1 /* 2 * AMD 10Gb Ethernet driver 3 * 4 * This file is available to you under your choice of the following two 5 * licenses: 6 * 7 * License 1: GPLv2 8 * 9 * Copyright (c) 2016 Advanced Micro Devices, Inc. 10 * 11 * This file is free software; you may copy, redistribute and/or modify 12 * it under the terms of the GNU General Public License as published by 13 * the Free Software Foundation, either version 2 of the License, or (at 14 * your option) any later version. 15 * 16 * This file is distributed in the hope that it will be useful, but 17 * WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 19 * General Public License for more details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with this program. If not, see <http://www.gnu.org/licenses/>. 23 * 24 * This file incorporates work covered by the following copyright and 25 * permission notice: 26 * The Synopsys DWC ETHER XGMAC Software Driver and documentation 27 * (hereinafter "Software") is an unsupported proprietary work of Synopsys, 28 * Inc. unless otherwise expressly agreed to in writing between Synopsys 29 * and you. 30 * 31 * The Software IS NOT an item of Licensed Software or Licensed Product 32 * under any End User Software License Agreement or Agreement for Licensed 33 * Product with Synopsys or any supplement thereto. Permission is hereby 34 * granted, free of charge, to any person obtaining a copy of this software 35 * annotated with this license and the Software, to deal in the Software 36 * without restriction, including without limitation the rights to use, 37 * copy, modify, merge, publish, distribute, sublicense, and/or sell copies 38 * of the Software, and to permit persons to whom the Software is furnished 39 * to do so, subject to the following conditions: 40 * 41 * The above copyright notice and this permission notice shall be included 42 * in all copies or substantial portions of the Software. 43 * 44 * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" 45 * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 46 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 47 * PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS 48 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 49 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 50 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 51 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 52 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 53 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 54 * THE POSSIBILITY OF SUCH DAMAGE. 55 * 56 * 57 * License 2: Modified BSD 58 * 59 * Copyright (c) 2016 Advanced Micro Devices, Inc. 60 * All rights reserved. 61 * 62 * Redistribution and use in source and binary forms, with or without 63 * modification, are permitted provided that the following conditions are met: 64 * * Redistributions of source code must retain the above copyright 65 * notice, this list of conditions and the following disclaimer. 66 * * Redistributions in binary form must reproduce the above copyright 67 * notice, this list of conditions and the following disclaimer in the 68 * documentation and/or other materials provided with the distribution. 69 * * Neither the name of Advanced Micro Devices, Inc. nor the 70 * names of its contributors may be used to endorse or promote products 71 * derived from this software without specific prior written permission. 72 * 73 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 74 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 75 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 76 * ARE DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY 77 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 78 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 79 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 80 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 81 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 82 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 83 * 84 * This file incorporates work covered by the following copyright and 85 * permission notice: 86 * The Synopsys DWC ETHER XGMAC Software Driver and documentation 87 * (hereinafter "Software") is an unsupported proprietary work of Synopsys, 88 * Inc. unless otherwise expressly agreed to in writing between Synopsys 89 * and you. 90 * 91 * The Software IS NOT an item of Licensed Software or Licensed Product 92 * under any End User Software License Agreement or Agreement for Licensed 93 * Product with Synopsys or any supplement thereto. Permission is hereby 94 * granted, free of charge, to any person obtaining a copy of this software 95 * annotated with this license and the Software, to deal in the Software 96 * without restriction, including without limitation the rights to use, 97 * copy, modify, merge, publish, distribute, sublicense, and/or sell copies 98 * of the Software, and to permit persons to whom the Software is furnished 99 * to do so, subject to the following conditions: 100 * 101 * The above copyright notice and this permission notice shall be included 102 * in all copies or substantial portions of the Software. 103 * 104 * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" 105 * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 106 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 107 * PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS 108 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 109 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 110 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 111 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 112 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 113 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 114 * THE POSSIBILITY OF SUCH DAMAGE. 115 */ 116 117 #include <linux/module.h> 118 #include <linux/device.h> 119 #include <linux/kmod.h> 120 #include <linux/mdio.h> 121 #include <linux/phy.h> 122 #include <linux/ethtool.h> 123 124 #include "xgbe.h" 125 #include "xgbe-common.h" 126 127 #define XGBE_PHY_PORT_SPEED_100 BIT(1) 128 #define XGBE_PHY_PORT_SPEED_1000 BIT(2) 129 #define XGBE_PHY_PORT_SPEED_2500 BIT(3) 130 #define XGBE_PHY_PORT_SPEED_10000 BIT(4) 131 132 #define XGBE_MUTEX_RELEASE 0x80000000 133 134 #define XGBE_SFP_DIRECT 7 135 136 /* I2C target addresses */ 137 #define XGBE_SFP_SERIAL_ID_ADDRESS 0x50 138 #define XGBE_SFP_DIAG_INFO_ADDRESS 0x51 139 #define XGBE_SFP_PHY_ADDRESS 0x56 140 #define XGBE_GPIO_ADDRESS_PCA9555 0x20 141 142 /* SFP sideband signal indicators */ 143 #define XGBE_GPIO_NO_TX_FAULT BIT(0) 144 #define XGBE_GPIO_NO_RATE_SELECT BIT(1) 145 #define XGBE_GPIO_NO_MOD_ABSENT BIT(2) 146 #define XGBE_GPIO_NO_RX_LOS BIT(3) 147 148 /* Rate-change complete wait/retry count */ 149 #define XGBE_RATECHANGE_COUNT 500 150 151 /* CDR delay values for KR support (in usec) */ 152 #define XGBE_CDR_DELAY_INIT 10000 153 #define XGBE_CDR_DELAY_INC 10000 154 #define XGBE_CDR_DELAY_MAX 100000 155 156 /* RRC frequency during link status check */ 157 #define XGBE_RRC_FREQUENCY 10 158 159 enum xgbe_port_mode { 160 XGBE_PORT_MODE_RSVD = 0, 161 XGBE_PORT_MODE_BACKPLANE, 162 XGBE_PORT_MODE_BACKPLANE_2500, 163 XGBE_PORT_MODE_1000BASE_T, 164 XGBE_PORT_MODE_1000BASE_X, 165 XGBE_PORT_MODE_NBASE_T, 166 XGBE_PORT_MODE_10GBASE_T, 167 XGBE_PORT_MODE_10GBASE_R, 168 XGBE_PORT_MODE_SFP, 169 XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG, 170 XGBE_PORT_MODE_MAX, 171 }; 172 173 enum xgbe_conn_type { 174 XGBE_CONN_TYPE_NONE = 0, 175 XGBE_CONN_TYPE_SFP, 176 XGBE_CONN_TYPE_MDIO, 177 XGBE_CONN_TYPE_RSVD1, 178 XGBE_CONN_TYPE_BACKPLANE, 179 XGBE_CONN_TYPE_MAX, 180 }; 181 182 /* SFP/SFP+ related definitions */ 183 enum xgbe_sfp_comm { 184 XGBE_SFP_COMM_DIRECT = 0, 185 XGBE_SFP_COMM_PCA9545, 186 }; 187 188 enum xgbe_sfp_cable { 189 XGBE_SFP_CABLE_UNKNOWN = 0, 190 XGBE_SFP_CABLE_ACTIVE, 191 XGBE_SFP_CABLE_PASSIVE, 192 }; 193 194 enum xgbe_sfp_base { 195 XGBE_SFP_BASE_UNKNOWN = 0, 196 XGBE_SFP_BASE_1000_T, 197 XGBE_SFP_BASE_1000_SX, 198 XGBE_SFP_BASE_1000_LX, 199 XGBE_SFP_BASE_1000_CX, 200 XGBE_SFP_BASE_10000_SR, 201 XGBE_SFP_BASE_10000_LR, 202 XGBE_SFP_BASE_10000_LRM, 203 XGBE_SFP_BASE_10000_ER, 204 XGBE_SFP_BASE_10000_CR, 205 }; 206 207 enum xgbe_sfp_speed { 208 XGBE_SFP_SPEED_UNKNOWN = 0, 209 XGBE_SFP_SPEED_100_1000, 210 XGBE_SFP_SPEED_1000, 211 XGBE_SFP_SPEED_10000, 212 }; 213 214 /* SFP Serial ID Base ID values relative to an offset of 0 */ 215 #define XGBE_SFP_BASE_ID 0 216 #define XGBE_SFP_ID_SFP 0x03 217 218 #define XGBE_SFP_BASE_EXT_ID 1 219 #define XGBE_SFP_EXT_ID_SFP 0x04 220 221 #define XGBE_SFP_BASE_10GBE_CC 3 222 #define XGBE_SFP_BASE_10GBE_CC_SR BIT(4) 223 #define XGBE_SFP_BASE_10GBE_CC_LR BIT(5) 224 #define XGBE_SFP_BASE_10GBE_CC_LRM BIT(6) 225 #define XGBE_SFP_BASE_10GBE_CC_ER BIT(7) 226 227 #define XGBE_SFP_BASE_1GBE_CC 6 228 #define XGBE_SFP_BASE_1GBE_CC_SX BIT(0) 229 #define XGBE_SFP_BASE_1GBE_CC_LX BIT(1) 230 #define XGBE_SFP_BASE_1GBE_CC_CX BIT(2) 231 #define XGBE_SFP_BASE_1GBE_CC_T BIT(3) 232 233 #define XGBE_SFP_BASE_CABLE 8 234 #define XGBE_SFP_BASE_CABLE_PASSIVE BIT(2) 235 #define XGBE_SFP_BASE_CABLE_ACTIVE BIT(3) 236 237 #define XGBE_SFP_BASE_BR 12 238 #define XGBE_SFP_BASE_BR_1GBE_MIN 0x0a 239 #define XGBE_SFP_BASE_BR_1GBE_MAX 0x0d 240 #define XGBE_SFP_BASE_BR_10GBE_MIN 0x64 241 #define XGBE_SFP_BASE_BR_10GBE_MAX 0x68 242 243 #define XGBE_SFP_BASE_CU_CABLE_LEN 18 244 245 #define XGBE_SFP_BASE_VENDOR_NAME 20 246 #define XGBE_SFP_BASE_VENDOR_NAME_LEN 16 247 #define XGBE_SFP_BASE_VENDOR_PN 40 248 #define XGBE_SFP_BASE_VENDOR_PN_LEN 16 249 #define XGBE_SFP_BASE_VENDOR_REV 56 250 #define XGBE_SFP_BASE_VENDOR_REV_LEN 4 251 252 #define XGBE_SFP_BASE_CC 63 253 254 /* SFP Serial ID Extended ID values relative to an offset of 64 */ 255 #define XGBE_SFP_BASE_VENDOR_SN 4 256 #define XGBE_SFP_BASE_VENDOR_SN_LEN 16 257 258 #define XGBE_SFP_EXTD_OPT1 1 259 #define XGBE_SFP_EXTD_OPT1_RX_LOS BIT(1) 260 #define XGBE_SFP_EXTD_OPT1_TX_FAULT BIT(3) 261 262 #define XGBE_SFP_EXTD_DIAG 28 263 #define XGBE_SFP_EXTD_DIAG_ADDR_CHANGE BIT(2) 264 265 #define XGBE_SFP_EXTD_SFF_8472 30 266 267 #define XGBE_SFP_EXTD_CC 31 268 269 struct xgbe_sfp_eeprom { 270 u8 base[64]; 271 u8 extd[32]; 272 u8 vendor[32]; 273 }; 274 275 #define XGBE_SFP_DIAGS_SUPPORTED(_x) \ 276 ((_x)->extd[XGBE_SFP_EXTD_SFF_8472] && \ 277 !((_x)->extd[XGBE_SFP_EXTD_DIAG] & XGBE_SFP_EXTD_DIAG_ADDR_CHANGE)) 278 279 #define XGBE_SFP_EEPROM_BASE_LEN 256 280 #define XGBE_SFP_EEPROM_DIAG_LEN 256 281 #define XGBE_SFP_EEPROM_MAX (XGBE_SFP_EEPROM_BASE_LEN + \ 282 XGBE_SFP_EEPROM_DIAG_LEN) 283 284 #define XGBE_BEL_FUSE_VENDOR "BEL-FUSE " 285 #define XGBE_BEL_FUSE_PARTNO "1GBT-SFP06 " 286 287 struct xgbe_sfp_ascii { 288 union { 289 char vendor[XGBE_SFP_BASE_VENDOR_NAME_LEN + 1]; 290 char partno[XGBE_SFP_BASE_VENDOR_PN_LEN + 1]; 291 char rev[XGBE_SFP_BASE_VENDOR_REV_LEN + 1]; 292 char serno[XGBE_SFP_BASE_VENDOR_SN_LEN + 1]; 293 } u; 294 }; 295 296 /* MDIO PHY reset types */ 297 enum xgbe_mdio_reset { 298 XGBE_MDIO_RESET_NONE = 0, 299 XGBE_MDIO_RESET_I2C_GPIO, 300 XGBE_MDIO_RESET_INT_GPIO, 301 XGBE_MDIO_RESET_MAX, 302 }; 303 304 /* Re-driver related definitions */ 305 enum xgbe_phy_redrv_if { 306 XGBE_PHY_REDRV_IF_MDIO = 0, 307 XGBE_PHY_REDRV_IF_I2C, 308 XGBE_PHY_REDRV_IF_MAX, 309 }; 310 311 enum xgbe_phy_redrv_model { 312 XGBE_PHY_REDRV_MODEL_4223 = 0, 313 XGBE_PHY_REDRV_MODEL_4227, 314 XGBE_PHY_REDRV_MODEL_MAX, 315 }; 316 317 enum xgbe_phy_redrv_mode { 318 XGBE_PHY_REDRV_MODE_CX = 5, 319 XGBE_PHY_REDRV_MODE_SR = 9, 320 }; 321 322 #define XGBE_PHY_REDRV_MODE_REG 0x12b0 323 324 /* PHY related configuration information */ 325 struct xgbe_phy_data { 326 enum xgbe_port_mode port_mode; 327 328 unsigned int port_id; 329 330 unsigned int port_speeds; 331 332 enum xgbe_conn_type conn_type; 333 334 enum xgbe_mode cur_mode; 335 enum xgbe_mode start_mode; 336 337 unsigned int rrc_count; 338 339 unsigned int mdio_addr; 340 341 /* SFP Support */ 342 enum xgbe_sfp_comm sfp_comm; 343 unsigned int sfp_mux_address; 344 unsigned int sfp_mux_channel; 345 346 unsigned int sfp_gpio_address; 347 unsigned int sfp_gpio_mask; 348 unsigned int sfp_gpio_inputs; 349 unsigned int sfp_gpio_rx_los; 350 unsigned int sfp_gpio_tx_fault; 351 unsigned int sfp_gpio_mod_absent; 352 unsigned int sfp_gpio_rate_select; 353 354 unsigned int sfp_rx_los; 355 unsigned int sfp_tx_fault; 356 unsigned int sfp_mod_absent; 357 unsigned int sfp_changed; 358 unsigned int sfp_phy_avail; 359 unsigned int sfp_cable_len; 360 enum xgbe_sfp_base sfp_base; 361 enum xgbe_sfp_cable sfp_cable; 362 enum xgbe_sfp_speed sfp_speed; 363 struct xgbe_sfp_eeprom sfp_eeprom; 364 365 /* External PHY support */ 366 enum xgbe_mdio_mode phydev_mode; 367 struct mii_bus *mii; 368 struct phy_device *phydev; 369 enum xgbe_mdio_reset mdio_reset; 370 unsigned int mdio_reset_addr; 371 unsigned int mdio_reset_gpio; 372 373 /* Re-driver support */ 374 unsigned int redrv; 375 unsigned int redrv_if; 376 unsigned int redrv_addr; 377 unsigned int redrv_lane; 378 unsigned int redrv_model; 379 380 /* KR AN support */ 381 unsigned int phy_cdr_notrack; 382 unsigned int phy_cdr_delay; 383 }; 384 385 /* I2C, MDIO and GPIO lines are muxed, so only one device at a time */ 386 static DEFINE_MUTEX(xgbe_phy_comm_lock); 387 388 static enum xgbe_an_mode xgbe_phy_an_mode(struct xgbe_prv_data *pdata); 389 390 static int xgbe_phy_i2c_xfer(struct xgbe_prv_data *pdata, 391 struct xgbe_i2c_op *i2c_op) 392 { 393 return pdata->i2c_if.i2c_xfer(pdata, i2c_op); 394 } 395 396 static int xgbe_phy_redrv_write(struct xgbe_prv_data *pdata, unsigned int reg, 397 unsigned int val) 398 { 399 struct xgbe_phy_data *phy_data = pdata->phy_data; 400 struct xgbe_i2c_op i2c_op; 401 __be16 *redrv_val; 402 u8 redrv_data[5], csum; 403 unsigned int i, retry; 404 int ret; 405 406 /* High byte of register contains read/write indicator */ 407 redrv_data[0] = ((reg >> 8) & 0xff) << 1; 408 redrv_data[1] = reg & 0xff; 409 redrv_val = (__be16 *)&redrv_data[2]; 410 *redrv_val = cpu_to_be16(val); 411 412 /* Calculate 1 byte checksum */ 413 csum = 0; 414 for (i = 0; i < 4; i++) { 415 csum += redrv_data[i]; 416 if (redrv_data[i] > csum) 417 csum++; 418 } 419 redrv_data[4] = ~csum; 420 421 retry = 1; 422 again1: 423 i2c_op.cmd = XGBE_I2C_CMD_WRITE; 424 i2c_op.target = phy_data->redrv_addr; 425 i2c_op.len = sizeof(redrv_data); 426 i2c_op.buf = redrv_data; 427 ret = xgbe_phy_i2c_xfer(pdata, &i2c_op); 428 if (ret) { 429 if ((ret == -EAGAIN) && retry--) 430 goto again1; 431 432 return ret; 433 } 434 435 retry = 1; 436 again2: 437 i2c_op.cmd = XGBE_I2C_CMD_READ; 438 i2c_op.target = phy_data->redrv_addr; 439 i2c_op.len = 1; 440 i2c_op.buf = redrv_data; 441 ret = xgbe_phy_i2c_xfer(pdata, &i2c_op); 442 if (ret) { 443 if ((ret == -EAGAIN) && retry--) 444 goto again2; 445 446 return ret; 447 } 448 449 if (redrv_data[0] != 0xff) { 450 netif_dbg(pdata, drv, pdata->netdev, 451 "Redriver write checksum error\n"); 452 ret = -EIO; 453 } 454 455 return ret; 456 } 457 458 static int xgbe_phy_i2c_write(struct xgbe_prv_data *pdata, unsigned int target, 459 void *val, unsigned int val_len) 460 { 461 struct xgbe_i2c_op i2c_op; 462 int retry, ret; 463 464 retry = 1; 465 again: 466 /* Write the specfied register */ 467 i2c_op.cmd = XGBE_I2C_CMD_WRITE; 468 i2c_op.target = target; 469 i2c_op.len = val_len; 470 i2c_op.buf = val; 471 ret = xgbe_phy_i2c_xfer(pdata, &i2c_op); 472 if ((ret == -EAGAIN) && retry--) 473 goto again; 474 475 return ret; 476 } 477 478 static int xgbe_phy_i2c_read(struct xgbe_prv_data *pdata, unsigned int target, 479 void *reg, unsigned int reg_len, 480 void *val, unsigned int val_len) 481 { 482 struct xgbe_i2c_op i2c_op; 483 int retry, ret; 484 485 retry = 1; 486 again1: 487 /* Set the specified register to read */ 488 i2c_op.cmd = XGBE_I2C_CMD_WRITE; 489 i2c_op.target = target; 490 i2c_op.len = reg_len; 491 i2c_op.buf = reg; 492 ret = xgbe_phy_i2c_xfer(pdata, &i2c_op); 493 if (ret) { 494 if ((ret == -EAGAIN) && retry--) 495 goto again1; 496 497 return ret; 498 } 499 500 retry = 1; 501 again2: 502 /* Read the specfied register */ 503 i2c_op.cmd = XGBE_I2C_CMD_READ; 504 i2c_op.target = target; 505 i2c_op.len = val_len; 506 i2c_op.buf = val; 507 ret = xgbe_phy_i2c_xfer(pdata, &i2c_op); 508 if ((ret == -EAGAIN) && retry--) 509 goto again2; 510 511 return ret; 512 } 513 514 static int xgbe_phy_sfp_put_mux(struct xgbe_prv_data *pdata) 515 { 516 struct xgbe_phy_data *phy_data = pdata->phy_data; 517 struct xgbe_i2c_op i2c_op; 518 u8 mux_channel; 519 520 if (phy_data->sfp_comm == XGBE_SFP_COMM_DIRECT) 521 return 0; 522 523 /* Select no mux channels */ 524 mux_channel = 0; 525 i2c_op.cmd = XGBE_I2C_CMD_WRITE; 526 i2c_op.target = phy_data->sfp_mux_address; 527 i2c_op.len = sizeof(mux_channel); 528 i2c_op.buf = &mux_channel; 529 530 return xgbe_phy_i2c_xfer(pdata, &i2c_op); 531 } 532 533 static int xgbe_phy_sfp_get_mux(struct xgbe_prv_data *pdata) 534 { 535 struct xgbe_phy_data *phy_data = pdata->phy_data; 536 struct xgbe_i2c_op i2c_op; 537 u8 mux_channel; 538 539 if (phy_data->sfp_comm == XGBE_SFP_COMM_DIRECT) 540 return 0; 541 542 /* Select desired mux channel */ 543 mux_channel = 1 << phy_data->sfp_mux_channel; 544 i2c_op.cmd = XGBE_I2C_CMD_WRITE; 545 i2c_op.target = phy_data->sfp_mux_address; 546 i2c_op.len = sizeof(mux_channel); 547 i2c_op.buf = &mux_channel; 548 549 return xgbe_phy_i2c_xfer(pdata, &i2c_op); 550 } 551 552 static void xgbe_phy_put_comm_ownership(struct xgbe_prv_data *pdata) 553 { 554 mutex_unlock(&xgbe_phy_comm_lock); 555 } 556 557 static int xgbe_phy_get_comm_ownership(struct xgbe_prv_data *pdata) 558 { 559 struct xgbe_phy_data *phy_data = pdata->phy_data; 560 unsigned long timeout; 561 unsigned int mutex_id; 562 563 /* The I2C and MDIO/GPIO bus is multiplexed between multiple devices, 564 * the driver needs to take the software mutex and then the hardware 565 * mutexes before being able to use the busses. 566 */ 567 mutex_lock(&xgbe_phy_comm_lock); 568 569 /* Clear the mutexes */ 570 XP_IOWRITE(pdata, XP_I2C_MUTEX, XGBE_MUTEX_RELEASE); 571 XP_IOWRITE(pdata, XP_MDIO_MUTEX, XGBE_MUTEX_RELEASE); 572 573 /* Mutex formats are the same for I2C and MDIO/GPIO */ 574 mutex_id = 0; 575 XP_SET_BITS(mutex_id, XP_I2C_MUTEX, ID, phy_data->port_id); 576 XP_SET_BITS(mutex_id, XP_I2C_MUTEX, ACTIVE, 1); 577 578 timeout = jiffies + (5 * HZ); 579 while (time_before(jiffies, timeout)) { 580 /* Must be all zeroes in order to obtain the mutex */ 581 if (XP_IOREAD(pdata, XP_I2C_MUTEX) || 582 XP_IOREAD(pdata, XP_MDIO_MUTEX)) { 583 usleep_range(100, 200); 584 continue; 585 } 586 587 /* Obtain the mutex */ 588 XP_IOWRITE(pdata, XP_I2C_MUTEX, mutex_id); 589 XP_IOWRITE(pdata, XP_MDIO_MUTEX, mutex_id); 590 591 return 0; 592 } 593 594 mutex_unlock(&xgbe_phy_comm_lock); 595 596 netdev_err(pdata->netdev, "unable to obtain hardware mutexes\n"); 597 598 return -ETIMEDOUT; 599 } 600 601 static int xgbe_phy_mdio_mii_write(struct xgbe_prv_data *pdata, int addr, 602 int reg, u16 val) 603 { 604 struct xgbe_phy_data *phy_data = pdata->phy_data; 605 606 if (reg & MII_ADDR_C45) { 607 if (phy_data->phydev_mode != XGBE_MDIO_MODE_CL45) 608 return -ENOTSUPP; 609 } else { 610 if (phy_data->phydev_mode != XGBE_MDIO_MODE_CL22) 611 return -ENOTSUPP; 612 } 613 614 return pdata->hw_if.write_ext_mii_regs(pdata, addr, reg, val); 615 } 616 617 static int xgbe_phy_i2c_mii_write(struct xgbe_prv_data *pdata, int reg, u16 val) 618 { 619 __be16 *mii_val; 620 u8 mii_data[3]; 621 int ret; 622 623 ret = xgbe_phy_sfp_get_mux(pdata); 624 if (ret) 625 return ret; 626 627 mii_data[0] = reg & 0xff; 628 mii_val = (__be16 *)&mii_data[1]; 629 *mii_val = cpu_to_be16(val); 630 631 ret = xgbe_phy_i2c_write(pdata, XGBE_SFP_PHY_ADDRESS, 632 mii_data, sizeof(mii_data)); 633 634 xgbe_phy_sfp_put_mux(pdata); 635 636 return ret; 637 } 638 639 static int xgbe_phy_mii_write(struct mii_bus *mii, int addr, int reg, u16 val) 640 { 641 struct xgbe_prv_data *pdata = mii->priv; 642 struct xgbe_phy_data *phy_data = pdata->phy_data; 643 int ret; 644 645 ret = xgbe_phy_get_comm_ownership(pdata); 646 if (ret) 647 return ret; 648 649 if (phy_data->conn_type == XGBE_CONN_TYPE_SFP) 650 ret = xgbe_phy_i2c_mii_write(pdata, reg, val); 651 else if (phy_data->conn_type & XGBE_CONN_TYPE_MDIO) 652 ret = xgbe_phy_mdio_mii_write(pdata, addr, reg, val); 653 else 654 ret = -ENOTSUPP; 655 656 xgbe_phy_put_comm_ownership(pdata); 657 658 return ret; 659 } 660 661 static int xgbe_phy_mdio_mii_read(struct xgbe_prv_data *pdata, int addr, 662 int reg) 663 { 664 struct xgbe_phy_data *phy_data = pdata->phy_data; 665 666 if (reg & MII_ADDR_C45) { 667 if (phy_data->phydev_mode != XGBE_MDIO_MODE_CL45) 668 return -ENOTSUPP; 669 } else { 670 if (phy_data->phydev_mode != XGBE_MDIO_MODE_CL22) 671 return -ENOTSUPP; 672 } 673 674 return pdata->hw_if.read_ext_mii_regs(pdata, addr, reg); 675 } 676 677 static int xgbe_phy_i2c_mii_read(struct xgbe_prv_data *pdata, int reg) 678 { 679 __be16 mii_val; 680 u8 mii_reg; 681 int ret; 682 683 ret = xgbe_phy_sfp_get_mux(pdata); 684 if (ret) 685 return ret; 686 687 mii_reg = reg; 688 ret = xgbe_phy_i2c_read(pdata, XGBE_SFP_PHY_ADDRESS, 689 &mii_reg, sizeof(mii_reg), 690 &mii_val, sizeof(mii_val)); 691 if (!ret) 692 ret = be16_to_cpu(mii_val); 693 694 xgbe_phy_sfp_put_mux(pdata); 695 696 return ret; 697 } 698 699 static int xgbe_phy_mii_read(struct mii_bus *mii, int addr, int reg) 700 { 701 struct xgbe_prv_data *pdata = mii->priv; 702 struct xgbe_phy_data *phy_data = pdata->phy_data; 703 int ret; 704 705 ret = xgbe_phy_get_comm_ownership(pdata); 706 if (ret) 707 return ret; 708 709 if (phy_data->conn_type == XGBE_CONN_TYPE_SFP) 710 ret = xgbe_phy_i2c_mii_read(pdata, reg); 711 else if (phy_data->conn_type & XGBE_CONN_TYPE_MDIO) 712 ret = xgbe_phy_mdio_mii_read(pdata, addr, reg); 713 else 714 ret = -ENOTSUPP; 715 716 xgbe_phy_put_comm_ownership(pdata); 717 718 return ret; 719 } 720 721 static void xgbe_phy_sfp_phy_settings(struct xgbe_prv_data *pdata) 722 { 723 struct ethtool_link_ksettings *lks = &pdata->phy.lks; 724 struct xgbe_phy_data *phy_data = pdata->phy_data; 725 726 if (!phy_data->sfp_mod_absent && !phy_data->sfp_changed) 727 return; 728 729 XGBE_ZERO_SUP(lks); 730 731 if (phy_data->sfp_mod_absent) { 732 pdata->phy.speed = SPEED_UNKNOWN; 733 pdata->phy.duplex = DUPLEX_UNKNOWN; 734 pdata->phy.autoneg = AUTONEG_ENABLE; 735 pdata->phy.pause_autoneg = AUTONEG_ENABLE; 736 737 XGBE_SET_SUP(lks, Autoneg); 738 XGBE_SET_SUP(lks, Pause); 739 XGBE_SET_SUP(lks, Asym_Pause); 740 XGBE_SET_SUP(lks, TP); 741 XGBE_SET_SUP(lks, FIBRE); 742 743 XGBE_LM_COPY(lks, advertising, lks, supported); 744 745 return; 746 } 747 748 switch (phy_data->sfp_base) { 749 case XGBE_SFP_BASE_1000_T: 750 case XGBE_SFP_BASE_1000_SX: 751 case XGBE_SFP_BASE_1000_LX: 752 case XGBE_SFP_BASE_1000_CX: 753 pdata->phy.speed = SPEED_UNKNOWN; 754 pdata->phy.duplex = DUPLEX_UNKNOWN; 755 pdata->phy.autoneg = AUTONEG_ENABLE; 756 pdata->phy.pause_autoneg = AUTONEG_ENABLE; 757 XGBE_SET_SUP(lks, Autoneg); 758 XGBE_SET_SUP(lks, Pause); 759 XGBE_SET_SUP(lks, Asym_Pause); 760 if (phy_data->sfp_base == XGBE_SFP_BASE_1000_T) { 761 if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_100) 762 XGBE_SET_SUP(lks, 100baseT_Full); 763 if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000) 764 XGBE_SET_SUP(lks, 1000baseT_Full); 765 } else { 766 if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000) 767 XGBE_SET_SUP(lks, 1000baseX_Full); 768 } 769 break; 770 case XGBE_SFP_BASE_10000_SR: 771 case XGBE_SFP_BASE_10000_LR: 772 case XGBE_SFP_BASE_10000_LRM: 773 case XGBE_SFP_BASE_10000_ER: 774 case XGBE_SFP_BASE_10000_CR: 775 pdata->phy.speed = SPEED_10000; 776 pdata->phy.duplex = DUPLEX_FULL; 777 pdata->phy.autoneg = AUTONEG_DISABLE; 778 pdata->phy.pause_autoneg = AUTONEG_DISABLE; 779 if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_10000) { 780 switch (phy_data->sfp_base) { 781 case XGBE_SFP_BASE_10000_SR: 782 XGBE_SET_SUP(lks, 10000baseSR_Full); 783 break; 784 case XGBE_SFP_BASE_10000_LR: 785 XGBE_SET_SUP(lks, 10000baseLR_Full); 786 break; 787 case XGBE_SFP_BASE_10000_LRM: 788 XGBE_SET_SUP(lks, 10000baseLRM_Full); 789 break; 790 case XGBE_SFP_BASE_10000_ER: 791 XGBE_SET_SUP(lks, 10000baseER_Full); 792 break; 793 case XGBE_SFP_BASE_10000_CR: 794 XGBE_SET_SUP(lks, 10000baseCR_Full); 795 break; 796 default: 797 break; 798 } 799 } 800 break; 801 default: 802 pdata->phy.speed = SPEED_UNKNOWN; 803 pdata->phy.duplex = DUPLEX_UNKNOWN; 804 pdata->phy.autoneg = AUTONEG_DISABLE; 805 pdata->phy.pause_autoneg = AUTONEG_DISABLE; 806 break; 807 } 808 809 switch (phy_data->sfp_base) { 810 case XGBE_SFP_BASE_1000_T: 811 case XGBE_SFP_BASE_1000_CX: 812 case XGBE_SFP_BASE_10000_CR: 813 XGBE_SET_SUP(lks, TP); 814 break; 815 default: 816 XGBE_SET_SUP(lks, FIBRE); 817 break; 818 } 819 820 XGBE_LM_COPY(lks, advertising, lks, supported); 821 } 822 823 static bool xgbe_phy_sfp_bit_rate(struct xgbe_sfp_eeprom *sfp_eeprom, 824 enum xgbe_sfp_speed sfp_speed) 825 { 826 u8 *sfp_base, min, max; 827 828 sfp_base = sfp_eeprom->base; 829 830 switch (sfp_speed) { 831 case XGBE_SFP_SPEED_1000: 832 min = XGBE_SFP_BASE_BR_1GBE_MIN; 833 max = XGBE_SFP_BASE_BR_1GBE_MAX; 834 break; 835 case XGBE_SFP_SPEED_10000: 836 min = XGBE_SFP_BASE_BR_10GBE_MIN; 837 max = XGBE_SFP_BASE_BR_10GBE_MAX; 838 break; 839 default: 840 return false; 841 } 842 843 return ((sfp_base[XGBE_SFP_BASE_BR] >= min) && 844 (sfp_base[XGBE_SFP_BASE_BR] <= max)); 845 } 846 847 static void xgbe_phy_free_phy_device(struct xgbe_prv_data *pdata) 848 { 849 struct xgbe_phy_data *phy_data = pdata->phy_data; 850 851 if (phy_data->phydev) { 852 phy_detach(phy_data->phydev); 853 phy_device_remove(phy_data->phydev); 854 phy_device_free(phy_data->phydev); 855 phy_data->phydev = NULL; 856 } 857 } 858 859 static bool xgbe_phy_finisar_phy_quirks(struct xgbe_prv_data *pdata) 860 { 861 __ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, }; 862 struct xgbe_phy_data *phy_data = pdata->phy_data; 863 unsigned int phy_id = phy_data->phydev->phy_id; 864 865 if (phy_data->port_mode != XGBE_PORT_MODE_SFP) 866 return false; 867 868 if ((phy_id & 0xfffffff0) != 0x01ff0cc0) 869 return false; 870 871 /* Enable Base-T AN */ 872 phy_write(phy_data->phydev, 0x16, 0x0001); 873 phy_write(phy_data->phydev, 0x00, 0x9140); 874 phy_write(phy_data->phydev, 0x16, 0x0000); 875 876 /* Enable SGMII at 100Base-T/1000Base-T Full Duplex */ 877 phy_write(phy_data->phydev, 0x1b, 0x9084); 878 phy_write(phy_data->phydev, 0x09, 0x0e00); 879 phy_write(phy_data->phydev, 0x00, 0x8140); 880 phy_write(phy_data->phydev, 0x04, 0x0d01); 881 phy_write(phy_data->phydev, 0x00, 0x9140); 882 883 linkmode_set_bit_array(phy_10_100_features_array, 884 ARRAY_SIZE(phy_10_100_features_array), 885 supported); 886 linkmode_set_bit_array(phy_gbit_features_array, 887 ARRAY_SIZE(phy_gbit_features_array), 888 supported); 889 890 linkmode_copy(phy_data->phydev->supported, supported); 891 892 phy_support_asym_pause(phy_data->phydev); 893 894 netif_dbg(pdata, drv, pdata->netdev, 895 "Finisar PHY quirk in place\n"); 896 897 return true; 898 } 899 900 static bool xgbe_phy_belfuse_phy_quirks(struct xgbe_prv_data *pdata) 901 { 902 __ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, }; 903 struct xgbe_phy_data *phy_data = pdata->phy_data; 904 struct xgbe_sfp_eeprom *sfp_eeprom = &phy_data->sfp_eeprom; 905 unsigned int phy_id = phy_data->phydev->phy_id; 906 int reg; 907 908 if (phy_data->port_mode != XGBE_PORT_MODE_SFP) 909 return false; 910 911 if (memcmp(&sfp_eeprom->base[XGBE_SFP_BASE_VENDOR_NAME], 912 XGBE_BEL_FUSE_VENDOR, XGBE_SFP_BASE_VENDOR_NAME_LEN)) 913 return false; 914 915 /* For Bel-Fuse, use the extra AN flag */ 916 pdata->an_again = 1; 917 918 if (memcmp(&sfp_eeprom->base[XGBE_SFP_BASE_VENDOR_PN], 919 XGBE_BEL_FUSE_PARTNO, XGBE_SFP_BASE_VENDOR_PN_LEN)) 920 return false; 921 922 if ((phy_id & 0xfffffff0) != 0x03625d10) 923 return false; 924 925 /* Reset PHY - wait for self-clearing reset bit to clear */ 926 genphy_soft_reset(phy_data->phydev); 927 928 /* Disable RGMII mode */ 929 phy_write(phy_data->phydev, 0x18, 0x7007); 930 reg = phy_read(phy_data->phydev, 0x18); 931 phy_write(phy_data->phydev, 0x18, reg & ~0x0080); 932 933 /* Enable fiber register bank */ 934 phy_write(phy_data->phydev, 0x1c, 0x7c00); 935 reg = phy_read(phy_data->phydev, 0x1c); 936 reg &= 0x03ff; 937 reg &= ~0x0001; 938 phy_write(phy_data->phydev, 0x1c, 0x8000 | 0x7c00 | reg | 0x0001); 939 940 /* Power down SerDes */ 941 reg = phy_read(phy_data->phydev, 0x00); 942 phy_write(phy_data->phydev, 0x00, reg | 0x00800); 943 944 /* Configure SGMII-to-Copper mode */ 945 phy_write(phy_data->phydev, 0x1c, 0x7c00); 946 reg = phy_read(phy_data->phydev, 0x1c); 947 reg &= 0x03ff; 948 reg &= ~0x0006; 949 phy_write(phy_data->phydev, 0x1c, 0x8000 | 0x7c00 | reg | 0x0004); 950 951 /* Power up SerDes */ 952 reg = phy_read(phy_data->phydev, 0x00); 953 phy_write(phy_data->phydev, 0x00, reg & ~0x00800); 954 955 /* Enable copper register bank */ 956 phy_write(phy_data->phydev, 0x1c, 0x7c00); 957 reg = phy_read(phy_data->phydev, 0x1c); 958 reg &= 0x03ff; 959 reg &= ~0x0001; 960 phy_write(phy_data->phydev, 0x1c, 0x8000 | 0x7c00 | reg); 961 962 /* Power up SerDes */ 963 reg = phy_read(phy_data->phydev, 0x00); 964 phy_write(phy_data->phydev, 0x00, reg & ~0x00800); 965 966 linkmode_set_bit_array(phy_10_100_features_array, 967 ARRAY_SIZE(phy_10_100_features_array), 968 supported); 969 linkmode_set_bit_array(phy_gbit_features_array, 970 ARRAY_SIZE(phy_gbit_features_array), 971 supported); 972 linkmode_copy(phy_data->phydev->supported, supported); 973 phy_support_asym_pause(phy_data->phydev); 974 975 netif_dbg(pdata, drv, pdata->netdev, 976 "BelFuse PHY quirk in place\n"); 977 978 return true; 979 } 980 981 static void xgbe_phy_external_phy_quirks(struct xgbe_prv_data *pdata) 982 { 983 if (xgbe_phy_belfuse_phy_quirks(pdata)) 984 return; 985 986 if (xgbe_phy_finisar_phy_quirks(pdata)) 987 return; 988 } 989 990 static int xgbe_phy_find_phy_device(struct xgbe_prv_data *pdata) 991 { 992 struct ethtool_link_ksettings *lks = &pdata->phy.lks; 993 struct xgbe_phy_data *phy_data = pdata->phy_data; 994 struct phy_device *phydev; 995 int ret; 996 997 /* If we already have a PHY, just return */ 998 if (phy_data->phydev) 999 return 0; 1000 1001 /* Clear the extra AN flag */ 1002 pdata->an_again = 0; 1003 1004 /* Check for the use of an external PHY */ 1005 if (phy_data->phydev_mode == XGBE_MDIO_MODE_NONE) 1006 return 0; 1007 1008 /* For SFP, only use an external PHY if available */ 1009 if ((phy_data->port_mode == XGBE_PORT_MODE_SFP) && 1010 !phy_data->sfp_phy_avail) 1011 return 0; 1012 1013 /* Set the proper MDIO mode for the PHY */ 1014 ret = pdata->hw_if.set_ext_mii_mode(pdata, phy_data->mdio_addr, 1015 phy_data->phydev_mode); 1016 if (ret) { 1017 netdev_err(pdata->netdev, 1018 "mdio port/clause not compatible (%u/%u)\n", 1019 phy_data->mdio_addr, phy_data->phydev_mode); 1020 return ret; 1021 } 1022 1023 /* Create and connect to the PHY device */ 1024 phydev = get_phy_device(phy_data->mii, phy_data->mdio_addr, 1025 (phy_data->phydev_mode == XGBE_MDIO_MODE_CL45)); 1026 if (IS_ERR(phydev)) { 1027 netdev_err(pdata->netdev, "get_phy_device failed\n"); 1028 return -ENODEV; 1029 } 1030 netif_dbg(pdata, drv, pdata->netdev, "external PHY id is %#010x\n", 1031 phydev->phy_id); 1032 1033 /*TODO: If c45, add request_module based on one of the MMD ids? */ 1034 1035 ret = phy_device_register(phydev); 1036 if (ret) { 1037 netdev_err(pdata->netdev, "phy_device_register failed\n"); 1038 phy_device_free(phydev); 1039 return ret; 1040 } 1041 1042 ret = phy_attach_direct(pdata->netdev, phydev, phydev->dev_flags, 1043 PHY_INTERFACE_MODE_SGMII); 1044 if (ret) { 1045 netdev_err(pdata->netdev, "phy_attach_direct failed\n"); 1046 phy_device_remove(phydev); 1047 phy_device_free(phydev); 1048 return ret; 1049 } 1050 phy_data->phydev = phydev; 1051 1052 xgbe_phy_external_phy_quirks(pdata); 1053 1054 linkmode_and(phydev->advertising, phydev->advertising, 1055 lks->link_modes.advertising); 1056 1057 phy_start_aneg(phy_data->phydev); 1058 1059 return 0; 1060 } 1061 1062 static void xgbe_phy_sfp_external_phy(struct xgbe_prv_data *pdata) 1063 { 1064 struct xgbe_phy_data *phy_data = pdata->phy_data; 1065 int ret; 1066 1067 if (!phy_data->sfp_changed) 1068 return; 1069 1070 phy_data->sfp_phy_avail = 0; 1071 1072 if (phy_data->sfp_base != XGBE_SFP_BASE_1000_T) 1073 return; 1074 1075 /* Check access to the PHY by reading CTRL1 */ 1076 ret = xgbe_phy_i2c_mii_read(pdata, MII_BMCR); 1077 if (ret < 0) 1078 return; 1079 1080 /* Successfully accessed the PHY */ 1081 phy_data->sfp_phy_avail = 1; 1082 } 1083 1084 static bool xgbe_phy_check_sfp_rx_los(struct xgbe_phy_data *phy_data) 1085 { 1086 u8 *sfp_extd = phy_data->sfp_eeprom.extd; 1087 1088 if (!(sfp_extd[XGBE_SFP_EXTD_OPT1] & XGBE_SFP_EXTD_OPT1_RX_LOS)) 1089 return false; 1090 1091 if (phy_data->sfp_gpio_mask & XGBE_GPIO_NO_RX_LOS) 1092 return false; 1093 1094 if (phy_data->sfp_gpio_inputs & (1 << phy_data->sfp_gpio_rx_los)) 1095 return true; 1096 1097 return false; 1098 } 1099 1100 static bool xgbe_phy_check_sfp_tx_fault(struct xgbe_phy_data *phy_data) 1101 { 1102 u8 *sfp_extd = phy_data->sfp_eeprom.extd; 1103 1104 if (!(sfp_extd[XGBE_SFP_EXTD_OPT1] & XGBE_SFP_EXTD_OPT1_TX_FAULT)) 1105 return false; 1106 1107 if (phy_data->sfp_gpio_mask & XGBE_GPIO_NO_TX_FAULT) 1108 return false; 1109 1110 if (phy_data->sfp_gpio_inputs & (1 << phy_data->sfp_gpio_tx_fault)) 1111 return true; 1112 1113 return false; 1114 } 1115 1116 static bool xgbe_phy_check_sfp_mod_absent(struct xgbe_phy_data *phy_data) 1117 { 1118 if (phy_data->sfp_gpio_mask & XGBE_GPIO_NO_MOD_ABSENT) 1119 return false; 1120 1121 if (phy_data->sfp_gpio_inputs & (1 << phy_data->sfp_gpio_mod_absent)) 1122 return true; 1123 1124 return false; 1125 } 1126 1127 static void xgbe_phy_sfp_parse_eeprom(struct xgbe_prv_data *pdata) 1128 { 1129 struct xgbe_phy_data *phy_data = pdata->phy_data; 1130 struct xgbe_sfp_eeprom *sfp_eeprom = &phy_data->sfp_eeprom; 1131 u8 *sfp_base; 1132 1133 sfp_base = sfp_eeprom->base; 1134 1135 if (sfp_base[XGBE_SFP_BASE_ID] != XGBE_SFP_ID_SFP) 1136 return; 1137 1138 if (sfp_base[XGBE_SFP_BASE_EXT_ID] != XGBE_SFP_EXT_ID_SFP) 1139 return; 1140 1141 /* Update transceiver signals (eeprom extd/options) */ 1142 phy_data->sfp_tx_fault = xgbe_phy_check_sfp_tx_fault(phy_data); 1143 phy_data->sfp_rx_los = xgbe_phy_check_sfp_rx_los(phy_data); 1144 1145 /* Assume ACTIVE cable unless told it is PASSIVE */ 1146 if (sfp_base[XGBE_SFP_BASE_CABLE] & XGBE_SFP_BASE_CABLE_PASSIVE) { 1147 phy_data->sfp_cable = XGBE_SFP_CABLE_PASSIVE; 1148 phy_data->sfp_cable_len = sfp_base[XGBE_SFP_BASE_CU_CABLE_LEN]; 1149 } else { 1150 phy_data->sfp_cable = XGBE_SFP_CABLE_ACTIVE; 1151 } 1152 1153 /* Determine the type of SFP */ 1154 if (sfp_base[XGBE_SFP_BASE_10GBE_CC] & XGBE_SFP_BASE_10GBE_CC_SR) 1155 phy_data->sfp_base = XGBE_SFP_BASE_10000_SR; 1156 else if (sfp_base[XGBE_SFP_BASE_10GBE_CC] & XGBE_SFP_BASE_10GBE_CC_LR) 1157 phy_data->sfp_base = XGBE_SFP_BASE_10000_LR; 1158 else if (sfp_base[XGBE_SFP_BASE_10GBE_CC] & XGBE_SFP_BASE_10GBE_CC_LRM) 1159 phy_data->sfp_base = XGBE_SFP_BASE_10000_LRM; 1160 else if (sfp_base[XGBE_SFP_BASE_10GBE_CC] & XGBE_SFP_BASE_10GBE_CC_ER) 1161 phy_data->sfp_base = XGBE_SFP_BASE_10000_ER; 1162 else if (sfp_base[XGBE_SFP_BASE_1GBE_CC] & XGBE_SFP_BASE_1GBE_CC_SX) 1163 phy_data->sfp_base = XGBE_SFP_BASE_1000_SX; 1164 else if (sfp_base[XGBE_SFP_BASE_1GBE_CC] & XGBE_SFP_BASE_1GBE_CC_LX) 1165 phy_data->sfp_base = XGBE_SFP_BASE_1000_LX; 1166 else if (sfp_base[XGBE_SFP_BASE_1GBE_CC] & XGBE_SFP_BASE_1GBE_CC_CX) 1167 phy_data->sfp_base = XGBE_SFP_BASE_1000_CX; 1168 else if (sfp_base[XGBE_SFP_BASE_1GBE_CC] & XGBE_SFP_BASE_1GBE_CC_T) 1169 phy_data->sfp_base = XGBE_SFP_BASE_1000_T; 1170 else if ((phy_data->sfp_cable == XGBE_SFP_CABLE_PASSIVE) && 1171 xgbe_phy_sfp_bit_rate(sfp_eeprom, XGBE_SFP_SPEED_10000)) 1172 phy_data->sfp_base = XGBE_SFP_BASE_10000_CR; 1173 1174 switch (phy_data->sfp_base) { 1175 case XGBE_SFP_BASE_1000_T: 1176 phy_data->sfp_speed = XGBE_SFP_SPEED_100_1000; 1177 break; 1178 case XGBE_SFP_BASE_1000_SX: 1179 case XGBE_SFP_BASE_1000_LX: 1180 case XGBE_SFP_BASE_1000_CX: 1181 phy_data->sfp_speed = XGBE_SFP_SPEED_1000; 1182 break; 1183 case XGBE_SFP_BASE_10000_SR: 1184 case XGBE_SFP_BASE_10000_LR: 1185 case XGBE_SFP_BASE_10000_LRM: 1186 case XGBE_SFP_BASE_10000_ER: 1187 case XGBE_SFP_BASE_10000_CR: 1188 phy_data->sfp_speed = XGBE_SFP_SPEED_10000; 1189 break; 1190 default: 1191 break; 1192 } 1193 } 1194 1195 static void xgbe_phy_sfp_eeprom_info(struct xgbe_prv_data *pdata, 1196 struct xgbe_sfp_eeprom *sfp_eeprom) 1197 { 1198 struct xgbe_sfp_ascii sfp_ascii; 1199 char *sfp_data = (char *)&sfp_ascii; 1200 1201 netif_dbg(pdata, drv, pdata->netdev, "SFP detected:\n"); 1202 memcpy(sfp_data, &sfp_eeprom->base[XGBE_SFP_BASE_VENDOR_NAME], 1203 XGBE_SFP_BASE_VENDOR_NAME_LEN); 1204 sfp_data[XGBE_SFP_BASE_VENDOR_NAME_LEN] = '\0'; 1205 netif_dbg(pdata, drv, pdata->netdev, " vendor: %s\n", 1206 sfp_data); 1207 1208 memcpy(sfp_data, &sfp_eeprom->base[XGBE_SFP_BASE_VENDOR_PN], 1209 XGBE_SFP_BASE_VENDOR_PN_LEN); 1210 sfp_data[XGBE_SFP_BASE_VENDOR_PN_LEN] = '\0'; 1211 netif_dbg(pdata, drv, pdata->netdev, " part number: %s\n", 1212 sfp_data); 1213 1214 memcpy(sfp_data, &sfp_eeprom->base[XGBE_SFP_BASE_VENDOR_REV], 1215 XGBE_SFP_BASE_VENDOR_REV_LEN); 1216 sfp_data[XGBE_SFP_BASE_VENDOR_REV_LEN] = '\0'; 1217 netif_dbg(pdata, drv, pdata->netdev, " revision level: %s\n", 1218 sfp_data); 1219 1220 memcpy(sfp_data, &sfp_eeprom->extd[XGBE_SFP_BASE_VENDOR_SN], 1221 XGBE_SFP_BASE_VENDOR_SN_LEN); 1222 sfp_data[XGBE_SFP_BASE_VENDOR_SN_LEN] = '\0'; 1223 netif_dbg(pdata, drv, pdata->netdev, " serial number: %s\n", 1224 sfp_data); 1225 } 1226 1227 static bool xgbe_phy_sfp_verify_eeprom(u8 cc_in, u8 *buf, unsigned int len) 1228 { 1229 u8 cc; 1230 1231 for (cc = 0; len; buf++, len--) 1232 cc += *buf; 1233 1234 return cc == cc_in; 1235 } 1236 1237 static int xgbe_phy_sfp_read_eeprom(struct xgbe_prv_data *pdata) 1238 { 1239 struct xgbe_phy_data *phy_data = pdata->phy_data; 1240 struct xgbe_sfp_eeprom sfp_eeprom; 1241 u8 eeprom_addr; 1242 int ret; 1243 1244 ret = xgbe_phy_sfp_get_mux(pdata); 1245 if (ret) { 1246 dev_err_once(pdata->dev, "%s: I2C error setting SFP MUX\n", 1247 netdev_name(pdata->netdev)); 1248 return ret; 1249 } 1250 1251 /* Read the SFP serial ID eeprom */ 1252 eeprom_addr = 0; 1253 ret = xgbe_phy_i2c_read(pdata, XGBE_SFP_SERIAL_ID_ADDRESS, 1254 &eeprom_addr, sizeof(eeprom_addr), 1255 &sfp_eeprom, sizeof(sfp_eeprom)); 1256 if (ret) { 1257 dev_err_once(pdata->dev, "%s: I2C error reading SFP EEPROM\n", 1258 netdev_name(pdata->netdev)); 1259 goto put; 1260 } 1261 1262 /* Validate the contents read */ 1263 if (!xgbe_phy_sfp_verify_eeprom(sfp_eeprom.base[XGBE_SFP_BASE_CC], 1264 sfp_eeprom.base, 1265 sizeof(sfp_eeprom.base) - 1)) { 1266 ret = -EINVAL; 1267 goto put; 1268 } 1269 1270 if (!xgbe_phy_sfp_verify_eeprom(sfp_eeprom.extd[XGBE_SFP_EXTD_CC], 1271 sfp_eeprom.extd, 1272 sizeof(sfp_eeprom.extd) - 1)) { 1273 ret = -EINVAL; 1274 goto put; 1275 } 1276 1277 /* Check for an added or changed SFP */ 1278 if (memcmp(&phy_data->sfp_eeprom, &sfp_eeprom, sizeof(sfp_eeprom))) { 1279 phy_data->sfp_changed = 1; 1280 1281 if (netif_msg_drv(pdata)) 1282 xgbe_phy_sfp_eeprom_info(pdata, &sfp_eeprom); 1283 1284 memcpy(&phy_data->sfp_eeprom, &sfp_eeprom, sizeof(sfp_eeprom)); 1285 1286 xgbe_phy_free_phy_device(pdata); 1287 } else { 1288 phy_data->sfp_changed = 0; 1289 } 1290 1291 put: 1292 xgbe_phy_sfp_put_mux(pdata); 1293 1294 return ret; 1295 } 1296 1297 static void xgbe_phy_sfp_signals(struct xgbe_prv_data *pdata) 1298 { 1299 struct xgbe_phy_data *phy_data = pdata->phy_data; 1300 u8 gpio_reg, gpio_ports[2]; 1301 int ret; 1302 1303 /* Read the input port registers */ 1304 gpio_reg = 0; 1305 ret = xgbe_phy_i2c_read(pdata, phy_data->sfp_gpio_address, 1306 &gpio_reg, sizeof(gpio_reg), 1307 gpio_ports, sizeof(gpio_ports)); 1308 if (ret) { 1309 dev_err_once(pdata->dev, "%s: I2C error reading SFP GPIOs\n", 1310 netdev_name(pdata->netdev)); 1311 return; 1312 } 1313 1314 phy_data->sfp_gpio_inputs = (gpio_ports[1] << 8) | gpio_ports[0]; 1315 1316 phy_data->sfp_mod_absent = xgbe_phy_check_sfp_mod_absent(phy_data); 1317 } 1318 1319 static void xgbe_phy_sfp_mod_absent(struct xgbe_prv_data *pdata) 1320 { 1321 struct xgbe_phy_data *phy_data = pdata->phy_data; 1322 1323 xgbe_phy_free_phy_device(pdata); 1324 1325 phy_data->sfp_mod_absent = 1; 1326 phy_data->sfp_phy_avail = 0; 1327 memset(&phy_data->sfp_eeprom, 0, sizeof(phy_data->sfp_eeprom)); 1328 } 1329 1330 static void xgbe_phy_sfp_reset(struct xgbe_phy_data *phy_data) 1331 { 1332 phy_data->sfp_rx_los = 0; 1333 phy_data->sfp_tx_fault = 0; 1334 phy_data->sfp_mod_absent = 1; 1335 phy_data->sfp_base = XGBE_SFP_BASE_UNKNOWN; 1336 phy_data->sfp_cable = XGBE_SFP_CABLE_UNKNOWN; 1337 phy_data->sfp_speed = XGBE_SFP_SPEED_UNKNOWN; 1338 } 1339 1340 static void xgbe_phy_sfp_detect(struct xgbe_prv_data *pdata) 1341 { 1342 struct xgbe_phy_data *phy_data = pdata->phy_data; 1343 int ret; 1344 1345 /* Reset the SFP signals and info */ 1346 xgbe_phy_sfp_reset(phy_data); 1347 1348 ret = xgbe_phy_get_comm_ownership(pdata); 1349 if (ret) 1350 return; 1351 1352 /* Read the SFP signals and check for module presence */ 1353 xgbe_phy_sfp_signals(pdata); 1354 if (phy_data->sfp_mod_absent) { 1355 xgbe_phy_sfp_mod_absent(pdata); 1356 goto put; 1357 } 1358 1359 ret = xgbe_phy_sfp_read_eeprom(pdata); 1360 if (ret) { 1361 /* Treat any error as if there isn't an SFP plugged in */ 1362 xgbe_phy_sfp_reset(phy_data); 1363 xgbe_phy_sfp_mod_absent(pdata); 1364 goto put; 1365 } 1366 1367 xgbe_phy_sfp_parse_eeprom(pdata); 1368 1369 xgbe_phy_sfp_external_phy(pdata); 1370 1371 put: 1372 xgbe_phy_sfp_phy_settings(pdata); 1373 1374 xgbe_phy_put_comm_ownership(pdata); 1375 } 1376 1377 static int xgbe_phy_module_eeprom(struct xgbe_prv_data *pdata, 1378 struct ethtool_eeprom *eeprom, u8 *data) 1379 { 1380 struct xgbe_phy_data *phy_data = pdata->phy_data; 1381 u8 eeprom_addr, eeprom_data[XGBE_SFP_EEPROM_MAX]; 1382 struct xgbe_sfp_eeprom *sfp_eeprom; 1383 unsigned int i, j, rem; 1384 int ret; 1385 1386 rem = eeprom->len; 1387 1388 if (!eeprom->len) { 1389 ret = -EINVAL; 1390 goto done; 1391 } 1392 1393 if ((eeprom->offset + eeprom->len) > XGBE_SFP_EEPROM_MAX) { 1394 ret = -EINVAL; 1395 goto done; 1396 } 1397 1398 if (phy_data->port_mode != XGBE_PORT_MODE_SFP) { 1399 ret = -ENXIO; 1400 goto done; 1401 } 1402 1403 if (!netif_running(pdata->netdev)) { 1404 ret = -EIO; 1405 goto done; 1406 } 1407 1408 if (phy_data->sfp_mod_absent) { 1409 ret = -EIO; 1410 goto done; 1411 } 1412 1413 ret = xgbe_phy_get_comm_ownership(pdata); 1414 if (ret) { 1415 ret = -EIO; 1416 goto done; 1417 } 1418 1419 ret = xgbe_phy_sfp_get_mux(pdata); 1420 if (ret) { 1421 netdev_err(pdata->netdev, "I2C error setting SFP MUX\n"); 1422 ret = -EIO; 1423 goto put_own; 1424 } 1425 1426 /* Read the SFP serial ID eeprom */ 1427 eeprom_addr = 0; 1428 ret = xgbe_phy_i2c_read(pdata, XGBE_SFP_SERIAL_ID_ADDRESS, 1429 &eeprom_addr, sizeof(eeprom_addr), 1430 eeprom_data, XGBE_SFP_EEPROM_BASE_LEN); 1431 if (ret) { 1432 netdev_err(pdata->netdev, 1433 "I2C error reading SFP EEPROM\n"); 1434 ret = -EIO; 1435 goto put_mux; 1436 } 1437 1438 sfp_eeprom = (struct xgbe_sfp_eeprom *)eeprom_data; 1439 1440 if (XGBE_SFP_DIAGS_SUPPORTED(sfp_eeprom)) { 1441 /* Read the SFP diagnostic eeprom */ 1442 eeprom_addr = 0; 1443 ret = xgbe_phy_i2c_read(pdata, XGBE_SFP_DIAG_INFO_ADDRESS, 1444 &eeprom_addr, sizeof(eeprom_addr), 1445 eeprom_data + XGBE_SFP_EEPROM_BASE_LEN, 1446 XGBE_SFP_EEPROM_DIAG_LEN); 1447 if (ret) { 1448 netdev_err(pdata->netdev, 1449 "I2C error reading SFP DIAGS\n"); 1450 ret = -EIO; 1451 goto put_mux; 1452 } 1453 } 1454 1455 for (i = 0, j = eeprom->offset; i < eeprom->len; i++, j++) { 1456 if ((j >= XGBE_SFP_EEPROM_BASE_LEN) && 1457 !XGBE_SFP_DIAGS_SUPPORTED(sfp_eeprom)) 1458 break; 1459 1460 data[i] = eeprom_data[j]; 1461 rem--; 1462 } 1463 1464 put_mux: 1465 xgbe_phy_sfp_put_mux(pdata); 1466 1467 put_own: 1468 xgbe_phy_put_comm_ownership(pdata); 1469 1470 done: 1471 eeprom->len -= rem; 1472 1473 return ret; 1474 } 1475 1476 static int xgbe_phy_module_info(struct xgbe_prv_data *pdata, 1477 struct ethtool_modinfo *modinfo) 1478 { 1479 struct xgbe_phy_data *phy_data = pdata->phy_data; 1480 1481 if (phy_data->port_mode != XGBE_PORT_MODE_SFP) 1482 return -ENXIO; 1483 1484 if (!netif_running(pdata->netdev)) 1485 return -EIO; 1486 1487 if (phy_data->sfp_mod_absent) 1488 return -EIO; 1489 1490 if (XGBE_SFP_DIAGS_SUPPORTED(&phy_data->sfp_eeprom)) { 1491 modinfo->type = ETH_MODULE_SFF_8472; 1492 modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN; 1493 } else { 1494 modinfo->type = ETH_MODULE_SFF_8079; 1495 modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN; 1496 } 1497 1498 return 0; 1499 } 1500 1501 static void xgbe_phy_phydev_flowctrl(struct xgbe_prv_data *pdata) 1502 { 1503 struct ethtool_link_ksettings *lks = &pdata->phy.lks; 1504 struct xgbe_phy_data *phy_data = pdata->phy_data; 1505 u16 lcl_adv = 0, rmt_adv = 0; 1506 u8 fc; 1507 1508 pdata->phy.tx_pause = 0; 1509 pdata->phy.rx_pause = 0; 1510 1511 if (!phy_data->phydev) 1512 return; 1513 1514 lcl_adv = linkmode_adv_to_lcl_adv_t(phy_data->phydev->advertising); 1515 1516 if (phy_data->phydev->pause) { 1517 XGBE_SET_LP_ADV(lks, Pause); 1518 rmt_adv |= LPA_PAUSE_CAP; 1519 } 1520 if (phy_data->phydev->asym_pause) { 1521 XGBE_SET_LP_ADV(lks, Asym_Pause); 1522 rmt_adv |= LPA_PAUSE_ASYM; 1523 } 1524 1525 fc = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv); 1526 if (fc & FLOW_CTRL_TX) 1527 pdata->phy.tx_pause = 1; 1528 if (fc & FLOW_CTRL_RX) 1529 pdata->phy.rx_pause = 1; 1530 } 1531 1532 static enum xgbe_mode xgbe_phy_an37_sgmii_outcome(struct xgbe_prv_data *pdata) 1533 { 1534 struct ethtool_link_ksettings *lks = &pdata->phy.lks; 1535 enum xgbe_mode mode; 1536 1537 XGBE_SET_LP_ADV(lks, Autoneg); 1538 XGBE_SET_LP_ADV(lks, TP); 1539 1540 /* Use external PHY to determine flow control */ 1541 if (pdata->phy.pause_autoneg) 1542 xgbe_phy_phydev_flowctrl(pdata); 1543 1544 switch (pdata->an_status & XGBE_SGMII_AN_LINK_SPEED) { 1545 case XGBE_SGMII_AN_LINK_SPEED_100: 1546 if (pdata->an_status & XGBE_SGMII_AN_LINK_DUPLEX) { 1547 XGBE_SET_LP_ADV(lks, 100baseT_Full); 1548 mode = XGBE_MODE_SGMII_100; 1549 } else { 1550 /* Half-duplex not supported */ 1551 XGBE_SET_LP_ADV(lks, 100baseT_Half); 1552 mode = XGBE_MODE_UNKNOWN; 1553 } 1554 break; 1555 case XGBE_SGMII_AN_LINK_SPEED_1000: 1556 if (pdata->an_status & XGBE_SGMII_AN_LINK_DUPLEX) { 1557 XGBE_SET_LP_ADV(lks, 1000baseT_Full); 1558 mode = XGBE_MODE_SGMII_1000; 1559 } else { 1560 /* Half-duplex not supported */ 1561 XGBE_SET_LP_ADV(lks, 1000baseT_Half); 1562 mode = XGBE_MODE_UNKNOWN; 1563 } 1564 break; 1565 default: 1566 mode = XGBE_MODE_UNKNOWN; 1567 } 1568 1569 return mode; 1570 } 1571 1572 static enum xgbe_mode xgbe_phy_an37_outcome(struct xgbe_prv_data *pdata) 1573 { 1574 struct ethtool_link_ksettings *lks = &pdata->phy.lks; 1575 enum xgbe_mode mode; 1576 unsigned int ad_reg, lp_reg; 1577 1578 XGBE_SET_LP_ADV(lks, Autoneg); 1579 XGBE_SET_LP_ADV(lks, FIBRE); 1580 1581 /* Compare Advertisement and Link Partner register */ 1582 ad_reg = XMDIO_READ(pdata, MDIO_MMD_VEND2, MDIO_VEND2_AN_ADVERTISE); 1583 lp_reg = XMDIO_READ(pdata, MDIO_MMD_VEND2, MDIO_VEND2_AN_LP_ABILITY); 1584 if (lp_reg & 0x100) 1585 XGBE_SET_LP_ADV(lks, Pause); 1586 if (lp_reg & 0x80) 1587 XGBE_SET_LP_ADV(lks, Asym_Pause); 1588 1589 if (pdata->phy.pause_autoneg) { 1590 /* Set flow control based on auto-negotiation result */ 1591 pdata->phy.tx_pause = 0; 1592 pdata->phy.rx_pause = 0; 1593 1594 if (ad_reg & lp_reg & 0x100) { 1595 pdata->phy.tx_pause = 1; 1596 pdata->phy.rx_pause = 1; 1597 } else if (ad_reg & lp_reg & 0x80) { 1598 if (ad_reg & 0x100) 1599 pdata->phy.rx_pause = 1; 1600 else if (lp_reg & 0x100) 1601 pdata->phy.tx_pause = 1; 1602 } 1603 } 1604 1605 if (lp_reg & 0x20) 1606 XGBE_SET_LP_ADV(lks, 1000baseX_Full); 1607 1608 /* Half duplex is not supported */ 1609 ad_reg &= lp_reg; 1610 mode = (ad_reg & 0x20) ? XGBE_MODE_X : XGBE_MODE_UNKNOWN; 1611 1612 return mode; 1613 } 1614 1615 static enum xgbe_mode xgbe_phy_an73_redrv_outcome(struct xgbe_prv_data *pdata) 1616 { 1617 struct ethtool_link_ksettings *lks = &pdata->phy.lks; 1618 struct xgbe_phy_data *phy_data = pdata->phy_data; 1619 enum xgbe_mode mode; 1620 unsigned int ad_reg, lp_reg; 1621 1622 XGBE_SET_LP_ADV(lks, Autoneg); 1623 XGBE_SET_LP_ADV(lks, Backplane); 1624 1625 /* Use external PHY to determine flow control */ 1626 if (pdata->phy.pause_autoneg) 1627 xgbe_phy_phydev_flowctrl(pdata); 1628 1629 /* Compare Advertisement and Link Partner register 2 */ 1630 ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 1); 1631 lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA + 1); 1632 if (lp_reg & 0x80) 1633 XGBE_SET_LP_ADV(lks, 10000baseKR_Full); 1634 if (lp_reg & 0x20) 1635 XGBE_SET_LP_ADV(lks, 1000baseKX_Full); 1636 1637 ad_reg &= lp_reg; 1638 if (ad_reg & 0x80) { 1639 switch (phy_data->port_mode) { 1640 case XGBE_PORT_MODE_BACKPLANE: 1641 case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG: 1642 mode = XGBE_MODE_KR; 1643 break; 1644 default: 1645 mode = XGBE_MODE_SFI; 1646 break; 1647 } 1648 } else if (ad_reg & 0x20) { 1649 switch (phy_data->port_mode) { 1650 case XGBE_PORT_MODE_BACKPLANE: 1651 case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG: 1652 mode = XGBE_MODE_KX_1000; 1653 break; 1654 case XGBE_PORT_MODE_1000BASE_X: 1655 mode = XGBE_MODE_X; 1656 break; 1657 case XGBE_PORT_MODE_SFP: 1658 switch (phy_data->sfp_base) { 1659 case XGBE_SFP_BASE_1000_T: 1660 if (phy_data->phydev && 1661 (phy_data->phydev->speed == SPEED_100)) 1662 mode = XGBE_MODE_SGMII_100; 1663 else 1664 mode = XGBE_MODE_SGMII_1000; 1665 break; 1666 case XGBE_SFP_BASE_1000_SX: 1667 case XGBE_SFP_BASE_1000_LX: 1668 case XGBE_SFP_BASE_1000_CX: 1669 default: 1670 mode = XGBE_MODE_X; 1671 break; 1672 } 1673 break; 1674 default: 1675 if (phy_data->phydev && 1676 (phy_data->phydev->speed == SPEED_100)) 1677 mode = XGBE_MODE_SGMII_100; 1678 else 1679 mode = XGBE_MODE_SGMII_1000; 1680 break; 1681 } 1682 } else { 1683 mode = XGBE_MODE_UNKNOWN; 1684 } 1685 1686 /* Compare Advertisement and Link Partner register 3 */ 1687 ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2); 1688 lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA + 2); 1689 if (lp_reg & 0xc000) 1690 XGBE_SET_LP_ADV(lks, 10000baseR_FEC); 1691 1692 return mode; 1693 } 1694 1695 static enum xgbe_mode xgbe_phy_an73_outcome(struct xgbe_prv_data *pdata) 1696 { 1697 struct ethtool_link_ksettings *lks = &pdata->phy.lks; 1698 enum xgbe_mode mode; 1699 unsigned int ad_reg, lp_reg; 1700 1701 XGBE_SET_LP_ADV(lks, Autoneg); 1702 XGBE_SET_LP_ADV(lks, Backplane); 1703 1704 /* Compare Advertisement and Link Partner register 1 */ 1705 ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE); 1706 lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA); 1707 if (lp_reg & 0x400) 1708 XGBE_SET_LP_ADV(lks, Pause); 1709 if (lp_reg & 0x800) 1710 XGBE_SET_LP_ADV(lks, Asym_Pause); 1711 1712 if (pdata->phy.pause_autoneg) { 1713 /* Set flow control based on auto-negotiation result */ 1714 pdata->phy.tx_pause = 0; 1715 pdata->phy.rx_pause = 0; 1716 1717 if (ad_reg & lp_reg & 0x400) { 1718 pdata->phy.tx_pause = 1; 1719 pdata->phy.rx_pause = 1; 1720 } else if (ad_reg & lp_reg & 0x800) { 1721 if (ad_reg & 0x400) 1722 pdata->phy.rx_pause = 1; 1723 else if (lp_reg & 0x400) 1724 pdata->phy.tx_pause = 1; 1725 } 1726 } 1727 1728 /* Compare Advertisement and Link Partner register 2 */ 1729 ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 1); 1730 lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA + 1); 1731 if (lp_reg & 0x80) 1732 XGBE_SET_LP_ADV(lks, 10000baseKR_Full); 1733 if (lp_reg & 0x20) 1734 XGBE_SET_LP_ADV(lks, 1000baseKX_Full); 1735 1736 ad_reg &= lp_reg; 1737 if (ad_reg & 0x80) 1738 mode = XGBE_MODE_KR; 1739 else if (ad_reg & 0x20) 1740 mode = XGBE_MODE_KX_1000; 1741 else 1742 mode = XGBE_MODE_UNKNOWN; 1743 1744 /* Compare Advertisement and Link Partner register 3 */ 1745 ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2); 1746 lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA + 2); 1747 if (lp_reg & 0xc000) 1748 XGBE_SET_LP_ADV(lks, 10000baseR_FEC); 1749 1750 return mode; 1751 } 1752 1753 static enum xgbe_mode xgbe_phy_an_outcome(struct xgbe_prv_data *pdata) 1754 { 1755 switch (pdata->an_mode) { 1756 case XGBE_AN_MODE_CL73: 1757 return xgbe_phy_an73_outcome(pdata); 1758 case XGBE_AN_MODE_CL73_REDRV: 1759 return xgbe_phy_an73_redrv_outcome(pdata); 1760 case XGBE_AN_MODE_CL37: 1761 return xgbe_phy_an37_outcome(pdata); 1762 case XGBE_AN_MODE_CL37_SGMII: 1763 return xgbe_phy_an37_sgmii_outcome(pdata); 1764 default: 1765 return XGBE_MODE_UNKNOWN; 1766 } 1767 } 1768 1769 static void xgbe_phy_an_advertising(struct xgbe_prv_data *pdata, 1770 struct ethtool_link_ksettings *dlks) 1771 { 1772 struct ethtool_link_ksettings *slks = &pdata->phy.lks; 1773 struct xgbe_phy_data *phy_data = pdata->phy_data; 1774 1775 XGBE_LM_COPY(dlks, advertising, slks, advertising); 1776 1777 /* Without a re-driver, just return current advertising */ 1778 if (!phy_data->redrv) 1779 return; 1780 1781 /* With the KR re-driver we need to advertise a single speed */ 1782 XGBE_CLR_ADV(dlks, 1000baseKX_Full); 1783 XGBE_CLR_ADV(dlks, 10000baseKR_Full); 1784 1785 /* Advertise FEC support is present */ 1786 if (pdata->fec_ability & MDIO_PMA_10GBR_FECABLE_ABLE) 1787 XGBE_SET_ADV(dlks, 10000baseR_FEC); 1788 1789 switch (phy_data->port_mode) { 1790 case XGBE_PORT_MODE_BACKPLANE: 1791 case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG: 1792 XGBE_SET_ADV(dlks, 10000baseKR_Full); 1793 break; 1794 case XGBE_PORT_MODE_BACKPLANE_2500: 1795 XGBE_SET_ADV(dlks, 1000baseKX_Full); 1796 break; 1797 case XGBE_PORT_MODE_1000BASE_T: 1798 case XGBE_PORT_MODE_1000BASE_X: 1799 case XGBE_PORT_MODE_NBASE_T: 1800 XGBE_SET_ADV(dlks, 1000baseKX_Full); 1801 break; 1802 case XGBE_PORT_MODE_10GBASE_T: 1803 if (phy_data->phydev && 1804 (phy_data->phydev->speed == SPEED_10000)) 1805 XGBE_SET_ADV(dlks, 10000baseKR_Full); 1806 else 1807 XGBE_SET_ADV(dlks, 1000baseKX_Full); 1808 break; 1809 case XGBE_PORT_MODE_10GBASE_R: 1810 XGBE_SET_ADV(dlks, 10000baseKR_Full); 1811 break; 1812 case XGBE_PORT_MODE_SFP: 1813 switch (phy_data->sfp_base) { 1814 case XGBE_SFP_BASE_1000_T: 1815 case XGBE_SFP_BASE_1000_SX: 1816 case XGBE_SFP_BASE_1000_LX: 1817 case XGBE_SFP_BASE_1000_CX: 1818 XGBE_SET_ADV(dlks, 1000baseKX_Full); 1819 break; 1820 default: 1821 XGBE_SET_ADV(dlks, 10000baseKR_Full); 1822 break; 1823 } 1824 break; 1825 default: 1826 XGBE_SET_ADV(dlks, 10000baseKR_Full); 1827 break; 1828 } 1829 } 1830 1831 static int xgbe_phy_an_config(struct xgbe_prv_data *pdata) 1832 { 1833 struct ethtool_link_ksettings *lks = &pdata->phy.lks; 1834 struct xgbe_phy_data *phy_data = pdata->phy_data; 1835 int ret; 1836 1837 ret = xgbe_phy_find_phy_device(pdata); 1838 if (ret) 1839 return ret; 1840 1841 if (!phy_data->phydev) 1842 return 0; 1843 1844 phy_data->phydev->autoneg = pdata->phy.autoneg; 1845 linkmode_and(phy_data->phydev->advertising, 1846 phy_data->phydev->supported, 1847 lks->link_modes.advertising); 1848 1849 if (pdata->phy.autoneg != AUTONEG_ENABLE) { 1850 phy_data->phydev->speed = pdata->phy.speed; 1851 phy_data->phydev->duplex = pdata->phy.duplex; 1852 } 1853 1854 ret = phy_start_aneg(phy_data->phydev); 1855 1856 return ret; 1857 } 1858 1859 static enum xgbe_an_mode xgbe_phy_an_sfp_mode(struct xgbe_phy_data *phy_data) 1860 { 1861 switch (phy_data->sfp_base) { 1862 case XGBE_SFP_BASE_1000_T: 1863 return XGBE_AN_MODE_CL37_SGMII; 1864 case XGBE_SFP_BASE_1000_SX: 1865 case XGBE_SFP_BASE_1000_LX: 1866 case XGBE_SFP_BASE_1000_CX: 1867 return XGBE_AN_MODE_CL37; 1868 default: 1869 return XGBE_AN_MODE_NONE; 1870 } 1871 } 1872 1873 static enum xgbe_an_mode xgbe_phy_an_mode(struct xgbe_prv_data *pdata) 1874 { 1875 struct xgbe_phy_data *phy_data = pdata->phy_data; 1876 1877 /* A KR re-driver will always require CL73 AN */ 1878 if (phy_data->redrv) 1879 return XGBE_AN_MODE_CL73_REDRV; 1880 1881 switch (phy_data->port_mode) { 1882 case XGBE_PORT_MODE_BACKPLANE: 1883 return XGBE_AN_MODE_CL73; 1884 case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG: 1885 case XGBE_PORT_MODE_BACKPLANE_2500: 1886 return XGBE_AN_MODE_NONE; 1887 case XGBE_PORT_MODE_1000BASE_T: 1888 return XGBE_AN_MODE_CL37_SGMII; 1889 case XGBE_PORT_MODE_1000BASE_X: 1890 return XGBE_AN_MODE_CL37; 1891 case XGBE_PORT_MODE_NBASE_T: 1892 return XGBE_AN_MODE_CL37_SGMII; 1893 case XGBE_PORT_MODE_10GBASE_T: 1894 return XGBE_AN_MODE_CL73; 1895 case XGBE_PORT_MODE_10GBASE_R: 1896 return XGBE_AN_MODE_NONE; 1897 case XGBE_PORT_MODE_SFP: 1898 return xgbe_phy_an_sfp_mode(phy_data); 1899 default: 1900 return XGBE_AN_MODE_NONE; 1901 } 1902 } 1903 1904 static int xgbe_phy_set_redrv_mode_mdio(struct xgbe_prv_data *pdata, 1905 enum xgbe_phy_redrv_mode mode) 1906 { 1907 struct xgbe_phy_data *phy_data = pdata->phy_data; 1908 u16 redrv_reg, redrv_val; 1909 1910 redrv_reg = XGBE_PHY_REDRV_MODE_REG + (phy_data->redrv_lane * 0x1000); 1911 redrv_val = (u16)mode; 1912 1913 return pdata->hw_if.write_ext_mii_regs(pdata, phy_data->redrv_addr, 1914 redrv_reg, redrv_val); 1915 } 1916 1917 static int xgbe_phy_set_redrv_mode_i2c(struct xgbe_prv_data *pdata, 1918 enum xgbe_phy_redrv_mode mode) 1919 { 1920 struct xgbe_phy_data *phy_data = pdata->phy_data; 1921 unsigned int redrv_reg; 1922 int ret; 1923 1924 /* Calculate the register to write */ 1925 redrv_reg = XGBE_PHY_REDRV_MODE_REG + (phy_data->redrv_lane * 0x1000); 1926 1927 ret = xgbe_phy_redrv_write(pdata, redrv_reg, mode); 1928 1929 return ret; 1930 } 1931 1932 static void xgbe_phy_set_redrv_mode(struct xgbe_prv_data *pdata) 1933 { 1934 struct xgbe_phy_data *phy_data = pdata->phy_data; 1935 enum xgbe_phy_redrv_mode mode; 1936 int ret; 1937 1938 if (!phy_data->redrv) 1939 return; 1940 1941 mode = XGBE_PHY_REDRV_MODE_CX; 1942 if ((phy_data->port_mode == XGBE_PORT_MODE_SFP) && 1943 (phy_data->sfp_base != XGBE_SFP_BASE_1000_CX) && 1944 (phy_data->sfp_base != XGBE_SFP_BASE_10000_CR)) 1945 mode = XGBE_PHY_REDRV_MODE_SR; 1946 1947 ret = xgbe_phy_get_comm_ownership(pdata); 1948 if (ret) 1949 return; 1950 1951 if (phy_data->redrv_if) 1952 xgbe_phy_set_redrv_mode_i2c(pdata, mode); 1953 else 1954 xgbe_phy_set_redrv_mode_mdio(pdata, mode); 1955 1956 xgbe_phy_put_comm_ownership(pdata); 1957 } 1958 1959 static void xgbe_phy_rx_reset(struct xgbe_prv_data *pdata) 1960 { 1961 int reg; 1962 1963 reg = XMDIO_READ_BITS(pdata, MDIO_MMD_PCS, MDIO_PCS_DIGITAL_STAT, 1964 XGBE_PCS_PSEQ_STATE_MASK); 1965 if (reg == XGBE_PCS_PSEQ_STATE_POWER_GOOD) { 1966 /* Mailbox command timed out, reset of RX block is required. 1967 * This can be done by asseting the reset bit and wait for 1968 * its compeletion. 1969 */ 1970 XMDIO_WRITE_BITS(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_RX_CTRL1, 1971 XGBE_PMA_RX_RST_0_MASK, XGBE_PMA_RX_RST_0_RESET_ON); 1972 ndelay(20); 1973 XMDIO_WRITE_BITS(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_RX_CTRL1, 1974 XGBE_PMA_RX_RST_0_MASK, XGBE_PMA_RX_RST_0_RESET_OFF); 1975 usleep_range(40, 50); 1976 netif_err(pdata, link, pdata->netdev, "firmware mailbox reset performed\n"); 1977 } 1978 } 1979 1980 static void xgbe_phy_pll_ctrl(struct xgbe_prv_data *pdata, bool enable) 1981 { 1982 XMDIO_WRITE_BITS(pdata, MDIO_MMD_PMAPMD, MDIO_VEND2_PMA_MISC_CTRL0, 1983 XGBE_PMA_PLL_CTRL_MASK, 1984 enable ? XGBE_PMA_PLL_CTRL_ENABLE 1985 : XGBE_PMA_PLL_CTRL_DISABLE); 1986 1987 /* Wait for command to complete */ 1988 usleep_range(100, 200); 1989 } 1990 1991 static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata, 1992 unsigned int cmd, unsigned int sub_cmd) 1993 { 1994 unsigned int s0 = 0; 1995 unsigned int wait; 1996 1997 /* Disable PLL re-initialization during FW command processing */ 1998 xgbe_phy_pll_ctrl(pdata, false); 1999 2000 /* Log if a previous command did not complete */ 2001 if (XP_IOREAD_BITS(pdata, XP_DRIVER_INT_RO, STATUS)) { 2002 netif_dbg(pdata, link, pdata->netdev, 2003 "firmware mailbox not ready for command\n"); 2004 xgbe_phy_rx_reset(pdata); 2005 } 2006 2007 /* Construct the command */ 2008 XP_SET_BITS(s0, XP_DRIVER_SCRATCH_0, COMMAND, cmd); 2009 XP_SET_BITS(s0, XP_DRIVER_SCRATCH_0, SUB_COMMAND, sub_cmd); 2010 2011 /* Issue the command */ 2012 XP_IOWRITE(pdata, XP_DRIVER_SCRATCH_0, s0); 2013 XP_IOWRITE(pdata, XP_DRIVER_SCRATCH_1, 0); 2014 XP_IOWRITE_BITS(pdata, XP_DRIVER_INT_REQ, REQUEST, 1); 2015 2016 /* Wait for command to complete */ 2017 wait = XGBE_RATECHANGE_COUNT; 2018 while (wait--) { 2019 if (!XP_IOREAD_BITS(pdata, XP_DRIVER_INT_RO, STATUS)) 2020 goto reenable_pll; 2021 2022 usleep_range(1000, 2000); 2023 } 2024 2025 netif_dbg(pdata, link, pdata->netdev, 2026 "firmware mailbox command did not complete\n"); 2027 2028 /* Reset on error */ 2029 xgbe_phy_rx_reset(pdata); 2030 2031 reenable_pll: 2032 /* Enable PLL re-initialization */ 2033 xgbe_phy_pll_ctrl(pdata, true); 2034 } 2035 2036 static void xgbe_phy_rrc(struct xgbe_prv_data *pdata) 2037 { 2038 /* Receiver Reset Cycle */ 2039 xgbe_phy_perform_ratechange(pdata, 5, 0); 2040 2041 netif_dbg(pdata, link, pdata->netdev, "receiver reset complete\n"); 2042 } 2043 2044 static void xgbe_phy_power_off(struct xgbe_prv_data *pdata) 2045 { 2046 struct xgbe_phy_data *phy_data = pdata->phy_data; 2047 2048 /* Power off */ 2049 xgbe_phy_perform_ratechange(pdata, 0, 0); 2050 2051 phy_data->cur_mode = XGBE_MODE_UNKNOWN; 2052 2053 netif_dbg(pdata, link, pdata->netdev, "phy powered off\n"); 2054 } 2055 2056 static void xgbe_phy_sfi_mode(struct xgbe_prv_data *pdata) 2057 { 2058 struct xgbe_phy_data *phy_data = pdata->phy_data; 2059 2060 xgbe_phy_set_redrv_mode(pdata); 2061 2062 /* 10G/SFI */ 2063 if (phy_data->sfp_cable != XGBE_SFP_CABLE_PASSIVE) { 2064 xgbe_phy_perform_ratechange(pdata, 3, 0); 2065 } else { 2066 if (phy_data->sfp_cable_len <= 1) 2067 xgbe_phy_perform_ratechange(pdata, 3, 1); 2068 else if (phy_data->sfp_cable_len <= 3) 2069 xgbe_phy_perform_ratechange(pdata, 3, 2); 2070 else 2071 xgbe_phy_perform_ratechange(pdata, 3, 3); 2072 } 2073 2074 phy_data->cur_mode = XGBE_MODE_SFI; 2075 2076 netif_dbg(pdata, link, pdata->netdev, "10GbE SFI mode set\n"); 2077 } 2078 2079 static void xgbe_phy_x_mode(struct xgbe_prv_data *pdata) 2080 { 2081 struct xgbe_phy_data *phy_data = pdata->phy_data; 2082 2083 xgbe_phy_set_redrv_mode(pdata); 2084 2085 /* 1G/X */ 2086 xgbe_phy_perform_ratechange(pdata, 1, 3); 2087 2088 phy_data->cur_mode = XGBE_MODE_X; 2089 2090 netif_dbg(pdata, link, pdata->netdev, "1GbE X mode set\n"); 2091 } 2092 2093 static void xgbe_phy_sgmii_1000_mode(struct xgbe_prv_data *pdata) 2094 { 2095 struct xgbe_phy_data *phy_data = pdata->phy_data; 2096 2097 xgbe_phy_set_redrv_mode(pdata); 2098 2099 /* 1G/SGMII */ 2100 xgbe_phy_perform_ratechange(pdata, 1, 2); 2101 2102 phy_data->cur_mode = XGBE_MODE_SGMII_1000; 2103 2104 netif_dbg(pdata, link, pdata->netdev, "1GbE SGMII mode set\n"); 2105 } 2106 2107 static void xgbe_phy_sgmii_100_mode(struct xgbe_prv_data *pdata) 2108 { 2109 struct xgbe_phy_data *phy_data = pdata->phy_data; 2110 2111 xgbe_phy_set_redrv_mode(pdata); 2112 2113 /* 100M/SGMII */ 2114 xgbe_phy_perform_ratechange(pdata, 1, 1); 2115 2116 phy_data->cur_mode = XGBE_MODE_SGMII_100; 2117 2118 netif_dbg(pdata, link, pdata->netdev, "100MbE SGMII mode set\n"); 2119 } 2120 2121 static void xgbe_phy_kr_mode(struct xgbe_prv_data *pdata) 2122 { 2123 struct xgbe_phy_data *phy_data = pdata->phy_data; 2124 2125 xgbe_phy_set_redrv_mode(pdata); 2126 2127 /* 10G/KR */ 2128 xgbe_phy_perform_ratechange(pdata, 4, 0); 2129 2130 phy_data->cur_mode = XGBE_MODE_KR; 2131 2132 netif_dbg(pdata, link, pdata->netdev, "10GbE KR mode set\n"); 2133 } 2134 2135 static void xgbe_phy_kx_2500_mode(struct xgbe_prv_data *pdata) 2136 { 2137 struct xgbe_phy_data *phy_data = pdata->phy_data; 2138 2139 xgbe_phy_set_redrv_mode(pdata); 2140 2141 /* 2.5G/KX */ 2142 xgbe_phy_perform_ratechange(pdata, 2, 0); 2143 2144 phy_data->cur_mode = XGBE_MODE_KX_2500; 2145 2146 netif_dbg(pdata, link, pdata->netdev, "2.5GbE KX mode set\n"); 2147 } 2148 2149 static void xgbe_phy_kx_1000_mode(struct xgbe_prv_data *pdata) 2150 { 2151 struct xgbe_phy_data *phy_data = pdata->phy_data; 2152 2153 xgbe_phy_set_redrv_mode(pdata); 2154 2155 /* 1G/KX */ 2156 xgbe_phy_perform_ratechange(pdata, 1, 3); 2157 2158 phy_data->cur_mode = XGBE_MODE_KX_1000; 2159 2160 netif_dbg(pdata, link, pdata->netdev, "1GbE KX mode set\n"); 2161 } 2162 2163 static enum xgbe_mode xgbe_phy_cur_mode(struct xgbe_prv_data *pdata) 2164 { 2165 struct xgbe_phy_data *phy_data = pdata->phy_data; 2166 2167 return phy_data->cur_mode; 2168 } 2169 2170 static enum xgbe_mode xgbe_phy_switch_baset_mode(struct xgbe_prv_data *pdata) 2171 { 2172 struct xgbe_phy_data *phy_data = pdata->phy_data; 2173 2174 /* No switching if not 10GBase-T */ 2175 if (phy_data->port_mode != XGBE_PORT_MODE_10GBASE_T) 2176 return xgbe_phy_cur_mode(pdata); 2177 2178 switch (xgbe_phy_cur_mode(pdata)) { 2179 case XGBE_MODE_SGMII_100: 2180 case XGBE_MODE_SGMII_1000: 2181 return XGBE_MODE_KR; 2182 case XGBE_MODE_KR: 2183 default: 2184 return XGBE_MODE_SGMII_1000; 2185 } 2186 } 2187 2188 static enum xgbe_mode xgbe_phy_switch_bp_2500_mode(struct xgbe_prv_data *pdata) 2189 { 2190 return XGBE_MODE_KX_2500; 2191 } 2192 2193 static enum xgbe_mode xgbe_phy_switch_bp_mode(struct xgbe_prv_data *pdata) 2194 { 2195 /* If we are in KR switch to KX, and vice-versa */ 2196 switch (xgbe_phy_cur_mode(pdata)) { 2197 case XGBE_MODE_KX_1000: 2198 return XGBE_MODE_KR; 2199 case XGBE_MODE_KR: 2200 default: 2201 return XGBE_MODE_KX_1000; 2202 } 2203 } 2204 2205 static enum xgbe_mode xgbe_phy_switch_mode(struct xgbe_prv_data *pdata) 2206 { 2207 struct xgbe_phy_data *phy_data = pdata->phy_data; 2208 2209 switch (phy_data->port_mode) { 2210 case XGBE_PORT_MODE_BACKPLANE: 2211 case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG: 2212 return xgbe_phy_switch_bp_mode(pdata); 2213 case XGBE_PORT_MODE_BACKPLANE_2500: 2214 return xgbe_phy_switch_bp_2500_mode(pdata); 2215 case XGBE_PORT_MODE_1000BASE_T: 2216 case XGBE_PORT_MODE_NBASE_T: 2217 case XGBE_PORT_MODE_10GBASE_T: 2218 return xgbe_phy_switch_baset_mode(pdata); 2219 case XGBE_PORT_MODE_1000BASE_X: 2220 case XGBE_PORT_MODE_10GBASE_R: 2221 case XGBE_PORT_MODE_SFP: 2222 /* No switching, so just return current mode */ 2223 return xgbe_phy_cur_mode(pdata); 2224 default: 2225 return XGBE_MODE_UNKNOWN; 2226 } 2227 } 2228 2229 static enum xgbe_mode xgbe_phy_get_basex_mode(struct xgbe_phy_data *phy_data, 2230 int speed) 2231 { 2232 switch (speed) { 2233 case SPEED_1000: 2234 return XGBE_MODE_X; 2235 case SPEED_10000: 2236 return XGBE_MODE_KR; 2237 default: 2238 return XGBE_MODE_UNKNOWN; 2239 } 2240 } 2241 2242 static enum xgbe_mode xgbe_phy_get_baset_mode(struct xgbe_phy_data *phy_data, 2243 int speed) 2244 { 2245 switch (speed) { 2246 case SPEED_100: 2247 return XGBE_MODE_SGMII_100; 2248 case SPEED_1000: 2249 return XGBE_MODE_SGMII_1000; 2250 case SPEED_2500: 2251 return XGBE_MODE_KX_2500; 2252 case SPEED_10000: 2253 return XGBE_MODE_KR; 2254 default: 2255 return XGBE_MODE_UNKNOWN; 2256 } 2257 } 2258 2259 static enum xgbe_mode xgbe_phy_get_sfp_mode(struct xgbe_phy_data *phy_data, 2260 int speed) 2261 { 2262 switch (speed) { 2263 case SPEED_100: 2264 return XGBE_MODE_SGMII_100; 2265 case SPEED_1000: 2266 if (phy_data->sfp_base == XGBE_SFP_BASE_1000_T) 2267 return XGBE_MODE_SGMII_1000; 2268 else 2269 return XGBE_MODE_X; 2270 case SPEED_10000: 2271 case SPEED_UNKNOWN: 2272 return XGBE_MODE_SFI; 2273 default: 2274 return XGBE_MODE_UNKNOWN; 2275 } 2276 } 2277 2278 static enum xgbe_mode xgbe_phy_get_bp_2500_mode(int speed) 2279 { 2280 switch (speed) { 2281 case SPEED_2500: 2282 return XGBE_MODE_KX_2500; 2283 default: 2284 return XGBE_MODE_UNKNOWN; 2285 } 2286 } 2287 2288 static enum xgbe_mode xgbe_phy_get_bp_mode(int speed) 2289 { 2290 switch (speed) { 2291 case SPEED_1000: 2292 return XGBE_MODE_KX_1000; 2293 case SPEED_10000: 2294 return XGBE_MODE_KR; 2295 default: 2296 return XGBE_MODE_UNKNOWN; 2297 } 2298 } 2299 2300 static enum xgbe_mode xgbe_phy_get_mode(struct xgbe_prv_data *pdata, 2301 int speed) 2302 { 2303 struct xgbe_phy_data *phy_data = pdata->phy_data; 2304 2305 switch (phy_data->port_mode) { 2306 case XGBE_PORT_MODE_BACKPLANE: 2307 case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG: 2308 return xgbe_phy_get_bp_mode(speed); 2309 case XGBE_PORT_MODE_BACKPLANE_2500: 2310 return xgbe_phy_get_bp_2500_mode(speed); 2311 case XGBE_PORT_MODE_1000BASE_T: 2312 case XGBE_PORT_MODE_NBASE_T: 2313 case XGBE_PORT_MODE_10GBASE_T: 2314 return xgbe_phy_get_baset_mode(phy_data, speed); 2315 case XGBE_PORT_MODE_1000BASE_X: 2316 case XGBE_PORT_MODE_10GBASE_R: 2317 return xgbe_phy_get_basex_mode(phy_data, speed); 2318 case XGBE_PORT_MODE_SFP: 2319 return xgbe_phy_get_sfp_mode(phy_data, speed); 2320 default: 2321 return XGBE_MODE_UNKNOWN; 2322 } 2323 } 2324 2325 static void xgbe_phy_set_mode(struct xgbe_prv_data *pdata, enum xgbe_mode mode) 2326 { 2327 switch (mode) { 2328 case XGBE_MODE_KX_1000: 2329 xgbe_phy_kx_1000_mode(pdata); 2330 break; 2331 case XGBE_MODE_KX_2500: 2332 xgbe_phy_kx_2500_mode(pdata); 2333 break; 2334 case XGBE_MODE_KR: 2335 xgbe_phy_kr_mode(pdata); 2336 break; 2337 case XGBE_MODE_SGMII_100: 2338 xgbe_phy_sgmii_100_mode(pdata); 2339 break; 2340 case XGBE_MODE_SGMII_1000: 2341 xgbe_phy_sgmii_1000_mode(pdata); 2342 break; 2343 case XGBE_MODE_X: 2344 xgbe_phy_x_mode(pdata); 2345 break; 2346 case XGBE_MODE_SFI: 2347 xgbe_phy_sfi_mode(pdata); 2348 break; 2349 default: 2350 break; 2351 } 2352 } 2353 2354 static bool xgbe_phy_check_mode(struct xgbe_prv_data *pdata, 2355 enum xgbe_mode mode, bool advert) 2356 { 2357 if (pdata->phy.autoneg == AUTONEG_ENABLE) { 2358 return advert; 2359 } else { 2360 enum xgbe_mode cur_mode; 2361 2362 cur_mode = xgbe_phy_get_mode(pdata, pdata->phy.speed); 2363 if (cur_mode == mode) 2364 return true; 2365 } 2366 2367 return false; 2368 } 2369 2370 static bool xgbe_phy_use_basex_mode(struct xgbe_prv_data *pdata, 2371 enum xgbe_mode mode) 2372 { 2373 struct ethtool_link_ksettings *lks = &pdata->phy.lks; 2374 2375 switch (mode) { 2376 case XGBE_MODE_X: 2377 return xgbe_phy_check_mode(pdata, mode, 2378 XGBE_ADV(lks, 1000baseX_Full)); 2379 case XGBE_MODE_KR: 2380 return xgbe_phy_check_mode(pdata, mode, 2381 XGBE_ADV(lks, 10000baseKR_Full)); 2382 default: 2383 return false; 2384 } 2385 } 2386 2387 static bool xgbe_phy_use_baset_mode(struct xgbe_prv_data *pdata, 2388 enum xgbe_mode mode) 2389 { 2390 struct ethtool_link_ksettings *lks = &pdata->phy.lks; 2391 2392 switch (mode) { 2393 case XGBE_MODE_SGMII_100: 2394 return xgbe_phy_check_mode(pdata, mode, 2395 XGBE_ADV(lks, 100baseT_Full)); 2396 case XGBE_MODE_SGMII_1000: 2397 return xgbe_phy_check_mode(pdata, mode, 2398 XGBE_ADV(lks, 1000baseT_Full)); 2399 case XGBE_MODE_KX_2500: 2400 return xgbe_phy_check_mode(pdata, mode, 2401 XGBE_ADV(lks, 2500baseT_Full)); 2402 case XGBE_MODE_KR: 2403 return xgbe_phy_check_mode(pdata, mode, 2404 XGBE_ADV(lks, 10000baseT_Full)); 2405 default: 2406 return false; 2407 } 2408 } 2409 2410 static bool xgbe_phy_use_sfp_mode(struct xgbe_prv_data *pdata, 2411 enum xgbe_mode mode) 2412 { 2413 struct ethtool_link_ksettings *lks = &pdata->phy.lks; 2414 struct xgbe_phy_data *phy_data = pdata->phy_data; 2415 2416 switch (mode) { 2417 case XGBE_MODE_X: 2418 if (phy_data->sfp_base == XGBE_SFP_BASE_1000_T) 2419 return false; 2420 return xgbe_phy_check_mode(pdata, mode, 2421 XGBE_ADV(lks, 1000baseX_Full)); 2422 case XGBE_MODE_SGMII_100: 2423 if (phy_data->sfp_base != XGBE_SFP_BASE_1000_T) 2424 return false; 2425 return xgbe_phy_check_mode(pdata, mode, 2426 XGBE_ADV(lks, 100baseT_Full)); 2427 case XGBE_MODE_SGMII_1000: 2428 if (phy_data->sfp_base != XGBE_SFP_BASE_1000_T) 2429 return false; 2430 return xgbe_phy_check_mode(pdata, mode, 2431 XGBE_ADV(lks, 1000baseT_Full)); 2432 case XGBE_MODE_SFI: 2433 if (phy_data->sfp_mod_absent) 2434 return true; 2435 return xgbe_phy_check_mode(pdata, mode, 2436 XGBE_ADV(lks, 10000baseSR_Full) || 2437 XGBE_ADV(lks, 10000baseLR_Full) || 2438 XGBE_ADV(lks, 10000baseLRM_Full) || 2439 XGBE_ADV(lks, 10000baseER_Full) || 2440 XGBE_ADV(lks, 10000baseCR_Full)); 2441 default: 2442 return false; 2443 } 2444 } 2445 2446 static bool xgbe_phy_use_bp_2500_mode(struct xgbe_prv_data *pdata, 2447 enum xgbe_mode mode) 2448 { 2449 struct ethtool_link_ksettings *lks = &pdata->phy.lks; 2450 2451 switch (mode) { 2452 case XGBE_MODE_KX_2500: 2453 return xgbe_phy_check_mode(pdata, mode, 2454 XGBE_ADV(lks, 2500baseX_Full)); 2455 default: 2456 return false; 2457 } 2458 } 2459 2460 static bool xgbe_phy_use_bp_mode(struct xgbe_prv_data *pdata, 2461 enum xgbe_mode mode) 2462 { 2463 struct ethtool_link_ksettings *lks = &pdata->phy.lks; 2464 2465 switch (mode) { 2466 case XGBE_MODE_KX_1000: 2467 return xgbe_phy_check_mode(pdata, mode, 2468 XGBE_ADV(lks, 1000baseKX_Full)); 2469 case XGBE_MODE_KR: 2470 return xgbe_phy_check_mode(pdata, mode, 2471 XGBE_ADV(lks, 10000baseKR_Full)); 2472 default: 2473 return false; 2474 } 2475 } 2476 2477 static bool xgbe_phy_use_mode(struct xgbe_prv_data *pdata, enum xgbe_mode mode) 2478 { 2479 struct xgbe_phy_data *phy_data = pdata->phy_data; 2480 2481 switch (phy_data->port_mode) { 2482 case XGBE_PORT_MODE_BACKPLANE: 2483 case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG: 2484 return xgbe_phy_use_bp_mode(pdata, mode); 2485 case XGBE_PORT_MODE_BACKPLANE_2500: 2486 return xgbe_phy_use_bp_2500_mode(pdata, mode); 2487 case XGBE_PORT_MODE_1000BASE_T: 2488 case XGBE_PORT_MODE_NBASE_T: 2489 case XGBE_PORT_MODE_10GBASE_T: 2490 return xgbe_phy_use_baset_mode(pdata, mode); 2491 case XGBE_PORT_MODE_1000BASE_X: 2492 case XGBE_PORT_MODE_10GBASE_R: 2493 return xgbe_phy_use_basex_mode(pdata, mode); 2494 case XGBE_PORT_MODE_SFP: 2495 return xgbe_phy_use_sfp_mode(pdata, mode); 2496 default: 2497 return false; 2498 } 2499 } 2500 2501 static bool xgbe_phy_valid_speed_basex_mode(struct xgbe_phy_data *phy_data, 2502 int speed) 2503 { 2504 switch (speed) { 2505 case SPEED_1000: 2506 return (phy_data->port_mode == XGBE_PORT_MODE_1000BASE_X); 2507 case SPEED_10000: 2508 return (phy_data->port_mode == XGBE_PORT_MODE_10GBASE_R); 2509 default: 2510 return false; 2511 } 2512 } 2513 2514 static bool xgbe_phy_valid_speed_baset_mode(struct xgbe_phy_data *phy_data, 2515 int speed) 2516 { 2517 switch (speed) { 2518 case SPEED_100: 2519 case SPEED_1000: 2520 return true; 2521 case SPEED_2500: 2522 return (phy_data->port_mode == XGBE_PORT_MODE_NBASE_T); 2523 case SPEED_10000: 2524 return (phy_data->port_mode == XGBE_PORT_MODE_10GBASE_T); 2525 default: 2526 return false; 2527 } 2528 } 2529 2530 static bool xgbe_phy_valid_speed_sfp_mode(struct xgbe_phy_data *phy_data, 2531 int speed) 2532 { 2533 switch (speed) { 2534 case SPEED_100: 2535 return (phy_data->sfp_speed == XGBE_SFP_SPEED_100_1000); 2536 case SPEED_1000: 2537 return ((phy_data->sfp_speed == XGBE_SFP_SPEED_100_1000) || 2538 (phy_data->sfp_speed == XGBE_SFP_SPEED_1000)); 2539 case SPEED_10000: 2540 return (phy_data->sfp_speed == XGBE_SFP_SPEED_10000); 2541 default: 2542 return false; 2543 } 2544 } 2545 2546 static bool xgbe_phy_valid_speed_bp_2500_mode(int speed) 2547 { 2548 switch (speed) { 2549 case SPEED_2500: 2550 return true; 2551 default: 2552 return false; 2553 } 2554 } 2555 2556 static bool xgbe_phy_valid_speed_bp_mode(int speed) 2557 { 2558 switch (speed) { 2559 case SPEED_1000: 2560 case SPEED_10000: 2561 return true; 2562 default: 2563 return false; 2564 } 2565 } 2566 2567 static bool xgbe_phy_valid_speed(struct xgbe_prv_data *pdata, int speed) 2568 { 2569 struct xgbe_phy_data *phy_data = pdata->phy_data; 2570 2571 switch (phy_data->port_mode) { 2572 case XGBE_PORT_MODE_BACKPLANE: 2573 case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG: 2574 return xgbe_phy_valid_speed_bp_mode(speed); 2575 case XGBE_PORT_MODE_BACKPLANE_2500: 2576 return xgbe_phy_valid_speed_bp_2500_mode(speed); 2577 case XGBE_PORT_MODE_1000BASE_T: 2578 case XGBE_PORT_MODE_NBASE_T: 2579 case XGBE_PORT_MODE_10GBASE_T: 2580 return xgbe_phy_valid_speed_baset_mode(phy_data, speed); 2581 case XGBE_PORT_MODE_1000BASE_X: 2582 case XGBE_PORT_MODE_10GBASE_R: 2583 return xgbe_phy_valid_speed_basex_mode(phy_data, speed); 2584 case XGBE_PORT_MODE_SFP: 2585 return xgbe_phy_valid_speed_sfp_mode(phy_data, speed); 2586 default: 2587 return false; 2588 } 2589 } 2590 2591 static int xgbe_phy_link_status(struct xgbe_prv_data *pdata, int *an_restart) 2592 { 2593 struct xgbe_phy_data *phy_data = pdata->phy_data; 2594 unsigned int reg; 2595 int ret; 2596 2597 *an_restart = 0; 2598 2599 if (phy_data->port_mode == XGBE_PORT_MODE_SFP) { 2600 /* Check SFP signals */ 2601 xgbe_phy_sfp_detect(pdata); 2602 2603 if (phy_data->sfp_changed) { 2604 *an_restart = 1; 2605 return 0; 2606 } 2607 2608 if (phy_data->sfp_mod_absent || phy_data->sfp_rx_los) 2609 return 0; 2610 } 2611 2612 if (phy_data->phydev) { 2613 /* Check external PHY */ 2614 ret = phy_read_status(phy_data->phydev); 2615 if (ret < 0) 2616 return 0; 2617 2618 if ((pdata->phy.autoneg == AUTONEG_ENABLE) && 2619 !phy_aneg_done(phy_data->phydev)) 2620 return 0; 2621 2622 if (!phy_data->phydev->link) 2623 return 0; 2624 } 2625 2626 /* Link status is latched low, so read once to clear 2627 * and then read again to get current state 2628 */ 2629 reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1); 2630 reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1); 2631 if (reg & MDIO_STAT1_LSTATUS) 2632 return 1; 2633 2634 if (pdata->phy.autoneg == AUTONEG_ENABLE && 2635 phy_data->port_mode == XGBE_PORT_MODE_BACKPLANE) { 2636 if (!test_bit(XGBE_LINK_INIT, &pdata->dev_state)) { 2637 netif_carrier_off(pdata->netdev); 2638 *an_restart = 1; 2639 } 2640 } 2641 2642 /* No link, attempt a receiver reset cycle */ 2643 if (phy_data->rrc_count++ > XGBE_RRC_FREQUENCY) { 2644 phy_data->rrc_count = 0; 2645 xgbe_phy_rrc(pdata); 2646 } 2647 2648 return 0; 2649 } 2650 2651 static void xgbe_phy_sfp_gpio_setup(struct xgbe_prv_data *pdata) 2652 { 2653 struct xgbe_phy_data *phy_data = pdata->phy_data; 2654 2655 phy_data->sfp_gpio_address = XGBE_GPIO_ADDRESS_PCA9555 + 2656 XP_GET_BITS(pdata->pp3, XP_PROP_3, 2657 GPIO_ADDR); 2658 2659 phy_data->sfp_gpio_mask = XP_GET_BITS(pdata->pp3, XP_PROP_3, 2660 GPIO_MASK); 2661 2662 phy_data->sfp_gpio_rx_los = XP_GET_BITS(pdata->pp3, XP_PROP_3, 2663 GPIO_RX_LOS); 2664 phy_data->sfp_gpio_tx_fault = XP_GET_BITS(pdata->pp3, XP_PROP_3, 2665 GPIO_TX_FAULT); 2666 phy_data->sfp_gpio_mod_absent = XP_GET_BITS(pdata->pp3, XP_PROP_3, 2667 GPIO_MOD_ABS); 2668 phy_data->sfp_gpio_rate_select = XP_GET_BITS(pdata->pp3, XP_PROP_3, 2669 GPIO_RATE_SELECT); 2670 2671 if (netif_msg_probe(pdata)) { 2672 dev_dbg(pdata->dev, "SFP: gpio_address=%#x\n", 2673 phy_data->sfp_gpio_address); 2674 dev_dbg(pdata->dev, "SFP: gpio_mask=%#x\n", 2675 phy_data->sfp_gpio_mask); 2676 dev_dbg(pdata->dev, "SFP: gpio_rx_los=%u\n", 2677 phy_data->sfp_gpio_rx_los); 2678 dev_dbg(pdata->dev, "SFP: gpio_tx_fault=%u\n", 2679 phy_data->sfp_gpio_tx_fault); 2680 dev_dbg(pdata->dev, "SFP: gpio_mod_absent=%u\n", 2681 phy_data->sfp_gpio_mod_absent); 2682 dev_dbg(pdata->dev, "SFP: gpio_rate_select=%u\n", 2683 phy_data->sfp_gpio_rate_select); 2684 } 2685 } 2686 2687 static void xgbe_phy_sfp_comm_setup(struct xgbe_prv_data *pdata) 2688 { 2689 struct xgbe_phy_data *phy_data = pdata->phy_data; 2690 unsigned int mux_addr_hi, mux_addr_lo; 2691 2692 mux_addr_hi = XP_GET_BITS(pdata->pp4, XP_PROP_4, MUX_ADDR_HI); 2693 mux_addr_lo = XP_GET_BITS(pdata->pp4, XP_PROP_4, MUX_ADDR_LO); 2694 if (mux_addr_lo == XGBE_SFP_DIRECT) 2695 return; 2696 2697 phy_data->sfp_comm = XGBE_SFP_COMM_PCA9545; 2698 phy_data->sfp_mux_address = (mux_addr_hi << 2) + mux_addr_lo; 2699 phy_data->sfp_mux_channel = XP_GET_BITS(pdata->pp4, XP_PROP_4, 2700 MUX_CHAN); 2701 2702 if (netif_msg_probe(pdata)) { 2703 dev_dbg(pdata->dev, "SFP: mux_address=%#x\n", 2704 phy_data->sfp_mux_address); 2705 dev_dbg(pdata->dev, "SFP: mux_channel=%u\n", 2706 phy_data->sfp_mux_channel); 2707 } 2708 } 2709 2710 static void xgbe_phy_sfp_setup(struct xgbe_prv_data *pdata) 2711 { 2712 xgbe_phy_sfp_comm_setup(pdata); 2713 xgbe_phy_sfp_gpio_setup(pdata); 2714 } 2715 2716 static int xgbe_phy_int_mdio_reset(struct xgbe_prv_data *pdata) 2717 { 2718 struct xgbe_phy_data *phy_data = pdata->phy_data; 2719 unsigned int ret; 2720 2721 ret = pdata->hw_if.set_gpio(pdata, phy_data->mdio_reset_gpio); 2722 if (ret) 2723 return ret; 2724 2725 ret = pdata->hw_if.clr_gpio(pdata, phy_data->mdio_reset_gpio); 2726 2727 return ret; 2728 } 2729 2730 static int xgbe_phy_i2c_mdio_reset(struct xgbe_prv_data *pdata) 2731 { 2732 struct xgbe_phy_data *phy_data = pdata->phy_data; 2733 u8 gpio_reg, gpio_ports[2], gpio_data[3]; 2734 int ret; 2735 2736 /* Read the output port registers */ 2737 gpio_reg = 2; 2738 ret = xgbe_phy_i2c_read(pdata, phy_data->mdio_reset_addr, 2739 &gpio_reg, sizeof(gpio_reg), 2740 gpio_ports, sizeof(gpio_ports)); 2741 if (ret) 2742 return ret; 2743 2744 /* Prepare to write the GPIO data */ 2745 gpio_data[0] = 2; 2746 gpio_data[1] = gpio_ports[0]; 2747 gpio_data[2] = gpio_ports[1]; 2748 2749 /* Set the GPIO pin */ 2750 if (phy_data->mdio_reset_gpio < 8) 2751 gpio_data[1] |= (1 << (phy_data->mdio_reset_gpio % 8)); 2752 else 2753 gpio_data[2] |= (1 << (phy_data->mdio_reset_gpio % 8)); 2754 2755 /* Write the output port registers */ 2756 ret = xgbe_phy_i2c_write(pdata, phy_data->mdio_reset_addr, 2757 gpio_data, sizeof(gpio_data)); 2758 if (ret) 2759 return ret; 2760 2761 /* Clear the GPIO pin */ 2762 if (phy_data->mdio_reset_gpio < 8) 2763 gpio_data[1] &= ~(1 << (phy_data->mdio_reset_gpio % 8)); 2764 else 2765 gpio_data[2] &= ~(1 << (phy_data->mdio_reset_gpio % 8)); 2766 2767 /* Write the output port registers */ 2768 ret = xgbe_phy_i2c_write(pdata, phy_data->mdio_reset_addr, 2769 gpio_data, sizeof(gpio_data)); 2770 2771 return ret; 2772 } 2773 2774 static int xgbe_phy_mdio_reset(struct xgbe_prv_data *pdata) 2775 { 2776 struct xgbe_phy_data *phy_data = pdata->phy_data; 2777 int ret; 2778 2779 if (phy_data->conn_type != XGBE_CONN_TYPE_MDIO) 2780 return 0; 2781 2782 ret = xgbe_phy_get_comm_ownership(pdata); 2783 if (ret) 2784 return ret; 2785 2786 if (phy_data->mdio_reset == XGBE_MDIO_RESET_I2C_GPIO) 2787 ret = xgbe_phy_i2c_mdio_reset(pdata); 2788 else if (phy_data->mdio_reset == XGBE_MDIO_RESET_INT_GPIO) 2789 ret = xgbe_phy_int_mdio_reset(pdata); 2790 2791 xgbe_phy_put_comm_ownership(pdata); 2792 2793 return ret; 2794 } 2795 2796 static bool xgbe_phy_redrv_error(struct xgbe_phy_data *phy_data) 2797 { 2798 if (!phy_data->redrv) 2799 return false; 2800 2801 if (phy_data->redrv_if >= XGBE_PHY_REDRV_IF_MAX) 2802 return true; 2803 2804 switch (phy_data->redrv_model) { 2805 case XGBE_PHY_REDRV_MODEL_4223: 2806 if (phy_data->redrv_lane > 3) 2807 return true; 2808 break; 2809 case XGBE_PHY_REDRV_MODEL_4227: 2810 if (phy_data->redrv_lane > 1) 2811 return true; 2812 break; 2813 default: 2814 return true; 2815 } 2816 2817 return false; 2818 } 2819 2820 static int xgbe_phy_mdio_reset_setup(struct xgbe_prv_data *pdata) 2821 { 2822 struct xgbe_phy_data *phy_data = pdata->phy_data; 2823 2824 if (phy_data->conn_type != XGBE_CONN_TYPE_MDIO) 2825 return 0; 2826 2827 phy_data->mdio_reset = XP_GET_BITS(pdata->pp3, XP_PROP_3, MDIO_RESET); 2828 switch (phy_data->mdio_reset) { 2829 case XGBE_MDIO_RESET_NONE: 2830 case XGBE_MDIO_RESET_I2C_GPIO: 2831 case XGBE_MDIO_RESET_INT_GPIO: 2832 break; 2833 default: 2834 dev_err(pdata->dev, "unsupported MDIO reset (%#x)\n", 2835 phy_data->mdio_reset); 2836 return -EINVAL; 2837 } 2838 2839 if (phy_data->mdio_reset == XGBE_MDIO_RESET_I2C_GPIO) { 2840 phy_data->mdio_reset_addr = XGBE_GPIO_ADDRESS_PCA9555 + 2841 XP_GET_BITS(pdata->pp3, XP_PROP_3, 2842 MDIO_RESET_I2C_ADDR); 2843 phy_data->mdio_reset_gpio = XP_GET_BITS(pdata->pp3, XP_PROP_3, 2844 MDIO_RESET_I2C_GPIO); 2845 } else if (phy_data->mdio_reset == XGBE_MDIO_RESET_INT_GPIO) { 2846 phy_data->mdio_reset_gpio = XP_GET_BITS(pdata->pp3, XP_PROP_3, 2847 MDIO_RESET_INT_GPIO); 2848 } 2849 2850 return 0; 2851 } 2852 2853 static bool xgbe_phy_port_mode_mismatch(struct xgbe_prv_data *pdata) 2854 { 2855 struct xgbe_phy_data *phy_data = pdata->phy_data; 2856 2857 switch (phy_data->port_mode) { 2858 case XGBE_PORT_MODE_BACKPLANE: 2859 case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG: 2860 if ((phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000) || 2861 (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_10000)) 2862 return false; 2863 break; 2864 case XGBE_PORT_MODE_BACKPLANE_2500: 2865 if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_2500) 2866 return false; 2867 break; 2868 case XGBE_PORT_MODE_1000BASE_T: 2869 if ((phy_data->port_speeds & XGBE_PHY_PORT_SPEED_100) || 2870 (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000)) 2871 return false; 2872 break; 2873 case XGBE_PORT_MODE_1000BASE_X: 2874 if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000) 2875 return false; 2876 break; 2877 case XGBE_PORT_MODE_NBASE_T: 2878 if ((phy_data->port_speeds & XGBE_PHY_PORT_SPEED_100) || 2879 (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000) || 2880 (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_2500)) 2881 return false; 2882 break; 2883 case XGBE_PORT_MODE_10GBASE_T: 2884 if ((phy_data->port_speeds & XGBE_PHY_PORT_SPEED_100) || 2885 (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000) || 2886 (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_10000)) 2887 return false; 2888 break; 2889 case XGBE_PORT_MODE_10GBASE_R: 2890 if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_10000) 2891 return false; 2892 break; 2893 case XGBE_PORT_MODE_SFP: 2894 if ((phy_data->port_speeds & XGBE_PHY_PORT_SPEED_100) || 2895 (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000) || 2896 (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_10000)) 2897 return false; 2898 break; 2899 default: 2900 break; 2901 } 2902 2903 return true; 2904 } 2905 2906 static bool xgbe_phy_conn_type_mismatch(struct xgbe_prv_data *pdata) 2907 { 2908 struct xgbe_phy_data *phy_data = pdata->phy_data; 2909 2910 switch (phy_data->port_mode) { 2911 case XGBE_PORT_MODE_BACKPLANE: 2912 case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG: 2913 case XGBE_PORT_MODE_BACKPLANE_2500: 2914 if (phy_data->conn_type == XGBE_CONN_TYPE_BACKPLANE) 2915 return false; 2916 break; 2917 case XGBE_PORT_MODE_1000BASE_T: 2918 case XGBE_PORT_MODE_1000BASE_X: 2919 case XGBE_PORT_MODE_NBASE_T: 2920 case XGBE_PORT_MODE_10GBASE_T: 2921 case XGBE_PORT_MODE_10GBASE_R: 2922 if (phy_data->conn_type == XGBE_CONN_TYPE_MDIO) 2923 return false; 2924 break; 2925 case XGBE_PORT_MODE_SFP: 2926 if (phy_data->conn_type == XGBE_CONN_TYPE_SFP) 2927 return false; 2928 break; 2929 default: 2930 break; 2931 } 2932 2933 return true; 2934 } 2935 2936 static bool xgbe_phy_port_enabled(struct xgbe_prv_data *pdata) 2937 { 2938 if (!XP_GET_BITS(pdata->pp0, XP_PROP_0, PORT_SPEEDS)) 2939 return false; 2940 if (!XP_GET_BITS(pdata->pp0, XP_PROP_0, CONN_TYPE)) 2941 return false; 2942 2943 return true; 2944 } 2945 2946 static void xgbe_phy_cdr_track(struct xgbe_prv_data *pdata) 2947 { 2948 struct xgbe_phy_data *phy_data = pdata->phy_data; 2949 2950 if (!pdata->debugfs_an_cdr_workaround) 2951 return; 2952 2953 if (!phy_data->phy_cdr_notrack) 2954 return; 2955 2956 usleep_range(phy_data->phy_cdr_delay, 2957 phy_data->phy_cdr_delay + 500); 2958 2959 XMDIO_WRITE_BITS(pdata, MDIO_MMD_PMAPMD, MDIO_VEND2_PMA_CDR_CONTROL, 2960 XGBE_PMA_CDR_TRACK_EN_MASK, 2961 XGBE_PMA_CDR_TRACK_EN_ON); 2962 2963 phy_data->phy_cdr_notrack = 0; 2964 } 2965 2966 static void xgbe_phy_cdr_notrack(struct xgbe_prv_data *pdata) 2967 { 2968 struct xgbe_phy_data *phy_data = pdata->phy_data; 2969 2970 if (!pdata->debugfs_an_cdr_workaround) 2971 return; 2972 2973 if (phy_data->phy_cdr_notrack) 2974 return; 2975 2976 XMDIO_WRITE_BITS(pdata, MDIO_MMD_PMAPMD, MDIO_VEND2_PMA_CDR_CONTROL, 2977 XGBE_PMA_CDR_TRACK_EN_MASK, 2978 XGBE_PMA_CDR_TRACK_EN_OFF); 2979 2980 xgbe_phy_rrc(pdata); 2981 2982 phy_data->phy_cdr_notrack = 1; 2983 } 2984 2985 static void xgbe_phy_kr_training_post(struct xgbe_prv_data *pdata) 2986 { 2987 if (!pdata->debugfs_an_cdr_track_early) 2988 xgbe_phy_cdr_track(pdata); 2989 } 2990 2991 static void xgbe_phy_kr_training_pre(struct xgbe_prv_data *pdata) 2992 { 2993 if (pdata->debugfs_an_cdr_track_early) 2994 xgbe_phy_cdr_track(pdata); 2995 } 2996 2997 static void xgbe_phy_an_post(struct xgbe_prv_data *pdata) 2998 { 2999 struct xgbe_phy_data *phy_data = pdata->phy_data; 3000 3001 switch (pdata->an_mode) { 3002 case XGBE_AN_MODE_CL73: 3003 case XGBE_AN_MODE_CL73_REDRV: 3004 if (phy_data->cur_mode != XGBE_MODE_KR) 3005 break; 3006 3007 xgbe_phy_cdr_track(pdata); 3008 3009 switch (pdata->an_result) { 3010 case XGBE_AN_READY: 3011 case XGBE_AN_COMPLETE: 3012 break; 3013 default: 3014 if (phy_data->phy_cdr_delay < XGBE_CDR_DELAY_MAX) 3015 phy_data->phy_cdr_delay += XGBE_CDR_DELAY_INC; 3016 else 3017 phy_data->phy_cdr_delay = XGBE_CDR_DELAY_INIT; 3018 break; 3019 } 3020 break; 3021 default: 3022 break; 3023 } 3024 } 3025 3026 static void xgbe_phy_an_pre(struct xgbe_prv_data *pdata) 3027 { 3028 struct xgbe_phy_data *phy_data = pdata->phy_data; 3029 3030 switch (pdata->an_mode) { 3031 case XGBE_AN_MODE_CL73: 3032 case XGBE_AN_MODE_CL73_REDRV: 3033 if (phy_data->cur_mode != XGBE_MODE_KR) 3034 break; 3035 3036 xgbe_phy_cdr_notrack(pdata); 3037 break; 3038 default: 3039 break; 3040 } 3041 } 3042 3043 static void xgbe_phy_stop(struct xgbe_prv_data *pdata) 3044 { 3045 struct xgbe_phy_data *phy_data = pdata->phy_data; 3046 3047 /* If we have an external PHY, free it */ 3048 xgbe_phy_free_phy_device(pdata); 3049 3050 /* Reset SFP data */ 3051 xgbe_phy_sfp_reset(phy_data); 3052 xgbe_phy_sfp_mod_absent(pdata); 3053 3054 /* Reset CDR support */ 3055 xgbe_phy_cdr_track(pdata); 3056 3057 /* Power off the PHY */ 3058 xgbe_phy_power_off(pdata); 3059 3060 /* Stop the I2C controller */ 3061 pdata->i2c_if.i2c_stop(pdata); 3062 } 3063 3064 static int xgbe_phy_start(struct xgbe_prv_data *pdata) 3065 { 3066 struct xgbe_phy_data *phy_data = pdata->phy_data; 3067 int ret; 3068 3069 /* Start the I2C controller */ 3070 ret = pdata->i2c_if.i2c_start(pdata); 3071 if (ret) 3072 return ret; 3073 3074 /* Set the proper MDIO mode for the re-driver */ 3075 if (phy_data->redrv && !phy_data->redrv_if) { 3076 ret = pdata->hw_if.set_ext_mii_mode(pdata, phy_data->redrv_addr, 3077 XGBE_MDIO_MODE_CL22); 3078 if (ret) { 3079 netdev_err(pdata->netdev, 3080 "redriver mdio port not compatible (%u)\n", 3081 phy_data->redrv_addr); 3082 return ret; 3083 } 3084 } 3085 3086 /* Start in highest supported mode */ 3087 xgbe_phy_set_mode(pdata, phy_data->start_mode); 3088 3089 /* Reset CDR support */ 3090 xgbe_phy_cdr_track(pdata); 3091 3092 /* After starting the I2C controller, we can check for an SFP */ 3093 switch (phy_data->port_mode) { 3094 case XGBE_PORT_MODE_SFP: 3095 xgbe_phy_sfp_detect(pdata); 3096 break; 3097 default: 3098 break; 3099 } 3100 3101 /* If we have an external PHY, start it */ 3102 ret = xgbe_phy_find_phy_device(pdata); 3103 if (ret) 3104 goto err_i2c; 3105 3106 return 0; 3107 3108 err_i2c: 3109 pdata->i2c_if.i2c_stop(pdata); 3110 3111 return ret; 3112 } 3113 3114 static int xgbe_phy_reset(struct xgbe_prv_data *pdata) 3115 { 3116 struct xgbe_phy_data *phy_data = pdata->phy_data; 3117 enum xgbe_mode cur_mode; 3118 int ret; 3119 3120 /* Reset by power cycling the PHY */ 3121 cur_mode = phy_data->cur_mode; 3122 xgbe_phy_power_off(pdata); 3123 xgbe_phy_set_mode(pdata, cur_mode); 3124 3125 if (!phy_data->phydev) 3126 return 0; 3127 3128 /* Reset the external PHY */ 3129 ret = xgbe_phy_mdio_reset(pdata); 3130 if (ret) 3131 return ret; 3132 3133 return phy_init_hw(phy_data->phydev); 3134 } 3135 3136 static void xgbe_phy_exit(struct xgbe_prv_data *pdata) 3137 { 3138 struct xgbe_phy_data *phy_data = pdata->phy_data; 3139 3140 /* Unregister for driving external PHYs */ 3141 mdiobus_unregister(phy_data->mii); 3142 } 3143 3144 static int xgbe_phy_init(struct xgbe_prv_data *pdata) 3145 { 3146 struct ethtool_link_ksettings *lks = &pdata->phy.lks; 3147 struct xgbe_phy_data *phy_data; 3148 struct mii_bus *mii; 3149 int ret; 3150 3151 /* Check if enabled */ 3152 if (!xgbe_phy_port_enabled(pdata)) { 3153 dev_info(pdata->dev, "device is not enabled\n"); 3154 return -ENODEV; 3155 } 3156 3157 /* Initialize the I2C controller */ 3158 ret = pdata->i2c_if.i2c_init(pdata); 3159 if (ret) 3160 return ret; 3161 3162 phy_data = devm_kzalloc(pdata->dev, sizeof(*phy_data), GFP_KERNEL); 3163 if (!phy_data) 3164 return -ENOMEM; 3165 pdata->phy_data = phy_data; 3166 3167 phy_data->port_mode = XP_GET_BITS(pdata->pp0, XP_PROP_0, PORT_MODE); 3168 phy_data->port_id = XP_GET_BITS(pdata->pp0, XP_PROP_0, PORT_ID); 3169 phy_data->port_speeds = XP_GET_BITS(pdata->pp0, XP_PROP_0, PORT_SPEEDS); 3170 phy_data->conn_type = XP_GET_BITS(pdata->pp0, XP_PROP_0, CONN_TYPE); 3171 phy_data->mdio_addr = XP_GET_BITS(pdata->pp0, XP_PROP_0, MDIO_ADDR); 3172 if (netif_msg_probe(pdata)) { 3173 dev_dbg(pdata->dev, "port mode=%u\n", phy_data->port_mode); 3174 dev_dbg(pdata->dev, "port id=%u\n", phy_data->port_id); 3175 dev_dbg(pdata->dev, "port speeds=%#x\n", phy_data->port_speeds); 3176 dev_dbg(pdata->dev, "conn type=%u\n", phy_data->conn_type); 3177 dev_dbg(pdata->dev, "mdio addr=%u\n", phy_data->mdio_addr); 3178 } 3179 3180 phy_data->redrv = XP_GET_BITS(pdata->pp4, XP_PROP_4, REDRV_PRESENT); 3181 phy_data->redrv_if = XP_GET_BITS(pdata->pp4, XP_PROP_4, REDRV_IF); 3182 phy_data->redrv_addr = XP_GET_BITS(pdata->pp4, XP_PROP_4, REDRV_ADDR); 3183 phy_data->redrv_lane = XP_GET_BITS(pdata->pp4, XP_PROP_4, REDRV_LANE); 3184 phy_data->redrv_model = XP_GET_BITS(pdata->pp4, XP_PROP_4, REDRV_MODEL); 3185 if (phy_data->redrv && netif_msg_probe(pdata)) { 3186 dev_dbg(pdata->dev, "redrv present\n"); 3187 dev_dbg(pdata->dev, "redrv i/f=%u\n", phy_data->redrv_if); 3188 dev_dbg(pdata->dev, "redrv addr=%#x\n", phy_data->redrv_addr); 3189 dev_dbg(pdata->dev, "redrv lane=%u\n", phy_data->redrv_lane); 3190 dev_dbg(pdata->dev, "redrv model=%u\n", phy_data->redrv_model); 3191 } 3192 3193 /* Validate the connection requested */ 3194 if (xgbe_phy_conn_type_mismatch(pdata)) { 3195 dev_err(pdata->dev, "phy mode/connection mismatch (%#x/%#x)\n", 3196 phy_data->port_mode, phy_data->conn_type); 3197 return -EINVAL; 3198 } 3199 3200 /* Validate the mode requested */ 3201 if (xgbe_phy_port_mode_mismatch(pdata)) { 3202 dev_err(pdata->dev, "phy mode/speed mismatch (%#x/%#x)\n", 3203 phy_data->port_mode, phy_data->port_speeds); 3204 return -EINVAL; 3205 } 3206 3207 /* Check for and validate MDIO reset support */ 3208 ret = xgbe_phy_mdio_reset_setup(pdata); 3209 if (ret) 3210 return ret; 3211 3212 /* Validate the re-driver information */ 3213 if (xgbe_phy_redrv_error(phy_data)) { 3214 dev_err(pdata->dev, "phy re-driver settings error\n"); 3215 return -EINVAL; 3216 } 3217 pdata->kr_redrv = phy_data->redrv; 3218 3219 /* Indicate current mode is unknown */ 3220 phy_data->cur_mode = XGBE_MODE_UNKNOWN; 3221 3222 /* Initialize supported features */ 3223 XGBE_ZERO_SUP(lks); 3224 3225 switch (phy_data->port_mode) { 3226 /* Backplane support */ 3227 case XGBE_PORT_MODE_BACKPLANE: 3228 XGBE_SET_SUP(lks, Autoneg); 3229 fallthrough; 3230 case XGBE_PORT_MODE_BACKPLANE_NO_AUTONEG: 3231 XGBE_SET_SUP(lks, Pause); 3232 XGBE_SET_SUP(lks, Asym_Pause); 3233 XGBE_SET_SUP(lks, Backplane); 3234 if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000) { 3235 XGBE_SET_SUP(lks, 1000baseKX_Full); 3236 phy_data->start_mode = XGBE_MODE_KX_1000; 3237 } 3238 if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_10000) { 3239 XGBE_SET_SUP(lks, 10000baseKR_Full); 3240 if (pdata->fec_ability & MDIO_PMA_10GBR_FECABLE_ABLE) 3241 XGBE_SET_SUP(lks, 10000baseR_FEC); 3242 phy_data->start_mode = XGBE_MODE_KR; 3243 } 3244 3245 phy_data->phydev_mode = XGBE_MDIO_MODE_NONE; 3246 break; 3247 case XGBE_PORT_MODE_BACKPLANE_2500: 3248 XGBE_SET_SUP(lks, Pause); 3249 XGBE_SET_SUP(lks, Asym_Pause); 3250 XGBE_SET_SUP(lks, Backplane); 3251 XGBE_SET_SUP(lks, 2500baseX_Full); 3252 phy_data->start_mode = XGBE_MODE_KX_2500; 3253 3254 phy_data->phydev_mode = XGBE_MDIO_MODE_NONE; 3255 break; 3256 3257 /* MDIO 1GBase-T support */ 3258 case XGBE_PORT_MODE_1000BASE_T: 3259 XGBE_SET_SUP(lks, Autoneg); 3260 XGBE_SET_SUP(lks, Pause); 3261 XGBE_SET_SUP(lks, Asym_Pause); 3262 XGBE_SET_SUP(lks, TP); 3263 if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_100) { 3264 XGBE_SET_SUP(lks, 100baseT_Full); 3265 phy_data->start_mode = XGBE_MODE_SGMII_100; 3266 } 3267 if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000) { 3268 XGBE_SET_SUP(lks, 1000baseT_Full); 3269 phy_data->start_mode = XGBE_MODE_SGMII_1000; 3270 } 3271 3272 phy_data->phydev_mode = XGBE_MDIO_MODE_CL22; 3273 break; 3274 3275 /* MDIO Base-X support */ 3276 case XGBE_PORT_MODE_1000BASE_X: 3277 XGBE_SET_SUP(lks, Autoneg); 3278 XGBE_SET_SUP(lks, Pause); 3279 XGBE_SET_SUP(lks, Asym_Pause); 3280 XGBE_SET_SUP(lks, FIBRE); 3281 XGBE_SET_SUP(lks, 1000baseX_Full); 3282 phy_data->start_mode = XGBE_MODE_X; 3283 3284 phy_data->phydev_mode = XGBE_MDIO_MODE_CL22; 3285 break; 3286 3287 /* MDIO NBase-T support */ 3288 case XGBE_PORT_MODE_NBASE_T: 3289 XGBE_SET_SUP(lks, Autoneg); 3290 XGBE_SET_SUP(lks, Pause); 3291 XGBE_SET_SUP(lks, Asym_Pause); 3292 XGBE_SET_SUP(lks, TP); 3293 if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_100) { 3294 XGBE_SET_SUP(lks, 100baseT_Full); 3295 phy_data->start_mode = XGBE_MODE_SGMII_100; 3296 } 3297 if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000) { 3298 XGBE_SET_SUP(lks, 1000baseT_Full); 3299 phy_data->start_mode = XGBE_MODE_SGMII_1000; 3300 } 3301 if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_2500) { 3302 XGBE_SET_SUP(lks, 2500baseT_Full); 3303 phy_data->start_mode = XGBE_MODE_KX_2500; 3304 } 3305 3306 phy_data->phydev_mode = XGBE_MDIO_MODE_CL45; 3307 break; 3308 3309 /* 10GBase-T support */ 3310 case XGBE_PORT_MODE_10GBASE_T: 3311 XGBE_SET_SUP(lks, Autoneg); 3312 XGBE_SET_SUP(lks, Pause); 3313 XGBE_SET_SUP(lks, Asym_Pause); 3314 XGBE_SET_SUP(lks, TP); 3315 if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_100) { 3316 XGBE_SET_SUP(lks, 100baseT_Full); 3317 phy_data->start_mode = XGBE_MODE_SGMII_100; 3318 } 3319 if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000) { 3320 XGBE_SET_SUP(lks, 1000baseT_Full); 3321 phy_data->start_mode = XGBE_MODE_SGMII_1000; 3322 } 3323 if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_10000) { 3324 XGBE_SET_SUP(lks, 10000baseT_Full); 3325 phy_data->start_mode = XGBE_MODE_KR; 3326 } 3327 3328 phy_data->phydev_mode = XGBE_MDIO_MODE_CL45; 3329 break; 3330 3331 /* 10GBase-R support */ 3332 case XGBE_PORT_MODE_10GBASE_R: 3333 XGBE_SET_SUP(lks, Autoneg); 3334 XGBE_SET_SUP(lks, Pause); 3335 XGBE_SET_SUP(lks, Asym_Pause); 3336 XGBE_SET_SUP(lks, FIBRE); 3337 XGBE_SET_SUP(lks, 10000baseSR_Full); 3338 XGBE_SET_SUP(lks, 10000baseLR_Full); 3339 XGBE_SET_SUP(lks, 10000baseLRM_Full); 3340 XGBE_SET_SUP(lks, 10000baseER_Full); 3341 if (pdata->fec_ability & MDIO_PMA_10GBR_FECABLE_ABLE) 3342 XGBE_SET_SUP(lks, 10000baseR_FEC); 3343 phy_data->start_mode = XGBE_MODE_SFI; 3344 3345 phy_data->phydev_mode = XGBE_MDIO_MODE_NONE; 3346 break; 3347 3348 /* SFP support */ 3349 case XGBE_PORT_MODE_SFP: 3350 XGBE_SET_SUP(lks, Autoneg); 3351 XGBE_SET_SUP(lks, Pause); 3352 XGBE_SET_SUP(lks, Asym_Pause); 3353 XGBE_SET_SUP(lks, TP); 3354 XGBE_SET_SUP(lks, FIBRE); 3355 if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_100) 3356 phy_data->start_mode = XGBE_MODE_SGMII_100; 3357 if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_1000) 3358 phy_data->start_mode = XGBE_MODE_SGMII_1000; 3359 if (phy_data->port_speeds & XGBE_PHY_PORT_SPEED_10000) 3360 phy_data->start_mode = XGBE_MODE_SFI; 3361 3362 phy_data->phydev_mode = XGBE_MDIO_MODE_CL22; 3363 3364 xgbe_phy_sfp_setup(pdata); 3365 break; 3366 default: 3367 return -EINVAL; 3368 } 3369 3370 if (netif_msg_probe(pdata)) 3371 dev_dbg(pdata->dev, "phy supported=0x%*pb\n", 3372 __ETHTOOL_LINK_MODE_MASK_NBITS, 3373 lks->link_modes.supported); 3374 3375 if ((phy_data->conn_type & XGBE_CONN_TYPE_MDIO) && 3376 (phy_data->phydev_mode != XGBE_MDIO_MODE_NONE)) { 3377 ret = pdata->hw_if.set_ext_mii_mode(pdata, phy_data->mdio_addr, 3378 phy_data->phydev_mode); 3379 if (ret) { 3380 dev_err(pdata->dev, 3381 "mdio port/clause not compatible (%d/%u)\n", 3382 phy_data->mdio_addr, phy_data->phydev_mode); 3383 return -EINVAL; 3384 } 3385 } 3386 3387 if (phy_data->redrv && !phy_data->redrv_if) { 3388 ret = pdata->hw_if.set_ext_mii_mode(pdata, phy_data->redrv_addr, 3389 XGBE_MDIO_MODE_CL22); 3390 if (ret) { 3391 dev_err(pdata->dev, 3392 "redriver mdio port not compatible (%u)\n", 3393 phy_data->redrv_addr); 3394 return -EINVAL; 3395 } 3396 } 3397 3398 phy_data->phy_cdr_delay = XGBE_CDR_DELAY_INIT; 3399 3400 /* Register for driving external PHYs */ 3401 mii = devm_mdiobus_alloc(pdata->dev); 3402 if (!mii) { 3403 dev_err(pdata->dev, "mdiobus_alloc failed\n"); 3404 return -ENOMEM; 3405 } 3406 3407 mii->priv = pdata; 3408 mii->name = "amd-xgbe-mii"; 3409 mii->read = xgbe_phy_mii_read; 3410 mii->write = xgbe_phy_mii_write; 3411 mii->parent = pdata->dev; 3412 mii->phy_mask = ~0; 3413 snprintf(mii->id, sizeof(mii->id), "%s", dev_name(pdata->dev)); 3414 ret = mdiobus_register(mii); 3415 if (ret) { 3416 dev_err(pdata->dev, "mdiobus_register failed\n"); 3417 return ret; 3418 } 3419 phy_data->mii = mii; 3420 3421 return 0; 3422 } 3423 3424 void xgbe_init_function_ptrs_phy_v2(struct xgbe_phy_if *phy_if) 3425 { 3426 struct xgbe_phy_impl_if *phy_impl = &phy_if->phy_impl; 3427 3428 phy_impl->init = xgbe_phy_init; 3429 phy_impl->exit = xgbe_phy_exit; 3430 3431 phy_impl->reset = xgbe_phy_reset; 3432 phy_impl->start = xgbe_phy_start; 3433 phy_impl->stop = xgbe_phy_stop; 3434 3435 phy_impl->link_status = xgbe_phy_link_status; 3436 3437 phy_impl->valid_speed = xgbe_phy_valid_speed; 3438 3439 phy_impl->use_mode = xgbe_phy_use_mode; 3440 phy_impl->set_mode = xgbe_phy_set_mode; 3441 phy_impl->get_mode = xgbe_phy_get_mode; 3442 phy_impl->switch_mode = xgbe_phy_switch_mode; 3443 phy_impl->cur_mode = xgbe_phy_cur_mode; 3444 3445 phy_impl->an_mode = xgbe_phy_an_mode; 3446 3447 phy_impl->an_config = xgbe_phy_an_config; 3448 3449 phy_impl->an_advertising = xgbe_phy_an_advertising; 3450 3451 phy_impl->an_outcome = xgbe_phy_an_outcome; 3452 3453 phy_impl->an_pre = xgbe_phy_an_pre; 3454 phy_impl->an_post = xgbe_phy_an_post; 3455 3456 phy_impl->kr_training_pre = xgbe_phy_kr_training_pre; 3457 phy_impl->kr_training_post = xgbe_phy_kr_training_post; 3458 3459 phy_impl->module_info = xgbe_phy_module_info; 3460 phy_impl->module_eeprom = xgbe_phy_module_eeprom; 3461 } 3462