1 /* ---------------------------------------------------------------------------- 2 Linux PCMCIA ethernet adapter driver for the New Media Ethernet LAN. 3 nmclan_cs.c,v 0.16 1995/07/01 06:42:17 rpao Exp rpao 4 5 The Ethernet LAN uses the Advanced Micro Devices (AMD) Am79C940 Media 6 Access Controller for Ethernet (MACE). It is essentially the Am2150 7 PCMCIA Ethernet card contained in the Am2150 Demo Kit. 8 9 Written by Roger C. Pao <rpao@paonet.org> 10 Copyright 1995 Roger C. Pao 11 Linux 2.5 cleanups Copyright Red Hat 2003 12 13 This software may be used and distributed according to the terms of 14 the GNU General Public License. 15 16 Ported to Linux 1.3.* network driver environment by 17 Matti Aarnio <mea@utu.fi> 18 19 References 20 21 Am2150 Technical Reference Manual, Revision 1.0, August 17, 1993 22 Am79C940 (MACE) Data Sheet, 1994 23 Am79C90 (C-LANCE) Data Sheet, 1994 24 Linux PCMCIA Programmer's Guide v1.17 25 /usr/src/linux/net/inet/dev.c, Linux kernel 1.2.8 26 27 Eric Mears, New Media Corporation 28 Tom Pollard, New Media Corporation 29 Dean Siasoyco, New Media Corporation 30 Ken Lesniak, Silicon Graphics, Inc. <lesniak@boston.sgi.com> 31 Donald Becker <becker@scyld.com> 32 David Hinds <dahinds@users.sourceforge.net> 33 34 The Linux client driver is based on the 3c589_cs.c client driver by 35 David Hinds. 36 37 The Linux network driver outline is based on the 3c589_cs.c driver, 38 the 8390.c driver, and the example skeleton.c kernel code, which are 39 by Donald Becker. 40 41 The Am2150 network driver hardware interface code is based on the 42 OS/9000 driver for the New Media Ethernet LAN by Eric Mears. 43 44 Special thanks for testing and help in debugging this driver goes 45 to Ken Lesniak. 46 47 ------------------------------------------------------------------------------- 48 Driver Notes and Issues 49 ------------------------------------------------------------------------------- 50 51 1. Developed on a Dell 320SLi 52 PCMCIA Card Services 2.6.2 53 Linux dell 1.2.10 #1 Thu Jun 29 20:23:41 PDT 1995 i386 54 55 2. rc.pcmcia may require loading pcmcia_core with io_speed=300: 56 'insmod pcmcia_core.o io_speed=300'. 57 This will avoid problems with fast systems which causes rx_framecnt 58 to return random values. 59 60 3. If hot extraction does not work for you, use 'ifconfig eth0 down' 61 before extraction. 62 63 4. There is a bad slow-down problem in this driver. 64 65 5. Future: Multicast processing. In the meantime, do _not_ compile your 66 kernel with multicast ip enabled. 67 68 ------------------------------------------------------------------------------- 69 History 70 ------------------------------------------------------------------------------- 71 Log: nmclan_cs.c,v 72 * 2.5.75-ac1 2003/07/11 Alan Cox <alan@lxorguk.ukuu.org.uk> 73 * Fixed hang on card eject as we probe it 74 * Cleaned up to use new style locking. 75 * 76 * Revision 0.16 1995/07/01 06:42:17 rpao 77 * Bug fix: nmclan_reset() called CardServices incorrectly. 78 * 79 * Revision 0.15 1995/05/24 08:09:47 rpao 80 * Re-implement MULTI_TX dev->tbusy handling. 81 * 82 * Revision 0.14 1995/05/23 03:19:30 rpao 83 * Added, in nmclan_config(), "tuple.Attributes = 0;". 84 * Modified MACE ID check to ignore chip revision level. 85 * Avoid tx_free_frames race condition between _start_xmit and _interrupt. 86 * 87 * Revision 0.13 1995/05/18 05:56:34 rpao 88 * Statistics changes. 89 * Bug fix: nmclan_reset did not enable TX and RX: call restore_multicast_list. 90 * Bug fix: mace_interrupt checks ~MACE_IMR_DEFAULT. Fixes driver lockup. 91 * 92 * Revision 0.12 1995/05/14 00:12:23 rpao 93 * Statistics overhaul. 94 * 95 96 95/05/13 rpao V0.10a 97 Bug fix: MACE statistics counters used wrong I/O ports. 98 Bug fix: mace_interrupt() needed to allow statistics to be 99 processed without RX or TX interrupts pending. 100 95/05/11 rpao V0.10 101 Multiple transmit request processing. 102 Modified statistics to use MACE counters where possible. 103 95/05/10 rpao V0.09 Bug fix: Must use IO_DATA_PATH_WIDTH_AUTO. 104 *Released 105 95/05/10 rpao V0.08 106 Bug fix: Make all non-exported functions private by using 107 static keyword. 108 Bug fix: Test IntrCnt _before_ reading MACE_IR. 109 95/05/10 rpao V0.07 Statistics. 110 95/05/09 rpao V0.06 Fix rx_framecnt problem by addition of PCIC wait states. 111 112 ---------------------------------------------------------------------------- */ 113 114 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 115 116 #define DRV_NAME "nmclan_cs" 117 #define DRV_VERSION "0.16" 118 119 120 /* ---------------------------------------------------------------------------- 121 Conditional Compilation Options 122 ---------------------------------------------------------------------------- */ 123 124 #define MULTI_TX 0 125 #define RESET_ON_TIMEOUT 1 126 #define TX_INTERRUPTABLE 1 127 #define RESET_XILINX 0 128 129 /* ---------------------------------------------------------------------------- 130 Include Files 131 ---------------------------------------------------------------------------- */ 132 133 #include <linux/module.h> 134 #include <linux/kernel.h> 135 #include <linux/ptrace.h> 136 #include <linux/slab.h> 137 #include <linux/string.h> 138 #include <linux/timer.h> 139 #include <linux/interrupt.h> 140 #include <linux/in.h> 141 #include <linux/delay.h> 142 #include <linux/ethtool.h> 143 #include <linux/netdevice.h> 144 #include <linux/etherdevice.h> 145 #include <linux/skbuff.h> 146 #include <linux/if_arp.h> 147 #include <linux/ioport.h> 148 #include <linux/bitops.h> 149 150 #include <pcmcia/cisreg.h> 151 #include <pcmcia/cistpl.h> 152 #include <pcmcia/ds.h> 153 154 #include <asm/uaccess.h> 155 #include <asm/io.h> 156 157 /* ---------------------------------------------------------------------------- 158 Defines 159 ---------------------------------------------------------------------------- */ 160 161 #define MACE_LADRF_LEN 8 162 /* 8 bytes in Logical Address Filter */ 163 164 /* Loop Control Defines */ 165 #define MACE_MAX_IR_ITERATIONS 10 166 #define MACE_MAX_RX_ITERATIONS 12 167 /* 168 TBD: Dean brought this up, and I assumed the hardware would 169 handle it: 170 171 If MACE_MAX_RX_ITERATIONS is > 1, rx_framecnt may still be 172 non-zero when the isr exits. We may not get another interrupt 173 to process the remaining packets for some time. 174 */ 175 176 /* 177 The Am2150 has a Xilinx XC3042 field programmable gate array (FPGA) 178 which manages the interface between the MACE and the PCMCIA bus. It 179 also includes buffer management for the 32K x 8 SRAM to control up to 180 four transmit and 12 receive frames at a time. 181 */ 182 #define AM2150_MAX_TX_FRAMES 4 183 #define AM2150_MAX_RX_FRAMES 12 184 185 /* Am2150 Ethernet Card I/O Mapping */ 186 #define AM2150_RCV 0x00 187 #define AM2150_XMT 0x04 188 #define AM2150_XMT_SKIP 0x09 189 #define AM2150_RCV_NEXT 0x0A 190 #define AM2150_RCV_FRAME_COUNT 0x0B 191 #define AM2150_MACE_BANK 0x0C 192 #define AM2150_MACE_BASE 0x10 193 194 /* MACE Registers */ 195 #define MACE_RCVFIFO 0 196 #define MACE_XMTFIFO 1 197 #define MACE_XMTFC 2 198 #define MACE_XMTFS 3 199 #define MACE_XMTRC 4 200 #define MACE_RCVFC 5 201 #define MACE_RCVFS 6 202 #define MACE_FIFOFC 7 203 #define MACE_IR 8 204 #define MACE_IMR 9 205 #define MACE_PR 10 206 #define MACE_BIUCC 11 207 #define MACE_FIFOCC 12 208 #define MACE_MACCC 13 209 #define MACE_PLSCC 14 210 #define MACE_PHYCC 15 211 #define MACE_CHIPIDL 16 212 #define MACE_CHIPIDH 17 213 #define MACE_IAC 18 214 /* Reserved */ 215 #define MACE_LADRF 20 216 #define MACE_PADR 21 217 /* Reserved */ 218 /* Reserved */ 219 #define MACE_MPC 24 220 /* Reserved */ 221 #define MACE_RNTPC 26 222 #define MACE_RCVCC 27 223 /* Reserved */ 224 #define MACE_UTR 29 225 #define MACE_RTR1 30 226 #define MACE_RTR2 31 227 228 /* MACE Bit Masks */ 229 #define MACE_XMTRC_EXDEF 0x80 230 #define MACE_XMTRC_XMTRC 0x0F 231 232 #define MACE_XMTFS_XMTSV 0x80 233 #define MACE_XMTFS_UFLO 0x40 234 #define MACE_XMTFS_LCOL 0x20 235 #define MACE_XMTFS_MORE 0x10 236 #define MACE_XMTFS_ONE 0x08 237 #define MACE_XMTFS_DEFER 0x04 238 #define MACE_XMTFS_LCAR 0x02 239 #define MACE_XMTFS_RTRY 0x01 240 241 #define MACE_RCVFS_RCVSTS 0xF000 242 #define MACE_RCVFS_OFLO 0x8000 243 #define MACE_RCVFS_CLSN 0x4000 244 #define MACE_RCVFS_FRAM 0x2000 245 #define MACE_RCVFS_FCS 0x1000 246 247 #define MACE_FIFOFC_RCVFC 0xF0 248 #define MACE_FIFOFC_XMTFC 0x0F 249 250 #define MACE_IR_JAB 0x80 251 #define MACE_IR_BABL 0x40 252 #define MACE_IR_CERR 0x20 253 #define MACE_IR_RCVCCO 0x10 254 #define MACE_IR_RNTPCO 0x08 255 #define MACE_IR_MPCO 0x04 256 #define MACE_IR_RCVINT 0x02 257 #define MACE_IR_XMTINT 0x01 258 259 #define MACE_MACCC_PROM 0x80 260 #define MACE_MACCC_DXMT2PD 0x40 261 #define MACE_MACCC_EMBA 0x20 262 #define MACE_MACCC_RESERVED 0x10 263 #define MACE_MACCC_DRCVPA 0x08 264 #define MACE_MACCC_DRCVBC 0x04 265 #define MACE_MACCC_ENXMT 0x02 266 #define MACE_MACCC_ENRCV 0x01 267 268 #define MACE_PHYCC_LNKFL 0x80 269 #define MACE_PHYCC_DLNKTST 0x40 270 #define MACE_PHYCC_REVPOL 0x20 271 #define MACE_PHYCC_DAPC 0x10 272 #define MACE_PHYCC_LRT 0x08 273 #define MACE_PHYCC_ASEL 0x04 274 #define MACE_PHYCC_RWAKE 0x02 275 #define MACE_PHYCC_AWAKE 0x01 276 277 #define MACE_IAC_ADDRCHG 0x80 278 #define MACE_IAC_PHYADDR 0x04 279 #define MACE_IAC_LOGADDR 0x02 280 281 #define MACE_UTR_RTRE 0x80 282 #define MACE_UTR_RTRD 0x40 283 #define MACE_UTR_RPA 0x20 284 #define MACE_UTR_FCOLL 0x10 285 #define MACE_UTR_RCVFCSE 0x08 286 #define MACE_UTR_LOOP_INCL_MENDEC 0x06 287 #define MACE_UTR_LOOP_NO_MENDEC 0x04 288 #define MACE_UTR_LOOP_EXTERNAL 0x02 289 #define MACE_UTR_LOOP_NONE 0x00 290 #define MACE_UTR_RESERVED 0x01 291 292 /* Switch MACE register bank (only 0 and 1 are valid) */ 293 #define MACEBANK(win_num) outb((win_num), ioaddr + AM2150_MACE_BANK) 294 295 #define MACE_IMR_DEFAULT \ 296 (0xFF - \ 297 ( \ 298 MACE_IR_CERR | \ 299 MACE_IR_RCVCCO | \ 300 MACE_IR_RNTPCO | \ 301 MACE_IR_MPCO | \ 302 MACE_IR_RCVINT | \ 303 MACE_IR_XMTINT \ 304 ) \ 305 ) 306 #undef MACE_IMR_DEFAULT 307 #define MACE_IMR_DEFAULT 0x00 /* New statistics handling: grab everything */ 308 309 #define TX_TIMEOUT ((400*HZ)/1000) 310 311 /* ---------------------------------------------------------------------------- 312 Type Definitions 313 ---------------------------------------------------------------------------- */ 314 315 typedef struct _mace_statistics { 316 /* MACE_XMTFS */ 317 int xmtsv; 318 int uflo; 319 int lcol; 320 int more; 321 int one; 322 int defer; 323 int lcar; 324 int rtry; 325 326 /* MACE_XMTRC */ 327 int exdef; 328 int xmtrc; 329 330 /* RFS1--Receive Status (RCVSTS) */ 331 int oflo; 332 int clsn; 333 int fram; 334 int fcs; 335 336 /* RFS2--Runt Packet Count (RNTPC) */ 337 int rfs_rntpc; 338 339 /* RFS3--Receive Collision Count (RCVCC) */ 340 int rfs_rcvcc; 341 342 /* MACE_IR */ 343 int jab; 344 int babl; 345 int cerr; 346 int rcvcco; 347 int rntpco; 348 int mpco; 349 350 /* MACE_MPC */ 351 int mpc; 352 353 /* MACE_RNTPC */ 354 int rntpc; 355 356 /* MACE_RCVCC */ 357 int rcvcc; 358 } mace_statistics; 359 360 typedef struct _mace_private { 361 struct pcmcia_device *p_dev; 362 struct net_device_stats linux_stats; /* Linux statistics counters */ 363 mace_statistics mace_stats; /* MACE chip statistics counters */ 364 365 /* restore_multicast_list() state variables */ 366 int multicast_ladrf[MACE_LADRF_LEN]; /* Logical address filter */ 367 int multicast_num_addrs; 368 369 char tx_free_frames; /* Number of free transmit frame buffers */ 370 char tx_irq_disabled; /* MACE TX interrupt disabled */ 371 372 spinlock_t bank_lock; /* Must be held if you step off bank 0 */ 373 } mace_private; 374 375 /* ---------------------------------------------------------------------------- 376 Private Global Variables 377 ---------------------------------------------------------------------------- */ 378 379 static const char *if_names[]={ 380 "Auto", "10baseT", "BNC", 381 }; 382 383 /* ---------------------------------------------------------------------------- 384 Parameters 385 These are the parameters that can be set during loading with 386 'insmod'. 387 ---------------------------------------------------------------------------- */ 388 389 MODULE_DESCRIPTION("New Media PCMCIA ethernet driver"); 390 MODULE_LICENSE("GPL"); 391 392 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0) 393 394 /* 0=auto, 1=10baseT, 2 = 10base2, default=auto */ 395 INT_MODULE_PARM(if_port, 0); 396 397 398 /* ---------------------------------------------------------------------------- 399 Function Prototypes 400 ---------------------------------------------------------------------------- */ 401 402 static int nmclan_config(struct pcmcia_device *link); 403 static void nmclan_release(struct pcmcia_device *link); 404 405 static void nmclan_reset(struct net_device *dev); 406 static int mace_config(struct net_device *dev, struct ifmap *map); 407 static int mace_open(struct net_device *dev); 408 static int mace_close(struct net_device *dev); 409 static netdev_tx_t mace_start_xmit(struct sk_buff *skb, 410 struct net_device *dev); 411 static void mace_tx_timeout(struct net_device *dev); 412 static irqreturn_t mace_interrupt(int irq, void *dev_id); 413 static struct net_device_stats *mace_get_stats(struct net_device *dev); 414 static int mace_rx(struct net_device *dev, unsigned char RxCnt); 415 static void restore_multicast_list(struct net_device *dev); 416 static void set_multicast_list(struct net_device *dev); 417 static const struct ethtool_ops netdev_ethtool_ops; 418 419 420 static void nmclan_detach(struct pcmcia_device *p_dev); 421 422 static const struct net_device_ops mace_netdev_ops = { 423 .ndo_open = mace_open, 424 .ndo_stop = mace_close, 425 .ndo_start_xmit = mace_start_xmit, 426 .ndo_tx_timeout = mace_tx_timeout, 427 .ndo_set_config = mace_config, 428 .ndo_get_stats = mace_get_stats, 429 .ndo_set_rx_mode = set_multicast_list, 430 .ndo_change_mtu = eth_change_mtu, 431 .ndo_set_mac_address = eth_mac_addr, 432 .ndo_validate_addr = eth_validate_addr, 433 }; 434 435 static int nmclan_probe(struct pcmcia_device *link) 436 { 437 mace_private *lp; 438 struct net_device *dev; 439 440 dev_dbg(&link->dev, "nmclan_attach()\n"); 441 442 /* Create new ethernet device */ 443 dev = alloc_etherdev(sizeof(mace_private)); 444 if (!dev) 445 return -ENOMEM; 446 lp = netdev_priv(dev); 447 lp->p_dev = link; 448 link->priv = dev; 449 450 spin_lock_init(&lp->bank_lock); 451 link->resource[0]->end = 32; 452 link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; 453 link->config_flags |= CONF_ENABLE_IRQ; 454 link->config_index = 1; 455 link->config_regs = PRESENT_OPTION; 456 457 lp->tx_free_frames=AM2150_MAX_TX_FRAMES; 458 459 dev->netdev_ops = &mace_netdev_ops; 460 dev->ethtool_ops = &netdev_ethtool_ops; 461 dev->watchdog_timeo = TX_TIMEOUT; 462 463 return nmclan_config(link); 464 } /* nmclan_attach */ 465 466 static void nmclan_detach(struct pcmcia_device *link) 467 { 468 struct net_device *dev = link->priv; 469 470 dev_dbg(&link->dev, "nmclan_detach\n"); 471 472 unregister_netdev(dev); 473 474 nmclan_release(link); 475 476 free_netdev(dev); 477 } /* nmclan_detach */ 478 479 /* ---------------------------------------------------------------------------- 480 mace_read 481 Reads a MACE register. This is bank independent; however, the 482 caller must ensure that this call is not interruptable. We are 483 assuming that during normal operation, the MACE is always in 484 bank 0. 485 ---------------------------------------------------------------------------- */ 486 static int mace_read(mace_private *lp, unsigned int ioaddr, int reg) 487 { 488 int data = 0xFF; 489 unsigned long flags; 490 491 switch (reg >> 4) { 492 case 0: /* register 0-15 */ 493 data = inb(ioaddr + AM2150_MACE_BASE + reg); 494 break; 495 case 1: /* register 16-31 */ 496 spin_lock_irqsave(&lp->bank_lock, flags); 497 MACEBANK(1); 498 data = inb(ioaddr + AM2150_MACE_BASE + (reg & 0x0F)); 499 MACEBANK(0); 500 spin_unlock_irqrestore(&lp->bank_lock, flags); 501 break; 502 } 503 return data & 0xFF; 504 } /* mace_read */ 505 506 /* ---------------------------------------------------------------------------- 507 mace_write 508 Writes to a MACE register. This is bank independent; however, 509 the caller must ensure that this call is not interruptable. We 510 are assuming that during normal operation, the MACE is always in 511 bank 0. 512 ---------------------------------------------------------------------------- */ 513 static void mace_write(mace_private *lp, unsigned int ioaddr, int reg, 514 int data) 515 { 516 unsigned long flags; 517 518 switch (reg >> 4) { 519 case 0: /* register 0-15 */ 520 outb(data & 0xFF, ioaddr + AM2150_MACE_BASE + reg); 521 break; 522 case 1: /* register 16-31 */ 523 spin_lock_irqsave(&lp->bank_lock, flags); 524 MACEBANK(1); 525 outb(data & 0xFF, ioaddr + AM2150_MACE_BASE + (reg & 0x0F)); 526 MACEBANK(0); 527 spin_unlock_irqrestore(&lp->bank_lock, flags); 528 break; 529 } 530 } /* mace_write */ 531 532 /* ---------------------------------------------------------------------------- 533 mace_init 534 Resets the MACE chip. 535 ---------------------------------------------------------------------------- */ 536 static int mace_init(mace_private *lp, unsigned int ioaddr, char *enet_addr) 537 { 538 int i; 539 int ct = 0; 540 541 /* MACE Software reset */ 542 mace_write(lp, ioaddr, MACE_BIUCC, 1); 543 while (mace_read(lp, ioaddr, MACE_BIUCC) & 0x01) { 544 /* Wait for reset bit to be cleared automatically after <= 200ns */; 545 if(++ct > 500) 546 { 547 pr_err("reset failed, card removed?\n"); 548 return -1; 549 } 550 udelay(1); 551 } 552 mace_write(lp, ioaddr, MACE_BIUCC, 0); 553 554 /* The Am2150 requires that the MACE FIFOs operate in burst mode. */ 555 mace_write(lp, ioaddr, MACE_FIFOCC, 0x0F); 556 557 mace_write(lp,ioaddr, MACE_RCVFC, 0); /* Disable Auto Strip Receive */ 558 mace_write(lp, ioaddr, MACE_IMR, 0xFF); /* Disable all interrupts until _open */ 559 560 /* 561 * Bit 2-1 PORTSEL[1-0] Port Select. 562 * 00 AUI/10Base-2 563 * 01 10Base-T 564 * 10 DAI Port (reserved in Am2150) 565 * 11 GPSI 566 * For this card, only the first two are valid. 567 * So, PLSCC should be set to 568 * 0x00 for 10Base-2 569 * 0x02 for 10Base-T 570 * Or just set ASEL in PHYCC below! 571 */ 572 switch (if_port) { 573 case 1: 574 mace_write(lp, ioaddr, MACE_PLSCC, 0x02); 575 break; 576 case 2: 577 mace_write(lp, ioaddr, MACE_PLSCC, 0x00); 578 break; 579 default: 580 mace_write(lp, ioaddr, MACE_PHYCC, /* ASEL */ 4); 581 /* ASEL Auto Select. When set, the PORTSEL[1-0] bits are overridden, 582 and the MACE device will automatically select the operating media 583 interface port. */ 584 break; 585 } 586 587 mace_write(lp, ioaddr, MACE_IAC, MACE_IAC_ADDRCHG | MACE_IAC_PHYADDR); 588 /* Poll ADDRCHG bit */ 589 ct = 0; 590 while (mace_read(lp, ioaddr, MACE_IAC) & MACE_IAC_ADDRCHG) 591 { 592 if(++ ct > 500) 593 { 594 pr_err("ADDRCHG timeout, card removed?\n"); 595 return -1; 596 } 597 } 598 /* Set PADR register */ 599 for (i = 0; i < ETH_ALEN; i++) 600 mace_write(lp, ioaddr, MACE_PADR, enet_addr[i]); 601 602 /* MAC Configuration Control Register should be written last */ 603 /* Let set_multicast_list set this. */ 604 /* mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV); */ 605 mace_write(lp, ioaddr, MACE_MACCC, 0x00); 606 return 0; 607 } /* mace_init */ 608 609 static int nmclan_config(struct pcmcia_device *link) 610 { 611 struct net_device *dev = link->priv; 612 mace_private *lp = netdev_priv(dev); 613 u8 *buf; 614 size_t len; 615 int i, ret; 616 unsigned int ioaddr; 617 618 dev_dbg(&link->dev, "nmclan_config\n"); 619 620 link->io_lines = 5; 621 ret = pcmcia_request_io(link); 622 if (ret) 623 goto failed; 624 ret = pcmcia_request_irq(link, mace_interrupt); 625 if (ret) 626 goto failed; 627 ret = pcmcia_enable_device(link); 628 if (ret) 629 goto failed; 630 631 dev->irq = link->irq; 632 dev->base_addr = link->resource[0]->start; 633 634 ioaddr = dev->base_addr; 635 636 /* Read the ethernet address from the CIS. */ 637 len = pcmcia_get_tuple(link, 0x80, &buf); 638 if (!buf || len < ETH_ALEN) { 639 kfree(buf); 640 goto failed; 641 } 642 memcpy(dev->dev_addr, buf, ETH_ALEN); 643 kfree(buf); 644 645 /* Verify configuration by reading the MACE ID. */ 646 { 647 char sig[2]; 648 649 sig[0] = mace_read(lp, ioaddr, MACE_CHIPIDL); 650 sig[1] = mace_read(lp, ioaddr, MACE_CHIPIDH); 651 if ((sig[0] == 0x40) && ((sig[1] & 0x0F) == 0x09)) { 652 dev_dbg(&link->dev, "nmclan_cs configured: mace id=%x %x\n", 653 sig[0], sig[1]); 654 } else { 655 pr_notice("mace id not found: %x %x should be 0x40 0x?9\n", 656 sig[0], sig[1]); 657 return -ENODEV; 658 } 659 } 660 661 if(mace_init(lp, ioaddr, dev->dev_addr) == -1) 662 goto failed; 663 664 /* The if_port symbol can be set when the module is loaded */ 665 if (if_port <= 2) 666 dev->if_port = if_port; 667 else 668 pr_notice("invalid if_port requested\n"); 669 670 SET_NETDEV_DEV(dev, &link->dev); 671 672 i = register_netdev(dev); 673 if (i != 0) { 674 pr_notice("register_netdev() failed\n"); 675 goto failed; 676 } 677 678 netdev_info(dev, "nmclan: port %#3lx, irq %d, %s port, hw_addr %pM\n", 679 dev->base_addr, dev->irq, if_names[dev->if_port], dev->dev_addr); 680 return 0; 681 682 failed: 683 nmclan_release(link); 684 return -ENODEV; 685 } /* nmclan_config */ 686 687 static void nmclan_release(struct pcmcia_device *link) 688 { 689 dev_dbg(&link->dev, "nmclan_release\n"); 690 pcmcia_disable_device(link); 691 } 692 693 static int nmclan_suspend(struct pcmcia_device *link) 694 { 695 struct net_device *dev = link->priv; 696 697 if (link->open) 698 netif_device_detach(dev); 699 700 return 0; 701 } 702 703 static int nmclan_resume(struct pcmcia_device *link) 704 { 705 struct net_device *dev = link->priv; 706 707 if (link->open) { 708 nmclan_reset(dev); 709 netif_device_attach(dev); 710 } 711 712 return 0; 713 } 714 715 716 /* ---------------------------------------------------------------------------- 717 nmclan_reset 718 Reset and restore all of the Xilinx and MACE registers. 719 ---------------------------------------------------------------------------- */ 720 static void nmclan_reset(struct net_device *dev) 721 { 722 mace_private *lp = netdev_priv(dev); 723 724 #if RESET_XILINX 725 struct pcmcia_device *link = &lp->link; 726 u8 OrigCorValue; 727 728 /* Save original COR value */ 729 pcmcia_read_config_byte(link, CISREG_COR, &OrigCorValue); 730 731 /* Reset Xilinx */ 732 dev_dbg(&link->dev, "nmclan_reset: OrigCorValue=0x%x, resetting...\n", 733 OrigCorValue); 734 pcmcia_write_config_byte(link, CISREG_COR, COR_SOFT_RESET); 735 /* Need to wait for 20 ms for PCMCIA to finish reset. */ 736 737 /* Restore original COR configuration index */ 738 pcmcia_write_config_byte(link, CISREG_COR, 739 (COR_LEVEL_REQ | (OrigCorValue & COR_CONFIG_MASK))); 740 /* Xilinx is now completely reset along with the MACE chip. */ 741 lp->tx_free_frames=AM2150_MAX_TX_FRAMES; 742 743 #endif /* #if RESET_XILINX */ 744 745 /* Xilinx is now completely reset along with the MACE chip. */ 746 lp->tx_free_frames=AM2150_MAX_TX_FRAMES; 747 748 /* Reinitialize the MACE chip for operation. */ 749 mace_init(lp, dev->base_addr, dev->dev_addr); 750 mace_write(lp, dev->base_addr, MACE_IMR, MACE_IMR_DEFAULT); 751 752 /* Restore the multicast list and enable TX and RX. */ 753 restore_multicast_list(dev); 754 } /* nmclan_reset */ 755 756 /* ---------------------------------------------------------------------------- 757 mace_config 758 [Someone tell me what this is supposed to do? Is if_port a defined 759 standard? If so, there should be defines to indicate 1=10Base-T, 760 2=10Base-2, etc. including limited automatic detection.] 761 ---------------------------------------------------------------------------- */ 762 static int mace_config(struct net_device *dev, struct ifmap *map) 763 { 764 if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) { 765 if (map->port <= 2) { 766 dev->if_port = map->port; 767 netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]); 768 } else 769 return -EINVAL; 770 } 771 return 0; 772 } /* mace_config */ 773 774 /* ---------------------------------------------------------------------------- 775 mace_open 776 Open device driver. 777 ---------------------------------------------------------------------------- */ 778 static int mace_open(struct net_device *dev) 779 { 780 unsigned int ioaddr = dev->base_addr; 781 mace_private *lp = netdev_priv(dev); 782 struct pcmcia_device *link = lp->p_dev; 783 784 if (!pcmcia_dev_present(link)) 785 return -ENODEV; 786 787 link->open++; 788 789 MACEBANK(0); 790 791 netif_start_queue(dev); 792 nmclan_reset(dev); 793 794 return 0; /* Always succeed */ 795 } /* mace_open */ 796 797 /* ---------------------------------------------------------------------------- 798 mace_close 799 Closes device driver. 800 ---------------------------------------------------------------------------- */ 801 static int mace_close(struct net_device *dev) 802 { 803 unsigned int ioaddr = dev->base_addr; 804 mace_private *lp = netdev_priv(dev); 805 struct pcmcia_device *link = lp->p_dev; 806 807 dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name); 808 809 /* Mask off all interrupts from the MACE chip. */ 810 outb(0xFF, ioaddr + AM2150_MACE_BASE + MACE_IMR); 811 812 link->open--; 813 netif_stop_queue(dev); 814 815 return 0; 816 } /* mace_close */ 817 818 static void netdev_get_drvinfo(struct net_device *dev, 819 struct ethtool_drvinfo *info) 820 { 821 strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); 822 strlcpy(info->version, DRV_VERSION, sizeof(info->version)); 823 snprintf(info->bus_info, sizeof(info->bus_info), 824 "PCMCIA 0x%lx", dev->base_addr); 825 } 826 827 static const struct ethtool_ops netdev_ethtool_ops = { 828 .get_drvinfo = netdev_get_drvinfo, 829 }; 830 831 /* ---------------------------------------------------------------------------- 832 mace_start_xmit 833 This routine begins the packet transmit function. When completed, 834 it will generate a transmit interrupt. 835 836 According to /usr/src/linux/net/inet/dev.c, if _start_xmit 837 returns 0, the "packet is now solely the responsibility of the 838 driver." If _start_xmit returns non-zero, the "transmission 839 failed, put skb back into a list." 840 ---------------------------------------------------------------------------- */ 841 842 static void mace_tx_timeout(struct net_device *dev) 843 { 844 mace_private *lp = netdev_priv(dev); 845 struct pcmcia_device *link = lp->p_dev; 846 847 netdev_notice(dev, "transmit timed out -- "); 848 #if RESET_ON_TIMEOUT 849 pr_cont("resetting card\n"); 850 pcmcia_reset_card(link->socket); 851 #else /* #if RESET_ON_TIMEOUT */ 852 pr_cont("NOT resetting card\n"); 853 #endif /* #if RESET_ON_TIMEOUT */ 854 dev->trans_start = jiffies; /* prevent tx timeout */ 855 netif_wake_queue(dev); 856 } 857 858 static netdev_tx_t mace_start_xmit(struct sk_buff *skb, 859 struct net_device *dev) 860 { 861 mace_private *lp = netdev_priv(dev); 862 unsigned int ioaddr = dev->base_addr; 863 864 netif_stop_queue(dev); 865 866 pr_debug("%s: mace_start_xmit(length = %ld) called.\n", 867 dev->name, (long)skb->len); 868 869 #if (!TX_INTERRUPTABLE) 870 /* Disable MACE TX interrupts. */ 871 outb(MACE_IMR_DEFAULT | MACE_IR_XMTINT, 872 ioaddr + AM2150_MACE_BASE + MACE_IMR); 873 lp->tx_irq_disabled=1; 874 #endif /* #if (!TX_INTERRUPTABLE) */ 875 876 { 877 /* This block must not be interrupted by another transmit request! 878 mace_tx_timeout will take care of timer-based retransmissions from 879 the upper layers. The interrupt handler is guaranteed never to 880 service a transmit interrupt while we are in here. 881 */ 882 883 lp->linux_stats.tx_bytes += skb->len; 884 lp->tx_free_frames--; 885 886 /* WARNING: Write the _exact_ number of bytes written in the header! */ 887 /* Put out the word header [must be an outw()] . . . */ 888 outw(skb->len, ioaddr + AM2150_XMT); 889 /* . . . and the packet [may be any combination of outw() and outb()] */ 890 outsw(ioaddr + AM2150_XMT, skb->data, skb->len >> 1); 891 if (skb->len & 1) { 892 /* Odd byte transfer */ 893 outb(skb->data[skb->len-1], ioaddr + AM2150_XMT); 894 } 895 896 #if MULTI_TX 897 if (lp->tx_free_frames > 0) 898 netif_start_queue(dev); 899 #endif /* #if MULTI_TX */ 900 } 901 902 #if (!TX_INTERRUPTABLE) 903 /* Re-enable MACE TX interrupts. */ 904 lp->tx_irq_disabled=0; 905 outb(MACE_IMR_DEFAULT, ioaddr + AM2150_MACE_BASE + MACE_IMR); 906 #endif /* #if (!TX_INTERRUPTABLE) */ 907 908 dev_kfree_skb(skb); 909 910 return NETDEV_TX_OK; 911 } /* mace_start_xmit */ 912 913 /* ---------------------------------------------------------------------------- 914 mace_interrupt 915 The interrupt handler. 916 ---------------------------------------------------------------------------- */ 917 static irqreturn_t mace_interrupt(int irq, void *dev_id) 918 { 919 struct net_device *dev = (struct net_device *) dev_id; 920 mace_private *lp = netdev_priv(dev); 921 unsigned int ioaddr; 922 int status; 923 int IntrCnt = MACE_MAX_IR_ITERATIONS; 924 925 if (dev == NULL) { 926 pr_debug("mace_interrupt(): irq 0x%X for unknown device.\n", 927 irq); 928 return IRQ_NONE; 929 } 930 931 ioaddr = dev->base_addr; 932 933 if (lp->tx_irq_disabled) { 934 const char *msg; 935 if (lp->tx_irq_disabled) 936 msg = "Interrupt with tx_irq_disabled"; 937 else 938 msg = "Re-entering the interrupt handler"; 939 netdev_notice(dev, "%s [isr=%02X, imr=%02X]\n", 940 msg, 941 inb(ioaddr + AM2150_MACE_BASE + MACE_IR), 942 inb(ioaddr + AM2150_MACE_BASE + MACE_IMR)); 943 /* WARNING: MACE_IR has been read! */ 944 return IRQ_NONE; 945 } 946 947 if (!netif_device_present(dev)) { 948 netdev_dbg(dev, "interrupt from dead card\n"); 949 return IRQ_NONE; 950 } 951 952 do { 953 /* WARNING: MACE_IR is a READ/CLEAR port! */ 954 status = inb(ioaddr + AM2150_MACE_BASE + MACE_IR); 955 956 pr_debug("mace_interrupt: irq 0x%X status 0x%X.\n", irq, status); 957 958 if (status & MACE_IR_RCVINT) { 959 mace_rx(dev, MACE_MAX_RX_ITERATIONS); 960 } 961 962 if (status & MACE_IR_XMTINT) { 963 unsigned char fifofc; 964 unsigned char xmtrc; 965 unsigned char xmtfs; 966 967 fifofc = inb(ioaddr + AM2150_MACE_BASE + MACE_FIFOFC); 968 if ((fifofc & MACE_FIFOFC_XMTFC)==0) { 969 lp->linux_stats.tx_errors++; 970 outb(0xFF, ioaddr + AM2150_XMT_SKIP); 971 } 972 973 /* Transmit Retry Count (XMTRC, reg 4) */ 974 xmtrc = inb(ioaddr + AM2150_MACE_BASE + MACE_XMTRC); 975 if (xmtrc & MACE_XMTRC_EXDEF) lp->mace_stats.exdef++; 976 lp->mace_stats.xmtrc += (xmtrc & MACE_XMTRC_XMTRC); 977 978 if ( 979 (xmtfs = inb(ioaddr + AM2150_MACE_BASE + MACE_XMTFS)) & 980 MACE_XMTFS_XMTSV /* Transmit Status Valid */ 981 ) { 982 lp->mace_stats.xmtsv++; 983 984 if (xmtfs & ~MACE_XMTFS_XMTSV) { 985 if (xmtfs & MACE_XMTFS_UFLO) { 986 /* Underflow. Indicates that the Transmit FIFO emptied before 987 the end of frame was reached. */ 988 lp->mace_stats.uflo++; 989 } 990 if (xmtfs & MACE_XMTFS_LCOL) { 991 /* Late Collision */ 992 lp->mace_stats.lcol++; 993 } 994 if (xmtfs & MACE_XMTFS_MORE) { 995 /* MORE than one retry was needed */ 996 lp->mace_stats.more++; 997 } 998 if (xmtfs & MACE_XMTFS_ONE) { 999 /* Exactly ONE retry occurred */ 1000 lp->mace_stats.one++; 1001 } 1002 if (xmtfs & MACE_XMTFS_DEFER) { 1003 /* Transmission was defered */ 1004 lp->mace_stats.defer++; 1005 } 1006 if (xmtfs & MACE_XMTFS_LCAR) { 1007 /* Loss of carrier */ 1008 lp->mace_stats.lcar++; 1009 } 1010 if (xmtfs & MACE_XMTFS_RTRY) { 1011 /* Retry error: transmit aborted after 16 attempts */ 1012 lp->mace_stats.rtry++; 1013 } 1014 } /* if (xmtfs & ~MACE_XMTFS_XMTSV) */ 1015 1016 } /* if (xmtfs & MACE_XMTFS_XMTSV) */ 1017 1018 lp->linux_stats.tx_packets++; 1019 lp->tx_free_frames++; 1020 netif_wake_queue(dev); 1021 } /* if (status & MACE_IR_XMTINT) */ 1022 1023 if (status & ~MACE_IMR_DEFAULT & ~MACE_IR_RCVINT & ~MACE_IR_XMTINT) { 1024 if (status & MACE_IR_JAB) { 1025 /* Jabber Error. Excessive transmit duration (20-150ms). */ 1026 lp->mace_stats.jab++; 1027 } 1028 if (status & MACE_IR_BABL) { 1029 /* Babble Error. >1518 bytes transmitted. */ 1030 lp->mace_stats.babl++; 1031 } 1032 if (status & MACE_IR_CERR) { 1033 /* Collision Error. CERR indicates the absence of the 1034 Signal Quality Error Test message after a packet 1035 transmission. */ 1036 lp->mace_stats.cerr++; 1037 } 1038 if (status & MACE_IR_RCVCCO) { 1039 /* Receive Collision Count Overflow; */ 1040 lp->mace_stats.rcvcco++; 1041 } 1042 if (status & MACE_IR_RNTPCO) { 1043 /* Runt Packet Count Overflow */ 1044 lp->mace_stats.rntpco++; 1045 } 1046 if (status & MACE_IR_MPCO) { 1047 /* Missed Packet Count Overflow */ 1048 lp->mace_stats.mpco++; 1049 } 1050 } /* if (status & ~MACE_IMR_DEFAULT & ~MACE_IR_RCVINT & ~MACE_IR_XMTINT) */ 1051 1052 } while ((status & ~MACE_IMR_DEFAULT) && (--IntrCnt)); 1053 1054 return IRQ_HANDLED; 1055 } /* mace_interrupt */ 1056 1057 /* ---------------------------------------------------------------------------- 1058 mace_rx 1059 Receives packets. 1060 ---------------------------------------------------------------------------- */ 1061 static int mace_rx(struct net_device *dev, unsigned char RxCnt) 1062 { 1063 mace_private *lp = netdev_priv(dev); 1064 unsigned int ioaddr = dev->base_addr; 1065 unsigned char rx_framecnt; 1066 unsigned short rx_status; 1067 1068 while ( 1069 ((rx_framecnt = inb(ioaddr + AM2150_RCV_FRAME_COUNT)) > 0) && 1070 (rx_framecnt <= 12) && /* rx_framecnt==0xFF if card is extracted. */ 1071 (RxCnt--) 1072 ) { 1073 rx_status = inw(ioaddr + AM2150_RCV); 1074 1075 pr_debug("%s: in mace_rx(), framecnt 0x%X, rx_status" 1076 " 0x%X.\n", dev->name, rx_framecnt, rx_status); 1077 1078 if (rx_status & MACE_RCVFS_RCVSTS) { /* Error, update stats. */ 1079 lp->linux_stats.rx_errors++; 1080 if (rx_status & MACE_RCVFS_OFLO) { 1081 lp->mace_stats.oflo++; 1082 } 1083 if (rx_status & MACE_RCVFS_CLSN) { 1084 lp->mace_stats.clsn++; 1085 } 1086 if (rx_status & MACE_RCVFS_FRAM) { 1087 lp->mace_stats.fram++; 1088 } 1089 if (rx_status & MACE_RCVFS_FCS) { 1090 lp->mace_stats.fcs++; 1091 } 1092 } else { 1093 short pkt_len = (rx_status & ~MACE_RCVFS_RCVSTS) - 4; 1094 /* Auto Strip is off, always subtract 4 */ 1095 struct sk_buff *skb; 1096 1097 lp->mace_stats.rfs_rntpc += inb(ioaddr + AM2150_RCV); 1098 /* runt packet count */ 1099 lp->mace_stats.rfs_rcvcc += inb(ioaddr + AM2150_RCV); 1100 /* rcv collision count */ 1101 1102 pr_debug(" receiving packet size 0x%X rx_status" 1103 " 0x%X.\n", pkt_len, rx_status); 1104 1105 skb = netdev_alloc_skb(dev, pkt_len + 2); 1106 1107 if (skb != NULL) { 1108 skb_reserve(skb, 2); 1109 insw(ioaddr + AM2150_RCV, skb_put(skb, pkt_len), pkt_len>>1); 1110 if (pkt_len & 1) 1111 *(skb_tail_pointer(skb) - 1) = inb(ioaddr + AM2150_RCV); 1112 skb->protocol = eth_type_trans(skb, dev); 1113 1114 netif_rx(skb); /* Send the packet to the upper (protocol) layers. */ 1115 1116 lp->linux_stats.rx_packets++; 1117 lp->linux_stats.rx_bytes += pkt_len; 1118 outb(0xFF, ioaddr + AM2150_RCV_NEXT); /* skip to next frame */ 1119 continue; 1120 } else { 1121 pr_debug("%s: couldn't allocate a sk_buff of size" 1122 " %d.\n", dev->name, pkt_len); 1123 lp->linux_stats.rx_dropped++; 1124 } 1125 } 1126 outb(0xFF, ioaddr + AM2150_RCV_NEXT); /* skip to next frame */ 1127 } /* while */ 1128 1129 return 0; 1130 } /* mace_rx */ 1131 1132 /* ---------------------------------------------------------------------------- 1133 pr_linux_stats 1134 ---------------------------------------------------------------------------- */ 1135 static void pr_linux_stats(struct net_device_stats *pstats) 1136 { 1137 pr_debug("pr_linux_stats\n"); 1138 pr_debug(" rx_packets=%-7ld tx_packets=%ld\n", 1139 (long)pstats->rx_packets, (long)pstats->tx_packets); 1140 pr_debug(" rx_errors=%-7ld tx_errors=%ld\n", 1141 (long)pstats->rx_errors, (long)pstats->tx_errors); 1142 pr_debug(" rx_dropped=%-7ld tx_dropped=%ld\n", 1143 (long)pstats->rx_dropped, (long)pstats->tx_dropped); 1144 pr_debug(" multicast=%-7ld collisions=%ld\n", 1145 (long)pstats->multicast, (long)pstats->collisions); 1146 1147 pr_debug(" rx_length_errors=%-7ld rx_over_errors=%ld\n", 1148 (long)pstats->rx_length_errors, (long)pstats->rx_over_errors); 1149 pr_debug(" rx_crc_errors=%-7ld rx_frame_errors=%ld\n", 1150 (long)pstats->rx_crc_errors, (long)pstats->rx_frame_errors); 1151 pr_debug(" rx_fifo_errors=%-7ld rx_missed_errors=%ld\n", 1152 (long)pstats->rx_fifo_errors, (long)pstats->rx_missed_errors); 1153 1154 pr_debug(" tx_aborted_errors=%-7ld tx_carrier_errors=%ld\n", 1155 (long)pstats->tx_aborted_errors, (long)pstats->tx_carrier_errors); 1156 pr_debug(" tx_fifo_errors=%-7ld tx_heartbeat_errors=%ld\n", 1157 (long)pstats->tx_fifo_errors, (long)pstats->tx_heartbeat_errors); 1158 pr_debug(" tx_window_errors=%ld\n", 1159 (long)pstats->tx_window_errors); 1160 } /* pr_linux_stats */ 1161 1162 /* ---------------------------------------------------------------------------- 1163 pr_mace_stats 1164 ---------------------------------------------------------------------------- */ 1165 static void pr_mace_stats(mace_statistics *pstats) 1166 { 1167 pr_debug("pr_mace_stats\n"); 1168 1169 pr_debug(" xmtsv=%-7d uflo=%d\n", 1170 pstats->xmtsv, pstats->uflo); 1171 pr_debug(" lcol=%-7d more=%d\n", 1172 pstats->lcol, pstats->more); 1173 pr_debug(" one=%-7d defer=%d\n", 1174 pstats->one, pstats->defer); 1175 pr_debug(" lcar=%-7d rtry=%d\n", 1176 pstats->lcar, pstats->rtry); 1177 1178 /* MACE_XMTRC */ 1179 pr_debug(" exdef=%-7d xmtrc=%d\n", 1180 pstats->exdef, pstats->xmtrc); 1181 1182 /* RFS1--Receive Status (RCVSTS) */ 1183 pr_debug(" oflo=%-7d clsn=%d\n", 1184 pstats->oflo, pstats->clsn); 1185 pr_debug(" fram=%-7d fcs=%d\n", 1186 pstats->fram, pstats->fcs); 1187 1188 /* RFS2--Runt Packet Count (RNTPC) */ 1189 /* RFS3--Receive Collision Count (RCVCC) */ 1190 pr_debug(" rfs_rntpc=%-7d rfs_rcvcc=%d\n", 1191 pstats->rfs_rntpc, pstats->rfs_rcvcc); 1192 1193 /* MACE_IR */ 1194 pr_debug(" jab=%-7d babl=%d\n", 1195 pstats->jab, pstats->babl); 1196 pr_debug(" cerr=%-7d rcvcco=%d\n", 1197 pstats->cerr, pstats->rcvcco); 1198 pr_debug(" rntpco=%-7d mpco=%d\n", 1199 pstats->rntpco, pstats->mpco); 1200 1201 /* MACE_MPC */ 1202 pr_debug(" mpc=%d\n", pstats->mpc); 1203 1204 /* MACE_RNTPC */ 1205 pr_debug(" rntpc=%d\n", pstats->rntpc); 1206 1207 /* MACE_RCVCC */ 1208 pr_debug(" rcvcc=%d\n", pstats->rcvcc); 1209 1210 } /* pr_mace_stats */ 1211 1212 /* ---------------------------------------------------------------------------- 1213 update_stats 1214 Update statistics. We change to register window 1, so this 1215 should be run single-threaded if the device is active. This is 1216 expected to be a rare operation, and it's simpler for the rest 1217 of the driver to assume that window 0 is always valid rather 1218 than use a special window-state variable. 1219 1220 oflo & uflo should _never_ occur since it would mean the Xilinx 1221 was not able to transfer data between the MACE FIFO and the 1222 card's SRAM fast enough. If this happens, something is 1223 seriously wrong with the hardware. 1224 ---------------------------------------------------------------------------- */ 1225 static void update_stats(unsigned int ioaddr, struct net_device *dev) 1226 { 1227 mace_private *lp = netdev_priv(dev); 1228 1229 lp->mace_stats.rcvcc += mace_read(lp, ioaddr, MACE_RCVCC); 1230 lp->mace_stats.rntpc += mace_read(lp, ioaddr, MACE_RNTPC); 1231 lp->mace_stats.mpc += mace_read(lp, ioaddr, MACE_MPC); 1232 /* At this point, mace_stats is fully updated for this call. 1233 We may now update the linux_stats. */ 1234 1235 /* The MACE has no equivalent for linux_stats field which are commented 1236 out. */ 1237 1238 /* lp->linux_stats.multicast; */ 1239 lp->linux_stats.collisions = 1240 lp->mace_stats.rcvcco * 256 + lp->mace_stats.rcvcc; 1241 /* Collision: The MACE may retry sending a packet 15 times 1242 before giving up. The retry count is in XMTRC. 1243 Does each retry constitute a collision? 1244 If so, why doesn't the RCVCC record these collisions? */ 1245 1246 /* detailed rx_errors: */ 1247 lp->linux_stats.rx_length_errors = 1248 lp->mace_stats.rntpco * 256 + lp->mace_stats.rntpc; 1249 /* lp->linux_stats.rx_over_errors */ 1250 lp->linux_stats.rx_crc_errors = lp->mace_stats.fcs; 1251 lp->linux_stats.rx_frame_errors = lp->mace_stats.fram; 1252 lp->linux_stats.rx_fifo_errors = lp->mace_stats.oflo; 1253 lp->linux_stats.rx_missed_errors = 1254 lp->mace_stats.mpco * 256 + lp->mace_stats.mpc; 1255 1256 /* detailed tx_errors */ 1257 lp->linux_stats.tx_aborted_errors = lp->mace_stats.rtry; 1258 lp->linux_stats.tx_carrier_errors = lp->mace_stats.lcar; 1259 /* LCAR usually results from bad cabling. */ 1260 lp->linux_stats.tx_fifo_errors = lp->mace_stats.uflo; 1261 lp->linux_stats.tx_heartbeat_errors = lp->mace_stats.cerr; 1262 /* lp->linux_stats.tx_window_errors; */ 1263 } /* update_stats */ 1264 1265 /* ---------------------------------------------------------------------------- 1266 mace_get_stats 1267 Gathers ethernet statistics from the MACE chip. 1268 ---------------------------------------------------------------------------- */ 1269 static struct net_device_stats *mace_get_stats(struct net_device *dev) 1270 { 1271 mace_private *lp = netdev_priv(dev); 1272 1273 update_stats(dev->base_addr, dev); 1274 1275 pr_debug("%s: updating the statistics.\n", dev->name); 1276 pr_linux_stats(&lp->linux_stats); 1277 pr_mace_stats(&lp->mace_stats); 1278 1279 return &lp->linux_stats; 1280 } /* net_device_stats */ 1281 1282 /* ---------------------------------------------------------------------------- 1283 updateCRC 1284 Modified from Am79C90 data sheet. 1285 ---------------------------------------------------------------------------- */ 1286 1287 #ifdef BROKEN_MULTICAST 1288 1289 static void updateCRC(int *CRC, int bit) 1290 { 1291 static const int poly[]={ 1292 1,1,1,0, 1,1,0,1, 1293 1,0,1,1, 1,0,0,0, 1294 1,0,0,0, 0,0,1,1, 1295 0,0,1,0, 0,0,0,0 1296 }; /* CRC polynomial. poly[n] = coefficient of the x**n term of the 1297 CRC generator polynomial. */ 1298 1299 int j; 1300 1301 /* shift CRC and control bit (CRC[32]) */ 1302 for (j = 32; j > 0; j--) 1303 CRC[j] = CRC[j-1]; 1304 CRC[0] = 0; 1305 1306 /* If bit XOR(control bit) = 1, set CRC = CRC XOR polynomial. */ 1307 if (bit ^ CRC[32]) 1308 for (j = 0; j < 32; j++) 1309 CRC[j] ^= poly[j]; 1310 } /* updateCRC */ 1311 1312 /* ---------------------------------------------------------------------------- 1313 BuildLAF 1314 Build logical address filter. 1315 Modified from Am79C90 data sheet. 1316 1317 Input 1318 ladrf: logical address filter (contents initialized to 0) 1319 adr: ethernet address 1320 ---------------------------------------------------------------------------- */ 1321 static void BuildLAF(int *ladrf, int *adr) 1322 { 1323 int CRC[33]={1}; /* CRC register, 1 word/bit + extra control bit */ 1324 1325 int i, byte; /* temporary array indices */ 1326 int hashcode; /* the output object */ 1327 1328 CRC[32]=0; 1329 1330 for (byte = 0; byte < 6; byte++) 1331 for (i = 0; i < 8; i++) 1332 updateCRC(CRC, (adr[byte] >> i) & 1); 1333 1334 hashcode = 0; 1335 for (i = 0; i < 6; i++) 1336 hashcode = (hashcode << 1) + CRC[i]; 1337 1338 byte = hashcode >> 3; 1339 ladrf[byte] |= (1 << (hashcode & 7)); 1340 1341 #ifdef PCMCIA_DEBUG 1342 if (0) 1343 printk(KERN_DEBUG " adr =%pM\n", adr); 1344 printk(KERN_DEBUG " hashcode = %d(decimal), ladrf[0:63] =", hashcode); 1345 for (i = 0; i < 8; i++) 1346 pr_cont(" %02X", ladrf[i]); 1347 pr_cont("\n"); 1348 #endif 1349 } /* BuildLAF */ 1350 1351 /* ---------------------------------------------------------------------------- 1352 restore_multicast_list 1353 Restores the multicast filter for MACE chip to the last 1354 set_multicast_list() call. 1355 1356 Input 1357 multicast_num_addrs 1358 multicast_ladrf[] 1359 ---------------------------------------------------------------------------- */ 1360 static void restore_multicast_list(struct net_device *dev) 1361 { 1362 mace_private *lp = netdev_priv(dev); 1363 int num_addrs = lp->multicast_num_addrs; 1364 int *ladrf = lp->multicast_ladrf; 1365 unsigned int ioaddr = dev->base_addr; 1366 int i; 1367 1368 pr_debug("%s: restoring Rx mode to %d addresses.\n", 1369 dev->name, num_addrs); 1370 1371 if (num_addrs > 0) { 1372 1373 pr_debug("Attempt to restore multicast list detected.\n"); 1374 1375 mace_write(lp, ioaddr, MACE_IAC, MACE_IAC_ADDRCHG | MACE_IAC_LOGADDR); 1376 /* Poll ADDRCHG bit */ 1377 while (mace_read(lp, ioaddr, MACE_IAC) & MACE_IAC_ADDRCHG) 1378 ; 1379 /* Set LADRF register */ 1380 for (i = 0; i < MACE_LADRF_LEN; i++) 1381 mace_write(lp, ioaddr, MACE_LADRF, ladrf[i]); 1382 1383 mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_RCVFCSE | MACE_UTR_LOOP_EXTERNAL); 1384 mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV); 1385 1386 } else if (num_addrs < 0) { 1387 1388 /* Promiscuous mode: receive all packets */ 1389 mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL); 1390 mace_write(lp, ioaddr, MACE_MACCC, 1391 MACE_MACCC_PROM | MACE_MACCC_ENXMT | MACE_MACCC_ENRCV 1392 ); 1393 1394 } else { 1395 1396 /* Normal mode */ 1397 mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL); 1398 mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV); 1399 1400 } 1401 } /* restore_multicast_list */ 1402 1403 /* ---------------------------------------------------------------------------- 1404 set_multicast_list 1405 Set or clear the multicast filter for this adaptor. 1406 1407 Input 1408 num_addrs == -1 Promiscuous mode, receive all packets 1409 num_addrs == 0 Normal mode, clear multicast list 1410 num_addrs > 0 Multicast mode, receive normal and MC packets, and do 1411 best-effort filtering. 1412 Output 1413 multicast_num_addrs 1414 multicast_ladrf[] 1415 ---------------------------------------------------------------------------- */ 1416 1417 static void set_multicast_list(struct net_device *dev) 1418 { 1419 mace_private *lp = netdev_priv(dev); 1420 int adr[ETH_ALEN] = {0}; /* Ethernet address */ 1421 struct netdev_hw_addr *ha; 1422 1423 #ifdef PCMCIA_DEBUG 1424 { 1425 static int old; 1426 if (netdev_mc_count(dev) != old) { 1427 old = netdev_mc_count(dev); 1428 pr_debug("%s: setting Rx mode to %d addresses.\n", 1429 dev->name, old); 1430 } 1431 } 1432 #endif 1433 1434 /* Set multicast_num_addrs. */ 1435 lp->multicast_num_addrs = netdev_mc_count(dev); 1436 1437 /* Set multicast_ladrf. */ 1438 if (num_addrs > 0) { 1439 /* Calculate multicast logical address filter */ 1440 memset(lp->multicast_ladrf, 0, MACE_LADRF_LEN); 1441 netdev_for_each_mc_addr(ha, dev) { 1442 memcpy(adr, ha->addr, ETH_ALEN); 1443 BuildLAF(lp->multicast_ladrf, adr); 1444 } 1445 } 1446 1447 restore_multicast_list(dev); 1448 1449 } /* set_multicast_list */ 1450 1451 #endif /* BROKEN_MULTICAST */ 1452 1453 static void restore_multicast_list(struct net_device *dev) 1454 { 1455 unsigned int ioaddr = dev->base_addr; 1456 mace_private *lp = netdev_priv(dev); 1457 1458 pr_debug("%s: restoring Rx mode to %d addresses.\n", dev->name, 1459 lp->multicast_num_addrs); 1460 1461 if (dev->flags & IFF_PROMISC) { 1462 /* Promiscuous mode: receive all packets */ 1463 mace_write(lp,ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL); 1464 mace_write(lp, ioaddr, MACE_MACCC, 1465 MACE_MACCC_PROM | MACE_MACCC_ENXMT | MACE_MACCC_ENRCV 1466 ); 1467 } else { 1468 /* Normal mode */ 1469 mace_write(lp, ioaddr, MACE_UTR, MACE_UTR_LOOP_EXTERNAL); 1470 mace_write(lp, ioaddr, MACE_MACCC, MACE_MACCC_ENXMT | MACE_MACCC_ENRCV); 1471 } 1472 } /* restore_multicast_list */ 1473 1474 static void set_multicast_list(struct net_device *dev) 1475 { 1476 mace_private *lp = netdev_priv(dev); 1477 1478 #ifdef PCMCIA_DEBUG 1479 { 1480 static int old; 1481 if (netdev_mc_count(dev) != old) { 1482 old = netdev_mc_count(dev); 1483 pr_debug("%s: setting Rx mode to %d addresses.\n", 1484 dev->name, old); 1485 } 1486 } 1487 #endif 1488 1489 lp->multicast_num_addrs = netdev_mc_count(dev); 1490 restore_multicast_list(dev); 1491 1492 } /* set_multicast_list */ 1493 1494 static const struct pcmcia_device_id nmclan_ids[] = { 1495 PCMCIA_DEVICE_PROD_ID12("New Media Corporation", "Ethernet", 0x085a850b, 0x00b2e941), 1496 PCMCIA_DEVICE_PROD_ID12("Portable Add-ons", "Ethernet+", 0xebf1d60, 0xad673aaf), 1497 PCMCIA_DEVICE_NULL, 1498 }; 1499 MODULE_DEVICE_TABLE(pcmcia, nmclan_ids); 1500 1501 static struct pcmcia_driver nmclan_cs_driver = { 1502 .owner = THIS_MODULE, 1503 .name = "nmclan_cs", 1504 .probe = nmclan_probe, 1505 .remove = nmclan_detach, 1506 .id_table = nmclan_ids, 1507 .suspend = nmclan_suspend, 1508 .resume = nmclan_resume, 1509 }; 1510 module_pcmcia_driver(nmclan_cs_driver); 1511