1 /*======================================================================
2     fmvj18x_cs.c 2.8 2002/03/23
3 
4     A fmvj18x (and its compatibles) PCMCIA client driver
5 
6     Contributed by Shingo Fujimoto, shingo@flab.fujitsu.co.jp
7 
8     TDK LAK-CD021 and CONTEC C-NET(PC)C support added by
9     Nobuhiro Katayama, kata-n@po.iijnet.or.jp
10 
11     The PCMCIA client code is based on code written by David Hinds.
12     Network code is based on the "FMV-18x driver" by Yutaka TAMIYA
13     but is actually largely Donald Becker's AT1700 driver, which
14     carries the following attribution:
15 
16     Written 1993-94 by Donald Becker.
17 
18     Copyright 1993 United States Government as represented by the
19     Director, National Security Agency.
20 
21     This software may be used and distributed according to the terms
22     of the GNU General Public License, incorporated herein by reference.
23 
24     The author may be reached as becker@scyld.com, or C/O
25     Scyld Computing Corporation
26     410 Severn Ave., Suite 210
27     Annapolis MD 21403
28 
29 ======================================================================*/
30 
31 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
32 
33 #define DRV_NAME	"fmvj18x_cs"
34 #define DRV_VERSION	"2.9"
35 
36 #include <linux/module.h>
37 #include <linux/kernel.h>
38 #include <linux/ptrace.h>
39 #include <linux/slab.h>
40 #include <linux/string.h>
41 #include <linux/timer.h>
42 #include <linux/interrupt.h>
43 #include <linux/in.h>
44 #include <linux/delay.h>
45 #include <linux/ethtool.h>
46 #include <linux/netdevice.h>
47 #include <linux/etherdevice.h>
48 #include <linux/skbuff.h>
49 #include <linux/if_arp.h>
50 #include <linux/ioport.h>
51 #include <linux/crc32.h>
52 
53 #include <pcmcia/cistpl.h>
54 #include <pcmcia/ciscode.h>
55 #include <pcmcia/ds.h>
56 
57 #include <linux/uaccess.h>
58 #include <asm/io.h>
59 
60 /*====================================================================*/
61 
62 /* Module parameters */
63 
64 MODULE_DESCRIPTION("fmvj18x and compatible PCMCIA ethernet driver");
65 MODULE_LICENSE("GPL");
66 
67 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
68 
69 /* SRAM configuration */
70 /* 0:4KB*2 TX buffer   else:8KB*2 TX buffer */
71 INT_MODULE_PARM(sram_config, 0);
72 
73 
74 /*====================================================================*/
75 /*
76     PCMCIA event handlers
77  */
78 static int fmvj18x_config(struct pcmcia_device *link);
79 static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id);
80 static int fmvj18x_setup_mfc(struct pcmcia_device *link);
81 static void fmvj18x_release(struct pcmcia_device *link);
82 static void fmvj18x_detach(struct pcmcia_device *p_dev);
83 
84 /*
85     LAN controller(MBH86960A) specific routines
86  */
87 static int fjn_config(struct net_device *dev, struct ifmap *map);
88 static int fjn_open(struct net_device *dev);
89 static int fjn_close(struct net_device *dev);
90 static netdev_tx_t fjn_start_xmit(struct sk_buff *skb,
91 					struct net_device *dev);
92 static irqreturn_t fjn_interrupt(int irq, void *dev_id);
93 static void fjn_rx(struct net_device *dev);
94 static void fjn_reset(struct net_device *dev);
95 static void set_rx_mode(struct net_device *dev);
96 static void fjn_tx_timeout(struct net_device *dev, unsigned int txqueue);
97 static const struct ethtool_ops netdev_ethtool_ops;
98 
99 /*
100     card type
101  */
102 enum cardtype { MBH10302, MBH10304, TDK, CONTEC, LA501, UNGERMANN,
103 	       XXX10304, NEC, KME
104 };
105 
106 /*
107     driver specific data structure
108 */
109 struct local_info {
110 	struct pcmcia_device	*p_dev;
111     long open_time;
112     uint tx_started:1;
113     uint tx_queue;
114     u_short tx_queue_len;
115     enum cardtype cardtype;
116     u_short sent;
117     u_char __iomem *base;
118 };
119 
120 #define MC_FILTERBREAK 64
121 
122 /*====================================================================*/
123 /*
124     ioport offset from the base address
125  */
126 #define TX_STATUS               0 /* transmit status register */
127 #define RX_STATUS               1 /* receive status register */
128 #define TX_INTR                 2 /* transmit interrupt mask register */
129 #define RX_INTR                 3 /* receive interrupt mask register */
130 #define TX_MODE                 4 /* transmit mode register */
131 #define RX_MODE                 5 /* receive mode register */
132 #define CONFIG_0                6 /* configuration register 0 */
133 #define CONFIG_1                7 /* configuration register 1 */
134 
135 #define NODE_ID                 8 /* node ID register            (bank 0) */
136 #define MAR_ADR                 8 /* multicast address registers (bank 1) */
137 
138 #define DATAPORT                8 /* buffer mem port registers   (bank 2) */
139 #define TX_START               10 /* transmit start register */
140 #define COL_CTRL               11 /* 16 collision control register */
141 #define BMPR12                 12 /* reserved */
142 #define BMPR13                 13 /* reserved */
143 #define RX_SKIP                14 /* skip received packet register */
144 
145 #define LAN_CTRL               16 /* LAN card control register */
146 
147 #define MAC_ID               0x1a /* hardware address */
148 #define UNGERMANN_MAC_ID     0x18 /* UNGERMANN-BASS hardware address */
149 
150 /*
151     control bits
152  */
153 #define ENA_TMT_OK           0x80
154 #define ENA_TMT_REC          0x20
155 #define ENA_COL              0x04
156 #define ENA_16_COL           0x02
157 #define ENA_TBUS_ERR         0x01
158 
159 #define ENA_PKT_RDY          0x80
160 #define ENA_BUS_ERR          0x40
161 #define ENA_LEN_ERR          0x08
162 #define ENA_ALG_ERR          0x04
163 #define ENA_CRC_ERR          0x02
164 #define ENA_OVR_FLO          0x01
165 
166 /* flags */
167 #define F_TMT_RDY            0x80 /* can accept new packet */
168 #define F_NET_BSY            0x40 /* carrier is detected */
169 #define F_TMT_OK             0x20 /* send packet successfully */
170 #define F_SRT_PKT            0x10 /* short packet error */
171 #define F_COL_ERR            0x04 /* collision error */
172 #define F_16_COL             0x02 /* 16 collision error */
173 #define F_TBUS_ERR           0x01 /* bus read error */
174 
175 #define F_PKT_RDY            0x80 /* packet(s) in buffer */
176 #define F_BUS_ERR            0x40 /* bus read error */
177 #define F_LEN_ERR            0x08 /* short packet */
178 #define F_ALG_ERR            0x04 /* frame error */
179 #define F_CRC_ERR            0x02 /* CRC error */
180 #define F_OVR_FLO            0x01 /* overflow error */
181 
182 #define F_BUF_EMP            0x40 /* receive buffer is empty */
183 
184 #define F_SKP_PKT            0x05 /* drop packet in buffer */
185 
186 /* default bitmaps */
187 #define D_TX_INTR  ( ENA_TMT_OK )
188 #define D_RX_INTR  ( ENA_PKT_RDY | ENA_LEN_ERR \
189 		   | ENA_ALG_ERR | ENA_CRC_ERR | ENA_OVR_FLO )
190 #define TX_STAT_M  ( F_TMT_RDY )
191 #define RX_STAT_M  ( F_PKT_RDY | F_LEN_ERR \
192                    | F_ALG_ERR | F_CRC_ERR | F_OVR_FLO )
193 
194 /* commands */
195 #define D_TX_MODE            0x06 /* no tests, detect carrier */
196 #define ID_MATCHED           0x02 /* (RX_MODE) */
197 #define RECV_ALL             0x03 /* (RX_MODE) */
198 #define CONFIG0_DFL          0x5a /* 16bit bus, 4K x 2 Tx queues */
199 #define CONFIG0_DFL_1        0x5e /* 16bit bus, 8K x 2 Tx queues */
200 #define CONFIG0_RST          0xda /* Data Link Controller off (CONFIG_0) */
201 #define CONFIG0_RST_1        0xde /* Data Link Controller off (CONFIG_0) */
202 #define BANK_0               0xa0 /* bank 0 (CONFIG_1) */
203 #define BANK_1               0xa4 /* bank 1 (CONFIG_1) */
204 #define BANK_2               0xa8 /* bank 2 (CONFIG_1) */
205 #define CHIP_OFF             0x80 /* contrl chip power off (CONFIG_1) */
206 #define DO_TX                0x80 /* do transmit packet */
207 #define SEND_PKT             0x81 /* send a packet */
208 #define AUTO_MODE            0x07 /* Auto skip packet on 16 col detected */
209 #define MANU_MODE            0x03 /* Stop and skip packet on 16 col */
210 #define TDK_AUTO_MODE        0x47 /* Auto skip packet on 16 col detected */
211 #define TDK_MANU_MODE        0x43 /* Stop and skip packet on 16 col */
212 #define INTR_OFF             0x0d /* LAN controller ignores interrupts */
213 #define INTR_ON              0x1d /* LAN controller will catch interrupts */
214 
215 #define TX_TIMEOUT		((400*HZ)/1000)
216 
217 #define BANK_0U              0x20 /* bank 0 (CONFIG_1) */
218 #define BANK_1U              0x24 /* bank 1 (CONFIG_1) */
219 #define BANK_2U              0x28 /* bank 2 (CONFIG_1) */
220 
221 static const struct net_device_ops fjn_netdev_ops = {
222 	.ndo_open 		= fjn_open,
223 	.ndo_stop		= fjn_close,
224 	.ndo_start_xmit 	= fjn_start_xmit,
225 	.ndo_tx_timeout 	= fjn_tx_timeout,
226 	.ndo_set_config 	= fjn_config,
227 	.ndo_set_rx_mode	= set_rx_mode,
228 	.ndo_set_mac_address 	= eth_mac_addr,
229 	.ndo_validate_addr	= eth_validate_addr,
230 };
231 
232 static int fmvj18x_probe(struct pcmcia_device *link)
233 {
234     struct local_info *lp;
235     struct net_device *dev;
236 
237     dev_dbg(&link->dev, "fmvj18x_attach()\n");
238 
239     /* Make up a FMVJ18x specific data structure */
240     dev = alloc_etherdev(sizeof(struct local_info));
241     if (!dev)
242 	return -ENOMEM;
243     lp = netdev_priv(dev);
244     link->priv = dev;
245     lp->p_dev = link;
246     lp->base = NULL;
247 
248     /* The io structure describes IO port mapping */
249     link->resource[0]->end = 32;
250     link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
251 
252     /* General socket configuration */
253     link->config_flags |= CONF_ENABLE_IRQ;
254 
255     dev->netdev_ops = &fjn_netdev_ops;
256     dev->watchdog_timeo = TX_TIMEOUT;
257 
258     dev->ethtool_ops = &netdev_ethtool_ops;
259 
260     return fmvj18x_config(link);
261 } /* fmvj18x_attach */
262 
263 /*====================================================================*/
264 
265 static void fmvj18x_detach(struct pcmcia_device *link)
266 {
267     struct net_device *dev = link->priv;
268 
269     dev_dbg(&link->dev, "fmvj18x_detach\n");
270 
271     unregister_netdev(dev);
272 
273     fmvj18x_release(link);
274 
275     free_netdev(dev);
276 } /* fmvj18x_detach */
277 
278 /*====================================================================*/
279 
280 static int mfc_try_io_port(struct pcmcia_device *link)
281 {
282     int i, ret;
283     static const unsigned int serial_base[5] =
284 	{ 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
285 
286     for (i = 0; i < 5; i++) {
287 	link->resource[1]->start = serial_base[i];
288 	link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
289 	if (link->resource[1]->start == 0) {
290 	    link->resource[1]->end = 0;
291 	    pr_notice("out of resource for serial\n");
292 	}
293 	ret = pcmcia_request_io(link);
294 	if (ret == 0)
295 		return ret;
296     }
297     return ret;
298 }
299 
300 static int ungermann_try_io_port(struct pcmcia_device *link)
301 {
302     int ret;
303     unsigned int ioaddr;
304     /*
305 	Ungermann-Bass Access/CARD accepts 0x300,0x320,0x340,0x360
306 	0x380,0x3c0 only for ioport.
307     */
308     for (ioaddr = 0x300; ioaddr < 0x3e0; ioaddr += 0x20) {
309 	link->resource[0]->start = ioaddr;
310 	ret = pcmcia_request_io(link);
311 	if (ret == 0) {
312 	    /* calculate ConfigIndex value */
313 	    link->config_index =
314 		((link->resource[0]->start & 0x0f0) >> 3) | 0x22;
315 	    return ret;
316 	}
317     }
318     return ret;	/* RequestIO failed */
319 }
320 
321 static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, void *priv_data)
322 {
323 	return 0; /* strange, but that's what the code did already before... */
324 }
325 
326 static int fmvj18x_config(struct pcmcia_device *link)
327 {
328     struct net_device *dev = link->priv;
329     struct local_info *lp = netdev_priv(dev);
330     int i, ret;
331     unsigned int ioaddr;
332     enum cardtype cardtype;
333     char *card_name = "unknown";
334     u8 *buf;
335     size_t len;
336     u_char buggybuf[32];
337 
338     dev_dbg(&link->dev, "fmvj18x_config\n");
339 
340     link->io_lines = 5;
341 
342     len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf);
343     kfree(buf);
344 
345     if (len) {
346 	/* Yes, I have CISTPL_FUNCE. Let's check CISTPL_MANFID */
347 	ret = pcmcia_loop_config(link, fmvj18x_ioprobe, NULL);
348 	if (ret != 0)
349 		goto failed;
350 
351 	switch (link->manf_id) {
352 	case MANFID_TDK:
353 	    cardtype = TDK;
354 	    if (link->card_id == PRODID_TDK_GN3410 ||
355 		link->card_id == PRODID_TDK_NP9610 ||
356 		link->card_id == PRODID_TDK_MN3200) {
357 		/* MultiFunction Card */
358 		link->config_base = 0x800;
359 		link->config_index = 0x47;
360 		link->resource[1]->end = 8;
361 	    }
362 	    break;
363 	case MANFID_NEC:
364 	    cardtype = NEC; /* MultiFunction Card */
365 	    link->config_base = 0x800;
366 	    link->config_index = 0x47;
367 	    link->resource[1]->end = 8;
368 	    break;
369 	case MANFID_KME:
370 	    cardtype = KME; /* MultiFunction Card */
371 	    link->config_base = 0x800;
372 	    link->config_index = 0x47;
373 	    link->resource[1]->end = 8;
374 	    break;
375 	case MANFID_CONTEC:
376 	    cardtype = CONTEC;
377 	    break;
378 	case MANFID_FUJITSU:
379 	    if (link->config_base == 0x0fe0)
380 		cardtype = MBH10302;
381 	    else if (link->card_id == PRODID_FUJITSU_MBH10302)
382                 /* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302),
383                    but these are MBH10304 based card. */
384 		cardtype = MBH10304;
385 	    else if (link->card_id == PRODID_FUJITSU_MBH10304)
386 		cardtype = MBH10304;
387 	    else
388 		cardtype = LA501;
389 	    break;
390 	default:
391 	    cardtype = MBH10304;
392 	}
393     } else {
394 	/* old type card */
395 	switch (link->manf_id) {
396 	case MANFID_FUJITSU:
397 	    if (link->card_id == PRODID_FUJITSU_MBH10304) {
398 		cardtype = XXX10304;    /* MBH10304 with buggy CIS */
399 		link->config_index = 0x20;
400 	    } else {
401 		cardtype = MBH10302;    /* NextCom NC5310, etc. */
402 		link->config_index = 1;
403 	    }
404 	    break;
405 	case MANFID_UNGERMANN:
406 	    cardtype = UNGERMANN;
407 	    break;
408 	default:
409 	    cardtype = MBH10302;
410 	    link->config_index = 1;
411 	}
412     }
413 
414     if (link->resource[1]->end != 0) {
415 	ret = mfc_try_io_port(link);
416 	if (ret != 0) goto failed;
417     } else if (cardtype == UNGERMANN) {
418 	ret = ungermann_try_io_port(link);
419 	if (ret != 0) goto failed;
420     } else {
421 	    ret = pcmcia_request_io(link);
422 	    if (ret)
423 		    goto failed;
424     }
425     ret = pcmcia_request_irq(link, fjn_interrupt);
426     if (ret)
427 	    goto failed;
428     ret = pcmcia_enable_device(link);
429     if (ret)
430 	    goto failed;
431 
432     dev->irq = link->irq;
433     dev->base_addr = link->resource[0]->start;
434 
435     if (resource_size(link->resource[1]) != 0) {
436 	ret = fmvj18x_setup_mfc(link);
437 	if (ret != 0) goto failed;
438     }
439 
440     ioaddr = dev->base_addr;
441 
442     /* Reset controller */
443     if (sram_config == 0)
444 	outb(CONFIG0_RST, ioaddr + CONFIG_0);
445     else
446 	outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
447 
448     /* Power On chip and select bank 0 */
449     if (cardtype == MBH10302)
450 	outb(BANK_0, ioaddr + CONFIG_1);
451     else
452 	outb(BANK_0U, ioaddr + CONFIG_1);
453 
454     /* Set hardware address */
455     switch (cardtype) {
456     case MBH10304:
457     case TDK:
458     case LA501:
459     case CONTEC:
460     case NEC:
461     case KME:
462 	if (cardtype == MBH10304) {
463 	    card_name = "FMV-J182";
464 
465 	    len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf);
466 	    if (len < 11) {
467 		    kfree(buf);
468 		    goto failed;
469 	    }
470 	    /* Read MACID from CIS */
471 	    eth_hw_addr_set(dev, &buf[5]);
472 	    kfree(buf);
473 	} else {
474 	    if (pcmcia_get_mac_from_cis(link, dev))
475 		goto failed;
476 	    if( cardtype == TDK ) {
477 		card_name = "TDK LAK-CD021";
478 	    } else if( cardtype == LA501 ) {
479 		card_name = "LA501";
480 	    } else if( cardtype == NEC ) {
481 		card_name = "PK-UG-J001";
482 	    } else if( cardtype == KME ) {
483 		card_name = "Panasonic";
484 	    } else {
485 		card_name = "C-NET(PC)C";
486 	    }
487 	}
488 	break;
489     case UNGERMANN:
490 	/* Read MACID from register */
491 	for (i = 0; i < 6; i++)
492 	    dev->dev_addr[i] = inb(ioaddr + UNGERMANN_MAC_ID + i);
493 	card_name = "Access/CARD";
494 	break;
495     case XXX10304:
496 	/* Read MACID from Buggy CIS */
497 	if (fmvj18x_get_hwinfo(link, buggybuf) == -1) {
498 	    pr_notice("unable to read hardware net address\n");
499 	    goto failed;
500 	}
501 	eth_hw_addr_set(dev, buggybuf);
502 	card_name = "FMV-J182";
503 	break;
504     case MBH10302:
505     default:
506 	/* Read MACID from register */
507 	for (i = 0; i < 6; i++)
508 	    dev->dev_addr[i] = inb(ioaddr + MAC_ID + i);
509 	card_name = "FMV-J181";
510 	break;
511     }
512 
513     lp->cardtype = cardtype;
514     SET_NETDEV_DEV(dev, &link->dev);
515 
516     if (register_netdev(dev) != 0) {
517 	pr_notice("register_netdev() failed\n");
518 	goto failed;
519     }
520 
521     /* print current configuration */
522     netdev_info(dev, "%s, sram %s, port %#3lx, irq %d, hw_addr %pM\n",
523 		card_name, sram_config == 0 ? "4K TX*2" : "8K TX*2",
524 		dev->base_addr, dev->irq, dev->dev_addr);
525 
526     return 0;
527 
528 failed:
529     fmvj18x_release(link);
530     return -ENODEV;
531 } /* fmvj18x_config */
532 /*====================================================================*/
533 
534 static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
535 {
536     u_char __iomem *base;
537     int i, j;
538 
539     /* Allocate a small memory window */
540     link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
541     link->resource[2]->start = 0; link->resource[2]->end = 0;
542     i = pcmcia_request_window(link, link->resource[2], 0);
543     if (i != 0)
544 	return -1;
545 
546     base = ioremap(link->resource[2]->start, resource_size(link->resource[2]));
547     if (!base) {
548 	pcmcia_release_window(link, link->resource[2]);
549 	return -1;
550     }
551 
552     pcmcia_map_mem_page(link, link->resource[2], 0);
553 
554     /*
555      *  MBH10304 CISTPL_FUNCE_LAN_NODE_ID format
556      *  22 0d xx xx xx 04 06 yy yy yy yy yy yy ff
557      *  'xx' is garbage.
558      *  'yy' is MAC address.
559     */
560     for (i = 0; i < 0x200; i++) {
561 	if (readb(base+i*2) == 0x22) {
562 		if (readb(base+(i-1)*2) == 0xff &&
563 		    readb(base+(i+5)*2) == 0x04 &&
564 		    readb(base+(i+6)*2) == 0x06 &&
565 		    readb(base+(i+13)*2) == 0xff)
566 			break;
567 	}
568     }
569 
570     if (i != 0x200) {
571 	for (j = 0 ; j < 6; j++,i++) {
572 	    node_id[j] = readb(base+(i+7)*2);
573 	}
574     }
575 
576     iounmap(base);
577     j = pcmcia_release_window(link, link->resource[2]);
578     return (i != 0x200) ? 0 : -1;
579 
580 } /* fmvj18x_get_hwinfo */
581 /*====================================================================*/
582 
583 static int fmvj18x_setup_mfc(struct pcmcia_device *link)
584 {
585     int i;
586     struct net_device *dev = link->priv;
587     unsigned int ioaddr;
588     struct local_info *lp = netdev_priv(dev);
589 
590     /* Allocate a small memory window */
591     link->resource[3]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
592     link->resource[3]->start = link->resource[3]->end = 0;
593     i = pcmcia_request_window(link, link->resource[3], 0);
594     if (i != 0)
595 	return -1;
596 
597     lp->base = ioremap(link->resource[3]->start,
598 		       resource_size(link->resource[3]));
599     if (lp->base == NULL) {
600 	netdev_notice(dev, "ioremap failed\n");
601 	return -1;
602     }
603 
604     i = pcmcia_map_mem_page(link, link->resource[3], 0);
605     if (i != 0) {
606 	iounmap(lp->base);
607 	lp->base = NULL;
608 	return -1;
609     }
610 
611     ioaddr = dev->base_addr;
612     writeb(0x47, lp->base+0x800);	/* Config Option Register of LAN */
613     writeb(0x0,  lp->base+0x802);	/* Config and Status Register */
614 
615     writeb(ioaddr & 0xff, lp->base+0x80a);	  /* I/O Base(Low) of LAN */
616     writeb((ioaddr >> 8) & 0xff, lp->base+0x80c); /* I/O Base(High) of LAN */
617 
618     writeb(0x45, lp->base+0x820);	/* Config Option Register of Modem */
619     writeb(0x8,  lp->base+0x822);	/* Config and Status Register */
620 
621     return 0;
622 
623 }
624 /*====================================================================*/
625 
626 static void fmvj18x_release(struct pcmcia_device *link)
627 {
628 
629     struct net_device *dev = link->priv;
630     struct local_info *lp = netdev_priv(dev);
631     u_char __iomem *tmp;
632 
633     dev_dbg(&link->dev, "fmvj18x_release\n");
634 
635     if (lp->base != NULL) {
636 	tmp = lp->base;
637 	lp->base = NULL;    /* set NULL before iounmap */
638 	iounmap(tmp);
639     }
640 
641     pcmcia_disable_device(link);
642 
643 }
644 
645 static int fmvj18x_suspend(struct pcmcia_device *link)
646 {
647 	struct net_device *dev = link->priv;
648 
649 	if (link->open)
650 		netif_device_detach(dev);
651 
652 	return 0;
653 }
654 
655 static int fmvj18x_resume(struct pcmcia_device *link)
656 {
657 	struct net_device *dev = link->priv;
658 
659 	if (link->open) {
660 		fjn_reset(dev);
661 		netif_device_attach(dev);
662 	}
663 
664 	return 0;
665 }
666 
667 /*====================================================================*/
668 
669 static const struct pcmcia_device_id fmvj18x_ids[] = {
670 	PCMCIA_DEVICE_MANF_CARD(0x0004, 0x0004),
671 	PCMCIA_DEVICE_PROD_ID12("EAGLE Technology", "NE200 ETHERNET LAN MBH10302 04", 0x528c88c4, 0x74f91e59),
672 	PCMCIA_DEVICE_PROD_ID12("Eiger Labs,Inc", "EPX-10BT PC Card Ethernet 10BT", 0x53af556e, 0x877f9922),
673 	PCMCIA_DEVICE_PROD_ID12("Eiger labs,Inc.", "EPX-10BT PC Card Ethernet 10BT", 0xf47e6c66, 0x877f9922),
674 	PCMCIA_DEVICE_PROD_ID12("FUJITSU", "LAN Card(FMV-J182)", 0x6ee5a3d8, 0x5baf31db),
675 	PCMCIA_DEVICE_PROD_ID12("FUJITSU", "MBH10308", 0x6ee5a3d8, 0x3f04875e),
676 	PCMCIA_DEVICE_PROD_ID12("FUJITSU TOWA", "LA501", 0xb8451188, 0x12939ba2),
677 	PCMCIA_DEVICE_PROD_ID12("HITACHI", "HT-4840-11", 0xf4f43949, 0x773910f4),
678 	PCMCIA_DEVICE_PROD_ID12("NextComK.K.", "NC5310B Ver1.0       ", 0x8cef4d3a, 0x075fc7b6),
679 	PCMCIA_DEVICE_PROD_ID12("NextComK.K.", "NC5310 Ver1.0        ", 0x8cef4d3a, 0xbccf43e6),
680 	PCMCIA_DEVICE_PROD_ID12("RATOC System Inc.", "10BASE_T CARD R280", 0x85c10e17, 0xd9413666),
681 	PCMCIA_DEVICE_PROD_ID12("TDK", "LAC-CD02x", 0x1eae9475, 0x8fa0ee70),
682 	PCMCIA_DEVICE_PROD_ID12("TDK", "LAC-CF010", 0x1eae9475, 0x7683bc9a),
683 	PCMCIA_DEVICE_PROD_ID1("CONTEC Co.,Ltd.", 0x58d8fee2),
684 	PCMCIA_DEVICE_PROD_ID1("PCMCIA LAN MBH10304  ES", 0x2599f454),
685 	PCMCIA_DEVICE_PROD_ID1("PCMCIA MBH10302", 0x8f4005da),
686 	PCMCIA_DEVICE_PROD_ID1("UBKK,V2.0", 0x90888080),
687 	PCMCIA_PFC_DEVICE_PROD_ID12(0, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
688 	PCMCIA_PFC_DEVICE_PROD_ID12(0, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
689 	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0d0a),
690 	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0e0a),
691 	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0e01),
692 	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0a05),
693 	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0b05),
694 	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x1101),
695 	PCMCIA_DEVICE_NULL,
696 };
697 MODULE_DEVICE_TABLE(pcmcia, fmvj18x_ids);
698 
699 static struct pcmcia_driver fmvj18x_cs_driver = {
700 	.owner		= THIS_MODULE,
701 	.name		= "fmvj18x_cs",
702 	.probe		= fmvj18x_probe,
703 	.remove		= fmvj18x_detach,
704 	.id_table       = fmvj18x_ids,
705 	.suspend	= fmvj18x_suspend,
706 	.resume		= fmvj18x_resume,
707 };
708 module_pcmcia_driver(fmvj18x_cs_driver);
709 
710 /*====================================================================*/
711 
712 static irqreturn_t fjn_interrupt(int dummy, void *dev_id)
713 {
714     struct net_device *dev = dev_id;
715     struct local_info *lp = netdev_priv(dev);
716     unsigned int ioaddr;
717     unsigned short tx_stat, rx_stat;
718 
719     ioaddr = dev->base_addr;
720 
721     /* avoid multiple interrupts */
722     outw(0x0000, ioaddr + TX_INTR);
723 
724     /* wait for a while */
725     udelay(1);
726 
727     /* get status */
728     tx_stat = inb(ioaddr + TX_STATUS);
729     rx_stat = inb(ioaddr + RX_STATUS);
730 
731     /* clear status */
732     outb(tx_stat, ioaddr + TX_STATUS);
733     outb(rx_stat, ioaddr + RX_STATUS);
734 
735     pr_debug("%s: interrupt, rx_status %02x.\n", dev->name, rx_stat);
736     pr_debug("               tx_status %02x.\n", tx_stat);
737 
738     if (rx_stat || (inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) {
739 	/* there is packet(s) in rx buffer */
740 	fjn_rx(dev);
741     }
742     if (tx_stat & F_TMT_RDY) {
743 	dev->stats.tx_packets += lp->sent ;
744         lp->sent = 0 ;
745 	if (lp->tx_queue) {
746 	    outb(DO_TX | lp->tx_queue, ioaddr + TX_START);
747 	    lp->sent = lp->tx_queue ;
748 	    lp->tx_queue = 0;
749 	    lp->tx_queue_len = 0;
750 	    netif_trans_update(dev);
751 	} else {
752 	    lp->tx_started = 0;
753 	}
754 	netif_wake_queue(dev);
755     }
756     pr_debug("%s: exiting interrupt,\n", dev->name);
757     pr_debug("    tx_status %02x, rx_status %02x.\n", tx_stat, rx_stat);
758 
759     outb(D_TX_INTR, ioaddr + TX_INTR);
760     outb(D_RX_INTR, ioaddr + RX_INTR);
761 
762     if (lp->base != NULL) {
763 	/* Ack interrupt for multifunction card */
764 	writeb(0x01, lp->base+0x802);
765 	writeb(0x09, lp->base+0x822);
766     }
767 
768     return IRQ_HANDLED;
769 
770 } /* fjn_interrupt */
771 
772 /*====================================================================*/
773 
774 static void fjn_tx_timeout(struct net_device *dev, unsigned int txqueue)
775 {
776     struct local_info *lp = netdev_priv(dev);
777     unsigned int ioaddr = dev->base_addr;
778 
779     netdev_notice(dev, "transmit timed out with status %04x, %s?\n",
780 		  htons(inw(ioaddr + TX_STATUS)),
781 		  inb(ioaddr + TX_STATUS) & F_TMT_RDY
782 		  ? "IRQ conflict" : "network cable problem");
783     netdev_notice(dev, "timeout registers: %04x %04x %04x "
784 		  "%04x %04x %04x %04x %04x.\n",
785 		  htons(inw(ioaddr + 0)), htons(inw(ioaddr + 2)),
786 		  htons(inw(ioaddr + 4)), htons(inw(ioaddr + 6)),
787 		  htons(inw(ioaddr + 8)), htons(inw(ioaddr + 10)),
788 		  htons(inw(ioaddr + 12)), htons(inw(ioaddr + 14)));
789     dev->stats.tx_errors++;
790     /* ToDo: We should try to restart the adaptor... */
791     local_irq_disable();
792     fjn_reset(dev);
793 
794     lp->tx_started = 0;
795     lp->tx_queue = 0;
796     lp->tx_queue_len = 0;
797     lp->sent = 0;
798     lp->open_time = jiffies;
799     local_irq_enable();
800     netif_wake_queue(dev);
801 }
802 
803 static netdev_tx_t fjn_start_xmit(struct sk_buff *skb,
804 					struct net_device *dev)
805 {
806     struct local_info *lp = netdev_priv(dev);
807     unsigned int ioaddr = dev->base_addr;
808     short length = skb->len;
809 
810     if (length < ETH_ZLEN)
811     {
812 	if (skb_padto(skb, ETH_ZLEN))
813 		return NETDEV_TX_OK;
814 	length = ETH_ZLEN;
815     }
816 
817     netif_stop_queue(dev);
818 
819     {
820 	unsigned char *buf = skb->data;
821 
822 	if (length > ETH_FRAME_LEN) {
823 	    netdev_notice(dev, "Attempting to send a large packet (%d bytes)\n",
824 			  length);
825 	    return NETDEV_TX_BUSY;
826 	}
827 
828 	netdev_dbg(dev, "Transmitting a packet of length %lu\n",
829 		   (unsigned long)skb->len);
830 	dev->stats.tx_bytes += skb->len;
831 
832 	/* Disable both interrupts. */
833 	outw(0x0000, ioaddr + TX_INTR);
834 
835 	/* wait for a while */
836 	udelay(1);
837 
838 	outw(length, ioaddr + DATAPORT);
839 	outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1);
840 
841 	lp->tx_queue++;
842 	lp->tx_queue_len += ((length+3) & ~1);
843 
844 	if (lp->tx_started == 0) {
845 	    /* If the Tx is idle, always trigger a transmit. */
846 	    outb(DO_TX | lp->tx_queue, ioaddr + TX_START);
847 	    lp->sent = lp->tx_queue ;
848 	    lp->tx_queue = 0;
849 	    lp->tx_queue_len = 0;
850 	    lp->tx_started = 1;
851 	    netif_start_queue(dev);
852 	} else {
853 	    if( sram_config == 0 ) {
854 		if (lp->tx_queue_len < (4096 - (ETH_FRAME_LEN +2)) )
855 		    /* Yes, there is room for one more packet. */
856 		    netif_start_queue(dev);
857 	    } else {
858 		if (lp->tx_queue_len < (8192 - (ETH_FRAME_LEN +2)) &&
859 						lp->tx_queue < 127 )
860 		    /* Yes, there is room for one more packet. */
861 		    netif_start_queue(dev);
862 	    }
863 	}
864 
865 	/* Re-enable interrupts */
866 	outb(D_TX_INTR, ioaddr + TX_INTR);
867 	outb(D_RX_INTR, ioaddr + RX_INTR);
868     }
869     dev_kfree_skb (skb);
870 
871     return NETDEV_TX_OK;
872 } /* fjn_start_xmit */
873 
874 /*====================================================================*/
875 
876 static void fjn_reset(struct net_device *dev)
877 {
878     struct local_info *lp = netdev_priv(dev);
879     unsigned int ioaddr = dev->base_addr;
880     int i;
881 
882     netdev_dbg(dev, "fjn_reset() called\n");
883 
884     /* Reset controller */
885     if( sram_config == 0 )
886 	outb(CONFIG0_RST, ioaddr + CONFIG_0);
887     else
888 	outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
889 
890     /* Power On chip and select bank 0 */
891     if (lp->cardtype == MBH10302)
892 	outb(BANK_0, ioaddr + CONFIG_1);
893     else
894 	outb(BANK_0U, ioaddr + CONFIG_1);
895 
896     /* Set Tx modes */
897     outb(D_TX_MODE, ioaddr + TX_MODE);
898     /* set Rx modes */
899     outb(ID_MATCHED, ioaddr + RX_MODE);
900 
901     /* Set hardware address */
902     for (i = 0; i < 6; i++)
903         outb(dev->dev_addr[i], ioaddr + NODE_ID + i);
904 
905     /* (re)initialize the multicast table */
906     set_rx_mode(dev);
907 
908     /* Switch to bank 2 (runtime mode) */
909     if (lp->cardtype == MBH10302)
910 	outb(BANK_2, ioaddr + CONFIG_1);
911     else
912 	outb(BANK_2U, ioaddr + CONFIG_1);
913 
914     /* set 16col ctrl bits */
915     if( lp->cardtype == TDK || lp->cardtype == CONTEC)
916         outb(TDK_AUTO_MODE, ioaddr + COL_CTRL);
917     else
918         outb(AUTO_MODE, ioaddr + COL_CTRL);
919 
920     /* clear Reserved Regs */
921     outb(0x00, ioaddr + BMPR12);
922     outb(0x00, ioaddr + BMPR13);
923 
924     /* reset Skip packet reg. */
925     outb(0x01, ioaddr + RX_SKIP);
926 
927     /* Enable Tx and Rx */
928     if( sram_config == 0 )
929 	outb(CONFIG0_DFL, ioaddr + CONFIG_0);
930     else
931 	outb(CONFIG0_DFL_1, ioaddr + CONFIG_0);
932 
933     /* Init receive pointer ? */
934     inw(ioaddr + DATAPORT);
935     inw(ioaddr + DATAPORT);
936 
937     /* Clear all status */
938     outb(0xff, ioaddr + TX_STATUS);
939     outb(0xff, ioaddr + RX_STATUS);
940 
941     if (lp->cardtype == MBH10302)
942 	outb(INTR_OFF, ioaddr + LAN_CTRL);
943 
944     /* Turn on Rx interrupts */
945     outb(D_TX_INTR, ioaddr + TX_INTR);
946     outb(D_RX_INTR, ioaddr + RX_INTR);
947 
948     /* Turn on interrupts from LAN card controller */
949     if (lp->cardtype == MBH10302)
950 	outb(INTR_ON, ioaddr + LAN_CTRL);
951 } /* fjn_reset */
952 
953 /*====================================================================*/
954 
955 static void fjn_rx(struct net_device *dev)
956 {
957     unsigned int ioaddr = dev->base_addr;
958     int boguscount = 10;	/* 5 -> 10: by agy 19940922 */
959 
960     pr_debug("%s: in rx_packet(), rx_status %02x.\n",
961 	  dev->name, inb(ioaddr + RX_STATUS));
962 
963     while ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) {
964 	u_short status = inw(ioaddr + DATAPORT);
965 
966 	netdev_dbg(dev, "Rxing packet mode %02x status %04x.\n",
967 		   inb(ioaddr + RX_MODE), status);
968 #ifndef final_version
969 	if (status == 0) {
970 	    outb(F_SKP_PKT, ioaddr + RX_SKIP);
971 	    break;
972 	}
973 #endif
974 	if ((status & 0xF0) != 0x20) {	/* There was an error. */
975 	    dev->stats.rx_errors++;
976 	    if (status & F_LEN_ERR) dev->stats.rx_length_errors++;
977 	    if (status & F_ALG_ERR) dev->stats.rx_frame_errors++;
978 	    if (status & F_CRC_ERR) dev->stats.rx_crc_errors++;
979 	    if (status & F_OVR_FLO) dev->stats.rx_over_errors++;
980 	} else {
981 	    u_short pkt_len = inw(ioaddr + DATAPORT);
982 	    /* Malloc up new buffer. */
983 	    struct sk_buff *skb;
984 
985 	    if (pkt_len > 1550) {
986 		netdev_notice(dev, "The FMV-18x claimed a very large packet, size %d\n",
987 			      pkt_len);
988 		outb(F_SKP_PKT, ioaddr + RX_SKIP);
989 		dev->stats.rx_errors++;
990 		break;
991 	    }
992 	    skb = netdev_alloc_skb(dev, pkt_len + 2);
993 	    if (skb == NULL) {
994 		outb(F_SKP_PKT, ioaddr + RX_SKIP);
995 		dev->stats.rx_dropped++;
996 		break;
997 	    }
998 
999 	    skb_reserve(skb, 2);
1000 	    insw(ioaddr + DATAPORT, skb_put(skb, pkt_len),
1001 		 (pkt_len + 1) >> 1);
1002 	    skb->protocol = eth_type_trans(skb, dev);
1003 
1004 	    {
1005 		int i;
1006 		pr_debug("%s: Rxed packet of length %d: ",
1007 			dev->name, pkt_len);
1008 		for (i = 0; i < 14; i++)
1009 			pr_debug(" %02x", skb->data[i]);
1010 		pr_debug(".\n");
1011 	    }
1012 
1013 	    netif_rx(skb);
1014 	    dev->stats.rx_packets++;
1015 	    dev->stats.rx_bytes += pkt_len;
1016 	}
1017 	if (--boguscount <= 0)
1018 	    break;
1019     }
1020 
1021     /* If any worth-while packets have been received, dev_rint()
1022 	   has done a netif_wake_queue() for us and will work on them
1023 	   when we get to the bottom-half routine. */
1024 /*
1025     if (lp->cardtype != TDK) {
1026 	int i;
1027 	for (i = 0; i < 20; i++) {
1028 	    if ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == F_BUF_EMP)
1029 		break;
1030 	    (void)inw(ioaddr + DATAPORT);  /+ dummy status read +/
1031 	    outb(F_SKP_PKT, ioaddr + RX_SKIP);
1032 	}
1033 
1034 	if (i > 0)
1035 	    pr_debug("%s: Exint Rx packet with mode %02x after "
1036 		  "%d ticks.\n", dev->name, inb(ioaddr + RX_MODE), i);
1037     }
1038 */
1039 } /* fjn_rx */
1040 
1041 /*====================================================================*/
1042 
1043 static void netdev_get_drvinfo(struct net_device *dev,
1044 			       struct ethtool_drvinfo *info)
1045 {
1046 	strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
1047 	strlcpy(info->version, DRV_VERSION, sizeof(info->version));
1048 	snprintf(info->bus_info, sizeof(info->bus_info),
1049 		"PCMCIA 0x%lx", dev->base_addr);
1050 }
1051 
1052 static const struct ethtool_ops netdev_ethtool_ops = {
1053 	.get_drvinfo		= netdev_get_drvinfo,
1054 };
1055 
1056 static int fjn_config(struct net_device *dev, struct ifmap *map){
1057     return 0;
1058 }
1059 
1060 static int fjn_open(struct net_device *dev)
1061 {
1062     struct local_info *lp = netdev_priv(dev);
1063     struct pcmcia_device *link = lp->p_dev;
1064 
1065     pr_debug("fjn_open('%s').\n", dev->name);
1066 
1067     if (!pcmcia_dev_present(link))
1068 	return -ENODEV;
1069 
1070     link->open++;
1071 
1072     fjn_reset(dev);
1073 
1074     lp->tx_started = 0;
1075     lp->tx_queue = 0;
1076     lp->tx_queue_len = 0;
1077     lp->open_time = jiffies;
1078     netif_start_queue(dev);
1079 
1080     return 0;
1081 } /* fjn_open */
1082 
1083 /*====================================================================*/
1084 
1085 static int fjn_close(struct net_device *dev)
1086 {
1087     struct local_info *lp = netdev_priv(dev);
1088     struct pcmcia_device *link = lp->p_dev;
1089     unsigned int ioaddr = dev->base_addr;
1090 
1091     pr_debug("fjn_close('%s').\n", dev->name);
1092 
1093     lp->open_time = 0;
1094     netif_stop_queue(dev);
1095 
1096     /* Set configuration register 0 to disable Tx and Rx. */
1097     if( sram_config == 0 )
1098 	outb(CONFIG0_RST ,ioaddr + CONFIG_0);
1099     else
1100 	outb(CONFIG0_RST_1 ,ioaddr + CONFIG_0);
1101 
1102     /* Update the statistics -- ToDo. */
1103 
1104     /* Power-down the chip.  Green, green, green! */
1105     outb(CHIP_OFF ,ioaddr + CONFIG_1);
1106 
1107     /* Set the ethernet adaptor disable IRQ */
1108     if (lp->cardtype == MBH10302)
1109 	outb(INTR_OFF, ioaddr + LAN_CTRL);
1110 
1111     link->open--;
1112 
1113     return 0;
1114 } /* fjn_close */
1115 
1116 /*====================================================================*/
1117 
1118 /*
1119   Set the multicast/promiscuous mode for this adaptor.
1120 */
1121 
1122 static void set_rx_mode(struct net_device *dev)
1123 {
1124     unsigned int ioaddr = dev->base_addr;
1125     u_char mc_filter[8];		 /* Multicast hash filter */
1126     u_long flags;
1127     int i;
1128 
1129     int saved_bank;
1130     int saved_config_0 = inb(ioaddr + CONFIG_0);
1131 
1132     local_irq_save(flags);
1133 
1134     /* Disable Tx and Rx */
1135     if (sram_config == 0)
1136 	outb(CONFIG0_RST, ioaddr + CONFIG_0);
1137     else
1138 	outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
1139 
1140     if (dev->flags & IFF_PROMISC) {
1141 	memset(mc_filter, 0xff, sizeof(mc_filter));
1142 	outb(3, ioaddr + RX_MODE);	/* Enable promiscuous mode */
1143     } else if (netdev_mc_count(dev) > MC_FILTERBREAK ||
1144 	       (dev->flags & IFF_ALLMULTI)) {
1145 	/* Too many to filter perfectly -- accept all multicasts. */
1146 	memset(mc_filter, 0xff, sizeof(mc_filter));
1147 	outb(2, ioaddr + RX_MODE);	/* Use normal mode. */
1148     } else if (netdev_mc_empty(dev)) {
1149 	memset(mc_filter, 0x00, sizeof(mc_filter));
1150 	outb(1, ioaddr + RX_MODE);	/* Ignore almost all multicasts. */
1151     } else {
1152 	struct netdev_hw_addr *ha;
1153 
1154 	memset(mc_filter, 0, sizeof(mc_filter));
1155 	netdev_for_each_mc_addr(ha, dev) {
1156 	    unsigned int bit = ether_crc_le(ETH_ALEN, ha->addr) >> 26;
1157 	    mc_filter[bit >> 3] |= (1 << (bit & 7));
1158 	}
1159 	outb(2, ioaddr + RX_MODE);	/* Use normal mode. */
1160     }
1161 
1162     /* Switch to bank 1 and set the multicast table. */
1163     saved_bank = inb(ioaddr + CONFIG_1);
1164     outb(0xe4, ioaddr + CONFIG_1);
1165 
1166     for (i = 0; i < 8; i++)
1167 	outb(mc_filter[i], ioaddr + MAR_ADR + i);
1168     outb(saved_bank, ioaddr + CONFIG_1);
1169 
1170     outb(saved_config_0, ioaddr + CONFIG_0);
1171 
1172     local_irq_restore(flags);
1173 }
1174