xref: /openbmc/linux/drivers/net/ethernet/ibm/emac/core.h (revision ccb01374)
1 /*
2  * drivers/net/ethernet/ibm/emac/core.h
3  *
4  * Driver for PowerPC 4xx on-chip ethernet controller.
5  *
6  * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
7  *                <benh@kernel.crashing.org>
8  *
9  * Based on the arch/ppc version of the driver:
10  *
11  * Copyright (c) 2004, 2005 Zultys Technologies.
12  * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
13  *
14  * Based on original work by
15  *      Armin Kuster <akuster@mvista.com>
16  * 	Johnnie Peters <jpeters@mvista.com>
17  *      Copyright 2000, 2001 MontaVista Softare Inc.
18  *
19  * This program is free software; you can redistribute  it and/or modify it
20  * under  the terms of  the GNU General  Public License as published by the
21  * Free Software Foundation;  either version 2 of the  License, or (at your
22  * option) any later version.
23  *
24  */
25 #ifndef __IBM_NEWEMAC_CORE_H
26 #define __IBM_NEWEMAC_CORE_H
27 
28 #include <linux/module.h>
29 #include <linux/list.h>
30 #include <linux/kernel.h>
31 #include <linux/interrupt.h>
32 #include <linux/netdevice.h>
33 #include <linux/dma-mapping.h>
34 #include <linux/spinlock.h>
35 #include <linux/of_platform.h>
36 #include <linux/slab.h>
37 
38 #include <asm/io.h>
39 #include <asm/dcr.h>
40 
41 #include "emac.h"
42 #include "phy.h"
43 #include "zmii.h"
44 #include "rgmii.h"
45 #include "mal.h"
46 #include "tah.h"
47 #include "debug.h"
48 
49 #define NUM_TX_BUFF			CONFIG_IBM_EMAC_TXB
50 #define NUM_RX_BUFF			CONFIG_IBM_EMAC_RXB
51 
52 /* Simple sanity check */
53 #if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256
54 #error Invalid number of buffer descriptors (greater than 256)
55 #endif
56 
57 #define EMAC_MIN_MTU			46
58 
59 /* Maximum L2 header length (VLAN tagged, no FCS) */
60 #define EMAC_MTU_OVERHEAD		(6 * 2 + 2 + 4)
61 
62 /* RX BD size for the given MTU */
63 static inline int emac_rx_size(int mtu)
64 {
65 	if (mtu > ETH_DATA_LEN)
66 		return MAL_MAX_RX_SIZE;
67 	else
68 		return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD);
69 }
70 
71 #define EMAC_DMA_ALIGN(x)		ALIGN((x), dma_get_cache_alignment())
72 
73 #define EMAC_RX_SKB_HEADROOM		\
74 	EMAC_DMA_ALIGN(CONFIG_IBM_EMAC_RX_SKB_HEADROOM)
75 
76 /* Size of RX skb for the given MTU */
77 static inline int emac_rx_skb_size(int mtu)
78 {
79 	int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu));
80 	return EMAC_DMA_ALIGN(size + 2) + EMAC_RX_SKB_HEADROOM;
81 }
82 
83 /* RX DMA sync size */
84 static inline int emac_rx_sync_size(int mtu)
85 {
86 	return EMAC_DMA_ALIGN(emac_rx_size(mtu) + 2);
87 }
88 
89 /* Driver statistcs is split into two parts to make it more cache friendly:
90  *   - normal statistics (packet count, etc)
91  *   - error statistics
92  *
93  * When statistics is requested by ethtool, these parts are concatenated,
94  * normal one goes first.
95  *
96  * Please, keep these structures in sync with emac_stats_keys.
97  */
98 
99 /* Normal TX/RX Statistics */
100 struct emac_stats {
101 	u64 rx_packets;
102 	u64 rx_bytes;
103 	u64 tx_packets;
104 	u64 tx_bytes;
105 	u64 rx_packets_csum;
106 	u64 tx_packets_csum;
107 };
108 
109 /* Error statistics */
110 struct emac_error_stats {
111 	u64 tx_undo;
112 
113 	/* Software RX Errors */
114 	u64 rx_dropped_stack;
115 	u64 rx_dropped_oom;
116 	u64 rx_dropped_error;
117 	u64 rx_dropped_resize;
118 	u64 rx_dropped_mtu;
119 	u64 rx_stopped;
120 	/* BD reported RX errors */
121 	u64 rx_bd_errors;
122 	u64 rx_bd_overrun;
123 	u64 rx_bd_bad_packet;
124 	u64 rx_bd_runt_packet;
125 	u64 rx_bd_short_event;
126 	u64 rx_bd_alignment_error;
127 	u64 rx_bd_bad_fcs;
128 	u64 rx_bd_packet_too_long;
129 	u64 rx_bd_out_of_range;
130 	u64 rx_bd_in_range;
131 	/* EMAC IRQ reported RX errors */
132 	u64 rx_parity;
133 	u64 rx_fifo_overrun;
134 	u64 rx_overrun;
135 	u64 rx_bad_packet;
136 	u64 rx_runt_packet;
137 	u64 rx_short_event;
138 	u64 rx_alignment_error;
139 	u64 rx_bad_fcs;
140 	u64 rx_packet_too_long;
141 	u64 rx_out_of_range;
142 	u64 rx_in_range;
143 
144 	/* Software TX Errors */
145 	u64 tx_dropped;
146 	/* BD reported TX errors */
147 	u64 tx_bd_errors;
148 	u64 tx_bd_bad_fcs;
149 	u64 tx_bd_carrier_loss;
150 	u64 tx_bd_excessive_deferral;
151 	u64 tx_bd_excessive_collisions;
152 	u64 tx_bd_late_collision;
153 	u64 tx_bd_multple_collisions;
154 	u64 tx_bd_single_collision;
155 	u64 tx_bd_underrun;
156 	u64 tx_bd_sqe;
157 	/* EMAC IRQ reported TX errors */
158 	u64 tx_parity;
159 	u64 tx_underrun;
160 	u64 tx_sqe;
161 	u64 tx_errors;
162 };
163 
164 #define EMAC_ETHTOOL_STATS_COUNT	((sizeof(struct emac_stats) + \
165 					  sizeof(struct emac_error_stats)) \
166 					 / sizeof(u64))
167 
168 struct emac_instance {
169 	struct net_device		*ndev;
170 	struct emac_regs		__iomem *emacp;
171 	struct platform_device		*ofdev;
172 	struct device_node		**blist; /* bootlist entry */
173 
174 	/* MAL linkage */
175 	u32				mal_ph;
176 	struct platform_device		*mal_dev;
177 	u32				mal_rx_chan;
178 	u32				mal_tx_chan;
179 	struct mal_instance		*mal;
180 	struct mal_commac		commac;
181 
182 	/* PHY infos */
183 	int				phy_mode;
184 	u32				phy_map;
185 	u32				phy_address;
186 	u32				phy_feat_exc;
187 	struct mii_phy			phy;
188 	struct mutex			link_lock;
189 	struct delayed_work		link_work;
190 	int				link_polling;
191 
192 	/* GPCS PHY infos */
193 	u32				gpcs_address;
194 
195 	/* Shared MDIO if any */
196 	u32				mdio_ph;
197 	struct platform_device		*mdio_dev;
198 	struct emac_instance		*mdio_instance;
199 	struct mutex			mdio_lock;
200 
201 	/* Device-tree based phy configuration */
202 	struct mii_bus			*mii_bus;
203 	struct phy_device		*phy_dev;
204 
205 	/* ZMII infos if any */
206 	u32				zmii_ph;
207 	u32				zmii_port;
208 	struct platform_device		*zmii_dev;
209 
210 	/* RGMII infos if any */
211 	u32				rgmii_ph;
212 	u32				rgmii_port;
213 	struct platform_device		*rgmii_dev;
214 
215 	/* TAH infos if any */
216 	u32				tah_ph;
217 	u32				tah_port;
218 	struct platform_device		*tah_dev;
219 
220 	/* IRQs */
221 	int				wol_irq;
222 	int				emac_irq;
223 
224 	/* OPB bus frequency in Mhz */
225 	u32				opb_bus_freq;
226 
227 	/* Cell index within an ASIC (for clk mgmnt) */
228 	u32				cell_index;
229 
230 	/* Max supported MTU */
231 	u32				max_mtu;
232 
233 	/* Feature bits (from probe table) */
234 	unsigned int			features;
235 
236 	/* Tx and Rx fifo sizes & other infos in bytes */
237 	u32				tx_fifo_size;
238 	u32				tx_fifo_size_gige;
239 	u32				rx_fifo_size;
240 	u32				rx_fifo_size_gige;
241 	u32				fifo_entry_size;
242 	u32				mal_burst_size; /* move to MAL ? */
243 
244 	/* IAHT and GAHT filter parameterization */
245 	u32				xaht_slots_shift;
246 	u32				xaht_width_shift;
247 
248 	/* Descriptor management
249 	 */
250 	struct mal_descriptor		*tx_desc;
251 	int				tx_cnt;
252 	int				tx_slot;
253 	int				ack_slot;
254 
255 	struct mal_descriptor		*rx_desc;
256 	int				rx_slot;
257 	struct sk_buff			*rx_sg_skb;	/* 1 */
258 	int 				rx_skb_size;
259 	int				rx_sync_size;
260 
261 	struct sk_buff			*tx_skb[NUM_TX_BUFF];
262 	struct sk_buff			*rx_skb[NUM_RX_BUFF];
263 
264 	/* Stats
265 	 */
266 	struct emac_error_stats		estats;
267 	struct emac_stats 		stats;
268 
269 	/* Misc
270 	 */
271 	int				reset_failed;
272 	int				stop_timeout;	/* in us */
273 	int				no_mcast;
274 	int				mcast_pending;
275 	int				opened;
276 	struct work_struct		reset_work;
277 	spinlock_t			lock;
278 };
279 
280 /*
281  * Features of various EMAC implementations
282  */
283 
284 /*
285  * No flow control on 40x according to the original driver
286  */
287 #define EMAC_FTR_NO_FLOW_CONTROL_40x	0x00000001
288 /*
289  * Cell is an EMAC4
290  */
291 #define EMAC_FTR_EMAC4			0x00000002
292 /*
293  * For the 440SPe, AMCC inexplicably changed the polarity of
294  * the "operation complete" bit in the MII control register.
295  */
296 #define EMAC_FTR_STACR_OC_INVERT	0x00000004
297 /*
298  * Set if we have a TAH.
299  */
300 #define EMAC_FTR_HAS_TAH		0x00000008
301 /*
302  * Set if we have a ZMII.
303  */
304 #define EMAC_FTR_HAS_ZMII		0x00000010
305 /*
306  * Set if we have a RGMII.
307  */
308 #define EMAC_FTR_HAS_RGMII		0x00000020
309 /*
310  * Set if we have new type STACR with STAOPC
311  */
312 #define EMAC_FTR_HAS_NEW_STACR		0x00000040
313 /*
314  * Set if we need phy clock workaround for 440gx
315  */
316 #define EMAC_FTR_440GX_PHY_CLK_FIX	0x00000080
317 /*
318  * Set if we need phy clock workaround for 440ep or 440gr
319  */
320 #define EMAC_FTR_440EP_PHY_CLK_FIX	0x00000100
321 /*
322  * The 405EX and 460EX contain the EMAC4SYNC core
323  */
324 #define EMAC_FTR_EMAC4SYNC		0x00000200
325 /*
326  * Set if we need phy clock workaround for 460ex or 460gt
327  */
328 #define EMAC_FTR_460EX_PHY_CLK_FIX	0x00000400
329 /*
330  * APM821xx requires Jumbo frame size set explicitly
331  */
332 #define EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE	0x00000800
333 /*
334  * APM821xx does not support Half Duplex mode
335  */
336 #define EMAC_FTR_APM821XX_NO_HALF_DUPLEX	0x00001000
337 
338 /* Right now, we don't quite handle the always/possible masks on the
339  * most optimal way as we don't have a way to say something like
340  * always EMAC4. Patches welcome.
341  */
342 enum {
343 	EMAC_FTRS_ALWAYS	= 0,
344 
345 	EMAC_FTRS_POSSIBLE	=
346 #ifdef CONFIG_IBM_EMAC_EMAC4
347 	    EMAC_FTR_EMAC4	| EMAC_FTR_EMAC4SYNC	|
348 	    EMAC_FTR_HAS_NEW_STACR	|
349 	    EMAC_FTR_STACR_OC_INVERT | EMAC_FTR_440GX_PHY_CLK_FIX |
350 #endif
351 #ifdef CONFIG_IBM_EMAC_TAH
352 	    EMAC_FTR_HAS_TAH	|
353 #endif
354 #ifdef CONFIG_IBM_EMAC_ZMII
355 	    EMAC_FTR_HAS_ZMII	|
356 #endif
357 #ifdef CONFIG_IBM_EMAC_RGMII
358 	    EMAC_FTR_HAS_RGMII	|
359 #endif
360 #ifdef CONFIG_IBM_EMAC_NO_FLOW_CTRL
361 	    EMAC_FTR_NO_FLOW_CONTROL_40x |
362 #endif
363 	EMAC_FTR_460EX_PHY_CLK_FIX |
364 	EMAC_FTR_440EP_PHY_CLK_FIX |
365 	EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE |
366 	EMAC_FTR_APM821XX_NO_HALF_DUPLEX,
367 };
368 
369 static inline int emac_has_feature(struct emac_instance *dev,
370 				   unsigned long feature)
371 {
372 	return (EMAC_FTRS_ALWAYS & feature) ||
373 	       (EMAC_FTRS_POSSIBLE & dev->features & feature);
374 }
375 
376 /*
377  * Various instances of the EMAC core have varying 1) number of
378  * address match slots, 2) width of the registers for handling address
379  * match slots, 3) number of registers for handling address match
380  * slots and 4) base offset for those registers.
381  *
382  * These macros and inlines handle these differences based on
383  * parameters supplied by the device structure which are, in turn,
384  * initialized based on the "compatible" entry in the device tree.
385  */
386 
387 #define	EMAC4_XAHT_SLOTS_SHIFT		6
388 #define	EMAC4_XAHT_WIDTH_SHIFT		4
389 
390 #define	EMAC4SYNC_XAHT_SLOTS_SHIFT	8
391 #define	EMAC4SYNC_XAHT_WIDTH_SHIFT	5
392 
393 /* The largest span between slots and widths above is 3 */
394 #define	EMAC_XAHT_MAX_REGS		(1 << 3)
395 
396 #define	EMAC_XAHT_SLOTS(dev)         	(1 << (dev)->xaht_slots_shift)
397 #define	EMAC_XAHT_WIDTH(dev)         	(1 << (dev)->xaht_width_shift)
398 #define	EMAC_XAHT_REGS(dev)          	(1 << ((dev)->xaht_slots_shift - \
399 					       (dev)->xaht_width_shift))
400 
401 #define	EMAC_XAHT_CRC_TO_SLOT(dev, crc)			\
402 	((EMAC_XAHT_SLOTS(dev) - 1) -			\
403 	 ((crc) >> ((sizeof (u32) * BITS_PER_BYTE) -	\
404 		    (dev)->xaht_slots_shift)))
405 
406 #define	EMAC_XAHT_SLOT_TO_REG(dev, slot)		\
407 	((slot) >> (dev)->xaht_width_shift)
408 
409 #define	EMAC_XAHT_SLOT_TO_MASK(dev, slot)		\
410 	((u32)(1 << (EMAC_XAHT_WIDTH(dev) - 1)) >>	\
411 	 ((slot) & (u32)(EMAC_XAHT_WIDTH(dev) - 1)))
412 
413 static inline u32 *emac_xaht_base(struct emac_instance *dev)
414 {
415 	struct emac_regs __iomem *p = dev->emacp;
416 	int offset;
417 
418 	/* The first IAHT entry always is the base of the block of
419 	 * IAHT and GAHT registers.
420 	 */
421 	if (emac_has_feature(dev, EMAC_FTR_EMAC4SYNC))
422 		offset = offsetof(struct emac_regs, u1.emac4sync.iaht1);
423 	else
424 		offset = offsetof(struct emac_regs, u0.emac4.iaht1);
425 
426 	return (u32 *)((ptrdiff_t)p + offset);
427 }
428 
429 static inline u32 *emac_gaht_base(struct emac_instance *dev)
430 {
431 	/* GAHT registers always come after an identical number of
432 	 * IAHT registers.
433 	 */
434 	return emac_xaht_base(dev) + EMAC_XAHT_REGS(dev);
435 }
436 
437 static inline u32 *emac_iaht_base(struct emac_instance *dev)
438 {
439 	/* IAHT registers always come before an identical number of
440 	 * GAHT registers.
441 	 */
442 	return emac_xaht_base(dev);
443 }
444 
445 /* Ethtool get_regs complex data.
446  * We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH
447  * when available.
448  *
449  * Returned BLOB consists of the ibm_emac_ethtool_regs_hdr,
450  * MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers.
451  * Each register component is preceded with emac_ethtool_regs_subhdr.
452  * Order of the optional headers follows their relative bit posititions
453  * in emac_ethtool_regs_hdr.components
454  */
455 #define EMAC_ETHTOOL_REGS_ZMII		0x00000001
456 #define EMAC_ETHTOOL_REGS_RGMII		0x00000002
457 #define EMAC_ETHTOOL_REGS_TAH		0x00000004
458 
459 struct emac_ethtool_regs_hdr {
460 	u32 components;
461 };
462 
463 struct emac_ethtool_regs_subhdr {
464 	u32 version;
465 	u32 index;
466 };
467 
468 #define EMAC_ETHTOOL_REGS_VER		3
469 #define EMAC4_ETHTOOL_REGS_VER		4
470 #define EMAC4SYNC_ETHTOOL_REGS_VER	5
471 
472 #endif /* __IBM_NEWEMAC_CORE_H */
473