xref: /openbmc/linux/drivers/net/ethernet/amd/Kconfig (revision ba61bb17)
1#
2# AMD network device configuration
3#
4
5config NET_VENDOR_AMD
6	bool "AMD devices"
7	default y
8	depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
9		   SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
10		   (ARM && ARCH_EBSA110) || ISA || EISA || PCMCIA || ARM64
11	---help---
12	  If you have a network (Ethernet) chipset belonging to this class,
13	  say Y.
14
15	  Note that the answer to this question does not directly affect
16	  the kernel: saying N will just case the configurator to skip all
17	  the questions regarding AMD chipsets. If you say Y, you will be asked
18	  for your specific chipset/driver in the following questions.
19
20if NET_VENDOR_AMD
21
22config A2065
23	tristate "A2065 support"
24	depends on ZORRO
25	select CRC32
26	---help---
27	  If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
28	  say N.
29
30	  To compile this driver as a module, choose M here: the module
31	  will be called a2065.
32
33config AMD8111_ETH
34	tristate "AMD 8111 (new PCI LANCE) support"
35	depends on PCI
36	select CRC32
37	select MII
38	---help---
39	  If you have an AMD 8111-based PCI LANCE ethernet card,
40	  answer Y here.
41
42	  To compile this driver as a module, choose M here. The module
43	  will be called amd8111e.
44
45config LANCE
46	tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
47	depends on ISA && ISA_DMA_API && !ARM
48	---help---
49	  If you have a network (Ethernet) card of this type, say Y here.
50	  Some LinkSys cards are of this type.
51
52	  To compile this driver as a module, choose M here: the module
53	  will be called lance.  This is recommended.
54
55config PCNET32
56	tristate "AMD PCnet32 PCI support"
57	depends on PCI
58	select CRC32
59	select MII
60	---help---
61	  If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
62	  answer Y here.
63
64	  To compile this driver as a module, choose M here. The module
65	  will be called pcnet32.
66
67config ARIADNE
68	tristate "Ariadne support"
69	depends on ZORRO
70	---help---
71	  If you have a Village Tronic Ariadne Ethernet adapter, say Y.
72	  Otherwise, say N.
73
74	  To compile this driver as a module, choose M here: the module
75	  will be called ariadne.
76
77config ARM_AM79C961A
78	bool "ARM EBSA110 AM79C961A support"
79	depends on ARM && ARCH_EBSA110
80	select CRC32
81	---help---
82	  If you wish to compile a kernel for the EBSA-110, then you should
83	  always answer Y to this.
84
85config ATARILANCE
86	tristate "Atari LANCE support"
87	depends on ATARI
88	---help---
89	  Say Y to include support for several Atari Ethernet adapters based
90	  on the AMD LANCE chipset: RieblCard (with or without battery), or
91	  PAMCard VME (also the version by Rhotron, with different addresses).
92
93config DECLANCE
94	tristate "DEC LANCE ethernet controller support"
95	depends on MACH_DECSTATION
96	select CRC32
97	---help---
98	  This driver is for the series of Ethernet controllers produced by
99	  DEC (now Compaq) based on the AMD LANCE chipset, including the
100	  DEPCA series.  (This chipset is better known via the NE2100 cards.)
101
102config HPLANCE
103	tristate "HP on-board LANCE support"
104	depends on DIO
105	select CRC32
106	---help---
107	  If you want to use the builtin "LANCE" Ethernet controller on an
108	  HP300 machine, say Y here.
109
110config MIPS_AU1X00_ENET
111	tristate "MIPS AU1000 Ethernet support"
112	depends on MIPS_ALCHEMY
113	select PHYLIB
114	select CRC32
115	---help---
116	  If you have an Alchemy Semi AU1X00 based system
117	  say Y.  Otherwise, say N.
118
119config MVME147_NET
120	tristate "MVME147 (LANCE) Ethernet support"
121	depends on MVME147
122	select CRC32
123	---help---
124	  Support for the on-board Ethernet interface on the Motorola MVME147
125	  single-board computer.  Say Y here to include the
126	  driver for this chip in your kernel.
127	  To compile this driver as a module, choose M here.
128
129config PCMCIA_NMCLAN
130	tristate "New Media PCMCIA support"
131	depends on PCMCIA
132	help
133	  Say Y here if you intend to attach a New Media Ethernet or LiveWire
134	  PCMCIA (PC-card) Ethernet card to your computer.
135
136	  To compile this driver as a module, choose M here: the module will be
137	  called nmclan_cs.  If unsure, say N.
138
139config NI65
140	tristate "NI6510 support"
141	depends on ISA && ISA_DMA_API && !ARM
142	---help---
143	  If you have a network (Ethernet) card of this type, say Y here.
144
145	  To compile this driver as a module, choose M here. The module
146	  will be called ni65.
147
148config SUN3LANCE
149	tristate "Sun3/Sun3x on-board LANCE support"
150	depends on (SUN3 || SUN3X)
151	---help---
152	  Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
153	  featured an AMD LANCE 10Mbit Ethernet controller on board; say Y
154	  here to compile in the Linux driver for this and enable Ethernet.
155	  General Linux information on the Sun 3 and 3x series (now
156	  discontinued) is at
157	  <http://www.angelfire.com/ca2/tech68k/sun3.html>.
158
159	  If you're not building a kernel for a Sun 3, say N.
160
161config SUNLANCE
162	tristate "Sun LANCE support"
163	depends on SBUS
164	select CRC32
165	---help---
166	  This driver supports the "le" interface present on all 32-bit Sparc
167	  systems, on some older Ultra systems and as an Sbus option.  These
168	  cards are based on the AMD LANCE chipset, which is better known
169	  via the NE2100 cards.
170
171	  To compile this driver as a module, choose M here: the module
172	  will be called sunlance.
173
174config AMD_XGBE
175	tristate "AMD 10GbE Ethernet driver"
176	depends on ((OF_NET && OF_ADDRESS) || ACPI || PCI) && HAS_IOMEM
177	depends on X86 || ARM64 || COMPILE_TEST
178	select BITREVERSE
179	select CRC32
180	select PHYLIB
181	select AMD_XGBE_HAVE_ECC if X86
182	imply PTP_1588_CLOCK
183	---help---
184	  This driver supports the AMD 10GbE Ethernet device found on an
185	  AMD SoC.
186
187	  To compile this driver as a module, choose M here: the module
188	  will be called amd-xgbe.
189
190config AMD_XGBE_DCB
191	bool "Data Center Bridging (DCB) support"
192	default n
193	depends on AMD_XGBE && DCB
194	---help---
195	  Say Y here to enable Data Center Bridging (DCB) support in the
196	  driver.
197
198	  If unsure, say N.
199
200config AMD_XGBE_HAVE_ECC
201	bool
202	default n
203
204endif # NET_VENDOR_AMD
205