1# 2# Intel network device configuration 3# 4 5config NET_VENDOR_INTEL 6 bool "Intel devices" 7 default y 8 ---help--- 9 If you have a network (Ethernet) card belonging to this class, say Y. 10 11 Note that the answer to this question doesn't directly affect the 12 kernel: saying N will just cause the configurator to skip all 13 the questions about Intel cards. If you say Y, you will be asked for 14 your specific card in the following questions. 15 16if NET_VENDOR_INTEL 17 18config E100 19 tristate "Intel(R) PRO/100+ support" 20 depends on PCI 21 select MII 22 ---help--- 23 This driver supports Intel(R) PRO/100 family of adapters. 24 To verify that your adapter is supported, find the board ID number 25 on the adapter. Look for a label that has a barcode and a number 26 in the format 123456-001 (six digits hyphen three digits). 27 28 Use the above information and the Adapter & Driver ID Guide that 29 can be located at: 30 31 <http://support.intel.com> 32 33 to identify the adapter. 34 35 More specific information on configuring the driver is in 36 <file:Documentation/networking/device_drivers/intel/e100.rst>. 37 38 To compile this driver as a module, choose M here. The module 39 will be called e100. 40 41config E1000 42 tristate "Intel(R) PRO/1000 Gigabit Ethernet support" 43 depends on PCI 44 ---help--- 45 This driver supports Intel(R) PRO/1000 gigabit ethernet family of 46 adapters. For more information on how to identify your adapter, go 47 to the Adapter & Driver ID Guide that can be located at: 48 49 <http://support.intel.com> 50 51 More specific information on configuring the driver is in 52 <file:Documentation/networking/device_drivers/intel/e1000.rst>. 53 54 To compile this driver as a module, choose M here. The module 55 will be called e1000. 56 57config E1000E 58 tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support" 59 depends on PCI && (!SPARC32 || BROKEN) 60 select CRC32 61 imply PTP_1588_CLOCK 62 ---help--- 63 This driver supports the PCI-Express Intel(R) PRO/1000 gigabit 64 ethernet family of adapters. For PCI or PCI-X e1000 adapters, 65 use the regular e1000 driver For more information on how to 66 identify your adapter, go to the Adapter & Driver ID Guide that 67 can be located at: 68 69 <http://support.intel.com> 70 71 More specific information on configuring the driver is in 72 <file:Documentation/networking/device_drivers/intel/e1000e.rst>. 73 74 To compile this driver as a module, choose M here. The module 75 will be called e1000e. 76 77config E1000E_HWTS 78 bool "Support HW cross-timestamp on PCH devices" 79 default y 80 depends on E1000E && X86 81 ---help--- 82 Say Y to enable hardware supported cross-timestamping on PCH 83 devices. The cross-timestamp is available through the PTP clock 84 driver precise cross-timestamp ioctl (PTP_SYS_OFFSET_PRECISE). 85 86config IGB 87 tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support" 88 depends on PCI 89 imply PTP_1588_CLOCK 90 select I2C 91 select I2C_ALGOBIT 92 ---help--- 93 This driver supports Intel(R) 82575/82576 gigabit ethernet family of 94 adapters. For more information on how to identify your adapter, go 95 to the Adapter & Driver ID Guide that can be located at: 96 97 <http://support.intel.com> 98 99 More specific information on configuring the driver is in 100 <file:Documentation/networking/device_drivers/intel/igb.rst>. 101 102 To compile this driver as a module, choose M here. The module 103 will be called igb. 104 105config IGB_HWMON 106 bool "Intel(R) PCI-Express Gigabit adapters HWMON support" 107 default y 108 depends on IGB && HWMON && !(IGB=y && HWMON=m) 109 ---help--- 110 Say Y if you want to expose thermal sensor data on Intel devices. 111 112 Some of our devices contain thermal sensors, both external and internal. 113 This data is available via the hwmon sysfs interface and exposes 114 the onboard sensors. 115 116config IGB_DCA 117 bool "Direct Cache Access (DCA) Support" 118 default y 119 depends on IGB && DCA && !(IGB=y && DCA=m) 120 ---help--- 121 Say Y here if you want to use Direct Cache Access (DCA) in the 122 driver. DCA is a method for warming the CPU cache before data 123 is used, with the intent of lessening the impact of cache misses. 124 125config IGBVF 126 tristate "Intel(R) 82576 Virtual Function Ethernet support" 127 depends on PCI 128 ---help--- 129 This driver supports Intel(R) 82576 virtual functions. For more 130 information on how to identify your adapter, go to the Adapter & 131 Driver ID Guide that can be located at: 132 133 <http://support.intel.com> 134 135 More specific information on configuring the driver is in 136 <file:Documentation/networking/device_drivers/intel/igbvf.rst>. 137 138 To compile this driver as a module, choose M here. The module 139 will be called igbvf. 140 141config IXGB 142 tristate "Intel(R) PRO/10GbE support" 143 depends on PCI 144 ---help--- 145 This driver supports Intel(R) PRO/10GbE family of adapters for 146 PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver 147 instead. For more information on how to identify your adapter, go 148 to the Adapter & Driver ID Guide that can be located at: 149 150 <http://support.intel.com> 151 152 More specific information on configuring the driver is in 153 <file:Documentation/networking/device_drivers/intel/ixgb.rst>. 154 155 To compile this driver as a module, choose M here. The module 156 will be called ixgb. 157 158config IXGBE 159 tristate "Intel(R) 10GbE PCI Express adapters support" 160 depends on PCI 161 select MDIO 162 select PHYLIB 163 imply PTP_1588_CLOCK 164 ---help--- 165 This driver supports Intel(R) 10GbE PCI Express family of 166 adapters. For more information on how to identify your adapter, go 167 to the Adapter & Driver ID Guide that can be located at: 168 169 <http://support.intel.com> 170 171 More specific information on configuring the driver is in 172 <file:Documentation/networking/device_drivers/intel/ixgbe.rst>. 173 174 To compile this driver as a module, choose M here. The module 175 will be called ixgbe. 176 177config IXGBE_HWMON 178 bool "Intel(R) 10GbE PCI Express adapters HWMON support" 179 default y 180 depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m) 181 ---help--- 182 Say Y if you want to expose the thermal sensor data on some of 183 our cards, via a hwmon sysfs interface. 184 185config IXGBE_DCA 186 bool "Direct Cache Access (DCA) Support" 187 default y 188 depends on IXGBE && DCA && !(IXGBE=y && DCA=m) 189 ---help--- 190 Say Y here if you want to use Direct Cache Access (DCA) in the 191 driver. DCA is a method for warming the CPU cache before data 192 is used, with the intent of lessening the impact of cache misses. 193 194config IXGBE_DCB 195 bool "Data Center Bridging (DCB) Support" 196 default n 197 depends on IXGBE && DCB 198 ---help--- 199 Say Y here if you want to use Data Center Bridging (DCB) in the 200 driver. 201 202 If unsure, say N. 203 204config IXGBE_IPSEC 205 bool "IPSec XFRM cryptography-offload acceleration" 206 depends on IXGBE 207 depends on XFRM_OFFLOAD 208 default y 209 select XFRM_ALGO 210 ---help--- 211 Enable support for IPSec offload in ixgbe.ko 212 213config IXGBEVF 214 tristate "Intel(R) 10GbE PCI Express Virtual Function Ethernet support" 215 depends on PCI_MSI 216 ---help--- 217 This driver supports Intel(R) PCI Express virtual functions for the 218 Intel(R) ixgbe driver. For more information on how to identify your 219 adapter, go to the Adapter & Driver ID Guide that can be located at: 220 221 <http://support.intel.com> 222 223 More specific information on configuring the driver is in 224 <file:Documentation/networking/device_drivers/intel/ixgbevf.rst>. 225 226 To compile this driver as a module, choose M here. The module 227 will be called ixgbevf. MSI-X interrupt support is required 228 for this driver to work correctly. 229 230config IXGBEVF_IPSEC 231 bool "IPSec XFRM cryptography-offload acceleration" 232 depends on IXGBEVF 233 depends on XFRM_OFFLOAD 234 default y 235 select XFRM_ALGO 236 ---help--- 237 Enable support for IPSec offload in ixgbevf.ko 238 239config I40E 240 tristate "Intel(R) Ethernet Controller XL710 Family support" 241 imply PTP_1588_CLOCK 242 depends on PCI 243 ---help--- 244 This driver supports Intel(R) Ethernet Controller XL710 Family of 245 devices. For more information on how to identify your adapter, go 246 to the Adapter & Driver ID Guide that can be located at: 247 248 <http://support.intel.com> 249 250 More specific information on configuring the driver is in 251 <file:Documentation/networking/device_drivers/intel/i40e.rst>. 252 253 To compile this driver as a module, choose M here. The module 254 will be called i40e. 255 256config I40E_DCB 257 bool "Data Center Bridging (DCB) Support" 258 default n 259 depends on I40E && DCB 260 ---help--- 261 Say Y here if you want to use Data Center Bridging (DCB) in the 262 driver. 263 264 If unsure, say N. 265 266# this is here to allow seamless migration from I40EVF --> IAVF name 267# so that CONFIG_IAVF symbol will always mirror the state of CONFIG_I40EVF 268config IAVF 269 tristate 270config I40EVF 271 tristate "Intel(R) Ethernet Adaptive Virtual Function support" 272 select IAVF 273 depends on PCI_MSI 274 ---help--- 275 This driver supports virtual functions for Intel XL710, 276 X710, X722, XXV710, and all devices advertising support for 277 Intel Ethernet Adaptive Virtual Function devices. For more 278 information on how to identify your adapter, go to the Adapter 279 & Driver ID Guide that can be located at: 280 281 <https://support.intel.com> 282 283 This driver was formerly named i40evf. 284 285 More specific information on configuring the driver is in 286 <file:Documentation/networking/device_drivers/intel/iavf.rst>. 287 288 To compile this driver as a module, choose M here. The module 289 will be called iavf. MSI-X interrupt support is required 290 for this driver to work correctly. 291 292config ICE 293 tristate "Intel(R) Ethernet Connection E800 Series Support" 294 default n 295 depends on PCI_MSI 296 ---help--- 297 This driver supports Intel(R) Ethernet Connection E800 Series of 298 devices. For more information on how to identify your adapter, go 299 to the Adapter & Driver ID Guide that can be located at: 300 301 <http://support.intel.com> 302 303 More specific information on configuring the driver is in 304 <file:Documentation/networking/device_drivers/intel/ice.rst>. 305 306 To compile this driver as a module, choose M here. The module 307 will be called ice. 308 309config FM10K 310 tristate "Intel(R) FM10000 Ethernet Switch Host Interface Support" 311 default n 312 depends on PCI_MSI 313 imply PTP_1588_CLOCK 314 ---help--- 315 This driver supports Intel(R) FM10000 Ethernet Switch Host 316 Interface. For more information on how to identify your adapter, 317 go to the Adapter & Driver ID Guide that can be located at: 318 319 <http://support.intel.com> 320 321 More specific information on configuring the driver is in 322 <file:Documentation/networking/device_drivers/intel/fm10k.rst>. 323 324 To compile this driver as a module, choose M here. The module 325 will be called fm10k. MSI-X interrupt support is required 326 327config IGC 328 tristate "Intel(R) Ethernet Controller I225-LM/I225-V support" 329 default n 330 depends on PCI 331 ---help--- 332 This driver supports Intel(R) Ethernet Controller I225-LM/I225-V 333 family of adapters. 334 335 For more information on how to identify your adapter, go 336 to the Adapter & Driver ID Guide that can be located at: 337 338 <http://support.intel.com> 339 340 To compile this driver as a module, choose M here. The module 341 will be called igc. 342 343endif # NET_VENDOR_INTEL 344