xref: /openbmc/linux/drivers/net/ethernet/ibm/emac/core.h (revision 46a73e9e)
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  * drivers/net/ethernet/ibm/emac/core.h
4  *
5  * Driver for PowerPC 4xx on-chip ethernet controller.
6  *
7  * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
8  *                <benh@kernel.crashing.org>
9  *
10  * Based on the arch/ppc version of the driver:
11  *
12  * Copyright (c) 2004, 2005 Zultys Technologies.
13  * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
14  *
15  * Based on original work by
16  *      Armin Kuster <akuster@mvista.com>
17  * 	Johnnie Peters <jpeters@mvista.com>
18  *      Copyright 2000, 2001 MontaVista Softare Inc.
19  */
20 #ifndef __IBM_NEWEMAC_CORE_H
21 #define __IBM_NEWEMAC_CORE_H
22 
23 #include <linux/module.h>
24 #include <linux/list.h>
25 #include <linux/kernel.h>
26 #include <linux/interrupt.h>
27 #include <linux/netdevice.h>
28 #include <linux/dma-mapping.h>
29 #include <linux/spinlock.h>
30 #include <linux/of_platform.h>
31 #include <linux/slab.h>
32 
33 #include <asm/io.h>
34 #include <asm/dcr.h>
35 
36 #include "emac.h"
37 #include "phy.h"
38 #include "zmii.h"
39 #include "rgmii.h"
40 #include "mal.h"
41 #include "tah.h"
42 #include "debug.h"
43 
44 #define NUM_TX_BUFF			CONFIG_IBM_EMAC_TXB
45 #define NUM_RX_BUFF			CONFIG_IBM_EMAC_RXB
46 
47 /* Simple sanity check */
48 #if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256
49 #error Invalid number of buffer descriptors (greater than 256)
50 #endif
51 
52 #define EMAC_MIN_MTU			46
53 
54 /* Maximum L2 header length (VLAN tagged, no FCS) */
55 #define EMAC_MTU_OVERHEAD		(6 * 2 + 2 + 4)
56 
57 /* RX BD size for the given MTU */
58 static inline int emac_rx_size(int mtu)
59 {
60 	if (mtu > ETH_DATA_LEN)
61 		return MAL_MAX_RX_SIZE;
62 	else
63 		return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD);
64 }
65 
66 /* Size of RX skb for the given MTU */
67 static inline int emac_rx_skb_size(int mtu)
68 {
69 	int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu));
70 
71 	return SKB_DATA_ALIGN(size + NET_IP_ALIGN) + NET_SKB_PAD;
72 }
73 
74 /* RX DMA sync size */
75 static inline int emac_rx_sync_size(int mtu)
76 {
77 	return SKB_DATA_ALIGN(emac_rx_size(mtu) + NET_IP_ALIGN);
78 }
79 
80 /* Driver statistcs is split into two parts to make it more cache friendly:
81  *   - normal statistics (packet count, etc)
82  *   - error statistics
83  *
84  * When statistics is requested by ethtool, these parts are concatenated,
85  * normal one goes first.
86  *
87  * Please, keep these structures in sync with emac_stats_keys.
88  */
89 
90 /* Normal TX/RX Statistics */
91 struct emac_stats {
92 	u64 rx_packets;
93 	u64 rx_bytes;
94 	u64 tx_packets;
95 	u64 tx_bytes;
96 	u64 rx_packets_csum;
97 	u64 tx_packets_csum;
98 };
99 
100 /* Error statistics */
101 struct emac_error_stats {
102 	u64 tx_undo;
103 
104 	/* Software RX Errors */
105 	u64 rx_dropped_stack;
106 	u64 rx_dropped_oom;
107 	u64 rx_dropped_error;
108 	u64 rx_dropped_resize;
109 	u64 rx_dropped_mtu;
110 	u64 rx_stopped;
111 	/* BD reported RX errors */
112 	u64 rx_bd_errors;
113 	u64 rx_bd_overrun;
114 	u64 rx_bd_bad_packet;
115 	u64 rx_bd_runt_packet;
116 	u64 rx_bd_short_event;
117 	u64 rx_bd_alignment_error;
118 	u64 rx_bd_bad_fcs;
119 	u64 rx_bd_packet_too_long;
120 	u64 rx_bd_out_of_range;
121 	u64 rx_bd_in_range;
122 	/* EMAC IRQ reported RX errors */
123 	u64 rx_parity;
124 	u64 rx_fifo_overrun;
125 	u64 rx_overrun;
126 	u64 rx_bad_packet;
127 	u64 rx_runt_packet;
128 	u64 rx_short_event;
129 	u64 rx_alignment_error;
130 	u64 rx_bad_fcs;
131 	u64 rx_packet_too_long;
132 	u64 rx_out_of_range;
133 	u64 rx_in_range;
134 
135 	/* Software TX Errors */
136 	u64 tx_dropped;
137 	/* BD reported TX errors */
138 	u64 tx_bd_errors;
139 	u64 tx_bd_bad_fcs;
140 	u64 tx_bd_carrier_loss;
141 	u64 tx_bd_excessive_deferral;
142 	u64 tx_bd_excessive_collisions;
143 	u64 tx_bd_late_collision;
144 	u64 tx_bd_multple_collisions;
145 	u64 tx_bd_single_collision;
146 	u64 tx_bd_underrun;
147 	u64 tx_bd_sqe;
148 	/* EMAC IRQ reported TX errors */
149 	u64 tx_parity;
150 	u64 tx_underrun;
151 	u64 tx_sqe;
152 	u64 tx_errors;
153 };
154 
155 #define EMAC_ETHTOOL_STATS_COUNT	((sizeof(struct emac_stats) + \
156 					  sizeof(struct emac_error_stats)) \
157 					 / sizeof(u64))
158 
159 struct emac_instance {
160 	struct net_device		*ndev;
161 	struct emac_regs		__iomem *emacp;
162 	struct platform_device		*ofdev;
163 	struct device_node		**blist; /* bootlist entry */
164 
165 	/* MAL linkage */
166 	u32				mal_ph;
167 	struct platform_device		*mal_dev;
168 	u32				mal_rx_chan;
169 	u32				mal_tx_chan;
170 	struct mal_instance		*mal;
171 	struct mal_commac		commac;
172 
173 	/* PHY infos */
174 	int				phy_mode;
175 	u32				phy_map;
176 	u32				phy_address;
177 	u32				phy_feat_exc;
178 	struct mii_phy			phy;
179 	struct mutex			link_lock;
180 	struct delayed_work		link_work;
181 	int				link_polling;
182 
183 	/* GPCS PHY infos */
184 	u32				gpcs_address;
185 
186 	/* Shared MDIO if any */
187 	u32				mdio_ph;
188 	struct platform_device		*mdio_dev;
189 	struct emac_instance		*mdio_instance;
190 	struct mutex			mdio_lock;
191 
192 	/* Device-tree based phy configuration */
193 	struct mii_bus			*mii_bus;
194 	struct phy_device		*phy_dev;
195 
196 	/* ZMII infos if any */
197 	u32				zmii_ph;
198 	u32				zmii_port;
199 	struct platform_device		*zmii_dev;
200 
201 	/* RGMII infos if any */
202 	u32				rgmii_ph;
203 	u32				rgmii_port;
204 	struct platform_device		*rgmii_dev;
205 
206 	/* TAH infos if any */
207 	u32				tah_ph;
208 	u32				tah_port;
209 	struct platform_device		*tah_dev;
210 
211 	/* IRQs */
212 	int				wol_irq;
213 	int				emac_irq;
214 
215 	/* OPB bus frequency in Mhz */
216 	u32				opb_bus_freq;
217 
218 	/* Cell index within an ASIC (for clk mgmnt) */
219 	u32				cell_index;
220 
221 	/* Max supported MTU */
222 	u32				max_mtu;
223 
224 	/* Feature bits (from probe table) */
225 	unsigned int			features;
226 
227 	/* Tx and Rx fifo sizes & other infos in bytes */
228 	u32				tx_fifo_size;
229 	u32				tx_fifo_size_gige;
230 	u32				rx_fifo_size;
231 	u32				rx_fifo_size_gige;
232 	u32				fifo_entry_size;
233 	u32				mal_burst_size; /* move to MAL ? */
234 
235 	/* IAHT and GAHT filter parameterization */
236 	u32				xaht_slots_shift;
237 	u32				xaht_width_shift;
238 
239 	/* Descriptor management
240 	 */
241 	struct mal_descriptor		*tx_desc;
242 	int				tx_cnt;
243 	int				tx_slot;
244 	int				ack_slot;
245 
246 	struct mal_descriptor		*rx_desc;
247 	int				rx_slot;
248 	struct sk_buff			*rx_sg_skb;	/* 1 */
249 	int 				rx_skb_size;
250 	int				rx_sync_size;
251 
252 	struct sk_buff			*tx_skb[NUM_TX_BUFF];
253 	struct sk_buff			*rx_skb[NUM_RX_BUFF];
254 
255 	/* Stats
256 	 */
257 	struct emac_error_stats		estats;
258 	struct emac_stats 		stats;
259 
260 	/* Misc
261 	 */
262 	int				reset_failed;
263 	int				stop_timeout;	/* in us */
264 	int				no_mcast;
265 	int				mcast_pending;
266 	int				opened;
267 	struct work_struct		reset_work;
268 	spinlock_t			lock;
269 };
270 
271 /*
272  * Features of various EMAC implementations
273  */
274 
275 /*
276  * No flow control on 40x according to the original driver
277  */
278 #define EMAC_FTR_NO_FLOW_CONTROL_40x	0x00000001
279 /*
280  * Cell is an EMAC4
281  */
282 #define EMAC_FTR_EMAC4			0x00000002
283 /*
284  * For the 440SPe, AMCC inexplicably changed the polarity of
285  * the "operation complete" bit in the MII control register.
286  */
287 #define EMAC_FTR_STACR_OC_INVERT	0x00000004
288 /*
289  * Set if we have a TAH.
290  */
291 #define EMAC_FTR_HAS_TAH		0x00000008
292 /*
293  * Set if we have a ZMII.
294  */
295 #define EMAC_FTR_HAS_ZMII		0x00000010
296 /*
297  * Set if we have a RGMII.
298  */
299 #define EMAC_FTR_HAS_RGMII		0x00000020
300 /*
301  * Set if we have new type STACR with STAOPC
302  */
303 #define EMAC_FTR_HAS_NEW_STACR		0x00000040
304 /*
305  * Set if we need phy clock workaround for 440gx
306  */
307 #define EMAC_FTR_440GX_PHY_CLK_FIX	0x00000080
308 /*
309  * Set if we need phy clock workaround for 440ep or 440gr
310  */
311 #define EMAC_FTR_440EP_PHY_CLK_FIX	0x00000100
312 /*
313  * The 405EX and 460EX contain the EMAC4SYNC core
314  */
315 #define EMAC_FTR_EMAC4SYNC		0x00000200
316 /*
317  * Set if we need phy clock workaround for 460ex or 460gt
318  */
319 #define EMAC_FTR_460EX_PHY_CLK_FIX	0x00000400
320 /*
321  * APM821xx requires Jumbo frame size set explicitly
322  */
323 #define EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE	0x00000800
324 /*
325  * APM821xx does not support Half Duplex mode
326  */
327 #define EMAC_FTR_APM821XX_NO_HALF_DUPLEX	0x00001000
328 
329 /* Right now, we don't quite handle the always/possible masks on the
330  * most optimal way as we don't have a way to say something like
331  * always EMAC4. Patches welcome.
332  */
333 enum {
334 	EMAC_FTRS_ALWAYS	= 0,
335 
336 	EMAC_FTRS_POSSIBLE	=
337 #ifdef CONFIG_IBM_EMAC_EMAC4
338 	    EMAC_FTR_EMAC4	| EMAC_FTR_EMAC4SYNC	|
339 	    EMAC_FTR_HAS_NEW_STACR	|
340 	    EMAC_FTR_STACR_OC_INVERT | EMAC_FTR_440GX_PHY_CLK_FIX |
341 #endif
342 #ifdef CONFIG_IBM_EMAC_TAH
343 	    EMAC_FTR_HAS_TAH	|
344 #endif
345 #ifdef CONFIG_IBM_EMAC_ZMII
346 	    EMAC_FTR_HAS_ZMII	|
347 #endif
348 #ifdef CONFIG_IBM_EMAC_RGMII
349 	    EMAC_FTR_HAS_RGMII	|
350 #endif
351 #ifdef CONFIG_IBM_EMAC_NO_FLOW_CTRL
352 	    EMAC_FTR_NO_FLOW_CONTROL_40x |
353 #endif
354 	EMAC_FTR_460EX_PHY_CLK_FIX |
355 	EMAC_FTR_440EP_PHY_CLK_FIX |
356 	EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE |
357 	EMAC_FTR_APM821XX_NO_HALF_DUPLEX,
358 };
359 
360 static inline int emac_has_feature(struct emac_instance *dev,
361 				   unsigned long feature)
362 {
363 	return (EMAC_FTRS_ALWAYS & feature) ||
364 	       (EMAC_FTRS_POSSIBLE & dev->features & feature);
365 }
366 
367 /*
368  * Various instances of the EMAC core have varying 1) number of
369  * address match slots, 2) width of the registers for handling address
370  * match slots, 3) number of registers for handling address match
371  * slots and 4) base offset for those registers.
372  *
373  * These macros and inlines handle these differences based on
374  * parameters supplied by the device structure which are, in turn,
375  * initialized based on the "compatible" entry in the device tree.
376  */
377 
378 #define	EMAC4_XAHT_SLOTS_SHIFT		6
379 #define	EMAC4_XAHT_WIDTH_SHIFT		4
380 
381 #define	EMAC4SYNC_XAHT_SLOTS_SHIFT	8
382 #define	EMAC4SYNC_XAHT_WIDTH_SHIFT	5
383 
384 /* The largest span between slots and widths above is 3 */
385 #define	EMAC_XAHT_MAX_REGS		(1 << 3)
386 
387 #define	EMAC_XAHT_SLOTS(dev)         	(1 << (dev)->xaht_slots_shift)
388 #define	EMAC_XAHT_WIDTH(dev)         	(1 << (dev)->xaht_width_shift)
389 #define	EMAC_XAHT_REGS(dev)          	(1 << ((dev)->xaht_slots_shift - \
390 					       (dev)->xaht_width_shift))
391 
392 #define	EMAC_XAHT_CRC_TO_SLOT(dev, crc)			\
393 	((EMAC_XAHT_SLOTS(dev) - 1) -			\
394 	 ((crc) >> ((sizeof (u32) * BITS_PER_BYTE) -	\
395 		    (dev)->xaht_slots_shift)))
396 
397 #define	EMAC_XAHT_SLOT_TO_REG(dev, slot)		\
398 	((slot) >> (dev)->xaht_width_shift)
399 
400 #define	EMAC_XAHT_SLOT_TO_MASK(dev, slot)		\
401 	((u32)(1 << (EMAC_XAHT_WIDTH(dev) - 1)) >>	\
402 	 ((slot) & (u32)(EMAC_XAHT_WIDTH(dev) - 1)))
403 
404 static inline u32 *emac_xaht_base(struct emac_instance *dev)
405 {
406 	struct emac_regs __iomem *p = dev->emacp;
407 	int offset;
408 
409 	/* The first IAHT entry always is the base of the block of
410 	 * IAHT and GAHT registers.
411 	 */
412 	if (emac_has_feature(dev, EMAC_FTR_EMAC4SYNC))
413 		offset = offsetof(struct emac_regs, u1.emac4sync.iaht1);
414 	else
415 		offset = offsetof(struct emac_regs, u0.emac4.iaht1);
416 
417 	return (u32 *)((ptrdiff_t)p + offset);
418 }
419 
420 static inline u32 *emac_gaht_base(struct emac_instance *dev)
421 {
422 	/* GAHT registers always come after an identical number of
423 	 * IAHT registers.
424 	 */
425 	return emac_xaht_base(dev) + EMAC_XAHT_REGS(dev);
426 }
427 
428 static inline u32 *emac_iaht_base(struct emac_instance *dev)
429 {
430 	/* IAHT registers always come before an identical number of
431 	 * GAHT registers.
432 	 */
433 	return emac_xaht_base(dev);
434 }
435 
436 /* Ethtool get_regs complex data.
437  * We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH
438  * when available.
439  *
440  * Returned BLOB consists of the ibm_emac_ethtool_regs_hdr,
441  * MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers.
442  * Each register component is preceded with emac_ethtool_regs_subhdr.
443  * Order of the optional headers follows their relative bit posititions
444  * in emac_ethtool_regs_hdr.components
445  */
446 #define EMAC_ETHTOOL_REGS_ZMII		0x00000001
447 #define EMAC_ETHTOOL_REGS_RGMII		0x00000002
448 #define EMAC_ETHTOOL_REGS_TAH		0x00000004
449 
450 struct emac_ethtool_regs_hdr {
451 	u32 components;
452 };
453 
454 struct emac_ethtool_regs_subhdr {
455 	u32 version;
456 	u32 index;
457 };
458 
459 #define EMAC_ETHTOOL_REGS_VER		3
460 #define EMAC4_ETHTOOL_REGS_VER		4
461 #define EMAC4SYNC_ETHTOOL_REGS_VER	5
462 
463 #endif /* __IBM_NEWEMAC_CORE_H */
464