond units. For this reason we 2490 * only need to shift by the interval shift - 1 instead of the 2491 * full value. 2492 */ 2493 itr &= I40E_ITR_MASK; 2494 2495 val = I40E_PFINT_DYN_CTLN_INTENA_MASK | 2496 (type << I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT) | 2497 (itr << (I40E_PFINT_DYN_CTLN_INTERVAL_SHIFT - 1)); 2498 2499 return val; 2500 } 2501 2502 /* a small macro to shorten up some long lines */ 2503 #define INTREG I40E_PFINT_DYN_CTLN 2504 2505 /* The act of updating the ITR will cause it to immediately trigger. In order 2506 * to prevent this from throwing off adaptive update statistics we defer the 2507 * update so that it can only happen so often. So after either Tx or Rx are 2508 * updated we make the adaptive scheme wait until either the ITR completely 2509 * expires via the next_update expiration or we have been through at least 2510 * 3 interrupts. 2511 */ 2512 #define ITR_COUNTDOWN_START 3 2513 2514 /** 2515 * i40e_update_enable_itr - Update itr and re-enable MSIX interrupt 2516 * @vsi: the VSI we care about 2517 * @q_vector: q_vector for which itr is being updated and interrupt enabled 2518 * 2519 **/ 2520 static inline void i40e_update_enable_itr(struct i40e_vsi *vsi, 2521 struct i40e_q_vector *q_vector) 2522 { 2523 struct i40e_hw *hw = &vsi->back->hw; 2524 u32 intval; 2525 2526 /* If we don't have MSIX, then we only need to re-enable icr0 */ 2527 if (!(vsi->back->flags & I40E_FLAG_MSIX_ENABLED)) { 2528 i40e_irq_dynamic_enable_icr0(vsi->back); 2529 return; 2530 } 2531 2532 /* These will do nothing if dynamic updates are not enabled */ 2533 i40e_update_itr(q_vector, &q_vector->tx); 2534 i40e_update_itr(q_vector, &q_vector->rx); 2535 2536 /* This block of logic allows us to get away with only updating 2537 * one ITR value with each interrupt. The idea is to perform a 2538 * pseudo-lazy update with the following criteria. 2539 * 2540 * 1. Rx is given higher priority than Tx if both are in same state 2541 * 2. If we must reduce an ITR that is given highest priority. 2542 * 3. We then give priority to increasing ITR based on amount. 2543 */ 2544 if (q_vector->rx.target_itr < q_vector->rx.current_itr) { 2545 /* Rx ITR needs to be reduced, this is highest priority */ 2546 intval = i40e_buildreg_itr(I40E_RX_ITR, 2547 q_vector->rx.target_itr); 2548 q_vector->rx.current_itr = q_vector->rx.target_itr; 2549 q_vector->itr_countdown = ITR_COUNTDOWN_START; 2550 } else if ((q_vector->tx.target_itr < q_vector->tx.current_itr) || 2551 ((q_vector->rx.target_itr - q_vector->rx.current_itr) < 2552 (q_vector->tx.target_itr - q_vector->tx.current_itr))) { 2553 /* Tx ITR needs to be reduced, this is second priority 2554 * Tx ITR needs to be increased more than Rx, fourth priority 2555 */ 2556 intval = i40e_buildreg_itr(I40E_TX_ITR, 2557 q_vector->tx.target_itr); 2558 q_vector->tx.current_itr = q_vector->tx.target_itr; 2559 q_vector->itr_countdown = ITR_COUNTDOWN_START; 2560 } else if (q_vector->rx.current_itr != q_vector->rx.target_itr) { 2561 /* Rx ITR needs to be increased, third priority */ 2562 intval = i40e_buildreg_itr(I40E_RX_ITR, 2563 q_vector->rx.target_itr); 2564 q_vector->rx.current_itr = q_vector->rx.target_itr; 2565 q_vector->itr_countdown = ITR_COUNTDOWN_START; 2566 } else { 2567 /* No ITR update, lowest priority */ 2568 intval = i40e_buildreg_itr(I40E_ITR_NONE, 0); 2569 if (q_vector->itr_countdown) 2570 q_vector->itr_countdown--; 2571 } 2572 2573 if (!test_bit(__I40E_VSI_DOWN, vsi->state)) 2574 wr32(hw, INTREG(q_vector->reg_idx), intval); 2575 } 2576 2577 /** 2578 * i40e_napi_poll - NAPI polling Rx/Tx cleanup routine 2579 * @napi: napi struct with our devices info in it 2580 * @budget: amount of work driver is allowed to do this pass, in packets 2581 * 2582 * This function will clean all queues associated with a q_vector. 2583 * 2584 * Returns the amount of work done 2585 **/ 2586 int i40e_napi_poll(struct napi_struct *napi, int budget) 2587 { 2588 struct i40e_q_vector *q_vector = 2589 container_of(napi, struct i40e_q_vector, napi); 2590 struct i40e_vsi *vsi = q_vector->vsi; 2591 struct i40e_ring *ring; 2592 bool clean_complete = true; 2593 bool arm_wb = false; 2594 int budget_per_ring; 2595 int work_done = 0; 2596 2597 if (test_bit(__I40E_VSI_DOWN, vsi->state)) { 2598 napi_complete(napi); 2599 return 0; 2600 } 2601 2602 /* Since the actual Tx work is minimal, we can give the Tx a larger 2603 * budget and be more aggressive about cleaning up the Tx descriptors. 2604 */ 2605 i40e_for_each_ring(ring, q_vector->tx) { 2606 bool wd = ring->xsk_umem ? 2607 i40e_clean_xdp_tx_irq(vsi, ring, budget) : 2608 i40e_clean_tx_irq(vsi, ring, budget); 2609 2610 if (!wd) { 2611 clean_complete = false; 2612 continue; 2613 } 2614 arm_wb |= ring->arm_wb; 2615 ring->arm_wb = false; 2616 } 2617 2618 /* Handle case where we are called by netpoll with a budget of 0 */ 2619 if (budget <= 0) 2620 goto tx_only; 2621 2622 /* We attempt to distribute budget to each Rx queue fairly, but don't 2623 * allow the budget to go below 1 because that would exit polling early. 2624 */ 2625 budget_per_ring = max(budget/q_vector->num_ringpairs, 1); 2626 2627 i40e_for_each_ring(ring, q_vector->rx) { 2628 int cleaned = ring->xsk_umem ? 2629 i40e_clean_rx_irq_zc(ring, budget_per_ring) : 2630 i40e_clean_rx_irq(ring, budget_per_ring); 2631 2632 work_done += cleaned; 2633 /* if we clean as many as budgeted, we must not be done */ 2634 if (cleaned >= budget_per_ring) 2635 clean_complete = false; 2636 } 2637 2638 /* If work not completed, return budget and polling will return */ 2639 if (!clean_complete) { 2640 int cpu_id = smp_processor_id(); 2641 2642 /* It is possible that the interrupt affinity has changed but, 2643 * if the cpu is pegged at 100%, polling will never exit while 2644 * traffic continues and the interrupt will be stuck on this 2645 * cpu. We check to make sure affinity is correct before we 2646 * continue to poll, otherwise we must stop polling so the 2647 * interrupt can move to the correct cpu. 2648 */ 2649 if (!cpumask_test_cpu(cpu_id, &q_vector->affinity_mask)) { 2650 /* Tell napi that we are done polling */ 2651 napi_complete_done(napi, work_done); 2652 2653 /* Force an interrupt */ 2654 i40e_force_wb(vsi, q_vector); 2655 2656 /* Return budget-1 so that polling stops */ 2657 return budget - 1; 2658 } 2659 tx_only: 2660 if (arm_wb) { 2661 q_vector->tx.ring[0].tx_stats.tx_force_wb++; 2662 i40e_enable_wb_on_itr(vsi, q_vector); 2663 } 2664 return budget; 2665 } 2666 2667 if (vsi->back->flags & I40E_TXR_FLAGS_WB_ON_ITR) 2668 q_vector->arm_wb_state = false; 2669 2670 /* Exit the polling mode, but don't re-enable interrupts if stack might 2671 * poll us due to busy-polling 2672 */ 2673 if (likely(napi_complete_done(napi, work_done))) 2674 i40e_update_enable_itr(vsi, q_vector); 2675 2676 return min(work_done, budget - 1); 2677 } 2678 2679 /** 2680 * i40e_atr - Add a Flow Director ATR filter 2681 * @tx_ring: ring to add programming descriptor to 2682 * @skb: send buffer 2683 * @tx_flags: send tx flags 2684 **/ 2685 static void i40e_atr(struct i40e_ring *tx_ring, struct sk_buff *skb, 2686 u32 tx_flags) 2687 { 2688 struct i40e_filter_program_desc *fdir_desc; 2689 struct i40e_pf *pf = tx_ring->vsi->back; 2690 union { 2691 unsigned char *network; 2692 struct iphdr *ipv4; 2693 struct ipv6hdr *ipv6; 2694 } hdr; 2695 struct tcphdr *th; 2696 unsigned int hlen; 2697 u32 flex_ptype, dtype_cmd; 2698 int l4_proto; 2699 u16 i; 2700 2701 /* make sure ATR is enabled */ 2702 if (!(pf->flags & I40E_FLAG_FD_ATR_ENABLED)) 2703 return; 2704 2705 if (test_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state)) 2706 return; 2707 2708 /* if sampling is disabled do nothing */ 2709 if (!tx_ring->atr_sample_rate) 2710 return; 2711 2712 /* Currently only IPv4/IPv6 with TCP is supported */ 2713 if (!(tx_flags & (I40E_TX_FLAGS_IPV4 | I40E_TX_FLAGS_IPV6))) 2714 return; 2715 2716 /* snag network header to get L4 type and address */ 2717 hdr.network = (tx_flags & I40E_TX_FLAGS_UDP_TUNNEL) ? 2718 skb_inner_network_header(skb) : skb_network_header(skb); 2719 2720 /* Note: tx_flags gets modified to reflect inner protocols in 2721 * tx_enable_csum function if encap is enabled. 2722 */ 2723 if (tx_flags & I40E_TX_FLAGS_IPV4) { 2724 /* access ihl as u8 to avoid unaligned access on ia64 */ 2725 hlen = (hdr.network[0] & 0x0F) << 2; 2726 l4_proto = hdr.ipv4->protocol; 2727 } else { 2728 /* find the start of the innermost ipv6 header */ 2729 unsigned int inner_hlen = hdr.network - skb->data; 2730 unsigned int h_offset = inner_hlen; 2731 2732 /* this function updates h_offset to the end of the header */ 2733 l4_proto = 2734 ipv6_find_hdr(skb, &h_offset, IPPROTO_TCP, NULL, NULL); 2735 /* hlen will contain our best estimate of the tcp header */ 2736 hlen = h_offset - inner_hlen; 2737 } 2738 2739 if (l4_proto != IPPROTO_TCP) 2740 return; 2741 2742 th = (struct tcphdr *)(hdr.network + hlen); 2743 2744 /* Due to lack of space, no more new filters can be programmed */ 2745 if (th->syn && test_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state)) 2746 return; 2747 if (pf->flags & I40E_FLAG_HW_ATR_EVICT_ENABLED) { 2748 /* HW ATR eviction will take care of removing filters on FIN 2749 * and RST packets. 2750 */ 2751 if (th->fin || th->rst) 2752 return; 2753 } 2754 2755 tx_ring->atr_count++; 2756 2757 /* sample on all syn/fin/rst packets or once every atr sample rate */ 2758 if (!th->fin && 2759 !th->syn && 2760 !th->rst && 2761 (tx_ring->atr_count < tx_ring->atr_sample_rate)) 2762 return; 2763 2764 tx_ring->atr_count = 0; 2765 2766 /* grab the next descriptor */ 2767 i = tx_ring->next_to_use; 2768 fdir_desc = I40E_TX_FDIRDESC(tx_ring, i); 2769 2770 i++; 2771 tx_ring->next_to_use = (i < tx_ring->count) ? i : 0; 2772 2773 flex_ptype = (tx_ring->queue_index << I40E_TXD_FLTR_QW0_QINDEX_SHIFT) & 2774 I40E_TXD_FLTR_QW0_QINDEX_MASK; 2775 flex_ptype |= (tx_flags & I40E_TX_FLAGS_IPV4) ? 2776 (I40E_FILTER_PCTYPE_NONF_IPV4_TCP << 2777 I40E_TXD_FLTR_QW0_PCTYPE_SHIFT) : 2778 (I40E_FILTER_PCTYPE_NONF_IPV6_TCP << 2779 I40E_TXD_FLTR_QW0_PCTYPE_SHIFT); 2780 2781 flex_ptype |= tx_ring->vsi->id << I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT; 2782 2783 dtype_cmd = I40E_TX_DESC_DTYPE_FILTER_PROG; 2784 2785 dtype_cmd |= (th->fin || th->rst) ? 2786 (I40E_FILTER_PROGRAM_DESC_PCMD_REMOVE << 2787 I40E_TXD_FLTR_QW1_PCMD_SHIFT) : 2788 (I40E_FILTER_PROGRAM_DESC_PCMD_ADD_UPDATE << 2789 I40E_TXD_FLTR_QW1_PCMD_SHIFT); 2790 2791 dtype_cmd |= I40E_FILTER_PROGRAM_DESC_DEST_DIRECT_PACKET_QINDEX << 2792 I40E_TXD_FLTR_QW1_DEST_SHIFT; 2793 2794 dtype_cmd |= I40E_FILTER_PROGRAM_DESC_FD_STATUS_FD_ID << 2795 I40E_TXD_FLTR_QW1_FD_STATUS_SHIFT; 2796 2797 dtype_cmd |= I40E_TXD_FLTR_QW1_CNT_ENA_MASK; 2798 if (!(tx_flags & I40E_TX_FLAGS_UDP_TUNNEL)) 2799 dtype_cmd |= 2800 ((u32)I40E_FD_ATR_STAT_IDX(pf->hw.pf_id) << 2801 I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT) & 2802 I40E_TXD_FLTR_QW1_CNTINDEX_MASK; 2803 else 2804 dtype_cmd |= 2805 ((u32)I40E_FD_ATR_TUNNEL_STAT_IDX(pf->hw.pf_id) << 2806 I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT) & 2807 I40E_TXD_FLTR_QW1_CNTINDEX_MASK; 2808 2809 if (pf->flags & I40E_FLAG_HW_ATR_EVICT_ENABLED) 2810 dtype_cmd |= I40E_TXD_FLTR_QW1_ATR_MASK; 2811 2812 fdir_desc->qindex_flex_ptype_vsi = cpu_to_le32(flex_ptype); 2813 fdir_desc->rsvd = cpu_to_le32(0); 2814 fdir_desc->dtype_cmd_cntindex = cpu_to_le32(dtype_cmd); 2815 fdir_desc->fd_id = cpu_to_le32(0); 2816 } 2817 2818 /** 2819 * i40e_tx_prepare_vlan_flags - prepare generic TX VLAN tagging flags for HW 2820 * @skb: send buffer 2821 * @tx_ring: ring to send buffer on 2822 * @flags: the tx flags to be set 2823 * 2824 * Checks the skb and set up correspondingly several generic transmit flags 2825 * related to VLAN tagging for the HW, such as VLAN, DCB, etc. 2826 * 2827 * Returns error code indicate the frame should be dropped upon error and the 2828 * otherwise returns 0 to indicate the flags has been set properly. 2829 **/ 2830 static inline int i40e_tx_prepare_vlan_flags(struct sk_buff *skb, 2831 struct i40e_ring *tx_ring, 2832 u32 *flags) 2833 { 2834 __be16 protocol = skb->protocol; 2835 u32 tx_flags = 0; 2836 2837 if (protocol == htons(ETH_P_8021Q) && 2838 !(tx_ring->netdev->features & NETIF_F_HW_VLAN_CTAG_TX)) { 2839 /* When HW VLAN acceleration is turned off by the user the 2840 * stack sets the protocol to 8021q so that the driver 2841 * can take any steps required to support the SW only 2842 * VLAN handling. In our case the driver doesn't need 2843 * to take any further steps so just set the protocol 2844 * to the encapsulated ethertype. 2845 */ 2846 skb->protocol = vlan_get_protocol(skb); 2847 goto out; 2848 } 2849 2850 /* if we have a HW VLAN tag being added, default to the HW one */ 2851 if (skb_vlan_tag_present(skb)) { 2852 tx_flags |= skb_vlan_tag_get(skb) << I40E_TX_FLAGS_VLAN_SHIFT; 2853 tx_flags |= I40E_TX_FLAGS_HW_VLAN; 2854 /* else if it is a SW VLAN, check the next protocol and store the tag */ 2855 } else if (protocol == htons(ETH_P_8021Q)) { 2856 struct vlan_hdr *vhdr, _vhdr; 2857 2858 vhdr = skb_header_pointer(skb, ETH_HLEN, sizeof(_vhdr), &_vhdr); 2859 if (!vhdr) 2860 return -EINVAL; 2861 2862 protocol = vhdr->h_vlan_encapsulated_proto; 2863 tx_flags |= ntohs(vhdr->h_vlan_TCI) << I40E_TX_FLAGS_VLAN_SHIFT; 2864 tx_flags |= I40E_TX_FLAGS_SW_VLAN; 2865 } 2866 2867 if (!(tx_ring->vsi->back->flags & I40E_FLAG_DCB_ENABLED)) 2868 goto out; 2869 2870 /* Insert 802.1p priority into VLAN header */ 2871 if ((tx_flags & (I40E_TX_FLAGS_HW_VLAN | I40E_TX_FLAGS_SW_VLAN)) || 2872 (skb->priority != TC_PRIO_CONTROL)) { 2873 tx_flags &= ~I40E_TX_FLAGS_VLAN_PRIO_MASK; 2874 tx_flags |= (skb->priority & 0x7) << 2875 I40E_TX_FLAGS_VLAN_PRIO_SHIFT; 2876 if (tx_flags & I40E_TX_FLAGS_SW_VLAN) { 2877 struct vlan_ethhdr *vhdr; 2878 int rc; 2879 2880 rc = skb_cow_head(skb, 0); 2881 if (rc < 0) 2882 return rc; 2883 vhdr = (struct vlan_ethhdr *)skb->data; 2884 vhdr->h_vlan_TCI = htons(tx_flags >> 2885 I40E_TX_FLAGS_VLAN_SHIFT); 2886 } else { 2887 tx_flags |= I40E_TX_FLAGS_HW_VLAN; 2888 } 2889 } 2890 2891 out: 2892 *flags = tx_flags; 2893 return 0; 2894 } 2895 2896 /** 2897 * i40e_tso - set up the tso context descriptor 2898 * @first: pointer to first Tx buffer for xmit 2899 * @hdr_len: ptr to the size of the packet header 2900 * @cd_type_cmd_tso_mss: Quad Word 1 2901 * 2902 * Returns 0 if no TSO can happen, 1 if tso is going, or error 2903 **/ 2904 static int i40e_tso(struct i40e_tx_buffer *first, u8 *hdr_len, 2905 u64 *cd_type_cmd_tso_mss) 2906 { 2907 struct sk_buff *skb = first->skb; 2908 u64 cd_cmd, cd_tso_len, cd_mss; 2909 union { 2910 struct iphdr *v4; 2911 struct ipv6hdr *v6; 2912 unsigned char *hdr; 2913 } ip; 2914 union { 2915 struct tcphdr *tcp; 2916 struct udphdr *udp; 2917 unsigned char *hdr; 2918 } l4; 2919 u32 paylen, l4_offset; 2920 u16 gso_segs, gso_size; 2921 int err; 2922 2923 if (skb->ip_summed != CHECKSUM_PARTIAL) 2924 return 0; 2925 2926 if (!skb_is_gso(skb)) 2927 return 0; 2928 2929 err = skb_cow_head(skb, 0); 2930 if (err < 0) 2931 return err; 2932 2933 ip.hdr = skb_network_header(skb); 2934 l4.hdr = skb_transport_header(skb); 2935 2936 /* initialize outer IP header fields */ 2937 if (ip.v4->version == 4) { 2938 ip.v4->tot_len = 0; 2939 ip.v4->check = 0; 2940 } else { 2941 ip.v6->payload_len = 0; 2942 } 2943 2944 if (skb_shinfo(skb)->gso_type & (SKB_GSO_GRE | 2945 SKB_GSO_GRE_CSUM | 2946 SKB_GSO_IPXIP4 | 2947 SKB_GSO_IPXIP6 | 2948 SKB_GSO_UDP_TUNNEL | 2949 SKB_GSO_UDP_TUNNEL_CSUM)) { 2950 if (!(skb_shinfo(skb)->gso_type & SKB_GSO_PARTIAL) && 2951 (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL_CSUM)) { 2952 l4.udp->len = 0; 2953 2954 /* determine offset of outer transport header */ 2955 l4_offset = l4.hdr - skb->data; 2956 2957 /* remove payload length from outer checksum */ 2958 paylen = skb->len - l4_offset; 2959 csum_replace_by_diff(&l4.udp->check, 2960 (__force __wsum)htonl(paylen)); 2961 } 2962 2963 /* reset pointers to inner headers */ 2964 ip.hdr = skb_inner_network_header(skb); 2965 l4.hdr = skb_inner_transport_header(skb); 2966 2967 /* initialize inner IP header fields */ 2968 if (ip.v4->version == 4) { 2969 ip.v4->tot_len = 0; 2970 ip.v4->check = 0; 2971 } else { 2972 ip.v6->payload_len = 0; 2973 } 2974 } 2975 2976 /* determine offset of inner transport header */ 2977 l4_offset = l4.hdr - skb->data; 2978 2979 /* remove payload length from inner checksum */ 2980 paylen = skb->len - l4_offset; 2981 csum_replace_by_diff(&l4.tcp->check, (__force __wsum)htonl(paylen)); 2982 2983 /* compute length of segmentation header */ 2984 *hdr_len = (l4.tcp->doff * 4) + l4_offset; 2985 2986 /* pull values out of skb_shinfo */ 2987 gso_size = skb_shinfo(skb)->gso_size; 2988 gso_segs = skb_shinfo(skb)->gso_segs; 2989 2990 /* update GSO size and bytecount with header size */ 2991 first->gso_segs = gso_segs; 2992 first->bytecount += (first->gso_segs - 1) * *hdr_len; 2993 2994 /* find the field values */ 2995 cd_cmd = I40E_TX_CTX_DESC_TSO; 2996 cd_tso_len = skb->len - *hdr_len; 2997 cd_mss = gso_size; 2998 *cd_type_cmd_tso_mss |= (cd_cmd << I40E_TXD_CTX_QW1_CMD_SHIFT) | 2999 (cd_tso_len << I40E_TXD_CTX_QW1_TSO_LEN_SHIFT) | 3000 (cd_mss << I40E_TXD_CTX_QW1_MSS_SHIFT); 3001 return 1; 3002 } 3003 3004 /** 3005 * i40e_tsyn - set up the tsyn context descriptor 3006 * @tx_ring: ptr to the ring to send 3007 * @skb: ptr to the skb we're sending 3008 * @tx_flags: the collected send information 3009 * @cd_type_cmd_tso_mss: Quad Word 1 3010 * 3011 * Returns 0 if no Tx timestamp can happen and 1 if the timestamp will happen 3012 **/ 3013 static int i40e_tsyn(struct i40e_ring *tx_ring, struct sk_buff *skb, 3014 u32 tx_flags, u64 *cd_type_cmd_tso_mss) 3015 { 3016 struct i40e_pf *pf; 3017 3018 if (likely(!(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP))) 3019 return 0; 3020 3021 /* Tx timestamps cannot be sampled when doing TSO */ 3022 if (tx_flags & I40E_TX_FLAGS_TSO) 3023 return 0; 3024 3025 /* only timestamp the outbound packet if the user has requested it and 3026 * we are not already transmitting a packet to be timestamped 3027 */ 3028 pf = i40e_netdev_to_pf(tx_ring->netdev); 3029 if (!(pf->flags & I40E_FLAG_PTP)) 3030 return 0; 3031 3032 if (pf->ptp_tx && 3033 !test_and_set_bit_lock(__I40E_PTP_TX_IN_PROGRESS, pf->state)) { 3034 skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; 3035 pf->ptp_tx_start = jiffies; 3036 pf->ptp_tx_skb = skb_get(skb); 3037 } else { 3038 pf->tx_hwtstamp_skipped++; 3039 return 0; 3040 } 3041 3042 *cd_type_cmd_tso_mss |= (u64)I40E_TX_CTX_DESC_TSYN << 3043 I40E_TXD_CTX_QW1_CMD_SHIFT; 3044 3045 return 1; 3046 } 3047 3048 /** 3049 * i40e_tx_enable_csum - Enable Tx checksum offloads 3050 * @skb: send buffer 3051 * @tx_flags: pointer to Tx flags currently set 3052 * @td_cmd: Tx descriptor command bits to set 3053 * @td_offset: Tx descriptor header offsets to set 3054 * @tx_ring: Tx descriptor ring 3055 * @cd_tunneling: ptr to context desc bits 3056 **/ 3057 static int i40e_tx_enable_csum(struct sk_buff *skb, u32 *tx_flags, 3058 u32 *td_cmd, u32 *td_offset, 3059 struct i40e_ring *tx_ring, 3060 u32 *cd_tunneling) 3061 { 3062 union { 3063 struct iphdr *v4; 3064 struct ipv6hdr *v6; 3065 unsigned char *hdr; 3066 } ip; 3067 union { 3068 struct tcphdr *tcp; 3069 struct udphdr *udp; 3070 unsigned char *hdr; 3071 } l4; 3072 unsigned char *exthdr; 3073 u32 offset, cmd = 0; 3074 __be16 frag_off; 3075 u8 l4_proto = 0; 3076 3077 if (skb->ip_summed != CHECKSUM_PARTIAL) 3078 return 0; 3079 3080 ip.hdr = skb_network_header(skb); 3081 l4.hdr = skb_transport_header(skb); 3082 3083 /* compute outer L2 header size */ 3084 offset = ((ip.hdr - skb->data) / 2) << I40E_TX_DESC_LENGTH_MACLEN_SHIFT; 3085 3086 if (skb->encapsulation) { 3087 u32 tunnel = 0; 3088 /* define outer network header type */ 3089 if (*tx_flags & I40E_TX_FLAGS_IPV4) { 3090 tunnel |= (*tx_flags & I40E_TX_FLAGS_TSO) ? 3091 I40E_TX_CTX_EXT_IP_IPV4 : 3092 I40E_TX_CTX_EXT_IP_IPV4_NO_CSUM; 3093 3094 l4_proto = ip.v4->protocol; 3095 } else if (*tx_flags & I40E_TX_FLAGS_IPV6) { 3096 tunnel |= I40E_TX_CTX_EXT_IP_IPV6; 3097 3098 exthdr = ip.hdr + sizeof(*ip.v6); 3099 l4_proto = ip.v6->nexthdr; 3100 if (l4.hdr != exthdr) 3101 ipv6_skip_exthdr(skb, exthdr - skb->data, 3102 &l4_proto, &frag_off); 3103 } 3104 3105 /* define outer transport */ 3106 switch (l4_proto) { 3107 case IPPROTO_UDP: 3108 tunnel |= I40E_TXD_CTX_UDP_TUNNELING; 3109 *tx_flags |= I40E_TX_FLAGS_UDP_TUNNEL; 3110 break; 3111 case IPPROTO_GRE: 3112 tunnel |= I40E_TXD_CTX_GRE_TUNNELING; 3113 *tx_flags |= I40E_TX_FLAGS_UDP_TUNNEL; 3114 break; 3115 case IPPROTO_IPIP: 3116 case IPPROTO_IPV6: 3117 *tx_flags |= I40E_TX_FLAGS_UDP_TUNNEL; 3118 l4.hdr = skb_inner_network_header(skb); 3119 break; 3120 default: 3121 if (*tx_flags & I40E_TX_FLAGS_TSO) 3122 return -1; 3123 3124 skb_checksum_help(skb); 3125 return 0; 3126 } 3127 3128 /* compute outer L3 header size */ 3129 tunnel |= ((l4.hdr - ip.hdr) / 4) << 3130 I40E_TXD_CTX_QW0_EXT_IPLEN_SHIFT; 3131 3132 /* switch IP header pointer from outer to inner header */ 3133 ip.hdr = skb_inner_network_header(skb); 3134 3135 /* compute tunnel header size */ 3136 tunnel |= ((ip.hdr - l4.hdr) / 2) << 3137 I40E_TXD_CTX_QW0_NATLEN_SHIFT; 3138 3139 /* indicate if we need to offload outer UDP header */ 3140 if ((*tx_flags & I40E_TX_FLAGS_TSO) && 3141 !(skb_shinfo(skb)->gso_type & SKB_GSO_PARTIAL) && 3142 (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL_CSUM)) 3143 tunnel |= I40E_TXD_CTX_QW0_L4T_CS_MASK; 3144 3145 /* record tunnel offload values */ 3146 *cd_tunneling |= tunnel; 3147 3148 /* switch L4 header pointer from outer to inner */ 3149 l4.hdr = skb_inner_transport_header(skb); 3150 l4_proto = 0; 3151 3152 /* reset type as we transition from outer to inner headers */ 3153 *tx_flags &= ~(I40E_TX_FLAGS_IPV4 | I40E_TX_FLAGS_IPV6); 3154 if (ip.v4->version == 4) 3155 *tx_flags |= I40E_TX_FLAGS_IPV4; 3156 if (ip.v6->version == 6) 3157 *tx_flags |= I40E_TX_FLAGS_IPV6; 3158 } 3159 3160 /* Enable IP checksum offloads */ 3161 if (*tx_flags & I40E_TX_FLAGS_IPV4) { 3162 l4_proto = ip.v4->protocol; 3163 /* the stack computes the IP header already, the only time we 3164 * need the hardware to recompute it is in the case of TSO. 3165 */ 3166 cmd |= (*tx_flags & I40E_TX_FLAGS_TSO) ? 3167 I40E_TX_DESC_CMD_IIPT_IPV4_CSUM : 3168 I40E_TX_DESC_CMD_IIPT_IPV4; 3169 } else if (*tx_flags & I40E_TX_FLAGS_IPV6) { 3170 cmd |= I40E_TX_DESC_CMD_IIPT_IPV6; 3171 3172 exthdr = ip.hdr + sizeof(*ip.v6); 3173 l4_proto = ip.v6->nexthdr; 3174 if (l4.hdr != exthdr) 3175 ipv6_skip_exthdr(skb, exthdr - skb->data, 3176 &l4_proto, &frag_off); 3177 } 3178 3179 /* compute inner L3 header size */ 3180 offset |= ((l4.hdr - ip.hdr) / 4) << I40E_TX_DESC_LENGTH_IPLEN_SHIFT; 3181 3182 /* Enable L4 checksum offloads */ 3183 switch (l4_proto) { 3184 case IPPROTO_TCP: 3185 /* enable checksum offloads */ 3186 cmd |= I40E_TX_DESC_CMD_L4T_EOFT_TCP; 3187 offset |= l4.tcp->doff << I40E_TX_DESC_LENGTH_L4_FC_LEN_SHIFT; 3188 break; 3189 case IPPROTO_SCTP: 3190 /* enable SCTP checksum offload */ 3191 cmd |= I40E_TX_DESC_CMD_L4T_EOFT_SCTP; 3192 offset |= (sizeof(struct sctphdr) >> 2) << 3193 I40E_TX_DESC_LENGTH_L4_FC_LEN_SHIFT; 3194 break; 3195 case IPPROTO_UDP: 3196 /* enable UDP checksum offload */ 3197 cmd |= I40E_TX_DESC_CMD_L4T_EOFT_UDP; 3198 offset |= (sizeof(struct udphdr) >> 2) << 3199 I40E_TX_DESC_LENGTH_L4_FC_LEN_SHIFT; 3200 break; 3201 default: 3202 if (*tx_flags & I40E_TX_FLAGS_TSO) 3203 return -1; 3204 skb_checksum_help(skb); 3205 return 0; 3206 } 3207 3208 *td_cmd |= cmd; 3209 *td_offset |= offset; 3210 3211 return 1; 3212 } 3213 3214 /** 3215 * i40e_create_tx_ctx Build the Tx context descriptor 3216 * @tx_ring: ring to create the descriptor on 3217 * @cd_type_cmd_tso_mss: Quad Word 1 3218 * @cd_tunneling: Quad Word 0 - bits 0-31 3219 * @cd_l2tag2: Quad Word 0 - bits 32-63 3220 **/ 3221 static void i40e_create_tx_ctx(struct i40e_ring *tx_ring, 3222 const u64 cd_type_cmd_tso_mss, 3223 const u32 cd_tunneling, const u32 cd_l2tag2) 3224 { 3225 struct i40e_tx_context_desc *context_desc; 3226 int i = tx_ring->next_to_use; 3227 3228 if ((cd_type_cmd_tso_mss == I40E_TX_DESC_DTYPE_CONTEXT) && 3229 !cd_tunneling && !cd_l2tag2) 3230 return; 3231 3232 /* grab the next descriptor */ 3233 context_desc = I40E_TX_CTXTDESC(tx_ring, i); 3234 3235 i++; 3236 tx_ring->next_to_use = (i < tx_ring->count) ? i : 0; 3237 3238 /* cpu_to_le32 and assign to struct fields */ 3239 context_desc->tunneling_params = cpu_to_le32(cd_tunneling); 3240 context_desc->l2tag2 = cpu_to_le16(cd_l2tag2); 3241 context_desc->rsvd = cpu_to_le16(0); 3242 context_desc->type_cmd_tso_mss = cpu_to_le64(cd_type_cmd_tso_mss); 3243 } 3244 3245 /** 3246 * __i40e_maybe_stop_tx - 2nd level check for tx stop conditions 3247 * @tx_ring: the ring to be checked 3248 * @size: the size buffer we want to assure is available 3249 * 3250 * Returns -EBUSY if a stop is needed, else 0 3251 **/ 3252 int __i40e_maybe_stop_tx(struct i40e_ring *tx_ring, int size) 3253 { 3254 netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index); 3255 /* Memory barrier before checking head and tail */ 3256 smp_mb(); 3257 3258 /* Check again in a case another CPU has just made room available. */ 3259 if (likely(I40E_DESC_UNUSED(tx_ring) < size)) 3260 return -EBUSY; 3261 3262 /* A reprieve! - use start_queue because it doesn't call schedule */ 3263 netif_start_subqueue(tx_ring->netdev, tx_ring->queue_index); 3264 ++tx_ring->tx_stats.restart_queue; 3265 return 0; 3266 } 3267 3268 /** 3269 * __i40e_chk_linearize - Check if there are more than 8 buffers per packet 3270 * @skb: send buffer 3271 * 3272 * Note: Our HW can't DMA more than 8 buffers to build a packet on the wire 3273 * and so we need to figure out the cases where we need to linearize the skb. 3274 * 3275 * For TSO we need to count the TSO header and segment payload separately. 3276 * As such we need to check cases where we have 7 fragments or more as we 3277 * can potentially require 9 DMA transactions, 1 for the TSO header, 1 for 3278 * the segment payload in the first descriptor, and another 7 for the 3279 * fragments. 3280 **/ 3281 bool __i40e_chk_linearize(struct sk_buff *skb) 3282 { 3283 const struct skb_frag_struct *frag, *stale; 3284 int nr_frags, sum; 3285 3286 /* no need to check if number of frags is less than 7 */ 3287 nr_frags = skb_shinfo(skb)->nr_frags; 3288 if (nr_frags < (I40E_MAX_BUFFER_TXD - 1)) 3289 return false; 3290 3291 /* We need to walk through the list and validate that each group 3292 * of 6 fragments totals at least gso_size. 3293 */ 3294 nr_frags -= I40E_MAX_BUFFER_TXD - 2; 3295 frag = &skb_shinfo(skb)->frags[0]; 3296 3297 /* Initialize size to the negative value of gso_size minus 1. We 3298 * use this as the worst case scenerio in which the frag ahead 3299 * of us only provides one byte which is why we are limited to 6 3300 * descriptors for a single transmit as the header and previous 3301 * fragment are already consuming 2 descriptors. 3302 */ 3303 sum = 1 - skb_shinfo(skb)->gso_size; 3304 3305 /* Add size of frags 0 through 4 to create our initial sum */ 3306 sum += skb_frag_size(frag++); 3307 sum += skb_frag_size(frag++); 3308 sum += skb_frag_size(frag++); 3309 sum += skb_frag_size(frag++); 3310 sum += skb_frag_size(frag++); 3311 3312 /* Walk through fragments adding latest fragment, testing it, and 3313 * then removing stale fragments from the sum. 3314 */ 3315 for (stale = &skb_shinfo(skb)->frags[0];; stale++) { 3316 int stale_size = skb_frag_size(stale); 3317 3318 sum += skb_frag_size(frag++); 3319 3320 /* The stale fragment may present us with a smaller 3321 * descriptor than the actual fragment size. To account 3322 * for that we need to remove all the data on the front and 3323 * figure out what the remainder would be in the last 3324 * descriptor associated with the fragment. 3325 */ 3326 if (stale_size > I40E_MAX_DATA_PER_TXD) { 3327 int align_pad = -(stale->page_offset) & 3328 (I40E_MAX_READ_REQ_SIZE - 1); 3329 3330 sum -= align_pad; 3331 stale_size -= align_pad; 3332 3333 do { 3334 sum -= I40E_MAX_DATA_PER_TXD_ALIGNED; 3335 stale_size -= I40E_MAX_DATA_PER_TXD_ALIGNED; 3336 } while (stale_size > I40E_MAX_DATA_PER_TXD); 3337 } 3338 3339 /* if sum is negative we failed to make sufficient progress */ 3340 if (sum < 0) 3341 return true; 3342 3343 if (!nr_frags--) 3344 break; 3345 3346 sum -= stale_size; 3347 } 3348 3349 return false; 3350 } 3351 3352 /** 3353 * i40e_tx_map - Build the Tx descriptor 3354 * @tx_ring: ring to send buffer on 3355 * @skb: send buffer 3356 * @first: first buffer info buffer to use 3357 * @tx_flags: collected send information 3358 * @hdr_len: size of the packet header 3359 * @td_cmd: the command field in the descriptor 3360 * @td_offset: offset for checksum or crc 3361 * 3362 * Returns 0 on success, -1 on failure to DMA 3363 **/ 3364 static inline int i40e_tx_map(struct i40e_ring *tx_ring, struct sk_buff *skb, 3365 struct i40e_tx_buffer *first, u32 tx_flags, 3366 const u8 hdr_len, u32 td_cmd, u32 td_offset) 3367 { 3368 unsigned int data_len = skb->data_len; 3369 unsigned int size = skb_headlen(skb); 3370 struct skb_frag_struct *frag; 3371 struct i40e_tx_buffer *tx_bi; 3372 struct i40e_tx_desc *tx_desc; 3373 u16 i = tx_ring->next_to_use; 3374 u32 td_tag = 0; 3375 dma_addr_t dma; 3376 u16 desc_count = 1; 3377 3378 if (tx_flags & I40E_TX_FLAGS_HW_VLAN) { 3379 td_cmd |= I40E_TX_DESC_CMD_IL2TAG1; 3380 td_tag = (tx_flags & I40E_TX_FLAGS_VLAN_MASK) >> 3381 I40E_TX_FLAGS_VLAN_SHIFT; 3382 } 3383 3384 first->tx_flags = tx_flags; 3385 3386 dma = dma_map_single(tx_ring->dev, skb->data, size, DMA_TO_DEVICE); 3387 3388 tx_desc = I40E_TX_DESC(tx_ring, i); 3389 tx_bi = first; 3390 3391 for (frag = &skb_shinfo(skb)->frags[0];; frag++) { 3392 unsigned int max_data = I40E_MAX_DATA_PER_TXD_ALIGNED; 3393 3394 if (dma_mapping_error(tx_ring->dev, dma)) 3395 goto dma_error; 3396 3397 /* record length, and DMA address */ 3398 dma_unmap_len_set(tx_bi, len, size); 3399 dma_unmap_addr_set(tx_bi, dma, dma); 3400 3401 /* align size to end of page */ 3402 max_data += -dma & (I40E_MAX_READ_REQ_SIZE - 1); 3403 tx_desc->buffer_addr = cpu_to_le64(dma); 3404 3405 while (unlikely(size > I40E_MAX_DATA_PER_TXD)) { 3406 tx_desc->cmd_type_offset_bsz = 3407 build_ctob(td_cmd, td_offset, 3408 max_data, td_tag); 3409 3410 tx_desc++; 3411 i++; 3412 desc_count++; 3413 3414 if (i == tx_ring->count) { 3415 tx_desc = I40E_TX_DESC(tx_ring, 0); 3416 i = 0; 3417 } 3418 3419 dma += max_data; 3420 size -= max_data; 3421 3422 max_data = I40E_MAX_DATA_PER_TXD_ALIGNED; 3423 tx_desc->buffer_addr = cpu_to_le64(dma); 3424 } 3425 3426 if (likely(!data_len)) 3427 break; 3428 3429 tx_desc->cmd_type_offset_bsz = build_ctob(td_cmd, td_offset, 3430 size, td_tag); 3431 3432 tx_desc++; 3433 i++; 3434 desc_count++; 3435 3436 if (i == tx_ring->count) { 3437 tx_desc = I40E_TX_DESC(tx_ring, 0); 3438 i = 0; 3439 } 3440 3441 size = skb_frag_size(frag); 3442 data_len -= size; 3443 3444 dma = skb_frag_dma_map(tx_ring->dev, frag, 0, size, 3445 DMA_TO_DEVICE); 3446 3447 tx_bi = &tx_ring->tx_bi[i]; 3448 } 3449 3450 netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount); 3451 3452 i++; 3453 if (i == tx_ring->count) 3454 i = 0; 3455 3456 tx_ring->next_to_use = i; 3457 3458 i40e_maybe_stop_tx(tx_ring, DESC_NEEDED); 3459 3460 /* write last descriptor with EOP bit */ 3461 td_cmd |= I40E_TX_DESC_CMD_EOP; 3462 3463 /* We OR these values together to check both against 4 (WB_STRIDE) 3464 * below. This is safe since we don't re-use desc_count afterwards. 3465 */ 3466 desc_count |= ++tx_ring->packet_stride; 3467 3468 if (desc_count >= WB_STRIDE) { 3469 /* write last descriptor with RS bit set */ 3470 td_cmd |= I40E_TX_DESC_CMD_RS; 3471 tx_ring->packet_stride = 0; 3472 } 3473 3474 tx_desc->cmd_type_offset_bsz = 3475 build_ctob(td_cmd, td_offset, size, td_tag); 3476 3477 skb_tx_timestamp(skb); 3478 3479 /* Force memory writes to complete before letting h/w know there 3480 * are new descriptors to fetch. 3481 * 3482 * We also use this memory barrier to make certain all of the 3483 * status bits have been updated before next_to_watch is written. 3484 */ 3485 wmb(); 3486 3487 /* set next_to_watch value indicating a packet is present */ 3488 first->next_to_watch = tx_desc; 3489 3490 /* notify HW of packet */ 3491 if (netif_xmit_stopped(txring_txq(tx_ring)) || !skb->xmit_more) { 3492 writel(i, tx_ring->tail); 3493 3494 /* we need this if more than one processor can write to our tail 3495 * at a time, it synchronizes IO on IA64/Altix systems 3496 */ 3497 mmiowb(); 3498 } 3499 3500 return 0; 3501 3502 dma_error: 3503 dev_info(tx_ring->dev, "TX DMA map failed\n"); 3504 3505 /* clear dma mappings for failed tx_bi map */ 3506 for (;;) { 3507 tx_bi = &tx_ring->tx_bi[i]; 3508 i40e_unmap_and_free_tx_resource(tx_ring, tx_bi); 3509 if (tx_bi == first) 3510 break; 3511 if (i == 0) 3512 i = tx_ring->count; 3513 i--; 3514 } 3515 3516 tx_ring->next_to_use = i; 3517 3518 return -1; 3519 } 3520 3521 /** 3522 * i40e_xmit_xdp_ring - transmits an XDP buffer to an XDP Tx ring 3523 * @xdp: data to transmit 3524 * @xdp_ring: XDP Tx ring 3525 **/ 3526 static int i40e_xmit_xdp_ring(struct xdp_frame *xdpf, 3527 struct i40e_ring *xdp_ring) 3528 { 3529 u16 i = xdp_ring->next_to_use; 3530 struct i40e_tx_buffer *tx_bi; 3531 struct i40e_tx_desc *tx_desc; 3532 void *data = xdpf->data; 3533 u32 size = xdpf->len; 3534 dma_addr_t dma; 3535 3536 if (!unlikely(I40E_DESC_UNUSED(xdp_ring))) { 3537 xdp_ring->tx_stats.tx_busy++; 3538 return I40E_XDP_CONSUMED; 3539 } 3540 dma = dma_map_single(xdp_ring->dev, data, size, DMA_TO_DEVICE); 3541 if (dma_mapping_error(xdp_ring->dev, dma)) 3542 return I40E_XDP_CONSUMED; 3543 3544 tx_bi = &xdp_ring->tx_bi[i]; 3545 tx_bi->bytecount = size; 3546 tx_bi->gso_segs = 1; 3547 tx_bi->xdpf = xdpf; 3548 3549 /* record length, and DMA address */ 3550 dma_unmap_len_set(tx_bi, len, size); 3551 dma_unmap_addr_set(tx_bi, dma, dma); 3552 3553 tx_desc = I40E_TX_DESC(xdp_ring, i); 3554 tx_desc->buffer_addr = cpu_to_le64(dma); 3555 tx_desc->cmd_type_offset_bsz = build_ctob(I40E_TX_DESC_CMD_ICRC 3556 | I40E_TXD_CMD, 3557 0, size, 0); 3558 3559 /* Make certain all of the status bits have been updated 3560 * before next_to_watch is written. 3561 */ 3562 smp_wmb(); 3563 3564 i++; 3565 if (i == xdp_ring->count) 3566 i = 0; 3567 3568 tx_bi->next_to_watch = tx_desc; 3569 xdp_ring->next_to_use = i; 3570 3571 return I40E_XDP_TX; 3572 } 3573 3574 /** 3575 * i40e_xmit_frame_ring - Sends buffer on Tx ring 3576 * @skb: send buffer 3577 * @tx_ring: ring to send buffer on 3578 * 3579 * Returns NETDEV_TX_OK if sent, else an error code 3580 **/ 3581 static netdev_tx_t i40e_xmit_frame_ring(struct sk_buff *skb, 3582 struct i40e_ring *tx_ring) 3583 { 3584 u64 cd_type_cmd_tso_mss = I40E_TX_DESC_DTYPE_CONTEXT; 3585 u32 cd_tunneling = 0, cd_l2tag2 = 0; 3586 struct i40e_tx_buffer *first; 3587 u32 td_offset = 0; 3588 u32 tx_flags = 0; 3589 __be16 protocol; 3590 u32 td_cmd = 0; 3591 u8 hdr_len = 0; 3592 int tso, count; 3593 int tsyn; 3594 3595 /* prefetch the data, we'll need it later */ 3596 prefetch(skb->data); 3597 3598 i40e_trace(xmit_frame_ring, skb, tx_ring); 3599 3600 count = i40e_xmit_descriptor_count(skb); 3601 if (i40e_chk_linearize(skb, count)) { 3602 if (__skb_linearize(skb)) { 3603 dev_kfree_skb_any(skb); 3604 return NETDEV_TX_OK; 3605 } 3606 count = i40e_txd_use_count(skb->len); 3607 tx_ring->tx_stats.tx_linearize++; 3608 } 3609 3610 /* need: 1 descriptor per page * PAGE_SIZE/I40E_MAX_DATA_PER_TXD, 3611 * + 1 desc for skb_head_len/I40E_MAX_DATA_PER_TXD, 3612 * + 4 desc gap to avoid the cache line where head is, 3613 * + 1 desc for context descriptor, 3614 * otherwise try next time 3615 */ 3616 if (i40e_maybe_stop_tx(tx_ring, count + 4 + 1)) { 3617 tx_ring->tx_stats.tx_busy++; 3618 return NETDEV_TX_BUSY; 3619 } 3620 3621 /* record the location of the first descriptor for this packet */ 3622 first = &tx_ring->tx_bi[tx_ring->next_to_use]; 3623 first->skb = skb; 3624 first->bytecount = skb->len; 3625 first->gso_segs = 1; 3626 3627 /* prepare the xmit flags */ 3628 if (i40e_tx_prepare_vlan_flags(skb, tx_ring, &tx_flags)) 3629 goto out_drop; 3630 3631 /* obtain protocol of skb */ 3632 protocol = vlan_get_protocol(skb); 3633 3634 /* setup IPv4/IPv6 offloads */ 3635 if (protocol == htons(ETH_P_IP)) 3636 tx_flags |= I40E_TX_FLAGS_IPV4; 3637 else if (protocol == htons(ETH_P_IPV6)) 3638 tx_flags |= I40E_TX_FLAGS_IPV6; 3639 3640 tso = i40e_tso(first, &hdr_len, &cd_type_cmd_tso_mss); 3641 3642 if (tso < 0) 3643 goto out_drop; 3644 else if (tso) 3645 tx_flags |= I40E_TX_FLAGS_TSO; 3646 3647 /* Always offload the checksum, since it's in the data descriptor */ 3648 tso = i40e_tx_enable_csum(skb, &tx_flags, &td_cmd, &td_offset, 3649 tx_ring, &cd_tunneling); 3650 if (tso < 0) 3651 goto out_drop; 3652 3653 tsyn = i40e_tsyn(tx_ring, skb, tx_flags, &cd_type_cmd_tso_mss); 3654 3655 if (tsyn) 3656 tx_flags |= I40E_TX_FLAGS_TSYN; 3657 3658 /* always enable CRC insertion offload */ 3659 td_cmd |= I40E_TX_DESC_CMD_ICRC; 3660 3661 i40e_create_tx_ctx(tx_ring, cd_type_cmd_tso_mss, 3662 cd_tunneling, cd_l2tag2); 3663 3664 /* Add Flow Director ATR if it's enabled. 3665 * 3666 * NOTE: this must always be directly before the data descriptor. 3667 */ 3668 i40e_atr(tx_ring, skb, tx_flags); 3669 3670 if (i40e_tx_map(tx_ring, skb, first, tx_flags, hdr_len, 3671 td_cmd, td_offset)) 3672 goto cleanup_tx_tstamp; 3673 3674 return NETDEV_TX_OK; 3675 3676 out_drop: 3677 i40e_trace(xmit_frame_ring_drop, first->skb, tx_ring); 3678 dev_kfree_skb_any(first->skb); 3679 first->skb = NULL; 3680 cleanup_tx_tstamp: 3681 if (unlikely(tx_flags & I40E_TX_FLAGS_TSYN)) { 3682 struct i40e_pf *pf = i40e_netdev_to_pf(tx_ring->netdev); 3683 3684 dev_kfree_skb_any(pf->ptp_tx_skb); 3685 pf->ptp_tx_skb = NULL; 3686 clear_bit_unlock(__I40E_PTP_TX_IN_PROGRESS, pf->state); 3687 } 3688 3689 return NETDEV_TX_OK; 3690 } 3691 3692 /** 3693 * i40e_lan_xmit_frame - Selects the correct VSI and Tx queue to send buffer 3694 * @skb: send buffer 3695 * @netdev: network interface device structure 3696 * 3697 * Returns NETDEV_TX_OK if sent, else an error code 3698 **/ 3699 netdev_tx_t i40e_lan_xmit_frame(struct sk_buff *skb, struct net_device *netdev) 3700 { 3701 struct i40e_netdev_priv *np = netdev_priv(netdev); 3702 struct i40e_vsi *vsi = np->vsi; 3703 struct i40e_ring *tx_ring = vsi->tx_rings[skb->queue_mapping]; 3704 3705 /* hardware can't handle really short frames, hardware padding works 3706 * beyond this point 3707 */ 3708 if (skb_put_padto(skb, I40E_MIN_TX_LEN)) 3709 return NETDEV_TX_OK; 3710 3711 return i40e_xmit_frame_ring(skb, tx_ring); 3712 } 3713 3714 /** 3715 * i40e_xdp_xmit - Implements ndo_xdp_xmit 3716 * @dev: netdev 3717 * @xdp: XDP buffer 3718 * 3719 * Returns number of frames successfully sent. Frames that fail are 3720 * free'ed via XDP return API. 3721 * 3722 * For error cases, a negative errno code is returned and no-frames 3723 * are transmitted (caller must handle freeing frames). 3724 **/ 3725 int i40e_xdp_xmit(struct net_device *dev, int n, struct xdp_frame **frames, 3726 u32 flags) 3727 { 3728 struct i40e_netdev_priv *np = netdev_priv(dev); 3729 unsigned int queue_index = smp_processor_id(); 3730 struct i40e_vsi *vsi = np->vsi; 3731 struct i40e_ring *xdp_ring; 3732 int drops = 0; 3733 int i; 3734 3735 if (test_bit(__I40E_VSI_DOWN, vsi->state)) 3736 return -ENETDOWN; 3737 3738 if (!i40e_enabled_xdp_vsi(vsi) || queue_index >= vsi->num_queue_pairs) 3739 return -ENXIO; 3740 3741 if (unlikely(flags & ~XDP_XMIT_FLAGS_MASK)) 3742 return -EINVAL; 3743 3744 xdp_ring = vsi->xdp_rings[queue_index]; 3745 3746 for (i = 0; i < n; i++) { 3747 struct xdp_frame *xdpf = frames[i]; 3748 int err; 3749 3750 err = i40e_xmit_xdp_ring(xdpf, xdp_ring); 3751 if (err != I40E_XDP_TX) { 3752 xdp_return_frame_rx_napi(xdpf); 3753 drops++; 3754 } 3755 } 3756 3757 if (unlikely(flags & XDP_XMIT_FLUSH)) 3758 i40e_xdp_ring_update_tail(xdp_ring); 3759 3760 return n - drops; 3761 } 3762