xref: /openbmc/linux/drivers/net/ethernet/intel/e1000/e1000.h (revision 6c870213d6f3a25981c10728f46294a3bed1703f)
1 /*******************************************************************************
2 
3   Intel PRO/1000 Linux driver
4   Copyright(c) 1999 - 2006 Intel Corporation.
5 
6   This program is free software; you can redistribute it and/or modify it
7   under the terms and conditions of the GNU General Public License,
8   version 2, as published by the Free Software Foundation.
9 
10   This program is distributed in the hope it will be useful, but WITHOUT
11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13   more details.
14 
15   You should have received a copy of the GNU General Public License along with
16   this program; if not, write to the Free Software Foundation, Inc.,
17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18 
19   The full GNU General Public License is included in this distribution in
20   the file called "COPYING".
21 
22   Contact Information:
23   Linux NICS <linux.nics@intel.com>
24   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
25   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
26 
27 *******************************************************************************/
28 
29 
30 /* Linux PRO/1000 Ethernet Driver main header file */
31 
32 #ifndef _E1000_H_
33 #define _E1000_H_
34 
35 #include <linux/stddef.h>
36 #include <linux/module.h>
37 #include <linux/types.h>
38 #include <asm/byteorder.h>
39 #include <linux/mm.h>
40 #include <linux/errno.h>
41 #include <linux/ioport.h>
42 #include <linux/pci.h>
43 #include <linux/kernel.h>
44 #include <linux/netdevice.h>
45 #include <linux/etherdevice.h>
46 #include <linux/skbuff.h>
47 #include <linux/delay.h>
48 #include <linux/timer.h>
49 #include <linux/slab.h>
50 #include <linux/vmalloc.h>
51 #include <linux/interrupt.h>
52 #include <linux/string.h>
53 #include <linux/pagemap.h>
54 #include <linux/dma-mapping.h>
55 #include <linux/bitops.h>
56 #include <asm/io.h>
57 #include <asm/irq.h>
58 #include <linux/capability.h>
59 #include <linux/in.h>
60 #include <linux/ip.h>
61 #include <linux/ipv6.h>
62 #include <linux/tcp.h>
63 #include <linux/udp.h>
64 #include <net/pkt_sched.h>
65 #include <linux/list.h>
66 #include <linux/reboot.h>
67 #include <net/checksum.h>
68 #include <linux/mii.h>
69 #include <linux/ethtool.h>
70 #include <linux/if_vlan.h>
71 
72 #define BAR_0		0
73 #define BAR_1		1
74 #define BAR_5		5
75 
76 #define INTEL_E1000_ETHERNET_DEVICE(device_id) {\
77 	PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
78 
79 struct e1000_adapter;
80 
81 #include "e1000_hw.h"
82 
83 #define E1000_MAX_INTR			10
84 
85 /*
86  * Count for polling __E1000_RESET condition every 10-20msec.
87  */
88 #define E1000_CHECK_RESET_COUNT	50
89 
90 /* TX/RX descriptor defines */
91 #define E1000_DEFAULT_TXD		256
92 #define E1000_MAX_TXD			256
93 #define E1000_MIN_TXD			48
94 #define E1000_MAX_82544_TXD		4096
95 
96 #define E1000_DEFAULT_RXD		256
97 #define E1000_MAX_RXD			256
98 #define E1000_MIN_RXD			48
99 #define E1000_MAX_82544_RXD		4096
100 
101 #define E1000_MIN_ITR_USECS		10 /* 100000 irq/sec */
102 #define E1000_MAX_ITR_USECS		10000 /* 100    irq/sec */
103 
104 /* this is the size past which hardware will drop packets when setting LPE=0 */
105 #define MAXIMUM_ETHERNET_VLAN_SIZE	1522
106 
107 /* Supported Rx Buffer Sizes */
108 #define E1000_RXBUFFER_128		128    /* Used for packet split */
109 #define E1000_RXBUFFER_256		256    /* Used for packet split */
110 #define E1000_RXBUFFER_512		512
111 #define E1000_RXBUFFER_1024		1024
112 #define E1000_RXBUFFER_2048		2048
113 #define E1000_RXBUFFER_4096		4096
114 #define E1000_RXBUFFER_8192		8192
115 #define E1000_RXBUFFER_16384		16384
116 
117 /* SmartSpeed delimiters */
118 #define E1000_SMARTSPEED_DOWNSHIFT	3
119 #define E1000_SMARTSPEED_MAX		15
120 
121 /* Packet Buffer allocations */
122 #define E1000_PBA_BYTES_SHIFT		0xA
123 #define E1000_TX_HEAD_ADDR_SHIFT	7
124 #define E1000_PBA_TX_MASK		0xFFFF0000
125 
126 /* Flow Control Watermarks */
127 #define E1000_FC_HIGH_DIFF	0x1638 /* High: 5688 bytes below Rx FIFO size */
128 #define E1000_FC_LOW_DIFF	0x1640 /* Low:  5696 bytes below Rx FIFO size */
129 
130 #define E1000_FC_PAUSE_TIME	0xFFFF /* pause for the max or until send xon */
131 
132 /* How many Tx Descriptors do we need to call netif_wake_queue ? */
133 #define E1000_TX_QUEUE_WAKE	16
134 /* How many Rx Buffers do we bundle into one write to the hardware ? */
135 #define E1000_RX_BUFFER_WRITE	16 /* Must be power of 2 */
136 
137 #define AUTO_ALL_MODES		0
138 #define E1000_EEPROM_82544_APM	0x0004
139 #define E1000_EEPROM_APME	0x0400
140 
141 #ifndef E1000_MASTER_SLAVE
142 /* Switch to override PHY master/slave setting */
143 #define E1000_MASTER_SLAVE	e1000_ms_hw_default
144 #endif
145 
146 #define E1000_MNG_VLAN_NONE	(-1)
147 
148 /* wrapper around a pointer to a socket buffer,
149  * so a DMA handle can be stored along with the buffer
150  */
151 struct e1000_buffer {
152 	struct sk_buff *skb;
153 	dma_addr_t dma;
154 	struct page *page;
155 	unsigned long time_stamp;
156 	u16 length;
157 	u16 next_to_watch;
158 	unsigned int segs;
159 	unsigned int bytecount;
160 	u16 mapped_as_page;
161 };
162 
163 struct e1000_tx_ring {
164 	/* pointer to the descriptor ring memory */
165 	void *desc;
166 	/* physical address of the descriptor ring */
167 	dma_addr_t dma;
168 	/* length of descriptor ring in bytes */
169 	unsigned int size;
170 	/* number of descriptors in the ring */
171 	unsigned int count;
172 	/* next descriptor to associate a buffer with */
173 	unsigned int next_to_use;
174 	/* next descriptor to check for DD status bit */
175 	unsigned int next_to_clean;
176 	/* array of buffer information structs */
177 	struct e1000_buffer *buffer_info;
178 
179 	u16 tdh;
180 	u16 tdt;
181 	bool last_tx_tso;
182 };
183 
184 struct e1000_rx_ring {
185 	/* pointer to the descriptor ring memory */
186 	void *desc;
187 	/* physical address of the descriptor ring */
188 	dma_addr_t dma;
189 	/* length of descriptor ring in bytes */
190 	unsigned int size;
191 	/* number of descriptors in the ring */
192 	unsigned int count;
193 	/* next descriptor to associate a buffer with */
194 	unsigned int next_to_use;
195 	/* next descriptor to check for DD status bit */
196 	unsigned int next_to_clean;
197 	/* array of buffer information structs */
198 	struct e1000_buffer *buffer_info;
199 	struct sk_buff *rx_skb_top;
200 
201 	/* cpu for rx queue */
202 	int cpu;
203 
204 	u16 rdh;
205 	u16 rdt;
206 };
207 
208 #define E1000_DESC_UNUSED(R)						\
209 	((((R)->next_to_clean > (R)->next_to_use)			\
210 	  ? 0 : (R)->count) + (R)->next_to_clean - (R)->next_to_use - 1)
211 
212 #define E1000_RX_DESC_EXT(R, i)						\
213 	(&(((union e1000_rx_desc_extended *)((R).desc))[i]))
214 #define E1000_GET_DESC(R, i, type)	(&(((struct type *)((R).desc))[i]))
215 #define E1000_RX_DESC(R, i)		E1000_GET_DESC(R, i, e1000_rx_desc)
216 #define E1000_TX_DESC(R, i)		E1000_GET_DESC(R, i, e1000_tx_desc)
217 #define E1000_CONTEXT_DESC(R, i)	E1000_GET_DESC(R, i, e1000_context_desc)
218 
219 /* board specific private data structure */
220 
221 struct e1000_adapter {
222 	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
223 	u16 mng_vlan_id;
224 	u32 bd_number;
225 	u32 rx_buffer_len;
226 	u32 wol;
227 	u32 smartspeed;
228 	u32 en_mng_pt;
229 	u16 link_speed;
230 	u16 link_duplex;
231 	spinlock_t stats_lock;
232 	unsigned int total_tx_bytes;
233 	unsigned int total_tx_packets;
234 	unsigned int total_rx_bytes;
235 	unsigned int total_rx_packets;
236 	/* Interrupt Throttle Rate */
237 	u32 itr;
238 	u32 itr_setting;
239 	u16 tx_itr;
240 	u16 rx_itr;
241 
242 	u8 fc_autoneg;
243 
244 	/* TX */
245 	struct e1000_tx_ring *tx_ring;      /* One per active queue */
246 	unsigned int restart_queue;
247 	u32 txd_cmd;
248 	u32 tx_int_delay;
249 	u32 tx_abs_int_delay;
250 	u32 gotcl;
251 	u64 gotcl_old;
252 	u64 tpt_old;
253 	u64 colc_old;
254 	u32 tx_timeout_count;
255 	u32 tx_fifo_head;
256 	u32 tx_head_addr;
257 	u32 tx_fifo_size;
258 	u8  tx_timeout_factor;
259 	atomic_t tx_fifo_stall;
260 	bool pcix_82544;
261 	bool detect_tx_hung;
262 	bool dump_buffers;
263 
264 	/* RX */
265 	bool (*clean_rx)(struct e1000_adapter *adapter,
266 			 struct e1000_rx_ring *rx_ring,
267 			 int *work_done, int work_to_do);
268 	void (*alloc_rx_buf)(struct e1000_adapter *adapter,
269 			     struct e1000_rx_ring *rx_ring,
270 			     int cleaned_count);
271 	struct e1000_rx_ring *rx_ring;      /* One per active queue */
272 	struct napi_struct napi;
273 
274 	int num_tx_queues;
275 	int num_rx_queues;
276 
277 	u64 hw_csum_err;
278 	u64 hw_csum_good;
279 	u32 alloc_rx_buff_failed;
280 	u32 rx_int_delay;
281 	u32 rx_abs_int_delay;
282 	bool rx_csum;
283 	u32 gorcl;
284 	u64 gorcl_old;
285 
286 	/* OS defined structs */
287 	struct net_device *netdev;
288 	struct pci_dev *pdev;
289 
290 	/* structs defined in e1000_hw.h */
291 	struct e1000_hw hw;
292 	struct e1000_hw_stats stats;
293 	struct e1000_phy_info phy_info;
294 	struct e1000_phy_stats phy_stats;
295 
296 	u32 test_icr;
297 	struct e1000_tx_ring test_tx_ring;
298 	struct e1000_rx_ring test_rx_ring;
299 
300 	int msg_enable;
301 
302 	/* to not mess up cache alignment, always add to the bottom */
303 	bool tso_force;
304 	bool smart_power_down;	/* phy smart power down */
305 	bool quad_port_a;
306 	unsigned long flags;
307 	u32 eeprom_wol;
308 
309 	/* for ioport free */
310 	int bars;
311 	int need_ioport;
312 
313 	bool discarding;
314 
315 	struct work_struct reset_task;
316 	struct delayed_work watchdog_task;
317 	struct delayed_work fifo_stall_task;
318 	struct delayed_work phy_info_task;
319 };
320 
321 enum e1000_state_t {
322 	__E1000_TESTING,
323 	__E1000_RESETTING,
324 	__E1000_DOWN
325 };
326 
327 #undef pr_fmt
328 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
329 
330 struct net_device *e1000_get_hw_dev(struct e1000_hw *hw);
331 #define e_dbg(format, arg...) \
332 	netdev_dbg(e1000_get_hw_dev(hw), format, ## arg)
333 #define e_err(msglvl, format, arg...) \
334 	netif_err(adapter, msglvl, adapter->netdev, format, ## arg)
335 #define e_info(msglvl, format, arg...) \
336 	netif_info(adapter, msglvl, adapter->netdev, format, ## arg)
337 #define e_warn(msglvl, format, arg...) \
338 	netif_warn(adapter, msglvl, adapter->netdev, format, ## arg)
339 #define e_notice(msglvl, format, arg...) \
340 	netif_notice(adapter, msglvl, adapter->netdev, format, ## arg)
341 #define e_dev_info(format, arg...) \
342 	dev_info(&adapter->pdev->dev, format, ## arg)
343 #define e_dev_warn(format, arg...) \
344 	dev_warn(&adapter->pdev->dev, format, ## arg)
345 #define e_dev_err(format, arg...) \
346 	dev_err(&adapter->pdev->dev, format, ## arg)
347 
348 extern char e1000_driver_name[];
349 extern const char e1000_driver_version[];
350 
351 int e1000_up(struct e1000_adapter *adapter);
352 void e1000_down(struct e1000_adapter *adapter);
353 void e1000_reinit_locked(struct e1000_adapter *adapter);
354 void e1000_reset(struct e1000_adapter *adapter);
355 int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx);
356 int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
357 int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
358 void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
359 void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
360 void e1000_update_stats(struct e1000_adapter *adapter);
361 bool e1000_has_link(struct e1000_adapter *adapter);
362 void e1000_power_up_phy(struct e1000_adapter *);
363 void e1000_set_ethtool_ops(struct net_device *netdev);
364 void e1000_check_options(struct e1000_adapter *adapter);
365 char *e1000_get_hw_dev_name(struct e1000_hw *hw);
366 
367 #endif /* _E1000_H_ */
368