1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright(c) 1999 - 2018 Intel Corporation. */
3 
4 #include <linux/netdevice.h>
5 #include <linux/module.h>
6 #include <linux/pci.h>
7 
8 #include "e1000.h"
9 
10 /* This is the only thing that needs to be changed to adjust the
11  * maximum number of ports that the driver can manage.
12  */
13 #define E1000_MAX_NIC 32
14 
15 #define OPTION_UNSET   -1
16 #define OPTION_DISABLED 0
17 #define OPTION_ENABLED  1
18 
19 #define COPYBREAK_DEFAULT 256
20 unsigned int copybreak = COPYBREAK_DEFAULT;
21 module_param(copybreak, uint, 0644);
22 MODULE_PARM_DESC(copybreak,
23 		 "Maximum size of packet that is copied to a new buffer on receive");
24 
25 /* All parameters are treated the same, as an integer array of values.
26  * This macro just reduces the need to repeat the same declaration code
27  * over and over (plus this helps to avoid typo bugs).
28  */
29 #define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
30 #define E1000_PARAM(X, desc)					\
31 	static int X[E1000_MAX_NIC+1] = E1000_PARAM_INIT;	\
32 	static unsigned int num_##X;				\
33 	module_param_array_named(X, X, int, &num_##X, 0);	\
34 	MODULE_PARM_DESC(X, desc);
35 
36 /* Transmit Interrupt Delay in units of 1.024 microseconds
37  * Tx interrupt delay needs to typically be set to something non-zero
38  *
39  * Valid Range: 0-65535
40  */
41 E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay");
42 #define DEFAULT_TIDV 8
43 #define MAX_TXDELAY 0xFFFF
44 #define MIN_TXDELAY 0
45 
46 /* Transmit Absolute Interrupt Delay in units of 1.024 microseconds
47  *
48  * Valid Range: 0-65535
49  */
50 E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");
51 #define DEFAULT_TADV 32
52 #define MAX_TXABSDELAY 0xFFFF
53 #define MIN_TXABSDELAY 0
54 
55 /* Receive Interrupt Delay in units of 1.024 microseconds
56  * hardware will likely hang if you set this to anything but zero.
57  *
58  * Burst variant is used as default if device has FLAG2_DMA_BURST.
59  *
60  * Valid Range: 0-65535
61  */
62 E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
63 #define DEFAULT_RDTR	0
64 #define BURST_RDTR	0x20
65 #define MAX_RXDELAY 0xFFFF
66 #define MIN_RXDELAY 0
67 
68 /* Receive Absolute Interrupt Delay in units of 1.024 microseconds
69  *
70  * Burst variant is used as default if device has FLAG2_DMA_BURST.
71  *
72  * Valid Range: 0-65535
73  */
74 E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
75 #define DEFAULT_RADV	8
76 #define BURST_RADV	0x20
77 #define MAX_RXABSDELAY 0xFFFF
78 #define MIN_RXABSDELAY 0
79 
80 /* Interrupt Throttle Rate (interrupts/sec)
81  *
82  * Valid Range: 100-100000 or one of: 0=off, 1=dynamic, 3=dynamic conservative
83  */
84 E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
85 #define DEFAULT_ITR 3
86 #define MAX_ITR 100000
87 #define MIN_ITR 100
88 
89 /* IntMode (Interrupt Mode)
90  *
91  * Valid Range: varies depending on kernel configuration & hardware support
92  *
93  * legacy=0, MSI=1, MSI-X=2
94  *
95  * When MSI/MSI-X support is enabled in kernel-
96  *   Default Value: 2 (MSI-X) when supported by hardware, 1 (MSI) otherwise
97  * When MSI/MSI-X support is not enabled in kernel-
98  *   Default Value: 0 (legacy)
99  *
100  * When a mode is specified that is not allowed/supported, it will be
101  * demoted to the most advanced interrupt mode available.
102  */
103 E1000_PARAM(IntMode, "Interrupt Mode");
104 #define MAX_INTMODE	2
105 #define MIN_INTMODE	0
106 
107 /* Enable Smart Power Down of the PHY
108  *
109  * Valid Range: 0, 1
110  *
111  * Default Value: 0 (disabled)
112  */
113 E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
114 
115 /* Enable Kumeran Lock Loss workaround
116  *
117  * Valid Range: 0, 1
118  *
119  * Default Value: 1 (enabled)
120  */
121 E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
122 
123 /* Write Protect NVM
124  *
125  * Valid Range: 0, 1
126  *
127  * Default Value: 1 (enabled)
128  */
129 E1000_PARAM(WriteProtectNVM,
130 	    "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]");
131 
132 /* Enable CRC Stripping
133  *
134  * Valid Range: 0, 1
135  *
136  * Default Value: 1 (enabled)
137  */
138 E1000_PARAM(CrcStripping,
139 	    "Enable CRC Stripping, disable if your BMC needs the CRC");
140 
141 struct e1000_option {
142 	enum { enable_option, range_option, list_option } type;
143 	const char *name;
144 	const char *err;
145 	int def;
146 	union {
147 		/* range_option info */
148 		struct {
149 			int min;
150 			int max;
151 		} r;
152 		/* list_option info */
153 		struct {
154 			int nr;
155 			struct e1000_opt_list {
156 				int i;
157 				char *str;
158 			} *p;
159 		} l;
160 	} arg;
161 };
162 
163 static int e1000_validate_option(unsigned int *value,
164 				 const struct e1000_option *opt,
165 				 struct e1000_adapter *adapter)
166 {
167 	if (*value == OPTION_UNSET) {
168 		*value = opt->def;
169 		return 0;
170 	}
171 
172 	switch (opt->type) {
173 	case enable_option:
174 		switch (*value) {
175 		case OPTION_ENABLED:
176 			dev_info(&adapter->pdev->dev, "%s Enabled\n",
177 				 opt->name);
178 			return 0;
179 		case OPTION_DISABLED:
180 			dev_info(&adapter->pdev->dev, "%s Disabled\n",
181 				 opt->name);
182 			return 0;
183 		}
184 		break;
185 	case range_option:
186 		if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
187 			dev_info(&adapter->pdev->dev, "%s set to %i\n",
188 				 opt->name, *value);
189 			return 0;
190 		}
191 		break;
192 	case list_option: {
193 		int i;
194 		struct e1000_opt_list *ent;
195 
196 		for (i = 0; i < opt->arg.l.nr; i++) {
197 			ent = &opt->arg.l.p[i];
198 			if (*value == ent->i) {
199 				if (ent->str[0] != '\0')
200 					dev_info(&adapter->pdev->dev, "%s\n",
201 						 ent->str);
202 				return 0;
203 			}
204 		}
205 	}
206 		break;
207 	default:
208 		BUG();
209 	}
210 
211 	dev_info(&adapter->pdev->dev, "Invalid %s value specified (%i) %s\n",
212 		 opt->name, *value, opt->err);
213 	*value = opt->def;
214 	return -1;
215 }
216 
217 /**
218  * e1000e_check_options - Range Checking for Command Line Parameters
219  * @adapter: board private structure
220  *
221  * This routine checks all command line parameters for valid user
222  * input.  If an invalid value is given, or if no user specified
223  * value exists, a default value is used.  The final value is stored
224  * in a variable in the adapter structure.
225  **/
226 void e1000e_check_options(struct e1000_adapter *adapter)
227 {
228 	struct e1000_hw *hw = &adapter->hw;
229 	int bd = adapter->bd_number;
230 
231 	if (bd >= E1000_MAX_NIC) {
232 		dev_notice(&adapter->pdev->dev,
233 			   "Warning: no configuration for board #%i\n", bd);
234 		dev_notice(&adapter->pdev->dev,
235 			   "Using defaults for all values\n");
236 	}
237 
238 	/* Transmit Interrupt Delay */
239 	{
240 		static const struct e1000_option opt = {
241 			.type = range_option,
242 			.name = "Transmit Interrupt Delay",
243 			.err  = "using default of "
244 				__MODULE_STRING(DEFAULT_TIDV),
245 			.def  = DEFAULT_TIDV,
246 			.arg  = { .r = { .min = MIN_TXDELAY,
247 					 .max = MAX_TXDELAY } }
248 		};
249 
250 		if (num_TxIntDelay > bd) {
251 			adapter->tx_int_delay = TxIntDelay[bd];
252 			e1000_validate_option(&adapter->tx_int_delay, &opt,
253 					      adapter);
254 		} else {
255 			adapter->tx_int_delay = opt.def;
256 		}
257 	}
258 	/* Transmit Absolute Interrupt Delay */
259 	{
260 		static const struct e1000_option opt = {
261 			.type = range_option,
262 			.name = "Transmit Absolute Interrupt Delay",
263 			.err  = "using default of "
264 				__MODULE_STRING(DEFAULT_TADV),
265 			.def  = DEFAULT_TADV,
266 			.arg  = { .r = { .min = MIN_TXABSDELAY,
267 					 .max = MAX_TXABSDELAY } }
268 		};
269 
270 		if (num_TxAbsIntDelay > bd) {
271 			adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
272 			e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
273 					      adapter);
274 		} else {
275 			adapter->tx_abs_int_delay = opt.def;
276 		}
277 	}
278 	/* Receive Interrupt Delay */
279 	{
280 		static struct e1000_option opt = {
281 			.type = range_option,
282 			.name = "Receive Interrupt Delay",
283 			.err  = "using default of "
284 				__MODULE_STRING(DEFAULT_RDTR),
285 			.def  = DEFAULT_RDTR,
286 			.arg  = { .r = { .min = MIN_RXDELAY,
287 					 .max = MAX_RXDELAY } }
288 		};
289 
290 		if (adapter->flags2 & FLAG2_DMA_BURST)
291 			opt.def = BURST_RDTR;
292 
293 		if (num_RxIntDelay > bd) {
294 			adapter->rx_int_delay = RxIntDelay[bd];
295 			e1000_validate_option(&adapter->rx_int_delay, &opt,
296 					      adapter);
297 		} else {
298 			adapter->rx_int_delay = opt.def;
299 		}
300 	}
301 	/* Receive Absolute Interrupt Delay */
302 	{
303 		static struct e1000_option opt = {
304 			.type = range_option,
305 			.name = "Receive Absolute Interrupt Delay",
306 			.err  = "using default of "
307 				__MODULE_STRING(DEFAULT_RADV),
308 			.def  = DEFAULT_RADV,
309 			.arg  = { .r = { .min = MIN_RXABSDELAY,
310 					 .max = MAX_RXABSDELAY } }
311 		};
312 
313 		if (adapter->flags2 & FLAG2_DMA_BURST)
314 			opt.def = BURST_RADV;
315 
316 		if (num_RxAbsIntDelay > bd) {
317 			adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
318 			e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
319 					      adapter);
320 		} else {
321 			adapter->rx_abs_int_delay = opt.def;
322 		}
323 	}
324 	/* Interrupt Throttling Rate */
325 	{
326 		static const struct e1000_option opt = {
327 			.type = range_option,
328 			.name = "Interrupt Throttling Rate (ints/sec)",
329 			.err  = "using default of "
330 				__MODULE_STRING(DEFAULT_ITR),
331 			.def  = DEFAULT_ITR,
332 			.arg  = { .r = { .min = MIN_ITR,
333 					 .max = MAX_ITR } }
334 		};
335 
336 		if (num_InterruptThrottleRate > bd) {
337 			adapter->itr = InterruptThrottleRate[bd];
338 
339 			/* Make sure a message is printed for non-special
340 			 * values. And in case of an invalid option, display
341 			 * warning, use default and go through itr/itr_setting
342 			 * adjustment logic below
343 			 */
344 			if ((adapter->itr > 4) &&
345 			    e1000_validate_option(&adapter->itr, &opt, adapter))
346 				adapter->itr = opt.def;
347 		} else {
348 			/* If no option specified, use default value and go
349 			 * through the logic below to adjust itr/itr_setting
350 			 */
351 			adapter->itr = opt.def;
352 
353 			/* Make sure a message is printed for non-special
354 			 * default values
355 			 */
356 			if (adapter->itr > 4)
357 				dev_info(&adapter->pdev->dev,
358 					 "%s set to default %d\n", opt.name,
359 					 adapter->itr);
360 		}
361 
362 		adapter->itr_setting = adapter->itr;
363 		switch (adapter->itr) {
364 		case 0:
365 			dev_info(&adapter->pdev->dev, "%s turned off\n",
366 				 opt.name);
367 			break;
368 		case 1:
369 			dev_info(&adapter->pdev->dev,
370 				 "%s set to dynamic mode\n", opt.name);
371 			adapter->itr = 20000;
372 			break;
373 		case 2:
374 			dev_info(&adapter->pdev->dev,
375 				 "%s Invalid mode - setting default\n",
376 				 opt.name);
377 			adapter->itr_setting = opt.def;
378 			/* fall-through */
379 		case 3:
380 			dev_info(&adapter->pdev->dev,
381 				 "%s set to dynamic conservative mode\n",
382 				 opt.name);
383 			adapter->itr = 20000;
384 			break;
385 		case 4:
386 			dev_info(&adapter->pdev->dev,
387 				 "%s set to simplified (2000-8000 ints) mode\n",
388 				 opt.name);
389 			break;
390 		default:
391 			/* Save the setting, because the dynamic bits
392 			 * change itr.
393 			 *
394 			 * Clear the lower two bits because
395 			 * they are used as control.
396 			 */
397 			adapter->itr_setting &= ~3;
398 			break;
399 		}
400 	}
401 	/* Interrupt Mode */
402 	{
403 		static struct e1000_option opt = {
404 			.type = range_option,
405 			.name = "Interrupt Mode",
406 #ifndef CONFIG_PCI_MSI
407 			.err  = "defaulting to 0 (legacy)",
408 			.def  = E1000E_INT_MODE_LEGACY,
409 			.arg  = { .r = { .min = 0,
410 					 .max = 0 } }
411 #endif
412 		};
413 
414 #ifdef CONFIG_PCI_MSI
415 		if (adapter->flags & FLAG_HAS_MSIX) {
416 			opt.err = kstrdup("defaulting to 2 (MSI-X)",
417 					  GFP_KERNEL);
418 			opt.def = E1000E_INT_MODE_MSIX;
419 			opt.arg.r.max = E1000E_INT_MODE_MSIX;
420 		} else {
421 			opt.err = kstrdup("defaulting to 1 (MSI)", GFP_KERNEL);
422 			opt.def = E1000E_INT_MODE_MSI;
423 			opt.arg.r.max = E1000E_INT_MODE_MSI;
424 		}
425 
426 		if (!opt.err) {
427 			dev_err(&adapter->pdev->dev,
428 				"Failed to allocate memory\n");
429 			return;
430 		}
431 #endif
432 
433 		if (num_IntMode > bd) {
434 			unsigned int int_mode = IntMode[bd];
435 
436 			e1000_validate_option(&int_mode, &opt, adapter);
437 			adapter->int_mode = int_mode;
438 		} else {
439 			adapter->int_mode = opt.def;
440 		}
441 
442 #ifdef CONFIG_PCI_MSI
443 		kfree(opt.err);
444 #endif
445 	}
446 	/* Smart Power Down */
447 	{
448 		static const struct e1000_option opt = {
449 			.type = enable_option,
450 			.name = "PHY Smart Power Down",
451 			.err  = "defaulting to Disabled",
452 			.def  = OPTION_DISABLED
453 		};
454 
455 		if (num_SmartPowerDownEnable > bd) {
456 			unsigned int spd = SmartPowerDownEnable[bd];
457 
458 			e1000_validate_option(&spd, &opt, adapter);
459 			if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) && spd)
460 				adapter->flags |= FLAG_SMART_POWER_DOWN;
461 		}
462 	}
463 	/* CRC Stripping */
464 	{
465 		static const struct e1000_option opt = {
466 			.type = enable_option,
467 			.name = "CRC Stripping",
468 			.err  = "defaulting to Enabled",
469 			.def  = OPTION_ENABLED
470 		};
471 
472 		if (num_CrcStripping > bd) {
473 			unsigned int crc_stripping = CrcStripping[bd];
474 
475 			e1000_validate_option(&crc_stripping, &opt, adapter);
476 			if (crc_stripping == OPTION_ENABLED) {
477 				adapter->flags2 |= FLAG2_CRC_STRIPPING;
478 				adapter->flags2 |= FLAG2_DFLT_CRC_STRIPPING;
479 			}
480 		} else {
481 			adapter->flags2 |= FLAG2_CRC_STRIPPING;
482 			adapter->flags2 |= FLAG2_DFLT_CRC_STRIPPING;
483 		}
484 	}
485 	/* Kumeran Lock Loss Workaround */
486 	{
487 		static const struct e1000_option opt = {
488 			.type = enable_option,
489 			.name = "Kumeran Lock Loss Workaround",
490 			.err  = "defaulting to Enabled",
491 			.def  = OPTION_ENABLED
492 		};
493 		bool enabled = opt.def;
494 
495 		if (num_KumeranLockLoss > bd) {
496 			unsigned int kmrn_lock_loss = KumeranLockLoss[bd];
497 
498 			e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
499 			enabled = kmrn_lock_loss;
500 		}
501 
502 		if (hw->mac.type == e1000_ich8lan)
503 			e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
504 								     enabled);
505 	}
506 	/* Write-protect NVM */
507 	{
508 		static const struct e1000_option opt = {
509 			.type = enable_option,
510 			.name = "Write-protect NVM",
511 			.err  = "defaulting to Enabled",
512 			.def  = OPTION_ENABLED
513 		};
514 
515 		if (adapter->flags & FLAG_IS_ICH) {
516 			if (num_WriteProtectNVM > bd) {
517 				unsigned int write_protect_nvm =
518 				    WriteProtectNVM[bd];
519 				e1000_validate_option(&write_protect_nvm, &opt,
520 						      adapter);
521 				if (write_protect_nvm)
522 					adapter->flags |= FLAG_READ_ONLY_NVM;
523 			} else {
524 				if (opt.def)
525 					adapter->flags |= FLAG_READ_ONLY_NVM;
526 			}
527 		}
528 	}
529 }
530