1 /* 2 * Copyright(c) 2007 Atheros Corporation. All rights reserved. 3 * 4 * Derived from Intel e1000 driver 5 * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. 6 * 7 * This program is free software; you can redistribute it and/or modify it 8 * under the terms of the GNU General Public License as published by the Free 9 * Software Foundation; either version 2 of the License, or (at your option) 10 * any later version. 11 * 12 * This program is distributed in the hope that it will be useful, but WITHOUT 13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 15 * more details. 16 * 17 * You should have received a copy of the GNU General Public License along with 18 * this program; if not, write to the Free Software Foundation, Inc., 59 19 * Temple Place - Suite 330, Boston, MA 02111-1307, USA. 20 */ 21 #include <linux/pci.h> 22 #include <linux/delay.h> 23 #include <linux/mii.h> 24 #include <linux/crc32.h> 25 26 #include "atl1c.h" 27 28 /* 29 * check_eeprom_exist 30 * return 1 if eeprom exist 31 */ 32 int atl1c_check_eeprom_exist(struct atl1c_hw *hw) 33 { 34 u32 data; 35 36 AT_READ_REG(hw, REG_TWSI_DEBUG, &data); 37 if (data & TWSI_DEBUG_DEV_EXIST) 38 return 1; 39 40 AT_READ_REG(hw, REG_MASTER_CTRL, &data); 41 if (data & MASTER_CTRL_OTP_SEL) 42 return 1; 43 return 0; 44 } 45 46 void atl1c_hw_set_mac_addr(struct atl1c_hw *hw, u8 *mac_addr) 47 { 48 u32 value; 49 /* 50 * 00-0B-6A-F6-00-DC 51 * 0: 6AF600DC 1: 000B 52 * low dword 53 */ 54 value = mac_addr[2] << 24 | 55 mac_addr[3] << 16 | 56 mac_addr[4] << 8 | 57 mac_addr[5]; 58 AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 0, value); 59 /* hight dword */ 60 value = mac_addr[0] << 8 | 61 mac_addr[1]; 62 AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 1, value); 63 } 64 65 /* read mac address from hardware register */ 66 static bool atl1c_read_current_addr(struct atl1c_hw *hw, u8 *eth_addr) 67 { 68 u32 addr[2]; 69 70 AT_READ_REG(hw, REG_MAC_STA_ADDR, &addr[0]); 71 AT_READ_REG(hw, REG_MAC_STA_ADDR + 4, &addr[1]); 72 73 *(u32 *) ð_addr[2] = htonl(addr[0]); 74 *(u16 *) ð_addr[0] = htons((u16)addr[1]); 75 76 return is_valid_ether_addr(eth_addr); 77 } 78 79 /* 80 * atl1c_get_permanent_address 81 * return 0 if get valid mac address, 82 */ 83 static int atl1c_get_permanent_address(struct atl1c_hw *hw) 84 { 85 u32 i; 86 u32 otp_ctrl_data; 87 u32 twsi_ctrl_data; 88 u16 phy_data; 89 bool raise_vol = false; 90 91 /* MAC-address from BIOS is the 1st priority */ 92 if (atl1c_read_current_addr(hw, hw->perm_mac_addr)) 93 return 0; 94 95 /* init */ 96 AT_READ_REG(hw, REG_OTP_CTRL, &otp_ctrl_data); 97 if (atl1c_check_eeprom_exist(hw)) { 98 if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c) { 99 /* Enable OTP CLK */ 100 if (!(otp_ctrl_data & OTP_CTRL_CLK_EN)) { 101 otp_ctrl_data |= OTP_CTRL_CLK_EN; 102 AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data); 103 AT_WRITE_FLUSH(hw); 104 msleep(1); 105 } 106 } 107 /* raise voltage temporally for l2cb */ 108 if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l2c_b2) { 109 atl1c_read_phy_dbg(hw, MIIDBG_ANACTRL, &phy_data); 110 phy_data &= ~ANACTRL_HB_EN; 111 atl1c_write_phy_dbg(hw, MIIDBG_ANACTRL, phy_data); 112 atl1c_read_phy_dbg(hw, MIIDBG_VOLT_CTRL, &phy_data); 113 phy_data |= VOLT_CTRL_SWLOWEST; 114 atl1c_write_phy_dbg(hw, MIIDBG_VOLT_CTRL, phy_data); 115 udelay(20); 116 raise_vol = true; 117 } 118 119 AT_READ_REG(hw, REG_TWSI_CTRL, &twsi_ctrl_data); 120 twsi_ctrl_data |= TWSI_CTRL_SW_LDSTART; 121 AT_WRITE_REG(hw, REG_TWSI_CTRL, twsi_ctrl_data); 122 for (i = 0; i < AT_TWSI_EEPROM_TIMEOUT; i++) { 123 msleep(10); 124 AT_READ_REG(hw, REG_TWSI_CTRL, &twsi_ctrl_data); 125 if ((twsi_ctrl_data & TWSI_CTRL_SW_LDSTART) == 0) 126 break; 127 } 128 if (i >= AT_TWSI_EEPROM_TIMEOUT) 129 return -1; 130 } 131 /* Disable OTP_CLK */ 132 if ((hw->nic_type == athr_l1c || hw->nic_type == athr_l2c)) { 133 otp_ctrl_data &= ~OTP_CTRL_CLK_EN; 134 AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data); 135 msleep(1); 136 } 137 if (raise_vol) { 138 atl1c_read_phy_dbg(hw, MIIDBG_ANACTRL, &phy_data); 139 phy_data |= ANACTRL_HB_EN; 140 atl1c_write_phy_dbg(hw, MIIDBG_ANACTRL, phy_data); 141 atl1c_read_phy_dbg(hw, MIIDBG_VOLT_CTRL, &phy_data); 142 phy_data &= ~VOLT_CTRL_SWLOWEST; 143 atl1c_write_phy_dbg(hw, MIIDBG_VOLT_CTRL, phy_data); 144 udelay(20); 145 } 146 147 if (atl1c_read_current_addr(hw, hw->perm_mac_addr)) 148 return 0; 149 150 return -1; 151 } 152 153 bool atl1c_read_eeprom(struct atl1c_hw *hw, u32 offset, u32 *p_value) 154 { 155 int i; 156 bool ret = false; 157 u32 otp_ctrl_data; 158 u32 control; 159 u32 data; 160 161 if (offset & 3) 162 return ret; /* address do not align */ 163 164 AT_READ_REG(hw, REG_OTP_CTRL, &otp_ctrl_data); 165 if (!(otp_ctrl_data & OTP_CTRL_CLK_EN)) 166 AT_WRITE_REG(hw, REG_OTP_CTRL, 167 (otp_ctrl_data | OTP_CTRL_CLK_EN)); 168 169 AT_WRITE_REG(hw, REG_EEPROM_DATA_LO, 0); 170 control = (offset & EEPROM_CTRL_ADDR_MASK) << EEPROM_CTRL_ADDR_SHIFT; 171 AT_WRITE_REG(hw, REG_EEPROM_CTRL, control); 172 173 for (i = 0; i < 10; i++) { 174 udelay(100); 175 AT_READ_REG(hw, REG_EEPROM_CTRL, &control); 176 if (control & EEPROM_CTRL_RW) 177 break; 178 } 179 if (control & EEPROM_CTRL_RW) { 180 AT_READ_REG(hw, REG_EEPROM_CTRL, &data); 181 AT_READ_REG(hw, REG_EEPROM_DATA_LO, p_value); 182 data = data & 0xFFFF; 183 *p_value = swab32((data << 16) | (*p_value >> 16)); 184 ret = true; 185 } 186 if (!(otp_ctrl_data & OTP_CTRL_CLK_EN)) 187 AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data); 188 189 return ret; 190 } 191 /* 192 * Reads the adapter's MAC address from the EEPROM 193 * 194 * hw - Struct containing variables accessed by shared code 195 */ 196 int atl1c_read_mac_addr(struct atl1c_hw *hw) 197 { 198 int err = 0; 199 200 err = atl1c_get_permanent_address(hw); 201 if (err) 202 eth_random_addr(hw->perm_mac_addr); 203 204 memcpy(hw->mac_addr, hw->perm_mac_addr, sizeof(hw->perm_mac_addr)); 205 return err; 206 } 207 208 /* 209 * atl1c_hash_mc_addr 210 * purpose 211 * set hash value for a multicast address 212 * hash calcu processing : 213 * 1. calcu 32bit CRC for multicast address 214 * 2. reverse crc with MSB to LSB 215 */ 216 u32 atl1c_hash_mc_addr(struct atl1c_hw *hw, u8 *mc_addr) 217 { 218 u32 crc32; 219 u32 value = 0; 220 int i; 221 222 crc32 = ether_crc_le(6, mc_addr); 223 for (i = 0; i < 32; i++) 224 value |= (((crc32 >> i) & 1) << (31 - i)); 225 226 return value; 227 } 228 229 /* 230 * Sets the bit in the multicast table corresponding to the hash value. 231 * hw - Struct containing variables accessed by shared code 232 * hash_value - Multicast address hash value 233 */ 234 void atl1c_hash_set(struct atl1c_hw *hw, u32 hash_value) 235 { 236 u32 hash_bit, hash_reg; 237 u32 mta; 238 239 /* 240 * The HASH Table is a register array of 2 32-bit registers. 241 * It is treated like an array of 64 bits. We want to set 242 * bit BitArray[hash_value]. So we figure out what register 243 * the bit is in, read it, OR in the new bit, then write 244 * back the new value. The register is determined by the 245 * upper bit of the hash value and the bit within that 246 * register are determined by the lower 5 bits of the value. 247 */ 248 hash_reg = (hash_value >> 31) & 0x1; 249 hash_bit = (hash_value >> 26) & 0x1F; 250 251 mta = AT_READ_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg); 252 253 mta |= (1 << hash_bit); 254 255 AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg, mta); 256 } 257 258 /* 259 * wait mdio module be idle 260 * return true: idle 261 * false: still busy 262 */ 263 bool atl1c_wait_mdio_idle(struct atl1c_hw *hw) 264 { 265 u32 val; 266 int i; 267 268 for (i = 0; i < MDIO_MAX_AC_TO; i++) { 269 AT_READ_REG(hw, REG_MDIO_CTRL, &val); 270 if (!(val & (MDIO_CTRL_BUSY | MDIO_CTRL_START))) 271 break; 272 udelay(10); 273 } 274 275 return i != MDIO_MAX_AC_TO; 276 } 277 278 void atl1c_stop_phy_polling(struct atl1c_hw *hw) 279 { 280 if (!(hw->ctrl_flags & ATL1C_FPGA_VERSION)) 281 return; 282 283 AT_WRITE_REG(hw, REG_MDIO_CTRL, 0); 284 atl1c_wait_mdio_idle(hw); 285 } 286 287 void atl1c_start_phy_polling(struct atl1c_hw *hw, u16 clk_sel) 288 { 289 u32 val; 290 291 if (!(hw->ctrl_flags & ATL1C_FPGA_VERSION)) 292 return; 293 294 val = MDIO_CTRL_SPRES_PRMBL | 295 FIELDX(MDIO_CTRL_CLK_SEL, clk_sel) | 296 FIELDX(MDIO_CTRL_REG, 1) | 297 MDIO_CTRL_START | 298 MDIO_CTRL_OP_READ; 299 AT_WRITE_REG(hw, REG_MDIO_CTRL, val); 300 atl1c_wait_mdio_idle(hw); 301 val |= MDIO_CTRL_AP_EN; 302 val &= ~MDIO_CTRL_START; 303 AT_WRITE_REG(hw, REG_MDIO_CTRL, val); 304 udelay(30); 305 } 306 307 308 /* 309 * atl1c_read_phy_core 310 * core function to read register in PHY via MDIO control regsiter. 311 * ext: extension register (see IEEE 802.3) 312 * dev: device address (see IEEE 802.3 DEVAD, PRTAD is fixed to 0) 313 * reg: reg to read 314 */ 315 int atl1c_read_phy_core(struct atl1c_hw *hw, bool ext, u8 dev, 316 u16 reg, u16 *phy_data) 317 { 318 u32 val; 319 u16 clk_sel = MDIO_CTRL_CLK_25_4; 320 321 atl1c_stop_phy_polling(hw); 322 323 *phy_data = 0; 324 325 /* only l2c_b2 & l1d_2 could use slow clock */ 326 if ((hw->nic_type == athr_l2c_b2 || hw->nic_type == athr_l1d_2) && 327 hw->hibernate) 328 clk_sel = MDIO_CTRL_CLK_25_128; 329 if (ext) { 330 val = FIELDX(MDIO_EXTN_DEVAD, dev) | FIELDX(MDIO_EXTN_REG, reg); 331 AT_WRITE_REG(hw, REG_MDIO_EXTN, val); 332 val = MDIO_CTRL_SPRES_PRMBL | 333 FIELDX(MDIO_CTRL_CLK_SEL, clk_sel) | 334 MDIO_CTRL_START | 335 MDIO_CTRL_MODE_EXT | 336 MDIO_CTRL_OP_READ; 337 } else { 338 val = MDIO_CTRL_SPRES_PRMBL | 339 FIELDX(MDIO_CTRL_CLK_SEL, clk_sel) | 340 FIELDX(MDIO_CTRL_REG, reg) | 341 MDIO_CTRL_START | 342 MDIO_CTRL_OP_READ; 343 } 344 AT_WRITE_REG(hw, REG_MDIO_CTRL, val); 345 346 if (!atl1c_wait_mdio_idle(hw)) 347 return -1; 348 349 AT_READ_REG(hw, REG_MDIO_CTRL, &val); 350 *phy_data = (u16)FIELD_GETX(val, MDIO_CTRL_DATA); 351 352 atl1c_start_phy_polling(hw, clk_sel); 353 354 return 0; 355 } 356 357 /* 358 * atl1c_write_phy_core 359 * core function to write to register in PHY via MDIO control register. 360 * ext: extension register (see IEEE 802.3) 361 * dev: device address (see IEEE 802.3 DEVAD, PRTAD is fixed to 0) 362 * reg: reg to write 363 */ 364 int atl1c_write_phy_core(struct atl1c_hw *hw, bool ext, u8 dev, 365 u16 reg, u16 phy_data) 366 { 367 u32 val; 368 u16 clk_sel = MDIO_CTRL_CLK_25_4; 369 370 atl1c_stop_phy_polling(hw); 371 372 373 /* only l2c_b2 & l1d_2 could use slow clock */ 374 if ((hw->nic_type == athr_l2c_b2 || hw->nic_type == athr_l1d_2) && 375 hw->hibernate) 376 clk_sel = MDIO_CTRL_CLK_25_128; 377 378 if (ext) { 379 val = FIELDX(MDIO_EXTN_DEVAD, dev) | FIELDX(MDIO_EXTN_REG, reg); 380 AT_WRITE_REG(hw, REG_MDIO_EXTN, val); 381 val = MDIO_CTRL_SPRES_PRMBL | 382 FIELDX(MDIO_CTRL_CLK_SEL, clk_sel) | 383 FIELDX(MDIO_CTRL_DATA, phy_data) | 384 MDIO_CTRL_START | 385 MDIO_CTRL_MODE_EXT; 386 } else { 387 val = MDIO_CTRL_SPRES_PRMBL | 388 FIELDX(MDIO_CTRL_CLK_SEL, clk_sel) | 389 FIELDX(MDIO_CTRL_DATA, phy_data) | 390 FIELDX(MDIO_CTRL_REG, reg) | 391 MDIO_CTRL_START; 392 } 393 AT_WRITE_REG(hw, REG_MDIO_CTRL, val); 394 395 if (!atl1c_wait_mdio_idle(hw)) 396 return -1; 397 398 atl1c_start_phy_polling(hw, clk_sel); 399 400 return 0; 401 } 402 403 /* 404 * Reads the value from a PHY register 405 * hw - Struct containing variables accessed by shared code 406 * reg_addr - address of the PHY register to read 407 */ 408 int atl1c_read_phy_reg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data) 409 { 410 return atl1c_read_phy_core(hw, false, 0, reg_addr, phy_data); 411 } 412 413 /* 414 * Writes a value to a PHY register 415 * hw - Struct containing variables accessed by shared code 416 * reg_addr - address of the PHY register to write 417 * data - data to write to the PHY 418 */ 419 int atl1c_write_phy_reg(struct atl1c_hw *hw, u32 reg_addr, u16 phy_data) 420 { 421 return atl1c_write_phy_core(hw, false, 0, reg_addr, phy_data); 422 } 423 424 /* read from PHY extension register */ 425 int atl1c_read_phy_ext(struct atl1c_hw *hw, u8 dev_addr, 426 u16 reg_addr, u16 *phy_data) 427 { 428 return atl1c_read_phy_core(hw, true, dev_addr, reg_addr, phy_data); 429 } 430 431 /* write to PHY extension register */ 432 int atl1c_write_phy_ext(struct atl1c_hw *hw, u8 dev_addr, 433 u16 reg_addr, u16 phy_data) 434 { 435 return atl1c_write_phy_core(hw, true, dev_addr, reg_addr, phy_data); 436 } 437 438 int atl1c_read_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data) 439 { 440 int err; 441 442 err = atl1c_write_phy_reg(hw, MII_DBG_ADDR, reg_addr); 443 if (unlikely(err)) 444 return err; 445 else 446 err = atl1c_read_phy_reg(hw, MII_DBG_DATA, phy_data); 447 448 return err; 449 } 450 451 int atl1c_write_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 phy_data) 452 { 453 int err; 454 455 err = atl1c_write_phy_reg(hw, MII_DBG_ADDR, reg_addr); 456 if (unlikely(err)) 457 return err; 458 else 459 err = atl1c_write_phy_reg(hw, MII_DBG_DATA, phy_data); 460 461 return err; 462 } 463 464 /* 465 * Configures PHY autoneg and flow control advertisement settings 466 * 467 * hw - Struct containing variables accessed by shared code 468 */ 469 static int atl1c_phy_setup_adv(struct atl1c_hw *hw) 470 { 471 u16 mii_adv_data = ADVERTISE_DEFAULT_CAP & ~ADVERTISE_ALL; 472 u16 mii_giga_ctrl_data = GIGA_CR_1000T_DEFAULT_CAP & 473 ~GIGA_CR_1000T_SPEED_MASK; 474 475 if (hw->autoneg_advertised & ADVERTISED_10baseT_Half) 476 mii_adv_data |= ADVERTISE_10HALF; 477 if (hw->autoneg_advertised & ADVERTISED_10baseT_Full) 478 mii_adv_data |= ADVERTISE_10FULL; 479 if (hw->autoneg_advertised & ADVERTISED_100baseT_Half) 480 mii_adv_data |= ADVERTISE_100HALF; 481 if (hw->autoneg_advertised & ADVERTISED_100baseT_Full) 482 mii_adv_data |= ADVERTISE_100FULL; 483 484 if (hw->autoneg_advertised & ADVERTISED_Autoneg) 485 mii_adv_data |= ADVERTISE_10HALF | ADVERTISE_10FULL | 486 ADVERTISE_100HALF | ADVERTISE_100FULL; 487 488 if (hw->link_cap_flags & ATL1C_LINK_CAP_1000M) { 489 if (hw->autoneg_advertised & ADVERTISED_1000baseT_Half) 490 mii_giga_ctrl_data |= ADVERTISE_1000HALF; 491 if (hw->autoneg_advertised & ADVERTISED_1000baseT_Full) 492 mii_giga_ctrl_data |= ADVERTISE_1000FULL; 493 if (hw->autoneg_advertised & ADVERTISED_Autoneg) 494 mii_giga_ctrl_data |= ADVERTISE_1000HALF | 495 ADVERTISE_1000FULL; 496 } 497 498 if (atl1c_write_phy_reg(hw, MII_ADVERTISE, mii_adv_data) != 0 || 499 atl1c_write_phy_reg(hw, MII_CTRL1000, mii_giga_ctrl_data) != 0) 500 return -1; 501 return 0; 502 } 503 504 void atl1c_phy_disable(struct atl1c_hw *hw) 505 { 506 atl1c_power_saving(hw, 0); 507 } 508 509 510 int atl1c_phy_reset(struct atl1c_hw *hw) 511 { 512 struct atl1c_adapter *adapter = hw->adapter; 513 struct pci_dev *pdev = adapter->pdev; 514 u16 phy_data; 515 u32 phy_ctrl_data, lpi_ctrl; 516 int err; 517 518 /* reset PHY core */ 519 AT_READ_REG(hw, REG_GPHY_CTRL, &phy_ctrl_data); 520 phy_ctrl_data &= ~(GPHY_CTRL_EXT_RESET | GPHY_CTRL_PHY_IDDQ | 521 GPHY_CTRL_GATE_25M_EN | GPHY_CTRL_PWDOWN_HW | GPHY_CTRL_CLS); 522 phy_ctrl_data |= GPHY_CTRL_SEL_ANA_RST; 523 if (!(hw->ctrl_flags & ATL1C_HIB_DISABLE)) 524 phy_ctrl_data |= (GPHY_CTRL_HIB_EN | GPHY_CTRL_HIB_PULSE); 525 else 526 phy_ctrl_data &= ~(GPHY_CTRL_HIB_EN | GPHY_CTRL_HIB_PULSE); 527 AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data); 528 AT_WRITE_FLUSH(hw); 529 udelay(10); 530 AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data | GPHY_CTRL_EXT_RESET); 531 AT_WRITE_FLUSH(hw); 532 udelay(10 * GPHY_CTRL_EXT_RST_TO); /* delay 800us */ 533 534 /* switch clock */ 535 if (hw->nic_type == athr_l2c_b) { 536 atl1c_read_phy_dbg(hw, MIIDBG_CFGLPSPD, &phy_data); 537 atl1c_write_phy_dbg(hw, MIIDBG_CFGLPSPD, 538 phy_data & ~CFGLPSPD_RSTCNT_CLK125SW); 539 } 540 541 /* tx-half amplitude issue fix */ 542 if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l2c_b2) { 543 atl1c_read_phy_dbg(hw, MIIDBG_CABLE1TH_DET, &phy_data); 544 phy_data |= CABLE1TH_DET_EN; 545 atl1c_write_phy_dbg(hw, MIIDBG_CABLE1TH_DET, phy_data); 546 } 547 548 /* clear bit3 of dbgport 3B to lower voltage */ 549 if (!(hw->ctrl_flags & ATL1C_HIB_DISABLE)) { 550 if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l2c_b2) { 551 atl1c_read_phy_dbg(hw, MIIDBG_VOLT_CTRL, &phy_data); 552 phy_data &= ~VOLT_CTRL_SWLOWEST; 553 atl1c_write_phy_dbg(hw, MIIDBG_VOLT_CTRL, phy_data); 554 } 555 /* power saving config */ 556 phy_data = 557 hw->nic_type == athr_l1d || hw->nic_type == athr_l1d_2 ? 558 L1D_LEGCYPS_DEF : L1C_LEGCYPS_DEF; 559 atl1c_write_phy_dbg(hw, MIIDBG_LEGCYPS, phy_data); 560 /* hib */ 561 atl1c_write_phy_dbg(hw, MIIDBG_SYSMODCTRL, 562 SYSMODCTRL_IECHOADJ_DEF); 563 } else { 564 /* disable pws */ 565 atl1c_read_phy_dbg(hw, MIIDBG_LEGCYPS, &phy_data); 566 atl1c_write_phy_dbg(hw, MIIDBG_LEGCYPS, 567 phy_data & ~LEGCYPS_EN); 568 /* disable hibernate */ 569 atl1c_read_phy_dbg(hw, MIIDBG_HIBNEG, &phy_data); 570 atl1c_write_phy_dbg(hw, MIIDBG_HIBNEG, 571 phy_data & HIBNEG_PSHIB_EN); 572 } 573 /* disable AZ(EEE) by default */ 574 if (hw->nic_type == athr_l1d || hw->nic_type == athr_l1d_2 || 575 hw->nic_type == athr_l2c_b2) { 576 AT_READ_REG(hw, REG_LPI_CTRL, &lpi_ctrl); 577 AT_WRITE_REG(hw, REG_LPI_CTRL, lpi_ctrl & ~LPI_CTRL_EN); 578 atl1c_write_phy_ext(hw, MIIEXT_ANEG, MIIEXT_LOCAL_EEEADV, 0); 579 atl1c_write_phy_ext(hw, MIIEXT_PCS, MIIEXT_CLDCTRL3, 580 L2CB_CLDCTRL3); 581 } 582 583 /* other debug port to set */ 584 atl1c_write_phy_dbg(hw, MIIDBG_ANACTRL, ANACTRL_DEF); 585 atl1c_write_phy_dbg(hw, MIIDBG_SRDSYSMOD, SRDSYSMOD_DEF); 586 atl1c_write_phy_dbg(hw, MIIDBG_TST10BTCFG, TST10BTCFG_DEF); 587 /* UNH-IOL test issue, set bit7 */ 588 atl1c_write_phy_dbg(hw, MIIDBG_TST100BTCFG, 589 TST100BTCFG_DEF | TST100BTCFG_LITCH_EN); 590 591 /* set phy interrupt mask */ 592 phy_data = IER_LINK_UP | IER_LINK_DOWN; 593 err = atl1c_write_phy_reg(hw, MII_IER, phy_data); 594 if (err) { 595 if (netif_msg_hw(adapter)) 596 dev_err(&pdev->dev, 597 "Error enable PHY linkChange Interrupt\n"); 598 return err; 599 } 600 return 0; 601 } 602 603 int atl1c_phy_init(struct atl1c_hw *hw) 604 { 605 struct atl1c_adapter *adapter = hw->adapter; 606 struct pci_dev *pdev = adapter->pdev; 607 int ret_val; 608 u16 mii_bmcr_data = BMCR_RESET; 609 610 if ((atl1c_read_phy_reg(hw, MII_PHYSID1, &hw->phy_id1) != 0) || 611 (atl1c_read_phy_reg(hw, MII_PHYSID2, &hw->phy_id2) != 0)) { 612 dev_err(&pdev->dev, "Error get phy ID\n"); 613 return -1; 614 } 615 switch (hw->media_type) { 616 case MEDIA_TYPE_AUTO_SENSOR: 617 ret_val = atl1c_phy_setup_adv(hw); 618 if (ret_val) { 619 if (netif_msg_link(adapter)) 620 dev_err(&pdev->dev, 621 "Error Setting up Auto-Negotiation\n"); 622 return ret_val; 623 } 624 mii_bmcr_data |= BMCR_ANENABLE | BMCR_ANRESTART; 625 break; 626 case MEDIA_TYPE_100M_FULL: 627 mii_bmcr_data |= BMCR_SPEED100 | BMCR_FULLDPLX; 628 break; 629 case MEDIA_TYPE_100M_HALF: 630 mii_bmcr_data |= BMCR_SPEED100; 631 break; 632 case MEDIA_TYPE_10M_FULL: 633 mii_bmcr_data |= BMCR_FULLDPLX; 634 break; 635 case MEDIA_TYPE_10M_HALF: 636 break; 637 default: 638 if (netif_msg_link(adapter)) 639 dev_err(&pdev->dev, "Wrong Media type %d\n", 640 hw->media_type); 641 return -1; 642 } 643 644 ret_val = atl1c_write_phy_reg(hw, MII_BMCR, mii_bmcr_data); 645 if (ret_val) 646 return ret_val; 647 hw->phy_configured = true; 648 649 return 0; 650 } 651 652 /* 653 * Detects the current speed and duplex settings of the hardware. 654 * 655 * hw - Struct containing variables accessed by shared code 656 * speed - Speed of the connection 657 * duplex - Duplex setting of the connection 658 */ 659 int atl1c_get_speed_and_duplex(struct atl1c_hw *hw, u16 *speed, u16 *duplex) 660 { 661 int err; 662 u16 phy_data; 663 664 /* Read PHY Specific Status Register (17) */ 665 err = atl1c_read_phy_reg(hw, MII_GIGA_PSSR, &phy_data); 666 if (err) 667 return err; 668 669 if (!(phy_data & GIGA_PSSR_SPD_DPLX_RESOLVED)) 670 return -1; 671 672 switch (phy_data & GIGA_PSSR_SPEED) { 673 case GIGA_PSSR_1000MBS: 674 *speed = SPEED_1000; 675 break; 676 case GIGA_PSSR_100MBS: 677 *speed = SPEED_100; 678 break; 679 case GIGA_PSSR_10MBS: 680 *speed = SPEED_10; 681 break; 682 default: 683 return -1; 684 } 685 686 if (phy_data & GIGA_PSSR_DPLX) 687 *duplex = FULL_DUPLEX; 688 else 689 *duplex = HALF_DUPLEX; 690 691 return 0; 692 } 693 694 /* select one link mode to get lower power consumption */ 695 int atl1c_phy_to_ps_link(struct atl1c_hw *hw) 696 { 697 struct atl1c_adapter *adapter = hw->adapter; 698 struct pci_dev *pdev = adapter->pdev; 699 int ret = 0; 700 u16 autoneg_advertised = ADVERTISED_10baseT_Half; 701 u16 save_autoneg_advertised; 702 u16 phy_data; 703 u16 mii_lpa_data; 704 u16 speed = SPEED_0; 705 u16 duplex = FULL_DUPLEX; 706 int i; 707 708 atl1c_read_phy_reg(hw, MII_BMSR, &phy_data); 709 atl1c_read_phy_reg(hw, MII_BMSR, &phy_data); 710 if (phy_data & BMSR_LSTATUS) { 711 atl1c_read_phy_reg(hw, MII_LPA, &mii_lpa_data); 712 if (mii_lpa_data & LPA_10FULL) 713 autoneg_advertised = ADVERTISED_10baseT_Full; 714 else if (mii_lpa_data & LPA_10HALF) 715 autoneg_advertised = ADVERTISED_10baseT_Half; 716 else if (mii_lpa_data & LPA_100HALF) 717 autoneg_advertised = ADVERTISED_100baseT_Half; 718 else if (mii_lpa_data & LPA_100FULL) 719 autoneg_advertised = ADVERTISED_100baseT_Full; 720 721 save_autoneg_advertised = hw->autoneg_advertised; 722 hw->phy_configured = false; 723 hw->autoneg_advertised = autoneg_advertised; 724 if (atl1c_restart_autoneg(hw) != 0) { 725 dev_dbg(&pdev->dev, "phy autoneg failed\n"); 726 ret = -1; 727 } 728 hw->autoneg_advertised = save_autoneg_advertised; 729 730 if (mii_lpa_data) { 731 for (i = 0; i < AT_SUSPEND_LINK_TIMEOUT; i++) { 732 mdelay(100); 733 atl1c_read_phy_reg(hw, MII_BMSR, &phy_data); 734 atl1c_read_phy_reg(hw, MII_BMSR, &phy_data); 735 if (phy_data & BMSR_LSTATUS) { 736 if (atl1c_get_speed_and_duplex(hw, &speed, 737 &duplex) != 0) 738 dev_dbg(&pdev->dev, 739 "get speed and duplex failed\n"); 740 break; 741 } 742 } 743 } 744 } else { 745 speed = SPEED_10; 746 duplex = HALF_DUPLEX; 747 } 748 adapter->link_speed = speed; 749 adapter->link_duplex = duplex; 750 751 return ret; 752 } 753 754 int atl1c_restart_autoneg(struct atl1c_hw *hw) 755 { 756 int err = 0; 757 u16 mii_bmcr_data = BMCR_RESET; 758 759 err = atl1c_phy_setup_adv(hw); 760 if (err) 761 return err; 762 mii_bmcr_data |= BMCR_ANENABLE | BMCR_ANRESTART; 763 764 return atl1c_write_phy_reg(hw, MII_BMCR, mii_bmcr_data); 765 } 766 767 int atl1c_power_saving(struct atl1c_hw *hw, u32 wufc) 768 { 769 struct atl1c_adapter *adapter = hw->adapter; 770 struct pci_dev *pdev = adapter->pdev; 771 u32 master_ctrl, mac_ctrl, phy_ctrl; 772 u32 wol_ctrl, speed; 773 u16 phy_data; 774 775 wol_ctrl = 0; 776 speed = adapter->link_speed == SPEED_1000 ? 777 MAC_CTRL_SPEED_1000 : MAC_CTRL_SPEED_10_100; 778 779 AT_READ_REG(hw, REG_MASTER_CTRL, &master_ctrl); 780 AT_READ_REG(hw, REG_MAC_CTRL, &mac_ctrl); 781 AT_READ_REG(hw, REG_GPHY_CTRL, &phy_ctrl); 782 783 master_ctrl &= ~MASTER_CTRL_CLK_SEL_DIS; 784 mac_ctrl = FIELD_SETX(mac_ctrl, MAC_CTRL_SPEED, speed); 785 mac_ctrl &= ~(MAC_CTRL_DUPLX | MAC_CTRL_RX_EN | MAC_CTRL_TX_EN); 786 if (adapter->link_duplex == FULL_DUPLEX) 787 mac_ctrl |= MAC_CTRL_DUPLX; 788 phy_ctrl &= ~(GPHY_CTRL_EXT_RESET | GPHY_CTRL_CLS); 789 phy_ctrl |= GPHY_CTRL_SEL_ANA_RST | GPHY_CTRL_HIB_PULSE | 790 GPHY_CTRL_HIB_EN; 791 if (!wufc) { /* without WoL */ 792 master_ctrl |= MASTER_CTRL_CLK_SEL_DIS; 793 phy_ctrl |= GPHY_CTRL_PHY_IDDQ | GPHY_CTRL_PWDOWN_HW; 794 AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl); 795 AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl); 796 AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl); 797 AT_WRITE_REG(hw, REG_WOL_CTRL, 0); 798 hw->phy_configured = false; /* re-init PHY when resume */ 799 return 0; 800 } 801 phy_ctrl |= GPHY_CTRL_EXT_RESET; 802 if (wufc & AT_WUFC_MAG) { 803 mac_ctrl |= MAC_CTRL_RX_EN | MAC_CTRL_BC_EN; 804 wol_ctrl |= WOL_MAGIC_EN | WOL_MAGIC_PME_EN; 805 if (hw->nic_type == athr_l2c_b && hw->revision_id == L2CB_V11) 806 wol_ctrl |= WOL_PATTERN_EN | WOL_PATTERN_PME_EN; 807 } 808 if (wufc & AT_WUFC_LNKC) { 809 wol_ctrl |= WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN; 810 if (atl1c_write_phy_reg(hw, MII_IER, IER_LINK_UP) != 0) { 811 dev_dbg(&pdev->dev, "%s: write phy MII_IER failed.\n", 812 atl1c_driver_name); 813 } 814 } 815 /* clear PHY interrupt */ 816 atl1c_read_phy_reg(hw, MII_ISR, &phy_data); 817 818 dev_dbg(&pdev->dev, "%s: suspend MAC=%x,MASTER=%x,PHY=0x%x,WOL=%x\n", 819 atl1c_driver_name, mac_ctrl, master_ctrl, phy_ctrl, wol_ctrl); 820 AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl); 821 AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl); 822 AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl); 823 AT_WRITE_REG(hw, REG_WOL_CTRL, wol_ctrl); 824 825 return 0; 826 } 827 828 829 /* configure phy after Link change Event */ 830 void atl1c_post_phy_linkchg(struct atl1c_hw *hw, u16 link_speed) 831 { 832 u16 phy_val; 833 bool adj_thresh = false; 834 835 if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l2c_b2 || 836 hw->nic_type == athr_l1d || hw->nic_type == athr_l1d_2) 837 adj_thresh = true; 838 839 if (link_speed != SPEED_0) { /* link up */ 840 /* az with brcm, half-amp */ 841 if (hw->nic_type == athr_l1d_2) { 842 atl1c_read_phy_ext(hw, MIIEXT_PCS, MIIEXT_CLDCTRL6, 843 &phy_val); 844 phy_val = FIELD_GETX(phy_val, CLDCTRL6_CAB_LEN); 845 phy_val = phy_val > CLDCTRL6_CAB_LEN_SHORT ? 846 AZ_ANADECT_LONG : AZ_ANADECT_DEF; 847 atl1c_write_phy_dbg(hw, MIIDBG_AZ_ANADECT, phy_val); 848 } 849 /* threshold adjust */ 850 if (adj_thresh && link_speed == SPEED_100 && hw->msi_lnkpatch) { 851 atl1c_write_phy_dbg(hw, MIIDBG_MSE16DB, L1D_MSE16DB_UP); 852 atl1c_write_phy_dbg(hw, MIIDBG_SYSMODCTRL, 853 L1D_SYSMODCTRL_IECHOADJ_DEF); 854 } 855 } else { /* link down */ 856 if (adj_thresh && hw->msi_lnkpatch) { 857 atl1c_write_phy_dbg(hw, MIIDBG_SYSMODCTRL, 858 SYSMODCTRL_IECHOADJ_DEF); 859 atl1c_write_phy_dbg(hw, MIIDBG_MSE16DB, 860 L1D_MSE16DB_DOWN); 861 } 862 } 863 } 864