1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Intel network device configuration 4# 5 6config NET_VENDOR_INTEL 7 bool "Intel devices" 8 default y 9 help 10 If you have a network (Ethernet) card belonging to this class, say Y. 11 12 Note that the answer to this question doesn't directly affect the 13 kernel: saying N will just cause the configurator to skip all 14 the questions about Intel cards. If you say Y, you will be asked for 15 your specific card in the following questions. 16 17if NET_VENDOR_INTEL 18 19config E100 20 tristate "Intel(R) PRO/100+ support" 21 depends on PCI 22 select MII 23 help 24 This driver supports Intel(R) PRO/100 family of adapters. 25 To verify that your adapter is supported, find the board ID number 26 on the adapter. Look for a label that has a barcode and a number 27 in the format 123456-001 (six digits hyphen three digits). 28 29 Use the above information and the Adapter & Driver ID Guide that 30 can be located at: 31 32 <http://support.intel.com> 33 34 to identify the adapter. 35 36 More specific information on configuring the driver is in 37 <file:Documentation/networking/device_drivers/ethernet/intel/e100.rst>. 38 39 To compile this driver as a module, choose M here. The module 40 will be called e100. 41 42config E1000 43 tristate "Intel(R) PRO/1000 Gigabit Ethernet support" 44 depends on PCI 45 help 46 This driver supports Intel(R) PRO/1000 gigabit ethernet family of 47 adapters. For more information on how to identify your adapter, go 48 to the Adapter & Driver ID Guide that can be located at: 49 50 <http://support.intel.com> 51 52 More specific information on configuring the driver is in 53 <file:Documentation/networking/device_drivers/ethernet/intel/e1000.rst>. 54 55 To compile this driver as a module, choose M here. The module 56 will be called e1000. 57 58config E1000E 59 tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support" 60 depends on PCI && (!SPARC32 || BROKEN) 61 depends on PTP_1588_CLOCK_OPTIONAL 62 select CRC32 63 help 64 This driver supports the PCI-Express Intel(R) PRO/1000 gigabit 65 ethernet family of adapters. For PCI or PCI-X e1000 adapters, 66 use the regular e1000 driver For more information on how to 67 identify your adapter, go to the Adapter & Driver ID Guide that 68 can be located at: 69 70 <http://support.intel.com> 71 72 More specific information on configuring the driver is in 73 <file:Documentation/networking/device_drivers/ethernet/intel/e1000e.rst>. 74 75 To compile this driver as a module, choose M here. The module 76 will be called e1000e. 77 78config E1000E_HWTS 79 bool "Support HW cross-timestamp on PCH devices" 80 default y 81 depends on E1000E && X86 82 help 83 Say Y to enable hardware supported cross-timestamping on PCH 84 devices. The cross-timestamp is available through the PTP clock 85 driver precise cross-timestamp ioctl (PTP_SYS_OFFSET_PRECISE). 86 87config IGB 88 tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support" 89 depends on PCI 90 depends on PTP_1588_CLOCK_OPTIONAL 91 select I2C 92 select I2C_ALGOBIT 93 help 94 This driver supports Intel(R) 82575/82576 gigabit ethernet family of 95 adapters. For more information on how to identify your adapter, go 96 to the Adapter & Driver ID Guide that can be located at: 97 98 <http://support.intel.com> 99 100 More specific information on configuring the driver is in 101 <file:Documentation/networking/device_drivers/ethernet/intel/igb.rst>. 102 103 To compile this driver as a module, choose M here. The module 104 will be called igb. 105 106config IGB_HWMON 107 bool "Intel(R) PCI-Express Gigabit adapters HWMON support" 108 default y 109 depends on IGB && HWMON && !(IGB=y && HWMON=m) 110 help 111 Say Y if you want to expose thermal sensor data on Intel devices. 112 113 Some of our devices contain thermal sensors, both external and internal. 114 This data is available via the hwmon sysfs interface and exposes 115 the onboard sensors. 116 117config IGB_DCA 118 bool "Direct Cache Access (DCA) Support" 119 default y 120 depends on IGB && DCA && !(IGB=y && DCA=m) 121 help 122 Say Y here if you want to use Direct Cache Access (DCA) in the 123 driver. DCA is a method for warming the CPU cache before data 124 is used, with the intent of lessening the impact of cache misses. 125 126config IGBVF 127 tristate "Intel(R) 82576 Virtual Function Ethernet support" 128 depends on PCI 129 help 130 This driver supports Intel(R) 82576 virtual functions. For more 131 information on how to identify your adapter, go to the Adapter & 132 Driver ID Guide that can be located at: 133 134 <http://support.intel.com> 135 136 More specific information on configuring the driver is in 137 <file:Documentation/networking/device_drivers/ethernet/intel/igbvf.rst>. 138 139 To compile this driver as a module, choose M here. The module 140 will be called igbvf. 141 142config IXGB 143 tristate "Intel(R) PRO/10GbE support" 144 depends on PCI 145 help 146 This driver supports Intel(R) PRO/10GbE family of adapters for 147 PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver 148 instead. For more information on how to identify your adapter, go 149 to the Adapter & Driver ID Guide that can be located at: 150 151 <http://support.intel.com> 152 153 More specific information on configuring the driver is in 154 <file:Documentation/networking/device_drivers/ethernet/intel/ixgb.rst>. 155 156 To compile this driver as a module, choose M here. The module 157 will be called ixgb. 158 159config IXGBE 160 tristate "Intel(R) 10GbE PCI Express adapters support" 161 depends on PCI 162 depends on PTP_1588_CLOCK_OPTIONAL 163 select MDIO 164 select PHYLIB 165 help 166 This driver supports Intel(R) 10GbE PCI Express family of 167 adapters. For more information on how to identify your adapter, go 168 to the Adapter & Driver ID Guide that can be located at: 169 170 <http://support.intel.com> 171 172 More specific information on configuring the driver is in 173 <file:Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst>. 174 175 To compile this driver as a module, choose M here. The module 176 will be called ixgbe. 177 178config IXGBE_HWMON 179 bool "Intel(R) 10GbE PCI Express adapters HWMON support" 180 default y 181 depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m) 182 help 183 Say Y if you want to expose the thermal sensor data on some of 184 our cards, via a hwmon sysfs interface. 185 186config IXGBE_DCA 187 bool "Direct Cache Access (DCA) Support" 188 default y 189 depends on IXGBE && DCA && !(IXGBE=y && DCA=m) 190 help 191 Say Y here if you want to use Direct Cache Access (DCA) in the 192 driver. DCA is a method for warming the CPU cache before data 193 is used, with the intent of lessening the impact of cache misses. 194 195config IXGBE_DCB 196 bool "Data Center Bridging (DCB) Support" 197 default n 198 depends on IXGBE && DCB 199 help 200 Say Y here if you want to use Data Center Bridging (DCB) in the 201 driver. 202 203 If unsure, say N. 204 205config IXGBE_IPSEC 206 bool "IPSec XFRM cryptography-offload acceleration" 207 depends on IXGBE 208 depends on XFRM_OFFLOAD 209 default y 210 select XFRM_ALGO 211 help 212 Enable support for IPSec offload in ixgbe.ko 213 214config IXGBEVF 215 tristate "Intel(R) 10GbE PCI Express Virtual Function Ethernet support" 216 depends on PCI_MSI 217 help 218 This driver supports Intel(R) PCI Express virtual functions for the 219 Intel(R) ixgbe driver. For more information on how to identify your 220 adapter, go to the Adapter & Driver ID Guide that can be located at: 221 222 <http://support.intel.com> 223 224 More specific information on configuring the driver is in 225 <file:Documentation/networking/device_drivers/ethernet/intel/ixgbevf.rst>. 226 227 To compile this driver as a module, choose M here. The module 228 will be called ixgbevf. MSI-X interrupt support is required 229 for this driver to work correctly. 230 231config IXGBEVF_IPSEC 232 bool "IPSec XFRM cryptography-offload acceleration" 233 depends on IXGBEVF 234 depends on XFRM_OFFLOAD 235 default y 236 select XFRM_ALGO 237 help 238 Enable support for IPSec offload in ixgbevf.ko 239 240config I40E 241 tristate "Intel(R) Ethernet Controller XL710 Family support" 242 depends on PTP_1588_CLOCK_OPTIONAL 243 depends on PCI 244 select AUXILIARY_BUS 245 help 246 This driver supports Intel(R) Ethernet Controller XL710 Family of 247 devices. For more information on how to identify your adapter, go 248 to the Adapter & Driver ID Guide that can be located at: 249 250 <http://support.intel.com> 251 252 More specific information on configuring the driver is in 253 <file:Documentation/networking/device_drivers/ethernet/intel/i40e.rst>. 254 255 To compile this driver as a module, choose M here. The module 256 will be called i40e. 257 258config I40E_DCB 259 bool "Data Center Bridging (DCB) Support" 260 default n 261 depends on I40E && DCB 262 help 263 Say Y here if you want to use Data Center Bridging (DCB) in the 264 driver. 265 266 If unsure, say N. 267 268# this is here to allow seamless migration from I40EVF --> IAVF name 269# so that CONFIG_IAVF symbol will always mirror the state of CONFIG_I40EVF 270config IAVF 271 tristate 272config I40EVF 273 tristate "Intel(R) Ethernet Adaptive Virtual Function support" 274 select IAVF 275 depends on PCI_MSI 276 help 277 This driver supports virtual functions for Intel XL710, 278 X710, X722, XXV710, and all devices advertising support for 279 Intel Ethernet Adaptive Virtual Function devices. For more 280 information on how to identify your adapter, go to the Adapter 281 & Driver ID Guide that can be located at: 282 283 <https://support.intel.com> 284 285 This driver was formerly named i40evf. 286 287 More specific information on configuring the driver is in 288 <file:Documentation/networking/device_drivers/ethernet/intel/iavf.rst>. 289 290 To compile this driver as a module, choose M here. The module 291 will be called iavf. MSI-X interrupt support is required 292 for this driver to work correctly. 293 294config ICE 295 tristate "Intel(R) Ethernet Connection E800 Series Support" 296 default n 297 depends on PCI_MSI 298 depends on PTP_1588_CLOCK_OPTIONAL 299 select AUXILIARY_BUS 300 select DIMLIB 301 select NET_DEVLINK 302 select PLDMFW 303 help 304 This driver supports Intel(R) Ethernet Connection E800 Series of 305 devices. For more information on how to identify your adapter, go 306 to the Adapter & Driver ID Guide that can be located at: 307 308 <http://support.intel.com> 309 310 More specific information on configuring the driver is in 311 <file:Documentation/networking/device_drivers/ethernet/intel/ice.rst>. 312 313 To compile this driver as a module, choose M here. The module 314 will be called ice. 315 316config FM10K 317 tristate "Intel(R) FM10000 Ethernet Switch Host Interface Support" 318 default n 319 depends on PCI_MSI 320 depends on PTP_1588_CLOCK_OPTIONAL 321 help 322 This driver supports Intel(R) FM10000 Ethernet Switch Host 323 Interface. For more information on how to identify your adapter, 324 go to the Adapter & Driver ID Guide that can be located at: 325 326 <http://support.intel.com> 327 328 More specific information on configuring the driver is in 329 <file:Documentation/networking/device_drivers/ethernet/intel/fm10k.rst>. 330 331 To compile this driver as a module, choose M here. The module 332 will be called fm10k. MSI-X interrupt support is required 333 334config IGC 335 tristate "Intel(R) Ethernet Controller I225-LM/I225-V support" 336 default n 337 depends on PCI 338 depends on PTP_1588_CLOCK_OPTIONAL 339 help 340 This driver supports Intel(R) Ethernet Controller I225-LM/I225-V 341 family of adapters. 342 343 For more information on how to identify your adapter, go 344 to the Adapter & Driver ID Guide that can be located at: 345 346 <http://support.intel.com> 347 348 To compile this driver as a module, choose M here. The module 349 will be called igc. 350 351endif # NET_VENDOR_INTEL 352