1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Intel network device configuration 4# 5 6config NET_VENDOR_INTEL 7 bool "Intel devices" 8 default y 9 help 10 If you have a network (Ethernet) card belonging to this class, say Y. 11 12 Note that the answer to this question doesn't directly affect the 13 kernel: saying N will just cause the configurator to skip all 14 the questions about Intel cards. If you say Y, you will be asked for 15 your specific card in the following questions. 16 17if NET_VENDOR_INTEL 18 19config E100 20 tristate "Intel(R) PRO/100+ support" 21 depends on PCI 22 select MII 23 help 24 This driver supports Intel(R) PRO/100 family of adapters. 25 To verify that your adapter is supported, find the board ID number 26 on the adapter. Look for a label that has a barcode and a number 27 in the format 123456-001 (six digits hyphen three digits). 28 29 Use the above information and the Adapter & Driver ID Guide that 30 can be located at: 31 32 <http://support.intel.com> 33 34 to identify the adapter. 35 36 More specific information on configuring the driver is in 37 <file:Documentation/networking/device_drivers/ethernet/intel/e100.rst>. 38 39 To compile this driver as a module, choose M here. The module 40 will be called e100. 41 42config E1000 43 tristate "Intel(R) PRO/1000 Gigabit Ethernet support" 44 depends on PCI 45 help 46 This driver supports Intel(R) PRO/1000 gigabit ethernet family of 47 adapters. For more information on how to identify your adapter, go 48 to the Adapter & Driver ID Guide that can be located at: 49 50 <http://support.intel.com> 51 52 More specific information on configuring the driver is in 53 <file:Documentation/networking/device_drivers/ethernet/intel/e1000.rst>. 54 55 To compile this driver as a module, choose M here. The module 56 will be called e1000. 57 58config E1000E 59 tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support" 60 depends on PCI && (!SPARC32 || BROKEN) 61 select CRC32 62 imply PTP_1588_CLOCK 63 help 64 This driver supports the PCI-Express Intel(R) PRO/1000 gigabit 65 ethernet family of adapters. For PCI or PCI-X e1000 adapters, 66 use the regular e1000 driver For more information on how to 67 identify your adapter, go to the Adapter & Driver ID Guide that 68 can be located at: 69 70 <http://support.intel.com> 71 72 More specific information on configuring the driver is in 73 <file:Documentation/networking/device_drivers/ethernet/intel/e1000e.rst>. 74 75 To compile this driver as a module, choose M here. The module 76 will be called e1000e. 77 78config E1000E_HWTS 79 bool "Support HW cross-timestamp on PCH devices" 80 default y 81 depends on E1000E && X86 82 help 83 Say Y to enable hardware supported cross-timestamping on PCH 84 devices. The cross-timestamp is available through the PTP clock 85 driver precise cross-timestamp ioctl (PTP_SYS_OFFSET_PRECISE). 86 87config IGB 88 tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support" 89 depends on PCI 90 imply PTP_1588_CLOCK 91 select I2C 92 select I2C_ALGOBIT 93 help 94 This driver supports Intel(R) 82575/82576 gigabit ethernet family of 95 adapters. For more information on how to identify your adapter, go 96 to the Adapter & Driver ID Guide that can be located at: 97 98 <http://support.intel.com> 99 100 More specific information on configuring the driver is in 101 <file:Documentation/networking/device_drivers/ethernet/intel/igb.rst>. 102 103 To compile this driver as a module, choose M here. The module 104 will be called igb. 105 106config IGB_HWMON 107 bool "Intel(R) PCI-Express Gigabit adapters HWMON support" 108 default y 109 depends on IGB && HWMON && !(IGB=y && HWMON=m) 110 help 111 Say Y if you want to expose thermal sensor data on Intel devices. 112 113 Some of our devices contain thermal sensors, both external and internal. 114 This data is available via the hwmon sysfs interface and exposes 115 the onboard sensors. 116 117config IGB_DCA 118 bool "Direct Cache Access (DCA) Support" 119 default y 120 depends on IGB && DCA && !(IGB=y && DCA=m) 121 help 122 Say Y here if you want to use Direct Cache Access (DCA) in the 123 driver. DCA is a method for warming the CPU cache before data 124 is used, with the intent of lessening the impact of cache misses. 125 126config IGBVF 127 tristate "Intel(R) 82576 Virtual Function Ethernet support" 128 depends on PCI 129 help 130 This driver supports Intel(R) 82576 virtual functions. For more 131 information on how to identify your adapter, go to the Adapter & 132 Driver ID Guide that can be located at: 133 134 <http://support.intel.com> 135 136 More specific information on configuring the driver is in 137 <file:Documentation/networking/device_drivers/ethernet/intel/igbvf.rst>. 138 139 To compile this driver as a module, choose M here. The module 140 will be called igbvf. 141 142config IXGB 143 tristate "Intel(R) PRO/10GbE support" 144 depends on PCI 145 help 146 This driver supports Intel(R) PRO/10GbE family of adapters for 147 PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver 148 instead. For more information on how to identify your adapter, go 149 to the Adapter & Driver ID Guide that can be located at: 150 151 <http://support.intel.com> 152 153 More specific information on configuring the driver is in 154 <file:Documentation/networking/device_drivers/ethernet/intel/ixgb.rst>. 155 156 To compile this driver as a module, choose M here. The module 157 will be called ixgb. 158 159config IXGBE 160 tristate "Intel(R) 10GbE PCI Express adapters support" 161 depends on PCI 162 select MDIO 163 select PHYLIB 164 imply PTP_1588_CLOCK 165 help 166 This driver supports Intel(R) 10GbE PCI Express family of 167 adapters. For more information on how to identify your adapter, go 168 to the Adapter & Driver ID Guide that can be located at: 169 170 <http://support.intel.com> 171 172 More specific information on configuring the driver is in 173 <file:Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst>. 174 175 To compile this driver as a module, choose M here. The module 176 will be called ixgbe. 177 178config IXGBE_HWMON 179 bool "Intel(R) 10GbE PCI Express adapters HWMON support" 180 default y 181 depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m) 182 help 183 Say Y if you want to expose the thermal sensor data on some of 184 our cards, via a hwmon sysfs interface. 185 186config IXGBE_DCA 187 bool "Direct Cache Access (DCA) Support" 188 default y 189 depends on IXGBE && DCA && !(IXGBE=y && DCA=m) 190 help 191 Say Y here if you want to use Direct Cache Access (DCA) in the 192 driver. DCA is a method for warming the CPU cache before data 193 is used, with the intent of lessening the impact of cache misses. 194 195config IXGBE_DCB 196 bool "Data Center Bridging (DCB) Support" 197 default n 198 depends on IXGBE && DCB 199 help 200 Say Y here if you want to use Data Center Bridging (DCB) in the 201 driver. 202 203 If unsure, say N. 204 205config IXGBE_IPSEC 206 bool "IPSec XFRM cryptography-offload acceleration" 207 depends on IXGBE 208 depends on XFRM_OFFLOAD 209 default y 210 select XFRM_ALGO 211 help 212 Enable support for IPSec offload in ixgbe.ko 213 214config IXGBEVF 215 tristate "Intel(R) 10GbE PCI Express Virtual Function Ethernet support" 216 depends on PCI_MSI 217 help 218 This driver supports Intel(R) PCI Express virtual functions for the 219 Intel(R) ixgbe driver. For more information on how to identify your 220 adapter, go to the Adapter & Driver ID Guide that can be located at: 221 222 <http://support.intel.com> 223 224 More specific information on configuring the driver is in 225 <file:Documentation/networking/device_drivers/ethernet/intel/ixgbevf.rst>. 226 227 To compile this driver as a module, choose M here. The module 228 will be called ixgbevf. MSI-X interrupt support is required 229 for this driver to work correctly. 230 231config IXGBEVF_IPSEC 232 bool "IPSec XFRM cryptography-offload acceleration" 233 depends on IXGBEVF 234 depends on XFRM_OFFLOAD 235 default y 236 select XFRM_ALGO 237 help 238 Enable support for IPSec offload in ixgbevf.ko 239 240config I40E 241 tristate "Intel(R) Ethernet Controller XL710 Family support" 242 imply PTP_1588_CLOCK 243 depends on PCI 244 help 245 This driver supports Intel(R) Ethernet Controller XL710 Family of 246 devices. For more information on how to identify your adapter, go 247 to the Adapter & Driver ID Guide that can be located at: 248 249 <http://support.intel.com> 250 251 More specific information on configuring the driver is in 252 <file:Documentation/networking/device_drivers/ethernet/intel/i40e.rst>. 253 254 To compile this driver as a module, choose M here. The module 255 will be called i40e. 256 257config I40E_DCB 258 bool "Data Center Bridging (DCB) Support" 259 default n 260 depends on I40E && DCB 261 help 262 Say Y here if you want to use Data Center Bridging (DCB) in the 263 driver. 264 265 If unsure, say N. 266 267# this is here to allow seamless migration from I40EVF --> IAVF name 268# so that CONFIG_IAVF symbol will always mirror the state of CONFIG_I40EVF 269config IAVF 270 tristate 271config I40EVF 272 tristate "Intel(R) Ethernet Adaptive Virtual Function support" 273 select IAVF 274 depends on PCI_MSI 275 help 276 This driver supports virtual functions for Intel XL710, 277 X710, X722, XXV710, and all devices advertising support for 278 Intel Ethernet Adaptive Virtual Function devices. For more 279 information on how to identify your adapter, go to the Adapter 280 & Driver ID Guide that can be located at: 281 282 <https://support.intel.com> 283 284 This driver was formerly named i40evf. 285 286 More specific information on configuring the driver is in 287 <file:Documentation/networking/device_drivers/ethernet/intel/iavf.rst>. 288 289 To compile this driver as a module, choose M here. The module 290 will be called iavf. MSI-X interrupt support is required 291 for this driver to work correctly. 292 293config ICE 294 tristate "Intel(R) Ethernet Connection E800 Series Support" 295 default n 296 depends on PCI_MSI 297 select NET_DEVLINK 298 select PLDMFW 299 help 300 This driver supports Intel(R) Ethernet Connection E800 Series of 301 devices. For more information on how to identify your adapter, go 302 to the Adapter & Driver ID Guide that can be located at: 303 304 <http://support.intel.com> 305 306 More specific information on configuring the driver is in 307 <file:Documentation/networking/device_drivers/ethernet/intel/ice.rst>. 308 309 To compile this driver as a module, choose M here. The module 310 will be called ice. 311 312config FM10K 313 tristate "Intel(R) FM10000 Ethernet Switch Host Interface Support" 314 default n 315 depends on PCI_MSI 316 imply PTP_1588_CLOCK 317 help 318 This driver supports Intel(R) FM10000 Ethernet Switch Host 319 Interface. For more information on how to identify your adapter, 320 go to the Adapter & Driver ID Guide that can be located at: 321 322 <http://support.intel.com> 323 324 More specific information on configuring the driver is in 325 <file:Documentation/networking/device_drivers/ethernet/intel/fm10k.rst>. 326 327 To compile this driver as a module, choose M here. The module 328 will be called fm10k. MSI-X interrupt support is required 329 330config IGC 331 tristate "Intel(R) Ethernet Controller I225-LM/I225-V support" 332 default n 333 depends on PCI 334 help 335 This driver supports Intel(R) Ethernet Controller I225-LM/I225-V 336 family of adapters. 337 338 For more information on how to identify your adapter, go 339 to the Adapter & Driver ID Guide that can be located at: 340 341 <http://support.intel.com> 342 343 To compile this driver as a module, choose M here. The module 344 will be called igc. 345 346endif # NET_VENDOR_INTEL 347