1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright(c) 2013 - 2019 Intel Corporation. */
3 
4 #include "fm10k.h"
5 #include "fm10k_vf.h"
6 #include "fm10k_pf.h"
7 
8 static s32 fm10k_iov_msg_error(struct fm10k_hw *hw, u32 **results,
9 			       struct fm10k_mbx_info *mbx)
10 {
11 	struct fm10k_vf_info *vf_info = (struct fm10k_vf_info *)mbx;
12 	struct fm10k_intfc *interface = hw->back;
13 	struct pci_dev *pdev = interface->pdev;
14 
15 	dev_err(&pdev->dev, "Unknown message ID %u on VF %d\n",
16 		**results & FM10K_TLV_ID_MASK, vf_info->vf_idx);
17 
18 	return fm10k_tlv_msg_error(hw, results, mbx);
19 }
20 
21 /**
22  *  fm10k_iov_msg_queue_mac_vlan - Message handler for MAC/VLAN request from VF
23  *  @hw: Pointer to hardware structure
24  *  @results: Pointer array to message, results[0] is pointer to message
25  *  @mbx: Pointer to mailbox information structure
26  *
27  *  This function is a custom handler for MAC/VLAN requests from the VF. The
28  *  assumption is that it is acceptable to directly hand off the message from
29  *  the VF to the PF's switch manager. However, we use a MAC/VLAN message
30  *  queue to avoid overloading the mailbox when a large number of requests
31  *  come in.
32  **/
33 static s32 fm10k_iov_msg_queue_mac_vlan(struct fm10k_hw *hw, u32 **results,
34 					struct fm10k_mbx_info *mbx)
35 {
36 	struct fm10k_vf_info *vf_info = (struct fm10k_vf_info *)mbx;
37 	struct fm10k_intfc *interface = hw->back;
38 	u8 mac[ETH_ALEN];
39 	u32 *result;
40 	int err = 0;
41 	bool set;
42 	u16 vlan;
43 	u32 vid;
44 
45 	/* we shouldn't be updating rules on a disabled interface */
46 	if (!FM10K_VF_FLAG_ENABLED(vf_info))
47 		err = FM10K_ERR_PARAM;
48 
49 	if (!err && !!results[FM10K_MAC_VLAN_MSG_VLAN]) {
50 		result = results[FM10K_MAC_VLAN_MSG_VLAN];
51 
52 		/* record VLAN id requested */
53 		err = fm10k_tlv_attr_get_u32(result, &vid);
54 		if (err)
55 			return err;
56 
57 		set = !(vid & FM10K_VLAN_CLEAR);
58 		vid &= ~FM10K_VLAN_CLEAR;
59 
60 		/* if the length field has been set, this is a multi-bit
61 		 * update request. For multi-bit requests, simply disallow
62 		 * them when the pf_vid has been set. In this case, the PF
63 		 * should have already cleared the VLAN_TABLE, and if we
64 		 * allowed them, it could allow a rogue VF to receive traffic
65 		 * on a VLAN it was not assigned. In the single-bit case, we
66 		 * need to modify requests for VLAN 0 to use the default PF or
67 		 * SW vid when assigned.
68 		 */
69 
70 		if (vid >> 16) {
71 			/* prevent multi-bit requests when PF has
72 			 * administratively set the VLAN for this VF
73 			 */
74 			if (vf_info->pf_vid)
75 				return FM10K_ERR_PARAM;
76 		} else {
77 			err = fm10k_iov_select_vid(vf_info, (u16)vid);
78 			if (err < 0)
79 				return err;
80 
81 			vid = err;
82 		}
83 
84 		/* update VSI info for VF in regards to VLAN table */
85 		err = hw->mac.ops.update_vlan(hw, vid, vf_info->vsi, set);
86 	}
87 
88 	if (!err && !!results[FM10K_MAC_VLAN_MSG_MAC]) {
89 		result = results[FM10K_MAC_VLAN_MSG_MAC];
90 
91 		/* record unicast MAC address requested */
92 		err = fm10k_tlv_attr_get_mac_vlan(result, mac, &vlan);
93 		if (err)
94 			return err;
95 
96 		/* block attempts to set MAC for a locked device */
97 		if (is_valid_ether_addr(vf_info->mac) &&
98 		    !ether_addr_equal(mac, vf_info->mac))
99 			return FM10K_ERR_PARAM;
100 
101 		set = !(vlan & FM10K_VLAN_CLEAR);
102 		vlan &= ~FM10K_VLAN_CLEAR;
103 
104 		err = fm10k_iov_select_vid(vf_info, vlan);
105 		if (err < 0)
106 			return err;
107 
108 		vlan = (u16)err;
109 
110 		/* Add this request to the MAC/VLAN queue */
111 		err = fm10k_queue_mac_request(interface, vf_info->glort,
112 					      mac, vlan, set);
113 	}
114 
115 	if (!err && !!results[FM10K_MAC_VLAN_MSG_MULTICAST]) {
116 		result = results[FM10K_MAC_VLAN_MSG_MULTICAST];
117 
118 		/* record multicast MAC address requested */
119 		err = fm10k_tlv_attr_get_mac_vlan(result, mac, &vlan);
120 		if (err)
121 			return err;
122 
123 		/* verify that the VF is allowed to request multicast */
124 		if (!(vf_info->vf_flags & FM10K_VF_FLAG_MULTI_ENABLED))
125 			return FM10K_ERR_PARAM;
126 
127 		set = !(vlan & FM10K_VLAN_CLEAR);
128 		vlan &= ~FM10K_VLAN_CLEAR;
129 
130 		err = fm10k_iov_select_vid(vf_info, vlan);
131 		if (err < 0)
132 			return err;
133 
134 		vlan = (u16)err;
135 
136 		/* Add this request to the MAC/VLAN queue */
137 		err = fm10k_queue_mac_request(interface, vf_info->glort,
138 					      mac, vlan, set);
139 	}
140 
141 	return err;
142 }
143 
144 static const struct fm10k_msg_data iov_mbx_data[] = {
145 	FM10K_TLV_MSG_TEST_HANDLER(fm10k_tlv_msg_test),
146 	FM10K_VF_MSG_MSIX_HANDLER(fm10k_iov_msg_msix_pf),
147 	FM10K_VF_MSG_MAC_VLAN_HANDLER(fm10k_iov_msg_queue_mac_vlan),
148 	FM10K_VF_MSG_LPORT_STATE_HANDLER(fm10k_iov_msg_lport_state_pf),
149 	FM10K_TLV_MSG_ERROR_HANDLER(fm10k_iov_msg_error),
150 };
151 
152 s32 fm10k_iov_event(struct fm10k_intfc *interface)
153 {
154 	struct fm10k_hw *hw = &interface->hw;
155 	struct fm10k_iov_data *iov_data;
156 	s64 vflre;
157 	int i;
158 
159 	/* if there is no iov_data then there is no mailbox to process */
160 	if (!READ_ONCE(interface->iov_data))
161 		return 0;
162 
163 	rcu_read_lock();
164 
165 	iov_data = interface->iov_data;
166 
167 	/* check again now that we are in the RCU block */
168 	if (!iov_data)
169 		goto read_unlock;
170 
171 	if (!(fm10k_read_reg(hw, FM10K_EICR) & FM10K_EICR_VFLR))
172 		goto read_unlock;
173 
174 	/* read VFLRE to determine if any VFs have been reset */
175 	vflre = fm10k_read_reg(hw, FM10K_PFVFLRE(1));
176 	vflre <<= 32;
177 	vflre |= fm10k_read_reg(hw, FM10K_PFVFLRE(0));
178 
179 	i = iov_data->num_vfs;
180 
181 	for (vflre <<= 64 - i; vflre && i--; vflre += vflre) {
182 		struct fm10k_vf_info *vf_info = &iov_data->vf_info[i];
183 
184 		if (vflre >= 0)
185 			continue;
186 
187 		hw->iov.ops.reset_resources(hw, vf_info);
188 		vf_info->mbx.ops.connect(hw, &vf_info->mbx);
189 	}
190 
191 read_unlock:
192 	rcu_read_unlock();
193 
194 	return 0;
195 }
196 
197 s32 fm10k_iov_mbx(struct fm10k_intfc *interface)
198 {
199 	struct fm10k_hw *hw = &interface->hw;
200 	struct fm10k_iov_data *iov_data;
201 	int i;
202 
203 	/* if there is no iov_data then there is no mailbox to process */
204 	if (!READ_ONCE(interface->iov_data))
205 		return 0;
206 
207 	rcu_read_lock();
208 
209 	iov_data = interface->iov_data;
210 
211 	/* check again now that we are in the RCU block */
212 	if (!iov_data)
213 		goto read_unlock;
214 
215 	/* lock the mailbox for transmit and receive */
216 	fm10k_mbx_lock(interface);
217 
218 	/* Most VF messages sent to the PF cause the PF to respond by
219 	 * requesting from the SM mailbox. This means that too many VF
220 	 * messages processed at once could cause a mailbox timeout on the PF.
221 	 * To prevent this, store a pointer to the next VF mbx to process. Use
222 	 * that as the start of the loop so that we don't starve whichever VF
223 	 * got ignored on the previous run.
224 	 */
225 process_mbx:
226 	for (i = iov_data->next_vf_mbx ? : iov_data->num_vfs; i--;) {
227 		struct fm10k_vf_info *vf_info = &iov_data->vf_info[i];
228 		struct fm10k_mbx_info *mbx = &vf_info->mbx;
229 		u16 glort = vf_info->glort;
230 
231 		/* process the SM mailbox first to drain outgoing messages */
232 		hw->mbx.ops.process(hw, &hw->mbx);
233 
234 		/* verify port mapping is valid, if not reset port */
235 		if (vf_info->vf_flags && !fm10k_glort_valid_pf(hw, glort)) {
236 			hw->iov.ops.reset_lport(hw, vf_info);
237 			fm10k_clear_macvlan_queue(interface, glort, false);
238 		}
239 
240 		/* reset VFs that have mailbox timed out */
241 		if (!mbx->timeout) {
242 			hw->iov.ops.reset_resources(hw, vf_info);
243 			mbx->ops.connect(hw, mbx);
244 		}
245 
246 		/* guarantee we have free space in the SM mailbox */
247 		if (hw->mbx.state == FM10K_STATE_OPEN &&
248 		    !hw->mbx.ops.tx_ready(&hw->mbx, FM10K_VFMBX_MSG_MTU)) {
249 			/* keep track of how many times this occurs */
250 			interface->hw_sm_mbx_full++;
251 
252 			/* make sure we try again momentarily */
253 			fm10k_service_event_schedule(interface);
254 
255 			break;
256 		}
257 
258 		/* cleanup mailbox and process received messages */
259 		mbx->ops.process(hw, mbx);
260 	}
261 
262 	/* if we stopped processing mailboxes early, update next_vf_mbx.
263 	 * Otherwise, reset next_vf_mbx, and restart loop so that we process
264 	 * the remaining mailboxes we skipped at the start.
265 	 */
266 	if (i >= 0) {
267 		iov_data->next_vf_mbx = i + 1;
268 	} else if (iov_data->next_vf_mbx) {
269 		iov_data->next_vf_mbx = 0;
270 		goto process_mbx;
271 	}
272 
273 	/* free the lock */
274 	fm10k_mbx_unlock(interface);
275 
276 read_unlock:
277 	rcu_read_unlock();
278 
279 	return 0;
280 }
281 
282 void fm10k_iov_suspend(struct pci_dev *pdev)
283 {
284 	struct fm10k_intfc *interface = pci_get_drvdata(pdev);
285 	struct fm10k_iov_data *iov_data = interface->iov_data;
286 	struct fm10k_hw *hw = &interface->hw;
287 	int num_vfs, i;
288 
289 	/* pull out num_vfs from iov_data */
290 	num_vfs = iov_data ? iov_data->num_vfs : 0;
291 
292 	/* shut down queue mapping for VFs */
293 	fm10k_write_reg(hw, FM10K_DGLORTMAP(fm10k_dglort_vf_rss),
294 			FM10K_DGLORTMAP_NONE);
295 
296 	/* Stop any active VFs and reset their resources */
297 	for (i = 0; i < num_vfs; i++) {
298 		struct fm10k_vf_info *vf_info = &iov_data->vf_info[i];
299 
300 		hw->iov.ops.reset_resources(hw, vf_info);
301 		hw->iov.ops.reset_lport(hw, vf_info);
302 		fm10k_clear_macvlan_queue(interface, vf_info->glort, false);
303 	}
304 }
305 
306 static void fm10k_mask_aer_comp_abort(struct pci_dev *pdev)
307 {
308 	u32 err_mask;
309 	int pos;
310 
311 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
312 	if (!pos)
313 		return;
314 
315 	/* Mask the completion abort bit in the ERR_UNCOR_MASK register,
316 	 * preventing the device from reporting these errors to the upstream
317 	 * PCIe root device. This avoids bringing down platforms which upgrade
318 	 * non-fatal completer aborts into machine check exceptions. Completer
319 	 * aborts can occur whenever a VF reads a queue it doesn't own.
320 	 */
321 	pci_read_config_dword(pdev, pos + PCI_ERR_UNCOR_MASK, &err_mask);
322 	err_mask |= PCI_ERR_UNC_COMP_ABORT;
323 	pci_write_config_dword(pdev, pos + PCI_ERR_UNCOR_MASK, err_mask);
324 }
325 
326 int fm10k_iov_resume(struct pci_dev *pdev)
327 {
328 	struct fm10k_intfc *interface = pci_get_drvdata(pdev);
329 	struct fm10k_iov_data *iov_data = interface->iov_data;
330 	struct fm10k_dglort_cfg dglort = { 0 };
331 	struct fm10k_hw *hw = &interface->hw;
332 	int num_vfs, i;
333 
334 	/* pull out num_vfs from iov_data */
335 	num_vfs = iov_data ? iov_data->num_vfs : 0;
336 
337 	/* return error if iov_data is not already populated */
338 	if (!iov_data)
339 		return -ENOMEM;
340 
341 	/* Lower severity of completer abort error reporting as
342 	 * the VFs can trigger this any time they read a queue
343 	 * that they don't own.
344 	 */
345 	fm10k_mask_aer_comp_abort(pdev);
346 
347 	/* allocate hardware resources for the VFs */
348 	hw->iov.ops.assign_resources(hw, num_vfs, num_vfs);
349 
350 	/* configure DGLORT mapping for RSS */
351 	dglort.glort = hw->mac.dglort_map & FM10K_DGLORTMAP_NONE;
352 	dglort.idx = fm10k_dglort_vf_rss;
353 	dglort.inner_rss = 1;
354 	dglort.rss_l = fls(fm10k_queues_per_pool(hw) - 1);
355 	dglort.queue_b = fm10k_vf_queue_index(hw, 0);
356 	dglort.vsi_l = fls(hw->iov.total_vfs - 1);
357 	dglort.vsi_b = 1;
358 
359 	hw->mac.ops.configure_dglort_map(hw, &dglort);
360 
361 	/* assign resources to the device */
362 	for (i = 0; i < num_vfs; i++) {
363 		struct fm10k_vf_info *vf_info = &iov_data->vf_info[i];
364 
365 		/* allocate all but the last GLORT to the VFs */
366 		if (i == (~hw->mac.dglort_map >> FM10K_DGLORTMAP_MASK_SHIFT))
367 			break;
368 
369 		/* assign GLORT to VF, and restrict it to multicast */
370 		hw->iov.ops.set_lport(hw, vf_info, i,
371 				      FM10K_VF_FLAG_MULTI_CAPABLE);
372 
373 		/* mailbox is disconnected so we don't send a message */
374 		hw->iov.ops.assign_default_mac_vlan(hw, vf_info);
375 
376 		/* now we are ready so we can connect */
377 		vf_info->mbx.ops.connect(hw, &vf_info->mbx);
378 	}
379 
380 	return 0;
381 }
382 
383 s32 fm10k_iov_update_pvid(struct fm10k_intfc *interface, u16 glort, u16 pvid)
384 {
385 	struct fm10k_iov_data *iov_data = interface->iov_data;
386 	struct fm10k_hw *hw = &interface->hw;
387 	struct fm10k_vf_info *vf_info;
388 	u16 vf_idx = (glort - hw->mac.dglort_map) & FM10K_DGLORTMAP_NONE;
389 
390 	/* no IOV support, not our message to process */
391 	if (!iov_data)
392 		return FM10K_ERR_PARAM;
393 
394 	/* glort outside our range, not our message to process */
395 	if (vf_idx >= iov_data->num_vfs)
396 		return FM10K_ERR_PARAM;
397 
398 	/* determine if an update has occurred and if so notify the VF */
399 	vf_info = &iov_data->vf_info[vf_idx];
400 	if (vf_info->sw_vid != pvid) {
401 		vf_info->sw_vid = pvid;
402 		hw->iov.ops.assign_default_mac_vlan(hw, vf_info);
403 	}
404 
405 	return 0;
406 }
407 
408 static void fm10k_iov_free_data(struct pci_dev *pdev)
409 {
410 	struct fm10k_intfc *interface = pci_get_drvdata(pdev);
411 
412 	if (!interface->iov_data)
413 		return;
414 
415 	/* reclaim hardware resources */
416 	fm10k_iov_suspend(pdev);
417 
418 	/* drop iov_data from interface */
419 	kfree_rcu(interface->iov_data, rcu);
420 	interface->iov_data = NULL;
421 }
422 
423 static s32 fm10k_iov_alloc_data(struct pci_dev *pdev, int num_vfs)
424 {
425 	struct fm10k_intfc *interface = pci_get_drvdata(pdev);
426 	struct fm10k_iov_data *iov_data = interface->iov_data;
427 	struct fm10k_hw *hw = &interface->hw;
428 	size_t size;
429 	int i;
430 
431 	/* return error if iov_data is already populated */
432 	if (iov_data)
433 		return -EBUSY;
434 
435 	/* The PF should always be able to assign resources */
436 	if (!hw->iov.ops.assign_resources)
437 		return -ENODEV;
438 
439 	/* nothing to do if no VFs are requested */
440 	if (!num_vfs)
441 		return 0;
442 
443 	/* allocate memory for VF storage */
444 	size = offsetof(struct fm10k_iov_data, vf_info[num_vfs]);
445 	iov_data = kzalloc(size, GFP_KERNEL);
446 	if (!iov_data)
447 		return -ENOMEM;
448 
449 	/* record number of VFs */
450 	iov_data->num_vfs = num_vfs;
451 
452 	/* loop through vf_info structures initializing each entry */
453 	for (i = 0; i < num_vfs; i++) {
454 		struct fm10k_vf_info *vf_info = &iov_data->vf_info[i];
455 		int err;
456 
457 		/* Record VF VSI value */
458 		vf_info->vsi = i + 1;
459 		vf_info->vf_idx = i;
460 
461 		/* initialize mailbox memory */
462 		err = fm10k_pfvf_mbx_init(hw, &vf_info->mbx, iov_mbx_data, i);
463 		if (err) {
464 			dev_err(&pdev->dev,
465 				"Unable to initialize SR-IOV mailbox\n");
466 			kfree(iov_data);
467 			return err;
468 		}
469 	}
470 
471 	/* assign iov_data to interface */
472 	interface->iov_data = iov_data;
473 
474 	/* allocate hardware resources for the VFs */
475 	fm10k_iov_resume(pdev);
476 
477 	return 0;
478 }
479 
480 void fm10k_iov_disable(struct pci_dev *pdev)
481 {
482 	if (pci_num_vf(pdev) && pci_vfs_assigned(pdev))
483 		dev_err(&pdev->dev,
484 			"Cannot disable SR-IOV while VFs are assigned\n");
485 	else
486 		pci_disable_sriov(pdev);
487 
488 	fm10k_iov_free_data(pdev);
489 }
490 
491 int fm10k_iov_configure(struct pci_dev *pdev, int num_vfs)
492 {
493 	int current_vfs = pci_num_vf(pdev);
494 	int err = 0;
495 
496 	if (current_vfs && pci_vfs_assigned(pdev)) {
497 		dev_err(&pdev->dev,
498 			"Cannot modify SR-IOV while VFs are assigned\n");
499 		num_vfs = current_vfs;
500 	} else {
501 		pci_disable_sriov(pdev);
502 		fm10k_iov_free_data(pdev);
503 	}
504 
505 	/* allocate resources for the VFs */
506 	err = fm10k_iov_alloc_data(pdev, num_vfs);
507 	if (err)
508 		return err;
509 
510 	/* allocate VFs if not already allocated */
511 	if (num_vfs && num_vfs != current_vfs) {
512 		err = pci_enable_sriov(pdev, num_vfs);
513 		if (err) {
514 			dev_err(&pdev->dev,
515 				"Enable PCI SR-IOV failed: %d\n", err);
516 			return err;
517 		}
518 	}
519 
520 	return num_vfs;
521 }
522 
523 static inline void fm10k_reset_vf_info(struct fm10k_intfc *interface,
524 				       struct fm10k_vf_info *vf_info)
525 {
526 	struct fm10k_hw *hw = &interface->hw;
527 
528 	/* assigning the MAC address will send a mailbox message */
529 	fm10k_mbx_lock(interface);
530 
531 	/* disable LPORT for this VF which clears switch rules */
532 	hw->iov.ops.reset_lport(hw, vf_info);
533 
534 	fm10k_clear_macvlan_queue(interface, vf_info->glort, false);
535 
536 	/* assign new MAC+VLAN for this VF */
537 	hw->iov.ops.assign_default_mac_vlan(hw, vf_info);
538 
539 	/* re-enable the LPORT for this VF */
540 	hw->iov.ops.set_lport(hw, vf_info, vf_info->vf_idx,
541 			      FM10K_VF_FLAG_MULTI_CAPABLE);
542 
543 	fm10k_mbx_unlock(interface);
544 }
545 
546 int fm10k_ndo_set_vf_mac(struct net_device *netdev, int vf_idx, u8 *mac)
547 {
548 	struct fm10k_intfc *interface = netdev_priv(netdev);
549 	struct fm10k_iov_data *iov_data = interface->iov_data;
550 	struct fm10k_vf_info *vf_info;
551 
552 	/* verify SR-IOV is active and that vf idx is valid */
553 	if (!iov_data || vf_idx >= iov_data->num_vfs)
554 		return -EINVAL;
555 
556 	/* verify MAC addr is valid */
557 	if (!is_zero_ether_addr(mac) && !is_valid_ether_addr(mac))
558 		return -EINVAL;
559 
560 	/* record new MAC address */
561 	vf_info = &iov_data->vf_info[vf_idx];
562 	ether_addr_copy(vf_info->mac, mac);
563 
564 	fm10k_reset_vf_info(interface, vf_info);
565 
566 	return 0;
567 }
568 
569 int fm10k_ndo_set_vf_vlan(struct net_device *netdev, int vf_idx, u16 vid,
570 			  u8 qos, __be16 vlan_proto)
571 {
572 	struct fm10k_intfc *interface = netdev_priv(netdev);
573 	struct fm10k_iov_data *iov_data = interface->iov_data;
574 	struct fm10k_hw *hw = &interface->hw;
575 	struct fm10k_vf_info *vf_info;
576 
577 	/* verify SR-IOV is active and that vf idx is valid */
578 	if (!iov_data || vf_idx >= iov_data->num_vfs)
579 		return -EINVAL;
580 
581 	/* QOS is unsupported and VLAN IDs accepted range 0-4094 */
582 	if (qos || (vid > (VLAN_VID_MASK - 1)))
583 		return -EINVAL;
584 
585 	/* VF VLAN Protocol part to default is unsupported */
586 	if (vlan_proto != htons(ETH_P_8021Q))
587 		return -EPROTONOSUPPORT;
588 
589 	vf_info = &iov_data->vf_info[vf_idx];
590 
591 	/* exit if there is nothing to do */
592 	if (vf_info->pf_vid == vid)
593 		return 0;
594 
595 	/* record default VLAN ID for VF */
596 	vf_info->pf_vid = vid;
597 
598 	/* Clear the VLAN table for the VF */
599 	hw->mac.ops.update_vlan(hw, FM10K_VLAN_ALL, vf_info->vsi, false);
600 
601 	fm10k_reset_vf_info(interface, vf_info);
602 
603 	return 0;
604 }
605 
606 int fm10k_ndo_set_vf_bw(struct net_device *netdev, int vf_idx,
607 			int __always_unused min_rate, int max_rate)
608 {
609 	struct fm10k_intfc *interface = netdev_priv(netdev);
610 	struct fm10k_iov_data *iov_data = interface->iov_data;
611 	struct fm10k_hw *hw = &interface->hw;
612 
613 	/* verify SR-IOV is active and that vf idx is valid */
614 	if (!iov_data || vf_idx >= iov_data->num_vfs)
615 		return -EINVAL;
616 
617 	/* rate limit cannot be less than 10Mbs or greater than link speed */
618 	if (max_rate &&
619 	    (max_rate < FM10K_VF_TC_MIN || max_rate > FM10K_VF_TC_MAX))
620 		return -EINVAL;
621 
622 	/* store values */
623 	iov_data->vf_info[vf_idx].rate = max_rate;
624 
625 	/* update hardware configuration */
626 	hw->iov.ops.configure_tc(hw, vf_idx, max_rate);
627 
628 	return 0;
629 }
630 
631 int fm10k_ndo_get_vf_config(struct net_device *netdev,
632 			    int vf_idx, struct ifla_vf_info *ivi)
633 {
634 	struct fm10k_intfc *interface = netdev_priv(netdev);
635 	struct fm10k_iov_data *iov_data = interface->iov_data;
636 	struct fm10k_vf_info *vf_info;
637 
638 	/* verify SR-IOV is active and that vf idx is valid */
639 	if (!iov_data || vf_idx >= iov_data->num_vfs)
640 		return -EINVAL;
641 
642 	vf_info = &iov_data->vf_info[vf_idx];
643 
644 	ivi->vf = vf_idx;
645 	ivi->max_tx_rate = vf_info->rate;
646 	ivi->min_tx_rate = 0;
647 	ether_addr_copy(ivi->mac, vf_info->mac);
648 	ivi->vlan = vf_info->pf_vid;
649 	ivi->qos = 0;
650 
651 	return 0;
652 }
653