1#
2# Broadcom device configuration
3#
4
5config NET_VENDOR_BROADCOM
6	bool "Broadcom devices"
7	default y
8	depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
9		   SIBYTE_SB1xxx_SOC
10	---help---
11	  If you have a network (Ethernet) chipset belonging to this class,
12	  say Y.
13
14	  Note that the answer to this question does not directly affect
15	  the kernel: saying N will just case the configurator to skip all
16	  the questions regarding AMD chipsets. If you say Y, you will be asked
17	  for your specific chipset/driver in the following questions.
18
19if NET_VENDOR_BROADCOM
20
21config B44
22	tristate "Broadcom 440x/47xx ethernet support"
23	depends on SSB_POSSIBLE && HAS_DMA
24	select SSB
25	select MII
26	select PHYLIB
27	---help---
28	  If you have a network (Ethernet) controller of this type, say Y
29	  or M here.
30
31	  To compile this driver as a module, choose M here. The module
32	  will be called b44.
33
34# Auto-select SSB PCI-HOST support, if possible
35config B44_PCI_AUTOSELECT
36	bool
37	depends on B44 && SSB_PCIHOST_POSSIBLE
38	select SSB_PCIHOST
39	default y
40
41# Auto-select SSB PCICORE driver, if possible
42config B44_PCICORE_AUTOSELECT
43	bool
44	depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
45	select SSB_DRIVER_PCICORE
46	default y
47
48config B44_PCI
49	bool
50	depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
51	default y
52
53config BCM63XX_ENET
54	tristate "Broadcom 63xx internal mac support"
55	depends on BCM63XX
56	select MII
57	select PHYLIB
58	help
59	  This driver supports the ethernet MACs in the Broadcom 63xx
60	  MIPS chipset family (BCM63XX).
61
62config BCMGENET
63	tristate "Broadcom GENET internal MAC support"
64	select MII
65	select PHYLIB
66	select FIXED_PHY
67	select BCM7XXX_PHY
68	help
69	  This driver supports the built-in Ethernet MACs found in the
70	  Broadcom BCM7xxx Set Top Box family chipset.
71
72config BNX2
73	tristate "QLogic bnx2 support"
74	depends on PCI
75	select CRC32
76	select FW_LOADER
77	---help---
78	  This driver supports QLogic bnx2 gigabit Ethernet cards.
79
80	  To compile this driver as a module, choose M here: the module
81	  will be called bnx2.  This is recommended.
82
83config CNIC
84	tristate "QLogic CNIC support"
85	depends on PCI && (IPV6 || IPV6=n)
86	select BNX2
87	select UIO
88	---help---
89	  This driver supports offload features of QLogic bnx2 gigabit
90	  Ethernet cards.
91
92	  To compile this driver as a module, choose M here: the module
93	  will be called cnic.  This is recommended.
94
95config SB1250_MAC
96	tristate "SB1250 Gigabit Ethernet support"
97	depends on SIBYTE_SB1xxx_SOC
98	select PHYLIB
99	---help---
100	  This driver supports Gigabit Ethernet interfaces based on the
101	  Broadcom SiByte family of System-On-a-Chip parts.  They include
102	  the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
103	  and BCM1480 chips.
104
105	  To compile this driver as a module, choose M here: the module
106	  will be called sb1250-mac.
107
108config TIGON3
109	tristate "Broadcom Tigon3 support"
110	depends on PCI
111	select PHYLIB
112	select HWMON
113	imply PTP_1588_CLOCK
114	---help---
115	  This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
116
117	  To compile this driver as a module, choose M here: the module
118	  will be called tg3.  This is recommended.
119
120config BNX2X
121	tristate "Broadcom NetXtremeII 10Gb support"
122	depends on PCI
123	imply PTP_1588_CLOCK
124	select FW_LOADER
125	select ZLIB_INFLATE
126	select LIBCRC32C
127	select MDIO
128	---help---
129	  This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
130	  To compile this driver as a module, choose M here: the module
131	  will be called bnx2x.  This is recommended.
132
133config BNX2X_SRIOV
134	bool "Broadcom 578xx and 57712 SR-IOV support"
135	depends on BNX2X && PCI_IOV
136	default y
137	---help---
138	  This configuration parameter enables Single Root Input Output
139	  Virtualization support in the 578xx and 57712 products. This
140	  allows for virtual function acceleration in virtual environments.
141
142config BGMAC
143	tristate
144	help
145	  This enables the integrated ethernet controller support for many
146	  Broadcom (mostly iProc) SoCs. An appropriate bus interface driver
147	  needs to be enabled to select this.
148
149config BGMAC_BCMA
150	tristate "Broadcom iProc GBit BCMA support"
151	depends on BCMA && BCMA_HOST_SOC
152	depends on HAS_DMA
153	depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
154	select BGMAC
155	select PHYLIB
156	select FIXED_PHY
157	---help---
158	  This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
159	  They can be found on BCM47xx SoCs and provide gigabit ethernet.
160	  In case of using this driver on BCM4706 it's also requires to enable
161	  BCMA_DRIVER_GMAC_CMN to make it work.
162
163config BGMAC_PLATFORM
164	tristate "Broadcom iProc GBit platform support"
165	depends on HAS_DMA
166	depends on ARCH_BCM_IPROC || COMPILE_TEST
167	depends on OF
168	select BGMAC
169	select PHYLIB
170	select FIXED_PHY
171	default ARCH_BCM_IPROC
172	---help---
173	  Say Y here if you want to use the Broadcom iProc Gigabit Ethernet
174	  controller through the generic platform interface
175
176config SYSTEMPORT
177	tristate "Broadcom SYSTEMPORT internal MAC support"
178	depends on OF
179	select MII
180	select PHYLIB
181	select FIXED_PHY
182	help
183	  This driver supports the built-in Ethernet MACs found in the
184	  Broadcom BCM7xxx Set Top Box family chipset using an internal
185	  Ethernet switch.
186
187config BNXT
188	tristate "Broadcom NetXtreme-C/E support"
189	depends on PCI
190	select FW_LOADER
191	select LIBCRC32C
192	---help---
193	  This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit
194	  Ethernet cards.  To compile this driver as a module, choose M here:
195	  the module will be called bnxt_en.  This is recommended.
196
197config BNXT_SRIOV
198	bool "Broadcom NetXtreme-C/E SR-IOV support"
199	depends on BNXT && PCI_IOV
200	default y
201	---help---
202	  This configuration parameter enables Single Root Input Output
203	  Virtualization support in the NetXtreme-C/E products. This
204	  allows for virtual function acceleration in virtual environments.
205
206config BNXT_DCB
207	bool "Data Center Bridging (DCB) Support"
208	default n
209	depends on BNXT && DCB
210	---help---
211	  Say Y here if you want to use Data Center Bridging (DCB) in the
212	  driver.
213
214	  If unsure, say N.
215
216endif # NET_VENDOR_BROADCOM
217