1 /* Copyright, 1988-1992, Russell Nelson, Crynwr Software 2 3 This program is free software; you can redistribute it and/or modify 4 it under the terms of the GNU General Public License as published by 5 the Free Software Foundation, version 1. 6 7 This program is distributed in the hope that it will be useful, 8 but WITHOUT ANY WARRANTY; without even the implied warranty of 9 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 10 GNU General Public License for more details. 11 12 You should have received a copy of the GNU General Public License 13 along with this program; if not, write to the Free Software 14 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 15 */ 16 17 18 #define PP_ChipID 0x0000 /* offset 0h -> Corp -ID */ 19 /* offset 2h -> Model/Product Number */ 20 /* offset 3h -> Chip Revision Number */ 21 22 #define PP_ISAIOB 0x0020 /* IO base address */ 23 #define PP_CS8900_ISAINT 0x0022 /* ISA interrupt select */ 24 #define PP_CS8920_ISAINT 0x0370 /* ISA interrupt select */ 25 #define PP_CS8900_ISADMA 0x0024 /* ISA Rec DMA channel */ 26 #define PP_CS8920_ISADMA 0x0374 /* ISA Rec DMA channel */ 27 #define PP_ISASOF 0x0026 /* ISA DMA offset */ 28 #define PP_DmaFrameCnt 0x0028 /* ISA DMA Frame count */ 29 #define PP_DmaByteCnt 0x002A /* ISA DMA Byte count */ 30 #define PP_CS8900_ISAMemB 0x002C /* Memory base */ 31 #define PP_CS8920_ISAMemB 0x0348 /* */ 32 33 #define PP_ISABootBase 0x0030 /* Boot Prom base */ 34 #define PP_ISABootMask 0x0034 /* Boot Prom Mask */ 35 36 /* EEPROM data and command registers */ 37 #define PP_EECMD 0x0040 /* NVR Interface Command register */ 38 #define PP_EEData 0x0042 /* NVR Interface Data Register */ 39 #define PP_DebugReg 0x0044 /* Debug Register */ 40 41 #define PP_RxCFG 0x0102 /* Rx Bus config */ 42 #define PP_RxCTL 0x0104 /* Receive Control Register */ 43 #define PP_TxCFG 0x0106 /* Transmit Config Register */ 44 #define PP_TxCMD 0x0108 /* Transmit Command Register */ 45 #define PP_BufCFG 0x010A /* Bus configuration Register */ 46 #define PP_LineCTL 0x0112 /* Line Config Register */ 47 #define PP_SelfCTL 0x0114 /* Self Command Register */ 48 #define PP_BusCTL 0x0116 /* ISA bus control Register */ 49 #define PP_TestCTL 0x0118 /* Test Register */ 50 #define PP_AutoNegCTL 0x011C /* Auto Negotiation Ctrl */ 51 52 #define PP_ISQ 0x0120 /* Interrupt Status */ 53 #define PP_RxEvent 0x0124 /* Rx Event Register */ 54 #define PP_TxEvent 0x0128 /* Tx Event Register */ 55 #define PP_BufEvent 0x012C /* Bus Event Register */ 56 #define PP_RxMiss 0x0130 /* Receive Miss Count */ 57 #define PP_TxCol 0x0132 /* Transmit Collision Count */ 58 #define PP_LineST 0x0134 /* Line State Register */ 59 #define PP_SelfST 0x0136 /* Self State register */ 60 #define PP_BusST 0x0138 /* Bus Status */ 61 #define PP_TDR 0x013C /* Time Domain Reflectometry */ 62 #define PP_AutoNegST 0x013E /* Auto Neg Status */ 63 #define PP_TxCommand 0x0144 /* Tx Command */ 64 #define PP_TxLength 0x0146 /* Tx Length */ 65 #define PP_LAF 0x0150 /* Hash Table */ 66 #define PP_IA 0x0158 /* Physical Address Register */ 67 68 #define PP_RxStatus 0x0400 /* Receive start of frame */ 69 #define PP_RxLength 0x0402 /* Receive Length of frame */ 70 #define PP_RxFrame 0x0404 /* Receive frame pointer */ 71 #define PP_TxFrame 0x0A00 /* Transmit frame pointer */ 72 73 /* Primary I/O Base Address. If no I/O base is supplied by the user, then this */ 74 /* can be used as the default I/O base to access the PacketPage Area. */ 75 #define DEFAULTIOBASE 0x0300 76 #define FIRST_IO 0x020C /* First I/O port to check */ 77 #define LAST_IO 0x037C /* Last I/O port to check (+10h) */ 78 #define ADD_MASK 0x3000 /* Mask it use of the ADD_PORT register */ 79 #define ADD_SIG 0x3000 /* Expected ID signature */ 80 81 /* On Macs, we only need use the ISA I/O stuff until we do MEMORY_ON */ 82 #ifdef CONFIG_MAC 83 #define LCSLOTBASE 0xfee00000 84 #define MMIOBASE 0x40000 85 #endif 86 87 #define CHIP_EISA_ID_SIG 0x630E /* Product ID Code for Crystal Chip (CS8900 spec 4.3) */ 88 #define CHIP_EISA_ID_SIG_STR "0x630E" 89 90 #ifdef IBMEIPKT 91 #define EISA_ID_SIG 0x4D24 /* IBM */ 92 #define PART_NO_SIG 0x1010 /* IBM */ 93 #define MONGOOSE_BIT 0x0000 /* IBM */ 94 #else 95 #define EISA_ID_SIG 0x630E /* PnP Vendor ID (same as chip id for Crystal board) */ 96 #define PART_NO_SIG 0x4000 /* ID code CS8920 board (PnP Vendor Product code) */ 97 #define MONGOOSE_BIT 0x2000 /* PART_NO_SIG + MONGOOSE_BUT => ID of mongoose */ 98 #endif 99 100 #define PRODUCT_ID_ADD 0x0002 /* Address of product ID */ 101 102 /* Mask to find out the types of registers */ 103 #define REG_TYPE_MASK 0x001F 104 105 /* Eeprom Commands */ 106 #define ERSE_WR_ENBL 0x00F0 107 #define ERSE_WR_DISABLE 0x0000 108 109 /* Defines Control/Config register quintuplet numbers */ 110 #define RX_BUF_CFG 0x0003 111 #define RX_CONTROL 0x0005 112 #define TX_CFG 0x0007 113 #define TX_COMMAND 0x0009 114 #define BUF_CFG 0x000B 115 #define LINE_CONTROL 0x0013 116 #define SELF_CONTROL 0x0015 117 #define BUS_CONTROL 0x0017 118 #define TEST_CONTROL 0x0019 119 120 /* Defines Status/Count registers quintuplet numbers */ 121 #define RX_EVENT 0x0004 122 #define TX_EVENT 0x0008 123 #define BUF_EVENT 0x000C 124 #define RX_MISS_COUNT 0x0010 125 #define TX_COL_COUNT 0x0012 126 #define LINE_STATUS 0x0014 127 #define SELF_STATUS 0x0016 128 #define BUS_STATUS 0x0018 129 #define TDR 0x001C 130 131 /* PP_RxCFG - Receive Configuration and Interrupt Mask bit definition - Read/write */ 132 #define SKIP_1 0x0040 133 #define RX_STREAM_ENBL 0x0080 134 #define RX_OK_ENBL 0x0100 135 #define RX_DMA_ONLY 0x0200 136 #define AUTO_RX_DMA 0x0400 137 #define BUFFER_CRC 0x0800 138 #define RX_CRC_ERROR_ENBL 0x1000 139 #define RX_RUNT_ENBL 0x2000 140 #define RX_EXTRA_DATA_ENBL 0x4000 141 142 /* PP_RxCTL - Receive Control bit definition - Read/write */ 143 #define RX_IA_HASH_ACCEPT 0x0040 144 #define RX_PROM_ACCEPT 0x0080 145 #define RX_OK_ACCEPT 0x0100 146 #define RX_MULTCAST_ACCEPT 0x0200 147 #define RX_IA_ACCEPT 0x0400 148 #define RX_BROADCAST_ACCEPT 0x0800 149 #define RX_BAD_CRC_ACCEPT 0x1000 150 #define RX_RUNT_ACCEPT 0x2000 151 #define RX_EXTRA_DATA_ACCEPT 0x4000 152 #define RX_ALL_ACCEPT (RX_PROM_ACCEPT|RX_BAD_CRC_ACCEPT|RX_RUNT_ACCEPT|RX_EXTRA_DATA_ACCEPT) 153 /* Default receive mode - individually addressed, broadcast, and error free */ 154 #define DEF_RX_ACCEPT (RX_IA_ACCEPT | RX_BROADCAST_ACCEPT | RX_OK_ACCEPT) 155 156 /* PP_TxCFG - Transmit Configuration Interrupt Mask bit definition - Read/write */ 157 #define TX_LOST_CRS_ENBL 0x0040 158 #define TX_SQE_ERROR_ENBL 0x0080 159 #define TX_OK_ENBL 0x0100 160 #define TX_LATE_COL_ENBL 0x0200 161 #define TX_JBR_ENBL 0x0400 162 #define TX_ANY_COL_ENBL 0x0800 163 #define TX_16_COL_ENBL 0x8000 164 165 /* PP_TxCMD - Transmit Command bit definition - Read-only */ 166 #define TX_START_4_BYTES 0x0000 167 #define TX_START_64_BYTES 0x0040 168 #define TX_START_128_BYTES 0x0080 169 #define TX_START_ALL_BYTES 0x00C0 170 #define TX_FORCE 0x0100 171 #define TX_ONE_COL 0x0200 172 #define TX_TWO_PART_DEFF_DISABLE 0x0400 173 #define TX_NO_CRC 0x1000 174 #define TX_RUNT 0x2000 175 176 /* PP_BufCFG - Buffer Configuration Interrupt Mask bit definition - Read/write */ 177 #define GENERATE_SW_INTERRUPT 0x0040 178 #define RX_DMA_ENBL 0x0080 179 #define READY_FOR_TX_ENBL 0x0100 180 #define TX_UNDERRUN_ENBL 0x0200 181 #define RX_MISS_ENBL 0x0400 182 #define RX_128_BYTE_ENBL 0x0800 183 #define TX_COL_COUNT_OVRFLOW_ENBL 0x1000 184 #define RX_MISS_COUNT_OVRFLOW_ENBL 0x2000 185 #define RX_DEST_MATCH_ENBL 0x8000 186 187 /* PP_LineCTL - Line Control bit definition - Read/write */ 188 #define SERIAL_RX_ON 0x0040 189 #define SERIAL_TX_ON 0x0080 190 #define AUI_ONLY 0x0100 191 #define AUTO_AUI_10BASET 0x0200 192 #define MODIFIED_BACKOFF 0x0800 193 #define NO_AUTO_POLARITY 0x1000 194 #define TWO_PART_DEFDIS 0x2000 195 #define LOW_RX_SQUELCH 0x4000 196 197 /* PP_SelfCTL - Software Self Control bit definition - Read/write */ 198 #define POWER_ON_RESET 0x0040 199 #define SW_STOP 0x0100 200 #define SLEEP_ON 0x0200 201 #define AUTO_WAKEUP 0x0400 202 #define HCB0_ENBL 0x1000 203 #define HCB1_ENBL 0x2000 204 #define HCB0 0x4000 205 #define HCB1 0x8000 206 207 /* PP_BusCTL - ISA Bus Control bit definition - Read/write */ 208 #define RESET_RX_DMA 0x0040 209 #define MEMORY_ON 0x0400 210 #define DMA_BURST_MODE 0x0800 211 #define IO_CHANNEL_READY_ON 0x1000 212 #define RX_DMA_SIZE_64K 0x2000 213 #define ENABLE_IRQ 0x8000 214 215 /* PP_TestCTL - Test Control bit definition - Read/write */ 216 #define LINK_OFF 0x0080 217 #define ENDEC_LOOPBACK 0x0200 218 #define AUI_LOOPBACK 0x0400 219 #define BACKOFF_OFF 0x0800 220 #define FDX_8900 0x4000 221 #define FAST_TEST 0x8000 222 223 /* PP_RxEvent - Receive Event Bit definition - Read-only */ 224 #define RX_IA_HASHED 0x0040 225 #define RX_DRIBBLE 0x0080 226 #define RX_OK 0x0100 227 #define RX_HASHED 0x0200 228 #define RX_IA 0x0400 229 #define RX_BROADCAST 0x0800 230 #define RX_CRC_ERROR 0x1000 231 #define RX_RUNT 0x2000 232 #define RX_EXTRA_DATA 0x4000 233 234 #define HASH_INDEX_MASK 0x0FC00 235 236 /* PP_TxEvent - Transmit Event Bit definition - Read-only */ 237 #define TX_LOST_CRS 0x0040 238 #define TX_SQE_ERROR 0x0080 239 #define TX_OK 0x0100 240 #define TX_LATE_COL 0x0200 241 #define TX_JBR 0x0400 242 #define TX_16_COL 0x8000 243 #define TX_SEND_OK_BITS (TX_OK|TX_LOST_CRS) 244 #define TX_COL_COUNT_MASK 0x7800 245 246 /* PP_BufEvent - Buffer Event Bit definition - Read-only */ 247 #define SW_INTERRUPT 0x0040 248 #define RX_DMA 0x0080 249 #define READY_FOR_TX 0x0100 250 #define TX_UNDERRUN 0x0200 251 #define RX_MISS 0x0400 252 #define RX_128_BYTE 0x0800 253 #define TX_COL_OVRFLW 0x1000 254 #define RX_MISS_OVRFLW 0x2000 255 #define RX_DEST_MATCH 0x8000 256 257 /* PP_LineST - Ethernet Line Status bit definition - Read-only */ 258 #define LINK_OK 0x0080 259 #define AUI_ON 0x0100 260 #define TENBASET_ON 0x0200 261 #define POLARITY_OK 0x1000 262 #define CRS_OK 0x4000 263 264 /* PP_SelfST - Chip Software Status bit definition */ 265 #define ACTIVE_33V 0x0040 266 #define INIT_DONE 0x0080 267 #define SI_BUSY 0x0100 268 #define EEPROM_PRESENT 0x0200 269 #define EEPROM_OK 0x0400 270 #define EL_PRESENT 0x0800 271 #define EE_SIZE_64 0x1000 272 273 /* PP_BusST - ISA Bus Status bit definition */ 274 #define TX_BID_ERROR 0x0080 275 #define READY_FOR_TX_NOW 0x0100 276 277 /* PP_AutoNegCTL - Auto Negotiation Control bit definition */ 278 #define RE_NEG_NOW 0x0040 279 #define ALLOW_FDX 0x0080 280 #define AUTO_NEG_ENABLE 0x0100 281 #define NLP_ENABLE 0x0200 282 #define FORCE_FDX 0x8000 283 #define AUTO_NEG_BITS (FORCE_FDX|NLP_ENABLE|AUTO_NEG_ENABLE) 284 #define AUTO_NEG_MASK (FORCE_FDX|NLP_ENABLE|AUTO_NEG_ENABLE|ALLOW_FDX|RE_NEG_NOW) 285 286 /* PP_AutoNegST - Auto Negotiation Status bit definition */ 287 #define AUTO_NEG_BUSY 0x0080 288 #define FLP_LINK 0x0100 289 #define FLP_LINK_GOOD 0x0800 290 #define LINK_FAULT 0x1000 291 #define HDX_ACTIVE 0x4000 292 #define FDX_ACTIVE 0x8000 293 294 /* The following block defines the ISQ event types */ 295 #define ISQ_RECEIVER_EVENT 0x04 296 #define ISQ_TRANSMITTER_EVENT 0x08 297 #define ISQ_BUFFER_EVENT 0x0c 298 #define ISQ_RX_MISS_EVENT 0x10 299 #define ISQ_TX_COL_EVENT 0x12 300 301 #define ISQ_EVENT_MASK 0x003F /* ISQ mask to find out type of event */ 302 #define ISQ_HIST 16 /* small history buffer */ 303 #define AUTOINCREMENT 0x8000 /* Bit mask to set bit-15 for autoincrement */ 304 305 #define TXRXBUFSIZE 0x0600 306 #define RXDMABUFSIZE 0x8000 307 #define RXDMASIZE 0x4000 308 #define TXRX_LENGTH_MASK 0x07FF 309 310 /* rx options bits */ 311 #define RCV_WITH_RXON 1 /* Set SerRx ON */ 312 #define RCV_COUNTS 2 /* Use Framecnt1 */ 313 #define RCV_PONG 4 /* Pong respondent */ 314 #define RCV_DONG 8 /* Dong operation */ 315 #define RCV_POLLING 0x10 /* Poll RxEvent */ 316 #define RCV_ISQ 0x20 /* Use ISQ, int */ 317 #define RCV_AUTO_DMA 0x100 /* Set AutoRxDMAE */ 318 #define RCV_DMA 0x200 /* Set RxDMA only */ 319 #define RCV_DMA_ALL 0x400 /* Copy all DMA'ed */ 320 #define RCV_FIXED_DATA 0x800 /* Every frame same */ 321 #define RCV_IO 0x1000 /* Use ISA IO only */ 322 #define RCV_MEMORY 0x2000 /* Use ISA Memory */ 323 324 #define RAM_SIZE 0x1000 /* The card has 4k bytes or RAM */ 325 #define PKT_START PP_TxFrame /* Start of packet RAM */ 326 327 #define RX_FRAME_PORT 0x0000 328 #define TX_FRAME_PORT RX_FRAME_PORT 329 #define TX_CMD_PORT 0x0004 330 #define TX_NOW 0x0000 /* Tx packet after 5 bytes copied */ 331 #define TX_AFTER_381 0x0040 /* Tx packet after 381 bytes copied */ 332 #define TX_AFTER_ALL 0x00c0 /* Tx packet after all bytes copied */ 333 #define TX_LEN_PORT 0x0006 334 #define ISQ_PORT 0x0008 335 #define ADD_PORT 0x000A 336 #define DATA_PORT 0x000C 337 338 #define EEPROM_WRITE_EN 0x00F0 339 #define EEPROM_WRITE_DIS 0x0000 340 #define EEPROM_WRITE_CMD 0x0100 341 #define EEPROM_READ_CMD 0x0200 342 343 /* Receive Header */ 344 /* Description of header of each packet in receive area of memory */ 345 #define RBUF_EVENT_LOW 0 /* Low byte of RxEvent - status of received frame */ 346 #define RBUF_EVENT_HIGH 1 /* High byte of RxEvent - status of received frame */ 347 #define RBUF_LEN_LOW 2 /* Length of received data - low byte */ 348 #define RBUF_LEN_HI 3 /* Length of received data - high byte */ 349 #define RBUF_HEAD_LEN 4 /* Length of this header */ 350 351 #define CHIP_READ 0x1 /* Used to mark state of the repins code (chip or dma) */ 352 #define DMA_READ 0x2 /* Used to mark state of the repins code (chip or dma) */ 353 354 /* for bios scan */ 355 /* */ 356 #ifdef CSDEBUG 357 /* use these values for debugging bios scan */ 358 #define BIOS_START_SEG 0x00000 359 #define BIOS_OFFSET_INC 0x0010 360 #else 361 #define BIOS_START_SEG 0x0c000 362 #define BIOS_OFFSET_INC 0x0200 363 #endif 364 365 #define BIOS_LAST_OFFSET 0x0fc00 366 367 /* Byte offsets into the EEPROM configuration buffer */ 368 #define ISA_CNF_OFFSET 0x6 369 #define TX_CTL_OFFSET (ISA_CNF_OFFSET + 8) /* 8900 eeprom */ 370 #define AUTO_NEG_CNF_OFFSET (ISA_CNF_OFFSET + 8) /* 8920 eeprom */ 371 372 /* the assumption here is that the bits in the eeprom are generally */ 373 /* in the same position as those in the autonegctl register. */ 374 /* Of course the IMM bit is not in that register so it must be */ 375 /* masked out */ 376 #define EE_FORCE_FDX 0x8000 377 #define EE_NLP_ENABLE 0x0200 378 #define EE_AUTO_NEG_ENABLE 0x0100 379 #define EE_ALLOW_FDX 0x0080 380 #define EE_AUTO_NEG_CNF_MASK (EE_FORCE_FDX|EE_NLP_ENABLE|EE_AUTO_NEG_ENABLE|EE_ALLOW_FDX) 381 382 #define IMM_BIT 0x0040 /* ignore missing media */ 383 384 #define ADAPTER_CNF_OFFSET (AUTO_NEG_CNF_OFFSET + 2) 385 #define A_CNF_10B_T 0x0001 386 #define A_CNF_AUI 0x0002 387 #define A_CNF_10B_2 0x0004 388 #define A_CNF_MEDIA_TYPE 0x0070 389 #define A_CNF_MEDIA_AUTO 0x0070 390 #define A_CNF_MEDIA_10B_T 0x0020 391 #define A_CNF_MEDIA_AUI 0x0040 392 #define A_CNF_MEDIA_10B_2 0x0010 393 #define A_CNF_DC_DC_POLARITY 0x0080 394 #define A_CNF_NO_AUTO_POLARITY 0x2000 395 #define A_CNF_LOW_RX_SQUELCH 0x4000 396 #define A_CNF_EXTND_10B_2 0x8000 397 398 #define PACKET_PAGE_OFFSET 0x8 399 400 /* Bit definitions for the ISA configuration word from the EEPROM */ 401 #define INT_NO_MASK 0x000F 402 #define DMA_NO_MASK 0x0070 403 #define ISA_DMA_SIZE 0x0200 404 #define ISA_AUTO_RxDMA 0x0400 405 #define ISA_RxDMA 0x0800 406 #define DMA_BURST 0x1000 407 #define STREAM_TRANSFER 0x2000 408 #define ANY_ISA_DMA (ISA_AUTO_RxDMA | ISA_RxDMA) 409 410 /* DMA controller registers */ 411 #define DMA_BASE 0x00 /* DMA controller base */ 412 #define DMA_BASE_2 0x0C0 /* DMA controller base */ 413 414 #define DMA_STAT 0x0D0 /* DMA controller status register */ 415 #define DMA_MASK 0x0D4 /* DMA controller mask register */ 416 #define DMA_MODE 0x0D6 /* DMA controller mode register */ 417 #define DMA_RESETFF 0x0D8 /* DMA controller first/last flip flop */ 418 419 /* DMA data */ 420 #define DMA_DISABLE 0x04 /* Disable channel n */ 421 #define DMA_ENABLE 0x00 /* Enable channel n */ 422 /* Demand transfers, incr. address, auto init, writes, ch. n */ 423 #define DMA_RX_MODE 0x14 424 /* Demand transfers, incr. address, auto init, reads, ch. n */ 425 #define DMA_TX_MODE 0x18 426 427 #define DMA_SIZE (16*1024) /* Size of dma buffer - 16k */ 428 429 #define CS8900 0x0000 430 #define CS8920 0x4000 431 #define CS8920M 0x6000 432 #define REVISON_BITS 0x1F00 433 #define EEVER_NUMBER 0x12 434 #define CHKSUM_LEN 0x14 435 #define CHKSUM_VAL 0x0000 436 #define START_EEPROM_DATA 0x001c /* Offset into eeprom for start of data */ 437 #define IRQ_MAP_EEPROM_DATA 0x0046 /* Offset into eeprom for the IRQ map */ 438 #define IRQ_MAP_LEN 0x0004 /* No of bytes to read for the IRQ map */ 439 #define PNP_IRQ_FRMT 0x0022 /* PNP small item IRQ format */ 440 #define CS8900_IRQ_MAP 0x1c20 /* This IRQ map is fixed */ 441 442 #define CS8920_NO_INTS 0x0F /* Max CS8920 interrupt select # */ 443 444 #define PNP_ADD_PORT 0x0279 445 #define PNP_WRITE_PORT 0x0A79 446 447 #define GET_PNP_ISA_STRUCT 0x40 448 #define PNP_ISA_STRUCT_LEN 0x06 449 #define PNP_CSN_CNT_OFF 0x01 450 #define PNP_RD_PORT_OFF 0x02 451 #define PNP_FUNCTION_OK 0x00 452 #define PNP_WAKE 0x03 453 #define PNP_RSRC_DATA 0x04 454 #define PNP_RSRC_READY 0x01 455 #define PNP_STATUS 0x05 456 #define PNP_ACTIVATE 0x30 457 #define PNP_CNF_IO_H 0x60 458 #define PNP_CNF_IO_L 0x61 459 #define PNP_CNF_INT 0x70 460 #define PNP_CNF_DMA 0x74 461 #define PNP_CNF_MEM 0x48 462