1 /*
2  * This file is part of the Chelsio T4 PCI-E SR-IOV Virtual Function Ethernet
3  * driver for Linux.
4  *
5  * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved.
6  *
7  * This software is available to you under a choice of one of two
8  * licenses.  You may choose to be licensed under the terms of the GNU
9  * General Public License (GPL) Version 2, available from the file
10  * COPYING in the main directory of this source tree, or the
11  * OpenIB.org BSD license below:
12  *
13  *     Redistribution and use in source and binary forms, with or
14  *     without modification, are permitted provided that the following
15  *     conditions are met:
16  *
17  *      - Redistributions of source code must retain the above
18  *        copyright notice, this list of conditions and the following
19  *        disclaimer.
20  *
21  *      - Redistributions in binary form must reproduce the above
22  *        copyright notice, this list of conditions and the following
23  *        disclaimer in the documentation and/or other materials
24  *        provided with the distribution.
25  *
26  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
27  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
28  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
29  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
30  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
31  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
32  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
33  * SOFTWARE.
34  */
35 
36 /*
37  * This file should not be included directly.  Include t4vf_common.h instead.
38  */
39 
40 #ifndef __CXGB4VF_ADAPTER_H__
41 #define __CXGB4VF_ADAPTER_H__
42 
43 #include <linux/interrupt.h>
44 #include <linux/pci.h>
45 #include <linux/spinlock.h>
46 #include <linux/skbuff.h>
47 #include <linux/if_ether.h>
48 #include <linux/netdevice.h>
49 
50 #include "../cxgb4/t4_hw.h"
51 
52 /*
53  * Constants of the implementation.
54  */
55 enum {
56 	MAX_NPORTS	= 1,		/* max # of "ports" */
57 	MAX_PORT_QSETS	= 8,		/* max # of Queue Sets / "port" */
58 	MAX_ETH_QSETS	= MAX_NPORTS*MAX_PORT_QSETS,
59 
60 	/*
61 	 * MSI-X interrupt index usage.
62 	 */
63 	MSIX_FW		= 0,		/* MSI-X index for firmware Q */
64 	MSIX_IQFLINT	= 1,		/* MSI-X index base for Ingress Qs */
65 	MSIX_EXTRAS	= 1,
66 	MSIX_ENTRIES	= MAX_ETH_QSETS + MSIX_EXTRAS,
67 
68 	/*
69 	 * The maximum number of Ingress and Egress Queues is determined by
70 	 * the maximum number of "Queue Sets" which we support plus any
71 	 * ancillary queues.  Each "Queue Set" requires one Ingress Queue
72 	 * for RX Packet Ingress Event notifications and two Egress Queues for
73 	 * a Free List and an Ethernet TX list.
74 	 */
75 	INGQ_EXTRAS	= 2,		/* firmware event queue and */
76 					/*   forwarded interrupts */
77 	MAX_INGQ	= MAX_ETH_QSETS+INGQ_EXTRAS,
78 	MAX_EGRQ	= MAX_ETH_QSETS*2,
79 };
80 
81 /*
82  * Forward structure definition references.
83  */
84 struct adapter;
85 struct sge_eth_rxq;
86 struct sge_rspq;
87 
88 /*
89  * Per-"port" information.  This is really per-Virtual Interface information
90  * but the use of the "port" nomanclature makes it easier to go back and forth
91  * between the PF and VF drivers ...
92  */
93 struct port_info {
94 	struct adapter *adapter;	/* our adapter */
95 	u32 vlan_id;			/* vlan id for VST */
96 	u16 viid;			/* virtual interface ID */
97 	int xact_addr_filt;		/* index of our MAC address filter */
98 	u16 rss_size;			/* size of VI's RSS table slice */
99 	u8 pidx;			/* index into adapter port[] */
100 	s8 mdio_addr;
101 	u8 port_type;			/* firmware port type */
102 	u8 mod_type;			/* firmware module type */
103 	u8 port_id;			/* physical port ID */
104 	u8 nqsets;			/* # of "Queue Sets" */
105 	u8 first_qset;			/* index of first "Queue Set" */
106 	struct link_config link_cfg;	/* physical port configuration */
107 };
108 
109 /*
110  * Scatter Gather Engine resources for the "adapter".  Our ingress and egress
111  * queues are organized into "Queue Sets" with one ingress and one egress
112  * queue per Queue Set.  These Queue Sets are aportionable between the "ports"
113  * (Virtual Interfaces).  One extra ingress queue is used to receive
114  * asynchronous messages from the firmware.  Note that the "Queue IDs" that we
115  * use here are really "Relative Queue IDs" which are returned as part of the
116  * firmware command to allocate queues.  These queue IDs are relative to the
117  * absolute Queue ID base of the section of the Queue ID space allocated to
118  * the PF/VF.
119  */
120 
121 /*
122  * SGE free-list queue state.
123  */
124 struct rx_sw_desc;
125 struct sge_fl {
126 	unsigned int avail;		/* # of available RX buffers */
127 	unsigned int pend_cred;		/* new buffers since last FL DB ring */
128 	unsigned int cidx;		/* consumer index */
129 	unsigned int pidx;		/* producer index */
130 	unsigned long alloc_failed;	/* # of buffer allocation failures */
131 	unsigned long large_alloc_failed;
132 	unsigned long starving;		/* # of times FL was found starving */
133 
134 	/*
135 	 * Write-once/infrequently fields.
136 	 * -------------------------------
137 	 */
138 
139 	unsigned int cntxt_id;		/* SGE relative QID for the free list */
140 	unsigned int abs_id;		/* SGE absolute QID for the free list */
141 	unsigned int size;		/* capacity of free list */
142 	struct rx_sw_desc *sdesc;	/* address of SW RX descriptor ring */
143 	__be64 *desc;			/* address of HW RX descriptor ring */
144 	dma_addr_t addr;		/* PCI bus address of hardware ring */
145 	void __iomem *bar2_addr;	/* address of BAR2 Queue registers */
146 	unsigned int bar2_qid;		/* Queue ID for BAR2 Queue registers */
147 };
148 
149 /*
150  * An ingress packet gather list.
151  */
152 struct pkt_gl {
153 	struct page_frag frags[MAX_SKB_FRAGS];
154 	void *va;			/* virtual address of first byte */
155 	unsigned int nfrags;		/* # of fragments */
156 	unsigned int tot_len;		/* total length of fragments */
157 };
158 
159 typedef int (*rspq_handler_t)(struct sge_rspq *, const __be64 *,
160 			      const struct pkt_gl *);
161 
162 /*
163  * State for an SGE Response Queue.
164  */
165 struct sge_rspq {
166 	struct napi_struct napi;	/* NAPI scheduling control */
167 	const __be64 *cur_desc;		/* current descriptor in queue */
168 	unsigned int cidx;		/* consumer index */
169 	u8 gen;				/* current generation bit */
170 	u8 next_intr_params;		/* holdoff params for next interrupt */
171 	int offset;			/* offset into current FL buffer */
172 
173 	unsigned int unhandled_irqs;	/* bogus interrupts */
174 
175 	/*
176 	 * Write-once/infrequently fields.
177 	 * -------------------------------
178 	 */
179 
180 	u8 intr_params;			/* interrupt holdoff parameters */
181 	u8 pktcnt_idx;			/* interrupt packet threshold */
182 	u8 idx;				/* queue index within its group */
183 	u16 cntxt_id;			/* SGE rel QID for the response Q */
184 	u16 abs_id;			/* SGE abs QID for the response Q */
185 	__be64 *desc;			/* address of hardware response ring */
186 	dma_addr_t phys_addr;		/* PCI bus address of ring */
187 	void __iomem *bar2_addr;	/* address of BAR2 Queue registers */
188 	unsigned int bar2_qid;		/* Queue ID for BAR2 Queue registers */
189 	unsigned int iqe_len;		/* entry size */
190 	unsigned int size;		/* capcity of response Q */
191 	struct adapter *adapter;	/* our adapter */
192 	struct net_device *netdev;	/* associated net device */
193 	rspq_handler_t handler;		/* the handler for this response Q */
194 };
195 
196 /*
197  * Ethernet queue statistics
198  */
199 struct sge_eth_stats {
200 	unsigned long pkts;		/* # of ethernet packets */
201 	unsigned long lro_pkts;		/* # of LRO super packets */
202 	unsigned long lro_merged;	/* # of wire packets merged by LRO */
203 	unsigned long rx_cso;		/* # of Rx checksum offloads */
204 	unsigned long vlan_ex;		/* # of Rx VLAN extractions */
205 	unsigned long rx_drops;		/* # of packets dropped due to no mem */
206 };
207 
208 /*
209  * State for an Ethernet Receive Queue.
210  */
211 struct sge_eth_rxq {
212 	struct sge_rspq rspq;		/* Response Queue */
213 	struct sge_fl fl;		/* Free List */
214 	struct sge_eth_stats stats;	/* receive statistics */
215 };
216 
217 /*
218  * SGE Transmit Queue state.  This contains all of the resources associated
219  * with the hardware status of a TX Queue which is a circular ring of hardware
220  * TX Descriptors.  For convenience, it also contains a pointer to a parallel
221  * "Software Descriptor" array but we don't know anything about it here other
222  * than its type name.
223  */
224 struct tx_desc {
225 	/*
226 	 * Egress Queues are measured in units of SGE_EQ_IDXSIZE by the
227 	 * hardware: Sizes, Producer and Consumer indices, etc.
228 	 */
229 	__be64 flit[SGE_EQ_IDXSIZE/sizeof(__be64)];
230 };
231 struct tx_sw_desc;
232 struct sge_txq {
233 	unsigned int in_use;		/* # of in-use TX descriptors */
234 	unsigned int size;		/* # of descriptors */
235 	unsigned int cidx;		/* SW consumer index */
236 	unsigned int pidx;		/* producer index */
237 	unsigned long stops;		/* # of times queue has been stopped */
238 	unsigned long restarts;		/* # of queue restarts */
239 
240 	/*
241 	 * Write-once/infrequently fields.
242 	 * -------------------------------
243 	 */
244 
245 	unsigned int cntxt_id;		/* SGE relative QID for the TX Q */
246 	unsigned int abs_id;		/* SGE absolute QID for the TX Q */
247 	struct tx_desc *desc;		/* address of HW TX descriptor ring */
248 	struct tx_sw_desc *sdesc;	/* address of SW TX descriptor ring */
249 	struct sge_qstat *stat;		/* queue status entry */
250 	dma_addr_t phys_addr;		/* PCI bus address of hardware ring */
251 	void __iomem *bar2_addr;	/* address of BAR2 Queue registers */
252 	unsigned int bar2_qid;		/* Queue ID for BAR2 Queue registers */
253 };
254 
255 /*
256  * State for an Ethernet Transmit Queue.
257  */
258 struct sge_eth_txq {
259 	struct sge_txq q;		/* SGE TX Queue */
260 	struct netdev_queue *txq;	/* associated netdev TX queue */
261 	unsigned long tso;		/* # of TSO requests */
262 	unsigned long tx_cso;		/* # of TX checksum offloads */
263 	unsigned long vlan_ins;		/* # of TX VLAN insertions */
264 	unsigned long mapping_err;	/* # of I/O MMU packet mapping errors */
265 };
266 
267 /*
268  * The complete set of Scatter/Gather Engine resources.
269  */
270 struct sge {
271 	/*
272 	 * Our "Queue Sets" ...
273 	 */
274 	struct sge_eth_txq ethtxq[MAX_ETH_QSETS];
275 	struct sge_eth_rxq ethrxq[MAX_ETH_QSETS];
276 
277 	/*
278 	 * Extra ingress queues for asynchronous firmware events and
279 	 * forwarded interrupts (when in MSI mode).
280 	 */
281 	struct sge_rspq fw_evtq ____cacheline_aligned_in_smp;
282 
283 	struct sge_rspq intrq ____cacheline_aligned_in_smp;
284 	spinlock_t intrq_lock;
285 
286 	/*
287 	 * State for managing "starving Free Lists" -- Free Lists which have
288 	 * fallen below a certain threshold of buffers available to the
289 	 * hardware and attempts to refill them up to that threshold have
290 	 * failed.  We have a regular "slow tick" timer process which will
291 	 * make periodic attempts to refill these starving Free Lists ...
292 	 */
293 	DECLARE_BITMAP(starving_fl, MAX_EGRQ);
294 	struct timer_list rx_timer;
295 
296 	/*
297 	 * State for cleaning up completed TX descriptors.
298 	 */
299 	struct timer_list tx_timer;
300 
301 	/*
302 	 * Write-once/infrequently fields.
303 	 * -------------------------------
304 	 */
305 
306 	u16 max_ethqsets;		/* # of available Ethernet queue sets */
307 	u16 ethqsets;			/* # of active Ethernet queue sets */
308 	u16 ethtxq_rover;		/* Tx queue to clean up next */
309 	u16 timer_val[SGE_NTIMERS];	/* interrupt holdoff timer array */
310 	u8 counter_val[SGE_NCOUNTERS];	/* interrupt RX threshold array */
311 
312 	/* Decoded Adapter Parameters.
313 	 */
314 	u32 fl_pg_order;		/* large page allocation size */
315 	u32 stat_len;			/* length of status page at ring end */
316 	u32 pktshift;			/* padding between CPL & packet data */
317 	u32 fl_align;			/* response queue message alignment */
318 	u32 fl_starve_thres;		/* Free List starvation threshold */
319 
320 	/*
321 	 * Reverse maps from Absolute Queue IDs to associated queue pointers.
322 	 * The absolute Queue IDs are in a compact range which start at a
323 	 * [potentially large] Base Queue ID.  We perform the reverse map by
324 	 * first converting the Absolute Queue ID into a Relative Queue ID by
325 	 * subtracting off the Base Queue ID and then use a Relative Queue ID
326 	 * indexed table to get the pointer to the corresponding software
327 	 * queue structure.
328 	 */
329 	unsigned int egr_base;
330 	unsigned int ingr_base;
331 	void *egr_map[MAX_EGRQ];
332 	struct sge_rspq *ingr_map[MAX_INGQ];
333 };
334 
335 /*
336  * Utility macros to convert Absolute- to Relative-Queue indices and Egress-
337  * and Ingress-Queues.  The EQ_MAP() and IQ_MAP() macros which provide
338  * pointers to Ingress- and Egress-Queues can be used as both L- and R-values
339  */
340 #define EQ_IDX(s, abs_id) ((unsigned int)((abs_id) - (s)->egr_base))
341 #define IQ_IDX(s, abs_id) ((unsigned int)((abs_id) - (s)->ingr_base))
342 
343 #define EQ_MAP(s, abs_id) ((s)->egr_map[EQ_IDX(s, abs_id)])
344 #define IQ_MAP(s, abs_id) ((s)->ingr_map[IQ_IDX(s, abs_id)])
345 
346 /*
347  * Macro to iterate across Queue Sets ("rxq" is a historic misnomer).
348  */
349 #define for_each_ethrxq(sge, iter) \
350 	for (iter = 0; iter < (sge)->ethqsets; iter++)
351 
352 struct hash_mac_addr {
353 	struct list_head list;
354 	u8 addr[ETH_ALEN];
355 	unsigned int iface_mac;
356 };
357 
358 struct mbox_list {
359 	struct list_head list;
360 };
361 
362 /*
363  * Per-"adapter" (Virtual Function) information.
364  */
365 struct adapter {
366 	/* PCI resources */
367 	void __iomem *regs;
368 	void __iomem *bar2;
369 	struct pci_dev *pdev;
370 	struct device *pdev_dev;
371 
372 	/* "adapter" resources */
373 	unsigned long registered_device_map;
374 	unsigned long open_device_map;
375 	unsigned long flags;
376 	struct adapter_params params;
377 
378 	/* queue and interrupt resources */
379 	struct {
380 		unsigned short vec;
381 		char desc[22];
382 	} msix_info[MSIX_ENTRIES];
383 	struct sge sge;
384 
385 	/* Linux network device resources */
386 	struct net_device *port[MAX_NPORTS];
387 	const char *name;
388 	unsigned int msg_enable;
389 
390 	/* debugfs resources */
391 	struct dentry *debugfs_root;
392 
393 	/* various locks */
394 	spinlock_t stats_lock;
395 
396 	/* lock for mailbox cmd list */
397 	spinlock_t mbox_lock;
398 	struct mbox_list mlist;
399 
400 	/* support for mailbox command/reply logging */
401 #define T4VF_OS_LOG_MBOX_CMDS 256
402 	struct mbox_cmd_log *mbox_log;
403 
404 	/* list of MAC addresses in MPS Hash */
405 	struct list_head mac_hlist;
406 };
407 
408 enum { /* adapter flags */
409 	CXGB4VF_FULL_INIT_DONE			= (1UL << 0),
410 	CXGB4VF_USING_MSI			= (1UL << 1),
411 	CXGB4VF_USING_MSIX			= (1UL << 2),
412 	CXGB4VF_QUEUES_BOUND			= (1UL << 3),
413 	CXGB4VF_ROOT_NO_RELAXED_ORDERING	= (1UL << 4),
414 	CXGB4VF_FW_OK				= (1UL << 5),
415 };
416 
417 /*
418  * The following register read/write routine definitions are required by
419  * the common code.
420  */
421 
422 /**
423  * t4_read_reg - read a HW register
424  * @adapter: the adapter
425  * @reg_addr: the register address
426  *
427  * Returns the 32-bit value of the given HW register.
428  */
429 static inline u32 t4_read_reg(struct adapter *adapter, u32 reg_addr)
430 {
431 	return readl(adapter->regs + reg_addr);
432 }
433 
434 /**
435  * t4_write_reg - write a HW register
436  * @adapter: the adapter
437  * @reg_addr: the register address
438  * @val: the value to write
439  *
440  * Write a 32-bit value into the given HW register.
441  */
442 static inline void t4_write_reg(struct adapter *adapter, u32 reg_addr, u32 val)
443 {
444 	writel(val, adapter->regs + reg_addr);
445 }
446 
447 #ifndef readq
448 static inline u64 readq(const volatile void __iomem *addr)
449 {
450 	return readl(addr) + ((u64)readl(addr + 4) << 32);
451 }
452 
453 static inline void writeq(u64 val, volatile void __iomem *addr)
454 {
455 	writel(val, addr);
456 	writel(val >> 32, addr + 4);
457 }
458 #endif
459 
460 /**
461  * t4_read_reg64 - read a 64-bit HW register
462  * @adapter: the adapter
463  * @reg_addr: the register address
464  *
465  * Returns the 64-bit value of the given HW register.
466  */
467 static inline u64 t4_read_reg64(struct adapter *adapter, u32 reg_addr)
468 {
469 	return readq(adapter->regs + reg_addr);
470 }
471 
472 /**
473  * t4_write_reg64 - write a 64-bit HW register
474  * @adapter: the adapter
475  * @reg_addr: the register address
476  * @val: the value to write
477  *
478  * Write a 64-bit value into the given HW register.
479  */
480 static inline void t4_write_reg64(struct adapter *adapter, u32 reg_addr,
481 				  u64 val)
482 {
483 	writeq(val, adapter->regs + reg_addr);
484 }
485 
486 /**
487  * port_name - return the string name of a port
488  * @adapter: the adapter
489  * @pidx: the port index
490  *
491  * Return the string name of the selected port.
492  */
493 static inline const char *port_name(struct adapter *adapter, int pidx)
494 {
495 	return adapter->port[pidx]->name;
496 }
497 
498 /**
499  * t4_os_set_hw_addr - store a port's MAC address in SW
500  * @adapter: the adapter
501  * @pidx: the port index
502  * @hw_addr: the Ethernet address
503  *
504  * Store the Ethernet address of the given port in SW.  Called by the common
505  * code when it retrieves a port's Ethernet address from EEPROM.
506  */
507 static inline void t4_os_set_hw_addr(struct adapter *adapter, int pidx,
508 				     u8 hw_addr[])
509 {
510 	memcpy(adapter->port[pidx]->dev_addr, hw_addr, ETH_ALEN);
511 }
512 
513 /**
514  * netdev2pinfo - return the port_info structure associated with a net_device
515  * @dev: the netdev
516  *
517  * Return the struct port_info associated with a net_device
518  */
519 static inline struct port_info *netdev2pinfo(const struct net_device *dev)
520 {
521 	return netdev_priv(dev);
522 }
523 
524 /**
525  * adap2pinfo - return the port_info of a port
526  * @adap: the adapter
527  * @pidx: the port index
528  *
529  * Return the port_info structure for the adapter.
530  */
531 static inline struct port_info *adap2pinfo(struct adapter *adapter, int pidx)
532 {
533 	return netdev_priv(adapter->port[pidx]);
534 }
535 
536 /**
537  * netdev2adap - return the adapter structure associated with a net_device
538  * @dev: the netdev
539  *
540  * Return the struct adapter associated with a net_device
541  */
542 static inline struct adapter *netdev2adap(const struct net_device *dev)
543 {
544 	return netdev2pinfo(dev)->adapter;
545 }
546 
547 /*
548  * OS "Callback" function declarations.  These are functions that the OS code
549  * is "contracted" to provide for the common code.
550  */
551 void t4vf_os_link_changed(struct adapter *, int, int);
552 void t4vf_os_portmod_changed(struct adapter *, int);
553 
554 /*
555  * SGE function prototype declarations.
556  */
557 int t4vf_sge_alloc_rxq(struct adapter *, struct sge_rspq *, bool,
558 		       struct net_device *, int,
559 		       struct sge_fl *, rspq_handler_t);
560 int t4vf_sge_alloc_eth_txq(struct adapter *, struct sge_eth_txq *,
561 			   struct net_device *, struct netdev_queue *,
562 			   unsigned int);
563 void t4vf_free_sge_resources(struct adapter *);
564 
565 int t4vf_eth_xmit(struct sk_buff *, struct net_device *);
566 int t4vf_ethrx_handler(struct sge_rspq *, const __be64 *,
567 		       const struct pkt_gl *);
568 
569 irq_handler_t t4vf_intr_handler(struct adapter *);
570 irqreturn_t t4vf_sge_intr_msix(int, void *);
571 
572 int t4vf_sge_init(struct adapter *);
573 void t4vf_sge_start(struct adapter *);
574 void t4vf_sge_stop(struct adapter *);
575 
576 #endif /* __CXGB4VF_ADAPTER_H__ */
577