xref: /openbmc/linux/drivers/net/ethernet/amd/Kconfig (revision 0545810f)
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# AMD network device configuration
4#
5
6config NET_VENDOR_AMD
7	bool "AMD devices"
8	default y
9	depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
10		   SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
11		   ISA || EISA || PCMCIA || ARM64
12	help
13	  If you have a network (Ethernet) chipset belonging to this class,
14	  say Y.
15
16	  Note that the answer to this question does not directly affect
17	  the kernel: saying N will just cause the configurator to skip all
18	  the questions regarding AMD chipsets. If you say Y, you will be asked
19	  for your specific chipset/driver in the following questions.
20
21if NET_VENDOR_AMD
22
23config A2065
24	tristate "A2065 support"
25	depends on ZORRO
26	select CRC32
27	help
28	  If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
29	  say N.
30
31	  To compile this driver as a module, choose M here: the module
32	  will be called a2065.
33
34config AMD8111_ETH
35	tristate "AMD 8111 (new PCI LANCE) support"
36	depends on PCI
37	select CRC32
38	select MII
39	help
40	  If you have an AMD 8111-based PCI LANCE ethernet card,
41	  answer Y here.
42
43	  To compile this driver as a module, choose M here. The module
44	  will be called amd8111e.
45
46config LANCE
47	tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
48	depends on ISA && ISA_DMA_API && !ARM && !PPC32
49	select NETDEV_LEGACY_INIT
50	help
51	  If you have a network (Ethernet) card of this type, say Y here.
52	  Some LinkSys cards are of this type.
53
54	  To compile this driver as a module, choose M here: the module
55	  will be called lance.  This is recommended.
56
57config PCNET32
58	tristate "AMD PCnet32 PCI support"
59	depends on PCI
60	select CRC32
61	select MII
62	help
63	  If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
64	  answer Y here.
65
66	  To compile this driver as a module, choose M here. The module
67	  will be called pcnet32.
68
69config ARIADNE
70	tristate "Ariadne support"
71	depends on ZORRO
72	help
73	  If you have a Village Tronic Ariadne Ethernet adapter, say Y.
74	  Otherwise, say N.
75
76	  To compile this driver as a module, choose M here: the module
77	  will be called ariadne.
78
79config ATARILANCE
80	tristate "Atari LANCE support"
81	depends on ATARI
82	help
83	  Say Y to include support for several Atari Ethernet adapters based
84	  on the AMD LANCE chipset: RieblCard (with or without battery), or
85	  PAMCard VME (also the version by Rhotron, with different addresses).
86
87config DECLANCE
88	tristate "DEC LANCE ethernet controller support"
89	depends on MACH_DECSTATION
90	select CRC32
91	help
92	  This driver is for the series of Ethernet controllers produced by
93	  DEC (now Compaq) based on the AMD LANCE chipset, including the
94	  DEPCA series.  (This chipset is better known via the NE2100 cards.)
95
96config HPLANCE
97	tristate "HP on-board LANCE support"
98	depends on DIO
99	select CRC32
100	help
101	  If you want to use the builtin "LANCE" Ethernet controller on an
102	  HP300 machine, say Y here.
103
104config MIPS_AU1X00_ENET
105	tristate "MIPS AU1000 Ethernet support"
106	depends on MIPS_ALCHEMY
107	select PHYLIB
108	select CRC32
109	help
110	  If you have an Alchemy Semi AU1X00 based system
111	  say Y.  Otherwise, say N.
112
113config MVME147_NET
114	tristate "MVME147 (LANCE) Ethernet support"
115	depends on MVME147
116	select CRC32
117	help
118	  Support for the on-board Ethernet interface on the Motorola MVME147
119	  single-board computer.  Say Y here to include the
120	  driver for this chip in your kernel.
121	  To compile this driver as a module, choose M here.
122
123config PCMCIA_NMCLAN
124	tristate "New Media PCMCIA support"
125	depends on PCMCIA
126	help
127	  Say Y here if you intend to attach a New Media Ethernet or LiveWire
128	  PCMCIA (PC-card) Ethernet card to your computer.
129
130	  To compile this driver as a module, choose M here: the module will be
131	  called nmclan_cs.  If unsure, say N.
132
133config SUN3LANCE
134	tristate "Sun3/Sun3x on-board LANCE support"
135	depends on (SUN3 || SUN3X)
136	help
137	  Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
138	  featured an AMD LANCE 10Mbit Ethernet controller on board; say Y
139	  here to compile in the Linux driver for this and enable Ethernet.
140	  General Linux information on the Sun 3 and 3x series (now
141	  discontinued) is at
142	  <http://www.angelfire.com/ca2/tech68k/sun3.html>.
143
144	  If you're not building a kernel for a Sun 3, say N.
145
146config SUNLANCE
147	tristate "Sun LANCE support"
148	depends on SBUS
149	select CRC32
150	help
151	  This driver supports the "le" interface present on all 32-bit Sparc
152	  systems, on some older Ultra systems and as an Sbus option.  These
153	  cards are based on the AMD LANCE chipset, which is better known
154	  via the NE2100 cards.
155
156	  To compile this driver as a module, choose M here: the module
157	  will be called sunlance.
158
159config AMD_XGBE
160	tristate "AMD 10GbE Ethernet driver"
161	depends on (OF_ADDRESS || ACPI || PCI) && HAS_IOMEM
162	depends on X86 || ARM64 || COMPILE_TEST
163	depends on PTP_1588_CLOCK_OPTIONAL
164	select BITREVERSE
165	select CRC32
166	select PHYLIB
167	select AMD_XGBE_HAVE_ECC if X86
168	help
169	  This driver supports the AMD 10GbE Ethernet device found on an
170	  AMD SoC.
171
172	  To compile this driver as a module, choose M here: the module
173	  will be called amd-xgbe.
174
175config AMD_XGBE_DCB
176	bool "Data Center Bridging (DCB) support"
177	default n
178	depends on AMD_XGBE && DCB
179	help
180	  Say Y here to enable Data Center Bridging (DCB) support in the
181	  driver.
182
183	  If unsure, say N.
184
185config AMD_XGBE_HAVE_ECC
186	bool
187	default n
188
189config PDS_CORE
190	tristate "AMD/Pensando Data Systems Core Device Support"
191	depends on 64BIT && PCI
192	select AUXILIARY_BUS
193	select NET_DEVLINK
194	help
195	  This enables the support for the AMD/Pensando Core device family of
196	  adapters.  More specific information on this driver can be
197	  found in
198	  <file:Documentation/networking/device_drivers/ethernet/amd/pds_core.rst>.
199
200	  To compile this driver as a module, choose M here. The module
201	  will be called pds_core.
202
203endif # NET_VENDOR_AMD
204