1 // SPDX-License-Identifier: GPL-2.0-or-later 2 3 /* Advanced Micro Devices Inc. AMD8111E Linux Network Driver 4 * Copyright (C) 2004 Advanced Micro Devices 5 * 6 * Copyright 2001,2002 Jeff Garzik <jgarzik@mandrakesoft.com> [ 8139cp.c,tg3.c ] 7 * Copyright (C) 2001, 2002 David S. Miller (davem@redhat.com)[ tg3.c] 8 * Copyright 1996-1999 Thomas Bogendoerfer [ pcnet32.c ] 9 * Derived from the lance driver written 1993,1994,1995 by Donald Becker. 10 * Copyright 1993 United States Government as represented by the 11 * Director, National Security Agency.[ pcnet32.c ] 12 * Carsten Langgaard, carstenl@mips.com [ pcnet32.c ] 13 * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. 14 * 15 16 Module Name: 17 18 amd8111e.c 19 20 Abstract: 21 22 AMD8111 based 10/100 Ethernet Controller Driver. 23 24 Environment: 25 26 Kernel Mode 27 28 Revision History: 29 3.0.0 30 Initial Revision. 31 3.0.1 32 1. Dynamic interrupt coalescing. 33 2. Removed prev_stats. 34 3. MII support. 35 4. Dynamic IPG support 36 3.0.2 05/29/2003 37 1. Bug fix: Fixed failure to send jumbo packets larger than 4k. 38 2. Bug fix: Fixed VLAN support failure. 39 3. Bug fix: Fixed receive interrupt coalescing bug. 40 4. Dynamic IPG support is disabled by default. 41 3.0.3 06/05/2003 42 1. Bug fix: Fixed failure to close the interface if SMP is enabled. 43 3.0.4 12/09/2003 44 1. Added set_mac_address routine for bonding driver support. 45 2. Tested the driver for bonding support 46 3. Bug fix: Fixed mismach in actual receive buffer lenth and lenth 47 indicated to the h/w. 48 4. Modified amd8111e_rx() routine to receive all the received packets 49 in the first interrupt. 50 5. Bug fix: Corrected rx_errors reported in get_stats() function. 51 3.0.5 03/22/2004 52 1. Added NAPI support 53 54 */ 55 56 57 #include <linux/module.h> 58 #include <linux/kernel.h> 59 #include <linux/types.h> 60 #include <linux/compiler.h> 61 #include <linux/delay.h> 62 #include <linux/interrupt.h> 63 #include <linux/ioport.h> 64 #include <linux/pci.h> 65 #include <linux/netdevice.h> 66 #include <linux/etherdevice.h> 67 #include <linux/skbuff.h> 68 #include <linux/ethtool.h> 69 #include <linux/mii.h> 70 #include <linux/if_vlan.h> 71 #include <linux/ctype.h> 72 #include <linux/crc32.h> 73 #include <linux/dma-mapping.h> 74 75 #include <asm/io.h> 76 #include <asm/byteorder.h> 77 #include <linux/uaccess.h> 78 79 #if IS_ENABLED(CONFIG_VLAN_8021Q) 80 #define AMD8111E_VLAN_TAG_USED 1 81 #else 82 #define AMD8111E_VLAN_TAG_USED 0 83 #endif 84 85 #include "amd8111e.h" 86 #define MODULE_NAME "amd8111e" 87 MODULE_AUTHOR("Advanced Micro Devices, Inc."); 88 MODULE_DESCRIPTION("AMD8111 based 10/100 Ethernet Controller."); 89 MODULE_LICENSE("GPL"); 90 module_param_array(speed_duplex, int, NULL, 0); 91 MODULE_PARM_DESC(speed_duplex, "Set device speed and duplex modes, 0: Auto Negotiate, 1: 10Mbps Half Duplex, 2: 10Mbps Full Duplex, 3: 100Mbps Half Duplex, 4: 100Mbps Full Duplex"); 92 module_param_array(coalesce, bool, NULL, 0); 93 MODULE_PARM_DESC(coalesce, "Enable or Disable interrupt coalescing, 1: Enable, 0: Disable"); 94 module_param_array(dynamic_ipg, bool, NULL, 0); 95 MODULE_PARM_DESC(dynamic_ipg, "Enable or Disable dynamic IPG, 1: Enable, 0: Disable"); 96 97 /* This function will read the PHY registers. */ 98 static int amd8111e_read_phy(struct amd8111e_priv *lp, 99 int phy_id, int reg, u32 *val) 100 { 101 void __iomem *mmio = lp->mmio; 102 unsigned int reg_val; 103 unsigned int repeat = REPEAT_CNT; 104 105 reg_val = readl(mmio + PHY_ACCESS); 106 while (reg_val & PHY_CMD_ACTIVE) 107 reg_val = readl(mmio + PHY_ACCESS); 108 109 writel(PHY_RD_CMD | ((phy_id & 0x1f) << 21) | 110 ((reg & 0x1f) << 16), mmio + PHY_ACCESS); 111 do { 112 reg_val = readl(mmio + PHY_ACCESS); 113 udelay(30); /* It takes 30 us to read/write data */ 114 } while (--repeat && (reg_val & PHY_CMD_ACTIVE)); 115 if (reg_val & PHY_RD_ERR) 116 goto err_phy_read; 117 118 *val = reg_val & 0xffff; 119 return 0; 120 err_phy_read: 121 *val = 0; 122 return -EINVAL; 123 124 } 125 126 /* This function will write into PHY registers. */ 127 static int amd8111e_write_phy(struct amd8111e_priv *lp, 128 int phy_id, int reg, u32 val) 129 { 130 unsigned int repeat = REPEAT_CNT; 131 void __iomem *mmio = lp->mmio; 132 unsigned int reg_val; 133 134 reg_val = readl(mmio + PHY_ACCESS); 135 while (reg_val & PHY_CMD_ACTIVE) 136 reg_val = readl(mmio + PHY_ACCESS); 137 138 writel(PHY_WR_CMD | ((phy_id & 0x1f) << 21) | 139 ((reg & 0x1f) << 16)|val, mmio + PHY_ACCESS); 140 141 do { 142 reg_val = readl(mmio + PHY_ACCESS); 143 udelay(30); /* It takes 30 us to read/write the data */ 144 } while (--repeat && (reg_val & PHY_CMD_ACTIVE)); 145 146 if (reg_val & PHY_RD_ERR) 147 goto err_phy_write; 148 149 return 0; 150 151 err_phy_write: 152 return -EINVAL; 153 154 } 155 156 /* This is the mii register read function provided to the mii interface. */ 157 static int amd8111e_mdio_read(struct net_device *dev, int phy_id, int reg_num) 158 { 159 struct amd8111e_priv *lp = netdev_priv(dev); 160 unsigned int reg_val; 161 162 amd8111e_read_phy(lp, phy_id, reg_num, ®_val); 163 return reg_val; 164 165 } 166 167 /* This is the mii register write function provided to the mii interface. */ 168 static void amd8111e_mdio_write(struct net_device *dev, 169 int phy_id, int reg_num, int val) 170 { 171 struct amd8111e_priv *lp = netdev_priv(dev); 172 173 amd8111e_write_phy(lp, phy_id, reg_num, val); 174 } 175 176 /* This function will set PHY speed. During initialization sets 177 * the original speed to 100 full 178 */ 179 static void amd8111e_set_ext_phy(struct net_device *dev) 180 { 181 struct amd8111e_priv *lp = netdev_priv(dev); 182 u32 bmcr, advert, tmp; 183 184 /* Determine mii register values to set the speed */ 185 advert = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_ADVERTISE); 186 tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4); 187 switch (lp->ext_phy_option) { 188 189 default: 190 case SPEED_AUTONEG: /* advertise all values */ 191 tmp |= (ADVERTISE_10HALF | ADVERTISE_10FULL | 192 ADVERTISE_100HALF | ADVERTISE_100FULL); 193 break; 194 case SPEED10_HALF: 195 tmp |= ADVERTISE_10HALF; 196 break; 197 case SPEED10_FULL: 198 tmp |= ADVERTISE_10FULL; 199 break; 200 case SPEED100_HALF: 201 tmp |= ADVERTISE_100HALF; 202 break; 203 case SPEED100_FULL: 204 tmp |= ADVERTISE_100FULL; 205 break; 206 } 207 208 if(advert != tmp) 209 amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_ADVERTISE, tmp); 210 /* Restart auto negotiation */ 211 bmcr = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_BMCR); 212 bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART); 213 amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_BMCR, bmcr); 214 215 } 216 217 /* This function will unmap skb->data space and will free 218 * all transmit and receive skbuffs. 219 */ 220 static int amd8111e_free_skbs(struct net_device *dev) 221 { 222 struct amd8111e_priv *lp = netdev_priv(dev); 223 struct sk_buff *rx_skbuff; 224 int i; 225 226 /* Freeing transmit skbs */ 227 for (i = 0; i < NUM_TX_BUFFERS; i++) { 228 if (lp->tx_skbuff[i]) { 229 dma_unmap_single(&lp->pci_dev->dev, 230 lp->tx_dma_addr[i], 231 lp->tx_skbuff[i]->len, DMA_TO_DEVICE); 232 dev_kfree_skb(lp->tx_skbuff[i]); 233 lp->tx_skbuff[i] = NULL; 234 lp->tx_dma_addr[i] = 0; 235 } 236 } 237 /* Freeing previously allocated receive buffers */ 238 for (i = 0; i < NUM_RX_BUFFERS; i++) { 239 rx_skbuff = lp->rx_skbuff[i]; 240 if (rx_skbuff != NULL) { 241 dma_unmap_single(&lp->pci_dev->dev, 242 lp->rx_dma_addr[i], 243 lp->rx_buff_len - 2, DMA_FROM_DEVICE); 244 dev_kfree_skb(lp->rx_skbuff[i]); 245 lp->rx_skbuff[i] = NULL; 246 lp->rx_dma_addr[i] = 0; 247 } 248 } 249 250 return 0; 251 } 252 253 /* This will set the receive buffer length corresponding 254 * to the mtu size of networkinterface. 255 */ 256 static inline void amd8111e_set_rx_buff_len(struct net_device *dev) 257 { 258 struct amd8111e_priv *lp = netdev_priv(dev); 259 unsigned int mtu = dev->mtu; 260 261 if (mtu > ETH_DATA_LEN) { 262 /* MTU + ethernet header + FCS 263 * + optional VLAN tag + skb reserve space 2 264 */ 265 lp->rx_buff_len = mtu + ETH_HLEN + 10; 266 lp->options |= OPTION_JUMBO_ENABLE; 267 } else { 268 lp->rx_buff_len = PKT_BUFF_SZ; 269 lp->options &= ~OPTION_JUMBO_ENABLE; 270 } 271 } 272 273 /* This function will free all the previously allocated buffers, 274 * determine new receive buffer length and will allocate new receive buffers. 275 * This function also allocates and initializes both the transmitter 276 * and receive hardware descriptors. 277 */ 278 static int amd8111e_init_ring(struct net_device *dev) 279 { 280 struct amd8111e_priv *lp = netdev_priv(dev); 281 int i; 282 283 lp->rx_idx = lp->tx_idx = 0; 284 lp->tx_complete_idx = 0; 285 lp->tx_ring_idx = 0; 286 287 288 if (lp->opened) 289 /* Free previously allocated transmit and receive skbs */ 290 amd8111e_free_skbs(dev); 291 292 else { 293 /* allocate the tx and rx descriptors */ 294 lp->tx_ring = dma_alloc_coherent(&lp->pci_dev->dev, 295 sizeof(struct amd8111e_tx_dr) * NUM_TX_RING_DR, 296 &lp->tx_ring_dma_addr, GFP_ATOMIC); 297 if (!lp->tx_ring) 298 goto err_no_mem; 299 300 lp->rx_ring = dma_alloc_coherent(&lp->pci_dev->dev, 301 sizeof(struct amd8111e_rx_dr) * NUM_RX_RING_DR, 302 &lp->rx_ring_dma_addr, GFP_ATOMIC); 303 if (!lp->rx_ring) 304 goto err_free_tx_ring; 305 } 306 307 /* Set new receive buff size */ 308 amd8111e_set_rx_buff_len(dev); 309 310 /* Allocating receive skbs */ 311 for (i = 0; i < NUM_RX_BUFFERS; i++) { 312 313 lp->rx_skbuff[i] = netdev_alloc_skb(dev, lp->rx_buff_len); 314 if (!lp->rx_skbuff[i]) { 315 /* Release previos allocated skbs */ 316 for (--i; i >= 0; i--) 317 dev_kfree_skb(lp->rx_skbuff[i]); 318 goto err_free_rx_ring; 319 } 320 skb_reserve(lp->rx_skbuff[i], 2); 321 } 322 /* Initilaizing receive descriptors */ 323 for (i = 0; i < NUM_RX_BUFFERS; i++) { 324 lp->rx_dma_addr[i] = dma_map_single(&lp->pci_dev->dev, 325 lp->rx_skbuff[i]->data, 326 lp->rx_buff_len - 2, 327 DMA_FROM_DEVICE); 328 329 lp->rx_ring[i].buff_phy_addr = cpu_to_le32(lp->rx_dma_addr[i]); 330 lp->rx_ring[i].buff_count = cpu_to_le16(lp->rx_buff_len-2); 331 wmb(); 332 lp->rx_ring[i].rx_flags = cpu_to_le16(OWN_BIT); 333 } 334 335 /* Initializing transmit descriptors */ 336 for (i = 0; i < NUM_TX_RING_DR; i++) { 337 lp->tx_ring[i].buff_phy_addr = 0; 338 lp->tx_ring[i].tx_flags = 0; 339 lp->tx_ring[i].buff_count = 0; 340 } 341 342 return 0; 343 344 err_free_rx_ring: 345 346 dma_free_coherent(&lp->pci_dev->dev, 347 sizeof(struct amd8111e_rx_dr) * NUM_RX_RING_DR, 348 lp->rx_ring, lp->rx_ring_dma_addr); 349 350 err_free_tx_ring: 351 352 dma_free_coherent(&lp->pci_dev->dev, 353 sizeof(struct amd8111e_tx_dr) * NUM_TX_RING_DR, 354 lp->tx_ring, lp->tx_ring_dma_addr); 355 356 err_no_mem: 357 return -ENOMEM; 358 } 359 360 /* This function will set the interrupt coalescing according 361 * to the input arguments 362 */ 363 static int amd8111e_set_coalesce(struct net_device *dev, enum coal_mode cmod) 364 { 365 unsigned int timeout; 366 unsigned int event_count; 367 368 struct amd8111e_priv *lp = netdev_priv(dev); 369 void __iomem *mmio = lp->mmio; 370 struct amd8111e_coalesce_conf *coal_conf = &lp->coal_conf; 371 372 373 switch(cmod) 374 { 375 case RX_INTR_COAL : 376 timeout = coal_conf->rx_timeout; 377 event_count = coal_conf->rx_event_count; 378 if (timeout > MAX_TIMEOUT || 379 event_count > MAX_EVENT_COUNT) 380 return -EINVAL; 381 382 timeout = timeout * DELAY_TIMER_CONV; 383 writel(VAL0|STINTEN, mmio+INTEN0); 384 writel((u32)DLY_INT_A_R0 | (event_count << 16) | 385 timeout, mmio + DLY_INT_A); 386 break; 387 388 case TX_INTR_COAL: 389 timeout = coal_conf->tx_timeout; 390 event_count = coal_conf->tx_event_count; 391 if (timeout > MAX_TIMEOUT || 392 event_count > MAX_EVENT_COUNT) 393 return -EINVAL; 394 395 396 timeout = timeout * DELAY_TIMER_CONV; 397 writel(VAL0 | STINTEN, mmio + INTEN0); 398 writel((u32)DLY_INT_B_T0 | (event_count << 16) | 399 timeout, mmio + DLY_INT_B); 400 break; 401 402 case DISABLE_COAL: 403 writel(0, mmio + STVAL); 404 writel(STINTEN, mmio + INTEN0); 405 writel(0, mmio + DLY_INT_B); 406 writel(0, mmio + DLY_INT_A); 407 break; 408 case ENABLE_COAL: 409 /* Start the timer */ 410 writel((u32)SOFT_TIMER_FREQ, mmio + STVAL); /* 0.5 sec */ 411 writel(VAL0 | STINTEN, mmio + INTEN0); 412 break; 413 default: 414 break; 415 416 } 417 return 0; 418 419 } 420 421 /* This function initializes the device registers and starts the device. */ 422 static int amd8111e_restart(struct net_device *dev) 423 { 424 struct amd8111e_priv *lp = netdev_priv(dev); 425 void __iomem *mmio = lp->mmio; 426 int i, reg_val; 427 428 /* stop the chip */ 429 writel(RUN, mmio + CMD0); 430 431 if (amd8111e_init_ring(dev)) 432 return -ENOMEM; 433 434 /* enable the port manager and set auto negotiation always */ 435 writel((u32)VAL1 | EN_PMGR, mmio + CMD3); 436 writel((u32)XPHYANE | XPHYRST, mmio + CTRL2); 437 438 amd8111e_set_ext_phy(dev); 439 440 /* set control registers */ 441 reg_val = readl(mmio + CTRL1); 442 reg_val &= ~XMTSP_MASK; 443 writel(reg_val | XMTSP_128 | CACHE_ALIGN, mmio + CTRL1); 444 445 /* enable interrupt */ 446 writel(APINT5EN | APINT4EN | APINT3EN | APINT2EN | APINT1EN | 447 APINT0EN | MIIPDTINTEN | MCCIINTEN | MCCINTEN | MREINTEN | 448 SPNDINTEN | MPINTEN | SINTEN | STINTEN, mmio + INTEN0); 449 450 writel(VAL3 | LCINTEN | VAL1 | TINTEN0 | VAL0 | RINTEN0, mmio + INTEN0); 451 452 /* initialize tx and rx ring base addresses */ 453 writel((u32)lp->tx_ring_dma_addr, mmio + XMT_RING_BASE_ADDR0); 454 writel((u32)lp->rx_ring_dma_addr, mmio + RCV_RING_BASE_ADDR0); 455 456 writew((u32)NUM_TX_RING_DR, mmio + XMT_RING_LEN0); 457 writew((u16)NUM_RX_RING_DR, mmio + RCV_RING_LEN0); 458 459 /* set default IPG to 96 */ 460 writew((u32)DEFAULT_IPG, mmio + IPG); 461 writew((u32)(DEFAULT_IPG-IFS1_DELTA), mmio + IFS1); 462 463 if (lp->options & OPTION_JUMBO_ENABLE) { 464 writel((u32)VAL2|JUMBO, mmio + CMD3); 465 /* Reset REX_UFLO */ 466 writel(REX_UFLO, mmio + CMD2); 467 /* Should not set REX_UFLO for jumbo frames */ 468 writel(VAL0 | APAD_XMT | REX_RTRY, mmio + CMD2); 469 } else { 470 writel(VAL0 | APAD_XMT | REX_RTRY | REX_UFLO, mmio + CMD2); 471 writel((u32)JUMBO, mmio + CMD3); 472 } 473 474 #if AMD8111E_VLAN_TAG_USED 475 writel((u32)VAL2 | VSIZE | VL_TAG_DEL, mmio + CMD3); 476 #endif 477 writel(VAL0 | APAD_XMT | REX_RTRY, mmio + CMD2); 478 479 /* Setting the MAC address to the device */ 480 for (i = 0; i < ETH_ALEN; i++) 481 writeb(dev->dev_addr[i], mmio + PADR + i); 482 483 /* Enable interrupt coalesce */ 484 if (lp->options & OPTION_INTR_COAL_ENABLE) { 485 netdev_info(dev, "Interrupt Coalescing Enabled.\n"); 486 amd8111e_set_coalesce(dev, ENABLE_COAL); 487 } 488 489 /* set RUN bit to start the chip */ 490 writel(VAL2 | RDMD0, mmio + CMD0); 491 writel(VAL0 | INTREN | RUN, mmio + CMD0); 492 493 /* To avoid PCI posting bug */ 494 readl(mmio+CMD0); 495 return 0; 496 } 497 498 /* This function clears necessary the device registers. */ 499 static void amd8111e_init_hw_default(struct amd8111e_priv *lp) 500 { 501 unsigned int reg_val; 502 unsigned int logic_filter[2] = {0,}; 503 void __iomem *mmio = lp->mmio; 504 505 506 /* stop the chip */ 507 writel(RUN, mmio + CMD0); 508 509 /* AUTOPOLL0 Register *//*TBD default value is 8100 in FPS */ 510 writew( 0x8100 | lp->ext_phy_addr, mmio + AUTOPOLL0); 511 512 /* Clear RCV_RING_BASE_ADDR */ 513 writel(0, mmio + RCV_RING_BASE_ADDR0); 514 515 /* Clear XMT_RING_BASE_ADDR */ 516 writel(0, mmio + XMT_RING_BASE_ADDR0); 517 writel(0, mmio + XMT_RING_BASE_ADDR1); 518 writel(0, mmio + XMT_RING_BASE_ADDR2); 519 writel(0, mmio + XMT_RING_BASE_ADDR3); 520 521 /* Clear CMD0 */ 522 writel(CMD0_CLEAR, mmio + CMD0); 523 524 /* Clear CMD2 */ 525 writel(CMD2_CLEAR, mmio + CMD2); 526 527 /* Clear CMD7 */ 528 writel(CMD7_CLEAR, mmio + CMD7); 529 530 /* Clear DLY_INT_A and DLY_INT_B */ 531 writel(0x0, mmio + DLY_INT_A); 532 writel(0x0, mmio + DLY_INT_B); 533 534 /* Clear FLOW_CONTROL */ 535 writel(0x0, mmio + FLOW_CONTROL); 536 537 /* Clear INT0 write 1 to clear register */ 538 reg_val = readl(mmio + INT0); 539 writel(reg_val, mmio + INT0); 540 541 /* Clear STVAL */ 542 writel(0x0, mmio + STVAL); 543 544 /* Clear INTEN0 */ 545 writel(INTEN0_CLEAR, mmio + INTEN0); 546 547 /* Clear LADRF */ 548 writel(0x0, mmio + LADRF); 549 550 /* Set SRAM_SIZE & SRAM_BOUNDARY registers */ 551 writel(0x80010, mmio + SRAM_SIZE); 552 553 /* Clear RCV_RING0_LEN */ 554 writel(0x0, mmio + RCV_RING_LEN0); 555 556 /* Clear XMT_RING0/1/2/3_LEN */ 557 writel(0x0, mmio + XMT_RING_LEN0); 558 writel(0x0, mmio + XMT_RING_LEN1); 559 writel(0x0, mmio + XMT_RING_LEN2); 560 writel(0x0, mmio + XMT_RING_LEN3); 561 562 /* Clear XMT_RING_LIMIT */ 563 writel(0x0, mmio + XMT_RING_LIMIT); 564 565 /* Clear MIB */ 566 writew(MIB_CLEAR, mmio + MIB_ADDR); 567 568 /* Clear LARF */ 569 amd8111e_writeq(*(u64 *)logic_filter, mmio + LADRF); 570 571 /* SRAM_SIZE register */ 572 reg_val = readl(mmio + SRAM_SIZE); 573 574 if (lp->options & OPTION_JUMBO_ENABLE) 575 writel(VAL2 | JUMBO, mmio + CMD3); 576 #if AMD8111E_VLAN_TAG_USED 577 writel(VAL2 | VSIZE | VL_TAG_DEL, mmio + CMD3); 578 #endif 579 /* Set default value to CTRL1 Register */ 580 writel(CTRL1_DEFAULT, mmio + CTRL1); 581 582 /* To avoid PCI posting bug */ 583 readl(mmio + CMD2); 584 585 } 586 587 /* This function disables the interrupt and clears all the pending 588 * interrupts in INT0 589 */ 590 static void amd8111e_disable_interrupt(struct amd8111e_priv *lp) 591 { 592 u32 intr0; 593 594 /* Disable interrupt */ 595 writel(INTREN, lp->mmio + CMD0); 596 597 /* Clear INT0 */ 598 intr0 = readl(lp->mmio + INT0); 599 writel(intr0, lp->mmio + INT0); 600 601 /* To avoid PCI posting bug */ 602 readl(lp->mmio + INT0); 603 604 } 605 606 /* This function stops the chip. */ 607 static void amd8111e_stop_chip(struct amd8111e_priv *lp) 608 { 609 writel(RUN, lp->mmio + CMD0); 610 611 /* To avoid PCI posting bug */ 612 readl(lp->mmio + CMD0); 613 } 614 615 /* This function frees the transmiter and receiver descriptor rings. */ 616 static void amd8111e_free_ring(struct amd8111e_priv *lp) 617 { 618 /* Free transmit and receive descriptor rings */ 619 if (lp->rx_ring) { 620 dma_free_coherent(&lp->pci_dev->dev, 621 sizeof(struct amd8111e_rx_dr) * NUM_RX_RING_DR, 622 lp->rx_ring, lp->rx_ring_dma_addr); 623 lp->rx_ring = NULL; 624 } 625 626 if (lp->tx_ring) { 627 dma_free_coherent(&lp->pci_dev->dev, 628 sizeof(struct amd8111e_tx_dr) * NUM_TX_RING_DR, 629 lp->tx_ring, lp->tx_ring_dma_addr); 630 631 lp->tx_ring = NULL; 632 } 633 634 } 635 636 /* This function will free all the transmit skbs that are actually 637 * transmitted by the device. It will check the ownership of the 638 * skb before freeing the skb. 639 */ 640 static int amd8111e_tx(struct net_device *dev) 641 { 642 struct amd8111e_priv *lp = netdev_priv(dev); 643 int tx_index; 644 int status; 645 /* Complete all the transmit packet */ 646 while (lp->tx_complete_idx != lp->tx_idx) { 647 tx_index = lp->tx_complete_idx & TX_RING_DR_MOD_MASK; 648 status = le16_to_cpu(lp->tx_ring[tx_index].tx_flags); 649 650 if (status & OWN_BIT) 651 break; /* It still hasn't been Txed */ 652 653 lp->tx_ring[tx_index].buff_phy_addr = 0; 654 655 /* We must free the original skb */ 656 if (lp->tx_skbuff[tx_index]) { 657 dma_unmap_single(&lp->pci_dev->dev, 658 lp->tx_dma_addr[tx_index], 659 lp->tx_skbuff[tx_index]->len, 660 DMA_TO_DEVICE); 661 dev_consume_skb_irq(lp->tx_skbuff[tx_index]); 662 lp->tx_skbuff[tx_index] = NULL; 663 lp->tx_dma_addr[tx_index] = 0; 664 } 665 lp->tx_complete_idx++; 666 /*COAL update tx coalescing parameters */ 667 lp->coal_conf.tx_packets++; 668 lp->coal_conf.tx_bytes += 669 le16_to_cpu(lp->tx_ring[tx_index].buff_count); 670 671 if (netif_queue_stopped(dev) && 672 lp->tx_complete_idx > lp->tx_idx - NUM_TX_BUFFERS + 2) { 673 /* The ring is no longer full, clear tbusy. */ 674 /* lp->tx_full = 0; */ 675 netif_wake_queue(dev); 676 } 677 } 678 return 0; 679 } 680 681 /* This function handles the driver receive operation in polling mode */ 682 static int amd8111e_rx_poll(struct napi_struct *napi, int budget) 683 { 684 struct amd8111e_priv *lp = container_of(napi, struct amd8111e_priv, napi); 685 struct net_device *dev = lp->amd8111e_net_dev; 686 int rx_index = lp->rx_idx & RX_RING_DR_MOD_MASK; 687 void __iomem *mmio = lp->mmio; 688 struct sk_buff *skb, *new_skb; 689 int min_pkt_len, status; 690 int num_rx_pkt = 0; 691 short pkt_len; 692 #if AMD8111E_VLAN_TAG_USED 693 short vtag; 694 #endif 695 696 while (num_rx_pkt < budget) { 697 status = le16_to_cpu(lp->rx_ring[rx_index].rx_flags); 698 if (status & OWN_BIT) 699 break; 700 701 /* There is a tricky error noted by John Murphy, 702 * <murf@perftech.com> to Russ Nelson: Even with 703 * full-sized * buffers it's possible for a 704 * jabber packet to use two buffers, with only 705 * the last correctly noting the error. 706 */ 707 if (status & ERR_BIT) { 708 /* resetting flags */ 709 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS; 710 goto err_next_pkt; 711 } 712 /* check for STP and ENP */ 713 if (!((status & STP_BIT) && (status & ENP_BIT))) { 714 /* resetting flags */ 715 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS; 716 goto err_next_pkt; 717 } 718 pkt_len = le16_to_cpu(lp->rx_ring[rx_index].msg_count) - 4; 719 720 #if AMD8111E_VLAN_TAG_USED 721 vtag = status & TT_MASK; 722 /* MAC will strip vlan tag */ 723 if (vtag != 0) 724 min_pkt_len = MIN_PKT_LEN - 4; 725 else 726 #endif 727 min_pkt_len = MIN_PKT_LEN; 728 729 if (pkt_len < min_pkt_len) { 730 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS; 731 lp->drv_rx_errors++; 732 goto err_next_pkt; 733 } 734 new_skb = netdev_alloc_skb(dev, lp->rx_buff_len); 735 if (!new_skb) { 736 /* if allocation fail, 737 * ignore that pkt and go to next one 738 */ 739 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS; 740 lp->drv_rx_errors++; 741 goto err_next_pkt; 742 } 743 744 skb_reserve(new_skb, 2); 745 skb = lp->rx_skbuff[rx_index]; 746 dma_unmap_single(&lp->pci_dev->dev, lp->rx_dma_addr[rx_index], 747 lp->rx_buff_len - 2, DMA_FROM_DEVICE); 748 skb_put(skb, pkt_len); 749 lp->rx_skbuff[rx_index] = new_skb; 750 lp->rx_dma_addr[rx_index] = dma_map_single(&lp->pci_dev->dev, 751 new_skb->data, 752 lp->rx_buff_len - 2, 753 DMA_FROM_DEVICE); 754 755 skb->protocol = eth_type_trans(skb, dev); 756 757 #if AMD8111E_VLAN_TAG_USED 758 if (vtag == TT_VLAN_TAGGED) { 759 u16 vlan_tag = le16_to_cpu(lp->rx_ring[rx_index].tag_ctrl_info); 760 __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag); 761 } 762 #endif 763 napi_gro_receive(napi, skb); 764 /* COAL update rx coalescing parameters */ 765 lp->coal_conf.rx_packets++; 766 lp->coal_conf.rx_bytes += pkt_len; 767 num_rx_pkt++; 768 769 err_next_pkt: 770 lp->rx_ring[rx_index].buff_phy_addr 771 = cpu_to_le32(lp->rx_dma_addr[rx_index]); 772 lp->rx_ring[rx_index].buff_count = 773 cpu_to_le16(lp->rx_buff_len-2); 774 wmb(); 775 lp->rx_ring[rx_index].rx_flags |= cpu_to_le16(OWN_BIT); 776 rx_index = (++lp->rx_idx) & RX_RING_DR_MOD_MASK; 777 } 778 779 if (num_rx_pkt < budget && napi_complete_done(napi, num_rx_pkt)) { 780 unsigned long flags; 781 782 /* Receive descriptor is empty now */ 783 spin_lock_irqsave(&lp->lock, flags); 784 writel(VAL0|RINTEN0, mmio + INTEN0); 785 writel(VAL2 | RDMD0, mmio + CMD0); 786 spin_unlock_irqrestore(&lp->lock, flags); 787 } 788 789 return num_rx_pkt; 790 } 791 792 /* This function will indicate the link status to the kernel. */ 793 static int amd8111e_link_change(struct net_device *dev) 794 { 795 struct amd8111e_priv *lp = netdev_priv(dev); 796 int status0, speed; 797 798 /* read the link change */ 799 status0 = readl(lp->mmio + STAT0); 800 801 if (status0 & LINK_STATS) { 802 if (status0 & AUTONEG_COMPLETE) 803 lp->link_config.autoneg = AUTONEG_ENABLE; 804 else 805 lp->link_config.autoneg = AUTONEG_DISABLE; 806 807 if (status0 & FULL_DPLX) 808 lp->link_config.duplex = DUPLEX_FULL; 809 else 810 lp->link_config.duplex = DUPLEX_HALF; 811 speed = (status0 & SPEED_MASK) >> 7; 812 if (speed == PHY_SPEED_10) 813 lp->link_config.speed = SPEED_10; 814 else if (speed == PHY_SPEED_100) 815 lp->link_config.speed = SPEED_100; 816 817 netdev_info(dev, "Link is Up. Speed is %s Mbps %s Duplex\n", 818 (lp->link_config.speed == SPEED_100) ? 819 "100" : "10", 820 (lp->link_config.duplex == DUPLEX_FULL) ? 821 "Full" : "Half"); 822 823 netif_carrier_on(dev); 824 } else { 825 lp->link_config.speed = SPEED_INVALID; 826 lp->link_config.duplex = DUPLEX_INVALID; 827 lp->link_config.autoneg = AUTONEG_INVALID; 828 netdev_info(dev, "Link is Down.\n"); 829 netif_carrier_off(dev); 830 } 831 832 return 0; 833 } 834 835 /* This function reads the mib counters. */ 836 static int amd8111e_read_mib(void __iomem *mmio, u8 MIB_COUNTER) 837 { 838 unsigned int status; 839 unsigned int data; 840 unsigned int repeat = REPEAT_CNT; 841 842 writew(MIB_RD_CMD | MIB_COUNTER, mmio + MIB_ADDR); 843 do { 844 status = readw(mmio + MIB_ADDR); 845 udelay(2); /* controller takes MAX 2 us to get mib data */ 846 } 847 while (--repeat && (status & MIB_CMD_ACTIVE)); 848 849 data = readl(mmio + MIB_DATA); 850 return data; 851 } 852 853 /* This function reads the mib registers and returns the hardware statistics. 854 * It updates previous internal driver statistics with new values. 855 */ 856 static struct net_device_stats *amd8111e_get_stats(struct net_device *dev) 857 { 858 struct amd8111e_priv *lp = netdev_priv(dev); 859 void __iomem *mmio = lp->mmio; 860 unsigned long flags; 861 struct net_device_stats *new_stats = &dev->stats; 862 863 if (!lp->opened) 864 return new_stats; 865 spin_lock_irqsave(&lp->lock, flags); 866 867 /* stats.rx_packets */ 868 new_stats->rx_packets = amd8111e_read_mib(mmio, rcv_broadcast_pkts)+ 869 amd8111e_read_mib(mmio, rcv_multicast_pkts)+ 870 amd8111e_read_mib(mmio, rcv_unicast_pkts); 871 872 /* stats.tx_packets */ 873 new_stats->tx_packets = amd8111e_read_mib(mmio, xmt_packets); 874 875 /*stats.rx_bytes */ 876 new_stats->rx_bytes = amd8111e_read_mib(mmio, rcv_octets); 877 878 /* stats.tx_bytes */ 879 new_stats->tx_bytes = amd8111e_read_mib(mmio, xmt_octets); 880 881 /* stats.rx_errors */ 882 /* hw errors + errors driver reported */ 883 new_stats->rx_errors = amd8111e_read_mib(mmio, rcv_undersize_pkts)+ 884 amd8111e_read_mib(mmio, rcv_fragments)+ 885 amd8111e_read_mib(mmio, rcv_jabbers)+ 886 amd8111e_read_mib(mmio, rcv_alignment_errors)+ 887 amd8111e_read_mib(mmio, rcv_fcs_errors)+ 888 amd8111e_read_mib(mmio, rcv_miss_pkts)+ 889 lp->drv_rx_errors; 890 891 /* stats.tx_errors */ 892 new_stats->tx_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts); 893 894 /* stats.rx_dropped*/ 895 new_stats->rx_dropped = amd8111e_read_mib(mmio, rcv_miss_pkts); 896 897 /* stats.tx_dropped*/ 898 new_stats->tx_dropped = amd8111e_read_mib(mmio, xmt_underrun_pkts); 899 900 /* stats.multicast*/ 901 new_stats->multicast = amd8111e_read_mib(mmio, rcv_multicast_pkts); 902 903 /* stats.collisions*/ 904 new_stats->collisions = amd8111e_read_mib(mmio, xmt_collisions); 905 906 /* stats.rx_length_errors*/ 907 new_stats->rx_length_errors = 908 amd8111e_read_mib(mmio, rcv_undersize_pkts)+ 909 amd8111e_read_mib(mmio, rcv_oversize_pkts); 910 911 /* stats.rx_over_errors*/ 912 new_stats->rx_over_errors = amd8111e_read_mib(mmio, rcv_miss_pkts); 913 914 /* stats.rx_crc_errors*/ 915 new_stats->rx_crc_errors = amd8111e_read_mib(mmio, rcv_fcs_errors); 916 917 /* stats.rx_frame_errors*/ 918 new_stats->rx_frame_errors = 919 amd8111e_read_mib(mmio, rcv_alignment_errors); 920 921 /* stats.rx_fifo_errors */ 922 new_stats->rx_fifo_errors = amd8111e_read_mib(mmio, rcv_miss_pkts); 923 924 /* stats.rx_missed_errors */ 925 new_stats->rx_missed_errors = amd8111e_read_mib(mmio, rcv_miss_pkts); 926 927 /* stats.tx_aborted_errors*/ 928 new_stats->tx_aborted_errors = 929 amd8111e_read_mib(mmio, xmt_excessive_collision); 930 931 /* stats.tx_carrier_errors*/ 932 new_stats->tx_carrier_errors = 933 amd8111e_read_mib(mmio, xmt_loss_carrier); 934 935 /* stats.tx_fifo_errors*/ 936 new_stats->tx_fifo_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts); 937 938 /* stats.tx_window_errors*/ 939 new_stats->tx_window_errors = 940 amd8111e_read_mib(mmio, xmt_late_collision); 941 942 /* Reset the mibs for collecting new statistics */ 943 /* writew(MIB_CLEAR, mmio + MIB_ADDR);*/ 944 945 spin_unlock_irqrestore(&lp->lock, flags); 946 947 return new_stats; 948 } 949 950 /* This function recalculate the interrupt coalescing mode on every interrupt 951 * according to the datarate and the packet rate. 952 */ 953 static int amd8111e_calc_coalesce(struct net_device *dev) 954 { 955 struct amd8111e_priv *lp = netdev_priv(dev); 956 struct amd8111e_coalesce_conf *coal_conf = &lp->coal_conf; 957 int tx_pkt_rate; 958 int rx_pkt_rate; 959 int tx_data_rate; 960 int rx_data_rate; 961 int rx_pkt_size; 962 int tx_pkt_size; 963 964 tx_pkt_rate = coal_conf->tx_packets - coal_conf->tx_prev_packets; 965 coal_conf->tx_prev_packets = coal_conf->tx_packets; 966 967 tx_data_rate = coal_conf->tx_bytes - coal_conf->tx_prev_bytes; 968 coal_conf->tx_prev_bytes = coal_conf->tx_bytes; 969 970 rx_pkt_rate = coal_conf->rx_packets - coal_conf->rx_prev_packets; 971 coal_conf->rx_prev_packets = coal_conf->rx_packets; 972 973 rx_data_rate = coal_conf->rx_bytes - coal_conf->rx_prev_bytes; 974 coal_conf->rx_prev_bytes = coal_conf->rx_bytes; 975 976 if (rx_pkt_rate < 800) { 977 if (coal_conf->rx_coal_type != NO_COALESCE) { 978 979 coal_conf->rx_timeout = 0x0; 980 coal_conf->rx_event_count = 0; 981 amd8111e_set_coalesce(dev, RX_INTR_COAL); 982 coal_conf->rx_coal_type = NO_COALESCE; 983 } 984 } else { 985 986 rx_pkt_size = rx_data_rate/rx_pkt_rate; 987 if (rx_pkt_size < 128) { 988 if (coal_conf->rx_coal_type != NO_COALESCE) { 989 990 coal_conf->rx_timeout = 0; 991 coal_conf->rx_event_count = 0; 992 amd8111e_set_coalesce(dev, RX_INTR_COAL); 993 coal_conf->rx_coal_type = NO_COALESCE; 994 } 995 996 } else if ((rx_pkt_size >= 128) && (rx_pkt_size < 512)) { 997 998 if (coal_conf->rx_coal_type != LOW_COALESCE) { 999 coal_conf->rx_timeout = 1; 1000 coal_conf->rx_event_count = 4; 1001 amd8111e_set_coalesce(dev, RX_INTR_COAL); 1002 coal_conf->rx_coal_type = LOW_COALESCE; 1003 } 1004 } else if ((rx_pkt_size >= 512) && (rx_pkt_size < 1024)) { 1005 1006 if (coal_conf->rx_coal_type != MEDIUM_COALESCE) { 1007 coal_conf->rx_timeout = 1; 1008 coal_conf->rx_event_count = 4; 1009 amd8111e_set_coalesce(dev, RX_INTR_COAL); 1010 coal_conf->rx_coal_type = MEDIUM_COALESCE; 1011 } 1012 1013 } else if (rx_pkt_size >= 1024) { 1014 1015 if (coal_conf->rx_coal_type != HIGH_COALESCE) { 1016 coal_conf->rx_timeout = 2; 1017 coal_conf->rx_event_count = 3; 1018 amd8111e_set_coalesce(dev, RX_INTR_COAL); 1019 coal_conf->rx_coal_type = HIGH_COALESCE; 1020 } 1021 } 1022 } 1023 /* NOW FOR TX INTR COALESC */ 1024 if (tx_pkt_rate < 800) { 1025 if (coal_conf->tx_coal_type != NO_COALESCE) { 1026 1027 coal_conf->tx_timeout = 0x0; 1028 coal_conf->tx_event_count = 0; 1029 amd8111e_set_coalesce(dev, TX_INTR_COAL); 1030 coal_conf->tx_coal_type = NO_COALESCE; 1031 } 1032 } else { 1033 1034 tx_pkt_size = tx_data_rate/tx_pkt_rate; 1035 if (tx_pkt_size < 128) { 1036 1037 if (coal_conf->tx_coal_type != NO_COALESCE) { 1038 1039 coal_conf->tx_timeout = 0; 1040 coal_conf->tx_event_count = 0; 1041 amd8111e_set_coalesce(dev, TX_INTR_COAL); 1042 coal_conf->tx_coal_type = NO_COALESCE; 1043 } 1044 1045 } else if ((tx_pkt_size >= 128) && (tx_pkt_size < 512)) { 1046 1047 if (coal_conf->tx_coal_type != LOW_COALESCE) { 1048 coal_conf->tx_timeout = 1; 1049 coal_conf->tx_event_count = 2; 1050 amd8111e_set_coalesce(dev, TX_INTR_COAL); 1051 coal_conf->tx_coal_type = LOW_COALESCE; 1052 1053 } 1054 } else if ((tx_pkt_size >= 512) && (tx_pkt_size < 1024)) { 1055 1056 if (coal_conf->tx_coal_type != MEDIUM_COALESCE) { 1057 coal_conf->tx_timeout = 2; 1058 coal_conf->tx_event_count = 5; 1059 amd8111e_set_coalesce(dev, TX_INTR_COAL); 1060 coal_conf->tx_coal_type = MEDIUM_COALESCE; 1061 } 1062 } else if (tx_pkt_size >= 1024) { 1063 if (coal_conf->tx_coal_type != HIGH_COALESCE) { 1064 coal_conf->tx_timeout = 4; 1065 coal_conf->tx_event_count = 8; 1066 amd8111e_set_coalesce(dev, TX_INTR_COAL); 1067 coal_conf->tx_coal_type = HIGH_COALESCE; 1068 } 1069 } 1070 } 1071 return 0; 1072 1073 } 1074 1075 /* This is device interrupt function. It handles transmit, 1076 * receive,link change and hardware timer interrupts. 1077 */ 1078 static irqreturn_t amd8111e_interrupt(int irq, void *dev_id) 1079 { 1080 1081 struct net_device *dev = (struct net_device *)dev_id; 1082 struct amd8111e_priv *lp = netdev_priv(dev); 1083 void __iomem *mmio = lp->mmio; 1084 unsigned int intr0, intren0; 1085 unsigned int handled = 1; 1086 1087 if (unlikely(dev == NULL)) 1088 return IRQ_NONE; 1089 1090 spin_lock(&lp->lock); 1091 1092 /* disabling interrupt */ 1093 writel(INTREN, mmio + CMD0); 1094 1095 /* Read interrupt status */ 1096 intr0 = readl(mmio + INT0); 1097 intren0 = readl(mmio + INTEN0); 1098 1099 /* Process all the INT event until INTR bit is clear. */ 1100 1101 if (!(intr0 & INTR)) { 1102 handled = 0; 1103 goto err_no_interrupt; 1104 } 1105 1106 /* Current driver processes 4 interrupts : RINT,TINT,LCINT,STINT */ 1107 writel(intr0, mmio + INT0); 1108 1109 /* Check if Receive Interrupt has occurred. */ 1110 if (intr0 & RINT0) { 1111 if (napi_schedule_prep(&lp->napi)) { 1112 /* Disable receive interupts */ 1113 writel(RINTEN0, mmio + INTEN0); 1114 /* Schedule a polling routine */ 1115 __napi_schedule(&lp->napi); 1116 } else if (intren0 & RINTEN0) { 1117 netdev_dbg(dev, "************Driver bug! interrupt while in poll\n"); 1118 /* Fix by disable receive interrupts */ 1119 writel(RINTEN0, mmio + INTEN0); 1120 } 1121 } 1122 1123 /* Check if Transmit Interrupt has occurred. */ 1124 if (intr0 & TINT0) 1125 amd8111e_tx(dev); 1126 1127 /* Check if Link Change Interrupt has occurred. */ 1128 if (intr0 & LCINT) 1129 amd8111e_link_change(dev); 1130 1131 /* Check if Hardware Timer Interrupt has occurred. */ 1132 if (intr0 & STINT) 1133 amd8111e_calc_coalesce(dev); 1134 1135 err_no_interrupt: 1136 writel(VAL0 | INTREN, mmio + CMD0); 1137 1138 spin_unlock(&lp->lock); 1139 1140 return IRQ_RETVAL(handled); 1141 } 1142 1143 #ifdef CONFIG_NET_POLL_CONTROLLER 1144 static void amd8111e_poll(struct net_device *dev) 1145 { 1146 unsigned long flags; 1147 local_irq_save(flags); 1148 amd8111e_interrupt(0, dev); 1149 local_irq_restore(flags); 1150 } 1151 #endif 1152 1153 1154 /* This function closes the network interface and updates 1155 * the statistics so that most recent statistics will be 1156 * available after the interface is down. 1157 */ 1158 static int amd8111e_close(struct net_device *dev) 1159 { 1160 struct amd8111e_priv *lp = netdev_priv(dev); 1161 netif_stop_queue(dev); 1162 1163 napi_disable(&lp->napi); 1164 1165 spin_lock_irq(&lp->lock); 1166 1167 amd8111e_disable_interrupt(lp); 1168 amd8111e_stop_chip(lp); 1169 1170 /* Free transmit and receive skbs */ 1171 amd8111e_free_skbs(lp->amd8111e_net_dev); 1172 1173 netif_carrier_off(lp->amd8111e_net_dev); 1174 1175 /* Delete ipg timer */ 1176 if (lp->options & OPTION_DYN_IPG_ENABLE) 1177 del_timer_sync(&lp->ipg_data.ipg_timer); 1178 1179 spin_unlock_irq(&lp->lock); 1180 free_irq(dev->irq, dev); 1181 amd8111e_free_ring(lp); 1182 1183 /* Update the statistics before closing */ 1184 amd8111e_get_stats(dev); 1185 lp->opened = 0; 1186 return 0; 1187 } 1188 1189 /* This function opens new interface.It requests irq for the device, 1190 * initializes the device,buffers and descriptors, and starts the device. 1191 */ 1192 static int amd8111e_open(struct net_device *dev) 1193 { 1194 struct amd8111e_priv *lp = netdev_priv(dev); 1195 1196 if (dev->irq == 0 || request_irq(dev->irq, amd8111e_interrupt, 1197 IRQF_SHARED, dev->name, dev)) 1198 return -EAGAIN; 1199 1200 napi_enable(&lp->napi); 1201 1202 spin_lock_irq(&lp->lock); 1203 1204 amd8111e_init_hw_default(lp); 1205 1206 if (amd8111e_restart(dev)) { 1207 spin_unlock_irq(&lp->lock); 1208 napi_disable(&lp->napi); 1209 if (dev->irq) 1210 free_irq(dev->irq, dev); 1211 return -ENOMEM; 1212 } 1213 /* Start ipg timer */ 1214 if (lp->options & OPTION_DYN_IPG_ENABLE) { 1215 add_timer(&lp->ipg_data.ipg_timer); 1216 netdev_info(dev, "Dynamic IPG Enabled\n"); 1217 } 1218 1219 lp->opened = 1; 1220 1221 spin_unlock_irq(&lp->lock); 1222 1223 netif_start_queue(dev); 1224 1225 return 0; 1226 } 1227 1228 /* This function checks if there is any transmit descriptors 1229 * available to queue more packet. 1230 */ 1231 static int amd8111e_tx_queue_avail(struct amd8111e_priv *lp) 1232 { 1233 int tx_index = lp->tx_idx & TX_BUFF_MOD_MASK; 1234 if (lp->tx_skbuff[tx_index]) 1235 return -1; 1236 else 1237 return 0; 1238 1239 } 1240 1241 /* This function will queue the transmit packets to the 1242 * descriptors and will trigger the send operation. It also 1243 * initializes the transmit descriptors with buffer physical address, 1244 * byte count, ownership to hardware etc. 1245 */ 1246 static netdev_tx_t amd8111e_start_xmit(struct sk_buff *skb, 1247 struct net_device *dev) 1248 { 1249 struct amd8111e_priv *lp = netdev_priv(dev); 1250 int tx_index; 1251 unsigned long flags; 1252 1253 spin_lock_irqsave(&lp->lock, flags); 1254 1255 tx_index = lp->tx_idx & TX_RING_DR_MOD_MASK; 1256 1257 lp->tx_ring[tx_index].buff_count = cpu_to_le16(skb->len); 1258 1259 lp->tx_skbuff[tx_index] = skb; 1260 lp->tx_ring[tx_index].tx_flags = 0; 1261 1262 #if AMD8111E_VLAN_TAG_USED 1263 if (skb_vlan_tag_present(skb)) { 1264 lp->tx_ring[tx_index].tag_ctrl_cmd |= 1265 cpu_to_le16(TCC_VLAN_INSERT); 1266 lp->tx_ring[tx_index].tag_ctrl_info = 1267 cpu_to_le16(skb_vlan_tag_get(skb)); 1268 1269 } 1270 #endif 1271 lp->tx_dma_addr[tx_index] = 1272 dma_map_single(&lp->pci_dev->dev, skb->data, skb->len, 1273 DMA_TO_DEVICE); 1274 lp->tx_ring[tx_index].buff_phy_addr = 1275 cpu_to_le32(lp->tx_dma_addr[tx_index]); 1276 1277 /* Set FCS and LTINT bits */ 1278 wmb(); 1279 lp->tx_ring[tx_index].tx_flags |= 1280 cpu_to_le16(OWN_BIT | STP_BIT | ENP_BIT|ADD_FCS_BIT|LTINT_BIT); 1281 1282 lp->tx_idx++; 1283 1284 /* Trigger an immediate send poll. */ 1285 writel(VAL1 | TDMD0, lp->mmio + CMD0); 1286 writel(VAL2 | RDMD0, lp->mmio + CMD0); 1287 1288 if (amd8111e_tx_queue_avail(lp) < 0) { 1289 netif_stop_queue(dev); 1290 } 1291 spin_unlock_irqrestore(&lp->lock, flags); 1292 return NETDEV_TX_OK; 1293 } 1294 /* This function returns all the memory mapped registers of the device. */ 1295 static void amd8111e_read_regs(struct amd8111e_priv *lp, u32 *buf) 1296 { 1297 void __iomem *mmio = lp->mmio; 1298 /* Read only necessary registers */ 1299 buf[0] = readl(mmio + XMT_RING_BASE_ADDR0); 1300 buf[1] = readl(mmio + XMT_RING_LEN0); 1301 buf[2] = readl(mmio + RCV_RING_BASE_ADDR0); 1302 buf[3] = readl(mmio + RCV_RING_LEN0); 1303 buf[4] = readl(mmio + CMD0); 1304 buf[5] = readl(mmio + CMD2); 1305 buf[6] = readl(mmio + CMD3); 1306 buf[7] = readl(mmio + CMD7); 1307 buf[8] = readl(mmio + INT0); 1308 buf[9] = readl(mmio + INTEN0); 1309 buf[10] = readl(mmio + LADRF); 1310 buf[11] = readl(mmio + LADRF+4); 1311 buf[12] = readl(mmio + STAT0); 1312 } 1313 1314 1315 /* This function sets promiscuos mode, all-multi mode or the multicast address 1316 * list to the device. 1317 */ 1318 static void amd8111e_set_multicast_list(struct net_device *dev) 1319 { 1320 struct netdev_hw_addr *ha; 1321 struct amd8111e_priv *lp = netdev_priv(dev); 1322 u32 mc_filter[2]; 1323 int bit_num; 1324 1325 if (dev->flags & IFF_PROMISC) { 1326 writel(VAL2 | PROM, lp->mmio + CMD2); 1327 return; 1328 } 1329 else 1330 writel(PROM, lp->mmio + CMD2); 1331 if (dev->flags & IFF_ALLMULTI || 1332 netdev_mc_count(dev) > MAX_FILTER_SIZE) { 1333 /* get all multicast packet */ 1334 mc_filter[1] = mc_filter[0] = 0xffffffff; 1335 lp->options |= OPTION_MULTICAST_ENABLE; 1336 amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF); 1337 return; 1338 } 1339 if (netdev_mc_empty(dev)) { 1340 /* get only own packets */ 1341 mc_filter[1] = mc_filter[0] = 0; 1342 lp->options &= ~OPTION_MULTICAST_ENABLE; 1343 amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF); 1344 /* disable promiscuous mode */ 1345 writel(PROM, lp->mmio + CMD2); 1346 return; 1347 } 1348 /* load all the multicast addresses in the logic filter */ 1349 lp->options |= OPTION_MULTICAST_ENABLE; 1350 mc_filter[1] = mc_filter[0] = 0; 1351 netdev_for_each_mc_addr(ha, dev) { 1352 bit_num = (ether_crc_le(ETH_ALEN, ha->addr) >> 26) & 0x3f; 1353 mc_filter[bit_num >> 5] |= 1 << (bit_num & 31); 1354 } 1355 amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF); 1356 1357 /* To eliminate PCI posting bug */ 1358 readl(lp->mmio + CMD2); 1359 1360 } 1361 1362 static void amd8111e_get_drvinfo(struct net_device *dev, 1363 struct ethtool_drvinfo *info) 1364 { 1365 struct amd8111e_priv *lp = netdev_priv(dev); 1366 struct pci_dev *pci_dev = lp->pci_dev; 1367 strlcpy(info->driver, MODULE_NAME, sizeof(info->driver)); 1368 snprintf(info->fw_version, sizeof(info->fw_version), 1369 "%u", chip_version); 1370 strlcpy(info->bus_info, pci_name(pci_dev), sizeof(info->bus_info)); 1371 } 1372 1373 static int amd8111e_get_regs_len(struct net_device *dev) 1374 { 1375 return AMD8111E_REG_DUMP_LEN; 1376 } 1377 1378 static void amd8111e_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf) 1379 { 1380 struct amd8111e_priv *lp = netdev_priv(dev); 1381 regs->version = 0; 1382 amd8111e_read_regs(lp, buf); 1383 } 1384 1385 static int amd8111e_get_link_ksettings(struct net_device *dev, 1386 struct ethtool_link_ksettings *cmd) 1387 { 1388 struct amd8111e_priv *lp = netdev_priv(dev); 1389 spin_lock_irq(&lp->lock); 1390 mii_ethtool_get_link_ksettings(&lp->mii_if, cmd); 1391 spin_unlock_irq(&lp->lock); 1392 return 0; 1393 } 1394 1395 static int amd8111e_set_link_ksettings(struct net_device *dev, 1396 const struct ethtool_link_ksettings *cmd) 1397 { 1398 struct amd8111e_priv *lp = netdev_priv(dev); 1399 int res; 1400 spin_lock_irq(&lp->lock); 1401 res = mii_ethtool_set_link_ksettings(&lp->mii_if, cmd); 1402 spin_unlock_irq(&lp->lock); 1403 return res; 1404 } 1405 1406 static int amd8111e_nway_reset(struct net_device *dev) 1407 { 1408 struct amd8111e_priv *lp = netdev_priv(dev); 1409 return mii_nway_restart(&lp->mii_if); 1410 } 1411 1412 static u32 amd8111e_get_link(struct net_device *dev) 1413 { 1414 struct amd8111e_priv *lp = netdev_priv(dev); 1415 return mii_link_ok(&lp->mii_if); 1416 } 1417 1418 static void amd8111e_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info) 1419 { 1420 struct amd8111e_priv *lp = netdev_priv(dev); 1421 wol_info->supported = WAKE_MAGIC|WAKE_PHY; 1422 if (lp->options & OPTION_WOL_ENABLE) 1423 wol_info->wolopts = WAKE_MAGIC; 1424 } 1425 1426 static int amd8111e_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info) 1427 { 1428 struct amd8111e_priv *lp = netdev_priv(dev); 1429 if (wol_info->wolopts & ~(WAKE_MAGIC|WAKE_PHY)) 1430 return -EINVAL; 1431 spin_lock_irq(&lp->lock); 1432 if (wol_info->wolopts & WAKE_MAGIC) 1433 lp->options |= 1434 (OPTION_WOL_ENABLE | OPTION_WAKE_MAGIC_ENABLE); 1435 else if (wol_info->wolopts & WAKE_PHY) 1436 lp->options |= 1437 (OPTION_WOL_ENABLE | OPTION_WAKE_PHY_ENABLE); 1438 else 1439 lp->options &= ~OPTION_WOL_ENABLE; 1440 spin_unlock_irq(&lp->lock); 1441 return 0; 1442 } 1443 1444 static const struct ethtool_ops ops = { 1445 .get_drvinfo = amd8111e_get_drvinfo, 1446 .get_regs_len = amd8111e_get_regs_len, 1447 .get_regs = amd8111e_get_regs, 1448 .nway_reset = amd8111e_nway_reset, 1449 .get_link = amd8111e_get_link, 1450 .get_wol = amd8111e_get_wol, 1451 .set_wol = amd8111e_set_wol, 1452 .get_link_ksettings = amd8111e_get_link_ksettings, 1453 .set_link_ksettings = amd8111e_set_link_ksettings, 1454 }; 1455 1456 /* This function handles all the ethtool ioctls. It gives driver info, 1457 * gets/sets driver speed, gets memory mapped register values, forces 1458 * auto negotiation, sets/gets WOL options for ethtool application. 1459 */ 1460 static int amd8111e_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) 1461 { 1462 struct mii_ioctl_data *data = if_mii(ifr); 1463 struct amd8111e_priv *lp = netdev_priv(dev); 1464 int err; 1465 u32 mii_regval; 1466 1467 switch (cmd) { 1468 case SIOCGMIIPHY: 1469 data->phy_id = lp->ext_phy_addr; 1470 1471 fallthrough; 1472 case SIOCGMIIREG: 1473 1474 spin_lock_irq(&lp->lock); 1475 err = amd8111e_read_phy(lp, data->phy_id, 1476 data->reg_num & PHY_REG_ADDR_MASK, &mii_regval); 1477 spin_unlock_irq(&lp->lock); 1478 1479 data->val_out = mii_regval; 1480 return err; 1481 1482 case SIOCSMIIREG: 1483 1484 spin_lock_irq(&lp->lock); 1485 err = amd8111e_write_phy(lp, data->phy_id, 1486 data->reg_num & PHY_REG_ADDR_MASK, data->val_in); 1487 spin_unlock_irq(&lp->lock); 1488 1489 return err; 1490 1491 default: 1492 /* do nothing */ 1493 break; 1494 } 1495 return -EOPNOTSUPP; 1496 } 1497 static int amd8111e_set_mac_address(struct net_device *dev, void *p) 1498 { 1499 struct amd8111e_priv *lp = netdev_priv(dev); 1500 int i; 1501 struct sockaddr *addr = p; 1502 1503 eth_hw_addr_set(dev, addr->sa_data); 1504 spin_lock_irq(&lp->lock); 1505 /* Setting the MAC address to the device */ 1506 for (i = 0; i < ETH_ALEN; i++) 1507 writeb(dev->dev_addr[i], lp->mmio + PADR + i); 1508 1509 spin_unlock_irq(&lp->lock); 1510 1511 return 0; 1512 } 1513 1514 /* This function changes the mtu of the device. It restarts the device to 1515 * initialize the descriptor with new receive buffers. 1516 */ 1517 static int amd8111e_change_mtu(struct net_device *dev, int new_mtu) 1518 { 1519 struct amd8111e_priv *lp = netdev_priv(dev); 1520 int err; 1521 1522 if (!netif_running(dev)) { 1523 /* new_mtu will be used 1524 * when device starts netxt time 1525 */ 1526 dev->mtu = new_mtu; 1527 return 0; 1528 } 1529 1530 spin_lock_irq(&lp->lock); 1531 1532 /* stop the chip */ 1533 writel(RUN, lp->mmio + CMD0); 1534 1535 dev->mtu = new_mtu; 1536 1537 err = amd8111e_restart(dev); 1538 spin_unlock_irq(&lp->lock); 1539 if (!err) 1540 netif_start_queue(dev); 1541 return err; 1542 } 1543 1544 static int amd8111e_enable_magicpkt(struct amd8111e_priv *lp) 1545 { 1546 writel(VAL1 | MPPLBA, lp->mmio + CMD3); 1547 writel(VAL0 | MPEN_SW, lp->mmio + CMD7); 1548 1549 /* To eliminate PCI posting bug */ 1550 readl(lp->mmio + CMD7); 1551 return 0; 1552 } 1553 1554 static int amd8111e_enable_link_change(struct amd8111e_priv *lp) 1555 { 1556 1557 /* Adapter is already stoped/suspended/interrupt-disabled */ 1558 writel(VAL0 | LCMODE_SW, lp->mmio + CMD7); 1559 1560 /* To eliminate PCI posting bug */ 1561 readl(lp->mmio + CMD7); 1562 return 0; 1563 } 1564 1565 /* This function is called when a packet transmission fails to complete 1566 * within a reasonable period, on the assumption that an interrupt have 1567 * failed or the interface is locked up. This function will reinitialize 1568 * the hardware. 1569 */ 1570 static void amd8111e_tx_timeout(struct net_device *dev, unsigned int txqueue) 1571 { 1572 struct amd8111e_priv *lp = netdev_priv(dev); 1573 int err; 1574 1575 netdev_err(dev, "transmit timed out, resetting\n"); 1576 1577 spin_lock_irq(&lp->lock); 1578 err = amd8111e_restart(dev); 1579 spin_unlock_irq(&lp->lock); 1580 if (!err) 1581 netif_wake_queue(dev); 1582 } 1583 1584 static int __maybe_unused amd8111e_suspend(struct device *dev_d) 1585 { 1586 struct net_device *dev = dev_get_drvdata(dev_d); 1587 struct amd8111e_priv *lp = netdev_priv(dev); 1588 1589 if (!netif_running(dev)) 1590 return 0; 1591 1592 /* disable the interrupt */ 1593 spin_lock_irq(&lp->lock); 1594 amd8111e_disable_interrupt(lp); 1595 spin_unlock_irq(&lp->lock); 1596 1597 netif_device_detach(dev); 1598 1599 /* stop chip */ 1600 spin_lock_irq(&lp->lock); 1601 if (lp->options & OPTION_DYN_IPG_ENABLE) 1602 del_timer_sync(&lp->ipg_data.ipg_timer); 1603 amd8111e_stop_chip(lp); 1604 spin_unlock_irq(&lp->lock); 1605 1606 if (lp->options & OPTION_WOL_ENABLE) { 1607 /* enable wol */ 1608 if (lp->options & OPTION_WAKE_MAGIC_ENABLE) 1609 amd8111e_enable_magicpkt(lp); 1610 if (lp->options & OPTION_WAKE_PHY_ENABLE) 1611 amd8111e_enable_link_change(lp); 1612 1613 device_set_wakeup_enable(dev_d, 1); 1614 1615 } else { 1616 device_set_wakeup_enable(dev_d, 0); 1617 } 1618 1619 return 0; 1620 } 1621 1622 static int __maybe_unused amd8111e_resume(struct device *dev_d) 1623 { 1624 struct net_device *dev = dev_get_drvdata(dev_d); 1625 struct amd8111e_priv *lp = netdev_priv(dev); 1626 1627 if (!netif_running(dev)) 1628 return 0; 1629 1630 netif_device_attach(dev); 1631 1632 spin_lock_irq(&lp->lock); 1633 amd8111e_restart(dev); 1634 /* Restart ipg timer */ 1635 if (lp->options & OPTION_DYN_IPG_ENABLE) 1636 mod_timer(&lp->ipg_data.ipg_timer, 1637 jiffies + IPG_CONVERGE_JIFFIES); 1638 spin_unlock_irq(&lp->lock); 1639 1640 return 0; 1641 } 1642 1643 static void amd8111e_config_ipg(struct timer_list *t) 1644 { 1645 struct amd8111e_priv *lp = from_timer(lp, t, ipg_data.ipg_timer); 1646 struct ipg_info *ipg_data = &lp->ipg_data; 1647 void __iomem *mmio = lp->mmio; 1648 unsigned int prev_col_cnt = ipg_data->col_cnt; 1649 unsigned int total_col_cnt; 1650 unsigned int tmp_ipg; 1651 1652 if (lp->link_config.duplex == DUPLEX_FULL) { 1653 ipg_data->ipg = DEFAULT_IPG; 1654 return; 1655 } 1656 1657 if (ipg_data->ipg_state == SSTATE) { 1658 1659 if (ipg_data->timer_tick == IPG_STABLE_TIME) { 1660 1661 ipg_data->timer_tick = 0; 1662 ipg_data->ipg = MIN_IPG - IPG_STEP; 1663 ipg_data->current_ipg = MIN_IPG; 1664 ipg_data->diff_col_cnt = 0xFFFFFFFF; 1665 ipg_data->ipg_state = CSTATE; 1666 } 1667 else 1668 ipg_data->timer_tick++; 1669 } 1670 1671 if (ipg_data->ipg_state == CSTATE) { 1672 1673 /* Get the current collision count */ 1674 1675 total_col_cnt = ipg_data->col_cnt = 1676 amd8111e_read_mib(mmio, xmt_collisions); 1677 1678 if ((total_col_cnt - prev_col_cnt) < 1679 (ipg_data->diff_col_cnt)) { 1680 1681 ipg_data->diff_col_cnt = 1682 total_col_cnt - prev_col_cnt; 1683 1684 ipg_data->ipg = ipg_data->current_ipg; 1685 } 1686 1687 ipg_data->current_ipg += IPG_STEP; 1688 1689 if (ipg_data->current_ipg <= MAX_IPG) 1690 tmp_ipg = ipg_data->current_ipg; 1691 else { 1692 tmp_ipg = ipg_data->ipg; 1693 ipg_data->ipg_state = SSTATE; 1694 } 1695 writew((u32)tmp_ipg, mmio + IPG); 1696 writew((u32)(tmp_ipg - IFS1_DELTA), mmio + IFS1); 1697 } 1698 mod_timer(&lp->ipg_data.ipg_timer, jiffies + IPG_CONVERGE_JIFFIES); 1699 return; 1700 1701 } 1702 1703 static void amd8111e_probe_ext_phy(struct net_device *dev) 1704 { 1705 struct amd8111e_priv *lp = netdev_priv(dev); 1706 int i; 1707 1708 for (i = 0x1e; i >= 0; i--) { 1709 u32 id1, id2; 1710 1711 if (amd8111e_read_phy(lp, i, MII_PHYSID1, &id1)) 1712 continue; 1713 if (amd8111e_read_phy(lp, i, MII_PHYSID2, &id2)) 1714 continue; 1715 lp->ext_phy_id = (id1 << 16) | id2; 1716 lp->ext_phy_addr = i; 1717 return; 1718 } 1719 lp->ext_phy_id = 0; 1720 lp->ext_phy_addr = 1; 1721 } 1722 1723 static const struct net_device_ops amd8111e_netdev_ops = { 1724 .ndo_open = amd8111e_open, 1725 .ndo_stop = amd8111e_close, 1726 .ndo_start_xmit = amd8111e_start_xmit, 1727 .ndo_tx_timeout = amd8111e_tx_timeout, 1728 .ndo_get_stats = amd8111e_get_stats, 1729 .ndo_set_rx_mode = amd8111e_set_multicast_list, 1730 .ndo_validate_addr = eth_validate_addr, 1731 .ndo_set_mac_address = amd8111e_set_mac_address, 1732 .ndo_eth_ioctl = amd8111e_ioctl, 1733 .ndo_change_mtu = amd8111e_change_mtu, 1734 #ifdef CONFIG_NET_POLL_CONTROLLER 1735 .ndo_poll_controller = amd8111e_poll, 1736 #endif 1737 }; 1738 1739 static int amd8111e_probe_one(struct pci_dev *pdev, 1740 const struct pci_device_id *ent) 1741 { 1742 int err, i; 1743 unsigned long reg_addr, reg_len; 1744 struct amd8111e_priv *lp; 1745 struct net_device *dev; 1746 u8 addr[ETH_ALEN]; 1747 1748 err = pci_enable_device(pdev); 1749 if (err) { 1750 dev_err(&pdev->dev, "Cannot enable new PCI device\n"); 1751 return err; 1752 } 1753 1754 if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { 1755 dev_err(&pdev->dev, "Cannot find PCI base address\n"); 1756 err = -ENODEV; 1757 goto err_disable_pdev; 1758 } 1759 1760 err = pci_request_regions(pdev, MODULE_NAME); 1761 if (err) { 1762 dev_err(&pdev->dev, "Cannot obtain PCI resources\n"); 1763 goto err_disable_pdev; 1764 } 1765 1766 pci_set_master(pdev); 1767 1768 /* Find power-management capability. */ 1769 if (!pdev->pm_cap) { 1770 dev_err(&pdev->dev, "No Power Management capability\n"); 1771 err = -ENODEV; 1772 goto err_free_reg; 1773 } 1774 1775 /* Initialize DMA */ 1776 if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)) < 0) { 1777 dev_err(&pdev->dev, "DMA not supported\n"); 1778 err = -ENODEV; 1779 goto err_free_reg; 1780 } 1781 1782 reg_addr = pci_resource_start(pdev, 0); 1783 reg_len = pci_resource_len(pdev, 0); 1784 1785 dev = alloc_etherdev(sizeof(struct amd8111e_priv)); 1786 if (!dev) { 1787 err = -ENOMEM; 1788 goto err_free_reg; 1789 } 1790 1791 SET_NETDEV_DEV(dev, &pdev->dev); 1792 1793 #if AMD8111E_VLAN_TAG_USED 1794 dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX; 1795 #endif 1796 1797 lp = netdev_priv(dev); 1798 lp->pci_dev = pdev; 1799 lp->amd8111e_net_dev = dev; 1800 lp->pm_cap = pdev->pm_cap; 1801 1802 spin_lock_init(&lp->lock); 1803 1804 lp->mmio = devm_ioremap(&pdev->dev, reg_addr, reg_len); 1805 if (!lp->mmio) { 1806 dev_err(&pdev->dev, "Cannot map device registers\n"); 1807 err = -ENOMEM; 1808 goto err_free_dev; 1809 } 1810 1811 /* Initializing MAC address */ 1812 for (i = 0; i < ETH_ALEN; i++) 1813 addr[i] = readb(lp->mmio + PADR + i); 1814 eth_hw_addr_set(dev, addr); 1815 1816 /* Setting user defined parametrs */ 1817 lp->ext_phy_option = speed_duplex[card_idx]; 1818 if (coalesce[card_idx]) 1819 lp->options |= OPTION_INTR_COAL_ENABLE; 1820 if (dynamic_ipg[card_idx++]) 1821 lp->options |= OPTION_DYN_IPG_ENABLE; 1822 1823 1824 /* Initialize driver entry points */ 1825 dev->netdev_ops = &amd8111e_netdev_ops; 1826 dev->ethtool_ops = &ops; 1827 dev->irq = pdev->irq; 1828 dev->watchdog_timeo = AMD8111E_TX_TIMEOUT; 1829 dev->min_mtu = AMD8111E_MIN_MTU; 1830 dev->max_mtu = AMD8111E_MAX_MTU; 1831 netif_napi_add_weight(dev, &lp->napi, amd8111e_rx_poll, 32); 1832 1833 #if AMD8111E_VLAN_TAG_USED 1834 dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX; 1835 #endif 1836 /* Probe the external PHY */ 1837 amd8111e_probe_ext_phy(dev); 1838 1839 /* setting mii default values */ 1840 lp->mii_if.dev = dev; 1841 lp->mii_if.mdio_read = amd8111e_mdio_read; 1842 lp->mii_if.mdio_write = amd8111e_mdio_write; 1843 lp->mii_if.phy_id = lp->ext_phy_addr; 1844 1845 /* Set receive buffer length and set jumbo option*/ 1846 amd8111e_set_rx_buff_len(dev); 1847 1848 1849 err = register_netdev(dev); 1850 if (err) { 1851 dev_err(&pdev->dev, "Cannot register net device\n"); 1852 goto err_free_dev; 1853 } 1854 1855 pci_set_drvdata(pdev, dev); 1856 1857 /* Initialize software ipg timer */ 1858 if (lp->options & OPTION_DYN_IPG_ENABLE) { 1859 timer_setup(&lp->ipg_data.ipg_timer, amd8111e_config_ipg, 0); 1860 lp->ipg_data.ipg_timer.expires = jiffies + 1861 IPG_CONVERGE_JIFFIES; 1862 lp->ipg_data.ipg = DEFAULT_IPG; 1863 lp->ipg_data.ipg_state = CSTATE; 1864 } 1865 1866 /* display driver and device information */ 1867 chip_version = (readl(lp->mmio + CHIPID) & 0xf0000000) >> 28; 1868 dev_info(&pdev->dev, "[ Rev %x ] PCI 10/100BaseT Ethernet %pM\n", 1869 chip_version, dev->dev_addr); 1870 if (lp->ext_phy_id) 1871 dev_info(&pdev->dev, "Found MII PHY ID 0x%08x at address 0x%02x\n", 1872 lp->ext_phy_id, lp->ext_phy_addr); 1873 else 1874 dev_info(&pdev->dev, "Couldn't detect MII PHY, assuming address 0x01\n"); 1875 1876 return 0; 1877 1878 err_free_dev: 1879 free_netdev(dev); 1880 1881 err_free_reg: 1882 pci_release_regions(pdev); 1883 1884 err_disable_pdev: 1885 pci_disable_device(pdev); 1886 return err; 1887 1888 } 1889 1890 static void amd8111e_remove_one(struct pci_dev *pdev) 1891 { 1892 struct net_device *dev = pci_get_drvdata(pdev); 1893 1894 if (dev) { 1895 unregister_netdev(dev); 1896 free_netdev(dev); 1897 pci_release_regions(pdev); 1898 pci_disable_device(pdev); 1899 } 1900 } 1901 1902 static const struct pci_device_id amd8111e_pci_tbl[] = { 1903 { 1904 .vendor = PCI_VENDOR_ID_AMD, 1905 .device = PCI_DEVICE_ID_AMD8111E_7462, 1906 }, 1907 { 1908 .vendor = 0, 1909 } 1910 }; 1911 MODULE_DEVICE_TABLE(pci, amd8111e_pci_tbl); 1912 1913 static SIMPLE_DEV_PM_OPS(amd8111e_pm_ops, amd8111e_suspend, amd8111e_resume); 1914 1915 static struct pci_driver amd8111e_driver = { 1916 .name = MODULE_NAME, 1917 .id_table = amd8111e_pci_tbl, 1918 .probe = amd8111e_probe_one, 1919 .remove = amd8111e_remove_one, 1920 .driver.pm = &amd8111e_pm_ops 1921 }; 1922 1923 module_pci_driver(amd8111e_driver); 1924