1 2 /* Advanced Micro Devices Inc. AMD8111E Linux Network Driver 3 * Copyright (C) 2004 Advanced Micro Devices 4 * 5 * 6 * Copyright 2001,2002 Jeff Garzik <jgarzik@mandrakesoft.com> [ 8139cp.c,tg3.c ] 7 * Copyright (C) 2001, 2002 David S. Miller (davem@redhat.com)[ tg3.c] 8 * Copyright 1996-1999 Thomas Bogendoerfer [ pcnet32.c ] 9 * Derived from the lance driver written 1993,1994,1995 by Donald Becker. 10 * Copyright 1993 United States Government as represented by the 11 * Director, National Security Agency.[ pcnet32.c ] 12 * Carsten Langgaard, carstenl@mips.com [ pcnet32.c ] 13 * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. 14 * 15 * 16 * This program is free software; you can redistribute it and/or modify 17 * it under the terms of the GNU General Public License as published by 18 * the Free Software Foundation; either version 2 of the License, or 19 * (at your option) any later version. 20 * 21 * This program is distributed in the hope that it will be useful, 22 * but WITHOUT ANY WARRANTY; without even the implied warranty of 23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 24 * GNU General Public License for more details. 25 * 26 * You should have received a copy of the GNU General Public License 27 * along with this program; if not, write to the Free Software 28 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 29 * USA 30 31 Module Name: 32 33 amd8111e.c 34 35 Abstract: 36 37 AMD8111 based 10/100 Ethernet Controller Driver. 38 39 Environment: 40 41 Kernel Mode 42 43 Revision History: 44 3.0.0 45 Initial Revision. 46 3.0.1 47 1. Dynamic interrupt coalescing. 48 2. Removed prev_stats. 49 3. MII support. 50 4. Dynamic IPG support 51 3.0.2 05/29/2003 52 1. Bug fix: Fixed failure to send jumbo packets larger than 4k. 53 2. Bug fix: Fixed VLAN support failure. 54 3. Bug fix: Fixed receive interrupt coalescing bug. 55 4. Dynamic IPG support is disabled by default. 56 3.0.3 06/05/2003 57 1. Bug fix: Fixed failure to close the interface if SMP is enabled. 58 3.0.4 12/09/2003 59 1. Added set_mac_address routine for bonding driver support. 60 2. Tested the driver for bonding support 61 3. Bug fix: Fixed mismach in actual receive buffer lenth and lenth 62 indicated to the h/w. 63 4. Modified amd8111e_rx() routine to receive all the received packets 64 in the first interrupt. 65 5. Bug fix: Corrected rx_errors reported in get_stats() function. 66 3.0.5 03/22/2004 67 1. Added NAPI support 68 69 */ 70 71 72 #include <linux/module.h> 73 #include <linux/kernel.h> 74 #include <linux/types.h> 75 #include <linux/compiler.h> 76 #include <linux/delay.h> 77 #include <linux/init.h> 78 #include <linux/interrupt.h> 79 #include <linux/ioport.h> 80 #include <linux/pci.h> 81 #include <linux/netdevice.h> 82 #include <linux/etherdevice.h> 83 #include <linux/skbuff.h> 84 #include <linux/ethtool.h> 85 #include <linux/mii.h> 86 #include <linux/if_vlan.h> 87 #include <linux/ctype.h> 88 #include <linux/crc32.h> 89 #include <linux/dma-mapping.h> 90 91 #include <asm/system.h> 92 #include <asm/io.h> 93 #include <asm/byteorder.h> 94 #include <asm/uaccess.h> 95 96 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) 97 #define AMD8111E_VLAN_TAG_USED 1 98 #else 99 #define AMD8111E_VLAN_TAG_USED 0 100 #endif 101 102 #include "amd8111e.h" 103 #define MODULE_NAME "amd8111e" 104 #define MODULE_VERS "3.0.7" 105 MODULE_AUTHOR("Advanced Micro Devices, Inc."); 106 MODULE_DESCRIPTION ("AMD8111 based 10/100 Ethernet Controller. Driver Version "MODULE_VERS); 107 MODULE_LICENSE("GPL"); 108 MODULE_DEVICE_TABLE(pci, amd8111e_pci_tbl); 109 module_param_array(speed_duplex, int, NULL, 0); 110 MODULE_PARM_DESC(speed_duplex, "Set device speed and duplex modes, 0: Auto Negotiate, 1: 10Mbps Half Duplex, 2: 10Mbps Full Duplex, 3: 100Mbps Half Duplex, 4: 100Mbps Full Duplex"); 111 module_param_array(coalesce, bool, NULL, 0); 112 MODULE_PARM_DESC(coalesce, "Enable or Disable interrupt coalescing, 1: Enable, 0: Disable"); 113 module_param_array(dynamic_ipg, bool, NULL, 0); 114 MODULE_PARM_DESC(dynamic_ipg, "Enable or Disable dynamic IPG, 1: Enable, 0: Disable"); 115 116 static DEFINE_PCI_DEVICE_TABLE(amd8111e_pci_tbl) = { 117 118 { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD8111E_7462, 119 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, 120 { 0, } 121 122 }; 123 /* 124 This function will read the PHY registers. 125 */ 126 static int amd8111e_read_phy(struct amd8111e_priv* lp, int phy_id, int reg, u32* val) 127 { 128 void __iomem *mmio = lp->mmio; 129 unsigned int reg_val; 130 unsigned int repeat= REPEAT_CNT; 131 132 reg_val = readl(mmio + PHY_ACCESS); 133 while (reg_val & PHY_CMD_ACTIVE) 134 reg_val = readl( mmio + PHY_ACCESS ); 135 136 writel( PHY_RD_CMD | ((phy_id & 0x1f) << 21) | 137 ((reg & 0x1f) << 16), mmio +PHY_ACCESS); 138 do{ 139 reg_val = readl(mmio + PHY_ACCESS); 140 udelay(30); /* It takes 30 us to read/write data */ 141 } while (--repeat && (reg_val & PHY_CMD_ACTIVE)); 142 if(reg_val & PHY_RD_ERR) 143 goto err_phy_read; 144 145 *val = reg_val & 0xffff; 146 return 0; 147 err_phy_read: 148 *val = 0; 149 return -EINVAL; 150 151 } 152 153 /* 154 This function will write into PHY registers. 155 */ 156 static int amd8111e_write_phy(struct amd8111e_priv* lp,int phy_id, int reg, u32 val) 157 { 158 unsigned int repeat = REPEAT_CNT; 159 void __iomem *mmio = lp->mmio; 160 unsigned int reg_val; 161 162 reg_val = readl(mmio + PHY_ACCESS); 163 while (reg_val & PHY_CMD_ACTIVE) 164 reg_val = readl( mmio + PHY_ACCESS ); 165 166 writel( PHY_WR_CMD | ((phy_id & 0x1f) << 21) | 167 ((reg & 0x1f) << 16)|val, mmio + PHY_ACCESS); 168 169 do{ 170 reg_val = readl(mmio + PHY_ACCESS); 171 udelay(30); /* It takes 30 us to read/write the data */ 172 } while (--repeat && (reg_val & PHY_CMD_ACTIVE)); 173 174 if(reg_val & PHY_RD_ERR) 175 goto err_phy_write; 176 177 return 0; 178 179 err_phy_write: 180 return -EINVAL; 181 182 } 183 /* 184 This is the mii register read function provided to the mii interface. 185 */ 186 static int amd8111e_mdio_read(struct net_device * dev, int phy_id, int reg_num) 187 { 188 struct amd8111e_priv* lp = netdev_priv(dev); 189 unsigned int reg_val; 190 191 amd8111e_read_phy(lp,phy_id,reg_num,®_val); 192 return reg_val; 193 194 } 195 196 /* 197 This is the mii register write function provided to the mii interface. 198 */ 199 static void amd8111e_mdio_write(struct net_device * dev, int phy_id, int reg_num, int val) 200 { 201 struct amd8111e_priv* lp = netdev_priv(dev); 202 203 amd8111e_write_phy(lp, phy_id, reg_num, val); 204 } 205 206 /* 207 This function will set PHY speed. During initialization sets the original speed to 100 full. 208 */ 209 static void amd8111e_set_ext_phy(struct net_device *dev) 210 { 211 struct amd8111e_priv *lp = netdev_priv(dev); 212 u32 bmcr,advert,tmp; 213 214 /* Determine mii register values to set the speed */ 215 advert = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_ADVERTISE); 216 tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4); 217 switch (lp->ext_phy_option){ 218 219 default: 220 case SPEED_AUTONEG: /* advertise all values */ 221 tmp |= ( ADVERTISE_10HALF|ADVERTISE_10FULL| 222 ADVERTISE_100HALF|ADVERTISE_100FULL) ; 223 break; 224 case SPEED10_HALF: 225 tmp |= ADVERTISE_10HALF; 226 break; 227 case SPEED10_FULL: 228 tmp |= ADVERTISE_10FULL; 229 break; 230 case SPEED100_HALF: 231 tmp |= ADVERTISE_100HALF; 232 break; 233 case SPEED100_FULL: 234 tmp |= ADVERTISE_100FULL; 235 break; 236 } 237 238 if(advert != tmp) 239 amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_ADVERTISE, tmp); 240 /* Restart auto negotiation */ 241 bmcr = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_BMCR); 242 bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART); 243 amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_BMCR, bmcr); 244 245 } 246 247 /* 248 This function will unmap skb->data space and will free 249 all transmit and receive skbuffs. 250 */ 251 static int amd8111e_free_skbs(struct net_device *dev) 252 { 253 struct amd8111e_priv *lp = netdev_priv(dev); 254 struct sk_buff* rx_skbuff; 255 int i; 256 257 /* Freeing transmit skbs */ 258 for(i = 0; i < NUM_TX_BUFFERS; i++){ 259 if(lp->tx_skbuff[i]){ 260 pci_unmap_single(lp->pci_dev,lp->tx_dma_addr[i], lp->tx_skbuff[i]->len,PCI_DMA_TODEVICE); 261 dev_kfree_skb (lp->tx_skbuff[i]); 262 lp->tx_skbuff[i] = NULL; 263 lp->tx_dma_addr[i] = 0; 264 } 265 } 266 /* Freeing previously allocated receive buffers */ 267 for (i = 0; i < NUM_RX_BUFFERS; i++){ 268 rx_skbuff = lp->rx_skbuff[i]; 269 if(rx_skbuff != NULL){ 270 pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[i], 271 lp->rx_buff_len - 2,PCI_DMA_FROMDEVICE); 272 dev_kfree_skb(lp->rx_skbuff[i]); 273 lp->rx_skbuff[i] = NULL; 274 lp->rx_dma_addr[i] = 0; 275 } 276 } 277 278 return 0; 279 } 280 281 /* 282 This will set the receive buffer length corresponding to the mtu size of networkinterface. 283 */ 284 static inline void amd8111e_set_rx_buff_len(struct net_device* dev) 285 { 286 struct amd8111e_priv* lp = netdev_priv(dev); 287 unsigned int mtu = dev->mtu; 288 289 if (mtu > ETH_DATA_LEN){ 290 /* MTU + ethernet header + FCS 291 + optional VLAN tag + skb reserve space 2 */ 292 293 lp->rx_buff_len = mtu + ETH_HLEN + 10; 294 lp->options |= OPTION_JUMBO_ENABLE; 295 } else{ 296 lp->rx_buff_len = PKT_BUFF_SZ; 297 lp->options &= ~OPTION_JUMBO_ENABLE; 298 } 299 } 300 301 /* 302 This function will free all the previously allocated buffers, determine new receive buffer length and will allocate new receive buffers. This function also allocates and initializes both the transmitter and receive hardware descriptors. 303 */ 304 static int amd8111e_init_ring(struct net_device *dev) 305 { 306 struct amd8111e_priv *lp = netdev_priv(dev); 307 int i; 308 309 lp->rx_idx = lp->tx_idx = 0; 310 lp->tx_complete_idx = 0; 311 lp->tx_ring_idx = 0; 312 313 314 if(lp->opened) 315 /* Free previously allocated transmit and receive skbs */ 316 amd8111e_free_skbs(dev); 317 318 else{ 319 /* allocate the tx and rx descriptors */ 320 if((lp->tx_ring = pci_alloc_consistent(lp->pci_dev, 321 sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR, 322 &lp->tx_ring_dma_addr)) == NULL) 323 324 goto err_no_mem; 325 326 if((lp->rx_ring = pci_alloc_consistent(lp->pci_dev, 327 sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR, 328 &lp->rx_ring_dma_addr)) == NULL) 329 330 goto err_free_tx_ring; 331 332 } 333 /* Set new receive buff size */ 334 amd8111e_set_rx_buff_len(dev); 335 336 /* Allocating receive skbs */ 337 for (i = 0; i < NUM_RX_BUFFERS; i++) { 338 339 if (!(lp->rx_skbuff[i] = dev_alloc_skb(lp->rx_buff_len))) { 340 /* Release previos allocated skbs */ 341 for(--i; i >= 0 ;i--) 342 dev_kfree_skb(lp->rx_skbuff[i]); 343 goto err_free_rx_ring; 344 } 345 skb_reserve(lp->rx_skbuff[i],2); 346 } 347 /* Initilaizing receive descriptors */ 348 for (i = 0; i < NUM_RX_BUFFERS; i++) { 349 lp->rx_dma_addr[i] = pci_map_single(lp->pci_dev, 350 lp->rx_skbuff[i]->data,lp->rx_buff_len-2, PCI_DMA_FROMDEVICE); 351 352 lp->rx_ring[i].buff_phy_addr = cpu_to_le32(lp->rx_dma_addr[i]); 353 lp->rx_ring[i].buff_count = cpu_to_le16(lp->rx_buff_len-2); 354 wmb(); 355 lp->rx_ring[i].rx_flags = cpu_to_le16(OWN_BIT); 356 } 357 358 /* Initializing transmit descriptors */ 359 for (i = 0; i < NUM_TX_RING_DR; i++) { 360 lp->tx_ring[i].buff_phy_addr = 0; 361 lp->tx_ring[i].tx_flags = 0; 362 lp->tx_ring[i].buff_count = 0; 363 } 364 365 return 0; 366 367 err_free_rx_ring: 368 369 pci_free_consistent(lp->pci_dev, 370 sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,lp->rx_ring, 371 lp->rx_ring_dma_addr); 372 373 err_free_tx_ring: 374 375 pci_free_consistent(lp->pci_dev, 376 sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,lp->tx_ring, 377 lp->tx_ring_dma_addr); 378 379 err_no_mem: 380 return -ENOMEM; 381 } 382 /* This function will set the interrupt coalescing according to the input arguments */ 383 static int amd8111e_set_coalesce(struct net_device * dev, enum coal_mode cmod) 384 { 385 unsigned int timeout; 386 unsigned int event_count; 387 388 struct amd8111e_priv *lp = netdev_priv(dev); 389 void __iomem *mmio = lp->mmio; 390 struct amd8111e_coalesce_conf * coal_conf = &lp->coal_conf; 391 392 393 switch(cmod) 394 { 395 case RX_INTR_COAL : 396 timeout = coal_conf->rx_timeout; 397 event_count = coal_conf->rx_event_count; 398 if( timeout > MAX_TIMEOUT || 399 event_count > MAX_EVENT_COUNT ) 400 return -EINVAL; 401 402 timeout = timeout * DELAY_TIMER_CONV; 403 writel(VAL0|STINTEN, mmio+INTEN0); 404 writel((u32)DLY_INT_A_R0|( event_count<< 16 )|timeout, 405 mmio+DLY_INT_A); 406 break; 407 408 case TX_INTR_COAL : 409 timeout = coal_conf->tx_timeout; 410 event_count = coal_conf->tx_event_count; 411 if( timeout > MAX_TIMEOUT || 412 event_count > MAX_EVENT_COUNT ) 413 return -EINVAL; 414 415 416 timeout = timeout * DELAY_TIMER_CONV; 417 writel(VAL0|STINTEN,mmio+INTEN0); 418 writel((u32)DLY_INT_B_T0|( event_count<< 16 )|timeout, 419 mmio+DLY_INT_B); 420 break; 421 422 case DISABLE_COAL: 423 writel(0,mmio+STVAL); 424 writel(STINTEN, mmio+INTEN0); 425 writel(0, mmio +DLY_INT_B); 426 writel(0, mmio+DLY_INT_A); 427 break; 428 case ENABLE_COAL: 429 /* Start the timer */ 430 writel((u32)SOFT_TIMER_FREQ, mmio+STVAL); /* 0.5 sec */ 431 writel(VAL0|STINTEN, mmio+INTEN0); 432 break; 433 default: 434 break; 435 436 } 437 return 0; 438 439 } 440 441 /* 442 This function initializes the device registers and starts the device. 443 */ 444 static int amd8111e_restart(struct net_device *dev) 445 { 446 struct amd8111e_priv *lp = netdev_priv(dev); 447 void __iomem *mmio = lp->mmio; 448 int i,reg_val; 449 450 /* stop the chip */ 451 writel(RUN, mmio + CMD0); 452 453 if(amd8111e_init_ring(dev)) 454 return -ENOMEM; 455 456 /* enable the port manager and set auto negotiation always */ 457 writel((u32) VAL1|EN_PMGR, mmio + CMD3 ); 458 writel((u32)XPHYANE|XPHYRST , mmio + CTRL2); 459 460 amd8111e_set_ext_phy(dev); 461 462 /* set control registers */ 463 reg_val = readl(mmio + CTRL1); 464 reg_val &= ~XMTSP_MASK; 465 writel( reg_val| XMTSP_128 | CACHE_ALIGN, mmio + CTRL1 ); 466 467 /* enable interrupt */ 468 writel( APINT5EN | APINT4EN | APINT3EN | APINT2EN | APINT1EN | 469 APINT0EN | MIIPDTINTEN | MCCIINTEN | MCCINTEN | MREINTEN | 470 SPNDINTEN | MPINTEN | SINTEN | STINTEN, mmio + INTEN0); 471 472 writel(VAL3 | LCINTEN | VAL1 | TINTEN0 | VAL0 | RINTEN0, mmio + INTEN0); 473 474 /* initialize tx and rx ring base addresses */ 475 writel((u32)lp->tx_ring_dma_addr,mmio + XMT_RING_BASE_ADDR0); 476 writel((u32)lp->rx_ring_dma_addr,mmio+ RCV_RING_BASE_ADDR0); 477 478 writew((u32)NUM_TX_RING_DR, mmio + XMT_RING_LEN0); 479 writew((u16)NUM_RX_RING_DR, mmio + RCV_RING_LEN0); 480 481 /* set default IPG to 96 */ 482 writew((u32)DEFAULT_IPG,mmio+IPG); 483 writew((u32)(DEFAULT_IPG-IFS1_DELTA), mmio + IFS1); 484 485 if(lp->options & OPTION_JUMBO_ENABLE){ 486 writel((u32)VAL2|JUMBO, mmio + CMD3); 487 /* Reset REX_UFLO */ 488 writel( REX_UFLO, mmio + CMD2); 489 /* Should not set REX_UFLO for jumbo frames */ 490 writel( VAL0 | APAD_XMT|REX_RTRY , mmio + CMD2); 491 }else{ 492 writel( VAL0 | APAD_XMT | REX_RTRY|REX_UFLO, mmio + CMD2); 493 writel((u32)JUMBO, mmio + CMD3); 494 } 495 496 #if AMD8111E_VLAN_TAG_USED 497 writel((u32) VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3); 498 #endif 499 writel( VAL0 | APAD_XMT | REX_RTRY, mmio + CMD2 ); 500 501 /* Setting the MAC address to the device */ 502 for (i = 0; i < ETH_ALEN; i++) 503 writeb( dev->dev_addr[i], mmio + PADR + i ); 504 505 /* Enable interrupt coalesce */ 506 if(lp->options & OPTION_INTR_COAL_ENABLE){ 507 printk(KERN_INFO "%s: Interrupt Coalescing Enabled.\n", 508 dev->name); 509 amd8111e_set_coalesce(dev,ENABLE_COAL); 510 } 511 512 /* set RUN bit to start the chip */ 513 writel(VAL2 | RDMD0, mmio + CMD0); 514 writel(VAL0 | INTREN | RUN, mmio + CMD0); 515 516 /* To avoid PCI posting bug */ 517 readl(mmio+CMD0); 518 return 0; 519 } 520 /* 521 This function clears necessary the device registers. 522 */ 523 static void amd8111e_init_hw_default( struct amd8111e_priv* lp) 524 { 525 unsigned int reg_val; 526 unsigned int logic_filter[2] ={0,}; 527 void __iomem *mmio = lp->mmio; 528 529 530 /* stop the chip */ 531 writel(RUN, mmio + CMD0); 532 533 /* AUTOPOLL0 Register *//*TBD default value is 8100 in FPS */ 534 writew( 0x8100 | lp->ext_phy_addr, mmio + AUTOPOLL0); 535 536 /* Clear RCV_RING_BASE_ADDR */ 537 writel(0, mmio + RCV_RING_BASE_ADDR0); 538 539 /* Clear XMT_RING_BASE_ADDR */ 540 writel(0, mmio + XMT_RING_BASE_ADDR0); 541 writel(0, mmio + XMT_RING_BASE_ADDR1); 542 writel(0, mmio + XMT_RING_BASE_ADDR2); 543 writel(0, mmio + XMT_RING_BASE_ADDR3); 544 545 /* Clear CMD0 */ 546 writel(CMD0_CLEAR,mmio + CMD0); 547 548 /* Clear CMD2 */ 549 writel(CMD2_CLEAR, mmio +CMD2); 550 551 /* Clear CMD7 */ 552 writel(CMD7_CLEAR , mmio + CMD7); 553 554 /* Clear DLY_INT_A and DLY_INT_B */ 555 writel(0x0, mmio + DLY_INT_A); 556 writel(0x0, mmio + DLY_INT_B); 557 558 /* Clear FLOW_CONTROL */ 559 writel(0x0, mmio + FLOW_CONTROL); 560 561 /* Clear INT0 write 1 to clear register */ 562 reg_val = readl(mmio + INT0); 563 writel(reg_val, mmio + INT0); 564 565 /* Clear STVAL */ 566 writel(0x0, mmio + STVAL); 567 568 /* Clear INTEN0 */ 569 writel( INTEN0_CLEAR, mmio + INTEN0); 570 571 /* Clear LADRF */ 572 writel(0x0 , mmio + LADRF); 573 574 /* Set SRAM_SIZE & SRAM_BOUNDARY registers */ 575 writel( 0x80010,mmio + SRAM_SIZE); 576 577 /* Clear RCV_RING0_LEN */ 578 writel(0x0, mmio + RCV_RING_LEN0); 579 580 /* Clear XMT_RING0/1/2/3_LEN */ 581 writel(0x0, mmio + XMT_RING_LEN0); 582 writel(0x0, mmio + XMT_RING_LEN1); 583 writel(0x0, mmio + XMT_RING_LEN2); 584 writel(0x0, mmio + XMT_RING_LEN3); 585 586 /* Clear XMT_RING_LIMIT */ 587 writel(0x0, mmio + XMT_RING_LIMIT); 588 589 /* Clear MIB */ 590 writew(MIB_CLEAR, mmio + MIB_ADDR); 591 592 /* Clear LARF */ 593 amd8111e_writeq(*(u64*)logic_filter,mmio+LADRF); 594 595 /* SRAM_SIZE register */ 596 reg_val = readl(mmio + SRAM_SIZE); 597 598 if(lp->options & OPTION_JUMBO_ENABLE) 599 writel( VAL2|JUMBO, mmio + CMD3); 600 #if AMD8111E_VLAN_TAG_USED 601 writel(VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3 ); 602 #endif 603 /* Set default value to CTRL1 Register */ 604 writel(CTRL1_DEFAULT, mmio + CTRL1); 605 606 /* To avoid PCI posting bug */ 607 readl(mmio + CMD2); 608 609 } 610 611 /* 612 This function disables the interrupt and clears all the pending 613 interrupts in INT0 614 */ 615 static void amd8111e_disable_interrupt(struct amd8111e_priv* lp) 616 { 617 u32 intr0; 618 619 /* Disable interrupt */ 620 writel(INTREN, lp->mmio + CMD0); 621 622 /* Clear INT0 */ 623 intr0 = readl(lp->mmio + INT0); 624 writel(intr0, lp->mmio + INT0); 625 626 /* To avoid PCI posting bug */ 627 readl(lp->mmio + INT0); 628 629 } 630 631 /* 632 This function stops the chip. 633 */ 634 static void amd8111e_stop_chip(struct amd8111e_priv* lp) 635 { 636 writel(RUN, lp->mmio + CMD0); 637 638 /* To avoid PCI posting bug */ 639 readl(lp->mmio + CMD0); 640 } 641 642 /* 643 This function frees the transmiter and receiver descriptor rings. 644 */ 645 static void amd8111e_free_ring(struct amd8111e_priv* lp) 646 { 647 /* Free transmit and receive descriptor rings */ 648 if(lp->rx_ring){ 649 pci_free_consistent(lp->pci_dev, 650 sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR, 651 lp->rx_ring, lp->rx_ring_dma_addr); 652 lp->rx_ring = NULL; 653 } 654 655 if(lp->tx_ring){ 656 pci_free_consistent(lp->pci_dev, 657 sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR, 658 lp->tx_ring, lp->tx_ring_dma_addr); 659 660 lp->tx_ring = NULL; 661 } 662 663 } 664 665 /* 666 This function will free all the transmit skbs that are actually transmitted by the device. It will check the ownership of the skb before freeing the skb. 667 */ 668 static int amd8111e_tx(struct net_device *dev) 669 { 670 struct amd8111e_priv* lp = netdev_priv(dev); 671 int tx_index = lp->tx_complete_idx & TX_RING_DR_MOD_MASK; 672 int status; 673 /* Complete all the transmit packet */ 674 while (lp->tx_complete_idx != lp->tx_idx){ 675 tx_index = lp->tx_complete_idx & TX_RING_DR_MOD_MASK; 676 status = le16_to_cpu(lp->tx_ring[tx_index].tx_flags); 677 678 if(status & OWN_BIT) 679 break; /* It still hasn't been Txed */ 680 681 lp->tx_ring[tx_index].buff_phy_addr = 0; 682 683 /* We must free the original skb */ 684 if (lp->tx_skbuff[tx_index]) { 685 pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[tx_index], 686 lp->tx_skbuff[tx_index]->len, 687 PCI_DMA_TODEVICE); 688 dev_kfree_skb_irq (lp->tx_skbuff[tx_index]); 689 lp->tx_skbuff[tx_index] = NULL; 690 lp->tx_dma_addr[tx_index] = 0; 691 } 692 lp->tx_complete_idx++; 693 /*COAL update tx coalescing parameters */ 694 lp->coal_conf.tx_packets++; 695 lp->coal_conf.tx_bytes += 696 le16_to_cpu(lp->tx_ring[tx_index].buff_count); 697 698 if (netif_queue_stopped(dev) && 699 lp->tx_complete_idx > lp->tx_idx - NUM_TX_BUFFERS +2){ 700 /* The ring is no longer full, clear tbusy. */ 701 /* lp->tx_full = 0; */ 702 netif_wake_queue (dev); 703 } 704 } 705 return 0; 706 } 707 708 /* This function handles the driver receive operation in polling mode */ 709 static int amd8111e_rx_poll(struct napi_struct *napi, int budget) 710 { 711 struct amd8111e_priv *lp = container_of(napi, struct amd8111e_priv, napi); 712 struct net_device *dev = lp->amd8111e_net_dev; 713 int rx_index = lp->rx_idx & RX_RING_DR_MOD_MASK; 714 void __iomem *mmio = lp->mmio; 715 struct sk_buff *skb,*new_skb; 716 int min_pkt_len, status; 717 unsigned int intr0; 718 int num_rx_pkt = 0; 719 short pkt_len; 720 #if AMD8111E_VLAN_TAG_USED 721 short vtag; 722 #endif 723 int rx_pkt_limit = budget; 724 unsigned long flags; 725 726 do{ 727 /* process receive packets until we use the quota*/ 728 /* If we own the next entry, it's a new packet. Send it up. */ 729 while(1) { 730 status = le16_to_cpu(lp->rx_ring[rx_index].rx_flags); 731 if (status & OWN_BIT) 732 break; 733 734 /* 735 * There is a tricky error noted by John Murphy, 736 * <murf@perftech.com> to Russ Nelson: Even with 737 * full-sized * buffers it's possible for a 738 * jabber packet to use two buffers, with only 739 * the last correctly noting the error. 740 */ 741 742 if(status & ERR_BIT) { 743 /* reseting flags */ 744 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS; 745 goto err_next_pkt; 746 } 747 /* check for STP and ENP */ 748 if(!((status & STP_BIT) && (status & ENP_BIT))){ 749 /* reseting flags */ 750 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS; 751 goto err_next_pkt; 752 } 753 pkt_len = le16_to_cpu(lp->rx_ring[rx_index].msg_count) - 4; 754 755 #if AMD8111E_VLAN_TAG_USED 756 vtag = status & TT_MASK; 757 /*MAC will strip vlan tag*/ 758 if (vtag != 0) 759 min_pkt_len =MIN_PKT_LEN - 4; 760 else 761 #endif 762 min_pkt_len =MIN_PKT_LEN; 763 764 if (pkt_len < min_pkt_len) { 765 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS; 766 lp->drv_rx_errors++; 767 goto err_next_pkt; 768 } 769 if(--rx_pkt_limit < 0) 770 goto rx_not_empty; 771 if(!(new_skb = dev_alloc_skb(lp->rx_buff_len))){ 772 /* if allocation fail, 773 ignore that pkt and go to next one */ 774 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS; 775 lp->drv_rx_errors++; 776 goto err_next_pkt; 777 } 778 779 skb_reserve(new_skb, 2); 780 skb = lp->rx_skbuff[rx_index]; 781 pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[rx_index], 782 lp->rx_buff_len-2, PCI_DMA_FROMDEVICE); 783 skb_put(skb, pkt_len); 784 lp->rx_skbuff[rx_index] = new_skb; 785 lp->rx_dma_addr[rx_index] = pci_map_single(lp->pci_dev, 786 new_skb->data, 787 lp->rx_buff_len-2, 788 PCI_DMA_FROMDEVICE); 789 790 skb->protocol = eth_type_trans(skb, dev); 791 792 #if AMD8111E_VLAN_TAG_USED 793 if (vtag == TT_VLAN_TAGGED){ 794 u16 vlan_tag = le16_to_cpu(lp->rx_ring[rx_index].tag_ctrl_info); 795 __vlan_hwaccel_put_tag(skb, vlan_tag); 796 } 797 #endif 798 netif_receive_skb(skb); 799 /*COAL update rx coalescing parameters*/ 800 lp->coal_conf.rx_packets++; 801 lp->coal_conf.rx_bytes += pkt_len; 802 num_rx_pkt++; 803 804 err_next_pkt: 805 lp->rx_ring[rx_index].buff_phy_addr 806 = cpu_to_le32(lp->rx_dma_addr[rx_index]); 807 lp->rx_ring[rx_index].buff_count = 808 cpu_to_le16(lp->rx_buff_len-2); 809 wmb(); 810 lp->rx_ring[rx_index].rx_flags |= cpu_to_le16(OWN_BIT); 811 rx_index = (++lp->rx_idx) & RX_RING_DR_MOD_MASK; 812 } 813 /* Check the interrupt status register for more packets in the 814 mean time. Process them since we have not used up our quota.*/ 815 816 intr0 = readl(mmio + INT0); 817 /*Ack receive packets */ 818 writel(intr0 & RINT0,mmio + INT0); 819 820 } while(intr0 & RINT0); 821 822 if (rx_pkt_limit > 0) { 823 /* Receive descriptor is empty now */ 824 spin_lock_irqsave(&lp->lock, flags); 825 __napi_complete(napi); 826 writel(VAL0|RINTEN0, mmio + INTEN0); 827 writel(VAL2 | RDMD0, mmio + CMD0); 828 spin_unlock_irqrestore(&lp->lock, flags); 829 } 830 831 rx_not_empty: 832 return num_rx_pkt; 833 } 834 835 /* 836 This function will indicate the link status to the kernel. 837 */ 838 static int amd8111e_link_change(struct net_device* dev) 839 { 840 struct amd8111e_priv *lp = netdev_priv(dev); 841 int status0,speed; 842 843 /* read the link change */ 844 status0 = readl(lp->mmio + STAT0); 845 846 if(status0 & LINK_STATS){ 847 if(status0 & AUTONEG_COMPLETE) 848 lp->link_config.autoneg = AUTONEG_ENABLE; 849 else 850 lp->link_config.autoneg = AUTONEG_DISABLE; 851 852 if(status0 & FULL_DPLX) 853 lp->link_config.duplex = DUPLEX_FULL; 854 else 855 lp->link_config.duplex = DUPLEX_HALF; 856 speed = (status0 & SPEED_MASK) >> 7; 857 if(speed == PHY_SPEED_10) 858 lp->link_config.speed = SPEED_10; 859 else if(speed == PHY_SPEED_100) 860 lp->link_config.speed = SPEED_100; 861 862 printk(KERN_INFO "%s: Link is Up. Speed is %s Mbps %s Duplex\n", dev->name, 863 (lp->link_config.speed == SPEED_100) ? "100": "10", 864 (lp->link_config.duplex == DUPLEX_FULL)? "Full": "Half"); 865 netif_carrier_on(dev); 866 } 867 else{ 868 lp->link_config.speed = SPEED_INVALID; 869 lp->link_config.duplex = DUPLEX_INVALID; 870 lp->link_config.autoneg = AUTONEG_INVALID; 871 printk(KERN_INFO "%s: Link is Down.\n",dev->name); 872 netif_carrier_off(dev); 873 } 874 875 return 0; 876 } 877 /* 878 This function reads the mib counters. 879 */ 880 static int amd8111e_read_mib(void __iomem *mmio, u8 MIB_COUNTER) 881 { 882 unsigned int status; 883 unsigned int data; 884 unsigned int repeat = REPEAT_CNT; 885 886 writew( MIB_RD_CMD | MIB_COUNTER, mmio + MIB_ADDR); 887 do { 888 status = readw(mmio + MIB_ADDR); 889 udelay(2); /* controller takes MAX 2 us to get mib data */ 890 } 891 while (--repeat && (status & MIB_CMD_ACTIVE)); 892 893 data = readl(mmio + MIB_DATA); 894 return data; 895 } 896 897 /* 898 * This function reads the mib registers and returns the hardware statistics. 899 * It updates previous internal driver statistics with new values. 900 */ 901 static struct net_device_stats *amd8111e_get_stats(struct net_device *dev) 902 { 903 struct amd8111e_priv *lp = netdev_priv(dev); 904 void __iomem *mmio = lp->mmio; 905 unsigned long flags; 906 struct net_device_stats *new_stats = &dev->stats; 907 908 if (!lp->opened) 909 return new_stats; 910 spin_lock_irqsave (&lp->lock, flags); 911 912 /* stats.rx_packets */ 913 new_stats->rx_packets = amd8111e_read_mib(mmio, rcv_broadcast_pkts)+ 914 amd8111e_read_mib(mmio, rcv_multicast_pkts)+ 915 amd8111e_read_mib(mmio, rcv_unicast_pkts); 916 917 /* stats.tx_packets */ 918 new_stats->tx_packets = amd8111e_read_mib(mmio, xmt_packets); 919 920 /*stats.rx_bytes */ 921 new_stats->rx_bytes = amd8111e_read_mib(mmio, rcv_octets); 922 923 /* stats.tx_bytes */ 924 new_stats->tx_bytes = amd8111e_read_mib(mmio, xmt_octets); 925 926 /* stats.rx_errors */ 927 /* hw errors + errors driver reported */ 928 new_stats->rx_errors = amd8111e_read_mib(mmio, rcv_undersize_pkts)+ 929 amd8111e_read_mib(mmio, rcv_fragments)+ 930 amd8111e_read_mib(mmio, rcv_jabbers)+ 931 amd8111e_read_mib(mmio, rcv_alignment_errors)+ 932 amd8111e_read_mib(mmio, rcv_fcs_errors)+ 933 amd8111e_read_mib(mmio, rcv_miss_pkts)+ 934 lp->drv_rx_errors; 935 936 /* stats.tx_errors */ 937 new_stats->tx_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts); 938 939 /* stats.rx_dropped*/ 940 new_stats->rx_dropped = amd8111e_read_mib(mmio, rcv_miss_pkts); 941 942 /* stats.tx_dropped*/ 943 new_stats->tx_dropped = amd8111e_read_mib(mmio, xmt_underrun_pkts); 944 945 /* stats.multicast*/ 946 new_stats->multicast = amd8111e_read_mib(mmio, rcv_multicast_pkts); 947 948 /* stats.collisions*/ 949 new_stats->collisions = amd8111e_read_mib(mmio, xmt_collisions); 950 951 /* stats.rx_length_errors*/ 952 new_stats->rx_length_errors = 953 amd8111e_read_mib(mmio, rcv_undersize_pkts)+ 954 amd8111e_read_mib(mmio, rcv_oversize_pkts); 955 956 /* stats.rx_over_errors*/ 957 new_stats->rx_over_errors = amd8111e_read_mib(mmio, rcv_miss_pkts); 958 959 /* stats.rx_crc_errors*/ 960 new_stats->rx_crc_errors = amd8111e_read_mib(mmio, rcv_fcs_errors); 961 962 /* stats.rx_frame_errors*/ 963 new_stats->rx_frame_errors = 964 amd8111e_read_mib(mmio, rcv_alignment_errors); 965 966 /* stats.rx_fifo_errors */ 967 new_stats->rx_fifo_errors = amd8111e_read_mib(mmio, rcv_miss_pkts); 968 969 /* stats.rx_missed_errors */ 970 new_stats->rx_missed_errors = amd8111e_read_mib(mmio, rcv_miss_pkts); 971 972 /* stats.tx_aborted_errors*/ 973 new_stats->tx_aborted_errors = 974 amd8111e_read_mib(mmio, xmt_excessive_collision); 975 976 /* stats.tx_carrier_errors*/ 977 new_stats->tx_carrier_errors = 978 amd8111e_read_mib(mmio, xmt_loss_carrier); 979 980 /* stats.tx_fifo_errors*/ 981 new_stats->tx_fifo_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts); 982 983 /* stats.tx_window_errors*/ 984 new_stats->tx_window_errors = 985 amd8111e_read_mib(mmio, xmt_late_collision); 986 987 /* Reset the mibs for collecting new statistics */ 988 /* writew(MIB_CLEAR, mmio + MIB_ADDR);*/ 989 990 spin_unlock_irqrestore (&lp->lock, flags); 991 992 return new_stats; 993 } 994 /* This function recalculate the interrupt coalescing mode on every interrupt 995 according to the datarate and the packet rate. 996 */ 997 static int amd8111e_calc_coalesce(struct net_device *dev) 998 { 999 struct amd8111e_priv *lp = netdev_priv(dev); 1000 struct amd8111e_coalesce_conf * coal_conf = &lp->coal_conf; 1001 int tx_pkt_rate; 1002 int rx_pkt_rate; 1003 int tx_data_rate; 1004 int rx_data_rate; 1005 int rx_pkt_size; 1006 int tx_pkt_size; 1007 1008 tx_pkt_rate = coal_conf->tx_packets - coal_conf->tx_prev_packets; 1009 coal_conf->tx_prev_packets = coal_conf->tx_packets; 1010 1011 tx_data_rate = coal_conf->tx_bytes - coal_conf->tx_prev_bytes; 1012 coal_conf->tx_prev_bytes = coal_conf->tx_bytes; 1013 1014 rx_pkt_rate = coal_conf->rx_packets - coal_conf->rx_prev_packets; 1015 coal_conf->rx_prev_packets = coal_conf->rx_packets; 1016 1017 rx_data_rate = coal_conf->rx_bytes - coal_conf->rx_prev_bytes; 1018 coal_conf->rx_prev_bytes = coal_conf->rx_bytes; 1019 1020 if(rx_pkt_rate < 800){ 1021 if(coal_conf->rx_coal_type != NO_COALESCE){ 1022 1023 coal_conf->rx_timeout = 0x0; 1024 coal_conf->rx_event_count = 0; 1025 amd8111e_set_coalesce(dev,RX_INTR_COAL); 1026 coal_conf->rx_coal_type = NO_COALESCE; 1027 } 1028 } 1029 else{ 1030 1031 rx_pkt_size = rx_data_rate/rx_pkt_rate; 1032 if (rx_pkt_size < 128){ 1033 if(coal_conf->rx_coal_type != NO_COALESCE){ 1034 1035 coal_conf->rx_timeout = 0; 1036 coal_conf->rx_event_count = 0; 1037 amd8111e_set_coalesce(dev,RX_INTR_COAL); 1038 coal_conf->rx_coal_type = NO_COALESCE; 1039 } 1040 1041 } 1042 else if ( (rx_pkt_size >= 128) && (rx_pkt_size < 512) ){ 1043 1044 if(coal_conf->rx_coal_type != LOW_COALESCE){ 1045 coal_conf->rx_timeout = 1; 1046 coal_conf->rx_event_count = 4; 1047 amd8111e_set_coalesce(dev,RX_INTR_COAL); 1048 coal_conf->rx_coal_type = LOW_COALESCE; 1049 } 1050 } 1051 else if ((rx_pkt_size >= 512) && (rx_pkt_size < 1024)){ 1052 1053 if(coal_conf->rx_coal_type != MEDIUM_COALESCE){ 1054 coal_conf->rx_timeout = 1; 1055 coal_conf->rx_event_count = 4; 1056 amd8111e_set_coalesce(dev,RX_INTR_COAL); 1057 coal_conf->rx_coal_type = MEDIUM_COALESCE; 1058 } 1059 1060 } 1061 else if(rx_pkt_size >= 1024){ 1062 if(coal_conf->rx_coal_type != HIGH_COALESCE){ 1063 coal_conf->rx_timeout = 2; 1064 coal_conf->rx_event_count = 3; 1065 amd8111e_set_coalesce(dev,RX_INTR_COAL); 1066 coal_conf->rx_coal_type = HIGH_COALESCE; 1067 } 1068 } 1069 } 1070 /* NOW FOR TX INTR COALESC */ 1071 if(tx_pkt_rate < 800){ 1072 if(coal_conf->tx_coal_type != NO_COALESCE){ 1073 1074 coal_conf->tx_timeout = 0x0; 1075 coal_conf->tx_event_count = 0; 1076 amd8111e_set_coalesce(dev,TX_INTR_COAL); 1077 coal_conf->tx_coal_type = NO_COALESCE; 1078 } 1079 } 1080 else{ 1081 1082 tx_pkt_size = tx_data_rate/tx_pkt_rate; 1083 if (tx_pkt_size < 128){ 1084 1085 if(coal_conf->tx_coal_type != NO_COALESCE){ 1086 1087 coal_conf->tx_timeout = 0; 1088 coal_conf->tx_event_count = 0; 1089 amd8111e_set_coalesce(dev,TX_INTR_COAL); 1090 coal_conf->tx_coal_type = NO_COALESCE; 1091 } 1092 1093 } 1094 else if ( (tx_pkt_size >= 128) && (tx_pkt_size < 512) ){ 1095 1096 if(coal_conf->tx_coal_type != LOW_COALESCE){ 1097 coal_conf->tx_timeout = 1; 1098 coal_conf->tx_event_count = 2; 1099 amd8111e_set_coalesce(dev,TX_INTR_COAL); 1100 coal_conf->tx_coal_type = LOW_COALESCE; 1101 1102 } 1103 } 1104 else if ((tx_pkt_size >= 512) && (tx_pkt_size < 1024)){ 1105 1106 if(coal_conf->tx_coal_type != MEDIUM_COALESCE){ 1107 coal_conf->tx_timeout = 2; 1108 coal_conf->tx_event_count = 5; 1109 amd8111e_set_coalesce(dev,TX_INTR_COAL); 1110 coal_conf->tx_coal_type = MEDIUM_COALESCE; 1111 } 1112 1113 } 1114 else if(tx_pkt_size >= 1024){ 1115 if (tx_pkt_size >= 1024){ 1116 if(coal_conf->tx_coal_type != HIGH_COALESCE){ 1117 coal_conf->tx_timeout = 4; 1118 coal_conf->tx_event_count = 8; 1119 amd8111e_set_coalesce(dev,TX_INTR_COAL); 1120 coal_conf->tx_coal_type = HIGH_COALESCE; 1121 } 1122 } 1123 } 1124 } 1125 return 0; 1126 1127 } 1128 /* 1129 This is device interrupt function. It handles transmit, receive,link change and hardware timer interrupts. 1130 */ 1131 static irqreturn_t amd8111e_interrupt(int irq, void *dev_id) 1132 { 1133 1134 struct net_device * dev = (struct net_device *) dev_id; 1135 struct amd8111e_priv *lp = netdev_priv(dev); 1136 void __iomem *mmio = lp->mmio; 1137 unsigned int intr0, intren0; 1138 unsigned int handled = 1; 1139 1140 if(unlikely(dev == NULL)) 1141 return IRQ_NONE; 1142 1143 spin_lock(&lp->lock); 1144 1145 /* disabling interrupt */ 1146 writel(INTREN, mmio + CMD0); 1147 1148 /* Read interrupt status */ 1149 intr0 = readl(mmio + INT0); 1150 intren0 = readl(mmio + INTEN0); 1151 1152 /* Process all the INT event until INTR bit is clear. */ 1153 1154 if (!(intr0 & INTR)){ 1155 handled = 0; 1156 goto err_no_interrupt; 1157 } 1158 1159 /* Current driver processes 4 interrupts : RINT,TINT,LCINT,STINT */ 1160 writel(intr0, mmio + INT0); 1161 1162 /* Check if Receive Interrupt has occurred. */ 1163 if (intr0 & RINT0) { 1164 if (napi_schedule_prep(&lp->napi)) { 1165 /* Disable receive interupts */ 1166 writel(RINTEN0, mmio + INTEN0); 1167 /* Schedule a polling routine */ 1168 __napi_schedule(&lp->napi); 1169 } else if (intren0 & RINTEN0) { 1170 printk("************Driver bug! interrupt while in poll\n"); 1171 /* Fix by disable receive interrupts */ 1172 writel(RINTEN0, mmio + INTEN0); 1173 } 1174 } 1175 1176 /* Check if Transmit Interrupt has occurred. */ 1177 if (intr0 & TINT0) 1178 amd8111e_tx(dev); 1179 1180 /* Check if Link Change Interrupt has occurred. */ 1181 if (intr0 & LCINT) 1182 amd8111e_link_change(dev); 1183 1184 /* Check if Hardware Timer Interrupt has occurred. */ 1185 if (intr0 & STINT) 1186 amd8111e_calc_coalesce(dev); 1187 1188 err_no_interrupt: 1189 writel( VAL0 | INTREN,mmio + CMD0); 1190 1191 spin_unlock(&lp->lock); 1192 1193 return IRQ_RETVAL(handled); 1194 } 1195 1196 #ifdef CONFIG_NET_POLL_CONTROLLER 1197 static void amd8111e_poll(struct net_device *dev) 1198 { 1199 unsigned long flags; 1200 local_irq_save(flags); 1201 amd8111e_interrupt(0, dev); 1202 local_irq_restore(flags); 1203 } 1204 #endif 1205 1206 1207 /* 1208 This function closes the network interface and updates the statistics so that most recent statistics will be available after the interface is down. 1209 */ 1210 static int amd8111e_close(struct net_device * dev) 1211 { 1212 struct amd8111e_priv *lp = netdev_priv(dev); 1213 netif_stop_queue(dev); 1214 1215 napi_disable(&lp->napi); 1216 1217 spin_lock_irq(&lp->lock); 1218 1219 amd8111e_disable_interrupt(lp); 1220 amd8111e_stop_chip(lp); 1221 1222 /* Free transmit and receive skbs */ 1223 amd8111e_free_skbs(lp->amd8111e_net_dev); 1224 1225 netif_carrier_off(lp->amd8111e_net_dev); 1226 1227 /* Delete ipg timer */ 1228 if(lp->options & OPTION_DYN_IPG_ENABLE) 1229 del_timer_sync(&lp->ipg_data.ipg_timer); 1230 1231 spin_unlock_irq(&lp->lock); 1232 free_irq(dev->irq, dev); 1233 amd8111e_free_ring(lp); 1234 1235 /* Update the statistics before closing */ 1236 amd8111e_get_stats(dev); 1237 lp->opened = 0; 1238 return 0; 1239 } 1240 /* This function opens new interface.It requests irq for the device, initializes the device,buffers and descriptors, and starts the device. 1241 */ 1242 static int amd8111e_open(struct net_device * dev ) 1243 { 1244 struct amd8111e_priv *lp = netdev_priv(dev); 1245 1246 if(dev->irq ==0 || request_irq(dev->irq, amd8111e_interrupt, IRQF_SHARED, 1247 dev->name, dev)) 1248 return -EAGAIN; 1249 1250 napi_enable(&lp->napi); 1251 1252 spin_lock_irq(&lp->lock); 1253 1254 amd8111e_init_hw_default(lp); 1255 1256 if(amd8111e_restart(dev)){ 1257 spin_unlock_irq(&lp->lock); 1258 napi_disable(&lp->napi); 1259 if (dev->irq) 1260 free_irq(dev->irq, dev); 1261 return -ENOMEM; 1262 } 1263 /* Start ipg timer */ 1264 if(lp->options & OPTION_DYN_IPG_ENABLE){ 1265 add_timer(&lp->ipg_data.ipg_timer); 1266 printk(KERN_INFO "%s: Dynamic IPG Enabled.\n",dev->name); 1267 } 1268 1269 lp->opened = 1; 1270 1271 spin_unlock_irq(&lp->lock); 1272 1273 netif_start_queue(dev); 1274 1275 return 0; 1276 } 1277 /* 1278 This function checks if there is any transmit descriptors available to queue more packet. 1279 */ 1280 static int amd8111e_tx_queue_avail(struct amd8111e_priv* lp ) 1281 { 1282 int tx_index = lp->tx_idx & TX_BUFF_MOD_MASK; 1283 if (lp->tx_skbuff[tx_index]) 1284 return -1; 1285 else 1286 return 0; 1287 1288 } 1289 /* 1290 This function will queue the transmit packets to the descriptors and will trigger the send operation. It also initializes the transmit descriptors with buffer physical address, byte count, ownership to hardware etc. 1291 */ 1292 1293 static netdev_tx_t amd8111e_start_xmit(struct sk_buff *skb, 1294 struct net_device * dev) 1295 { 1296 struct amd8111e_priv *lp = netdev_priv(dev); 1297 int tx_index; 1298 unsigned long flags; 1299 1300 spin_lock_irqsave(&lp->lock, flags); 1301 1302 tx_index = lp->tx_idx & TX_RING_DR_MOD_MASK; 1303 1304 lp->tx_ring[tx_index].buff_count = cpu_to_le16(skb->len); 1305 1306 lp->tx_skbuff[tx_index] = skb; 1307 lp->tx_ring[tx_index].tx_flags = 0; 1308 1309 #if AMD8111E_VLAN_TAG_USED 1310 if (vlan_tx_tag_present(skb)) { 1311 lp->tx_ring[tx_index].tag_ctrl_cmd |= 1312 cpu_to_le16(TCC_VLAN_INSERT); 1313 lp->tx_ring[tx_index].tag_ctrl_info = 1314 cpu_to_le16(vlan_tx_tag_get(skb)); 1315 1316 } 1317 #endif 1318 lp->tx_dma_addr[tx_index] = 1319 pci_map_single(lp->pci_dev, skb->data, skb->len, PCI_DMA_TODEVICE); 1320 lp->tx_ring[tx_index].buff_phy_addr = 1321 cpu_to_le32(lp->tx_dma_addr[tx_index]); 1322 1323 /* Set FCS and LTINT bits */ 1324 wmb(); 1325 lp->tx_ring[tx_index].tx_flags |= 1326 cpu_to_le16(OWN_BIT | STP_BIT | ENP_BIT|ADD_FCS_BIT|LTINT_BIT); 1327 1328 lp->tx_idx++; 1329 1330 /* Trigger an immediate send poll. */ 1331 writel( VAL1 | TDMD0, lp->mmio + CMD0); 1332 writel( VAL2 | RDMD0,lp->mmio + CMD0); 1333 1334 if(amd8111e_tx_queue_avail(lp) < 0){ 1335 netif_stop_queue(dev); 1336 } 1337 spin_unlock_irqrestore(&lp->lock, flags); 1338 return NETDEV_TX_OK; 1339 } 1340 /* 1341 This function returns all the memory mapped registers of the device. 1342 */ 1343 static void amd8111e_read_regs(struct amd8111e_priv *lp, u32 *buf) 1344 { 1345 void __iomem *mmio = lp->mmio; 1346 /* Read only necessary registers */ 1347 buf[0] = readl(mmio + XMT_RING_BASE_ADDR0); 1348 buf[1] = readl(mmio + XMT_RING_LEN0); 1349 buf[2] = readl(mmio + RCV_RING_BASE_ADDR0); 1350 buf[3] = readl(mmio + RCV_RING_LEN0); 1351 buf[4] = readl(mmio + CMD0); 1352 buf[5] = readl(mmio + CMD2); 1353 buf[6] = readl(mmio + CMD3); 1354 buf[7] = readl(mmio + CMD7); 1355 buf[8] = readl(mmio + INT0); 1356 buf[9] = readl(mmio + INTEN0); 1357 buf[10] = readl(mmio + LADRF); 1358 buf[11] = readl(mmio + LADRF+4); 1359 buf[12] = readl(mmio + STAT0); 1360 } 1361 1362 1363 /* 1364 This function sets promiscuos mode, all-multi mode or the multicast address 1365 list to the device. 1366 */ 1367 static void amd8111e_set_multicast_list(struct net_device *dev) 1368 { 1369 struct netdev_hw_addr *ha; 1370 struct amd8111e_priv *lp = netdev_priv(dev); 1371 u32 mc_filter[2] ; 1372 int bit_num; 1373 1374 if(dev->flags & IFF_PROMISC){ 1375 writel( VAL2 | PROM, lp->mmio + CMD2); 1376 return; 1377 } 1378 else 1379 writel( PROM, lp->mmio + CMD2); 1380 if (dev->flags & IFF_ALLMULTI || 1381 netdev_mc_count(dev) > MAX_FILTER_SIZE) { 1382 /* get all multicast packet */ 1383 mc_filter[1] = mc_filter[0] = 0xffffffff; 1384 lp->options |= OPTION_MULTICAST_ENABLE; 1385 amd8111e_writeq(*(u64*)mc_filter,lp->mmio + LADRF); 1386 return; 1387 } 1388 if (netdev_mc_empty(dev)) { 1389 /* get only own packets */ 1390 mc_filter[1] = mc_filter[0] = 0; 1391 lp->options &= ~OPTION_MULTICAST_ENABLE; 1392 amd8111e_writeq(*(u64*)mc_filter,lp->mmio + LADRF); 1393 /* disable promiscuous mode */ 1394 writel(PROM, lp->mmio + CMD2); 1395 return; 1396 } 1397 /* load all the multicast addresses in the logic filter */ 1398 lp->options |= OPTION_MULTICAST_ENABLE; 1399 mc_filter[1] = mc_filter[0] = 0; 1400 netdev_for_each_mc_addr(ha, dev) { 1401 bit_num = (ether_crc_le(ETH_ALEN, ha->addr) >> 26) & 0x3f; 1402 mc_filter[bit_num >> 5] |= 1 << (bit_num & 31); 1403 } 1404 amd8111e_writeq(*(u64*)mc_filter,lp->mmio+ LADRF); 1405 1406 /* To eliminate PCI posting bug */ 1407 readl(lp->mmio + CMD2); 1408 1409 } 1410 1411 static void amd8111e_get_drvinfo(struct net_device* dev, struct ethtool_drvinfo *info) 1412 { 1413 struct amd8111e_priv *lp = netdev_priv(dev); 1414 struct pci_dev *pci_dev = lp->pci_dev; 1415 strlcpy(info->driver, MODULE_NAME, sizeof(info->driver)); 1416 strlcpy(info->version, MODULE_VERS, sizeof(info->version)); 1417 snprintf(info->fw_version, sizeof(info->fw_version), 1418 "%u", chip_version); 1419 strlcpy(info->bus_info, pci_name(pci_dev), sizeof(info->bus_info)); 1420 } 1421 1422 static int amd8111e_get_regs_len(struct net_device *dev) 1423 { 1424 return AMD8111E_REG_DUMP_LEN; 1425 } 1426 1427 static void amd8111e_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf) 1428 { 1429 struct amd8111e_priv *lp = netdev_priv(dev); 1430 regs->version = 0; 1431 amd8111e_read_regs(lp, buf); 1432 } 1433 1434 static int amd8111e_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) 1435 { 1436 struct amd8111e_priv *lp = netdev_priv(dev); 1437 spin_lock_irq(&lp->lock); 1438 mii_ethtool_gset(&lp->mii_if, ecmd); 1439 spin_unlock_irq(&lp->lock); 1440 return 0; 1441 } 1442 1443 static int amd8111e_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) 1444 { 1445 struct amd8111e_priv *lp = netdev_priv(dev); 1446 int res; 1447 spin_lock_irq(&lp->lock); 1448 res = mii_ethtool_sset(&lp->mii_if, ecmd); 1449 spin_unlock_irq(&lp->lock); 1450 return res; 1451 } 1452 1453 static int amd8111e_nway_reset(struct net_device *dev) 1454 { 1455 struct amd8111e_priv *lp = netdev_priv(dev); 1456 return mii_nway_restart(&lp->mii_if); 1457 } 1458 1459 static u32 amd8111e_get_link(struct net_device *dev) 1460 { 1461 struct amd8111e_priv *lp = netdev_priv(dev); 1462 return mii_link_ok(&lp->mii_if); 1463 } 1464 1465 static void amd8111e_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info) 1466 { 1467 struct amd8111e_priv *lp = netdev_priv(dev); 1468 wol_info->supported = WAKE_MAGIC|WAKE_PHY; 1469 if (lp->options & OPTION_WOL_ENABLE) 1470 wol_info->wolopts = WAKE_MAGIC; 1471 } 1472 1473 static int amd8111e_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info) 1474 { 1475 struct amd8111e_priv *lp = netdev_priv(dev); 1476 if (wol_info->wolopts & ~(WAKE_MAGIC|WAKE_PHY)) 1477 return -EINVAL; 1478 spin_lock_irq(&lp->lock); 1479 if (wol_info->wolopts & WAKE_MAGIC) 1480 lp->options |= 1481 (OPTION_WOL_ENABLE | OPTION_WAKE_MAGIC_ENABLE); 1482 else if(wol_info->wolopts & WAKE_PHY) 1483 lp->options |= 1484 (OPTION_WOL_ENABLE | OPTION_WAKE_PHY_ENABLE); 1485 else 1486 lp->options &= ~OPTION_WOL_ENABLE; 1487 spin_unlock_irq(&lp->lock); 1488 return 0; 1489 } 1490 1491 static const struct ethtool_ops ops = { 1492 .get_drvinfo = amd8111e_get_drvinfo, 1493 .get_regs_len = amd8111e_get_regs_len, 1494 .get_regs = amd8111e_get_regs, 1495 .get_settings = amd8111e_get_settings, 1496 .set_settings = amd8111e_set_settings, 1497 .nway_reset = amd8111e_nway_reset, 1498 .get_link = amd8111e_get_link, 1499 .get_wol = amd8111e_get_wol, 1500 .set_wol = amd8111e_set_wol, 1501 }; 1502 1503 /* 1504 This function handles all the ethtool ioctls. It gives driver info, gets/sets driver speed, gets memory mapped register values, forces auto negotiation, sets/gets WOL options for ethtool application. 1505 */ 1506 1507 static int amd8111e_ioctl(struct net_device * dev , struct ifreq *ifr, int cmd) 1508 { 1509 struct mii_ioctl_data *data = if_mii(ifr); 1510 struct amd8111e_priv *lp = netdev_priv(dev); 1511 int err; 1512 u32 mii_regval; 1513 1514 switch(cmd) { 1515 case SIOCGMIIPHY: 1516 data->phy_id = lp->ext_phy_addr; 1517 1518 /* fallthru */ 1519 case SIOCGMIIREG: 1520 1521 spin_lock_irq(&lp->lock); 1522 err = amd8111e_read_phy(lp, data->phy_id, 1523 data->reg_num & PHY_REG_ADDR_MASK, &mii_regval); 1524 spin_unlock_irq(&lp->lock); 1525 1526 data->val_out = mii_regval; 1527 return err; 1528 1529 case SIOCSMIIREG: 1530 1531 spin_lock_irq(&lp->lock); 1532 err = amd8111e_write_phy(lp, data->phy_id, 1533 data->reg_num & PHY_REG_ADDR_MASK, data->val_in); 1534 spin_unlock_irq(&lp->lock); 1535 1536 return err; 1537 1538 default: 1539 /* do nothing */ 1540 break; 1541 } 1542 return -EOPNOTSUPP; 1543 } 1544 static int amd8111e_set_mac_address(struct net_device *dev, void *p) 1545 { 1546 struct amd8111e_priv *lp = netdev_priv(dev); 1547 int i; 1548 struct sockaddr *addr = p; 1549 1550 memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); 1551 spin_lock_irq(&lp->lock); 1552 /* Setting the MAC address to the device */ 1553 for (i = 0; i < ETH_ALEN; i++) 1554 writeb( dev->dev_addr[i], lp->mmio + PADR + i ); 1555 1556 spin_unlock_irq(&lp->lock); 1557 1558 return 0; 1559 } 1560 1561 /* 1562 This function changes the mtu of the device. It restarts the device to initialize the descriptor with new receive buffers. 1563 */ 1564 static int amd8111e_change_mtu(struct net_device *dev, int new_mtu) 1565 { 1566 struct amd8111e_priv *lp = netdev_priv(dev); 1567 int err; 1568 1569 if ((new_mtu < AMD8111E_MIN_MTU) || (new_mtu > AMD8111E_MAX_MTU)) 1570 return -EINVAL; 1571 1572 if (!netif_running(dev)) { 1573 /* new_mtu will be used 1574 when device starts netxt time */ 1575 dev->mtu = new_mtu; 1576 return 0; 1577 } 1578 1579 spin_lock_irq(&lp->lock); 1580 1581 /* stop the chip */ 1582 writel(RUN, lp->mmio + CMD0); 1583 1584 dev->mtu = new_mtu; 1585 1586 err = amd8111e_restart(dev); 1587 spin_unlock_irq(&lp->lock); 1588 if(!err) 1589 netif_start_queue(dev); 1590 return err; 1591 } 1592 1593 static int amd8111e_enable_magicpkt(struct amd8111e_priv* lp) 1594 { 1595 writel( VAL1|MPPLBA, lp->mmio + CMD3); 1596 writel( VAL0|MPEN_SW, lp->mmio + CMD7); 1597 1598 /* To eliminate PCI posting bug */ 1599 readl(lp->mmio + CMD7); 1600 return 0; 1601 } 1602 1603 static int amd8111e_enable_link_change(struct amd8111e_priv* lp) 1604 { 1605 1606 /* Adapter is already stoped/suspended/interrupt-disabled */ 1607 writel(VAL0|LCMODE_SW,lp->mmio + CMD7); 1608 1609 /* To eliminate PCI posting bug */ 1610 readl(lp->mmio + CMD7); 1611 return 0; 1612 } 1613 1614 /* 1615 * This function is called when a packet transmission fails to complete 1616 * within a reasonable period, on the assumption that an interrupt have 1617 * failed or the interface is locked up. This function will reinitialize 1618 * the hardware. 1619 */ 1620 static void amd8111e_tx_timeout(struct net_device *dev) 1621 { 1622 struct amd8111e_priv* lp = netdev_priv(dev); 1623 int err; 1624 1625 printk(KERN_ERR "%s: transmit timed out, resetting\n", 1626 dev->name); 1627 spin_lock_irq(&lp->lock); 1628 err = amd8111e_restart(dev); 1629 spin_unlock_irq(&lp->lock); 1630 if(!err) 1631 netif_wake_queue(dev); 1632 } 1633 static int amd8111e_suspend(struct pci_dev *pci_dev, pm_message_t state) 1634 { 1635 struct net_device *dev = pci_get_drvdata(pci_dev); 1636 struct amd8111e_priv *lp = netdev_priv(dev); 1637 1638 if (!netif_running(dev)) 1639 return 0; 1640 1641 /* disable the interrupt */ 1642 spin_lock_irq(&lp->lock); 1643 amd8111e_disable_interrupt(lp); 1644 spin_unlock_irq(&lp->lock); 1645 1646 netif_device_detach(dev); 1647 1648 /* stop chip */ 1649 spin_lock_irq(&lp->lock); 1650 if(lp->options & OPTION_DYN_IPG_ENABLE) 1651 del_timer_sync(&lp->ipg_data.ipg_timer); 1652 amd8111e_stop_chip(lp); 1653 spin_unlock_irq(&lp->lock); 1654 1655 if(lp->options & OPTION_WOL_ENABLE){ 1656 /* enable wol */ 1657 if(lp->options & OPTION_WAKE_MAGIC_ENABLE) 1658 amd8111e_enable_magicpkt(lp); 1659 if(lp->options & OPTION_WAKE_PHY_ENABLE) 1660 amd8111e_enable_link_change(lp); 1661 1662 pci_enable_wake(pci_dev, PCI_D3hot, 1); 1663 pci_enable_wake(pci_dev, PCI_D3cold, 1); 1664 1665 } 1666 else{ 1667 pci_enable_wake(pci_dev, PCI_D3hot, 0); 1668 pci_enable_wake(pci_dev, PCI_D3cold, 0); 1669 } 1670 1671 pci_save_state(pci_dev); 1672 pci_set_power_state(pci_dev, PCI_D3hot); 1673 1674 return 0; 1675 } 1676 static int amd8111e_resume(struct pci_dev *pci_dev) 1677 { 1678 struct net_device *dev = pci_get_drvdata(pci_dev); 1679 struct amd8111e_priv *lp = netdev_priv(dev); 1680 1681 if (!netif_running(dev)) 1682 return 0; 1683 1684 pci_set_power_state(pci_dev, PCI_D0); 1685 pci_restore_state(pci_dev); 1686 1687 pci_enable_wake(pci_dev, PCI_D3hot, 0); 1688 pci_enable_wake(pci_dev, PCI_D3cold, 0); /* D3 cold */ 1689 1690 netif_device_attach(dev); 1691 1692 spin_lock_irq(&lp->lock); 1693 amd8111e_restart(dev); 1694 /* Restart ipg timer */ 1695 if(lp->options & OPTION_DYN_IPG_ENABLE) 1696 mod_timer(&lp->ipg_data.ipg_timer, 1697 jiffies + IPG_CONVERGE_JIFFIES); 1698 spin_unlock_irq(&lp->lock); 1699 1700 return 0; 1701 } 1702 1703 1704 static void __devexit amd8111e_remove_one(struct pci_dev *pdev) 1705 { 1706 struct net_device *dev = pci_get_drvdata(pdev); 1707 if (dev) { 1708 unregister_netdev(dev); 1709 iounmap(((struct amd8111e_priv *)netdev_priv(dev))->mmio); 1710 free_netdev(dev); 1711 pci_release_regions(pdev); 1712 pci_disable_device(pdev); 1713 pci_set_drvdata(pdev, NULL); 1714 } 1715 } 1716 static void amd8111e_config_ipg(struct net_device* dev) 1717 { 1718 struct amd8111e_priv *lp = netdev_priv(dev); 1719 struct ipg_info* ipg_data = &lp->ipg_data; 1720 void __iomem *mmio = lp->mmio; 1721 unsigned int prev_col_cnt = ipg_data->col_cnt; 1722 unsigned int total_col_cnt; 1723 unsigned int tmp_ipg; 1724 1725 if(lp->link_config.duplex == DUPLEX_FULL){ 1726 ipg_data->ipg = DEFAULT_IPG; 1727 return; 1728 } 1729 1730 if(ipg_data->ipg_state == SSTATE){ 1731 1732 if(ipg_data->timer_tick == IPG_STABLE_TIME){ 1733 1734 ipg_data->timer_tick = 0; 1735 ipg_data->ipg = MIN_IPG - IPG_STEP; 1736 ipg_data->current_ipg = MIN_IPG; 1737 ipg_data->diff_col_cnt = 0xFFFFFFFF; 1738 ipg_data->ipg_state = CSTATE; 1739 } 1740 else 1741 ipg_data->timer_tick++; 1742 } 1743 1744 if(ipg_data->ipg_state == CSTATE){ 1745 1746 /* Get the current collision count */ 1747 1748 total_col_cnt = ipg_data->col_cnt = 1749 amd8111e_read_mib(mmio, xmt_collisions); 1750 1751 if ((total_col_cnt - prev_col_cnt) < 1752 (ipg_data->diff_col_cnt)){ 1753 1754 ipg_data->diff_col_cnt = 1755 total_col_cnt - prev_col_cnt ; 1756 1757 ipg_data->ipg = ipg_data->current_ipg; 1758 } 1759 1760 ipg_data->current_ipg += IPG_STEP; 1761 1762 if (ipg_data->current_ipg <= MAX_IPG) 1763 tmp_ipg = ipg_data->current_ipg; 1764 else{ 1765 tmp_ipg = ipg_data->ipg; 1766 ipg_data->ipg_state = SSTATE; 1767 } 1768 writew((u32)tmp_ipg, mmio + IPG); 1769 writew((u32)(tmp_ipg - IFS1_DELTA), mmio + IFS1); 1770 } 1771 mod_timer(&lp->ipg_data.ipg_timer, jiffies + IPG_CONVERGE_JIFFIES); 1772 return; 1773 1774 } 1775 1776 static void __devinit amd8111e_probe_ext_phy(struct net_device* dev) 1777 { 1778 struct amd8111e_priv *lp = netdev_priv(dev); 1779 int i; 1780 1781 for (i = 0x1e; i >= 0; i--) { 1782 u32 id1, id2; 1783 1784 if (amd8111e_read_phy(lp, i, MII_PHYSID1, &id1)) 1785 continue; 1786 if (amd8111e_read_phy(lp, i, MII_PHYSID2, &id2)) 1787 continue; 1788 lp->ext_phy_id = (id1 << 16) | id2; 1789 lp->ext_phy_addr = i; 1790 return; 1791 } 1792 lp->ext_phy_id = 0; 1793 lp->ext_phy_addr = 1; 1794 } 1795 1796 static const struct net_device_ops amd8111e_netdev_ops = { 1797 .ndo_open = amd8111e_open, 1798 .ndo_stop = amd8111e_close, 1799 .ndo_start_xmit = amd8111e_start_xmit, 1800 .ndo_tx_timeout = amd8111e_tx_timeout, 1801 .ndo_get_stats = amd8111e_get_stats, 1802 .ndo_set_rx_mode = amd8111e_set_multicast_list, 1803 .ndo_validate_addr = eth_validate_addr, 1804 .ndo_set_mac_address = amd8111e_set_mac_address, 1805 .ndo_do_ioctl = amd8111e_ioctl, 1806 .ndo_change_mtu = amd8111e_change_mtu, 1807 #ifdef CONFIG_NET_POLL_CONTROLLER 1808 .ndo_poll_controller = amd8111e_poll, 1809 #endif 1810 }; 1811 1812 static int __devinit amd8111e_probe_one(struct pci_dev *pdev, 1813 const struct pci_device_id *ent) 1814 { 1815 int err,i,pm_cap; 1816 unsigned long reg_addr,reg_len; 1817 struct amd8111e_priv* lp; 1818 struct net_device* dev; 1819 1820 err = pci_enable_device(pdev); 1821 if(err){ 1822 printk(KERN_ERR "amd8111e: Cannot enable new PCI device, " 1823 "exiting.\n"); 1824 return err; 1825 } 1826 1827 if(!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)){ 1828 printk(KERN_ERR "amd8111e: Cannot find PCI base address, " 1829 "exiting.\n"); 1830 err = -ENODEV; 1831 goto err_disable_pdev; 1832 } 1833 1834 err = pci_request_regions(pdev, MODULE_NAME); 1835 if(err){ 1836 printk(KERN_ERR "amd8111e: Cannot obtain PCI resources, " 1837 "exiting.\n"); 1838 goto err_disable_pdev; 1839 } 1840 1841 pci_set_master(pdev); 1842 1843 /* Find power-management capability. */ 1844 if((pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM))==0){ 1845 printk(KERN_ERR "amd8111e: No Power Management capability, " 1846 "exiting.\n"); 1847 goto err_free_reg; 1848 } 1849 1850 /* Initialize DMA */ 1851 if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) < 0) { 1852 printk(KERN_ERR "amd8111e: DMA not supported," 1853 "exiting.\n"); 1854 goto err_free_reg; 1855 } 1856 1857 reg_addr = pci_resource_start(pdev, 0); 1858 reg_len = pci_resource_len(pdev, 0); 1859 1860 dev = alloc_etherdev(sizeof(struct amd8111e_priv)); 1861 if (!dev) { 1862 printk(KERN_ERR "amd8111e: Etherdev alloc failed, exiting.\n"); 1863 err = -ENOMEM; 1864 goto err_free_reg; 1865 } 1866 1867 SET_NETDEV_DEV(dev, &pdev->dev); 1868 1869 #if AMD8111E_VLAN_TAG_USED 1870 dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX ; 1871 #endif 1872 1873 lp = netdev_priv(dev); 1874 lp->pci_dev = pdev; 1875 lp->amd8111e_net_dev = dev; 1876 lp->pm_cap = pm_cap; 1877 1878 spin_lock_init(&lp->lock); 1879 1880 lp->mmio = ioremap(reg_addr, reg_len); 1881 if (!lp->mmio) { 1882 printk(KERN_ERR "amd8111e: Cannot map device registers, " 1883 "exiting\n"); 1884 err = -ENOMEM; 1885 goto err_free_dev; 1886 } 1887 1888 /* Initializing MAC address */ 1889 for (i = 0; i < ETH_ALEN; i++) 1890 dev->dev_addr[i] = readb(lp->mmio + PADR + i); 1891 1892 /* Setting user defined parametrs */ 1893 lp->ext_phy_option = speed_duplex[card_idx]; 1894 if(coalesce[card_idx]) 1895 lp->options |= OPTION_INTR_COAL_ENABLE; 1896 if(dynamic_ipg[card_idx++]) 1897 lp->options |= OPTION_DYN_IPG_ENABLE; 1898 1899 1900 /* Initialize driver entry points */ 1901 dev->netdev_ops = &amd8111e_netdev_ops; 1902 SET_ETHTOOL_OPS(dev, &ops); 1903 dev->irq =pdev->irq; 1904 dev->watchdog_timeo = AMD8111E_TX_TIMEOUT; 1905 netif_napi_add(dev, &lp->napi, amd8111e_rx_poll, 32); 1906 1907 #if AMD8111E_VLAN_TAG_USED 1908 dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; 1909 #endif 1910 /* Probe the external PHY */ 1911 amd8111e_probe_ext_phy(dev); 1912 1913 /* setting mii default values */ 1914 lp->mii_if.dev = dev; 1915 lp->mii_if.mdio_read = amd8111e_mdio_read; 1916 lp->mii_if.mdio_write = amd8111e_mdio_write; 1917 lp->mii_if.phy_id = lp->ext_phy_addr; 1918 1919 /* Set receive buffer length and set jumbo option*/ 1920 amd8111e_set_rx_buff_len(dev); 1921 1922 1923 err = register_netdev(dev); 1924 if (err) { 1925 printk(KERN_ERR "amd8111e: Cannot register net device, " 1926 "exiting.\n"); 1927 goto err_iounmap; 1928 } 1929 1930 pci_set_drvdata(pdev, dev); 1931 1932 /* Initialize software ipg timer */ 1933 if(lp->options & OPTION_DYN_IPG_ENABLE){ 1934 init_timer(&lp->ipg_data.ipg_timer); 1935 lp->ipg_data.ipg_timer.data = (unsigned long) dev; 1936 lp->ipg_data.ipg_timer.function = (void *)&amd8111e_config_ipg; 1937 lp->ipg_data.ipg_timer.expires = jiffies + 1938 IPG_CONVERGE_JIFFIES; 1939 lp->ipg_data.ipg = DEFAULT_IPG; 1940 lp->ipg_data.ipg_state = CSTATE; 1941 } 1942 1943 /* display driver and device information */ 1944 1945 chip_version = (readl(lp->mmio + CHIPID) & 0xf0000000)>>28; 1946 printk(KERN_INFO "%s: AMD-8111e Driver Version: %s\n", 1947 dev->name,MODULE_VERS); 1948 printk(KERN_INFO "%s: [ Rev %x ] PCI 10/100BaseT Ethernet %pM\n", 1949 dev->name, chip_version, dev->dev_addr); 1950 if (lp->ext_phy_id) 1951 printk(KERN_INFO "%s: Found MII PHY ID 0x%08x at address 0x%02x\n", 1952 dev->name, lp->ext_phy_id, lp->ext_phy_addr); 1953 else 1954 printk(KERN_INFO "%s: Couldn't detect MII PHY, assuming address 0x01\n", 1955 dev->name); 1956 return 0; 1957 err_iounmap: 1958 iounmap(lp->mmio); 1959 1960 err_free_dev: 1961 free_netdev(dev); 1962 1963 err_free_reg: 1964 pci_release_regions(pdev); 1965 1966 err_disable_pdev: 1967 pci_disable_device(pdev); 1968 pci_set_drvdata(pdev, NULL); 1969 return err; 1970 1971 } 1972 1973 static struct pci_driver amd8111e_driver = { 1974 .name = MODULE_NAME, 1975 .id_table = amd8111e_pci_tbl, 1976 .probe = amd8111e_probe_one, 1977 .remove = __devexit_p(amd8111e_remove_one), 1978 .suspend = amd8111e_suspend, 1979 .resume = amd8111e_resume 1980 }; 1981 1982 static int __init amd8111e_init(void) 1983 { 1984 return pci_register_driver(&amd8111e_driver); 1985 } 1986 1987 static void __exit amd8111e_cleanup(void) 1988 { 1989 pci_unregister_driver(&amd8111e_driver); 1990 } 1991 1992 module_init(amd8111e_init); 1993 module_exit(amd8111e_cleanup); 1994