1 // SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later 2 /* 3 * Copyright 2008 - 2015 Freescale Semiconductor Inc. 4 */ 5 6 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 7 8 #include <linux/io.h> 9 #include <linux/platform_device.h> 10 #include <linux/slab.h> 11 #include <linux/module.h> 12 #include <linux/interrupt.h> 13 #include <linux/of_platform.h> 14 #include <linux/of_address.h> 15 #include <linux/delay.h> 16 #include <linux/libfdt_env.h> 17 18 #include "fman.h" 19 #include "fman_port.h" 20 #include "fman_sp.h" 21 #include "fman_keygen.h" 22 23 /* Queue ID */ 24 #define DFLT_FQ_ID 0x00FFFFFF 25 26 /* General defines */ 27 #define PORT_BMI_FIFO_UNITS 0x100 28 29 #define MAX_PORT_FIFO_SIZE(bmi_max_fifo_size) \ 30 min((u32)bmi_max_fifo_size, (u32)1024 * FMAN_BMI_FIFO_UNITS) 31 32 #define PORT_CG_MAP_NUM 8 33 #define PORT_PRS_RESULT_WORDS_NUM 8 34 #define PORT_IC_OFFSET_UNITS 0x10 35 36 #define MIN_EXT_BUF_SIZE 64 37 38 #define BMI_PORT_REGS_OFFSET 0 39 #define QMI_PORT_REGS_OFFSET 0x400 40 #define HWP_PORT_REGS_OFFSET 0x800 41 42 /* Default values */ 43 #define DFLT_PORT_BUFFER_PREFIX_CONTEXT_DATA_ALIGN \ 44 DFLT_FM_SP_BUFFER_PREFIX_CONTEXT_DATA_ALIGN 45 46 #define DFLT_PORT_CUT_BYTES_FROM_END 4 47 48 #define DFLT_PORT_ERRORS_TO_DISCARD FM_PORT_FRM_ERR_CLS_DISCARD 49 #define DFLT_PORT_MAX_FRAME_LENGTH 9600 50 51 #define DFLT_PORT_RX_FIFO_PRI_ELEVATION_LEV(bmi_max_fifo_size) \ 52 MAX_PORT_FIFO_SIZE(bmi_max_fifo_size) 53 54 #define DFLT_PORT_RX_FIFO_THRESHOLD(major, bmi_max_fifo_size) \ 55 (major == 6 ? \ 56 MAX_PORT_FIFO_SIZE(bmi_max_fifo_size) : \ 57 (MAX_PORT_FIFO_SIZE(bmi_max_fifo_size) * 3 / 4)) \ 58 59 #define DFLT_PORT_EXTRA_NUM_OF_FIFO_BUFS 0 60 61 /* QMI defines */ 62 #define QMI_DEQ_CFG_SUBPORTAL_MASK 0x1f 63 64 #define QMI_PORT_CFG_EN 0x80000000 65 #define QMI_PORT_STATUS_DEQ_FD_BSY 0x20000000 66 67 #define QMI_DEQ_CFG_PRI 0x80000000 68 #define QMI_DEQ_CFG_TYPE1 0x10000000 69 #define QMI_DEQ_CFG_TYPE2 0x20000000 70 #define QMI_DEQ_CFG_TYPE3 0x30000000 71 #define QMI_DEQ_CFG_PREFETCH_PARTIAL 0x01000000 72 #define QMI_DEQ_CFG_PREFETCH_FULL 0x03000000 73 #define QMI_DEQ_CFG_SP_MASK 0xf 74 #define QMI_DEQ_CFG_SP_SHIFT 20 75 76 #define QMI_BYTE_COUNT_LEVEL_CONTROL(_type) \ 77 (_type == FMAN_PORT_TYPE_TX ? 0x1400 : 0x400) 78 79 /* BMI defins */ 80 #define BMI_EBD_EN 0x80000000 81 82 #define BMI_PORT_CFG_EN 0x80000000 83 84 #define BMI_PORT_STATUS_BSY 0x80000000 85 86 #define BMI_DMA_ATTR_SWP_SHIFT FMAN_SP_DMA_ATTR_SWP_SHIFT 87 #define BMI_DMA_ATTR_WRITE_OPTIMIZE FMAN_SP_DMA_ATTR_WRITE_OPTIMIZE 88 89 #define BMI_RX_FIFO_PRI_ELEVATION_SHIFT 16 90 #define BMI_RX_FIFO_THRESHOLD_ETHE 0x80000000 91 92 #define BMI_FRAME_END_CS_IGNORE_SHIFT 24 93 #define BMI_FRAME_END_CS_IGNORE_MASK 0x0000001f 94 95 #define BMI_RX_FRAME_END_CUT_SHIFT 16 96 #define BMI_RX_FRAME_END_CUT_MASK 0x0000001f 97 98 #define BMI_IC_TO_EXT_SHIFT FMAN_SP_IC_TO_EXT_SHIFT 99 #define BMI_IC_TO_EXT_MASK 0x0000001f 100 #define BMI_IC_FROM_INT_SHIFT FMAN_SP_IC_FROM_INT_SHIFT 101 #define BMI_IC_FROM_INT_MASK 0x0000000f 102 #define BMI_IC_SIZE_MASK 0x0000001f 103 104 #define BMI_INT_BUF_MARG_SHIFT 28 105 #define BMI_INT_BUF_MARG_MASK 0x0000000f 106 #define BMI_EXT_BUF_MARG_START_SHIFT FMAN_SP_EXT_BUF_MARG_START_SHIFT 107 #define BMI_EXT_BUF_MARG_START_MASK 0x000001ff 108 #define BMI_EXT_BUF_MARG_END_MASK 0x000001ff 109 110 #define BMI_CMD_MR_LEAC 0x00200000 111 #define BMI_CMD_MR_SLEAC 0x00100000 112 #define BMI_CMD_MR_MA 0x00080000 113 #define BMI_CMD_MR_DEAS 0x00040000 114 #define BMI_CMD_RX_MR_DEF (BMI_CMD_MR_LEAC | \ 115 BMI_CMD_MR_SLEAC | \ 116 BMI_CMD_MR_MA | \ 117 BMI_CMD_MR_DEAS) 118 #define BMI_CMD_TX_MR_DEF 0 119 120 #define BMI_CMD_ATTR_ORDER 0x80000000 121 #define BMI_CMD_ATTR_SYNC 0x02000000 122 #define BMI_CMD_ATTR_COLOR_SHIFT 26 123 124 #define BMI_FIFO_PIPELINE_DEPTH_SHIFT 12 125 #define BMI_FIFO_PIPELINE_DEPTH_MASK 0x0000000f 126 #define BMI_NEXT_ENG_FD_BITS_SHIFT 24 127 128 #define BMI_EXT_BUF_POOL_VALID FMAN_SP_EXT_BUF_POOL_VALID 129 #define BMI_EXT_BUF_POOL_EN_COUNTER FMAN_SP_EXT_BUF_POOL_EN_COUNTER 130 #define BMI_EXT_BUF_POOL_BACKUP FMAN_SP_EXT_BUF_POOL_BACKUP 131 #define BMI_EXT_BUF_POOL_ID_SHIFT 16 132 #define BMI_EXT_BUF_POOL_ID_MASK 0x003F0000 133 #define BMI_POOL_DEP_NUM_OF_POOLS_SHIFT 16 134 135 #define BMI_TX_FIFO_MIN_FILL_SHIFT 16 136 137 #define BMI_PRIORITY_ELEVATION_LEVEL ((0x3FF + 1) * PORT_BMI_FIFO_UNITS) 138 #define BMI_FIFO_THRESHOLD ((0x3FF + 1) * PORT_BMI_FIFO_UNITS) 139 140 #define BMI_DEQUEUE_PIPELINE_DEPTH(_type, _speed) \ 141 ((_type == FMAN_PORT_TYPE_TX && _speed == 10000) ? 4 : 1) 142 143 #define RX_ERRS_TO_ENQ \ 144 (FM_PORT_FRM_ERR_DMA | \ 145 FM_PORT_FRM_ERR_PHYSICAL | \ 146 FM_PORT_FRM_ERR_SIZE | \ 147 FM_PORT_FRM_ERR_EXTRACTION | \ 148 FM_PORT_FRM_ERR_NO_SCHEME | \ 149 FM_PORT_FRM_ERR_PRS_TIMEOUT | \ 150 FM_PORT_FRM_ERR_PRS_ILL_INSTRUCT | \ 151 FM_PORT_FRM_ERR_BLOCK_LIMIT_EXCEEDED | \ 152 FM_PORT_FRM_ERR_PRS_HDR_ERR | \ 153 FM_PORT_FRM_ERR_KEYSIZE_OVERFLOW | \ 154 FM_PORT_FRM_ERR_IPRE) 155 156 /* NIA defines */ 157 #define NIA_ORDER_RESTOR 0x00800000 158 #define NIA_ENG_BMI 0x00500000 159 #define NIA_ENG_QMI_ENQ 0x00540000 160 #define NIA_ENG_QMI_DEQ 0x00580000 161 #define NIA_ENG_HWP 0x00440000 162 #define NIA_ENG_HWK 0x00480000 163 #define NIA_BMI_AC_ENQ_FRAME 0x00000002 164 #define NIA_BMI_AC_TX_RELEASE 0x000002C0 165 #define NIA_BMI_AC_RELEASE 0x000000C0 166 #define NIA_BMI_AC_TX 0x00000274 167 #define NIA_BMI_AC_FETCH_ALL_FRAME 0x0000020c 168 169 /* Port IDs */ 170 #define TX_10G_PORT_BASE 0x30 171 #define RX_10G_PORT_BASE 0x10 172 173 /* BMI Rx port register map */ 174 struct fman_port_rx_bmi_regs { 175 u32 fmbm_rcfg; /* Rx Configuration */ 176 u32 fmbm_rst; /* Rx Status */ 177 u32 fmbm_rda; /* Rx DMA attributes */ 178 u32 fmbm_rfp; /* Rx FIFO Parameters */ 179 u32 fmbm_rfed; /* Rx Frame End Data */ 180 u32 fmbm_ricp; /* Rx Internal Context Parameters */ 181 u32 fmbm_rim; /* Rx Internal Buffer Margins */ 182 u32 fmbm_rebm; /* Rx External Buffer Margins */ 183 u32 fmbm_rfne; /* Rx Frame Next Engine */ 184 u32 fmbm_rfca; /* Rx Frame Command Attributes. */ 185 u32 fmbm_rfpne; /* Rx Frame Parser Next Engine */ 186 u32 fmbm_rpso; /* Rx Parse Start Offset */ 187 u32 fmbm_rpp; /* Rx Policer Profile */ 188 u32 fmbm_rccb; /* Rx Coarse Classification Base */ 189 u32 fmbm_reth; /* Rx Excessive Threshold */ 190 u32 reserved003c[1]; /* (0x03C 0x03F) */ 191 u32 fmbm_rprai[PORT_PRS_RESULT_WORDS_NUM]; 192 /* Rx Parse Results Array Init */ 193 u32 fmbm_rfqid; /* Rx Frame Queue ID */ 194 u32 fmbm_refqid; /* Rx Error Frame Queue ID */ 195 u32 fmbm_rfsdm; /* Rx Frame Status Discard Mask */ 196 u32 fmbm_rfsem; /* Rx Frame Status Error Mask */ 197 u32 fmbm_rfene; /* Rx Frame Enqueue Next Engine */ 198 u32 reserved0074[0x2]; /* (0x074-0x07C) */ 199 u32 fmbm_rcmne; /* Rx Frame Continuous Mode Next Engine */ 200 u32 reserved0080[0x20]; /* (0x080 0x0FF) */ 201 u32 fmbm_ebmpi[FMAN_PORT_MAX_EXT_POOLS_NUM]; 202 /* Buffer Manager pool Information- */ 203 u32 fmbm_acnt[FMAN_PORT_MAX_EXT_POOLS_NUM]; /* Allocate Counter- */ 204 u32 reserved0130[8]; /* 0x130/0x140 - 0x15F reserved - */ 205 u32 fmbm_rcgm[PORT_CG_MAP_NUM]; /* Congestion Group Map */ 206 u32 fmbm_mpd; /* BM Pool Depletion */ 207 u32 reserved0184[0x1F]; /* (0x184 0x1FF) */ 208 u32 fmbm_rstc; /* Rx Statistics Counters */ 209 u32 fmbm_rfrc; /* Rx Frame Counter */ 210 u32 fmbm_rfbc; /* Rx Bad Frames Counter */ 211 u32 fmbm_rlfc; /* Rx Large Frames Counter */ 212 u32 fmbm_rffc; /* Rx Filter Frames Counter */ 213 u32 fmbm_rfdc; /* Rx Frame Discard Counter */ 214 u32 fmbm_rfldec; /* Rx Frames List DMA Error Counter */ 215 u32 fmbm_rodc; /* Rx Out of Buffers Discard nntr */ 216 u32 fmbm_rbdc; /* Rx Buffers Deallocate Counter */ 217 u32 fmbm_rpec; /* RX Prepare to enqueue Counte */ 218 u32 reserved0224[0x16]; /* (0x224 0x27F) */ 219 u32 fmbm_rpc; /* Rx Performance Counters */ 220 u32 fmbm_rpcp; /* Rx Performance Count Parameters */ 221 u32 fmbm_rccn; /* Rx Cycle Counter */ 222 u32 fmbm_rtuc; /* Rx Tasks Utilization Counter */ 223 u32 fmbm_rrquc; /* Rx Receive Queue Utilization cntr */ 224 u32 fmbm_rduc; /* Rx DMA Utilization Counter */ 225 u32 fmbm_rfuc; /* Rx FIFO Utilization Counter */ 226 u32 fmbm_rpac; /* Rx Pause Activation Counter */ 227 u32 reserved02a0[0x18]; /* (0x2A0 0x2FF) */ 228 u32 fmbm_rdcfg[0x3]; /* Rx Debug Configuration */ 229 u32 fmbm_rgpr; /* Rx General Purpose Register */ 230 u32 reserved0310[0x3a]; 231 }; 232 233 /* BMI Tx port register map */ 234 struct fman_port_tx_bmi_regs { 235 u32 fmbm_tcfg; /* Tx Configuration */ 236 u32 fmbm_tst; /* Tx Status */ 237 u32 fmbm_tda; /* Tx DMA attributes */ 238 u32 fmbm_tfp; /* Tx FIFO Parameters */ 239 u32 fmbm_tfed; /* Tx Frame End Data */ 240 u32 fmbm_ticp; /* Tx Internal Context Parameters */ 241 u32 fmbm_tfdne; /* Tx Frame Dequeue Next Engine. */ 242 u32 fmbm_tfca; /* Tx Frame Command attribute. */ 243 u32 fmbm_tcfqid; /* Tx Confirmation Frame Queue ID. */ 244 u32 fmbm_tefqid; /* Tx Frame Error Queue ID */ 245 u32 fmbm_tfene; /* Tx Frame Enqueue Next Engine */ 246 u32 fmbm_trlmts; /* Tx Rate Limiter Scale */ 247 u32 fmbm_trlmt; /* Tx Rate Limiter */ 248 u32 reserved0034[0x0e]; /* (0x034-0x6c) */ 249 u32 fmbm_tccb; /* Tx Coarse Classification base */ 250 u32 fmbm_tfne; /* Tx Frame Next Engine */ 251 u32 fmbm_tpfcm[0x02]; 252 /* Tx Priority based Flow Control (PFC) Mapping */ 253 u32 fmbm_tcmne; /* Tx Frame Continuous Mode Next Engine */ 254 u32 reserved0080[0x60]; /* (0x080-0x200) */ 255 u32 fmbm_tstc; /* Tx Statistics Counters */ 256 u32 fmbm_tfrc; /* Tx Frame Counter */ 257 u32 fmbm_tfdc; /* Tx Frames Discard Counter */ 258 u32 fmbm_tfledc; /* Tx Frame len error discard cntr */ 259 u32 fmbm_tfufdc; /* Tx Frame unsprt frmt discard cntr */ 260 u32 fmbm_tbdc; /* Tx Buffers Deallocate Counter */ 261 u32 reserved0218[0x1A]; /* (0x218-0x280) */ 262 u32 fmbm_tpc; /* Tx Performance Counters */ 263 u32 fmbm_tpcp; /* Tx Performance Count Parameters */ 264 u32 fmbm_tccn; /* Tx Cycle Counter */ 265 u32 fmbm_ttuc; /* Tx Tasks Utilization Counter */ 266 u32 fmbm_ttcquc; /* Tx Transmit conf Q util Counter */ 267 u32 fmbm_tduc; /* Tx DMA Utilization Counter */ 268 u32 fmbm_tfuc; /* Tx FIFO Utilization Counter */ 269 u32 reserved029c[16]; /* (0x29C-0x2FF) */ 270 u32 fmbm_tdcfg[0x3]; /* Tx Debug Configuration */ 271 u32 fmbm_tgpr; /* Tx General Purpose Register */ 272 u32 reserved0310[0x3a]; /* (0x310-0x3FF) */ 273 }; 274 275 /* BMI port register map */ 276 union fman_port_bmi_regs { 277 struct fman_port_rx_bmi_regs rx; 278 struct fman_port_tx_bmi_regs tx; 279 }; 280 281 /* QMI port register map */ 282 struct fman_port_qmi_regs { 283 u32 fmqm_pnc; /* PortID n Configuration Register */ 284 u32 fmqm_pns; /* PortID n Status Register */ 285 u32 fmqm_pnts; /* PortID n Task Status Register */ 286 u32 reserved00c[4]; /* 0xn00C - 0xn01B */ 287 u32 fmqm_pnen; /* PortID n Enqueue NIA Register */ 288 u32 fmqm_pnetfc; /* PortID n Enq Total Frame Counter */ 289 u32 reserved024[2]; /* 0xn024 - 0x02B */ 290 u32 fmqm_pndn; /* PortID n Dequeue NIA Register */ 291 u32 fmqm_pndc; /* PortID n Dequeue Config Register */ 292 u32 fmqm_pndtfc; /* PortID n Dequeue tot Frame cntr */ 293 u32 fmqm_pndfdc; /* PortID n Dequeue FQID Dflt Cntr */ 294 u32 fmqm_pndcc; /* PortID n Dequeue Confirm Counter */ 295 }; 296 297 #define HWP_HXS_COUNT 16 298 #define HWP_HXS_PHE_REPORT 0x00000800 299 #define HWP_HXS_PCAC_PSTAT 0x00000100 300 #define HWP_HXS_PCAC_PSTOP 0x00000001 301 #define HWP_HXS_TCP_OFFSET 0xA 302 #define HWP_HXS_UDP_OFFSET 0xB 303 #define HWP_HXS_SH_PAD_REM 0x80000000 304 305 struct fman_port_hwp_regs { 306 struct { 307 u32 ssa; /* Soft Sequence Attachment */ 308 u32 lcv; /* Line-up Enable Confirmation Mask */ 309 } pmda[HWP_HXS_COUNT]; /* Parse Memory Direct Access Registers */ 310 u32 reserved080[(0x3f8 - 0x080) / 4]; /* (0x080-0x3f7) */ 311 u32 fmpr_pcac; /* Configuration Access Control */ 312 }; 313 314 /* QMI dequeue prefetch modes */ 315 enum fman_port_deq_prefetch { 316 FMAN_PORT_DEQ_NO_PREFETCH, /* No prefetch mode */ 317 FMAN_PORT_DEQ_PART_PREFETCH, /* Partial prefetch mode */ 318 FMAN_PORT_DEQ_FULL_PREFETCH /* Full prefetch mode */ 319 }; 320 321 /* A structure for defining FM port resources */ 322 struct fman_port_rsrc { 323 u32 num; /* Committed required resource */ 324 u32 extra; /* Extra (not committed) required resource */ 325 }; 326 327 enum fman_port_dma_swap { 328 FMAN_PORT_DMA_NO_SWAP, /* No swap, transfer data as is */ 329 FMAN_PORT_DMA_SWAP_LE, 330 /* The transferred data should be swapped in PPC Little Endian mode */ 331 FMAN_PORT_DMA_SWAP_BE 332 /* The transferred data should be swapped in Big Endian mode */ 333 }; 334 335 /* Default port color */ 336 enum fman_port_color { 337 FMAN_PORT_COLOR_GREEN, /* Default port color is green */ 338 FMAN_PORT_COLOR_YELLOW, /* Default port color is yellow */ 339 FMAN_PORT_COLOR_RED, /* Default port color is red */ 340 FMAN_PORT_COLOR_OVERRIDE /* Ignore color */ 341 }; 342 343 /* QMI dequeue from the SP channel - types */ 344 enum fman_port_deq_type { 345 FMAN_PORT_DEQ_BY_PRI, 346 /* Priority precedence and Intra-Class scheduling */ 347 FMAN_PORT_DEQ_ACTIVE_FQ, 348 /* Active FQ precedence and Intra-Class scheduling */ 349 FMAN_PORT_DEQ_ACTIVE_FQ_NO_ICS 350 /* Active FQ precedence and override Intra-Class scheduling */ 351 }; 352 353 /* External buffer pools configuration */ 354 struct fman_port_bpools { 355 u8 count; /* Num of pools to set up */ 356 bool counters_enable; /* Enable allocate counters */ 357 u8 grp_bp_depleted_num; 358 /* Number of depleted pools - if reached the BMI indicates 359 * the MAC to send a pause frame 360 */ 361 struct { 362 u8 bpid; /* BM pool ID */ 363 u16 size; 364 /* Pool's size - must be in ascending order */ 365 bool is_backup; 366 /* If this is a backup pool */ 367 bool grp_bp_depleted; 368 /* Consider this buffer in multiple pools depletion criteria */ 369 bool single_bp_depleted; 370 /* Consider this buffer in single pool depletion criteria */ 371 } bpool[FMAN_PORT_MAX_EXT_POOLS_NUM]; 372 }; 373 374 struct fman_port_cfg { 375 u32 dflt_fqid; 376 u32 err_fqid; 377 u32 pcd_base_fqid; 378 u32 pcd_fqs_count; 379 u8 deq_sp; 380 bool deq_high_priority; 381 enum fman_port_deq_type deq_type; 382 enum fman_port_deq_prefetch deq_prefetch_option; 383 u16 deq_byte_cnt; 384 u8 cheksum_last_bytes_ignore; 385 u8 rx_cut_end_bytes; 386 struct fman_buf_pool_depletion buf_pool_depletion; 387 struct fman_ext_pools ext_buf_pools; 388 u32 tx_fifo_min_level; 389 u32 tx_fifo_low_comf_level; 390 u32 rx_pri_elevation; 391 u32 rx_fifo_thr; 392 struct fman_sp_buf_margins buf_margins; 393 u32 int_buf_start_margin; 394 struct fman_sp_int_context_data_copy int_context; 395 u32 discard_mask; 396 u32 err_mask; 397 struct fman_buffer_prefix_content buffer_prefix_content; 398 bool dont_release_buf; 399 400 u8 rx_fd_bits; 401 u32 tx_fifo_deq_pipeline_depth; 402 bool errata_A006320; 403 bool excessive_threshold_register; 404 bool fmbm_tfne_has_features; 405 406 enum fman_port_dma_swap dma_swap_data; 407 enum fman_port_color color; 408 }; 409 410 struct fman_port_rx_pools_params { 411 u8 num_of_pools; 412 u16 largest_buf_size; 413 }; 414 415 struct fman_port_dts_params { 416 void __iomem *base_addr; /* FMan port virtual memory */ 417 enum fman_port_type type; /* Port type */ 418 u16 speed; /* Port speed */ 419 u8 id; /* HW Port Id */ 420 u32 qman_channel_id; /* QMan channel id (non RX only) */ 421 struct fman *fman; /* FMan Handle */ 422 }; 423 424 struct fman_port { 425 void *fm; 426 struct device *dev; 427 struct fman_rev_info rev_info; 428 u8 port_id; 429 enum fman_port_type port_type; 430 u16 port_speed; 431 432 union fman_port_bmi_regs __iomem *bmi_regs; 433 struct fman_port_qmi_regs __iomem *qmi_regs; 434 struct fman_port_hwp_regs __iomem *hwp_regs; 435 436 struct fman_sp_buffer_offsets buffer_offsets; 437 438 u8 internal_buf_offset; 439 struct fman_ext_pools ext_buf_pools; 440 441 u16 max_frame_length; 442 struct fman_port_rsrc open_dmas; 443 struct fman_port_rsrc tasks; 444 struct fman_port_rsrc fifo_bufs; 445 struct fman_port_rx_pools_params rx_pools_params; 446 447 struct fman_port_cfg *cfg; 448 struct fman_port_dts_params dts_params; 449 450 u8 ext_pools_num; 451 u32 max_port_fifo_size; 452 u32 max_num_of_ext_pools; 453 u32 max_num_of_sub_portals; 454 u32 bm_max_num_of_pools; 455 }; 456 457 static int init_bmi_rx(struct fman_port *port) 458 { 459 struct fman_port_rx_bmi_regs __iomem *regs = &port->bmi_regs->rx; 460 struct fman_port_cfg *cfg = port->cfg; 461 u32 tmp; 462 463 /* DMA attributes */ 464 tmp = (u32)cfg->dma_swap_data << BMI_DMA_ATTR_SWP_SHIFT; 465 /* Enable write optimization */ 466 tmp |= BMI_DMA_ATTR_WRITE_OPTIMIZE; 467 iowrite32be(tmp, ®s->fmbm_rda); 468 469 /* Rx FIFO parameters */ 470 tmp = (cfg->rx_pri_elevation / PORT_BMI_FIFO_UNITS - 1) << 471 BMI_RX_FIFO_PRI_ELEVATION_SHIFT; 472 tmp |= cfg->rx_fifo_thr / PORT_BMI_FIFO_UNITS - 1; 473 iowrite32be(tmp, ®s->fmbm_rfp); 474 475 if (cfg->excessive_threshold_register) 476 /* always allow access to the extra resources */ 477 iowrite32be(BMI_RX_FIFO_THRESHOLD_ETHE, ®s->fmbm_reth); 478 479 /* Frame end data */ 480 tmp = (cfg->cheksum_last_bytes_ignore & BMI_FRAME_END_CS_IGNORE_MASK) << 481 BMI_FRAME_END_CS_IGNORE_SHIFT; 482 tmp |= (cfg->rx_cut_end_bytes & BMI_RX_FRAME_END_CUT_MASK) << 483 BMI_RX_FRAME_END_CUT_SHIFT; 484 if (cfg->errata_A006320) 485 tmp &= 0xffe0ffff; 486 iowrite32be(tmp, ®s->fmbm_rfed); 487 488 /* Internal context parameters */ 489 tmp = ((cfg->int_context.ext_buf_offset / PORT_IC_OFFSET_UNITS) & 490 BMI_IC_TO_EXT_MASK) << BMI_IC_TO_EXT_SHIFT; 491 tmp |= ((cfg->int_context.int_context_offset / PORT_IC_OFFSET_UNITS) & 492 BMI_IC_FROM_INT_MASK) << BMI_IC_FROM_INT_SHIFT; 493 tmp |= (cfg->int_context.size / PORT_IC_OFFSET_UNITS) & 494 BMI_IC_SIZE_MASK; 495 iowrite32be(tmp, ®s->fmbm_ricp); 496 497 /* Internal buffer offset */ 498 tmp = ((cfg->int_buf_start_margin / PORT_IC_OFFSET_UNITS) & 499 BMI_INT_BUF_MARG_MASK) << BMI_INT_BUF_MARG_SHIFT; 500 iowrite32be(tmp, ®s->fmbm_rim); 501 502 /* External buffer margins */ 503 tmp = (cfg->buf_margins.start_margins & BMI_EXT_BUF_MARG_START_MASK) << 504 BMI_EXT_BUF_MARG_START_SHIFT; 505 tmp |= cfg->buf_margins.end_margins & BMI_EXT_BUF_MARG_END_MASK; 506 iowrite32be(tmp, ®s->fmbm_rebm); 507 508 /* Frame attributes */ 509 tmp = BMI_CMD_RX_MR_DEF; 510 tmp |= BMI_CMD_ATTR_ORDER; 511 tmp |= (u32)cfg->color << BMI_CMD_ATTR_COLOR_SHIFT; 512 /* Synchronization request */ 513 tmp |= BMI_CMD_ATTR_SYNC; 514 515 iowrite32be(tmp, ®s->fmbm_rfca); 516 517 /* NIA */ 518 tmp = (u32)cfg->rx_fd_bits << BMI_NEXT_ENG_FD_BITS_SHIFT; 519 520 tmp |= NIA_ENG_HWP; 521 iowrite32be(tmp, ®s->fmbm_rfne); 522 523 /* Parser Next Engine NIA */ 524 iowrite32be(NIA_ENG_BMI | NIA_BMI_AC_ENQ_FRAME, ®s->fmbm_rfpne); 525 526 /* Enqueue NIA */ 527 iowrite32be(NIA_ENG_QMI_ENQ | NIA_ORDER_RESTOR, ®s->fmbm_rfene); 528 529 /* Default/error queues */ 530 iowrite32be((cfg->dflt_fqid & DFLT_FQ_ID), ®s->fmbm_rfqid); 531 iowrite32be((cfg->err_fqid & DFLT_FQ_ID), ®s->fmbm_refqid); 532 533 /* Discard/error masks */ 534 iowrite32be(cfg->discard_mask, ®s->fmbm_rfsdm); 535 iowrite32be(cfg->err_mask, ®s->fmbm_rfsem); 536 537 return 0; 538 } 539 540 static int init_bmi_tx(struct fman_port *port) 541 { 542 struct fman_port_tx_bmi_regs __iomem *regs = &port->bmi_regs->tx; 543 struct fman_port_cfg *cfg = port->cfg; 544 u32 tmp; 545 546 /* Tx Configuration register */ 547 tmp = 0; 548 iowrite32be(tmp, ®s->fmbm_tcfg); 549 550 /* DMA attributes */ 551 tmp = (u32)cfg->dma_swap_data << BMI_DMA_ATTR_SWP_SHIFT; 552 iowrite32be(tmp, ®s->fmbm_tda); 553 554 /* Tx FIFO parameters */ 555 tmp = (cfg->tx_fifo_min_level / PORT_BMI_FIFO_UNITS) << 556 BMI_TX_FIFO_MIN_FILL_SHIFT; 557 tmp |= ((cfg->tx_fifo_deq_pipeline_depth - 1) & 558 BMI_FIFO_PIPELINE_DEPTH_MASK) << BMI_FIFO_PIPELINE_DEPTH_SHIFT; 559 tmp |= (cfg->tx_fifo_low_comf_level / PORT_BMI_FIFO_UNITS) - 1; 560 iowrite32be(tmp, ®s->fmbm_tfp); 561 562 /* Frame end data */ 563 tmp = (cfg->cheksum_last_bytes_ignore & BMI_FRAME_END_CS_IGNORE_MASK) << 564 BMI_FRAME_END_CS_IGNORE_SHIFT; 565 iowrite32be(tmp, ®s->fmbm_tfed); 566 567 /* Internal context parameters */ 568 tmp = ((cfg->int_context.ext_buf_offset / PORT_IC_OFFSET_UNITS) & 569 BMI_IC_TO_EXT_MASK) << BMI_IC_TO_EXT_SHIFT; 570 tmp |= ((cfg->int_context.int_context_offset / PORT_IC_OFFSET_UNITS) & 571 BMI_IC_FROM_INT_MASK) << BMI_IC_FROM_INT_SHIFT; 572 tmp |= (cfg->int_context.size / PORT_IC_OFFSET_UNITS) & 573 BMI_IC_SIZE_MASK; 574 iowrite32be(tmp, ®s->fmbm_ticp); 575 576 /* Frame attributes */ 577 tmp = BMI_CMD_TX_MR_DEF; 578 tmp |= BMI_CMD_ATTR_ORDER; 579 tmp |= (u32)cfg->color << BMI_CMD_ATTR_COLOR_SHIFT; 580 iowrite32be(tmp, ®s->fmbm_tfca); 581 582 /* Dequeue NIA + enqueue NIA */ 583 iowrite32be(NIA_ENG_QMI_DEQ, ®s->fmbm_tfdne); 584 iowrite32be(NIA_ENG_QMI_ENQ | NIA_ORDER_RESTOR, ®s->fmbm_tfene); 585 if (cfg->fmbm_tfne_has_features) 586 iowrite32be(!cfg->dflt_fqid ? 587 BMI_EBD_EN | NIA_BMI_AC_FETCH_ALL_FRAME : 588 NIA_BMI_AC_FETCH_ALL_FRAME, ®s->fmbm_tfne); 589 if (!cfg->dflt_fqid && cfg->dont_release_buf) { 590 iowrite32be(DFLT_FQ_ID, ®s->fmbm_tcfqid); 591 iowrite32be(NIA_ENG_BMI | NIA_BMI_AC_TX_RELEASE, 592 ®s->fmbm_tfene); 593 if (cfg->fmbm_tfne_has_features) 594 iowrite32be(ioread32be(®s->fmbm_tfne) & ~BMI_EBD_EN, 595 ®s->fmbm_tfne); 596 } 597 598 /* Confirmation/error queues */ 599 if (cfg->dflt_fqid || !cfg->dont_release_buf) 600 iowrite32be(cfg->dflt_fqid & DFLT_FQ_ID, ®s->fmbm_tcfqid); 601 iowrite32be((cfg->err_fqid & DFLT_FQ_ID), ®s->fmbm_tefqid); 602 603 return 0; 604 } 605 606 static int init_qmi(struct fman_port *port) 607 { 608 struct fman_port_qmi_regs __iomem *regs = port->qmi_regs; 609 struct fman_port_cfg *cfg = port->cfg; 610 u32 tmp; 611 612 /* Rx port configuration */ 613 if (port->port_type == FMAN_PORT_TYPE_RX) { 614 /* Enqueue NIA */ 615 iowrite32be(NIA_ENG_BMI | NIA_BMI_AC_RELEASE, ®s->fmqm_pnen); 616 return 0; 617 } 618 619 /* Continue with Tx port configuration */ 620 if (port->port_type == FMAN_PORT_TYPE_TX) { 621 /* Enqueue NIA */ 622 iowrite32be(NIA_ENG_BMI | NIA_BMI_AC_TX_RELEASE, 623 ®s->fmqm_pnen); 624 /* Dequeue NIA */ 625 iowrite32be(NIA_ENG_BMI | NIA_BMI_AC_TX, ®s->fmqm_pndn); 626 } 627 628 /* Dequeue Configuration register */ 629 tmp = 0; 630 if (cfg->deq_high_priority) 631 tmp |= QMI_DEQ_CFG_PRI; 632 633 switch (cfg->deq_type) { 634 case FMAN_PORT_DEQ_BY_PRI: 635 tmp |= QMI_DEQ_CFG_TYPE1; 636 break; 637 case FMAN_PORT_DEQ_ACTIVE_FQ: 638 tmp |= QMI_DEQ_CFG_TYPE2; 639 break; 640 case FMAN_PORT_DEQ_ACTIVE_FQ_NO_ICS: 641 tmp |= QMI_DEQ_CFG_TYPE3; 642 break; 643 default: 644 return -EINVAL; 645 } 646 647 switch (cfg->deq_prefetch_option) { 648 case FMAN_PORT_DEQ_NO_PREFETCH: 649 break; 650 case FMAN_PORT_DEQ_PART_PREFETCH: 651 tmp |= QMI_DEQ_CFG_PREFETCH_PARTIAL; 652 break; 653 case FMAN_PORT_DEQ_FULL_PREFETCH: 654 tmp |= QMI_DEQ_CFG_PREFETCH_FULL; 655 break; 656 default: 657 return -EINVAL; 658 } 659 660 tmp |= (cfg->deq_sp & QMI_DEQ_CFG_SP_MASK) << QMI_DEQ_CFG_SP_SHIFT; 661 tmp |= cfg->deq_byte_cnt; 662 iowrite32be(tmp, ®s->fmqm_pndc); 663 664 return 0; 665 } 666 667 static void stop_port_hwp(struct fman_port *port) 668 { 669 struct fman_port_hwp_regs __iomem *regs = port->hwp_regs; 670 int cnt = 100; 671 672 iowrite32be(HWP_HXS_PCAC_PSTOP, ®s->fmpr_pcac); 673 674 while (cnt-- > 0 && 675 (ioread32be(®s->fmpr_pcac) & HWP_HXS_PCAC_PSTAT)) 676 udelay(10); 677 if (!cnt) 678 pr_err("Timeout stopping HW Parser\n"); 679 } 680 681 static void start_port_hwp(struct fman_port *port) 682 { 683 struct fman_port_hwp_regs __iomem *regs = port->hwp_regs; 684 int cnt = 100; 685 686 iowrite32be(0, ®s->fmpr_pcac); 687 688 while (cnt-- > 0 && 689 !(ioread32be(®s->fmpr_pcac) & HWP_HXS_PCAC_PSTAT)) 690 udelay(10); 691 if (!cnt) 692 pr_err("Timeout starting HW Parser\n"); 693 } 694 695 static void init_hwp(struct fman_port *port) 696 { 697 struct fman_port_hwp_regs __iomem *regs = port->hwp_regs; 698 int i; 699 700 stop_port_hwp(port); 701 702 for (i = 0; i < HWP_HXS_COUNT; i++) { 703 /* enable HXS error reporting into FD[STATUS] PHE */ 704 iowrite32be(0x00000000, ®s->pmda[i].ssa); 705 iowrite32be(0xffffffff, ®s->pmda[i].lcv); 706 } 707 708 /* Short packet padding removal from checksum calculation */ 709 iowrite32be(HWP_HXS_SH_PAD_REM, ®s->pmda[HWP_HXS_TCP_OFFSET].ssa); 710 iowrite32be(HWP_HXS_SH_PAD_REM, ®s->pmda[HWP_HXS_UDP_OFFSET].ssa); 711 712 start_port_hwp(port); 713 } 714 715 static int init(struct fman_port *port) 716 { 717 int err; 718 719 /* Init BMI registers */ 720 switch (port->port_type) { 721 case FMAN_PORT_TYPE_RX: 722 err = init_bmi_rx(port); 723 if (!err) 724 init_hwp(port); 725 break; 726 case FMAN_PORT_TYPE_TX: 727 err = init_bmi_tx(port); 728 break; 729 default: 730 return -EINVAL; 731 } 732 733 if (err) 734 return err; 735 736 /* Init QMI registers */ 737 err = init_qmi(port); 738 if (err) 739 return err; 740 741 return 0; 742 } 743 744 static int set_bpools(const struct fman_port *port, 745 const struct fman_port_bpools *bp) 746 { 747 u32 __iomem *bp_reg, *bp_depl_reg; 748 u32 tmp; 749 u8 i, max_bp_num; 750 bool grp_depl_used = false, rx_port; 751 752 switch (port->port_type) { 753 case FMAN_PORT_TYPE_RX: 754 max_bp_num = port->ext_pools_num; 755 rx_port = true; 756 bp_reg = port->bmi_regs->rx.fmbm_ebmpi; 757 bp_depl_reg = &port->bmi_regs->rx.fmbm_mpd; 758 break; 759 default: 760 return -EINVAL; 761 } 762 763 if (rx_port) { 764 /* Check buffers are provided in ascending order */ 765 for (i = 0; (i < (bp->count - 1) && 766 (i < FMAN_PORT_MAX_EXT_POOLS_NUM - 1)); i++) { 767 if (bp->bpool[i].size > bp->bpool[i + 1].size) 768 return -EINVAL; 769 } 770 } 771 772 /* Set up external buffers pools */ 773 for (i = 0; i < bp->count; i++) { 774 tmp = BMI_EXT_BUF_POOL_VALID; 775 tmp |= ((u32)bp->bpool[i].bpid << 776 BMI_EXT_BUF_POOL_ID_SHIFT) & BMI_EXT_BUF_POOL_ID_MASK; 777 778 if (rx_port) { 779 if (bp->counters_enable) 780 tmp |= BMI_EXT_BUF_POOL_EN_COUNTER; 781 782 if (bp->bpool[i].is_backup) 783 tmp |= BMI_EXT_BUF_POOL_BACKUP; 784 785 tmp |= (u32)bp->bpool[i].size; 786 } 787 788 iowrite32be(tmp, &bp_reg[i]); 789 } 790 791 /* Clear unused pools */ 792 for (i = bp->count; i < max_bp_num; i++) 793 iowrite32be(0, &bp_reg[i]); 794 795 /* Pools depletion */ 796 tmp = 0; 797 for (i = 0; i < FMAN_PORT_MAX_EXT_POOLS_NUM; i++) { 798 if (bp->bpool[i].grp_bp_depleted) { 799 grp_depl_used = true; 800 tmp |= 0x80000000 >> i; 801 } 802 803 if (bp->bpool[i].single_bp_depleted) 804 tmp |= 0x80 >> i; 805 } 806 807 if (grp_depl_used) 808 tmp |= ((u32)bp->grp_bp_depleted_num - 1) << 809 BMI_POOL_DEP_NUM_OF_POOLS_SHIFT; 810 811 iowrite32be(tmp, bp_depl_reg); 812 return 0; 813 } 814 815 static bool is_init_done(struct fman_port_cfg *cfg) 816 { 817 /* Checks if FMan port driver parameters were initialized */ 818 if (!cfg) 819 return true; 820 821 return false; 822 } 823 824 static int verify_size_of_fifo(struct fman_port *port) 825 { 826 u32 min_fifo_size_required = 0, opt_fifo_size_for_b2b = 0; 827 828 /* TX Ports */ 829 if (port->port_type == FMAN_PORT_TYPE_TX) { 830 min_fifo_size_required = (u32) 831 (roundup(port->max_frame_length, 832 FMAN_BMI_FIFO_UNITS) + (3 * FMAN_BMI_FIFO_UNITS)); 833 834 min_fifo_size_required += 835 port->cfg->tx_fifo_deq_pipeline_depth * 836 FMAN_BMI_FIFO_UNITS; 837 838 opt_fifo_size_for_b2b = min_fifo_size_required; 839 840 /* Add some margin for back-to-back capability to improve 841 * performance, allows the hardware to pipeline new frame dma 842 * while the previous frame not yet transmitted. 843 */ 844 if (port->port_speed == 10000) 845 opt_fifo_size_for_b2b += 3 * FMAN_BMI_FIFO_UNITS; 846 else 847 opt_fifo_size_for_b2b += 2 * FMAN_BMI_FIFO_UNITS; 848 } 849 850 /* RX Ports */ 851 else if (port->port_type == FMAN_PORT_TYPE_RX) { 852 if (port->rev_info.major >= 6) 853 min_fifo_size_required = (u32) 854 (roundup(port->max_frame_length, 855 FMAN_BMI_FIFO_UNITS) + 856 (5 * FMAN_BMI_FIFO_UNITS)); 857 /* 4 according to spec + 1 for FOF>0 */ 858 else 859 min_fifo_size_required = (u32) 860 (roundup(min(port->max_frame_length, 861 port->rx_pools_params.largest_buf_size), 862 FMAN_BMI_FIFO_UNITS) + 863 (7 * FMAN_BMI_FIFO_UNITS)); 864 865 opt_fifo_size_for_b2b = min_fifo_size_required; 866 867 /* Add some margin for back-to-back capability to improve 868 * performance,allows the hardware to pipeline new frame dma 869 * while the previous frame not yet transmitted. 870 */ 871 if (port->port_speed == 10000) 872 opt_fifo_size_for_b2b += 8 * FMAN_BMI_FIFO_UNITS; 873 else 874 opt_fifo_size_for_b2b += 3 * FMAN_BMI_FIFO_UNITS; 875 } 876 877 WARN_ON(min_fifo_size_required <= 0); 878 WARN_ON(opt_fifo_size_for_b2b < min_fifo_size_required); 879 880 /* Verify the size */ 881 if (port->fifo_bufs.num < min_fifo_size_required) 882 dev_dbg(port->dev, "%s: FIFO size should be enlarged to %d bytes\n", 883 __func__, min_fifo_size_required); 884 else if (port->fifo_bufs.num < opt_fifo_size_for_b2b) 885 dev_dbg(port->dev, "%s: For b2b processing,FIFO may be enlarged to %d bytes\n", 886 __func__, opt_fifo_size_for_b2b); 887 888 return 0; 889 } 890 891 static int set_ext_buffer_pools(struct fman_port *port) 892 { 893 struct fman_ext_pools *ext_buf_pools = &port->cfg->ext_buf_pools; 894 struct fman_buf_pool_depletion *buf_pool_depletion = 895 &port->cfg->buf_pool_depletion; 896 u8 ordered_array[FMAN_PORT_MAX_EXT_POOLS_NUM]; 897 u16 sizes_array[BM_MAX_NUM_OF_POOLS]; 898 int i = 0, j = 0, err; 899 struct fman_port_bpools bpools; 900 901 memset(&ordered_array, 0, sizeof(u8) * FMAN_PORT_MAX_EXT_POOLS_NUM); 902 memset(&sizes_array, 0, sizeof(u16) * BM_MAX_NUM_OF_POOLS); 903 memcpy(&port->ext_buf_pools, ext_buf_pools, 904 sizeof(struct fman_ext_pools)); 905 906 fman_sp_set_buf_pools_in_asc_order_of_buf_sizes(ext_buf_pools, 907 ordered_array, 908 sizes_array); 909 910 memset(&bpools, 0, sizeof(struct fman_port_bpools)); 911 bpools.count = ext_buf_pools->num_of_pools_used; 912 bpools.counters_enable = true; 913 for (i = 0; i < ext_buf_pools->num_of_pools_used; i++) { 914 bpools.bpool[i].bpid = ordered_array[i]; 915 bpools.bpool[i].size = sizes_array[ordered_array[i]]; 916 } 917 918 /* save pools parameters for later use */ 919 port->rx_pools_params.num_of_pools = ext_buf_pools->num_of_pools_used; 920 port->rx_pools_params.largest_buf_size = 921 sizes_array[ordered_array[ext_buf_pools->num_of_pools_used - 1]]; 922 923 /* FMBM_RMPD reg. - pool depletion */ 924 if (buf_pool_depletion->pools_grp_mode_enable) { 925 bpools.grp_bp_depleted_num = buf_pool_depletion->num_of_pools; 926 for (i = 0; i < port->bm_max_num_of_pools; i++) { 927 if (buf_pool_depletion->pools_to_consider[i]) { 928 for (j = 0; j < ext_buf_pools-> 929 num_of_pools_used; j++) { 930 if (i == ordered_array[j]) { 931 bpools.bpool[j]. 932 grp_bp_depleted = true; 933 break; 934 } 935 } 936 } 937 } 938 } 939 940 if (buf_pool_depletion->single_pool_mode_enable) { 941 for (i = 0; i < port->bm_max_num_of_pools; i++) { 942 if (buf_pool_depletion-> 943 pools_to_consider_for_single_mode[i]) { 944 for (j = 0; j < ext_buf_pools-> 945 num_of_pools_used; j++) { 946 if (i == ordered_array[j]) { 947 bpools.bpool[j]. 948 single_bp_depleted = true; 949 break; 950 } 951 } 952 } 953 } 954 } 955 956 err = set_bpools(port, &bpools); 957 if (err != 0) { 958 dev_err(port->dev, "%s: set_bpools() failed\n", __func__); 959 return -EINVAL; 960 } 961 962 return 0; 963 } 964 965 static int init_low_level_driver(struct fman_port *port) 966 { 967 struct fman_port_cfg *cfg = port->cfg; 968 u32 tmp_val; 969 970 switch (port->port_type) { 971 case FMAN_PORT_TYPE_RX: 972 cfg->err_mask = (RX_ERRS_TO_ENQ & ~cfg->discard_mask); 973 break; 974 default: 975 break; 976 } 977 978 tmp_val = (u32)((port->internal_buf_offset % OFFSET_UNITS) ? 979 (port->internal_buf_offset / OFFSET_UNITS + 1) : 980 (port->internal_buf_offset / OFFSET_UNITS)); 981 port->internal_buf_offset = (u8)(tmp_val * OFFSET_UNITS); 982 port->cfg->int_buf_start_margin = port->internal_buf_offset; 983 984 if (init(port) != 0) { 985 dev_err(port->dev, "%s: fman port initialization failed\n", 986 __func__); 987 return -ENODEV; 988 } 989 990 /* The code bellow is a trick so the FM will not release the buffer 991 * to BM nor will try to enqueue the frame to QM 992 */ 993 if (port->port_type == FMAN_PORT_TYPE_TX) { 994 if (!cfg->dflt_fqid && cfg->dont_release_buf) { 995 /* override fmbm_tcfqid 0 with a false non-0 value. 996 * This will force FM to act according to tfene. 997 * Otherwise, if fmbm_tcfqid is 0 the FM will release 998 * buffers to BM regardless of fmbm_tfene 999 */ 1000 iowrite32be(0xFFFFFF, &port->bmi_regs->tx.fmbm_tcfqid); 1001 iowrite32be(NIA_ENG_BMI | NIA_BMI_AC_TX_RELEASE, 1002 &port->bmi_regs->tx.fmbm_tfene); 1003 } 1004 } 1005 1006 return 0; 1007 } 1008 1009 static int fill_soc_specific_params(struct fman_port *port) 1010 { 1011 u32 bmi_max_fifo_size; 1012 1013 bmi_max_fifo_size = fman_get_bmi_max_fifo_size(port->fm); 1014 port->max_port_fifo_size = MAX_PORT_FIFO_SIZE(bmi_max_fifo_size); 1015 port->bm_max_num_of_pools = 64; 1016 1017 /* P4080 - Major 2 1018 * P2041/P3041/P5020/P5040 - Major 3 1019 * Tx/Bx - Major 6 1020 */ 1021 switch (port->rev_info.major) { 1022 case 2: 1023 case 3: 1024 port->max_num_of_ext_pools = 4; 1025 port->max_num_of_sub_portals = 12; 1026 break; 1027 1028 case 6: 1029 port->max_num_of_ext_pools = 8; 1030 port->max_num_of_sub_portals = 16; 1031 break; 1032 1033 default: 1034 dev_err(port->dev, "%s: Unsupported FMan version\n", __func__); 1035 return -EINVAL; 1036 } 1037 1038 return 0; 1039 } 1040 1041 static int get_dflt_fifo_deq_pipeline_depth(u8 major, enum fman_port_type type, 1042 u16 speed) 1043 { 1044 switch (type) { 1045 case FMAN_PORT_TYPE_RX: 1046 case FMAN_PORT_TYPE_TX: 1047 switch (speed) { 1048 case 10000: 1049 return 4; 1050 case 1000: 1051 if (major >= 6) 1052 return 2; 1053 else 1054 return 1; 1055 default: 1056 return 0; 1057 } 1058 default: 1059 return 0; 1060 } 1061 } 1062 1063 static int get_dflt_num_of_tasks(u8 major, enum fman_port_type type, 1064 u16 speed) 1065 { 1066 switch (type) { 1067 case FMAN_PORT_TYPE_RX: 1068 case FMAN_PORT_TYPE_TX: 1069 switch (speed) { 1070 case 10000: 1071 return 16; 1072 case 1000: 1073 if (major >= 6) 1074 return 4; 1075 else 1076 return 3; 1077 default: 1078 return 0; 1079 } 1080 default: 1081 return 0; 1082 } 1083 } 1084 1085 static int get_dflt_extra_num_of_tasks(u8 major, enum fman_port_type type, 1086 u16 speed) 1087 { 1088 switch (type) { 1089 case FMAN_PORT_TYPE_RX: 1090 /* FMan V3 */ 1091 if (major >= 6) 1092 return 0; 1093 1094 /* FMan V2 */ 1095 if (speed == 10000) 1096 return 8; 1097 else 1098 return 2; 1099 case FMAN_PORT_TYPE_TX: 1100 default: 1101 return 0; 1102 } 1103 } 1104 1105 static int get_dflt_num_of_open_dmas(u8 major, enum fman_port_type type, 1106 u16 speed) 1107 { 1108 int val; 1109 1110 if (major >= 6) { 1111 switch (type) { 1112 case FMAN_PORT_TYPE_TX: 1113 if (speed == 10000) 1114 val = 12; 1115 else 1116 val = 3; 1117 break; 1118 case FMAN_PORT_TYPE_RX: 1119 if (speed == 10000) 1120 val = 8; 1121 else 1122 val = 2; 1123 break; 1124 default: 1125 return 0; 1126 } 1127 } else { 1128 switch (type) { 1129 case FMAN_PORT_TYPE_TX: 1130 case FMAN_PORT_TYPE_RX: 1131 if (speed == 10000) 1132 val = 8; 1133 else 1134 val = 1; 1135 break; 1136 default: 1137 val = 0; 1138 } 1139 } 1140 1141 return val; 1142 } 1143 1144 static int get_dflt_extra_num_of_open_dmas(u8 major, enum fman_port_type type, 1145 u16 speed) 1146 { 1147 /* FMan V3 */ 1148 if (major >= 6) 1149 return 0; 1150 1151 /* FMan V2 */ 1152 switch (type) { 1153 case FMAN_PORT_TYPE_RX: 1154 case FMAN_PORT_TYPE_TX: 1155 if (speed == 10000) 1156 return 8; 1157 else 1158 return 1; 1159 default: 1160 return 0; 1161 } 1162 } 1163 1164 static int get_dflt_num_of_fifo_bufs(u8 major, enum fman_port_type type, 1165 u16 speed) 1166 { 1167 int val; 1168 1169 if (major >= 6) { 1170 switch (type) { 1171 case FMAN_PORT_TYPE_TX: 1172 if (speed == 10000) 1173 val = 64; 1174 else 1175 val = 50; 1176 break; 1177 case FMAN_PORT_TYPE_RX: 1178 if (speed == 10000) 1179 val = 96; 1180 else 1181 val = 50; 1182 break; 1183 default: 1184 val = 0; 1185 } 1186 } else { 1187 switch (type) { 1188 case FMAN_PORT_TYPE_TX: 1189 if (speed == 10000) 1190 val = 48; 1191 else 1192 val = 44; 1193 break; 1194 case FMAN_PORT_TYPE_RX: 1195 if (speed == 10000) 1196 val = 48; 1197 else 1198 val = 45; 1199 break; 1200 default: 1201 val = 0; 1202 } 1203 } 1204 1205 return val; 1206 } 1207 1208 static void set_dflt_cfg(struct fman_port *port, 1209 struct fman_port_params *port_params) 1210 { 1211 struct fman_port_cfg *cfg = port->cfg; 1212 1213 cfg->dma_swap_data = FMAN_PORT_DMA_NO_SWAP; 1214 cfg->color = FMAN_PORT_COLOR_GREEN; 1215 cfg->rx_cut_end_bytes = DFLT_PORT_CUT_BYTES_FROM_END; 1216 cfg->rx_pri_elevation = BMI_PRIORITY_ELEVATION_LEVEL; 1217 cfg->rx_fifo_thr = BMI_FIFO_THRESHOLD; 1218 cfg->tx_fifo_low_comf_level = (5 * 1024); 1219 cfg->deq_type = FMAN_PORT_DEQ_BY_PRI; 1220 cfg->deq_prefetch_option = FMAN_PORT_DEQ_FULL_PREFETCH; 1221 cfg->tx_fifo_deq_pipeline_depth = 1222 BMI_DEQUEUE_PIPELINE_DEPTH(port->port_type, port->port_speed); 1223 cfg->deq_byte_cnt = QMI_BYTE_COUNT_LEVEL_CONTROL(port->port_type); 1224 1225 cfg->rx_pri_elevation = 1226 DFLT_PORT_RX_FIFO_PRI_ELEVATION_LEV(port->max_port_fifo_size); 1227 port->cfg->rx_fifo_thr = 1228 DFLT_PORT_RX_FIFO_THRESHOLD(port->rev_info.major, 1229 port->max_port_fifo_size); 1230 1231 if ((port->rev_info.major == 6) && 1232 ((port->rev_info.minor == 0) || (port->rev_info.minor == 3))) 1233 cfg->errata_A006320 = true; 1234 1235 /* Excessive Threshold register - exists for pre-FMv3 chips only */ 1236 if (port->rev_info.major < 6) 1237 cfg->excessive_threshold_register = true; 1238 else 1239 cfg->fmbm_tfne_has_features = true; 1240 1241 cfg->buffer_prefix_content.data_align = 1242 DFLT_PORT_BUFFER_PREFIX_CONTEXT_DATA_ALIGN; 1243 } 1244 1245 static void set_rx_dflt_cfg(struct fman_port *port, 1246 struct fman_port_params *port_params) 1247 { 1248 port->cfg->discard_mask = DFLT_PORT_ERRORS_TO_DISCARD; 1249 1250 memcpy(&port->cfg->ext_buf_pools, 1251 &port_params->specific_params.rx_params.ext_buf_pools, 1252 sizeof(struct fman_ext_pools)); 1253 port->cfg->err_fqid = 1254 port_params->specific_params.rx_params.err_fqid; 1255 port->cfg->dflt_fqid = 1256 port_params->specific_params.rx_params.dflt_fqid; 1257 port->cfg->pcd_base_fqid = 1258 port_params->specific_params.rx_params.pcd_base_fqid; 1259 port->cfg->pcd_fqs_count = 1260 port_params->specific_params.rx_params.pcd_fqs_count; 1261 } 1262 1263 static void set_tx_dflt_cfg(struct fman_port *port, 1264 struct fman_port_params *port_params, 1265 struct fman_port_dts_params *dts_params) 1266 { 1267 port->cfg->tx_fifo_deq_pipeline_depth = 1268 get_dflt_fifo_deq_pipeline_depth(port->rev_info.major, 1269 port->port_type, 1270 port->port_speed); 1271 port->cfg->err_fqid = 1272 port_params->specific_params.non_rx_params.err_fqid; 1273 port->cfg->deq_sp = 1274 (u8)(dts_params->qman_channel_id & QMI_DEQ_CFG_SUBPORTAL_MASK); 1275 port->cfg->dflt_fqid = 1276 port_params->specific_params.non_rx_params.dflt_fqid; 1277 port->cfg->deq_high_priority = true; 1278 } 1279 1280 /** 1281 * fman_port_config 1282 * @port: Pointer to the port structure 1283 * @params: Pointer to data structure of parameters 1284 * 1285 * Creates a descriptor for the FM PORT module. 1286 * The routine returns a pointer to the FM PORT object. 1287 * This descriptor must be passed as first parameter to all other FM PORT 1288 * function calls. 1289 * No actual initialization or configuration of FM hardware is done by this 1290 * routine. 1291 * 1292 * Return: 0 on success; Error code otherwise. 1293 */ 1294 int fman_port_config(struct fman_port *port, struct fman_port_params *params) 1295 { 1296 void __iomem *base_addr = port->dts_params.base_addr; 1297 int err; 1298 1299 /* Allocate the FM driver's parameters structure */ 1300 port->cfg = kzalloc(sizeof(*port->cfg), GFP_KERNEL); 1301 if (!port->cfg) 1302 return -EINVAL; 1303 1304 /* Initialize FM port parameters which will be kept by the driver */ 1305 port->port_type = port->dts_params.type; 1306 port->port_speed = port->dts_params.speed; 1307 port->port_id = port->dts_params.id; 1308 port->fm = port->dts_params.fman; 1309 port->ext_pools_num = (u8)8; 1310 1311 /* get FM revision */ 1312 fman_get_revision(port->fm, &port->rev_info); 1313 1314 err = fill_soc_specific_params(port); 1315 if (err) 1316 goto err_port_cfg; 1317 1318 switch (port->port_type) { 1319 case FMAN_PORT_TYPE_RX: 1320 set_rx_dflt_cfg(port, params); 1321 fallthrough; 1322 case FMAN_PORT_TYPE_TX: 1323 set_tx_dflt_cfg(port, params, &port->dts_params); 1324 fallthrough; 1325 default: 1326 set_dflt_cfg(port, params); 1327 } 1328 1329 /* Continue with other parameters */ 1330 /* set memory map pointers */ 1331 port->bmi_regs = base_addr + BMI_PORT_REGS_OFFSET; 1332 port->qmi_regs = base_addr + QMI_PORT_REGS_OFFSET; 1333 port->hwp_regs = base_addr + HWP_PORT_REGS_OFFSET; 1334 1335 port->max_frame_length = DFLT_PORT_MAX_FRAME_LENGTH; 1336 /* resource distribution. */ 1337 1338 port->fifo_bufs.num = 1339 get_dflt_num_of_fifo_bufs(port->rev_info.major, port->port_type, 1340 port->port_speed) * FMAN_BMI_FIFO_UNITS; 1341 port->fifo_bufs.extra = 1342 DFLT_PORT_EXTRA_NUM_OF_FIFO_BUFS * FMAN_BMI_FIFO_UNITS; 1343 1344 port->open_dmas.num = 1345 get_dflt_num_of_open_dmas(port->rev_info.major, 1346 port->port_type, port->port_speed); 1347 port->open_dmas.extra = 1348 get_dflt_extra_num_of_open_dmas(port->rev_info.major, 1349 port->port_type, port->port_speed); 1350 port->tasks.num = 1351 get_dflt_num_of_tasks(port->rev_info.major, 1352 port->port_type, port->port_speed); 1353 port->tasks.extra = 1354 get_dflt_extra_num_of_tasks(port->rev_info.major, 1355 port->port_type, port->port_speed); 1356 1357 /* FM_HEAVY_TRAFFIC_SEQUENCER_HANG_ERRATA_FMAN_A006981 errata 1358 * workaround 1359 */ 1360 if ((port->rev_info.major == 6) && (port->rev_info.minor == 0) && 1361 (((port->port_type == FMAN_PORT_TYPE_TX) && 1362 (port->port_speed == 1000)))) { 1363 port->open_dmas.num = 16; 1364 port->open_dmas.extra = 0; 1365 } 1366 1367 if (port->rev_info.major >= 6 && 1368 port->port_type == FMAN_PORT_TYPE_TX && 1369 port->port_speed == 1000) { 1370 /* FM_WRONG_RESET_VALUES_ERRATA_FMAN_A005127 Errata 1371 * workaround 1372 */ 1373 u32 reg; 1374 1375 reg = 0x00001013; 1376 iowrite32be(reg, &port->bmi_regs->tx.fmbm_tfp); 1377 } 1378 1379 return 0; 1380 1381 err_port_cfg: 1382 kfree(port->cfg); 1383 return -EINVAL; 1384 } 1385 EXPORT_SYMBOL(fman_port_config); 1386 1387 /* 1388 * fman_port_use_kg_hash 1389 * @port: A pointer to a FM Port module. 1390 * @enable: enable or disable 1391 * 1392 * Sets the HW KeyGen or the BMI as HW Parser next engine, enabling 1393 * or bypassing the KeyGen hashing of Rx traffic 1394 */ 1395 void fman_port_use_kg_hash(struct fman_port *port, bool enable) 1396 { 1397 if (enable) 1398 /* After the Parser frames go to KeyGen */ 1399 iowrite32be(NIA_ENG_HWK, &port->bmi_regs->rx.fmbm_rfpne); 1400 else 1401 /* After the Parser frames go to BMI */ 1402 iowrite32be(NIA_ENG_BMI | NIA_BMI_AC_ENQ_FRAME, 1403 &port->bmi_regs->rx.fmbm_rfpne); 1404 } 1405 EXPORT_SYMBOL(fman_port_use_kg_hash); 1406 1407 /** 1408 * fman_port_init 1409 * @port: A pointer to a FM Port module. 1410 * 1411 * Initializes the FM PORT module by defining the software structure and 1412 * configuring the hardware registers. 1413 * 1414 * Return: 0 on success; Error code otherwise. 1415 */ 1416 int fman_port_init(struct fman_port *port) 1417 { 1418 struct fman_port_init_params params; 1419 struct fman_keygen *keygen; 1420 struct fman_port_cfg *cfg; 1421 int err; 1422 1423 if (is_init_done(port->cfg)) 1424 return -EINVAL; 1425 1426 err = fman_sp_build_buffer_struct(&port->cfg->int_context, 1427 &port->cfg->buffer_prefix_content, 1428 &port->cfg->buf_margins, 1429 &port->buffer_offsets, 1430 &port->internal_buf_offset); 1431 if (err) 1432 return err; 1433 1434 cfg = port->cfg; 1435 1436 if (port->port_type == FMAN_PORT_TYPE_RX) { 1437 /* Call the external Buffer routine which also checks fifo 1438 * size and updates it if necessary 1439 */ 1440 /* define external buffer pools and pool depletion */ 1441 err = set_ext_buffer_pools(port); 1442 if (err) 1443 return err; 1444 /* check if the largest external buffer pool is large enough */ 1445 if (cfg->buf_margins.start_margins + MIN_EXT_BUF_SIZE + 1446 cfg->buf_margins.end_margins > 1447 port->rx_pools_params.largest_buf_size) { 1448 dev_err(port->dev, "%s: buf_margins.start_margins (%d) + minimum buf size (64) + buf_margins.end_margins (%d) is larger than maximum external buffer size (%d)\n", 1449 __func__, cfg->buf_margins.start_margins, 1450 cfg->buf_margins.end_margins, 1451 port->rx_pools_params.largest_buf_size); 1452 return -EINVAL; 1453 } 1454 } 1455 1456 /* Call FM module routine for communicating parameters */ 1457 memset(¶ms, 0, sizeof(params)); 1458 params.port_id = port->port_id; 1459 params.port_type = port->port_type; 1460 params.port_speed = port->port_speed; 1461 params.num_of_tasks = (u8)port->tasks.num; 1462 params.num_of_extra_tasks = (u8)port->tasks.extra; 1463 params.num_of_open_dmas = (u8)port->open_dmas.num; 1464 params.num_of_extra_open_dmas = (u8)port->open_dmas.extra; 1465 1466 if (port->fifo_bufs.num) { 1467 err = verify_size_of_fifo(port); 1468 if (err) 1469 return err; 1470 } 1471 params.size_of_fifo = port->fifo_bufs.num; 1472 params.extra_size_of_fifo = port->fifo_bufs.extra; 1473 params.deq_pipeline_depth = port->cfg->tx_fifo_deq_pipeline_depth; 1474 params.max_frame_length = port->max_frame_length; 1475 1476 err = fman_set_port_params(port->fm, ¶ms); 1477 if (err) 1478 return err; 1479 1480 err = init_low_level_driver(port); 1481 if (err) 1482 return err; 1483 1484 if (port->cfg->pcd_fqs_count) { 1485 keygen = port->dts_params.fman->keygen; 1486 err = keygen_port_hashing_init(keygen, port->port_id, 1487 port->cfg->pcd_base_fqid, 1488 port->cfg->pcd_fqs_count); 1489 if (err) 1490 return err; 1491 1492 fman_port_use_kg_hash(port, true); 1493 } 1494 1495 kfree(port->cfg); 1496 port->cfg = NULL; 1497 1498 return 0; 1499 } 1500 EXPORT_SYMBOL(fman_port_init); 1501 1502 /** 1503 * fman_port_cfg_buf_prefix_content 1504 * @port: A pointer to a FM Port module. 1505 * @buffer_prefix_content: A structure of parameters describing 1506 * the structure of the buffer. 1507 * Out parameter: 1508 * Start margin - offset of data from 1509 * start of external buffer. 1510 * Defines the structure, size and content of the application buffer. 1511 * The prefix, in Tx ports, if 'pass_prs_result', the application should set 1512 * a value to their offsets in the prefix of the FM will save the first 1513 * 'priv_data_size', than, depending on 'pass_prs_result' and 1514 * 'pass_time_stamp', copy parse result and timeStamp, and the packet itself 1515 * (in this order), to the application buffer, and to offset. 1516 * Calling this routine changes the buffer margins definitions in the internal 1517 * driver data base from its default configuration: 1518 * Data size: [DEFAULT_PORT_BUFFER_PREFIX_CONTENT_PRIV_DATA_SIZE] 1519 * Pass Parser result: [DEFAULT_PORT_BUFFER_PREFIX_CONTENT_PASS_PRS_RESULT]. 1520 * Pass timestamp: [DEFAULT_PORT_BUFFER_PREFIX_CONTENT_PASS_TIME_STAMP]. 1521 * May be used for all ports 1522 * 1523 * Allowed only following fman_port_config() and before fman_port_init(). 1524 * 1525 * Return: 0 on success; Error code otherwise. 1526 */ 1527 int fman_port_cfg_buf_prefix_content(struct fman_port *port, 1528 struct fman_buffer_prefix_content * 1529 buffer_prefix_content) 1530 { 1531 if (is_init_done(port->cfg)) 1532 return -EINVAL; 1533 1534 memcpy(&port->cfg->buffer_prefix_content, 1535 buffer_prefix_content, 1536 sizeof(struct fman_buffer_prefix_content)); 1537 /* if data_align was not initialized by user, 1538 * we return to driver's default 1539 */ 1540 if (!port->cfg->buffer_prefix_content.data_align) 1541 port->cfg->buffer_prefix_content.data_align = 1542 DFLT_PORT_BUFFER_PREFIX_CONTEXT_DATA_ALIGN; 1543 1544 return 0; 1545 } 1546 EXPORT_SYMBOL(fman_port_cfg_buf_prefix_content); 1547 1548 /** 1549 * fman_port_disable 1550 * @port: A pointer to a FM Port module. 1551 * 1552 * Gracefully disable an FM port. The port will not start new tasks after all 1553 * tasks associated with the port are terminated. 1554 * 1555 * This is a blocking routine, it returns after port is gracefully stopped, 1556 * i.e. the port will not except new frames, but it will finish all frames 1557 * or tasks which were already began. 1558 * Allowed only following fman_port_init(). 1559 * 1560 * Return: 0 on success; Error code otherwise. 1561 */ 1562 int fman_port_disable(struct fman_port *port) 1563 { 1564 u32 __iomem *bmi_cfg_reg, *bmi_status_reg; 1565 u32 tmp; 1566 bool rx_port, failure = false; 1567 int count; 1568 1569 if (!is_init_done(port->cfg)) 1570 return -EINVAL; 1571 1572 switch (port->port_type) { 1573 case FMAN_PORT_TYPE_RX: 1574 bmi_cfg_reg = &port->bmi_regs->rx.fmbm_rcfg; 1575 bmi_status_reg = &port->bmi_regs->rx.fmbm_rst; 1576 rx_port = true; 1577 break; 1578 case FMAN_PORT_TYPE_TX: 1579 bmi_cfg_reg = &port->bmi_regs->tx.fmbm_tcfg; 1580 bmi_status_reg = &port->bmi_regs->tx.fmbm_tst; 1581 rx_port = false; 1582 break; 1583 default: 1584 return -EINVAL; 1585 } 1586 1587 /* Disable QMI */ 1588 if (!rx_port) { 1589 tmp = ioread32be(&port->qmi_regs->fmqm_pnc) & ~QMI_PORT_CFG_EN; 1590 iowrite32be(tmp, &port->qmi_regs->fmqm_pnc); 1591 1592 /* Wait for QMI to finish FD handling */ 1593 count = 100; 1594 do { 1595 udelay(10); 1596 tmp = ioread32be(&port->qmi_regs->fmqm_pns); 1597 } while ((tmp & QMI_PORT_STATUS_DEQ_FD_BSY) && --count); 1598 1599 if (count == 0) { 1600 /* Timeout */ 1601 failure = true; 1602 } 1603 } 1604 1605 /* Disable BMI */ 1606 tmp = ioread32be(bmi_cfg_reg) & ~BMI_PORT_CFG_EN; 1607 iowrite32be(tmp, bmi_cfg_reg); 1608 1609 /* Wait for graceful stop end */ 1610 count = 500; 1611 do { 1612 udelay(10); 1613 tmp = ioread32be(bmi_status_reg); 1614 } while ((tmp & BMI_PORT_STATUS_BSY) && --count); 1615 1616 if (count == 0) { 1617 /* Timeout */ 1618 failure = true; 1619 } 1620 1621 if (failure) 1622 dev_dbg(port->dev, "%s: FMan Port[%d]: BMI or QMI is Busy. Port forced down\n", 1623 __func__, port->port_id); 1624 1625 return 0; 1626 } 1627 EXPORT_SYMBOL(fman_port_disable); 1628 1629 /** 1630 * fman_port_enable 1631 * @port: A pointer to a FM Port module. 1632 * 1633 * A runtime routine provided to allow disable/enable of port. 1634 * 1635 * Allowed only following fman_port_init(). 1636 * 1637 * Return: 0 on success; Error code otherwise. 1638 */ 1639 int fman_port_enable(struct fman_port *port) 1640 { 1641 u32 __iomem *bmi_cfg_reg; 1642 u32 tmp; 1643 bool rx_port; 1644 1645 if (!is_init_done(port->cfg)) 1646 return -EINVAL; 1647 1648 switch (port->port_type) { 1649 case FMAN_PORT_TYPE_RX: 1650 bmi_cfg_reg = &port->bmi_regs->rx.fmbm_rcfg; 1651 rx_port = true; 1652 break; 1653 case FMAN_PORT_TYPE_TX: 1654 bmi_cfg_reg = &port->bmi_regs->tx.fmbm_tcfg; 1655 rx_port = false; 1656 break; 1657 default: 1658 return -EINVAL; 1659 } 1660 1661 /* Enable QMI */ 1662 if (!rx_port) { 1663 tmp = ioread32be(&port->qmi_regs->fmqm_pnc) | QMI_PORT_CFG_EN; 1664 iowrite32be(tmp, &port->qmi_regs->fmqm_pnc); 1665 } 1666 1667 /* Enable BMI */ 1668 tmp = ioread32be(bmi_cfg_reg) | BMI_PORT_CFG_EN; 1669 iowrite32be(tmp, bmi_cfg_reg); 1670 1671 return 0; 1672 } 1673 EXPORT_SYMBOL(fman_port_enable); 1674 1675 /** 1676 * fman_port_bind 1677 * @dev: FMan Port OF device pointer 1678 * 1679 * Bind to a specific FMan Port. 1680 * 1681 * Allowed only after the port was created. 1682 * 1683 * Return: A pointer to the FMan port device. 1684 */ 1685 struct fman_port *fman_port_bind(struct device *dev) 1686 { 1687 return (struct fman_port *)(dev_get_drvdata(get_device(dev))); 1688 } 1689 EXPORT_SYMBOL(fman_port_bind); 1690 1691 /** 1692 * fman_port_get_qman_channel_id 1693 * @port: Pointer to the FMan port devuce 1694 * 1695 * Get the QMan channel ID for the specific port 1696 * 1697 * Return: QMan channel ID 1698 */ 1699 u32 fman_port_get_qman_channel_id(struct fman_port *port) 1700 { 1701 return port->dts_params.qman_channel_id; 1702 } 1703 EXPORT_SYMBOL(fman_port_get_qman_channel_id); 1704 1705 /** 1706 * fman_port_get_device 1707 * @port: Pointer to the FMan port device 1708 * 1709 * Get the 'struct device' associated to the specified FMan port device 1710 * 1711 * Return: pointer to associated 'struct device' 1712 */ 1713 struct device *fman_port_get_device(struct fman_port *port) 1714 { 1715 return port->dev; 1716 } 1717 EXPORT_SYMBOL(fman_port_get_device); 1718 1719 int fman_port_get_hash_result_offset(struct fman_port *port, u32 *offset) 1720 { 1721 if (port->buffer_offsets.hash_result_offset == ILLEGAL_BASE) 1722 return -EINVAL; 1723 1724 *offset = port->buffer_offsets.hash_result_offset; 1725 1726 return 0; 1727 } 1728 EXPORT_SYMBOL(fman_port_get_hash_result_offset); 1729 1730 int fman_port_get_tstamp(struct fman_port *port, const void *data, u64 *tstamp) 1731 { 1732 if (port->buffer_offsets.time_stamp_offset == ILLEGAL_BASE) 1733 return -EINVAL; 1734 1735 *tstamp = be64_to_cpu(*(__be64 *)(data + 1736 port->buffer_offsets.time_stamp_offset)); 1737 1738 return 0; 1739 } 1740 EXPORT_SYMBOL(fman_port_get_tstamp); 1741 1742 static int fman_port_probe(struct platform_device *of_dev) 1743 { 1744 struct fman_port *port; 1745 struct fman *fman; 1746 struct device_node *fm_node, *port_node; 1747 struct platform_device *fm_pdev; 1748 struct resource res; 1749 struct resource *dev_res; 1750 u32 val; 1751 int err = 0, lenp; 1752 enum fman_port_type port_type; 1753 u16 port_speed; 1754 u8 port_id; 1755 1756 port = kzalloc(sizeof(*port), GFP_KERNEL); 1757 if (!port) 1758 return -ENOMEM; 1759 1760 port->dev = &of_dev->dev; 1761 1762 port_node = of_node_get(of_dev->dev.of_node); 1763 1764 /* Get the FM node */ 1765 fm_node = of_get_parent(port_node); 1766 if (!fm_node) { 1767 dev_err(port->dev, "%s: of_get_parent() failed\n", __func__); 1768 err = -ENODEV; 1769 goto return_err; 1770 } 1771 1772 fm_pdev = of_find_device_by_node(fm_node); 1773 of_node_put(fm_node); 1774 if (!fm_pdev) { 1775 err = -EINVAL; 1776 goto return_err; 1777 } 1778 1779 fman = dev_get_drvdata(&fm_pdev->dev); 1780 if (!fman) { 1781 err = -EINVAL; 1782 goto put_device; 1783 } 1784 1785 err = of_property_read_u32(port_node, "cell-index", &val); 1786 if (err) { 1787 dev_err(port->dev, "%s: reading cell-index for %pOF failed\n", 1788 __func__, port_node); 1789 err = -EINVAL; 1790 goto put_device; 1791 } 1792 port_id = (u8)val; 1793 port->dts_params.id = port_id; 1794 1795 if (of_device_is_compatible(port_node, "fsl,fman-v3-port-tx")) { 1796 port_type = FMAN_PORT_TYPE_TX; 1797 port_speed = 1000; 1798 if (of_find_property(port_node, "fsl,fman-10g-port", &lenp)) 1799 port_speed = 10000; 1800 1801 } else if (of_device_is_compatible(port_node, "fsl,fman-v2-port-tx")) { 1802 if (port_id >= TX_10G_PORT_BASE) 1803 port_speed = 10000; 1804 else 1805 port_speed = 1000; 1806 port_type = FMAN_PORT_TYPE_TX; 1807 1808 } else if (of_device_is_compatible(port_node, "fsl,fman-v3-port-rx")) { 1809 port_type = FMAN_PORT_TYPE_RX; 1810 port_speed = 1000; 1811 if (of_find_property(port_node, "fsl,fman-10g-port", &lenp)) 1812 port_speed = 10000; 1813 1814 } else if (of_device_is_compatible(port_node, "fsl,fman-v2-port-rx")) { 1815 if (port_id >= RX_10G_PORT_BASE) 1816 port_speed = 10000; 1817 else 1818 port_speed = 1000; 1819 port_type = FMAN_PORT_TYPE_RX; 1820 1821 } else { 1822 dev_err(port->dev, "%s: Illegal port type\n", __func__); 1823 err = -EINVAL; 1824 goto put_device; 1825 } 1826 1827 port->dts_params.type = port_type; 1828 port->dts_params.speed = port_speed; 1829 1830 if (port_type == FMAN_PORT_TYPE_TX) { 1831 u32 qman_channel_id; 1832 1833 qman_channel_id = fman_get_qman_channel_id(fman, port_id); 1834 if (qman_channel_id == 0) { 1835 dev_err(port->dev, "%s: incorrect qman-channel-id\n", 1836 __func__); 1837 err = -EINVAL; 1838 goto put_device; 1839 } 1840 port->dts_params.qman_channel_id = qman_channel_id; 1841 } 1842 1843 err = of_address_to_resource(port_node, 0, &res); 1844 if (err < 0) { 1845 dev_err(port->dev, "%s: of_address_to_resource() failed\n", 1846 __func__); 1847 err = -ENOMEM; 1848 goto put_device; 1849 } 1850 1851 port->dts_params.fman = fman; 1852 1853 of_node_put(port_node); 1854 1855 dev_res = __devm_request_region(port->dev, &res, res.start, 1856 resource_size(&res), "fman-port"); 1857 if (!dev_res) { 1858 dev_err(port->dev, "%s: __devm_request_region() failed\n", 1859 __func__); 1860 err = -EINVAL; 1861 goto free_port; 1862 } 1863 1864 port->dts_params.base_addr = devm_ioremap(port->dev, res.start, 1865 resource_size(&res)); 1866 if (!port->dts_params.base_addr) 1867 dev_err(port->dev, "%s: devm_ioremap() failed\n", __func__); 1868 1869 dev_set_drvdata(&of_dev->dev, port); 1870 1871 return 0; 1872 1873 put_device: 1874 put_device(&fm_pdev->dev); 1875 return_err: 1876 of_node_put(port_node); 1877 free_port: 1878 kfree(port); 1879 return err; 1880 } 1881 1882 static const struct of_device_id fman_port_match[] = { 1883 {.compatible = "fsl,fman-v3-port-rx"}, 1884 {.compatible = "fsl,fman-v2-port-rx"}, 1885 {.compatible = "fsl,fman-v3-port-tx"}, 1886 {.compatible = "fsl,fman-v2-port-tx"}, 1887 {} 1888 }; 1889 1890 MODULE_DEVICE_TABLE(of, fman_port_match); 1891 1892 static struct platform_driver fman_port_driver = { 1893 .driver = { 1894 .name = "fsl-fman-port", 1895 .of_match_table = fman_port_match, 1896 }, 1897 .probe = fman_port_probe, 1898 }; 1899 1900 static int __init fman_port_load(void) 1901 { 1902 int err; 1903 1904 pr_debug("FSL DPAA FMan driver\n"); 1905 1906 err = platform_driver_register(&fman_port_driver); 1907 if (err < 0) 1908 pr_err("Error, platform_driver_register() = %d\n", err); 1909 1910 return err; 1911 } 1912 module_init(fman_port_load); 1913 1914 static void __exit fman_port_unload(void) 1915 { 1916 platform_driver_unregister(&fman_port_driver); 1917 } 1918 module_exit(fman_port_unload); 1919 1920 MODULE_LICENSE("Dual BSD/GPL"); 1921 MODULE_DESCRIPTION("Freescale DPAA Frame Manager Port driver"); 1922