1 /******************************************************************************* 2 3 Intel PRO/1000 Linux driver 4 Copyright(c) 1999 - 2013 Intel Corporation. 5 6 This program is free software; you can redistribute it and/or modify it 7 under the terms and conditions of the GNU General Public License, 8 version 2, as published by the Free Software Foundation. 9 10 This program is distributed in the hope it will be useful, but WITHOUT 11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 13 more details. 14 15 You should have received a copy of the GNU General Public License along with 16 this program; if not, write to the Free Software Foundation, Inc., 17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 18 19 The full GNU General Public License is included in this distribution in 20 the file called "COPYING". 21 22 Contact Information: 23 Linux NICS <linux.nics@intel.com> 24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> 25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 26 27 *******************************************************************************/ 28 29 /* 82571EB Gigabit Ethernet Controller 30 * 82571EB Gigabit Ethernet Controller (Copper) 31 * 82571EB Gigabit Ethernet Controller (Fiber) 32 * 82571EB Dual Port Gigabit Mezzanine Adapter 33 * 82571EB Quad Port Gigabit Mezzanine Adapter 34 * 82571PT Gigabit PT Quad Port Server ExpressModule 35 * 82572EI Gigabit Ethernet Controller (Copper) 36 * 82572EI Gigabit Ethernet Controller (Fiber) 37 * 82572EI Gigabit Ethernet Controller 38 * 82573V Gigabit Ethernet Controller (Copper) 39 * 82573E Gigabit Ethernet Controller (Copper) 40 * 82573L Gigabit Ethernet Controller 41 * 82574L Gigabit Network Connection 42 * 82583V Gigabit Network Connection 43 */ 44 45 #include "e1000.h" 46 47 static s32 e1000_get_phy_id_82571(struct e1000_hw *hw); 48 static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw); 49 static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw); 50 static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw); 51 static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, 52 u16 words, u16 *data); 53 static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw); 54 static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw); 55 static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw); 56 static bool e1000_check_mng_mode_82574(struct e1000_hw *hw); 57 static s32 e1000_led_on_82574(struct e1000_hw *hw); 58 static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw); 59 static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw); 60 static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw); 61 static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw); 62 static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw); 63 static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active); 64 static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active); 65 66 /** 67 * e1000_init_phy_params_82571 - Init PHY func ptrs. 68 * @hw: pointer to the HW structure 69 **/ 70 static s32 e1000_init_phy_params_82571(struct e1000_hw *hw) 71 { 72 struct e1000_phy_info *phy = &hw->phy; 73 s32 ret_val; 74 75 if (hw->phy.media_type != e1000_media_type_copper) { 76 phy->type = e1000_phy_none; 77 return 0; 78 } 79 80 phy->addr = 1; 81 phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; 82 phy->reset_delay_us = 100; 83 84 phy->ops.power_up = e1000_power_up_phy_copper; 85 phy->ops.power_down = e1000_power_down_phy_copper_82571; 86 87 switch (hw->mac.type) { 88 case e1000_82571: 89 case e1000_82572: 90 phy->type = e1000_phy_igp_2; 91 break; 92 case e1000_82573: 93 phy->type = e1000_phy_m88; 94 break; 95 case e1000_82574: 96 case e1000_82583: 97 phy->type = e1000_phy_bm; 98 phy->ops.acquire = e1000_get_hw_semaphore_82574; 99 phy->ops.release = e1000_put_hw_semaphore_82574; 100 phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82574; 101 phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82574; 102 break; 103 default: 104 return -E1000_ERR_PHY; 105 break; 106 } 107 108 /* This can only be done after all function pointers are setup. */ 109 ret_val = e1000_get_phy_id_82571(hw); 110 if (ret_val) { 111 e_dbg("Error getting PHY ID\n"); 112 return ret_val; 113 } 114 115 /* Verify phy id */ 116 switch (hw->mac.type) { 117 case e1000_82571: 118 case e1000_82572: 119 if (phy->id != IGP01E1000_I_PHY_ID) 120 ret_val = -E1000_ERR_PHY; 121 break; 122 case e1000_82573: 123 if (phy->id != M88E1111_I_PHY_ID) 124 ret_val = -E1000_ERR_PHY; 125 break; 126 case e1000_82574: 127 case e1000_82583: 128 if (phy->id != BME1000_E_PHY_ID_R2) 129 ret_val = -E1000_ERR_PHY; 130 break; 131 default: 132 ret_val = -E1000_ERR_PHY; 133 break; 134 } 135 136 if (ret_val) 137 e_dbg("PHY ID unknown: type = 0x%08x\n", phy->id); 138 139 return ret_val; 140 } 141 142 /** 143 * e1000_init_nvm_params_82571 - Init NVM func ptrs. 144 * @hw: pointer to the HW structure 145 **/ 146 static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw) 147 { 148 struct e1000_nvm_info *nvm = &hw->nvm; 149 u32 eecd = er32(EECD); 150 u16 size; 151 152 nvm->opcode_bits = 8; 153 nvm->delay_usec = 1; 154 switch (nvm->override) { 155 case e1000_nvm_override_spi_large: 156 nvm->page_size = 32; 157 nvm->address_bits = 16; 158 break; 159 case e1000_nvm_override_spi_small: 160 nvm->page_size = 8; 161 nvm->address_bits = 8; 162 break; 163 default: 164 nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8; 165 nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8; 166 break; 167 } 168 169 switch (hw->mac.type) { 170 case e1000_82573: 171 case e1000_82574: 172 case e1000_82583: 173 if (((eecd >> 15) & 0x3) == 0x3) { 174 nvm->type = e1000_nvm_flash_hw; 175 nvm->word_size = 2048; 176 /* Autonomous Flash update bit must be cleared due 177 * to Flash update issue. 178 */ 179 eecd &= ~E1000_EECD_AUPDEN; 180 ew32(EECD, eecd); 181 break; 182 } 183 /* Fall Through */ 184 default: 185 nvm->type = e1000_nvm_eeprom_spi; 186 size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> 187 E1000_EECD_SIZE_EX_SHIFT); 188 /* Added to a constant, "size" becomes the left-shift value 189 * for setting word_size. 190 */ 191 size += NVM_WORD_SIZE_BASE_SHIFT; 192 193 /* EEPROM access above 16k is unsupported */ 194 if (size > 14) 195 size = 14; 196 nvm->word_size = 1 << size; 197 break; 198 } 199 200 /* Function Pointers */ 201 switch (hw->mac.type) { 202 case e1000_82574: 203 case e1000_82583: 204 nvm->ops.acquire = e1000_get_hw_semaphore_82574; 205 nvm->ops.release = e1000_put_hw_semaphore_82574; 206 break; 207 default: 208 break; 209 } 210 211 return 0; 212 } 213 214 /** 215 * e1000_init_mac_params_82571 - Init MAC func ptrs. 216 * @hw: pointer to the HW structure 217 **/ 218 static s32 e1000_init_mac_params_82571(struct e1000_hw *hw) 219 { 220 struct e1000_mac_info *mac = &hw->mac; 221 u32 swsm = 0; 222 u32 swsm2 = 0; 223 bool force_clear_smbi = false; 224 225 /* Set media type and media-dependent function pointers */ 226 switch (hw->adapter->pdev->device) { 227 case E1000_DEV_ID_82571EB_FIBER: 228 case E1000_DEV_ID_82572EI_FIBER: 229 case E1000_DEV_ID_82571EB_QUAD_FIBER: 230 hw->phy.media_type = e1000_media_type_fiber; 231 mac->ops.setup_physical_interface = 232 e1000_setup_fiber_serdes_link_82571; 233 mac->ops.check_for_link = e1000e_check_for_fiber_link; 234 mac->ops.get_link_up_info = 235 e1000e_get_speed_and_duplex_fiber_serdes; 236 break; 237 case E1000_DEV_ID_82571EB_SERDES: 238 case E1000_DEV_ID_82571EB_SERDES_DUAL: 239 case E1000_DEV_ID_82571EB_SERDES_QUAD: 240 case E1000_DEV_ID_82572EI_SERDES: 241 hw->phy.media_type = e1000_media_type_internal_serdes; 242 mac->ops.setup_physical_interface = 243 e1000_setup_fiber_serdes_link_82571; 244 mac->ops.check_for_link = e1000_check_for_serdes_link_82571; 245 mac->ops.get_link_up_info = 246 e1000e_get_speed_and_duplex_fiber_serdes; 247 break; 248 default: 249 hw->phy.media_type = e1000_media_type_copper; 250 mac->ops.setup_physical_interface = 251 e1000_setup_copper_link_82571; 252 mac->ops.check_for_link = e1000e_check_for_copper_link; 253 mac->ops.get_link_up_info = e1000e_get_speed_and_duplex_copper; 254 break; 255 } 256 257 /* Set mta register count */ 258 mac->mta_reg_count = 128; 259 /* Set rar entry count */ 260 mac->rar_entry_count = E1000_RAR_ENTRIES; 261 /* Adaptive IFS supported */ 262 mac->adaptive_ifs = true; 263 264 /* MAC-specific function pointers */ 265 switch (hw->mac.type) { 266 case e1000_82573: 267 mac->ops.set_lan_id = e1000_set_lan_id_single_port; 268 mac->ops.check_mng_mode = e1000e_check_mng_mode_generic; 269 mac->ops.led_on = e1000e_led_on_generic; 270 mac->ops.blink_led = e1000e_blink_led_generic; 271 272 /* FWSM register */ 273 mac->has_fwsm = true; 274 /* ARC supported; valid only if manageability features are 275 * enabled. 276 */ 277 mac->arc_subsystem_valid = !!(er32(FWSM) & 278 E1000_FWSM_MODE_MASK); 279 break; 280 case e1000_82574: 281 case e1000_82583: 282 mac->ops.set_lan_id = e1000_set_lan_id_single_port; 283 mac->ops.check_mng_mode = e1000_check_mng_mode_82574; 284 mac->ops.led_on = e1000_led_on_82574; 285 break; 286 default: 287 mac->ops.check_mng_mode = e1000e_check_mng_mode_generic; 288 mac->ops.led_on = e1000e_led_on_generic; 289 mac->ops.blink_led = e1000e_blink_led_generic; 290 291 /* FWSM register */ 292 mac->has_fwsm = true; 293 break; 294 } 295 296 /* Ensure that the inter-port SWSM.SMBI lock bit is clear before 297 * first NVM or PHY access. This should be done for single-port 298 * devices, and for one port only on dual-port devices so that 299 * for those devices we can still use the SMBI lock to synchronize 300 * inter-port accesses to the PHY & NVM. 301 */ 302 switch (hw->mac.type) { 303 case e1000_82571: 304 case e1000_82572: 305 swsm2 = er32(SWSM2); 306 307 if (!(swsm2 & E1000_SWSM2_LOCK)) { 308 /* Only do this for the first interface on this card */ 309 ew32(SWSM2, swsm2 | E1000_SWSM2_LOCK); 310 force_clear_smbi = true; 311 } else { 312 force_clear_smbi = false; 313 } 314 break; 315 default: 316 force_clear_smbi = true; 317 break; 318 } 319 320 if (force_clear_smbi) { 321 /* Make sure SWSM.SMBI is clear */ 322 swsm = er32(SWSM); 323 if (swsm & E1000_SWSM_SMBI) { 324 /* This bit should not be set on a first interface, and 325 * indicates that the bootagent or EFI code has 326 * improperly left this bit enabled 327 */ 328 e_dbg("Please update your 82571 Bootagent\n"); 329 } 330 ew32(SWSM, swsm & ~E1000_SWSM_SMBI); 331 } 332 333 /* Initialize device specific counter of SMBI acquisition timeouts. */ 334 hw->dev_spec.e82571.smb_counter = 0; 335 336 return 0; 337 } 338 339 static s32 e1000_get_variants_82571(struct e1000_adapter *adapter) 340 { 341 struct e1000_hw *hw = &adapter->hw; 342 static int global_quad_port_a; /* global port a indication */ 343 struct pci_dev *pdev = adapter->pdev; 344 int is_port_b = er32(STATUS) & E1000_STATUS_FUNC_1; 345 s32 rc; 346 347 rc = e1000_init_mac_params_82571(hw); 348 if (rc) 349 return rc; 350 351 rc = e1000_init_nvm_params_82571(hw); 352 if (rc) 353 return rc; 354 355 rc = e1000_init_phy_params_82571(hw); 356 if (rc) 357 return rc; 358 359 /* tag quad port adapters first, it's used below */ 360 switch (pdev->device) { 361 case E1000_DEV_ID_82571EB_QUAD_COPPER: 362 case E1000_DEV_ID_82571EB_QUAD_FIBER: 363 case E1000_DEV_ID_82571EB_QUAD_COPPER_LP: 364 case E1000_DEV_ID_82571PT_QUAD_COPPER: 365 adapter->flags |= FLAG_IS_QUAD_PORT; 366 /* mark the first port */ 367 if (global_quad_port_a == 0) 368 adapter->flags |= FLAG_IS_QUAD_PORT_A; 369 /* Reset for multiple quad port adapters */ 370 global_quad_port_a++; 371 if (global_quad_port_a == 4) 372 global_quad_port_a = 0; 373 break; 374 default: 375 break; 376 } 377 378 switch (adapter->hw.mac.type) { 379 case e1000_82571: 380 /* these dual ports don't have WoL on port B at all */ 381 if (((pdev->device == E1000_DEV_ID_82571EB_FIBER) || 382 (pdev->device == E1000_DEV_ID_82571EB_SERDES) || 383 (pdev->device == E1000_DEV_ID_82571EB_COPPER)) && 384 (is_port_b)) 385 adapter->flags &= ~FLAG_HAS_WOL; 386 /* quad ports only support WoL on port A */ 387 if (adapter->flags & FLAG_IS_QUAD_PORT && 388 (!(adapter->flags & FLAG_IS_QUAD_PORT_A))) 389 adapter->flags &= ~FLAG_HAS_WOL; 390 /* Does not support WoL on any port */ 391 if (pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD) 392 adapter->flags &= ~FLAG_HAS_WOL; 393 break; 394 case e1000_82573: 395 if (pdev->device == E1000_DEV_ID_82573L) { 396 adapter->flags |= FLAG_HAS_JUMBO_FRAMES; 397 adapter->max_hw_frame_size = DEFAULT_JUMBO; 398 } 399 break; 400 default: 401 break; 402 } 403 404 return 0; 405 } 406 407 /** 408 * e1000_get_phy_id_82571 - Retrieve the PHY ID and revision 409 * @hw: pointer to the HW structure 410 * 411 * Reads the PHY registers and stores the PHY ID and possibly the PHY 412 * revision in the hardware structure. 413 **/ 414 static s32 e1000_get_phy_id_82571(struct e1000_hw *hw) 415 { 416 struct e1000_phy_info *phy = &hw->phy; 417 s32 ret_val; 418 u16 phy_id = 0; 419 420 switch (hw->mac.type) { 421 case e1000_82571: 422 case e1000_82572: 423 /* The 82571 firmware may still be configuring the PHY. 424 * In this case, we cannot access the PHY until the 425 * configuration is done. So we explicitly set the 426 * PHY ID. 427 */ 428 phy->id = IGP01E1000_I_PHY_ID; 429 break; 430 case e1000_82573: 431 return e1000e_get_phy_id(hw); 432 break; 433 case e1000_82574: 434 case e1000_82583: 435 ret_val = e1e_rphy(hw, MII_PHYSID1, &phy_id); 436 if (ret_val) 437 return ret_val; 438 439 phy->id = (u32)(phy_id << 16); 440 usleep_range(20, 40); 441 ret_val = e1e_rphy(hw, MII_PHYSID2, &phy_id); 442 if (ret_val) 443 return ret_val; 444 445 phy->id |= (u32)(phy_id); 446 phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK); 447 break; 448 default: 449 return -E1000_ERR_PHY; 450 break; 451 } 452 453 return 0; 454 } 455 456 /** 457 * e1000_get_hw_semaphore_82571 - Acquire hardware semaphore 458 * @hw: pointer to the HW structure 459 * 460 * Acquire the HW semaphore to access the PHY or NVM 461 **/ 462 static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw) 463 { 464 u32 swsm; 465 s32 sw_timeout = hw->nvm.word_size + 1; 466 s32 fw_timeout = hw->nvm.word_size + 1; 467 s32 i = 0; 468 469 /* If we have timedout 3 times on trying to acquire 470 * the inter-port SMBI semaphore, there is old code 471 * operating on the other port, and it is not 472 * releasing SMBI. Modify the number of times that 473 * we try for the semaphore to interwork with this 474 * older code. 475 */ 476 if (hw->dev_spec.e82571.smb_counter > 2) 477 sw_timeout = 1; 478 479 /* Get the SW semaphore */ 480 while (i < sw_timeout) { 481 swsm = er32(SWSM); 482 if (!(swsm & E1000_SWSM_SMBI)) 483 break; 484 485 usleep_range(50, 100); 486 i++; 487 } 488 489 if (i == sw_timeout) { 490 e_dbg("Driver can't access device - SMBI bit is set.\n"); 491 hw->dev_spec.e82571.smb_counter++; 492 } 493 /* Get the FW semaphore. */ 494 for (i = 0; i < fw_timeout; i++) { 495 swsm = er32(SWSM); 496 ew32(SWSM, swsm | E1000_SWSM_SWESMBI); 497 498 /* Semaphore acquired if bit latched */ 499 if (er32(SWSM) & E1000_SWSM_SWESMBI) 500 break; 501 502 usleep_range(50, 100); 503 } 504 505 if (i == fw_timeout) { 506 /* Release semaphores */ 507 e1000_put_hw_semaphore_82571(hw); 508 e_dbg("Driver can't access the NVM\n"); 509 return -E1000_ERR_NVM; 510 } 511 512 return 0; 513 } 514 515 /** 516 * e1000_put_hw_semaphore_82571 - Release hardware semaphore 517 * @hw: pointer to the HW structure 518 * 519 * Release hardware semaphore used to access the PHY or NVM 520 **/ 521 static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw) 522 { 523 u32 swsm; 524 525 swsm = er32(SWSM); 526 swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI); 527 ew32(SWSM, swsm); 528 } 529 530 /** 531 * e1000_get_hw_semaphore_82573 - Acquire hardware semaphore 532 * @hw: pointer to the HW structure 533 * 534 * Acquire the HW semaphore during reset. 535 * 536 **/ 537 static s32 e1000_get_hw_semaphore_82573(struct e1000_hw *hw) 538 { 539 u32 extcnf_ctrl; 540 s32 i = 0; 541 542 extcnf_ctrl = er32(EXTCNF_CTRL); 543 do { 544 extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; 545 ew32(EXTCNF_CTRL, extcnf_ctrl); 546 extcnf_ctrl = er32(EXTCNF_CTRL); 547 548 if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP) 549 break; 550 551 usleep_range(2000, 4000); 552 i++; 553 } while (i < MDIO_OWNERSHIP_TIMEOUT); 554 555 if (i == MDIO_OWNERSHIP_TIMEOUT) { 556 /* Release semaphores */ 557 e1000_put_hw_semaphore_82573(hw); 558 e_dbg("Driver can't access the PHY\n"); 559 return -E1000_ERR_PHY; 560 } 561 562 return 0; 563 } 564 565 /** 566 * e1000_put_hw_semaphore_82573 - Release hardware semaphore 567 * @hw: pointer to the HW structure 568 * 569 * Release hardware semaphore used during reset. 570 * 571 **/ 572 static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw) 573 { 574 u32 extcnf_ctrl; 575 576 extcnf_ctrl = er32(EXTCNF_CTRL); 577 extcnf_ctrl &= ~E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; 578 ew32(EXTCNF_CTRL, extcnf_ctrl); 579 } 580 581 static DEFINE_MUTEX(swflag_mutex); 582 583 /** 584 * e1000_get_hw_semaphore_82574 - Acquire hardware semaphore 585 * @hw: pointer to the HW structure 586 * 587 * Acquire the HW semaphore to access the PHY or NVM. 588 * 589 **/ 590 static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw) 591 { 592 s32 ret_val; 593 594 mutex_lock(&swflag_mutex); 595 ret_val = e1000_get_hw_semaphore_82573(hw); 596 if (ret_val) 597 mutex_unlock(&swflag_mutex); 598 return ret_val; 599 } 600 601 /** 602 * e1000_put_hw_semaphore_82574 - Release hardware semaphore 603 * @hw: pointer to the HW structure 604 * 605 * Release hardware semaphore used to access the PHY or NVM 606 * 607 **/ 608 static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw) 609 { 610 e1000_put_hw_semaphore_82573(hw); 611 mutex_unlock(&swflag_mutex); 612 } 613 614 /** 615 * e1000_set_d0_lplu_state_82574 - Set Low Power Linkup D0 state 616 * @hw: pointer to the HW structure 617 * @active: true to enable LPLU, false to disable 618 * 619 * Sets the LPLU D0 state according to the active flag. 620 * LPLU will not be activated unless the 621 * device autonegotiation advertisement meets standards of 622 * either 10 or 10/100 or 10/100/1000 at all duplexes. 623 * This is a function pointer entry point only called by 624 * PHY setup routines. 625 **/ 626 static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active) 627 { 628 u32 data = er32(POEMB); 629 630 if (active) 631 data |= E1000_PHY_CTRL_D0A_LPLU; 632 else 633 data &= ~E1000_PHY_CTRL_D0A_LPLU; 634 635 ew32(POEMB, data); 636 return 0; 637 } 638 639 /** 640 * e1000_set_d3_lplu_state_82574 - Sets low power link up state for D3 641 * @hw: pointer to the HW structure 642 * @active: boolean used to enable/disable lplu 643 * 644 * The low power link up (lplu) state is set to the power management level D3 645 * when active is true, else clear lplu for D3. LPLU 646 * is used during Dx states where the power conservation is most important. 647 * During driver activity, SmartSpeed should be enabled so performance is 648 * maintained. 649 **/ 650 static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active) 651 { 652 u32 data = er32(POEMB); 653 654 if (!active) { 655 data &= ~E1000_PHY_CTRL_NOND0A_LPLU; 656 } else if ((hw->phy.autoneg_advertised == E1000_ALL_SPEED_DUPLEX) || 657 (hw->phy.autoneg_advertised == E1000_ALL_NOT_GIG) || 658 (hw->phy.autoneg_advertised == E1000_ALL_10_SPEED)) { 659 data |= E1000_PHY_CTRL_NOND0A_LPLU; 660 } 661 662 ew32(POEMB, data); 663 return 0; 664 } 665 666 /** 667 * e1000_acquire_nvm_82571 - Request for access to the EEPROM 668 * @hw: pointer to the HW structure 669 * 670 * To gain access to the EEPROM, first we must obtain a hardware semaphore. 671 * Then for non-82573 hardware, set the EEPROM access request bit and wait 672 * for EEPROM access grant bit. If the access grant bit is not set, release 673 * hardware semaphore. 674 **/ 675 static s32 e1000_acquire_nvm_82571(struct e1000_hw *hw) 676 { 677 s32 ret_val; 678 679 ret_val = e1000_get_hw_semaphore_82571(hw); 680 if (ret_val) 681 return ret_val; 682 683 switch (hw->mac.type) { 684 case e1000_82573: 685 break; 686 default: 687 ret_val = e1000e_acquire_nvm(hw); 688 break; 689 } 690 691 if (ret_val) 692 e1000_put_hw_semaphore_82571(hw); 693 694 return ret_val; 695 } 696 697 /** 698 * e1000_release_nvm_82571 - Release exclusive access to EEPROM 699 * @hw: pointer to the HW structure 700 * 701 * Stop any current commands to the EEPROM and clear the EEPROM request bit. 702 **/ 703 static void e1000_release_nvm_82571(struct e1000_hw *hw) 704 { 705 e1000e_release_nvm(hw); 706 e1000_put_hw_semaphore_82571(hw); 707 } 708 709 /** 710 * e1000_write_nvm_82571 - Write to EEPROM using appropriate interface 711 * @hw: pointer to the HW structure 712 * @offset: offset within the EEPROM to be written to 713 * @words: number of words to write 714 * @data: 16 bit word(s) to be written to the EEPROM 715 * 716 * For non-82573 silicon, write data to EEPROM at offset using SPI interface. 717 * 718 * If e1000e_update_nvm_checksum is not called after this function, the 719 * EEPROM will most likely contain an invalid checksum. 720 **/ 721 static s32 e1000_write_nvm_82571(struct e1000_hw *hw, u16 offset, u16 words, 722 u16 *data) 723 { 724 s32 ret_val; 725 726 switch (hw->mac.type) { 727 case e1000_82573: 728 case e1000_82574: 729 case e1000_82583: 730 ret_val = e1000_write_nvm_eewr_82571(hw, offset, words, data); 731 break; 732 case e1000_82571: 733 case e1000_82572: 734 ret_val = e1000e_write_nvm_spi(hw, offset, words, data); 735 break; 736 default: 737 ret_val = -E1000_ERR_NVM; 738 break; 739 } 740 741 return ret_val; 742 } 743 744 /** 745 * e1000_update_nvm_checksum_82571 - Update EEPROM checksum 746 * @hw: pointer to the HW structure 747 * 748 * Updates the EEPROM checksum by reading/adding each word of the EEPROM 749 * up to the checksum. Then calculates the EEPROM checksum and writes the 750 * value to the EEPROM. 751 **/ 752 static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw) 753 { 754 u32 eecd; 755 s32 ret_val; 756 u16 i; 757 758 ret_val = e1000e_update_nvm_checksum_generic(hw); 759 if (ret_val) 760 return ret_val; 761 762 /* If our nvm is an EEPROM, then we're done 763 * otherwise, commit the checksum to the flash NVM. 764 */ 765 if (hw->nvm.type != e1000_nvm_flash_hw) 766 return 0; 767 768 /* Check for pending operations. */ 769 for (i = 0; i < E1000_FLASH_UPDATES; i++) { 770 usleep_range(1000, 2000); 771 if (!(er32(EECD) & E1000_EECD_FLUPD)) 772 break; 773 } 774 775 if (i == E1000_FLASH_UPDATES) 776 return -E1000_ERR_NVM; 777 778 /* Reset the firmware if using STM opcode. */ 779 if ((er32(FLOP) & 0xFF00) == E1000_STM_OPCODE) { 780 /* The enabling of and the actual reset must be done 781 * in two write cycles. 782 */ 783 ew32(HICR, E1000_HICR_FW_RESET_ENABLE); 784 e1e_flush(); 785 ew32(HICR, E1000_HICR_FW_RESET); 786 } 787 788 /* Commit the write to flash */ 789 eecd = er32(EECD) | E1000_EECD_FLUPD; 790 ew32(EECD, eecd); 791 792 for (i = 0; i < E1000_FLASH_UPDATES; i++) { 793 usleep_range(1000, 2000); 794 if (!(er32(EECD) & E1000_EECD_FLUPD)) 795 break; 796 } 797 798 if (i == E1000_FLASH_UPDATES) 799 return -E1000_ERR_NVM; 800 801 return 0; 802 } 803 804 /** 805 * e1000_validate_nvm_checksum_82571 - Validate EEPROM checksum 806 * @hw: pointer to the HW structure 807 * 808 * Calculates the EEPROM checksum by reading/adding each word of the EEPROM 809 * and then verifies that the sum of the EEPROM is equal to 0xBABA. 810 **/ 811 static s32 e1000_validate_nvm_checksum_82571(struct e1000_hw *hw) 812 { 813 if (hw->nvm.type == e1000_nvm_flash_hw) 814 e1000_fix_nvm_checksum_82571(hw); 815 816 return e1000e_validate_nvm_checksum_generic(hw); 817 } 818 819 /** 820 * e1000_write_nvm_eewr_82571 - Write to EEPROM for 82573 silicon 821 * @hw: pointer to the HW structure 822 * @offset: offset within the EEPROM to be written to 823 * @words: number of words to write 824 * @data: 16 bit word(s) to be written to the EEPROM 825 * 826 * After checking for invalid values, poll the EEPROM to ensure the previous 827 * command has completed before trying to write the next word. After write 828 * poll for completion. 829 * 830 * If e1000e_update_nvm_checksum is not called after this function, the 831 * EEPROM will most likely contain an invalid checksum. 832 **/ 833 static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, 834 u16 words, u16 *data) 835 { 836 struct e1000_nvm_info *nvm = &hw->nvm; 837 u32 i, eewr = 0; 838 s32 ret_val = 0; 839 840 /* A check for invalid values: offset too large, too many words, 841 * and not enough words. 842 */ 843 if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || 844 (words == 0)) { 845 e_dbg("nvm parameter(s) out of bounds\n"); 846 return -E1000_ERR_NVM; 847 } 848 849 for (i = 0; i < words; i++) { 850 eewr = ((data[i] << E1000_NVM_RW_REG_DATA) | 851 ((offset + i) << E1000_NVM_RW_ADDR_SHIFT) | 852 E1000_NVM_RW_REG_START); 853 854 ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE); 855 if (ret_val) 856 break; 857 858 ew32(EEWR, eewr); 859 860 ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE); 861 if (ret_val) 862 break; 863 } 864 865 return ret_val; 866 } 867 868 /** 869 * e1000_get_cfg_done_82571 - Poll for configuration done 870 * @hw: pointer to the HW structure 871 * 872 * Reads the management control register for the config done bit to be set. 873 **/ 874 static s32 e1000_get_cfg_done_82571(struct e1000_hw *hw) 875 { 876 s32 timeout = PHY_CFG_TIMEOUT; 877 878 while (timeout) { 879 if (er32(EEMNGCTL) & E1000_NVM_CFG_DONE_PORT_0) 880 break; 881 usleep_range(1000, 2000); 882 timeout--; 883 } 884 if (!timeout) { 885 e_dbg("MNG configuration cycle has not completed.\n"); 886 return -E1000_ERR_RESET; 887 } 888 889 return 0; 890 } 891 892 /** 893 * e1000_set_d0_lplu_state_82571 - Set Low Power Linkup D0 state 894 * @hw: pointer to the HW structure 895 * @active: true to enable LPLU, false to disable 896 * 897 * Sets the LPLU D0 state according to the active flag. When activating LPLU 898 * this function also disables smart speed and vice versa. LPLU will not be 899 * activated unless the device autonegotiation advertisement meets standards 900 * of either 10 or 10/100 or 10/100/1000 at all duplexes. This is a function 901 * pointer entry point only called by PHY setup routines. 902 **/ 903 static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active) 904 { 905 struct e1000_phy_info *phy = &hw->phy; 906 s32 ret_val; 907 u16 data; 908 909 ret_val = e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &data); 910 if (ret_val) 911 return ret_val; 912 913 if (active) { 914 data |= IGP02E1000_PM_D0_LPLU; 915 ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data); 916 if (ret_val) 917 return ret_val; 918 919 /* When LPLU is enabled, we should disable SmartSpeed */ 920 ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data); 921 if (ret_val) 922 return ret_val; 923 data &= ~IGP01E1000_PSCFR_SMART_SPEED; 924 ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data); 925 if (ret_val) 926 return ret_val; 927 } else { 928 data &= ~IGP02E1000_PM_D0_LPLU; 929 ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data); 930 /* LPLU and SmartSpeed are mutually exclusive. LPLU is used 931 * during Dx states where the power conservation is most 932 * important. During driver activity we should enable 933 * SmartSpeed, so performance is maintained. 934 */ 935 if (phy->smart_speed == e1000_smart_speed_on) { 936 ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, 937 &data); 938 if (ret_val) 939 return ret_val; 940 941 data |= IGP01E1000_PSCFR_SMART_SPEED; 942 ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, 943 data); 944 if (ret_val) 945 return ret_val; 946 } else if (phy->smart_speed == e1000_smart_speed_off) { 947 ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, 948 &data); 949 if (ret_val) 950 return ret_val; 951 952 data &= ~IGP01E1000_PSCFR_SMART_SPEED; 953 ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, 954 data); 955 if (ret_val) 956 return ret_val; 957 } 958 } 959 960 return 0; 961 } 962 963 /** 964 * e1000_reset_hw_82571 - Reset hardware 965 * @hw: pointer to the HW structure 966 * 967 * This resets the hardware into a known state. 968 **/ 969 static s32 e1000_reset_hw_82571(struct e1000_hw *hw) 970 { 971 u32 ctrl, ctrl_ext, eecd, tctl; 972 s32 ret_val; 973 974 /* Prevent the PCI-E bus from sticking if there is no TLP connection 975 * on the last TLP read/write transaction when MAC is reset. 976 */ 977 ret_val = e1000e_disable_pcie_master(hw); 978 if (ret_val) 979 e_dbg("PCI-E Master disable polling has failed.\n"); 980 981 e_dbg("Masking off all interrupts\n"); 982 ew32(IMC, 0xffffffff); 983 984 ew32(RCTL, 0); 985 tctl = er32(TCTL); 986 tctl &= ~E1000_TCTL_EN; 987 ew32(TCTL, tctl); 988 e1e_flush(); 989 990 usleep_range(10000, 20000); 991 992 /* Must acquire the MDIO ownership before MAC reset. 993 * Ownership defaults to firmware after a reset. 994 */ 995 switch (hw->mac.type) { 996 case e1000_82573: 997 ret_val = e1000_get_hw_semaphore_82573(hw); 998 break; 999 case e1000_82574: 1000 case e1000_82583: 1001 ret_val = e1000_get_hw_semaphore_82574(hw); 1002 break; 1003 default: 1004 break; 1005 } 1006 if (ret_val) 1007 e_dbg("Cannot acquire MDIO ownership\n"); 1008 1009 ctrl = er32(CTRL); 1010 1011 e_dbg("Issuing a global reset to MAC\n"); 1012 ew32(CTRL, ctrl | E1000_CTRL_RST); 1013 1014 /* Must release MDIO ownership and mutex after MAC reset. */ 1015 switch (hw->mac.type) { 1016 case e1000_82574: 1017 case e1000_82583: 1018 e1000_put_hw_semaphore_82574(hw); 1019 break; 1020 default: 1021 break; 1022 } 1023 1024 if (hw->nvm.type == e1000_nvm_flash_hw) { 1025 usleep_range(10, 20); 1026 ctrl_ext = er32(CTRL_EXT); 1027 ctrl_ext |= E1000_CTRL_EXT_EE_RST; 1028 ew32(CTRL_EXT, ctrl_ext); 1029 e1e_flush(); 1030 } 1031 1032 ret_val = e1000e_get_auto_rd_done(hw); 1033 if (ret_val) 1034 /* We don't want to continue accessing MAC registers. */ 1035 return ret_val; 1036 1037 /* Phy configuration from NVM just starts after EECD_AUTO_RD is set. 1038 * Need to wait for Phy configuration completion before accessing 1039 * NVM and Phy. 1040 */ 1041 1042 switch (hw->mac.type) { 1043 case e1000_82571: 1044 case e1000_82572: 1045 /* REQ and GNT bits need to be cleared when using AUTO_RD 1046 * to access the EEPROM. 1047 */ 1048 eecd = er32(EECD); 1049 eecd &= ~(E1000_EECD_REQ | E1000_EECD_GNT); 1050 ew32(EECD, eecd); 1051 break; 1052 case e1000_82573: 1053 case e1000_82574: 1054 case e1000_82583: 1055 msleep(25); 1056 break; 1057 default: 1058 break; 1059 } 1060 1061 /* Clear any pending interrupt events. */ 1062 ew32(IMC, 0xffffffff); 1063 er32(ICR); 1064 1065 if (hw->mac.type == e1000_82571) { 1066 /* Install any alternate MAC address into RAR0 */ 1067 ret_val = e1000_check_alt_mac_addr_generic(hw); 1068 if (ret_val) 1069 return ret_val; 1070 1071 e1000e_set_laa_state_82571(hw, true); 1072 } 1073 1074 /* Reinitialize the 82571 serdes link state machine */ 1075 if (hw->phy.media_type == e1000_media_type_internal_serdes) 1076 hw->mac.serdes_link_state = e1000_serdes_link_down; 1077 1078 return 0; 1079 } 1080 1081 /** 1082 * e1000_init_hw_82571 - Initialize hardware 1083 * @hw: pointer to the HW structure 1084 * 1085 * This inits the hardware readying it for operation. 1086 **/ 1087 static s32 e1000_init_hw_82571(struct e1000_hw *hw) 1088 { 1089 struct e1000_mac_info *mac = &hw->mac; 1090 u32 reg_data; 1091 s32 ret_val; 1092 u16 i, rar_count = mac->rar_entry_count; 1093 1094 e1000_initialize_hw_bits_82571(hw); 1095 1096 /* Initialize identification LED */ 1097 ret_val = mac->ops.id_led_init(hw); 1098 /* An error is not fatal and we should not stop init due to this */ 1099 if (ret_val) 1100 e_dbg("Error initializing identification LED\n"); 1101 1102 /* Disabling VLAN filtering */ 1103 e_dbg("Initializing the IEEE VLAN\n"); 1104 mac->ops.clear_vfta(hw); 1105 1106 /* Setup the receive address. 1107 * If, however, a locally administered address was assigned to the 1108 * 82571, we must reserve a RAR for it to work around an issue where 1109 * resetting one port will reload the MAC on the other port. 1110 */ 1111 if (e1000e_get_laa_state_82571(hw)) 1112 rar_count--; 1113 e1000e_init_rx_addrs(hw, rar_count); 1114 1115 /* Zero out the Multicast HASH table */ 1116 e_dbg("Zeroing the MTA\n"); 1117 for (i = 0; i < mac->mta_reg_count; i++) 1118 E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0); 1119 1120 /* Setup link and flow control */ 1121 ret_val = mac->ops.setup_link(hw); 1122 1123 /* Set the transmit descriptor write-back policy */ 1124 reg_data = er32(TXDCTL(0)); 1125 reg_data = ((reg_data & ~E1000_TXDCTL_WTHRESH) | 1126 E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC); 1127 ew32(TXDCTL(0), reg_data); 1128 1129 /* ...for both queues. */ 1130 switch (mac->type) { 1131 case e1000_82573: 1132 e1000e_enable_tx_pkt_filtering(hw); 1133 /* fall through */ 1134 case e1000_82574: 1135 case e1000_82583: 1136 reg_data = er32(GCR); 1137 reg_data |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX; 1138 ew32(GCR, reg_data); 1139 break; 1140 default: 1141 reg_data = er32(TXDCTL(1)); 1142 reg_data = ((reg_data & ~E1000_TXDCTL_WTHRESH) | 1143 E1000_TXDCTL_FULL_TX_DESC_WB | 1144 E1000_TXDCTL_COUNT_DESC); 1145 ew32(TXDCTL(1), reg_data); 1146 break; 1147 } 1148 1149 /* Clear all of the statistics registers (clear on read). It is 1150 * important that we do this after we have tried to establish link 1151 * because the symbol error count will increment wildly if there 1152 * is no link. 1153 */ 1154 e1000_clear_hw_cntrs_82571(hw); 1155 1156 return ret_val; 1157 } 1158 1159 /** 1160 * e1000_initialize_hw_bits_82571 - Initialize hardware-dependent bits 1161 * @hw: pointer to the HW structure 1162 * 1163 * Initializes required hardware-dependent bits needed for normal operation. 1164 **/ 1165 static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) 1166 { 1167 u32 reg; 1168 1169 /* Transmit Descriptor Control 0 */ 1170 reg = er32(TXDCTL(0)); 1171 reg |= (1 << 22); 1172 ew32(TXDCTL(0), reg); 1173 1174 /* Transmit Descriptor Control 1 */ 1175 reg = er32(TXDCTL(1)); 1176 reg |= (1 << 22); 1177 ew32(TXDCTL(1), reg); 1178 1179 /* Transmit Arbitration Control 0 */ 1180 reg = er32(TARC(0)); 1181 reg &= ~(0xF << 27); /* 30:27 */ 1182 switch (hw->mac.type) { 1183 case e1000_82571: 1184 case e1000_82572: 1185 reg |= (1 << 23) | (1 << 24) | (1 << 25) | (1 << 26); 1186 break; 1187 case e1000_82574: 1188 case e1000_82583: 1189 reg |= (1 << 26); 1190 break; 1191 default: 1192 break; 1193 } 1194 ew32(TARC(0), reg); 1195 1196 /* Transmit Arbitration Control 1 */ 1197 reg = er32(TARC(1)); 1198 switch (hw->mac.type) { 1199 case e1000_82571: 1200 case e1000_82572: 1201 reg &= ~((1 << 29) | (1 << 30)); 1202 reg |= (1 << 22) | (1 << 24) | (1 << 25) | (1 << 26); 1203 if (er32(TCTL) & E1000_TCTL_MULR) 1204 reg &= ~(1 << 28); 1205 else 1206 reg |= (1 << 28); 1207 ew32(TARC(1), reg); 1208 break; 1209 default: 1210 break; 1211 } 1212 1213 /* Device Control */ 1214 switch (hw->mac.type) { 1215 case e1000_82573: 1216 case e1000_82574: 1217 case e1000_82583: 1218 reg = er32(CTRL); 1219 reg &= ~(1 << 29); 1220 ew32(CTRL, reg); 1221 break; 1222 default: 1223 break; 1224 } 1225 1226 /* Extended Device Control */ 1227 switch (hw->mac.type) { 1228 case e1000_82573: 1229 case e1000_82574: 1230 case e1000_82583: 1231 reg = er32(CTRL_EXT); 1232 reg &= ~(1 << 23); 1233 reg |= (1 << 22); 1234 ew32(CTRL_EXT, reg); 1235 break; 1236 default: 1237 break; 1238 } 1239 1240 if (hw->mac.type == e1000_82571) { 1241 reg = er32(PBA_ECC); 1242 reg |= E1000_PBA_ECC_CORR_EN; 1243 ew32(PBA_ECC, reg); 1244 } 1245 1246 /* Workaround for hardware errata. 1247 * Ensure that DMA Dynamic Clock gating is disabled on 82571 and 82572 1248 */ 1249 if ((hw->mac.type == e1000_82571) || (hw->mac.type == e1000_82572)) { 1250 reg = er32(CTRL_EXT); 1251 reg &= ~E1000_CTRL_EXT_DMA_DYN_CLK_EN; 1252 ew32(CTRL_EXT, reg); 1253 } 1254 1255 /* Disable IPv6 extension header parsing because some malformed 1256 * IPv6 headers can hang the Rx. 1257 */ 1258 if (hw->mac.type <= e1000_82573) { 1259 reg = er32(RFCTL); 1260 reg |= (E1000_RFCTL_IPV6_EX_DIS | E1000_RFCTL_NEW_IPV6_EXT_DIS); 1261 ew32(RFCTL, reg); 1262 } 1263 1264 /* PCI-Ex Control Registers */ 1265 switch (hw->mac.type) { 1266 case e1000_82574: 1267 case e1000_82583: 1268 reg = er32(GCR); 1269 reg |= (1 << 22); 1270 ew32(GCR, reg); 1271 1272 /* Workaround for hardware errata. 1273 * apply workaround for hardware errata documented in errata 1274 * docs Fixes issue where some error prone or unreliable PCIe 1275 * completions are occurring, particularly with ASPM enabled. 1276 * Without fix, issue can cause Tx timeouts. 1277 */ 1278 reg = er32(GCR2); 1279 reg |= 1; 1280 ew32(GCR2, reg); 1281 break; 1282 default: 1283 break; 1284 } 1285 } 1286 1287 /** 1288 * e1000_clear_vfta_82571 - Clear VLAN filter table 1289 * @hw: pointer to the HW structure 1290 * 1291 * Clears the register array which contains the VLAN filter table by 1292 * setting all the values to 0. 1293 **/ 1294 static void e1000_clear_vfta_82571(struct e1000_hw *hw) 1295 { 1296 u32 offset; 1297 u32 vfta_value = 0; 1298 u32 vfta_offset = 0; 1299 u32 vfta_bit_in_reg = 0; 1300 1301 switch (hw->mac.type) { 1302 case e1000_82573: 1303 case e1000_82574: 1304 case e1000_82583: 1305 if (hw->mng_cookie.vlan_id != 0) { 1306 /* The VFTA is a 4096b bit-field, each identifying 1307 * a single VLAN ID. The following operations 1308 * determine which 32b entry (i.e. offset) into the 1309 * array we want to set the VLAN ID (i.e. bit) of 1310 * the manageability unit. 1311 */ 1312 vfta_offset = (hw->mng_cookie.vlan_id >> 1313 E1000_VFTA_ENTRY_SHIFT) & 1314 E1000_VFTA_ENTRY_MASK; 1315 vfta_bit_in_reg = 1316 1 << (hw->mng_cookie.vlan_id & 1317 E1000_VFTA_ENTRY_BIT_SHIFT_MASK); 1318 } 1319 break; 1320 default: 1321 break; 1322 } 1323 for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { 1324 /* If the offset we want to clear is the same offset of the 1325 * manageability VLAN ID, then clear all bits except that of 1326 * the manageability unit. 1327 */ 1328 vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0; 1329 E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, vfta_value); 1330 e1e_flush(); 1331 } 1332 } 1333 1334 /** 1335 * e1000_check_mng_mode_82574 - Check manageability is enabled 1336 * @hw: pointer to the HW structure 1337 * 1338 * Reads the NVM Initialization Control Word 2 and returns true 1339 * (>0) if any manageability is enabled, else false (0). 1340 **/ 1341 static bool e1000_check_mng_mode_82574(struct e1000_hw *hw) 1342 { 1343 u16 data; 1344 1345 e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data); 1346 return (data & E1000_NVM_INIT_CTRL2_MNGM) != 0; 1347 } 1348 1349 /** 1350 * e1000_led_on_82574 - Turn LED on 1351 * @hw: pointer to the HW structure 1352 * 1353 * Turn LED on. 1354 **/ 1355 static s32 e1000_led_on_82574(struct e1000_hw *hw) 1356 { 1357 u32 ctrl; 1358 u32 i; 1359 1360 ctrl = hw->mac.ledctl_mode2; 1361 if (!(E1000_STATUS_LU & er32(STATUS))) { 1362 /* If no link, then turn LED on by setting the invert bit 1363 * for each LED that's "on" (0x0E) in ledctl_mode2. 1364 */ 1365 for (i = 0; i < 4; i++) 1366 if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) == 1367 E1000_LEDCTL_MODE_LED_ON) 1368 ctrl |= (E1000_LEDCTL_LED0_IVRT << (i * 8)); 1369 } 1370 ew32(LEDCTL, ctrl); 1371 1372 return 0; 1373 } 1374 1375 /** 1376 * e1000_check_phy_82574 - check 82574 phy hung state 1377 * @hw: pointer to the HW structure 1378 * 1379 * Returns whether phy is hung or not 1380 **/ 1381 bool e1000_check_phy_82574(struct e1000_hw *hw) 1382 { 1383 u16 status_1kbt = 0; 1384 u16 receive_errors = 0; 1385 s32 ret_val; 1386 1387 /* Read PHY Receive Error counter first, if its is max - all F's then 1388 * read the Base1000T status register If both are max then PHY is hung. 1389 */ 1390 ret_val = e1e_rphy(hw, E1000_RECEIVE_ERROR_COUNTER, &receive_errors); 1391 if (ret_val) 1392 return false; 1393 if (receive_errors == E1000_RECEIVE_ERROR_MAX) { 1394 ret_val = e1e_rphy(hw, E1000_BASE1000T_STATUS, &status_1kbt); 1395 if (ret_val) 1396 return false; 1397 if ((status_1kbt & E1000_IDLE_ERROR_COUNT_MASK) == 1398 E1000_IDLE_ERROR_COUNT_MASK) 1399 return true; 1400 } 1401 1402 return false; 1403 } 1404 1405 /** 1406 * e1000_setup_link_82571 - Setup flow control and link settings 1407 * @hw: pointer to the HW structure 1408 * 1409 * Determines which flow control settings to use, then configures flow 1410 * control. Calls the appropriate media-specific link configuration 1411 * function. Assuming the adapter has a valid link partner, a valid link 1412 * should be established. Assumes the hardware has previously been reset 1413 * and the transmitter and receiver are not enabled. 1414 **/ 1415 static s32 e1000_setup_link_82571(struct e1000_hw *hw) 1416 { 1417 /* 82573 does not have a word in the NVM to determine 1418 * the default flow control setting, so we explicitly 1419 * set it to full. 1420 */ 1421 switch (hw->mac.type) { 1422 case e1000_82573: 1423 case e1000_82574: 1424 case e1000_82583: 1425 if (hw->fc.requested_mode == e1000_fc_default) 1426 hw->fc.requested_mode = e1000_fc_full; 1427 break; 1428 default: 1429 break; 1430 } 1431 1432 return e1000e_setup_link_generic(hw); 1433 } 1434 1435 /** 1436 * e1000_setup_copper_link_82571 - Configure copper link settings 1437 * @hw: pointer to the HW structure 1438 * 1439 * Configures the link for auto-neg or forced speed and duplex. Then we check 1440 * for link, once link is established calls to configure collision distance 1441 * and flow control are called. 1442 **/ 1443 static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw) 1444 { 1445 u32 ctrl; 1446 s32 ret_val; 1447 1448 ctrl = er32(CTRL); 1449 ctrl |= E1000_CTRL_SLU; 1450 ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); 1451 ew32(CTRL, ctrl); 1452 1453 switch (hw->phy.type) { 1454 case e1000_phy_m88: 1455 case e1000_phy_bm: 1456 ret_val = e1000e_copper_link_setup_m88(hw); 1457 break; 1458 case e1000_phy_igp_2: 1459 ret_val = e1000e_copper_link_setup_igp(hw); 1460 break; 1461 default: 1462 return -E1000_ERR_PHY; 1463 break; 1464 } 1465 1466 if (ret_val) 1467 return ret_val; 1468 1469 return e1000e_setup_copper_link(hw); 1470 } 1471 1472 /** 1473 * e1000_setup_fiber_serdes_link_82571 - Setup link for fiber/serdes 1474 * @hw: pointer to the HW structure 1475 * 1476 * Configures collision distance and flow control for fiber and serdes links. 1477 * Upon successful setup, poll for link. 1478 **/ 1479 static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw) 1480 { 1481 switch (hw->mac.type) { 1482 case e1000_82571: 1483 case e1000_82572: 1484 /* If SerDes loopback mode is entered, there is no form 1485 * of reset to take the adapter out of that mode. So we 1486 * have to explicitly take the adapter out of loopback 1487 * mode. This prevents drivers from twiddling their thumbs 1488 * if another tool failed to take it out of loopback mode. 1489 */ 1490 ew32(SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK); 1491 break; 1492 default: 1493 break; 1494 } 1495 1496 return e1000e_setup_fiber_serdes_link(hw); 1497 } 1498 1499 /** 1500 * e1000_check_for_serdes_link_82571 - Check for link (Serdes) 1501 * @hw: pointer to the HW structure 1502 * 1503 * Reports the link state as up or down. 1504 * 1505 * If autonegotiation is supported by the link partner, the link state is 1506 * determined by the result of autonegotiation. This is the most likely case. 1507 * If autonegotiation is not supported by the link partner, and the link 1508 * has a valid signal, force the link up. 1509 * 1510 * The link state is represented internally here by 4 states: 1511 * 1512 * 1) down 1513 * 2) autoneg_progress 1514 * 3) autoneg_complete (the link successfully autonegotiated) 1515 * 4) forced_up (the link has been forced up, it did not autonegotiate) 1516 * 1517 **/ 1518 static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) 1519 { 1520 struct e1000_mac_info *mac = &hw->mac; 1521 u32 rxcw; 1522 u32 ctrl; 1523 u32 status; 1524 u32 txcw; 1525 u32 i; 1526 s32 ret_val = 0; 1527 1528 ctrl = er32(CTRL); 1529 status = er32(STATUS); 1530 er32(RXCW); 1531 /* SYNCH bit and IV bit are sticky */ 1532 usleep_range(10, 20); 1533 rxcw = er32(RXCW); 1534 1535 if ((rxcw & E1000_RXCW_SYNCH) && !(rxcw & E1000_RXCW_IV)) { 1536 /* Receiver is synchronized with no invalid bits. */ 1537 switch (mac->serdes_link_state) { 1538 case e1000_serdes_link_autoneg_complete: 1539 if (!(status & E1000_STATUS_LU)) { 1540 /* We have lost link, retry autoneg before 1541 * reporting link failure 1542 */ 1543 mac->serdes_link_state = 1544 e1000_serdes_link_autoneg_progress; 1545 mac->serdes_has_link = false; 1546 e_dbg("AN_UP -> AN_PROG\n"); 1547 } else { 1548 mac->serdes_has_link = true; 1549 } 1550 break; 1551 1552 case e1000_serdes_link_forced_up: 1553 /* If we are receiving /C/ ordered sets, re-enable 1554 * auto-negotiation in the TXCW register and disable 1555 * forced link in the Device Control register in an 1556 * attempt to auto-negotiate with our link partner. 1557 */ 1558 if (rxcw & E1000_RXCW_C) { 1559 /* Enable autoneg, and unforce link up */ 1560 ew32(TXCW, mac->txcw); 1561 ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); 1562 mac->serdes_link_state = 1563 e1000_serdes_link_autoneg_progress; 1564 mac->serdes_has_link = false; 1565 e_dbg("FORCED_UP -> AN_PROG\n"); 1566 } else { 1567 mac->serdes_has_link = true; 1568 } 1569 break; 1570 1571 case e1000_serdes_link_autoneg_progress: 1572 if (rxcw & E1000_RXCW_C) { 1573 /* We received /C/ ordered sets, meaning the 1574 * link partner has autonegotiated, and we can 1575 * trust the Link Up (LU) status bit. 1576 */ 1577 if (status & E1000_STATUS_LU) { 1578 mac->serdes_link_state = 1579 e1000_serdes_link_autoneg_complete; 1580 e_dbg("AN_PROG -> AN_UP\n"); 1581 mac->serdes_has_link = true; 1582 } else { 1583 /* Autoneg completed, but failed. */ 1584 mac->serdes_link_state = 1585 e1000_serdes_link_down; 1586 e_dbg("AN_PROG -> DOWN\n"); 1587 } 1588 } else { 1589 /* The link partner did not autoneg. 1590 * Force link up and full duplex, and change 1591 * state to forced. 1592 */ 1593 ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE)); 1594 ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); 1595 ew32(CTRL, ctrl); 1596 1597 /* Configure Flow Control after link up. */ 1598 ret_val = e1000e_config_fc_after_link_up(hw); 1599 if (ret_val) { 1600 e_dbg("Error config flow control\n"); 1601 break; 1602 } 1603 mac->serdes_link_state = 1604 e1000_serdes_link_forced_up; 1605 mac->serdes_has_link = true; 1606 e_dbg("AN_PROG -> FORCED_UP\n"); 1607 } 1608 break; 1609 1610 case e1000_serdes_link_down: 1611 default: 1612 /* The link was down but the receiver has now gained 1613 * valid sync, so lets see if we can bring the link 1614 * up. 1615 */ 1616 ew32(TXCW, mac->txcw); 1617 ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); 1618 mac->serdes_link_state = 1619 e1000_serdes_link_autoneg_progress; 1620 mac->serdes_has_link = false; 1621 e_dbg("DOWN -> AN_PROG\n"); 1622 break; 1623 } 1624 } else { 1625 if (!(rxcw & E1000_RXCW_SYNCH)) { 1626 mac->serdes_has_link = false; 1627 mac->serdes_link_state = e1000_serdes_link_down; 1628 e_dbg("ANYSTATE -> DOWN\n"); 1629 } else { 1630 /* Check several times, if SYNCH bit and CONFIG 1631 * bit both are consistently 1 then simply ignore 1632 * the IV bit and restart Autoneg 1633 */ 1634 for (i = 0; i < AN_RETRY_COUNT; i++) { 1635 usleep_range(10, 20); 1636 rxcw = er32(RXCW); 1637 if ((rxcw & E1000_RXCW_SYNCH) && 1638 (rxcw & E1000_RXCW_C)) 1639 continue; 1640 1641 if (rxcw & E1000_RXCW_IV) { 1642 mac->serdes_has_link = false; 1643 mac->serdes_link_state = 1644 e1000_serdes_link_down; 1645 e_dbg("ANYSTATE -> DOWN\n"); 1646 break; 1647 } 1648 } 1649 1650 if (i == AN_RETRY_COUNT) { 1651 txcw = er32(TXCW); 1652 txcw |= E1000_TXCW_ANE; 1653 ew32(TXCW, txcw); 1654 mac->serdes_link_state = 1655 e1000_serdes_link_autoneg_progress; 1656 mac->serdes_has_link = false; 1657 e_dbg("ANYSTATE -> AN_PROG\n"); 1658 } 1659 } 1660 } 1661 1662 return ret_val; 1663 } 1664 1665 /** 1666 * e1000_valid_led_default_82571 - Verify a valid default LED config 1667 * @hw: pointer to the HW structure 1668 * @data: pointer to the NVM (EEPROM) 1669 * 1670 * Read the EEPROM for the current default LED configuration. If the 1671 * LED configuration is not valid, set to a valid LED configuration. 1672 **/ 1673 static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data) 1674 { 1675 s32 ret_val; 1676 1677 ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data); 1678 if (ret_val) { 1679 e_dbg("NVM Read Error\n"); 1680 return ret_val; 1681 } 1682 1683 switch (hw->mac.type) { 1684 case e1000_82573: 1685 case e1000_82574: 1686 case e1000_82583: 1687 if (*data == ID_LED_RESERVED_F746) 1688 *data = ID_LED_DEFAULT_82573; 1689 break; 1690 default: 1691 if (*data == ID_LED_RESERVED_0000 || 1692 *data == ID_LED_RESERVED_FFFF) 1693 *data = ID_LED_DEFAULT; 1694 break; 1695 } 1696 1697 return 0; 1698 } 1699 1700 /** 1701 * e1000e_get_laa_state_82571 - Get locally administered address state 1702 * @hw: pointer to the HW structure 1703 * 1704 * Retrieve and return the current locally administered address state. 1705 **/ 1706 bool e1000e_get_laa_state_82571(struct e1000_hw *hw) 1707 { 1708 if (hw->mac.type != e1000_82571) 1709 return false; 1710 1711 return hw->dev_spec.e82571.laa_is_present; 1712 } 1713 1714 /** 1715 * e1000e_set_laa_state_82571 - Set locally administered address state 1716 * @hw: pointer to the HW structure 1717 * @state: enable/disable locally administered address 1718 * 1719 * Enable/Disable the current locally administered address state. 1720 **/ 1721 void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state) 1722 { 1723 if (hw->mac.type != e1000_82571) 1724 return; 1725 1726 hw->dev_spec.e82571.laa_is_present = state; 1727 1728 /* If workaround is activated... */ 1729 if (state) 1730 /* Hold a copy of the LAA in RAR[14] This is done so that 1731 * between the time RAR[0] gets clobbered and the time it 1732 * gets fixed, the actual LAA is in one of the RARs and no 1733 * incoming packets directed to this port are dropped. 1734 * Eventually the LAA will be in RAR[0] and RAR[14]. 1735 */ 1736 hw->mac.ops.rar_set(hw, hw->mac.addr, 1737 hw->mac.rar_entry_count - 1); 1738 } 1739 1740 /** 1741 * e1000_fix_nvm_checksum_82571 - Fix EEPROM checksum 1742 * @hw: pointer to the HW structure 1743 * 1744 * Verifies that the EEPROM has completed the update. After updating the 1745 * EEPROM, we need to check bit 15 in work 0x23 for the checksum fix. If 1746 * the checksum fix is not implemented, we need to set the bit and update 1747 * the checksum. Otherwise, if bit 15 is set and the checksum is incorrect, 1748 * we need to return bad checksum. 1749 **/ 1750 static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw) 1751 { 1752 struct e1000_nvm_info *nvm = &hw->nvm; 1753 s32 ret_val; 1754 u16 data; 1755 1756 if (nvm->type != e1000_nvm_flash_hw) 1757 return 0; 1758 1759 /* Check bit 4 of word 10h. If it is 0, firmware is done updating 1760 * 10h-12h. Checksum may need to be fixed. 1761 */ 1762 ret_val = e1000_read_nvm(hw, 0x10, 1, &data); 1763 if (ret_val) 1764 return ret_val; 1765 1766 if (!(data & 0x10)) { 1767 /* Read 0x23 and check bit 15. This bit is a 1 1768 * when the checksum has already been fixed. If 1769 * the checksum is still wrong and this bit is a 1770 * 1, we need to return bad checksum. Otherwise, 1771 * we need to set this bit to a 1 and update the 1772 * checksum. 1773 */ 1774 ret_val = e1000_read_nvm(hw, 0x23, 1, &data); 1775 if (ret_val) 1776 return ret_val; 1777 1778 if (!(data & 0x8000)) { 1779 data |= 0x8000; 1780 ret_val = e1000_write_nvm(hw, 0x23, 1, &data); 1781 if (ret_val) 1782 return ret_val; 1783 ret_val = e1000e_update_nvm_checksum(hw); 1784 if (ret_val) 1785 return ret_val; 1786 } 1787 } 1788 1789 return 0; 1790 } 1791 1792 /** 1793 * e1000_read_mac_addr_82571 - Read device MAC address 1794 * @hw: pointer to the HW structure 1795 **/ 1796 static s32 e1000_read_mac_addr_82571(struct e1000_hw *hw) 1797 { 1798 if (hw->mac.type == e1000_82571) { 1799 s32 ret_val; 1800 1801 /* If there's an alternate MAC address place it in RAR0 1802 * so that it will override the Si installed default perm 1803 * address. 1804 */ 1805 ret_val = e1000_check_alt_mac_addr_generic(hw); 1806 if (ret_val) 1807 return ret_val; 1808 } 1809 1810 return e1000_read_mac_addr_generic(hw); 1811 } 1812 1813 /** 1814 * e1000_power_down_phy_copper_82571 - Remove link during PHY power down 1815 * @hw: pointer to the HW structure 1816 * 1817 * In the case of a PHY power down to save power, or to turn off link during a 1818 * driver unload, or wake on lan is not enabled, remove the link. 1819 **/ 1820 static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw) 1821 { 1822 struct e1000_phy_info *phy = &hw->phy; 1823 struct e1000_mac_info *mac = &hw->mac; 1824 1825 if (!phy->ops.check_reset_block) 1826 return; 1827 1828 /* If the management interface is not enabled, then power down */ 1829 if (!(mac->ops.check_mng_mode(hw) || phy->ops.check_reset_block(hw))) 1830 e1000_power_down_phy_copper(hw); 1831 } 1832 1833 /** 1834 * e1000_clear_hw_cntrs_82571 - Clear device specific hardware counters 1835 * @hw: pointer to the HW structure 1836 * 1837 * Clears the hardware counters by reading the counter registers. 1838 **/ 1839 static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw) 1840 { 1841 e1000e_clear_hw_cntrs_base(hw); 1842 1843 er32(PRC64); 1844 er32(PRC127); 1845 er32(PRC255); 1846 er32(PRC511); 1847 er32(PRC1023); 1848 er32(PRC1522); 1849 er32(PTC64); 1850 er32(PTC127); 1851 er32(PTC255); 1852 er32(PTC511); 1853 er32(PTC1023); 1854 er32(PTC1522); 1855 1856 er32(ALGNERRC); 1857 er32(RXERRC); 1858 er32(TNCRS); 1859 er32(CEXTERR); 1860 er32(TSCTC); 1861 er32(TSCTFC); 1862 1863 er32(MGTPRC); 1864 er32(MGTPDC); 1865 er32(MGTPTC); 1866 1867 er32(IAC); 1868 er32(ICRXOC); 1869 1870 er32(ICRXPTC); 1871 er32(ICRXATC); 1872 er32(ICTXPTC); 1873 er32(ICTXATC); 1874 er32(ICTXQEC); 1875 er32(ICTXQMTC); 1876 er32(ICRXDMTC); 1877 } 1878 1879 static const struct e1000_mac_operations e82571_mac_ops = { 1880 /* .check_mng_mode: mac type dependent */ 1881 /* .check_for_link: media type dependent */ 1882 .id_led_init = e1000e_id_led_init_generic, 1883 .cleanup_led = e1000e_cleanup_led_generic, 1884 .clear_hw_cntrs = e1000_clear_hw_cntrs_82571, 1885 .get_bus_info = e1000e_get_bus_info_pcie, 1886 .set_lan_id = e1000_set_lan_id_multi_port_pcie, 1887 /* .get_link_up_info: media type dependent */ 1888 /* .led_on: mac type dependent */ 1889 .led_off = e1000e_led_off_generic, 1890 .update_mc_addr_list = e1000e_update_mc_addr_list_generic, 1891 .write_vfta = e1000_write_vfta_generic, 1892 .clear_vfta = e1000_clear_vfta_82571, 1893 .reset_hw = e1000_reset_hw_82571, 1894 .init_hw = e1000_init_hw_82571, 1895 .setup_link = e1000_setup_link_82571, 1896 /* .setup_physical_interface: media type dependent */ 1897 .setup_led = e1000e_setup_led_generic, 1898 .config_collision_dist = e1000e_config_collision_dist_generic, 1899 .read_mac_addr = e1000_read_mac_addr_82571, 1900 .rar_set = e1000e_rar_set_generic, 1901 }; 1902 1903 static const struct e1000_phy_operations e82_phy_ops_igp = { 1904 .acquire = e1000_get_hw_semaphore_82571, 1905 .check_polarity = e1000_check_polarity_igp, 1906 .check_reset_block = e1000e_check_reset_block_generic, 1907 .commit = NULL, 1908 .force_speed_duplex = e1000e_phy_force_speed_duplex_igp, 1909 .get_cfg_done = e1000_get_cfg_done_82571, 1910 .get_cable_length = e1000e_get_cable_length_igp_2, 1911 .get_info = e1000e_get_phy_info_igp, 1912 .read_reg = e1000e_read_phy_reg_igp, 1913 .release = e1000_put_hw_semaphore_82571, 1914 .reset = e1000e_phy_hw_reset_generic, 1915 .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, 1916 .set_d3_lplu_state = e1000e_set_d3_lplu_state, 1917 .write_reg = e1000e_write_phy_reg_igp, 1918 .cfg_on_link_up = NULL, 1919 }; 1920 1921 static const struct e1000_phy_operations e82_phy_ops_m88 = { 1922 .acquire = e1000_get_hw_semaphore_82571, 1923 .check_polarity = e1000_check_polarity_m88, 1924 .check_reset_block = e1000e_check_reset_block_generic, 1925 .commit = e1000e_phy_sw_reset, 1926 .force_speed_duplex = e1000e_phy_force_speed_duplex_m88, 1927 .get_cfg_done = e1000e_get_cfg_done_generic, 1928 .get_cable_length = e1000e_get_cable_length_m88, 1929 .get_info = e1000e_get_phy_info_m88, 1930 .read_reg = e1000e_read_phy_reg_m88, 1931 .release = e1000_put_hw_semaphore_82571, 1932 .reset = e1000e_phy_hw_reset_generic, 1933 .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, 1934 .set_d3_lplu_state = e1000e_set_d3_lplu_state, 1935 .write_reg = e1000e_write_phy_reg_m88, 1936 .cfg_on_link_up = NULL, 1937 }; 1938 1939 static const struct e1000_phy_operations e82_phy_ops_bm = { 1940 .acquire = e1000_get_hw_semaphore_82571, 1941 .check_polarity = e1000_check_polarity_m88, 1942 .check_reset_block = e1000e_check_reset_block_generic, 1943 .commit = e1000e_phy_sw_reset, 1944 .force_speed_duplex = e1000e_phy_force_speed_duplex_m88, 1945 .get_cfg_done = e1000e_get_cfg_done_generic, 1946 .get_cable_length = e1000e_get_cable_length_m88, 1947 .get_info = e1000e_get_phy_info_m88, 1948 .read_reg = e1000e_read_phy_reg_bm2, 1949 .release = e1000_put_hw_semaphore_82571, 1950 .reset = e1000e_phy_hw_reset_generic, 1951 .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, 1952 .set_d3_lplu_state = e1000e_set_d3_lplu_state, 1953 .write_reg = e1000e_write_phy_reg_bm2, 1954 .cfg_on_link_up = NULL, 1955 }; 1956 1957 static const struct e1000_nvm_operations e82571_nvm_ops = { 1958 .acquire = e1000_acquire_nvm_82571, 1959 .read = e1000e_read_nvm_eerd, 1960 .release = e1000_release_nvm_82571, 1961 .reload = e1000e_reload_nvm_generic, 1962 .update = e1000_update_nvm_checksum_82571, 1963 .valid_led_default = e1000_valid_led_default_82571, 1964 .validate = e1000_validate_nvm_checksum_82571, 1965 .write = e1000_write_nvm_82571, 1966 }; 1967 1968 const struct e1000_info e1000_82571_info = { 1969 .mac = e1000_82571, 1970 .flags = FLAG_HAS_HW_VLAN_FILTER 1971 | FLAG_HAS_JUMBO_FRAMES 1972 | FLAG_HAS_WOL 1973 | FLAG_APME_IN_CTRL3 1974 | FLAG_HAS_CTRLEXT_ON_LOAD 1975 | FLAG_HAS_SMART_POWER_DOWN 1976 | FLAG_RESET_OVERWRITES_LAA /* errata */ 1977 | FLAG_TARC_SPEED_MODE_BIT /* errata */ 1978 | FLAG_APME_CHECK_PORT_B, 1979 .flags2 = FLAG2_DISABLE_ASPM_L1 /* errata 13 */ 1980 | FLAG2_DMA_BURST, 1981 .pba = 38, 1982 .max_hw_frame_size = DEFAULT_JUMBO, 1983 .get_variants = e1000_get_variants_82571, 1984 .mac_ops = &e82571_mac_ops, 1985 .phy_ops = &e82_phy_ops_igp, 1986 .nvm_ops = &e82571_nvm_ops, 1987 }; 1988 1989 const struct e1000_info e1000_82572_info = { 1990 .mac = e1000_82572, 1991 .flags = FLAG_HAS_HW_VLAN_FILTER 1992 | FLAG_HAS_JUMBO_FRAMES 1993 | FLAG_HAS_WOL 1994 | FLAG_APME_IN_CTRL3 1995 | FLAG_HAS_CTRLEXT_ON_LOAD 1996 | FLAG_TARC_SPEED_MODE_BIT, /* errata */ 1997 .flags2 = FLAG2_DISABLE_ASPM_L1 /* errata 13 */ 1998 | FLAG2_DMA_BURST, 1999 .pba = 38, 2000 .max_hw_frame_size = DEFAULT_JUMBO, 2001 .get_variants = e1000_get_variants_82571, 2002 .mac_ops = &e82571_mac_ops, 2003 .phy_ops = &e82_phy_ops_igp, 2004 .nvm_ops = &e82571_nvm_ops, 2005 }; 2006 2007 const struct e1000_info e1000_82573_info = { 2008 .mac = e1000_82573, 2009 .flags = FLAG_HAS_HW_VLAN_FILTER 2010 | FLAG_HAS_WOL 2011 | FLAG_APME_IN_CTRL3 2012 | FLAG_HAS_SMART_POWER_DOWN 2013 | FLAG_HAS_AMT 2014 | FLAG_HAS_SWSM_ON_LOAD, 2015 .flags2 = FLAG2_DISABLE_ASPM_L1 2016 | FLAG2_DISABLE_ASPM_L0S, 2017 .pba = 20, 2018 .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN, 2019 .get_variants = e1000_get_variants_82571, 2020 .mac_ops = &e82571_mac_ops, 2021 .phy_ops = &e82_phy_ops_m88, 2022 .nvm_ops = &e82571_nvm_ops, 2023 }; 2024 2025 const struct e1000_info e1000_82574_info = { 2026 .mac = e1000_82574, 2027 .flags = FLAG_HAS_HW_VLAN_FILTER 2028 | FLAG_HAS_MSIX 2029 | FLAG_HAS_JUMBO_FRAMES 2030 | FLAG_HAS_WOL 2031 | FLAG_HAS_HW_TIMESTAMP 2032 | FLAG_APME_IN_CTRL3 2033 | FLAG_HAS_SMART_POWER_DOWN 2034 | FLAG_HAS_AMT 2035 | FLAG_HAS_CTRLEXT_ON_LOAD, 2036 .flags2 = FLAG2_CHECK_PHY_HANG 2037 | FLAG2_DISABLE_ASPM_L0S 2038 | FLAG2_DISABLE_ASPM_L1 2039 | FLAG2_NO_DISABLE_RX 2040 | FLAG2_DMA_BURST, 2041 .pba = 32, 2042 .max_hw_frame_size = DEFAULT_JUMBO, 2043 .get_variants = e1000_get_variants_82571, 2044 .mac_ops = &e82571_mac_ops, 2045 .phy_ops = &e82_phy_ops_bm, 2046 .nvm_ops = &e82571_nvm_ops, 2047 }; 2048 2049 const struct e1000_info e1000_82583_info = { 2050 .mac = e1000_82583, 2051 .flags = FLAG_HAS_HW_VLAN_FILTER 2052 | FLAG_HAS_WOL 2053 | FLAG_HAS_HW_TIMESTAMP 2054 | FLAG_APME_IN_CTRL3 2055 | FLAG_HAS_SMART_POWER_DOWN 2056 | FLAG_HAS_AMT 2057 | FLAG_HAS_JUMBO_FRAMES 2058 | FLAG_HAS_CTRLEXT_ON_LOAD, 2059 .flags2 = FLAG2_DISABLE_ASPM_L0S 2060 | FLAG2_NO_DISABLE_RX, 2061 .pba = 32, 2062 .max_hw_frame_size = DEFAULT_JUMBO, 2063 .get_variants = e1000_get_variants_82571, 2064 .mac_ops = &e82571_mac_ops, 2065 .phy_ops = &e82_phy_ops_bm, 2066 .nvm_ops = &e82571_nvm_ops, 2067 }; 2068