1 /* bnx2x.h: QLogic Everest network driver.
2  *
3  * Copyright (c) 2007-2013 Broadcom Corporation
4  * Copyright (c) 2014 QLogic Corporation
5  * All rights reserved
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License as published by
9  * the Free Software Foundation.
10  *
11  * Maintained by: Ariel Elior <ariel.elior@qlogic.com>
12  * Written by: Eliezer Tamir
13  * Based on code from Michael Chan's bnx2 driver
14  */
15 
16 #ifndef BNX2X_H
17 #define BNX2X_H
18 
19 #include <linux/pci.h>
20 #include <linux/netdevice.h>
21 #include <linux/dma-mapping.h>
22 #include <linux/types.h>
23 #include <linux/pci_regs.h>
24 
25 #include <linux/ptp_clock_kernel.h>
26 #include <linux/net_tstamp.h>
27 #include <linux/timecounter.h>
28 
29 /* compilation time flags */
30 
31 /* define this to make the driver freeze on error to allow getting debug info
32  * (you will need to reboot afterwards) */
33 /* #define BNX2X_STOP_ON_ERROR */
34 
35 #define DRV_MODULE_VERSION      "1.712.30-0"
36 #define DRV_MODULE_RELDATE      "2014/02/10"
37 #define BNX2X_BC_VER            0x040200
38 
39 #if defined(CONFIG_DCB)
40 #define BCM_DCBNL
41 #endif
42 
43 #include "bnx2x_hsi.h"
44 
45 #include "../cnic_if.h"
46 
47 #define BNX2X_MIN_MSIX_VEC_CNT(bp)		((bp)->min_msix_vec_cnt)
48 
49 #include <linux/mdio.h>
50 
51 #include "bnx2x_reg.h"
52 #include "bnx2x_fw_defs.h"
53 #include "bnx2x_mfw_req.h"
54 #include "bnx2x_link.h"
55 #include "bnx2x_sp.h"
56 #include "bnx2x_dcb.h"
57 #include "bnx2x_stats.h"
58 #include "bnx2x_vfpf.h"
59 
60 enum bnx2x_int_mode {
61 	BNX2X_INT_MODE_MSIX,
62 	BNX2X_INT_MODE_INTX,
63 	BNX2X_INT_MODE_MSI
64 };
65 
66 /* error/debug prints */
67 
68 #define DRV_MODULE_NAME		"bnx2x"
69 
70 /* for messages that are currently off */
71 #define BNX2X_MSG_OFF			0x0
72 #define BNX2X_MSG_MCP			0x0010000 /* was: NETIF_MSG_HW */
73 #define BNX2X_MSG_STATS			0x0020000 /* was: NETIF_MSG_TIMER */
74 #define BNX2X_MSG_NVM			0x0040000 /* was: NETIF_MSG_HW */
75 #define BNX2X_MSG_DMAE			0x0080000 /* was: NETIF_MSG_HW */
76 #define BNX2X_MSG_SP			0x0100000 /* was: NETIF_MSG_INTR */
77 #define BNX2X_MSG_FP			0x0200000 /* was: NETIF_MSG_INTR */
78 #define BNX2X_MSG_IOV			0x0800000
79 #define BNX2X_MSG_PTP			0x1000000
80 #define BNX2X_MSG_IDLE			0x2000000 /* used for idle check*/
81 #define BNX2X_MSG_ETHTOOL		0x4000000
82 #define BNX2X_MSG_DCB			0x8000000
83 
84 /* regular debug print */
85 #define DP_INNER(fmt, ...)					\
86 	pr_notice("[%s:%d(%s)]" fmt,				\
87 		  __func__, __LINE__,				\
88 		  bp->dev ? (bp->dev->name) : "?",		\
89 		  ##__VA_ARGS__);
90 
91 #define DP(__mask, fmt, ...)					\
92 do {								\
93 	if (unlikely(bp->msg_enable & (__mask)))		\
94 		DP_INNER(fmt, ##__VA_ARGS__);			\
95 } while (0)
96 
97 #define DP_AND(__mask, fmt, ...)				\
98 do {								\
99 	if (unlikely((bp->msg_enable & (__mask)) == __mask))	\
100 		DP_INNER(fmt, ##__VA_ARGS__);			\
101 } while (0)
102 
103 #define DP_CONT(__mask, fmt, ...)				\
104 do {								\
105 	if (unlikely(bp->msg_enable & (__mask)))		\
106 		pr_cont(fmt, ##__VA_ARGS__);			\
107 } while (0)
108 
109 /* errors debug print */
110 #define BNX2X_DBG_ERR(fmt, ...)					\
111 do {								\
112 	if (unlikely(netif_msg_probe(bp)))			\
113 		pr_err("[%s:%d(%s)]" fmt,			\
114 		       __func__, __LINE__,			\
115 		       bp->dev ? (bp->dev->name) : "?",		\
116 		       ##__VA_ARGS__);				\
117 } while (0)
118 
119 /* for errors (never masked) */
120 #define BNX2X_ERR(fmt, ...)					\
121 do {								\
122 	pr_err("[%s:%d(%s)]" fmt,				\
123 	       __func__, __LINE__,				\
124 	       bp->dev ? (bp->dev->name) : "?",			\
125 	       ##__VA_ARGS__);					\
126 } while (0)
127 
128 #define BNX2X_ERROR(fmt, ...)					\
129 	pr_err("[%s:%d]" fmt, __func__, __LINE__, ##__VA_ARGS__)
130 
131 /* before we have a dev->name use dev_info() */
132 #define BNX2X_DEV_INFO(fmt, ...)				 \
133 do {								 \
134 	if (unlikely(netif_msg_probe(bp)))			 \
135 		dev_info(&bp->pdev->dev, fmt, ##__VA_ARGS__);	 \
136 } while (0)
137 
138 /* Error handling */
139 void bnx2x_panic_dump(struct bnx2x *bp, bool disable_int);
140 #ifdef BNX2X_STOP_ON_ERROR
141 #define bnx2x_panic()				\
142 do {						\
143 	bp->panic = 1;				\
144 	BNX2X_ERR("driver assert\n");		\
145 	bnx2x_panic_dump(bp, true);		\
146 } while (0)
147 #else
148 #define bnx2x_panic()				\
149 do {						\
150 	bp->panic = 1;				\
151 	BNX2X_ERR("driver assert\n");		\
152 	bnx2x_panic_dump(bp, false);		\
153 } while (0)
154 #endif
155 
156 #define bnx2x_mc_addr(ha)      ((ha)->addr)
157 #define bnx2x_uc_addr(ha)      ((ha)->addr)
158 
159 #define U64_LO(x)			((u32)(((u64)(x)) & 0xffffffff))
160 #define U64_HI(x)			((u32)(((u64)(x)) >> 32))
161 #define HILO_U64(hi, lo)		((((u64)(hi)) << 32) + (lo))
162 
163 #define REG_ADDR(bp, offset)		((bp->regview) + (offset))
164 
165 #define REG_RD(bp, offset)		readl(REG_ADDR(bp, offset))
166 #define REG_RD8(bp, offset)		readb(REG_ADDR(bp, offset))
167 #define REG_RD16(bp, offset)		readw(REG_ADDR(bp, offset))
168 
169 #define REG_WR(bp, offset, val)		writel((u32)val, REG_ADDR(bp, offset))
170 #define REG_WR8(bp, offset, val)	writeb((u8)val, REG_ADDR(bp, offset))
171 #define REG_WR16(bp, offset, val)	writew((u16)val, REG_ADDR(bp, offset))
172 
173 #define REG_RD_IND(bp, offset)		bnx2x_reg_rd_ind(bp, offset)
174 #define REG_WR_IND(bp, offset, val)	bnx2x_reg_wr_ind(bp, offset, val)
175 
176 #define REG_RD_DMAE(bp, offset, valp, len32) \
177 	do { \
178 		bnx2x_read_dmae(bp, offset, len32);\
179 		memcpy(valp, bnx2x_sp(bp, wb_data[0]), (len32) * 4); \
180 	} while (0)
181 
182 #define REG_WR_DMAE(bp, offset, valp, len32) \
183 	do { \
184 		memcpy(bnx2x_sp(bp, wb_data[0]), valp, (len32) * 4); \
185 		bnx2x_write_dmae(bp, bnx2x_sp_mapping(bp, wb_data), \
186 				 offset, len32); \
187 	} while (0)
188 
189 #define REG_WR_DMAE_LEN(bp, offset, valp, len32) \
190 	REG_WR_DMAE(bp, offset, valp, len32)
191 
192 #define VIRT_WR_DMAE_LEN(bp, data, addr, len32, le32_swap) \
193 	do { \
194 		memcpy(GUNZIP_BUF(bp), data, (len32) * 4); \
195 		bnx2x_write_big_buf_wb(bp, addr, len32); \
196 	} while (0)
197 
198 #define SHMEM_ADDR(bp, field)		(bp->common.shmem_base + \
199 					 offsetof(struct shmem_region, field))
200 #define SHMEM_RD(bp, field)		REG_RD(bp, SHMEM_ADDR(bp, field))
201 #define SHMEM_WR(bp, field, val)	REG_WR(bp, SHMEM_ADDR(bp, field), val)
202 
203 #define SHMEM2_ADDR(bp, field)		(bp->common.shmem2_base + \
204 					 offsetof(struct shmem2_region, field))
205 #define SHMEM2_RD(bp, field)		REG_RD(bp, SHMEM2_ADDR(bp, field))
206 #define SHMEM2_WR(bp, field, val)	REG_WR(bp, SHMEM2_ADDR(bp, field), val)
207 #define MF_CFG_ADDR(bp, field)		(bp->common.mf_cfg_base + \
208 					 offsetof(struct mf_cfg, field))
209 #define MF2_CFG_ADDR(bp, field)		(bp->common.mf2_cfg_base + \
210 					 offsetof(struct mf2_cfg, field))
211 
212 #define MF_CFG_RD(bp, field)		REG_RD(bp, MF_CFG_ADDR(bp, field))
213 #define MF_CFG_WR(bp, field, val)	REG_WR(bp,\
214 					       MF_CFG_ADDR(bp, field), (val))
215 #define MF2_CFG_RD(bp, field)		REG_RD(bp, MF2_CFG_ADDR(bp, field))
216 
217 #define SHMEM2_HAS(bp, field)		((bp)->common.shmem2_base &&	\
218 					 (SHMEM2_RD((bp), size) >	\
219 					 offsetof(struct shmem2_region, field)))
220 
221 #define EMAC_RD(bp, reg)		REG_RD(bp, emac_base + reg)
222 #define EMAC_WR(bp, reg, val)		REG_WR(bp, emac_base + reg, val)
223 
224 /* SP SB indices */
225 
226 /* General SP events - stats query, cfc delete, etc  */
227 #define HC_SP_INDEX_ETH_DEF_CONS		3
228 
229 /* EQ completions */
230 #define HC_SP_INDEX_EQ_CONS			7
231 
232 /* FCoE L2 connection completions */
233 #define HC_SP_INDEX_ETH_FCOE_TX_CQ_CONS		6
234 #define HC_SP_INDEX_ETH_FCOE_RX_CQ_CONS		4
235 /* iSCSI L2 */
236 #define HC_SP_INDEX_ETH_ISCSI_CQ_CONS		5
237 #define HC_SP_INDEX_ETH_ISCSI_RX_CQ_CONS	1
238 
239 /* Special clients parameters */
240 
241 /* SB indices */
242 /* FCoE L2 */
243 #define BNX2X_FCOE_L2_RX_INDEX \
244 	(&bp->def_status_blk->sp_sb.\
245 	index_values[HC_SP_INDEX_ETH_FCOE_RX_CQ_CONS])
246 
247 #define BNX2X_FCOE_L2_TX_INDEX \
248 	(&bp->def_status_blk->sp_sb.\
249 	index_values[HC_SP_INDEX_ETH_FCOE_TX_CQ_CONS])
250 
251 /**
252  *  CIDs and CLIDs:
253  *  CLIDs below is a CLID for func 0, then the CLID for other
254  *  functions will be calculated by the formula:
255  *
256  *  FUNC_N_CLID_X = N * NUM_SPECIAL_CLIENTS + FUNC_0_CLID_X
257  *
258  */
259 enum {
260 	BNX2X_ISCSI_ETH_CL_ID_IDX,
261 	BNX2X_FCOE_ETH_CL_ID_IDX,
262 	BNX2X_MAX_CNIC_ETH_CL_ID_IDX,
263 };
264 
265 /* use a value high enough to be above all the PFs, which has least significant
266  * nibble as 8, so when cnic needs to come up with a CID for UIO to use to
267  * calculate doorbell address according to old doorbell configuration scheme
268  * (db_msg_sz 1 << 7 * cid + 0x40 DPM offset) it can come up with a valid number
269  * We must avoid coming up with cid 8 for iscsi since according to this method
270  * the designated UIO cid will come out 0 and it has a special handling for that
271  * case which doesn't suit us. Therefore will will cieling to closes cid which
272  * has least signigifcant nibble 8 and if it is 8 we will move forward to 0x18.
273  */
274 
275 #define BNX2X_1st_NON_L2_ETH_CID(bp)	(BNX2X_NUM_NON_CNIC_QUEUES(bp) * \
276 					 (bp)->max_cos)
277 /* amount of cids traversed by UIO's DPM addition to doorbell */
278 #define UIO_DPM				8
279 /* roundup to DPM offset */
280 #define UIO_ROUNDUP(bp)			(roundup(BNX2X_1st_NON_L2_ETH_CID(bp), \
281 					 UIO_DPM))
282 /* offset to nearest value which has lsb nibble matching DPM */
283 #define UIO_CID_OFFSET(bp)		((UIO_ROUNDUP(bp) + UIO_DPM) % \
284 					 (UIO_DPM * 2))
285 /* add offset to rounded-up cid to get a value which could be used with UIO */
286 #define UIO_DPM_ALIGN(bp)		(UIO_ROUNDUP(bp) + UIO_CID_OFFSET(bp))
287 /* but wait - avoid UIO special case for cid 0 */
288 #define UIO_DPM_CID0_OFFSET(bp)		((UIO_DPM * 2) * \
289 					 (UIO_DPM_ALIGN(bp) == UIO_DPM))
290 /* Properly DPM aligned CID dajusted to cid 0 secal case */
291 #define BNX2X_CNIC_START_ETH_CID(bp)	(UIO_DPM_ALIGN(bp) + \
292 					 (UIO_DPM_CID0_OFFSET(bp)))
293 /* how many cids were wasted  - need this value for cid allocation */
294 #define UIO_CID_PAD(bp)			(BNX2X_CNIC_START_ETH_CID(bp) - \
295 					 BNX2X_1st_NON_L2_ETH_CID(bp))
296 	/* iSCSI L2 */
297 #define	BNX2X_ISCSI_ETH_CID(bp)		(BNX2X_CNIC_START_ETH_CID(bp))
298 	/* FCoE L2 */
299 #define	BNX2X_FCOE_ETH_CID(bp)		(BNX2X_CNIC_START_ETH_CID(bp) + 1)
300 
301 #define CNIC_SUPPORT(bp)		((bp)->cnic_support)
302 #define CNIC_ENABLED(bp)		((bp)->cnic_enabled)
303 #define CNIC_LOADED(bp)			((bp)->cnic_loaded)
304 #define FCOE_INIT(bp)			((bp)->fcoe_init)
305 
306 #define AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR \
307 	AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR
308 
309 #define SM_RX_ID			0
310 #define SM_TX_ID			1
311 
312 /* defines for multiple tx priority indices */
313 #define FIRST_TX_ONLY_COS_INDEX		1
314 #define FIRST_TX_COS_INDEX		0
315 
316 /* rules for calculating the cids of tx-only connections */
317 #define CID_TO_FP(cid, bp)		((cid) % BNX2X_NUM_NON_CNIC_QUEUES(bp))
318 #define CID_COS_TO_TX_ONLY_CID(cid, cos, bp) \
319 				(cid + cos * BNX2X_NUM_NON_CNIC_QUEUES(bp))
320 
321 /* fp index inside class of service range */
322 #define FP_COS_TO_TXQ(fp, cos, bp) \
323 			((fp)->index + cos * BNX2X_NUM_NON_CNIC_QUEUES(bp))
324 
325 /* Indexes for transmission queues array:
326  * txdata for RSS i CoS j is at location i + (j * num of RSS)
327  * txdata for FCoE (if exist) is at location max cos * num of RSS
328  * txdata for FWD (if exist) is one location after FCoE
329  * txdata for OOO (if exist) is one location after FWD
330  */
331 enum {
332 	FCOE_TXQ_IDX_OFFSET,
333 	FWD_TXQ_IDX_OFFSET,
334 	OOO_TXQ_IDX_OFFSET,
335 };
336 #define MAX_ETH_TXQ_IDX(bp)	(BNX2X_NUM_NON_CNIC_QUEUES(bp) * (bp)->max_cos)
337 #define FCOE_TXQ_IDX(bp)	(MAX_ETH_TXQ_IDX(bp) + FCOE_TXQ_IDX_OFFSET)
338 
339 /* fast path */
340 /*
341  * This driver uses new build_skb() API :
342  * RX ring buffer contains pointer to kmalloc() data only,
343  * skb are built only after Hardware filled the frame.
344  */
345 struct sw_rx_bd {
346 	u8		*data;
347 	DEFINE_DMA_UNMAP_ADDR(mapping);
348 };
349 
350 struct sw_tx_bd {
351 	struct sk_buff	*skb;
352 	u16		first_bd;
353 	u8		flags;
354 /* Set on the first BD descriptor when there is a split BD */
355 #define BNX2X_TSO_SPLIT_BD		(1<<0)
356 #define BNX2X_HAS_SECOND_PBD		(1<<1)
357 };
358 
359 struct sw_rx_page {
360 	struct page	*page;
361 	DEFINE_DMA_UNMAP_ADDR(mapping);
362 	unsigned int	offset;
363 };
364 
365 union db_prod {
366 	struct doorbell_set_prod data;
367 	u32		raw;
368 };
369 
370 /* dropless fc FW/HW related params */
371 #define BRB_SIZE(bp)		(CHIP_IS_E3(bp) ? 1024 : 512)
372 #define MAX_AGG_QS(bp)		(CHIP_IS_E1(bp) ? \
373 					ETH_MAX_AGGREGATION_QUEUES_E1 :\
374 					ETH_MAX_AGGREGATION_QUEUES_E1H_E2)
375 #define FW_DROP_LEVEL(bp)	(3 + MAX_SPQ_PENDING + MAX_AGG_QS(bp))
376 #define FW_PREFETCH_CNT		16
377 #define DROPLESS_FC_HEADROOM	100
378 
379 /* MC hsi */
380 #define BCM_PAGE_SHIFT		12
381 #define BCM_PAGE_SIZE		(1 << BCM_PAGE_SHIFT)
382 #define BCM_PAGE_MASK		(~(BCM_PAGE_SIZE - 1))
383 #define BCM_PAGE_ALIGN(addr)	(((addr) + BCM_PAGE_SIZE - 1) & BCM_PAGE_MASK)
384 
385 #define PAGES_PER_SGE_SHIFT	0
386 #define PAGES_PER_SGE		(1 << PAGES_PER_SGE_SHIFT)
387 #define SGE_PAGE_SHIFT		12
388 #define SGE_PAGE_SIZE		(1 << SGE_PAGE_SHIFT)
389 #define SGE_PAGE_MASK		(~(SGE_PAGE_SIZE - 1))
390 #define SGE_PAGE_ALIGN(addr)	(((addr) + SGE_PAGE_SIZE - 1) & SGE_PAGE_MASK)
391 #define SGE_PAGES		(SGE_PAGE_SIZE * PAGES_PER_SGE)
392 #define TPA_AGG_SIZE		min_t(u32, (min_t(u32, 8, MAX_SKB_FRAGS) * \
393 					    SGE_PAGES), 0xffff)
394 
395 /* SGE ring related macros */
396 #define NUM_RX_SGE_PAGES	2
397 #define RX_SGE_CNT		(BCM_PAGE_SIZE / sizeof(struct eth_rx_sge))
398 #define NEXT_PAGE_SGE_DESC_CNT	2
399 #define MAX_RX_SGE_CNT		(RX_SGE_CNT - NEXT_PAGE_SGE_DESC_CNT)
400 /* RX_SGE_CNT is promised to be a power of 2 */
401 #define RX_SGE_MASK		(RX_SGE_CNT - 1)
402 #define NUM_RX_SGE		(RX_SGE_CNT * NUM_RX_SGE_PAGES)
403 #define MAX_RX_SGE		(NUM_RX_SGE - 1)
404 #define NEXT_SGE_IDX(x)		((((x) & RX_SGE_MASK) == \
405 				  (MAX_RX_SGE_CNT - 1)) ? \
406 					(x) + 1 + NEXT_PAGE_SGE_DESC_CNT : \
407 					(x) + 1)
408 #define RX_SGE(x)		((x) & MAX_RX_SGE)
409 
410 /*
411  * Number of required  SGEs is the sum of two:
412  * 1. Number of possible opened aggregations (next packet for
413  *    these aggregations will probably consume SGE immediately)
414  * 2. Rest of BRB blocks divided by 2 (block will consume new SGE only
415  *    after placement on BD for new TPA aggregation)
416  *
417  * Takes into account NEXT_PAGE_SGE_DESC_CNT "next" elements on each page
418  */
419 #define NUM_SGE_REQ		(MAX_AGG_QS(bp) + \
420 					(BRB_SIZE(bp) - MAX_AGG_QS(bp)) / 2)
421 #define NUM_SGE_PG_REQ		((NUM_SGE_REQ + MAX_RX_SGE_CNT - 1) / \
422 						MAX_RX_SGE_CNT)
423 #define SGE_TH_LO(bp)		(NUM_SGE_REQ + \
424 				 NUM_SGE_PG_REQ * NEXT_PAGE_SGE_DESC_CNT)
425 #define SGE_TH_HI(bp)		(SGE_TH_LO(bp) + DROPLESS_FC_HEADROOM)
426 
427 /* Manipulate a bit vector defined as an array of u64 */
428 
429 /* Number of bits in one sge_mask array element */
430 #define BIT_VEC64_ELEM_SZ		64
431 #define BIT_VEC64_ELEM_SHIFT		6
432 #define BIT_VEC64_ELEM_MASK		((u64)BIT_VEC64_ELEM_SZ - 1)
433 
434 #define __BIT_VEC64_SET_BIT(el, bit) \
435 	do { \
436 		el = ((el) | ((u64)0x1 << (bit))); \
437 	} while (0)
438 
439 #define __BIT_VEC64_CLEAR_BIT(el, bit) \
440 	do { \
441 		el = ((el) & (~((u64)0x1 << (bit)))); \
442 	} while (0)
443 
444 #define BIT_VEC64_SET_BIT(vec64, idx) \
445 	__BIT_VEC64_SET_BIT((vec64)[(idx) >> BIT_VEC64_ELEM_SHIFT], \
446 			   (idx) & BIT_VEC64_ELEM_MASK)
447 
448 #define BIT_VEC64_CLEAR_BIT(vec64, idx) \
449 	__BIT_VEC64_CLEAR_BIT((vec64)[(idx) >> BIT_VEC64_ELEM_SHIFT], \
450 			     (idx) & BIT_VEC64_ELEM_MASK)
451 
452 #define BIT_VEC64_TEST_BIT(vec64, idx) \
453 	(((vec64)[(idx) >> BIT_VEC64_ELEM_SHIFT] >> \
454 	((idx) & BIT_VEC64_ELEM_MASK)) & 0x1)
455 
456 /* Creates a bitmask of all ones in less significant bits.
457    idx - index of the most significant bit in the created mask */
458 #define BIT_VEC64_ONES_MASK(idx) \
459 		(((u64)0x1 << (((idx) & BIT_VEC64_ELEM_MASK) + 1)) - 1)
460 #define BIT_VEC64_ELEM_ONE_MASK	((u64)(~0))
461 
462 /*******************************************************/
463 
464 /* Number of u64 elements in SGE mask array */
465 #define RX_SGE_MASK_LEN			(NUM_RX_SGE / BIT_VEC64_ELEM_SZ)
466 #define RX_SGE_MASK_LEN_MASK		(RX_SGE_MASK_LEN - 1)
467 #define NEXT_SGE_MASK_ELEM(el)		(((el) + 1) & RX_SGE_MASK_LEN_MASK)
468 
469 union host_hc_status_block {
470 	/* pointer to fp status block e1x */
471 	struct host_hc_status_block_e1x *e1x_sb;
472 	/* pointer to fp status block e2 */
473 	struct host_hc_status_block_e2  *e2_sb;
474 };
475 
476 struct bnx2x_agg_info {
477 	/*
478 	 * First aggregation buffer is a data buffer, the following - are pages.
479 	 * We will preallocate the data buffer for each aggregation when
480 	 * we open the interface and will replace the BD at the consumer
481 	 * with this one when we receive the TPA_START CQE in order to
482 	 * keep the Rx BD ring consistent.
483 	 */
484 	struct sw_rx_bd		first_buf;
485 	u8			tpa_state;
486 #define BNX2X_TPA_START			1
487 #define BNX2X_TPA_STOP			2
488 #define BNX2X_TPA_ERROR			3
489 	u8			placement_offset;
490 	u16			parsing_flags;
491 	u16			vlan_tag;
492 	u16			len_on_bd;
493 	u32			rxhash;
494 	enum pkt_hash_types	rxhash_type;
495 	u16			gro_size;
496 	u16			full_page;
497 };
498 
499 #define Q_STATS_OFFSET32(stat_name) \
500 			(offsetof(struct bnx2x_eth_q_stats, stat_name) / 4)
501 
502 struct bnx2x_fp_txdata {
503 
504 	struct sw_tx_bd		*tx_buf_ring;
505 
506 	union eth_tx_bd_types	*tx_desc_ring;
507 	dma_addr_t		tx_desc_mapping;
508 
509 	u32			cid;
510 
511 	union db_prod		tx_db;
512 
513 	u16			tx_pkt_prod;
514 	u16			tx_pkt_cons;
515 	u16			tx_bd_prod;
516 	u16			tx_bd_cons;
517 
518 	unsigned long		tx_pkt;
519 
520 	__le16			*tx_cons_sb;
521 
522 	int			txq_index;
523 	struct bnx2x_fastpath	*parent_fp;
524 	int			tx_ring_size;
525 };
526 
527 enum bnx2x_tpa_mode_t {
528 	TPA_MODE_DISABLED,
529 	TPA_MODE_LRO,
530 	TPA_MODE_GRO
531 };
532 
533 struct bnx2x_alloc_pool {
534 	struct page	*page;
535 	unsigned int	offset;
536 };
537 
538 struct bnx2x_fastpath {
539 	struct bnx2x		*bp; /* parent */
540 
541 	struct napi_struct	napi;
542 
543 #ifdef CONFIG_NET_RX_BUSY_POLL
544 	unsigned long		busy_poll_state;
545 #endif
546 
547 	union host_hc_status_block	status_blk;
548 	/* chip independent shortcuts into sb structure */
549 	__le16			*sb_index_values;
550 	__le16			*sb_running_index;
551 	/* chip independent shortcut into rx_prods_offset memory */
552 	u32			ustorm_rx_prods_offset;
553 
554 	u32			rx_buf_size;
555 	u32			rx_frag_size; /* 0 if kmalloced(), or rx_buf_size + NET_SKB_PAD */
556 	dma_addr_t		status_blk_mapping;
557 
558 	enum bnx2x_tpa_mode_t	mode;
559 
560 	u8			max_cos; /* actual number of active tx coses */
561 	struct bnx2x_fp_txdata	*txdata_ptr[BNX2X_MULTI_TX_COS];
562 
563 	struct sw_rx_bd		*rx_buf_ring;	/* BDs mappings ring */
564 	struct sw_rx_page	*rx_page_ring;	/* SGE pages mappings ring */
565 
566 	struct eth_rx_bd	*rx_desc_ring;
567 	dma_addr_t		rx_desc_mapping;
568 
569 	union eth_rx_cqe	*rx_comp_ring;
570 	dma_addr_t		rx_comp_mapping;
571 
572 	/* SGE ring */
573 	struct eth_rx_sge	*rx_sge_ring;
574 	dma_addr_t		rx_sge_mapping;
575 
576 	u64			sge_mask[RX_SGE_MASK_LEN];
577 
578 	u32			cid;
579 
580 	__le16			fp_hc_idx;
581 
582 	u8			index;		/* number in fp array */
583 	u8			rx_queue;	/* index for skb_record */
584 	u8			cl_id;		/* eth client id */
585 	u8			cl_qzone_id;
586 	u8			fw_sb_id;	/* status block number in FW */
587 	u8			igu_sb_id;	/* status block number in HW */
588 
589 	u16			rx_bd_prod;
590 	u16			rx_bd_cons;
591 	u16			rx_comp_prod;
592 	u16			rx_comp_cons;
593 	u16			rx_sge_prod;
594 	/* The last maximal completed SGE */
595 	u16			last_max_sge;
596 	__le16			*rx_cons_sb;
597 	unsigned long		rx_pkt,
598 				rx_calls;
599 
600 	/* TPA related */
601 	struct bnx2x_agg_info	*tpa_info;
602 #ifdef BNX2X_STOP_ON_ERROR
603 	u64			tpa_queue_used;
604 #endif
605 	/* The size is calculated using the following:
606 	     sizeof name field from netdev structure +
607 	     4 ('-Xx-' string) +
608 	     4 (for the digits and to make it DWORD aligned) */
609 #define FP_NAME_SIZE		(sizeof(((struct net_device *)0)->name) + 8)
610 	char			name[FP_NAME_SIZE];
611 
612 	struct bnx2x_alloc_pool	page_pool;
613 };
614 
615 #define bnx2x_fp(bp, nr, var)	((bp)->fp[(nr)].var)
616 #define bnx2x_sp_obj(bp, fp)	((bp)->sp_objs[(fp)->index])
617 #define bnx2x_fp_stats(bp, fp)	(&((bp)->fp_stats[(fp)->index]))
618 #define bnx2x_fp_qstats(bp, fp)	(&((bp)->fp_stats[(fp)->index].eth_q_stats))
619 
620 #ifdef CONFIG_NET_RX_BUSY_POLL
621 
622 enum bnx2x_fp_state {
623 	BNX2X_STATE_FP_NAPI	= BIT(0), /* NAPI handler owns the queue */
624 
625 	BNX2X_STATE_FP_NAPI_REQ_BIT = 1, /* NAPI would like to own the queue */
626 	BNX2X_STATE_FP_NAPI_REQ = BIT(1),
627 
628 	BNX2X_STATE_FP_POLL_BIT = 2,
629 	BNX2X_STATE_FP_POLL     = BIT(2), /* busy_poll owns the queue */
630 
631 	BNX2X_STATE_FP_DISABLE_BIT = 3, /* queue is dismantled */
632 };
633 
634 static inline void bnx2x_fp_busy_poll_init(struct bnx2x_fastpath *fp)
635 {
636 	WRITE_ONCE(fp->busy_poll_state, 0);
637 }
638 
639 /* called from the device poll routine to get ownership of a FP */
640 static inline bool bnx2x_fp_lock_napi(struct bnx2x_fastpath *fp)
641 {
642 	unsigned long prev, old = READ_ONCE(fp->busy_poll_state);
643 
644 	while (1) {
645 		switch (old) {
646 		case BNX2X_STATE_FP_POLL:
647 			/* make sure bnx2x_fp_lock_poll() wont starve us */
648 			set_bit(BNX2X_STATE_FP_NAPI_REQ_BIT,
649 				&fp->busy_poll_state);
650 			/* fallthrough */
651 		case BNX2X_STATE_FP_POLL | BNX2X_STATE_FP_NAPI_REQ:
652 			return false;
653 		default:
654 			break;
655 		}
656 		prev = cmpxchg(&fp->busy_poll_state, old, BNX2X_STATE_FP_NAPI);
657 		if (unlikely(prev != old)) {
658 			old = prev;
659 			continue;
660 		}
661 		return true;
662 	}
663 }
664 
665 static inline void bnx2x_fp_unlock_napi(struct bnx2x_fastpath *fp)
666 {
667 	smp_wmb();
668 	fp->busy_poll_state = 0;
669 }
670 
671 /* called from bnx2x_low_latency_poll() */
672 static inline bool bnx2x_fp_lock_poll(struct bnx2x_fastpath *fp)
673 {
674 	return cmpxchg(&fp->busy_poll_state, 0, BNX2X_STATE_FP_POLL) == 0;
675 }
676 
677 static inline void bnx2x_fp_unlock_poll(struct bnx2x_fastpath *fp)
678 {
679 	smp_mb__before_atomic();
680 	clear_bit(BNX2X_STATE_FP_POLL_BIT, &fp->busy_poll_state);
681 }
682 
683 /* true if a socket is polling */
684 static inline bool bnx2x_fp_ll_polling(struct bnx2x_fastpath *fp)
685 {
686 	return READ_ONCE(fp->busy_poll_state) & BNX2X_STATE_FP_POLL;
687 }
688 
689 /* false if fp is currently owned */
690 static inline bool bnx2x_fp_ll_disable(struct bnx2x_fastpath *fp)
691 {
692 	set_bit(BNX2X_STATE_FP_DISABLE_BIT, &fp->busy_poll_state);
693 	return !bnx2x_fp_ll_polling(fp);
694 
695 }
696 #else
697 static inline void bnx2x_fp_busy_poll_init(struct bnx2x_fastpath *fp)
698 {
699 }
700 
701 static inline bool bnx2x_fp_lock_napi(struct bnx2x_fastpath *fp)
702 {
703 	return true;
704 }
705 
706 static inline void bnx2x_fp_unlock_napi(struct bnx2x_fastpath *fp)
707 {
708 }
709 
710 static inline bool bnx2x_fp_lock_poll(struct bnx2x_fastpath *fp)
711 {
712 	return false;
713 }
714 
715 static inline void bnx2x_fp_unlock_poll(struct bnx2x_fastpath *fp)
716 {
717 }
718 
719 static inline bool bnx2x_fp_ll_polling(struct bnx2x_fastpath *fp)
720 {
721 	return false;
722 }
723 static inline bool bnx2x_fp_ll_disable(struct bnx2x_fastpath *fp)
724 {
725 	return true;
726 }
727 #endif /* CONFIG_NET_RX_BUSY_POLL */
728 
729 /* Use 2500 as a mini-jumbo MTU for FCoE */
730 #define BNX2X_FCOE_MINI_JUMBO_MTU	2500
731 
732 #define	FCOE_IDX_OFFSET		0
733 
734 #define FCOE_IDX(bp)		(BNX2X_NUM_NON_CNIC_QUEUES(bp) + \
735 				 FCOE_IDX_OFFSET)
736 #define bnx2x_fcoe_fp(bp)	(&bp->fp[FCOE_IDX(bp)])
737 #define bnx2x_fcoe(bp, var)	(bnx2x_fcoe_fp(bp)->var)
738 #define bnx2x_fcoe_inner_sp_obj(bp)	(&bp->sp_objs[FCOE_IDX(bp)])
739 #define bnx2x_fcoe_sp_obj(bp, var)	(bnx2x_fcoe_inner_sp_obj(bp)->var)
740 #define bnx2x_fcoe_tx(bp, var)	(bnx2x_fcoe_fp(bp)-> \
741 						txdata_ptr[FIRST_TX_COS_INDEX] \
742 						->var)
743 
744 #define IS_ETH_FP(fp)		((fp)->index < BNX2X_NUM_ETH_QUEUES((fp)->bp))
745 #define IS_FCOE_FP(fp)		((fp)->index == FCOE_IDX((fp)->bp))
746 #define IS_FCOE_IDX(idx)	((idx) == FCOE_IDX(bp))
747 
748 /* MC hsi */
749 #define MAX_FETCH_BD		13	/* HW max BDs per packet */
750 #define RX_COPY_THRESH		92
751 
752 #define NUM_TX_RINGS		16
753 #define TX_DESC_CNT		(BCM_PAGE_SIZE / sizeof(union eth_tx_bd_types))
754 #define NEXT_PAGE_TX_DESC_CNT	1
755 #define MAX_TX_DESC_CNT		(TX_DESC_CNT - NEXT_PAGE_TX_DESC_CNT)
756 #define NUM_TX_BD		(TX_DESC_CNT * NUM_TX_RINGS)
757 #define MAX_TX_BD		(NUM_TX_BD - 1)
758 #define MAX_TX_AVAIL		(MAX_TX_DESC_CNT * NUM_TX_RINGS - 2)
759 #define NEXT_TX_IDX(x)		((((x) & MAX_TX_DESC_CNT) == \
760 				  (MAX_TX_DESC_CNT - 1)) ? \
761 					(x) + 1 + NEXT_PAGE_TX_DESC_CNT : \
762 					(x) + 1)
763 #define TX_BD(x)		((x) & MAX_TX_BD)
764 #define TX_BD_POFF(x)		((x) & MAX_TX_DESC_CNT)
765 
766 /* number of NEXT_PAGE descriptors may be required during placement */
767 #define NEXT_CNT_PER_TX_PKT(bds)	\
768 				(((bds) + MAX_TX_DESC_CNT - 1) / \
769 				 MAX_TX_DESC_CNT * NEXT_PAGE_TX_DESC_CNT)
770 /* max BDs per tx packet w/o next_pages:
771  * START_BD		- describes packed
772  * START_BD(splitted)	- includes unpaged data segment for GSO
773  * PARSING_BD		- for TSO and CSUM data
774  * PARSING_BD2		- for encapsulation data
775  * Frag BDs		- describes pages for frags
776  */
777 #define BDS_PER_TX_PKT		4
778 #define MAX_BDS_PER_TX_PKT	(MAX_SKB_FRAGS + BDS_PER_TX_PKT)
779 /* max BDs per tx packet including next pages */
780 #define MAX_DESC_PER_TX_PKT	(MAX_BDS_PER_TX_PKT + \
781 				 NEXT_CNT_PER_TX_PKT(MAX_BDS_PER_TX_PKT))
782 
783 /* The RX BD ring is special, each bd is 8 bytes but the last one is 16 */
784 #define NUM_RX_RINGS		8
785 #define RX_DESC_CNT		(BCM_PAGE_SIZE / sizeof(struct eth_rx_bd))
786 #define NEXT_PAGE_RX_DESC_CNT	2
787 #define MAX_RX_DESC_CNT		(RX_DESC_CNT - NEXT_PAGE_RX_DESC_CNT)
788 #define RX_DESC_MASK		(RX_DESC_CNT - 1)
789 #define NUM_RX_BD		(RX_DESC_CNT * NUM_RX_RINGS)
790 #define MAX_RX_BD		(NUM_RX_BD - 1)
791 #define MAX_RX_AVAIL		(MAX_RX_DESC_CNT * NUM_RX_RINGS - 2)
792 
793 /* dropless fc calculations for BDs
794  *
795  * Number of BDs should as number of buffers in BRB:
796  * Low threshold takes into account NEXT_PAGE_RX_DESC_CNT
797  * "next" elements on each page
798  */
799 #define NUM_BD_REQ		BRB_SIZE(bp)
800 #define NUM_BD_PG_REQ		((NUM_BD_REQ + MAX_RX_DESC_CNT - 1) / \
801 					      MAX_RX_DESC_CNT)
802 #define BD_TH_LO(bp)		(NUM_BD_REQ + \
803 				 NUM_BD_PG_REQ * NEXT_PAGE_RX_DESC_CNT + \
804 				 FW_DROP_LEVEL(bp))
805 #define BD_TH_HI(bp)		(BD_TH_LO(bp) + DROPLESS_FC_HEADROOM)
806 
807 #define MIN_RX_AVAIL		((bp)->dropless_fc ? BD_TH_HI(bp) + 128 : 128)
808 
809 #define MIN_RX_SIZE_TPA_HW	(CHIP_IS_E1(bp) ? \
810 					ETH_MIN_RX_CQES_WITH_TPA_E1 : \
811 					ETH_MIN_RX_CQES_WITH_TPA_E1H_E2)
812 #define MIN_RX_SIZE_NONTPA_HW   ETH_MIN_RX_CQES_WITHOUT_TPA
813 #define MIN_RX_SIZE_TPA		(max_t(u32, MIN_RX_SIZE_TPA_HW, MIN_RX_AVAIL))
814 #define MIN_RX_SIZE_NONTPA	(max_t(u32, MIN_RX_SIZE_NONTPA_HW,\
815 								MIN_RX_AVAIL))
816 
817 #define NEXT_RX_IDX(x)		((((x) & RX_DESC_MASK) == \
818 				  (MAX_RX_DESC_CNT - 1)) ? \
819 					(x) + 1 + NEXT_PAGE_RX_DESC_CNT : \
820 					(x) + 1)
821 #define RX_BD(x)		((x) & MAX_RX_BD)
822 
823 /*
824  * As long as CQE is X times bigger than BD entry we have to allocate X times
825  * more pages for CQ ring in order to keep it balanced with BD ring
826  */
827 #define CQE_BD_REL	(sizeof(union eth_rx_cqe) / sizeof(struct eth_rx_bd))
828 #define NUM_RCQ_RINGS		(NUM_RX_RINGS * CQE_BD_REL)
829 #define RCQ_DESC_CNT		(BCM_PAGE_SIZE / sizeof(union eth_rx_cqe))
830 #define NEXT_PAGE_RCQ_DESC_CNT	1
831 #define MAX_RCQ_DESC_CNT	(RCQ_DESC_CNT - NEXT_PAGE_RCQ_DESC_CNT)
832 #define NUM_RCQ_BD		(RCQ_DESC_CNT * NUM_RCQ_RINGS)
833 #define MAX_RCQ_BD		(NUM_RCQ_BD - 1)
834 #define MAX_RCQ_AVAIL		(MAX_RCQ_DESC_CNT * NUM_RCQ_RINGS - 2)
835 #define NEXT_RCQ_IDX(x)		((((x) & MAX_RCQ_DESC_CNT) == \
836 				  (MAX_RCQ_DESC_CNT - 1)) ? \
837 					(x) + 1 + NEXT_PAGE_RCQ_DESC_CNT : \
838 					(x) + 1)
839 #define RCQ_BD(x)		((x) & MAX_RCQ_BD)
840 
841 /* dropless fc calculations for RCQs
842  *
843  * Number of RCQs should be as number of buffers in BRB:
844  * Low threshold takes into account NEXT_PAGE_RCQ_DESC_CNT
845  * "next" elements on each page
846  */
847 #define NUM_RCQ_REQ		BRB_SIZE(bp)
848 #define NUM_RCQ_PG_REQ		((NUM_BD_REQ + MAX_RCQ_DESC_CNT - 1) / \
849 					      MAX_RCQ_DESC_CNT)
850 #define RCQ_TH_LO(bp)		(NUM_RCQ_REQ + \
851 				 NUM_RCQ_PG_REQ * NEXT_PAGE_RCQ_DESC_CNT + \
852 				 FW_DROP_LEVEL(bp))
853 #define RCQ_TH_HI(bp)		(RCQ_TH_LO(bp) + DROPLESS_FC_HEADROOM)
854 
855 /* This is needed for determining of last_max */
856 #define SUB_S16(a, b)		(s16)((s16)(a) - (s16)(b))
857 #define SUB_S32(a, b)		(s32)((s32)(a) - (s32)(b))
858 
859 #define BNX2X_SWCID_SHIFT	17
860 #define BNX2X_SWCID_MASK	((0x1 << BNX2X_SWCID_SHIFT) - 1)
861 
862 /* used on a CID received from the HW */
863 #define SW_CID(x)			(le32_to_cpu(x) & BNX2X_SWCID_MASK)
864 #define CQE_CMD(x)			(le32_to_cpu(x) >> \
865 					COMMON_RAMROD_ETH_RX_CQE_CMD_ID_SHIFT)
866 
867 #define BD_UNMAP_ADDR(bd)		HILO_U64(le32_to_cpu((bd)->addr_hi), \
868 						 le32_to_cpu((bd)->addr_lo))
869 #define BD_UNMAP_LEN(bd)		(le16_to_cpu((bd)->nbytes))
870 
871 #define BNX2X_DB_MIN_SHIFT		3	/* 8 bytes */
872 #define BNX2X_DB_SHIFT			3	/* 8 bytes*/
873 #if (BNX2X_DB_SHIFT < BNX2X_DB_MIN_SHIFT)
874 #error "Min DB doorbell stride is 8"
875 #endif
876 #define DOORBELL(bp, cid, val) \
877 	do { \
878 		writel((u32)(val), bp->doorbells + (bp->db_size * (cid))); \
879 	} while (0)
880 
881 /* TX CSUM helpers */
882 #define SKB_CS_OFF(skb)		(offsetof(struct tcphdr, check) - \
883 				 skb->csum_offset)
884 #define SKB_CS(skb)		(*(u16 *)(skb_transport_header(skb) + \
885 					  skb->csum_offset))
886 
887 #define pbd_tcp_flags(tcp_hdr)	(ntohl(tcp_flag_word(tcp_hdr))>>16 & 0xff)
888 
889 #define XMIT_PLAIN		0
890 #define XMIT_CSUM_V4		(1 << 0)
891 #define XMIT_CSUM_V6		(1 << 1)
892 #define XMIT_CSUM_TCP		(1 << 2)
893 #define XMIT_GSO_V4		(1 << 3)
894 #define XMIT_GSO_V6		(1 << 4)
895 #define XMIT_CSUM_ENC_V4	(1 << 5)
896 #define XMIT_CSUM_ENC_V6	(1 << 6)
897 #define XMIT_GSO_ENC_V4		(1 << 7)
898 #define XMIT_GSO_ENC_V6		(1 << 8)
899 
900 #define XMIT_CSUM_ENC		(XMIT_CSUM_ENC_V4 | XMIT_CSUM_ENC_V6)
901 #define XMIT_GSO_ENC		(XMIT_GSO_ENC_V4 | XMIT_GSO_ENC_V6)
902 
903 #define XMIT_CSUM		(XMIT_CSUM_V4 | XMIT_CSUM_V6 | XMIT_CSUM_ENC)
904 #define XMIT_GSO		(XMIT_GSO_V4 | XMIT_GSO_V6 | XMIT_GSO_ENC)
905 
906 /* stuff added to make the code fit 80Col */
907 #define CQE_TYPE(cqe_fp_flags)	 ((cqe_fp_flags) & ETH_FAST_PATH_RX_CQE_TYPE)
908 #define CQE_TYPE_START(cqe_type) ((cqe_type) == RX_ETH_CQE_TYPE_ETH_START_AGG)
909 #define CQE_TYPE_STOP(cqe_type)  ((cqe_type) == RX_ETH_CQE_TYPE_ETH_STOP_AGG)
910 #define CQE_TYPE_SLOW(cqe_type)  ((cqe_type) == RX_ETH_CQE_TYPE_ETH_RAMROD)
911 #define CQE_TYPE_FAST(cqe_type)  ((cqe_type) == RX_ETH_CQE_TYPE_ETH_FASTPATH)
912 
913 #define ETH_RX_ERROR_FALGS		ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG
914 
915 #define BNX2X_PRS_FLAG_OVERETH_IPV4(flags) \
916 				(((le16_to_cpu(flags) & \
917 				   PARSING_FLAGS_OVER_ETHERNET_PROTOCOL) >> \
918 				  PARSING_FLAGS_OVER_ETHERNET_PROTOCOL_SHIFT) \
919 				 == PRS_FLAG_OVERETH_IPV4)
920 #define BNX2X_RX_SUM_FIX(cqe) \
921 	BNX2X_PRS_FLAG_OVERETH_IPV4(cqe->fast_path_cqe.pars_flags.flags)
922 
923 #define FP_USB_FUNC_OFF	\
924 			offsetof(struct cstorm_status_block_u, func)
925 #define FP_CSB_FUNC_OFF	\
926 			offsetof(struct cstorm_status_block_c, func)
927 
928 #define HC_INDEX_ETH_RX_CQ_CONS		1
929 
930 #define HC_INDEX_OOO_TX_CQ_CONS		4
931 
932 #define HC_INDEX_ETH_TX_CQ_CONS_COS0	5
933 
934 #define HC_INDEX_ETH_TX_CQ_CONS_COS1	6
935 
936 #define HC_INDEX_ETH_TX_CQ_CONS_COS2	7
937 
938 #define HC_INDEX_ETH_FIRST_TX_CQ_CONS	HC_INDEX_ETH_TX_CQ_CONS_COS0
939 
940 #define BNX2X_RX_SB_INDEX \
941 	(&fp->sb_index_values[HC_INDEX_ETH_RX_CQ_CONS])
942 
943 #define BNX2X_TX_SB_INDEX_BASE BNX2X_TX_SB_INDEX_COS0
944 
945 #define BNX2X_TX_SB_INDEX_COS0 \
946 	(&fp->sb_index_values[HC_INDEX_ETH_TX_CQ_CONS_COS0])
947 
948 /* end of fast path */
949 
950 /* common */
951 
952 struct bnx2x_common {
953 
954 	u32			chip_id;
955 /* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */
956 #define CHIP_ID(bp)			(bp->common.chip_id & 0xfffffff0)
957 
958 #define CHIP_NUM(bp)			(bp->common.chip_id >> 16)
959 #define CHIP_NUM_57710			0x164e
960 #define CHIP_NUM_57711			0x164f
961 #define CHIP_NUM_57711E			0x1650
962 #define CHIP_NUM_57712			0x1662
963 #define CHIP_NUM_57712_MF		0x1663
964 #define CHIP_NUM_57712_VF		0x166f
965 #define CHIP_NUM_57713			0x1651
966 #define CHIP_NUM_57713E			0x1652
967 #define CHIP_NUM_57800			0x168a
968 #define CHIP_NUM_57800_MF		0x16a5
969 #define CHIP_NUM_57800_VF		0x16a9
970 #define CHIP_NUM_57810			0x168e
971 #define CHIP_NUM_57810_MF		0x16ae
972 #define CHIP_NUM_57810_VF		0x16af
973 #define CHIP_NUM_57811			0x163d
974 #define CHIP_NUM_57811_MF		0x163e
975 #define CHIP_NUM_57811_VF		0x163f
976 #define CHIP_NUM_57840_OBSOLETE		0x168d
977 #define CHIP_NUM_57840_MF_OBSOLETE	0x16ab
978 #define CHIP_NUM_57840_4_10		0x16a1
979 #define CHIP_NUM_57840_2_20		0x16a2
980 #define CHIP_NUM_57840_MF		0x16a4
981 #define CHIP_NUM_57840_VF		0x16ad
982 #define CHIP_IS_E1(bp)			(CHIP_NUM(bp) == CHIP_NUM_57710)
983 #define CHIP_IS_57711(bp)		(CHIP_NUM(bp) == CHIP_NUM_57711)
984 #define CHIP_IS_57711E(bp)		(CHIP_NUM(bp) == CHIP_NUM_57711E)
985 #define CHIP_IS_57712(bp)		(CHIP_NUM(bp) == CHIP_NUM_57712)
986 #define CHIP_IS_57712_VF(bp)		(CHIP_NUM(bp) == CHIP_NUM_57712_VF)
987 #define CHIP_IS_57712_MF(bp)		(CHIP_NUM(bp) == CHIP_NUM_57712_MF)
988 #define CHIP_IS_57800(bp)		(CHIP_NUM(bp) == CHIP_NUM_57800)
989 #define CHIP_IS_57800_MF(bp)		(CHIP_NUM(bp) == CHIP_NUM_57800_MF)
990 #define CHIP_IS_57800_VF(bp)		(CHIP_NUM(bp) == CHIP_NUM_57800_VF)
991 #define CHIP_IS_57810(bp)		(CHIP_NUM(bp) == CHIP_NUM_57810)
992 #define CHIP_IS_57810_MF(bp)		(CHIP_NUM(bp) == CHIP_NUM_57810_MF)
993 #define CHIP_IS_57810_VF(bp)		(CHIP_NUM(bp) == CHIP_NUM_57810_VF)
994 #define CHIP_IS_57811(bp)		(CHIP_NUM(bp) == CHIP_NUM_57811)
995 #define CHIP_IS_57811_MF(bp)		(CHIP_NUM(bp) == CHIP_NUM_57811_MF)
996 #define CHIP_IS_57811_VF(bp)		(CHIP_NUM(bp) == CHIP_NUM_57811_VF)
997 #define CHIP_IS_57840(bp)		\
998 		((CHIP_NUM(bp) == CHIP_NUM_57840_4_10) || \
999 		 (CHIP_NUM(bp) == CHIP_NUM_57840_2_20) || \
1000 		 (CHIP_NUM(bp) == CHIP_NUM_57840_OBSOLETE))
1001 #define CHIP_IS_57840_MF(bp)	((CHIP_NUM(bp) == CHIP_NUM_57840_MF) || \
1002 				 (CHIP_NUM(bp) == CHIP_NUM_57840_MF_OBSOLETE))
1003 #define CHIP_IS_57840_VF(bp)		(CHIP_NUM(bp) == CHIP_NUM_57840_VF)
1004 #define CHIP_IS_E1H(bp)			(CHIP_IS_57711(bp) || \
1005 					 CHIP_IS_57711E(bp))
1006 #define CHIP_IS_57811xx(bp)		(CHIP_IS_57811(bp) || \
1007 					 CHIP_IS_57811_MF(bp) || \
1008 					 CHIP_IS_57811_VF(bp))
1009 #define CHIP_IS_E2(bp)			(CHIP_IS_57712(bp) || \
1010 					 CHIP_IS_57712_MF(bp) || \
1011 					 CHIP_IS_57712_VF(bp))
1012 #define CHIP_IS_E3(bp)			(CHIP_IS_57800(bp) || \
1013 					 CHIP_IS_57800_MF(bp) || \
1014 					 CHIP_IS_57800_VF(bp) || \
1015 					 CHIP_IS_57810(bp) || \
1016 					 CHIP_IS_57810_MF(bp) || \
1017 					 CHIP_IS_57810_VF(bp) || \
1018 					 CHIP_IS_57811xx(bp) || \
1019 					 CHIP_IS_57840(bp) || \
1020 					 CHIP_IS_57840_MF(bp) || \
1021 					 CHIP_IS_57840_VF(bp))
1022 #define CHIP_IS_E1x(bp)			(CHIP_IS_E1((bp)) || CHIP_IS_E1H((bp)))
1023 #define USES_WARPCORE(bp)		(CHIP_IS_E3(bp))
1024 #define IS_E1H_OFFSET			(!CHIP_IS_E1(bp))
1025 
1026 #define CHIP_REV_SHIFT			12
1027 #define CHIP_REV_MASK			(0xF << CHIP_REV_SHIFT)
1028 #define CHIP_REV_VAL(bp)		(bp->common.chip_id & CHIP_REV_MASK)
1029 #define CHIP_REV_Ax			(0x0 << CHIP_REV_SHIFT)
1030 #define CHIP_REV_Bx			(0x1 << CHIP_REV_SHIFT)
1031 /* assume maximum 5 revisions */
1032 #define CHIP_REV_IS_SLOW(bp)		(CHIP_REV_VAL(bp) > 0x00005000)
1033 /* Emul versions are A=>0xe, B=>0xc, C=>0xa, D=>8, E=>6 */
1034 #define CHIP_REV_IS_EMUL(bp)		((CHIP_REV_IS_SLOW(bp)) && \
1035 					 !(CHIP_REV_VAL(bp) & 0x00001000))
1036 /* FPGA versions are A=>0xf, B=>0xd, C=>0xb, D=>9, E=>7 */
1037 #define CHIP_REV_IS_FPGA(bp)		((CHIP_REV_IS_SLOW(bp)) && \
1038 					 (CHIP_REV_VAL(bp) & 0x00001000))
1039 
1040 #define CHIP_TIME(bp)			((CHIP_REV_IS_EMUL(bp)) ? 2000 : \
1041 					((CHIP_REV_IS_FPGA(bp)) ? 200 : 1))
1042 
1043 #define CHIP_METAL(bp)			(bp->common.chip_id & 0x00000ff0)
1044 #define CHIP_BOND_ID(bp)		(bp->common.chip_id & 0x0000000f)
1045 #define CHIP_REV_SIM(bp)		(((CHIP_REV_MASK - CHIP_REV_VAL(bp)) >>\
1046 					   (CHIP_REV_SHIFT + 1)) \
1047 						<< CHIP_REV_SHIFT)
1048 #define CHIP_REV(bp)			(CHIP_REV_IS_SLOW(bp) ? \
1049 						CHIP_REV_SIM(bp) :\
1050 						CHIP_REV_VAL(bp))
1051 #define CHIP_IS_E3B0(bp)		(CHIP_IS_E3(bp) && \
1052 					 (CHIP_REV(bp) == CHIP_REV_Bx))
1053 #define CHIP_IS_E3A0(bp)		(CHIP_IS_E3(bp) && \
1054 					 (CHIP_REV(bp) == CHIP_REV_Ax))
1055 /* This define is used in two main places:
1056  * 1. In the early stages of nic_load, to know if to configure Parser / Searcher
1057  * to nic-only mode or to offload mode. Offload mode is configured if either the
1058  * chip is E1x (where MIC_MODE register is not applicable), or if cnic already
1059  * registered for this port (which means that the user wants storage services).
1060  * 2. During cnic-related load, to know if offload mode is already configured in
1061  * the HW or needs to be configured.
1062  * Since the transition from nic-mode to offload-mode in HW causes traffic
1063  * corruption, nic-mode is configured only in ports on which storage services
1064  * where never requested.
1065  */
1066 #define CONFIGURE_NIC_MODE(bp)		(!CHIP_IS_E1x(bp) && !CNIC_ENABLED(bp))
1067 
1068 	int			flash_size;
1069 #define BNX2X_NVRAM_1MB_SIZE			0x20000	/* 1M bit in bytes */
1070 #define BNX2X_NVRAM_TIMEOUT_COUNT		30000
1071 #define BNX2X_NVRAM_PAGE_SIZE			256
1072 
1073 	u32			shmem_base;
1074 	u32			shmem2_base;
1075 	u32			mf_cfg_base;
1076 	u32			mf2_cfg_base;
1077 
1078 	u32			hw_config;
1079 
1080 	u32			bc_ver;
1081 
1082 	u8			int_block;
1083 #define INT_BLOCK_HC			0
1084 #define INT_BLOCK_IGU			1
1085 #define INT_BLOCK_MODE_NORMAL		0
1086 #define INT_BLOCK_MODE_BW_COMP		2
1087 #define CHIP_INT_MODE_IS_NBC(bp)		\
1088 			(!CHIP_IS_E1x(bp) &&	\
1089 			!((bp)->common.int_block & INT_BLOCK_MODE_BW_COMP))
1090 #define CHIP_INT_MODE_IS_BC(bp) (!CHIP_INT_MODE_IS_NBC(bp))
1091 
1092 	u8			chip_port_mode;
1093 #define CHIP_4_PORT_MODE			0x0
1094 #define CHIP_2_PORT_MODE			0x1
1095 #define CHIP_PORT_MODE_NONE			0x2
1096 #define CHIP_MODE(bp)			(bp->common.chip_port_mode)
1097 #define CHIP_MODE_IS_4_PORT(bp) (CHIP_MODE(bp) == CHIP_4_PORT_MODE)
1098 
1099 	u32			boot_mode;
1100 };
1101 
1102 /* IGU MSIX STATISTICS on 57712: 64 for VFs; 4 for PFs; 4 for Attentions */
1103 #define BNX2X_IGU_STAS_MSG_VF_CNT 64
1104 #define BNX2X_IGU_STAS_MSG_PF_CNT 4
1105 
1106 #define MAX_IGU_ATTN_ACK_TO       100
1107 /* end of common */
1108 
1109 /* port */
1110 
1111 struct bnx2x_port {
1112 	u32			pmf;
1113 
1114 	u32			link_config[LINK_CONFIG_SIZE];
1115 
1116 	u32			supported[LINK_CONFIG_SIZE];
1117 
1118 	u32			advertising[LINK_CONFIG_SIZE];
1119 
1120 	u32			phy_addr;
1121 
1122 	/* used to synchronize phy accesses */
1123 	struct mutex		phy_mutex;
1124 
1125 	u32			port_stx;
1126 
1127 	struct nig_stats	old_nig_stats;
1128 };
1129 
1130 /* end of port */
1131 
1132 #define STATS_OFFSET32(stat_name) \
1133 			(offsetof(struct bnx2x_eth_stats, stat_name) / 4)
1134 
1135 /* slow path */
1136 #define BNX2X_MAX_NUM_OF_VFS	64
1137 #define BNX2X_VF_CID_WND	4 /* log num of queues per VF. HW config. */
1138 #define BNX2X_CIDS_PER_VF	(1 << BNX2X_VF_CID_WND)
1139 
1140 /* We need to reserve doorbell addresses for all VF and queue combinations */
1141 #define BNX2X_VF_CIDS		(BNX2X_MAX_NUM_OF_VFS * BNX2X_CIDS_PER_VF)
1142 
1143 /* The doorbell is configured to have the same number of CIDs for PFs and for
1144  * VFs. For this reason the PF CID zone is as large as the VF zone.
1145  */
1146 #define BNX2X_FIRST_VF_CID	BNX2X_VF_CIDS
1147 #define BNX2X_MAX_NUM_VF_QUEUES	64
1148 #define BNX2X_VF_ID_INVALID	0xFF
1149 
1150 /* the number of VF CIDS multiplied by the amount of bytes reserved for each
1151  * cid must not exceed the size of the VF doorbell
1152  */
1153 #define BNX2X_VF_BAR_SIZE	512
1154 #if (BNX2X_VF_BAR_SIZE < BNX2X_CIDS_PER_VF * (1 << BNX2X_DB_SHIFT))
1155 #error "VF doorbell bar size is 512"
1156 #endif
1157 
1158 /*
1159  * The total number of L2 queues, MSIX vectors and HW contexts (CIDs) is
1160  * control by the number of fast-path status blocks supported by the
1161  * device (HW/FW). Each fast-path status block (FP-SB) aka non-default
1162  * status block represents an independent interrupts context that can
1163  * serve a regular L2 networking queue. However special L2 queues such
1164  * as the FCoE queue do not require a FP-SB and other components like
1165  * the CNIC may consume FP-SB reducing the number of possible L2 queues
1166  *
1167  * If the maximum number of FP-SB available is X then:
1168  * a. If CNIC is supported it consumes 1 FP-SB thus the max number of
1169  *    regular L2 queues is Y=X-1
1170  * b. In MF mode the actual number of L2 queues is Y= (X-1/MF_factor)
1171  * c. If the FCoE L2 queue is supported the actual number of L2 queues
1172  *    is Y+1
1173  * d. The number of irqs (MSIX vectors) is either Y+1 (one extra for
1174  *    slow-path interrupts) or Y+2 if CNIC is supported (one additional
1175  *    FP interrupt context for the CNIC).
1176  * e. The number of HW context (CID count) is always X or X+1 if FCoE
1177  *    L2 queue is supported. The cid for the FCoE L2 queue is always X.
1178  */
1179 
1180 /* fast-path interrupt contexts E1x */
1181 #define FP_SB_MAX_E1x		16
1182 /* fast-path interrupt contexts E2 */
1183 #define FP_SB_MAX_E2		HC_SB_MAX_SB_E2
1184 
1185 union cdu_context {
1186 	struct eth_context eth;
1187 	char pad[1024];
1188 };
1189 
1190 /* CDU host DB constants */
1191 #define CDU_ILT_PAGE_SZ_HW	2
1192 #define CDU_ILT_PAGE_SZ		(8192 << CDU_ILT_PAGE_SZ_HW) /* 32K */
1193 #define ILT_PAGE_CIDS		(CDU_ILT_PAGE_SZ / sizeof(union cdu_context))
1194 
1195 #define CNIC_ISCSI_CID_MAX	256
1196 #define CNIC_FCOE_CID_MAX	2048
1197 #define CNIC_CID_MAX		(CNIC_ISCSI_CID_MAX + CNIC_FCOE_CID_MAX)
1198 #define CNIC_ILT_LINES		DIV_ROUND_UP(CNIC_CID_MAX, ILT_PAGE_CIDS)
1199 
1200 #define QM_ILT_PAGE_SZ_HW	0
1201 #define QM_ILT_PAGE_SZ		(4096 << QM_ILT_PAGE_SZ_HW) /* 4K */
1202 #define QM_CID_ROUND		1024
1203 
1204 /* TM (timers) host DB constants */
1205 #define TM_ILT_PAGE_SZ_HW	0
1206 #define TM_ILT_PAGE_SZ		(4096 << TM_ILT_PAGE_SZ_HW) /* 4K */
1207 #define TM_CONN_NUM		(BNX2X_FIRST_VF_CID + \
1208 				 BNX2X_VF_CIDS + \
1209 				 CNIC_ISCSI_CID_MAX)
1210 #define TM_ILT_SZ		(8 * TM_CONN_NUM)
1211 #define TM_ILT_LINES		DIV_ROUND_UP(TM_ILT_SZ, TM_ILT_PAGE_SZ)
1212 
1213 /* SRC (Searcher) host DB constants */
1214 #define SRC_ILT_PAGE_SZ_HW	0
1215 #define SRC_ILT_PAGE_SZ		(4096 << SRC_ILT_PAGE_SZ_HW) /* 4K */
1216 #define SRC_HASH_BITS		10
1217 #define SRC_CONN_NUM		(1 << SRC_HASH_BITS) /* 1024 */
1218 #define SRC_ILT_SZ		(sizeof(struct src_ent) * SRC_CONN_NUM)
1219 #define SRC_T2_SZ		SRC_ILT_SZ
1220 #define SRC_ILT_LINES		DIV_ROUND_UP(SRC_ILT_SZ, SRC_ILT_PAGE_SZ)
1221 
1222 #define MAX_DMAE_C		8
1223 
1224 /* DMA memory not used in fastpath */
1225 struct bnx2x_slowpath {
1226 	union {
1227 		struct mac_configuration_cmd		e1x;
1228 		struct eth_classify_rules_ramrod_data	e2;
1229 	} mac_rdata;
1230 
1231 	union {
1232 		struct eth_classify_rules_ramrod_data	e2;
1233 	} vlan_rdata;
1234 
1235 	union {
1236 		struct tstorm_eth_mac_filter_config	e1x;
1237 		struct eth_filter_rules_ramrod_data	e2;
1238 	} rx_mode_rdata;
1239 
1240 	union {
1241 		struct mac_configuration_cmd		e1;
1242 		struct eth_multicast_rules_ramrod_data  e2;
1243 	} mcast_rdata;
1244 
1245 	struct eth_rss_update_ramrod_data	rss_rdata;
1246 
1247 	/* Queue State related ramrods are always sent under rtnl_lock */
1248 	union {
1249 		struct client_init_ramrod_data  init_data;
1250 		struct client_update_ramrod_data update_data;
1251 		struct tpa_update_ramrod_data tpa_data;
1252 	} q_rdata;
1253 
1254 	union {
1255 		struct function_start_data	func_start;
1256 		/* pfc configuration for DCBX ramrod */
1257 		struct flow_control_configuration pfc_config;
1258 	} func_rdata;
1259 
1260 	/* afex ramrod can not be a part of func_rdata union because these
1261 	 * events might arrive in parallel to other events from func_rdata.
1262 	 * Therefore, if they would have been defined in the same union,
1263 	 * data can get corrupted.
1264 	 */
1265 	union {
1266 		struct afex_vif_list_ramrod_data	viflist_data;
1267 		struct function_update_data		func_update;
1268 	} func_afex_rdata;
1269 
1270 	/* used by dmae command executer */
1271 	struct dmae_command		dmae[MAX_DMAE_C];
1272 
1273 	u32				stats_comp;
1274 	union mac_stats			mac_stats;
1275 	struct nig_stats		nig_stats;
1276 	struct host_port_stats		port_stats;
1277 	struct host_func_stats		func_stats;
1278 
1279 	u32				wb_comp;
1280 	u32				wb_data[4];
1281 
1282 	union drv_info_to_mcp		drv_info_to_mcp;
1283 };
1284 
1285 #define bnx2x_sp(bp, var)		(&bp->slowpath->var)
1286 #define bnx2x_sp_mapping(bp, var) \
1287 		(bp->slowpath_mapping + offsetof(struct bnx2x_slowpath, var))
1288 
1289 /* attn group wiring */
1290 #define MAX_DYNAMIC_ATTN_GRPS		8
1291 
1292 struct attn_route {
1293 	u32 sig[5];
1294 };
1295 
1296 struct iro {
1297 	u32 base;
1298 	u16 m1;
1299 	u16 m2;
1300 	u16 m3;
1301 	u16 size;
1302 };
1303 
1304 struct hw_context {
1305 	union cdu_context *vcxt;
1306 	dma_addr_t cxt_mapping;
1307 	size_t size;
1308 };
1309 
1310 /* forward */
1311 struct bnx2x_ilt;
1312 
1313 struct bnx2x_vfdb;
1314 
1315 enum bnx2x_recovery_state {
1316 	BNX2X_RECOVERY_DONE,
1317 	BNX2X_RECOVERY_INIT,
1318 	BNX2X_RECOVERY_WAIT,
1319 	BNX2X_RECOVERY_FAILED,
1320 	BNX2X_RECOVERY_NIC_LOADING
1321 };
1322 
1323 /*
1324  * Event queue (EQ or event ring) MC hsi
1325  * NUM_EQ_PAGES and EQ_DESC_CNT_PAGE must be power of 2
1326  */
1327 #define NUM_EQ_PAGES		1
1328 #define EQ_DESC_CNT_PAGE	(BCM_PAGE_SIZE / sizeof(union event_ring_elem))
1329 #define EQ_DESC_MAX_PAGE	(EQ_DESC_CNT_PAGE - 1)
1330 #define NUM_EQ_DESC		(EQ_DESC_CNT_PAGE * NUM_EQ_PAGES)
1331 #define EQ_DESC_MASK		(NUM_EQ_DESC - 1)
1332 #define MAX_EQ_AVAIL		(EQ_DESC_MAX_PAGE * NUM_EQ_PAGES - 2)
1333 
1334 /* depends on EQ_DESC_CNT_PAGE being a power of 2 */
1335 #define NEXT_EQ_IDX(x)		((((x) & EQ_DESC_MAX_PAGE) == \
1336 				  (EQ_DESC_MAX_PAGE - 1)) ? (x) + 2 : (x) + 1)
1337 
1338 /* depends on the above and on NUM_EQ_PAGES being a power of 2 */
1339 #define EQ_DESC(x)		((x) & EQ_DESC_MASK)
1340 
1341 #define BNX2X_EQ_INDEX \
1342 	(&bp->def_status_blk->sp_sb.\
1343 	index_values[HC_SP_INDEX_EQ_CONS])
1344 
1345 /* This is a data that will be used to create a link report message.
1346  * We will keep the data used for the last link report in order
1347  * to prevent reporting the same link parameters twice.
1348  */
1349 struct bnx2x_link_report_data {
1350 	u16 line_speed;			/* Effective line speed */
1351 	unsigned long link_report_flags;/* BNX2X_LINK_REPORT_XXX flags */
1352 };
1353 
1354 enum {
1355 	BNX2X_LINK_REPORT_FD,		/* Full DUPLEX */
1356 	BNX2X_LINK_REPORT_LINK_DOWN,
1357 	BNX2X_LINK_REPORT_RX_FC_ON,
1358 	BNX2X_LINK_REPORT_TX_FC_ON,
1359 };
1360 
1361 enum {
1362 	BNX2X_PORT_QUERY_IDX,
1363 	BNX2X_PF_QUERY_IDX,
1364 	BNX2X_FCOE_QUERY_IDX,
1365 	BNX2X_FIRST_QUEUE_QUERY_IDX,
1366 };
1367 
1368 struct bnx2x_fw_stats_req {
1369 	struct stats_query_header hdr;
1370 	struct stats_query_entry query[FP_SB_MAX_E1x+
1371 		BNX2X_FIRST_QUEUE_QUERY_IDX];
1372 };
1373 
1374 struct bnx2x_fw_stats_data {
1375 	struct stats_counter		storm_counters;
1376 	struct per_port_stats		port;
1377 	struct per_pf_stats		pf;
1378 	struct fcoe_statistics_params	fcoe;
1379 	struct per_queue_stats		queue_stats[1];
1380 };
1381 
1382 /* Public slow path states */
1383 enum sp_rtnl_flag {
1384 	BNX2X_SP_RTNL_SETUP_TC,
1385 	BNX2X_SP_RTNL_TX_TIMEOUT,
1386 	BNX2X_SP_RTNL_FAN_FAILURE,
1387 	BNX2X_SP_RTNL_AFEX_F_UPDATE,
1388 	BNX2X_SP_RTNL_ENABLE_SRIOV,
1389 	BNX2X_SP_RTNL_VFPF_MCAST,
1390 	BNX2X_SP_RTNL_VFPF_CHANNEL_DOWN,
1391 	BNX2X_SP_RTNL_RX_MODE,
1392 	BNX2X_SP_RTNL_HYPERVISOR_VLAN,
1393 	BNX2X_SP_RTNL_TX_STOP,
1394 	BNX2X_SP_RTNL_GET_DRV_VERSION,
1395 	BNX2X_SP_RTNL_ADD_VXLAN_PORT,
1396 	BNX2X_SP_RTNL_DEL_VXLAN_PORT,
1397 };
1398 
1399 enum bnx2x_iov_flag {
1400 	BNX2X_IOV_HANDLE_VF_MSG,
1401 	BNX2X_IOV_HANDLE_FLR,
1402 };
1403 
1404 struct bnx2x_prev_path_list {
1405 	struct list_head list;
1406 	u8 bus;
1407 	u8 slot;
1408 	u8 path;
1409 	u8 aer;
1410 	u8 undi;
1411 };
1412 
1413 struct bnx2x_sp_objs {
1414 	/* MACs object */
1415 	struct bnx2x_vlan_mac_obj mac_obj;
1416 
1417 	/* Queue State object */
1418 	struct bnx2x_queue_sp_obj q_obj;
1419 
1420 	/* VLANs object */
1421 	struct bnx2x_vlan_mac_obj vlan_obj;
1422 };
1423 
1424 struct bnx2x_fp_stats {
1425 	struct tstorm_per_queue_stats old_tclient;
1426 	struct ustorm_per_queue_stats old_uclient;
1427 	struct xstorm_per_queue_stats old_xclient;
1428 	struct bnx2x_eth_q_stats eth_q_stats;
1429 	struct bnx2x_eth_q_stats_old eth_q_stats_old;
1430 };
1431 
1432 enum {
1433 	SUB_MF_MODE_UNKNOWN = 0,
1434 	SUB_MF_MODE_UFP,
1435 	SUB_MF_MODE_NPAR1_DOT_5,
1436 	SUB_MF_MODE_BD,
1437 };
1438 
1439 struct bnx2x_vlan_entry {
1440 	struct list_head link;
1441 	u16 vid;
1442 	bool hw;
1443 };
1444 
1445 struct bnx2x {
1446 	/* Fields used in the tx and intr/napi performance paths
1447 	 * are grouped together in the beginning of the structure
1448 	 */
1449 	struct bnx2x_fastpath	*fp;
1450 	struct bnx2x_sp_objs	*sp_objs;
1451 	struct bnx2x_fp_stats	*fp_stats;
1452 	struct bnx2x_fp_txdata	*bnx2x_txq;
1453 	void __iomem		*regview;
1454 	void __iomem		*doorbells;
1455 	u16			db_size;
1456 
1457 	u8			pf_num;	/* absolute PF number */
1458 	u8			pfid;	/* per-path PF number */
1459 	int			base_fw_ndsb; /**/
1460 #define BP_PATH(bp)			(CHIP_IS_E1x(bp) ? 0 : (bp->pf_num & 1))
1461 #define BP_PORT(bp)			(bp->pfid & 1)
1462 #define BP_FUNC(bp)			(bp->pfid)
1463 #define BP_ABS_FUNC(bp)			(bp->pf_num)
1464 #define BP_VN(bp)			((bp)->pfid >> 1)
1465 #define BP_MAX_VN_NUM(bp)		(CHIP_MODE_IS_4_PORT(bp) ? 2 : 4)
1466 #define BP_L_ID(bp)			(BP_VN(bp) << 2)
1467 #define BP_FW_MB_IDX_VN(bp, vn)		(BP_PORT(bp) +\
1468 	  (vn) * ((CHIP_IS_E1x(bp) || (CHIP_MODE_IS_4_PORT(bp))) ? 2  : 1))
1469 #define BP_FW_MB_IDX(bp)		BP_FW_MB_IDX_VN(bp, BP_VN(bp))
1470 
1471 #ifdef CONFIG_BNX2X_SRIOV
1472 	/* protects vf2pf mailbox from simultaneous access */
1473 	struct mutex		vf2pf_mutex;
1474 	/* vf pf channel mailbox contains request and response buffers */
1475 	struct bnx2x_vf_mbx_msg	*vf2pf_mbox;
1476 	dma_addr_t		vf2pf_mbox_mapping;
1477 
1478 	/* we set aside a copy of the acquire response */
1479 	struct pfvf_acquire_resp_tlv acquire_resp;
1480 
1481 	/* bulletin board for messages from pf to vf */
1482 	union pf_vf_bulletin   *pf2vf_bulletin;
1483 	dma_addr_t		pf2vf_bulletin_mapping;
1484 
1485 	union pf_vf_bulletin		shadow_bulletin;
1486 	struct pf_vf_bulletin_content	old_bulletin;
1487 
1488 	u16 requested_nr_virtfn;
1489 #endif /* CONFIG_BNX2X_SRIOV */
1490 
1491 	struct net_device	*dev;
1492 	struct pci_dev		*pdev;
1493 
1494 	const struct iro	*iro_arr;
1495 #define IRO (bp->iro_arr)
1496 
1497 	enum bnx2x_recovery_state recovery_state;
1498 	int			is_leader;
1499 	struct msix_entry	*msix_table;
1500 
1501 	int			tx_ring_size;
1502 
1503 /* L2 header size + 2*VLANs (8 bytes) + LLC SNAP (8 bytes) */
1504 #define ETH_OVREHEAD		(ETH_HLEN + 8 + 8)
1505 #define ETH_MIN_PACKET_SIZE		60
1506 #define ETH_MAX_PACKET_SIZE		1500
1507 #define ETH_MAX_JUMBO_PACKET_SIZE	9600
1508 /* TCP with Timestamp Option (32) + IPv6 (40) */
1509 #define ETH_MAX_TPA_HEADER_SIZE		72
1510 
1511 	/* Max supported alignment is 256 (8 shift)
1512 	 * minimal alignment shift 6 is optimal for 57xxx HW performance
1513 	 */
1514 #define BNX2X_RX_ALIGN_SHIFT		max(6, min(8, L1_CACHE_SHIFT))
1515 
1516 	/* FW uses 2 Cache lines Alignment for start packet and size
1517 	 *
1518 	 * We assume skb_build() uses sizeof(struct skb_shared_info) bytes
1519 	 * at the end of skb->data, to avoid wasting a full cache line.
1520 	 * This reduces memory use (skb->truesize).
1521 	 */
1522 #define BNX2X_FW_RX_ALIGN_START	(1UL << BNX2X_RX_ALIGN_SHIFT)
1523 
1524 #define BNX2X_FW_RX_ALIGN_END					\
1525 	max_t(u64, 1UL << BNX2X_RX_ALIGN_SHIFT,			\
1526 	    SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))
1527 
1528 #define BNX2X_PXP_DRAM_ALIGN		(BNX2X_RX_ALIGN_SHIFT - 5)
1529 
1530 	struct host_sp_status_block *def_status_blk;
1531 #define DEF_SB_IGU_ID			16
1532 #define DEF_SB_ID			HC_SP_SB_ID
1533 	__le16			def_idx;
1534 	__le16			def_att_idx;
1535 	u32			attn_state;
1536 	struct attn_route	attn_group[MAX_DYNAMIC_ATTN_GRPS];
1537 
1538 	/* slow path ring */
1539 	struct eth_spe		*spq;
1540 	dma_addr_t		spq_mapping;
1541 	u16			spq_prod_idx;
1542 	struct eth_spe		*spq_prod_bd;
1543 	struct eth_spe		*spq_last_bd;
1544 	__le16			*dsb_sp_prod;
1545 	atomic_t		cq_spq_left; /* ETH_XXX ramrods credit */
1546 	/* used to synchronize spq accesses */
1547 	spinlock_t		spq_lock;
1548 
1549 	/* event queue */
1550 	union event_ring_elem	*eq_ring;
1551 	dma_addr_t		eq_mapping;
1552 	u16			eq_prod;
1553 	u16			eq_cons;
1554 	__le16			*eq_cons_sb;
1555 	atomic_t		eq_spq_left; /* COMMON_XXX ramrods credit */
1556 
1557 	/* Counter for marking that there is a STAT_QUERY ramrod pending */
1558 	u16			stats_pending;
1559 	/*  Counter for completed statistics ramrods */
1560 	u16			stats_comp;
1561 
1562 	/* End of fields used in the performance code paths */
1563 
1564 	int			panic;
1565 	int			msg_enable;
1566 
1567 	u32			flags;
1568 #define PCIX_FLAG			(1 << 0)
1569 #define PCI_32BIT_FLAG			(1 << 1)
1570 #define ONE_PORT_FLAG			(1 << 2)
1571 #define NO_WOL_FLAG			(1 << 3)
1572 #define USING_MSIX_FLAG			(1 << 5)
1573 #define USING_MSI_FLAG			(1 << 6)
1574 #define DISABLE_MSI_FLAG		(1 << 7)
1575 #define NO_MCP_FLAG			(1 << 9)
1576 #define MF_FUNC_DIS			(1 << 11)
1577 #define OWN_CNIC_IRQ			(1 << 12)
1578 #define NO_ISCSI_OOO_FLAG		(1 << 13)
1579 #define NO_ISCSI_FLAG			(1 << 14)
1580 #define NO_FCOE_FLAG			(1 << 15)
1581 #define BC_SUPPORTS_PFC_STATS		(1 << 17)
1582 #define TX_SWITCHING			(1 << 18)
1583 #define BC_SUPPORTS_FCOE_FEATURES	(1 << 19)
1584 #define USING_SINGLE_MSIX_FLAG		(1 << 20)
1585 #define BC_SUPPORTS_DCBX_MSG_NON_PMF	(1 << 21)
1586 #define IS_VF_FLAG			(1 << 22)
1587 #define BC_SUPPORTS_RMMOD_CMD		(1 << 23)
1588 #define HAS_PHYS_PORT_ID		(1 << 24)
1589 #define AER_ENABLED			(1 << 25)
1590 #define PTP_SUPPORTED			(1 << 26)
1591 #define TX_TIMESTAMPING_EN		(1 << 27)
1592 
1593 #define BP_NOMCP(bp)			((bp)->flags & NO_MCP_FLAG)
1594 
1595 #ifdef CONFIG_BNX2X_SRIOV
1596 #define IS_VF(bp)			((bp)->flags & IS_VF_FLAG)
1597 #define IS_PF(bp)			(!((bp)->flags & IS_VF_FLAG))
1598 #else
1599 #define IS_VF(bp)			false
1600 #define IS_PF(bp)			true
1601 #endif
1602 
1603 #define NO_ISCSI(bp)		((bp)->flags & NO_ISCSI_FLAG)
1604 #define NO_ISCSI_OOO(bp)	((bp)->flags & NO_ISCSI_OOO_FLAG)
1605 #define NO_FCOE(bp)		((bp)->flags & NO_FCOE_FLAG)
1606 
1607 	u8			cnic_support;
1608 	bool			cnic_enabled;
1609 	bool			cnic_loaded;
1610 	struct cnic_eth_dev	*(*cnic_probe)(struct net_device *);
1611 
1612 	/* Flag that indicates that we can start looking for FCoE L2 queue
1613 	 * completions in the default status block.
1614 	 */
1615 	bool			fcoe_init;
1616 
1617 	int			mrrs;
1618 
1619 	struct delayed_work	sp_task;
1620 	struct delayed_work	iov_task;
1621 
1622 	atomic_t		interrupt_occurred;
1623 	struct delayed_work	sp_rtnl_task;
1624 
1625 	struct delayed_work	period_task;
1626 	struct timer_list	timer;
1627 	int			current_interval;
1628 
1629 	u16			fw_seq;
1630 	u16			fw_drv_pulse_wr_seq;
1631 	u32			func_stx;
1632 
1633 	struct link_params	link_params;
1634 	struct link_vars	link_vars;
1635 	u32			link_cnt;
1636 	struct bnx2x_link_report_data last_reported_link;
1637 
1638 	struct mdio_if_info	mdio;
1639 
1640 	struct bnx2x_common	common;
1641 	struct bnx2x_port	port;
1642 
1643 	struct cmng_init	cmng;
1644 
1645 	u32			mf_config[E1HVN_MAX];
1646 	u32			mf_ext_config;
1647 	u32			path_has_ovlan; /* E3 */
1648 	u16			mf_ov;
1649 	u8			mf_mode;
1650 #define IS_MF(bp)		(bp->mf_mode != 0)
1651 #define IS_MF_SI(bp)		(bp->mf_mode == MULTI_FUNCTION_SI)
1652 #define IS_MF_SD(bp)		(bp->mf_mode == MULTI_FUNCTION_SD)
1653 #define IS_MF_AFEX(bp)		(bp->mf_mode == MULTI_FUNCTION_AFEX)
1654 	u8			mf_sub_mode;
1655 #define IS_MF_UFP(bp)		(IS_MF_SD(bp) && \
1656 				 bp->mf_sub_mode == SUB_MF_MODE_UFP)
1657 #define IS_MF_BD(bp)		(IS_MF_SD(bp) && \
1658 				 bp->mf_sub_mode == SUB_MF_MODE_BD)
1659 
1660 	u8			wol;
1661 
1662 	int			rx_ring_size;
1663 
1664 	u16			tx_quick_cons_trip_int;
1665 	u16			tx_quick_cons_trip;
1666 	u16			tx_ticks_int;
1667 	u16			tx_ticks;
1668 
1669 	u16			rx_quick_cons_trip_int;
1670 	u16			rx_quick_cons_trip;
1671 	u16			rx_ticks_int;
1672 	u16			rx_ticks;
1673 /* Maximal coalescing timeout in us */
1674 #define BNX2X_MAX_COALESCE_TOUT		(0xff*BNX2X_BTR)
1675 
1676 	u32			lin_cnt;
1677 
1678 	u16			state;
1679 #define BNX2X_STATE_CLOSED		0
1680 #define BNX2X_STATE_OPENING_WAIT4_LOAD	0x1000
1681 #define BNX2X_STATE_OPENING_WAIT4_PORT	0x2000
1682 #define BNX2X_STATE_OPEN		0x3000
1683 #define BNX2X_STATE_CLOSING_WAIT4_HALT	0x4000
1684 #define BNX2X_STATE_CLOSING_WAIT4_DELETE 0x5000
1685 
1686 #define BNX2X_STATE_DIAG		0xe000
1687 #define BNX2X_STATE_ERROR		0xf000
1688 
1689 #define BNX2X_MAX_PRIORITY		8
1690 	int			num_queues;
1691 	uint			num_ethernet_queues;
1692 	uint			num_cnic_queues;
1693 	int			disable_tpa;
1694 
1695 	u32			rx_mode;
1696 #define BNX2X_RX_MODE_NONE		0
1697 #define BNX2X_RX_MODE_NORMAL		1
1698 #define BNX2X_RX_MODE_ALLMULTI		2
1699 #define BNX2X_RX_MODE_PROMISC		3
1700 #define BNX2X_MAX_MULTICAST		64
1701 
1702 	u8			igu_dsb_id;
1703 	u8			igu_base_sb;
1704 	u8			igu_sb_cnt;
1705 	u8			min_msix_vec_cnt;
1706 
1707 	u32			igu_base_addr;
1708 	dma_addr_t		def_status_blk_mapping;
1709 
1710 	struct bnx2x_slowpath	*slowpath;
1711 	dma_addr_t		slowpath_mapping;
1712 
1713 	/* Mechanism protecting the drv_info_to_mcp */
1714 	struct mutex		drv_info_mutex;
1715 	bool			drv_info_mng_owner;
1716 
1717 	/* Total number of FW statistics requests */
1718 	u8			fw_stats_num;
1719 
1720 	/*
1721 	 * This is a memory buffer that will contain both statistics
1722 	 * ramrod request and data.
1723 	 */
1724 	void			*fw_stats;
1725 	dma_addr_t		fw_stats_mapping;
1726 
1727 	/*
1728 	 * FW statistics request shortcut (points at the
1729 	 * beginning of fw_stats buffer).
1730 	 */
1731 	struct bnx2x_fw_stats_req	*fw_stats_req;
1732 	dma_addr_t			fw_stats_req_mapping;
1733 	int				fw_stats_req_sz;
1734 
1735 	/*
1736 	 * FW statistics data shortcut (points at the beginning of
1737 	 * fw_stats buffer + fw_stats_req_sz).
1738 	 */
1739 	struct bnx2x_fw_stats_data	*fw_stats_data;
1740 	dma_addr_t			fw_stats_data_mapping;
1741 	int				fw_stats_data_sz;
1742 
1743 	/* For max 1024 cids (VF RSS), 32KB ILT page size and 1KB
1744 	 * context size we need 8 ILT entries.
1745 	 */
1746 #define ILT_MAX_L2_LINES	32
1747 	struct hw_context	context[ILT_MAX_L2_LINES];
1748 
1749 	struct bnx2x_ilt	*ilt;
1750 #define BP_ILT(bp)		((bp)->ilt)
1751 #define ILT_MAX_LINES		256
1752 /*
1753  * Maximum supported number of RSS queues: number of IGU SBs minus one that goes
1754  * to CNIC.
1755  */
1756 #define BNX2X_MAX_RSS_COUNT(bp)	((bp)->igu_sb_cnt - CNIC_SUPPORT(bp))
1757 
1758 /*
1759  * Maximum CID count that might be required by the bnx2x:
1760  * Max RSS * Max_Tx_Multi_Cos + FCoE + iSCSI
1761  */
1762 
1763 #define BNX2X_L2_CID_COUNT(bp)	(BNX2X_NUM_ETH_QUEUES(bp) * BNX2X_MULTI_TX_COS \
1764 				+ CNIC_SUPPORT(bp) * (2 + UIO_CID_PAD(bp)))
1765 #define BNX2X_L2_MAX_CID(bp)	(BNX2X_MAX_RSS_COUNT(bp) * BNX2X_MULTI_TX_COS \
1766 				+ CNIC_SUPPORT(bp) * (2 + UIO_CID_PAD(bp)))
1767 #define L2_ILT_LINES(bp)	(DIV_ROUND_UP(BNX2X_L2_CID_COUNT(bp),\
1768 					ILT_PAGE_CIDS))
1769 
1770 	int			qm_cid_count;
1771 
1772 	bool			dropless_fc;
1773 
1774 	void			*t2;
1775 	dma_addr_t		t2_mapping;
1776 	struct cnic_ops	__rcu	*cnic_ops;
1777 	void			*cnic_data;
1778 	u32			cnic_tag;
1779 	struct cnic_eth_dev	cnic_eth_dev;
1780 	union host_hc_status_block cnic_sb;
1781 	dma_addr_t		cnic_sb_mapping;
1782 	struct eth_spe		*cnic_kwq;
1783 	struct eth_spe		*cnic_kwq_prod;
1784 	struct eth_spe		*cnic_kwq_cons;
1785 	struct eth_spe		*cnic_kwq_last;
1786 	u16			cnic_kwq_pending;
1787 	u16			cnic_spq_pending;
1788 	u8			fip_mac[ETH_ALEN];
1789 	struct mutex		cnic_mutex;
1790 	struct bnx2x_vlan_mac_obj iscsi_l2_mac_obj;
1791 
1792 	/* Start index of the "special" (CNIC related) L2 clients */
1793 	u8				cnic_base_cl_id;
1794 
1795 	int			dmae_ready;
1796 	/* used to synchronize dmae accesses */
1797 	spinlock_t		dmae_lock;
1798 
1799 	/* used to protect the FW mail box */
1800 	struct mutex		fw_mb_mutex;
1801 
1802 	/* used to synchronize stats collecting */
1803 	int			stats_state;
1804 
1805 	/* used for synchronization of concurrent threads statistics handling */
1806 	struct semaphore	stats_lock;
1807 
1808 	/* used by dmae command loader */
1809 	struct dmae_command	stats_dmae;
1810 	int			executer_idx;
1811 
1812 	u16			stats_counter;
1813 	struct bnx2x_eth_stats	eth_stats;
1814 	struct host_func_stats		func_stats;
1815 	struct bnx2x_eth_stats_old	eth_stats_old;
1816 	struct bnx2x_net_stats_old	net_stats_old;
1817 	struct bnx2x_fw_port_stats_old	fw_stats_old;
1818 	bool			stats_init;
1819 
1820 	struct z_stream_s	*strm;
1821 	void			*gunzip_buf;
1822 	dma_addr_t		gunzip_mapping;
1823 	int			gunzip_outlen;
1824 #define FW_BUF_SIZE			0x8000
1825 #define GUNZIP_BUF(bp)			(bp->gunzip_buf)
1826 #define GUNZIP_PHYS(bp)			(bp->gunzip_mapping)
1827 #define GUNZIP_OUTLEN(bp)		(bp->gunzip_outlen)
1828 
1829 	struct raw_op		*init_ops;
1830 	/* Init blocks offsets inside init_ops */
1831 	u16			*init_ops_offsets;
1832 	/* Data blob - has 32 bit granularity */
1833 	u32			*init_data;
1834 	u32			init_mode_flags;
1835 #define INIT_MODE_FLAGS(bp)	(bp->init_mode_flags)
1836 	/* Zipped PRAM blobs - raw data */
1837 	const u8		*tsem_int_table_data;
1838 	const u8		*tsem_pram_data;
1839 	const u8		*usem_int_table_data;
1840 	const u8		*usem_pram_data;
1841 	const u8		*xsem_int_table_data;
1842 	const u8		*xsem_pram_data;
1843 	const u8		*csem_int_table_data;
1844 	const u8		*csem_pram_data;
1845 #define INIT_OPS(bp)			(bp->init_ops)
1846 #define INIT_OPS_OFFSETS(bp)		(bp->init_ops_offsets)
1847 #define INIT_DATA(bp)			(bp->init_data)
1848 #define INIT_TSEM_INT_TABLE_DATA(bp)	(bp->tsem_int_table_data)
1849 #define INIT_TSEM_PRAM_DATA(bp)		(bp->tsem_pram_data)
1850 #define INIT_USEM_INT_TABLE_DATA(bp)	(bp->usem_int_table_data)
1851 #define INIT_USEM_PRAM_DATA(bp)		(bp->usem_pram_data)
1852 #define INIT_XSEM_INT_TABLE_DATA(bp)	(bp->xsem_int_table_data)
1853 #define INIT_XSEM_PRAM_DATA(bp)		(bp->xsem_pram_data)
1854 #define INIT_CSEM_INT_TABLE_DATA(bp)	(bp->csem_int_table_data)
1855 #define INIT_CSEM_PRAM_DATA(bp)		(bp->csem_pram_data)
1856 
1857 #define PHY_FW_VER_LEN			20
1858 	char			fw_ver[32];
1859 	const struct firmware	*firmware;
1860 
1861 	struct bnx2x_vfdb	*vfdb;
1862 #define IS_SRIOV(bp)		((bp)->vfdb)
1863 
1864 	/* DCB support on/off */
1865 	u16 dcb_state;
1866 #define BNX2X_DCB_STATE_OFF			0
1867 #define BNX2X_DCB_STATE_ON			1
1868 
1869 	/* DCBX engine mode */
1870 	int dcbx_enabled;
1871 #define BNX2X_DCBX_ENABLED_OFF			0
1872 #define BNX2X_DCBX_ENABLED_ON_NEG_OFF		1
1873 #define BNX2X_DCBX_ENABLED_ON_NEG_ON		2
1874 #define BNX2X_DCBX_ENABLED_INVALID		(-1)
1875 
1876 	bool dcbx_mode_uset;
1877 
1878 	struct bnx2x_config_dcbx_params		dcbx_config_params;
1879 	struct bnx2x_dcbx_port_params		dcbx_port_params;
1880 	int					dcb_version;
1881 
1882 	/* CAM credit pools */
1883 	struct bnx2x_credit_pool_obj		vlans_pool;
1884 
1885 	struct bnx2x_credit_pool_obj		macs_pool;
1886 
1887 	/* RX_MODE object */
1888 	struct bnx2x_rx_mode_obj		rx_mode_obj;
1889 
1890 	/* MCAST object */
1891 	struct bnx2x_mcast_obj			mcast_obj;
1892 
1893 	/* RSS configuration object */
1894 	struct bnx2x_rss_config_obj		rss_conf_obj;
1895 
1896 	/* Function State controlling object */
1897 	struct bnx2x_func_sp_obj		func_obj;
1898 
1899 	unsigned long				sp_state;
1900 
1901 	/* operation indication for the sp_rtnl task */
1902 	unsigned long				sp_rtnl_state;
1903 
1904 	/* Indication of the IOV tasks */
1905 	unsigned long				iov_task_state;
1906 
1907 	/* DCBX Negotiation results */
1908 	struct dcbx_features			dcbx_local_feat;
1909 	u32					dcbx_error;
1910 
1911 #ifdef BCM_DCBNL
1912 	struct dcbx_features			dcbx_remote_feat;
1913 	u32					dcbx_remote_flags;
1914 #endif
1915 	/* AFEX: store default vlan used */
1916 	int					afex_def_vlan_tag;
1917 	enum mf_cfg_afex_vlan_mode		afex_vlan_mode;
1918 	u32					pending_max;
1919 
1920 	/* multiple tx classes of service */
1921 	u8					max_cos;
1922 
1923 	/* priority to cos mapping */
1924 	u8					prio_to_cos[8];
1925 
1926 	int fp_array_size;
1927 	u32 dump_preset_idx;
1928 
1929 	u8					phys_port_id[ETH_ALEN];
1930 
1931 	/* PTP related context */
1932 	struct ptp_clock *ptp_clock;
1933 	struct ptp_clock_info ptp_clock_info;
1934 	struct work_struct ptp_task;
1935 	struct cyclecounter cyclecounter;
1936 	struct timecounter timecounter;
1937 	bool timecounter_init_done;
1938 	struct sk_buff *ptp_tx_skb;
1939 	unsigned long ptp_tx_start;
1940 	bool hwtstamp_ioctl_called;
1941 	u16 tx_type;
1942 	u16 rx_filter;
1943 
1944 	struct bnx2x_link_report_data		vf_link_vars;
1945 	struct list_head vlan_reg;
1946 	u16 vlan_cnt;
1947 	u16 vlan_credit;
1948 	u16 vxlan_dst_port;
1949 	u8 vxlan_dst_port_count;
1950 	bool accept_any_vlan;
1951 };
1952 
1953 /* Tx queues may be less or equal to Rx queues */
1954 extern int num_queues;
1955 #define BNX2X_NUM_QUEUES(bp)	(bp->num_queues)
1956 #define BNX2X_NUM_ETH_QUEUES(bp) ((bp)->num_ethernet_queues)
1957 #define BNX2X_NUM_NON_CNIC_QUEUES(bp)	(BNX2X_NUM_QUEUES(bp) - \
1958 					 (bp)->num_cnic_queues)
1959 #define BNX2X_NUM_RX_QUEUES(bp)	BNX2X_NUM_QUEUES(bp)
1960 
1961 #define is_multi(bp)		(BNX2X_NUM_QUEUES(bp) > 1)
1962 
1963 #define BNX2X_MAX_QUEUES(bp)	BNX2X_MAX_RSS_COUNT(bp)
1964 /* #define is_eth_multi(bp)	(BNX2X_NUM_ETH_QUEUES(bp) > 1) */
1965 
1966 #define RSS_IPV4_CAP_MASK						\
1967 	TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV4_CAPABILITY
1968 
1969 #define RSS_IPV4_TCP_CAP_MASK						\
1970 	TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV4_TCP_CAPABILITY
1971 
1972 #define RSS_IPV6_CAP_MASK						\
1973 	TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV6_CAPABILITY
1974 
1975 #define RSS_IPV6_TCP_CAP_MASK						\
1976 	TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV6_TCP_CAPABILITY
1977 
1978 struct bnx2x_func_init_params {
1979 	/* dma */
1980 	bool		spq_active;
1981 	dma_addr_t	spq_map;
1982 	u16		spq_prod;
1983 
1984 	u16		func_id;	/* abs fid */
1985 	u16		pf_id;
1986 };
1987 
1988 #define for_each_cnic_queue(bp, var) \
1989 	for ((var) = BNX2X_NUM_ETH_QUEUES(bp); (var) < BNX2X_NUM_QUEUES(bp); \
1990 	     (var)++) \
1991 		if (skip_queue(bp, var))	\
1992 			continue;		\
1993 		else
1994 
1995 #define for_each_eth_queue(bp, var) \
1996 	for ((var) = 0; (var) < BNX2X_NUM_ETH_QUEUES(bp); (var)++)
1997 
1998 #define for_each_nondefault_eth_queue(bp, var) \
1999 	for ((var) = 1; (var) < BNX2X_NUM_ETH_QUEUES(bp); (var)++)
2000 
2001 #define for_each_queue(bp, var) \
2002 	for ((var) = 0; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \
2003 		if (skip_queue(bp, var))	\
2004 			continue;		\
2005 		else
2006 
2007 /* Skip forwarding FP */
2008 #define for_each_valid_rx_queue(bp, var)			\
2009 	for ((var) = 0;						\
2010 	     (var) < (CNIC_LOADED(bp) ? BNX2X_NUM_QUEUES(bp) :	\
2011 		      BNX2X_NUM_ETH_QUEUES(bp));		\
2012 	     (var)++)						\
2013 		if (skip_rx_queue(bp, var))			\
2014 			continue;				\
2015 		else
2016 
2017 #define for_each_rx_queue_cnic(bp, var) \
2018 	for ((var) = BNX2X_NUM_ETH_QUEUES(bp); (var) < BNX2X_NUM_QUEUES(bp); \
2019 	     (var)++) \
2020 		if (skip_rx_queue(bp, var))	\
2021 			continue;		\
2022 		else
2023 
2024 #define for_each_rx_queue(bp, var) \
2025 	for ((var) = 0; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \
2026 		if (skip_rx_queue(bp, var))	\
2027 			continue;		\
2028 		else
2029 
2030 /* Skip OOO FP */
2031 #define for_each_valid_tx_queue(bp, var)			\
2032 	for ((var) = 0;						\
2033 	     (var) < (CNIC_LOADED(bp) ? BNX2X_NUM_QUEUES(bp) :	\
2034 		      BNX2X_NUM_ETH_QUEUES(bp));		\
2035 	     (var)++)						\
2036 		if (skip_tx_queue(bp, var))			\
2037 			continue;				\
2038 		else
2039 
2040 #define for_each_tx_queue_cnic(bp, var) \
2041 	for ((var) = BNX2X_NUM_ETH_QUEUES(bp); (var) < BNX2X_NUM_QUEUES(bp); \
2042 	     (var)++) \
2043 		if (skip_tx_queue(bp, var))	\
2044 			continue;		\
2045 		else
2046 
2047 #define for_each_tx_queue(bp, var) \
2048 	for ((var) = 0; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \
2049 		if (skip_tx_queue(bp, var))	\
2050 			continue;		\
2051 		else
2052 
2053 #define for_each_nondefault_queue(bp, var) \
2054 	for ((var) = 1; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \
2055 		if (skip_queue(bp, var))	\
2056 			continue;		\
2057 		else
2058 
2059 #define for_each_cos_in_tx_queue(fp, var) \
2060 	for ((var) = 0; (var) < (fp)->max_cos; (var)++)
2061 
2062 /* skip rx queue
2063  * if FCOE l2 support is disabled and this is the fcoe L2 queue
2064  */
2065 #define skip_rx_queue(bp, idx)	(NO_FCOE(bp) && IS_FCOE_IDX(idx))
2066 
2067 /* skip tx queue
2068  * if FCOE l2 support is disabled and this is the fcoe L2 queue
2069  */
2070 #define skip_tx_queue(bp, idx)	(NO_FCOE(bp) && IS_FCOE_IDX(idx))
2071 
2072 #define skip_queue(bp, idx)	(NO_FCOE(bp) && IS_FCOE_IDX(idx))
2073 
2074 /**
2075  * bnx2x_set_mac_one - configure a single MAC address
2076  *
2077  * @bp:			driver handle
2078  * @mac:		MAC to configure
2079  * @obj:		MAC object handle
2080  * @set:		if 'true' add a new MAC, otherwise - delete
2081  * @mac_type:		the type of the MAC to configure (e.g. ETH, UC list)
2082  * @ramrod_flags:	RAMROD_XXX flags (e.g. RAMROD_CONT, RAMROD_COMP_WAIT)
2083  *
2084  * Configures one MAC according to provided parameters or continues the
2085  * execution of previously scheduled commands if RAMROD_CONT is set in
2086  * ramrod_flags.
2087  *
2088  * Returns zero if operation has successfully completed, a positive value if the
2089  * operation has been successfully scheduled and a negative - if a requested
2090  * operations has failed.
2091  */
2092 int bnx2x_set_mac_one(struct bnx2x *bp, u8 *mac,
2093 		      struct bnx2x_vlan_mac_obj *obj, bool set,
2094 		      int mac_type, unsigned long *ramrod_flags);
2095 
2096 int bnx2x_set_vlan_one(struct bnx2x *bp, u16 vlan,
2097 		       struct bnx2x_vlan_mac_obj *obj, bool set,
2098 		       unsigned long *ramrod_flags);
2099 
2100 /**
2101  * bnx2x_del_all_macs - delete all MACs configured for the specific MAC object
2102  *
2103  * @bp:			driver handle
2104  * @mac_obj:		MAC object handle
2105  * @mac_type:		type of the MACs to clear (BNX2X_XXX_MAC)
2106  * @wait_for_comp:	if 'true' block until completion
2107  *
2108  * Deletes all MACs of the specific type (e.g. ETH, UC list).
2109  *
2110  * Returns zero if operation has successfully completed, a positive value if the
2111  * operation has been successfully scheduled and a negative - if a requested
2112  * operations has failed.
2113  */
2114 int bnx2x_del_all_macs(struct bnx2x *bp,
2115 		       struct bnx2x_vlan_mac_obj *mac_obj,
2116 		       int mac_type, bool wait_for_comp);
2117 
2118 /* Init Function API  */
2119 void bnx2x_func_init(struct bnx2x *bp, struct bnx2x_func_init_params *p);
2120 void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid,
2121 		    u8 vf_valid, int fw_sb_id, int igu_sb_id);
2122 int bnx2x_get_gpio(struct bnx2x *bp, int gpio_num, u8 port);
2123 int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port);
2124 int bnx2x_set_mult_gpio(struct bnx2x *bp, u8 pins, u32 mode);
2125 int bnx2x_set_gpio_int(struct bnx2x *bp, int gpio_num, u32 mode, u8 port);
2126 void bnx2x_read_mf_cfg(struct bnx2x *bp);
2127 
2128 int bnx2x_pretend_func(struct bnx2x *bp, u16 pretend_func_val);
2129 
2130 /* dmae */
2131 void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32);
2132 void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr,
2133 		      u32 len32);
2134 void bnx2x_post_dmae(struct bnx2x *bp, struct dmae_command *dmae, int idx);
2135 u32 bnx2x_dmae_opcode_add_comp(u32 opcode, u8 comp_type);
2136 u32 bnx2x_dmae_opcode_clr_src_reset(u32 opcode);
2137 u32 bnx2x_dmae_opcode(struct bnx2x *bp, u8 src_type, u8 dst_type,
2138 		      bool with_comp, u8 comp_type);
2139 
2140 void bnx2x_prep_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae,
2141 			       u8 src_type, u8 dst_type);
2142 int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae,
2143 			       u32 *comp);
2144 
2145 /* FLR related routines */
2146 u32 bnx2x_flr_clnup_poll_count(struct bnx2x *bp);
2147 void bnx2x_tx_hw_flushed(struct bnx2x *bp, u32 poll_count);
2148 int bnx2x_send_final_clnup(struct bnx2x *bp, u8 clnup_func, u32 poll_cnt);
2149 u8 bnx2x_is_pcie_pending(struct pci_dev *dev);
2150 int bnx2x_flr_clnup_poll_hw_counter(struct bnx2x *bp, u32 reg,
2151 				    char *msg, u32 poll_cnt);
2152 
2153 void bnx2x_calc_fc_adv(struct bnx2x *bp);
2154 int bnx2x_sp_post(struct bnx2x *bp, int command, int cid,
2155 		  u32 data_hi, u32 data_lo, int cmd_type);
2156 void bnx2x_update_coalesce(struct bnx2x *bp);
2157 int bnx2x_get_cur_phy_idx(struct bnx2x *bp);
2158 
2159 bool bnx2x_port_after_undi(struct bnx2x *bp);
2160 
2161 static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
2162 			   int wait)
2163 {
2164 	u32 val;
2165 
2166 	do {
2167 		val = REG_RD(bp, reg);
2168 		if (val == expected)
2169 			break;
2170 		ms -= wait;
2171 		msleep(wait);
2172 
2173 	} while (ms > 0);
2174 
2175 	return val;
2176 }
2177 
2178 void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id,
2179 			    bool is_pf);
2180 
2181 #define BNX2X_ILT_ZALLOC(x, y, size)					\
2182 	x = dma_zalloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL)
2183 
2184 #define BNX2X_ILT_FREE(x, y, size) \
2185 	do { \
2186 		if (x) { \
2187 			dma_free_coherent(&bp->pdev->dev, size, x, y); \
2188 			x = NULL; \
2189 			y = 0; \
2190 		} \
2191 	} while (0)
2192 
2193 #define ILOG2(x)	(ilog2((x)))
2194 
2195 #define ILT_NUM_PAGE_ENTRIES	(3072)
2196 /* In 57710/11 we use whole table since we have 8 func
2197  * In 57712 we have only 4 func, but use same size per func, then only half of
2198  * the table in use
2199  */
2200 #define ILT_PER_FUNC		(ILT_NUM_PAGE_ENTRIES/8)
2201 
2202 #define FUNC_ILT_BASE(func)	(func * ILT_PER_FUNC)
2203 /*
2204  * the phys address is shifted right 12 bits and has an added
2205  * 1=valid bit added to the 53rd bit
2206  * then since this is a wide register(TM)
2207  * we split it into two 32 bit writes
2208  */
2209 #define ONCHIP_ADDR1(x)		((u32)(((u64)x >> 12) & 0xFFFFFFFF))
2210 #define ONCHIP_ADDR2(x)		((u32)((1 << 20) | ((u64)x >> 44)))
2211 
2212 /* load/unload mode */
2213 #define LOAD_NORMAL			0
2214 #define LOAD_OPEN			1
2215 #define LOAD_DIAG			2
2216 #define LOAD_LOOPBACK_EXT		3
2217 #define UNLOAD_NORMAL			0
2218 #define UNLOAD_CLOSE			1
2219 #define UNLOAD_RECOVERY			2
2220 
2221 /* DMAE command defines */
2222 #define DMAE_TIMEOUT			-1
2223 #define DMAE_PCI_ERROR			-2	/* E2 and onward */
2224 #define DMAE_NOT_RDY			-3
2225 #define DMAE_PCI_ERR_FLAG		0x80000000
2226 
2227 #define DMAE_SRC_PCI			0
2228 #define DMAE_SRC_GRC			1
2229 
2230 #define DMAE_DST_NONE			0
2231 #define DMAE_DST_PCI			1
2232 #define DMAE_DST_GRC			2
2233 
2234 #define DMAE_COMP_PCI			0
2235 #define DMAE_COMP_GRC			1
2236 
2237 /* E2 and onward - PCI error handling in the completion */
2238 
2239 #define DMAE_COMP_REGULAR		0
2240 #define DMAE_COM_SET_ERR		1
2241 
2242 #define DMAE_CMD_SRC_PCI		(DMAE_SRC_PCI << \
2243 						DMAE_COMMAND_SRC_SHIFT)
2244 #define DMAE_CMD_SRC_GRC		(DMAE_SRC_GRC << \
2245 						DMAE_COMMAND_SRC_SHIFT)
2246 
2247 #define DMAE_CMD_DST_PCI		(DMAE_DST_PCI << \
2248 						DMAE_COMMAND_DST_SHIFT)
2249 #define DMAE_CMD_DST_GRC		(DMAE_DST_GRC << \
2250 						DMAE_COMMAND_DST_SHIFT)
2251 
2252 #define DMAE_CMD_C_DST_PCI		(DMAE_COMP_PCI << \
2253 						DMAE_COMMAND_C_DST_SHIFT)
2254 #define DMAE_CMD_C_DST_GRC		(DMAE_COMP_GRC << \
2255 						DMAE_COMMAND_C_DST_SHIFT)
2256 
2257 #define DMAE_CMD_C_ENABLE		DMAE_COMMAND_C_TYPE_ENABLE
2258 
2259 #define DMAE_CMD_ENDIANITY_NO_SWAP	(0 << DMAE_COMMAND_ENDIANITY_SHIFT)
2260 #define DMAE_CMD_ENDIANITY_B_SWAP	(1 << DMAE_COMMAND_ENDIANITY_SHIFT)
2261 #define DMAE_CMD_ENDIANITY_DW_SWAP	(2 << DMAE_COMMAND_ENDIANITY_SHIFT)
2262 #define DMAE_CMD_ENDIANITY_B_DW_SWAP	(3 << DMAE_COMMAND_ENDIANITY_SHIFT)
2263 
2264 #define DMAE_CMD_PORT_0			0
2265 #define DMAE_CMD_PORT_1			DMAE_COMMAND_PORT
2266 
2267 #define DMAE_CMD_SRC_RESET		DMAE_COMMAND_SRC_RESET
2268 #define DMAE_CMD_DST_RESET		DMAE_COMMAND_DST_RESET
2269 #define DMAE_CMD_E1HVN_SHIFT		DMAE_COMMAND_E1HVN_SHIFT
2270 
2271 #define DMAE_SRC_PF			0
2272 #define DMAE_SRC_VF			1
2273 
2274 #define DMAE_DST_PF			0
2275 #define DMAE_DST_VF			1
2276 
2277 #define DMAE_C_SRC			0
2278 #define DMAE_C_DST			1
2279 
2280 #define DMAE_LEN32_RD_MAX		0x80
2281 #define DMAE_LEN32_WR_MAX(bp)		(CHIP_IS_E1(bp) ? 0x400 : 0x2000)
2282 
2283 #define DMAE_COMP_VAL			0x60d0d0ae /* E2 and on - upper bit
2284 						    * indicates error
2285 						    */
2286 
2287 #define MAX_DMAE_C_PER_PORT		8
2288 #define INIT_DMAE_C(bp)			(BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \
2289 					 BP_VN(bp))
2290 #define PMF_DMAE_C(bp)			(BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \
2291 					 E1HVN_MAX)
2292 
2293 /* PCIE link and speed */
2294 #define PCICFG_LINK_WIDTH		0x1f00000
2295 #define PCICFG_LINK_WIDTH_SHIFT		20
2296 #define PCICFG_LINK_SPEED		0xf0000
2297 #define PCICFG_LINK_SPEED_SHIFT		16
2298 
2299 #define BNX2X_NUM_TESTS_SF		7
2300 #define BNX2X_NUM_TESTS_MF		3
2301 #define BNX2X_NUM_TESTS(bp)		(IS_MF(bp) ? BNX2X_NUM_TESTS_MF : \
2302 					     IS_VF(bp) ? 0 : BNX2X_NUM_TESTS_SF)
2303 
2304 #define BNX2X_PHY_LOOPBACK		0
2305 #define BNX2X_MAC_LOOPBACK		1
2306 #define BNX2X_EXT_LOOPBACK		2
2307 #define BNX2X_PHY_LOOPBACK_FAILED	1
2308 #define BNX2X_MAC_LOOPBACK_FAILED	2
2309 #define BNX2X_EXT_LOOPBACK_FAILED	3
2310 #define BNX2X_LOOPBACK_FAILED		(BNX2X_MAC_LOOPBACK_FAILED | \
2311 					 BNX2X_PHY_LOOPBACK_FAILED)
2312 
2313 #define STROM_ASSERT_ARRAY_SIZE		50
2314 
2315 /* must be used on a CID before placing it on a HW ring */
2316 #define HW_CID(bp, x)			((BP_PORT(bp) << 23) | \
2317 					 (BP_VN(bp) << BNX2X_SWCID_SHIFT) | \
2318 					 (x))
2319 
2320 #define SP_DESC_CNT		(BCM_PAGE_SIZE / sizeof(struct eth_spe))
2321 #define MAX_SP_DESC_CNT			(SP_DESC_CNT - 1)
2322 
2323 #define BNX2X_BTR			4
2324 #define MAX_SPQ_PENDING			8
2325 
2326 /* CMNG constants, as derived from system spec calculations */
2327 /* default MIN rate in case VNIC min rate is configured to zero - 100Mbps */
2328 #define DEF_MIN_RATE					100
2329 /* resolution of the rate shaping timer - 400 usec */
2330 #define RS_PERIODIC_TIMEOUT_USEC			400
2331 /* number of bytes in single QM arbitration cycle -
2332  * coefficient for calculating the fairness timer */
2333 #define QM_ARB_BYTES					160000
2334 /* resolution of Min algorithm 1:100 */
2335 #define MIN_RES						100
2336 /* how many bytes above threshold for the minimal credit of Min algorithm*/
2337 #define MIN_ABOVE_THRESH				32768
2338 /* Fairness algorithm integration time coefficient -
2339  * for calculating the actual Tfair */
2340 #define T_FAIR_COEF	((MIN_ABOVE_THRESH +  QM_ARB_BYTES) * 8 * MIN_RES)
2341 /* Memory of fairness algorithm . 2 cycles */
2342 #define FAIR_MEM					2
2343 
2344 #define ATTN_NIG_FOR_FUNC		(1L << 8)
2345 #define ATTN_SW_TIMER_4_FUNC		(1L << 9)
2346 #define GPIO_2_FUNC			(1L << 10)
2347 #define GPIO_3_FUNC			(1L << 11)
2348 #define GPIO_4_FUNC			(1L << 12)
2349 #define ATTN_GENERAL_ATTN_1		(1L << 13)
2350 #define ATTN_GENERAL_ATTN_2		(1L << 14)
2351 #define ATTN_GENERAL_ATTN_3		(1L << 15)
2352 #define ATTN_GENERAL_ATTN_4		(1L << 13)
2353 #define ATTN_GENERAL_ATTN_5		(1L << 14)
2354 #define ATTN_GENERAL_ATTN_6		(1L << 15)
2355 
2356 #define ATTN_HARD_WIRED_MASK		0xff00
2357 #define ATTENTION_ID			4
2358 
2359 #define IS_MF_STORAGE_ONLY(bp) (IS_MF_STORAGE_PERSONALITY_ONLY(bp) || \
2360 				 IS_MF_FCOE_AFEX(bp))
2361 
2362 /* stuff added to make the code fit 80Col */
2363 
2364 #define BNX2X_PMF_LINK_ASSERT \
2365 	GENERAL_ATTEN_OFFSET(LINK_SYNC_ATTENTION_BIT_FUNC_0 + BP_FUNC(bp))
2366 
2367 #define BNX2X_MC_ASSERT_BITS \
2368 	(GENERAL_ATTEN_OFFSET(TSTORM_FATAL_ASSERT_ATTENTION_BIT) | \
2369 	 GENERAL_ATTEN_OFFSET(USTORM_FATAL_ASSERT_ATTENTION_BIT) | \
2370 	 GENERAL_ATTEN_OFFSET(CSTORM_FATAL_ASSERT_ATTENTION_BIT) | \
2371 	 GENERAL_ATTEN_OFFSET(XSTORM_FATAL_ASSERT_ATTENTION_BIT))
2372 
2373 #define BNX2X_MCP_ASSERT \
2374 	GENERAL_ATTEN_OFFSET(MCP_FATAL_ASSERT_ATTENTION_BIT)
2375 
2376 #define BNX2X_GRC_TIMEOUT	GENERAL_ATTEN_OFFSET(LATCHED_ATTN_TIMEOUT_GRC)
2377 #define BNX2X_GRC_RSV		(GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCR) | \
2378 				 GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCT) | \
2379 				 GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCN) | \
2380 				 GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCU) | \
2381 				 GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RBCP) | \
2382 				 GENERAL_ATTEN_OFFSET(LATCHED_ATTN_RSVD_GRC))
2383 
2384 #define HW_INTERRUT_ASSERT_SET_0 \
2385 				(AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT | \
2386 				 AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT | \
2387 				 AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT | \
2388 				 AEU_INPUTS_ATTN_BITS_BRB_HW_INTERRUPT | \
2389 				 AEU_INPUTS_ATTN_BITS_PBCLIENT_HW_INTERRUPT)
2390 #define HW_PRTY_ASSERT_SET_0	(AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR | \
2391 				 AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR | \
2392 				 AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR | \
2393 				 AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR |\
2394 				 AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR |\
2395 				 AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR |\
2396 				 AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR)
2397 #define HW_INTERRUT_ASSERT_SET_1 \
2398 				(AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT | \
2399 				 AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT | \
2400 				 AEU_INPUTS_ATTN_BITS_XSDM_HW_INTERRUPT | \
2401 				 AEU_INPUTS_ATTN_BITS_XCM_HW_INTERRUPT | \
2402 				 AEU_INPUTS_ATTN_BITS_XSEMI_HW_INTERRUPT | \
2403 				 AEU_INPUTS_ATTN_BITS_USDM_HW_INTERRUPT | \
2404 				 AEU_INPUTS_ATTN_BITS_UCM_HW_INTERRUPT | \
2405 				 AEU_INPUTS_ATTN_BITS_USEMI_HW_INTERRUPT | \
2406 				 AEU_INPUTS_ATTN_BITS_UPB_HW_INTERRUPT | \
2407 				 AEU_INPUTS_ATTN_BITS_CSDM_HW_INTERRUPT | \
2408 				 AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT)
2409 #define HW_PRTY_ASSERT_SET_1	(AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR |\
2410 				 AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR | \
2411 				 AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR |\
2412 				 AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR | \
2413 				 AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR |\
2414 				 AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR | \
2415 				 AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR |\
2416 				 AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR |\
2417 			     AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR |\
2418 				 AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR | \
2419 				 AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR | \
2420 				 AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR |\
2421 				 AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR | \
2422 				 AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR | \
2423 				 AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR |\
2424 				 AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR)
2425 #define HW_INTERRUT_ASSERT_SET_2 \
2426 				(AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT | \
2427 				 AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT | \
2428 				 AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT | \
2429 			AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT |\
2430 				 AEU_INPUTS_ATTN_BITS_MISC_HW_INTERRUPT)
2431 #define HW_PRTY_ASSERT_SET_2	(AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR | \
2432 				 AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR | \
2433 			AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR |\
2434 				 AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR | \
2435 				 AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR | \
2436 				 AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR |\
2437 				 AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR | \
2438 				 AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR)
2439 
2440 #define HW_PRTY_ASSERT_SET_3_WITHOUT_SCPAD \
2441 		(AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | \
2442 		 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | \
2443 		 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY)
2444 
2445 #define HW_PRTY_ASSERT_SET_3 (HW_PRTY_ASSERT_SET_3_WITHOUT_SCPAD | \
2446 			      AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY)
2447 
2448 #define HW_PRTY_ASSERT_SET_4 (AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR | \
2449 			      AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR)
2450 
2451 #define MULTI_MASK			0x7f
2452 
2453 #define DEF_USB_FUNC_OFF	offsetof(struct cstorm_def_status_block_u, func)
2454 #define DEF_CSB_FUNC_OFF	offsetof(struct cstorm_def_status_block_c, func)
2455 #define DEF_XSB_FUNC_OFF	offsetof(struct xstorm_def_status_block, func)
2456 #define DEF_TSB_FUNC_OFF	offsetof(struct tstorm_def_status_block, func)
2457 
2458 #define DEF_USB_IGU_INDEX_OFF \
2459 			offsetof(struct cstorm_def_status_block_u, igu_index)
2460 #define DEF_CSB_IGU_INDEX_OFF \
2461 			offsetof(struct cstorm_def_status_block_c, igu_index)
2462 #define DEF_XSB_IGU_INDEX_OFF \
2463 			offsetof(struct xstorm_def_status_block, igu_index)
2464 #define DEF_TSB_IGU_INDEX_OFF \
2465 			offsetof(struct tstorm_def_status_block, igu_index)
2466 
2467 #define DEF_USB_SEGMENT_OFF \
2468 			offsetof(struct cstorm_def_status_block_u, segment)
2469 #define DEF_CSB_SEGMENT_OFF \
2470 			offsetof(struct cstorm_def_status_block_c, segment)
2471 #define DEF_XSB_SEGMENT_OFF \
2472 			offsetof(struct xstorm_def_status_block, segment)
2473 #define DEF_TSB_SEGMENT_OFF \
2474 			offsetof(struct tstorm_def_status_block, segment)
2475 
2476 #define BNX2X_SP_DSB_INDEX \
2477 		(&bp->def_status_blk->sp_sb.\
2478 					index_values[HC_SP_INDEX_ETH_DEF_CONS])
2479 
2480 #define CAM_IS_INVALID(x) \
2481 	(GET_FLAG(x.flags, \
2482 	MAC_CONFIGURATION_ENTRY_ACTION_TYPE) == \
2483 	(T_ETH_MAC_COMMAND_INVALIDATE))
2484 
2485 /* Number of u32 elements in MC hash array */
2486 #define MC_HASH_SIZE			8
2487 #define MC_HASH_OFFSET(bp, i)		(BAR_TSTRORM_INTMEM + \
2488 	TSTORM_APPROXIMATE_MATCH_MULTICAST_FILTERING_OFFSET(BP_FUNC(bp)) + i*4)
2489 
2490 #ifndef PXP2_REG_PXP2_INT_STS
2491 #define PXP2_REG_PXP2_INT_STS		PXP2_REG_PXP2_INT_STS_0
2492 #endif
2493 
2494 #ifndef ETH_MAX_RX_CLIENTS_E2
2495 #define ETH_MAX_RX_CLIENTS_E2		ETH_MAX_RX_CLIENTS_E1H
2496 #endif
2497 
2498 #define BNX2X_VPD_LEN			128
2499 #define VENDOR_ID_LEN			4
2500 
2501 #define VF_ACQUIRE_THRESH		3
2502 #define VF_ACQUIRE_MAC_FILTERS		1
2503 #define VF_ACQUIRE_MC_FILTERS		10
2504 #define VF_ACQUIRE_VLAN_FILTERS		2 /* VLAN0 + 'real' VLAN */
2505 
2506 #define GOOD_ME_REG(me_reg) (((me_reg) & ME_REG_VF_VALID) && \
2507 			    (!((me_reg) & ME_REG_VF_ERR)))
2508 int bnx2x_compare_fw_ver(struct bnx2x *bp, u32 load_code, bool print_err);
2509 
2510 /* Congestion management fairness mode */
2511 #define CMNG_FNS_NONE			0
2512 #define CMNG_FNS_MINMAX			1
2513 
2514 #define HC_SEG_ACCESS_DEF		0   /*Driver decision 0-3*/
2515 #define HC_SEG_ACCESS_ATTN		4
2516 #define HC_SEG_ACCESS_NORM		0   /*Driver decision 0-1*/
2517 
2518 static const u32 dmae_reg_go_c[] = {
2519 	DMAE_REG_GO_C0, DMAE_REG_GO_C1, DMAE_REG_GO_C2, DMAE_REG_GO_C3,
2520 	DMAE_REG_GO_C4, DMAE_REG_GO_C5, DMAE_REG_GO_C6, DMAE_REG_GO_C7,
2521 	DMAE_REG_GO_C8, DMAE_REG_GO_C9, DMAE_REG_GO_C10, DMAE_REG_GO_C11,
2522 	DMAE_REG_GO_C12, DMAE_REG_GO_C13, DMAE_REG_GO_C14, DMAE_REG_GO_C15
2523 };
2524 
2525 void bnx2x_set_ethtool_ops(struct bnx2x *bp, struct net_device *netdev);
2526 void bnx2x_notify_link_changed(struct bnx2x *bp);
2527 
2528 #define BNX2X_MF_SD_PROTOCOL(bp) \
2529 	((bp)->mf_config[BP_VN(bp)] & FUNC_MF_CFG_PROTOCOL_MASK)
2530 
2531 #define BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp) \
2532 	(BNX2X_MF_SD_PROTOCOL(bp) == FUNC_MF_CFG_PROTOCOL_ISCSI)
2533 
2534 #define BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp) \
2535 	(BNX2X_MF_SD_PROTOCOL(bp) == FUNC_MF_CFG_PROTOCOL_FCOE)
2536 
2537 #define IS_MF_ISCSI_SD(bp) (IS_MF_SD(bp) && BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp))
2538 #define IS_MF_FCOE_SD(bp) (IS_MF_SD(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp))
2539 #define IS_MF_ISCSI_SI(bp) (IS_MF_SI(bp) && BNX2X_IS_MF_EXT_PROTOCOL_ISCSI(bp))
2540 
2541 #define IS_MF_ISCSI_ONLY(bp)    (IS_MF_ISCSI_SD(bp) ||  IS_MF_ISCSI_SI(bp))
2542 
2543 #define BNX2X_MF_EXT_PROTOCOL_MASK					\
2544 				(MACP_FUNC_CFG_FLAGS_ETHERNET |		\
2545 				 MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD |	\
2546 				 MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD)
2547 
2548 #define BNX2X_MF_EXT_PROT(bp)	((bp)->mf_ext_config &			\
2549 				 BNX2X_MF_EXT_PROTOCOL_MASK)
2550 
2551 #define BNX2X_HAS_MF_EXT_PROTOCOL_FCOE(bp)				\
2552 		(BNX2X_MF_EXT_PROT(bp) & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD)
2553 
2554 #define BNX2X_IS_MF_EXT_PROTOCOL_FCOE(bp)				\
2555 		(BNX2X_MF_EXT_PROT(bp) == MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD)
2556 
2557 #define BNX2X_IS_MF_EXT_PROTOCOL_ISCSI(bp)				\
2558 		(BNX2X_MF_EXT_PROT(bp) == MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD)
2559 
2560 #define IS_MF_FCOE_AFEX(bp)						\
2561 		(IS_MF_AFEX(bp) && BNX2X_IS_MF_EXT_PROTOCOL_FCOE(bp))
2562 
2563 #define IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp)				\
2564 				(IS_MF_SD(bp) &&			\
2565 				 (BNX2X_IS_MF_SD_PROTOCOL_ISCSI(bp) ||	\
2566 				  BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp)))
2567 
2568 #define IS_MF_SI_STORAGE_PERSONALITY_ONLY(bp)				\
2569 				(IS_MF_SI(bp) &&			\
2570 				 (BNX2X_IS_MF_EXT_PROTOCOL_ISCSI(bp) ||	\
2571 				  BNX2X_IS_MF_EXT_PROTOCOL_FCOE(bp)))
2572 
2573 #define IS_MF_STORAGE_PERSONALITY_ONLY(bp)				\
2574 			(IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp) ||	\
2575 			 IS_MF_SI_STORAGE_PERSONALITY_ONLY(bp))
2576 
2577 /* Determines whether BW configuration arrives in 100Mb units or in
2578  * percentages from actual physical link speed.
2579  */
2580 #define IS_MF_PERCENT_BW(bp) (IS_MF_SI(bp) || IS_MF_UFP(bp) || IS_MF_BD(bp))
2581 
2582 #define SET_FLAG(value, mask, flag) \
2583 	do {\
2584 		(value) &= ~(mask);\
2585 		(value) |= ((flag) << (mask##_SHIFT));\
2586 	} while (0)
2587 
2588 #define GET_FLAG(value, mask) \
2589 	(((value) & (mask)) >> (mask##_SHIFT))
2590 
2591 #define GET_FIELD(value, fname) \
2592 	(((value) & (fname##_MASK)) >> (fname##_SHIFT))
2593 
2594 enum {
2595 	SWITCH_UPDATE,
2596 	AFEX_UPDATE,
2597 };
2598 
2599 #define NUM_MACS	8
2600 
2601 void bnx2x_set_local_cmng(struct bnx2x *bp);
2602 
2603 void bnx2x_update_mng_version(struct bnx2x *bp);
2604 
2605 void bnx2x_update_mfw_dump(struct bnx2x *bp);
2606 
2607 #define MCPR_SCRATCH_BASE(bp) \
2608 	(CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH)
2609 
2610 #define E1H_MAX_MF_SB_COUNT (HC_SB_MAX_SB_E1X/(E1HVN_MAX * PORT_MAX))
2611 
2612 void bnx2x_init_ptp(struct bnx2x *bp);
2613 int bnx2x_configure_ptp_filters(struct bnx2x *bp);
2614 void bnx2x_set_rx_ts(struct bnx2x *bp, struct sk_buff *skb);
2615 
2616 #define BNX2X_MAX_PHC_DRIFT 31000000
2617 #define BNX2X_PTP_TX_TIMEOUT
2618 
2619 /* Re-configure all previously configured vlan filters.
2620  * Meant for implicit re-load flows.
2621  */
2622 int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp);
2623 
2624 #endif /* bnx2x.h */
2625