xref: /openbmc/linux/drivers/net/ethernet/amd/Kconfig (revision 3180b64a)
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# AMD network device configuration
4#
5
6config NET_VENDOR_AMD
7	bool "AMD devices"
8	default y
9	depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
10		   SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
11		   (ARM && ARCH_EBSA110) || ISA || EISA || PCMCIA || ARM64
12	help
13	  If you have a network (Ethernet) chipset belonging to this class,
14	  say Y.
15
16	  Note that the answer to this question does not directly affect
17	  the kernel: saying N will just cause the configurator to skip all
18	  the questions regarding AMD chipsets. If you say Y, you will be asked
19	  for your specific chipset/driver in the following questions.
20
21if NET_VENDOR_AMD
22
23config A2065
24	tristate "A2065 support"
25	depends on ZORRO
26	select CRC32
27	help
28	  If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
29	  say N.
30
31	  To compile this driver as a module, choose M here: the module
32	  will be called a2065.
33
34config AMD8111_ETH
35	tristate "AMD 8111 (new PCI LANCE) support"
36	depends on PCI
37	select CRC32
38	select MII
39	help
40	  If you have an AMD 8111-based PCI LANCE ethernet card,
41	  answer Y here.
42
43	  To compile this driver as a module, choose M here. The module
44	  will be called amd8111e.
45
46config LANCE
47	tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
48	depends on ISA && ISA_DMA_API && !ARM && !PPC32
49	help
50	  If you have a network (Ethernet) card of this type, say Y here.
51	  Some LinkSys cards are of this type.
52
53	  To compile this driver as a module, choose M here: the module
54	  will be called lance.  This is recommended.
55
56config PCNET32
57	tristate "AMD PCnet32 PCI support"
58	depends on PCI
59	select CRC32
60	select MII
61	help
62	  If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
63	  answer Y here.
64
65	  To compile this driver as a module, choose M here. The module
66	  will be called pcnet32.
67
68config ARIADNE
69	tristate "Ariadne support"
70	depends on ZORRO
71	help
72	  If you have a Village Tronic Ariadne Ethernet adapter, say Y.
73	  Otherwise, say N.
74
75	  To compile this driver as a module, choose M here: the module
76	  will be called ariadne.
77
78config ARM_AM79C961A
79	bool "ARM EBSA110 AM79C961A support"
80	depends on ARM && ARCH_EBSA110
81	select CRC32
82	help
83	  If you wish to compile a kernel for the EBSA-110, then you should
84	  always answer Y to this.
85
86config ATARILANCE
87	tristate "Atari LANCE support"
88	depends on ATARI
89	help
90	  Say Y to include support for several Atari Ethernet adapters based
91	  on the AMD LANCE chipset: RieblCard (with or without battery), or
92	  PAMCard VME (also the version by Rhotron, with different addresses).
93
94config DECLANCE
95	tristate "DEC LANCE ethernet controller support"
96	depends on MACH_DECSTATION
97	select CRC32
98	help
99	  This driver is for the series of Ethernet controllers produced by
100	  DEC (now Compaq) based on the AMD LANCE chipset, including the
101	  DEPCA series.  (This chipset is better known via the NE2100 cards.)
102
103config HPLANCE
104	tristate "HP on-board LANCE support"
105	depends on DIO
106	select CRC32
107	help
108	  If you want to use the builtin "LANCE" Ethernet controller on an
109	  HP300 machine, say Y here.
110
111config MIPS_AU1X00_ENET
112	tristate "MIPS AU1000 Ethernet support"
113	depends on MIPS_ALCHEMY
114	select PHYLIB
115	select CRC32
116	help
117	  If you have an Alchemy Semi AU1X00 based system
118	  say Y.  Otherwise, say N.
119
120config MVME147_NET
121	tristate "MVME147 (LANCE) Ethernet support"
122	depends on MVME147
123	select CRC32
124	help
125	  Support for the on-board Ethernet interface on the Motorola MVME147
126	  single-board computer.  Say Y here to include the
127	  driver for this chip in your kernel.
128	  To compile this driver as a module, choose M here.
129
130config PCMCIA_NMCLAN
131	tristate "New Media PCMCIA support"
132	depends on PCMCIA
133	help
134	  Say Y here if you intend to attach a New Media Ethernet or LiveWire
135	  PCMCIA (PC-card) Ethernet card to your computer.
136
137	  To compile this driver as a module, choose M here: the module will be
138	  called nmclan_cs.  If unsure, say N.
139
140config NI65
141	tristate "NI6510 support"
142	depends on ISA && ISA_DMA_API && !ARM && !PPC32
143	help
144	  If you have a network (Ethernet) card of this type, say Y here.
145
146	  To compile this driver as a module, choose M here. The module
147	  will be called ni65.
148
149config SUN3LANCE
150	tristate "Sun3/Sun3x on-board LANCE support"
151	depends on (SUN3 || SUN3X)
152	help
153	  Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
154	  featured an AMD LANCE 10Mbit Ethernet controller on board; say Y
155	  here to compile in the Linux driver for this and enable Ethernet.
156	  General Linux information on the Sun 3 and 3x series (now
157	  discontinued) is at
158	  <http://www.angelfire.com/ca2/tech68k/sun3.html>.
159
160	  If you're not building a kernel for a Sun 3, say N.
161
162config SUNLANCE
163	tristate "Sun LANCE support"
164	depends on SBUS
165	select CRC32
166	help
167	  This driver supports the "le" interface present on all 32-bit Sparc
168	  systems, on some older Ultra systems and as an Sbus option.  These
169	  cards are based on the AMD LANCE chipset, which is better known
170	  via the NE2100 cards.
171
172	  To compile this driver as a module, choose M here: the module
173	  will be called sunlance.
174
175config AMD_XGBE
176	tristate "AMD 10GbE Ethernet driver"
177	depends on ((OF_NET && OF_ADDRESS) || ACPI || PCI) && HAS_IOMEM
178	depends on X86 || ARM64 || COMPILE_TEST
179	select BITREVERSE
180	select CRC32
181	select PHYLIB
182	select AMD_XGBE_HAVE_ECC if X86
183	imply PTP_1588_CLOCK
184	help
185	  This driver supports the AMD 10GbE Ethernet device found on an
186	  AMD SoC.
187
188	  To compile this driver as a module, choose M here: the module
189	  will be called amd-xgbe.
190
191config AMD_XGBE_DCB
192	bool "Data Center Bridging (DCB) support"
193	default n
194	depends on AMD_XGBE && DCB
195	help
196	  Say Y here to enable Data Center Bridging (DCB) support in the
197	  driver.
198
199	  If unsure, say N.
200
201config AMD_XGBE_HAVE_ECC
202	bool
203	default n
204
205endif # NET_VENDOR_AMD
206