1# SPDX-License-Identifier: GPL-2.0-only 2# 3# AMD network device configuration 4# 5 6config NET_VENDOR_AMD 7 bool "AMD devices" 8 default y 9 depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \ 10 SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \ 11 (ARM && ARCH_EBSA110) || ISA || EISA || PCMCIA || ARM64 12 ---help--- 13 If you have a network (Ethernet) chipset belonging to this class, 14 say Y. 15 16 Note that the answer to this question does not directly affect 17 the kernel: saying N will just cause the configurator to skip all 18 the questions regarding AMD chipsets. If you say Y, you will be asked 19 for your specific chipset/driver in the following questions. 20 21if NET_VENDOR_AMD 22 23config A2065 24 tristate "A2065 support" 25 depends on ZORRO 26 select CRC32 27 ---help--- 28 If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise, 29 say N. 30 31 To compile this driver as a module, choose M here: the module 32 will be called a2065. 33 34config AMD8111_ETH 35 tristate "AMD 8111 (new PCI LANCE) support" 36 depends on PCI 37 select CRC32 38 select MII 39 ---help--- 40 If you have an AMD 8111-based PCI LANCE ethernet card, 41 answer Y here. 42 43 To compile this driver as a module, choose M here. The module 44 will be called amd8111e. 45 46config LANCE 47 tristate "AMD LANCE and PCnet (AT1500 and NE2100) support" 48 depends on ISA && ISA_DMA_API && !ARM && !PPC32 49 ---help--- 50 If you have a network (Ethernet) card of this type, say Y here. 51 Some LinkSys cards are of this type. 52 53 To compile this driver as a module, choose M here: the module 54 will be called lance. This is recommended. 55 56config PCNET32 57 tristate "AMD PCnet32 PCI support" 58 depends on PCI 59 select CRC32 60 select MII 61 ---help--- 62 If you have a PCnet32 or PCnetPCI based network (Ethernet) card, 63 answer Y here. 64 65 To compile this driver as a module, choose M here. The module 66 will be called pcnet32. 67 68config ARIADNE 69 tristate "Ariadne support" 70 depends on ZORRO 71 ---help--- 72 If you have a Village Tronic Ariadne Ethernet adapter, say Y. 73 Otherwise, say N. 74 75 To compile this driver as a module, choose M here: the module 76 will be called ariadne. 77 78config ARM_AM79C961A 79 bool "ARM EBSA110 AM79C961A support" 80 depends on ARM && ARCH_EBSA110 81 select CRC32 82 ---help--- 83 If you wish to compile a kernel for the EBSA-110, then you should 84 always answer Y to this. 85 86config ATARILANCE 87 tristate "Atari LANCE support" 88 depends on ATARI 89 ---help--- 90 Say Y to include support for several Atari Ethernet adapters based 91 on the AMD LANCE chipset: RieblCard (with or without battery), or 92 PAMCard VME (also the version by Rhotron, with different addresses). 93 94config DECLANCE 95 tristate "DEC LANCE ethernet controller support" 96 depends on MACH_DECSTATION 97 select CRC32 98 ---help--- 99 This driver is for the series of Ethernet controllers produced by 100 DEC (now Compaq) based on the AMD LANCE chipset, including the 101 DEPCA series. (This chipset is better known via the NE2100 cards.) 102 103config HPLANCE 104 tristate "HP on-board LANCE support" 105 depends on DIO 106 select CRC32 107 ---help--- 108 If you want to use the builtin "LANCE" Ethernet controller on an 109 HP300 machine, say Y here. 110 111config MIPS_AU1X00_ENET 112 tristate "MIPS AU1000 Ethernet support" 113 depends on MIPS_ALCHEMY 114 select PHYLIB 115 select CRC32 116 ---help--- 117 If you have an Alchemy Semi AU1X00 based system 118 say Y. Otherwise, say N. 119 120config MVME147_NET 121 tristate "MVME147 (LANCE) Ethernet support" 122 depends on MVME147 123 select CRC32 124 ---help--- 125 Support for the on-board Ethernet interface on the Motorola MVME147 126 single-board computer. Say Y here to include the 127 driver for this chip in your kernel. 128 To compile this driver as a module, choose M here. 129 130config PCMCIA_NMCLAN 131 tristate "New Media PCMCIA support" 132 depends on PCMCIA 133 help 134 Say Y here if you intend to attach a New Media Ethernet or LiveWire 135 PCMCIA (PC-card) Ethernet card to your computer. 136 137 To compile this driver as a module, choose M here: the module will be 138 called nmclan_cs. If unsure, say N. 139 140config NI65 141 tristate "NI6510 support" 142 depends on ISA && ISA_DMA_API && !ARM && !PPC32 143 ---help--- 144 If you have a network (Ethernet) card of this type, say Y here. 145 146 To compile this driver as a module, choose M here. The module 147 will be called ni65. 148 149config SUN3LANCE 150 tristate "Sun3/Sun3x on-board LANCE support" 151 depends on (SUN3 || SUN3X) 152 ---help--- 153 Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80) 154 featured an AMD LANCE 10Mbit Ethernet controller on board; say Y 155 here to compile in the Linux driver for this and enable Ethernet. 156 General Linux information on the Sun 3 and 3x series (now 157 discontinued) is at 158 <http://www.angelfire.com/ca2/tech68k/sun3.html>. 159 160 If you're not building a kernel for a Sun 3, say N. 161 162config SUNLANCE 163 tristate "Sun LANCE support" 164 depends on SBUS 165 select CRC32 166 ---help--- 167 This driver supports the "le" interface present on all 32-bit Sparc 168 systems, on some older Ultra systems and as an Sbus option. These 169 cards are based on the AMD LANCE chipset, which is better known 170 via the NE2100 cards. 171 172 To compile this driver as a module, choose M here: the module 173 will be called sunlance. 174 175config AMD_XGBE 176 tristate "AMD 10GbE Ethernet driver" 177 depends on ((OF_NET && OF_ADDRESS) || ACPI || PCI) && HAS_IOMEM 178 depends on X86 || ARM64 || COMPILE_TEST 179 select BITREVERSE 180 select CRC32 181 select PHYLIB 182 select AMD_XGBE_HAVE_ECC if X86 183 imply PTP_1588_CLOCK 184 ---help--- 185 This driver supports the AMD 10GbE Ethernet device found on an 186 AMD SoC. 187 188 To compile this driver as a module, choose M here: the module 189 will be called amd-xgbe. 190 191config AMD_XGBE_DCB 192 bool "Data Center Bridging (DCB) support" 193 default n 194 depends on AMD_XGBE && DCB 195 ---help--- 196 Say Y here to enable Data Center Bridging (DCB) support in the 197 driver. 198 199 If unsure, say N. 200 201config AMD_XGBE_HAVE_ECC 202 bool 203 default n 204 205endif # NET_VENDOR_AMD 206