1# 2# Intel network device configuration 3# 4 5config NET_VENDOR_INTEL 6 bool "Intel devices" 7 default y 8 ---help--- 9 If you have a network (Ethernet) card belonging to this class, say Y. 10 11 Note that the answer to this question doesn't directly affect the 12 kernel: saying N will just cause the configurator to skip all 13 the questions about Intel cards. If you say Y, you will be asked for 14 your specific card in the following questions. 15 16if NET_VENDOR_INTEL 17 18config E100 19 tristate "Intel(R) PRO/100+ support" 20 depends on PCI 21 select MII 22 ---help--- 23 This driver supports Intel(R) PRO/100 family of adapters. 24 To verify that your adapter is supported, find the board ID number 25 on the adapter. Look for a label that has a barcode and a number 26 in the format 123456-001 (six digits hyphen three digits). 27 28 Use the above information and the Adapter & Driver ID Guide that 29 can be located at: 30 31 <http://support.intel.com> 32 33 to identify the adapter. 34 35 More specific information on configuring the driver is in 36 <file:Documentation/networking/e100.txt>. 37 38 To compile this driver as a module, choose M here. The module 39 will be called e100. 40 41config E1000 42 tristate "Intel(R) PRO/1000 Gigabit Ethernet support" 43 depends on PCI 44 ---help--- 45 This driver supports Intel(R) PRO/1000 gigabit ethernet family of 46 adapters. For more information on how to identify your adapter, go 47 to the Adapter & Driver ID Guide that can be located at: 48 49 <http://support.intel.com> 50 51 More specific information on configuring the driver is in 52 <file:Documentation/networking/e1000.txt>. 53 54 To compile this driver as a module, choose M here. The module 55 will be called e1000. 56 57config E1000E 58 tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support" 59 depends on PCI && (!SPARC32 || BROKEN) 60 select CRC32 61 imply PTP_1588_CLOCK 62 ---help--- 63 This driver supports the PCI-Express Intel(R) PRO/1000 gigabit 64 ethernet family of adapters. For PCI or PCI-X e1000 adapters, 65 use the regular e1000 driver For more information on how to 66 identify your adapter, go to the Adapter & Driver ID Guide that 67 can be located at: 68 69 <http://support.intel.com> 70 71 To compile this driver as a module, choose M here. The module 72 will be called e1000e. 73 74config E1000E_HWTS 75 bool "Support HW cross-timestamp on PCH devices" 76 default y 77 depends on E1000E && X86 78 ---help--- 79 Say Y to enable hardware supported cross-timestamping on PCH 80 devices. The cross-timestamp is available through the PTP clock 81 driver precise cross-timestamp ioctl (PTP_SYS_OFFSET_PRECISE). 82 83config IGB 84 tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support" 85 depends on PCI 86 imply PTP_1588_CLOCK 87 select I2C 88 select I2C_ALGOBIT 89 ---help--- 90 This driver supports Intel(R) 82575/82576 gigabit ethernet family of 91 adapters. For more information on how to identify your adapter, go 92 to the Adapter & Driver ID Guide that can be located at: 93 94 <http://support.intel.com> 95 96 More specific information on configuring the driver is in 97 <file:Documentation/networking/e1000.txt>. 98 99 To compile this driver as a module, choose M here. The module 100 will be called igb. 101 102config IGB_HWMON 103 bool "Intel(R) PCI-Express Gigabit adapters HWMON support" 104 default y 105 depends on IGB && HWMON && !(IGB=y && HWMON=m) 106 ---help--- 107 Say Y if you want to expose thermal sensor data on Intel devices. 108 109 Some of our devices contain thermal sensors, both external and internal. 110 This data is available via the hwmon sysfs interface and exposes 111 the onboard sensors. 112 113config IGB_DCA 114 bool "Direct Cache Access (DCA) Support" 115 default y 116 depends on IGB && DCA && !(IGB=y && DCA=m) 117 ---help--- 118 Say Y here if you want to use Direct Cache Access (DCA) in the 119 driver. DCA is a method for warming the CPU cache before data 120 is used, with the intent of lessening the impact of cache misses. 121 122config IGBVF 123 tristate "Intel(R) 82576 Virtual Function Ethernet support" 124 depends on PCI 125 ---help--- 126 This driver supports Intel(R) 82576 virtual functions. For more 127 information on how to identify your adapter, go to the Adapter & 128 Driver ID Guide that can be located at: 129 130 <http://support.intel.com> 131 132 More specific information on configuring the driver is in 133 <file:Documentation/networking/e1000.txt>. 134 135 To compile this driver as a module, choose M here. The module 136 will be called igbvf. 137 138config IXGB 139 tristate "Intel(R) PRO/10GbE support" 140 depends on PCI 141 ---help--- 142 This driver supports Intel(R) PRO/10GbE family of adapters for 143 PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver 144 instead. For more information on how to identify your adapter, go 145 to the Adapter & Driver ID Guide that can be located at: 146 147 <http://support.intel.com> 148 149 More specific information on configuring the driver is in 150 <file:Documentation/networking/ixgb.txt>. 151 152 To compile this driver as a module, choose M here. The module 153 will be called ixgb. 154 155config IXGBE 156 tristate "Intel(R) 10GbE PCI Express adapters support" 157 depends on PCI 158 select MDIO 159 imply PTP_1588_CLOCK 160 ---help--- 161 This driver supports Intel(R) 10GbE PCI Express family of 162 adapters. For more information on how to identify your adapter, go 163 to the Adapter & Driver ID Guide that can be located at: 164 165 <http://support.intel.com> 166 167 To compile this driver as a module, choose M here. The module 168 will be called ixgbe. 169 170config IXGBE_HWMON 171 bool "Intel(R) 10GbE PCI Express adapters HWMON support" 172 default y 173 depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m) 174 ---help--- 175 Say Y if you want to expose the thermal sensor data on some of 176 our cards, via a hwmon sysfs interface. 177 178config IXGBE_DCA 179 bool "Direct Cache Access (DCA) Support" 180 default y 181 depends on IXGBE && DCA && !(IXGBE=y && DCA=m) 182 ---help--- 183 Say Y here if you want to use Direct Cache Access (DCA) in the 184 driver. DCA is a method for warming the CPU cache before data 185 is used, with the intent of lessening the impact of cache misses. 186 187config IXGBE_DCB 188 bool "Data Center Bridging (DCB) Support" 189 default n 190 depends on IXGBE && DCB 191 ---help--- 192 Say Y here if you want to use Data Center Bridging (DCB) in the 193 driver. 194 195 If unsure, say N. 196 197config IXGBEVF 198 tristate "Intel(R) 10GbE PCI Express Virtual Function Ethernet support" 199 depends on PCI_MSI 200 ---help--- 201 This driver supports Intel(R) PCI Express virtual functions for the 202 Intel(R) ixgbe driver. For more information on how to identify your 203 adapter, go to the Adapter & Driver ID Guide that can be located at: 204 205 <http://support.intel.com> 206 207 More specific information on configuring the driver is in 208 <file:Documentation/networking/ixgbevf.txt>. 209 210 To compile this driver as a module, choose M here. The module 211 will be called ixgbevf. MSI-X interrupt support is required 212 for this driver to work correctly. 213 214config I40E 215 tristate "Intel(R) Ethernet Controller XL710 Family support" 216 imply PTP_1588_CLOCK 217 depends on PCI 218 ---help--- 219 This driver supports Intel(R) Ethernet Controller XL710 Family of 220 devices. For more information on how to identify your adapter, go 221 to the Adapter & Driver ID Guide that can be located at: 222 223 <http://support.intel.com> 224 225 To compile this driver as a module, choose M here. The module 226 will be called i40e. 227 228config I40E_DCB 229 bool "Data Center Bridging (DCB) Support" 230 default n 231 depends on I40E && DCB 232 ---help--- 233 Say Y here if you want to use Data Center Bridging (DCB) in the 234 driver. 235 236 If unsure, say N. 237 238config I40EVF 239 tristate "Intel(R) Ethernet Adaptive Virtual Function support" 240 depends on PCI_MSI 241 ---help--- 242 This driver supports virtual functions for Intel XL710, 243 X710, X722, and all devices advertising support for Intel 244 Ethernet Adaptive Virtual Function devices. For more 245 information on how to identify your adapter, go to the Adapter 246 & Driver ID Guide that can be located at: 247 248 <http://support.intel.com> 249 250 To compile this driver as a module, choose M here. The module 251 will be called i40evf. MSI-X interrupt support is required 252 for this driver to work correctly. 253 254config FM10K 255 tristate "Intel(R) FM10000 Ethernet Switch Host Interface Support" 256 default n 257 depends on PCI_MSI 258 imply PTP_1588_CLOCK 259 ---help--- 260 This driver supports Intel(R) FM10000 Ethernet Switch Host 261 Interface. For more information on how to identify your adapter, 262 go to the Adapter & Driver ID Guide that can be located at: 263 264 <http://support.intel.com> 265 266 To compile this driver as a module, choose M here. The module 267 will be called fm10k. MSI-X interrupt support is required 268 269endif # NET_VENDOR_INTEL 270