xref: /openbmc/linux/drivers/net/ethernet/amd/Kconfig (revision 65ee8aeb) 
1#
2# AMD network device configuration
3#
4
5config NET_VENDOR_AMD
6	bool "AMD devices"
7	default y
8	depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
9		   SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
10		   (ARM && ARCH_EBSA110) || ISA || EISA || PCMCIA || ARM64
11	---help---
12	  If you have a network (Ethernet) chipset belonging to this class,
13	  say Y.
14
15	  Note that the answer to this question does not directly affect
16	  the kernel: saying N will just case the configurator to skip all
17	  the questions regarding AMD chipsets. If you say Y, you will be asked
18	  for your specific chipset/driver in the following questions.
19
20if NET_VENDOR_AMD
21
22config A2065
23	tristate "A2065 support"
24	depends on ZORRO
25	select CRC32
26	---help---
27	  If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
28	  say N.
29
30	  To compile this driver as a module, choose M here: the module
31	  will be called a2065.
32
33config AMD8111_ETH
34	tristate "AMD 8111 (new PCI LANCE) support"
35	depends on PCI
36	select CRC32
37	select MII
38	---help---
39	  If you have an AMD 8111-based PCI LANCE ethernet card,
40	  answer Y here and read the Ethernet-HOWTO, available from
41	  <http://www.tldp.org/docs.html#howto>.
42
43	  To compile this driver as a module, choose M here. The module
44	  will be called amd8111e.
45
46config LANCE
47	tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
48	depends on ISA && ISA_DMA_API && !ARM
49	---help---
50	  If you have a network (Ethernet) card of this type, say Y and read
51	  the Ethernet-HOWTO, available from
52	  <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
53	  of this type.
54
55	  To compile this driver as a module, choose M here: the module
56	  will be called lance.  This is recommended.
57
58config PCNET32
59	tristate "AMD PCnet32 PCI support"
60	depends on PCI
61	select CRC32
62	select MII
63	---help---
64	  If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
65	  answer Y here and read the Ethernet-HOWTO, available from
66	  <http://www.tldp.org/docs.html#howto>.
67
68	  To compile this driver as a module, choose M here. The module
69	  will be called pcnet32.
70
71config ARIADNE
72	tristate "Ariadne support"
73	depends on ZORRO
74	---help---
75	  If you have a Village Tronic Ariadne Ethernet adapter, say Y.
76	  Otherwise, say N.
77
78	  To compile this driver as a module, choose M here: the module
79	  will be called ariadne.
80
81config ARM_AM79C961A
82	bool "ARM EBSA110 AM79C961A support"
83	depends on ARM && ARCH_EBSA110
84	select CRC32
85	---help---
86	  If you wish to compile a kernel for the EBSA-110, then you should
87	  always answer Y to this.
88
89config ATARILANCE
90	tristate "Atari LANCE support"
91	depends on ATARI
92	---help---
93	  Say Y to include support for several Atari Ethernet adapters based
94	  on the AMD LANCE chipset: RieblCard (with or without battery), or
95	  PAMCard VME (also the version by Rhotron, with different addresses).
96
97config DECLANCE
98	tristate "DEC LANCE ethernet controller support"
99	depends on MACH_DECSTATION
100	select CRC32
101	---help---
102	  This driver is for the series of Ethernet controllers produced by
103	  DEC (now Compaq) based on the AMD LANCE chipset, including the
104	  DEPCA series.  (This chipset is better known via the NE2100 cards.)
105
106config HPLANCE
107	bool "HP on-board LANCE support"
108	depends on DIO
109	select CRC32
110	---help---
111	  If you want to use the builtin "LANCE" Ethernet controller on an
112	  HP300 machine, say Y here.
113
114config MIPS_AU1X00_ENET
115	tristate "MIPS AU1000 Ethernet support"
116	depends on MIPS_ALCHEMY
117	select PHYLIB
118	select CRC32
119	---help---
120	  If you have an Alchemy Semi AU1X00 based system
121	  say Y.  Otherwise, say N.
122
123config MVME147_NET
124	tristate "MVME147 (LANCE) Ethernet support"
125	depends on MVME147
126	select CRC32
127	---help---
128	  Support for the on-board Ethernet interface on the Motorola MVME147
129	  single-board computer.  Say Y here to include the
130	  driver for this chip in your kernel.
131	  To compile this driver as a module, choose M here.
132
133config PCMCIA_NMCLAN
134	tristate "New Media PCMCIA support"
135	depends on PCMCIA
136	help
137	  Say Y here if you intend to attach a New Media Ethernet or LiveWire
138	  PCMCIA (PC-card) Ethernet card to your computer.
139
140	  To compile this driver as a module, choose M here: the module will be
141	  called nmclan_cs.  If unsure, say N.
142
143config NI65
144	tristate "NI6510 support"
145	depends on ISA && ISA_DMA_API && !ARM
146	---help---
147	  If you have a network (Ethernet) card of this type, say Y and read
148	  the Ethernet-HOWTO, available from
149	  <http://www.tldp.org/docs.html#howto>.
150
151	  To compile this driver as a module, choose M here. The module
152	  will be called ni65.
153
154config SUN3LANCE
155	tristate "Sun3/Sun3x on-board LANCE support"
156	depends on (SUN3 || SUN3X)
157	---help---
158	  Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
159	  featured an AMD LANCE 10Mbit Ethernet controller on board; say Y
160	  here to compile in the Linux driver for this and enable Ethernet.
161	  General Linux information on the Sun 3 and 3x series (now
162	  discontinued) is at
163	  <http://www.angelfire.com/ca2/tech68k/sun3.html>.
164
165	  If you're not building a kernel for a Sun 3, say N.
166
167config SUNLANCE
168	tristate "Sun LANCE support"
169	depends on SBUS
170	select CRC32
171	---help---
172	  This driver supports the "le" interface present on all 32-bit Sparc
173	  systems, on some older Ultra systems and as an Sbus option.  These
174	  cards are based on the AMD LANCE chipset, which is better known
175	  via the NE2100 cards.
176
177	  To compile this driver as a module, choose M here: the module
178	  will be called sunlance.
179
180config AMD_XGBE
181	tristate "AMD 10GbE Ethernet driver"
182	depends on (OF_NET || ACPI) && HAS_IOMEM && HAS_DMA
183	depends on ARM64 || COMPILE_TEST
184	select PHYLIB
185	select AMD_XGBE_PHY
186	select BITREVERSE
187	select CRC32
188	select PTP_1588_CLOCK
189	---help---
190	  This driver supports the AMD 10GbE Ethernet device found on an
191	  AMD SoC.
192
193	  To compile this driver as a module, choose M here: the module
194	  will be called amd-xgbe.
195
196config AMD_XGBE_DCB
197	bool "Data Center Bridging (DCB) support"
198	default n
199	depends on AMD_XGBE && DCB
200	---help---
201	  Say Y here to enable Data Center Bridging (DCB) support in the
202	  driver.
203
204	  If unsure, say N.
205
206endif # NET_VENDOR_AMD
207