xref: /openbmc/linux/drivers/net/ethernet/ibm/emac/core.h (revision 62e7ca52)
1 /*
2  * drivers/net/ethernet/ibm/emac/core.h
3  *
4  * Driver for PowerPC 4xx on-chip ethernet controller.
5  *
6  * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
7  *                <benh@kernel.crashing.org>
8  *
9  * Based on the arch/ppc version of the driver:
10  *
11  * Copyright (c) 2004, 2005 Zultys Technologies.
12  * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
13  *
14  * Based on original work by
15  *      Armin Kuster <akuster@mvista.com>
16  * 	Johnnie Peters <jpeters@mvista.com>
17  *      Copyright 2000, 2001 MontaVista Softare Inc.
18  *
19  * This program is free software; you can redistribute  it and/or modify it
20  * under  the terms of  the GNU General  Public License as published by the
21  * Free Software Foundation;  either version 2 of the  License, or (at your
22  * option) any later version.
23  *
24  */
25 #ifndef __IBM_NEWEMAC_CORE_H
26 #define __IBM_NEWEMAC_CORE_H
27 
28 #include <linux/module.h>
29 #include <linux/list.h>
30 #include <linux/kernel.h>
31 #include <linux/interrupt.h>
32 #include <linux/netdevice.h>
33 #include <linux/dma-mapping.h>
34 #include <linux/spinlock.h>
35 #include <linux/of_platform.h>
36 #include <linux/slab.h>
37 
38 #include <asm/io.h>
39 #include <asm/dcr.h>
40 
41 #include "emac.h"
42 #include "phy.h"
43 #include "zmii.h"
44 #include "rgmii.h"
45 #include "mal.h"
46 #include "tah.h"
47 #include "debug.h"
48 
49 #define NUM_TX_BUFF			CONFIG_IBM_EMAC_TXB
50 #define NUM_RX_BUFF			CONFIG_IBM_EMAC_RXB
51 
52 /* Simple sanity check */
53 #if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256
54 #error Invalid number of buffer descriptors (greater than 256)
55 #endif
56 
57 #define EMAC_MIN_MTU			46
58 
59 /* Maximum L2 header length (VLAN tagged, no FCS) */
60 #define EMAC_MTU_OVERHEAD		(6 * 2 + 2 + 4)
61 
62 /* RX BD size for the given MTU */
63 static inline int emac_rx_size(int mtu)
64 {
65 	if (mtu > ETH_DATA_LEN)
66 		return MAL_MAX_RX_SIZE;
67 	else
68 		return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD);
69 }
70 
71 #define EMAC_DMA_ALIGN(x)		ALIGN((x), dma_get_cache_alignment())
72 
73 #define EMAC_RX_SKB_HEADROOM		\
74 	EMAC_DMA_ALIGN(CONFIG_IBM_EMAC_RX_SKB_HEADROOM)
75 
76 /* Size of RX skb for the given MTU */
77 static inline int emac_rx_skb_size(int mtu)
78 {
79 	int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu));
80 	return EMAC_DMA_ALIGN(size + 2) + EMAC_RX_SKB_HEADROOM;
81 }
82 
83 /* RX DMA sync size */
84 static inline int emac_rx_sync_size(int mtu)
85 {
86 	return EMAC_DMA_ALIGN(emac_rx_size(mtu) + 2);
87 }
88 
89 /* Driver statistcs is split into two parts to make it more cache friendly:
90  *   - normal statistics (packet count, etc)
91  *   - error statistics
92  *
93  * When statistics is requested by ethtool, these parts are concatenated,
94  * normal one goes first.
95  *
96  * Please, keep these structures in sync with emac_stats_keys.
97  */
98 
99 /* Normal TX/RX Statistics */
100 struct emac_stats {
101 	u64 rx_packets;
102 	u64 rx_bytes;
103 	u64 tx_packets;
104 	u64 tx_bytes;
105 	u64 rx_packets_csum;
106 	u64 tx_packets_csum;
107 };
108 
109 /* Error statistics */
110 struct emac_error_stats {
111 	u64 tx_undo;
112 
113 	/* Software RX Errors */
114 	u64 rx_dropped_stack;
115 	u64 rx_dropped_oom;
116 	u64 rx_dropped_error;
117 	u64 rx_dropped_resize;
118 	u64 rx_dropped_mtu;
119 	u64 rx_stopped;
120 	/* BD reported RX errors */
121 	u64 rx_bd_errors;
122 	u64 rx_bd_overrun;
123 	u64 rx_bd_bad_packet;
124 	u64 rx_bd_runt_packet;
125 	u64 rx_bd_short_event;
126 	u64 rx_bd_alignment_error;
127 	u64 rx_bd_bad_fcs;
128 	u64 rx_bd_packet_too_long;
129 	u64 rx_bd_out_of_range;
130 	u64 rx_bd_in_range;
131 	/* EMAC IRQ reported RX errors */
132 	u64 rx_parity;
133 	u64 rx_fifo_overrun;
134 	u64 rx_overrun;
135 	u64 rx_bad_packet;
136 	u64 rx_runt_packet;
137 	u64 rx_short_event;
138 	u64 rx_alignment_error;
139 	u64 rx_bad_fcs;
140 	u64 rx_packet_too_long;
141 	u64 rx_out_of_range;
142 	u64 rx_in_range;
143 
144 	/* Software TX Errors */
145 	u64 tx_dropped;
146 	/* BD reported TX errors */
147 	u64 tx_bd_errors;
148 	u64 tx_bd_bad_fcs;
149 	u64 tx_bd_carrier_loss;
150 	u64 tx_bd_excessive_deferral;
151 	u64 tx_bd_excessive_collisions;
152 	u64 tx_bd_late_collision;
153 	u64 tx_bd_multple_collisions;
154 	u64 tx_bd_single_collision;
155 	u64 tx_bd_underrun;
156 	u64 tx_bd_sqe;
157 	/* EMAC IRQ reported TX errors */
158 	u64 tx_parity;
159 	u64 tx_underrun;
160 	u64 tx_sqe;
161 	u64 tx_errors;
162 };
163 
164 #define EMAC_ETHTOOL_STATS_COUNT	((sizeof(struct emac_stats) + \
165 					  sizeof(struct emac_error_stats)) \
166 					 / sizeof(u64))
167 
168 struct emac_instance {
169 	struct net_device		*ndev;
170 	struct resource			rsrc_regs;
171 	struct emac_regs		__iomem *emacp;
172 	struct platform_device		*ofdev;
173 	struct device_node		**blist; /* bootlist entry */
174 
175 	/* MAL linkage */
176 	u32				mal_ph;
177 	struct platform_device		*mal_dev;
178 	u32				mal_rx_chan;
179 	u32				mal_tx_chan;
180 	struct mal_instance		*mal;
181 	struct mal_commac		commac;
182 
183 	/* PHY infos */
184 	u32				phy_mode;
185 	u32				phy_map;
186 	u32				phy_address;
187 	u32				phy_feat_exc;
188 	struct mii_phy			phy;
189 	struct mutex			link_lock;
190 	struct delayed_work		link_work;
191 	int				link_polling;
192 
193 	/* GPCS PHY infos */
194 	u32				gpcs_address;
195 
196 	/* Shared MDIO if any */
197 	u32				mdio_ph;
198 	struct platform_device		*mdio_dev;
199 	struct emac_instance		*mdio_instance;
200 	struct mutex			mdio_lock;
201 
202 	/* ZMII infos if any */
203 	u32				zmii_ph;
204 	u32				zmii_port;
205 	struct platform_device		*zmii_dev;
206 
207 	/* RGMII infos if any */
208 	u32				rgmii_ph;
209 	u32				rgmii_port;
210 	struct platform_device		*rgmii_dev;
211 
212 	/* TAH infos if any */
213 	u32				tah_ph;
214 	u32				tah_port;
215 	struct platform_device		*tah_dev;
216 
217 	/* IRQs */
218 	int				wol_irq;
219 	int				emac_irq;
220 
221 	/* OPB bus frequency in Mhz */
222 	u32				opb_bus_freq;
223 
224 	/* Cell index within an ASIC (for clk mgmnt) */
225 	u32				cell_index;
226 
227 	/* Max supported MTU */
228 	u32				max_mtu;
229 
230 	/* Feature bits (from probe table) */
231 	unsigned int			features;
232 
233 	/* Tx and Rx fifo sizes & other infos in bytes */
234 	u32				tx_fifo_size;
235 	u32				tx_fifo_size_gige;
236 	u32				rx_fifo_size;
237 	u32				rx_fifo_size_gige;
238 	u32				fifo_entry_size;
239 	u32				mal_burst_size; /* move to MAL ? */
240 
241 	/* IAHT and GAHT filter parameterization */
242 	u32				xaht_slots_shift;
243 	u32				xaht_width_shift;
244 
245 	/* Descriptor management
246 	 */
247 	struct mal_descriptor		*tx_desc;
248 	int				tx_cnt;
249 	int				tx_slot;
250 	int				ack_slot;
251 
252 	struct mal_descriptor		*rx_desc;
253 	int				rx_slot;
254 	struct sk_buff			*rx_sg_skb;	/* 1 */
255 	int 				rx_skb_size;
256 	int				rx_sync_size;
257 
258 	struct sk_buff			*tx_skb[NUM_TX_BUFF];
259 	struct sk_buff			*rx_skb[NUM_RX_BUFF];
260 
261 	/* Stats
262 	 */
263 	struct emac_error_stats		estats;
264 	struct net_device_stats		nstats;
265 	struct emac_stats 		stats;
266 
267 	/* Misc
268 	 */
269 	int				reset_failed;
270 	int				stop_timeout;	/* in us */
271 	int				no_mcast;
272 	int				mcast_pending;
273 	int				opened;
274 	struct work_struct		reset_work;
275 	spinlock_t			lock;
276 };
277 
278 /*
279  * Features of various EMAC implementations
280  */
281 
282 /*
283  * No flow control on 40x according to the original driver
284  */
285 #define EMAC_FTR_NO_FLOW_CONTROL_40x	0x00000001
286 /*
287  * Cell is an EMAC4
288  */
289 #define EMAC_FTR_EMAC4			0x00000002
290 /*
291  * For the 440SPe, AMCC inexplicably changed the polarity of
292  * the "operation complete" bit in the MII control register.
293  */
294 #define EMAC_FTR_STACR_OC_INVERT	0x00000004
295 /*
296  * Set if we have a TAH.
297  */
298 #define EMAC_FTR_HAS_TAH		0x00000008
299 /*
300  * Set if we have a ZMII.
301  */
302 #define EMAC_FTR_HAS_ZMII		0x00000010
303 /*
304  * Set if we have a RGMII.
305  */
306 #define EMAC_FTR_HAS_RGMII		0x00000020
307 /*
308  * Set if we have new type STACR with STAOPC
309  */
310 #define EMAC_FTR_HAS_NEW_STACR		0x00000040
311 /*
312  * Set if we need phy clock workaround for 440gx
313  */
314 #define EMAC_FTR_440GX_PHY_CLK_FIX	0x00000080
315 /*
316  * Set if we need phy clock workaround for 440ep or 440gr
317  */
318 #define EMAC_FTR_440EP_PHY_CLK_FIX	0x00000100
319 /*
320  * The 405EX and 460EX contain the EMAC4SYNC core
321  */
322 #define EMAC_FTR_EMAC4SYNC		0x00000200
323 /*
324  * Set if we need phy clock workaround for 460ex or 460gt
325  */
326 #define EMAC_FTR_460EX_PHY_CLK_FIX	0x00000400
327 /*
328  * APM821xx requires Jumbo frame size set explicitly
329  */
330 #define EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE	0x00000800
331 /*
332  * APM821xx does not support Half Duplex mode
333  */
334 #define EMAC_FTR_APM821XX_NO_HALF_DUPLEX	0x00001000
335 
336 /* Right now, we don't quite handle the always/possible masks on the
337  * most optimal way as we don't have a way to say something like
338  * always EMAC4. Patches welcome.
339  */
340 enum {
341 	EMAC_FTRS_ALWAYS	= 0,
342 
343 	EMAC_FTRS_POSSIBLE	=
344 #ifdef CONFIG_IBM_EMAC_EMAC4
345 	    EMAC_FTR_EMAC4	| EMAC_FTR_EMAC4SYNC	|
346 	    EMAC_FTR_HAS_NEW_STACR	|
347 	    EMAC_FTR_STACR_OC_INVERT | EMAC_FTR_440GX_PHY_CLK_FIX |
348 #endif
349 #ifdef CONFIG_IBM_EMAC_TAH
350 	    EMAC_FTR_HAS_TAH	|
351 #endif
352 #ifdef CONFIG_IBM_EMAC_ZMII
353 	    EMAC_FTR_HAS_ZMII	|
354 #endif
355 #ifdef CONFIG_IBM_EMAC_RGMII
356 	    EMAC_FTR_HAS_RGMII	|
357 #endif
358 #ifdef CONFIG_IBM_EMAC_NO_FLOW_CTRL
359 	    EMAC_FTR_NO_FLOW_CONTROL_40x |
360 #endif
361 	EMAC_FTR_460EX_PHY_CLK_FIX |
362 	EMAC_FTR_440EP_PHY_CLK_FIX |
363 	EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE |
364 	EMAC_FTR_APM821XX_NO_HALF_DUPLEX,
365 };
366 
367 static inline int emac_has_feature(struct emac_instance *dev,
368 				   unsigned long feature)
369 {
370 	return (EMAC_FTRS_ALWAYS & feature) ||
371 	       (EMAC_FTRS_POSSIBLE & dev->features & feature);
372 }
373 
374 /*
375  * Various instances of the EMAC core have varying 1) number of
376  * address match slots, 2) width of the registers for handling address
377  * match slots, 3) number of registers for handling address match
378  * slots and 4) base offset for those registers.
379  *
380  * These macros and inlines handle these differences based on
381  * parameters supplied by the device structure which are, in turn,
382  * initialized based on the "compatible" entry in the device tree.
383  */
384 
385 #define	EMAC4_XAHT_SLOTS_SHIFT		6
386 #define	EMAC4_XAHT_WIDTH_SHIFT		4
387 
388 #define	EMAC4SYNC_XAHT_SLOTS_SHIFT	8
389 #define	EMAC4SYNC_XAHT_WIDTH_SHIFT	5
390 
391 #define	EMAC_XAHT_SLOTS(dev)         	(1 << (dev)->xaht_slots_shift)
392 #define	EMAC_XAHT_WIDTH(dev)         	(1 << (dev)->xaht_width_shift)
393 #define	EMAC_XAHT_REGS(dev)          	(1 << ((dev)->xaht_slots_shift - \
394 					       (dev)->xaht_width_shift))
395 
396 #define	EMAC_XAHT_CRC_TO_SLOT(dev, crc)			\
397 	((EMAC_XAHT_SLOTS(dev) - 1) -			\
398 	 ((crc) >> ((sizeof (u32) * BITS_PER_BYTE) -	\
399 		    (dev)->xaht_slots_shift)))
400 
401 #define	EMAC_XAHT_SLOT_TO_REG(dev, slot)		\
402 	((slot) >> (dev)->xaht_width_shift)
403 
404 #define	EMAC_XAHT_SLOT_TO_MASK(dev, slot)		\
405 	((u32)(1 << (EMAC_XAHT_WIDTH(dev) - 1)) >>	\
406 	 ((slot) & (u32)(EMAC_XAHT_WIDTH(dev) - 1)))
407 
408 static inline u32 *emac_xaht_base(struct emac_instance *dev)
409 {
410 	struct emac_regs __iomem *p = dev->emacp;
411 	int offset;
412 
413 	/* The first IAHT entry always is the base of the block of
414 	 * IAHT and GAHT registers.
415 	 */
416 	if (emac_has_feature(dev, EMAC_FTR_EMAC4SYNC))
417 		offset = offsetof(struct emac_regs, u1.emac4sync.iaht1);
418 	else
419 		offset = offsetof(struct emac_regs, u0.emac4.iaht1);
420 
421 	return (u32 *)((ptrdiff_t)p + offset);
422 }
423 
424 static inline u32 *emac_gaht_base(struct emac_instance *dev)
425 {
426 	/* GAHT registers always come after an identical number of
427 	 * IAHT registers.
428 	 */
429 	return emac_xaht_base(dev) + EMAC_XAHT_REGS(dev);
430 }
431 
432 static inline u32 *emac_iaht_base(struct emac_instance *dev)
433 {
434 	/* IAHT registers always come before an identical number of
435 	 * GAHT registers.
436 	 */
437 	return emac_xaht_base(dev);
438 }
439 
440 /* Ethtool get_regs complex data.
441  * We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH
442  * when available.
443  *
444  * Returned BLOB consists of the ibm_emac_ethtool_regs_hdr,
445  * MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers.
446  * Each register component is preceded with emac_ethtool_regs_subhdr.
447  * Order of the optional headers follows their relative bit posititions
448  * in emac_ethtool_regs_hdr.components
449  */
450 #define EMAC_ETHTOOL_REGS_ZMII		0x00000001
451 #define EMAC_ETHTOOL_REGS_RGMII		0x00000002
452 #define EMAC_ETHTOOL_REGS_TAH		0x00000004
453 
454 struct emac_ethtool_regs_hdr {
455 	u32 components;
456 };
457 
458 struct emac_ethtool_regs_subhdr {
459 	u32 version;
460 	u32 index;
461 };
462 
463 #define EMAC_ETHTOOL_REGS_VER		0
464 #define EMAC_ETHTOOL_REGS_SIZE(dev) 	((dev)->rsrc_regs.end - \
465 					 (dev)->rsrc_regs.start + 1)
466 #define EMAC4_ETHTOOL_REGS_VER      	1
467 #define EMAC4_ETHTOOL_REGS_SIZE(dev)	((dev)->rsrc_regs.end -	\
468 					 (dev)->rsrc_regs.start + 1)
469 
470 #endif /* __IBM_NEWEMAC_CORE_H */
471