1 /* winbond-840.c: A Linux PCI network adapter device driver. */ 2 /* 3 Written 1998-2001 by Donald Becker. 4 5 This software may be used and distributed according to the terms of 6 the GNU General Public License (GPL), incorporated herein by reference. 7 Drivers based on or derived from this code fall under the GPL and must 8 retain the authorship, copyright and license notice. This file is not 9 a complete program and may only be used when the entire operating 10 system is licensed under the GPL. 11 12 The author may be reached as becker@scyld.com, or C/O 13 Scyld Computing Corporation 14 410 Severn Ave., Suite 210 15 Annapolis MD 21403 16 17 Support and updates available at 18 http://www.scyld.com/network/drivers.html 19 20 Do not remove the copyright information. 21 Do not change the version information unless an improvement has been made. 22 Merely removing my name, as Compex has done in the past, does not count 23 as an improvement. 24 25 Changelog: 26 * ported to 2.4 27 ??? 28 * spin lock update, memory barriers, new style dma mappings 29 limit each tx buffer to < 1024 bytes 30 remove DescIntr from Rx descriptors (that's an Tx flag) 31 remove next pointer from Tx descriptors 32 synchronize tx_q_bytes 33 software reset in tx_timeout 34 Copyright (C) 2000 Manfred Spraul 35 * further cleanups 36 power management. 37 support for big endian descriptors 38 Copyright (C) 2001 Manfred Spraul 39 * ethtool support (jgarzik) 40 * Replace some MII-related magic numbers with constants (jgarzik) 41 42 TODO: 43 * enable pci_power_off 44 * Wake-On-LAN 45 */ 46 47 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 48 49 #define DRV_NAME "winbond-840" 50 #define DRV_VERSION "1.01-e" 51 #define DRV_RELDATE "Sep-11-2006" 52 53 54 /* Automatically extracted configuration info: 55 probe-func: winbond840_probe 56 config-in: tristate 'Winbond W89c840 Ethernet support' CONFIG_WINBOND_840 57 58 c-help-name: Winbond W89c840 PCI Ethernet support 59 c-help-symbol: CONFIG_WINBOND_840 60 c-help: This driver is for the Winbond W89c840 chip. It also works with 61 c-help: the TX9882 chip on the Compex RL100-ATX board. 62 c-help: More specific information and updates are available from 63 c-help: http://www.scyld.com/network/drivers.html 64 */ 65 66 /* The user-configurable values. 67 These may be modified when a driver module is loaded.*/ 68 69 static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */ 70 static int max_interrupt_work = 20; 71 /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). 72 The '840 uses a 64 element hash table based on the Ethernet CRC. */ 73 static int multicast_filter_limit = 32; 74 75 /* Set the copy breakpoint for the copy-only-tiny-frames scheme. 76 Setting to > 1518 effectively disables this feature. */ 77 static int rx_copybreak; 78 79 /* Used to pass the media type, etc. 80 Both 'options[]' and 'full_duplex[]' should exist for driver 81 interoperability. 82 The media type is usually passed in 'options[]'. 83 */ 84 #define MAX_UNITS 8 /* More are supported, limit only on options */ 85 static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; 86 static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; 87 88 /* Operational parameters that are set at compile time. */ 89 90 /* Keep the ring sizes a power of two for compile efficiency. 91 The compiler will convert <unsigned>'%'<2^N> into a bit mask. 92 Making the Tx ring too large decreases the effectiveness of channel 93 bonding and packet priority. 94 There are no ill effects from too-large receive rings. */ 95 #define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */ 96 #define TX_QUEUE_LEN_RESTART 5 97 98 #define TX_BUFLIMIT (1024-128) 99 100 /* The presumed FIFO size for working around the Tx-FIFO-overflow bug. 101 To avoid overflowing we don't queue again until we have room for a 102 full-size packet. 103 */ 104 #define TX_FIFO_SIZE (2048) 105 #define TX_BUG_FIFO_LIMIT (TX_FIFO_SIZE-1514-16) 106 107 108 /* Operational parameters that usually are not changed. */ 109 /* Time in jiffies before concluding the transmitter is hung. */ 110 #define TX_TIMEOUT (2*HZ) 111 112 /* Include files, designed to support most kernel versions 2.0.0 and later. */ 113 #include <linux/module.h> 114 #include <linux/kernel.h> 115 #include <linux/string.h> 116 #include <linux/timer.h> 117 #include <linux/errno.h> 118 #include <linux/ioport.h> 119 #include <linux/interrupt.h> 120 #include <linux/pci.h> 121 #include <linux/dma-mapping.h> 122 #include <linux/netdevice.h> 123 #include <linux/etherdevice.h> 124 #include <linux/skbuff.h> 125 #include <linux/init.h> 126 #include <linux/delay.h> 127 #include <linux/ethtool.h> 128 #include <linux/mii.h> 129 #include <linux/rtnetlink.h> 130 #include <linux/crc32.h> 131 #include <linux/bitops.h> 132 #include <asm/uaccess.h> 133 #include <asm/processor.h> /* Processor type for cache alignment. */ 134 #include <asm/io.h> 135 #include <asm/irq.h> 136 137 #include "tulip.h" 138 139 #undef PKT_BUF_SZ /* tulip.h also defines this */ 140 #define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ 141 142 /* These identify the driver base version and may not be removed. */ 143 static const char version[] __initconst = 144 "v" DRV_VERSION " (2.4 port) " 145 DRV_RELDATE " Donald Becker <becker@scyld.com>\n" 146 " http://www.scyld.com/network/drivers.html\n"; 147 148 MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); 149 MODULE_DESCRIPTION("Winbond W89c840 Ethernet driver"); 150 MODULE_LICENSE("GPL"); 151 MODULE_VERSION(DRV_VERSION); 152 153 module_param(max_interrupt_work, int, 0); 154 module_param(debug, int, 0); 155 module_param(rx_copybreak, int, 0); 156 module_param(multicast_filter_limit, int, 0); 157 module_param_array(options, int, NULL, 0); 158 module_param_array(full_duplex, int, NULL, 0); 159 MODULE_PARM_DESC(max_interrupt_work, "winbond-840 maximum events handled per interrupt"); 160 MODULE_PARM_DESC(debug, "winbond-840 debug level (0-6)"); 161 MODULE_PARM_DESC(rx_copybreak, "winbond-840 copy breakpoint for copy-only-tiny-frames"); 162 MODULE_PARM_DESC(multicast_filter_limit, "winbond-840 maximum number of filtered multicast addresses"); 163 MODULE_PARM_DESC(options, "winbond-840: Bits 0-3: media type, bit 17: full duplex"); 164 MODULE_PARM_DESC(full_duplex, "winbond-840 full duplex setting(s) (1)"); 165 166 /* 167 Theory of Operation 168 169 I. Board Compatibility 170 171 This driver is for the Winbond w89c840 chip. 172 173 II. Board-specific settings 174 175 None. 176 177 III. Driver operation 178 179 This chip is very similar to the Digital 21*4* "Tulip" family. The first 180 twelve registers and the descriptor format are nearly identical. Read a 181 Tulip manual for operational details. 182 183 A significant difference is that the multicast filter and station address are 184 stored in registers rather than loaded through a pseudo-transmit packet. 185 186 Unlike the Tulip, transmit buffers are limited to 1KB. To transmit a 187 full-sized packet we must use both data buffers in a descriptor. Thus the 188 driver uses ring mode where descriptors are implicitly sequential in memory, 189 rather than using the second descriptor address as a chain pointer to 190 subsequent descriptors. 191 192 IV. Notes 193 194 If you are going to almost clone a Tulip, why not go all the way and avoid 195 the need for a new driver? 196 197 IVb. References 198 199 http://www.scyld.com/expert/100mbps.html 200 http://www.scyld.com/expert/NWay.html 201 http://www.winbond.com.tw/ 202 203 IVc. Errata 204 205 A horrible bug exists in the transmit FIFO. Apparently the chip doesn't 206 correctly detect a full FIFO, and queuing more than 2048 bytes may result in 207 silent data corruption. 208 209 Test with 'ping -s 10000' on a fast computer. 210 211 */ 212 213 214 215 /* 216 PCI probe table. 217 */ 218 enum chip_capability_flags { 219 CanHaveMII=1, HasBrokenTx=2, AlwaysFDX=4, FDXOnNoMII=8, 220 }; 221 222 static DEFINE_PCI_DEVICE_TABLE(w840_pci_tbl) = { 223 { 0x1050, 0x0840, PCI_ANY_ID, 0x8153, 0, 0, 0 }, 224 { 0x1050, 0x0840, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, 225 { 0x11f6, 0x2011, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 }, 226 { } 227 }; 228 MODULE_DEVICE_TABLE(pci, w840_pci_tbl); 229 230 enum { 231 netdev_res_size = 128, /* size of PCI BAR resource */ 232 }; 233 234 struct pci_id_info { 235 const char *name; 236 int drv_flags; /* Driver use, intended as capability flags. */ 237 }; 238 239 static const struct pci_id_info pci_id_tbl[] = { 240 { /* Sometime a Level-One switch card. */ 241 "Winbond W89c840", CanHaveMII | HasBrokenTx | FDXOnNoMII}, 242 { "Winbond W89c840", CanHaveMII | HasBrokenTx}, 243 { "Compex RL100-ATX", CanHaveMII | HasBrokenTx}, 244 { } /* terminate list. */ 245 }; 246 247 /* This driver was written to use PCI memory space, however some x86 systems 248 work only with I/O space accesses. See CONFIG_TULIP_MMIO in .config 249 */ 250 251 /* Offsets to the Command and Status Registers, "CSRs". 252 While similar to the Tulip, these registers are longword aligned. 253 Note: It's not useful to define symbolic names for every register bit in 254 the device. The name can only partially document the semantics and make 255 the driver longer and more difficult to read. 256 */ 257 enum w840_offsets { 258 PCIBusCfg=0x00, TxStartDemand=0x04, RxStartDemand=0x08, 259 RxRingPtr=0x0C, TxRingPtr=0x10, 260 IntrStatus=0x14, NetworkConfig=0x18, IntrEnable=0x1C, 261 RxMissed=0x20, EECtrl=0x24, MIICtrl=0x24, BootRom=0x28, GPTimer=0x2C, 262 CurRxDescAddr=0x30, CurRxBufAddr=0x34, /* Debug use */ 263 MulticastFilter0=0x38, MulticastFilter1=0x3C, StationAddr=0x40, 264 CurTxDescAddr=0x4C, CurTxBufAddr=0x50, 265 }; 266 267 /* Bits in the NetworkConfig register. */ 268 enum rx_mode_bits { 269 AcceptErr=0x80, 270 RxAcceptBroadcast=0x20, AcceptMulticast=0x10, 271 RxAcceptAllPhys=0x08, AcceptMyPhys=0x02, 272 }; 273 274 enum mii_reg_bits { 275 MDIO_ShiftClk=0x10000, MDIO_DataIn=0x80000, MDIO_DataOut=0x20000, 276 MDIO_EnbOutput=0x40000, MDIO_EnbIn = 0x00000, 277 }; 278 279 /* The Tulip Rx and Tx buffer descriptors. */ 280 struct w840_rx_desc { 281 s32 status; 282 s32 length; 283 u32 buffer1; 284 u32 buffer2; 285 }; 286 287 struct w840_tx_desc { 288 s32 status; 289 s32 length; 290 u32 buffer1, buffer2; 291 }; 292 293 #define MII_CNT 1 /* winbond only supports one MII */ 294 struct netdev_private { 295 struct w840_rx_desc *rx_ring; 296 dma_addr_t rx_addr[RX_RING_SIZE]; 297 struct w840_tx_desc *tx_ring; 298 dma_addr_t tx_addr[TX_RING_SIZE]; 299 dma_addr_t ring_dma_addr; 300 /* The addresses of receive-in-place skbuffs. */ 301 struct sk_buff* rx_skbuff[RX_RING_SIZE]; 302 /* The saved address of a sent-in-place packet/buffer, for later free(). */ 303 struct sk_buff* tx_skbuff[TX_RING_SIZE]; 304 struct net_device_stats stats; 305 struct timer_list timer; /* Media monitoring timer. */ 306 /* Frequently used values: keep some adjacent for cache effect. */ 307 spinlock_t lock; 308 int chip_id, drv_flags; 309 struct pci_dev *pci_dev; 310 int csr6; 311 struct w840_rx_desc *rx_head_desc; 312 unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */ 313 unsigned int rx_buf_sz; /* Based on MTU+slack. */ 314 unsigned int cur_tx, dirty_tx; 315 unsigned int tx_q_bytes; 316 unsigned int tx_full; /* The Tx queue is full. */ 317 /* MII transceiver section. */ 318 int mii_cnt; /* MII device addresses. */ 319 unsigned char phys[MII_CNT]; /* MII device addresses, but only the first is used */ 320 u32 mii; 321 struct mii_if_info mii_if; 322 void __iomem *base_addr; 323 }; 324 325 static int eeprom_read(void __iomem *ioaddr, int location); 326 static int mdio_read(struct net_device *dev, int phy_id, int location); 327 static void mdio_write(struct net_device *dev, int phy_id, int location, int value); 328 static int netdev_open(struct net_device *dev); 329 static int update_link(struct net_device *dev); 330 static void netdev_timer(unsigned long data); 331 static void init_rxtx_rings(struct net_device *dev); 332 static void free_rxtx_rings(struct netdev_private *np); 333 static void init_registers(struct net_device *dev); 334 static void tx_timeout(struct net_device *dev); 335 static int alloc_ringdesc(struct net_device *dev); 336 static void free_ringdesc(struct netdev_private *np); 337 static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev); 338 static irqreturn_t intr_handler(int irq, void *dev_instance); 339 static void netdev_error(struct net_device *dev, int intr_status); 340 static int netdev_rx(struct net_device *dev); 341 static u32 __set_rx_mode(struct net_device *dev); 342 static void set_rx_mode(struct net_device *dev); 343 static struct net_device_stats *get_stats(struct net_device *dev); 344 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); 345 static const struct ethtool_ops netdev_ethtool_ops; 346 static int netdev_close(struct net_device *dev); 347 348 static const struct net_device_ops netdev_ops = { 349 .ndo_open = netdev_open, 350 .ndo_stop = netdev_close, 351 .ndo_start_xmit = start_tx, 352 .ndo_get_stats = get_stats, 353 .ndo_set_rx_mode = set_rx_mode, 354 .ndo_do_ioctl = netdev_ioctl, 355 .ndo_tx_timeout = tx_timeout, 356 .ndo_change_mtu = eth_change_mtu, 357 .ndo_set_mac_address = eth_mac_addr, 358 .ndo_validate_addr = eth_validate_addr, 359 }; 360 361 static int w840_probe1(struct pci_dev *pdev, const struct pci_device_id *ent) 362 { 363 struct net_device *dev; 364 struct netdev_private *np; 365 static int find_cnt; 366 int chip_idx = ent->driver_data; 367 int irq; 368 int i, option = find_cnt < MAX_UNITS ? options[find_cnt] : 0; 369 void __iomem *ioaddr; 370 371 i = pci_enable_device(pdev); 372 if (i) return i; 373 374 pci_set_master(pdev); 375 376 irq = pdev->irq; 377 378 if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { 379 pr_warn("Device %s disabled due to DMA limitations\n", 380 pci_name(pdev)); 381 return -EIO; 382 } 383 dev = alloc_etherdev(sizeof(*np)); 384 if (!dev) 385 return -ENOMEM; 386 SET_NETDEV_DEV(dev, &pdev->dev); 387 388 if (pci_request_regions(pdev, DRV_NAME)) 389 goto err_out_netdev; 390 391 ioaddr = pci_iomap(pdev, TULIP_BAR, netdev_res_size); 392 if (!ioaddr) 393 goto err_out_free_res; 394 395 for (i = 0; i < 3; i++) 396 ((__le16 *)dev->dev_addr)[i] = cpu_to_le16(eeprom_read(ioaddr, i)); 397 398 /* Reset the chip to erase previous misconfiguration. 399 No hold time required! */ 400 iowrite32(0x00000001, ioaddr + PCIBusCfg); 401 402 np = netdev_priv(dev); 403 np->pci_dev = pdev; 404 np->chip_id = chip_idx; 405 np->drv_flags = pci_id_tbl[chip_idx].drv_flags; 406 spin_lock_init(&np->lock); 407 np->mii_if.dev = dev; 408 np->mii_if.mdio_read = mdio_read; 409 np->mii_if.mdio_write = mdio_write; 410 np->base_addr = ioaddr; 411 412 pci_set_drvdata(pdev, dev); 413 414 if (dev->mem_start) 415 option = dev->mem_start; 416 417 /* The lower four bits are the media type. */ 418 if (option > 0) { 419 if (option & 0x200) 420 np->mii_if.full_duplex = 1; 421 if (option & 15) 422 dev_info(&dev->dev, 423 "ignoring user supplied media type %d", 424 option & 15); 425 } 426 if (find_cnt < MAX_UNITS && full_duplex[find_cnt] > 0) 427 np->mii_if.full_duplex = 1; 428 429 if (np->mii_if.full_duplex) 430 np->mii_if.force_media = 1; 431 432 /* The chip-specific entries in the device structure. */ 433 dev->netdev_ops = &netdev_ops; 434 dev->ethtool_ops = &netdev_ethtool_ops; 435 dev->watchdog_timeo = TX_TIMEOUT; 436 437 i = register_netdev(dev); 438 if (i) 439 goto err_out_cleardev; 440 441 dev_info(&dev->dev, "%s at %p, %pM, IRQ %d\n", 442 pci_id_tbl[chip_idx].name, ioaddr, dev->dev_addr, irq); 443 444 if (np->drv_flags & CanHaveMII) { 445 int phy, phy_idx = 0; 446 for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) { 447 int mii_status = mdio_read(dev, phy, MII_BMSR); 448 if (mii_status != 0xffff && mii_status != 0x0000) { 449 np->phys[phy_idx++] = phy; 450 np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE); 451 np->mii = (mdio_read(dev, phy, MII_PHYSID1) << 16)+ 452 mdio_read(dev, phy, MII_PHYSID2); 453 dev_info(&dev->dev, 454 "MII PHY %08xh found at address %d, status 0x%04x advertising %04x\n", 455 np->mii, phy, mii_status, 456 np->mii_if.advertising); 457 } 458 } 459 np->mii_cnt = phy_idx; 460 np->mii_if.phy_id = np->phys[0]; 461 if (phy_idx == 0) { 462 dev_warn(&dev->dev, 463 "MII PHY not found -- this device may not operate correctly\n"); 464 } 465 } 466 467 find_cnt++; 468 return 0; 469 470 err_out_cleardev: 471 pci_iounmap(pdev, ioaddr); 472 err_out_free_res: 473 pci_release_regions(pdev); 474 err_out_netdev: 475 free_netdev (dev); 476 return -ENODEV; 477 } 478 479 480 /* Read the EEPROM and MII Management Data I/O (MDIO) interfaces. These are 481 often serial bit streams generated by the host processor. 482 The example below is for the common 93c46 EEPROM, 64 16 bit words. */ 483 484 /* Delay between EEPROM clock transitions. 485 No extra delay is needed with 33Mhz PCI, but future 66Mhz access may need 486 a delay. Note that pre-2.0.34 kernels had a cache-alignment bug that 487 made udelay() unreliable. 488 The old method of using an ISA access as a delay, __SLOW_DOWN_IO__, is 489 deprecated. 490 */ 491 #define eeprom_delay(ee_addr) ioread32(ee_addr) 492 493 enum EEPROM_Ctrl_Bits { 494 EE_ShiftClk=0x02, EE_Write0=0x801, EE_Write1=0x805, 495 EE_ChipSelect=0x801, EE_DataIn=0x08, 496 }; 497 498 /* The EEPROM commands include the alway-set leading bit. */ 499 enum EEPROM_Cmds { 500 EE_WriteCmd=(5 << 6), EE_ReadCmd=(6 << 6), EE_EraseCmd=(7 << 6), 501 }; 502 503 static int eeprom_read(void __iomem *addr, int location) 504 { 505 int i; 506 int retval = 0; 507 void __iomem *ee_addr = addr + EECtrl; 508 int read_cmd = location | EE_ReadCmd; 509 iowrite32(EE_ChipSelect, ee_addr); 510 511 /* Shift the read command bits out. */ 512 for (i = 10; i >= 0; i--) { 513 short dataval = (read_cmd & (1 << i)) ? EE_Write1 : EE_Write0; 514 iowrite32(dataval, ee_addr); 515 eeprom_delay(ee_addr); 516 iowrite32(dataval | EE_ShiftClk, ee_addr); 517 eeprom_delay(ee_addr); 518 } 519 iowrite32(EE_ChipSelect, ee_addr); 520 eeprom_delay(ee_addr); 521 522 for (i = 16; i > 0; i--) { 523 iowrite32(EE_ChipSelect | EE_ShiftClk, ee_addr); 524 eeprom_delay(ee_addr); 525 retval = (retval << 1) | ((ioread32(ee_addr) & EE_DataIn) ? 1 : 0); 526 iowrite32(EE_ChipSelect, ee_addr); 527 eeprom_delay(ee_addr); 528 } 529 530 /* Terminate the EEPROM access. */ 531 iowrite32(0, ee_addr); 532 return retval; 533 } 534 535 /* MII transceiver control section. 536 Read and write the MII registers using software-generated serial 537 MDIO protocol. See the MII specifications or DP83840A data sheet 538 for details. 539 540 The maximum data clock rate is 2.5 Mhz. The minimum timing is usually 541 met by back-to-back 33Mhz PCI cycles. */ 542 #define mdio_delay(mdio_addr) ioread32(mdio_addr) 543 544 /* Set iff a MII transceiver on any interface requires mdio preamble. 545 This only set with older transceivers, so the extra 546 code size of a per-interface flag is not worthwhile. */ 547 static char mii_preamble_required = 1; 548 549 #define MDIO_WRITE0 (MDIO_EnbOutput) 550 #define MDIO_WRITE1 (MDIO_DataOut | MDIO_EnbOutput) 551 552 /* Generate the preamble required for initial synchronization and 553 a few older transceivers. */ 554 static void mdio_sync(void __iomem *mdio_addr) 555 { 556 int bits = 32; 557 558 /* Establish sync by sending at least 32 logic ones. */ 559 while (--bits >= 0) { 560 iowrite32(MDIO_WRITE1, mdio_addr); 561 mdio_delay(mdio_addr); 562 iowrite32(MDIO_WRITE1 | MDIO_ShiftClk, mdio_addr); 563 mdio_delay(mdio_addr); 564 } 565 } 566 567 static int mdio_read(struct net_device *dev, int phy_id, int location) 568 { 569 struct netdev_private *np = netdev_priv(dev); 570 void __iomem *mdio_addr = np->base_addr + MIICtrl; 571 int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location; 572 int i, retval = 0; 573 574 if (mii_preamble_required) 575 mdio_sync(mdio_addr); 576 577 /* Shift the read command bits out. */ 578 for (i = 15; i >= 0; i--) { 579 int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; 580 581 iowrite32(dataval, mdio_addr); 582 mdio_delay(mdio_addr); 583 iowrite32(dataval | MDIO_ShiftClk, mdio_addr); 584 mdio_delay(mdio_addr); 585 } 586 /* Read the two transition, 16 data, and wire-idle bits. */ 587 for (i = 20; i > 0; i--) { 588 iowrite32(MDIO_EnbIn, mdio_addr); 589 mdio_delay(mdio_addr); 590 retval = (retval << 1) | ((ioread32(mdio_addr) & MDIO_DataIn) ? 1 : 0); 591 iowrite32(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr); 592 mdio_delay(mdio_addr); 593 } 594 return (retval>>1) & 0xffff; 595 } 596 597 static void mdio_write(struct net_device *dev, int phy_id, int location, int value) 598 { 599 struct netdev_private *np = netdev_priv(dev); 600 void __iomem *mdio_addr = np->base_addr + MIICtrl; 601 int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location<<18) | value; 602 int i; 603 604 if (location == 4 && phy_id == np->phys[0]) 605 np->mii_if.advertising = value; 606 607 if (mii_preamble_required) 608 mdio_sync(mdio_addr); 609 610 /* Shift the command bits out. */ 611 for (i = 31; i >= 0; i--) { 612 int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; 613 614 iowrite32(dataval, mdio_addr); 615 mdio_delay(mdio_addr); 616 iowrite32(dataval | MDIO_ShiftClk, mdio_addr); 617 mdio_delay(mdio_addr); 618 } 619 /* Clear out extra bits. */ 620 for (i = 2; i > 0; i--) { 621 iowrite32(MDIO_EnbIn, mdio_addr); 622 mdio_delay(mdio_addr); 623 iowrite32(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr); 624 mdio_delay(mdio_addr); 625 } 626 } 627 628 629 static int netdev_open(struct net_device *dev) 630 { 631 struct netdev_private *np = netdev_priv(dev); 632 void __iomem *ioaddr = np->base_addr; 633 const int irq = np->pci_dev->irq; 634 int i; 635 636 iowrite32(0x00000001, ioaddr + PCIBusCfg); /* Reset */ 637 638 netif_device_detach(dev); 639 i = request_irq(irq, intr_handler, IRQF_SHARED, dev->name, dev); 640 if (i) 641 goto out_err; 642 643 if (debug > 1) 644 netdev_dbg(dev, "w89c840_open() irq %d\n", irq); 645 646 if((i=alloc_ringdesc(dev))) 647 goto out_err; 648 649 spin_lock_irq(&np->lock); 650 netif_device_attach(dev); 651 init_registers(dev); 652 spin_unlock_irq(&np->lock); 653 654 netif_start_queue(dev); 655 if (debug > 2) 656 netdev_dbg(dev, "Done netdev_open()\n"); 657 658 /* Set the timer to check for link beat. */ 659 init_timer(&np->timer); 660 np->timer.expires = jiffies + 1*HZ; 661 np->timer.data = (unsigned long)dev; 662 np->timer.function = netdev_timer; /* timer handler */ 663 add_timer(&np->timer); 664 return 0; 665 out_err: 666 netif_device_attach(dev); 667 return i; 668 } 669 670 #define MII_DAVICOM_DM9101 0x0181b800 671 672 static int update_link(struct net_device *dev) 673 { 674 struct netdev_private *np = netdev_priv(dev); 675 int duplex, fasteth, result, mii_reg; 676 677 /* BSMR */ 678 mii_reg = mdio_read(dev, np->phys[0], MII_BMSR); 679 680 if (mii_reg == 0xffff) 681 return np->csr6; 682 /* reread: the link status bit is sticky */ 683 mii_reg = mdio_read(dev, np->phys[0], MII_BMSR); 684 if (!(mii_reg & 0x4)) { 685 if (netif_carrier_ok(dev)) { 686 if (debug) 687 dev_info(&dev->dev, 688 "MII #%d reports no link. Disabling watchdog\n", 689 np->phys[0]); 690 netif_carrier_off(dev); 691 } 692 return np->csr6; 693 } 694 if (!netif_carrier_ok(dev)) { 695 if (debug) 696 dev_info(&dev->dev, 697 "MII #%d link is back. Enabling watchdog\n", 698 np->phys[0]); 699 netif_carrier_on(dev); 700 } 701 702 if ((np->mii & ~0xf) == MII_DAVICOM_DM9101) { 703 /* If the link partner doesn't support autonegotiation 704 * the MII detects it's abilities with the "parallel detection". 705 * Some MIIs update the LPA register to the result of the parallel 706 * detection, some don't. 707 * The Davicom PHY [at least 0181b800] doesn't. 708 * Instead bit 9 and 13 of the BMCR are updated to the result 709 * of the negotiation.. 710 */ 711 mii_reg = mdio_read(dev, np->phys[0], MII_BMCR); 712 duplex = mii_reg & BMCR_FULLDPLX; 713 fasteth = mii_reg & BMCR_SPEED100; 714 } else { 715 int negotiated; 716 mii_reg = mdio_read(dev, np->phys[0], MII_LPA); 717 negotiated = mii_reg & np->mii_if.advertising; 718 719 duplex = (negotiated & LPA_100FULL) || ((negotiated & 0x02C0) == LPA_10FULL); 720 fasteth = negotiated & 0x380; 721 } 722 duplex |= np->mii_if.force_media; 723 /* remove fastether and fullduplex */ 724 result = np->csr6 & ~0x20000200; 725 if (duplex) 726 result |= 0x200; 727 if (fasteth) 728 result |= 0x20000000; 729 if (result != np->csr6 && debug) 730 dev_info(&dev->dev, 731 "Setting %dMBit-%s-duplex based on MII#%d\n", 732 fasteth ? 100 : 10, duplex ? "full" : "half", 733 np->phys[0]); 734 return result; 735 } 736 737 #define RXTX_TIMEOUT 2000 738 static inline void update_csr6(struct net_device *dev, int new) 739 { 740 struct netdev_private *np = netdev_priv(dev); 741 void __iomem *ioaddr = np->base_addr; 742 int limit = RXTX_TIMEOUT; 743 744 if (!netif_device_present(dev)) 745 new = 0; 746 if (new==np->csr6) 747 return; 748 /* stop both Tx and Rx processes */ 749 iowrite32(np->csr6 & ~0x2002, ioaddr + NetworkConfig); 750 /* wait until they have really stopped */ 751 for (;;) { 752 int csr5 = ioread32(ioaddr + IntrStatus); 753 int t; 754 755 t = (csr5 >> 17) & 0x07; 756 if (t==0||t==1) { 757 /* rx stopped */ 758 t = (csr5 >> 20) & 0x07; 759 if (t==0||t==1) 760 break; 761 } 762 763 limit--; 764 if(!limit) { 765 dev_info(&dev->dev, 766 "couldn't stop rxtx, IntrStatus %xh\n", csr5); 767 break; 768 } 769 udelay(1); 770 } 771 np->csr6 = new; 772 /* and restart them with the new configuration */ 773 iowrite32(np->csr6, ioaddr + NetworkConfig); 774 if (new & 0x200) 775 np->mii_if.full_duplex = 1; 776 } 777 778 static void netdev_timer(unsigned long data) 779 { 780 struct net_device *dev = (struct net_device *)data; 781 struct netdev_private *np = netdev_priv(dev); 782 void __iomem *ioaddr = np->base_addr; 783 784 if (debug > 2) 785 netdev_dbg(dev, "Media selection timer tick, status %08x config %08x\n", 786 ioread32(ioaddr + IntrStatus), 787 ioread32(ioaddr + NetworkConfig)); 788 spin_lock_irq(&np->lock); 789 update_csr6(dev, update_link(dev)); 790 spin_unlock_irq(&np->lock); 791 np->timer.expires = jiffies + 10*HZ; 792 add_timer(&np->timer); 793 } 794 795 static void init_rxtx_rings(struct net_device *dev) 796 { 797 struct netdev_private *np = netdev_priv(dev); 798 int i; 799 800 np->rx_head_desc = &np->rx_ring[0]; 801 np->tx_ring = (struct w840_tx_desc*)&np->rx_ring[RX_RING_SIZE]; 802 803 /* Initial all Rx descriptors. */ 804 for (i = 0; i < RX_RING_SIZE; i++) { 805 np->rx_ring[i].length = np->rx_buf_sz; 806 np->rx_ring[i].status = 0; 807 np->rx_skbuff[i] = NULL; 808 } 809 /* Mark the last entry as wrapping the ring. */ 810 np->rx_ring[i-1].length |= DescEndRing; 811 812 /* Fill in the Rx buffers. Handle allocation failure gracefully. */ 813 for (i = 0; i < RX_RING_SIZE; i++) { 814 struct sk_buff *skb = netdev_alloc_skb(dev, np->rx_buf_sz); 815 np->rx_skbuff[i] = skb; 816 if (skb == NULL) 817 break; 818 np->rx_addr[i] = pci_map_single(np->pci_dev,skb->data, 819 np->rx_buf_sz,PCI_DMA_FROMDEVICE); 820 821 np->rx_ring[i].buffer1 = np->rx_addr[i]; 822 np->rx_ring[i].status = DescOwned; 823 } 824 825 np->cur_rx = 0; 826 np->dirty_rx = (unsigned int)(i - RX_RING_SIZE); 827 828 /* Initialize the Tx descriptors */ 829 for (i = 0; i < TX_RING_SIZE; i++) { 830 np->tx_skbuff[i] = NULL; 831 np->tx_ring[i].status = 0; 832 } 833 np->tx_full = 0; 834 np->tx_q_bytes = np->dirty_tx = np->cur_tx = 0; 835 836 iowrite32(np->ring_dma_addr, np->base_addr + RxRingPtr); 837 iowrite32(np->ring_dma_addr+sizeof(struct w840_rx_desc)*RX_RING_SIZE, 838 np->base_addr + TxRingPtr); 839 840 } 841 842 static void free_rxtx_rings(struct netdev_private* np) 843 { 844 int i; 845 /* Free all the skbuffs in the Rx queue. */ 846 for (i = 0; i < RX_RING_SIZE; i++) { 847 np->rx_ring[i].status = 0; 848 if (np->rx_skbuff[i]) { 849 pci_unmap_single(np->pci_dev, 850 np->rx_addr[i], 851 np->rx_skbuff[i]->len, 852 PCI_DMA_FROMDEVICE); 853 dev_kfree_skb(np->rx_skbuff[i]); 854 } 855 np->rx_skbuff[i] = NULL; 856 } 857 for (i = 0; i < TX_RING_SIZE; i++) { 858 if (np->tx_skbuff[i]) { 859 pci_unmap_single(np->pci_dev, 860 np->tx_addr[i], 861 np->tx_skbuff[i]->len, 862 PCI_DMA_TODEVICE); 863 dev_kfree_skb(np->tx_skbuff[i]); 864 } 865 np->tx_skbuff[i] = NULL; 866 } 867 } 868 869 static void init_registers(struct net_device *dev) 870 { 871 struct netdev_private *np = netdev_priv(dev); 872 void __iomem *ioaddr = np->base_addr; 873 int i; 874 875 for (i = 0; i < 6; i++) 876 iowrite8(dev->dev_addr[i], ioaddr + StationAddr + i); 877 878 /* Initialize other registers. */ 879 #ifdef __BIG_ENDIAN 880 i = (1<<20); /* Big-endian descriptors */ 881 #else 882 i = 0; 883 #endif 884 i |= (0x04<<2); /* skip length 4 u32 */ 885 i |= 0x02; /* give Rx priority */ 886 887 /* Configure the PCI bus bursts and FIFO thresholds. 888 486: Set 8 longword cache alignment, 8 longword burst. 889 586: Set 16 longword cache alignment, no burst limit. 890 Cache alignment bits 15:14 Burst length 13:8 891 0000 <not allowed> 0000 align to cache 0800 8 longwords 892 4000 8 longwords 0100 1 longword 1000 16 longwords 893 8000 16 longwords 0200 2 longwords 2000 32 longwords 894 C000 32 longwords 0400 4 longwords */ 895 896 #if defined (__i386__) && !defined(MODULE) 897 /* When not a module we can work around broken '486 PCI boards. */ 898 if (boot_cpu_data.x86 <= 4) { 899 i |= 0x4800; 900 dev_info(&dev->dev, 901 "This is a 386/486 PCI system, setting cache alignment to 8 longwords\n"); 902 } else { 903 i |= 0xE000; 904 } 905 #elif defined(__powerpc__) || defined(__i386__) || defined(__alpha__) || defined(__ia64__) || defined(__x86_64__) 906 i |= 0xE000; 907 #elif defined(CONFIG_SPARC) || defined (CONFIG_PARISC) 908 i |= 0x4800; 909 #else 910 #warning Processor architecture undefined 911 i |= 0x4800; 912 #endif 913 iowrite32(i, ioaddr + PCIBusCfg); 914 915 np->csr6 = 0; 916 /* 128 byte Tx threshold; 917 Transmit on; Receive on; */ 918 update_csr6(dev, 0x00022002 | update_link(dev) | __set_rx_mode(dev)); 919 920 /* Clear and Enable interrupts by setting the interrupt mask. */ 921 iowrite32(0x1A0F5, ioaddr + IntrStatus); 922 iowrite32(0x1A0F5, ioaddr + IntrEnable); 923 924 iowrite32(0, ioaddr + RxStartDemand); 925 } 926 927 static void tx_timeout(struct net_device *dev) 928 { 929 struct netdev_private *np = netdev_priv(dev); 930 void __iomem *ioaddr = np->base_addr; 931 const int irq = np->pci_dev->irq; 932 933 dev_warn(&dev->dev, "Transmit timed out, status %08x, resetting...\n", 934 ioread32(ioaddr + IntrStatus)); 935 936 { 937 int i; 938 printk(KERN_DEBUG " Rx ring %p: ", np->rx_ring); 939 for (i = 0; i < RX_RING_SIZE; i++) 940 printk(KERN_CONT " %08x", (unsigned int)np->rx_ring[i].status); 941 printk(KERN_CONT "\n"); 942 printk(KERN_DEBUG " Tx ring %p: ", np->tx_ring); 943 for (i = 0; i < TX_RING_SIZE; i++) 944 printk(KERN_CONT " %08x", np->tx_ring[i].status); 945 printk(KERN_CONT "\n"); 946 } 947 printk(KERN_DEBUG "Tx cur %d Tx dirty %d Tx Full %d, q bytes %d\n", 948 np->cur_tx, np->dirty_tx, np->tx_full, np->tx_q_bytes); 949 printk(KERN_DEBUG "Tx Descriptor addr %xh\n", ioread32(ioaddr+0x4C)); 950 951 disable_irq(irq); 952 spin_lock_irq(&np->lock); 953 /* 954 * Under high load dirty_tx and the internal tx descriptor pointer 955 * come out of sync, thus perform a software reset and reinitialize 956 * everything. 957 */ 958 959 iowrite32(1, np->base_addr+PCIBusCfg); 960 udelay(1); 961 962 free_rxtx_rings(np); 963 init_rxtx_rings(dev); 964 init_registers(dev); 965 spin_unlock_irq(&np->lock); 966 enable_irq(irq); 967 968 netif_wake_queue(dev); 969 dev->trans_start = jiffies; /* prevent tx timeout */ 970 np->stats.tx_errors++; 971 } 972 973 /* Initialize the Rx and Tx rings, along with various 'dev' bits. */ 974 static int alloc_ringdesc(struct net_device *dev) 975 { 976 struct netdev_private *np = netdev_priv(dev); 977 978 np->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32); 979 980 np->rx_ring = pci_alloc_consistent(np->pci_dev, 981 sizeof(struct w840_rx_desc)*RX_RING_SIZE + 982 sizeof(struct w840_tx_desc)*TX_RING_SIZE, 983 &np->ring_dma_addr); 984 if(!np->rx_ring) 985 return -ENOMEM; 986 init_rxtx_rings(dev); 987 return 0; 988 } 989 990 static void free_ringdesc(struct netdev_private *np) 991 { 992 pci_free_consistent(np->pci_dev, 993 sizeof(struct w840_rx_desc)*RX_RING_SIZE + 994 sizeof(struct w840_tx_desc)*TX_RING_SIZE, 995 np->rx_ring, np->ring_dma_addr); 996 997 } 998 999 static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev) 1000 { 1001 struct netdev_private *np = netdev_priv(dev); 1002 unsigned entry; 1003 1004 /* Caution: the write order is important here, set the field 1005 with the "ownership" bits last. */ 1006 1007 /* Calculate the next Tx descriptor entry. */ 1008 entry = np->cur_tx % TX_RING_SIZE; 1009 1010 np->tx_addr[entry] = pci_map_single(np->pci_dev, 1011 skb->data,skb->len, PCI_DMA_TODEVICE); 1012 np->tx_skbuff[entry] = skb; 1013 1014 np->tx_ring[entry].buffer1 = np->tx_addr[entry]; 1015 if (skb->len < TX_BUFLIMIT) { 1016 np->tx_ring[entry].length = DescWholePkt | skb->len; 1017 } else { 1018 int len = skb->len - TX_BUFLIMIT; 1019 1020 np->tx_ring[entry].buffer2 = np->tx_addr[entry]+TX_BUFLIMIT; 1021 np->tx_ring[entry].length = DescWholePkt | (len << 11) | TX_BUFLIMIT; 1022 } 1023 if(entry == TX_RING_SIZE-1) 1024 np->tx_ring[entry].length |= DescEndRing; 1025 1026 /* Now acquire the irq spinlock. 1027 * The difficult race is the ordering between 1028 * increasing np->cur_tx and setting DescOwned: 1029 * - if np->cur_tx is increased first the interrupt 1030 * handler could consider the packet as transmitted 1031 * since DescOwned is cleared. 1032 * - If DescOwned is set first the NIC could report the 1033 * packet as sent, but the interrupt handler would ignore it 1034 * since the np->cur_tx was not yet increased. 1035 */ 1036 spin_lock_irq(&np->lock); 1037 np->cur_tx++; 1038 1039 wmb(); /* flush length, buffer1, buffer2 */ 1040 np->tx_ring[entry].status = DescOwned; 1041 wmb(); /* flush status and kick the hardware */ 1042 iowrite32(0, np->base_addr + TxStartDemand); 1043 np->tx_q_bytes += skb->len; 1044 /* Work around horrible bug in the chip by marking the queue as full 1045 when we do not have FIFO room for a maximum sized packet. */ 1046 if (np->cur_tx - np->dirty_tx > TX_QUEUE_LEN || 1047 ((np->drv_flags & HasBrokenTx) && np->tx_q_bytes > TX_BUG_FIFO_LIMIT)) { 1048 netif_stop_queue(dev); 1049 wmb(); 1050 np->tx_full = 1; 1051 } 1052 spin_unlock_irq(&np->lock); 1053 1054 if (debug > 4) { 1055 netdev_dbg(dev, "Transmit frame #%d queued in slot %d\n", 1056 np->cur_tx, entry); 1057 } 1058 return NETDEV_TX_OK; 1059 } 1060 1061 static void netdev_tx_done(struct net_device *dev) 1062 { 1063 struct netdev_private *np = netdev_priv(dev); 1064 for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) { 1065 int entry = np->dirty_tx % TX_RING_SIZE; 1066 int tx_status = np->tx_ring[entry].status; 1067 1068 if (tx_status < 0) 1069 break; 1070 if (tx_status & 0x8000) { /* There was an error, log it. */ 1071 #ifndef final_version 1072 if (debug > 1) 1073 netdev_dbg(dev, "Transmit error, Tx status %08x\n", 1074 tx_status); 1075 #endif 1076 np->stats.tx_errors++; 1077 if (tx_status & 0x0104) np->stats.tx_aborted_errors++; 1078 if (tx_status & 0x0C80) np->stats.tx_carrier_errors++; 1079 if (tx_status & 0x0200) np->stats.tx_window_errors++; 1080 if (tx_status & 0x0002) np->stats.tx_fifo_errors++; 1081 if ((tx_status & 0x0080) && np->mii_if.full_duplex == 0) 1082 np->stats.tx_heartbeat_errors++; 1083 } else { 1084 #ifndef final_version 1085 if (debug > 3) 1086 netdev_dbg(dev, "Transmit slot %d ok, Tx status %08x\n", 1087 entry, tx_status); 1088 #endif 1089 np->stats.tx_bytes += np->tx_skbuff[entry]->len; 1090 np->stats.collisions += (tx_status >> 3) & 15; 1091 np->stats.tx_packets++; 1092 } 1093 /* Free the original skb. */ 1094 pci_unmap_single(np->pci_dev,np->tx_addr[entry], 1095 np->tx_skbuff[entry]->len, 1096 PCI_DMA_TODEVICE); 1097 np->tx_q_bytes -= np->tx_skbuff[entry]->len; 1098 dev_kfree_skb_irq(np->tx_skbuff[entry]); 1099 np->tx_skbuff[entry] = NULL; 1100 } 1101 if (np->tx_full && 1102 np->cur_tx - np->dirty_tx < TX_QUEUE_LEN_RESTART && 1103 np->tx_q_bytes < TX_BUG_FIFO_LIMIT) { 1104 /* The ring is no longer full, clear tbusy. */ 1105 np->tx_full = 0; 1106 wmb(); 1107 netif_wake_queue(dev); 1108 } 1109 } 1110 1111 /* The interrupt handler does all of the Rx thread work and cleans up 1112 after the Tx thread. */ 1113 static irqreturn_t intr_handler(int irq, void *dev_instance) 1114 { 1115 struct net_device *dev = (struct net_device *)dev_instance; 1116 struct netdev_private *np = netdev_priv(dev); 1117 void __iomem *ioaddr = np->base_addr; 1118 int work_limit = max_interrupt_work; 1119 int handled = 0; 1120 1121 if (!netif_device_present(dev)) 1122 return IRQ_NONE; 1123 do { 1124 u32 intr_status = ioread32(ioaddr + IntrStatus); 1125 1126 /* Acknowledge all of the current interrupt sources ASAP. */ 1127 iowrite32(intr_status & 0x001ffff, ioaddr + IntrStatus); 1128 1129 if (debug > 4) 1130 netdev_dbg(dev, "Interrupt, status %04x\n", intr_status); 1131 1132 if ((intr_status & (NormalIntr|AbnormalIntr)) == 0) 1133 break; 1134 1135 handled = 1; 1136 1137 if (intr_status & (RxIntr | RxNoBuf)) 1138 netdev_rx(dev); 1139 if (intr_status & RxNoBuf) 1140 iowrite32(0, ioaddr + RxStartDemand); 1141 1142 if (intr_status & (TxNoBuf | TxIntr) && 1143 np->cur_tx != np->dirty_tx) { 1144 spin_lock(&np->lock); 1145 netdev_tx_done(dev); 1146 spin_unlock(&np->lock); 1147 } 1148 1149 /* Abnormal error summary/uncommon events handlers. */ 1150 if (intr_status & (AbnormalIntr | TxFIFOUnderflow | SystemError | 1151 TimerInt | TxDied)) 1152 netdev_error(dev, intr_status); 1153 1154 if (--work_limit < 0) { 1155 dev_warn(&dev->dev, 1156 "Too much work at interrupt, status=0x%04x\n", 1157 intr_status); 1158 /* Set the timer to re-enable the other interrupts after 1159 10*82usec ticks. */ 1160 spin_lock(&np->lock); 1161 if (netif_device_present(dev)) { 1162 iowrite32(AbnormalIntr | TimerInt, ioaddr + IntrEnable); 1163 iowrite32(10, ioaddr + GPTimer); 1164 } 1165 spin_unlock(&np->lock); 1166 break; 1167 } 1168 } while (1); 1169 1170 if (debug > 3) 1171 netdev_dbg(dev, "exiting interrupt, status=%#4.4x\n", 1172 ioread32(ioaddr + IntrStatus)); 1173 return IRQ_RETVAL(handled); 1174 } 1175 1176 /* This routine is logically part of the interrupt handler, but separated 1177 for clarity and better register allocation. */ 1178 static int netdev_rx(struct net_device *dev) 1179 { 1180 struct netdev_private *np = netdev_priv(dev); 1181 int entry = np->cur_rx % RX_RING_SIZE; 1182 int work_limit = np->dirty_rx + RX_RING_SIZE - np->cur_rx; 1183 1184 if (debug > 4) { 1185 netdev_dbg(dev, " In netdev_rx(), entry %d status %04x\n", 1186 entry, np->rx_ring[entry].status); 1187 } 1188 1189 /* If EOP is set on the next entry, it's a new packet. Send it up. */ 1190 while (--work_limit >= 0) { 1191 struct w840_rx_desc *desc = np->rx_head_desc; 1192 s32 status = desc->status; 1193 1194 if (debug > 4) 1195 netdev_dbg(dev, " netdev_rx() status was %08x\n", 1196 status); 1197 if (status < 0) 1198 break; 1199 if ((status & 0x38008300) != 0x0300) { 1200 if ((status & 0x38000300) != 0x0300) { 1201 /* Ingore earlier buffers. */ 1202 if ((status & 0xffff) != 0x7fff) { 1203 dev_warn(&dev->dev, 1204 "Oversized Ethernet frame spanned multiple buffers, entry %#x status %04x!\n", 1205 np->cur_rx, status); 1206 np->stats.rx_length_errors++; 1207 } 1208 } else if (status & 0x8000) { 1209 /* There was a fatal error. */ 1210 if (debug > 2) 1211 netdev_dbg(dev, "Receive error, Rx status %08x\n", 1212 status); 1213 np->stats.rx_errors++; /* end of a packet.*/ 1214 if (status & 0x0890) np->stats.rx_length_errors++; 1215 if (status & 0x004C) np->stats.rx_frame_errors++; 1216 if (status & 0x0002) np->stats.rx_crc_errors++; 1217 } 1218 } else { 1219 struct sk_buff *skb; 1220 /* Omit the four octet CRC from the length. */ 1221 int pkt_len = ((status >> 16) & 0x7ff) - 4; 1222 1223 #ifndef final_version 1224 if (debug > 4) 1225 netdev_dbg(dev, " netdev_rx() normal Rx pkt length %d status %x\n", 1226 pkt_len, status); 1227 #endif 1228 /* Check if the packet is long enough to accept without copying 1229 to a minimally-sized skbuff. */ 1230 if (pkt_len < rx_copybreak && 1231 (skb = netdev_alloc_skb(dev, pkt_len + 2)) != NULL) { 1232 skb_reserve(skb, 2); /* 16 byte align the IP header */ 1233 pci_dma_sync_single_for_cpu(np->pci_dev,np->rx_addr[entry], 1234 np->rx_skbuff[entry]->len, 1235 PCI_DMA_FROMDEVICE); 1236 skb_copy_to_linear_data(skb, np->rx_skbuff[entry]->data, pkt_len); 1237 skb_put(skb, pkt_len); 1238 pci_dma_sync_single_for_device(np->pci_dev,np->rx_addr[entry], 1239 np->rx_skbuff[entry]->len, 1240 PCI_DMA_FROMDEVICE); 1241 } else { 1242 pci_unmap_single(np->pci_dev,np->rx_addr[entry], 1243 np->rx_skbuff[entry]->len, 1244 PCI_DMA_FROMDEVICE); 1245 skb_put(skb = np->rx_skbuff[entry], pkt_len); 1246 np->rx_skbuff[entry] = NULL; 1247 } 1248 #ifndef final_version /* Remove after testing. */ 1249 /* You will want this info for the initial debug. */ 1250 if (debug > 5) 1251 netdev_dbg(dev, " Rx data %pM %pM %02x%02x %pI4\n", 1252 &skb->data[0], &skb->data[6], 1253 skb->data[12], skb->data[13], 1254 &skb->data[14]); 1255 #endif 1256 skb->protocol = eth_type_trans(skb, dev); 1257 netif_rx(skb); 1258 np->stats.rx_packets++; 1259 np->stats.rx_bytes += pkt_len; 1260 } 1261 entry = (++np->cur_rx) % RX_RING_SIZE; 1262 np->rx_head_desc = &np->rx_ring[entry]; 1263 } 1264 1265 /* Refill the Rx ring buffers. */ 1266 for (; np->cur_rx - np->dirty_rx > 0; np->dirty_rx++) { 1267 struct sk_buff *skb; 1268 entry = np->dirty_rx % RX_RING_SIZE; 1269 if (np->rx_skbuff[entry] == NULL) { 1270 skb = netdev_alloc_skb(dev, np->rx_buf_sz); 1271 np->rx_skbuff[entry] = skb; 1272 if (skb == NULL) 1273 break; /* Better luck next round. */ 1274 np->rx_addr[entry] = pci_map_single(np->pci_dev, 1275 skb->data, 1276 np->rx_buf_sz, PCI_DMA_FROMDEVICE); 1277 np->rx_ring[entry].buffer1 = np->rx_addr[entry]; 1278 } 1279 wmb(); 1280 np->rx_ring[entry].status = DescOwned; 1281 } 1282 1283 return 0; 1284 } 1285 1286 static void netdev_error(struct net_device *dev, int intr_status) 1287 { 1288 struct netdev_private *np = netdev_priv(dev); 1289 void __iomem *ioaddr = np->base_addr; 1290 1291 if (debug > 2) 1292 netdev_dbg(dev, "Abnormal event, %08x\n", intr_status); 1293 if (intr_status == 0xffffffff) 1294 return; 1295 spin_lock(&np->lock); 1296 if (intr_status & TxFIFOUnderflow) { 1297 int new; 1298 /* Bump up the Tx threshold */ 1299 #if 0 1300 /* This causes lots of dropped packets, 1301 * and under high load even tx_timeouts 1302 */ 1303 new = np->csr6 + 0x4000; 1304 #else 1305 new = (np->csr6 >> 14)&0x7f; 1306 if (new < 64) 1307 new *= 2; 1308 else 1309 new = 127; /* load full packet before starting */ 1310 new = (np->csr6 & ~(0x7F << 14)) | (new<<14); 1311 #endif 1312 netdev_dbg(dev, "Tx underflow, new csr6 %08x\n", new); 1313 update_csr6(dev, new); 1314 } 1315 if (intr_status & RxDied) { /* Missed a Rx frame. */ 1316 np->stats.rx_errors++; 1317 } 1318 if (intr_status & TimerInt) { 1319 /* Re-enable other interrupts. */ 1320 if (netif_device_present(dev)) 1321 iowrite32(0x1A0F5, ioaddr + IntrEnable); 1322 } 1323 np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff; 1324 iowrite32(0, ioaddr + RxStartDemand); 1325 spin_unlock(&np->lock); 1326 } 1327 1328 static struct net_device_stats *get_stats(struct net_device *dev) 1329 { 1330 struct netdev_private *np = netdev_priv(dev); 1331 void __iomem *ioaddr = np->base_addr; 1332 1333 /* The chip only need report frame silently dropped. */ 1334 spin_lock_irq(&np->lock); 1335 if (netif_running(dev) && netif_device_present(dev)) 1336 np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff; 1337 spin_unlock_irq(&np->lock); 1338 1339 return &np->stats; 1340 } 1341 1342 1343 static u32 __set_rx_mode(struct net_device *dev) 1344 { 1345 struct netdev_private *np = netdev_priv(dev); 1346 void __iomem *ioaddr = np->base_addr; 1347 u32 mc_filter[2]; /* Multicast hash filter */ 1348 u32 rx_mode; 1349 1350 if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ 1351 memset(mc_filter, 0xff, sizeof(mc_filter)); 1352 rx_mode = RxAcceptBroadcast | AcceptMulticast | RxAcceptAllPhys 1353 | AcceptMyPhys; 1354 } else if ((netdev_mc_count(dev) > multicast_filter_limit) || 1355 (dev->flags & IFF_ALLMULTI)) { 1356 /* Too many to match, or accept all multicasts. */ 1357 memset(mc_filter, 0xff, sizeof(mc_filter)); 1358 rx_mode = RxAcceptBroadcast | AcceptMulticast | AcceptMyPhys; 1359 } else { 1360 struct netdev_hw_addr *ha; 1361 1362 memset(mc_filter, 0, sizeof(mc_filter)); 1363 netdev_for_each_mc_addr(ha, dev) { 1364 int filbit; 1365 1366 filbit = (ether_crc(ETH_ALEN, ha->addr) >> 26) ^ 0x3F; 1367 filbit &= 0x3f; 1368 mc_filter[filbit >> 5] |= 1 << (filbit & 31); 1369 } 1370 rx_mode = RxAcceptBroadcast | AcceptMulticast | AcceptMyPhys; 1371 } 1372 iowrite32(mc_filter[0], ioaddr + MulticastFilter0); 1373 iowrite32(mc_filter[1], ioaddr + MulticastFilter1); 1374 return rx_mode; 1375 } 1376 1377 static void set_rx_mode(struct net_device *dev) 1378 { 1379 struct netdev_private *np = netdev_priv(dev); 1380 u32 rx_mode = __set_rx_mode(dev); 1381 spin_lock_irq(&np->lock); 1382 update_csr6(dev, (np->csr6 & ~0x00F8) | rx_mode); 1383 spin_unlock_irq(&np->lock); 1384 } 1385 1386 static void netdev_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info) 1387 { 1388 struct netdev_private *np = netdev_priv(dev); 1389 1390 strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); 1391 strlcpy(info->version, DRV_VERSION, sizeof(info->version)); 1392 strlcpy(info->bus_info, pci_name(np->pci_dev), sizeof(info->bus_info)); 1393 } 1394 1395 static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) 1396 { 1397 struct netdev_private *np = netdev_priv(dev); 1398 int rc; 1399 1400 spin_lock_irq(&np->lock); 1401 rc = mii_ethtool_gset(&np->mii_if, cmd); 1402 spin_unlock_irq(&np->lock); 1403 1404 return rc; 1405 } 1406 1407 static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) 1408 { 1409 struct netdev_private *np = netdev_priv(dev); 1410 int rc; 1411 1412 spin_lock_irq(&np->lock); 1413 rc = mii_ethtool_sset(&np->mii_if, cmd); 1414 spin_unlock_irq(&np->lock); 1415 1416 return rc; 1417 } 1418 1419 static int netdev_nway_reset(struct net_device *dev) 1420 { 1421 struct netdev_private *np = netdev_priv(dev); 1422 return mii_nway_restart(&np->mii_if); 1423 } 1424 1425 static u32 netdev_get_link(struct net_device *dev) 1426 { 1427 struct netdev_private *np = netdev_priv(dev); 1428 return mii_link_ok(&np->mii_if); 1429 } 1430 1431 static u32 netdev_get_msglevel(struct net_device *dev) 1432 { 1433 return debug; 1434 } 1435 1436 static void netdev_set_msglevel(struct net_device *dev, u32 value) 1437 { 1438 debug = value; 1439 } 1440 1441 static const struct ethtool_ops netdev_ethtool_ops = { 1442 .get_drvinfo = netdev_get_drvinfo, 1443 .get_settings = netdev_get_settings, 1444 .set_settings = netdev_set_settings, 1445 .nway_reset = netdev_nway_reset, 1446 .get_link = netdev_get_link, 1447 .get_msglevel = netdev_get_msglevel, 1448 .set_msglevel = netdev_set_msglevel, 1449 }; 1450 1451 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) 1452 { 1453 struct mii_ioctl_data *data = if_mii(rq); 1454 struct netdev_private *np = netdev_priv(dev); 1455 1456 switch(cmd) { 1457 case SIOCGMIIPHY: /* Get address of MII PHY in use. */ 1458 data->phy_id = ((struct netdev_private *)netdev_priv(dev))->phys[0] & 0x1f; 1459 /* Fall Through */ 1460 1461 case SIOCGMIIREG: /* Read MII PHY register. */ 1462 spin_lock_irq(&np->lock); 1463 data->val_out = mdio_read(dev, data->phy_id & 0x1f, data->reg_num & 0x1f); 1464 spin_unlock_irq(&np->lock); 1465 return 0; 1466 1467 case SIOCSMIIREG: /* Write MII PHY register. */ 1468 spin_lock_irq(&np->lock); 1469 mdio_write(dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in); 1470 spin_unlock_irq(&np->lock); 1471 return 0; 1472 default: 1473 return -EOPNOTSUPP; 1474 } 1475 } 1476 1477 static int netdev_close(struct net_device *dev) 1478 { 1479 struct netdev_private *np = netdev_priv(dev); 1480 void __iomem *ioaddr = np->base_addr; 1481 1482 netif_stop_queue(dev); 1483 1484 if (debug > 1) { 1485 netdev_dbg(dev, "Shutting down ethercard, status was %08x Config %08x\n", 1486 ioread32(ioaddr + IntrStatus), 1487 ioread32(ioaddr + NetworkConfig)); 1488 netdev_dbg(dev, "Queue pointers were Tx %d / %d, Rx %d / %d\n", 1489 np->cur_tx, np->dirty_tx, 1490 np->cur_rx, np->dirty_rx); 1491 } 1492 1493 /* Stop the chip's Tx and Rx processes. */ 1494 spin_lock_irq(&np->lock); 1495 netif_device_detach(dev); 1496 update_csr6(dev, 0); 1497 iowrite32(0x0000, ioaddr + IntrEnable); 1498 spin_unlock_irq(&np->lock); 1499 1500 free_irq(np->pci_dev->irq, dev); 1501 wmb(); 1502 netif_device_attach(dev); 1503 1504 if (ioread32(ioaddr + NetworkConfig) != 0xffffffff) 1505 np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff; 1506 1507 #ifdef __i386__ 1508 if (debug > 2) { 1509 int i; 1510 1511 printk(KERN_DEBUG" Tx ring at %p:\n", np->tx_ring); 1512 for (i = 0; i < TX_RING_SIZE; i++) 1513 printk(KERN_DEBUG " #%d desc. %04x %04x %08x\n", 1514 i, np->tx_ring[i].length, 1515 np->tx_ring[i].status, np->tx_ring[i].buffer1); 1516 printk(KERN_DEBUG " Rx ring %p:\n", np->rx_ring); 1517 for (i = 0; i < RX_RING_SIZE; i++) { 1518 printk(KERN_DEBUG " #%d desc. %04x %04x %08x\n", 1519 i, np->rx_ring[i].length, 1520 np->rx_ring[i].status, np->rx_ring[i].buffer1); 1521 } 1522 } 1523 #endif /* __i386__ debugging only */ 1524 1525 del_timer_sync(&np->timer); 1526 1527 free_rxtx_rings(np); 1528 free_ringdesc(np); 1529 1530 return 0; 1531 } 1532 1533 static void w840_remove1(struct pci_dev *pdev) 1534 { 1535 struct net_device *dev = pci_get_drvdata(pdev); 1536 1537 if (dev) { 1538 struct netdev_private *np = netdev_priv(dev); 1539 unregister_netdev(dev); 1540 pci_release_regions(pdev); 1541 pci_iounmap(pdev, np->base_addr); 1542 free_netdev(dev); 1543 } 1544 } 1545 1546 #ifdef CONFIG_PM 1547 1548 /* 1549 * suspend/resume synchronization: 1550 * - open, close, do_ioctl: 1551 * rtnl_lock, & netif_device_detach after the rtnl_unlock. 1552 * - get_stats: 1553 * spin_lock_irq(np->lock), doesn't touch hw if not present 1554 * - start_xmit: 1555 * synchronize_irq + netif_tx_disable; 1556 * - tx_timeout: 1557 * netif_device_detach + netif_tx_disable; 1558 * - set_multicast_list 1559 * netif_device_detach + netif_tx_disable; 1560 * - interrupt handler 1561 * doesn't touch hw if not present, synchronize_irq waits for 1562 * running instances of the interrupt handler. 1563 * 1564 * Disabling hw requires clearing csr6 & IntrEnable. 1565 * update_csr6 & all function that write IntrEnable check netif_device_present 1566 * before settings any bits. 1567 * 1568 * Detach must occur under spin_unlock_irq(), interrupts from a detached 1569 * device would cause an irq storm. 1570 */ 1571 static int w840_suspend (struct pci_dev *pdev, pm_message_t state) 1572 { 1573 struct net_device *dev = pci_get_drvdata (pdev); 1574 struct netdev_private *np = netdev_priv(dev); 1575 void __iomem *ioaddr = np->base_addr; 1576 1577 rtnl_lock(); 1578 if (netif_running (dev)) { 1579 del_timer_sync(&np->timer); 1580 1581 spin_lock_irq(&np->lock); 1582 netif_device_detach(dev); 1583 update_csr6(dev, 0); 1584 iowrite32(0, ioaddr + IntrEnable); 1585 spin_unlock_irq(&np->lock); 1586 1587 synchronize_irq(np->pci_dev->irq); 1588 netif_tx_disable(dev); 1589 1590 np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff; 1591 1592 /* no more hardware accesses behind this line. */ 1593 1594 BUG_ON(np->csr6 || ioread32(ioaddr + IntrEnable)); 1595 1596 /* pci_power_off(pdev, -1); */ 1597 1598 free_rxtx_rings(np); 1599 } else { 1600 netif_device_detach(dev); 1601 } 1602 rtnl_unlock(); 1603 return 0; 1604 } 1605 1606 static int w840_resume (struct pci_dev *pdev) 1607 { 1608 struct net_device *dev = pci_get_drvdata (pdev); 1609 struct netdev_private *np = netdev_priv(dev); 1610 int retval = 0; 1611 1612 rtnl_lock(); 1613 if (netif_device_present(dev)) 1614 goto out; /* device not suspended */ 1615 if (netif_running(dev)) { 1616 if ((retval = pci_enable_device(pdev))) { 1617 dev_err(&dev->dev, 1618 "pci_enable_device failed in resume\n"); 1619 goto out; 1620 } 1621 spin_lock_irq(&np->lock); 1622 iowrite32(1, np->base_addr+PCIBusCfg); 1623 ioread32(np->base_addr+PCIBusCfg); 1624 udelay(1); 1625 netif_device_attach(dev); 1626 init_rxtx_rings(dev); 1627 init_registers(dev); 1628 spin_unlock_irq(&np->lock); 1629 1630 netif_wake_queue(dev); 1631 1632 mod_timer(&np->timer, jiffies + 1*HZ); 1633 } else { 1634 netif_device_attach(dev); 1635 } 1636 out: 1637 rtnl_unlock(); 1638 return retval; 1639 } 1640 #endif 1641 1642 static struct pci_driver w840_driver = { 1643 .name = DRV_NAME, 1644 .id_table = w840_pci_tbl, 1645 .probe = w840_probe1, 1646 .remove = w840_remove1, 1647 #ifdef CONFIG_PM 1648 .suspend = w840_suspend, 1649 .resume = w840_resume, 1650 #endif 1651 }; 1652 1653 static int __init w840_init(void) 1654 { 1655 printk(version); 1656 return pci_register_driver(&w840_driver); 1657 } 1658 1659 static void __exit w840_exit(void) 1660 { 1661 pci_unregister_driver(&w840_driver); 1662 } 1663 1664 module_init(w840_init); 1665 module_exit(w840_exit); 1666