1# SPDX-License-Identifier: GPL-2.0-only 2# 3# AMD network device configuration 4# 5 6config NET_VENDOR_AMD 7 bool "AMD devices" 8 default y 9 depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \ 10 SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \ 11 ISA || EISA || PCMCIA || ARM64 12 help 13 If you have a network (Ethernet) chipset belonging to this class, 14 say Y. 15 16 Note that the answer to this question does not directly affect 17 the kernel: saying N will just cause the configurator to skip all 18 the questions regarding AMD chipsets. If you say Y, you will be asked 19 for your specific chipset/driver in the following questions. 20 21if NET_VENDOR_AMD 22 23config A2065 24 tristate "A2065 support" 25 depends on ZORRO 26 select CRC32 27 help 28 If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise, 29 say N. 30 31 To compile this driver as a module, choose M here: the module 32 will be called a2065. 33 34config AMD8111_ETH 35 tristate "AMD 8111 (new PCI LANCE) support" 36 depends on PCI 37 select CRC32 38 select MII 39 help 40 If you have an AMD 8111-based PCI LANCE ethernet card, 41 answer Y here. 42 43 To compile this driver as a module, choose M here. The module 44 will be called amd8111e. 45 46config LANCE 47 tristate "AMD LANCE and PCnet (AT1500 and NE2100) support" 48 depends on ISA && ISA_DMA_API && !ARM && !PPC32 49 select NETDEV_LEGACY_INIT 50 help 51 If you have a network (Ethernet) card of this type, say Y here. 52 Some LinkSys cards are of this type. 53 54 To compile this driver as a module, choose M here: the module 55 will be called lance. This is recommended. 56 57config PCNET32 58 tristate "AMD PCnet32 PCI support" 59 depends on PCI 60 select CRC32 61 select MII 62 help 63 If you have a PCnet32 or PCnetPCI based network (Ethernet) card, 64 answer Y here. 65 66 To compile this driver as a module, choose M here. The module 67 will be called pcnet32. 68 69config ARIADNE 70 tristate "Ariadne support" 71 depends on ZORRO 72 help 73 If you have a Village Tronic Ariadne Ethernet adapter, say Y. 74 Otherwise, say N. 75 76 To compile this driver as a module, choose M here: the module 77 will be called ariadne. 78 79config ATARILANCE 80 tristate "Atari LANCE support" 81 depends on ATARI 82 help 83 Say Y to include support for several Atari Ethernet adapters based 84 on the AMD LANCE chipset: RieblCard (with or without battery), or 85 PAMCard VME (also the version by Rhotron, with different addresses). 86 87config DECLANCE 88 tristate "DEC LANCE ethernet controller support" 89 depends on MACH_DECSTATION 90 select CRC32 91 help 92 This driver is for the series of Ethernet controllers produced by 93 DEC (now Compaq) based on the AMD LANCE chipset, including the 94 DEPCA series. (This chipset is better known via the NE2100 cards.) 95 96config HPLANCE 97 tristate "HP on-board LANCE support" 98 depends on DIO 99 select CRC32 100 help 101 If you want to use the builtin "LANCE" Ethernet controller on an 102 HP300 machine, say Y here. 103 104config MIPS_AU1X00_ENET 105 tristate "MIPS AU1000 Ethernet support" 106 depends on MIPS_ALCHEMY 107 select PHYLIB 108 select CRC32 109 help 110 If you have an Alchemy Semi AU1X00 based system 111 say Y. Otherwise, say N. 112 113config MVME147_NET 114 tristate "MVME147 (LANCE) Ethernet support" 115 depends on MVME147 116 select CRC32 117 help 118 Support for the on-board Ethernet interface on the Motorola MVME147 119 single-board computer. Say Y here to include the 120 driver for this chip in your kernel. 121 To compile this driver as a module, choose M here. 122 123config PCMCIA_NMCLAN 124 tristate "New Media PCMCIA support" 125 depends on PCMCIA 126 help 127 Say Y here if you intend to attach a New Media Ethernet or LiveWire 128 PCMCIA (PC-card) Ethernet card to your computer. 129 130 To compile this driver as a module, choose M here: the module will be 131 called nmclan_cs. If unsure, say N. 132 133config NI65 134 tristate "NI6510 support" 135 depends on ISA && ISA_DMA_API && !ARM && !PPC32 136 select NETDEV_LEGACY_INIT 137 help 138 If you have a network (Ethernet) card of this type, say Y here. 139 140 To compile this driver as a module, choose M here. The module 141 will be called ni65. 142 143config SUN3LANCE 144 tristate "Sun3/Sun3x on-board LANCE support" 145 depends on (SUN3 || SUN3X) 146 help 147 Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80) 148 featured an AMD LANCE 10Mbit Ethernet controller on board; say Y 149 here to compile in the Linux driver for this and enable Ethernet. 150 General Linux information on the Sun 3 and 3x series (now 151 discontinued) is at 152 <http://www.angelfire.com/ca2/tech68k/sun3.html>. 153 154 If you're not building a kernel for a Sun 3, say N. 155 156config SUNLANCE 157 tristate "Sun LANCE support" 158 depends on SBUS 159 select CRC32 160 help 161 This driver supports the "le" interface present on all 32-bit Sparc 162 systems, on some older Ultra systems and as an Sbus option. These 163 cards are based on the AMD LANCE chipset, which is better known 164 via the NE2100 cards. 165 166 To compile this driver as a module, choose M here: the module 167 will be called sunlance. 168 169config AMD_XGBE 170 tristate "AMD 10GbE Ethernet driver" 171 depends on ((OF_NET && OF_ADDRESS) || ACPI || PCI) && HAS_IOMEM 172 depends on X86 || ARM64 || COMPILE_TEST 173 depends on PTP_1588_CLOCK_OPTIONAL 174 select BITREVERSE 175 select CRC32 176 select PHYLIB 177 select AMD_XGBE_HAVE_ECC if X86 178 help 179 This driver supports the AMD 10GbE Ethernet device found on an 180 AMD SoC. 181 182 To compile this driver as a module, choose M here: the module 183 will be called amd-xgbe. 184 185config AMD_XGBE_DCB 186 bool "Data Center Bridging (DCB) support" 187 default n 188 depends on AMD_XGBE && DCB 189 help 190 Say Y here to enable Data Center Bridging (DCB) support in the 191 driver. 192 193 If unsure, say N. 194 195config AMD_XGBE_HAVE_ECC 196 bool 197 default n 198 199endif # NET_VENDOR_AMD 200