1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Broadcom device configuration
4#
5
6config NET_VENDOR_BROADCOM
7	bool "Broadcom devices"
8	default y
9	depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
10		   SIBYTE_SB1xxx_SOC
11	select DIMLIB
12	---help---
13	  If you have a network (Ethernet) chipset belonging to this class,
14	  say Y.
15
16	  Note that the answer to this question does not directly affect
17	  the kernel: saying N will just case the configurator to skip all
18	  the questions regarding AMD chipsets. If you say Y, you will be asked
19	  for your specific chipset/driver in the following questions.
20
21if NET_VENDOR_BROADCOM
22
23config B44
24	tristate "Broadcom 440x/47xx ethernet support"
25	depends on SSB_POSSIBLE && HAS_DMA
26	select SSB
27	select MII
28	select PHYLIB
29	---help---
30	  If you have a network (Ethernet) controller of this type, say Y
31	  or M here.
32
33	  To compile this driver as a module, choose M here. The module
34	  will be called b44.
35
36# Auto-select SSB PCI-HOST support, if possible
37config B44_PCI_AUTOSELECT
38	bool
39	depends on B44 && SSB_PCIHOST_POSSIBLE
40	select SSB_PCIHOST
41	default y
42
43# Auto-select SSB PCICORE driver, if possible
44config B44_PCICORE_AUTOSELECT
45	bool
46	depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
47	select SSB_DRIVER_PCICORE
48	default y
49
50config B44_PCI
51	bool
52	depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
53	default y
54
55config BCM63XX_ENET
56	tristate "Broadcom 63xx internal mac support"
57	depends on BCM63XX
58	select MII
59	select PHYLIB
60	help
61	  This driver supports the ethernet MACs in the Broadcom 63xx
62	  MIPS chipset family (BCM63XX).
63
64config BCMGENET
65	tristate "Broadcom GENET internal MAC support"
66	depends on HAS_IOMEM
67	select MII
68	select PHYLIB
69	select FIXED_PHY
70	select BCM7XXX_PHY
71	select MDIO_BCM_UNIMAC
72	help
73	  This driver supports the built-in Ethernet MACs found in the
74	  Broadcom BCM7xxx Set Top Box family chipset.
75
76config BNX2
77	tristate "QLogic bnx2 support"
78	depends on PCI
79	select CRC32
80	select FW_LOADER
81	---help---
82	  This driver supports QLogic bnx2 gigabit Ethernet cards.
83
84	  To compile this driver as a module, choose M here: the module
85	  will be called bnx2.  This is recommended.
86
87config CNIC
88	tristate "QLogic CNIC support"
89	depends on PCI && (IPV6 || IPV6=n)
90	select BNX2
91	select UIO
92	---help---
93	  This driver supports offload features of QLogic bnx2 gigabit
94	  Ethernet cards.
95
96	  To compile this driver as a module, choose M here: the module
97	  will be called cnic.  This is recommended.
98
99config SB1250_MAC
100	tristate "SB1250 Gigabit Ethernet support"
101	depends on SIBYTE_SB1xxx_SOC
102	select PHYLIB
103	---help---
104	  This driver supports Gigabit Ethernet interfaces based on the
105	  Broadcom SiByte family of System-On-a-Chip parts.  They include
106	  the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
107	  and BCM1480 chips.
108
109	  To compile this driver as a module, choose M here: the module
110	  will be called sb1250-mac.
111
112config TIGON3
113	tristate "Broadcom Tigon3 support"
114	depends on PCI
115	select PHYLIB
116	imply PTP_1588_CLOCK
117	---help---
118	  This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
119
120	  To compile this driver as a module, choose M here: the module
121	  will be called tg3.  This is recommended.
122
123config TIGON3_HWMON
124	bool "Broadcom Tigon3 HWMON support"
125	default y
126	depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m)
127	---help---
128	  Say Y if you want to expose the thermal sensor on Tigon3 devices.
129
130config BNX2X
131	tristate "Broadcom NetXtremeII 10Gb support"
132	depends on PCI
133	imply PTP_1588_CLOCK
134	select FW_LOADER
135	select ZLIB_INFLATE
136	select LIBCRC32C
137	select MDIO
138	---help---
139	  This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
140	  To compile this driver as a module, choose M here: the module
141	  will be called bnx2x.  This is recommended.
142
143config BNX2X_SRIOV
144	bool "Broadcom 578xx and 57712 SR-IOV support"
145	depends on BNX2X && PCI_IOV
146	default y
147	---help---
148	  This configuration parameter enables Single Root Input Output
149	  Virtualization support in the 578xx and 57712 products. This
150	  allows for virtual function acceleration in virtual environments.
151
152config BGMAC
153	tristate
154	help
155	  This enables the integrated ethernet controller support for many
156	  Broadcom (mostly iProc) SoCs. An appropriate bus interface driver
157	  needs to be enabled to select this.
158
159config BGMAC_BCMA
160	tristate "Broadcom iProc GBit BCMA support"
161	depends on BCMA && BCMA_HOST_SOC
162	depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
163	select BGMAC
164	select PHYLIB
165	select FIXED_PHY
166	---help---
167	  This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
168	  They can be found on BCM47xx SoCs and provide gigabit ethernet.
169	  In case of using this driver on BCM4706 it's also requires to enable
170	  BCMA_DRIVER_GMAC_CMN to make it work.
171
172config BGMAC_PLATFORM
173	tristate "Broadcom iProc GBit platform support"
174	depends on ARCH_BCM_IPROC || COMPILE_TEST
175	depends on OF
176	select BGMAC
177	select PHYLIB
178	select FIXED_PHY
179	default ARCH_BCM_IPROC
180	---help---
181	  Say Y here if you want to use the Broadcom iProc Gigabit Ethernet
182	  controller through the generic platform interface
183
184config SYSTEMPORT
185	tristate "Broadcom SYSTEMPORT internal MAC support"
186	depends on HAS_IOMEM
187	depends on NET_DSA || !NET_DSA
188	select MII
189	select PHYLIB
190	select FIXED_PHY
191	help
192	  This driver supports the built-in Ethernet MACs found in the
193	  Broadcom BCM7xxx Set Top Box family chipset using an internal
194	  Ethernet switch.
195
196config BNXT
197	tristate "Broadcom NetXtreme-C/E support"
198	depends on PCI
199	select FW_LOADER
200	select LIBCRC32C
201	select NET_DEVLINK
202	select PAGE_POOL
203	---help---
204	  This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit
205	  Ethernet cards.  To compile this driver as a module, choose M here:
206	  the module will be called bnxt_en.  This is recommended.
207
208config BNXT_SRIOV
209	bool "Broadcom NetXtreme-C/E SR-IOV support"
210	depends on BNXT && PCI_IOV
211	default y
212	---help---
213	  This configuration parameter enables Single Root Input Output
214	  Virtualization support in the NetXtreme-C/E products. This
215	  allows for virtual function acceleration in virtual environments.
216
217config BNXT_FLOWER_OFFLOAD
218	bool "TC Flower offload support for NetXtreme-C/E"
219	depends on BNXT
220	default y
221	---help---
222	  This configuration parameter enables TC Flower packet classifier
223	  offload for eswitch.  This option enables SR-IOV switchdev eswitch
224	  offload.
225
226config BNXT_DCB
227	bool "Data Center Bridging (DCB) Support"
228	default n
229	depends on BNXT && DCB
230	---help---
231	  Say Y here if you want to use Data Center Bridging (DCB) in the
232	  driver.
233
234	  If unsure, say N.
235
236config BNXT_HWMON
237	bool "Broadcom NetXtreme-C/E HWMON support"
238	default y
239	depends on BNXT && HWMON && !(BNXT=y && HWMON=m)
240	---help---
241	  Say Y if you want to expose the thermal sensor data on NetXtreme-C/E
242	  devices, via the hwmon sysfs interface.
243
244endif # NET_VENDOR_BROADCOM
245