1#
2# Broadcom device configuration
3#
4
5config NET_VENDOR_BROADCOM
6	bool "Broadcom devices"
7	default y
8	depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
9		   SIBYTE_SB1xxx_SOC
10	---help---
11	  If you have a network (Ethernet) chipset belonging to this class,
12	  say Y.
13
14	  Note that the answer to this question does not directly affect
15	  the kernel: saying N will just case the configurator to skip all
16	  the questions regarding AMD chipsets. If you say Y, you will be asked
17	  for your specific chipset/driver in the following questions.
18
19if NET_VENDOR_BROADCOM
20
21config B44
22	tristate "Broadcom 440x/47xx ethernet support"
23	depends on SSB_POSSIBLE && HAS_DMA
24	select SSB
25	select MII
26	select PHYLIB
27	---help---
28	  If you have a network (Ethernet) controller of this type, say Y
29	  or M here.
30
31	  To compile this driver as a module, choose M here. The module
32	  will be called b44.
33
34# Auto-select SSB PCI-HOST support, if possible
35config B44_PCI_AUTOSELECT
36	bool
37	depends on B44 && SSB_PCIHOST_POSSIBLE
38	select SSB_PCIHOST
39	default y
40
41# Auto-select SSB PCICORE driver, if possible
42config B44_PCICORE_AUTOSELECT
43	bool
44	depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
45	select SSB_DRIVER_PCICORE
46	default y
47
48config B44_PCI
49	bool
50	depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
51	default y
52
53config BCM63XX_ENET
54	tristate "Broadcom 63xx internal mac support"
55	depends on BCM63XX
56	select MII
57	select PHYLIB
58	help
59	  This driver supports the ethernet MACs in the Broadcom 63xx
60	  MIPS chipset family (BCM63XX).
61
62config BCMGENET
63	tristate "Broadcom GENET internal MAC support"
64	depends on HAS_IOMEM
65	select MII
66	select PHYLIB
67	select FIXED_PHY
68	select BCM7XXX_PHY
69	select MDIO_BCM_UNIMAC
70	help
71	  This driver supports the built-in Ethernet MACs found in the
72	  Broadcom BCM7xxx Set Top Box family chipset.
73
74config BNX2
75	tristate "QLogic bnx2 support"
76	depends on PCI
77	select CRC32
78	select FW_LOADER
79	---help---
80	  This driver supports QLogic bnx2 gigabit Ethernet cards.
81
82	  To compile this driver as a module, choose M here: the module
83	  will be called bnx2.  This is recommended.
84
85config CNIC
86	tristate "QLogic CNIC support"
87	depends on PCI && (IPV6 || IPV6=n)
88	select BNX2
89	select UIO
90	---help---
91	  This driver supports offload features of QLogic bnx2 gigabit
92	  Ethernet cards.
93
94	  To compile this driver as a module, choose M here: the module
95	  will be called cnic.  This is recommended.
96
97config SB1250_MAC
98	tristate "SB1250 Gigabit Ethernet support"
99	depends on SIBYTE_SB1xxx_SOC
100	select PHYLIB
101	---help---
102	  This driver supports Gigabit Ethernet interfaces based on the
103	  Broadcom SiByte family of System-On-a-Chip parts.  They include
104	  the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
105	  and BCM1480 chips.
106
107	  To compile this driver as a module, choose M here: the module
108	  will be called sb1250-mac.
109
110config TIGON3
111	tristate "Broadcom Tigon3 support"
112	depends on PCI
113	select PHYLIB
114	imply PTP_1588_CLOCK
115	---help---
116	  This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
117
118	  To compile this driver as a module, choose M here: the module
119	  will be called tg3.  This is recommended.
120
121config TIGON3_HWMON
122	bool "Broadcom Tigon3 HWMON support"
123	default y
124	depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m)
125	---help---
126	  Say Y if you want to expose the thermal sensor on Tigon3 devices.
127
128config BNX2X
129	tristate "Broadcom NetXtremeII 10Gb support"
130	depends on PCI
131	imply PTP_1588_CLOCK
132	select FW_LOADER
133	select ZLIB_INFLATE
134	select LIBCRC32C
135	select MDIO
136	---help---
137	  This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
138	  To compile this driver as a module, choose M here: the module
139	  will be called bnx2x.  This is recommended.
140
141config BNX2X_SRIOV
142	bool "Broadcom 578xx and 57712 SR-IOV support"
143	depends on BNX2X && PCI_IOV
144	default y
145	---help---
146	  This configuration parameter enables Single Root Input Output
147	  Virtualization support in the 578xx and 57712 products. This
148	  allows for virtual function acceleration in virtual environments.
149
150config BGMAC
151	tristate
152	help
153	  This enables the integrated ethernet controller support for many
154	  Broadcom (mostly iProc) SoCs. An appropriate bus interface driver
155	  needs to be enabled to select this.
156
157config BGMAC_BCMA
158	tristate "Broadcom iProc GBit BCMA support"
159	depends on BCMA && BCMA_HOST_SOC
160	depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
161	select BGMAC
162	select PHYLIB
163	select FIXED_PHY
164	---help---
165	  This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
166	  They can be found on BCM47xx SoCs and provide gigabit ethernet.
167	  In case of using this driver on BCM4706 it's also requires to enable
168	  BCMA_DRIVER_GMAC_CMN to make it work.
169
170config BGMAC_PLATFORM
171	tristate "Broadcom iProc GBit platform support"
172	depends on ARCH_BCM_IPROC || COMPILE_TEST
173	depends on OF
174	select BGMAC
175	select PHYLIB
176	select FIXED_PHY
177	default ARCH_BCM_IPROC
178	---help---
179	  Say Y here if you want to use the Broadcom iProc Gigabit Ethernet
180	  controller through the generic platform interface
181
182config SYSTEMPORT
183	tristate "Broadcom SYSTEMPORT internal MAC support"
184	depends on HAS_IOMEM
185	depends on NET_DSA || !NET_DSA
186	select MII
187	select PHYLIB
188	select FIXED_PHY
189	help
190	  This driver supports the built-in Ethernet MACs found in the
191	  Broadcom BCM7xxx Set Top Box family chipset using an internal
192	  Ethernet switch.
193
194config BNXT
195	tristate "Broadcom NetXtreme-C/E support"
196	depends on PCI
197	select FW_LOADER
198	select LIBCRC32C
199	select NET_DEVLINK
200	---help---
201	  This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit
202	  Ethernet cards.  To compile this driver as a module, choose M here:
203	  the module will be called bnxt_en.  This is recommended.
204
205config BNXT_SRIOV
206	bool "Broadcom NetXtreme-C/E SR-IOV support"
207	depends on BNXT && PCI_IOV
208	default y
209	---help---
210	  This configuration parameter enables Single Root Input Output
211	  Virtualization support in the NetXtreme-C/E products. This
212	  allows for virtual function acceleration in virtual environments.
213
214config BNXT_FLOWER_OFFLOAD
215	bool "TC Flower offload support for NetXtreme-C/E"
216	depends on BNXT
217	default y
218	---help---
219	  This configuration parameter enables TC Flower packet classifier
220	  offload for eswitch.  This option enables SR-IOV switchdev eswitch
221	  offload.
222
223config BNXT_DCB
224	bool "Data Center Bridging (DCB) Support"
225	default n
226	depends on BNXT && DCB
227	---help---
228	  Say Y here if you want to use Data Center Bridging (DCB) in the
229	  driver.
230
231	  If unsure, say N.
232
233config BNXT_HWMON
234	bool "Broadcom NetXtreme-C/E HWMON support"
235	default y
236	depends on BNXT && HWMON && !(BNXT=y && HWMON=m)
237	---help---
238	  Say Y if you want to expose the thermal sensor data on NetXtreme-C/E
239	  devices, via the hwmon sysfs interface.
240
241endif # NET_VENDOR_BROADCOM
242